Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 418 insertions, 0 deletions

diff --git a/drivers/media/i2c/tda7432.c b/drivers/media/i2c/tda7432.c
new file mode 100644
index 000000000..9b4f21237
--- /dev/null
+++ b/drivers/media/i2c/tda7432.c
@@ -0,0 +1,418 @@
+/*
+ * For the STS-Thompson TDA7432 audio processor chip
+ *
+ * Handles audio functions: volume, balance, tone, loudness
+ * This driver will not complain if used with any
+ * other i2c device with the same address.
+ *
+ * Muting and tone control by Jonathan Isom <jisom@ematic.com>
+ *
+ * Copyright (c) 2000 Eric Sandeen <eric_sandeen@bigfoot.com>
+ * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@kernel.org>
+ * This code is placed under the terms of the GNU General Public License
+ * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu)
+ * Which was based on tda8425.c by Greg Alexander (c) 1998
+ *
+ * OPTIONS:
+ * debug    - set to 1 if you'd like to see debug messages
+ *            set to 2 if you'd like to be inundated with debug messages
+ *
+ * loudness - set between 0 and 15 for varying degrees of loudness effect
+ *
+ * maxvol   - set maximium volume to +20db (1), default is 0db(0)
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+
+#ifndef VIDEO_AUDIO_BALANCE
+# define VIDEO_AUDIO_BALANCE 32
+#endif
+
+MODULE_AUTHOR("Eric Sandeen <eric_sandeen@bigfoot.com>");
+MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip");
+MODULE_LICENSE("GPL");
+
+static int maxvol;
+static int loudness; /* disable loudness by default */
+static int debug;	 /* insmod parameter */
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Set debugging level from 0 to 3. Default is off(0).");
+module_param(loudness, int, S_IRUGO);
+MODULE_PARM_DESC(loudness, "Turn loudness on(1) else off(0). Default is off(0).");
+module_param(maxvol, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(maxvol, "Set maximium volume to +20dB(0) else +0dB(1). Default is +20dB(0).");
+
+
+/* Structure of address and subaddresses for the tda7432 */
+
+struct tda7432 {
+	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
+	struct {
+		/* bass/treble cluster */
+		struct v4l2_ctrl *bass;
+		struct v4l2_ctrl *treble;
+	};
+	struct {
+		/* mute/balance cluster */
+		struct v4l2_ctrl *mute;
+		struct v4l2_ctrl *balance;
+	};
+};
+
+static inline struct tda7432 *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct tda7432, sd);
+}
+
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct tda7432, hdl)->sd;
+}
+
+/* The TDA7432 is made by STS-Thompson
+ * http://www.st.com
+ * http://us.st.com/stonline/books/pdf/docs/4056.pdf
+ *
+ * TDA7432: I2C-bus controlled basic audio processor
+ *
+ * The TDA7432 controls basic audio functions like volume, balance,
+ * and tone control (including loudness).  It also has four channel
+ * output (for front and rear).  Since most vidcap cards probably
+ * don't have 4 channel output, this driver will set front & rear
+ * together (no independent control).
+ */
+
+		/* Subaddresses for TDA7432 */
+
+#define TDA7432_IN	0x00 /* Input select                 */
+#define TDA7432_VL	0x01 /* Volume                       */
+#define TDA7432_TN	0x02 /* Bass, Treble (Tone)          */
+#define TDA7432_LF	0x03 /* Attenuation LF (Left Front)  */
+#define TDA7432_LR	0x04 /* Attenuation LR (Left Rear)   */
+#define TDA7432_RF	0x05 /* Attenuation RF (Right Front) */
+#define TDA7432_RR	0x06 /* Attenuation RR (Right Rear)  */
+#define TDA7432_LD	0x07 /* Loudness                     */
+
+
+		/* Masks for bits in TDA7432 subaddresses */
+
+/* Many of these not used - just for documentation */
+
+/* Subaddress 0x00 - Input selection and bass control */
+
+/* Bits 0,1,2 control input:
+ * 0x00 - Stereo input
+ * 0x02 - Mono input
+ * 0x03 - Mute  (Using Attenuators Plays better with modules)
+ * Mono probably isn't used - I'm guessing only the stereo
+ * input is connected on most cards, so we'll set it to stereo.
+ *
+ * Bit 3 controls bass cut: 0/1 is non-symmetric/symmetric bass cut
+ * Bit 4 controls bass range: 0/1 is extended/standard bass range
+ *
+ * Highest 3 bits not used
+ */
+
+#define TDA7432_STEREO_IN	0
+#define TDA7432_MONO_IN		2	/* Probably won't be used */
+#define TDA7432_BASS_SYM	1 << 3
+#define TDA7432_BASS_NORM	1 << 4
+
+/* Subaddress 0x01 - Volume */
+
+/* Lower 7 bits control volume from -79dB to +32dB in 1dB steps
+ * Recommended maximum is +20 dB
+ *
+ * +32dB: 0x00
+ * +20dB: 0x0c
+ *   0dB: 0x20
+ * -79dB: 0x6f
+ *
+ * MSB (bit 7) controls loudness: 1/0 is loudness on/off
+ */
+
+#define	TDA7432_VOL_0DB		0x20
+#define TDA7432_LD_ON		1 << 7
+
+
+/* Subaddress 0x02 - Tone control */
+
+/* Bits 0,1,2 control absolute treble gain from 0dB to 14dB
+ * 0x0 is 14dB, 0x7 is 0dB
+ *
+ * Bit 3 controls treble attenuation/gain (sign)
+ * 1 = gain (+)
+ * 0 = attenuation (-)
+ *
+ * Bits 4,5,6 control absolute bass gain from 0dB to 14dB
+ * (This is only true for normal base range, set in 0x00)
+ * 0x0 << 4 is 14dB, 0x7 is 0dB
+ *
+ * Bit 7 controls bass attenuation/gain (sign)
+ * 1 << 7 = gain (+)
+ * 0 << 7 = attenuation (-)
+ *
+ * Example:
+ * 1 1 0 1 0 1 0 1 is +4dB bass, -4dB treble
+ */
+
+#define TDA7432_TREBLE_0DB		0xf
+#define TDA7432_TREBLE			7
+#define TDA7432_TREBLE_GAIN		1 << 3
+#define TDA7432_BASS_0DB		0xf
+#define TDA7432_BASS			7 << 4
+#define TDA7432_BASS_GAIN		1 << 7
+
+
+/* Subaddress 0x03 - Left  Front attenuation */
+/* Subaddress 0x04 - Left  Rear  attenuation */
+/* Subaddress 0x05 - Right Front attenuation */
+/* Subaddress 0x06 - Right Rear  attenuation */
+
+/* Bits 0,1,2,3,4 control attenuation from 0dB to -37.5dB
+ * in 1.5dB steps.
+ *
+ * 0x00 is     0dB
+ * 0x1f is -37.5dB
+ *
+ * Bit 5 mutes that channel when set (1 = mute, 0 = unmute)
+ * We'll use the mute on the input, though (above)
+ * Bits 6,7 unused
+ */
+
+#define TDA7432_ATTEN_0DB	0x00
+#define TDA7432_MUTE        0x1 << 5
+
+
+/* Subaddress 0x07 - Loudness Control */
+
+/* Bits 0,1,2,3 control loudness from 0dB to -15dB in 1dB steps
+ * when bit 4 is NOT set
+ *
+ * 0x0 is   0dB
+ * 0xf is -15dB
+ *
+ * If bit 4 is set, then there is a flat attenuation according to
+ * the lower 4 bits, as above.
+ *
+ * Bits 5,6,7 unused
+ */
+
+
+
+/* Begin code */
+
+static int tda7432_write(struct v4l2_subdev *sd, int subaddr, int val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	unsigned char buffer[2];
+
+	v4l2_dbg(2, debug, sd, "In tda7432_write\n");
+	v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val);
+	buffer[0] = subaddr;
+	buffer[1] = val;
+	if (2 != i2c_master_send(client, buffer, 2)) {
+		v4l2_err(sd, "I/O error, trying (write %d 0x%x)\n",
+		       subaddr, val);
+		return -1;
+	}
+	return 0;
+}
+
+static int tda7432_set(struct v4l2_subdev *sd)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	unsigned char buf[16];
+
+	buf[0]  = TDA7432_IN;
+	buf[1]  = TDA7432_STEREO_IN |  /* Main (stereo) input   */
+		  TDA7432_BASS_SYM  |  /* Symmetric bass cut    */
+		  TDA7432_BASS_NORM;   /* Normal bass range     */
+	buf[2]  = 0x3b;
+	if (loudness)			 /* Turn loudness on?     */
+		buf[2] |= TDA7432_LD_ON;
+	buf[3]  = TDA7432_TREBLE_0DB | (TDA7432_BASS_0DB << 4);
+	buf[4]  = TDA7432_ATTEN_0DB;
+	buf[5]  = TDA7432_ATTEN_0DB;
+	buf[6]  = TDA7432_ATTEN_0DB;
+	buf[7]  = TDA7432_ATTEN_0DB;
+	buf[8]  = loudness;
+	if (9 != i2c_master_send(client, buf, 9)) {
+		v4l2_err(sd, "I/O error, trying tda7432_set\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int tda7432_log_status(struct v4l2_subdev *sd)
+{
+	struct tda7432 *state = to_state(sd);
+
+	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
+	return 0;
+}
+
+static int tda7432_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct v4l2_subdev *sd = to_sd(ctrl);
+	struct tda7432 *t = to_state(sd);
+	u8 bass, treble, volume;
+	u8 lf, lr, rf, rr;
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		if (t->balance->val < 0) {
+			/* shifted to left, attenuate right */
+			rr = rf = -t->balance->val;
+			lr = lf = TDA7432_ATTEN_0DB;
+		} else if (t->balance->val > 0) {
+			/* shifted to right, attenuate left */
+			rr = rf = TDA7432_ATTEN_0DB;
+			lr = lf = t->balance->val;
+		} else {
+			/* centered */
+			rr = rf = TDA7432_ATTEN_0DB;
+			lr = lf = TDA7432_ATTEN_0DB;
+		}
+		if (t->mute->val) {
+			lf |= TDA7432_MUTE;
+			lr |= TDA7432_MUTE;
+			rf |= TDA7432_MUTE;
+			rr |= TDA7432_MUTE;
+		}
+		/* Mute & update balance*/
+		tda7432_write(sd, TDA7432_LF, lf);
+		tda7432_write(sd, TDA7432_LR, lr);
+		tda7432_write(sd, TDA7432_RF, rf);
+		tda7432_write(sd, TDA7432_RR, rr);
+		return 0;
+	case V4L2_CID_AUDIO_VOLUME:
+		volume = 0x6f - ctrl->val;
+		if (loudness)		/* Turn on the loudness bit */
+			volume |= TDA7432_LD_ON;
+
+		tda7432_write(sd, TDA7432_VL, volume);
+		return 0;
+	case V4L2_CID_AUDIO_BASS:
+		bass = t->bass->val;
+		treble = t->treble->val;
+		if (bass >= 0x8)
+			bass = 14 - (bass - 8);
+		if (treble >= 0x8)
+			treble = 14 - (treble - 8);
+
+		tda7432_write(sd, TDA7432_TN, 0x10 | (bass << 4) | treble);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct v4l2_ctrl_ops tda7432_ctrl_ops = {
+	.s_ctrl = tda7432_s_ctrl,
+};
+
+static const struct v4l2_subdev_core_ops tda7432_core_ops = {
+	.log_status = tda7432_log_status,
+};
+
+static const struct v4l2_subdev_ops tda7432_ops = {
+	.core = &tda7432_core_ops,
+};
+
+/* ----------------------------------------------------------------------- */
+
+/* *********************** *
+ * i2c interface functions *
+ * *********************** */
+
+static int tda7432_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct tda7432 *t;
+	struct v4l2_subdev *sd;
+
+	v4l_info(client, "chip found @ 0x%02x (%s)\n",
+			client->addr << 1, client->adapter->name);
+
+	t = devm_kzalloc(&client->dev, sizeof(*t), GFP_KERNEL);
+	if (!t)
+		return -ENOMEM;
+	sd = &t->sd;
+	v4l2_i2c_subdev_init(sd, client, &tda7432_ops);
+	v4l2_ctrl_handler_init(&t->hdl, 5);
+	v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
+		V4L2_CID_AUDIO_VOLUME, 0, maxvol ? 0x68 : 0x4f, 1, maxvol ? 0x5d : 0x47);
+	t->mute = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
+		V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+	t->balance = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
+		V4L2_CID_AUDIO_BALANCE, -31, 31, 1, 0);
+	t->bass = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
+		V4L2_CID_AUDIO_BASS, 0, 14, 1, 7);
+	t->treble = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
+		V4L2_CID_AUDIO_TREBLE, 0, 14, 1, 7);
+	sd->ctrl_handler = &t->hdl;
+	if (t->hdl.error) {
+		int err = t->hdl.error;
+
+		v4l2_ctrl_handler_free(&t->hdl);
+		return err;
+	}
+	v4l2_ctrl_cluster(2, &t->bass);
+	v4l2_ctrl_cluster(2, &t->mute);
+	v4l2_ctrl_handler_setup(&t->hdl);
+	if (loudness < 0 || loudness > 15) {
+		v4l2_warn(sd, "loudness parameter must be between 0 and 15\n");
+		if (loudness < 0)
+			loudness = 0;
+		if (loudness > 15)
+			loudness = 15;
+	}
+
+	tda7432_set(sd);
+	return 0;
+}
+
+static int tda7432_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct tda7432 *t = to_state(sd);
+
+	tda7432_set(sd);
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&t->hdl);
+	return 0;
+}
+
+static const struct i2c_device_id tda7432_id[] = {
+	{ "tda7432", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tda7432_id);
+
+static struct i2c_driver tda7432_driver = {
+	.driver = {
+		.name	= "tda7432",
+	},
+	.probe		= tda7432_probe,
+	.remove		= tda7432_remove,
+	.id_table	= tda7432_id,
+};
+
+module_i2c_driver(tda7432_driver);