Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

49 files changed, 14723 insertions, 0 deletions

diff --git a/drivers/media/pci/cx18/Kconfig b/drivers/media/pci/cx18/Kconfig
new file mode 100644
index 000000000..c675b83c4
--- /dev/null
+++ b/drivers/media/pci/cx18/Kconfig
@@ -0,0 +1,35 @@
+config VIDEO_CX18
+	tristate "Conexant cx23418 MPEG encoder support"
+	depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C
+	select I2C_ALGOBIT
+	select VIDEOBUF_VMALLOC
+	depends on RC_CORE
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	select VIDEO_CX2341X
+	select VIDEO_CS5345
+	select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
+	---help---
+	  This is a video4linux driver for Conexant cx23418 based
+	  PCI combo video recorder devices.
+
+	  This is used in devices such as the Hauppauge HVR-1600
+	  cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx18.
+
+config VIDEO_CX18_ALSA
+	tristate "Conexant 23418 DMA audio support"
+	depends on VIDEO_CX18 && SND
+	select SND_PCM
+	---help---
+	  This is a video4linux driver for direct (DMA) audio on
+	  Conexant 23418 based TV cards using ALSA.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx18-alsa.
diff --git a/drivers/media/pci/cx18/Makefile b/drivers/media/pci/cx18/Makefile
new file mode 100644
index 000000000..9c82c2df0
--- /dev/null
+++ b/drivers/media/pci/cx18/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+cx18-objs    := cx18-driver.o cx18-cards.o cx18-i2c.o cx18-firmware.o cx18-gpio.o \
+	cx18-queue.o cx18-streams.o cx18-fileops.o cx18-ioctl.o cx18-controls.o \
+	cx18-mailbox.o cx18-vbi.o cx18-audio.o cx18-video.o cx18-irq.o \
+	cx18-av-core.o cx18-av-audio.o cx18-av-firmware.o cx18-av-vbi.o cx18-scb.o \
+	cx18-dvb.o cx18-io.o
+cx18-alsa-objs := cx18-alsa-main.o cx18-alsa-pcm.o
+
+obj-$(CONFIG_VIDEO_CX18) += cx18.o
+obj-$(CONFIG_VIDEO_CX18_ALSA) += cx18-alsa.o
+
+ccflags-y += -Idrivers/media/dvb-frontends
+ccflags-y += -Idrivers/media/tuners
diff --git a/drivers/media/pci/cx18/cx18-alsa-main.c b/drivers/media/pci/cx18/cx18-alsa-main.c
new file mode 100644
index 000000000..93443d145
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-alsa-main.c
@@ -0,0 +1,290 @@
+/*
+ *  ALSA interface to cx18 PCM capture streams
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *  Copyright (C) 2009  Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ *  Portions of this work were sponsored by ONELAN Limited.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+
+#include <media/v4l2-device.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+
+#include "cx18-driver.h"
+#include "cx18-version.h"
+#include "cx18-alsa.h"
+#include "cx18-alsa-pcm.h"
+
+int cx18_alsa_debug;
+
+#define CX18_DEBUG_ALSA_INFO(fmt, arg...) \
+	do { \
+		if (cx18_alsa_debug & 2) \
+			printk(KERN_INFO "%s: " fmt, "cx18-alsa", ## arg); \
+	} while (0);
+
+module_param_named(debug, cx18_alsa_debug, int, 0644);
+MODULE_PARM_DESC(debug,
+		 "Debug level (bitmask). Default: 0\n"
+		 "\t\t\t  1/0x0001: warning\n"
+		 "\t\t\t  2/0x0002: info\n");
+
+MODULE_AUTHOR("Andy Walls");
+MODULE_DESCRIPTION("CX23418 ALSA Interface");
+MODULE_SUPPORTED_DEVICE("CX23418 MPEG2 encoder");
+MODULE_LICENSE("GPL");
+
+MODULE_VERSION(CX18_VERSION);
+
+static inline
+struct snd_cx18_card *to_snd_cx18_card(struct v4l2_device *v4l2_dev)
+{
+	return to_cx18(v4l2_dev)->alsa;
+}
+
+static inline
+struct snd_cx18_card *p_to_snd_cx18_card(struct v4l2_device **v4l2_dev)
+{
+	return container_of(v4l2_dev, struct snd_cx18_card, v4l2_dev);
+}
+
+static void snd_cx18_card_free(struct snd_cx18_card *cxsc)
+{
+	if (cxsc == NULL)
+		return;
+
+	if (cxsc->v4l2_dev != NULL)
+		to_cx18(cxsc->v4l2_dev)->alsa = NULL;
+
+	/* FIXME - take any other stopping actions needed */
+
+	kfree(cxsc);
+}
+
+static void snd_cx18_card_private_free(struct snd_card *sc)
+{
+	if (sc == NULL)
+		return;
+	snd_cx18_card_free(sc->private_data);
+	sc->private_data = NULL;
+	sc->private_free = NULL;
+}
+
+static int snd_cx18_card_create(struct v4l2_device *v4l2_dev,
+				       struct snd_card *sc,
+				       struct snd_cx18_card **cxsc)
+{
+	*cxsc = kzalloc(sizeof(struct snd_cx18_card), GFP_KERNEL);
+	if (*cxsc == NULL)
+		return -ENOMEM;
+
+	(*cxsc)->v4l2_dev = v4l2_dev;
+	(*cxsc)->sc = sc;
+
+	sc->private_data = *cxsc;
+	sc->private_free = snd_cx18_card_private_free;
+
+	return 0;
+}
+
+static int snd_cx18_card_set_names(struct snd_cx18_card *cxsc)
+{
+	struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
+	struct snd_card *sc = cxsc->sc;
+
+	/* sc->driver is used by alsa-lib's configurator: simple, unique */
+	strlcpy(sc->driver, "CX23418", sizeof(sc->driver));
+
+	/* sc->shortname is a symlink in /proc/asound: CX18-M -> cardN */
+	snprintf(sc->shortname,  sizeof(sc->shortname), "CX18-%d",
+		 cx->instance);
+
+	/* sc->longname is read from /proc/asound/cards */
+	snprintf(sc->longname, sizeof(sc->longname),
+		 "CX23418 #%d %s TV/FM Radio/Line-In Capture",
+		 cx->instance, cx->card_name);
+
+	return 0;
+}
+
+static int snd_cx18_init(struct v4l2_device *v4l2_dev)
+{
+	struct cx18 *cx = to_cx18(v4l2_dev);
+	struct snd_card *sc = NULL;
+	struct snd_cx18_card *cxsc;
+	int ret;
+
+	/* Numbrs steps from "Writing an ALSA Driver" by Takashi Iwai */
+
+	/* (1) Check and increment the device index */
+	/* This is a no-op for us.  We'll use the cx->instance */
+
+	/* (2) Create a card instance */
+	ret = snd_card_new(&cx->pci_dev->dev,
+			   SNDRV_DEFAULT_IDX1, /* use first available id */
+			   SNDRV_DEFAULT_STR1, /* xid from end of shortname*/
+			   THIS_MODULE, 0, &sc);
+	if (ret) {
+		CX18_ALSA_ERR("%s: snd_card_new() failed with err %d\n",
+			      __func__, ret);
+		goto err_exit;
+	}
+
+	/* (3) Create a main component */
+	ret = snd_cx18_card_create(v4l2_dev, sc, &cxsc);
+	if (ret) {
+		CX18_ALSA_ERR("%s: snd_cx18_card_create() failed with err %d\n",
+			      __func__, ret);
+		goto err_exit_free;
+	}
+
+	/* (4) Set the driver ID and name strings */
+	snd_cx18_card_set_names(cxsc);
+
+
+	ret = snd_cx18_pcm_create(cxsc);
+	if (ret) {
+		CX18_ALSA_ERR("%s: snd_cx18_pcm_create() failed with err %d\n",
+			      __func__, ret);
+		goto err_exit_free;
+	}
+	/* FIXME - proc files */
+
+	/* (7) Set the driver data and return 0 */
+	/* We do this out of normal order for PCI drivers to avoid races */
+	cx->alsa = cxsc;
+
+	/* (6) Register the card instance */
+	ret = snd_card_register(sc);
+	if (ret) {
+		cx->alsa = NULL;
+		CX18_ALSA_ERR("%s: snd_card_register() failed with err %d\n",
+			      __func__, ret);
+		goto err_exit_free;
+	}
+
+	return 0;
+
+err_exit_free:
+	if (sc != NULL)
+		snd_card_free(sc);
+	kfree(cxsc);
+err_exit:
+	return ret;
+}
+
+static int cx18_alsa_load(struct cx18 *cx)
+{
+	struct v4l2_device *v4l2_dev = &cx->v4l2_dev;
+	struct cx18_stream *s;
+
+	if (v4l2_dev == NULL) {
+		printk(KERN_ERR "cx18-alsa: %s: struct v4l2_device * is NULL\n",
+		       __func__);
+		return 0;
+	}
+
+	cx = to_cx18(v4l2_dev);
+	if (cx == NULL) {
+		printk(KERN_ERR "cx18-alsa cx is NULL\n");
+		return 0;
+	}
+
+	s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM];
+	if (s->video_dev.v4l2_dev == NULL) {
+		CX18_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - skipping\n",
+				     __func__);
+		return 0;
+	}
+
+	if (cx->alsa != NULL) {
+		CX18_ALSA_ERR("%s: struct snd_cx18_card * already exists\n",
+			      __func__);
+		return 0;
+	}
+
+	if (snd_cx18_init(v4l2_dev)) {
+		CX18_ALSA_ERR("%s: failed to create struct snd_cx18_card\n",
+			      __func__);
+	} else {
+		CX18_DEBUG_ALSA_INFO("%s: created cx18 ALSA interface instance\n",
+				     __func__);
+	}
+	return 0;
+}
+
+static int __init cx18_alsa_init(void)
+{
+	printk(KERN_INFO "cx18-alsa: module loading...\n");
+	cx18_ext_init = &cx18_alsa_load;
+	return 0;
+}
+
+static void __exit snd_cx18_exit(struct snd_cx18_card *cxsc)
+{
+	struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
+
+	/* FIXME - pointer checks & shutdown cxsc */
+
+	snd_card_free(cxsc->sc);
+	cx->alsa = NULL;
+}
+
+static int __exit cx18_alsa_exit_callback(struct device *dev, void *data)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
+	struct snd_cx18_card *cxsc;
+
+	if (v4l2_dev == NULL) {
+		printk(KERN_ERR "cx18-alsa: %s: struct v4l2_device * is NULL\n",
+		       __func__);
+		return 0;
+	}
+
+	cxsc = to_snd_cx18_card(v4l2_dev);
+	if (cxsc == NULL) {
+		CX18_ALSA_WARN("%s: struct snd_cx18_card * is NULL\n",
+			       __func__);
+		return 0;
+	}
+
+	snd_cx18_exit(cxsc);
+	return 0;
+}
+
+static void __exit cx18_alsa_exit(void)
+{
+	struct device_driver *drv;
+	int ret;
+
+	printk(KERN_INFO "cx18-alsa: module unloading...\n");
+
+	drv = driver_find("cx18", &pci_bus_type);
+	ret = driver_for_each_device(drv, NULL, NULL, cx18_alsa_exit_callback);
+	(void)ret;	/* suppress compiler warning */
+
+	cx18_ext_init = NULL;
+	printk(KERN_INFO "cx18-alsa: module unload complete\n");
+}
+
+module_init(cx18_alsa_init);
+module_exit(cx18_alsa_exit);
diff --git a/drivers/media/pci/cx18/cx18-alsa-pcm.c b/drivers/media/pci/cx18/cx18-alsa-pcm.c
new file mode 100644
index 000000000..4f31042a4
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-alsa-pcm.c
@@ -0,0 +1,354 @@
+/*
+ *  ALSA PCM device for the
+ *  ALSA interface to cx18 PCM capture streams
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *  Copyright (C) 2009  Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ *  Portions of this work were sponsored by ONELAN Limited.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+
+#include <media/v4l2-device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "cx18-driver.h"
+#include "cx18-queue.h"
+#include "cx18-streams.h"
+#include "cx18-fileops.h"
+#include "cx18-alsa.h"
+#include "cx18-alsa-pcm.h"
+
+static unsigned int pcm_debug;
+module_param(pcm_debug, int, 0644);
+MODULE_PARM_DESC(pcm_debug, "enable debug messages for pcm");
+
+#define dprintk(fmt, arg...) do {					\
+	    if (pcm_debug)						\
+		printk(KERN_INFO "cx18-alsa-pcm %s: " fmt,		\
+				  __func__, ##arg);			\
+	} while (0)
+
+static const struct snd_pcm_hardware snd_cx18_hw_capture = {
+	.info = SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP           |
+		SNDRV_PCM_INFO_INTERLEAVED    |
+		SNDRV_PCM_INFO_MMAP_VALID,
+
+	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+
+	.rates = SNDRV_PCM_RATE_48000,
+
+	.rate_min = 48000,
+	.rate_max = 48000,
+	.channels_min = 2,
+	.channels_max = 2,
+	.buffer_bytes_max = 62720 * 8,	/* just about the value in usbaudio.c */
+	.period_bytes_min = 64,		/* 12544/2, */
+	.period_bytes_max = 12544,
+	.periods_min = 2,
+	.periods_max = 98,		/* 12544, */
+};
+
+void cx18_alsa_announce_pcm_data(struct snd_cx18_card *cxsc, u8 *pcm_data,
+				 size_t num_bytes)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_pcm_runtime *runtime;
+	unsigned int oldptr;
+	unsigned int stride;
+	int period_elapsed = 0;
+	int length;
+
+	dprintk("cx18 alsa announce ptr=%p data=%p num_bytes=%zu\n", cxsc,
+		pcm_data, num_bytes);
+
+	substream = cxsc->capture_pcm_substream;
+	if (substream == NULL) {
+		dprintk("substream was NULL\n");
+		return;
+	}
+
+	runtime = substream->runtime;
+	if (runtime == NULL) {
+		dprintk("runtime was NULL\n");
+		return;
+	}
+
+	stride = runtime->frame_bits >> 3;
+	if (stride == 0) {
+		dprintk("stride is zero\n");
+		return;
+	}
+
+	length = num_bytes / stride;
+	if (length == 0) {
+		dprintk("%s: length was zero\n", __func__);
+		return;
+	}
+
+	if (runtime->dma_area == NULL) {
+		dprintk("dma area was NULL - ignoring\n");
+		return;
+	}
+
+	oldptr = cxsc->hwptr_done_capture;
+	if (oldptr + length >= runtime->buffer_size) {
+		unsigned int cnt =
+			runtime->buffer_size - oldptr;
+		memcpy(runtime->dma_area + oldptr * stride, pcm_data,
+		       cnt * stride);
+		memcpy(runtime->dma_area, pcm_data + cnt * stride,
+		       length * stride - cnt * stride);
+	} else {
+		memcpy(runtime->dma_area + oldptr * stride, pcm_data,
+		       length * stride);
+	}
+	snd_pcm_stream_lock(substream);
+
+	cxsc->hwptr_done_capture += length;
+	if (cxsc->hwptr_done_capture >=
+	    runtime->buffer_size)
+		cxsc->hwptr_done_capture -=
+			runtime->buffer_size;
+
+	cxsc->capture_transfer_done += length;
+	if (cxsc->capture_transfer_done >=
+	    runtime->period_size) {
+		cxsc->capture_transfer_done -=
+			runtime->period_size;
+		period_elapsed = 1;
+	}
+
+	snd_pcm_stream_unlock(substream);
+
+	if (period_elapsed)
+		snd_pcm_period_elapsed(substream);
+}
+
+static int snd_cx18_pcm_capture_open(struct snd_pcm_substream *substream)
+{
+	struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct v4l2_device *v4l2_dev = cxsc->v4l2_dev;
+	struct cx18 *cx = to_cx18(v4l2_dev);
+	struct cx18_stream *s;
+	struct cx18_open_id item;
+	int ret;
+
+	/* Instruct the cx18 to start sending packets */
+	snd_cx18_lock(cxsc);
+	s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM];
+
+	item.cx = cx;
+	item.type = s->type;
+	item.open_id = cx->open_id++;
+
+	/* See if the stream is available */
+	if (cx18_claim_stream(&item, item.type)) {
+		/* No, it's already in use */
+		snd_cx18_unlock(cxsc);
+		return -EBUSY;
+	}
+
+	if (test_bit(CX18_F_S_STREAMOFF, &s->s_flags) ||
+	    test_and_set_bit(CX18_F_S_STREAMING, &s->s_flags)) {
+		/* We're already streaming.  No additional action required */
+		snd_cx18_unlock(cxsc);
+		return 0;
+	}
+
+
+	runtime->hw = snd_cx18_hw_capture;
+	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+	cxsc->capture_pcm_substream = substream;
+	runtime->private_data = cx;
+
+	cx->pcm_announce_callback = cx18_alsa_announce_pcm_data;
+
+	/* Not currently streaming, so start it up */
+	set_bit(CX18_F_S_STREAMING, &s->s_flags);
+	ret = cx18_start_v4l2_encode_stream(s);
+	snd_cx18_unlock(cxsc);
+
+	return ret;
+}
+
+static int snd_cx18_pcm_capture_close(struct snd_pcm_substream *substream)
+{
+	struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+	struct v4l2_device *v4l2_dev = cxsc->v4l2_dev;
+	struct cx18 *cx = to_cx18(v4l2_dev);
+	struct cx18_stream *s;
+
+	/* Instruct the cx18 to stop sending packets */
+	snd_cx18_lock(cxsc);
+	s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM];
+	cx18_stop_v4l2_encode_stream(s, 0);
+	clear_bit(CX18_F_S_STREAMING, &s->s_flags);
+
+	cx18_release_stream(s);
+
+	cx->pcm_announce_callback = NULL;
+	snd_cx18_unlock(cxsc);
+
+	return 0;
+}
+
+static int snd_cx18_pcm_ioctl(struct snd_pcm_substream *substream,
+		     unsigned int cmd, void *arg)
+{
+	struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+	int ret;
+
+	snd_cx18_lock(cxsc);
+	ret = snd_pcm_lib_ioctl(substream, cmd, arg);
+	snd_cx18_unlock(cxsc);
+	return ret;
+}
+
+
+static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs,
+					size_t size)
+{
+	struct snd_pcm_runtime *runtime = subs->runtime;
+
+	dprintk("Allocating vbuffer\n");
+	if (runtime->dma_area) {
+		if (runtime->dma_bytes > size)
+			return 0;
+
+		vfree(runtime->dma_area);
+	}
+	runtime->dma_area = vmalloc(size);
+	if (!runtime->dma_area)
+		return -ENOMEM;
+
+	runtime->dma_bytes = size;
+
+	return 0;
+}
+
+static int snd_cx18_pcm_hw_params(struct snd_pcm_substream *substream,
+			 struct snd_pcm_hw_params *params)
+{
+	dprintk("%s called\n", __func__);
+
+	return snd_pcm_alloc_vmalloc_buffer(substream,
+					   params_buffer_bytes(params));
+}
+
+static int snd_cx18_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+	unsigned long flags;
+	unsigned char *dma_area = NULL;
+
+	spin_lock_irqsave(&cxsc->slock, flags);
+	if (substream->runtime->dma_area) {
+		dprintk("freeing pcm capture region\n");
+		dma_area = substream->runtime->dma_area;
+		substream->runtime->dma_area = NULL;
+	}
+	spin_unlock_irqrestore(&cxsc->slock, flags);
+	vfree(dma_area);
+
+	return 0;
+}
+
+static int snd_cx18_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+
+	cxsc->hwptr_done_capture = 0;
+	cxsc->capture_transfer_done = 0;
+
+	return 0;
+}
+
+static int snd_cx18_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	return 0;
+}
+
+static
+snd_pcm_uframes_t snd_cx18_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	unsigned long flags;
+	snd_pcm_uframes_t hwptr_done;
+	struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+
+	spin_lock_irqsave(&cxsc->slock, flags);
+	hwptr_done = cxsc->hwptr_done_capture;
+	spin_unlock_irqrestore(&cxsc->slock, flags);
+
+	return hwptr_done;
+}
+
+static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
+					     unsigned long offset)
+{
+	void *pageptr = subs->runtime->dma_area + offset;
+
+	return vmalloc_to_page(pageptr);
+}
+
+static const struct snd_pcm_ops snd_cx18_pcm_capture_ops = {
+	.open		= snd_cx18_pcm_capture_open,
+	.close		= snd_cx18_pcm_capture_close,
+	.ioctl		= snd_cx18_pcm_ioctl,
+	.hw_params	= snd_cx18_pcm_hw_params,
+	.hw_free	= snd_cx18_pcm_hw_free,
+	.prepare	= snd_cx18_pcm_prepare,
+	.trigger	= snd_cx18_pcm_trigger,
+	.pointer	= snd_cx18_pcm_pointer,
+	.page		= snd_pcm_get_vmalloc_page,
+};
+
+int snd_cx18_pcm_create(struct snd_cx18_card *cxsc)
+{
+	struct snd_pcm *sp;
+	struct snd_card *sc = cxsc->sc;
+	struct v4l2_device *v4l2_dev = cxsc->v4l2_dev;
+	struct cx18 *cx = to_cx18(v4l2_dev);
+	int ret;
+
+	ret = snd_pcm_new(sc, "CX23418 PCM",
+			  0, /* PCM device 0, the only one for this card */
+			  0, /* 0 playback substreams */
+			  1, /* 1 capture substream */
+			  &sp);
+	if (ret) {
+		CX18_ALSA_ERR("%s: snd_cx18_pcm_create() failed with err %d\n",
+			      __func__, ret);
+		goto err_exit;
+	}
+
+	spin_lock_init(&cxsc->slock);
+
+	snd_pcm_set_ops(sp, SNDRV_PCM_STREAM_CAPTURE,
+			&snd_cx18_pcm_capture_ops);
+	sp->info_flags = 0;
+	sp->private_data = cxsc;
+	strlcpy(sp->name, cx->card_name, sizeof(sp->name));
+
+	return 0;
+
+err_exit:
+	return ret;
+}
diff --git a/drivers/media/pci/cx18/cx18-alsa-pcm.h b/drivers/media/pci/cx18/cx18-alsa-pcm.h
new file mode 100644
index 000000000..b9e3afe14
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-alsa-pcm.h
@@ -0,0 +1,22 @@
+/*
+ *  ALSA PCM device for the
+ *  ALSA interface to cx18 PCM capture streams
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+int snd_cx18_pcm_create(struct snd_cx18_card *cxsc);
+
+/* Used by cx18-mailbox to announce the PCM data to the module */
+void cx18_alsa_announce_pcm_data(struct snd_cx18_card *card, u8 *pcm_data,
+				 size_t num_bytes);
diff --git a/drivers/media/pci/cx18/cx18-alsa.h b/drivers/media/pci/cx18/cx18-alsa.h
new file mode 100644
index 000000000..d88e3bd79
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-alsa.h
@@ -0,0 +1,69 @@
+/*
+ *  ALSA interface to cx18 PCM capture streams
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+struct snd_card;
+
+struct snd_cx18_card {
+	struct v4l2_device *v4l2_dev;
+	struct snd_card *sc;
+	unsigned int capture_transfer_done;
+	unsigned int hwptr_done_capture;
+	struct snd_pcm_substream *capture_pcm_substream;
+	spinlock_t slock;
+};
+
+extern int cx18_alsa_debug;
+
+/*
+ * File operations that manipulate the encoder or video or audio subdevices
+ * need to be serialized.  Use the same lock we use for v4l2 file ops.
+ */
+static inline void snd_cx18_lock(struct snd_cx18_card *cxsc)
+{
+	struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
+	mutex_lock(&cx->serialize_lock);
+}
+
+static inline void snd_cx18_unlock(struct snd_cx18_card *cxsc)
+{
+	struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
+	mutex_unlock(&cx->serialize_lock);
+}
+
+#define CX18_ALSA_DBGFLG_WARN  (1 << 0)
+#define CX18_ALSA_DBGFLG_INFO  (1 << 1)
+
+#define CX18_ALSA_DEBUG(x, type, fmt, args...) \
+	do { \
+		if ((x) & cx18_alsa_debug) \
+			printk(KERN_INFO "%s-alsa: " type ": " fmt, \
+				v4l2_dev->name , ## args); \
+	} while (0)
+
+#define CX18_ALSA_DEBUG_WARN(fmt, args...) \
+	CX18_ALSA_DEBUG(CX18_ALSA_DBGFLG_WARN, "warning", fmt , ## args)
+
+#define CX18_ALSA_DEBUG_INFO(fmt, args...) \
+	CX18_ALSA_DEBUG(CX18_ALSA_DBGFLG_INFO, "info", fmt , ## args)
+
+#define CX18_ALSA_ERR(fmt, args...) \
+	printk(KERN_ERR "%s-alsa: " fmt, v4l2_dev->name , ## args)
+
+#define CX18_ALSA_WARN(fmt, args...) \
+	printk(KERN_WARNING "%s-alsa: " fmt, v4l2_dev->name , ## args)
+
+#define CX18_ALSA_INFO(fmt, args...) \
+	printk(KERN_INFO "%s-alsa: " fmt, v4l2_dev->name , ## args)
diff --git a/drivers/media/pci/cx18/cx18-audio.c b/drivers/media/pci/cx18/cx18-audio.c
new file mode 100644
index 000000000..61fc485d3
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-audio.c
@@ -0,0 +1,87 @@
+/*
+ *  cx18 audio-related functions
+ *
+ *  Derived from ivtv-audio.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-cards.h"
+#include "cx18-audio.h"
+
+#define CX18_AUDIO_ENABLE    0xc72014
+#define CX18_AI1_MUX_MASK    0x30
+#define CX18_AI1_MUX_I2S1    0x00
+#define CX18_AI1_MUX_I2S2    0x10
+#define CX18_AI1_MUX_843_I2S 0x20
+
+/* Selects the audio input and output according to the current
+   settings. */
+int cx18_audio_set_io(struct cx18 *cx)
+{
+	const struct cx18_card_audio_input *in;
+	u32 u, v;
+	int err;
+
+	/* Determine which input to use */
+	if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags))
+		in = &cx->card->radio_input;
+	else
+		in = &cx->card->audio_inputs[cx->audio_input];
+
+	/* handle muxer chips */
+	v4l2_subdev_call(cx->sd_extmux, audio, s_routing,
+			 (u32) in->muxer_input, 0, 0);
+
+	err = cx18_call_hw_err(cx, cx->card->hw_audio_ctrl,
+			       audio, s_routing, in->audio_input, 0, 0);
+	if (err)
+		return err;
+
+	/* FIXME - this internal mux should be abstracted to a subdev */
+	u = cx18_read_reg(cx, CX18_AUDIO_ENABLE);
+	v = u & ~CX18_AI1_MUX_MASK;
+	switch (in->audio_input) {
+	case CX18_AV_AUDIO_SERIAL1:
+		v |= CX18_AI1_MUX_I2S1;
+		break;
+	case CX18_AV_AUDIO_SERIAL2:
+		v |= CX18_AI1_MUX_I2S2;
+		break;
+	default:
+		v |= CX18_AI1_MUX_843_I2S;
+		break;
+	}
+	if (v == u) {
+		/* force a toggle of some AI1 MUX control bits */
+		u &= ~CX18_AI1_MUX_MASK;
+		switch (in->audio_input) {
+		case CX18_AV_AUDIO_SERIAL1:
+			u |= CX18_AI1_MUX_843_I2S;
+			break;
+		case CX18_AV_AUDIO_SERIAL2:
+			u |= CX18_AI1_MUX_843_I2S;
+			break;
+		default:
+			u |= CX18_AI1_MUX_I2S1;
+			break;
+		}
+		cx18_write_reg_expect(cx, u | 0xb00, CX18_AUDIO_ENABLE,
+				      u, CX18_AI1_MUX_MASK);
+	}
+	cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
+			      v, CX18_AI1_MUX_MASK);
+	return 0;
+}
diff --git a/drivers/media/pci/cx18/cx18-audio.h b/drivers/media/pci/cx18/cx18-audio.h
new file mode 100644
index 000000000..f65d71a04
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-audio.h
@@ -0,0 +1,19 @@
+/*
+ *  cx18 audio-related functions
+ *
+ *  Derived from ivtv-audio.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+int cx18_audio_set_io(struct cx18 *cx);
diff --git a/drivers/media/pci/cx18/cx18-av-audio.c b/drivers/media/pci/cx18/cx18-av-audio.c
new file mode 100644
index 000000000..3abc54cbe
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-av-audio.c
@@ -0,0 +1,466 @@
+/*
+ *  cx18 ADEC audio functions
+ *
+ *  Derived from cx25840-audio.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+
+static int set_audclk_freq(struct cx18 *cx, u32 freq)
+{
+	struct cx18_av_state *state = &cx->av_state;
+
+	if (freq != 32000 && freq != 44100 && freq != 48000)
+		return -EINVAL;
+
+	/*
+	 * The PLL parameters are based on the external crystal frequency that
+	 * would ideally be:
+	 *
+	 * NTSC Color subcarrier freq * 8 =
+	 *	4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
+	 *
+	 * The accidents of history and rationale that explain from where this
+	 * combination of magic numbers originate can be found in:
+	 *
+	 * [1] Abrahams, I. C., "Choice of Chrominance Subcarrier Frequency in
+	 * the NTSC Standards", Proceedings of the I-R-E, January 1954, pp 79-80
+	 *
+	 * [2] Abrahams, I. C., "The 'Frequency Interleaving' Principle in the
+	 * NTSC Standards", Proceedings of the I-R-E, January 1954, pp 81-83
+	 *
+	 * As Mike Bradley has rightly pointed out, it's not the exact crystal
+	 * frequency that matters, only that all parts of the driver and
+	 * firmware are using the same value (close to the ideal value).
+	 *
+	 * Since I have a strong suspicion that, if the firmware ever assumes a
+	 * crystal value at all, it will assume 28.636360 MHz, the crystal
+	 * freq used in calculations in this driver will be:
+	 *
+	 *	xtal_freq = 28.636360 MHz
+	 *
+	 * an error of less than 0.13 ppm which is way, way better than any off
+	 * the shelf crystal will have for accuracy anyway.
+	 *
+	 * Below I aim to run the PLLs' VCOs near 400 MHz to minimze error.
+	 *
+	 * Many thanks to Jeff Campbell and Mike Bradley for their extensive
+	 * investigation, experimentation, testing, and suggested solutions of
+	 * of audio/video sync problems with SVideo and CVBS captures.
+	 */
+
+	if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
+		switch (freq) {
+		case 32000:
+			/*
+			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+			 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20
+			 */
+			cx18_av_write4(cx, 0x108, 0x200d040f);
+
+			/* VID_PLL Fraction = 0x2be2fe */
+			/* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+			cx18_av_write4(cx, 0x10c, 0x002be2fe);
+
+			/* AUX_PLL Fraction = 0x176740c */
+			/* xtal * 0xd.bb3a060/0x20 = 32000 * 384: 393 MHz p-pd*/
+			cx18_av_write4(cx, 0x110, 0x0176740c);
+
+			/* src3/4/6_ctl */
+			/* 0x1.f77f = (4 * xtal/8*2/455) / 32000 */
+			cx18_av_write4(cx, 0x900, 0x0801f77f);
+			cx18_av_write4(cx, 0x904, 0x0801f77f);
+			cx18_av_write4(cx, 0x90c, 0x0801f77f);
+
+			/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */
+			cx18_av_write(cx, 0x127, 0x60);
+
+			/* AUD_COUNT = 0x2fff = 8 samples * 4 * 384 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x11202fff);
+
+			/*
+			 * EN_AV_LOCK = 0
+			 * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 =
+			 *  ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa00d2ef8);
+			break;
+
+		case 44100:
+			/*
+			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+			 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x18
+			 */
+			cx18_av_write4(cx, 0x108, 0x180e040f);
+
+			/* VID_PLL Fraction = 0x2be2fe */
+			/* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+			cx18_av_write4(cx, 0x10c, 0x002be2fe);
+
+			/* AUX_PLL Fraction = 0x062a1f2 */
+			/* xtal * 0xe.3150f90/0x18 = 44100 * 384: 406 MHz p-pd*/
+			cx18_av_write4(cx, 0x110, 0x0062a1f2);
+
+			/* src3/4/6_ctl */
+			/* 0x1.6d59 = (4 * xtal/8*2/455) / 44100 */
+			cx18_av_write4(cx, 0x900, 0x08016d59);
+			cx18_av_write4(cx, 0x904, 0x08016d59);
+			cx18_av_write4(cx, 0x90c, 0x08016d59);
+
+			/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x18 */
+			cx18_av_write(cx, 0x127, 0x58);
+
+			/* AUD_COUNT = 0x92ff = 49 samples * 2 * 384 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x112092ff);
+
+			/*
+			 * EN_AV_LOCK = 0
+			 * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 =
+			 *  ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa01d4bf8);
+			break;
+
+		case 48000:
+			/*
+			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+			 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x16
+			 */
+			cx18_av_write4(cx, 0x108, 0x160e040f);
+
+			/* VID_PLL Fraction = 0x2be2fe */
+			/* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+			cx18_av_write4(cx, 0x10c, 0x002be2fe);
+
+			/* AUX_PLL Fraction = 0x05227ad */
+			/* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz p-pd*/
+			cx18_av_write4(cx, 0x110, 0x005227ad);
+
+			/* src3/4/6_ctl */
+			/* 0x1.4faa = (4 * xtal/8*2/455) / 48000 */
+			cx18_av_write4(cx, 0x900, 0x08014faa);
+			cx18_av_write4(cx, 0x904, 0x08014faa);
+			cx18_av_write4(cx, 0x90c, 0x08014faa);
+
+			/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
+			cx18_av_write(cx, 0x127, 0x56);
+
+			/* AUD_COUNT = 0x5fff = 4 samples * 16 * 384 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x11205fff);
+
+			/*
+			 * EN_AV_LOCK = 0
+			 * VID_COUNT = 0x1193f8 = 143999.000 * 8 =
+			 *  ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa01193f8);
+			break;
+		}
+	} else {
+		switch (freq) {
+		case 32000:
+			/*
+			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+			 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x30
+			 */
+			cx18_av_write4(cx, 0x108, 0x300d040f);
+
+			/* VID_PLL Fraction = 0x2be2fe */
+			/* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+			cx18_av_write4(cx, 0x10c, 0x002be2fe);
+
+			/* AUX_PLL Fraction = 0x176740c */
+			/* xtal * 0xd.bb3a060/0x30 = 32000 * 256: 393 MHz p-pd*/
+			cx18_av_write4(cx, 0x110, 0x0176740c);
+
+			/* src1_ctl */
+			/* 0x1.0000 = 32000/32000 */
+			cx18_av_write4(cx, 0x8f8, 0x08010000);
+
+			/* src3/4/6_ctl */
+			/* 0x2.0000 = 2 * (32000/32000) */
+			cx18_av_write4(cx, 0x900, 0x08020000);
+			cx18_av_write4(cx, 0x904, 0x08020000);
+			cx18_av_write4(cx, 0x90c, 0x08020000);
+
+			/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x30 */
+			cx18_av_write(cx, 0x127, 0x70);
+
+			/* AUD_COUNT = 0x1fff = 8 samples * 4 * 256 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x11201fff);
+
+			/*
+			 * EN_AV_LOCK = 0
+			 * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 =
+			 *  ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa00d2ef8);
+			break;
+
+		case 44100:
+			/*
+			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+			 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x24
+			 */
+			cx18_av_write4(cx, 0x108, 0x240e040f);
+
+			/* VID_PLL Fraction = 0x2be2fe */
+			/* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+			cx18_av_write4(cx, 0x10c, 0x002be2fe);
+
+			/* AUX_PLL Fraction = 0x062a1f2 */
+			/* xtal * 0xe.3150f90/0x24 = 44100 * 256: 406 MHz p-pd*/
+			cx18_av_write4(cx, 0x110, 0x0062a1f2);
+
+			/* src1_ctl */
+			/* 0x1.60cd = 44100/32000 */
+			cx18_av_write4(cx, 0x8f8, 0x080160cd);
+
+			/* src3/4/6_ctl */
+			/* 0x1.7385 = 2 * (32000/44100) */
+			cx18_av_write4(cx, 0x900, 0x08017385);
+			cx18_av_write4(cx, 0x904, 0x08017385);
+			cx18_av_write4(cx, 0x90c, 0x08017385);
+
+			/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x24 */
+			cx18_av_write(cx, 0x127, 0x64);
+
+			/* AUD_COUNT = 0x61ff = 49 samples * 2 * 256 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x112061ff);
+
+			/*
+			 * EN_AV_LOCK = 0
+			 * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 =
+			 *  ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa01d4bf8);
+			break;
+
+		case 48000:
+			/*
+			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+			 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20
+			 */
+			cx18_av_write4(cx, 0x108, 0x200d040f);
+
+			/* VID_PLL Fraction = 0x2be2fe */
+			/* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+			cx18_av_write4(cx, 0x10c, 0x002be2fe);
+
+			/* AUX_PLL Fraction = 0x176740c */
+			/* xtal * 0xd.bb3a060/0x20 = 48000 * 256: 393 MHz p-pd*/
+			cx18_av_write4(cx, 0x110, 0x0176740c);
+
+			/* src1_ctl */
+			/* 0x1.8000 = 48000/32000 */
+			cx18_av_write4(cx, 0x8f8, 0x08018000);
+
+			/* src3/4/6_ctl */
+			/* 0x1.5555 = 2 * (32000/48000) */
+			cx18_av_write4(cx, 0x900, 0x08015555);
+			cx18_av_write4(cx, 0x904, 0x08015555);
+			cx18_av_write4(cx, 0x90c, 0x08015555);
+
+			/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */
+			cx18_av_write(cx, 0x127, 0x60);
+
+			/* AUD_COUNT = 0x3fff = 4 samples * 16 * 256 - 1 */
+			cx18_av_write4(cx, 0x12c, 0x11203fff);
+
+			/*
+			 * EN_AV_LOCK = 0
+			 * VID_COUNT = 0x1193f8 = 143999.000 * 8 =
+			 *  ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8
+			 */
+			cx18_av_write4(cx, 0x128, 0xa01193f8);
+			break;
+		}
+	}
+
+	state->audclk_freq = freq;
+
+	return 0;
+}
+
+void cx18_av_audio_set_path(struct cx18 *cx)
+{
+	struct cx18_av_state *state = &cx->av_state;
+	u8 v;
+
+	/* stop microcontroller */
+	v = cx18_av_read(cx, 0x803) & ~0x10;
+	cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
+
+	/* assert soft reset */
+	v = cx18_av_read(cx, 0x810) | 0x01;
+	cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
+
+	/* Mute everything to prevent the PFFT! */
+	cx18_av_write(cx, 0x8d3, 0x1f);
+
+	if (state->aud_input <= CX18_AV_AUDIO_SERIAL2) {
+		/* Set Path1 to Serial Audio Input */
+		cx18_av_write4(cx, 0x8d0, 0x01011012);
+
+		/* The microcontroller should not be started for the
+		 * non-tuner inputs: autodetection is specific for
+		 * TV audio. */
+	} else {
+		/* Set Path1 to Analog Demod Main Channel */
+		cx18_av_write4(cx, 0x8d0, 0x1f063870);
+	}
+
+	set_audclk_freq(cx, state->audclk_freq);
+
+	/* deassert soft reset */
+	v = cx18_av_read(cx, 0x810) & ~0x01;
+	cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
+
+	if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
+		/* When the microcontroller detects the
+		 * audio format, it will unmute the lines */
+		v = cx18_av_read(cx, 0x803) | 0x10;
+		cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
+	}
+}
+
+static void set_volume(struct cx18 *cx, int volume)
+{
+	/* First convert the volume to msp3400 values (0-127) */
+	int vol = volume >> 9;
+	/* now scale it up to cx18_av values
+	 * -114dB to -96dB maps to 0
+	 * this should be 19, but in my testing that was 4dB too loud */
+	if (vol <= 23)
+		vol = 0;
+	else
+		vol -= 23;
+
+	/* PATH1_VOLUME */
+	cx18_av_write(cx, 0x8d4, 228 - (vol * 2));
+}
+
+static void set_bass(struct cx18 *cx, int bass)
+{
+	/* PATH1_EQ_BASS_VOL */
+	cx18_av_and_or(cx, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff));
+}
+
+static void set_treble(struct cx18 *cx, int treble)
+{
+	/* PATH1_EQ_TREBLE_VOL */
+	cx18_av_and_or(cx, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff));
+}
+
+static void set_balance(struct cx18 *cx, int balance)
+{
+	int bal = balance >> 8;
+	if (bal > 0x80) {
+		/* PATH1_BAL_LEFT */
+		cx18_av_and_or(cx, 0x8d5, 0x7f, 0x80);
+		/* PATH1_BAL_LEVEL */
+		cx18_av_and_or(cx, 0x8d5, ~0x7f, bal & 0x7f);
+	} else {
+		/* PATH1_BAL_LEFT */
+		cx18_av_and_or(cx, 0x8d5, 0x7f, 0x00);
+		/* PATH1_BAL_LEVEL */
+		cx18_av_and_or(cx, 0x8d5, ~0x7f, 0x80 - bal);
+	}
+}
+
+static void set_mute(struct cx18 *cx, int mute)
+{
+	struct cx18_av_state *state = &cx->av_state;
+	u8 v;
+
+	if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
+		/* Must turn off microcontroller in order to mute sound.
+		 * Not sure if this is the best method, but it does work.
+		 * If the microcontroller is running, then it will undo any
+		 * changes to the mute register. */
+		v = cx18_av_read(cx, 0x803);
+		if (mute) {
+			/* disable microcontroller */
+			v &= ~0x10;
+			cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
+			cx18_av_write(cx, 0x8d3, 0x1f);
+		} else {
+			/* enable microcontroller */
+			v |= 0x10;
+			cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
+		}
+	} else {
+		/* SRC1_MUTE_EN */
+		cx18_av_and_or(cx, 0x8d3, ~0x2, mute ? 0x02 : 0x00);
+	}
+}
+
+int cx18_av_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	struct cx18_av_state *state = &cx->av_state;
+	int retval;
+	u8 v;
+
+	if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
+		v = cx18_av_read(cx, 0x803) & ~0x10;
+		cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
+		cx18_av_write(cx, 0x8d3, 0x1f);
+	}
+	v = cx18_av_read(cx, 0x810) | 0x1;
+	cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
+
+	retval = set_audclk_freq(cx, freq);
+
+	v = cx18_av_read(cx, 0x810) & ~0x1;
+	cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
+	if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
+		v = cx18_av_read(cx, 0x803) | 0x10;
+		cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
+	}
+	return retval;
+}
+
+static int cx18_av_audio_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct v4l2_subdev *sd = to_sd(ctrl);
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_VOLUME:
+		set_volume(cx, ctrl->val);
+		break;
+	case V4L2_CID_AUDIO_BASS:
+		set_bass(cx, ctrl->val);
+		break;
+	case V4L2_CID_AUDIO_TREBLE:
+		set_treble(cx, ctrl->val);
+		break;
+	case V4L2_CID_AUDIO_BALANCE:
+		set_balance(cx, ctrl->val);
+		break;
+	case V4L2_CID_AUDIO_MUTE:
+		set_mute(cx, ctrl->val);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+const struct v4l2_ctrl_ops cx18_av_audio_ctrl_ops = {
+	.s_ctrl = cx18_av_audio_s_ctrl,
+};
diff --git a/drivers/media/pci/cx18/cx18-av-core.c b/drivers/media/pci/cx18/cx18-av-core.c
new file mode 100644
index 000000000..eda343322
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-av-core.c
@@ -0,0 +1,1367 @@
+/*
+ *  cx18 ADEC audio functions
+ *
+ *  Derived from cx25840-core.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-cards.h"
+
+int cx18_av_write(struct cx18 *cx, u16 addr, u8 value)
+{
+	u32 reg = 0xc40000 + (addr & ~3);
+	u32 mask = 0xff;
+	int shift = (addr & 3) * 8;
+	u32 x = cx18_read_reg(cx, reg);
+
+	x = (x & ~(mask << shift)) | ((u32)value << shift);
+	cx18_write_reg(cx, x, reg);
+	return 0;
+}
+
+int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask)
+{
+	u32 reg = 0xc40000 + (addr & ~3);
+	int shift = (addr & 3) * 8;
+	u32 x = cx18_read_reg(cx, reg);
+
+	x = (x & ~((u32)0xff << shift)) | ((u32)value << shift);
+	cx18_write_reg_expect(cx, x, reg,
+				((u32)eval << shift), ((u32)mask << shift));
+	return 0;
+}
+
+int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value)
+{
+	cx18_write_reg(cx, value, 0xc40000 + addr);
+	return 0;
+}
+
+int
+cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval, u32 mask)
+{
+	cx18_write_reg_expect(cx, value, 0xc40000 + addr, eval, mask);
+	return 0;
+}
+
+int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value)
+{
+	cx18_write_reg_noretry(cx, value, 0xc40000 + addr);
+	return 0;
+}
+
+u8 cx18_av_read(struct cx18 *cx, u16 addr)
+{
+	u32 x = cx18_read_reg(cx, 0xc40000 + (addr & ~3));
+	int shift = (addr & 3) * 8;
+
+	return (x >> shift) & 0xff;
+}
+
+u32 cx18_av_read4(struct cx18 *cx, u16 addr)
+{
+	return cx18_read_reg(cx, 0xc40000 + addr);
+}
+
+int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned and_mask,
+		   u8 or_value)
+{
+	return cx18_av_write(cx, addr,
+			     (cx18_av_read(cx, addr) & and_mask) |
+			     or_value);
+}
+
+int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 and_mask,
+		   u32 or_value)
+{
+	return cx18_av_write4(cx, addr,
+			     (cx18_av_read4(cx, addr) & and_mask) |
+			     or_value);
+}
+
+static void cx18_av_init(struct cx18 *cx)
+{
+	/*
+	 * The crystal freq used in calculations in this driver will be
+	 * 28.636360 MHz.
+	 * Aim to run the PLLs' VCOs near 400 MHz to minimze errors.
+	 */
+
+	/*
+	 * VDCLK  Integer = 0x0f, Post Divider = 0x04
+	 * AIMCLK Integer = 0x0e, Post Divider = 0x16
+	 */
+	cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f);
+
+	/* VDCLK Fraction = 0x2be2fe */
+	/* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */
+	cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe);
+
+	/* AIMCLK Fraction = 0x05227ad */
+	/* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/
+	cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad);
+
+	/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
+	cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56);
+}
+
+static void cx18_av_initialize(struct v4l2_subdev *sd)
+{
+	struct cx18_av_state *state = to_cx18_av_state(sd);
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	int default_volume;
+	u32 v;
+
+	cx18_av_loadfw(cx);
+	/* Stop 8051 code execution */
+	cx18_av_write4_expect(cx, CXADEC_DL_CTL, 0x03000000,
+						 0x03000000, 0x13000000);
+
+	/* initallize the PLL by toggling sleep bit */
+	v = cx18_av_read4(cx, CXADEC_HOST_REG1);
+	/* enable sleep mode - register appears to be read only... */
+	cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v | 1, v, 0xfffe);
+	/* disable sleep mode */
+	cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v & 0xfffe,
+						    v & 0xfffe, 0xffff);
+
+	/* initialize DLLs */
+	v = cx18_av_read4(cx, CXADEC_DLL1_DIAG_CTRL) & 0xE1FFFEFF;
+	/* disable FLD */
+	cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v);
+	/* enable FLD */
+	cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v | 0x10000100);
+
+	v = cx18_av_read4(cx, CXADEC_DLL2_DIAG_CTRL) & 0xE1FFFEFF;
+	/* disable FLD */
+	cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v);
+	/* enable FLD */
+	cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v | 0x06000100);
+
+	/* set analog bias currents. Set Vreg to 1.20V. */
+	cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL1, 0x000A1802);
+
+	v = cx18_av_read4(cx, CXADEC_AFE_DIAG_CTRL3) | 1;
+	/* enable TUNE_FIL_RST */
+	cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3, v, v, 0x03009F0F);
+	/* disable TUNE_FIL_RST */
+	cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3,
+			      v & 0xFFFFFFFE, v & 0xFFFFFFFE, 0x03009F0F);
+
+	/* enable 656 output */
+	cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x040C00);
+
+	/* video output drive strength */
+	cx18_av_and_or4(cx, CXADEC_PIN_CTRL2, ~0, 0x2);
+
+	/* reset video */
+	cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0x8000);
+	cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0);
+
+	/*
+	 * Disable Video Auto-config of the Analog Front End and Video PLL.
+	 *
+	 * Since we only use BT.656 pixel mode, which works for both 525 and 625
+	 * line systems, it's just easier for us to set registers
+	 * 0x102 (CXADEC_CHIP_CTRL), 0x104-0x106 (CXADEC_AFE_CTRL),
+	 * 0x108-0x109 (CXADEC_PLL_CTRL1), and 0x10c-0x10f (CXADEC_VID_PLL_FRAC)
+	 * ourselves, than to run around cleaning up after the auto-config.
+	 *
+	 * (Note: my CX23418 chip doesn't seem to let the ACFG_DIS bit
+	 * get set to 1, but OTOH, it doesn't seem to do AFE and VID PLL
+	 * autoconfig either.)
+	 *
+	 * As a default, also turn off Dual mode for ADC2 and set ADC2 to CH3.
+	 */
+	cx18_av_and_or4(cx, CXADEC_CHIP_CTRL, 0xFFFBFFFF, 0x00120000);
+
+	/* Setup the Video and and Aux/Audio PLLs */
+	cx18_av_init(cx);
+
+	/* set video to auto-detect */
+	/* Clear bits 11-12 to enable slow locking mode.  Set autodetect mode */
+	/* set the comb notch = 1 */
+	cx18_av_and_or4(cx, CXADEC_MODE_CTRL, 0xFFF7E7F0, 0x02040800);
+
+	/* Enable wtw_en in CRUSH_CTRL (Set bit 22) */
+	/* Enable maj_sel in CRUSH_CTRL (Set bit 20) */
+	cx18_av_and_or4(cx, CXADEC_CRUSH_CTRL, ~0, 0x00500000);
+
+	/* Set VGA_TRACK_RANGE to 0x20 */
+	cx18_av_and_or4(cx, CXADEC_DFE_CTRL2, 0xFFFF00FF, 0x00002000);
+
+	/*
+	 * Initial VBI setup
+	 * VIP-1.1, 10 bit mode, enable Raw, disable sliced,
+	 * don't clamp raw samples when codes are in use, 1 byte user D-words,
+	 * IDID0 has line #, RP code V bit transition on VBLANK, data during
+	 * blanking intervals
+	 */
+	cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4013252e);
+
+	/* Set the video input.
+	   The setting in MODE_CTRL gets lost when we do the above setup */
+	/* EncSetSignalStd(dwDevNum, pEnc->dwSigStd); */
+	/* EncSetVideoInput(dwDevNum, pEnc->VidIndSelection); */
+
+	/*
+	 * Analog Front End (AFE)
+	 * Default to luma on ch1/ADC1, chroma on ch2/ADC2, SIF on ch3/ADC2
+	 *  bypass_ch[1-3]     use filter
+	 *  droop_comp_ch[1-3] disable
+	 *  clamp_en_ch[1-3]   disable
+	 *  aud_in_sel         ADC2
+	 *  luma_in_sel        ADC1
+	 *  chroma_in_sel      ADC2
+	 *  clamp_sel_ch[2-3]  midcode
+	 *  clamp_sel_ch1      video decoder
+	 *  vga_sel_ch3        audio decoder
+	 *  vga_sel_ch[1-2]    video decoder
+	 *  half_bw_ch[1-3]    disable
+	 *  +12db_ch[1-3]      disable
+	 */
+	cx18_av_and_or4(cx, CXADEC_AFE_CTRL, 0xFF000000, 0x00005D00);
+
+/*	if(dwEnable && dw3DCombAvailable) { */
+/*		CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x7728021F); */
+/*    } else { */
+/*		CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x6628021F); */
+/*    } */
+	cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, 0x6628021F);
+	default_volume = cx18_av_read(cx, 0x8d4);
+	/*
+	 * Enforce the legacy volume scale mapping limits to avoid
+	 * -ERANGE errors when initializing the volume control
+	 */
+	if (default_volume > 228) {
+		/* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */
+		default_volume = 228;
+		cx18_av_write(cx, 0x8d4, 228);
+	} else if (default_volume < 20) {
+		/* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */
+		default_volume = 20;
+		cx18_av_write(cx, 0x8d4, 20);
+	}
+	default_volume = (((228 - default_volume) >> 1) + 23) << 9;
+	state->volume->cur.val = state->volume->default_value = default_volume;
+	v4l2_ctrl_handler_setup(&state->hdl);
+}
+
+static int cx18_av_reset(struct v4l2_subdev *sd, u32 val)
+{
+	cx18_av_initialize(sd);
+	return 0;
+}
+
+static int cx18_av_load_fw(struct v4l2_subdev *sd)
+{
+	struct cx18_av_state *state = to_cx18_av_state(sd);
+
+	if (!state->is_initialized) {
+		/* initialize on first use */
+		state->is_initialized = 1;
+		cx18_av_initialize(sd);
+	}
+	return 0;
+}
+
+void cx18_av_std_setup(struct cx18 *cx)
+{
+	struct cx18_av_state *state = &cx->av_state;
+	struct v4l2_subdev *sd = &state->sd;
+	v4l2_std_id std = state->std;
+
+	/*
+	 * Video ADC crystal clock to pixel clock SRC decimation ratio
+	 * 28.636360 MHz/13.5 Mpps * 256 = 0x21f.07b
+	 */
+	const int src_decimation = 0x21f;
+
+	int hblank, hactive, burst, vblank, vactive, sc;
+	int vblank656;
+	int luma_lpf, uv_lpf, comb;
+	u32 pll_int, pll_frac, pll_post;
+
+	/* datasheet startup, step 8d */
+	if (std & ~V4L2_STD_NTSC)
+		cx18_av_write(cx, 0x49f, 0x11);
+	else
+		cx18_av_write(cx, 0x49f, 0x14);
+
+	/*
+	 * Note: At the end of a field, there are 3 sets of half line duration
+	 * (double horizontal rate) pulses:
+	 *
+	 * 5 (625) or 6 (525) half-lines to blank for the vertical retrace
+	 * 5 (625) or 6 (525) vertical sync pulses of half line duration
+	 * 5 (625) or 6 (525) half-lines of equalization pulses
+	 */
+	if (std & V4L2_STD_625_50) {
+		/*
+		 * The following relationships of half line counts should hold:
+		 * 625 = vblank656 + vactive
+		 * 10 = vblank656 - vblank = vsync pulses + equalization pulses
+		 *
+		 * vblank656: half lines after line 625/mid-313 of blanked video
+		 * vblank:    half lines, after line 5/317, of blanked video
+		 * vactive:   half lines of active video +
+		 *		5 half lines after the end of active video
+		 *
+		 * As far as I can tell:
+		 * vblank656 starts counting from the falling edge of the first
+		 *	vsync pulse (start of line 1 or mid-313)
+		 * vblank starts counting from the after the 5 vsync pulses and
+		 *	5 or 4 equalization pulses (start of line 6 or 318)
+		 *
+		 * For 625 line systems the driver will extract VBI information
+		 * from lines 6-23 and lines 318-335 (but the slicer can only
+		 * handle 17 lines, not the 18 in the vblank region).
+		 * In addition, we need vblank656 and vblank to be one whole
+		 * line longer, to cover line 24 and 336, so the SAV/EAV RP
+		 * codes get generated such that the encoder can actually
+		 * extract line 23 & 335 (WSS).  We'll lose 1 line in each field
+		 * at the top of the screen.
+		 *
+		 * It appears the 5 half lines that happen after active
+		 * video must be included in vactive (579 instead of 574),
+		 * otherwise the colors get badly displayed in various regions
+		 * of the screen.  I guess the chroma comb filter gets confused
+		 * without them (at least when a PVR-350 is the PAL source).
+		 */
+		vblank656 = 48; /* lines  1 -  24  &  313 - 336 */
+		vblank = 38;    /* lines  6 -  24  &  318 - 336 */
+		vactive = 579;  /* lines 24 - 313  &  337 - 626 */
+
+		/*
+		 * For a 13.5 Mpps clock and 15,625 Hz line rate, a line is
+		 * is 864 pixels = 720 active + 144 blanking.  ITU-R BT.601
+		 * specifies 12 luma clock periods or ~ 0.9 * 13.5 Mpps after
+		 * the end of active video to start a horizontal line, so that
+		 * leaves 132 pixels of hblank to ignore.
+		 */
+		hblank = 132;
+		hactive = 720;
+
+		/*
+		 * Burst gate delay (for 625 line systems)
+		 * Hsync leading edge to color burst rise = 5.6 us
+		 * Color burst width = 2.25 us
+		 * Gate width = 4 pixel clocks
+		 * (5.6 us + 2.25/2 us) * 13.5 Mpps + 4/2 clocks = 92.79 clocks
+		 */
+		burst = 93;
+		luma_lpf = 2;
+		if (std & V4L2_STD_PAL) {
+			uv_lpf = 1;
+			comb = 0x20;
+			/* sc = 4433618.75 * src_decimation/28636360 * 2^13 */
+			sc = 688700;
+		} else if (std == V4L2_STD_PAL_Nc) {
+			uv_lpf = 1;
+			comb = 0x20;
+			/* sc = 3582056.25 * src_decimation/28636360 * 2^13 */
+			sc = 556422;
+		} else { /* SECAM */
+			uv_lpf = 0;
+			comb = 0;
+			/* (fr + fb)/2 = (4406260 + 4250000)/2 = 4328130 */
+			/* sc = 4328130 * src_decimation/28636360 * 2^13 */
+			sc = 672314;
+		}
+	} else {
+		/*
+		 * The following relationships of half line counts should hold:
+		 * 525 = prevsync + vblank656 + vactive
+		 * 12 = vblank656 - vblank = vsync pulses + equalization pulses
+		 *
+		 * prevsync:  6 half-lines before the vsync pulses
+		 * vblank656: half lines, after line 3/mid-266, of blanked video
+		 * vblank:    half lines, after line 9/272, of blanked video
+		 * vactive:   half lines of active video
+		 *
+		 * As far as I can tell:
+		 * vblank656 starts counting from the falling edge of the first
+		 *	vsync pulse (start of line 4 or mid-266)
+		 * vblank starts counting from the after the 6 vsync pulses and
+		 *	6 or 5 equalization pulses (start of line 10 or 272)
+		 *
+		 * For 525 line systems the driver will extract VBI information
+		 * from lines 10-21 and lines 273-284.
+		 */
+		vblank656 = 38; /* lines  4 -  22  &  266 - 284 */
+		vblank = 26;	/* lines 10 -  22  &  272 - 284 */
+		vactive = 481;  /* lines 23 - 263  &  285 - 525 */
+
+		/*
+		 * For a 13.5 Mpps clock and 15,734.26 Hz line rate, a line is
+		 * is 858 pixels = 720 active + 138 blanking.  The Hsync leading
+		 * edge should happen 1.2 us * 13.5 Mpps ~= 16 pixels after the
+		 * end of active video, leaving 122 pixels of hblank to ignore
+		 * before active video starts.
+		 */
+		hactive = 720;
+		hblank = 122;
+		luma_lpf = 1;
+		uv_lpf = 1;
+
+		/*
+		 * Burst gate delay (for 525 line systems)
+		 * Hsync leading edge to color burst rise = 5.3 us
+		 * Color burst width = 2.5 us
+		 * Gate width = 4 pixel clocks
+		 * (5.3 us + 2.5/2 us) * 13.5 Mpps + 4/2 clocks = 90.425 clocks
+		 */
+		if (std == V4L2_STD_PAL_60) {
+			burst = 90;
+			luma_lpf = 2;
+			comb = 0x20;
+			/* sc = 4433618.75 * src_decimation/28636360 * 2^13 */
+			sc = 688700;
+		} else if (std == V4L2_STD_PAL_M) {
+			/* The 97 needs to be verified against PAL-M timings */
+			burst = 97;
+			comb = 0x20;
+			/* sc = 3575611.49 * src_decimation/28636360 * 2^13 */
+			sc = 555421;
+		} else {
+			burst = 90;
+			comb = 0x66;
+			/* sc = 3579545.45.. * src_decimation/28636360 * 2^13 */
+			sc = 556032;
+		}
+	}
+
+	/* DEBUG: Displays configured PLL frequency */
+	pll_int = cx18_av_read(cx, 0x108);
+	pll_frac = cx18_av_read4(cx, 0x10c) & 0x1ffffff;
+	pll_post = cx18_av_read(cx, 0x109);
+	CX18_DEBUG_INFO_DEV(sd, "PLL regs = int: %u, frac: %u, post: %u\n",
+			    pll_int, pll_frac, pll_post);
+
+	if (pll_post) {
+		int fsc, pll;
+		u64 tmp;
+
+		pll = (28636360L * ((((u64)pll_int) << 25) + pll_frac)) >> 25;
+		pll /= pll_post;
+		CX18_DEBUG_INFO_DEV(sd, "Video PLL = %d.%06d MHz\n",
+				    pll / 1000000, pll % 1000000);
+		CX18_DEBUG_INFO_DEV(sd, "Pixel rate = %d.%06d Mpixel/sec\n",
+				    pll / 8000000, (pll / 8) % 1000000);
+
+		CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio = %d.%03d\n",
+				    src_decimation / 256,
+				    ((src_decimation % 256) * 1000) / 256);
+
+		tmp = 28636360 * (u64) sc;
+		do_div(tmp, src_decimation);
+		fsc = tmp >> 13;
+		CX18_DEBUG_INFO_DEV(sd,
+				    "Chroma sub-carrier initial freq = %d.%06d MHz\n",
+				    fsc / 1000000, fsc % 1000000);
+
+		CX18_DEBUG_INFO_DEV(sd,
+				    "hblank %i, hactive %i, vblank %i, vactive %i, vblank656 %i, src_dec %i, burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, sc 0x%06x\n",
+				    hblank, hactive, vblank, vactive, vblank656,
+				    src_decimation, burst, luma_lpf, uv_lpf,
+				    comb, sc);
+	}
+
+	/* Sets horizontal blanking delay and active lines */
+	cx18_av_write(cx, 0x470, hblank);
+	cx18_av_write(cx, 0x471,
+		      (((hblank >> 8) & 0x3) | (hactive << 4)) & 0xff);
+	cx18_av_write(cx, 0x472, hactive >> 4);
+
+	/* Sets burst gate delay */
+	cx18_av_write(cx, 0x473, burst);
+
+	/* Sets vertical blanking delay and active duration */
+	cx18_av_write(cx, 0x474, vblank);
+	cx18_av_write(cx, 0x475,
+		      (((vblank >> 8) & 0x3) | (vactive << 4)) & 0xff);
+	cx18_av_write(cx, 0x476, vactive >> 4);
+	cx18_av_write(cx, 0x477, vblank656);
+
+	/* Sets src decimation rate */
+	cx18_av_write(cx, 0x478, src_decimation & 0xff);
+	cx18_av_write(cx, 0x479, (src_decimation >> 8) & 0xff);
+
+	/* Sets Luma and UV Low pass filters */
+	cx18_av_write(cx, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30));
+
+	/* Enables comb filters */
+	cx18_av_write(cx, 0x47b, comb);
+
+	/* Sets SC Step*/
+	cx18_av_write(cx, 0x47c, sc);
+	cx18_av_write(cx, 0x47d, (sc >> 8) & 0xff);
+	cx18_av_write(cx, 0x47e, (sc >> 16) & 0xff);
+
+	if (std & V4L2_STD_625_50) {
+		state->slicer_line_delay = 1;
+		state->slicer_line_offset = (6 + state->slicer_line_delay - 2);
+	} else {
+		state->slicer_line_delay = 0;
+		state->slicer_line_offset = (10 + state->slicer_line_delay - 2);
+	}
+	cx18_av_write(cx, 0x47f, state->slicer_line_delay);
+}
+
+static void input_change(struct cx18 *cx)
+{
+	struct cx18_av_state *state = &cx->av_state;
+	v4l2_std_id std = state->std;
+	u8 v;
+
+	/* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */
+	cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11);
+	cx18_av_and_or(cx, 0x401, ~0x60, 0);
+	cx18_av_and_or(cx, 0x401, ~0x60, 0x60);
+
+	if (std & V4L2_STD_525_60) {
+		if (std == V4L2_STD_NTSC_M_JP) {
+			/* Japan uses EIAJ audio standard */
+			cx18_av_write_expect(cx, 0x808, 0xf7, 0xf7, 0xff);
+			cx18_av_write_expect(cx, 0x80b, 0x02, 0x02, 0x3f);
+		} else if (std == V4L2_STD_NTSC_M_KR) {
+			/* South Korea uses A2 audio standard */
+			cx18_av_write_expect(cx, 0x808, 0xf8, 0xf8, 0xff);
+			cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
+		} else {
+			/* Others use the BTSC audio standard */
+			cx18_av_write_expect(cx, 0x808, 0xf6, 0xf6, 0xff);
+			cx18_av_write_expect(cx, 0x80b, 0x01, 0x01, 0x3f);
+		}
+	} else if (std & V4L2_STD_PAL) {
+		/* Follow tuner change procedure for PAL */
+		cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff);
+		cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
+	} else if (std & V4L2_STD_SECAM) {
+		/* Select autodetect for SECAM */
+		cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff);
+		cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
+	}
+
+	v = cx18_av_read(cx, 0x803);
+	if (v & 0x10) {
+		/* restart audio decoder microcontroller */
+		v &= ~0x10;
+		cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
+		v |= 0x10;
+		cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
+	}
+}
+
+static int cx18_av_s_frequency(struct v4l2_subdev *sd,
+			       const struct v4l2_frequency *freq)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	input_change(cx);
+	return 0;
+}
+
+static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
+					enum cx18_av_audio_input aud_input)
+{
+	struct cx18_av_state *state = &cx->av_state;
+	struct v4l2_subdev *sd = &state->sd;
+
+	enum analog_signal_type {
+		NONE, CVBS, Y, C, SIF, Pb, Pr
+	} ch[3] = {NONE, NONE, NONE};
+
+	u8 afe_mux_cfg;
+	u8 adc2_cfg;
+	u8 input_mode;
+	u32 afe_cfg;
+	int i;
+
+	CX18_DEBUG_INFO_DEV(sd, "decoder set video input %d, audio input %d\n",
+			    vid_input, aud_input);
+
+	if (vid_input >= CX18_AV_COMPOSITE1 &&
+	    vid_input <= CX18_AV_COMPOSITE8) {
+		afe_mux_cfg = 0xf0 + (vid_input - CX18_AV_COMPOSITE1);
+		ch[0] = CVBS;
+		input_mode = 0x0;
+	} else if (vid_input >= CX18_AV_COMPONENT_LUMA1) {
+		int luma = vid_input & 0xf000;
+		int r_chroma = vid_input & 0xf0000;
+		int b_chroma = vid_input & 0xf00000;
+
+		if ((vid_input & ~0xfff000) ||
+		    luma < CX18_AV_COMPONENT_LUMA1 ||
+		    luma > CX18_AV_COMPONENT_LUMA8 ||
+		    r_chroma < CX18_AV_COMPONENT_R_CHROMA4 ||
+		    r_chroma > CX18_AV_COMPONENT_R_CHROMA6 ||
+		    b_chroma < CX18_AV_COMPONENT_B_CHROMA7 ||
+		    b_chroma > CX18_AV_COMPONENT_B_CHROMA8) {
+			CX18_ERR_DEV(sd, "0x%06x is not a valid video input!\n",
+				     vid_input);
+			return -EINVAL;
+		}
+		afe_mux_cfg = (luma - CX18_AV_COMPONENT_LUMA1) >> 12;
+		ch[0] = Y;
+		afe_mux_cfg |= (r_chroma - CX18_AV_COMPONENT_R_CHROMA4) >> 12;
+		ch[1] = Pr;
+		afe_mux_cfg |= (b_chroma - CX18_AV_COMPONENT_B_CHROMA7) >> 14;
+		ch[2] = Pb;
+		input_mode = 0x6;
+	} else {
+		int luma = vid_input & 0xf0;
+		int chroma = vid_input & 0xf00;
+
+		if ((vid_input & ~0xff0) ||
+		    luma < CX18_AV_SVIDEO_LUMA1 ||
+		    luma > CX18_AV_SVIDEO_LUMA8 ||
+		    chroma < CX18_AV_SVIDEO_CHROMA4 ||
+		    chroma > CX18_AV_SVIDEO_CHROMA8) {
+			CX18_ERR_DEV(sd, "0x%06x is not a valid video input!\n",
+				     vid_input);
+			return -EINVAL;
+		}
+		afe_mux_cfg = 0xf0 + ((luma - CX18_AV_SVIDEO_LUMA1) >> 4);
+		ch[0] = Y;
+		if (chroma >= CX18_AV_SVIDEO_CHROMA7) {
+			afe_mux_cfg &= 0x3f;
+			afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA7) >> 2;
+			ch[2] = C;
+		} else {
+			afe_mux_cfg &= 0xcf;
+			afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA4) >> 4;
+			ch[1] = C;
+		}
+		input_mode = 0x2;
+	}
+
+	switch (aud_input) {
+	case CX18_AV_AUDIO_SERIAL1:
+	case CX18_AV_AUDIO_SERIAL2:
+		/* do nothing, use serial audio input */
+		break;
+	case CX18_AV_AUDIO4:
+		afe_mux_cfg &= ~0x30;
+		ch[1] = SIF;
+		break;
+	case CX18_AV_AUDIO5:
+		afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x10;
+		ch[1] = SIF;
+		break;
+	case CX18_AV_AUDIO6:
+		afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x20;
+		ch[1] = SIF;
+		break;
+	case CX18_AV_AUDIO7:
+		afe_mux_cfg &= ~0xc0;
+		ch[2] = SIF;
+		break;
+	case CX18_AV_AUDIO8:
+		afe_mux_cfg = (afe_mux_cfg & ~0xc0) | 0x40;
+		ch[2] = SIF;
+		break;
+
+	default:
+		CX18_ERR_DEV(sd, "0x%04x is not a valid audio input!\n",
+			     aud_input);
+		return -EINVAL;
+	}
+
+	/* Set up analog front end multiplexers */
+	cx18_av_write_expect(cx, 0x103, afe_mux_cfg, afe_mux_cfg, 0xf7);
+	/* Set INPUT_MODE to Composite, S-Video, or Component */
+	cx18_av_and_or(cx, 0x401, ~0x6, input_mode);
+
+	/* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
+	adc2_cfg = cx18_av_read(cx, 0x102);
+	if (ch[2] == NONE)
+		adc2_cfg &= ~0x2; /* No sig on CH3, set ADC2 to CH2 for input */
+	else
+		adc2_cfg |= 0x2;  /* Signal on CH3, set ADC2 to CH3 for input */
+
+	/* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */
+	if (ch[1] != NONE && ch[2] != NONE)
+		adc2_cfg |= 0x4; /* Set dual mode */
+	else
+		adc2_cfg &= ~0x4; /* Clear dual mode */
+	cx18_av_write_expect(cx, 0x102, adc2_cfg, adc2_cfg, 0x17);
+
+	/* Configure the analog front end */
+	afe_cfg = cx18_av_read4(cx, CXADEC_AFE_CTRL);
+	afe_cfg &= 0xff000000;
+	afe_cfg |= 0x00005000; /* CHROMA_IN, AUD_IN: ADC2; LUMA_IN: ADC1 */
+	if (ch[1] != NONE && ch[2] != NONE)
+		afe_cfg |= 0x00000030; /* half_bw_ch[2-3] since in dual mode */
+
+	for (i = 0; i < 3; i++) {
+		switch (ch[i]) {
+		default:
+		case NONE:
+			/* CLAMP_SEL = Fixed to midcode clamp level */
+			afe_cfg |= (0x00000200 << i);
+			break;
+		case CVBS:
+		case Y:
+			if (i > 0)
+				afe_cfg |= 0x00002000; /* LUMA_IN_SEL: ADC2 */
+			break;
+		case C:
+		case Pb:
+		case Pr:
+			/* CLAMP_SEL = Fixed to midcode clamp level */
+			afe_cfg |= (0x00000200 << i);
+			if (i == 0 && ch[i] == C)
+				afe_cfg &= ~0x00001000; /* CHROMA_IN_SEL ADC1 */
+			break;
+		case SIF:
+			/*
+			 * VGA_GAIN_SEL = Audio Decoder
+			 * CLAMP_SEL = Fixed to midcode clamp level
+			 */
+			afe_cfg |= (0x00000240 << i);
+			if (i == 0)
+				afe_cfg &= ~0x00004000; /* AUD_IN_SEL ADC1 */
+			break;
+		}
+	}
+
+	cx18_av_write4(cx, CXADEC_AFE_CTRL, afe_cfg);
+
+	state->vid_input = vid_input;
+	state->aud_input = aud_input;
+	cx18_av_audio_set_path(cx);
+	input_change(cx);
+	return 0;
+}
+
+static int cx18_av_s_video_routing(struct v4l2_subdev *sd,
+				   u32 input, u32 output, u32 config)
+{
+	struct cx18_av_state *state = to_cx18_av_state(sd);
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	return set_input(cx, input, state->aud_input);
+}
+
+static int cx18_av_s_audio_routing(struct v4l2_subdev *sd,
+				   u32 input, u32 output, u32 config)
+{
+	struct cx18_av_state *state = to_cx18_av_state(sd);
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	return set_input(cx, state->vid_input, input);
+}
+
+static int cx18_av_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
+{
+	struct cx18_av_state *state = to_cx18_av_state(sd);
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	u8 vpres;
+	u8 mode;
+	int val = 0;
+
+	if (state->radio)
+		return 0;
+
+	vpres = cx18_av_read(cx, 0x40e) & 0x20;
+	vt->signal = vpres ? 0xffff : 0x0;
+
+	vt->capability |=
+		    V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
+		    V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
+
+	mode = cx18_av_read(cx, 0x804);
+
+	/* get rxsubchans and audmode */
+	if ((mode & 0xf) == 1)
+		val |= V4L2_TUNER_SUB_STEREO;
+	else
+		val |= V4L2_TUNER_SUB_MONO;
+
+	if (mode == 2 || mode == 4)
+		val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
+
+	if (mode & 0x10)
+		val |= V4L2_TUNER_SUB_SAP;
+
+	vt->rxsubchans = val;
+	vt->audmode = state->audmode;
+	return 0;
+}
+
+static int cx18_av_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt)
+{
+	struct cx18_av_state *state = to_cx18_av_state(sd);
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	u8 v;
+
+	if (state->radio)
+		return 0;
+
+	v = cx18_av_read(cx, 0x809);
+	v &= ~0xf;
+
+	switch (vt->audmode) {
+	case V4L2_TUNER_MODE_MONO:
+		/* mono      -> mono
+		   stereo    -> mono
+		   bilingual -> lang1 */
+		break;
+	case V4L2_TUNER_MODE_STEREO:
+	case V4L2_TUNER_MODE_LANG1:
+		/* mono      -> mono
+		   stereo    -> stereo
+		   bilingual -> lang1 */
+		v |= 0x4;
+		break;
+	case V4L2_TUNER_MODE_LANG1_LANG2:
+		/* mono      -> mono
+		   stereo    -> stereo
+		   bilingual -> lang1/lang2 */
+		v |= 0x7;
+		break;
+	case V4L2_TUNER_MODE_LANG2:
+		/* mono      -> mono
+		   stereo    -> stereo
+		   bilingual -> lang2 */
+		v |= 0x1;
+		break;
+	default:
+		return -EINVAL;
+	}
+	cx18_av_write_expect(cx, 0x809, v, v, 0xff);
+	state->audmode = vt->audmode;
+	return 0;
+}
+
+static int cx18_av_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+	struct cx18_av_state *state = to_cx18_av_state(sd);
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	u8 fmt = 0;	/* zero is autodetect */
+	u8 pal_m = 0;
+
+	if (state->radio == 0 && state->std == norm)
+		return 0;
+
+	state->radio = 0;
+	state->std = norm;
+
+	/* First tests should be against specific std */
+	if (state->std == V4L2_STD_NTSC_M_JP) {
+		fmt = 0x2;
+	} else if (state->std == V4L2_STD_NTSC_443) {
+		fmt = 0x3;
+	} else if (state->std == V4L2_STD_PAL_M) {
+		pal_m = 1;
+		fmt = 0x5;
+	} else if (state->std == V4L2_STD_PAL_N) {
+		fmt = 0x6;
+	} else if (state->std == V4L2_STD_PAL_Nc) {
+		fmt = 0x7;
+	} else if (state->std == V4L2_STD_PAL_60) {
+		fmt = 0x8;
+	} else {
+		/* Then, test against generic ones */
+		if (state->std & V4L2_STD_NTSC)
+			fmt = 0x1;
+		else if (state->std & V4L2_STD_PAL)
+			fmt = 0x4;
+		else if (state->std & V4L2_STD_SECAM)
+			fmt = 0xc;
+	}
+
+	CX18_DEBUG_INFO_DEV(sd, "changing video std to fmt %i\n", fmt);
+
+	/* Follow step 9 of section 3.16 in the cx18_av datasheet.
+	   Without this PAL may display a vertical ghosting effect.
+	   This happens for example with the Yuan MPC622. */
+	if (fmt >= 4 && fmt < 8) {
+		/* Set format to NTSC-M */
+		cx18_av_and_or(cx, 0x400, ~0xf, 1);
+		/* Turn off LCOMB */
+		cx18_av_and_or(cx, 0x47b, ~6, 0);
+	}
+	cx18_av_and_or(cx, 0x400, ~0x2f, fmt | 0x20);
+	cx18_av_and_or(cx, 0x403, ~0x3, pal_m);
+	cx18_av_std_setup(cx);
+	input_change(cx);
+	return 0;
+}
+
+static int cx18_av_s_radio(struct v4l2_subdev *sd)
+{
+	struct cx18_av_state *state = to_cx18_av_state(sd);
+	state->radio = 1;
+	return 0;
+}
+
+static int cx18_av_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct v4l2_subdev *sd = to_sd(ctrl);
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		cx18_av_write(cx, 0x414, ctrl->val - 128);
+		break;
+
+	case V4L2_CID_CONTRAST:
+		cx18_av_write(cx, 0x415, ctrl->val << 1);
+		break;
+
+	case V4L2_CID_SATURATION:
+		cx18_av_write(cx, 0x420, ctrl->val << 1);
+		cx18_av_write(cx, 0x421, ctrl->val << 1);
+		break;
+
+	case V4L2_CID_HUE:
+		cx18_av_write(cx, 0x422, ctrl->val);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int cx18_av_set_fmt(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *fmt = &format->format;
+	struct cx18_av_state *state = to_cx18_av_state(sd);
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
+	int is_50Hz = !(state->std & V4L2_STD_525_60);
+
+	if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED)
+		return -EINVAL;
+
+	fmt->field = V4L2_FIELD_INTERLACED;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+	Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4;
+	Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4;
+
+	Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4;
+	Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4;
+
+	/*
+	 * This adjustment reflects the excess of vactive, set in
+	 * cx18_av_std_setup(), above standard values:
+	 *
+	 * 480 + 1 for 60 Hz systems
+	 * 576 + 3 for 50 Hz systems
+	 */
+	Vlines = fmt->height + (is_50Hz ? 3 : 1);
+
+	/*
+	 * Invalid height and width scaling requests are:
+	 * 1. width less than 1/16 of the source width
+	 * 2. width greater than the source width
+	 * 3. height less than 1/8 of the source height
+	 * 4. height greater than the source height
+	 */
+	if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) ||
+	    (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
+		CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n",
+			     fmt->width, fmt->height);
+		return -ERANGE;
+	}
+
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+		return 0;
+
+	HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
+	VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
+	VSC &= 0x1fff;
+
+	if (fmt->width >= 385)
+		filter = 0;
+	else if (fmt->width > 192)
+		filter = 1;
+	else if (fmt->width > 96)
+		filter = 2;
+	else
+		filter = 3;
+
+	CX18_DEBUG_INFO_DEV(sd,
+			    "decoder set size %dx%d -> scale  %ux%u\n",
+			    fmt->width, fmt->height, HSC, VSC);
+
+	/* HSCALE=HSC */
+	cx18_av_write(cx, 0x418, HSC & 0xff);
+	cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff);
+	cx18_av_write(cx, 0x41a, HSC >> 16);
+	/* VSCALE=VSC */
+	cx18_av_write(cx, 0x41c, VSC & 0xff);
+	cx18_av_write(cx, 0x41d, VSC >> 8);
+	/* VS_INTRLACE=1 VFILT=filter */
+	cx18_av_write(cx, 0x41e, 0x8 | filter);
+	return 0;
+}
+
+static int cx18_av_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	CX18_DEBUG_INFO_DEV(sd, "%s output\n", enable ? "enable" : "disable");
+	if (enable) {
+		cx18_av_write(cx, 0x115, 0x8c);
+		cx18_av_write(cx, 0x116, 0x07);
+	} else {
+		cx18_av_write(cx, 0x115, 0x00);
+		cx18_av_write(cx, 0x116, 0x00);
+	}
+	return 0;
+}
+
+static void log_video_status(struct cx18 *cx)
+{
+	static const char *const fmt_strs[] = {
+		"0x0",
+		"NTSC-M", "NTSC-J", "NTSC-4.43",
+		"PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60",
+		"0x9", "0xA", "0xB",
+		"SECAM",
+		"0xD", "0xE", "0xF"
+	};
+
+	struct cx18_av_state *state = &cx->av_state;
+	struct v4l2_subdev *sd = &state->sd;
+	u8 vidfmt_sel = cx18_av_read(cx, 0x400) & 0xf;
+	u8 gen_stat1 = cx18_av_read(cx, 0x40d);
+	u8 gen_stat2 = cx18_av_read(cx, 0x40e);
+	int vid_input = state->vid_input;
+
+	CX18_INFO_DEV(sd, "Video signal:              %spresent\n",
+		      (gen_stat2 & 0x20) ? "" : "not ");
+	CX18_INFO_DEV(sd, "Detected format:           %s\n",
+		      fmt_strs[gen_stat1 & 0xf]);
+
+	CX18_INFO_DEV(sd, "Specified standard:        %s\n",
+		      vidfmt_sel ? fmt_strs[vidfmt_sel]
+				 : "automatic detection");
+
+	if (vid_input >= CX18_AV_COMPOSITE1 &&
+	    vid_input <= CX18_AV_COMPOSITE8) {
+		CX18_INFO_DEV(sd, "Specified video input:     Composite %d\n",
+			      vid_input - CX18_AV_COMPOSITE1 + 1);
+	} else {
+		CX18_INFO_DEV(sd, "Specified video input:     S-Video (Luma In%d, Chroma In%d)\n",
+			      (vid_input & 0xf0) >> 4,
+			      (vid_input & 0xf00) >> 8);
+	}
+
+	CX18_INFO_DEV(sd, "Specified audioclock freq: %d Hz\n",
+		      state->audclk_freq);
+}
+
+static void log_audio_status(struct cx18 *cx)
+{
+	struct cx18_av_state *state = &cx->av_state;
+	struct v4l2_subdev *sd = &state->sd;
+	u8 download_ctl = cx18_av_read(cx, 0x803);
+	u8 mod_det_stat0 = cx18_av_read(cx, 0x804);
+	u8 mod_det_stat1 = cx18_av_read(cx, 0x805);
+	u8 audio_config = cx18_av_read(cx, 0x808);
+	u8 pref_mode = cx18_av_read(cx, 0x809);
+	u8 afc0 = cx18_av_read(cx, 0x80b);
+	u8 mute_ctl = cx18_av_read(cx, 0x8d3);
+	int aud_input = state->aud_input;
+	char *p;
+
+	switch (mod_det_stat0) {
+	case 0x00: p = "mono"; break;
+	case 0x01: p = "stereo"; break;
+	case 0x02: p = "dual"; break;
+	case 0x04: p = "tri"; break;
+	case 0x10: p = "mono with SAP"; break;
+	case 0x11: p = "stereo with SAP"; break;
+	case 0x12: p = "dual with SAP"; break;
+	case 0x14: p = "tri with SAP"; break;
+	case 0xfe: p = "forced mode"; break;
+	default: p = "not defined"; break;
+	}
+	CX18_INFO_DEV(sd, "Detected audio mode:       %s\n", p);
+
+	switch (mod_det_stat1) {
+	case 0x00: p = "not defined"; break;
+	case 0x01: p = "EIAJ"; break;
+	case 0x02: p = "A2-M"; break;
+	case 0x03: p = "A2-BG"; break;
+	case 0x04: p = "A2-DK1"; break;
+	case 0x05: p = "A2-DK2"; break;
+	case 0x06: p = "A2-DK3"; break;
+	case 0x07: p = "A1 (6.0 MHz FM Mono)"; break;
+	case 0x08: p = "AM-L"; break;
+	case 0x09: p = "NICAM-BG"; break;
+	case 0x0a: p = "NICAM-DK"; break;
+	case 0x0b: p = "NICAM-I"; break;
+	case 0x0c: p = "NICAM-L"; break;
+	case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break;
+	case 0x0e: p = "IF FM Radio"; break;
+	case 0x0f: p = "BTSC"; break;
+	case 0x10: p = "detected chrominance"; break;
+	case 0xfd: p = "unknown audio standard"; break;
+	case 0xfe: p = "forced audio standard"; break;
+	case 0xff: p = "no detected audio standard"; break;
+	default: p = "not defined"; break;
+	}
+	CX18_INFO_DEV(sd, "Detected audio standard:   %s\n", p);
+	CX18_INFO_DEV(sd, "Audio muted:               %s\n",
+		      (mute_ctl & 0x2) ? "yes" : "no");
+	CX18_INFO_DEV(sd, "Audio microcontroller:     %s\n",
+		      (download_ctl & 0x10) ? "running" : "stopped");
+
+	switch (audio_config >> 4) {
+	case 0x00: p = "undefined"; break;
+	case 0x01: p = "BTSC"; break;
+	case 0x02: p = "EIAJ"; break;
+	case 0x03: p = "A2-M"; break;
+	case 0x04: p = "A2-BG"; break;
+	case 0x05: p = "A2-DK1"; break;
+	case 0x06: p = "A2-DK2"; break;
+	case 0x07: p = "A2-DK3"; break;
+	case 0x08: p = "A1 (6.0 MHz FM Mono)"; break;
+	case 0x09: p = "AM-L"; break;
+	case 0x0a: p = "NICAM-BG"; break;
+	case 0x0b: p = "NICAM-DK"; break;
+	case 0x0c: p = "NICAM-I"; break;
+	case 0x0d: p = "NICAM-L"; break;
+	case 0x0e: p = "FM radio"; break;
+	case 0x0f: p = "automatic detection"; break;
+	default: p = "undefined"; break;
+	}
+	CX18_INFO_DEV(sd, "Configured audio standard: %s\n", p);
+
+	if ((audio_config >> 4) < 0xF) {
+		switch (audio_config & 0xF) {
+		case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break;
+		case 0x01: p = "MONO2 (LANGUAGE B)"; break;
+		case 0x02: p = "MONO3 (STEREO forced MONO)"; break;
+		case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break;
+		case 0x04: p = "STEREO"; break;
+		case 0x05: p = "DUAL1 (AC)"; break;
+		case 0x06: p = "DUAL2 (BC)"; break;
+		case 0x07: p = "DUAL3 (AB)"; break;
+		default: p = "undefined";
+		}
+		CX18_INFO_DEV(sd, "Configured audio mode:     %s\n", p);
+	} else {
+		switch (audio_config & 0xF) {
+		case 0x00: p = "BG"; break;
+		case 0x01: p = "DK1"; break;
+		case 0x02: p = "DK2"; break;
+		case 0x03: p = "DK3"; break;
+		case 0x04: p = "I"; break;
+		case 0x05: p = "L"; break;
+		case 0x06: p = "BTSC"; break;
+		case 0x07: p = "EIAJ"; break;
+		case 0x08: p = "A2-M"; break;
+		case 0x09: p = "FM Radio (4.5 MHz)"; break;
+		case 0x0a: p = "FM Radio (5.5 MHz)"; break;
+		case 0x0b: p = "S-Video"; break;
+		case 0x0f: p = "automatic standard and mode detection"; break;
+		default: p = "undefined"; break;
+		}
+		CX18_INFO_DEV(sd, "Configured audio system:   %s\n", p);
+	}
+
+	if (aud_input)
+		CX18_INFO_DEV(sd, "Specified audio input:     Tuner (In%d)\n",
+			      aud_input);
+	else
+		CX18_INFO_DEV(sd, "Specified audio input:     External\n");
+
+	switch (pref_mode & 0xf) {
+	case 0: p = "mono/language A"; break;
+	case 1: p = "language B"; break;
+	case 2: p = "language C"; break;
+	case 3: p = "analog fallback"; break;
+	case 4: p = "stereo"; break;
+	case 5: p = "language AC"; break;
+	case 6: p = "language BC"; break;
+	case 7: p = "language AB"; break;
+	default: p = "undefined"; break;
+	}
+	CX18_INFO_DEV(sd, "Preferred audio mode:      %s\n", p);
+
+	if ((audio_config & 0xf) == 0xf) {
+		switch ((afc0 >> 3) & 0x1) {
+		case 0: p = "system DK"; break;
+		case 1: p = "system L"; break;
+		}
+		CX18_INFO_DEV(sd, "Selected 65 MHz format:    %s\n", p);
+
+		switch (afc0 & 0x7) {
+		case 0: p = "Chroma"; break;
+		case 1: p = "BTSC"; break;
+		case 2: p = "EIAJ"; break;
+		case 3: p = "A2-M"; break;
+		case 4: p = "autodetect"; break;
+		default: p = "undefined"; break;
+		}
+		CX18_INFO_DEV(sd, "Selected 45 MHz format:    %s\n", p);
+	}
+}
+
+static int cx18_av_log_status(struct v4l2_subdev *sd)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	log_video_status(cx);
+	log_audio_status(cx);
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int cx18_av_g_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	if ((reg->reg & 0x3) != 0)
+		return -EINVAL;
+	reg->size = 4;
+	reg->val = cx18_av_read4(cx, reg->reg & 0x00000ffc);
+	return 0;
+}
+
+static int cx18_av_s_register(struct v4l2_subdev *sd,
+			      const struct v4l2_dbg_register *reg)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	if ((reg->reg & 0x3) != 0)
+		return -EINVAL;
+	cx18_av_write4(cx, reg->reg & 0x00000ffc, reg->val);
+	return 0;
+}
+#endif
+
+static const struct v4l2_ctrl_ops cx18_av_ctrl_ops = {
+	.s_ctrl = cx18_av_s_ctrl,
+};
+
+static const struct v4l2_subdev_core_ops cx18_av_general_ops = {
+	.log_status = cx18_av_log_status,
+	.load_fw = cx18_av_load_fw,
+	.reset = cx18_av_reset,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = cx18_av_g_register,
+	.s_register = cx18_av_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_tuner_ops cx18_av_tuner_ops = {
+	.s_radio = cx18_av_s_radio,
+	.s_frequency = cx18_av_s_frequency,
+	.g_tuner = cx18_av_g_tuner,
+	.s_tuner = cx18_av_s_tuner,
+};
+
+static const struct v4l2_subdev_audio_ops cx18_av_audio_ops = {
+	.s_clock_freq = cx18_av_s_clock_freq,
+	.s_routing = cx18_av_s_audio_routing,
+};
+
+static const struct v4l2_subdev_video_ops cx18_av_video_ops = {
+	.s_std = cx18_av_s_std,
+	.s_routing = cx18_av_s_video_routing,
+	.s_stream = cx18_av_s_stream,
+};
+
+static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops = {
+	.decode_vbi_line = cx18_av_decode_vbi_line,
+	.g_sliced_fmt = cx18_av_g_sliced_fmt,
+	.s_sliced_fmt = cx18_av_s_sliced_fmt,
+	.s_raw_fmt = cx18_av_s_raw_fmt,
+};
+
+static const struct v4l2_subdev_pad_ops cx18_av_pad_ops = {
+	.set_fmt = cx18_av_set_fmt,
+};
+
+static const struct v4l2_subdev_ops cx18_av_ops = {
+	.core = &cx18_av_general_ops,
+	.tuner = &cx18_av_tuner_ops,
+	.audio = &cx18_av_audio_ops,
+	.video = &cx18_av_video_ops,
+	.vbi = &cx18_av_vbi_ops,
+	.pad = &cx18_av_pad_ops,
+};
+
+int cx18_av_probe(struct cx18 *cx)
+{
+	struct cx18_av_state *state = &cx->av_state;
+	struct v4l2_subdev *sd;
+	int err;
+
+	state->rev = cx18_av_read4(cx, CXADEC_CHIP_CTRL) & 0xffff;
+
+	state->vid_input = CX18_AV_COMPOSITE7;
+	state->aud_input = CX18_AV_AUDIO8;
+	state->audclk_freq = 48000;
+	state->audmode = V4L2_TUNER_MODE_LANG1;
+	state->slicer_line_delay = 0;
+	state->slicer_line_offset = (10 + state->slicer_line_delay - 2);
+
+	sd = &state->sd;
+	v4l2_subdev_init(sd, &cx18_av_ops);
+	v4l2_set_subdevdata(sd, cx);
+	snprintf(sd->name, sizeof(sd->name),
+		 "%s %03x", cx->v4l2_dev.name, (state->rev >> 4));
+	sd->grp_id = CX18_HW_418_AV;
+	v4l2_ctrl_handler_init(&state->hdl, 9);
+	v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
+			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
+			V4L2_CID_CONTRAST, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
+			V4L2_CID_SATURATION, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
+			V4L2_CID_HUE, -128, 127, 1, 0);
+
+	state->volume = v4l2_ctrl_new_std(&state->hdl,
+			&cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
+			0, 65535, 65535 / 100, 0);
+	v4l2_ctrl_new_std(&state->hdl,
+			&cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
+			0, 1, 1, 0);
+	v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops,
+			V4L2_CID_AUDIO_BALANCE,
+			0, 65535, 65535 / 100, 32768);
+	v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops,
+			V4L2_CID_AUDIO_BASS,
+			0, 65535, 65535 / 100, 32768);
+	v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops,
+			V4L2_CID_AUDIO_TREBLE,
+			0, 65535, 65535 / 100, 32768);
+	sd->ctrl_handler = &state->hdl;
+	if (state->hdl.error) {
+		int err = state->hdl.error;
+
+		v4l2_ctrl_handler_free(&state->hdl);
+		return err;
+	}
+	err = v4l2_device_register_subdev(&cx->v4l2_dev, sd);
+	if (err)
+		v4l2_ctrl_handler_free(&state->hdl);
+	else
+		cx18_av_init(cx);
+	return err;
+}
diff --git a/drivers/media/pci/cx18/cx18-av-core.h b/drivers/media/pci/cx18/cx18-av-core.h
new file mode 100644
index 000000000..1a37f269d
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-av-core.h
@@ -0,0 +1,385 @@
+/*
+ *  cx18 ADEC header
+ *
+ *  Derived from cx25840-core.h
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _CX18_AV_CORE_H_
+#define _CX18_AV_CORE_H_
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+
+struct cx18;
+
+enum cx18_av_video_input {
+	/* Composite video inputs In1-In8 */
+	CX18_AV_COMPOSITE1 = 1,
+	CX18_AV_COMPOSITE2,
+	CX18_AV_COMPOSITE3,
+	CX18_AV_COMPOSITE4,
+	CX18_AV_COMPOSITE5,
+	CX18_AV_COMPOSITE6,
+	CX18_AV_COMPOSITE7,
+	CX18_AV_COMPOSITE8,
+
+	/* S-Video inputs consist of one luma input (In1-In8) ORed with one
+	   chroma input (In5-In8) */
+	CX18_AV_SVIDEO_LUMA1 = 0x10,
+	CX18_AV_SVIDEO_LUMA2 = 0x20,
+	CX18_AV_SVIDEO_LUMA3 = 0x30,
+	CX18_AV_SVIDEO_LUMA4 = 0x40,
+	CX18_AV_SVIDEO_LUMA5 = 0x50,
+	CX18_AV_SVIDEO_LUMA6 = 0x60,
+	CX18_AV_SVIDEO_LUMA7 = 0x70,
+	CX18_AV_SVIDEO_LUMA8 = 0x80,
+	CX18_AV_SVIDEO_CHROMA4 = 0x400,
+	CX18_AV_SVIDEO_CHROMA5 = 0x500,
+	CX18_AV_SVIDEO_CHROMA6 = 0x600,
+	CX18_AV_SVIDEO_CHROMA7 = 0x700,
+	CX18_AV_SVIDEO_CHROMA8 = 0x800,
+
+	/* S-Video aliases for common luma/chroma combinations */
+	CX18_AV_SVIDEO1 = 0x510,
+	CX18_AV_SVIDEO2 = 0x620,
+	CX18_AV_SVIDEO3 = 0x730,
+	CX18_AV_SVIDEO4 = 0x840,
+
+	/* Component Video inputs consist of one luma input (In1-In8) ORed
+	   with a red chroma (In4-In6) and blue chroma input (In7-In8) */
+	CX18_AV_COMPONENT_LUMA1 = 0x1000,
+	CX18_AV_COMPONENT_LUMA2 = 0x2000,
+	CX18_AV_COMPONENT_LUMA3 = 0x3000,
+	CX18_AV_COMPONENT_LUMA4 = 0x4000,
+	CX18_AV_COMPONENT_LUMA5 = 0x5000,
+	CX18_AV_COMPONENT_LUMA6 = 0x6000,
+	CX18_AV_COMPONENT_LUMA7 = 0x7000,
+	CX18_AV_COMPONENT_LUMA8 = 0x8000,
+	CX18_AV_COMPONENT_R_CHROMA4 = 0x40000,
+	CX18_AV_COMPONENT_R_CHROMA5 = 0x50000,
+	CX18_AV_COMPONENT_R_CHROMA6 = 0x60000,
+	CX18_AV_COMPONENT_B_CHROMA7 = 0x700000,
+	CX18_AV_COMPONENT_B_CHROMA8 = 0x800000,
+
+	/* Component Video aliases for common combinations */
+	CX18_AV_COMPONENT1 = 0x861000,
+};
+
+enum cx18_av_audio_input {
+	/* Audio inputs: serial or In4-In8 */
+	CX18_AV_AUDIO_SERIAL1,
+	CX18_AV_AUDIO_SERIAL2,
+	CX18_AV_AUDIO4 = 4,
+	CX18_AV_AUDIO5,
+	CX18_AV_AUDIO6,
+	CX18_AV_AUDIO7,
+	CX18_AV_AUDIO8,
+};
+
+struct cx18_av_state {
+	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
+	struct v4l2_ctrl *volume;
+	int radio;
+	v4l2_std_id std;
+	enum cx18_av_video_input vid_input;
+	enum cx18_av_audio_input aud_input;
+	u32 audclk_freq;
+	int audmode;
+	u32 rev;
+	int is_initialized;
+
+	/*
+	 * The VBI slicer starts operating and counting lines, beginning at
+	 * slicer line count of 1, at D lines after the deassertion of VRESET.
+	 * This staring field line, S, is 6 (& 319) or 10 (& 273) for 625 or 525
+	 * line systems respectively.  Sliced ancillary data captured on VBI
+	 * slicer line M is inserted after the VBI slicer is done with line M,
+	 * when VBI slicer line count is N = M+1.  Thus when the VBI slicer
+	 * reports a VBI slicer line number with ancillary data, the IDID0 byte
+	 * indicates VBI slicer line N.  The actual field line that the captured
+	 * data comes from is
+	 *
+	 * L = M+(S+D-1) = N-1+(S+D-1) = N + (S+D-2).
+	 *
+	 * L is the line in the field, not frame, from which the VBI data came.
+	 * N is the line reported by the slicer in the ancillary data.
+	 * D is the slicer_line_delay value programmed into register 0x47f.
+	 * S is 6 for 625 line systems or 10 for 525 line systems
+	 * (S+D-2) is the slicer_line_offset used to convert slicer reported
+	 * line counts to actual field lines.
+	 */
+	int slicer_line_delay;
+	int slicer_line_offset;
+};
+
+
+/* Registers */
+#define CXADEC_CHIP_TYPE_TIGER     0x837
+#define CXADEC_CHIP_TYPE_MAKO      0x843
+
+#define CXADEC_HOST_REG1           0x000
+#define CXADEC_HOST_REG2           0x001
+
+#define CXADEC_CHIP_CTRL           0x100
+#define CXADEC_AFE_CTRL            0x104
+#define CXADEC_PLL_CTRL1           0x108
+#define CXADEC_VID_PLL_FRAC        0x10C
+#define CXADEC_AUX_PLL_FRAC        0x110
+#define CXADEC_PIN_CTRL1           0x114
+#define CXADEC_PIN_CTRL2           0x118
+#define CXADEC_PIN_CFG1            0x11C
+#define CXADEC_PIN_CFG2            0x120
+
+#define CXADEC_PIN_CFG3            0x124
+#define CXADEC_I2S_MCLK            0x127
+
+#define CXADEC_AUD_LOCK1           0x128
+#define CXADEC_AUD_LOCK2           0x12C
+#define CXADEC_POWER_CTRL          0x130
+#define CXADEC_AFE_DIAG_CTRL1      0x134
+#define CXADEC_AFE_DIAG_CTRL2      0x138
+#define CXADEC_AFE_DIAG_CTRL3      0x13C
+#define CXADEC_PLL_DIAG_CTRL       0x140
+#define CXADEC_TEST_CTRL1          0x144
+#define CXADEC_TEST_CTRL2          0x148
+#define CXADEC_BIST_STAT           0x14C
+#define CXADEC_DLL1_DIAG_CTRL      0x158
+#define CXADEC_DLL2_DIAG_CTRL      0x15C
+
+/* IR registers */
+#define CXADEC_IR_CTRL_REG         0x200
+#define CXADEC_IR_TXCLK_REG        0x204
+#define CXADEC_IR_RXCLK_REG        0x208
+#define CXADEC_IR_CDUTY_REG        0x20C
+#define CXADEC_IR_STAT_REG         0x210
+#define CXADEC_IR_IRQEN_REG        0x214
+#define CXADEC_IR_FILTER_REG       0x218
+#define CXADEC_IR_FIFO_REG         0x21C
+
+/* Video Registers */
+#define CXADEC_MODE_CTRL           0x400
+#define CXADEC_OUT_CTRL1           0x404
+#define CXADEC_OUT_CTRL2           0x408
+#define CXADEC_GEN_STAT            0x40C
+#define CXADEC_INT_STAT_MASK       0x410
+#define CXADEC_LUMA_CTRL           0x414
+
+#define CXADEC_BRIGHTNESS_CTRL_BYTE 0x414
+#define CXADEC_CONTRAST_CTRL_BYTE  0x415
+#define CXADEC_LUMA_CTRL_BYTE_3    0x416
+
+#define CXADEC_HSCALE_CTRL         0x418
+#define CXADEC_VSCALE_CTRL         0x41C
+
+#define CXADEC_CHROMA_CTRL         0x420
+
+#define CXADEC_USAT_CTRL_BYTE      0x420
+#define CXADEC_VSAT_CTRL_BYTE      0x421
+#define CXADEC_HUE_CTRL_BYTE       0x422
+
+#define CXADEC_VBI_LINE_CTRL1      0x424
+#define CXADEC_VBI_LINE_CTRL2      0x428
+#define CXADEC_VBI_LINE_CTRL3      0x42C
+#define CXADEC_VBI_LINE_CTRL4      0x430
+#define CXADEC_VBI_LINE_CTRL5      0x434
+#define CXADEC_VBI_FC_CFG          0x438
+#define CXADEC_VBI_MISC_CFG1       0x43C
+#define CXADEC_VBI_MISC_CFG2       0x440
+#define CXADEC_VBI_PAY1            0x444
+#define CXADEC_VBI_PAY2            0x448
+#define CXADEC_VBI_CUST1_CFG1      0x44C
+#define CXADEC_VBI_CUST1_CFG2      0x450
+#define CXADEC_VBI_CUST1_CFG3      0x454
+#define CXADEC_VBI_CUST2_CFG1      0x458
+#define CXADEC_VBI_CUST2_CFG2      0x45C
+#define CXADEC_VBI_CUST2_CFG3      0x460
+#define CXADEC_VBI_CUST3_CFG1      0x464
+#define CXADEC_VBI_CUST3_CFG2      0x468
+#define CXADEC_VBI_CUST3_CFG3      0x46C
+#define CXADEC_HORIZ_TIM_CTRL      0x470
+#define CXADEC_VERT_TIM_CTRL       0x474
+#define CXADEC_SRC_COMB_CFG        0x478
+#define CXADEC_CHROMA_VBIOFF_CFG   0x47C
+#define CXADEC_FIELD_COUNT         0x480
+#define CXADEC_MISC_TIM_CTRL       0x484
+#define CXADEC_DFE_CTRL1           0x488
+#define CXADEC_DFE_CTRL2           0x48C
+#define CXADEC_DFE_CTRL3           0x490
+#define CXADEC_PLL_CTRL2           0x494
+#define CXADEC_HTL_CTRL            0x498
+#define CXADEC_COMB_CTRL           0x49C
+#define CXADEC_CRUSH_CTRL          0x4A0
+#define CXADEC_SOFT_RST_CTRL       0x4A4
+#define CXADEC_MV_DT_CTRL2         0x4A8
+#define CXADEC_MV_DT_CTRL3         0x4AC
+#define CXADEC_MISC_DIAG_CTRL      0x4B8
+
+#define CXADEC_DL_CTL              0x800
+#define CXADEC_DL_CTL_ADDRESS_LOW  0x800   /* Byte 1 in DL_CTL */
+#define CXADEC_DL_CTL_ADDRESS_HIGH 0x801   /* Byte 2 in DL_CTL */
+#define CXADEC_DL_CTL_DATA         0x802   /* Byte 3 in DL_CTL */
+#define CXADEC_DL_CTL_CONTROL      0x803   /* Byte 4 in DL_CTL */
+
+#define CXADEC_STD_DET_STATUS      0x804
+
+#define CXADEC_STD_DET_CTL         0x808
+#define CXADEC_STD_DET_CTL_AUD_CTL   0x808 /* Byte 1 in STD_DET_CTL */
+#define CXADEC_STD_DET_CTL_PREF_MODE 0x809 /* Byte 2 in STD_DET_CTL */
+
+#define CXADEC_DW8051_INT          0x80C
+#define CXADEC_GENERAL_CTL         0x810
+#define CXADEC_AAGC_CTL            0x814
+#define CXADEC_IF_SRC_CTL          0x818
+#define CXADEC_ANLOG_DEMOD_CTL     0x81C
+#define CXADEC_ROT_FREQ_CTL        0x820
+#define CXADEC_FM1_CTL             0x824
+#define CXADEC_PDF_CTL             0x828
+#define CXADEC_DFT1_CTL1           0x82C
+#define CXADEC_DFT1_CTL2           0x830
+#define CXADEC_DFT_STATUS          0x834
+#define CXADEC_DFT2_CTL1           0x838
+#define CXADEC_DFT2_CTL2           0x83C
+#define CXADEC_DFT2_STATUS         0x840
+#define CXADEC_DFT3_CTL1           0x844
+#define CXADEC_DFT3_CTL2           0x848
+#define CXADEC_DFT3_STATUS         0x84C
+#define CXADEC_DFT4_CTL1           0x850
+#define CXADEC_DFT4_CTL2           0x854
+#define CXADEC_DFT4_STATUS         0x858
+#define CXADEC_AM_MTS_DET          0x85C
+#define CXADEC_ANALOG_MUX_CTL      0x860
+#define CXADEC_DIG_PLL_CTL1        0x864
+#define CXADEC_DIG_PLL_CTL2        0x868
+#define CXADEC_DIG_PLL_CTL3        0x86C
+#define CXADEC_DIG_PLL_CTL4        0x870
+#define CXADEC_DIG_PLL_CTL5        0x874
+#define CXADEC_DEEMPH_GAIN_CTL     0x878
+#define CXADEC_DEEMPH_COEF1        0x87C
+#define CXADEC_DEEMPH_COEF2        0x880
+#define CXADEC_DBX1_CTL1           0x884
+#define CXADEC_DBX1_CTL2           0x888
+#define CXADEC_DBX1_STATUS         0x88C
+#define CXADEC_DBX2_CTL1           0x890
+#define CXADEC_DBX2_CTL2           0x894
+#define CXADEC_DBX2_STATUS         0x898
+#define CXADEC_AM_FM_DIFF          0x89C
+
+/* NICAM registers go here */
+#define CXADEC_NICAM_STATUS        0x8C8
+#define CXADEC_DEMATRIX_CTL        0x8CC
+
+#define CXADEC_PATH1_CTL1          0x8D0
+#define CXADEC_PATH1_VOL_CTL       0x8D4
+#define CXADEC_PATH1_EQ_CTL        0x8D8
+#define CXADEC_PATH1_SC_CTL        0x8DC
+
+#define CXADEC_PATH2_CTL1          0x8E0
+#define CXADEC_PATH2_VOL_CTL       0x8E4
+#define CXADEC_PATH2_EQ_CTL        0x8E8
+#define CXADEC_PATH2_SC_CTL        0x8EC
+
+#define CXADEC_SRC_CTL             0x8F0
+#define CXADEC_SRC_LF_COEF         0x8F4
+#define CXADEC_SRC1_CTL            0x8F8
+#define CXADEC_SRC2_CTL            0x8FC
+#define CXADEC_SRC3_CTL            0x900
+#define CXADEC_SRC4_CTL            0x904
+#define CXADEC_SRC5_CTL            0x908
+#define CXADEC_SRC6_CTL            0x90C
+
+#define CXADEC_BASEBAND_OUT_SEL    0x910
+#define CXADEC_I2S_IN_CTL          0x914
+#define CXADEC_I2S_OUT_CTL         0x918
+#define CXADEC_AC97_CTL            0x91C
+#define CXADEC_QAM_PDF             0x920
+#define CXADEC_QAM_CONST_DEC       0x924
+#define CXADEC_QAM_ROTATOR_FREQ    0x948
+
+/* Bit definitions / settings used in Mako Audio */
+#define CXADEC_PREF_MODE_MONO_LANGA        0
+#define CXADEC_PREF_MODE_MONO_LANGB        1
+#define CXADEC_PREF_MODE_MONO_LANGC        2
+#define CXADEC_PREF_MODE_FALLBACK          3
+#define CXADEC_PREF_MODE_STEREO            4
+#define CXADEC_PREF_MODE_DUAL_LANG_AC      5
+#define CXADEC_PREF_MODE_DUAL_LANG_BC      6
+#define CXADEC_PREF_MODE_DUAL_LANG_AB      7
+
+
+#define CXADEC_DETECT_STEREO               1
+#define CXADEC_DETECT_DUAL                 2
+#define CXADEC_DETECT_TRI                  4
+#define CXADEC_DETECT_SAP                  0x10
+#define CXADEC_DETECT_NO_SIGNAL            0xFF
+
+#define CXADEC_SELECT_AUDIO_STANDARD_BG    0xF0  /* NICAM BG and A2 BG */
+#define CXADEC_SELECT_AUDIO_STANDARD_DK1   0xF1  /* NICAM DK and A2 DK */
+#define CXADEC_SELECT_AUDIO_STANDARD_DK2   0xF2
+#define CXADEC_SELECT_AUDIO_STANDARD_DK3   0xF3
+#define CXADEC_SELECT_AUDIO_STANDARD_I     0xF4  /* NICAM I and A1 */
+#define CXADEC_SELECT_AUDIO_STANDARD_L     0xF5  /* NICAM L and System L AM */
+#define CXADEC_SELECT_AUDIO_STANDARD_BTSC  0xF6
+#define CXADEC_SELECT_AUDIO_STANDARD_EIAJ  0xF7
+#define CXADEC_SELECT_AUDIO_STANDARD_A2_M  0xF8  /* A2 M */
+#define CXADEC_SELECT_AUDIO_STANDARD_FM    0xF9  /* FM radio */
+#define CXADEC_SELECT_AUDIO_STANDARD_AUTO  0xFF  /* Auto detect */
+
+static inline struct cx18_av_state *to_cx18_av_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct cx18_av_state, sd);
+}
+
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct cx18_av_state, hdl)->sd;
+}
+
+/* ----------------------------------------------------------------------- */
+/* cx18_av-core.c							   */
+int cx18_av_write(struct cx18 *cx, u16 addr, u8 value);
+int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value);
+int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value);
+int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask);
+int cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval,
+			  u32 mask);
+u8 cx18_av_read(struct cx18 *cx, u16 addr);
+u32 cx18_av_read4(struct cx18 *cx, u16 addr);
+int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value);
+int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value);
+void cx18_av_std_setup(struct cx18 *cx);
+
+int cx18_av_probe(struct cx18 *cx);
+
+/* ----------------------------------------------------------------------- */
+/* cx18_av-firmware.c                                                      */
+int cx18_av_loadfw(struct cx18 *cx);
+
+/* ----------------------------------------------------------------------- */
+/* cx18_av-audio.c                                                         */
+int cx18_av_s_clock_freq(struct v4l2_subdev *sd, u32 freq);
+void cx18_av_audio_set_path(struct cx18 *cx);
+extern const struct v4l2_ctrl_ops cx18_av_audio_ctrl_ops;
+
+/* ----------------------------------------------------------------------- */
+/* cx18_av-vbi.c                                                           */
+int cx18_av_decode_vbi_line(struct v4l2_subdev *sd,
+			   struct v4l2_decode_vbi_line *vbi);
+int cx18_av_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt);
+int cx18_av_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
+int cx18_av_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
+
+#endif
diff --git a/drivers/media/pci/cx18/cx18-av-firmware.c b/drivers/media/pci/cx18/cx18-av-firmware.c
new file mode 100644
index 000000000..543ace7a4
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-av-firmware.c
@@ -0,0 +1,219 @@
+/*
+ *  cx18 ADEC firmware functions
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include <linux/firmware.h>
+
+#define CX18_AUDIO_ENABLE    0xc72014
+#define CX18_AI1_MUX_MASK    0x30
+#define CX18_AI1_MUX_I2S1    0x00
+#define CX18_AI1_MUX_I2S2    0x10
+#define CX18_AI1_MUX_843_I2S 0x20
+#define CX18_AI1_MUX_INVALID 0x30
+
+#define FWFILE "v4l-cx23418-dig.fw"
+
+static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw)
+{
+	struct v4l2_subdev *sd = &cx->av_state.sd;
+	int ret = 0;
+	const u8 *data;
+	u32 size;
+	int addr;
+	u32 expected, dl_control;
+
+	/* Ensure we put the 8051 in reset and enable firmware upload mode */
+	dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+	do {
+		dl_control &= 0x00ffffff;
+		dl_control |= 0x0f000000;
+		cx18_av_write4_noretry(cx, CXADEC_DL_CTL, dl_control);
+		dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+	} while ((dl_control & 0xff000000) != 0x0f000000);
+
+	/* Read and auto increment until at address 0x0000 */
+	while (dl_control & 0x3fff)
+		dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+
+	data = fw->data;
+	size = fw->size;
+	for (addr = 0; addr < size; addr++) {
+		dl_control &= 0xffff3fff; /* ignore top 2 bits of address */
+		expected = 0x0f000000 | ((u32)data[addr] << 16) | addr;
+		if (expected != dl_control) {
+			CX18_ERR_DEV(sd, "verification of %s firmware load failed: expected %#010x got %#010x\n",
+				     FWFILE, expected, dl_control);
+			ret = -EIO;
+			break;
+		}
+		dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+	}
+	if (ret == 0)
+		CX18_INFO_DEV(sd, "verified load of %s firmware (%d bytes)\n",
+			      FWFILE, size);
+	return ret;
+}
+
+int cx18_av_loadfw(struct cx18 *cx)
+{
+	struct v4l2_subdev *sd = &cx->av_state.sd;
+	const struct firmware *fw = NULL;
+	u32 size;
+	u32 u, v;
+	const u8 *ptr;
+	int i;
+	int retries1 = 0;
+
+	if (request_firmware(&fw, FWFILE, &cx->pci_dev->dev) != 0) {
+		CX18_ERR_DEV(sd, "unable to open firmware %s\n", FWFILE);
+		return -EINVAL;
+	}
+
+	/* The firmware load often has byte errors, so allow for several
+	   retries, both at byte level and at the firmware load level. */
+	while (retries1 < 5) {
+		cx18_av_write4_expect(cx, CXADEC_CHIP_CTRL, 0x00010000,
+					  0x00008430, 0xffffffff); /* cx25843 */
+		cx18_av_write_expect(cx, CXADEC_STD_DET_CTL, 0xf6, 0xf6, 0xff);
+
+		/* Reset the Mako core, Register is alias of CXADEC_CHIP_CTRL */
+		cx18_av_write4_expect(cx, 0x8100, 0x00010000,
+					  0x00008430, 0xffffffff); /* cx25843 */
+
+		/* Put the 8051 in reset and enable firmware upload */
+		cx18_av_write4_noretry(cx, CXADEC_DL_CTL, 0x0F000000);
+
+		ptr = fw->data;
+		size = fw->size;
+
+		for (i = 0; i < size; i++) {
+			u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16);
+			u32 value = 0;
+			int retries2;
+			int unrec_err = 0;
+
+			for (retries2 = 0; retries2 < CX18_MAX_MMIO_WR_RETRIES;
+			     retries2++) {
+				cx18_av_write4_noretry(cx, CXADEC_DL_CTL,
+						       dl_control);
+				udelay(10);
+				value = cx18_av_read4(cx, CXADEC_DL_CTL);
+				if (value == dl_control)
+					break;
+				/* Check if we can correct the byte by changing
+				   the address.  We can only write the lower
+				   address byte of the address. */
+				if ((value & 0x3F00) != (dl_control & 0x3F00)) {
+					unrec_err = 1;
+					break;
+				}
+			}
+			if (unrec_err || retries2 >= CX18_MAX_MMIO_WR_RETRIES)
+				break;
+		}
+		if (i == size)
+			break;
+		retries1++;
+	}
+	if (retries1 >= 5) {
+		CX18_ERR_DEV(sd, "unable to load firmware %s\n", FWFILE);
+		release_firmware(fw);
+		return -EIO;
+	}
+
+	cx18_av_write4_expect(cx, CXADEC_DL_CTL,
+				0x03000000 | fw->size, 0x03000000, 0x13000000);
+
+	CX18_INFO_DEV(sd, "loaded %s firmware (%d bytes)\n", FWFILE, size);
+
+	if (cx18_av_verifyfw(cx, fw) == 0)
+		cx18_av_write4_expect(cx, CXADEC_DL_CTL,
+				0x13000000 | fw->size, 0x13000000, 0x13000000);
+
+	/* Output to the 416 */
+	cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x78000);
+
+	/* Audio input control 1 set to Sony mode */
+	/* Audio output input 2 is 0 for slave operation input */
+	/* 0xC4000914[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
+	/* 0xC4000914[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
+	   after WS transition for first bit of audio word. */
+	cx18_av_write4(cx, CXADEC_I2S_IN_CTL, 0x000000A0);
+
+	/* Audio output control 1 is set to Sony mode */
+	/* Audio output control 2 is set to 1 for master mode */
+	/* 0xC4000918[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
+	/* 0xC4000918[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
+	   after WS transition for first bit of audio word. */
+	/* 0xC4000918[8]: 0 = slave operation, 1 = master (SCK_OUT and WS_OUT
+	   are generated) */
+	cx18_av_write4(cx, CXADEC_I2S_OUT_CTL, 0x000001A0);
+
+	/* set alt I2s master clock to /0x16 and enable alt divider i2s
+	   passthrough */
+	cx18_av_write4(cx, CXADEC_PIN_CFG3, 0x5600B687);
+
+	cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, 0x000000F6, 0x000000F6,
+								  0x3F00FFFF);
+	/* CxDevWrReg(CXADEC_STD_DET_CTL, 0x000000FF); */
+
+	/* Set bit 0 in register 0x9CC to signify that this is MiniMe. */
+	/* Register 0x09CC is defined by the Merlin firmware, and doesn't
+	   have a name in the spec. */
+	cx18_av_write4(cx, 0x09CC, 1);
+
+	v = cx18_read_reg(cx, CX18_AUDIO_ENABLE);
+	/* If bit 11 is 1, clear bit 10 */
+	if (v & 0x800)
+		cx18_write_reg_expect(cx, v & 0xFFFFFBFF, CX18_AUDIO_ENABLE,
+				      0, 0x400);
+
+	/* Toggle the AI1 MUX */
+	v = cx18_read_reg(cx, CX18_AUDIO_ENABLE);
+	u = v & CX18_AI1_MUX_MASK;
+	v &= ~CX18_AI1_MUX_MASK;
+	if (u == CX18_AI1_MUX_843_I2S || u == CX18_AI1_MUX_INVALID) {
+		/* Switch to I2S1 */
+		v |= CX18_AI1_MUX_I2S1;
+		cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
+				      v, CX18_AI1_MUX_MASK);
+		/* Switch back to the A/V decoder core I2S output */
+		v = (v & ~CX18_AI1_MUX_MASK) | CX18_AI1_MUX_843_I2S;
+	} else {
+		/* Switch to the A/V decoder core I2S output */
+		v |= CX18_AI1_MUX_843_I2S;
+		cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
+				      v, CX18_AI1_MUX_MASK);
+		/* Switch back to I2S1 or I2S2 */
+		v = (v & ~CX18_AI1_MUX_MASK) | u;
+	}
+	cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
+			      v, CX18_AI1_MUX_MASK);
+
+	/* Enable WW auto audio standard detection */
+	v = cx18_av_read4(cx, CXADEC_STD_DET_CTL);
+	v |= 0xFF;   /* Auto by default */
+	v |= 0x400;  /* Stereo by default */
+	v |= 0x14000000;
+	cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, v, v, 0x3F00FFFF);
+
+	release_firmware(fw);
+	return 0;
+}
+
+MODULE_FIRMWARE(FWFILE);
diff --git a/drivers/media/pci/cx18/cx18-av-vbi.c b/drivers/media/pci/cx18/cx18-av-vbi.c
new file mode 100644
index 000000000..a002537a3
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-av-vbi.c
@@ -0,0 +1,308 @@
+/*
+ *  cx18 ADEC VBI functions
+ *
+ *  Derived from cx25840-vbi.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+
+#include "cx18-driver.h"
+
+/*
+ * For sliced VBI output, we set up to use VIP-1.1, 8-bit mode,
+ * NN counts 1 byte Dwords, an IDID with the VBI line # in it.
+ * Thus, according to the VIP-2 Spec, our VBI ancillary data lines
+ * (should!) look like:
+ *	4 byte EAV code:          0xff 0x00 0x00 0xRP
+ *	unknown number of possible idle bytes
+ *	3 byte Anc data preamble: 0x00 0xff 0xff
+ *	1 byte data identifier:   ne010iii (parity bits, 010, DID bits)
+ *	1 byte secondary data id: nessssss (parity bits, SDID bits)
+ *	1 byte data word count:   necccccc (parity bits, NN Dword count)
+ *	2 byte Internal DID:	  VBI-line-# 0x80
+ *	NN data bytes
+ *	1 byte checksum
+ *	Fill bytes needed to fil out to 4*NN bytes of payload
+ *
+ * The RP codes for EAVs when in VIP-1.1 mode, not in raw mode, &
+ * in the vertical blanking interval are:
+ *	0xb0 (Task         0 VerticalBlank HorizontalBlank 0 0 0 0)
+ *	0xf0 (Task EvenField VerticalBlank HorizontalBlank 0 0 0 0)
+ *
+ * Since the V bit is only allowed to toggle in the EAV RP code, just
+ * before the first active region line and for active lines, they are:
+ *	0x90 (Task         0 0 HorizontalBlank 0 0 0 0)
+ *	0xd0 (Task EvenField 0 HorizontalBlank 0 0 0 0)
+ *
+ * The user application DID bytes we care about are:
+ *	0x91 (1 0 010        0 !ActiveLine AncDataPresent)
+ *	0x55 (0 1 010 2ndField !ActiveLine AncDataPresent)
+ *
+ */
+static const u8 sliced_vbi_did[2] = { 0x91, 0x55 };
+
+struct vbi_anc_data {
+	/* u8 eav[4]; */
+	/* u8 idle[]; Variable number of idle bytes */
+	u8 preamble[3];
+	u8 did;
+	u8 sdid;
+	u8 data_count;
+	u8 idid[2];
+	u8 payload[1]; /* data_count of payload */
+	/* u8 checksum; */
+	/* u8 fill[]; Variable number of fill bytes */
+};
+
+static int odd_parity(u8 c)
+{
+	c ^= (c >> 4);
+	c ^= (c >> 2);
+	c ^= (c >> 1);
+
+	return c & 1;
+}
+
+static int decode_vps(u8 *dst, u8 *p)
+{
+	static const u8 biphase_tbl[] = {
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
+		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
+		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
+		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
+		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
+		0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87,
+		0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3,
+		0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85,
+		0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1,
+		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
+		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
+		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
+		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
+		0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86,
+		0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2,
+		0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84,
+		0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0,
+		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
+		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
+		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
+		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
+		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+	};
+
+	u8 c, err = 0;
+	int i;
+
+	for (i = 0; i < 2 * 13; i += 2) {
+		err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]];
+		c = (biphase_tbl[p[i + 1]] & 0xf) |
+		    ((biphase_tbl[p[i]] & 0xf) << 4);
+		dst[i / 2] = c;
+	}
+
+	return err & 0xf0;
+}
+
+int cx18_av_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	struct cx18_av_state *state = &cx->av_state;
+	static const u16 lcr2vbi[] = {
+		0, V4L2_SLICED_TELETEXT_B, 0,	/* 1 */
+		0, V4L2_SLICED_WSS_625, 0,	/* 4 */
+		V4L2_SLICED_CAPTION_525,	/* 6 */
+		0, 0, V4L2_SLICED_VPS, 0, 0,	/* 9 */
+		0, 0, 0, 0
+	};
+	int is_pal = !(state->std & V4L2_STD_525_60);
+	int i;
+
+	memset(svbi->service_lines, 0, sizeof(svbi->service_lines));
+	svbi->service_set = 0;
+
+	/* we're done if raw VBI is active */
+	if ((cx18_av_read(cx, 0x404) & 0x10) == 0)
+		return 0;
+
+	if (is_pal) {
+		for (i = 7; i <= 23; i++) {
+			u8 v = cx18_av_read(cx, 0x424 + i - 7);
+
+			svbi->service_lines[0][i] = lcr2vbi[v >> 4];
+			svbi->service_lines[1][i] = lcr2vbi[v & 0xf];
+			svbi->service_set |= svbi->service_lines[0][i] |
+				svbi->service_lines[1][i];
+		}
+	} else {
+		for (i = 10; i <= 21; i++) {
+			u8 v = cx18_av_read(cx, 0x424 + i - 10);
+
+			svbi->service_lines[0][i] = lcr2vbi[v >> 4];
+			svbi->service_lines[1][i] = lcr2vbi[v & 0xf];
+			svbi->service_set |= svbi->service_lines[0][i] |
+				svbi->service_lines[1][i];
+		}
+	}
+	return 0;
+}
+
+int cx18_av_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	struct cx18_av_state *state = &cx->av_state;
+
+	/* Setup standard */
+	cx18_av_std_setup(cx);
+
+	/* VBI Offset */
+	cx18_av_write(cx, 0x47f, state->slicer_line_delay);
+	cx18_av_write(cx, 0x404, 0x2e);
+	return 0;
+}
+
+int cx18_av_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	struct cx18_av_state *state = &cx->av_state;
+	int is_pal = !(state->std & V4L2_STD_525_60);
+	int i, x;
+	u8 lcr[24];
+
+	for (x = 0; x <= 23; x++)
+		lcr[x] = 0x00;
+
+	/* Setup standard */
+	cx18_av_std_setup(cx);
+
+	/* Sliced VBI */
+	cx18_av_write(cx, 0x404, 0x32);	/* Ancillary data */
+	cx18_av_write(cx, 0x406, 0x13);
+	cx18_av_write(cx, 0x47f, state->slicer_line_delay);
+
+	/* Force impossible lines to 0 */
+	if (is_pal) {
+		for (i = 0; i <= 6; i++)
+			svbi->service_lines[0][i] =
+				svbi->service_lines[1][i] = 0;
+	} else {
+		for (i = 0; i <= 9; i++)
+			svbi->service_lines[0][i] =
+				svbi->service_lines[1][i] = 0;
+
+		for (i = 22; i <= 23; i++)
+			svbi->service_lines[0][i] =
+				svbi->service_lines[1][i] = 0;
+	}
+
+	/* Build register values for requested service lines */
+	for (i = 7; i <= 23; i++) {
+		for (x = 0; x <= 1; x++) {
+			switch (svbi->service_lines[1-x][i]) {
+			case V4L2_SLICED_TELETEXT_B:
+				lcr[i] |= 1 << (4 * x);
+				break;
+			case V4L2_SLICED_WSS_625:
+				lcr[i] |= 4 << (4 * x);
+				break;
+			case V4L2_SLICED_CAPTION_525:
+				lcr[i] |= 6 << (4 * x);
+				break;
+			case V4L2_SLICED_VPS:
+				lcr[i] |= 9 << (4 * x);
+				break;
+			}
+		}
+	}
+
+	if (is_pal) {
+		for (x = 1, i = 0x424; i <= 0x434; i++, x++)
+			cx18_av_write(cx, i, lcr[6 + x]);
+	} else {
+		for (x = 1, i = 0x424; i <= 0x430; i++, x++)
+			cx18_av_write(cx, i, lcr[9 + x]);
+		for (i = 0x431; i <= 0x434; i++)
+			cx18_av_write(cx, i, 0);
+	}
+
+	cx18_av_write(cx, 0x43c, 0x16);
+	/* Should match vblank set in cx18_av_std_setup() */
+	cx18_av_write(cx, 0x474, is_pal ? 38 : 26);
+	return 0;
+}
+
+int cx18_av_decode_vbi_line(struct v4l2_subdev *sd,
+				   struct v4l2_decode_vbi_line *vbi)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	struct cx18_av_state *state = &cx->av_state;
+	struct vbi_anc_data *anc = (struct vbi_anc_data *)vbi->p;
+	u8 *p;
+	int did, sdid, l, err = 0;
+
+	/*
+	 * Check for the ancillary data header for sliced VBI
+	 */
+	if (anc->preamble[0] ||
+			anc->preamble[1] != 0xff || anc->preamble[2] != 0xff ||
+			(anc->did != sliced_vbi_did[0] &&
+			 anc->did != sliced_vbi_did[1])) {
+		vbi->line = vbi->type = 0;
+		return 0;
+	}
+
+	did = anc->did;
+	sdid = anc->sdid & 0xf;
+	l = anc->idid[0] & 0x3f;
+	l += state->slicer_line_offset;
+	p = anc->payload;
+
+	/* Decode the SDID set by the slicer */
+	switch (sdid) {
+	case 1:
+		sdid = V4L2_SLICED_TELETEXT_B;
+		break;
+	case 4:
+		sdid = V4L2_SLICED_WSS_625;
+		break;
+	case 6:
+		sdid = V4L2_SLICED_CAPTION_525;
+		err = !odd_parity(p[0]) || !odd_parity(p[1]);
+		break;
+	case 9:
+		sdid = V4L2_SLICED_VPS;
+		if (decode_vps(p, p) != 0)
+			err = 1;
+		break;
+	default:
+		sdid = 0;
+		err = 1;
+		break;
+	}
+
+	vbi->type = err ? 0 : sdid;
+	vbi->line = err ? 0 : l;
+	vbi->is_second_field = err ? 0 : (did == sliced_vbi_did[1]);
+	vbi->p = p;
+	return 0;
+}
diff --git a/drivers/media/pci/cx18/cx18-cards.c b/drivers/media/pci/cx18/cx18-cards.c
new file mode 100644
index 000000000..c2cf965d6
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-cards.c
@@ -0,0 +1,633 @@
+/*
+ *  cx18 functions to query card hardware
+ *
+ *  Derived from ivtv-cards.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-cards.h"
+#include "cx18-av-core.h"
+#include "cx18-i2c.h"
+#include <media/i2c/cs5345.h>
+
+#define V4L2_STD_PAL_SECAM (V4L2_STD_PAL|V4L2_STD_SECAM)
+
+/********************** card configuration *******************************/
+
+/* usual i2c tuner addresses to probe */
+static struct cx18_card_tuner_i2c cx18_i2c_std = {
+	.radio = { I2C_CLIENT_END },
+	.demod = { 0x43, I2C_CLIENT_END },
+	.tv    = { 0x61, 0x60, I2C_CLIENT_END },
+};
+
+/*
+ * usual i2c tuner addresses to probe with additional demod address for
+ * an NXP TDA8295 at 0x42 (N.B. it can possibly be at 0x4b or 0x4c too).
+ */
+static struct cx18_card_tuner_i2c cx18_i2c_nxp = {
+	.radio = { I2C_CLIENT_END },
+	.demod = { 0x42, 0x43, I2C_CLIENT_END },
+	.tv    = { 0x61, 0x60, I2C_CLIENT_END },
+};
+
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
+   This keeps the PCI ID database up to date. Note that the entries
+   must be added under vendor 0x4444 (Conexant) as subsystem IDs.
+   New vendor IDs should still be added to the vendor ID list. */
+
+/* Hauppauge HVR-1600 cards */
+
+/* Note: for Hauppauge cards the tveeprom information is used instead
+   of PCI IDs */
+static const struct cx18_card cx18_card_hvr1600_esmt = {
+	.type = CX18_CARD_HVR_1600_ESMT,
+	.name = "Hauppauge HVR-1600",
+	.comment = "Simultaneous Digital and Analog TV capture supported\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_CS5345,
+	.hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL |
+		  CX18_HW_Z8F0811_IR_HAUP,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE7 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1, CX18_AV_SVIDEO1    },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+		{ CX18_CARD_INPUT_SVIDEO2,    2, CX18_AV_SVIDEO2    },
+		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER,
+		  CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+		{ CX18_CARD_INPUT_LINE_IN1,
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
+		{ CX18_CARD_INPUT_LINE_IN2,
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
+	},
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
+			 CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
+	.ddr = {
+		/* ESMT M13S128324A-5B memory */
+		.chip_config = 0x003,
+		.refresh = 0x30c,
+		.timing1 = 0x44220e82,
+		.timing2 = 0x08,
+		.tune_lane = 0,
+		.initial_emrs = 0,
+	},
+	.gpio_init.initial_value = 0x3001,
+	.gpio_init.direction = 0x3001,
+	.gpio_i2c_slave_reset = {
+		.active_lo_mask = 0x3001,
+		.msecs_asserted = 10,
+		.msecs_recovery = 40,
+		.ir_reset_mask  = 0x0001,
+	},
+	.i2c = &cx18_i2c_std,
+};
+
+static const struct cx18_card cx18_card_hvr1600_s5h1411 = {
+	.type = CX18_CARD_HVR_1600_S5H1411,
+	.name = "Hauppauge HVR-1600",
+	.comment = "Simultaneous Digital and Analog TV capture supported\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_CS5345,
+	.hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL |
+		  CX18_HW_Z8F0811_IR_HAUP,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE7 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1, CX18_AV_SVIDEO1    },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+		{ CX18_CARD_INPUT_SVIDEO2,    2, CX18_AV_SVIDEO2    },
+		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER,
+		  CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+		{ CX18_CARD_INPUT_LINE_IN1,
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
+		{ CX18_CARD_INPUT_LINE_IN2,
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
+	},
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
+			 CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
+	.ddr = {
+		/* ESMT M13S128324A-5B memory */
+		.chip_config = 0x003,
+		.refresh = 0x30c,
+		.timing1 = 0x44220e82,
+		.timing2 = 0x08,
+		.tune_lane = 0,
+		.initial_emrs = 0,
+	},
+	.gpio_init.initial_value = 0x3801,
+	.gpio_init.direction = 0x3801,
+	.gpio_i2c_slave_reset = {
+		.active_lo_mask = 0x3801,
+		.msecs_asserted = 10,
+		.msecs_recovery = 40,
+		.ir_reset_mask  = 0x0001,
+	},
+	.i2c = &cx18_i2c_nxp,
+};
+
+static const struct cx18_card cx18_card_hvr1600_samsung = {
+	.type = CX18_CARD_HVR_1600_SAMSUNG,
+	.name = "Hauppauge HVR-1600 (Preproduction)",
+	.comment = "Simultaneous Digital and Analog TV capture supported\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_CS5345,
+	.hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL |
+		  CX18_HW_Z8F0811_IR_HAUP,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE7 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1, CX18_AV_SVIDEO1    },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+		{ CX18_CARD_INPUT_SVIDEO2,    2, CX18_AV_SVIDEO2    },
+		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER,
+		  CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+		{ CX18_CARD_INPUT_LINE_IN1,
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
+		{ CX18_CARD_INPUT_LINE_IN2,
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
+	},
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
+			 CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
+	.ddr = {
+		/* Samsung K4D263238G-VC33 memory */
+		.chip_config = 0x003,
+		.refresh = 0x30c,
+		.timing1 = 0x23230b73,
+		.timing2 = 0x08,
+		.tune_lane = 0,
+		.initial_emrs = 2,
+	},
+	.gpio_init.initial_value = 0x3001,
+	.gpio_init.direction = 0x3001,
+	.gpio_i2c_slave_reset = {
+		.active_lo_mask = 0x3001,
+		.msecs_asserted = 10,
+		.msecs_recovery = 40,
+		.ir_reset_mask  = 0x0001,
+	},
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* Compro VideoMate H900: note that this card is analog only! */
+
+static const struct cx18_card_pci_info cx18_pci_h900[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 },
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_h900 = {
+	.type = CX18_CARD_COMPRO_H900,
+	.name = "Compro VideoMate H900",
+	.comment = "Analog TV capture supported\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+			CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER,
+		  CX18_AV_AUDIO5, 0 },
+		{ CX18_CARD_INPUT_LINE_IN1,
+		  CX18_AV_AUDIO_SERIAL1, 0 },
+	},
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
+			 CX18_AV_AUDIO_SERIAL1, 0 },
+	.tuners = {
+		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+	},
+	.ddr = {
+		/* EtronTech EM6A9160TS-5G memory */
+		.chip_config = 0x50003,
+		.refresh = 0x753,
+		.timing1 = 0x24330e84,
+		.timing2 = 0x1f,
+		.tune_lane = 0,
+		.initial_emrs = 0,
+	},
+	.xceive_pin = 15,
+	.pci_list = cx18_pci_h900,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* Yuan MPC718: not working at the moment! */
+
+static const struct cx18_card_pci_info cx18_pci_mpc718[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_YUAN, 0x0718 },
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_mpc718 = {
+	.type = CX18_CARD_YUAN_MPC718,
+	.name = "Yuan MPC718 MiniPCI DVB-T/Analog",
+	.comment = "Experimenters needed for device to work well.\n"
+		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+				CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+		{ CX18_CARD_INPUT_SVIDEO2,    2,
+				CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
+		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
+	},
+	.tuners = {
+		/* XC3028 tuner */
+		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+	},
+	/* FIXME - the FM radio is just a guess and driver doesn't use SIF */
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
+	.ddr = {
+		/* Hynix HY5DU283222B DDR RAM */
+		.chip_config = 0x303,
+		.refresh = 0x3bd,
+		.timing1 = 0x36320966,
+		.timing2 = 0x1f,
+		.tune_lane = 0,
+		.initial_emrs = 2,
+	},
+	.gpio_init.initial_value = 0x1,
+	.gpio_init.direction = 0x3,
+	/* FIXME - these GPIO's are just guesses */
+	.gpio_audio_input = { .mask   = 0x3,
+			      .tuner  = 0x1,
+			      .linein = 0x3,
+			      .radio  = 0x1 },
+	.xceive_pin = 0,
+	.pci_list = cx18_pci_mpc718,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* GoTView PCI */
+
+static const struct cx18_card_pci_info cx18_pci_gotview_dvd3[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_GOTVIEW, 0x3343 },
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_gotview_dvd3 = {
+	.type = CX18_CARD_GOTVIEW_PCI_DVD3,
+	.name = "GoTView PCI DVD3 Hybrid",
+	.comment = "Experimenters needed for device to work well.\n"
+		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+				CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+		{ CX18_CARD_INPUT_SVIDEO2,    2,
+				CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
+		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
+	},
+	.tuners = {
+		/* XC3028 tuner */
+		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+	},
+	/* FIXME - the FM radio is just a guess and driver doesn't use SIF */
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
+	.ddr = {
+		/* Hynix HY5DU283222B DDR RAM */
+		.chip_config = 0x303,
+		.refresh = 0x3bd,
+		.timing1 = 0x36320966,
+		.timing2 = 0x1f,
+		.tune_lane = 0,
+		.initial_emrs = 2,
+	},
+	.gpio_init.initial_value = 0x1,
+	.gpio_init.direction = 0x3,
+
+	.gpio_audio_input = { .mask   = 0x3,
+			      .tuner  = 0x1,
+			      .linein = 0x2,
+			      .radio  = 0x1 },
+	.xceive_pin = 0,
+	.pci_list = cx18_pci_gotview_dvd3,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* Conexant Raptor PAL/SECAM: note that this card is analog only! */
+
+static const struct cx18_card_pci_info cx18_pci_cnxt_raptor_pal[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_CONEXANT, 0x0009 },
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_cnxt_raptor_pal = {
+	.type = CX18_CARD_CNXT_RAPTOR_PAL,
+	.name = "Conexant Raptor PAL/SECAM",
+	.comment = "Analog TV capture supported\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+			CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+		{ CX18_CARD_INPUT_SVIDEO2,    2,
+			CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
+		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,	    0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
+	},
+	.tuners = {
+		{ .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 },
+	},
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 2 },
+	.ddr = {
+		/* MT 46V16M16 memory */
+		.chip_config = 0x50306,
+		.refresh = 0x753,
+		.timing1 = 0x33220953,
+		.timing2 = 0x09,
+		.tune_lane = 0,
+		.initial_emrs = 0,
+	},
+	.gpio_init.initial_value = 0x1002,
+	.gpio_init.direction = 0xf002,
+	.gpio_audio_input = { .mask   = 0xf002,
+			      .tuner  = 0x1002,   /* LED D1  Tuner AF  */
+			      .linein = 0x2000,   /* LED D2  Line In 1 */
+			      .radio  = 0x4002 }, /* LED D3  Tuner AF  */
+	.pci_list = cx18_pci_cnxt_raptor_pal,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* Toshiba Qosmio laptop internal DVB-T/Analog Hybrid Tuner */
+
+static const struct cx18_card_pci_info cx18_pci_toshiba_qosmio_dvbt[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_TOSHIBA, 0x0110 },
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = {
+	.type = CX18_CARD_TOSHIBA_QOSMIO_DVBT,
+	.name = "Toshiba Qosmio DVB-T/Analog",
+	.comment = "Experimenters and photos needed for device to work well.\n"
+		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE6 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+			CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,	    0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+	},
+	.tuners = {
+		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+	},
+	.ddr = {
+		.chip_config = 0x202,
+		.refresh = 0x3bb,
+		.timing1 = 0x33320a63,
+		.timing2 = 0x0a,
+		.tune_lane = 0,
+		.initial_emrs = 0x42,
+	},
+	.xceive_pin = 15,
+	.pci_list = cx18_pci_toshiba_qosmio_dvbt,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* Leadtek WinFast PVR2100 */
+
+static const struct cx18_card_pci_info cx18_pci_leadtek_pvr2100[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6f27 }, /* PVR2100   */
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_leadtek_pvr2100 = {
+	.type = CX18_CARD_LEADTEK_PVR2100,
+	.name = "Leadtek WinFast PVR2100",
+	.comment = "Experimenters and photos needed for device to work well.\n"
+		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX |
+		  CX18_HW_GPIO_RESET_CTRL,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+			CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 },
+		{ CX18_CARD_INPUT_COMPONENT1, 1, CX18_AV_COMPONENT1 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,	    0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+	},
+	.tuners = {
+		/* XC2028 tuner */
+		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+	},
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
+	.ddr = {
+		/* Pointer to proper DDR config values provided by Terry Wu */
+		.chip_config = 0x303,
+		.refresh = 0x3bb,
+		.timing1 = 0x24220e83,
+		.timing2 = 0x1f,
+		.tune_lane = 0,
+		.initial_emrs = 0x2,
+	},
+	.gpio_init.initial_value = 0x6,
+	.gpio_init.direction = 0x7,
+	.gpio_audio_input = { .mask   = 0x7,
+			      .tuner  = 0x6, .linein = 0x2, .radio  = 0x2 },
+	.xceive_pin = 1,
+	.pci_list = cx18_pci_leadtek_pvr2100,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* Leadtek WinFast DVR3100 H */
+
+static const struct cx18_card_pci_info cx18_pci_leadtek_dvr3100h[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_leadtek_dvr3100h = {
+	.type = CX18_CARD_LEADTEK_DVR3100H,
+	.name = "Leadtek WinFast DVR3100 H",
+	.comment = "Simultaneous DVB-T and Analog capture supported,\n"
+		  "\texcept when capturing Analog from the antenna input.\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX |
+		  CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+			CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 },
+		{ CX18_CARD_INPUT_COMPONENT1, 1, CX18_AV_COMPONENT1 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,	    0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+	},
+	.tuners = {
+		/* XC3028 tuner */
+		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+	},
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
+	.ddr = {
+		/* Pointer to proper DDR config values provided by Terry Wu */
+		.chip_config = 0x303,
+		.refresh = 0x3bb,
+		.timing1 = 0x24220e83,
+		.timing2 = 0x1f,
+		.tune_lane = 0,
+		.initial_emrs = 0x2,
+	},
+	.gpio_init.initial_value = 0x6,
+	.gpio_init.direction = 0x7,
+	.gpio_audio_input = { .mask   = 0x7,
+			      .tuner  = 0x6, .linein = 0x2, .radio  = 0x2 },
+	.xceive_pin = 1,
+	.pci_list = cx18_pci_leadtek_dvr3100h,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
+static const struct cx18_card *cx18_card_list[] = {
+	&cx18_card_hvr1600_esmt,
+	&cx18_card_hvr1600_samsung,
+	&cx18_card_h900,
+	&cx18_card_mpc718,
+	&cx18_card_cnxt_raptor_pal,
+	&cx18_card_toshiba_qosmio_dvbt,
+	&cx18_card_leadtek_pvr2100,
+	&cx18_card_leadtek_dvr3100h,
+	&cx18_card_gotview_dvd3,
+	&cx18_card_hvr1600_s5h1411
+};
+
+const struct cx18_card *cx18_get_card(u16 index)
+{
+	if (index >= ARRAY_SIZE(cx18_card_list))
+		return NULL;
+	return cx18_card_list[index];
+}
+
+int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input)
+{
+	const struct cx18_card_video_input *card_input =
+		cx->card->video_inputs + index;
+	static const char * const input_strs[] = {
+		"Tuner 1",
+		"S-Video 1",
+		"S-Video 2",
+		"Composite 1",
+		"Composite 2",
+		"Component 1"
+	};
+
+	if (index >= cx->nof_inputs)
+		return -EINVAL;
+	input->index = index;
+	strlcpy(input->name, input_strs[card_input->video_type - 1],
+			sizeof(input->name));
+	input->type = (card_input->video_type == CX18_CARD_INPUT_VID_TUNER ?
+			V4L2_INPUT_TYPE_TUNER : V4L2_INPUT_TYPE_CAMERA);
+	input->audioset = (1 << cx->nof_audio_inputs) - 1;
+	input->std = (input->type == V4L2_INPUT_TYPE_TUNER) ?
+				cx->tuner_std : V4L2_STD_ALL;
+	return 0;
+}
+
+int cx18_get_audio_input(struct cx18 *cx, u16 index, struct v4l2_audio *audio)
+{
+	const struct cx18_card_audio_input *aud_input =
+		cx->card->audio_inputs + index;
+	static const char * const input_strs[] = {
+		"Tuner 1",
+		"Line In 1",
+		"Line In 2"
+	};
+
+	memset(audio, 0, sizeof(*audio));
+	if (index >= cx->nof_audio_inputs)
+		return -EINVAL;
+	strlcpy(audio->name, input_strs[aud_input->audio_type - 1],
+			sizeof(audio->name));
+	audio->index = index;
+	audio->capability = V4L2_AUDCAP_STEREO;
+	return 0;
+}
diff --git a/drivers/media/pci/cx18/cx18-cards.h b/drivers/media/pci/cx18/cx18-cards.h
new file mode 100644
index 000000000..02d0fb703
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-cards.h
@@ -0,0 +1,148 @@
+/*
+ *  cx18 functions to query card hardware
+ *
+ *  Derived from ivtv-cards.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+/* hardware flags */
+#define CX18_HW_TUNER			(1 << 0)
+#define CX18_HW_TVEEPROM		(1 << 1)
+#define CX18_HW_CS5345			(1 << 2)
+#define CX18_HW_DVB			(1 << 3)
+#define CX18_HW_418_AV			(1 << 4)
+#define CX18_HW_GPIO_MUX		(1 << 5)
+#define CX18_HW_GPIO_RESET_CTRL		(1 << 6)
+#define CX18_HW_Z8F0811_IR_HAUP		(1 << 7)
+
+/* video inputs */
+#define	CX18_CARD_INPUT_VID_TUNER	1
+#define	CX18_CARD_INPUT_SVIDEO1		2
+#define	CX18_CARD_INPUT_SVIDEO2		3
+#define	CX18_CARD_INPUT_COMPOSITE1	4
+#define	CX18_CARD_INPUT_COMPOSITE2	5
+#define	CX18_CARD_INPUT_COMPONENT1	6
+
+/* audio inputs */
+#define	CX18_CARD_INPUT_AUD_TUNER	1
+#define	CX18_CARD_INPUT_LINE_IN1	2
+#define	CX18_CARD_INPUT_LINE_IN2	3
+
+#define CX18_CARD_MAX_VIDEO_INPUTS 6
+#define CX18_CARD_MAX_AUDIO_INPUTS 3
+#define CX18_CARD_MAX_TUNERS	   2
+
+/* V4L2 capability aliases */
+#define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \
+			  V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | \
+			  V4L2_CAP_STREAMING | V4L2_CAP_VBI_CAPTURE | \
+			  V4L2_CAP_SLICED_VBI_CAPTURE)
+
+struct cx18_card_video_input {
+	u8  video_type;		/* video input type */
+	u8  audio_index;	/* index in cx18_card_audio_input array */
+	u32 video_input;	/* hardware video input */
+};
+
+struct cx18_card_audio_input {
+	u8  audio_type;		/* audio input type */
+	u32 audio_input;	/* hardware audio input */
+	u16 muxer_input;	/* hardware muxer input for boards with a
+				   multiplexer chip */
+};
+
+struct cx18_card_pci_info {
+	u16 device;
+	u16 subsystem_vendor;
+	u16 subsystem_device;
+};
+
+/* GPIO definitions */
+
+/* The mask is the set of bits used by the operation */
+
+struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */
+	u32 direction;	/* DIR setting. Leave to 0 if no init is needed */
+	u32 initial_value;
+};
+
+struct cx18_gpio_i2c_slave_reset {
+	u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */
+	u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */
+	int msecs_asserted; /* time period reset must remain asserted */
+	int msecs_recovery; /* time after deassert for chips to be ready */
+	u32 ir_reset_mask;  /* GPIO to reset the Zilog Z8F0811 IR contoller */
+};
+
+struct cx18_gpio_audio_input {	/* select tuner/line in input */
+	u32 mask;		/* leave to 0 if not supported */
+	u32 tuner;
+	u32 linein;
+	u32 radio;
+};
+
+struct cx18_card_tuner {
+	v4l2_std_id std;	/* standard for which the tuner is suitable */
+	int	    tuner;	/* tuner ID (from tuner.h) */
+};
+
+struct cx18_card_tuner_i2c {
+	unsigned short radio[2];/* radio tuner i2c address to probe */
+	unsigned short demod[3];/* demodulator i2c address to probe */
+	unsigned short tv[4];	/* tv tuner i2c addresses to probe */
+};
+
+struct cx18_ddr {		/* DDR config data */
+	u32 chip_config;
+	u32 refresh;
+	u32 timing1;
+	u32 timing2;
+	u32 tune_lane;
+	u32 initial_emrs;
+};
+
+/* for card information/parameters */
+struct cx18_card {
+	int type;
+	char *name;
+	char *comment;
+	u32 v4l2_capabilities;
+	u32 hw_audio_ctrl;	/* hardware used for the V4L2 controls (only
+				   1 dev allowed currently) */
+	u32 hw_muxer;		/* hardware used to multiplex audio input */
+	u32 hw_all;		/* all hardware used by the board */
+	struct cx18_card_video_input video_inputs[CX18_CARD_MAX_VIDEO_INPUTS];
+	struct cx18_card_audio_input audio_inputs[CX18_CARD_MAX_AUDIO_INPUTS];
+	struct cx18_card_audio_input radio_input;
+
+	/* GPIO card-specific settings */
+	u8 xceive_pin;		/* XCeive tuner GPIO reset pin */
+	struct cx18_gpio_init		 gpio_init;
+	struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset;
+	struct cx18_gpio_audio_input    gpio_audio_input;
+
+	struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS];
+	struct cx18_card_tuner_i2c *i2c;
+
+	struct cx18_ddr ddr;
+
+	/* list of device and subsystem vendor/devices that
+	   correspond to this card type. */
+	const struct cx18_card_pci_info *pci_list;
+};
+
+int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input);
+int cx18_get_audio_input(struct cx18 *cx, u16 index, struct v4l2_audio *input);
+const struct cx18_card *cx18_get_card(u16 index);
diff --git a/drivers/media/pci/cx18/cx18-controls.c b/drivers/media/pci/cx18/cx18-controls.c
new file mode 100644
index 000000000..f02df985d
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-controls.c
@@ -0,0 +1,126 @@
+/*
+ *  cx18 ioctl control functions
+ *
+ *  Derived from ivtv-controls.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include "cx18-driver.h"
+#include "cx18-cards.h"
+#include "cx18-ioctl.h"
+#include "cx18-audio.h"
+#include "cx18-mailbox.h"
+#include "cx18-controls.h"
+
+static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt)
+{
+	struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl);
+	int type = cxhdl->stream_type->val;
+
+	if (atomic_read(&cx->ana_capturing) > 0)
+		return -EBUSY;
+
+	if (fmt != V4L2_MPEG_STREAM_VBI_FMT_IVTV ||
+	    !(type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS ||
+	      type == V4L2_MPEG_STREAM_TYPE_MPEG2_DVD ||
+	      type == V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD)) {
+		/* Only IVTV fmt VBI insertion & only MPEG-2 PS type streams */
+		cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE;
+		CX18_DEBUG_INFO("disabled insertion of sliced VBI data into the MPEG stream\n");
+		return 0;
+	}
+
+	/* Allocate sliced VBI buffers if needed. */
+	if (cx->vbi.sliced_mpeg_data[0] == NULL) {
+		int i;
+
+		for (i = 0; i < CX18_VBI_FRAMES; i++) {
+			cx->vbi.sliced_mpeg_data[i] =
+			       kmalloc(CX18_SLICED_MPEG_DATA_BUFSZ, GFP_KERNEL);
+			if (cx->vbi.sliced_mpeg_data[i] == NULL) {
+				while (--i >= 0) {
+					kfree(cx->vbi.sliced_mpeg_data[i]);
+					cx->vbi.sliced_mpeg_data[i] = NULL;
+				}
+				cx->vbi.insert_mpeg =
+						  V4L2_MPEG_STREAM_VBI_FMT_NONE;
+				CX18_WARN("Unable to allocate buffers for sliced VBI data insertion\n");
+				return -ENOMEM;
+			}
+		}
+	}
+
+	cx->vbi.insert_mpeg = fmt;
+	CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS,when sliced VBI is enabled\n");
+
+	/*
+	 * If our current settings have no lines set for capture, store a valid,
+	 * default set of service lines to capture, in our current settings.
+	 */
+	if (cx18_get_service_set(cx->vbi.sliced_in) == 0) {
+		if (cx->is_60hz)
+			cx->vbi.sliced_in->service_set =
+							V4L2_SLICED_CAPTION_525;
+		else
+			cx->vbi.sliced_in->service_set = V4L2_SLICED_WSS_625;
+		cx18_expand_service_set(cx->vbi.sliced_in, cx->is_50hz);
+	}
+	return 0;
+}
+
+static int cx18_s_video_encoding(struct cx2341x_handler *cxhdl, u32 val)
+{
+	struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl);
+	int is_mpeg1 = val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
+	struct v4l2_subdev_format format = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
+	struct v4l2_mbus_framefmt *fmt = &format.format;
+
+	/* fix videodecoder resolution */
+	fmt->width = cxhdl->width / (is_mpeg1 ? 2 : 1);
+	fmt->height = cxhdl->height;
+	fmt->code = MEDIA_BUS_FMT_FIXED;
+	v4l2_subdev_call(cx->sd_av, pad, set_fmt, NULL, &format);
+	return 0;
+}
+
+static int cx18_s_audio_sampling_freq(struct cx2341x_handler *cxhdl, u32 idx)
+{
+	static const u32 freqs[3] = { 44100, 48000, 32000 };
+	struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl);
+
+	/* The audio clock of the digitizer must match the codec sample
+	   rate otherwise you get some very strange effects. */
+	if (idx < ARRAY_SIZE(freqs))
+		cx18_call_all(cx, audio, s_clock_freq, freqs[idx]);
+	return 0;
+}
+
+static int cx18_s_audio_mode(struct cx2341x_handler *cxhdl, u32 val)
+{
+	struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl);
+
+	cx->dualwatch_stereo_mode = val;
+	return 0;
+}
+
+const struct cx2341x_handler_ops cx18_cxhdl_ops = {
+	.s_audio_mode = cx18_s_audio_mode,
+	.s_audio_sampling_freq = cx18_s_audio_sampling_freq,
+	.s_video_encoding = cx18_s_video_encoding,
+	.s_stream_vbi_fmt = cx18_s_stream_vbi_fmt,
+};
diff --git a/drivers/media/pci/cx18/cx18-controls.h b/drivers/media/pci/cx18/cx18-controls.h
new file mode 100644
index 000000000..326794887
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-controls.h
@@ -0,0 +1,24 @@
+/*
+ *  cx18 ioctl control functions
+ *
+ *  Derived from ivtv-controls.h
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ *  02111-1307  USA
+ */
+
+extern const struct cx2341x_handler_ops cx18_cxhdl_ops;
diff --git a/drivers/media/pci/cx18/cx18-driver.c b/drivers/media/pci/cx18/cx18-driver.c
new file mode 100644
index 000000000..e64f9093c
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-driver.c
@@ -0,0 +1,1353 @@
+/*
+ *  cx18 driver initialization and card probing
+ *
+ *  Derived from ivtv-driver.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-version.h"
+#include "cx18-cards.h"
+#include "cx18-i2c.h"
+#include "cx18-irq.h"
+#include "cx18-gpio.h"
+#include "cx18-firmware.h"
+#include "cx18-queue.h"
+#include "cx18-streams.h"
+#include "cx18-av-core.h"
+#include "cx18-scb.h"
+#include "cx18-mailbox.h"
+#include "cx18-ioctl.h"
+#include "cx18-controls.h"
+#include "tuner-xc2028.h"
+#include <linux/dma-mapping.h>
+#include <media/tveeprom.h>
+
+/* If you have already X v4l cards, then set this to X. This way
+   the device numbers stay matched. Example: you have a WinTV card
+   without radio and a Compro H900 with. Normally this would give a
+   video1 device together with a radio0 device for the Compro. By
+   setting this to 1 you ensure that radio0 is now also radio1. */
+int cx18_first_minor;
+
+/* Callback for registering extensions */
+int (*cx18_ext_init)(struct cx18 *);
+EXPORT_SYMBOL(cx18_ext_init);
+
+/* add your revision and whatnot here */
+static const struct pci_device_id cx18_pci_tbl[] = {
+	{PCI_VENDOR_ID_CX, PCI_DEVICE_ID_CX23418,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, cx18_pci_tbl);
+
+static atomic_t cx18_instance = ATOMIC_INIT(0);
+
+/* Parameter declarations */
+static int cardtype[CX18_MAX_CARDS];
+static int tuner[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
+				     -1, -1, -1, -1, -1, -1, -1, -1,
+				     -1, -1, -1, -1, -1, -1, -1, -1,
+				     -1, -1, -1, -1, -1, -1, -1, -1 };
+static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
+				     -1, -1, -1, -1, -1, -1, -1, -1,
+				     -1, -1, -1, -1, -1, -1, -1, -1,
+				     -1, -1, -1, -1, -1, -1, -1, -1 };
+static unsigned cardtype_c = 1;
+static unsigned tuner_c = 1;
+static unsigned radio_c = 1;
+static char pal[] = "--";
+static char secam[] = "--";
+static char ntsc[] = "-";
+
+/* Buffers */
+static int enc_ts_buffers = CX18_DEFAULT_ENC_TS_BUFFERS;
+static int enc_mpg_buffers = CX18_DEFAULT_ENC_MPG_BUFFERS;
+static int enc_idx_buffers = CX18_DEFAULT_ENC_IDX_BUFFERS;
+static int enc_yuv_buffers = CX18_DEFAULT_ENC_YUV_BUFFERS;
+static int enc_vbi_buffers = CX18_DEFAULT_ENC_VBI_BUFFERS;
+static int enc_pcm_buffers = CX18_DEFAULT_ENC_PCM_BUFFERS;
+
+static int enc_ts_bufsize = CX18_DEFAULT_ENC_TS_BUFSIZE;
+static int enc_mpg_bufsize = CX18_DEFAULT_ENC_MPG_BUFSIZE;
+static int enc_idx_bufsize = CX18_DEFAULT_ENC_IDX_BUFSIZE;
+static int enc_yuv_bufsize = CX18_DEFAULT_ENC_YUV_BUFSIZE;
+static int enc_pcm_bufsize = CX18_DEFAULT_ENC_PCM_BUFSIZE;
+
+static int enc_ts_bufs = -1;
+static int enc_mpg_bufs = -1;
+static int enc_idx_bufs = CX18_MAX_FW_MDLS_PER_STREAM;
+static int enc_yuv_bufs = -1;
+static int enc_vbi_bufs = -1;
+static int enc_pcm_bufs = -1;
+
+
+static int cx18_pci_latency = 1;
+
+static int mmio_ndelay;
+static int retry_mmio = 1;
+
+int cx18_debug;
+
+module_param_array(tuner, int, &tuner_c, 0644);
+module_param_array(radio, int, &radio_c, 0644);
+module_param_array(cardtype, int, &cardtype_c, 0644);
+module_param_string(pal, pal, sizeof(pal), 0644);
+module_param_string(secam, secam, sizeof(secam), 0644);
+module_param_string(ntsc, ntsc, sizeof(ntsc), 0644);
+module_param_named(debug, cx18_debug, int, 0644);
+module_param(mmio_ndelay, int, 0644);
+module_param(retry_mmio, int, 0644);
+module_param(cx18_pci_latency, int, 0644);
+module_param(cx18_first_minor, int, 0644);
+
+module_param(enc_ts_buffers, int, 0644);
+module_param(enc_mpg_buffers, int, 0644);
+module_param(enc_idx_buffers, int, 0644);
+module_param(enc_yuv_buffers, int, 0644);
+module_param(enc_vbi_buffers, int, 0644);
+module_param(enc_pcm_buffers, int, 0644);
+
+module_param(enc_ts_bufsize, int, 0644);
+module_param(enc_mpg_bufsize, int, 0644);
+module_param(enc_idx_bufsize, int, 0644);
+module_param(enc_yuv_bufsize, int, 0644);
+module_param(enc_pcm_bufsize, int, 0644);
+
+module_param(enc_ts_bufs, int, 0644);
+module_param(enc_mpg_bufs, int, 0644);
+module_param(enc_idx_bufs, int, 0644);
+module_param(enc_yuv_bufs, int, 0644);
+module_param(enc_vbi_bufs, int, 0644);
+module_param(enc_pcm_bufs, int, 0644);
+
+MODULE_PARM_DESC(tuner, "Tuner type selection,\n"
+			"\t\t\tsee tuner.h for values");
+MODULE_PARM_DESC(radio,
+		 "Enable or disable the radio. Use only if autodetection\n"
+		 "\t\t\tfails. 0 = disable, 1 = enable");
+MODULE_PARM_DESC(cardtype,
+		 "Only use this option if your card is not detected properly.\n"
+		 "\t\tSpecify card type:\n"
+		 "\t\t\t 1 = Hauppauge HVR 1600 (ESMT memory)\n"
+		 "\t\t\t 2 = Hauppauge HVR 1600 (Samsung memory)\n"
+		 "\t\t\t 3 = Compro VideoMate H900\n"
+		 "\t\t\t 4 = Yuan MPC718\n"
+		 "\t\t\t 5 = Conexant Raptor PAL/SECAM\n"
+		 "\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n"
+		 "\t\t\t 7 = Leadtek WinFast PVR2100\n"
+		 "\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
+		 "\t\t\t 9 = GoTView PCI DVD3 Hybrid\n"
+		 "\t\t\t 10 = Hauppauge HVR 1600 (S5H1411)\n"
+		 "\t\t\t 0 = Autodetect (default)\n"
+		 "\t\t\t-1 = Ignore this card\n\t\t");
+MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
+MODULE_PARM_DESC(secam, "Set SECAM standard: B, G, H, D, K, L, LC");
+MODULE_PARM_DESC(ntsc, "Set NTSC standard: M, J, K");
+MODULE_PARM_DESC(debug,
+		 "Debug level (bitmask). Default: 0\n"
+		 "\t\t\t  1/0x0001: warning\n"
+		 "\t\t\t  2/0x0002: info\n"
+		 "\t\t\t  4/0x0004: mailbox\n"
+		 "\t\t\t  8/0x0008: dma\n"
+		 "\t\t\t 16/0x0010: ioctl\n"
+		 "\t\t\t 32/0x0020: file\n"
+		 "\t\t\t 64/0x0040: i2c\n"
+		 "\t\t\t128/0x0080: irq\n"
+		 "\t\t\t256/0x0100: high volume\n");
+MODULE_PARM_DESC(cx18_pci_latency,
+		 "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
+		 "\t\t\tDefault: Yes");
+MODULE_PARM_DESC(retry_mmio,
+		 "(Deprecated) MMIO writes are now always checked and retried\n"
+		 "\t\t\tEffectively: 1 [Yes]");
+MODULE_PARM_DESC(mmio_ndelay,
+		 "(Deprecated) MMIO accesses are now never purposely delayed\n"
+		 "\t\t\tEffectively: 0 ns");
+MODULE_PARM_DESC(enc_ts_buffers,
+		 "Encoder TS buffer memory (MB). (enc_ts_bufs can override)\n"
+		 "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_TS_BUFFERS));
+MODULE_PARM_DESC(enc_ts_bufsize,
+		 "Size of an encoder TS buffer (kB)\n"
+		 "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_TS_BUFSIZE));
+MODULE_PARM_DESC(enc_ts_bufs,
+		 "Number of encoder TS buffers\n"
+		 "\t\t\tDefault is computed from other enc_ts_* parameters");
+MODULE_PARM_DESC(enc_mpg_buffers,
+		 "Encoder MPG buffer memory (MB). (enc_mpg_bufs can override)\n"
+		 "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_MPG_BUFFERS));
+MODULE_PARM_DESC(enc_mpg_bufsize,
+		 "Size of an encoder MPG buffer (kB)\n"
+		 "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_MPG_BUFSIZE));
+MODULE_PARM_DESC(enc_mpg_bufs,
+		 "Number of encoder MPG buffers\n"
+		 "\t\t\tDefault is computed from other enc_mpg_* parameters");
+MODULE_PARM_DESC(enc_idx_buffers,
+		 "(Deprecated) Encoder IDX buffer memory (MB)\n"
+		 "\t\t\tIgnored, except 0 disables IDX buffer allocations\n"
+		 "\t\t\tDefault: 1 [Enabled]");
+MODULE_PARM_DESC(enc_idx_bufsize,
+		 "Size of an encoder IDX buffer (kB)\n"
+		 "\t\t\tAllowed values are multiples of 1.5 kB rounded up\n"
+		 "\t\t\t(multiples of size required for 64 index entries)\n"
+		 "\t\t\tDefault: 2");
+MODULE_PARM_DESC(enc_idx_bufs,
+		 "Number of encoder IDX buffers\n"
+		 "\t\t\tDefault: " __stringify(CX18_MAX_FW_MDLS_PER_STREAM));
+MODULE_PARM_DESC(enc_yuv_buffers,
+		 "Encoder YUV buffer memory (MB). (enc_yuv_bufs can override)\n"
+		 "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_YUV_BUFFERS));
+MODULE_PARM_DESC(enc_yuv_bufsize,
+		 "Size of an encoder YUV buffer (kB)\n"
+		 "\t\t\tAllowed values are multiples of 33.75 kB rounded up\n"
+		 "\t\t\t(multiples of size required for 32 screen lines)\n"
+		 "\t\t\tDefault: 102");
+MODULE_PARM_DESC(enc_yuv_bufs,
+		 "Number of encoder YUV buffers\n"
+		 "\t\t\tDefault is computed from other enc_yuv_* parameters");
+MODULE_PARM_DESC(enc_vbi_buffers,
+		 "Encoder VBI buffer memory (MB). (enc_vbi_bufs can override)\n"
+		 "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_VBI_BUFFERS));
+MODULE_PARM_DESC(enc_vbi_bufs,
+		 "Number of encoder VBI buffers\n"
+		 "\t\t\tDefault is computed from enc_vbi_buffers");
+MODULE_PARM_DESC(enc_pcm_buffers,
+		 "Encoder PCM buffer memory (MB). (enc_pcm_bufs can override)\n"
+		 "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_PCM_BUFFERS));
+MODULE_PARM_DESC(enc_pcm_bufsize,
+		 "Size of an encoder PCM buffer (kB)\n"
+		 "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_PCM_BUFSIZE));
+MODULE_PARM_DESC(enc_pcm_bufs,
+		 "Number of encoder PCM buffers\n"
+		 "\t\t\tDefault is computed from other enc_pcm_* parameters");
+
+MODULE_PARM_DESC(cx18_first_minor,
+		 "Set device node number assigned to first card");
+
+MODULE_AUTHOR("Hans Verkuil");
+MODULE_DESCRIPTION("CX23418 driver");
+MODULE_SUPPORTED_DEVICE("CX23418 MPEG2 encoder");
+MODULE_LICENSE("GPL");
+
+MODULE_VERSION(CX18_VERSION);
+
+#if defined(CONFIG_MODULES) && defined(MODULE)
+static void request_module_async(struct work_struct *work)
+{
+	struct cx18 *dev = container_of(work, struct cx18, request_module_wk);
+
+	/* Make sure cx18-alsa module is loaded */
+	request_module("cx18-alsa");
+
+	/* Initialize cx18-alsa for this instance of the cx18 device */
+	if (cx18_ext_init)
+		cx18_ext_init(dev);
+}
+
+static void request_modules(struct cx18 *dev)
+{
+	INIT_WORK(&dev->request_module_wk, request_module_async);
+	schedule_work(&dev->request_module_wk);
+}
+
+static void flush_request_modules(struct cx18 *dev)
+{
+	flush_work(&dev->request_module_wk);
+}
+#else
+#define request_modules(dev)
+#define flush_request_modules(dev)
+#endif /* CONFIG_MODULES */
+
+/* Generic utility functions */
+int cx18_msleep_timeout(unsigned int msecs, int intr)
+{
+	long int timeout = msecs_to_jiffies(msecs);
+	int sig;
+
+	do {
+		set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
+		timeout = schedule_timeout(timeout);
+		sig = intr ? signal_pending(current) : 0;
+	} while (!sig && timeout);
+	return sig;
+}
+
+/* Release ioremapped memory */
+static void cx18_iounmap(struct cx18 *cx)
+{
+	if (!cx)
+		return;
+
+	/* Release io memory */
+	if (cx->enc_mem) {
+		CX18_DEBUG_INFO("releasing enc_mem\n");
+		iounmap(cx->enc_mem);
+		cx->enc_mem = NULL;
+	}
+}
+
+static void cx18_eeprom_dump(struct cx18 *cx, unsigned char *eedata, int len)
+{
+	int i;
+
+	CX18_INFO("eeprom dump:\n");
+	for (i = 0; i < len; i++) {
+		if (0 == (i % 16))
+			CX18_INFO("eeprom %02x:", i);
+		printk(KERN_CONT " %02x", eedata[i]);
+		if (15 == (i % 16))
+			printk(KERN_CONT "\n");
+	}
+}
+
+/* Hauppauge card? get values from tveeprom */
+void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv)
+{
+	struct i2c_client *c;
+	u8 eedata[256];
+
+	memset(tv, 0, sizeof(*tv));
+
+	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	if (!c)
+		return;
+
+	strlcpy(c->name, "cx18 tveeprom tmp", sizeof(c->name));
+	c->adapter = &cx->i2c_adap[0];
+	c->addr = 0xa0 >> 1;
+
+	if (tveeprom_read(c, eedata, sizeof(eedata)))
+		goto ret;
+
+	switch (cx->card->type) {
+	case CX18_CARD_HVR_1600_ESMT:
+	case CX18_CARD_HVR_1600_SAMSUNG:
+	case CX18_CARD_HVR_1600_S5H1411:
+		tveeprom_hauppauge_analog(tv, eedata);
+		break;
+	case CX18_CARD_YUAN_MPC718:
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
+		tv->model = 0x718;
+		cx18_eeprom_dump(cx, eedata, sizeof(eedata));
+		CX18_INFO("eeprom PCI ID: %02x%02x:%02x%02x\n",
+			  eedata[2], eedata[1], eedata[4], eedata[3]);
+		break;
+	default:
+		tv->model = 0xffffffff;
+		cx18_eeprom_dump(cx, eedata, sizeof(eedata));
+		break;
+	}
+
+ret:
+	kfree(c);
+}
+
+static void cx18_process_eeprom(struct cx18 *cx)
+{
+	struct tveeprom tv;
+
+	cx18_read_eeprom(cx, &tv);
+
+	/* Many thanks to Steven Toth from Hauppauge for providing the
+	   model numbers */
+	/* Note: the Samsung memory models cannot be reliably determined
+	   from the model number. Use the cardtype module option if you
+	   have one of these preproduction models. */
+	switch (tv.model) {
+	case 74301: /* Retail models */
+	case 74321:
+	case 74351: /* OEM models */
+	case 74361:
+		/* Digital side is s5h1411/tda18271 */
+		cx->card = cx18_get_card(CX18_CARD_HVR_1600_S5H1411);
+		break;
+	case 74021: /* Retail models */
+	case 74031:
+	case 74041:
+	case 74141:
+	case 74541: /* OEM models */
+	case 74551:
+	case 74591:
+	case 74651:
+	case 74691:
+	case 74751:
+	case 74891:
+		/* Digital side is s5h1409/mxl5005s */
+		cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
+		break;
+	case 0x718:
+		return;
+	case 0xffffffff:
+		CX18_INFO("Unknown EEPROM encoding\n");
+		return;
+	case 0:
+		CX18_ERR("Invalid EEPROM\n");
+		return;
+	default:
+		CX18_ERR("Unknown model %d, defaulting to original HVR-1600 (cardtype=1)\n",
+			 tv.model);
+		cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
+		break;
+	}
+
+	cx->v4l2_cap = cx->card->v4l2_capabilities;
+	cx->card_name = cx->card->name;
+	cx->card_i2c = cx->card->i2c;
+
+	CX18_INFO("Autodetected %s\n", cx->card_name);
+
+	if (tv.tuner_type == TUNER_ABSENT)
+		CX18_ERR("tveeprom cannot autodetect tuner!\n");
+
+	if (cx->options.tuner == -1)
+		cx->options.tuner = tv.tuner_type;
+	if (cx->options.radio == -1)
+		cx->options.radio = (tv.has_radio != 0);
+
+	if (cx->std != 0)
+		/* user specified tuner standard */
+		return;
+
+	/* autodetect tuner standard */
+#define TVEEPROM_TUNER_FORMAT_ALL (V4L2_STD_B  | V4L2_STD_GH | \
+				   V4L2_STD_MN | \
+				   V4L2_STD_PAL_I | \
+				   V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC | \
+				   V4L2_STD_DK)
+	if ((tv.tuner_formats & TVEEPROM_TUNER_FORMAT_ALL)
+					== TVEEPROM_TUNER_FORMAT_ALL) {
+		CX18_DEBUG_INFO("Worldwide tuner detected\n");
+		cx->std = V4L2_STD_ALL;
+	} else if (tv.tuner_formats & V4L2_STD_PAL) {
+		CX18_DEBUG_INFO("PAL tuner detected\n");
+		cx->std |= V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
+	} else if (tv.tuner_formats & V4L2_STD_NTSC) {
+		CX18_DEBUG_INFO("NTSC tuner detected\n");
+		cx->std |= V4L2_STD_NTSC_M;
+	} else if (tv.tuner_formats & V4L2_STD_SECAM) {
+		CX18_DEBUG_INFO("SECAM tuner detected\n");
+		cx->std |= V4L2_STD_SECAM_L;
+	} else {
+		CX18_INFO("No tuner detected, default to NTSC-M\n");
+		cx->std |= V4L2_STD_NTSC_M;
+	}
+}
+
+static v4l2_std_id cx18_parse_std(struct cx18 *cx)
+{
+	switch (pal[0]) {
+	case '6':
+		return V4L2_STD_PAL_60;
+	case 'b':
+	case 'B':
+	case 'g':
+	case 'G':
+		return V4L2_STD_PAL_BG;
+	case 'h':
+	case 'H':
+		return V4L2_STD_PAL_H;
+	case 'n':
+	case 'N':
+		if (pal[1] == 'c' || pal[1] == 'C')
+			return V4L2_STD_PAL_Nc;
+		return V4L2_STD_PAL_N;
+	case 'i':
+	case 'I':
+		return V4L2_STD_PAL_I;
+	case 'd':
+	case 'D':
+	case 'k':
+	case 'K':
+		return V4L2_STD_PAL_DK;
+	case 'M':
+	case 'm':
+		return V4L2_STD_PAL_M;
+	case '-':
+		break;
+	default:
+		CX18_WARN("pal= argument not recognised\n");
+		return 0;
+	}
+
+	switch (secam[0]) {
+	case 'b':
+	case 'B':
+	case 'g':
+	case 'G':
+	case 'h':
+	case 'H':
+		return V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H;
+	case 'd':
+	case 'D':
+	case 'k':
+	case 'K':
+		return V4L2_STD_SECAM_DK;
+	case 'l':
+	case 'L':
+		if (secam[1] == 'C' || secam[1] == 'c')
+			return V4L2_STD_SECAM_LC;
+		return V4L2_STD_SECAM_L;
+	case '-':
+		break;
+	default:
+		CX18_WARN("secam= argument not recognised\n");
+		return 0;
+	}
+
+	switch (ntsc[0]) {
+	case 'm':
+	case 'M':
+		return V4L2_STD_NTSC_M;
+	case 'j':
+	case 'J':
+		return V4L2_STD_NTSC_M_JP;
+	case 'k':
+	case 'K':
+		return V4L2_STD_NTSC_M_KR;
+	case '-':
+		break;
+	default:
+		CX18_WARN("ntsc= argument not recognised\n");
+		return 0;
+	}
+
+	/* no match found */
+	return 0;
+}
+
+static void cx18_process_options(struct cx18 *cx)
+{
+	int i, j;
+
+	cx->options.megabytes[CX18_ENC_STREAM_TYPE_TS] = enc_ts_buffers;
+	cx->options.megabytes[CX18_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers;
+	cx->options.megabytes[CX18_ENC_STREAM_TYPE_IDX] = enc_idx_buffers;
+	cx->options.megabytes[CX18_ENC_STREAM_TYPE_YUV] = enc_yuv_buffers;
+	cx->options.megabytes[CX18_ENC_STREAM_TYPE_VBI] = enc_vbi_buffers;
+	cx->options.megabytes[CX18_ENC_STREAM_TYPE_PCM] = enc_pcm_buffers;
+	cx->options.megabytes[CX18_ENC_STREAM_TYPE_RAD] = 0; /* control only */
+
+	cx->stream_buffers[CX18_ENC_STREAM_TYPE_TS] = enc_ts_bufs;
+	cx->stream_buffers[CX18_ENC_STREAM_TYPE_MPG] = enc_mpg_bufs;
+	cx->stream_buffers[CX18_ENC_STREAM_TYPE_IDX] = enc_idx_bufs;
+	cx->stream_buffers[CX18_ENC_STREAM_TYPE_YUV] = enc_yuv_bufs;
+	cx->stream_buffers[CX18_ENC_STREAM_TYPE_VBI] = enc_vbi_bufs;
+	cx->stream_buffers[CX18_ENC_STREAM_TYPE_PCM] = enc_pcm_bufs;
+	cx->stream_buffers[CX18_ENC_STREAM_TYPE_RAD] = 0; /* control, no data */
+
+	cx->stream_buf_size[CX18_ENC_STREAM_TYPE_TS] = enc_ts_bufsize;
+	cx->stream_buf_size[CX18_ENC_STREAM_TYPE_MPG] = enc_mpg_bufsize;
+	cx->stream_buf_size[CX18_ENC_STREAM_TYPE_IDX] = enc_idx_bufsize;
+	cx->stream_buf_size[CX18_ENC_STREAM_TYPE_YUV] = enc_yuv_bufsize;
+	cx->stream_buf_size[CX18_ENC_STREAM_TYPE_VBI] = VBI_ACTIVE_SAMPLES * 36;
+	cx->stream_buf_size[CX18_ENC_STREAM_TYPE_PCM] = enc_pcm_bufsize;
+	cx->stream_buf_size[CX18_ENC_STREAM_TYPE_RAD] = 0; /* control no data */
+
+	/* Ensure stream_buffers & stream_buf_size are valid */
+	for (i = 0; i < CX18_MAX_STREAMS; i++) {
+		if (cx->stream_buffers[i] == 0 ||     /* User said 0 buffers */
+		    cx->options.megabytes[i] <= 0 ||  /* User said 0 MB total */
+		    cx->stream_buf_size[i] <= 0) {    /* User said buf size 0 */
+			cx->options.megabytes[i] = 0;
+			cx->stream_buffers[i] = 0;
+			cx->stream_buf_size[i] = 0;
+			continue;
+		}
+		/*
+		 * YUV is a special case where the stream_buf_size needs to be
+		 * an integral multiple of 33.75 kB (storage for 32 screens
+		 * lines to maintain alignment in case of lost buffers).
+		 *
+		 * IDX is a special case where the stream_buf_size should be
+		 * an integral multiple of 1.5 kB (storage for 64 index entries
+		 * to maintain alignment in case of lost buffers).
+		 *
+		 */
+		if (i == CX18_ENC_STREAM_TYPE_YUV) {
+			cx->stream_buf_size[i] *= 1024;
+			cx->stream_buf_size[i] -=
+			   (cx->stream_buf_size[i] % CX18_UNIT_ENC_YUV_BUFSIZE);
+
+			if (cx->stream_buf_size[i] < CX18_UNIT_ENC_YUV_BUFSIZE)
+				cx->stream_buf_size[i] =
+						CX18_UNIT_ENC_YUV_BUFSIZE;
+		} else if (i == CX18_ENC_STREAM_TYPE_IDX) {
+			cx->stream_buf_size[i] *= 1024;
+			cx->stream_buf_size[i] -=
+			   (cx->stream_buf_size[i] % CX18_UNIT_ENC_IDX_BUFSIZE);
+
+			if (cx->stream_buf_size[i] < CX18_UNIT_ENC_IDX_BUFSIZE)
+				cx->stream_buf_size[i] =
+						CX18_UNIT_ENC_IDX_BUFSIZE;
+		}
+		/*
+		 * YUV and IDX are special cases where the stream_buf_size is
+		 * now in bytes.
+		 * VBI is a special case where the stream_buf_size is fixed
+		 * and already in bytes
+		 */
+		if (i == CX18_ENC_STREAM_TYPE_VBI ||
+		    i == CX18_ENC_STREAM_TYPE_YUV ||
+		    i == CX18_ENC_STREAM_TYPE_IDX) {
+			if (cx->stream_buffers[i] < 0) {
+				cx->stream_buffers[i] =
+					cx->options.megabytes[i] * 1024 * 1024
+					/ cx->stream_buf_size[i];
+			} else {
+				/* N.B. This might round down to 0 */
+				cx->options.megabytes[i] =
+					cx->stream_buffers[i]
+					* cx->stream_buf_size[i]/(1024 * 1024);
+			}
+		} else {
+			/* All other streams have stream_buf_size in kB here */
+			if (cx->stream_buffers[i] < 0) {
+				cx->stream_buffers[i] =
+						cx->options.megabytes[i] * 1024
+						/ cx->stream_buf_size[i];
+			} else {
+				/* N.B. This might round down to 0 */
+				cx->options.megabytes[i] =
+						cx->stream_buffers[i]
+						* cx->stream_buf_size[i] / 1024;
+			}
+			/* convert from kB to bytes */
+			cx->stream_buf_size[i] *= 1024;
+		}
+		CX18_DEBUG_INFO("Stream type %d options: %d MB, %d buffers, %d bytes\n",
+				i, cx->options.megabytes[i],
+				cx->stream_buffers[i], cx->stream_buf_size[i]);
+	}
+
+	cx->options.cardtype = cardtype[cx->instance];
+	cx->options.tuner = tuner[cx->instance];
+	cx->options.radio = radio[cx->instance];
+
+	cx->std = cx18_parse_std(cx);
+	if (cx->options.cardtype == -1) {
+		CX18_INFO("Ignore card\n");
+		return;
+	}
+	cx->card = cx18_get_card(cx->options.cardtype - 1);
+	if (cx->card)
+		CX18_INFO("User specified %s card\n", cx->card->name);
+	else if (cx->options.cardtype != 0)
+		CX18_ERR("Unknown user specified type, trying to autodetect card\n");
+	if (!cx->card) {
+		if (cx->pci_dev->subsystem_vendor == CX18_PCI_ID_HAUPPAUGE) {
+			cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
+			CX18_INFO("Autodetected Hauppauge card\n");
+		}
+	}
+	if (!cx->card) {
+		for (i = 0; (cx->card = cx18_get_card(i)); i++) {
+			if (!cx->card->pci_list)
+				continue;
+			for (j = 0; cx->card->pci_list[j].device; j++) {
+				if (cx->pci_dev->device !=
+				    cx->card->pci_list[j].device)
+					continue;
+				if (cx->pci_dev->subsystem_vendor !=
+				    cx->card->pci_list[j].subsystem_vendor)
+					continue;
+				if (cx->pci_dev->subsystem_device !=
+				    cx->card->pci_list[j].subsystem_device)
+					continue;
+				CX18_INFO("Autodetected %s card\n", cx->card->name);
+				goto done;
+			}
+		}
+	}
+done:
+
+	if (!cx->card) {
+		cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
+		CX18_ERR("Unknown card: vendor/device: [%04x:%04x]\n",
+			 cx->pci_dev->vendor, cx->pci_dev->device);
+		CX18_ERR("              subsystem vendor/device: [%04x:%04x]\n",
+			 cx->pci_dev->subsystem_vendor,
+			 cx->pci_dev->subsystem_device);
+		CX18_ERR("Defaulting to %s card\n", cx->card->name);
+		CX18_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
+		CX18_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
+		CX18_ERR("Prefix your subject line with [UNKNOWN CX18 CARD].\n");
+	}
+	cx->v4l2_cap = cx->card->v4l2_capabilities;
+	cx->card_name = cx->card->name;
+	cx->card_i2c = cx->card->i2c;
+}
+
+static int cx18_create_in_workq(struct cx18 *cx)
+{
+	snprintf(cx->in_workq_name, sizeof(cx->in_workq_name), "%s-in",
+		 cx->v4l2_dev.name);
+	cx->in_work_queue = alloc_ordered_workqueue("%s", 0, cx->in_workq_name);
+	if (!cx->in_work_queue) {
+		CX18_ERR("Unable to create incoming mailbox handler thread\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void cx18_init_in_work_orders(struct cx18 *cx)
+{
+	int i;
+	for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++) {
+		cx->in_work_order[i].cx = cx;
+		cx->in_work_order[i].str = cx->epu_debug_str;
+		INIT_WORK(&cx->in_work_order[i].work, cx18_in_work_handler);
+	}
+}
+
+/* Precondition: the cx18 structure has been memset to 0. Only
+   the dev and instance fields have been filled in.
+   No assumptions on the card type may be made here (see cx18_init_struct2
+   for that).
+ */
+static int cx18_init_struct1(struct cx18 *cx)
+{
+	int ret;
+
+	cx->base_addr = pci_resource_start(cx->pci_dev, 0);
+
+	mutex_init(&cx->serialize_lock);
+	mutex_init(&cx->gpio_lock);
+	mutex_init(&cx->epu2apu_mb_lock);
+	mutex_init(&cx->epu2cpu_mb_lock);
+
+	ret = cx18_create_in_workq(cx);
+	if (ret)
+		return ret;
+
+	cx18_init_in_work_orders(cx);
+
+	/* start counting open_id at 1 */
+	cx->open_id = 1;
+
+	/* Initial settings */
+	cx->cxhdl.port = CX2341X_PORT_MEMORY;
+	cx->cxhdl.capabilities = CX2341X_CAP_HAS_TS | CX2341X_CAP_HAS_SLICED_VBI;
+	cx->cxhdl.ops = &cx18_cxhdl_ops;
+	cx->cxhdl.func = cx18_api_func;
+	cx->cxhdl.priv = &cx->streams[CX18_ENC_STREAM_TYPE_MPG];
+	ret = cx2341x_handler_init(&cx->cxhdl, 50);
+	if (ret)
+		return ret;
+	cx->v4l2_dev.ctrl_handler = &cx->cxhdl.hdl;
+
+	cx->temporal_strength = cx->cxhdl.video_temporal_filter->cur.val;
+	cx->spatial_strength = cx->cxhdl.video_spatial_filter->cur.val;
+	cx->filter_mode = cx->cxhdl.video_spatial_filter_mode->cur.val |
+		(cx->cxhdl.video_temporal_filter_mode->cur.val << 1) |
+		(cx->cxhdl.video_median_filter_type->cur.val << 2);
+
+	init_waitqueue_head(&cx->cap_w);
+	init_waitqueue_head(&cx->mb_apu_waitq);
+	init_waitqueue_head(&cx->mb_cpu_waitq);
+	init_waitqueue_head(&cx->dma_waitq);
+
+	/* VBI */
+	cx->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE;
+	cx->vbi.sliced_in = &cx->vbi.in.fmt.sliced;
+
+	/* IVTV style VBI insertion into MPEG streams */
+	INIT_LIST_HEAD(&cx->vbi.sliced_mpeg_buf.list);
+	INIT_LIST_HEAD(&cx->vbi.sliced_mpeg_mdl.list);
+	INIT_LIST_HEAD(&cx->vbi.sliced_mpeg_mdl.buf_list);
+	list_add(&cx->vbi.sliced_mpeg_buf.list,
+		 &cx->vbi.sliced_mpeg_mdl.buf_list);
+	return 0;
+}
+
+/* Second initialization part. Here the card type has been
+   autodetected. */
+static void cx18_init_struct2(struct cx18 *cx)
+{
+	int i;
+
+	for (i = 0; i < CX18_CARD_MAX_VIDEO_INPUTS - 1; i++)
+		if (cx->card->video_inputs[i].video_type == 0)
+			break;
+	cx->nof_inputs = i;
+	for (i = 0; i < CX18_CARD_MAX_AUDIO_INPUTS - 1; i++)
+		if (cx->card->audio_inputs[i].audio_type == 0)
+			break;
+	cx->nof_audio_inputs = i;
+
+	/* Find tuner input */
+	for (i = 0; i < cx->nof_inputs; i++) {
+		if (cx->card->video_inputs[i].video_type ==
+				CX18_CARD_INPUT_VID_TUNER)
+			break;
+	}
+	if (i == cx->nof_inputs)
+		i = 0;
+	cx->active_input = i;
+	cx->audio_input = cx->card->video_inputs[i].audio_index;
+}
+
+static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev,
+			  const struct pci_device_id *pci_id)
+{
+	u16 cmd;
+	unsigned char pci_latency;
+
+	CX18_DEBUG_INFO("Enabling pci device\n");
+
+	if (pci_enable_device(pci_dev)) {
+		CX18_ERR("Can't enable device %d!\n", cx->instance);
+		return -EIO;
+	}
+	if (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) {
+		CX18_ERR("No suitable DMA available, card %d\n", cx->instance);
+		return -EIO;
+	}
+	if (!request_mem_region(cx->base_addr, CX18_MEM_SIZE, "cx18 encoder")) {
+		CX18_ERR("Cannot request encoder memory region, card %d\n",
+			 cx->instance);
+		return -EIO;
+	}
+
+	/* Enable bus mastering and memory mapped IO for the CX23418 */
+	pci_read_config_word(pci_dev, PCI_COMMAND, &cmd);
+	cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+	pci_write_config_word(pci_dev, PCI_COMMAND, cmd);
+
+	cx->card_rev = pci_dev->revision;
+	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency);
+
+	if (pci_latency < 64 && cx18_pci_latency) {
+		CX18_INFO("Unreasonably low latency timer, setting to 64 (was %d)\n",
+			  pci_latency);
+		pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, 64);
+		pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency);
+	}
+
+	CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, irq: %d, latency: %d, memory: 0x%llx\n",
+		   cx->pci_dev->device, cx->card_rev, pci_dev->bus->number,
+		   PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn),
+		   cx->pci_dev->irq, pci_latency, (u64)cx->base_addr);
+
+	return 0;
+}
+
+static void cx18_init_subdevs(struct cx18 *cx)
+{
+	u32 hw = cx->card->hw_all;
+	u32 device;
+	int i;
+
+	for (i = 0, device = 1; i < 32; i++, device <<= 1) {
+
+		if (!(device & hw))
+			continue;
+
+		switch (device) {
+		case CX18_HW_DVB:
+		case CX18_HW_TVEEPROM:
+			/* These subordinate devices do not use probing */
+			cx->hw_flags |= device;
+			break;
+		case CX18_HW_418_AV:
+			/* The A/V decoder gets probed earlier to set PLLs */
+			/* Just note that the card uses it (i.e. has analog) */
+			cx->hw_flags |= device;
+			break;
+		case CX18_HW_GPIO_RESET_CTRL:
+			/*
+			 * The Reset Controller gets probed and added to
+			 * hw_flags earlier for i2c adapter/bus initialization
+			 */
+			break;
+		case CX18_HW_GPIO_MUX:
+			if (cx18_gpio_register(cx, device) == 0)
+				cx->hw_flags |= device;
+			break;
+		default:
+			if (cx18_i2c_register(cx, i) == 0)
+				cx->hw_flags |= device;
+			break;
+		}
+	}
+
+	if (cx->hw_flags & CX18_HW_418_AV)
+		cx->sd_av = cx18_find_hw(cx, CX18_HW_418_AV);
+
+	if (cx->card->hw_muxer != 0)
+		cx->sd_extmux = cx18_find_hw(cx, cx->card->hw_muxer);
+}
+
+static int cx18_probe(struct pci_dev *pci_dev,
+		      const struct pci_device_id *pci_id)
+{
+	int retval = 0;
+	int i;
+	u32 devtype;
+	struct cx18 *cx;
+
+	/* FIXME - module parameter arrays constrain max instances */
+	i = atomic_inc_return(&cx18_instance) - 1;
+	if (i >= CX18_MAX_CARDS) {
+		printk(KERN_ERR "cx18: cannot manage card %d, driver has a limit of 0 - %d\n",
+		       i, CX18_MAX_CARDS - 1);
+		return -ENOMEM;
+	}
+
+	cx = kzalloc(sizeof(*cx), GFP_ATOMIC);
+	if (!cx)
+		return -ENOMEM;
+
+	cx->pci_dev = pci_dev;
+	cx->instance = i;
+
+	retval = v4l2_device_register(&pci_dev->dev, &cx->v4l2_dev);
+	if (retval) {
+		printk(KERN_ERR "cx18: v4l2_device_register of card %d failed\n",
+		       cx->instance);
+		kfree(cx);
+		return retval;
+	}
+	snprintf(cx->v4l2_dev.name, sizeof(cx->v4l2_dev.name), "cx18-%d",
+		 cx->instance);
+	CX18_INFO("Initializing card %d\n", cx->instance);
+
+	cx18_process_options(cx);
+	if (cx->options.cardtype == -1) {
+		retval = -ENODEV;
+		goto err;
+	}
+
+	retval = cx18_init_struct1(cx);
+	if (retval)
+		goto err;
+
+	CX18_DEBUG_INFO("base addr: 0x%llx\n", (u64)cx->base_addr);
+
+	/* PCI Device Setup */
+	retval = cx18_setup_pci(cx, pci_dev, pci_id);
+	if (retval != 0)
+		goto free_workqueues;
+
+	/* map io memory */
+	CX18_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+		   (u64)cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
+	cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
+				       CX18_MEM_SIZE);
+	if (!cx->enc_mem) {
+		CX18_ERR("ioremap failed. Can't get a window into CX23418 memory and register space\n");
+		CX18_ERR("Each capture card with a CX23418 needs 64 MB of vmalloc address space for the window\n");
+		CX18_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
+		CX18_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
+		retval = -ENOMEM;
+		goto free_mem;
+	}
+	cx->reg_mem = cx->enc_mem + CX18_REG_OFFSET;
+	devtype = cx18_read_reg(cx, 0xC72028);
+	switch (devtype & 0xff000000) {
+	case 0xff000000:
+		CX18_INFO("cx23418 revision %08x (A)\n", devtype);
+		break;
+	case 0x01000000:
+		CX18_INFO("cx23418 revision %08x (B)\n", devtype);
+		break;
+	default:
+		CX18_INFO("cx23418 revision %08x (Unknown)\n", devtype);
+		break;
+	}
+
+	cx18_init_power(cx, 1);
+	cx18_init_memory(cx);
+
+	cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET);
+	cx18_init_scb(cx);
+
+	cx18_gpio_init(cx);
+
+	/* Initialize integrated A/V decoder early to set PLLs, just in case */
+	retval = cx18_av_probe(cx);
+	if (retval) {
+		CX18_ERR("Could not register A/V decoder subdevice\n");
+		goto free_map;
+	}
+
+	/* Initialize GPIO Reset Controller to do chip resets during i2c init */
+	if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) {
+		if (cx18_gpio_register(cx, CX18_HW_GPIO_RESET_CTRL) != 0)
+			CX18_WARN("Could not register GPIO reset controllersubdevice; proceeding anyway.\n");
+		else
+			cx->hw_flags |= CX18_HW_GPIO_RESET_CTRL;
+	}
+
+	/* active i2c  */
+	CX18_DEBUG_INFO("activating i2c...\n");
+	retval = init_cx18_i2c(cx);
+	if (retval) {
+		CX18_ERR("Could not initialize i2c\n");
+		goto free_map;
+	}
+
+	if (cx->card->hw_all & CX18_HW_TVEEPROM) {
+		/* Based on the model number the cardtype may be changed.
+		   The PCI IDs are not always reliable. */
+		const struct cx18_card *orig_card = cx->card;
+		cx18_process_eeprom(cx);
+
+		if (cx->card != orig_card) {
+			/* Changed the cardtype; re-reset the I2C chips */
+			cx18_gpio_init(cx);
+			cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
+					core, reset, (u32) CX18_GPIO_RESET_I2C);
+		}
+	}
+	if (cx->card->comment)
+		CX18_INFO("%s", cx->card->comment);
+	if (cx->card->v4l2_capabilities == 0) {
+		retval = -ENODEV;
+		goto free_i2c;
+	}
+	cx18_init_memory(cx);
+	cx18_init_scb(cx);
+
+	/* Register IRQ */
+	retval = request_irq(cx->pci_dev->irq, cx18_irq_handler,
+			     IRQF_SHARED, cx->v4l2_dev.name, (void *)cx);
+	if (retval) {
+		CX18_ERR("Failed to register irq %d\n", retval);
+		goto free_i2c;
+	}
+
+	if (cx->std == 0)
+		cx->std = V4L2_STD_NTSC_M;
+
+	if (cx->options.tuner == -1) {
+		for (i = 0; i < CX18_CARD_MAX_TUNERS; i++) {
+			if ((cx->std & cx->card->tuners[i].std) == 0)
+				continue;
+			cx->options.tuner = cx->card->tuners[i].tuner;
+			break;
+		}
+	}
+	/* if no tuner was found, then pick the first tuner in the card list */
+	if (cx->options.tuner == -1 && cx->card->tuners[0].std) {
+		cx->std = cx->card->tuners[0].std;
+		if (cx->std & V4L2_STD_PAL)
+			cx->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
+		else if (cx->std & V4L2_STD_NTSC)
+			cx->std = V4L2_STD_NTSC_M;
+		else if (cx->std & V4L2_STD_SECAM)
+			cx->std = V4L2_STD_SECAM_L;
+		cx->options.tuner = cx->card->tuners[0].tuner;
+	}
+	if (cx->options.radio == -1)
+		cx->options.radio = (cx->card->radio_input.audio_type != 0);
+
+	/* The card is now fully identified, continue with card-specific
+	   initialization. */
+	cx18_init_struct2(cx);
+
+	cx18_init_subdevs(cx);
+
+	if (cx->std & V4L2_STD_525_60)
+		cx->is_60hz = 1;
+	else
+		cx->is_50hz = 1;
+
+	cx2341x_handler_set_50hz(&cx->cxhdl, !cx->is_60hz);
+
+	if (cx->options.radio > 0)
+		cx->v4l2_cap |= V4L2_CAP_RADIO;
+
+	if (cx->options.tuner > -1) {
+		struct tuner_setup setup;
+
+		setup.addr = ADDR_UNSET;
+		setup.type = cx->options.tuner;
+		setup.mode_mask = T_ANALOG_TV;  /* matches TV tuners */
+		setup.config = NULL;
+		if (cx->options.radio > 0)
+			setup.mode_mask |= T_RADIO;
+		setup.tuner_callback = (setup.type == TUNER_XC2028) ?
+			cx18_reset_tuner_gpio : NULL;
+		cx18_call_all(cx, tuner, s_type_addr, &setup);
+		if (setup.type == TUNER_XC2028) {
+			static struct xc2028_ctrl ctrl = {
+				.fname = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+			};
+			struct v4l2_priv_tun_config cfg = {
+				.tuner = cx->options.tuner,
+				.priv = &ctrl,
+			};
+			cx18_call_all(cx, tuner, s_config, &cfg);
+		}
+	}
+
+	/* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
+	   are not. */
+	cx->tuner_std = cx->std;
+	if (cx->std == V4L2_STD_ALL)
+		cx->std = V4L2_STD_NTSC_M;
+
+	retval = cx18_streams_setup(cx);
+	if (retval) {
+		CX18_ERR("Error %d setting up streams\n", retval);
+		goto free_irq;
+	}
+	retval = cx18_streams_register(cx);
+	if (retval) {
+		CX18_ERR("Error %d registering devices\n", retval);
+		goto free_streams;
+	}
+
+	CX18_INFO("Initialized card: %s\n", cx->card_name);
+
+	/* Load cx18 submodules (cx18-alsa) */
+	request_modules(cx);
+	return 0;
+
+free_streams:
+	cx18_streams_cleanup(cx, 1);
+free_irq:
+	free_irq(cx->pci_dev->irq, (void *)cx);
+free_i2c:
+	exit_cx18_i2c(cx);
+free_map:
+	cx18_iounmap(cx);
+free_mem:
+	release_mem_region(cx->base_addr, CX18_MEM_SIZE);
+free_workqueues:
+	destroy_workqueue(cx->in_work_queue);
+err:
+	CX18_ERR("Error %d on initialization\n", retval);
+
+	v4l2_device_unregister(&cx->v4l2_dev);
+	kfree(cx);
+	return retval;
+}
+
+int cx18_init_on_first_open(struct cx18 *cx)
+{
+	int video_input;
+	int fw_retry_count = 3;
+	struct v4l2_frequency vf;
+	struct cx18_open_id fh;
+	v4l2_std_id std;
+
+	fh.cx = cx;
+
+	if (test_bit(CX18_F_I_FAILED, &cx->i_flags))
+		return -ENXIO;
+
+	if (test_and_set_bit(CX18_F_I_INITED, &cx->i_flags))
+		return 0;
+
+	while (--fw_retry_count > 0) {
+		/* load firmware */
+		if (cx18_firmware_init(cx) == 0)
+			break;
+		if (fw_retry_count > 1)
+			CX18_WARN("Retry loading firmware\n");
+	}
+
+	if (fw_retry_count == 0) {
+		set_bit(CX18_F_I_FAILED, &cx->i_flags);
+		return -ENXIO;
+	}
+	set_bit(CX18_F_I_LOADED_FW, &cx->i_flags);
+
+	/*
+	 * Init the firmware twice to work around a silicon bug
+	 * with the digital TS.
+	 *
+	 * The second firmware load requires us to normalize the APU state,
+	 * or the audio for the first analog capture will be badly incorrect.
+	 *
+	 * I can't seem to call APU_RESETAI and have it succeed without the
+	 * APU capturing audio, so we start and stop it here to do the reset
+	 */
+
+	/* MPEG Encoding, 224 kbps, MPEG Layer II, 48 ksps */
+	cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0);
+	cx18_vapi(cx, CX18_APU_RESETAI, 0);
+	cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
+
+	fw_retry_count = 3;
+	while (--fw_retry_count > 0) {
+		/* load firmware */
+		if (cx18_firmware_init(cx) == 0)
+			break;
+		if (fw_retry_count > 1)
+			CX18_WARN("Retry loading firmware\n");
+	}
+
+	if (fw_retry_count == 0) {
+		set_bit(CX18_F_I_FAILED, &cx->i_flags);
+		return -ENXIO;
+	}
+
+	/*
+	 * The second firmware load requires us to normalize the APU state,
+	 * or the audio for the first analog capture will be badly incorrect.
+	 *
+	 * I can't seem to call APU_RESETAI and have it succeed without the
+	 * APU capturing audio, so we start and stop it here to do the reset
+	 */
+
+	/* MPEG Encoding, 224 kbps, MPEG Layer II, 48 ksps */
+	cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0);
+	cx18_vapi(cx, CX18_APU_RESETAI, 0);
+	cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
+
+	/* Init the A/V decoder, if it hasn't been already */
+	v4l2_subdev_call(cx->sd_av, core, load_fw);
+
+	vf.tuner = 0;
+	vf.type = V4L2_TUNER_ANALOG_TV;
+	vf.frequency = 6400; /* the tuner 'baseline' frequency */
+
+	/* Set initial frequency. For PAL/SECAM broadcasts no
+	   'default' channel exists AFAIK. */
+	if (cx->std == V4L2_STD_NTSC_M_JP)
+		vf.frequency = 1460;	/* ch. 1 91250*16/1000 */
+	else if (cx->std & V4L2_STD_NTSC_M)
+		vf.frequency = 1076;	/* ch. 4 67250*16/1000 */
+
+	video_input = cx->active_input;
+	cx->active_input++;	/* Force update of input */
+	cx18_s_input(NULL, &fh, video_input);
+
+	/* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
+	   in one place. */
+	cx->std++;		/* Force full standard initialization */
+	std = (cx->tuner_std == V4L2_STD_ALL) ? V4L2_STD_NTSC_M : cx->tuner_std;
+	cx18_s_std(NULL, &fh, std);
+	cx18_s_frequency(NULL, &fh, &vf);
+	return 0;
+}
+
+static void cx18_cancel_in_work_orders(struct cx18 *cx)
+{
+	int i;
+	for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++)
+		cancel_work_sync(&cx->in_work_order[i].work);
+}
+
+static void cx18_cancel_out_work_orders(struct cx18 *cx)
+{
+	int i;
+	for (i = 0; i < CX18_MAX_STREAMS; i++)
+		if (cx->streams[i].video_dev.v4l2_dev)
+			cancel_work_sync(&cx->streams[i].out_work_order);
+}
+
+static void cx18_remove(struct pci_dev *pci_dev)
+{
+	struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+	struct cx18 *cx = to_cx18(v4l2_dev);
+	int i;
+
+	CX18_DEBUG_INFO("Removing Card\n");
+
+	flush_request_modules(cx);
+
+	/* Stop all captures */
+	CX18_DEBUG_INFO("Stopping all streams\n");
+	if (atomic_read(&cx->tot_capturing) > 0)
+		cx18_stop_all_captures(cx);
+
+	/* Stop interrupts that cause incoming work to be queued */
+	cx18_sw1_irq_disable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
+
+	/* Incoming work can cause outgoing work, so clean up incoming first */
+	cx18_cancel_in_work_orders(cx);
+	cx18_cancel_out_work_orders(cx);
+
+	/* Stop ack interrupts that may have been needed for work to finish */
+	cx18_sw2_irq_disable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
+
+	cx18_halt_firmware(cx);
+
+	destroy_workqueue(cx->in_work_queue);
+
+	cx18_streams_cleanup(cx, 1);
+
+	exit_cx18_i2c(cx);
+
+	free_irq(cx->pci_dev->irq, (void *)cx);
+
+	cx18_iounmap(cx);
+
+	release_mem_region(cx->base_addr, CX18_MEM_SIZE);
+
+	pci_disable_device(cx->pci_dev);
+
+	if (cx->vbi.sliced_mpeg_data[0])
+		for (i = 0; i < CX18_VBI_FRAMES; i++)
+			kfree(cx->vbi.sliced_mpeg_data[i]);
+
+	v4l2_ctrl_handler_free(&cx->av_state.hdl);
+
+	CX18_INFO("Removed %s\n", cx->card_name);
+
+	v4l2_device_unregister(v4l2_dev);
+	kfree(cx);
+}
+
+
+/* define a pci_driver for card detection */
+static struct pci_driver cx18_pci_driver = {
+      .name =     "cx18",
+      .id_table = cx18_pci_tbl,
+      .probe =    cx18_probe,
+      .remove =   cx18_remove,
+};
+
+static int __init module_start(void)
+{
+	printk(KERN_INFO "cx18:  Start initialization, version %s\n",
+	       CX18_VERSION);
+
+	/* Validate parameters */
+	if (cx18_first_minor < 0 || cx18_first_minor >= CX18_MAX_CARDS) {
+		printk(KERN_ERR "cx18:  Exiting, cx18_first_minor must be between 0 and %d\n",
+		     CX18_MAX_CARDS - 1);
+		return -1;
+	}
+
+	if (cx18_debug < 0 || cx18_debug > 511) {
+		cx18_debug = 0;
+		printk(KERN_INFO "cx18:   Debug value must be >= 0 and <= 511!\n");
+	}
+
+	if (pci_register_driver(&cx18_pci_driver)) {
+		printk(KERN_ERR "cx18:   Error detecting PCI card\n");
+		return -ENODEV;
+	}
+	printk(KERN_INFO "cx18:  End initialization\n");
+	return 0;
+}
+
+static void __exit module_cleanup(void)
+{
+	pci_unregister_driver(&cx18_pci_driver);
+}
+
+module_init(module_start);
+module_exit(module_cleanup);
+MODULE_FIRMWARE(XC2028_DEFAULT_FIRMWARE);
diff --git a/drivers/media/pci/cx18/cx18-driver.h b/drivers/media/pci/cx18/cx18-driver.h
new file mode 100644
index 000000000..0b707faca
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-driver.h
@@ -0,0 +1,718 @@
+/*
+ *  cx18 driver internal defines and structures
+ *
+ *  Derived from ivtv-driver.h
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef CX18_DRIVER_H
+#define CX18_DRIVER_H
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/sched/signal.h>
+#include <linux/fs.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/list.h>
+#include <linux/unistd.h>
+#include <linux/pagemap.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <asm/byteorder.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fh.h>
+#include <media/tuner.h>
+#include <media/i2c/ir-kbd-i2c.h>
+#include "cx18-mailbox.h"
+#include "cx18-av-core.h"
+#include "cx23418.h"
+
+/* DVB */
+#include <media/demux.h>
+#include <media/dmxdev.h>
+#include <media/dvb_demux.h>
+#include <media/dvb_frontend.h>
+#include <media/dvb_net.h>
+#include <media/dvbdev.h>
+
+/* Videobuf / YUV support */
+#include <media/videobuf-core.h>
+#include <media/videobuf-vmalloc.h>
+
+#ifndef CONFIG_PCI
+#  error "This driver requires kernel PCI support."
+#endif
+
+#define CX18_MEM_OFFSET	0x00000000
+#define CX18_MEM_SIZE	0x04000000
+#define CX18_REG_OFFSET	0x02000000
+
+/* Maximum cx18 driver instances. */
+#define CX18_MAX_CARDS 32
+
+/* Supported cards */
+#define CX18_CARD_HVR_1600_ESMT	      0	/* Hauppauge HVR 1600 (ESMT memory) */
+#define CX18_CARD_HVR_1600_SAMSUNG    1	/* Hauppauge HVR 1600 (Samsung memory) */
+#define CX18_CARD_COMPRO_H900	      2	/* Compro VideoMate H900 */
+#define CX18_CARD_YUAN_MPC718	      3	/* Yuan MPC718 */
+#define CX18_CARD_CNXT_RAPTOR_PAL     4	/* Conexant Raptor PAL */
+#define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
+#define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100 */
+#define CX18_CARD_LEADTEK_DVR3100H    7 /* Leadtek WinFast DVR3100 H */
+#define CX18_CARD_GOTVIEW_PCI_DVD3    8 /* GoTView PCI DVD3 Hybrid */
+#define CX18_CARD_HVR_1600_S5H1411    9 /* Hauppauge HVR 1600 s5h1411/tda18271*/
+#define CX18_CARD_LAST		      9
+
+#define CX18_ENC_STREAM_TYPE_MPG  0
+#define CX18_ENC_STREAM_TYPE_TS   1
+#define CX18_ENC_STREAM_TYPE_YUV  2
+#define CX18_ENC_STREAM_TYPE_VBI  3
+#define CX18_ENC_STREAM_TYPE_PCM  4
+#define CX18_ENC_STREAM_TYPE_IDX  5
+#define CX18_ENC_STREAM_TYPE_RAD  6
+#define CX18_MAX_STREAMS	  7
+
+/* system vendor and device IDs */
+#define PCI_VENDOR_ID_CX      0x14f1
+#define PCI_DEVICE_ID_CX23418 0x5b7a
+
+/* subsystem vendor ID */
+#define CX18_PCI_ID_HAUPPAUGE		0x0070
+#define CX18_PCI_ID_COMPRO		0x185b
+#define CX18_PCI_ID_YUAN		0x12ab
+#define CX18_PCI_ID_CONEXANT		0x14f1
+#define CX18_PCI_ID_TOSHIBA		0x1179
+#define CX18_PCI_ID_LEADTEK		0x107D
+#define CX18_PCI_ID_GOTVIEW		0x5854
+
+/* ======================================================================== */
+/* ========================== START USER SETTABLE DMA VARIABLES =========== */
+/* ======================================================================== */
+
+/* DMA Buffers, Default size in MB allocated */
+#define CX18_DEFAULT_ENC_TS_BUFFERS  1
+#define CX18_DEFAULT_ENC_MPG_BUFFERS 2
+#define CX18_DEFAULT_ENC_IDX_BUFFERS 1
+#define CX18_DEFAULT_ENC_YUV_BUFFERS 2
+#define CX18_DEFAULT_ENC_VBI_BUFFERS 1
+#define CX18_DEFAULT_ENC_PCM_BUFFERS 1
+
+/* Maximum firmware DMA buffers per stream */
+#define CX18_MAX_FW_MDLS_PER_STREAM 63
+
+/* YUV buffer sizes in bytes to ensure integer # of frames per buffer */
+#define CX18_UNIT_ENC_YUV_BUFSIZE	(720 *  32 * 3 / 2) /* bytes */
+#define CX18_625_LINE_ENC_YUV_BUFSIZE	(CX18_UNIT_ENC_YUV_BUFSIZE * 576/32)
+#define CX18_525_LINE_ENC_YUV_BUFSIZE	(CX18_UNIT_ENC_YUV_BUFSIZE * 480/32)
+
+/* IDX buffer size should be a multiple of the index entry size from the chip */
+struct cx18_enc_idx_entry {
+	__le32 length;
+	__le32 offset_low;
+	__le32 offset_high;
+	__le32 flags;
+	__le32 pts_low;
+	__le32 pts_high;
+} __attribute__ ((packed));
+#define CX18_UNIT_ENC_IDX_BUFSIZE \
+	(sizeof(struct cx18_enc_idx_entry) * V4L2_ENC_IDX_ENTRIES)
+
+/* DMA buffer, default size in kB allocated */
+#define CX18_DEFAULT_ENC_TS_BUFSIZE   32
+#define CX18_DEFAULT_ENC_MPG_BUFSIZE  32
+#define CX18_DEFAULT_ENC_IDX_BUFSIZE  (CX18_UNIT_ENC_IDX_BUFSIZE * 1 / 1024 + 1)
+#define CX18_DEFAULT_ENC_YUV_BUFSIZE  (CX18_UNIT_ENC_YUV_BUFSIZE * 3 / 1024 + 1)
+#define CX18_DEFAULT_ENC_PCM_BUFSIZE   4
+
+/* i2c stuff */
+#define I2C_CLIENTS_MAX 16
+
+/* debugging */
+
+/* Flag to turn on high volume debugging */
+#define CX18_DBGFLG_WARN  (1 << 0)
+#define CX18_DBGFLG_INFO  (1 << 1)
+#define CX18_DBGFLG_API   (1 << 2)
+#define CX18_DBGFLG_DMA   (1 << 3)
+#define CX18_DBGFLG_IOCTL (1 << 4)
+#define CX18_DBGFLG_FILE  (1 << 5)
+#define CX18_DBGFLG_I2C   (1 << 6)
+#define CX18_DBGFLG_IRQ   (1 << 7)
+/* Flag to turn on high volume debugging */
+#define CX18_DBGFLG_HIGHVOL (1 << 8)
+
+/* NOTE: extra space before comma in 'fmt , ## args' is required for
+   gcc-2.95, otherwise it won't compile. */
+#define CX18_DEBUG(x, type, fmt, args...) \
+	do { \
+		if ((x) & cx18_debug) \
+			v4l2_info(&cx->v4l2_dev, " " type ": " fmt , ## args); \
+	} while (0)
+#define CX18_DEBUG_WARN(fmt, args...)  CX18_DEBUG(CX18_DBGFLG_WARN, "warning", fmt , ## args)
+#define CX18_DEBUG_INFO(fmt, args...)  CX18_DEBUG(CX18_DBGFLG_INFO, "info", fmt , ## args)
+#define CX18_DEBUG_API(fmt, args...)   CX18_DEBUG(CX18_DBGFLG_API, "api", fmt , ## args)
+#define CX18_DEBUG_DMA(fmt, args...)   CX18_DEBUG(CX18_DBGFLG_DMA, "dma", fmt , ## args)
+#define CX18_DEBUG_IOCTL(fmt, args...) CX18_DEBUG(CX18_DBGFLG_IOCTL, "ioctl", fmt , ## args)
+#define CX18_DEBUG_FILE(fmt, args...)  CX18_DEBUG(CX18_DBGFLG_FILE, "file", fmt , ## args)
+#define CX18_DEBUG_I2C(fmt, args...)   CX18_DEBUG(CX18_DBGFLG_I2C, "i2c", fmt , ## args)
+#define CX18_DEBUG_IRQ(fmt, args...)   CX18_DEBUG(CX18_DBGFLG_IRQ, "irq", fmt , ## args)
+
+#define CX18_DEBUG_HIGH_VOL(x, type, fmt, args...) \
+	do { \
+		if (((x) & cx18_debug) && (cx18_debug & CX18_DBGFLG_HIGHVOL)) \
+			v4l2_info(&cx->v4l2_dev, " " type ": " fmt , ## args); \
+	} while (0)
+#define CX18_DEBUG_HI_WARN(fmt, args...)  CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_WARN, "warning", fmt , ## args)
+#define CX18_DEBUG_HI_INFO(fmt, args...)  CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_INFO, "info", fmt , ## args)
+#define CX18_DEBUG_HI_API(fmt, args...)   CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_API, "api", fmt , ## args)
+#define CX18_DEBUG_HI_DMA(fmt, args...)   CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_DMA, "dma", fmt , ## args)
+#define CX18_DEBUG_HI_IOCTL(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_IOCTL, "ioctl", fmt , ## args)
+#define CX18_DEBUG_HI_FILE(fmt, args...)  CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_FILE, "file", fmt , ## args)
+#define CX18_DEBUG_HI_I2C(fmt, args...)   CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_I2C, "i2c", fmt , ## args)
+#define CX18_DEBUG_HI_IRQ(fmt, args...)   CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_IRQ, "irq", fmt , ## args)
+
+/* Standard kernel messages */
+#define CX18_ERR(fmt, args...)      v4l2_err(&cx->v4l2_dev, fmt , ## args)
+#define CX18_WARN(fmt, args...)     v4l2_warn(&cx->v4l2_dev, fmt , ## args)
+#define CX18_INFO(fmt, args...)     v4l2_info(&cx->v4l2_dev, fmt , ## args)
+
+/* Messages for internal subdevs to use */
+#define CX18_DEBUG_DEV(x, dev, type, fmt, args...) \
+	do { \
+		if ((x) & cx18_debug) \
+			v4l2_info(dev, " " type ": " fmt , ## args); \
+	} while (0)
+#define CX18_DEBUG_WARN_DEV(dev, fmt, args...) \
+		CX18_DEBUG_DEV(CX18_DBGFLG_WARN, dev, "warning", fmt , ## args)
+#define CX18_DEBUG_INFO_DEV(dev, fmt, args...) \
+		CX18_DEBUG_DEV(CX18_DBGFLG_INFO, dev, "info", fmt , ## args)
+#define CX18_DEBUG_API_DEV(dev, fmt, args...) \
+		CX18_DEBUG_DEV(CX18_DBGFLG_API, dev, "api", fmt , ## args)
+#define CX18_DEBUG_DMA_DEV(dev, fmt, args...) \
+		CX18_DEBUG_DEV(CX18_DBGFLG_DMA, dev, "dma", fmt , ## args)
+#define CX18_DEBUG_IOCTL_DEV(dev, fmt, args...) \
+		CX18_DEBUG_DEV(CX18_DBGFLG_IOCTL, dev, "ioctl", fmt , ## args)
+#define CX18_DEBUG_FILE_DEV(dev, fmt, args...) \
+		CX18_DEBUG_DEV(CX18_DBGFLG_FILE, dev, "file", fmt , ## args)
+#define CX18_DEBUG_I2C_DEV(dev, fmt, args...) \
+		CX18_DEBUG_DEV(CX18_DBGFLG_I2C, dev, "i2c", fmt , ## args)
+#define CX18_DEBUG_IRQ_DEV(dev, fmt, args...) \
+		CX18_DEBUG_DEV(CX18_DBGFLG_IRQ, dev, "irq", fmt , ## args)
+
+#define CX18_DEBUG_HIGH_VOL_DEV(x, dev, type, fmt, args...) \
+	do { \
+		if (((x) & cx18_debug) && (cx18_debug & CX18_DBGFLG_HIGHVOL)) \
+			v4l2_info(dev, " " type ": " fmt , ## args); \
+	} while (0)
+#define CX18_DEBUG_HI_WARN_DEV(dev, fmt, args...) \
+	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_WARN, dev, "warning", fmt , ## args)
+#define CX18_DEBUG_HI_INFO_DEV(dev, fmt, args...) \
+	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_INFO, dev, "info", fmt , ## args)
+#define CX18_DEBUG_HI_API_DEV(dev, fmt, args...) \
+	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_API, dev, "api", fmt , ## args)
+#define CX18_DEBUG_HI_DMA_DEV(dev, fmt, args...) \
+	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_DMA, dev, "dma", fmt , ## args)
+#define CX18_DEBUG_HI_IOCTL_DEV(dev, fmt, args...) \
+	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_IOCTL, dev, "ioctl", fmt , ## args)
+#define CX18_DEBUG_HI_FILE_DEV(dev, fmt, args...) \
+	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_FILE, dev, "file", fmt , ## args)
+#define CX18_DEBUG_HI_I2C_DEV(dev, fmt, args...) \
+	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_I2C, dev, "i2c", fmt , ## args)
+#define CX18_DEBUG_HI_IRQ_DEV(dev, fmt, args...) \
+	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_IRQ, dev, "irq", fmt , ## args)
+
+#define CX18_ERR_DEV(dev, fmt, args...)      v4l2_err(dev, fmt , ## args)
+#define CX18_WARN_DEV(dev, fmt, args...)     v4l2_warn(dev, fmt , ## args)
+#define CX18_INFO_DEV(dev, fmt, args...)     v4l2_info(dev, fmt , ## args)
+
+extern int cx18_debug;
+
+struct cx18_options {
+	int megabytes[CX18_MAX_STREAMS]; /* Size in megabytes of each stream */
+	int cardtype;		/* force card type on load */
+	int tuner;		/* set tuner on load */
+	int radio;		/* enable/disable radio */
+};
+
+/* per-mdl bit flags */
+#define CX18_F_M_NEED_SWAP  0	/* mdl buffer data must be endianness swapped */
+
+/* per-stream, s_flags */
+#define CX18_F_S_CLAIMED	3	/* this stream is claimed */
+#define CX18_F_S_STREAMING      4	/* the fw is decoding/encoding this stream */
+#define CX18_F_S_INTERNAL_USE	5	/* this stream is used internally (sliced VBI processing) */
+#define CX18_F_S_STREAMOFF	7	/* signal end of stream EOS */
+#define CX18_F_S_APPL_IO        8	/* this stream is used read/written by an application */
+#define CX18_F_S_STOPPING	9	/* telling the fw to stop capturing */
+
+/* per-cx18, i_flags */
+#define CX18_F_I_LOADED_FW		0	/* Loaded firmware 1st time */
+#define CX18_F_I_EOS			4	/* End of encoder stream */
+#define CX18_F_I_RADIO_USER		5	/* radio tuner is selected */
+#define CX18_F_I_ENC_PAUSED		13	/* the encoder is paused */
+#define CX18_F_I_INITED			21	/* set after first open */
+#define CX18_F_I_FAILED			22	/* set if first open failed */
+
+/* These are the VBI types as they appear in the embedded VBI private packets. */
+#define CX18_SLICED_TYPE_TELETEXT_B     (1)
+#define CX18_SLICED_TYPE_CAPTION_525    (4)
+#define CX18_SLICED_TYPE_WSS_625        (5)
+#define CX18_SLICED_TYPE_VPS            (7)
+
+/**
+ * list_entry_is_past_end - check if a previous loop cursor is off list end
+ * @pos:	the type * previously used as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_head within the struct.
+ *
+ * Check if the entry's list_head is the head of the list, thus it's not a
+ * real entry but was the loop cursor that walked past the end
+ */
+#define list_entry_is_past_end(pos, head, member) \
+	(&pos->member == (head))
+
+struct cx18_buffer {
+	struct list_head list;
+	dma_addr_t dma_handle;
+	char *buf;
+
+	u32 bytesused;
+	u32 readpos;
+};
+
+struct cx18_mdl {
+	struct list_head list;
+	u32 id;		/* index into cx->scb->cpu_mdl[] of 1st cx18_mdl_ent */
+
+	unsigned int skipped;
+	unsigned long m_flags;
+
+	struct list_head buf_list;
+	struct cx18_buffer *curr_buf; /* current buffer in list for reading */
+
+	u32 bytesused;
+	u32 readpos;
+};
+
+struct cx18_queue {
+	struct list_head list;
+	atomic_t depth;
+	u32 bytesused;
+	spinlock_t lock;
+};
+
+struct cx18_stream; /* forward reference */
+
+struct cx18_dvb {
+	struct cx18_stream *stream;
+	struct dmx_frontend hw_frontend;
+	struct dmx_frontend mem_frontend;
+	struct dmxdev dmxdev;
+	struct dvb_adapter dvb_adapter;
+	struct dvb_demux demux;
+	struct dvb_frontend *fe;
+	struct dvb_net dvbnet;
+	int enabled;
+	int feeding;
+	struct mutex feedlock;
+};
+
+struct cx18;	 /* forward reference */
+struct cx18_scb; /* forward reference */
+
+
+#define CX18_MAX_MDL_ACKS 2
+#define CX18_MAX_IN_WORK_ORDERS (CX18_MAX_FW_MDLS_PER_STREAM + 7)
+/* CPU_DE_RELEASE_MDL can burst CX18_MAX_FW_MDLS_PER_STREAM orders in a group */
+
+#define CX18_F_EWO_MB_STALE_UPON_RECEIPT 0x1
+#define CX18_F_EWO_MB_STALE_WHILE_PROC   0x2
+#define CX18_F_EWO_MB_STALE \
+	     (CX18_F_EWO_MB_STALE_UPON_RECEIPT | CX18_F_EWO_MB_STALE_WHILE_PROC)
+
+struct cx18_in_work_order {
+	struct work_struct work;
+	atomic_t pending;
+	struct cx18 *cx;
+	unsigned long flags;
+	int rpu;
+	struct cx18_mailbox mb;
+	struct cx18_mdl_ack mdl_ack[CX18_MAX_MDL_ACKS];
+	char *str;
+};
+
+#define CX18_INVALID_TASK_HANDLE 0xffffffff
+
+struct cx18_stream {
+	/* These first five fields are always set, even if the stream
+	   is not actually created. */
+	struct video_device video_dev;	/* v4l2_dev is NULL when stream not created */
+	struct cx18_dvb *dvb;		/* DVB / Digital Transport */
+	struct cx18 *cx;		/* for ease of use */
+	const char *name;		/* name of the stream */
+	int type;			/* stream type */
+	u32 handle;			/* task handle */
+	u32 v4l2_dev_caps;		/* device capabilities */
+	unsigned int mdl_base_idx;
+
+	u32 id;
+	unsigned long s_flags;	/* status flags, see above */
+	int dma;		/* can be PCI_DMA_TODEVICE,
+				   PCI_DMA_FROMDEVICE or
+				   PCI_DMA_NONE */
+	wait_queue_head_t waitq;
+
+	/* Buffers */
+	struct list_head buf_pool;	/* buffers not attached to an MDL */
+	u32 buffers;			/* total buffers owned by this stream */
+	u32 buf_size;			/* size in bytes of a single buffer */
+
+	/* MDL sizes - all stream MDLs are the same size */
+	u32 bufs_per_mdl;
+	u32 mdl_size;		/* total bytes in all buffers in a mdl */
+
+	/* MDL Queues */
+	struct cx18_queue q_free;	/* free - in rotation, not committed */
+	struct cx18_queue q_busy;	/* busy - in use by firmware */
+	struct cx18_queue q_full;	/* full - data for user apps */
+	struct cx18_queue q_idle;	/* idle - not in rotation */
+
+	struct work_struct out_work_order;
+
+	/* Videobuf for YUV video */
+	u32 pixelformat;
+	u32 vb_bytes_per_frame;
+	u32 vb_bytes_per_line;
+	struct list_head vb_capture;    /* video capture queue */
+	spinlock_t vb_lock;
+	struct timer_list vb_timeout;
+
+	struct videobuf_queue vbuf_q;
+	spinlock_t vbuf_q_lock; /* Protect vbuf_q */
+	enum v4l2_buf_type vb_type;
+};
+
+struct cx18_videobuf_buffer {
+	/* Common video buffer sub-system struct */
+	struct videobuf_buffer vb;
+	v4l2_std_id tvnorm; /* selected tv norm */
+	u32 bytes_used;
+};
+
+struct cx18_open_id {
+	struct v4l2_fh fh;
+	u32 open_id;
+	int type;
+	struct cx18 *cx;
+};
+
+static inline struct cx18_open_id *fh2id(struct v4l2_fh *fh)
+{
+	return container_of(fh, struct cx18_open_id, fh);
+}
+
+static inline struct cx18_open_id *file2id(struct file *file)
+{
+	return fh2id(file->private_data);
+}
+
+/* forward declaration of struct defined in cx18-cards.h */
+struct cx18_card;
+
+/*
+ * A note about "sliced" VBI data as implemented in this driver:
+ *
+ * Currently we collect the sliced VBI in the form of Ancillary Data
+ * packets, inserted by the AV core decoder/digitizer/slicer in the
+ * horizontal blanking region of the VBI lines, in "raw" mode as far as
+ * the Encoder is concerned.  We don't ever tell the Encoder itself
+ * to provide sliced VBI. (AV Core: sliced mode - Encoder: raw mode)
+ *
+ * We then process the ancillary data ourselves to send the sliced data
+ * to the user application directly or build up MPEG-2 private stream 1
+ * packets to splice into (only!) MPEG-2 PS streams for the user app.
+ *
+ * (That's how ivtv essentially does it.)
+ *
+ * The Encoder should be able to extract certain sliced VBI data for
+ * us and provide it in a separate stream or splice it into any type of
+ * MPEG PS or TS stream, but this isn't implemented yet.
+ */
+
+/*
+ * Number of "raw" VBI samples per horizontal line we tell the Encoder to
+ * grab from the decoder/digitizer/slicer output for raw or sliced VBI.
+ * It depends on the pixel clock and the horiz rate:
+ *
+ * (1/Fh)*(2*Fp) = Samples/line
+ *     = 4 bytes EAV + Anc data in hblank + 4 bytes SAV + active samples
+ *
+ *  Sliced VBI data is sent as ancillary data during horizontal blanking
+ *  Raw VBI is sent as active video samples during vertcal blanking
+ *
+ *  We use a  BT.656 pxiel clock of 13.5 MHz and a BT.656 active line
+ *  length of 720 pixels @ 4:2:2 sampling.  Thus...
+ *
+ *  For systems that use a 15.734 kHz horizontal rate, such as
+ *  NTSC-M, PAL-M, PAL-60, and other 60 Hz/525 line systems, we have:
+ *
+ *  (1/15.734 kHz) * 2 * 13.5 MHz = 1716 samples/line =
+ *  4 bytes SAV + 268 bytes anc data + 4 bytes SAV + 1440 active samples
+ *
+ *  For systems that use a 15.625 kHz horizontal rate, such as
+ *  PAL-B/G/H, PAL-I, SECAM-L and other 50 Hz/625 line systems, we have:
+ *
+ *  (1/15.625 kHz) * 2 * 13.5 MHz = 1728 samples/line =
+ *  4 bytes SAV + 280 bytes anc data + 4 bytes SAV + 1440 active samples
+ */
+#define VBI_ACTIVE_SAMPLES	1444 /* 4 byte SAV + 720 Y + 720 U/V */
+#define VBI_HBLANK_SAMPLES_60HZ	272 /* 4 byte EAV + 268 anc/fill */
+#define VBI_HBLANK_SAMPLES_50HZ	284 /* 4 byte EAV + 280 anc/fill */
+
+#define CX18_VBI_FRAMES 32
+
+struct vbi_info {
+	/* Current state of v4l2 VBI settings for this device */
+	struct v4l2_format in;
+	struct v4l2_sliced_vbi_format *sliced_in; /* pointer to in.fmt.sliced */
+	u32 count;    /* Count of VBI data lines: 60 Hz: 12 or 50 Hz: 18 */
+	u32 start[2]; /* First VBI data line per field: 10 & 273 or 6 & 318 */
+
+	u32 frame; /* Count of VBI buffers/frames received from Encoder */
+
+	/*
+	 * Vars for creation and insertion of MPEG Private Stream 1 packets
+	 * of sliced VBI data into an MPEG PS
+	 */
+
+	/* Boolean: create and insert Private Stream 1 packets into the PS */
+	int insert_mpeg;
+
+	/*
+	 * Buffer for the maximum of 2 * 18 * packet_size sliced VBI lines.
+	 * Used in cx18-vbi.c only for collecting sliced data, and as a source
+	 * during conversion of sliced VBI data into MPEG Priv Stream 1 packets.
+	 * We don't need to save state here, but the array may have been a bit
+	 * too big (2304 bytes) to alloc from the stack.
+	 */
+	struct v4l2_sliced_vbi_data sliced_data[36];
+
+	/*
+	 * A ring buffer of driver-generated MPEG-2 PS
+	 * Program Pack/Private Stream 1 packets for sliced VBI data insertion
+	 * into the MPEG PS stream.
+	 *
+	 * In each sliced_mpeg_data[] buffer is:
+	 *	16 byte MPEG-2 PS Program Pack Header
+	 *	16 byte MPEG-2 Private Stream 1 PES Header
+	 *	 4 byte magic number: "itv0" or "ITV0"
+	 *	 4 byte first  field line mask, if "itv0"
+	 *	 4 byte second field line mask, if "itv0"
+	 *	36 lines, if "ITV0"; or <36 lines, if "itv0"; of sliced VBI data
+	 *
+	 *	Each line in the payload is
+	 *	 1 byte line header derived from the SDID (WSS, CC, VPS, etc.)
+	 *	42 bytes of line data
+	 *
+	 * That's a maximum 1552 bytes of payload in the Private Stream 1 packet
+	 * which is the payload size a PVR-350 (CX23415) MPEG decoder will
+	 * accept for VBI data. So, including the headers, it's a maximum 1584
+	 * bytes total.
+	 */
+#define CX18_SLICED_MPEG_DATA_MAXSZ	1584
+	/* copy_vbi_buf() needs 8 temp bytes on the end for the worst case */
+#define CX18_SLICED_MPEG_DATA_BUFSZ	(CX18_SLICED_MPEG_DATA_MAXSZ+8)
+	u8 *sliced_mpeg_data[CX18_VBI_FRAMES];
+	u32 sliced_mpeg_size[CX18_VBI_FRAMES];
+
+	/* Count of Program Pack/Program Stream 1 packets inserted into PS */
+	u32 inserted_frame;
+
+	/*
+	 * A dummy driver stream transfer mdl & buffer with a copy of the next
+	 * sliced_mpeg_data[] buffer for output to userland apps.
+	 * Only used in cx18-fileops.c, but its state needs to persist at times.
+	 */
+	struct cx18_mdl sliced_mpeg_mdl;
+	struct cx18_buffer sliced_mpeg_buf;
+};
+
+/* Per cx23418, per I2C bus private algo callback data */
+struct cx18_i2c_algo_callback_data {
+	struct cx18 *cx;
+	int bus_index;   /* 0 or 1 for the cx23418's 1st or 2nd I2C bus */
+};
+
+#define CX18_MAX_MMIO_WR_RETRIES 10
+
+/* Struct to hold info about cx18 cards */
+struct cx18 {
+	int instance;
+	struct pci_dev *pci_dev;
+	struct v4l2_device v4l2_dev;
+	struct v4l2_subdev *sd_av;     /* A/V decoder/digitizer sub-device */
+	struct v4l2_subdev *sd_extmux; /* External multiplexer sub-dev */
+
+	const struct cx18_card *card;	/* card information */
+	const char *card_name;  /* full name of the card */
+	const struct cx18_card_tuner_i2c *card_i2c; /* i2c addresses to probe for tuner */
+	u8 is_50hz;
+	u8 is_60hz;
+	u8 nof_inputs;		/* number of video inputs */
+	u8 nof_audio_inputs;	/* number of audio inputs */
+	u32 v4l2_cap;		/* V4L2 capabilities of card */
+	u32 hw_flags;		/* Hardware description of the board */
+	unsigned int free_mdl_idx;
+	struct cx18_scb __iomem *scb; /* pointer to SCB */
+	struct mutex epu2apu_mb_lock; /* protect driver to chip mailbox in SCB*/
+	struct mutex epu2cpu_mb_lock; /* protect driver to chip mailbox in SCB*/
+
+	struct cx18_av_state av_state;
+
+	/* codec settings */
+	struct cx2341x_handler cxhdl;
+	u32 filter_mode;
+	u32 temporal_strength;
+	u32 spatial_strength;
+
+	/* dualwatch */
+	unsigned long dualwatch_jiffies;
+	u32 dualwatch_stereo_mode;
+
+	struct mutex serialize_lock;    /* mutex used to serialize open/close/start/stop/ioctl operations */
+	struct cx18_options options;	/* User options */
+	int stream_buffers[CX18_MAX_STREAMS]; /* # of buffers for each stream */
+	int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */
+	struct cx18_stream streams[CX18_MAX_STREAMS];	/* Stream data */
+	struct snd_cx18_card *alsa; /* ALSA interface for PCM capture stream */
+	void (*pcm_announce_callback)(struct snd_cx18_card *card, u8 *pcm_data,
+				      size_t num_bytes);
+
+	unsigned long i_flags;  /* global cx18 flags */
+	atomic_t ana_capturing;	/* count number of active analog capture streams */
+	atomic_t tot_capturing;	/* total count number of active capture streams */
+	int search_pack_header;
+
+	int open_id;		/* incremented each time an open occurs, used as
+				   unique ID. Starts at 1, so 0 can be used as
+				   uninitialized value in the stream->id. */
+
+	resource_size_t base_addr;
+
+	u8 card_rev;
+	void __iomem *enc_mem, *reg_mem;
+
+	struct vbi_info vbi;
+
+	u64 mpg_data_received;
+	u64 vbi_data_inserted;
+
+	wait_queue_head_t mb_apu_waitq;
+	wait_queue_head_t mb_cpu_waitq;
+	wait_queue_head_t cap_w;
+	/* when the current DMA is finished this queue is woken up */
+	wait_queue_head_t dma_waitq;
+
+	u32 sw1_irq_mask;
+	u32 sw2_irq_mask;
+	u32 hw2_irq_mask;
+
+	struct workqueue_struct *in_work_queue;
+	char in_workq_name[11]; /* "cx18-NN-in" */
+	struct cx18_in_work_order in_work_order[CX18_MAX_IN_WORK_ORDERS];
+	char epu_debug_str[256]; /* CX18_EPU_DEBUG is rare: use shared space */
+
+	/* i2c */
+	struct i2c_adapter i2c_adap[2];
+	struct i2c_algo_bit_data i2c_algo[2];
+	struct cx18_i2c_algo_callback_data i2c_algo_cb_data[2];
+
+	struct IR_i2c_init_data ir_i2c_init_data;
+
+	/* gpio */
+	u32 gpio_dir;
+	u32 gpio_val;
+	struct mutex gpio_lock;
+	struct v4l2_subdev sd_gpiomux;
+	struct v4l2_subdev sd_resetctrl;
+
+	/* v4l2 and User settings */
+
+	/* codec settings */
+	u32 audio_input;
+	u32 active_input;
+	v4l2_std_id std;
+	v4l2_std_id tuner_std;	/* The norm of the tuner (fixed) */
+
+	/* Used for cx18-alsa module loading */
+	struct work_struct request_module_wk;
+};
+
+static inline struct cx18 *to_cx18(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct cx18, v4l2_dev);
+}
+
+/* cx18 extensions to be loaded */
+extern int (*cx18_ext_init)(struct cx18 *);
+
+/* Globals */
+extern int cx18_first_minor;
+
+/*==============Prototypes==================*/
+
+/* Return non-zero if a signal is pending */
+int cx18_msleep_timeout(unsigned int msecs, int intr);
+
+/* Read Hauppauge eeprom */
+struct tveeprom; /* forward reference */
+void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv);
+
+/* First-open initialization: load firmware, etc. */
+int cx18_init_on_first_open(struct cx18 *cx);
+
+/* Test if the current VBI mode is raw (1) or sliced (0) */
+static inline int cx18_raw_vbi(const struct cx18 *cx)
+{
+	return cx->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE;
+}
+
+/* Call the specified callback for all subdevs with a grp_id bit matching the
+ * mask in hw (if 0, then match them all). Ignore any errors. */
+#define cx18_call_hw(cx, hw, o, f, args...)				\
+	v4l2_device_mask_call_all(&(cx)->v4l2_dev, hw, o, f, ##args)
+
+#define cx18_call_all(cx, o, f, args...) cx18_call_hw(cx, 0, o, f , ##args)
+
+/* Call the specified callback for all subdevs with a grp_id bit matching the
+ * mask in hw (if 0, then match them all). If the callback returns an error
+ * other than 0 or -ENOIOCTLCMD, then return with that error code. */
+#define cx18_call_hw_err(cx, hw, o, f, args...)				\
+	v4l2_device_mask_call_until_err(&(cx)->v4l2_dev, hw, o, f, ##args)
+
+#define cx18_call_all_err(cx, o, f, args...) \
+	cx18_call_hw_err(cx, 0, o, f , ##args)
+
+#endif /* CX18_DRIVER_H */
diff --git a/drivers/media/pci/cx18/cx18-dvb.c b/drivers/media/pci/cx18/cx18-dvb.c
new file mode 100644
index 000000000..a3a7f7065
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-dvb.c
@@ -0,0 +1,603 @@
+/*
+ *  cx18 functions for DVB support
+ *
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-version.h"
+#include "cx18-dvb.h"
+#include "cx18-io.h"
+#include "cx18-queue.h"
+#include "cx18-streams.h"
+#include "cx18-cards.h"
+#include "cx18-gpio.h"
+#include "s5h1409.h"
+#include "mxl5005s.h"
+#include "s5h1411.h"
+#include "tda18271.h"
+#include "zl10353.h"
+
+#include <linux/firmware.h>
+#include "mt352.h"
+#include "mt352_priv.h"
+#include "tuner-xc2028.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define FWFILE "dvb-cx18-mpc718-mt352.fw"
+
+#define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000
+#define CX18_CLOCK_ENABLE2		 0xc71024
+#define CX18_DMUX_CLK_MASK		 0x0080
+
+/*
+ * CX18_CARD_HVR_1600_ESMT
+ * CX18_CARD_HVR_1600_SAMSUNG
+ */
+
+static struct mxl5005s_config hauppauge_hvr1600_tuner = {
+	.i2c_address     = 0xC6 >> 1,
+	.if_freq         = IF_FREQ_5380000HZ,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_C_H,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.qam_gain        = 0x02,
+	.AgcMasterByte   = 0x00,
+};
+
+static struct s5h1409_config hauppauge_hvr1600_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_ON,
+	.qam_if        = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+	.hvr1600_opt   = S5H1409_HVR1600_OPTIMIZE
+};
+
+/*
+ * CX18_CARD_HVR_1600_S5H1411
+ */
+static struct s5h1411_config hcw_s5h1411_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_OFF,
+	.vsb_if        = S5H1411_IF_44000,
+	.qam_if        = S5H1411_IF_4000,
+	.inversion     = S5H1411_INVERSION_ON,
+	.status_mode   = S5H1411_DEMODLOCKING,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+	.atsc_6   = { .if_freq = 5380, .agc_mode = 3, .std = 3,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+};
+
+static struct tda18271_config hauppauge_tda18271_config = {
+	.std_map = &hauppauge_tda18271_std_map,
+	.gate    = TDA18271_GATE_DIGITAL,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+/*
+ * CX18_CARD_LEADTEK_DVR3100H
+ */
+/* Information/confirmation of proper config values provided by Terry Wu */
+static struct zl10353_config leadtek_dvr3100h_demod = {
+	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
+	.if2                   = 45600,     /* 4.560 MHz IF from the XC3028 */
+	.parallel_ts           = 1,         /* Not a serial TS */
+	.no_tuner              = 1,         /* XC3028 is not behind the gate */
+	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
+};
+
+/*
+ * CX18_CARD_YUAN_MPC718
+ */
+/*
+ * Due to
+ *
+ * 1. an absence of information on how to prgram the MT352
+ * 2. the Linux mt352 module pushing MT352 initialzation off onto us here
+ *
+ * We have to use an init sequence that *you* must extract from the Windows
+ * driver (yuanrap.sys) and which we load as a firmware.
+ *
+ * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual
+ * with chip programming details, then I can remove this annoyance.
+ */
+static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream,
+				   const struct firmware **fw)
+{
+	struct cx18 *cx = stream->cx;
+	const char *fn = FWFILE;
+	int ret;
+
+	ret = request_firmware(fw, fn, &cx->pci_dev->dev);
+	if (ret)
+		CX18_ERR("Unable to open firmware file %s\n", fn);
+	else {
+		size_t sz = (*fw)->size;
+		if (sz < 2 || sz > 64 || (sz % 2) != 0) {
+			CX18_ERR("Firmware %s has a bad size: %lu bytes\n",
+				 fn, (unsigned long) sz);
+			ret = -EILSEQ;
+			release_firmware(*fw);
+			*fw = NULL;
+		}
+	}
+
+	if (ret) {
+		CX18_ERR("The MPC718 board variant with the MT352 DVB-T demodulator will not work without it\n");
+		CX18_ERR("Run 'linux/scripts/get_dvb_firmware mpc718' if you need the firmware\n");
+	}
+	return ret;
+}
+
+static int yuan_mpc718_mt352_init(struct dvb_frontend *fe)
+{
+	struct cx18_dvb *dvb = container_of(fe->dvb,
+					    struct cx18_dvb, dvb_adapter);
+	struct cx18_stream *stream = dvb->stream;
+	const struct firmware *fw = NULL;
+	int ret;
+	int i;
+	u8 buf[3];
+
+	ret = yuan_mpc718_mt352_reqfw(stream, &fw);
+	if (ret)
+		return ret;
+
+	/* Loop through all the register-value pairs in the firmware file */
+	for (i = 0; i < fw->size; i += 2) {
+		buf[0] = fw->data[i];
+		/* Intercept a few registers we want to set ourselves */
+		switch (buf[0]) {
+		case TRL_NOMINAL_RATE_0:
+			/* Set our custom OFDM bandwidth in the case below */
+			break;
+		case TRL_NOMINAL_RATE_1:
+			/* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */
+			/* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */
+			/* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */
+			buf[1] = 0x72;
+			buf[2] = 0x49;
+			mt352_write(fe, buf, 3);
+			break;
+		case INPUT_FREQ_0:
+			/* Set our custom IF in the case below */
+			break;
+		case INPUT_FREQ_1:
+			/* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */
+			buf[1] = 0x31;
+			buf[2] = 0xc0;
+			mt352_write(fe, buf, 3);
+			break;
+		default:
+			/* Pass through the register-value pair from the fw */
+			buf[1] = fw->data[i+1];
+			mt352_write(fe, buf, 2);
+			break;
+		}
+	}
+
+	buf[0] = (u8) TUNER_GO;
+	buf[1] = 0x01; /* Go */
+	mt352_write(fe, buf, 2);
+	release_firmware(fw);
+	return 0;
+}
+
+static struct mt352_config yuan_mpc718_mt352_demod = {
+	.demod_address = 0x1e >> 1,
+	.adc_clock     = 20480,     /* 20.480 MHz */
+	.if2           =  4560,     /*  4.560 MHz */
+	.no_tuner      = 1,         /* XC3028 is not behind the gate */
+	.demod_init    = yuan_mpc718_mt352_init,
+};
+
+static struct zl10353_config yuan_mpc718_zl10353_demod = {
+	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
+	.if2                   = 45600,     /* 4.560 MHz IF from the XC3028 */
+	.parallel_ts           = 1,         /* Not a serial TS */
+	.no_tuner              = 1,         /* XC3028 is not behind the gate */
+	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
+};
+
+static struct zl10353_config gotview_dvd3_zl10353_demod = {
+	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
+	.if2                   = 45600,     /* 4.560 MHz IF from the XC3028 */
+	.parallel_ts           = 1,         /* Not a serial TS */
+	.no_tuner              = 1,         /* XC3028 is not behind the gate */
+	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
+};
+
+static int dvb_register(struct cx18_stream *stream);
+
+/* Kernel DVB framework calls this when the feed needs to start.
+ * The CX18 framework should enable the transport DMA handling
+ * and queue processing.
+ */
+static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
+{
+	struct dvb_demux *demux = feed->demux;
+	struct cx18_stream *stream = (struct cx18_stream *) demux->priv;
+	struct cx18 *cx;
+	int ret;
+	u32 v;
+
+	if (!stream)
+		return -EINVAL;
+
+	cx = stream->cx;
+	CX18_DEBUG_INFO("Start feed: pid = 0x%x index = %d\n",
+			feed->pid, feed->index);
+
+	mutex_lock(&cx->serialize_lock);
+	ret = cx18_init_on_first_open(cx);
+	mutex_unlock(&cx->serialize_lock);
+	if (ret) {
+		CX18_ERR("Failed to initialize firmware starting DVB feed\n");
+		return ret;
+	}
+	ret = -EINVAL;
+
+	switch (cx->card->type) {
+	case CX18_CARD_HVR_1600_ESMT:
+	case CX18_CARD_HVR_1600_SAMSUNG:
+	case CX18_CARD_HVR_1600_S5H1411:
+		v = cx18_read_reg(cx, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
+		v |= 0x00400000; /* Serial Mode */
+		v |= 0x00002000; /* Data Length - Byte */
+		v |= 0x00010000; /* Error - Polarity */
+		v |= 0x00020000; /* Error - Passthru */
+		v |= 0x000c0000; /* Error - Ignore */
+		cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
+		break;
+
+	case CX18_CARD_LEADTEK_DVR3100H:
+	case CX18_CARD_YUAN_MPC718:
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
+	default:
+		/* Assumption - Parallel transport - Signalling
+		 * undefined or default.
+		 */
+		break;
+	}
+
+	if (!demux->dmx.frontend)
+		return -EINVAL;
+
+	mutex_lock(&stream->dvb->feedlock);
+	if (stream->dvb->feeding++ == 0) {
+		CX18_DEBUG_INFO("Starting Transport DMA\n");
+		mutex_lock(&cx->serialize_lock);
+		set_bit(CX18_F_S_STREAMING, &stream->s_flags);
+		ret = cx18_start_v4l2_encode_stream(stream);
+		if (ret < 0) {
+			CX18_DEBUG_INFO("Failed to start Transport DMA\n");
+			stream->dvb->feeding--;
+			if (stream->dvb->feeding == 0)
+				clear_bit(CX18_F_S_STREAMING, &stream->s_flags);
+		}
+		mutex_unlock(&cx->serialize_lock);
+	} else
+		ret = 0;
+	mutex_unlock(&stream->dvb->feedlock);
+
+	return ret;
+}
+
+/* Kernel DVB framework calls this when the feed needs to stop. */
+static int cx18_dvb_stop_feed(struct dvb_demux_feed *feed)
+{
+	struct dvb_demux *demux = feed->demux;
+	struct cx18_stream *stream = (struct cx18_stream *)demux->priv;
+	struct cx18 *cx;
+	int ret = -EINVAL;
+
+	if (stream) {
+		cx = stream->cx;
+		CX18_DEBUG_INFO("Stop feed: pid = 0x%x index = %d\n",
+				feed->pid, feed->index);
+
+		mutex_lock(&stream->dvb->feedlock);
+		if (--stream->dvb->feeding == 0) {
+			CX18_DEBUG_INFO("Stopping Transport DMA\n");
+			mutex_lock(&cx->serialize_lock);
+			ret = cx18_stop_v4l2_encode_stream(stream, 0);
+			mutex_unlock(&cx->serialize_lock);
+		} else
+			ret = 0;
+		mutex_unlock(&stream->dvb->feedlock);
+	}
+
+	return ret;
+}
+
+int cx18_dvb_register(struct cx18_stream *stream)
+{
+	struct cx18 *cx = stream->cx;
+	struct cx18_dvb *dvb = stream->dvb;
+	struct dvb_adapter *dvb_adapter;
+	struct dvb_demux *dvbdemux;
+	struct dmx_demux *dmx;
+	int ret;
+
+	if (!dvb)
+		return -EINVAL;
+
+	dvb->enabled = 0;
+	dvb->stream = stream;
+
+	ret = dvb_register_adapter(&dvb->dvb_adapter,
+			CX18_DRIVER_NAME,
+			THIS_MODULE, &cx->pci_dev->dev, adapter_nr);
+	if (ret < 0)
+		goto err_out;
+
+	dvb_adapter = &dvb->dvb_adapter;
+
+	dvbdemux = &dvb->demux;
+
+	dvbdemux->priv = (void *)stream;
+
+	dvbdemux->filternum = 256;
+	dvbdemux->feednum = 256;
+	dvbdemux->start_feed = cx18_dvb_start_feed;
+	dvbdemux->stop_feed = cx18_dvb_stop_feed;
+	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
+		DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
+	ret = dvb_dmx_init(dvbdemux);
+	if (ret < 0)
+		goto err_dvb_unregister_adapter;
+
+	dmx = &dvbdemux->dmx;
+
+	dvb->hw_frontend.source = DMX_FRONTEND_0;
+	dvb->mem_frontend.source = DMX_MEMORY_FE;
+	dvb->dmxdev.filternum = 256;
+	dvb->dmxdev.demux = dmx;
+
+	ret = dvb_dmxdev_init(&dvb->dmxdev, dvb_adapter);
+	if (ret < 0)
+		goto err_dvb_dmx_release;
+
+	ret = dmx->add_frontend(dmx, &dvb->hw_frontend);
+	if (ret < 0)
+		goto err_dvb_dmxdev_release;
+
+	ret = dmx->add_frontend(dmx, &dvb->mem_frontend);
+	if (ret < 0)
+		goto err_remove_hw_frontend;
+
+	ret = dmx->connect_frontend(dmx, &dvb->hw_frontend);
+	if (ret < 0)
+		goto err_remove_mem_frontend;
+
+	ret = dvb_register(stream);
+	if (ret < 0)
+		goto err_disconnect_frontend;
+
+	dvb_net_init(dvb_adapter, &dvb->dvbnet, dmx);
+
+	CX18_INFO("DVB Frontend registered\n");
+	CX18_INFO("Registered DVB adapter%d for %s (%d x %d.%02d kB)\n",
+		  stream->dvb->dvb_adapter.num, stream->name,
+		  stream->buffers, stream->buf_size/1024,
+		  (stream->buf_size * 100 / 1024) % 100);
+
+	mutex_init(&dvb->feedlock);
+	dvb->enabled = 1;
+	return ret;
+
+err_disconnect_frontend:
+	dmx->disconnect_frontend(dmx);
+err_remove_mem_frontend:
+	dmx->remove_frontend(dmx, &dvb->mem_frontend);
+err_remove_hw_frontend:
+	dmx->remove_frontend(dmx, &dvb->hw_frontend);
+err_dvb_dmxdev_release:
+	dvb_dmxdev_release(&dvb->dmxdev);
+err_dvb_dmx_release:
+	dvb_dmx_release(dvbdemux);
+err_dvb_unregister_adapter:
+	dvb_unregister_adapter(dvb_adapter);
+err_out:
+	return ret;
+}
+
+void cx18_dvb_unregister(struct cx18_stream *stream)
+{
+	struct cx18 *cx = stream->cx;
+	struct cx18_dvb *dvb = stream->dvb;
+	struct dvb_adapter *dvb_adapter;
+	struct dvb_demux *dvbdemux;
+	struct dmx_demux *dmx;
+
+	CX18_INFO("unregister DVB\n");
+
+	if (dvb == NULL || !dvb->enabled)
+		return;
+
+	dvb_adapter = &dvb->dvb_adapter;
+	dvbdemux = &dvb->demux;
+	dmx = &dvbdemux->dmx;
+
+	dmx->close(dmx);
+	dvb_net_release(&dvb->dvbnet);
+	dmx->remove_frontend(dmx, &dvb->mem_frontend);
+	dmx->remove_frontend(dmx, &dvb->hw_frontend);
+	dvb_dmxdev_release(&dvb->dmxdev);
+	dvb_dmx_release(dvbdemux);
+	dvb_unregister_frontend(dvb->fe);
+	dvb_frontend_detach(dvb->fe);
+	dvb_unregister_adapter(dvb_adapter);
+}
+
+/* All the DVB attach calls go here, this function get's modified
+ * for each new card. cx18_dvb_start_feed() will also need changes.
+ */
+static int dvb_register(struct cx18_stream *stream)
+{
+	struct cx18_dvb *dvb = stream->dvb;
+	struct cx18 *cx = stream->cx;
+	int ret = 0;
+
+	switch (cx->card->type) {
+	case CX18_CARD_HVR_1600_ESMT:
+	case CX18_CARD_HVR_1600_SAMSUNG:
+		dvb->fe = dvb_attach(s5h1409_attach,
+			&hauppauge_hvr1600_config,
+			&cx->i2c_adap[0]);
+		if (dvb->fe != NULL) {
+			dvb_attach(mxl5005s_attach, dvb->fe,
+				&cx->i2c_adap[0],
+				&hauppauge_hvr1600_tuner);
+			ret = 0;
+		}
+		break;
+	case CX18_CARD_HVR_1600_S5H1411:
+		dvb->fe = dvb_attach(s5h1411_attach,
+				     &hcw_s5h1411_config,
+				     &cx->i2c_adap[0]);
+		if (dvb->fe != NULL)
+			dvb_attach(tda18271_attach, dvb->fe,
+				   0x60, &cx->i2c_adap[0],
+				   &hauppauge_tda18271_config);
+		break;
+	case CX18_CARD_LEADTEK_DVR3100H:
+		dvb->fe = dvb_attach(zl10353_attach,
+				     &leadtek_dvr3100h_demod,
+				     &cx->i2c_adap[1]);
+		if (dvb->fe != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap = &cx->i2c_adap[1],
+				.i2c_addr = 0xc2 >> 1,
+				.ctrl = NULL,
+			};
+			static struct xc2028_ctrl ctrl = {
+				.fname   = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_ZARLINK456,
+				.type    = XC2028_AUTO,
+			};
+
+			fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctrl);
+		}
+		break;
+	case CX18_CARD_YUAN_MPC718:
+		/*
+		 * TODO
+		 * Apparently, these cards also could instead have a
+		 * DiBcom demod supported by one of the db7000 drivers
+		 */
+		dvb->fe = dvb_attach(mt352_attach,
+				     &yuan_mpc718_mt352_demod,
+				     &cx->i2c_adap[1]);
+		if (dvb->fe == NULL)
+			dvb->fe = dvb_attach(zl10353_attach,
+					     &yuan_mpc718_zl10353_demod,
+					     &cx->i2c_adap[1]);
+		if (dvb->fe != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap = &cx->i2c_adap[1],
+				.i2c_addr = 0xc2 >> 1,
+				.ctrl = NULL,
+			};
+			static struct xc2028_ctrl ctrl = {
+				.fname   = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_ZARLINK456,
+				.type    = XC2028_AUTO,
+			};
+
+			fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctrl);
+		}
+		break;
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
+			dvb->fe = dvb_attach(zl10353_attach,
+					     &gotview_dvd3_zl10353_demod,
+					     &cx->i2c_adap[1]);
+		if (dvb->fe != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap = &cx->i2c_adap[1],
+				.i2c_addr = 0xc2 >> 1,
+				.ctrl = NULL,
+			};
+			static struct xc2028_ctrl ctrl = {
+				.fname   = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_ZARLINK456,
+				.type    = XC2028_AUTO,
+			};
+
+			fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctrl);
+		}
+		break;
+	default:
+		/* No Digital Tv Support */
+		break;
+	}
+
+	if (dvb->fe == NULL) {
+		CX18_ERR("frontend initialization failed\n");
+		return -1;
+	}
+
+	dvb->fe->callback = cx18_reset_tuner_gpio;
+
+	ret = dvb_register_frontend(&dvb->dvb_adapter, dvb->fe);
+	if (ret < 0) {
+		if (dvb->fe->ops.release)
+			dvb->fe->ops.release(dvb->fe);
+		return ret;
+	}
+
+	/*
+	 * The firmware seems to enable the TS DMUX clock
+	 * under various circumstances.  However, since we know we
+	 * might use it, let's just turn it on ourselves here.
+	 */
+	cx18_write_reg_expect(cx,
+			      (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK,
+			      CX18_CLOCK_ENABLE2,
+			      CX18_DMUX_CLK_MASK,
+			      (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK);
+
+	return ret;
+}
+
+MODULE_FIRMWARE(FWFILE);
diff --git a/drivers/media/pci/cx18/cx18-dvb.h b/drivers/media/pci/cx18/cx18-dvb.h
new file mode 100644
index 000000000..33dfc53e3
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-dvb.h
@@ -0,0 +1,21 @@
+/*
+ *  cx18 functions for DVB support
+ *
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+
+int cx18_dvb_register(struct cx18_stream *stream);
+void cx18_dvb_unregister(struct cx18_stream *stream);
diff --git a/drivers/media/pci/cx18/cx18-fileops.c b/drivers/media/pci/cx18/cx18-fileops.c
new file mode 100644
index 000000000..88c2f3bea
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-fileops.c
@@ -0,0 +1,883 @@
+/*
+ *  cx18 file operation functions
+ *
+ *  Derived from ivtv-fileops.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-fileops.h"
+#include "cx18-i2c.h"
+#include "cx18-queue.h"
+#include "cx18-vbi.h"
+#include "cx18-audio.h"
+#include "cx18-mailbox.h"
+#include "cx18-scb.h"
+#include "cx18-streams.h"
+#include "cx18-controls.h"
+#include "cx18-ioctl.h"
+#include "cx18-cards.h"
+#include <media/v4l2-event.h>
+
+/* This function tries to claim the stream for a specific file descriptor.
+   If no one else is using this stream then the stream is claimed and
+   associated VBI and IDX streams are also automatically claimed.
+   Possible error returns: -EBUSY if someone else has claimed
+   the stream or 0 on success. */
+int cx18_claim_stream(struct cx18_open_id *id, int type)
+{
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[type];
+	struct cx18_stream *s_assoc;
+
+	/* Nothing should ever try to directly claim the IDX stream */
+	if (type == CX18_ENC_STREAM_TYPE_IDX) {
+		CX18_WARN("MPEG Index stream cannot be claimed directly, but something tried.\n");
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(CX18_F_S_CLAIMED, &s->s_flags)) {
+		/* someone already claimed this stream */
+		if (s->id == id->open_id) {
+			/* yes, this file descriptor did. So that's OK. */
+			return 0;
+		}
+		if (s->id == -1 && type == CX18_ENC_STREAM_TYPE_VBI) {
+			/* VBI is handled already internally, now also assign
+			   the file descriptor to this stream for external
+			   reading of the stream. */
+			s->id = id->open_id;
+			CX18_DEBUG_INFO("Start Read VBI\n");
+			return 0;
+		}
+		/* someone else is using this stream already */
+		CX18_DEBUG_INFO("Stream %d is busy\n", type);
+		return -EBUSY;
+	}
+	s->id = id->open_id;
+
+	/*
+	 * CX18_ENC_STREAM_TYPE_MPG needs to claim:
+	 * CX18_ENC_STREAM_TYPE_VBI, if VBI insertion is on for sliced VBI, or
+	 * CX18_ENC_STREAM_TYPE_IDX, if VBI insertion is off for sliced VBI
+	 * (We don't yet fix up MPEG Index entries for our inserted packets).
+	 *
+	 * For all other streams we're done.
+	 */
+	if (type != CX18_ENC_STREAM_TYPE_MPG)
+		return 0;
+
+	s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+	if (cx->vbi.insert_mpeg && !cx18_raw_vbi(cx))
+		s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
+	else if (!cx18_stream_enabled(s_assoc))
+		return 0;
+
+	set_bit(CX18_F_S_CLAIMED, &s_assoc->s_flags);
+
+	/* mark that it is used internally */
+	set_bit(CX18_F_S_INTERNAL_USE, &s_assoc->s_flags);
+	return 0;
+}
+EXPORT_SYMBOL(cx18_claim_stream);
+
+/* This function releases a previously claimed stream. It will take into
+   account associated VBI streams. */
+void cx18_release_stream(struct cx18_stream *s)
+{
+	struct cx18 *cx = s->cx;
+	struct cx18_stream *s_assoc;
+
+	s->id = -1;
+	if (s->type == CX18_ENC_STREAM_TYPE_IDX) {
+		/*
+		 * The IDX stream is only used internally, and can
+		 * only be indirectly unclaimed by unclaiming the MPG stream.
+		 */
+		return;
+	}
+
+	if (s->type == CX18_ENC_STREAM_TYPE_VBI &&
+		test_bit(CX18_F_S_INTERNAL_USE, &s->s_flags)) {
+		/* this stream is still in use internally */
+		return;
+	}
+	if (!test_and_clear_bit(CX18_F_S_CLAIMED, &s->s_flags)) {
+		CX18_DEBUG_WARN("Release stream %s not in use!\n", s->name);
+		return;
+	}
+
+	cx18_flush_queues(s);
+
+	/*
+	 * CX18_ENC_STREAM_TYPE_MPG needs to release the
+	 * CX18_ENC_STREAM_TYPE_VBI and/or CX18_ENC_STREAM_TYPE_IDX streams.
+	 *
+	 * For all other streams we're done.
+	 */
+	if (s->type != CX18_ENC_STREAM_TYPE_MPG)
+		return;
+
+	/* Unclaim the associated MPEG Index stream */
+	s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+	if (test_and_clear_bit(CX18_F_S_INTERNAL_USE, &s_assoc->s_flags)) {
+		clear_bit(CX18_F_S_CLAIMED, &s_assoc->s_flags);
+		cx18_flush_queues(s_assoc);
+	}
+
+	/* Unclaim the associated VBI stream */
+	s_assoc = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
+	if (test_and_clear_bit(CX18_F_S_INTERNAL_USE, &s_assoc->s_flags)) {
+		if (s_assoc->id == -1) {
+			/*
+			 * The VBI stream is not still claimed by a file
+			 * descriptor, so completely unclaim it.
+			 */
+			clear_bit(CX18_F_S_CLAIMED, &s_assoc->s_flags);
+			cx18_flush_queues(s_assoc);
+		}
+	}
+}
+EXPORT_SYMBOL(cx18_release_stream);
+
+static void cx18_dualwatch(struct cx18 *cx)
+{
+	struct v4l2_tuner vt;
+	u32 new_stereo_mode;
+	const u32 dual = 0x0200;
+
+	new_stereo_mode = v4l2_ctrl_g_ctrl(cx->cxhdl.audio_mode);
+	memset(&vt, 0, sizeof(vt));
+	cx18_call_all(cx, tuner, g_tuner, &vt);
+	if (vt.audmode == V4L2_TUNER_MODE_LANG1_LANG2 &&
+			(vt.rxsubchans & V4L2_TUNER_SUB_LANG2))
+		new_stereo_mode = dual;
+
+	if (new_stereo_mode == cx->dualwatch_stereo_mode)
+		return;
+
+	CX18_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x.\n",
+			   cx->dualwatch_stereo_mode, new_stereo_mode);
+	if (v4l2_ctrl_s_ctrl(cx->cxhdl.audio_mode, new_stereo_mode))
+		CX18_DEBUG_INFO("dualwatch: changing stereo flag failed\n");
+}
+
+
+static struct cx18_mdl *cx18_get_mdl(struct cx18_stream *s, int non_block,
+				     int *err)
+{
+	struct cx18 *cx = s->cx;
+	struct cx18_stream *s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
+	struct cx18_mdl *mdl;
+	DEFINE_WAIT(wait);
+
+	*err = 0;
+	while (1) {
+		if (s->type == CX18_ENC_STREAM_TYPE_MPG) {
+			/* Process pending program updates and VBI data */
+			if (time_after(jiffies, cx->dualwatch_jiffies + msecs_to_jiffies(1000))) {
+				cx->dualwatch_jiffies = jiffies;
+				cx18_dualwatch(cx);
+			}
+			if (test_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags) &&
+			    !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) {
+				while ((mdl = cx18_dequeue(s_vbi,
+							   &s_vbi->q_full))) {
+					/* byteswap and process VBI data */
+					cx18_process_vbi_data(cx, mdl,
+							      s_vbi->type);
+					cx18_stream_put_mdl_fw(s_vbi, mdl);
+				}
+			}
+			mdl = &cx->vbi.sliced_mpeg_mdl;
+			if (mdl->readpos != mdl->bytesused)
+				return mdl;
+		}
+
+		/* do we have new data? */
+		mdl = cx18_dequeue(s, &s->q_full);
+		if (mdl) {
+			if (!test_and_clear_bit(CX18_F_M_NEED_SWAP,
+						&mdl->m_flags))
+				return mdl;
+			if (s->type == CX18_ENC_STREAM_TYPE_MPG)
+				/* byteswap MPG data */
+				cx18_mdl_swap(mdl);
+			else {
+				/* byteswap and process VBI data */
+				cx18_process_vbi_data(cx, mdl, s->type);
+			}
+			return mdl;
+		}
+
+		/* return if end of stream */
+		if (!test_bit(CX18_F_S_STREAMING, &s->s_flags)) {
+			CX18_DEBUG_INFO("EOS %s\n", s->name);
+			return NULL;
+		}
+
+		/* return if file was opened with O_NONBLOCK */
+		if (non_block) {
+			*err = -EAGAIN;
+			return NULL;
+		}
+
+		/* wait for more data to arrive */
+		prepare_to_wait(&s->waitq, &wait, TASK_INTERRUPTIBLE);
+		/* New buffers might have become available before we were added
+		   to the waitqueue */
+		if (!atomic_read(&s->q_full.depth))
+			schedule();
+		finish_wait(&s->waitq, &wait);
+		if (signal_pending(current)) {
+			/* return if a signal was received */
+			CX18_DEBUG_INFO("User stopped %s\n", s->name);
+			*err = -EINTR;
+			return NULL;
+		}
+	}
+}
+
+static void cx18_setup_sliced_vbi_mdl(struct cx18 *cx)
+{
+	struct cx18_mdl *mdl = &cx->vbi.sliced_mpeg_mdl;
+	struct cx18_buffer *buf = &cx->vbi.sliced_mpeg_buf;
+	int idx = cx->vbi.inserted_frame % CX18_VBI_FRAMES;
+
+	buf->buf = cx->vbi.sliced_mpeg_data[idx];
+	buf->bytesused = cx->vbi.sliced_mpeg_size[idx];
+	buf->readpos = 0;
+
+	mdl->curr_buf = NULL;
+	mdl->bytesused = cx->vbi.sliced_mpeg_size[idx];
+	mdl->readpos = 0;
+}
+
+static size_t cx18_copy_buf_to_user(struct cx18_stream *s,
+	struct cx18_buffer *buf, char __user *ubuf, size_t ucount, bool *stop)
+{
+	struct cx18 *cx = s->cx;
+	size_t len = buf->bytesused - buf->readpos;
+
+	*stop = false;
+	if (len > ucount)
+		len = ucount;
+	if (cx->vbi.insert_mpeg && s->type == CX18_ENC_STREAM_TYPE_MPG &&
+	    !cx18_raw_vbi(cx) && buf != &cx->vbi.sliced_mpeg_buf) {
+		/*
+		 * Try to find a good splice point in the PS, just before
+		 * an MPEG-2 Program Pack start code, and provide only
+		 * up to that point to the user, so it's easy to insert VBI data
+		 * the next time around.
+		 *
+		 * This will not work for an MPEG-2 TS and has only been
+		 * verified by analysis to work for an MPEG-2 PS.  Helen Buus
+		 * pointed out this works for the CX23416 MPEG-2 DVD compatible
+		 * stream, and research indicates both the MPEG 2 SVCD and DVD
+		 * stream types use an MPEG-2 PS container.
+		 */
+		/*
+		 * An MPEG-2 Program Stream (PS) is a series of
+		 * MPEG-2 Program Packs terminated by an
+		 * MPEG Program End Code after the last Program Pack.
+		 * A Program Pack may hold a PS System Header packet and any
+		 * number of Program Elementary Stream (PES) Packets
+		 */
+		const char *start = buf->buf + buf->readpos;
+		const char *p = start + 1;
+		const u8 *q;
+		u8 ch = cx->search_pack_header ? 0xba : 0xe0;
+		int stuffing, i;
+
+		while (start + len > p) {
+			/* Scan for a 0 to find a potential MPEG-2 start code */
+			q = memchr(p, 0, start + len - p);
+			if (q == NULL)
+				break;
+			p = q + 1;
+			/*
+			 * Keep looking if not a
+			 * MPEG-2 Pack header start code:  0x00 0x00 0x01 0xba
+			 * or MPEG-2 video PES start code: 0x00 0x00 0x01 0xe0
+			 */
+			if ((char *)q + 15 >= buf->buf + buf->bytesused ||
+			    q[1] != 0 || q[2] != 1 || q[3] != ch)
+				continue;
+
+			/* If expecting the primary video PES */
+			if (!cx->search_pack_header) {
+				/* Continue if it couldn't be a PES packet */
+				if ((q[6] & 0xc0) != 0x80)
+					continue;
+				/* Check if a PTS or PTS & DTS follow */
+				if (((q[7] & 0xc0) == 0x80 &&  /* PTS only */
+				     (q[9] & 0xf0) == 0x20) || /* PTS only */
+				    ((q[7] & 0xc0) == 0xc0 &&  /* PTS & DTS */
+				     (q[9] & 0xf0) == 0x30)) { /* DTS follows */
+					/* Assume we found the video PES hdr */
+					ch = 0xba; /* next want a Program Pack*/
+					cx->search_pack_header = 1;
+					p = q + 9; /* Skip this video PES hdr */
+				}
+				continue;
+			}
+
+			/* We may have found a Program Pack start code */
+
+			/* Get the count of stuffing bytes & verify them */
+			stuffing = q[13] & 7;
+			/* all stuffing bytes must be 0xff */
+			for (i = 0; i < stuffing; i++)
+				if (q[14 + i] != 0xff)
+					break;
+			if (i == stuffing && /* right number of stuffing bytes*/
+			    (q[4] & 0xc4) == 0x44 && /* marker check */
+			    (q[12] & 3) == 3 &&  /* marker check */
+			    q[14 + stuffing] == 0 && /* PES Pack or Sys Hdr */
+			    q[15 + stuffing] == 0 &&
+			    q[16 + stuffing] == 1) {
+				/* We declare we actually found a Program Pack*/
+				cx->search_pack_header = 0; /* expect vid PES */
+				len = (char *)q - start;
+				cx18_setup_sliced_vbi_mdl(cx);
+				*stop = true;
+				break;
+			}
+		}
+	}
+	if (copy_to_user(ubuf, (u8 *)buf->buf + buf->readpos, len)) {
+		CX18_DEBUG_WARN("copy %zd bytes to user failed for %s\n",
+				len, s->name);
+		return -EFAULT;
+	}
+	buf->readpos += len;
+	if (s->type == CX18_ENC_STREAM_TYPE_MPG &&
+	    buf != &cx->vbi.sliced_mpeg_buf)
+		cx->mpg_data_received += len;
+	return len;
+}
+
+static size_t cx18_copy_mdl_to_user(struct cx18_stream *s,
+		struct cx18_mdl *mdl, char __user *ubuf, size_t ucount)
+{
+	size_t tot_written = 0;
+	int rc;
+	bool stop = false;
+
+	if (mdl->curr_buf == NULL)
+		mdl->curr_buf = list_first_entry(&mdl->buf_list,
+						 struct cx18_buffer, list);
+
+	if (list_entry_is_past_end(mdl->curr_buf, &mdl->buf_list, list)) {
+		/*
+		 * For some reason we've exhausted the buffers, but the MDL
+		 * object still said some data was unread.
+		 * Fix that and bail out.
+		 */
+		mdl->readpos = mdl->bytesused;
+		return 0;
+	}
+
+	list_for_each_entry_from(mdl->curr_buf, &mdl->buf_list, list) {
+
+		if (mdl->curr_buf->readpos >= mdl->curr_buf->bytesused)
+			continue;
+
+		rc = cx18_copy_buf_to_user(s, mdl->curr_buf, ubuf + tot_written,
+					   ucount - tot_written, &stop);
+		if (rc < 0)
+			return rc;
+		mdl->readpos += rc;
+		tot_written += rc;
+
+		if (stop ||	/* Forced stopping point for VBI insertion */
+		    tot_written >= ucount ||	/* Reader request statisfied */
+		    mdl->curr_buf->readpos < mdl->curr_buf->bytesused ||
+		    mdl->readpos >= mdl->bytesused) /* MDL buffers drained */
+			break;
+	}
+	return tot_written;
+}
+
+static ssize_t cx18_read(struct cx18_stream *s, char __user *ubuf,
+		size_t tot_count, int non_block)
+{
+	struct cx18 *cx = s->cx;
+	size_t tot_written = 0;
+	int single_frame = 0;
+
+	if (atomic_read(&cx->ana_capturing) == 0 && s->id == -1) {
+		/* shouldn't happen */
+		CX18_DEBUG_WARN("Stream %s not initialized before read\n",
+				s->name);
+		return -EIO;
+	}
+
+	/* Each VBI buffer is one frame, the v4l2 API says that for VBI the
+	   frames should arrive one-by-one, so make sure we never output more
+	   than one VBI frame at a time */
+	if (s->type == CX18_ENC_STREAM_TYPE_VBI && !cx18_raw_vbi(cx))
+		single_frame = 1;
+
+	for (;;) {
+		struct cx18_mdl *mdl;
+		int rc;
+
+		mdl = cx18_get_mdl(s, non_block, &rc);
+		/* if there is no data available... */
+		if (mdl == NULL) {
+			/* if we got data, then return that regardless */
+			if (tot_written)
+				break;
+			/* EOS condition */
+			if (rc == 0) {
+				clear_bit(CX18_F_S_STREAMOFF, &s->s_flags);
+				clear_bit(CX18_F_S_APPL_IO, &s->s_flags);
+				cx18_release_stream(s);
+			}
+			/* set errno */
+			return rc;
+		}
+
+		rc = cx18_copy_mdl_to_user(s, mdl, ubuf + tot_written,
+				tot_count - tot_written);
+
+		if (mdl != &cx->vbi.sliced_mpeg_mdl) {
+			if (mdl->readpos == mdl->bytesused)
+				cx18_stream_put_mdl_fw(s, mdl);
+			else
+				cx18_push(s, mdl, &s->q_full);
+		} else if (mdl->readpos == mdl->bytesused) {
+			int idx = cx->vbi.inserted_frame % CX18_VBI_FRAMES;
+
+			cx->vbi.sliced_mpeg_size[idx] = 0;
+			cx->vbi.inserted_frame++;
+			cx->vbi_data_inserted += mdl->bytesused;
+		}
+		if (rc < 0)
+			return rc;
+		tot_written += rc;
+
+		if (tot_written == tot_count || single_frame)
+			break;
+	}
+	return tot_written;
+}
+
+static ssize_t cx18_read_pos(struct cx18_stream *s, char __user *ubuf,
+		size_t count, loff_t *pos, int non_block)
+{
+	ssize_t rc = count ? cx18_read(s, ubuf, count, non_block) : 0;
+	struct cx18 *cx = s->cx;
+
+	CX18_DEBUG_HI_FILE("read %zd from %s, got %zd\n", count, s->name, rc);
+	if (rc > 0)
+		*pos += rc;
+	return rc;
+}
+
+int cx18_start_capture(struct cx18_open_id *id)
+{
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+	struct cx18_stream *s_vbi;
+	struct cx18_stream *s_idx;
+
+	if (s->type == CX18_ENC_STREAM_TYPE_RAD) {
+		/* you cannot read from these stream types. */
+		return -EPERM;
+	}
+
+	/* Try to claim this stream. */
+	if (cx18_claim_stream(id, s->type))
+		return -EBUSY;
+
+	/* If capture is already in progress, then we also have to
+	   do nothing extra. */
+	if (test_bit(CX18_F_S_STREAMOFF, &s->s_flags) ||
+	    test_and_set_bit(CX18_F_S_STREAMING, &s->s_flags)) {
+		set_bit(CX18_F_S_APPL_IO, &s->s_flags);
+		return 0;
+	}
+
+	/* Start associated VBI or IDX stream capture if required */
+	s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
+	s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+	if (s->type == CX18_ENC_STREAM_TYPE_MPG) {
+		/*
+		 * The VBI and IDX streams should have been claimed
+		 * automatically, if for internal use, when the MPG stream was
+		 * claimed.  We only need to start these streams capturing.
+		 */
+		if (test_bit(CX18_F_S_INTERNAL_USE, &s_idx->s_flags) &&
+		    !test_and_set_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) {
+			if (cx18_start_v4l2_encode_stream(s_idx)) {
+				CX18_DEBUG_WARN("IDX capture start failed\n");
+				clear_bit(CX18_F_S_STREAMING, &s_idx->s_flags);
+				goto start_failed;
+			}
+			CX18_DEBUG_INFO("IDX capture started\n");
+		}
+		if (test_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags) &&
+		    !test_and_set_bit(CX18_F_S_STREAMING, &s_vbi->s_flags)) {
+			if (cx18_start_v4l2_encode_stream(s_vbi)) {
+				CX18_DEBUG_WARN("VBI capture start failed\n");
+				clear_bit(CX18_F_S_STREAMING, &s_vbi->s_flags);
+				goto start_failed;
+			}
+			CX18_DEBUG_INFO("VBI insertion started\n");
+		}
+	}
+
+	/* Tell the card to start capturing */
+	if (!cx18_start_v4l2_encode_stream(s)) {
+		/* We're done */
+		set_bit(CX18_F_S_APPL_IO, &s->s_flags);
+		/* Resume a possibly paused encoder */
+		if (test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags))
+			cx18_vapi(cx, CX18_CPU_CAPTURE_PAUSE, 1, s->handle);
+		return 0;
+	}
+
+start_failed:
+	CX18_DEBUG_WARN("Failed to start capturing for stream %s\n", s->name);
+
+	/*
+	 * The associated VBI and IDX streams for internal use are released
+	 * automatically when the MPG stream is released.  We only need to stop
+	 * the associated stream.
+	 */
+	if (s->type == CX18_ENC_STREAM_TYPE_MPG) {
+		/* Stop the IDX stream which is always for internal use */
+		if (test_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) {
+			cx18_stop_v4l2_encode_stream(s_idx, 0);
+			clear_bit(CX18_F_S_STREAMING, &s_idx->s_flags);
+		}
+		/* Stop the VBI stream, if only running for internal use */
+		if (test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) &&
+		    !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) {
+			cx18_stop_v4l2_encode_stream(s_vbi, 0);
+			clear_bit(CX18_F_S_STREAMING, &s_vbi->s_flags);
+		}
+	}
+	clear_bit(CX18_F_S_STREAMING, &s->s_flags);
+	cx18_release_stream(s); /* Also releases associated streams */
+	return -EIO;
+}
+
+ssize_t cx18_v4l2_read(struct file *filp, char __user *buf, size_t count,
+		loff_t *pos)
+{
+	struct cx18_open_id *id = file2id(filp);
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+	int rc;
+
+	CX18_DEBUG_HI_FILE("read %zd bytes from %s\n", count, s->name);
+
+	mutex_lock(&cx->serialize_lock);
+	rc = cx18_start_capture(id);
+	mutex_unlock(&cx->serialize_lock);
+	if (rc)
+		return rc;
+
+	if ((s->vb_type == V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+		(id->type == CX18_ENC_STREAM_TYPE_YUV)) {
+		return videobuf_read_stream(&s->vbuf_q, buf, count, pos, 0,
+			filp->f_flags & O_NONBLOCK);
+	}
+
+	return cx18_read_pos(s, buf, count, pos, filp->f_flags & O_NONBLOCK);
+}
+
+__poll_t cx18_v4l2_enc_poll(struct file *filp, poll_table *wait)
+{
+	__poll_t req_events = poll_requested_events(wait);
+	struct cx18_open_id *id = file2id(filp);
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+	int eof = test_bit(CX18_F_S_STREAMOFF, &s->s_flags);
+	__poll_t res = 0;
+
+	/* Start a capture if there is none */
+	if (!eof && !test_bit(CX18_F_S_STREAMING, &s->s_flags) &&
+			(req_events & (EPOLLIN | EPOLLRDNORM))) {
+		int rc;
+
+		mutex_lock(&cx->serialize_lock);
+		rc = cx18_start_capture(id);
+		mutex_unlock(&cx->serialize_lock);
+		if (rc) {
+			CX18_DEBUG_INFO("Could not start capture for %s (%d)\n",
+					s->name, rc);
+			return EPOLLERR;
+		}
+		CX18_DEBUG_FILE("Encoder poll started capture\n");
+	}
+
+	if ((s->vb_type == V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+		(id->type == CX18_ENC_STREAM_TYPE_YUV)) {
+		__poll_t videobuf_poll = videobuf_poll_stream(filp, &s->vbuf_q, wait);
+
+		if (v4l2_event_pending(&id->fh))
+			res |= EPOLLPRI;
+		if (eof && videobuf_poll == EPOLLERR)
+			return res | EPOLLHUP;
+		return res | videobuf_poll;
+	}
+
+	/* add stream's waitq to the poll list */
+	CX18_DEBUG_HI_FILE("Encoder poll\n");
+	if (v4l2_event_pending(&id->fh))
+		res |= EPOLLPRI;
+	else
+		poll_wait(filp, &s->waitq, wait);
+
+	if (atomic_read(&s->q_full.depth))
+		return res | EPOLLIN | EPOLLRDNORM;
+	if (eof)
+		return res | EPOLLHUP;
+	return res;
+}
+
+int cx18_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct cx18_open_id *id = file->private_data;
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+	int eof = test_bit(CX18_F_S_STREAMOFF, &s->s_flags);
+
+	if ((s->vb_type == V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+		(id->type == CX18_ENC_STREAM_TYPE_YUV)) {
+
+		/* Start a capture if there is none */
+		if (!eof && !test_bit(CX18_F_S_STREAMING, &s->s_flags)) {
+			int rc;
+
+			mutex_lock(&cx->serialize_lock);
+			rc = cx18_start_capture(id);
+			mutex_unlock(&cx->serialize_lock);
+			if (rc) {
+				CX18_DEBUG_INFO(
+					"Could not start capture for %s (%d)\n",
+					s->name, rc);
+				return -EINVAL;
+			}
+			CX18_DEBUG_FILE("Encoder mmap started capture\n");
+		}
+
+		return videobuf_mmap_mapper(&s->vbuf_q, vma);
+	}
+
+	return -EINVAL;
+}
+
+void cx18_vb_timeout(struct timer_list *t)
+{
+	struct cx18_stream *s = from_timer(s, t, vb_timeout);
+	struct cx18_videobuf_buffer *buf;
+	unsigned long flags;
+
+	/* Return all of the buffers in error state, so the vbi/vid inode
+	 * can return from blocking.
+	 */
+	spin_lock_irqsave(&s->vb_lock, flags);
+	while (!list_empty(&s->vb_capture)) {
+		buf = list_entry(s->vb_capture.next,
+			struct cx18_videobuf_buffer, vb.queue);
+		list_del(&buf->vb.queue);
+		buf->vb.state = VIDEOBUF_ERROR;
+		wake_up(&buf->vb.done);
+	}
+	spin_unlock_irqrestore(&s->vb_lock, flags);
+}
+
+void cx18_stop_capture(struct cx18_open_id *id, int gop_end)
+{
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+	struct cx18_stream *s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
+	struct cx18_stream *s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+
+	CX18_DEBUG_IOCTL("close() of %s\n", s->name);
+
+	/* 'Unclaim' this stream */
+
+	/* Stop capturing */
+	if (test_bit(CX18_F_S_STREAMING, &s->s_flags)) {
+		CX18_DEBUG_INFO("close stopping capture\n");
+		if (id->type == CX18_ENC_STREAM_TYPE_MPG) {
+			/* Stop internal use associated VBI and IDX streams */
+			if (test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) &&
+			    !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) {
+				CX18_DEBUG_INFO("close stopping embedded VBI capture\n");
+				cx18_stop_v4l2_encode_stream(s_vbi, 0);
+			}
+			if (test_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) {
+				CX18_DEBUG_INFO("close stopping IDX capture\n");
+				cx18_stop_v4l2_encode_stream(s_idx, 0);
+			}
+		}
+		if (id->type == CX18_ENC_STREAM_TYPE_VBI &&
+		    test_bit(CX18_F_S_INTERNAL_USE, &s->s_flags))
+			/* Also used internally, don't stop capturing */
+			s->id = -1;
+		else
+			cx18_stop_v4l2_encode_stream(s, gop_end);
+	}
+	if (!gop_end) {
+		clear_bit(CX18_F_S_APPL_IO, &s->s_flags);
+		clear_bit(CX18_F_S_STREAMOFF, &s->s_flags);
+		cx18_release_stream(s);
+	}
+}
+
+int cx18_v4l2_close(struct file *filp)
+{
+	struct v4l2_fh *fh = filp->private_data;
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+
+	CX18_DEBUG_IOCTL("close() of %s\n", s->name);
+
+	mutex_lock(&cx->serialize_lock);
+	/* Stop radio */
+	if (id->type == CX18_ENC_STREAM_TYPE_RAD &&
+			v4l2_fh_is_singular_file(filp)) {
+		/* Closing radio device, return to TV mode */
+		cx18_mute(cx);
+		/* Mark that the radio is no longer in use */
+		clear_bit(CX18_F_I_RADIO_USER, &cx->i_flags);
+		/* Switch tuner to TV */
+		cx18_call_all(cx, video, s_std, cx->std);
+		/* Select correct audio input (i.e. TV tuner or Line in) */
+		cx18_audio_set_io(cx);
+		if (atomic_read(&cx->ana_capturing) > 0) {
+			/* Undo video mute */
+			cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle,
+			    (v4l2_ctrl_g_ctrl(cx->cxhdl.video_mute) |
+			    (v4l2_ctrl_g_ctrl(cx->cxhdl.video_mute_yuv) << 8)));
+		}
+		/* Done! Unmute and continue. */
+		cx18_unmute(cx);
+	}
+
+	v4l2_fh_del(fh);
+	v4l2_fh_exit(fh);
+
+	/* 'Unclaim' this stream */
+	if (s->id == id->open_id)
+		cx18_stop_capture(id, 0);
+	kfree(id);
+	mutex_unlock(&cx->serialize_lock);
+	return 0;
+}
+
+static int cx18_serialized_open(struct cx18_stream *s, struct file *filp)
+{
+	struct cx18 *cx = s->cx;
+	struct cx18_open_id *item;
+
+	CX18_DEBUG_FILE("open %s\n", s->name);
+
+	/* Allocate memory */
+	item = kzalloc(sizeof(struct cx18_open_id), GFP_KERNEL);
+	if (NULL == item) {
+		CX18_DEBUG_WARN("nomem on v4l2 open\n");
+		return -ENOMEM;
+	}
+	v4l2_fh_init(&item->fh, &s->video_dev);
+
+	item->cx = cx;
+	item->type = s->type;
+
+	item->open_id = cx->open_id++;
+	filp->private_data = &item->fh;
+	v4l2_fh_add(&item->fh);
+
+	if (item->type == CX18_ENC_STREAM_TYPE_RAD &&
+			v4l2_fh_is_singular_file(filp)) {
+		if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) {
+			if (atomic_read(&cx->ana_capturing) > 0) {
+				/* switching to radio while capture is
+				   in progress is not polite */
+				v4l2_fh_del(&item->fh);
+				v4l2_fh_exit(&item->fh);
+				kfree(item);
+				return -EBUSY;
+			}
+		}
+
+		/* Mark that the radio is being used. */
+		set_bit(CX18_F_I_RADIO_USER, &cx->i_flags);
+		/* We have the radio */
+		cx18_mute(cx);
+		/* Switch tuner to radio */
+		cx18_call_all(cx, tuner, s_radio);
+		/* Select the correct audio input (i.e. radio tuner) */
+		cx18_audio_set_io(cx);
+		/* Done! Unmute and continue. */
+		cx18_unmute(cx);
+	}
+	return 0;
+}
+
+int cx18_v4l2_open(struct file *filp)
+{
+	int res;
+	struct video_device *video_dev = video_devdata(filp);
+	struct cx18_stream *s = video_get_drvdata(video_dev);
+	struct cx18 *cx = s->cx;
+
+	mutex_lock(&cx->serialize_lock);
+	if (cx18_init_on_first_open(cx)) {
+		CX18_ERR("Failed to initialize on %s\n",
+			 video_device_node_name(video_dev));
+		mutex_unlock(&cx->serialize_lock);
+		return -ENXIO;
+	}
+	res = cx18_serialized_open(s, filp);
+	mutex_unlock(&cx->serialize_lock);
+	return res;
+}
+
+void cx18_mute(struct cx18 *cx)
+{
+	u32 h;
+	if (atomic_read(&cx->ana_capturing)) {
+		h = cx18_find_handle(cx);
+		if (h != CX18_INVALID_TASK_HANDLE)
+			cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, h, 1);
+		else
+			CX18_ERR("Can't find valid task handle for mute\n");
+	}
+	CX18_DEBUG_INFO("Mute\n");
+}
+
+void cx18_unmute(struct cx18 *cx)
+{
+	u32 h;
+	if (atomic_read(&cx->ana_capturing)) {
+		h = cx18_find_handle(cx);
+		if (h != CX18_INVALID_TASK_HANDLE) {
+			cx18_msleep_timeout(100, 0);
+			cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, h, 12);
+			cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, h, 0);
+		} else
+			CX18_ERR("Can't find valid task handle for unmute\n");
+	}
+	CX18_DEBUG_INFO("Unmute\n");
+}
diff --git a/drivers/media/pci/cx18/cx18-fileops.h b/drivers/media/pci/cx18/cx18-fileops.h
new file mode 100644
index 000000000..5b44d30ef
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-fileops.h
@@ -0,0 +1,36 @@
+/*
+ *  cx18 file operation functions
+ *
+ *  Derived from ivtv-fileops.h
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+/* Testing/Debugging */
+int cx18_v4l2_open(struct file *filp);
+ssize_t cx18_v4l2_read(struct file *filp, char __user *buf, size_t count,
+		      loff_t *pos);
+ssize_t cx18_v4l2_write(struct file *filp, const char __user *buf, size_t count,
+		       loff_t *pos);
+int cx18_v4l2_close(struct file *filp);
+__poll_t cx18_v4l2_enc_poll(struct file *filp, poll_table *wait);
+int cx18_start_capture(struct cx18_open_id *id);
+void cx18_stop_capture(struct cx18_open_id *id, int gop_end);
+void cx18_mute(struct cx18 *cx);
+void cx18_unmute(struct cx18 *cx);
+int cx18_v4l2_mmap(struct file *file, struct vm_area_struct *vma);
+void cx18_vb_timeout(struct timer_list *t);
+
+/* Shared with cx18-alsa module */
+int cx18_claim_stream(struct cx18_open_id *id, int type);
+void cx18_release_stream(struct cx18_stream *s);
diff --git a/drivers/media/pci/cx18/cx18-firmware.c b/drivers/media/pci/cx18/cx18-firmware.c
new file mode 100644
index 000000000..498a1854b
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-firmware.c
@@ -0,0 +1,454 @@
+/*
+ *  cx18 firmware functions
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-scb.h"
+#include "cx18-irq.h"
+#include "cx18-firmware.h"
+#include "cx18-cards.h"
+#include <linux/firmware.h>
+
+#define CX18_PROC_SOFT_RESET		0xc70010
+#define CX18_DDR_SOFT_RESET		0xc70014
+#define CX18_CLOCK_SELECT1		0xc71000
+#define CX18_CLOCK_SELECT2		0xc71004
+#define CX18_HALF_CLOCK_SELECT1		0xc71008
+#define CX18_HALF_CLOCK_SELECT2		0xc7100C
+#define CX18_CLOCK_POLARITY1		0xc71010
+#define CX18_CLOCK_POLARITY2		0xc71014
+#define CX18_ADD_DELAY_ENABLE1		0xc71018
+#define CX18_ADD_DELAY_ENABLE2		0xc7101C
+#define CX18_CLOCK_ENABLE1		0xc71020
+#define CX18_CLOCK_ENABLE2		0xc71024
+
+#define CX18_REG_BUS_TIMEOUT_EN		0xc72024
+
+#define CX18_FAST_CLOCK_PLL_INT		0xc78000
+#define CX18_FAST_CLOCK_PLL_FRAC	0xc78004
+#define CX18_FAST_CLOCK_PLL_POST	0xc78008
+#define CX18_FAST_CLOCK_PLL_PRESCALE	0xc7800C
+#define CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH 0xc78010
+
+#define CX18_SLOW_CLOCK_PLL_INT		0xc78014
+#define CX18_SLOW_CLOCK_PLL_FRAC	0xc78018
+#define CX18_SLOW_CLOCK_PLL_POST	0xc7801C
+#define CX18_MPEG_CLOCK_PLL_INT		0xc78040
+#define CX18_MPEG_CLOCK_PLL_FRAC	0xc78044
+#define CX18_MPEG_CLOCK_PLL_POST	0xc78048
+#define CX18_PLL_POWER_DOWN		0xc78088
+#define CX18_SW1_INT_STATUS             0xc73104
+#define CX18_SW1_INT_ENABLE_PCI         0xc7311C
+#define CX18_SW2_INT_SET                0xc73140
+#define CX18_SW2_INT_STATUS             0xc73144
+#define CX18_ADEC_CONTROL		0xc78120
+
+#define CX18_DDR_REQUEST_ENABLE		0xc80000
+#define CX18_DDR_CHIP_CONFIG		0xc80004
+#define CX18_DDR_REFRESH		0xc80008
+#define CX18_DDR_TIMING1		0xc8000C
+#define CX18_DDR_TIMING2		0xc80010
+#define CX18_DDR_POWER_REG		0xc8001C
+
+#define CX18_DDR_TUNE_LANE		0xc80048
+#define CX18_DDR_INITIAL_EMRS		0xc80054
+#define CX18_DDR_MB_PER_ROW_7		0xc8009C
+#define CX18_DDR_BASE_63_ADDR		0xc804FC
+
+#define CX18_WMB_CLIENT02		0xc90108
+#define CX18_WMB_CLIENT05		0xc90114
+#define CX18_WMB_CLIENT06		0xc90118
+#define CX18_WMB_CLIENT07		0xc9011C
+#define CX18_WMB_CLIENT08		0xc90120
+#define CX18_WMB_CLIENT09		0xc90124
+#define CX18_WMB_CLIENT10		0xc90128
+#define CX18_WMB_CLIENT11		0xc9012C
+#define CX18_WMB_CLIENT12		0xc90130
+#define CX18_WMB_CLIENT13		0xc90134
+#define CX18_WMB_CLIENT14		0xc90138
+
+#define CX18_DSP0_INTERRUPT_MASK	0xd0004C
+
+#define APU_ROM_SYNC1 0x6D676553 /* "mgeS" */
+#define APU_ROM_SYNC2 0x72646548 /* "rdeH" */
+
+struct cx18_apu_rom_seghdr {
+	u32 sync1;
+	u32 sync2;
+	u32 addr;
+	u32 size;
+};
+
+static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx)
+{
+	const struct firmware *fw = NULL;
+	int i, j;
+	unsigned size;
+	u32 __iomem *dst = (u32 __iomem *)mem;
+	const u32 *src;
+
+	if (request_firmware(&fw, fn, &cx->pci_dev->dev)) {
+		CX18_ERR("Unable to open firmware %s\n", fn);
+		CX18_ERR("Did you put the firmware in the hotplug firmware directory?\n");
+		return -ENOMEM;
+	}
+
+	src = (const u32 *)fw->data;
+
+	for (i = 0; i < fw->size; i += 4096) {
+		cx18_setup_page(cx, i);
+		for (j = i; j < fw->size && j < i + 4096; j += 4) {
+			/* no need for endianness conversion on the ppc */
+			cx18_raw_writel(cx, *src, dst);
+			if (cx18_raw_readl(cx, dst) != *src) {
+				CX18_ERR("Mismatch at offset %x\n", i);
+				release_firmware(fw);
+				cx18_setup_page(cx, 0);
+				return -EIO;
+			}
+			dst++;
+			src++;
+		}
+	}
+	if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
+		CX18_INFO("loaded %s firmware (%zu bytes)\n", fn, fw->size);
+	size = fw->size;
+	release_firmware(fw);
+	cx18_setup_page(cx, SCB_OFFSET);
+	return size;
+}
+
+static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx,
+				u32 *entry_addr)
+{
+	const struct firmware *fw = NULL;
+	int i, j;
+	unsigned size;
+	const u32 *src;
+	struct cx18_apu_rom_seghdr seghdr;
+	const u8 *vers;
+	u32 offset = 0;
+	u32 apu_version = 0;
+	int sz;
+
+	if (request_firmware(&fw, fn, &cx->pci_dev->dev)) {
+		CX18_ERR("unable to open firmware %s\n", fn);
+		CX18_ERR("did you put the firmware in the hotplug firmware directory?\n");
+		cx18_setup_page(cx, 0);
+		return -ENOMEM;
+	}
+
+	*entry_addr = 0;
+	src = (const u32 *)fw->data;
+	vers = fw->data + sizeof(seghdr);
+	sz = fw->size;
+
+	apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32];
+	while (offset + sizeof(seghdr) < fw->size) {
+		const __le32 *shptr = (__force __le32 *)src + offset / 4;
+
+		seghdr.sync1 = le32_to_cpu(shptr[0]);
+		seghdr.sync2 = le32_to_cpu(shptr[1]);
+		seghdr.addr = le32_to_cpu(shptr[2]);
+		seghdr.size = le32_to_cpu(shptr[3]);
+
+		offset += sizeof(seghdr);
+		if (seghdr.sync1 != APU_ROM_SYNC1 ||
+		    seghdr.sync2 != APU_ROM_SYNC2) {
+			offset += seghdr.size;
+			continue;
+		}
+		CX18_DEBUG_INFO("load segment %x-%x\n", seghdr.addr,
+				seghdr.addr + seghdr.size - 1);
+		if (*entry_addr == 0)
+			*entry_addr = seghdr.addr;
+		if (offset + seghdr.size > sz)
+			break;
+		for (i = 0; i < seghdr.size; i += 4096) {
+			cx18_setup_page(cx, seghdr.addr + i);
+			for (j = i; j < seghdr.size && j < i + 4096; j += 4) {
+				/* no need for endianness conversion on the ppc */
+				cx18_raw_writel(cx, src[(offset + j) / 4],
+						dst + seghdr.addr + j);
+				if (cx18_raw_readl(cx, dst + seghdr.addr + j)
+				    != src[(offset + j) / 4]) {
+					CX18_ERR("Mismatch at offset %x\n",
+						 offset + j);
+					release_firmware(fw);
+					cx18_setup_page(cx, 0);
+					return -EIO;
+				}
+			}
+		}
+		offset += seghdr.size;
+	}
+	if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
+		CX18_INFO("loaded %s firmware V%08x (%zu bytes)\n",
+				fn, apu_version, fw->size);
+	size = fw->size;
+	release_firmware(fw);
+	cx18_setup_page(cx, 0);
+	return size;
+}
+
+void cx18_halt_firmware(struct cx18 *cx)
+{
+	CX18_DEBUG_INFO("Preparing for firmware halt.\n");
+	cx18_write_reg_expect(cx, 0x000F000F, CX18_PROC_SOFT_RESET,
+				  0x0000000F, 0x000F000F);
+	cx18_write_reg_expect(cx, 0x00020002, CX18_ADEC_CONTROL,
+				  0x00000002, 0x00020002);
+}
+
+void cx18_init_power(struct cx18 *cx, int lowpwr)
+{
+	/* power-down Spare and AOM PLLs */
+	/* power-up fast, slow and mpeg PLLs */
+	cx18_write_reg(cx, 0x00000008, CX18_PLL_POWER_DOWN);
+
+	/* ADEC out of sleep */
+	cx18_write_reg_expect(cx, 0x00020000, CX18_ADEC_CONTROL,
+				  0x00000000, 0x00020002);
+
+	/*
+	 * The PLL parameters are based on the external crystal frequency that
+	 * would ideally be:
+	 *
+	 * NTSC Color subcarrier freq * 8 =
+	 *	4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
+	 *
+	 * The accidents of history and rationale that explain from where this
+	 * combination of magic numbers originate can be found in:
+	 *
+	 * [1] Abrahams, I. C., "Choice of Chrominance Subcarrier Frequency in
+	 * the NTSC Standards", Proceedings of the I-R-E, January 1954, pp 79-80
+	 *
+	 * [2] Abrahams, I. C., "The 'Frequency Interleaving' Principle in the
+	 * NTSC Standards", Proceedings of the I-R-E, January 1954, pp 81-83
+	 *
+	 * As Mike Bradley has rightly pointed out, it's not the exact crystal
+	 * frequency that matters, only that all parts of the driver and
+	 * firmware are using the same value (close to the ideal value).
+	 *
+	 * Since I have a strong suspicion that, if the firmware ever assumes a
+	 * crystal value at all, it will assume 28.636360 MHz, the crystal
+	 * freq used in calculations in this driver will be:
+	 *
+	 *	xtal_freq = 28.636360 MHz
+	 *
+	 * an error of less than 0.13 ppm which is way, way better than any off
+	 * the shelf crystal will have for accuracy anyway.
+	 *
+	 * Below I aim to run the PLLs' VCOs near 400 MHz to minimze errors.
+	 *
+	 * Many thanks to Jeff Campbell and Mike Bradley for their extensive
+	 * investigation, experimentation, testing, and suggested solutions of
+	 * of audio/video sync problems with SVideo and CVBS captures.
+	 */
+
+	/* the fast clock is at 200/245 MHz */
+	/* 1 * xtal_freq * 0x0d.f7df9b8 / 2 = 200 MHz: 400 MHz pre post-divide*/
+	/* 1 * xtal_freq * 0x11.1c71eb8 / 2 = 245 MHz: 490 MHz pre post-divide*/
+	cx18_write_reg(cx, lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT);
+	cx18_write_reg(cx, lowpwr ? 0x1EFBF37 : 0x038E3D7,
+						CX18_FAST_CLOCK_PLL_FRAC);
+
+	cx18_write_reg(cx, 2, CX18_FAST_CLOCK_PLL_POST);
+	cx18_write_reg(cx, 1, CX18_FAST_CLOCK_PLL_PRESCALE);
+	cx18_write_reg(cx, 4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH);
+
+	/* set slow clock to 125/120 MHz */
+	/* xtal_freq * 0x0d.1861a20 / 3 = 125 MHz: 375 MHz before post-divide */
+	/* xtal_freq * 0x0c.92493f8 / 3 = 120 MHz: 360 MHz before post-divide */
+	cx18_write_reg(cx, lowpwr ? 0xD : 0xC, CX18_SLOW_CLOCK_PLL_INT);
+	cx18_write_reg(cx, lowpwr ? 0x30C344 : 0x124927F,
+						CX18_SLOW_CLOCK_PLL_FRAC);
+	cx18_write_reg(cx, 3, CX18_SLOW_CLOCK_PLL_POST);
+
+	/* mpeg clock pll 54MHz */
+	/* xtal_freq * 0xf.15f17f0 / 8 = 54 MHz: 432 MHz before post-divide */
+	cx18_write_reg(cx, 0xF, CX18_MPEG_CLOCK_PLL_INT);
+	cx18_write_reg(cx, 0x2BE2FE, CX18_MPEG_CLOCK_PLL_FRAC);
+	cx18_write_reg(cx, 8, CX18_MPEG_CLOCK_PLL_POST);
+
+	/* Defaults */
+	/* APU = SC or SC/2 = 125/62.5 */
+	/* EPU = SC = 125 */
+	/* DDR = FC = 180 */
+	/* ENC = SC = 125 */
+	/* AI1 = SC = 125 */
+	/* VIM2 = disabled */
+	/* PCI = FC/2 = 90 */
+	/* AI2 = disabled */
+	/* DEMUX = disabled */
+	/* AO = SC/2 = 62.5 */
+	/* SER = 54MHz */
+	/* VFC = disabled */
+	/* USB = disabled */
+
+	if (lowpwr) {
+		cx18_write_reg_expect(cx, 0xFFFF0020, CX18_CLOCK_SELECT1,
+					  0x00000020, 0xFFFFFFFF);
+		cx18_write_reg_expect(cx, 0xFFFF0004, CX18_CLOCK_SELECT2,
+					  0x00000004, 0xFFFFFFFF);
+	} else {
+		/* This doesn't explicitly set every clock select */
+		cx18_write_reg_expect(cx, 0x00060004, CX18_CLOCK_SELECT1,
+					  0x00000004, 0x00060006);
+		cx18_write_reg_expect(cx, 0x00060006, CX18_CLOCK_SELECT2,
+					  0x00000006, 0x00060006);
+	}
+
+	cx18_write_reg_expect(cx, 0xFFFF0002, CX18_HALF_CLOCK_SELECT1,
+				  0x00000002, 0xFFFFFFFF);
+	cx18_write_reg_expect(cx, 0xFFFF0104, CX18_HALF_CLOCK_SELECT2,
+				  0x00000104, 0xFFFFFFFF);
+	cx18_write_reg_expect(cx, 0xFFFF9026, CX18_CLOCK_ENABLE1,
+				  0x00009026, 0xFFFFFFFF);
+	cx18_write_reg_expect(cx, 0xFFFF3105, CX18_CLOCK_ENABLE2,
+				  0x00003105, 0xFFFFFFFF);
+}
+
+void cx18_init_memory(struct cx18 *cx)
+{
+	cx18_msleep_timeout(10, 0);
+	cx18_write_reg_expect(cx, 0x00010000, CX18_DDR_SOFT_RESET,
+				  0x00000000, 0x00010001);
+	cx18_msleep_timeout(10, 0);
+
+	cx18_write_reg(cx, cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG);
+
+	cx18_msleep_timeout(10, 0);
+
+	cx18_write_reg(cx, cx->card->ddr.refresh, CX18_DDR_REFRESH);
+	cx18_write_reg(cx, cx->card->ddr.timing1, CX18_DDR_TIMING1);
+	cx18_write_reg(cx, cx->card->ddr.timing2, CX18_DDR_TIMING2);
+
+	cx18_msleep_timeout(10, 0);
+
+	/* Initialize DQS pad time */
+	cx18_write_reg(cx, cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE);
+	cx18_write_reg(cx, cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS);
+
+	cx18_msleep_timeout(10, 0);
+
+	cx18_write_reg_expect(cx, 0x00020000, CX18_DDR_SOFT_RESET,
+				  0x00000000, 0x00020002);
+	cx18_msleep_timeout(10, 0);
+
+	/* use power-down mode when idle */
+	cx18_write_reg(cx, 0x00000010, CX18_DDR_POWER_REG);
+
+	cx18_write_reg_expect(cx, 0x00010001, CX18_REG_BUS_TIMEOUT_EN,
+				  0x00000001, 0x00010001);
+
+	cx18_write_reg(cx, 0x48, CX18_DDR_MB_PER_ROW_7);
+	cx18_write_reg(cx, 0xE0000, CX18_DDR_BASE_63_ADDR);
+
+	cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT02);  /* AO */
+	cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT09);  /* AI2 */
+	cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT05);  /* VIM1 */
+	cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT06);  /* AI1 */
+	cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT07);  /* 3D comb */
+	cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT10);  /* ME */
+	cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT12);  /* ENC */
+	cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT13);  /* PK */
+	cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT11);  /* RC */
+	cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT14);  /* AVO */
+}
+
+#define CX18_CPU_FIRMWARE "v4l-cx23418-cpu.fw"
+#define CX18_APU_FIRMWARE "v4l-cx23418-apu.fw"
+
+int cx18_firmware_init(struct cx18 *cx)
+{
+	u32 fw_entry_addr;
+	int sz, retries;
+	u32 api_args[MAX_MB_ARGUMENTS];
+
+	/* Allow chip to control CLKRUN */
+	cx18_write_reg(cx, 0x5, CX18_DSP0_INTERRUPT_MASK);
+
+	/* Stop the firmware */
+	cx18_write_reg_expect(cx, 0x000F000F, CX18_PROC_SOFT_RESET,
+				  0x0000000F, 0x000F000F);
+
+	cx18_msleep_timeout(1, 0);
+
+	/* If the CPU is still running */
+	if ((cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 8) == 0) {
+		CX18_ERR("%s: couldn't stop CPU to load firmware\n", __func__);
+		return -EIO;
+	}
+
+	cx18_sw1_irq_enable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
+	cx18_sw2_irq_enable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
+
+	sz = load_cpu_fw_direct(CX18_CPU_FIRMWARE, cx->enc_mem, cx);
+	if (sz <= 0)
+		return sz;
+
+	/* The SCB & IPC area *must* be correct before starting the firmwares */
+	cx18_init_scb(cx);
+
+	fw_entry_addr = 0;
+	sz = load_apu_fw_direct(CX18_APU_FIRMWARE, cx->enc_mem, cx,
+				&fw_entry_addr);
+	if (sz <= 0)
+		return sz;
+
+	/* Start the CPU. The CPU will take care of the APU for us. */
+	cx18_write_reg_expect(cx, 0x00080000, CX18_PROC_SOFT_RESET,
+				  0x00000000, 0x00080008);
+
+	/* Wait up to 500 ms for the APU to come out of reset */
+	for (retries = 0;
+	     retries < 50 && (cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 1) == 1;
+	     retries++)
+		cx18_msleep_timeout(10, 0);
+
+	cx18_msleep_timeout(200, 0);
+
+	if (retries == 50 &&
+	    (cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 1) == 1) {
+		CX18_ERR("Could not start the CPU\n");
+		return -EIO;
+	}
+
+	/*
+	 * The CPU had once before set up to receive an interrupt for it's
+	 * outgoing IRQ_CPU_TO_EPU_ACK to us.  If it ever does this, we get an
+	 * interrupt when it sends us an ack, but by the time we process it,
+	 * that flag in the SW2 status register has been cleared by the CPU
+	 * firmware.  We'll prevent that not so useful condition from happening
+	 * by clearing the CPU's interrupt enables for Ack IRQ's we want to
+	 * process.
+	 */
+	cx18_sw2_irq_disable_cpu(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
+
+	/* Try a benign command to see if the CPU is alive and well */
+	sz = cx18_vapi_result(cx, api_args, CX18_CPU_DEBUG_PEEK32, 1, 0);
+	if (sz < 0)
+		return sz;
+
+	/* initialize GPIO */
+	cx18_write_reg_expect(cx, 0x14001400, 0xc78110, 0x00001400, 0x14001400);
+	return 0;
+}
+
+MODULE_FIRMWARE(CX18_CPU_FIRMWARE);
+MODULE_FIRMWARE(CX18_APU_FIRMWARE);
diff --git a/drivers/media/pci/cx18/cx18-firmware.h b/drivers/media/pci/cx18/cx18-firmware.h
new file mode 100644
index 000000000..bdc4b11f7
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-firmware.h
@@ -0,0 +1,20 @@
+/*
+ *  cx18 firmware functions
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+int cx18_firmware_init(struct cx18 *cx);
+void cx18_halt_firmware(struct cx18 *cx);
+void cx18_init_memory(struct cx18 *cx);
+void cx18_init_power(struct cx18 *cx, int lowpwr);
diff --git a/drivers/media/pci/cx18/cx18-gpio.c b/drivers/media/pci/cx18/cx18-gpio.c
new file mode 100644
index 000000000..012859e6d
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-gpio.c
@@ -0,0 +1,346 @@
+/*
+ *  cx18 gpio functions
+ *
+ *  Derived from ivtv-gpio.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-cards.h"
+#include "cx18-gpio.h"
+#include "tuner-xc2028.h"
+
+/********************* GPIO stuffs *********************/
+
+/* GPIO registers */
+#define CX18_REG_GPIO_IN     0xc72010
+#define CX18_REG_GPIO_OUT1   0xc78100
+#define CX18_REG_GPIO_DIR1   0xc78108
+#define CX18_REG_GPIO_OUT2   0xc78104
+#define CX18_REG_GPIO_DIR2   0xc7810c
+
+/*
+ * HVR-1600 GPIO pins, courtesy of Hauppauge:
+ *
+ * gpio0: zilog ir process reset pin
+ * gpio1: zilog programming pin (you should never use this)
+ * gpio12: cx24227 reset pin
+ * gpio13: cs5345 reset pin
+*/
+
+/*
+ * File scope utility functions
+ */
+static void gpio_write(struct cx18 *cx)
+{
+	u32 dir_lo = cx->gpio_dir & 0xffff;
+	u32 val_lo = cx->gpio_val & 0xffff;
+	u32 dir_hi = cx->gpio_dir >> 16;
+	u32 val_hi = cx->gpio_val >> 16;
+
+	cx18_write_reg_expect(cx, dir_lo << 16,
+					CX18_REG_GPIO_DIR1, ~dir_lo, dir_lo);
+	cx18_write_reg_expect(cx, (dir_lo << 16) | val_lo,
+					CX18_REG_GPIO_OUT1, val_lo, dir_lo);
+	cx18_write_reg_expect(cx, dir_hi << 16,
+					CX18_REG_GPIO_DIR2, ~dir_hi, dir_hi);
+	cx18_write_reg_expect(cx, (dir_hi << 16) | val_hi,
+					CX18_REG_GPIO_OUT2, val_hi, dir_hi);
+}
+
+static void gpio_update(struct cx18 *cx, u32 mask, u32 data)
+{
+	if (mask == 0)
+		return;
+
+	mutex_lock(&cx->gpio_lock);
+	cx->gpio_val = (cx->gpio_val & ~mask) | (data & mask);
+	gpio_write(cx);
+	mutex_unlock(&cx->gpio_lock);
+}
+
+static void gpio_reset_seq(struct cx18 *cx, u32 active_lo, u32 active_hi,
+			   unsigned int assert_msecs,
+			   unsigned int recovery_msecs)
+{
+	u32 mask;
+
+	mask = active_lo | active_hi;
+	if (mask == 0)
+		return;
+
+	/*
+	 * Assuming that active_hi and active_lo are a subsets of the bits in
+	 * gpio_dir.  Also assumes that active_lo and active_hi don't overlap
+	 * in any bit position
+	 */
+
+	/* Assert */
+	gpio_update(cx, mask, ~active_lo);
+	schedule_timeout_uninterruptible(msecs_to_jiffies(assert_msecs));
+
+	/* Deassert */
+	gpio_update(cx, mask, ~active_hi);
+	schedule_timeout_uninterruptible(msecs_to_jiffies(recovery_msecs));
+}
+
+/*
+ * GPIO Multiplexer - logical device
+ */
+static int gpiomux_log_status(struct v4l2_subdev *sd)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	mutex_lock(&cx->gpio_lock);
+	CX18_INFO_DEV(sd, "GPIO:  direction 0x%08x, value 0x%08x\n",
+		      cx->gpio_dir, cx->gpio_val);
+	mutex_unlock(&cx->gpio_lock);
+	return 0;
+}
+
+static int gpiomux_s_radio(struct v4l2_subdev *sd)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	/*
+	 * FIXME - work out the cx->active/audio_input mess - this is
+	 * intended to handle the switch to radio mode and set the
+	 * audio routing, but we need to update the state in cx
+	 */
+	gpio_update(cx, cx->card->gpio_audio_input.mask,
+			cx->card->gpio_audio_input.radio);
+	return 0;
+}
+
+static int gpiomux_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	u32 data;
+
+	switch (cx->card->audio_inputs[cx->audio_input].muxer_input) {
+	case 1:
+		data = cx->card->gpio_audio_input.linein;
+		break;
+	case 0:
+		data = cx->card->gpio_audio_input.tuner;
+		break;
+	default:
+		/*
+		 * FIXME - work out the cx->active/audio_input mess - this is
+		 * intended to handle the switch from radio mode and set the
+		 * audio routing, but we need to update the state in cx
+		 */
+		data = cx->card->gpio_audio_input.tuner;
+		break;
+	}
+	gpio_update(cx, cx->card->gpio_audio_input.mask, data);
+	return 0;
+}
+
+static int gpiomux_s_audio_routing(struct v4l2_subdev *sd,
+				   u32 input, u32 output, u32 config)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	u32 data;
+
+	switch (input) {
+	case 0:
+		data = cx->card->gpio_audio_input.tuner;
+		break;
+	case 1:
+		data = cx->card->gpio_audio_input.linein;
+		break;
+	case 2:
+		data = cx->card->gpio_audio_input.radio;
+		break;
+	default:
+		return -EINVAL;
+	}
+	gpio_update(cx, cx->card->gpio_audio_input.mask, data);
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops gpiomux_core_ops = {
+	.log_status = gpiomux_log_status,
+};
+
+static const struct v4l2_subdev_tuner_ops gpiomux_tuner_ops = {
+	.s_radio = gpiomux_s_radio,
+};
+
+static const struct v4l2_subdev_audio_ops gpiomux_audio_ops = {
+	.s_routing = gpiomux_s_audio_routing,
+};
+
+static const struct v4l2_subdev_video_ops gpiomux_video_ops = {
+	.s_std = gpiomux_s_std,
+};
+
+static const struct v4l2_subdev_ops gpiomux_ops = {
+	.core = &gpiomux_core_ops,
+	.tuner = &gpiomux_tuner_ops,
+	.audio = &gpiomux_audio_ops,
+	.video = &gpiomux_video_ops,
+};
+
+/*
+ * GPIO Reset Controller - logical device
+ */
+static int resetctrl_log_status(struct v4l2_subdev *sd)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	mutex_lock(&cx->gpio_lock);
+	CX18_INFO_DEV(sd, "GPIO:  direction 0x%08x, value 0x%08x\n",
+		      cx->gpio_dir, cx->gpio_val);
+	mutex_unlock(&cx->gpio_lock);
+	return 0;
+}
+
+static int resetctrl_reset(struct v4l2_subdev *sd, u32 val)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	const struct cx18_gpio_i2c_slave_reset *p;
+
+	p = &cx->card->gpio_i2c_slave_reset;
+	switch (val) {
+	case CX18_GPIO_RESET_I2C:
+		gpio_reset_seq(cx, p->active_lo_mask, p->active_hi_mask,
+			       p->msecs_asserted, p->msecs_recovery);
+		break;
+	case CX18_GPIO_RESET_Z8F0811:
+		/*
+		 * Assert timing for the Z8F0811 on HVR-1600 boards:
+		 * 1. Assert RESET for min of 4 clock cycles at 18.432 MHz to
+		 *    initiate
+		 * 2. Reset then takes 66 WDT cycles at 10 kHz + 16 xtal clock
+		 *    cycles (6,601,085 nanoseconds ~= 7 milliseconds)
+		 * 3. DBG pin must be high before chip exits reset for normal
+		 *    operation.  DBG is open drain and hopefully pulled high
+		 *    since we don't normally drive it (GPIO 1?) for the
+		 *    HVR-1600
+		 * 4. Z8F0811 won't exit reset until RESET is deasserted
+		 * 5. Zilog comes out of reset, loads reset vector address and
+		 *    executes from there. Required recovery delay unknown.
+		 */
+		gpio_reset_seq(cx, p->ir_reset_mask, 0,
+			       p->msecs_asserted, p->msecs_recovery);
+		break;
+	case CX18_GPIO_RESET_XC2028:
+		if (cx->card->tuners[0].tuner == TUNER_XC2028)
+			gpio_reset_seq(cx, (1 << cx->card->xceive_pin), 0,
+				       1, 1);
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops resetctrl_core_ops = {
+	.log_status = resetctrl_log_status,
+	.reset = resetctrl_reset,
+};
+
+static const struct v4l2_subdev_ops resetctrl_ops = {
+	.core = &resetctrl_core_ops,
+};
+
+/*
+ * External entry points
+ */
+void cx18_gpio_init(struct cx18 *cx)
+{
+	mutex_lock(&cx->gpio_lock);
+	cx->gpio_dir = cx->card->gpio_init.direction;
+	cx->gpio_val = cx->card->gpio_init.initial_value;
+
+	if (cx->card->tuners[0].tuner == TUNER_XC2028) {
+		cx->gpio_dir |= 1 << cx->card->xceive_pin;
+		cx->gpio_val |= 1 << cx->card->xceive_pin;
+	}
+
+	if (cx->gpio_dir == 0) {
+		mutex_unlock(&cx->gpio_lock);
+		return;
+	}
+
+	CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n",
+			cx18_read_reg(cx, CX18_REG_GPIO_DIR1),
+			cx18_read_reg(cx, CX18_REG_GPIO_DIR2),
+			cx18_read_reg(cx, CX18_REG_GPIO_OUT1),
+			cx18_read_reg(cx, CX18_REG_GPIO_OUT2));
+
+	gpio_write(cx);
+	mutex_unlock(&cx->gpio_lock);
+}
+
+int cx18_gpio_register(struct cx18 *cx, u32 hw)
+{
+	struct v4l2_subdev *sd;
+	const struct v4l2_subdev_ops *ops;
+	char *str;
+
+	switch (hw) {
+	case CX18_HW_GPIO_MUX:
+		sd = &cx->sd_gpiomux;
+		ops = &gpiomux_ops;
+		str = "gpio-mux";
+		break;
+	case CX18_HW_GPIO_RESET_CTRL:
+		sd = &cx->sd_resetctrl;
+		ops = &resetctrl_ops;
+		str = "gpio-reset-ctrl";
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	v4l2_subdev_init(sd, ops);
+	v4l2_set_subdevdata(sd, cx);
+	snprintf(sd->name, sizeof(sd->name), "%s %s", cx->v4l2_dev.name, str);
+	sd->grp_id = hw;
+	return v4l2_device_register_subdev(&cx->v4l2_dev, sd);
+}
+
+void cx18_reset_ir_gpio(void *data)
+{
+	struct cx18 *cx = to_cx18((struct v4l2_device *)data);
+
+	if (cx->card->gpio_i2c_slave_reset.ir_reset_mask == 0)
+		return;
+
+	CX18_DEBUG_INFO("Resetting IR microcontroller\n");
+
+	v4l2_subdev_call(&cx->sd_resetctrl,
+			 core, reset, CX18_GPIO_RESET_Z8F0811);
+}
+EXPORT_SYMBOL(cx18_reset_ir_gpio);
+/* This symbol is exported for use by lirc_pvr150 for the IR-blaster */
+
+/* Xceive tuner reset function */
+int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int value)
+{
+	struct i2c_algo_bit_data *algo = dev;
+	struct cx18_i2c_algo_callback_data *cb_data = algo->data;
+	struct cx18 *cx = cb_data->cx;
+
+	if (cmd != XC2028_TUNER_RESET ||
+	    cx->card->tuners[0].tuner != TUNER_XC2028)
+		return 0;
+
+	CX18_DEBUG_INFO("Resetting XCeive tuner\n");
+	return v4l2_subdev_call(&cx->sd_resetctrl,
+				core, reset, CX18_GPIO_RESET_XC2028);
+}
diff --git a/drivers/media/pci/cx18/cx18-gpio.h b/drivers/media/pci/cx18/cx18-gpio.h
new file mode 100644
index 000000000..0274a17a8
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-gpio.h
@@ -0,0 +1,30 @@
+/*
+ *  cx18 gpio functions
+ *
+ *  Derived from ivtv-gpio.h
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+void cx18_gpio_init(struct cx18 *cx);
+int cx18_gpio_register(struct cx18 *cx, u32 hw);
+
+enum cx18_gpio_reset_type {
+	CX18_GPIO_RESET_I2C     = 0,
+	CX18_GPIO_RESET_Z8F0811 = 1,
+	CX18_GPIO_RESET_XC2028  = 2,
+};
+
+void cx18_reset_ir_gpio(void *data);
+int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int value);
diff --git a/drivers/media/pci/cx18/cx18-i2c.c b/drivers/media/pci/cx18/cx18-i2c.c
new file mode 100644
index 000000000..f0eb181f2
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-i2c.c
@@ -0,0 +1,318 @@
+/*
+ *  cx18 I2C functions
+ *
+ *  Derived from ivtv-i2c.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-cards.h"
+#include "cx18-gpio.h"
+#include "cx18-i2c.h"
+#include "cx18-irq.h"
+
+#define CX18_REG_I2C_1_WR   0xf15000
+#define CX18_REG_I2C_1_RD   0xf15008
+#define CX18_REG_I2C_2_WR   0xf25100
+#define CX18_REG_I2C_2_RD   0xf25108
+
+#define SETSCL_BIT      0x0001
+#define SETSDL_BIT      0x0002
+#define GETSCL_BIT      0x0004
+#define GETSDL_BIT      0x0008
+
+#define CX18_CS5345_I2C_ADDR		0x4c
+#define CX18_Z8F0811_IR_TX_I2C_ADDR	0x70
+#define CX18_Z8F0811_IR_RX_I2C_ADDR	0x71
+
+/* This array should match the CX18_HW_ defines */
+static const u8 hw_addrs[] = {
+	0,				/* CX18_HW_TUNER */
+	0,				/* CX18_HW_TVEEPROM */
+	CX18_CS5345_I2C_ADDR,		/* CX18_HW_CS5345 */
+	0,				/* CX18_HW_DVB */
+	0,				/* CX18_HW_418_AV */
+	0,				/* CX18_HW_GPIO_MUX */
+	0,				/* CX18_HW_GPIO_RESET_CTRL */
+	CX18_Z8F0811_IR_RX_I2C_ADDR,	/* CX18_HW_Z8F0811_IR_HAUP */
+};
+
+/* This array should match the CX18_HW_ defines */
+/* This might well become a card-specific array */
+static const u8 hw_bus[] = {
+	1,	/* CX18_HW_TUNER */
+	0,	/* CX18_HW_TVEEPROM */
+	0,	/* CX18_HW_CS5345 */
+	0,	/* CX18_HW_DVB */
+	0,	/* CX18_HW_418_AV */
+	0,	/* CX18_HW_GPIO_MUX */
+	0,	/* CX18_HW_GPIO_RESET_CTRL */
+	0,	/* CX18_HW_Z8F0811_IR_HAUP */
+};
+
+/* This array should match the CX18_HW_ defines */
+static const char * const hw_devicenames[] = {
+	"tuner",
+	"tveeprom",
+	"cs5345",
+	"cx23418_DTV",
+	"cx23418_AV",
+	"gpio_mux",
+	"gpio_reset_ctrl",
+	"ir_z8f0811_haup",
+};
+
+static int cx18_i2c_new_ir(struct cx18 *cx, struct i2c_adapter *adap, u32 hw,
+			   const char *type, u8 addr)
+{
+	struct i2c_board_info info;
+	struct IR_i2c_init_data *init_data = &cx->ir_i2c_init_data;
+	unsigned short addr_list[2] = { addr, I2C_CLIENT_END };
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, type, I2C_NAME_SIZE);
+
+	/* Our default information for ir-kbd-i2c.c to use */
+	switch (hw) {
+	case CX18_HW_Z8F0811_IR_HAUP:
+		init_data->ir_codes = RC_MAP_HAUPPAUGE;
+		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
+		init_data->type = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE |
+							RC_PROTO_BIT_RC6_6A_32;
+		init_data->name = cx->card_name;
+		info.platform_data = init_data;
+		break;
+	}
+
+	return i2c_new_probed_device(adap, &info, addr_list, NULL) == NULL ?
+	       -1 : 0;
+}
+
+int cx18_i2c_register(struct cx18 *cx, unsigned idx)
+{
+	struct v4l2_subdev *sd;
+	int bus = hw_bus[idx];
+	struct i2c_adapter *adap = &cx->i2c_adap[bus];
+	const char *type = hw_devicenames[idx];
+	u32 hw = 1 << idx;
+
+	if (hw == CX18_HW_TUNER) {
+		/* special tuner group handling */
+		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+				adap, type, 0, cx->card_i2c->radio);
+		if (sd != NULL)
+			sd->grp_id = hw;
+		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+				adap, type, 0, cx->card_i2c->demod);
+		if (sd != NULL)
+			sd->grp_id = hw;
+		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+				adap, type, 0, cx->card_i2c->tv);
+		if (sd != NULL)
+			sd->grp_id = hw;
+		return sd != NULL ? 0 : -1;
+	}
+
+	if (hw == CX18_HW_Z8F0811_IR_HAUP)
+		return cx18_i2c_new_ir(cx, adap, hw, type, hw_addrs[idx]);
+
+	/* Is it not an I2C device or one we do not wish to register? */
+	if (!hw_addrs[idx])
+		return -1;
+
+	/* It's an I2C device other than an analog tuner or IR chip */
+	sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, type, hw_addrs[idx],
+				 NULL);
+	if (sd != NULL)
+		sd->grp_id = hw;
+	return sd != NULL ? 0 : -1;
+}
+
+/* Find the first member of the subdev group id in hw */
+struct v4l2_subdev *cx18_find_hw(struct cx18 *cx, u32 hw)
+{
+	struct v4l2_subdev *result = NULL;
+	struct v4l2_subdev *sd;
+
+	spin_lock(&cx->v4l2_dev.lock);
+	v4l2_device_for_each_subdev(sd, &cx->v4l2_dev) {
+		if (sd->grp_id == hw) {
+			result = sd;
+			break;
+		}
+	}
+	spin_unlock(&cx->v4l2_dev.lock);
+	return result;
+}
+
+static void cx18_setscl(void *data, int state)
+{
+	struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx;
+	int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index;
+	u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR;
+	u32 r = cx18_read_reg(cx, addr);
+
+	if (state)
+		cx18_write_reg(cx, r | SETSCL_BIT, addr);
+	else
+		cx18_write_reg(cx, r & ~SETSCL_BIT, addr);
+}
+
+static void cx18_setsda(void *data, int state)
+{
+	struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx;
+	int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index;
+	u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR;
+	u32 r = cx18_read_reg(cx, addr);
+
+	if (state)
+		cx18_write_reg(cx, r | SETSDL_BIT, addr);
+	else
+		cx18_write_reg(cx, r & ~SETSDL_BIT, addr);
+}
+
+static int cx18_getscl(void *data)
+{
+	struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx;
+	int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index;
+	u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD;
+
+	return cx18_read_reg(cx, addr) & GETSCL_BIT;
+}
+
+static int cx18_getsda(void *data)
+{
+	struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx;
+	int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index;
+	u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD;
+
+	return cx18_read_reg(cx, addr) & GETSDL_BIT;
+}
+
+/* template for i2c-bit-algo */
+static const struct i2c_adapter cx18_i2c_adap_template = {
+	.name = "cx18 i2c driver",
+	.algo = NULL,                   /* set by i2c-algo-bit */
+	.algo_data = NULL,              /* filled from template */
+	.owner = THIS_MODULE,
+};
+
+#define CX18_SCL_PERIOD (10) /* usecs. 10 usec is period for a 100 KHz clock */
+#define CX18_ALGO_BIT_TIMEOUT (2) /* seconds */
+
+static const struct i2c_algo_bit_data cx18_i2c_algo_template = {
+	.setsda		= cx18_setsda,
+	.setscl		= cx18_setscl,
+	.getsda		= cx18_getsda,
+	.getscl		= cx18_getscl,
+	.udelay		= CX18_SCL_PERIOD/2,       /* 1/2 clock period in usec*/
+	.timeout	= CX18_ALGO_BIT_TIMEOUT*HZ /* jiffies */
+};
+
+/* init + register i2c adapter */
+int init_cx18_i2c(struct cx18 *cx)
+{
+	int i, err;
+	CX18_DEBUG_I2C("i2c init\n");
+
+	for (i = 0; i < 2; i++) {
+		/* Setup algorithm for adapter */
+		cx->i2c_algo[i] = cx18_i2c_algo_template;
+		cx->i2c_algo_cb_data[i].cx = cx;
+		cx->i2c_algo_cb_data[i].bus_index = i;
+		cx->i2c_algo[i].data = &cx->i2c_algo_cb_data[i];
+
+		/* Setup adapter */
+		cx->i2c_adap[i] = cx18_i2c_adap_template;
+		cx->i2c_adap[i].algo_data = &cx->i2c_algo[i];
+		sprintf(cx->i2c_adap[i].name + strlen(cx->i2c_adap[i].name),
+				" #%d-%d", cx->instance, i);
+		i2c_set_adapdata(&cx->i2c_adap[i], &cx->v4l2_dev);
+		cx->i2c_adap[i].dev.parent = &cx->pci_dev->dev;
+	}
+
+	if (cx18_read_reg(cx, CX18_REG_I2C_2_WR) != 0x0003c02f) {
+		/* Reset/Unreset I2C hardware block */
+		/* Clock select 220MHz */
+		cx18_write_reg_expect(cx, 0x10000000, 0xc71004,
+					  0x00000000, 0x10001000);
+		/* Clock Enable */
+		cx18_write_reg_expect(cx, 0x10001000, 0xc71024,
+					  0x00001000, 0x10001000);
+	}
+	/* courtesy of Steven Toth <stoth@hauppauge.com> */
+	cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0);
+	mdelay(10);
+	cx18_write_reg_expect(cx, 0x00c000c0, 0xc7001c, 0x000000c0, 0x00c000c0);
+	mdelay(10);
+	cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0);
+	mdelay(10);
+
+	/* Set to edge-triggered intrs. */
+	cx18_write_reg(cx, 0x00c00000, 0xc730c8);
+	/* Clear any stale intrs */
+	cx18_write_reg_expect(cx, HW2_I2C1_INT|HW2_I2C2_INT, HW2_INT_CLR_STATUS,
+		       ~(HW2_I2C1_INT|HW2_I2C2_INT), HW2_I2C1_INT|HW2_I2C2_INT);
+
+	/* Hw I2C1 Clock Freq ~100kHz */
+	cx18_write_reg(cx, 0x00021c0f & ~4, CX18_REG_I2C_1_WR);
+	cx18_setscl(&cx->i2c_algo_cb_data[0], 1);
+	cx18_setsda(&cx->i2c_algo_cb_data[0], 1);
+
+	/* Hw I2C2 Clock Freq ~100kHz */
+	cx18_write_reg(cx, 0x00021c0f & ~4, CX18_REG_I2C_2_WR);
+	cx18_setscl(&cx->i2c_algo_cb_data[1], 1);
+	cx18_setsda(&cx->i2c_algo_cb_data[1], 1);
+
+	cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
+		     core, reset, (u32) CX18_GPIO_RESET_I2C);
+
+	err = i2c_bit_add_bus(&cx->i2c_adap[0]);
+	if (err)
+		goto err;
+	err = i2c_bit_add_bus(&cx->i2c_adap[1]);
+	if (err)
+		goto err_del_bus_0;
+	return 0;
+
+ err_del_bus_0:
+	i2c_del_adapter(&cx->i2c_adap[0]);
+ err:
+	return err;
+}
+
+void exit_cx18_i2c(struct cx18 *cx)
+{
+	int i;
+	CX18_DEBUG_I2C("i2c exit\n");
+	cx18_write_reg(cx, cx18_read_reg(cx, CX18_REG_I2C_1_WR) | 4,
+							CX18_REG_I2C_1_WR);
+	cx18_write_reg(cx, cx18_read_reg(cx, CX18_REG_I2C_2_WR) | 4,
+							CX18_REG_I2C_2_WR);
+
+	for (i = 0; i < 2; i++) {
+		i2c_del_adapter(&cx->i2c_adap[i]);
+	}
+}
+
+/*
+   Hauppauge HVR1600 should have:
+   32 cx24227
+   98 unknown
+   a0 eeprom
+   c2 tuner
+   e? zilog ir
+   */
diff --git a/drivers/media/pci/cx18/cx18-i2c.h b/drivers/media/pci/cx18/cx18-i2c.h
new file mode 100644
index 000000000..bf315ecbe
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-i2c.h
@@ -0,0 +1,24 @@
+/*
+ *  cx18 I2C functions
+ *
+ *  Derived from ivtv-i2c.h
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+int cx18_i2c_register(struct cx18 *cx, unsigned idx);
+struct v4l2_subdev *cx18_find_hw(struct cx18 *cx, u32 hw);
+
+/* init + register i2c adapter */
+int init_cx18_i2c(struct cx18 *cx);
+void exit_cx18_i2c(struct cx18 *cx);
diff --git a/drivers/media/pci/cx18/cx18-io.c b/drivers/media/pci/cx18/cx18-io.c
new file mode 100644
index 000000000..7090fdbce
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-io.c
@@ -0,0 +1,92 @@
+/*
+ *  cx18 driver PCI memory mapped IO access routines
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-irq.h"
+
+void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count)
+{
+	u8 __iomem *dst = addr;
+	u16 val2 = val | (val << 8);
+	u32 val4 = val2 | (val2 << 16);
+
+	/* Align writes on the CX23418's addresses */
+	if ((count > 0) && ((unsigned long)dst & 1)) {
+		cx18_writeb(cx, (u8) val, dst);
+		count--;
+		dst++;
+	}
+	if ((count > 1) && ((unsigned long)dst & 2)) {
+		cx18_writew(cx, val2, dst);
+		count -= 2;
+		dst += 2;
+	}
+	while (count > 3) {
+		cx18_writel(cx, val4, dst);
+		count -= 4;
+		dst += 4;
+	}
+	if (count > 1) {
+		cx18_writew(cx, val2, dst);
+		count -= 2;
+		dst += 2;
+	}
+	if (count > 0)
+		cx18_writeb(cx, (u8) val, dst);
+}
+
+void cx18_sw1_irq_enable(struct cx18 *cx, u32 val)
+{
+	cx18_write_reg_expect(cx, val, SW1_INT_STATUS, ~val, val);
+	cx->sw1_irq_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | val;
+	cx18_write_reg(cx, cx->sw1_irq_mask, SW1_INT_ENABLE_PCI);
+}
+
+void cx18_sw1_irq_disable(struct cx18 *cx, u32 val)
+{
+	cx->sw1_irq_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) & ~val;
+	cx18_write_reg(cx, cx->sw1_irq_mask, SW1_INT_ENABLE_PCI);
+}
+
+void cx18_sw2_irq_enable(struct cx18 *cx, u32 val)
+{
+	cx18_write_reg_expect(cx, val, SW2_INT_STATUS, ~val, val);
+	cx->sw2_irq_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | val;
+	cx18_write_reg(cx, cx->sw2_irq_mask, SW2_INT_ENABLE_PCI);
+}
+
+void cx18_sw2_irq_disable(struct cx18 *cx, u32 val)
+{
+	cx->sw2_irq_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) & ~val;
+	cx18_write_reg(cx, cx->sw2_irq_mask, SW2_INT_ENABLE_PCI);
+}
+
+void cx18_sw2_irq_disable_cpu(struct cx18 *cx, u32 val)
+{
+	u32 r;
+	r = cx18_read_reg(cx, SW2_INT_ENABLE_CPU);
+	cx18_write_reg(cx, r & ~val, SW2_INT_ENABLE_CPU);
+}
+
+void cx18_setup_page(struct cx18 *cx, u32 addr)
+{
+	u32 val;
+	val = cx18_read_reg(cx, 0xD000F8);
+	val = (val & ~0x1f00) | ((addr >> 17) & 0x1f00);
+	cx18_write_reg(cx, val, 0xD000F8);
+}
diff --git a/drivers/media/pci/cx18/cx18-io.h b/drivers/media/pci/cx18/cx18-io.h
new file mode 100644
index 000000000..a3c96fb5d
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-io.h
@@ -0,0 +1,186 @@
+/*
+ *  cx18 driver PCI memory mapped IO access routines
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef CX18_IO_H
+#define CX18_IO_H
+
+#include "cx18-driver.h"
+
+/*
+ * Readback and retry of MMIO access for reliability:
+ * The concept was suggested by Steve Toth <stoth@linuxtv.org>.
+ * The implmentation is the fault of Andy Walls <awalls@md.metrocast.net>.
+ *
+ * *write* functions are implied to retry the mmio unless suffixed with _noretry
+ * *read* functions never retry the mmio (it never helps to do so)
+ */
+
+/* Non byteswapping memory mapped IO */
+static inline u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr)
+{
+	return __raw_readl(addr);
+}
+
+static inline
+void cx18_raw_writel_noretry(struct cx18 *cx, u32 val, void __iomem *addr)
+{
+	__raw_writel(val, addr);
+}
+
+static inline void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr)
+{
+	int i;
+	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
+		cx18_raw_writel_noretry(cx, val, addr);
+		if (val == cx18_raw_readl(cx, addr))
+			break;
+	}
+}
+
+/* Normal memory mapped IO */
+static inline u32 cx18_readl(struct cx18 *cx, const void __iomem *addr)
+{
+	return readl(addr);
+}
+
+static inline
+void cx18_writel_noretry(struct cx18 *cx, u32 val, void __iomem *addr)
+{
+	writel(val, addr);
+}
+
+static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr)
+{
+	int i;
+	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
+		cx18_writel_noretry(cx, val, addr);
+		if (val == cx18_readl(cx, addr))
+			break;
+	}
+}
+
+static inline
+void cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr,
+			u32 eval, u32 mask)
+{
+	int i;
+	u32 r;
+	eval &= mask;
+	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
+		cx18_writel_noretry(cx, val, addr);
+		r = cx18_readl(cx, addr);
+		if (r == 0xffffffff && eval != 0xffffffff)
+			continue;
+		if (eval == (r & mask))
+			break;
+	}
+}
+
+static inline u16 cx18_readw(struct cx18 *cx, const void __iomem *addr)
+{
+	return readw(addr);
+}
+
+static inline
+void cx18_writew_noretry(struct cx18 *cx, u16 val, void __iomem *addr)
+{
+	writew(val, addr);
+}
+
+static inline void cx18_writew(struct cx18 *cx, u16 val, void __iomem *addr)
+{
+	int i;
+	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
+		cx18_writew_noretry(cx, val, addr);
+		if (val == cx18_readw(cx, addr))
+			break;
+	}
+}
+
+static inline u8 cx18_readb(struct cx18 *cx, const void __iomem *addr)
+{
+	return readb(addr);
+}
+
+static inline
+void cx18_writeb_noretry(struct cx18 *cx, u8 val, void __iomem *addr)
+{
+	writeb(val, addr);
+}
+
+static inline void cx18_writeb(struct cx18 *cx, u8 val, void __iomem *addr)
+{
+	int i;
+	for (i = 0; i < CX18_MAX_MMIO_WR_RETRIES; i++) {
+		cx18_writeb_noretry(cx, val, addr);
+		if (val == cx18_readb(cx, addr))
+			break;
+	}
+}
+
+static inline
+void cx18_memcpy_fromio(struct cx18 *cx, void *to,
+			const void __iomem *from, unsigned int len)
+{
+	memcpy_fromio(to, from, len);
+}
+
+void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count);
+
+
+/* Access "register" region of CX23418 memory mapped I/O */
+static inline void cx18_write_reg_noretry(struct cx18 *cx, u32 val, u32 reg)
+{
+	cx18_writel_noretry(cx, val, cx->reg_mem + reg);
+}
+
+static inline void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg)
+{
+	cx18_writel(cx, val, cx->reg_mem + reg);
+}
+
+static inline void cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg,
+					 u32 eval, u32 mask)
+{
+	cx18_writel_expect(cx, val, cx->reg_mem + reg, eval, mask);
+}
+
+static inline u32 cx18_read_reg(struct cx18 *cx, u32 reg)
+{
+	return cx18_readl(cx, cx->reg_mem + reg);
+}
+
+
+/* Access "encoder memory" region of CX23418 memory mapped I/O */
+static inline void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr)
+{
+	cx18_writel(cx, val, cx->enc_mem + addr);
+}
+
+static inline u32 cx18_read_enc(struct cx18 *cx, u32 addr)
+{
+	return cx18_readl(cx, cx->enc_mem + addr);
+}
+
+void cx18_sw1_irq_enable(struct cx18 *cx, u32 val);
+void cx18_sw1_irq_disable(struct cx18 *cx, u32 val);
+void cx18_sw2_irq_enable(struct cx18 *cx, u32 val);
+void cx18_sw2_irq_disable(struct cx18 *cx, u32 val);
+void cx18_sw2_irq_disable_cpu(struct cx18 *cx, u32 val);
+void cx18_setup_page(struct cx18 *cx, u32 addr);
+
+#endif /* CX18_IO_H */
diff --git a/drivers/media/pci/cx18/cx18-ioctl.c b/drivers/media/pci/cx18/cx18-ioctl.c
new file mode 100644
index 000000000..80b902b12
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-ioctl.c
@@ -0,0 +1,1125 @@
+/*
+ *  cx18 ioctl system call
+ *
+ *  Derived from ivtv-ioctl.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-version.h"
+#include "cx18-mailbox.h"
+#include "cx18-i2c.h"
+#include "cx18-queue.h"
+#include "cx18-fileops.h"
+#include "cx18-vbi.h"
+#include "cx18-audio.h"
+#include "cx18-video.h"
+#include "cx18-streams.h"
+#include "cx18-ioctl.h"
+#include "cx18-gpio.h"
+#include "cx18-controls.h"
+#include "cx18-cards.h"
+#include "cx18-av-core.h"
+#include <media/tveeprom.h>
+#include <media/v4l2-event.h>
+
+u16 cx18_service2vbi(int type)
+{
+	switch (type) {
+	case V4L2_SLICED_TELETEXT_B:
+		return CX18_SLICED_TYPE_TELETEXT_B;
+	case V4L2_SLICED_CAPTION_525:
+		return CX18_SLICED_TYPE_CAPTION_525;
+	case V4L2_SLICED_WSS_625:
+		return CX18_SLICED_TYPE_WSS_625;
+	case V4L2_SLICED_VPS:
+		return CX18_SLICED_TYPE_VPS;
+	default:
+		return 0;
+	}
+}
+
+/* Check if VBI services are allowed on the (field, line) for the video std */
+static int valid_service_line(int field, int line, int is_pal)
+{
+	return (is_pal && line >= 6 &&
+		((field == 0 && line <= 23) || (field == 1 && line <= 22))) ||
+	       (!is_pal && line >= 10 && line < 22);
+}
+
+/*
+ * For a (field, line, std) and inbound potential set of services for that line,
+ * return the first valid service of those passed in the incoming set for that
+ * line in priority order:
+ * CC, VPS, or WSS over TELETEXT for well known lines
+ * TELETEXT, before VPS, before CC, before WSS, for other lines
+ */
+static u16 select_service_from_set(int field, int line, u16 set, int is_pal)
+{
+	u16 valid_set = (is_pal ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525);
+	int i;
+
+	set = set & valid_set;
+	if (set == 0 || !valid_service_line(field, line, is_pal))
+		return 0;
+	if (!is_pal) {
+		if (line == 21 && (set & V4L2_SLICED_CAPTION_525))
+			return V4L2_SLICED_CAPTION_525;
+	} else {
+		if (line == 16 && field == 0 && (set & V4L2_SLICED_VPS))
+			return V4L2_SLICED_VPS;
+		if (line == 23 && field == 0 && (set & V4L2_SLICED_WSS_625))
+			return V4L2_SLICED_WSS_625;
+		if (line == 23)
+			return 0;
+	}
+	for (i = 0; i < 32; i++) {
+		if ((1 << i) & set)
+			return 1 << i;
+	}
+	return 0;
+}
+
+/*
+ * Expand the service_set of *fmt into valid service_lines for the std,
+ * and clear the passed in fmt->service_set
+ */
+void cx18_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal)
+{
+	u16 set = fmt->service_set;
+	int f, l;
+
+	fmt->service_set = 0;
+	for (f = 0; f < 2; f++) {
+		for (l = 0; l < 24; l++)
+			fmt->service_lines[f][l] = select_service_from_set(f, l, set, is_pal);
+	}
+}
+
+/*
+ * Sanitize the service_lines in *fmt per the video std, and return 1
+ * if any service_line is left as valid after santization
+ */
+static int check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal)
+{
+	int f, l;
+	u16 set = 0;
+
+	for (f = 0; f < 2; f++) {
+		for (l = 0; l < 24; l++) {
+			fmt->service_lines[f][l] = select_service_from_set(f, l, fmt->service_lines[f][l], is_pal);
+			set |= fmt->service_lines[f][l];
+		}
+	}
+	return set != 0;
+}
+
+/* Compute the service_set from the assumed valid service_lines of *fmt */
+u16 cx18_get_service_set(struct v4l2_sliced_vbi_format *fmt)
+{
+	int f, l;
+	u16 set = 0;
+
+	for (f = 0; f < 2; f++) {
+		for (l = 0; l < 24; l++)
+			set |= fmt->service_lines[f][l];
+	}
+	return set;
+}
+
+static int cx18_g_fmt_vid_cap(struct file *file, void *fh,
+				struct v4l2_format *fmt)
+{
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+
+	pixfmt->width = cx->cxhdl.width;
+	pixfmt->height = cx->cxhdl.height;
+	pixfmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+	pixfmt->field = V4L2_FIELD_INTERLACED;
+	if (id->type == CX18_ENC_STREAM_TYPE_YUV) {
+		pixfmt->pixelformat = s->pixelformat;
+		pixfmt->sizeimage = s->vb_bytes_per_frame;
+		pixfmt->bytesperline = s->vb_bytes_per_line;
+	} else {
+		pixfmt->pixelformat = V4L2_PIX_FMT_MPEG;
+		pixfmt->sizeimage = 128 * 1024;
+		pixfmt->bytesperline = 0;
+	}
+	return 0;
+}
+
+static int cx18_g_fmt_vbi_cap(struct file *file, void *fh,
+				struct v4l2_format *fmt)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+	struct v4l2_vbi_format *vbifmt = &fmt->fmt.vbi;
+
+	vbifmt->sampling_rate = 27000000;
+	vbifmt->offset = 248; /* FIXME - slightly wrong for both 50 & 60 Hz */
+	vbifmt->samples_per_line = VBI_ACTIVE_SAMPLES - 4;
+	vbifmt->sample_format = V4L2_PIX_FMT_GREY;
+	vbifmt->start[0] = cx->vbi.start[0];
+	vbifmt->start[1] = cx->vbi.start[1];
+	vbifmt->count[0] = vbifmt->count[1] = cx->vbi.count;
+	vbifmt->flags = 0;
+	vbifmt->reserved[0] = 0;
+	vbifmt->reserved[1] = 0;
+	return 0;
+}
+
+static int cx18_g_fmt_sliced_vbi_cap(struct file *file, void *fh,
+					struct v4l2_format *fmt)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+	struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced;
+
+	/* sane, V4L2 spec compliant, defaults */
+	vbifmt->reserved[0] = 0;
+	vbifmt->reserved[1] = 0;
+	vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36;
+	memset(vbifmt->service_lines, 0, sizeof(vbifmt->service_lines));
+	vbifmt->service_set = 0;
+
+	/*
+	 * Fetch the configured service_lines and total service_set from the
+	 * digitizer/slicer.  Note, cx18_av_vbi() wipes the passed in
+	 * fmt->fmt.sliced under valid calling conditions
+	 */
+	if (v4l2_subdev_call(cx->sd_av, vbi, g_sliced_fmt, &fmt->fmt.sliced))
+		return -EINVAL;
+
+	vbifmt->service_set = cx18_get_service_set(vbifmt);
+	return 0;
+}
+
+static int cx18_try_fmt_vid_cap(struct file *file, void *fh,
+				struct v4l2_format *fmt)
+{
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18 *cx = id->cx;
+	int w = fmt->fmt.pix.width;
+	int h = fmt->fmt.pix.height;
+	int min_h = 2;
+
+	w = min(w, 720);
+	w = max(w, 2);
+	if (id->type == CX18_ENC_STREAM_TYPE_YUV) {
+		/* YUV height must be a multiple of 32 */
+		h &= ~0x1f;
+		min_h = 32;
+	}
+	h = min(h, cx->is_50hz ? 576 : 480);
+	h = max(h, min_h);
+
+	fmt->fmt.pix.width = w;
+	fmt->fmt.pix.height = h;
+	return 0;
+}
+
+static int cx18_try_fmt_vbi_cap(struct file *file, void *fh,
+				struct v4l2_format *fmt)
+{
+	return cx18_g_fmt_vbi_cap(file, fh, fmt);
+}
+
+static int cx18_try_fmt_sliced_vbi_cap(struct file *file, void *fh,
+					struct v4l2_format *fmt)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+	struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced;
+
+	vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36;
+	vbifmt->reserved[0] = 0;
+	vbifmt->reserved[1] = 0;
+
+	/* If given a service set, expand it validly & clear passed in set */
+	if (vbifmt->service_set)
+		cx18_expand_service_set(vbifmt, cx->is_50hz);
+	/* Sanitize the service_lines, and compute the new set if any valid */
+	if (check_service_set(vbifmt, cx->is_50hz))
+		vbifmt->service_set = cx18_get_service_set(vbifmt);
+	return 0;
+}
+
+static int cx18_s_fmt_vid_cap(struct file *file, void *fh,
+				struct v4l2_format *fmt)
+{
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18 *cx = id->cx;
+	struct v4l2_subdev_format format = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
+	struct cx18_stream *s = &cx->streams[id->type];
+	int ret;
+	int w, h;
+
+	ret = cx18_try_fmt_vid_cap(file, fh, fmt);
+	if (ret)
+		return ret;
+	w = fmt->fmt.pix.width;
+	h = fmt->fmt.pix.height;
+
+	if (cx->cxhdl.width == w && cx->cxhdl.height == h &&
+	    s->pixelformat == fmt->fmt.pix.pixelformat)
+		return 0;
+
+	if (atomic_read(&cx->ana_capturing) > 0)
+		return -EBUSY;
+
+	s->pixelformat = fmt->fmt.pix.pixelformat;
+	/* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2)))
+	   UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */
+	if (s->pixelformat == V4L2_PIX_FMT_HM12) {
+		s->vb_bytes_per_frame = h * 720 * 3 / 2;
+		s->vb_bytes_per_line = 720; /* First plane */
+	} else {
+		s->vb_bytes_per_frame = h * 720 * 2;
+		s->vb_bytes_per_line = 1440; /* Packed */
+	}
+
+	format.format.width = cx->cxhdl.width = w;
+	format.format.height = cx->cxhdl.height = h;
+	format.format.code = MEDIA_BUS_FMT_FIXED;
+	v4l2_subdev_call(cx->sd_av, pad, set_fmt, NULL, &format);
+	return cx18_g_fmt_vid_cap(file, fh, fmt);
+}
+
+static int cx18_s_fmt_vbi_cap(struct file *file, void *fh,
+				struct v4l2_format *fmt)
+{
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18 *cx = id->cx;
+	int ret;
+
+	/*
+	 * Changing the Encoder's Raw VBI parameters won't have any effect
+	 * if any analog capture is ongoing
+	 */
+	if (!cx18_raw_vbi(cx) && atomic_read(&cx->ana_capturing) > 0)
+		return -EBUSY;
+
+	/*
+	 * Set the digitizer registers for raw active VBI.
+	 * Note cx18_av_vbi_wipes out a lot of the passed in fmt under valid
+	 * calling conditions
+	 */
+	ret = v4l2_subdev_call(cx->sd_av, vbi, s_raw_fmt, &fmt->fmt.vbi);
+	if (ret)
+		return ret;
+
+	/* Store our new v4l2 (non-)sliced VBI state */
+	cx->vbi.sliced_in->service_set = 0;
+	cx->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE;
+
+	return cx18_g_fmt_vbi_cap(file, fh, fmt);
+}
+
+static int cx18_s_fmt_sliced_vbi_cap(struct file *file, void *fh,
+					struct v4l2_format *fmt)
+{
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18 *cx = id->cx;
+	int ret;
+	struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced;
+
+	cx18_try_fmt_sliced_vbi_cap(file, fh, fmt);
+
+	/*
+	 * Changing the Encoder's Raw VBI parameters won't have any effect
+	 * if any analog capture is ongoing
+	 */
+	if (cx18_raw_vbi(cx) && atomic_read(&cx->ana_capturing) > 0)
+		return -EBUSY;
+
+	/*
+	 * Set the service_lines requested in the digitizer/slicer registers.
+	 * Note, cx18_av_vbi() wipes some "impossible" service lines in the
+	 * passed in fmt->fmt.sliced under valid calling conditions
+	 */
+	ret = v4l2_subdev_call(cx->sd_av, vbi, s_sliced_fmt, &fmt->fmt.sliced);
+	if (ret)
+		return ret;
+	/* Store our current v4l2 sliced VBI settings */
+	cx->vbi.in.type =  V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
+	memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in));
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int cx18_g_register(struct file *file, void *fh,
+				struct v4l2_dbg_register *reg)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	if (reg->reg & 0x3)
+		return -EINVAL;
+	if (reg->reg >= CX18_MEM_OFFSET + CX18_MEM_SIZE)
+		return -EINVAL;
+	reg->size = 4;
+	reg->val = cx18_read_enc(cx, reg->reg);
+	return 0;
+}
+
+static int cx18_s_register(struct file *file, void *fh,
+				const struct v4l2_dbg_register *reg)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	if (reg->reg & 0x3)
+		return -EINVAL;
+	if (reg->reg >= CX18_MEM_OFFSET + CX18_MEM_SIZE)
+		return -EINVAL;
+	cx18_write_enc(cx, reg->val, reg->reg);
+	return 0;
+}
+#endif
+
+static int cx18_querycap(struct file *file, void *fh,
+				struct v4l2_capability *vcap)
+{
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18_stream *s = video_drvdata(file);
+	struct cx18 *cx = id->cx;
+
+	strlcpy(vcap->driver, CX18_DRIVER_NAME, sizeof(vcap->driver));
+	strlcpy(vcap->card, cx->card_name, sizeof(vcap->card));
+	snprintf(vcap->bus_info, sizeof(vcap->bus_info),
+		 "PCI:%s", pci_name(cx->pci_dev));
+	vcap->capabilities = cx->v4l2_cap;	/* capabilities */
+	vcap->device_caps = s->v4l2_dev_caps;	/* device capabilities */
+	vcap->capabilities |= V4L2_CAP_DEVICE_CAPS;
+	return 0;
+}
+
+static int cx18_enumaudio(struct file *file, void *fh, struct v4l2_audio *vin)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	return cx18_get_audio_input(cx, vin->index, vin);
+}
+
+static int cx18_g_audio(struct file *file, void *fh, struct v4l2_audio *vin)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	vin->index = cx->audio_input;
+	return cx18_get_audio_input(cx, vin->index, vin);
+}
+
+static int cx18_s_audio(struct file *file, void *fh, const struct v4l2_audio *vout)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	if (vout->index >= cx->nof_audio_inputs)
+		return -EINVAL;
+	cx->audio_input = vout->index;
+	cx18_audio_set_io(cx);
+	return 0;
+}
+
+static int cx18_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	/* set it to defaults from our table */
+	return cx18_get_input(cx, vin->index, vin);
+}
+
+static int cx18_cropcap(struct file *file, void *fh,
+			struct v4l2_cropcap *cropcap)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	if (cropcap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	cropcap->pixelaspect.numerator = cx->is_50hz ? 54 : 11;
+	cropcap->pixelaspect.denominator = cx->is_50hz ? 59 : 10;
+	return 0;
+}
+
+static int cx18_g_selection(struct file *file, void *fh,
+			    struct v4l2_selection *sel)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+	case V4L2_SEL_TGT_CROP_DEFAULT:
+		sel->r.top = sel->r.left = 0;
+		sel->r.width = 720;
+		sel->r.height = cx->is_50hz ? 576 : 480;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int cx18_enum_fmt_vid_cap(struct file *file, void *fh,
+					struct v4l2_fmtdesc *fmt)
+{
+	static const struct v4l2_fmtdesc formats[] = {
+		{ 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, 0,
+		  "HM12 (YUV 4:1:1)", V4L2_PIX_FMT_HM12, { 0, 0, 0, 0 }
+		},
+		{ 1, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FMT_FLAG_COMPRESSED,
+		  "MPEG", V4L2_PIX_FMT_MPEG, { 0, 0, 0, 0 }
+		},
+		{ 2, V4L2_BUF_TYPE_VIDEO_CAPTURE, 0,
+		  "UYVY 4:2:2", V4L2_PIX_FMT_UYVY, { 0, 0, 0, 0 }
+		},
+	};
+
+	if (fmt->index > ARRAY_SIZE(formats) - 1)
+		return -EINVAL;
+	*fmt = formats[fmt->index];
+	return 0;
+}
+
+static int cx18_g_input(struct file *file, void *fh, unsigned int *i)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	*i = cx->active_input;
+	return 0;
+}
+
+int cx18_s_input(struct file *file, void *fh, unsigned int inp)
+{
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18 *cx = id->cx;
+	v4l2_std_id std = V4L2_STD_ALL;
+	const struct cx18_card_video_input *card_input =
+				cx->card->video_inputs + inp;
+
+	if (inp >= cx->nof_inputs)
+		return -EINVAL;
+
+	if (inp == cx->active_input) {
+		CX18_DEBUG_INFO("Input unchanged\n");
+		return 0;
+	}
+
+	CX18_DEBUG_INFO("Changing input from %d to %d\n",
+			cx->active_input, inp);
+
+	cx->active_input = inp;
+	/* Set the audio input to whatever is appropriate for the input type. */
+	cx->audio_input = cx->card->video_inputs[inp].audio_index;
+	if (card_input->video_type == V4L2_INPUT_TYPE_TUNER)
+		std = cx->tuner_std;
+	cx->streams[CX18_ENC_STREAM_TYPE_MPG].video_dev.tvnorms = std;
+	cx->streams[CX18_ENC_STREAM_TYPE_YUV].video_dev.tvnorms = std;
+	cx->streams[CX18_ENC_STREAM_TYPE_VBI].video_dev.tvnorms = std;
+
+	/* prevent others from messing with the streams until
+	   we're finished changing inputs. */
+	cx18_mute(cx);
+	cx18_video_set_io(cx);
+	cx18_audio_set_io(cx);
+	cx18_unmute(cx);
+	return 0;
+}
+
+static int cx18_g_frequency(struct file *file, void *fh,
+				struct v4l2_frequency *vf)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	if (vf->tuner != 0)
+		return -EINVAL;
+
+	cx18_call_all(cx, tuner, g_frequency, vf);
+	return 0;
+}
+
+int cx18_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf)
+{
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18 *cx = id->cx;
+
+	if (vf->tuner != 0)
+		return -EINVAL;
+
+	cx18_mute(cx);
+	CX18_DEBUG_INFO("v4l2 ioctl: set frequency %d\n", vf->frequency);
+	cx18_call_all(cx, tuner, s_frequency, vf);
+	cx18_unmute(cx);
+	return 0;
+}
+
+static int cx18_g_std(struct file *file, void *fh, v4l2_std_id *std)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	*std = cx->std;
+	return 0;
+}
+
+int cx18_s_std(struct file *file, void *fh, v4l2_std_id std)
+{
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18 *cx = id->cx;
+
+	if ((std & V4L2_STD_ALL) == 0)
+		return -EINVAL;
+
+	if (std == cx->std)
+		return 0;
+
+	if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) ||
+	    atomic_read(&cx->ana_capturing) > 0) {
+		/* Switching standard would turn off the radio or mess
+		   with already running streams, prevent that by
+		   returning EBUSY. */
+		return -EBUSY;
+	}
+
+	cx->std = std;
+	cx->is_60hz = (std & V4L2_STD_525_60) ? 1 : 0;
+	cx->is_50hz = !cx->is_60hz;
+	cx2341x_handler_set_50hz(&cx->cxhdl, cx->is_50hz);
+	cx->cxhdl.width = 720;
+	cx->cxhdl.height = cx->is_50hz ? 576 : 480;
+	cx->vbi.count = cx->is_50hz ? 18 : 12;
+	cx->vbi.start[0] = cx->is_50hz ? 6 : 10;
+	cx->vbi.start[1] = cx->is_50hz ? 318 : 273;
+	CX18_DEBUG_INFO("Switching standard to %llx.\n",
+			(unsigned long long) cx->std);
+
+	/* Tuner */
+	cx18_call_all(cx, video, s_std, cx->std);
+	return 0;
+}
+
+static int cx18_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *vt)
+{
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18 *cx = id->cx;
+
+	if (vt->index != 0)
+		return -EINVAL;
+
+	cx18_call_all(cx, tuner, s_tuner, vt);
+	return 0;
+}
+
+static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	if (vt->index != 0)
+		return -EINVAL;
+
+	cx18_call_all(cx, tuner, g_tuner, vt);
+
+	if (vt->type == V4L2_TUNER_RADIO)
+		strlcpy(vt->name, "cx18 Radio Tuner", sizeof(vt->name));
+	else
+		strlcpy(vt->name, "cx18 TV Tuner", sizeof(vt->name));
+	return 0;
+}
+
+static int cx18_g_sliced_vbi_cap(struct file *file, void *fh,
+					struct v4l2_sliced_vbi_cap *cap)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+	int set = cx->is_50hz ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525;
+	int f, l;
+
+	if (cap->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
+		return -EINVAL;
+
+	cap->service_set = 0;
+	for (f = 0; f < 2; f++) {
+		for (l = 0; l < 24; l++) {
+			if (valid_service_line(f, l, cx->is_50hz)) {
+				/*
+				 * We can find all v4l2 supported vbi services
+				 * for the standard, on a valid line for the std
+				 */
+				cap->service_lines[f][l] = set;
+				cap->service_set |= set;
+			} else
+				cap->service_lines[f][l] = 0;
+		}
+	}
+	for (f = 0; f < 3; f++)
+		cap->reserved[f] = 0;
+	return 0;
+}
+
+static int _cx18_process_idx_data(struct cx18_buffer *buf,
+				  struct v4l2_enc_idx *idx)
+{
+	int consumed, remaining;
+	struct v4l2_enc_idx_entry *e_idx;
+	struct cx18_enc_idx_entry *e_buf;
+
+	/* Frame type lookup: 1=I, 2=P, 4=B */
+	const int mapping[8] = {
+		-1, V4L2_ENC_IDX_FRAME_I, V4L2_ENC_IDX_FRAME_P,
+		-1, V4L2_ENC_IDX_FRAME_B, -1, -1, -1
+	};
+
+	/*
+	 * Assumption here is that a buf holds an integral number of
+	 * struct cx18_enc_idx_entry objects and is properly aligned.
+	 * This is enforced by the module options on IDX buffer sizes.
+	 */
+	remaining = buf->bytesused - buf->readpos;
+	consumed = 0;
+	e_idx = &idx->entry[idx->entries];
+	e_buf = (struct cx18_enc_idx_entry *) &buf->buf[buf->readpos];
+
+	while (remaining >= sizeof(struct cx18_enc_idx_entry) &&
+	       idx->entries < V4L2_ENC_IDX_ENTRIES) {
+
+		e_idx->offset = (((u64) le32_to_cpu(e_buf->offset_high)) << 32)
+				| le32_to_cpu(e_buf->offset_low);
+
+		e_idx->pts = (((u64) (le32_to_cpu(e_buf->pts_high) & 1)) << 32)
+			     | le32_to_cpu(e_buf->pts_low);
+
+		e_idx->length = le32_to_cpu(e_buf->length);
+
+		e_idx->flags = mapping[le32_to_cpu(e_buf->flags) & 0x7];
+
+		e_idx->reserved[0] = 0;
+		e_idx->reserved[1] = 0;
+
+		idx->entries++;
+		e_idx = &idx->entry[idx->entries];
+		e_buf++;
+
+		remaining -= sizeof(struct cx18_enc_idx_entry);
+		consumed += sizeof(struct cx18_enc_idx_entry);
+	}
+
+	/* Swallow any partial entries at the end, if there are any */
+	if (remaining > 0 && remaining < sizeof(struct cx18_enc_idx_entry))
+		consumed += remaining;
+
+	buf->readpos += consumed;
+	return consumed;
+}
+
+static int cx18_process_idx_data(struct cx18_stream *s, struct cx18_mdl *mdl,
+				 struct v4l2_enc_idx *idx)
+{
+	if (s->type != CX18_ENC_STREAM_TYPE_IDX)
+		return -EINVAL;
+
+	if (mdl->curr_buf == NULL)
+		mdl->curr_buf = list_first_entry(&mdl->buf_list,
+						 struct cx18_buffer, list);
+
+	if (list_entry_is_past_end(mdl->curr_buf, &mdl->buf_list, list)) {
+		/*
+		 * For some reason we've exhausted the buffers, but the MDL
+		 * object still said some data was unread.
+		 * Fix that and bail out.
+		 */
+		mdl->readpos = mdl->bytesused;
+		return 0;
+	}
+
+	list_for_each_entry_from(mdl->curr_buf, &mdl->buf_list, list) {
+
+		/* Skip any empty buffers in the MDL */
+		if (mdl->curr_buf->readpos >= mdl->curr_buf->bytesused)
+			continue;
+
+		mdl->readpos += _cx18_process_idx_data(mdl->curr_buf, idx);
+
+		/* exit when MDL drained or request satisfied */
+		if (idx->entries >= V4L2_ENC_IDX_ENTRIES ||
+		    mdl->curr_buf->readpos < mdl->curr_buf->bytesused ||
+		    mdl->readpos >= mdl->bytesused)
+			break;
+	}
+	return 0;
+}
+
+static int cx18_g_enc_index(struct file *file, void *fh,
+				struct v4l2_enc_idx *idx)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+	struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+	s32 tmp;
+	struct cx18_mdl *mdl;
+
+	if (!cx18_stream_enabled(s)) /* Module options inhibited IDX stream */
+		return -EINVAL;
+
+	/* Compute the best case number of entries we can buffer */
+	tmp = s->buffers -
+			  s->bufs_per_mdl * CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN;
+	if (tmp <= 0)
+		tmp = 1;
+	tmp = tmp * s->buf_size / sizeof(struct cx18_enc_idx_entry);
+
+	/* Fill out the header of the return structure */
+	idx->entries = 0;
+	idx->entries_cap = tmp;
+	memset(idx->reserved, 0, sizeof(idx->reserved));
+
+	/* Pull IDX MDLs and buffers from q_full and populate the entries */
+	do {
+		mdl = cx18_dequeue(s, &s->q_full);
+		if (mdl == NULL) /* No more IDX data right now */
+			break;
+
+		/* Extract the Index entry data from the MDL and buffers */
+		cx18_process_idx_data(s, mdl, idx);
+		if (mdl->readpos < mdl->bytesused) {
+			/* We finished with data remaining, push the MDL back */
+			cx18_push(s, mdl, &s->q_full);
+			break;
+		}
+
+		/* We drained this MDL, schedule it to go to the firmware */
+		cx18_enqueue(s, mdl, &s->q_free);
+
+	} while (idx->entries < V4L2_ENC_IDX_ENTRIES);
+
+	/* Tell the work handler to send free IDX MDLs to the firmware */
+	cx18_stream_load_fw_queue(s);
+	return 0;
+}
+
+static struct videobuf_queue *cx18_vb_queue(struct cx18_open_id *id)
+{
+	struct videobuf_queue *q = NULL;
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+
+	switch (s->vb_type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		q = &s->vbuf_q;
+		break;
+	case V4L2_BUF_TYPE_VBI_CAPTURE:
+		break;
+	default:
+		break;
+	}
+	return q;
+}
+
+static int cx18_streamon(struct file *file, void *priv,
+	enum v4l2_buf_type type)
+{
+	struct cx18_open_id *id = file->private_data;
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+
+	/* Start the hardware only if we're the video device */
+	if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+		(s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE))
+		return -EINVAL;
+
+	if (id->type != CX18_ENC_STREAM_TYPE_YUV)
+		return -EINVAL;
+
+	/* Establish a buffer timeout */
+	mod_timer(&s->vb_timeout, msecs_to_jiffies(2000) + jiffies);
+
+	return videobuf_streamon(cx18_vb_queue(id));
+}
+
+static int cx18_streamoff(struct file *file, void *priv,
+	enum v4l2_buf_type type)
+{
+	struct cx18_open_id *id = file->private_data;
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+
+	/* Start the hardware only if we're the video device */
+	if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+		(s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE))
+		return -EINVAL;
+
+	if (id->type != CX18_ENC_STREAM_TYPE_YUV)
+		return -EINVAL;
+
+	return videobuf_streamoff(cx18_vb_queue(id));
+}
+
+static int cx18_reqbufs(struct file *file, void *priv,
+	struct v4l2_requestbuffers *rb)
+{
+	struct cx18_open_id *id = file->private_data;
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+
+	if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+		(s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE))
+		return -EINVAL;
+
+	return videobuf_reqbufs(cx18_vb_queue(id), rb);
+}
+
+static int cx18_querybuf(struct file *file, void *priv,
+	struct v4l2_buffer *b)
+{
+	struct cx18_open_id *id = file->private_data;
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+
+	if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+		(s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE))
+		return -EINVAL;
+
+	return videobuf_querybuf(cx18_vb_queue(id), b);
+}
+
+static int cx18_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
+{
+	struct cx18_open_id *id = file->private_data;
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+
+	if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+		(s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE))
+		return -EINVAL;
+
+	return videobuf_qbuf(cx18_vb_queue(id), b);
+}
+
+static int cx18_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
+{
+	struct cx18_open_id *id = file->private_data;
+	struct cx18 *cx = id->cx;
+	struct cx18_stream *s = &cx->streams[id->type];
+
+	if ((s->vb_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+		(s->vb_type != V4L2_BUF_TYPE_VBI_CAPTURE))
+		return -EINVAL;
+
+	return videobuf_dqbuf(cx18_vb_queue(id), b, file->f_flags & O_NONBLOCK);
+}
+
+static int cx18_encoder_cmd(struct file *file, void *fh,
+				struct v4l2_encoder_cmd *enc)
+{
+	struct cx18_open_id *id = fh2id(fh);
+	struct cx18 *cx = id->cx;
+	u32 h;
+
+	switch (enc->cmd) {
+	case V4L2_ENC_CMD_START:
+		CX18_DEBUG_IOCTL("V4L2_ENC_CMD_START\n");
+		enc->flags = 0;
+		return cx18_start_capture(id);
+
+	case V4L2_ENC_CMD_STOP:
+		CX18_DEBUG_IOCTL("V4L2_ENC_CMD_STOP\n");
+		enc->flags &= V4L2_ENC_CMD_STOP_AT_GOP_END;
+		cx18_stop_capture(id,
+				  enc->flags & V4L2_ENC_CMD_STOP_AT_GOP_END);
+		break;
+
+	case V4L2_ENC_CMD_PAUSE:
+		CX18_DEBUG_IOCTL("V4L2_ENC_CMD_PAUSE\n");
+		enc->flags = 0;
+		if (!atomic_read(&cx->ana_capturing))
+			return -EPERM;
+		if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags))
+			return 0;
+		h = cx18_find_handle(cx);
+		if (h == CX18_INVALID_TASK_HANDLE) {
+			CX18_ERR("Can't find valid task handle for V4L2_ENC_CMD_PAUSE\n");
+			return -EBADFD;
+		}
+		cx18_mute(cx);
+		cx18_vapi(cx, CX18_CPU_CAPTURE_PAUSE, 1, h);
+		break;
+
+	case V4L2_ENC_CMD_RESUME:
+		CX18_DEBUG_IOCTL("V4L2_ENC_CMD_RESUME\n");
+		enc->flags = 0;
+		if (!atomic_read(&cx->ana_capturing))
+			return -EPERM;
+		if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags))
+			return 0;
+		h = cx18_find_handle(cx);
+		if (h == CX18_INVALID_TASK_HANDLE) {
+			CX18_ERR("Can't find valid task handle for V4L2_ENC_CMD_RESUME\n");
+			return -EBADFD;
+		}
+		cx18_vapi(cx, CX18_CPU_CAPTURE_RESUME, 1, h);
+		cx18_unmute(cx);
+		break;
+
+	default:
+		CX18_DEBUG_IOCTL("Unknown cmd %d\n", enc->cmd);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int cx18_try_encoder_cmd(struct file *file, void *fh,
+				struct v4l2_encoder_cmd *enc)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	switch (enc->cmd) {
+	case V4L2_ENC_CMD_START:
+		CX18_DEBUG_IOCTL("V4L2_ENC_CMD_START\n");
+		enc->flags = 0;
+		break;
+
+	case V4L2_ENC_CMD_STOP:
+		CX18_DEBUG_IOCTL("V4L2_ENC_CMD_STOP\n");
+		enc->flags &= V4L2_ENC_CMD_STOP_AT_GOP_END;
+		break;
+
+	case V4L2_ENC_CMD_PAUSE:
+		CX18_DEBUG_IOCTL("V4L2_ENC_CMD_PAUSE\n");
+		enc->flags = 0;
+		break;
+
+	case V4L2_ENC_CMD_RESUME:
+		CX18_DEBUG_IOCTL("V4L2_ENC_CMD_RESUME\n");
+		enc->flags = 0;
+		break;
+
+	default:
+		CX18_DEBUG_IOCTL("Unknown cmd %d\n", enc->cmd);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int cx18_log_status(struct file *file, void *fh)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+	struct v4l2_input vidin;
+	struct v4l2_audio audin;
+	int i;
+
+	CX18_INFO("Version: %s  Card: %s\n", CX18_VERSION, cx->card_name);
+	if (cx->hw_flags & CX18_HW_TVEEPROM) {
+		struct tveeprom tv;
+
+		cx18_read_eeprom(cx, &tv);
+	}
+	cx18_call_all(cx, core, log_status);
+	cx18_get_input(cx, cx->active_input, &vidin);
+	cx18_get_audio_input(cx, cx->audio_input, &audin);
+	CX18_INFO("Video Input: %s\n", vidin.name);
+	CX18_INFO("Audio Input: %s\n", audin.name);
+	mutex_lock(&cx->gpio_lock);
+	CX18_INFO("GPIO:  direction 0x%08x, value 0x%08x\n",
+		cx->gpio_dir, cx->gpio_val);
+	mutex_unlock(&cx->gpio_lock);
+	CX18_INFO("Tuner: %s\n",
+		test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) ?  "Radio" : "TV");
+	v4l2_ctrl_handler_log_status(&cx->cxhdl.hdl, cx->v4l2_dev.name);
+	CX18_INFO("Status flags: 0x%08lx\n", cx->i_flags);
+	for (i = 0; i < CX18_MAX_STREAMS; i++) {
+		struct cx18_stream *s = &cx->streams[i];
+
+		if (s->video_dev.v4l2_dev == NULL || s->buffers == 0)
+			continue;
+		CX18_INFO("Stream %s: status 0x%04lx, %d%% of %d KiB (%d buffers) in use\n",
+			  s->name, s->s_flags,
+			  atomic_read(&s->q_full.depth) * s->bufs_per_mdl * 100
+			   / s->buffers,
+			  (s->buffers * s->buf_size) / 1024, s->buffers);
+	}
+	CX18_INFO("Read MPEG/VBI: %lld/%lld bytes\n",
+			(long long)cx->mpg_data_received,
+			(long long)cx->vbi_data_inserted);
+	return 0;
+}
+
+static long cx18_default(struct file *file, void *fh, bool valid_prio,
+			 unsigned int cmd, void *arg)
+{
+	struct cx18 *cx = fh2id(fh)->cx;
+
+	switch (cmd) {
+	case VIDIOC_INT_RESET: {
+		u32 val = *(u32 *)arg;
+
+		if ((val == 0) || (val & 0x01))
+			cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL, core, reset,
+				     (u32) CX18_GPIO_RESET_Z8F0811);
+		break;
+	}
+
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops cx18_ioctl_ops = {
+	.vidioc_querycap                = cx18_querycap,
+	.vidioc_s_audio                 = cx18_s_audio,
+	.vidioc_g_audio                 = cx18_g_audio,
+	.vidioc_enumaudio               = cx18_enumaudio,
+	.vidioc_enum_input              = cx18_enum_input,
+	.vidioc_cropcap                 = cx18_cropcap,
+	.vidioc_g_selection             = cx18_g_selection,
+	.vidioc_g_input                 = cx18_g_input,
+	.vidioc_s_input                 = cx18_s_input,
+	.vidioc_g_frequency             = cx18_g_frequency,
+	.vidioc_s_frequency             = cx18_s_frequency,
+	.vidioc_s_tuner                 = cx18_s_tuner,
+	.vidioc_g_tuner                 = cx18_g_tuner,
+	.vidioc_g_enc_index             = cx18_g_enc_index,
+	.vidioc_g_std                   = cx18_g_std,
+	.vidioc_s_std                   = cx18_s_std,
+	.vidioc_log_status              = cx18_log_status,
+	.vidioc_enum_fmt_vid_cap        = cx18_enum_fmt_vid_cap,
+	.vidioc_encoder_cmd             = cx18_encoder_cmd,
+	.vidioc_try_encoder_cmd         = cx18_try_encoder_cmd,
+	.vidioc_g_fmt_vid_cap           = cx18_g_fmt_vid_cap,
+	.vidioc_g_fmt_vbi_cap           = cx18_g_fmt_vbi_cap,
+	.vidioc_g_fmt_sliced_vbi_cap    = cx18_g_fmt_sliced_vbi_cap,
+	.vidioc_s_fmt_vid_cap           = cx18_s_fmt_vid_cap,
+	.vidioc_s_fmt_vbi_cap           = cx18_s_fmt_vbi_cap,
+	.vidioc_s_fmt_sliced_vbi_cap    = cx18_s_fmt_sliced_vbi_cap,
+	.vidioc_try_fmt_vid_cap         = cx18_try_fmt_vid_cap,
+	.vidioc_try_fmt_vbi_cap         = cx18_try_fmt_vbi_cap,
+	.vidioc_try_fmt_sliced_vbi_cap  = cx18_try_fmt_sliced_vbi_cap,
+	.vidioc_g_sliced_vbi_cap        = cx18_g_sliced_vbi_cap,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register              = cx18_g_register,
+	.vidioc_s_register              = cx18_s_register,
+#endif
+	.vidioc_default                 = cx18_default,
+	.vidioc_streamon                = cx18_streamon,
+	.vidioc_streamoff               = cx18_streamoff,
+	.vidioc_reqbufs                 = cx18_reqbufs,
+	.vidioc_querybuf                = cx18_querybuf,
+	.vidioc_qbuf                    = cx18_qbuf,
+	.vidioc_dqbuf                   = cx18_dqbuf,
+	.vidioc_subscribe_event		= v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
+};
+
+void cx18_set_funcs(struct video_device *vdev)
+{
+	vdev->ioctl_ops = &cx18_ioctl_ops;
+}
diff --git a/drivers/media/pci/cx18/cx18-ioctl.h b/drivers/media/pci/cx18/cx18-ioctl.h
new file mode 100644
index 000000000..413129004
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-ioctl.h
@@ -0,0 +1,26 @@
+/*
+ *  cx18 ioctl system call
+ *
+ *  Derived from ivtv-ioctl.h
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+u16 cx18_service2vbi(int type);
+void cx18_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal);
+u16 cx18_get_service_set(struct v4l2_sliced_vbi_format *fmt);
+void cx18_set_funcs(struct video_device *vdev);
+int cx18_s_std(struct file *file, void *fh, v4l2_std_id std);
+int cx18_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *vf);
+int cx18_s_input(struct file *file, void *fh, unsigned int inp);
diff --git a/drivers/media/pci/cx18/cx18-irq.c b/drivers/media/pci/cx18/cx18-irq.c
new file mode 100644
index 000000000..ff33ffda0
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-irq.c
@@ -0,0 +1,76 @@
+/*
+ *  cx18 interrupt handling
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-irq.h"
+#include "cx18-mailbox.h"
+#include "cx18-scb.h"
+
+static void xpu_ack(struct cx18 *cx, u32 sw2)
+{
+	if (sw2 & IRQ_CPU_TO_EPU_ACK)
+		wake_up(&cx->mb_cpu_waitq);
+	if (sw2 & IRQ_APU_TO_EPU_ACK)
+		wake_up(&cx->mb_apu_waitq);
+}
+
+static void epu_cmd(struct cx18 *cx, u32 sw1)
+{
+	if (sw1 & IRQ_CPU_TO_EPU)
+		cx18_api_epu_cmd_irq(cx, CPU);
+	if (sw1 & IRQ_APU_TO_EPU)
+		cx18_api_epu_cmd_irq(cx, APU);
+}
+
+irqreturn_t cx18_irq_handler(int irq, void *dev_id)
+{
+	struct cx18 *cx = (struct cx18 *)dev_id;
+	u32 sw1, sw2, hw2;
+
+	sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & cx->sw1_irq_mask;
+	sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & cx->sw2_irq_mask;
+	hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & cx->hw2_irq_mask;
+
+	if (sw1)
+		cx18_write_reg_expect(cx, sw1, SW1_INT_STATUS, ~sw1, sw1);
+	if (sw2)
+		cx18_write_reg_expect(cx, sw2, SW2_INT_STATUS, ~sw2, sw2);
+	if (hw2)
+		cx18_write_reg_expect(cx, hw2, HW2_INT_CLR_STATUS, ~hw2, hw2);
+
+	if (sw1 || sw2 || hw2)
+		CX18_DEBUG_HI_IRQ("received interrupts SW1: %x	SW2: %x  HW2: %x\n",
+				  sw1, sw2, hw2);
+
+	/*
+	 * SW1 responses have to happen first.  The sending XPU times out the
+	 * incoming mailboxes on us rather rapidly.
+	 */
+	if (sw1)
+		epu_cmd(cx, sw1);
+
+	/* To do: interrupt-based I2C handling
+	if (hw2 & (HW2_I2C1_INT|HW2_I2C2_INT)) {
+	}
+	*/
+
+	if (sw2)
+		xpu_ack(cx, sw2);
+
+	return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE;
+}
diff --git a/drivers/media/pci/cx18/cx18-irq.h b/drivers/media/pci/cx18/cx18-irq.h
new file mode 100644
index 000000000..64496746e
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-irq.h
@@ -0,0 +1,30 @@
+/*
+ *  cx18 interrupt handling
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#define HW2_I2C1_INT			(1 << 22)
+#define HW2_I2C2_INT			(1 << 23)
+#define HW2_INT_CLR_STATUS		0xc730c4
+#define HW2_INT_MASK5_PCI		0xc730e4
+#define SW1_INT_SET                     0xc73100
+#define SW1_INT_STATUS                  0xc73104
+#define SW1_INT_ENABLE_PCI              0xc7311c
+#define SW2_INT_SET                     0xc73140
+#define SW2_INT_STATUS                  0xc73144
+#define SW2_INT_ENABLE_CPU              0xc73158
+#define SW2_INT_ENABLE_PCI              0xc7315c
+
+irqreturn_t cx18_irq_handler(int irq, void *dev_id);
diff --git a/drivers/media/pci/cx18/cx18-mailbox.c b/drivers/media/pci/cx18/cx18-mailbox.c
new file mode 100644
index 000000000..f66dd63e1
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-mailbox.c
@@ -0,0 +1,854 @@
+/*
+ *  cx18 mailbox functions
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <stdarg.h>
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-scb.h"
+#include "cx18-irq.h"
+#include "cx18-mailbox.h"
+#include "cx18-queue.h"
+#include "cx18-streams.h"
+#include "cx18-alsa-pcm.h" /* FIXME make configurable */
+
+static const char *rpu_str[] = { "APU", "CPU", "EPU", "HPU" };
+
+#define API_FAST (1 << 2) /* Short timeout */
+#define API_SLOW (1 << 3) /* Additional 300ms timeout */
+
+struct cx18_api_info {
+	u32 cmd;
+	u8 flags;		/* Flags, see above */
+	u8 rpu;			/* Processing unit */
+	const char *name;	/* The name of the command */
+};
+
+#define API_ENTRY(rpu, x, f) { (x), (f), (rpu), #x }
+
+static const struct cx18_api_info api_info[] = {
+	/* MPEG encoder API */
+	API_ENTRY(CPU, CX18_CPU_SET_CHANNEL_TYPE,		0),
+	API_ENTRY(CPU, CX18_EPU_DEBUG,				0),
+	API_ENTRY(CPU, CX18_CREATE_TASK,			0),
+	API_ENTRY(CPU, CX18_DESTROY_TASK,			0),
+	API_ENTRY(CPU, CX18_CPU_CAPTURE_START,                  API_SLOW),
+	API_ENTRY(CPU, CX18_CPU_CAPTURE_STOP,                   API_SLOW),
+	API_ENTRY(CPU, CX18_CPU_CAPTURE_PAUSE,                  0),
+	API_ENTRY(CPU, CX18_CPU_CAPTURE_RESUME,                 0),
+	API_ENTRY(CPU, CX18_CPU_SET_CHANNEL_TYPE,               0),
+	API_ENTRY(CPU, CX18_CPU_SET_STREAM_OUTPUT_TYPE,         0),
+	API_ENTRY(CPU, CX18_CPU_SET_VIDEO_IN,                   0),
+	API_ENTRY(CPU, CX18_CPU_SET_VIDEO_RATE,                 0),
+	API_ENTRY(CPU, CX18_CPU_SET_VIDEO_RESOLUTION,           0),
+	API_ENTRY(CPU, CX18_CPU_SET_FILTER_PARAM,               0),
+	API_ENTRY(CPU, CX18_CPU_SET_SPATIAL_FILTER_TYPE,        0),
+	API_ENTRY(CPU, CX18_CPU_SET_MEDIAN_CORING,              0),
+	API_ENTRY(CPU, CX18_CPU_SET_INDEXTABLE,                 0),
+	API_ENTRY(CPU, CX18_CPU_SET_AUDIO_PARAMETERS,           0),
+	API_ENTRY(CPU, CX18_CPU_SET_VIDEO_MUTE,                 0),
+	API_ENTRY(CPU, CX18_CPU_SET_AUDIO_MUTE,                 0),
+	API_ENTRY(CPU, CX18_CPU_SET_MISC_PARAMETERS,            0),
+	API_ENTRY(CPU, CX18_CPU_SET_RAW_VBI_PARAM,              API_SLOW),
+	API_ENTRY(CPU, CX18_CPU_SET_CAPTURE_LINE_NO,            0),
+	API_ENTRY(CPU, CX18_CPU_SET_COPYRIGHT,                  0),
+	API_ENTRY(CPU, CX18_CPU_SET_AUDIO_PID,                  0),
+	API_ENTRY(CPU, CX18_CPU_SET_VIDEO_PID,                  0),
+	API_ENTRY(CPU, CX18_CPU_SET_VER_CROP_LINE,              0),
+	API_ENTRY(CPU, CX18_CPU_SET_GOP_STRUCTURE,              0),
+	API_ENTRY(CPU, CX18_CPU_SET_SCENE_CHANGE_DETECTION,     0),
+	API_ENTRY(CPU, CX18_CPU_SET_ASPECT_RATIO,               0),
+	API_ENTRY(CPU, CX18_CPU_SET_SKIP_INPUT_FRAME,           0),
+	API_ENTRY(CPU, CX18_CPU_SET_SLICED_VBI_PARAM,           0),
+	API_ENTRY(CPU, CX18_CPU_SET_USERDATA_PLACE_HOLDER,      0),
+	API_ENTRY(CPU, CX18_CPU_GET_ENC_PTS,                    0),
+	API_ENTRY(CPU, CX18_CPU_SET_VFC_PARAM,                  0),
+	API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK,			0),
+	API_ENTRY(CPU, CX18_CPU_DE_SET_MDL,			API_FAST),
+	API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL,			API_SLOW),
+	API_ENTRY(APU, CX18_APU_START,				0),
+	API_ENTRY(APU, CX18_APU_STOP,				0),
+	API_ENTRY(APU, CX18_APU_RESETAI,			0),
+	API_ENTRY(CPU, CX18_CPU_DEBUG_PEEK32,			0),
+	API_ENTRY(0, 0,						0),
+};
+
+static const struct cx18_api_info *find_api_info(u32 cmd)
+{
+	int i;
+
+	for (i = 0; api_info[i].cmd; i++)
+		if (api_info[i].cmd == cmd)
+			return &api_info[i];
+	return NULL;
+}
+
+/* Call with buf of n*11+1 bytes */
+static char *u32arr2hex(u32 data[], int n, char *buf)
+{
+	char *p;
+	int i;
+
+	for (i = 0, p = buf; i < n; i++, p += 11) {
+		/* kernel snprintf() appends '\0' always */
+		snprintf(p, 12, " %#010x", data[i]);
+	}
+	*p = '\0';
+	return buf;
+}
+
+static void dump_mb(struct cx18 *cx, struct cx18_mailbox *mb, char *name)
+{
+	char argstr[MAX_MB_ARGUMENTS*11+1];
+
+	if (!(cx18_debug & CX18_DBGFLG_API))
+		return;
+
+	CX18_DEBUG_API("%s: req %#010x ack %#010x cmd %#010x err %#010x args%s\n",
+		       name, mb->request, mb->ack, mb->cmd, mb->error,
+		       u32arr2hex(mb->args, MAX_MB_ARGUMENTS, argstr));
+}
+
+
+/*
+ * Functions that run in a work_queue work handling context
+ */
+
+static void cx18_mdl_send_to_dvb(struct cx18_stream *s, struct cx18_mdl *mdl)
+{
+	struct cx18_buffer *buf;
+
+	if (s->dvb == NULL || !s->dvb->enabled || mdl->bytesused == 0)
+		return;
+
+	/* We ignore mdl and buf readpos accounting here - it doesn't matter */
+
+	/* The likely case */
+	if (list_is_singular(&mdl->buf_list)) {
+		buf = list_first_entry(&mdl->buf_list, struct cx18_buffer,
+				       list);
+		if (buf->bytesused)
+			dvb_dmx_swfilter(&s->dvb->demux,
+					 buf->buf, buf->bytesused);
+		return;
+	}
+
+	list_for_each_entry(buf, &mdl->buf_list, list) {
+		if (buf->bytesused == 0)
+			break;
+		dvb_dmx_swfilter(&s->dvb->demux, buf->buf, buf->bytesused);
+	}
+}
+
+static void cx18_mdl_send_to_videobuf(struct cx18_stream *s,
+	struct cx18_mdl *mdl)
+{
+	struct cx18_videobuf_buffer *vb_buf;
+	struct cx18_buffer *buf;
+	u8 *p;
+	u32 offset = 0;
+	int dispatch = 0;
+
+	if (mdl->bytesused == 0)
+		return;
+
+	/* Acquire a videobuf buffer, clone to and and release it */
+	spin_lock(&s->vb_lock);
+	if (list_empty(&s->vb_capture))
+		goto out;
+
+	vb_buf = list_first_entry(&s->vb_capture, struct cx18_videobuf_buffer,
+		vb.queue);
+
+	p = videobuf_to_vmalloc(&vb_buf->vb);
+	if (!p)
+		goto out;
+
+	offset = vb_buf->bytes_used;
+	list_for_each_entry(buf, &mdl->buf_list, list) {
+		if (buf->bytesused == 0)
+			break;
+
+		if ((offset + buf->bytesused) <= vb_buf->vb.bsize) {
+			memcpy(p + offset, buf->buf, buf->bytesused);
+			offset += buf->bytesused;
+			vb_buf->bytes_used += buf->bytesused;
+		}
+	}
+
+	/* If we've filled the buffer as per the callers res then dispatch it */
+	if (vb_buf->bytes_used >= s->vb_bytes_per_frame) {
+		dispatch = 1;
+		vb_buf->bytes_used = 0;
+	}
+
+	if (dispatch) {
+		v4l2_get_timestamp(&vb_buf->vb.ts);
+		list_del(&vb_buf->vb.queue);
+		vb_buf->vb.state = VIDEOBUF_DONE;
+		wake_up(&vb_buf->vb.done);
+	}
+
+	mod_timer(&s->vb_timeout, msecs_to_jiffies(2000) + jiffies);
+
+out:
+	spin_unlock(&s->vb_lock);
+}
+
+static void cx18_mdl_send_to_alsa(struct cx18 *cx, struct cx18_stream *s,
+				  struct cx18_mdl *mdl)
+{
+	struct cx18_buffer *buf;
+
+	if (mdl->bytesused == 0)
+		return;
+
+	/* We ignore mdl and buf readpos accounting here - it doesn't matter */
+
+	/* The likely case */
+	if (list_is_singular(&mdl->buf_list)) {
+		buf = list_first_entry(&mdl->buf_list, struct cx18_buffer,
+				       list);
+		if (buf->bytesused)
+			cx->pcm_announce_callback(cx->alsa, buf->buf,
+						  buf->bytesused);
+		return;
+	}
+
+	list_for_each_entry(buf, &mdl->buf_list, list) {
+		if (buf->bytesused == 0)
+			break;
+		cx->pcm_announce_callback(cx->alsa, buf->buf, buf->bytesused);
+	}
+}
+
+static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order)
+{
+	u32 handle, mdl_ack_count, id;
+	struct cx18_mailbox *mb;
+	struct cx18_mdl_ack *mdl_ack;
+	struct cx18_stream *s;
+	struct cx18_mdl *mdl;
+	int i;
+
+	mb = &order->mb;
+	handle = mb->args[0];
+	s = cx18_handle_to_stream(cx, handle);
+
+	if (s == NULL) {
+		CX18_WARN("Got DMA done notification for unknown/inactive handle %d, %s mailbox seq no %d\n",
+			  handle,
+			  (order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) ?
+			  "stale" : "good", mb->request);
+		return;
+	}
+
+	mdl_ack_count = mb->args[2];
+	mdl_ack = order->mdl_ack;
+	for (i = 0; i < mdl_ack_count; i++, mdl_ack++) {
+		id = mdl_ack->id;
+		/*
+		 * Simple integrity check for processing a stale (and possibly
+		 * inconsistent mailbox): make sure the MDL id is in the
+		 * valid range for the stream.
+		 *
+		 * We go through the trouble of dealing with stale mailboxes
+		 * because most of the time, the mailbox data is still valid and
+		 * unchanged (and in practice the firmware ping-pongs the
+		 * two mdl_ack buffers so mdl_acks are not stale).
+		 *
+		 * There are occasions when we get a half changed mailbox,
+		 * which this check catches for a handle & id mismatch.  If the
+		 * handle and id do correspond, the worst case is that we
+		 * completely lost the old MDL, but pick up the new MDL
+		 * early (but the new mdl_ack is guaranteed to be good in this
+		 * case as the firmware wouldn't point us to a new mdl_ack until
+		 * it's filled in).
+		 *
+		 * cx18_queue_get_mdl() will detect the lost MDLs
+		 * and send them back to q_free for fw rotation eventually.
+		 */
+		if ((order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) &&
+		    !(id >= s->mdl_base_idx &&
+		      id < (s->mdl_base_idx + s->buffers))) {
+			CX18_WARN("Fell behind! Ignoring stale mailbox with  inconsistent data. Lost MDL for mailbox seq no %d\n",
+				  mb->request);
+			break;
+		}
+		mdl = cx18_queue_get_mdl(s, id, mdl_ack->data_used);
+
+		CX18_DEBUG_HI_DMA("DMA DONE for %s (MDL %d)\n", s->name, id);
+		if (mdl == NULL) {
+			CX18_WARN("Could not find MDL %d for stream %s\n",
+				  id, s->name);
+			continue;
+		}
+
+		CX18_DEBUG_HI_DMA("%s recv bytesused = %d\n",
+				  s->name, mdl->bytesused);
+
+		if (s->type == CX18_ENC_STREAM_TYPE_TS) {
+			cx18_mdl_send_to_dvb(s, mdl);
+			cx18_enqueue(s, mdl, &s->q_free);
+		} else if (s->type == CX18_ENC_STREAM_TYPE_PCM) {
+			/* Pass the data to cx18-alsa */
+			if (cx->pcm_announce_callback != NULL) {
+				cx18_mdl_send_to_alsa(cx, s, mdl);
+				cx18_enqueue(s, mdl, &s->q_free);
+			} else {
+				cx18_enqueue(s, mdl, &s->q_full);
+			}
+		} else if (s->type == CX18_ENC_STREAM_TYPE_YUV) {
+			cx18_mdl_send_to_videobuf(s, mdl);
+			cx18_enqueue(s, mdl, &s->q_free);
+		} else {
+			cx18_enqueue(s, mdl, &s->q_full);
+			if (s->type == CX18_ENC_STREAM_TYPE_IDX)
+				cx18_stream_rotate_idx_mdls(cx);
+		}
+	}
+	/* Put as many MDLs as possible back into fw use */
+	cx18_stream_load_fw_queue(s);
+
+	wake_up(&cx->dma_waitq);
+	if (s->id != -1)
+		wake_up(&s->waitq);
+}
+
+static void epu_debug(struct cx18 *cx, struct cx18_in_work_order *order)
+{
+	char *p;
+	char *str = order->str;
+
+	CX18_DEBUG_INFO("%x %s\n", order->mb.args[0], str);
+	p = strchr(str, '.');
+	if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags) && p && p > str)
+		CX18_INFO("FW version: %s\n", p - 1);
+}
+
+static void epu_cmd(struct cx18 *cx, struct cx18_in_work_order *order)
+{
+	switch (order->rpu) {
+	case CPU:
+	{
+		switch (order->mb.cmd) {
+		case CX18_EPU_DMA_DONE:
+			epu_dma_done(cx, order);
+			break;
+		case CX18_EPU_DEBUG:
+			epu_debug(cx, order);
+			break;
+		default:
+			CX18_WARN("Unknown CPU to EPU mailbox command %#0x\n",
+				  order->mb.cmd);
+			break;
+		}
+		break;
+	}
+	case APU:
+		CX18_WARN("Unknown APU to EPU mailbox command %#0x\n",
+			  order->mb.cmd);
+		break;
+	default:
+		break;
+	}
+}
+
+static
+void free_in_work_order(struct cx18 *cx, struct cx18_in_work_order *order)
+{
+	atomic_set(&order->pending, 0);
+}
+
+void cx18_in_work_handler(struct work_struct *work)
+{
+	struct cx18_in_work_order *order =
+			container_of(work, struct cx18_in_work_order, work);
+	struct cx18 *cx = order->cx;
+	epu_cmd(cx, order);
+	free_in_work_order(cx, order);
+}
+
+
+/*
+ * Functions that run in an interrupt handling context
+ */
+
+static void mb_ack_irq(struct cx18 *cx, struct cx18_in_work_order *order)
+{
+	struct cx18_mailbox __iomem *ack_mb;
+	u32 ack_irq, req;
+
+	switch (order->rpu) {
+	case APU:
+		ack_irq = IRQ_EPU_TO_APU_ACK;
+		ack_mb = &cx->scb->apu2epu_mb;
+		break;
+	case CPU:
+		ack_irq = IRQ_EPU_TO_CPU_ACK;
+		ack_mb = &cx->scb->cpu2epu_mb;
+		break;
+	default:
+		CX18_WARN("Unhandled RPU (%d) for command %x ack\n",
+			  order->rpu, order->mb.cmd);
+		return;
+	}
+
+	req = order->mb.request;
+	/* Don't ack if the RPU has gotten impatient and timed us out */
+	if (req != cx18_readl(cx, &ack_mb->request) ||
+	    req == cx18_readl(cx, &ack_mb->ack)) {
+		CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our incoming %s to EPU mailbox (sequence no. %u) while processing\n",
+				rpu_str[order->rpu], rpu_str[order->rpu], req);
+		order->flags |= CX18_F_EWO_MB_STALE_WHILE_PROC;
+		return;
+	}
+	cx18_writel(cx, req, &ack_mb->ack);
+	cx18_write_reg_expect(cx, ack_irq, SW2_INT_SET, ack_irq, ack_irq);
+	return;
+}
+
+static int epu_dma_done_irq(struct cx18 *cx, struct cx18_in_work_order *order)
+{
+	u32 handle, mdl_ack_offset, mdl_ack_count;
+	struct cx18_mailbox *mb;
+	int i;
+
+	mb = &order->mb;
+	handle = mb->args[0];
+	mdl_ack_offset = mb->args[1];
+	mdl_ack_count = mb->args[2];
+
+	if (handle == CX18_INVALID_TASK_HANDLE ||
+	    mdl_ack_count == 0 || mdl_ack_count > CX18_MAX_MDL_ACKS) {
+		if ((order->flags & CX18_F_EWO_MB_STALE) == 0)
+			mb_ack_irq(cx, order);
+		return -1;
+	}
+
+	for (i = 0; i < sizeof(struct cx18_mdl_ack) * mdl_ack_count; i += sizeof(u32))
+		((u32 *)order->mdl_ack)[i / sizeof(u32)] =
+			cx18_readl(cx, cx->enc_mem + mdl_ack_offset + i);
+
+	if ((order->flags & CX18_F_EWO_MB_STALE) == 0)
+		mb_ack_irq(cx, order);
+	return 1;
+}
+
+static
+int epu_debug_irq(struct cx18 *cx, struct cx18_in_work_order *order)
+{
+	u32 str_offset;
+	char *str = order->str;
+
+	str[0] = '\0';
+	str_offset = order->mb.args[1];
+	if (str_offset) {
+		cx18_setup_page(cx, str_offset);
+		cx18_memcpy_fromio(cx, str, cx->enc_mem + str_offset, 252);
+		str[252] = '\0';
+		cx18_setup_page(cx, SCB_OFFSET);
+	}
+
+	if ((order->flags & CX18_F_EWO_MB_STALE) == 0)
+		mb_ack_irq(cx, order);
+
+	return str_offset ? 1 : 0;
+}
+
+static inline
+int epu_cmd_irq(struct cx18 *cx, struct cx18_in_work_order *order)
+{
+	int ret = -1;
+
+	switch (order->rpu) {
+	case CPU:
+	{
+		switch (order->mb.cmd) {
+		case CX18_EPU_DMA_DONE:
+			ret = epu_dma_done_irq(cx, order);
+			break;
+		case CX18_EPU_DEBUG:
+			ret = epu_debug_irq(cx, order);
+			break;
+		default:
+			CX18_WARN("Unknown CPU to EPU mailbox command %#0x\n",
+				  order->mb.cmd);
+			break;
+		}
+		break;
+	}
+	case APU:
+		CX18_WARN("Unknown APU to EPU mailbox command %#0x\n",
+			  order->mb.cmd);
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+static inline
+struct cx18_in_work_order *alloc_in_work_order_irq(struct cx18 *cx)
+{
+	int i;
+	struct cx18_in_work_order *order = NULL;
+
+	for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++) {
+		/*
+		 * We only need "pending" atomic to inspect its contents,
+		 * and need not do a check and set because:
+		 * 1. Any work handler thread only clears "pending" and only
+		 * on one, particular work order at a time, per handler thread.
+		 * 2. "pending" is only set here, and we're serialized because
+		 * we're called in an IRQ handler context.
+		 */
+		if (atomic_read(&cx->in_work_order[i].pending) == 0) {
+			order = &cx->in_work_order[i];
+			atomic_set(&order->pending, 1);
+			break;
+		}
+	}
+	return order;
+}
+
+void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu)
+{
+	struct cx18_mailbox __iomem *mb;
+	struct cx18_mailbox *order_mb;
+	struct cx18_in_work_order *order;
+	int submit;
+	int i;
+
+	switch (rpu) {
+	case CPU:
+		mb = &cx->scb->cpu2epu_mb;
+		break;
+	case APU:
+		mb = &cx->scb->apu2epu_mb;
+		break;
+	default:
+		return;
+	}
+
+	order = alloc_in_work_order_irq(cx);
+	if (order == NULL) {
+		CX18_WARN("Unable to find blank work order form to schedule incoming mailbox command processing\n");
+		return;
+	}
+
+	order->flags = 0;
+	order->rpu = rpu;
+	order_mb = &order->mb;
+
+	/* mb->cmd and mb->args[0] through mb->args[2] */
+	for (i = 0; i < 4; i++)
+		(&order_mb->cmd)[i] = cx18_readl(cx, &mb->cmd + i);
+
+	/* mb->request and mb->ack.  N.B. we want to read mb->ack last */
+	for (i = 0; i < 2; i++)
+		(&order_mb->request)[i] = cx18_readl(cx, &mb->request + i);
+
+	if (order_mb->request == order_mb->ack) {
+		CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our incoming %s to EPU mailbox (sequence no. %u)\n",
+				rpu_str[rpu], rpu_str[rpu], order_mb->request);
+		if (cx18_debug & CX18_DBGFLG_WARN)
+			dump_mb(cx, order_mb, "incoming");
+		order->flags = CX18_F_EWO_MB_STALE_UPON_RECEIPT;
+	}
+
+	/*
+	 * Individual EPU command processing is responsible for ack-ing
+	 * a non-stale mailbox as soon as possible
+	 */
+	submit = epu_cmd_irq(cx, order);
+	if (submit > 0) {
+		queue_work(cx->in_work_queue, &order->work);
+	}
+}
+
+
+/*
+ * Functions called from a non-interrupt, non work_queue context
+ */
+
+static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
+{
+	const struct cx18_api_info *info = find_api_info(cmd);
+	u32 irq, req, ack, err;
+	struct cx18_mailbox __iomem *mb;
+	wait_queue_head_t *waitq;
+	struct mutex *mb_lock;
+	unsigned long int t0, timeout, ret;
+	int i;
+	char argstr[MAX_MB_ARGUMENTS*11+1];
+	DEFINE_WAIT(w);
+
+	if (info == NULL) {
+		CX18_WARN("unknown cmd %x\n", cmd);
+		return -EINVAL;
+	}
+
+	if (cx18_debug & CX18_DBGFLG_API) { /* only call u32arr2hex if needed */
+		if (cmd == CX18_CPU_DE_SET_MDL) {
+			if (cx18_debug & CX18_DBGFLG_HIGHVOL)
+				CX18_DEBUG_HI_API("%s\tcmd %#010x args%s\n",
+						info->name, cmd,
+						u32arr2hex(data, args, argstr));
+		} else
+			CX18_DEBUG_API("%s\tcmd %#010x args%s\n",
+				       info->name, cmd,
+				       u32arr2hex(data, args, argstr));
+	}
+
+	switch (info->rpu) {
+	case APU:
+		waitq = &cx->mb_apu_waitq;
+		mb_lock = &cx->epu2apu_mb_lock;
+		irq = IRQ_EPU_TO_APU;
+		mb = &cx->scb->epu2apu_mb;
+		break;
+	case CPU:
+		waitq = &cx->mb_cpu_waitq;
+		mb_lock = &cx->epu2cpu_mb_lock;
+		irq = IRQ_EPU_TO_CPU;
+		mb = &cx->scb->epu2cpu_mb;
+		break;
+	default:
+		CX18_WARN("Unknown RPU (%d) for API call\n", info->rpu);
+		return -EINVAL;
+	}
+
+	mutex_lock(mb_lock);
+	/*
+	 * Wait for an in-use mailbox to complete
+	 *
+	 * If the XPU is responding with Ack's, the mailbox shouldn't be in
+	 * a busy state, since we serialize access to it on our end.
+	 *
+	 * If the wait for ack after sending a previous command was interrupted
+	 * by a signal, we may get here and find a busy mailbox.  After waiting,
+	 * mark it "not busy" from our end, if the XPU hasn't ack'ed it still.
+	 */
+	req = cx18_readl(cx, &mb->request);
+	timeout = msecs_to_jiffies(10);
+	ret = wait_event_timeout(*waitq,
+				 (ack = cx18_readl(cx, &mb->ack)) == req,
+				 timeout);
+	if (req != ack) {
+		/* waited long enough, make the mbox "not busy" from our end */
+		cx18_writel(cx, req, &mb->ack);
+		CX18_ERR("mbox was found stuck busy when setting up for %s; clearing busy and trying to proceed\n",
+			 info->name);
+	} else if (ret != timeout)
+		CX18_DEBUG_API("waited %u msecs for busy mbox to be acked\n",
+			       jiffies_to_msecs(timeout-ret));
+
+	/* Build the outgoing mailbox */
+	req = ((req & 0xfffffffe) == 0xfffffffe) ? 1 : req + 1;
+
+	cx18_writel(cx, cmd, &mb->cmd);
+	for (i = 0; i < args; i++)
+		cx18_writel(cx, data[i], &mb->args[i]);
+	cx18_writel(cx, 0, &mb->error);
+	cx18_writel(cx, req, &mb->request);
+	cx18_writel(cx, req - 1, &mb->ack); /* ensure ack & req are distinct */
+
+	/*
+	 * Notify the XPU and wait for it to send an Ack back
+	 */
+	timeout = msecs_to_jiffies((info->flags & API_FAST) ? 10 : 20);
+
+	CX18_DEBUG_HI_IRQ("sending interrupt SW1: %x to send %s\n",
+			  irq, info->name);
+
+	/* So we don't miss the wakeup, prepare to wait before notifying fw */
+	prepare_to_wait(waitq, &w, TASK_UNINTERRUPTIBLE);
+	cx18_write_reg_expect(cx, irq, SW1_INT_SET, irq, irq);
+
+	t0 = jiffies;
+	ack = cx18_readl(cx, &mb->ack);
+	if (ack != req) {
+		schedule_timeout(timeout);
+		ret = jiffies - t0;
+		ack = cx18_readl(cx, &mb->ack);
+	} else {
+		ret = jiffies - t0;
+	}
+
+	finish_wait(waitq, &w);
+
+	if (req != ack) {
+		mutex_unlock(mb_lock);
+		if (ret >= timeout) {
+			/* Timed out */
+			CX18_DEBUG_WARN("sending %s timed out waiting %d msecs for RPU acknowledgment\n",
+					info->name, jiffies_to_msecs(ret));
+		} else {
+			CX18_DEBUG_WARN("woken up before mailbox ack was ready after submitting %s to RPU.  only waited %d msecs on req %u but awakened with unmatched ack %u\n",
+					info->name,
+					jiffies_to_msecs(ret),
+					req, ack);
+		}
+		return -EINVAL;
+	}
+
+	if (ret >= timeout)
+		CX18_DEBUG_WARN("failed to be awakened upon RPU acknowledgment sending %s; timed out waiting %d msecs\n",
+				info->name, jiffies_to_msecs(ret));
+	else
+		CX18_DEBUG_HI_API("waited %u msecs for %s to be acked\n",
+				  jiffies_to_msecs(ret), info->name);
+
+	/* Collect data returned by the XPU */
+	for (i = 0; i < MAX_MB_ARGUMENTS; i++)
+		data[i] = cx18_readl(cx, &mb->args[i]);
+	err = cx18_readl(cx, &mb->error);
+	mutex_unlock(mb_lock);
+
+	/*
+	 * Wait for XPU to perform extra actions for the caller in some cases.
+	 * e.g. CX18_CPU_DE_RELEASE_MDL will cause the CPU to send all MDLs
+	 * back in a burst shortly thereafter
+	 */
+	if (info->flags & API_SLOW)
+		cx18_msleep_timeout(300, 0);
+
+	if (err)
+		CX18_DEBUG_API("mailbox error %08x for command %s\n", err,
+				info->name);
+	return err ? -EIO : 0;
+}
+
+int cx18_api(struct cx18 *cx, u32 cmd, int args, u32 data[])
+{
+	return cx18_api_call(cx, cmd, args, data);
+}
+
+static int cx18_set_filter_param(struct cx18_stream *s)
+{
+	struct cx18 *cx = s->cx;
+	u32 mode;
+	int ret;
+
+	mode = (cx->filter_mode & 1) ? 2 : (cx->spatial_strength ? 1 : 0);
+	ret = cx18_vapi(cx, CX18_CPU_SET_FILTER_PARAM, 4,
+			s->handle, 1, mode, cx->spatial_strength);
+	mode = (cx->filter_mode & 2) ? 2 : (cx->temporal_strength ? 1 : 0);
+	ret = ret ? ret : cx18_vapi(cx, CX18_CPU_SET_FILTER_PARAM, 4,
+			s->handle, 0, mode, cx->temporal_strength);
+	ret = ret ? ret : cx18_vapi(cx, CX18_CPU_SET_FILTER_PARAM, 4,
+			s->handle, 2, cx->filter_mode >> 2, 0);
+	return ret;
+}
+
+int cx18_api_func(void *priv, u32 cmd, int in, int out,
+		u32 data[CX2341X_MBOX_MAX_DATA])
+{
+	struct cx18_stream *s = priv;
+	struct cx18 *cx = s->cx;
+
+	switch (cmd) {
+	case CX2341X_ENC_SET_OUTPUT_PORT:
+		return 0;
+	case CX2341X_ENC_SET_FRAME_RATE:
+		return cx18_vapi(cx, CX18_CPU_SET_VIDEO_IN, 6,
+				s->handle, 0, 0, 0, 0, data[0]);
+	case CX2341X_ENC_SET_FRAME_SIZE:
+		return cx18_vapi(cx, CX18_CPU_SET_VIDEO_RESOLUTION, 3,
+				s->handle, data[1], data[0]);
+	case CX2341X_ENC_SET_STREAM_TYPE:
+		return cx18_vapi(cx, CX18_CPU_SET_STREAM_OUTPUT_TYPE, 2,
+				s->handle, data[0]);
+	case CX2341X_ENC_SET_ASPECT_RATIO:
+		return cx18_vapi(cx, CX18_CPU_SET_ASPECT_RATIO, 2,
+				s->handle, data[0]);
+
+	case CX2341X_ENC_SET_GOP_PROPERTIES:
+		return cx18_vapi(cx, CX18_CPU_SET_GOP_STRUCTURE, 3,
+				s->handle, data[0], data[1]);
+	case CX2341X_ENC_SET_GOP_CLOSURE:
+		return 0;
+	case CX2341X_ENC_SET_AUDIO_PROPERTIES:
+		return cx18_vapi(cx, CX18_CPU_SET_AUDIO_PARAMETERS, 2,
+				s->handle, data[0]);
+	case CX2341X_ENC_MUTE_AUDIO:
+		return cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2,
+				s->handle, data[0]);
+	case CX2341X_ENC_SET_BIT_RATE:
+		return cx18_vapi(cx, CX18_CPU_SET_VIDEO_RATE, 5,
+				s->handle, data[0], data[1], data[2], data[3]);
+	case CX2341X_ENC_MUTE_VIDEO:
+		return cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2,
+				s->handle, data[0]);
+	case CX2341X_ENC_SET_FRAME_DROP_RATE:
+		return cx18_vapi(cx, CX18_CPU_SET_SKIP_INPUT_FRAME, 2,
+				s->handle, data[0]);
+	case CX2341X_ENC_MISC:
+		return cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 4,
+				s->handle, data[0], data[1], data[2]);
+	case CX2341X_ENC_SET_DNR_FILTER_MODE:
+		cx->filter_mode = (data[0] & 3) | (data[1] << 2);
+		return cx18_set_filter_param(s);
+	case CX2341X_ENC_SET_DNR_FILTER_PROPS:
+		cx->spatial_strength = data[0];
+		cx->temporal_strength = data[1];
+		return cx18_set_filter_param(s);
+	case CX2341X_ENC_SET_SPATIAL_FILTER_TYPE:
+		return cx18_vapi(cx, CX18_CPU_SET_SPATIAL_FILTER_TYPE, 3,
+				s->handle, data[0], data[1]);
+	case CX2341X_ENC_SET_CORING_LEVELS:
+		return cx18_vapi(cx, CX18_CPU_SET_MEDIAN_CORING, 5,
+				s->handle, data[0], data[1], data[2], data[3]);
+	}
+	CX18_WARN("Unknown cmd %x\n", cmd);
+	return 0;
+}
+
+int cx18_vapi_result(struct cx18 *cx, u32 data[MAX_MB_ARGUMENTS],
+		u32 cmd, int args, ...)
+{
+	va_list ap;
+	int i;
+
+	va_start(ap, args);
+	for (i = 0; i < args; i++)
+		data[i] = va_arg(ap, u32);
+	va_end(ap);
+	return cx18_api(cx, cmd, args, data);
+}
+
+int cx18_vapi(struct cx18 *cx, u32 cmd, int args, ...)
+{
+	u32 data[MAX_MB_ARGUMENTS];
+	va_list ap;
+	int i;
+
+	if (cx == NULL) {
+		CX18_ERR("cx == NULL (cmd=%x)\n", cmd);
+		return 0;
+	}
+	if (args > MAX_MB_ARGUMENTS) {
+		CX18_ERR("args too big (cmd=%x)\n", cmd);
+		args = MAX_MB_ARGUMENTS;
+	}
+	va_start(ap, args);
+	for (i = 0; i < args; i++)
+		data[i] = va_arg(ap, u32);
+	va_end(ap);
+	return cx18_api(cx, cmd, args, data);
+}
diff --git a/drivers/media/pci/cx18/cx18-mailbox.h b/drivers/media/pci/cx18/cx18-mailbox.h
new file mode 100644
index 000000000..54b11322b
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-mailbox.h
@@ -0,0 +1,90 @@
+/*
+ *  cx18 mailbox functions
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _CX18_MAILBOX_H_
+#define _CX18_MAILBOX_H_
+
+/* mailbox max args */
+#define MAX_MB_ARGUMENTS 6
+/* compatibility, should be same as the define in cx2341x.h */
+#define CX2341X_MBOX_MAX_DATA 16
+
+#define MB_RESERVED_HANDLE_0 0
+#define MB_RESERVED_HANDLE_1 0xFFFFFFFF
+
+#define APU 0
+#define CPU 1
+#define EPU 2
+#define HPU 3
+
+struct cx18;
+
+/*
+ * This structure is used by CPU to provide completed MDL & buffers information.
+ * Its structure is dictated by the layout of the SCB, required by the
+ * firmware, but its definition needs to be here, instead of in cx18-scb.h,
+ * for mailbox work order scheduling
+ */
+struct cx18_mdl_ack {
+    u32 id;        /* ID of a completed MDL */
+    u32 data_used; /* Total data filled in the MDL with 'id' */
+};
+
+/* The cx18_mailbox struct is the mailbox structure which is used for passing
+   messages between processors */
+struct cx18_mailbox {
+    /* The sender sets a handle in 'request' after he fills the command. The
+       'request' should be different than 'ack'. The sender, also, generates
+       an interrupt on XPU2YPU_irq where XPU is the sender and YPU is the
+       receiver. */
+    u32       request;
+    /* The receiver detects a new command when 'req' is different than 'ack'.
+       He sets 'ack' to the same value as 'req' to clear the command. He, also,
+       generates an interrupt on YPU2XPU_irq where XPU is the sender and YPU
+       is the receiver. */
+    u32       ack;
+    u32       reserved[6];
+    /* 'cmd' identifies the command. The list of these commands are in
+       cx23418.h */
+    u32       cmd;
+    /* Each command can have up to 6 arguments */
+    u32       args[MAX_MB_ARGUMENTS];
+    /* The return code can be one of the codes in the file cx23418.h. If the
+       command is completed successfully, the error will be ERR_SYS_SUCCESS.
+       If it is pending, the code is ERR_SYS_PENDING. If it failed, the error
+       code would indicate the task from which the error originated and will
+       be one of the errors in cx23418.h. In that case, the following
+       applies ((error & 0xff) != 0).
+       If the command is pending, the return will be passed in a MB from the
+       receiver to the sender. 'req' will be returned in args[0] */
+    u32       error;
+};
+
+struct cx18_stream;
+
+int cx18_api(struct cx18 *cx, u32 cmd, int args, u32 data[]);
+int cx18_vapi_result(struct cx18 *cx, u32 data[MAX_MB_ARGUMENTS], u32 cmd,
+		int args, ...);
+int cx18_vapi(struct cx18 *cx, u32 cmd, int args, ...);
+int cx18_api_func(void *priv, u32 cmd, int in, int out,
+		u32 data[CX2341X_MBOX_MAX_DATA]);
+
+void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu);
+
+void cx18_in_work_handler(struct work_struct *work);
+
+#endif
diff --git a/drivers/media/pci/cx18/cx18-queue.c b/drivers/media/pci/cx18/cx18-queue.c
new file mode 100644
index 000000000..d212f79fd
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-queue.c
@@ -0,0 +1,436 @@
+/*
+ *  cx18 buffer queues
+ *
+ *  Derived from ivtv-queue.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-queue.h"
+#include "cx18-streams.h"
+#include "cx18-scb.h"
+#include "cx18-io.h"
+
+void cx18_buf_swap(struct cx18_buffer *buf)
+{
+	int i;
+
+	for (i = 0; i < buf->bytesused; i += 4)
+		swab32s((u32 *)(buf->buf + i));
+}
+
+void _cx18_mdl_swap(struct cx18_mdl *mdl)
+{
+	struct cx18_buffer *buf;
+
+	list_for_each_entry(buf, &mdl->buf_list, list) {
+		if (buf->bytesused == 0)
+			break;
+		cx18_buf_swap(buf);
+	}
+}
+
+void cx18_queue_init(struct cx18_queue *q)
+{
+	INIT_LIST_HEAD(&q->list);
+	atomic_set(&q->depth, 0);
+	q->bytesused = 0;
+}
+
+struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_mdl *mdl,
+				 struct cx18_queue *q, int to_front)
+{
+	/* clear the mdl if it is not to be enqueued to the full queue */
+	if (q != &s->q_full) {
+		mdl->bytesused = 0;
+		mdl->readpos = 0;
+		mdl->m_flags = 0;
+		mdl->skipped = 0;
+		mdl->curr_buf = NULL;
+	}
+
+	/* q_busy is restricted to a max buffer count imposed by firmware */
+	if (q == &s->q_busy &&
+	    atomic_read(&q->depth) >= CX18_MAX_FW_MDLS_PER_STREAM)
+		q = &s->q_free;
+
+	spin_lock(&q->lock);
+
+	if (to_front)
+		list_add(&mdl->list, &q->list); /* LIFO */
+	else
+		list_add_tail(&mdl->list, &q->list); /* FIFO */
+	q->bytesused += mdl->bytesused - mdl->readpos;
+	atomic_inc(&q->depth);
+
+	spin_unlock(&q->lock);
+	return q;
+}
+
+struct cx18_mdl *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q)
+{
+	struct cx18_mdl *mdl = NULL;
+
+	spin_lock(&q->lock);
+	if (!list_empty(&q->list)) {
+		mdl = list_first_entry(&q->list, struct cx18_mdl, list);
+		list_del_init(&mdl->list);
+		q->bytesused -= mdl->bytesused - mdl->readpos;
+		mdl->skipped = 0;
+		atomic_dec(&q->depth);
+	}
+	spin_unlock(&q->lock);
+	return mdl;
+}
+
+static void _cx18_mdl_update_bufs_for_cpu(struct cx18_stream *s,
+					  struct cx18_mdl *mdl)
+{
+	struct cx18_buffer *buf;
+	u32 buf_size = s->buf_size;
+	u32 bytesused = mdl->bytesused;
+
+	list_for_each_entry(buf, &mdl->buf_list, list) {
+		buf->readpos = 0;
+		if (bytesused >= buf_size) {
+			buf->bytesused = buf_size;
+			bytesused -= buf_size;
+		} else {
+			buf->bytesused = bytesused;
+			bytesused = 0;
+		}
+		cx18_buf_sync_for_cpu(s, buf);
+	}
+}
+
+static inline void cx18_mdl_update_bufs_for_cpu(struct cx18_stream *s,
+						struct cx18_mdl *mdl)
+{
+	struct cx18_buffer *buf;
+
+	if (list_is_singular(&mdl->buf_list)) {
+		buf = list_first_entry(&mdl->buf_list, struct cx18_buffer,
+				       list);
+		buf->bytesused = mdl->bytesused;
+		buf->readpos = 0;
+		cx18_buf_sync_for_cpu(s, buf);
+	} else {
+		_cx18_mdl_update_bufs_for_cpu(s, mdl);
+	}
+}
+
+struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id,
+	u32 bytesused)
+{
+	struct cx18 *cx = s->cx;
+	struct cx18_mdl *mdl;
+	struct cx18_mdl *tmp;
+	struct cx18_mdl *ret = NULL;
+	LIST_HEAD(sweep_up);
+
+	/*
+	 * We don't have to acquire multiple q locks here, because we are
+	 * serialized by the single threaded work handler.
+	 * MDLs from the firmware will thus remain in order as
+	 * they are moved from q_busy to q_full or to the dvb ring buffer.
+	 */
+	spin_lock(&s->q_busy.lock);
+	list_for_each_entry_safe(mdl, tmp, &s->q_busy.list, list) {
+		/*
+		 * We should find what the firmware told us is done,
+		 * right at the front of the queue.  If we don't, we likely have
+		 * missed an mdl done message from the firmware.
+		 * Once we skip an mdl repeatedly, relative to the size of
+		 * q_busy, we have high confidence we've missed it.
+		 */
+		if (mdl->id != id) {
+			mdl->skipped++;
+			if (mdl->skipped >= atomic_read(&s->q_busy.depth)-1) {
+				/* mdl must have fallen out of rotation */
+				CX18_WARN("Skipped %s, MDL %d, %d times - it must have dropped out of rotation\n",
+					  s->name, mdl->id,
+					  mdl->skipped);
+				/* Sweep it up to put it back into rotation */
+				list_move_tail(&mdl->list, &sweep_up);
+				atomic_dec(&s->q_busy.depth);
+			}
+			continue;
+		}
+		/*
+		 * We pull the desired mdl off of the queue here.  Something
+		 * will have to put it back on a queue later.
+		 */
+		list_del_init(&mdl->list);
+		atomic_dec(&s->q_busy.depth);
+		ret = mdl;
+		break;
+	}
+	spin_unlock(&s->q_busy.lock);
+
+	/*
+	 * We found the mdl for which we were looking.  Get it ready for
+	 * the caller to put on q_full or in the dvb ring buffer.
+	 */
+	if (ret != NULL) {
+		ret->bytesused = bytesused;
+		ret->skipped = 0;
+		/* 0'ed readpos, m_flags & curr_buf when mdl went on q_busy */
+		cx18_mdl_update_bufs_for_cpu(s, ret);
+		if (s->type != CX18_ENC_STREAM_TYPE_TS)
+			set_bit(CX18_F_M_NEED_SWAP, &ret->m_flags);
+	}
+
+	/* Put any mdls the firmware is ignoring back into normal rotation */
+	list_for_each_entry_safe(mdl, tmp, &sweep_up, list) {
+		list_del_init(&mdl->list);
+		cx18_enqueue(s, mdl, &s->q_free);
+	}
+	return ret;
+}
+
+/* Move all mdls of a queue, while flushing the mdl */
+static void cx18_queue_flush(struct cx18_stream *s,
+			     struct cx18_queue *q_src, struct cx18_queue *q_dst)
+{
+	struct cx18_mdl *mdl;
+
+	/* It only makes sense to flush to q_free or q_idle */
+	if (q_src == q_dst || q_dst == &s->q_full || q_dst == &s->q_busy)
+		return;
+
+	spin_lock(&q_src->lock);
+	spin_lock(&q_dst->lock);
+	while (!list_empty(&q_src->list)) {
+		mdl = list_first_entry(&q_src->list, struct cx18_mdl, list);
+		list_move_tail(&mdl->list, &q_dst->list);
+		mdl->bytesused = 0;
+		mdl->readpos = 0;
+		mdl->m_flags = 0;
+		mdl->skipped = 0;
+		mdl->curr_buf = NULL;
+		atomic_inc(&q_dst->depth);
+	}
+	cx18_queue_init(q_src);
+	spin_unlock(&q_src->lock);
+	spin_unlock(&q_dst->lock);
+}
+
+void cx18_flush_queues(struct cx18_stream *s)
+{
+	cx18_queue_flush(s, &s->q_busy, &s->q_free);
+	cx18_queue_flush(s, &s->q_full, &s->q_free);
+}
+
+/*
+ * Note, s->buf_pool is not protected by a lock,
+ * the stream better not have *anything* going on when calling this
+ */
+void cx18_unload_queues(struct cx18_stream *s)
+{
+	struct cx18_queue *q_idle = &s->q_idle;
+	struct cx18_mdl *mdl;
+	struct cx18_buffer *buf;
+
+	/* Move all MDLS to q_idle */
+	cx18_queue_flush(s, &s->q_busy, q_idle);
+	cx18_queue_flush(s, &s->q_full, q_idle);
+	cx18_queue_flush(s, &s->q_free, q_idle);
+
+	/* Reset MDL id's and move all buffers back to the stream's buf_pool */
+	spin_lock(&q_idle->lock);
+	list_for_each_entry(mdl, &q_idle->list, list) {
+		while (!list_empty(&mdl->buf_list)) {
+			buf = list_first_entry(&mdl->buf_list,
+					       struct cx18_buffer, list);
+			list_move_tail(&buf->list, &s->buf_pool);
+			buf->bytesused = 0;
+			buf->readpos = 0;
+		}
+		mdl->id = s->mdl_base_idx; /* reset id to a "safe" value */
+		/* all other mdl fields were cleared by cx18_queue_flush() */
+	}
+	spin_unlock(&q_idle->lock);
+}
+
+/*
+ * Note, s->buf_pool is not protected by a lock,
+ * the stream better not have *anything* going on when calling this
+ */
+void cx18_load_queues(struct cx18_stream *s)
+{
+	struct cx18 *cx = s->cx;
+	struct cx18_mdl *mdl;
+	struct cx18_buffer *buf;
+	int mdl_id;
+	int i;
+	u32 partial_buf_size;
+
+	/*
+	 * Attach buffers to MDLs, give the MDLs ids, and add MDLs to q_free
+	 * Excess MDLs are left on q_idle
+	 * Excess buffers are left in buf_pool and/or on an MDL in q_idle
+	 */
+	mdl_id = s->mdl_base_idx;
+	for (mdl = cx18_dequeue(s, &s->q_idle), i = s->bufs_per_mdl;
+	     mdl != NULL && i == s->bufs_per_mdl;
+	     mdl = cx18_dequeue(s, &s->q_idle)) {
+
+		mdl->id = mdl_id;
+
+		for (i = 0; i < s->bufs_per_mdl; i++) {
+			if (list_empty(&s->buf_pool))
+				break;
+
+			buf = list_first_entry(&s->buf_pool, struct cx18_buffer,
+					       list);
+			list_move_tail(&buf->list, &mdl->buf_list);
+
+			/* update the firmware's MDL array with this buffer */
+			cx18_writel(cx, buf->dma_handle,
+				    &cx->scb->cpu_mdl[mdl_id + i].paddr);
+			cx18_writel(cx, s->buf_size,
+				    &cx->scb->cpu_mdl[mdl_id + i].length);
+		}
+
+		if (i == s->bufs_per_mdl) {
+			/*
+			 * The encoder doesn't honor s->mdl_size.  So in the
+			 * case of a non-integral number of buffers to meet
+			 * mdl_size, we lie about the size of the last buffer
+			 * in the MDL to get the encoder to really only send
+			 * us mdl_size bytes per MDL transfer.
+			 */
+			partial_buf_size = s->mdl_size % s->buf_size;
+			if (partial_buf_size) {
+				cx18_writel(cx, partial_buf_size,
+				      &cx->scb->cpu_mdl[mdl_id + i - 1].length);
+			}
+			cx18_enqueue(s, mdl, &s->q_free);
+		} else {
+			/* Not enough buffers for this MDL; we won't use it */
+			cx18_push(s, mdl, &s->q_idle);
+		}
+		mdl_id += i;
+	}
+}
+
+void _cx18_mdl_sync_for_device(struct cx18_stream *s, struct cx18_mdl *mdl)
+{
+	int dma = s->dma;
+	u32 buf_size = s->buf_size;
+	struct pci_dev *pci_dev = s->cx->pci_dev;
+	struct cx18_buffer *buf;
+
+	list_for_each_entry(buf, &mdl->buf_list, list)
+		pci_dma_sync_single_for_device(pci_dev, buf->dma_handle,
+					       buf_size, dma);
+}
+
+int cx18_stream_alloc(struct cx18_stream *s)
+{
+	struct cx18 *cx = s->cx;
+	int i;
+
+	if (s->buffers == 0)
+		return 0;
+
+	CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers (%d.%02d kB total)\n",
+		s->name, s->buffers, s->buf_size,
+		s->buffers * s->buf_size / 1024,
+		(s->buffers * s->buf_size * 100 / 1024) % 100);
+
+	if (((char __iomem *)&cx->scb->cpu_mdl[cx->free_mdl_idx + s->buffers] -
+				(char __iomem *)cx->scb) > SCB_RESERVED_SIZE) {
+		unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE -
+					((char __iomem *)cx->scb->cpu_mdl));
+
+		CX18_ERR("Too many buffers, cannot fit in SCB area\n");
+		CX18_ERR("Max buffers = %zu\n",
+			bufsz / sizeof(struct cx18_mdl_ent));
+		return -ENOMEM;
+	}
+
+	s->mdl_base_idx = cx->free_mdl_idx;
+
+	/* allocate stream buffers and MDLs */
+	for (i = 0; i < s->buffers; i++) {
+		struct cx18_mdl *mdl;
+		struct cx18_buffer *buf;
+
+		/* 1 MDL per buffer to handle the worst & also default case */
+		mdl = kzalloc(sizeof(struct cx18_mdl), GFP_KERNEL|__GFP_NOWARN);
+		if (mdl == NULL)
+			break;
+
+		buf = kzalloc(sizeof(struct cx18_buffer),
+				GFP_KERNEL|__GFP_NOWARN);
+		if (buf == NULL) {
+			kfree(mdl);
+			break;
+		}
+
+		buf->buf = kmalloc(s->buf_size, GFP_KERNEL|__GFP_NOWARN);
+		if (buf->buf == NULL) {
+			kfree(mdl);
+			kfree(buf);
+			break;
+		}
+
+		INIT_LIST_HEAD(&mdl->list);
+		INIT_LIST_HEAD(&mdl->buf_list);
+		mdl->id = s->mdl_base_idx; /* a somewhat safe value */
+		cx18_enqueue(s, mdl, &s->q_idle);
+
+		INIT_LIST_HEAD(&buf->list);
+		buf->dma_handle = pci_map_single(s->cx->pci_dev,
+				buf->buf, s->buf_size, s->dma);
+		cx18_buf_sync_for_cpu(s, buf);
+		list_add_tail(&buf->list, &s->buf_pool);
+	}
+	if (i == s->buffers) {
+		cx->free_mdl_idx += s->buffers;
+		return 0;
+	}
+	CX18_ERR("Couldn't allocate buffers for %s stream\n", s->name);
+	cx18_stream_free(s);
+	return -ENOMEM;
+}
+
+void cx18_stream_free(struct cx18_stream *s)
+{
+	struct cx18_mdl *mdl;
+	struct cx18_buffer *buf;
+	struct cx18 *cx = s->cx;
+
+	CX18_DEBUG_INFO("Deallocating buffers for %s stream\n", s->name);
+
+	/* move all buffers to buf_pool and all MDLs to q_idle */
+	cx18_unload_queues(s);
+
+	/* empty q_idle */
+	while ((mdl = cx18_dequeue(s, &s->q_idle)))
+		kfree(mdl);
+
+	/* empty buf_pool */
+	while (!list_empty(&s->buf_pool)) {
+		buf = list_first_entry(&s->buf_pool, struct cx18_buffer, list);
+		list_del_init(&buf->list);
+
+		pci_unmap_single(s->cx->pci_dev, buf->dma_handle,
+				s->buf_size, s->dma);
+		kfree(buf->buf);
+		kfree(buf);
+	}
+}
diff --git a/drivers/media/pci/cx18/cx18-queue.h b/drivers/media/pci/cx18/cx18-queue.h
new file mode 100644
index 000000000..093b04e01
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-queue.h
@@ -0,0 +1,93 @@
+/*
+ *  cx18 buffer queues
+ *
+ *  Derived from ivtv-queue.h
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#define CX18_DMA_UNMAPPED	((u32) -1)
+
+/* cx18_buffer utility functions */
+
+static inline void cx18_buf_sync_for_cpu(struct cx18_stream *s,
+	struct cx18_buffer *buf)
+{
+	pci_dma_sync_single_for_cpu(s->cx->pci_dev, buf->dma_handle,
+				s->buf_size, s->dma);
+}
+
+static inline void cx18_buf_sync_for_device(struct cx18_stream *s,
+	struct cx18_buffer *buf)
+{
+	pci_dma_sync_single_for_device(s->cx->pci_dev, buf->dma_handle,
+				s->buf_size, s->dma);
+}
+
+void _cx18_mdl_sync_for_device(struct cx18_stream *s, struct cx18_mdl *mdl);
+
+static inline void cx18_mdl_sync_for_device(struct cx18_stream *s,
+					    struct cx18_mdl *mdl)
+{
+	if (list_is_singular(&mdl->buf_list))
+		cx18_buf_sync_for_device(s, list_first_entry(&mdl->buf_list,
+							     struct cx18_buffer,
+							     list));
+	else
+		_cx18_mdl_sync_for_device(s, mdl);
+}
+
+void cx18_buf_swap(struct cx18_buffer *buf);
+void _cx18_mdl_swap(struct cx18_mdl *mdl);
+
+static inline void cx18_mdl_swap(struct cx18_mdl *mdl)
+{
+	if (list_is_singular(&mdl->buf_list))
+		cx18_buf_swap(list_first_entry(&mdl->buf_list,
+					       struct cx18_buffer, list));
+	else
+		_cx18_mdl_swap(mdl);
+}
+
+/* cx18_queue utility functions */
+struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_mdl *mdl,
+				 struct cx18_queue *q, int to_front);
+
+static inline
+struct cx18_queue *cx18_enqueue(struct cx18_stream *s, struct cx18_mdl *mdl,
+				struct cx18_queue *q)
+{
+	return _cx18_enqueue(s, mdl, q, 0); /* FIFO */
+}
+
+static inline
+struct cx18_queue *cx18_push(struct cx18_stream *s, struct cx18_mdl *mdl,
+			     struct cx18_queue *q)
+{
+	return _cx18_enqueue(s, mdl, q, 1); /* LIFO */
+}
+
+void cx18_queue_init(struct cx18_queue *q);
+struct cx18_mdl *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q);
+struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id,
+	u32 bytesused);
+void cx18_flush_queues(struct cx18_stream *s);
+
+/* queue MDL reconfiguration helpers */
+void cx18_unload_queues(struct cx18_stream *s);
+void cx18_load_queues(struct cx18_stream *s);
+
+/* cx18_stream utility functions */
+int cx18_stream_alloc(struct cx18_stream *s);
+void cx18_stream_free(struct cx18_stream *s);
diff --git a/drivers/media/pci/cx18/cx18-scb.c b/drivers/media/pci/cx18/cx18-scb.c
new file mode 100644
index 000000000..83a926295
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-scb.c
@@ -0,0 +1,117 @@
+/*
+ *  cx18 System Control Block initialization
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-scb.h"
+
+void cx18_init_scb(struct cx18 *cx)
+{
+	cx18_setup_page(cx, SCB_OFFSET);
+	cx18_memset_io(cx, cx->scb, 0, 0x10000);
+
+	cx18_writel(cx, IRQ_APU_TO_CPU,     &cx->scb->apu2cpu_irq);
+	cx18_writel(cx, IRQ_CPU_TO_APU_ACK, &cx->scb->cpu2apu_irq_ack);
+	cx18_writel(cx, IRQ_HPU_TO_CPU,     &cx->scb->hpu2cpu_irq);
+	cx18_writel(cx, IRQ_CPU_TO_HPU_ACK, &cx->scb->cpu2hpu_irq_ack);
+	cx18_writel(cx, IRQ_PPU_TO_CPU,     &cx->scb->ppu2cpu_irq);
+	cx18_writel(cx, IRQ_CPU_TO_PPU_ACK, &cx->scb->cpu2ppu_irq_ack);
+	cx18_writel(cx, IRQ_EPU_TO_CPU,     &cx->scb->epu2cpu_irq);
+	cx18_writel(cx, IRQ_CPU_TO_EPU_ACK, &cx->scb->cpu2epu_irq_ack);
+
+	cx18_writel(cx, IRQ_CPU_TO_APU,     &cx->scb->cpu2apu_irq);
+	cx18_writel(cx, IRQ_APU_TO_CPU_ACK, &cx->scb->apu2cpu_irq_ack);
+	cx18_writel(cx, IRQ_HPU_TO_APU,     &cx->scb->hpu2apu_irq);
+	cx18_writel(cx, IRQ_APU_TO_HPU_ACK, &cx->scb->apu2hpu_irq_ack);
+	cx18_writel(cx, IRQ_PPU_TO_APU,     &cx->scb->ppu2apu_irq);
+	cx18_writel(cx, IRQ_APU_TO_PPU_ACK, &cx->scb->apu2ppu_irq_ack);
+	cx18_writel(cx, IRQ_EPU_TO_APU,     &cx->scb->epu2apu_irq);
+	cx18_writel(cx, IRQ_APU_TO_EPU_ACK, &cx->scb->apu2epu_irq_ack);
+
+	cx18_writel(cx, IRQ_CPU_TO_HPU,     &cx->scb->cpu2hpu_irq);
+	cx18_writel(cx, IRQ_HPU_TO_CPU_ACK, &cx->scb->hpu2cpu_irq_ack);
+	cx18_writel(cx, IRQ_APU_TO_HPU,     &cx->scb->apu2hpu_irq);
+	cx18_writel(cx, IRQ_HPU_TO_APU_ACK, &cx->scb->hpu2apu_irq_ack);
+	cx18_writel(cx, IRQ_PPU_TO_HPU,     &cx->scb->ppu2hpu_irq);
+	cx18_writel(cx, IRQ_HPU_TO_PPU_ACK, &cx->scb->hpu2ppu_irq_ack);
+	cx18_writel(cx, IRQ_EPU_TO_HPU,     &cx->scb->epu2hpu_irq);
+	cx18_writel(cx, IRQ_HPU_TO_EPU_ACK, &cx->scb->hpu2epu_irq_ack);
+
+	cx18_writel(cx, IRQ_CPU_TO_PPU,     &cx->scb->cpu2ppu_irq);
+	cx18_writel(cx, IRQ_PPU_TO_CPU_ACK, &cx->scb->ppu2cpu_irq_ack);
+	cx18_writel(cx, IRQ_APU_TO_PPU,     &cx->scb->apu2ppu_irq);
+	cx18_writel(cx, IRQ_PPU_TO_APU_ACK, &cx->scb->ppu2apu_irq_ack);
+	cx18_writel(cx, IRQ_HPU_TO_PPU,     &cx->scb->hpu2ppu_irq);
+	cx18_writel(cx, IRQ_PPU_TO_HPU_ACK, &cx->scb->ppu2hpu_irq_ack);
+	cx18_writel(cx, IRQ_EPU_TO_PPU,     &cx->scb->epu2ppu_irq);
+	cx18_writel(cx, IRQ_PPU_TO_EPU_ACK, &cx->scb->ppu2epu_irq_ack);
+
+	cx18_writel(cx, IRQ_CPU_TO_EPU,     &cx->scb->cpu2epu_irq);
+	cx18_writel(cx, IRQ_EPU_TO_CPU_ACK, &cx->scb->epu2cpu_irq_ack);
+	cx18_writel(cx, IRQ_APU_TO_EPU,     &cx->scb->apu2epu_irq);
+	cx18_writel(cx, IRQ_EPU_TO_APU_ACK, &cx->scb->epu2apu_irq_ack);
+	cx18_writel(cx, IRQ_HPU_TO_EPU,     &cx->scb->hpu2epu_irq);
+	cx18_writel(cx, IRQ_EPU_TO_HPU_ACK, &cx->scb->epu2hpu_irq_ack);
+	cx18_writel(cx, IRQ_PPU_TO_EPU,     &cx->scb->ppu2epu_irq);
+	cx18_writel(cx, IRQ_EPU_TO_PPU_ACK, &cx->scb->epu2ppu_irq_ack);
+
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2cpu_mb),
+			&cx->scb->apu2cpu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2cpu_mb),
+			&cx->scb->hpu2cpu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2cpu_mb),
+			&cx->scb->ppu2cpu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2cpu_mb),
+			&cx->scb->epu2cpu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2apu_mb),
+			&cx->scb->cpu2apu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2apu_mb),
+			&cx->scb->hpu2apu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2apu_mb),
+			&cx->scb->ppu2apu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2apu_mb),
+			&cx->scb->epu2apu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2hpu_mb),
+			&cx->scb->cpu2hpu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2hpu_mb),
+			&cx->scb->apu2hpu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2hpu_mb),
+			&cx->scb->ppu2hpu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2hpu_mb),
+			&cx->scb->epu2hpu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2ppu_mb),
+			&cx->scb->cpu2ppu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2ppu_mb),
+			&cx->scb->apu2ppu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2ppu_mb),
+			&cx->scb->hpu2ppu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2ppu_mb),
+			&cx->scb->epu2ppu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2epu_mb),
+			&cx->scb->cpu2epu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2epu_mb),
+			&cx->scb->apu2epu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2epu_mb),
+			&cx->scb->hpu2epu_mb_offset);
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2epu_mb),
+			&cx->scb->ppu2epu_mb_offset);
+
+	cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu_state),
+			&cx->scb->ipc_offset);
+
+	cx18_writel(cx, 1, &cx->scb->epu_state);
+}
diff --git a/drivers/media/pci/cx18/cx18-scb.h b/drivers/media/pci/cx18/cx18-scb.h
new file mode 100644
index 000000000..7c3eaea30
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-scb.h
@@ -0,0 +1,275 @@
+/*
+ *  cx18 System Control Block initialization
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef CX18_SCB_H
+#define CX18_SCB_H
+
+#include "cx18-mailbox.h"
+
+/* NOTE: All ACK interrupts are in the SW2 register.  All non-ACK interrupts
+   are in the SW1 register. */
+
+#define IRQ_APU_TO_CPU         0x00000001
+#define IRQ_CPU_TO_APU_ACK     0x00000001
+#define IRQ_HPU_TO_CPU         0x00000002
+#define IRQ_CPU_TO_HPU_ACK     0x00000002
+#define IRQ_PPU_TO_CPU         0x00000004
+#define IRQ_CPU_TO_PPU_ACK     0x00000004
+#define IRQ_EPU_TO_CPU         0x00000008
+#define IRQ_CPU_TO_EPU_ACK     0x00000008
+
+#define IRQ_CPU_TO_APU         0x00000010
+#define IRQ_APU_TO_CPU_ACK     0x00000010
+#define IRQ_HPU_TO_APU         0x00000020
+#define IRQ_APU_TO_HPU_ACK     0x00000020
+#define IRQ_PPU_TO_APU         0x00000040
+#define IRQ_APU_TO_PPU_ACK     0x00000040
+#define IRQ_EPU_TO_APU         0x00000080
+#define IRQ_APU_TO_EPU_ACK     0x00000080
+
+#define IRQ_CPU_TO_HPU         0x00000100
+#define IRQ_HPU_TO_CPU_ACK     0x00000100
+#define IRQ_APU_TO_HPU         0x00000200
+#define IRQ_HPU_TO_APU_ACK     0x00000200
+#define IRQ_PPU_TO_HPU         0x00000400
+#define IRQ_HPU_TO_PPU_ACK     0x00000400
+#define IRQ_EPU_TO_HPU         0x00000800
+#define IRQ_HPU_TO_EPU_ACK     0x00000800
+
+#define IRQ_CPU_TO_PPU         0x00001000
+#define IRQ_PPU_TO_CPU_ACK     0x00001000
+#define IRQ_APU_TO_PPU         0x00002000
+#define IRQ_PPU_TO_APU_ACK     0x00002000
+#define IRQ_HPU_TO_PPU         0x00004000
+#define IRQ_PPU_TO_HPU_ACK     0x00004000
+#define IRQ_EPU_TO_PPU         0x00008000
+#define IRQ_PPU_TO_EPU_ACK     0x00008000
+
+#define IRQ_CPU_TO_EPU         0x00010000
+#define IRQ_EPU_TO_CPU_ACK     0x00010000
+#define IRQ_APU_TO_EPU         0x00020000
+#define IRQ_EPU_TO_APU_ACK     0x00020000
+#define IRQ_HPU_TO_EPU         0x00040000
+#define IRQ_EPU_TO_HPU_ACK     0x00040000
+#define IRQ_PPU_TO_EPU         0x00080000
+#define IRQ_EPU_TO_PPU_ACK     0x00080000
+
+#define SCB_OFFSET  0xDC0000
+
+/* If Firmware uses fixed memory map, it shall not allocate the area
+   between SCB_OFFSET and SCB_OFFSET+SCB_RESERVED_SIZE-1 inclusive */
+#define SCB_RESERVED_SIZE 0x10000
+
+
+/* This structure is used by EPU to provide memory descriptors in its memory */
+struct cx18_mdl_ent {
+    u32 paddr;  /* Physical address of a buffer segment */
+    u32 length; /* Length of the buffer segment */
+};
+
+struct cx18_scb {
+	/* These fields form the System Control Block which is used at boot time
+	   for localizing the IPC data as well as the code positions for all
+	   processors. The offsets are from the start of this struct. */
+
+	/* Offset where to find the Inter-Processor Communication data */
+	u32 ipc_offset;
+	u32 reserved01[7];
+	/* Offset where to find the start of the CPU code */
+	u32 cpu_code_offset;
+	u32 reserved02[3];
+	/* Offset where to find the start of the APU code */
+	u32 apu_code_offset;
+	u32 reserved03[3];
+	/* Offset where to find the start of the HPU code */
+	u32 hpu_code_offset;
+	u32 reserved04[3];
+	/* Offset where to find the start of the PPU code */
+	u32 ppu_code_offset;
+	u32 reserved05[3];
+
+	/* These fields form Inter-Processor Communication data which is used
+	   by all processors to locate the information needed for communicating
+	   with other processors */
+
+	/* Fields for CPU: */
+
+	/* bit 0: 1/0 processor ready/not ready. Set other bits to 0. */
+	u32 cpu_state;
+	u32 reserved1[7];
+	/* Offset to the mailbox used for sending commands from APU to CPU */
+	u32 apu2cpu_mb_offset;
+	/* Value to write to register SW1 register set (0xC7003100) after the
+	   command is ready */
+	u32 apu2cpu_irq;
+	/* Value to write to register SW2 register set (0xC7003140) after the
+	   command is cleared */
+	u32 cpu2apu_irq_ack;
+	u32 reserved2[13];
+
+	u32 hpu2cpu_mb_offset;
+	u32 hpu2cpu_irq;
+	u32 cpu2hpu_irq_ack;
+	u32 reserved3[13];
+
+	u32 ppu2cpu_mb_offset;
+	u32 ppu2cpu_irq;
+	u32 cpu2ppu_irq_ack;
+	u32 reserved4[13];
+
+	u32 epu2cpu_mb_offset;
+	u32 epu2cpu_irq;
+	u32 cpu2epu_irq_ack;
+	u32 reserved5[13];
+	u32 reserved6[8];
+
+	/* Fields for APU: */
+
+	u32 apu_state;
+	u32 reserved11[7];
+	u32 cpu2apu_mb_offset;
+	u32 cpu2apu_irq;
+	u32 apu2cpu_irq_ack;
+	u32 reserved12[13];
+
+	u32 hpu2apu_mb_offset;
+	u32 hpu2apu_irq;
+	u32 apu2hpu_irq_ack;
+	u32 reserved13[13];
+
+	u32 ppu2apu_mb_offset;
+	u32 ppu2apu_irq;
+	u32 apu2ppu_irq_ack;
+	u32 reserved14[13];
+
+	u32 epu2apu_mb_offset;
+	u32 epu2apu_irq;
+	u32 apu2epu_irq_ack;
+	u32 reserved15[13];
+	u32 reserved16[8];
+
+	/* Fields for HPU: */
+
+	u32 hpu_state;
+	u32 reserved21[7];
+	u32 cpu2hpu_mb_offset;
+	u32 cpu2hpu_irq;
+	u32 hpu2cpu_irq_ack;
+	u32 reserved22[13];
+
+	u32 apu2hpu_mb_offset;
+	u32 apu2hpu_irq;
+	u32 hpu2apu_irq_ack;
+	u32 reserved23[13];
+
+	u32 ppu2hpu_mb_offset;
+	u32 ppu2hpu_irq;
+	u32 hpu2ppu_irq_ack;
+	u32 reserved24[13];
+
+	u32 epu2hpu_mb_offset;
+	u32 epu2hpu_irq;
+	u32 hpu2epu_irq_ack;
+	u32 reserved25[13];
+	u32 reserved26[8];
+
+	/* Fields for PPU: */
+
+	u32 ppu_state;
+	u32 reserved31[7];
+	u32 cpu2ppu_mb_offset;
+	u32 cpu2ppu_irq;
+	u32 ppu2cpu_irq_ack;
+	u32 reserved32[13];
+
+	u32 apu2ppu_mb_offset;
+	u32 apu2ppu_irq;
+	u32 ppu2apu_irq_ack;
+	u32 reserved33[13];
+
+	u32 hpu2ppu_mb_offset;
+	u32 hpu2ppu_irq;
+	u32 ppu2hpu_irq_ack;
+	u32 reserved34[13];
+
+	u32 epu2ppu_mb_offset;
+	u32 epu2ppu_irq;
+	u32 ppu2epu_irq_ack;
+	u32 reserved35[13];
+	u32 reserved36[8];
+
+	/* Fields for EPU: */
+
+	u32 epu_state;
+	u32 reserved41[7];
+	u32 cpu2epu_mb_offset;
+	u32 cpu2epu_irq;
+	u32 epu2cpu_irq_ack;
+	u32 reserved42[13];
+
+	u32 apu2epu_mb_offset;
+	u32 apu2epu_irq;
+	u32 epu2apu_irq_ack;
+	u32 reserved43[13];
+
+	u32 hpu2epu_mb_offset;
+	u32 hpu2epu_irq;
+	u32 epu2hpu_irq_ack;
+	u32 reserved44[13];
+
+	u32 ppu2epu_mb_offset;
+	u32 ppu2epu_irq;
+	u32 epu2ppu_irq_ack;
+	u32 reserved45[13];
+	u32 reserved46[8];
+
+	u32 semaphores[8];  /* Semaphores */
+
+	u32 reserved50[32]; /* Reserved for future use */
+
+	struct cx18_mailbox  apu2cpu_mb;
+	struct cx18_mailbox  hpu2cpu_mb;
+	struct cx18_mailbox  ppu2cpu_mb;
+	struct cx18_mailbox  epu2cpu_mb;
+
+	struct cx18_mailbox  cpu2apu_mb;
+	struct cx18_mailbox  hpu2apu_mb;
+	struct cx18_mailbox  ppu2apu_mb;
+	struct cx18_mailbox  epu2apu_mb;
+
+	struct cx18_mailbox  cpu2hpu_mb;
+	struct cx18_mailbox  apu2hpu_mb;
+	struct cx18_mailbox  ppu2hpu_mb;
+	struct cx18_mailbox  epu2hpu_mb;
+
+	struct cx18_mailbox  cpu2ppu_mb;
+	struct cx18_mailbox  apu2ppu_mb;
+	struct cx18_mailbox  hpu2ppu_mb;
+	struct cx18_mailbox  epu2ppu_mb;
+
+	struct cx18_mailbox  cpu2epu_mb;
+	struct cx18_mailbox  apu2epu_mb;
+	struct cx18_mailbox  hpu2epu_mb;
+	struct cx18_mailbox  ppu2epu_mb;
+
+	struct cx18_mdl_ack  cpu_mdl_ack[CX18_MAX_STREAMS][CX18_MAX_MDL_ACKS];
+	struct cx18_mdl_ent  cpu_mdl[1];
+};
+
+void cx18_init_scb(struct cx18 *cx);
+
+#endif
diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c
new file mode 100644
index 000000000..b36f4ce25
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-streams.c
@@ -0,0 +1,1048 @@
+/*
+ *  cx18 init/start/stop/exit stream functions
+ *
+ *  Derived from ivtv-streams.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-fileops.h"
+#include "cx18-mailbox.h"
+#include "cx18-i2c.h"
+#include "cx18-queue.h"
+#include "cx18-ioctl.h"
+#include "cx18-streams.h"
+#include "cx18-cards.h"
+#include "cx18-scb.h"
+#include "cx18-dvb.h"
+
+#define CX18_DSP0_INTERRUPT_MASK	0xd0004C
+
+static const struct v4l2_file_operations cx18_v4l2_enc_fops = {
+	.owner = THIS_MODULE,
+	.read = cx18_v4l2_read,
+	.open = cx18_v4l2_open,
+	.unlocked_ioctl = video_ioctl2,
+	.release = cx18_v4l2_close,
+	.poll = cx18_v4l2_enc_poll,
+	.mmap = cx18_v4l2_mmap,
+};
+
+/* offset from 0 to register ts v4l2 minors on */
+#define CX18_V4L2_ENC_TS_OFFSET   16
+/* offset from 0 to register pcm v4l2 minors on */
+#define CX18_V4L2_ENC_PCM_OFFSET  24
+/* offset from 0 to register yuv v4l2 minors on */
+#define CX18_V4L2_ENC_YUV_OFFSET  32
+
+static struct {
+	const char *name;
+	int vfl_type;
+	int num_offset;
+	int dma;
+	u32 caps;
+} cx18_stream_info[] = {
+	{	/* CX18_ENC_STREAM_TYPE_MPG */
+		"encoder MPEG",
+		VFL_TYPE_GRABBER, 0,
+		PCI_DMA_FROMDEVICE,
+		V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+		V4L2_CAP_AUDIO | V4L2_CAP_TUNER
+	},
+	{	/* CX18_ENC_STREAM_TYPE_TS */
+		"TS",
+		VFL_TYPE_GRABBER, -1,
+		PCI_DMA_FROMDEVICE,
+	},
+	{	/* CX18_ENC_STREAM_TYPE_YUV */
+		"encoder YUV",
+		VFL_TYPE_GRABBER, CX18_V4L2_ENC_YUV_OFFSET,
+		PCI_DMA_FROMDEVICE,
+		V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+		V4L2_CAP_STREAMING | V4L2_CAP_AUDIO | V4L2_CAP_TUNER
+	},
+	{	/* CX18_ENC_STREAM_TYPE_VBI */
+		"encoder VBI",
+		VFL_TYPE_VBI, 0,
+		PCI_DMA_FROMDEVICE,
+		V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE |
+		V4L2_CAP_READWRITE | V4L2_CAP_TUNER
+	},
+	{	/* CX18_ENC_STREAM_TYPE_PCM */
+		"encoder PCM audio",
+		VFL_TYPE_GRABBER, CX18_V4L2_ENC_PCM_OFFSET,
+		PCI_DMA_FROMDEVICE,
+		V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE,
+	},
+	{	/* CX18_ENC_STREAM_TYPE_IDX */
+		"encoder IDX",
+		VFL_TYPE_GRABBER, -1,
+		PCI_DMA_FROMDEVICE,
+	},
+	{	/* CX18_ENC_STREAM_TYPE_RAD */
+		"encoder radio",
+		VFL_TYPE_RADIO, 0,
+		PCI_DMA_NONE,
+		V4L2_CAP_RADIO | V4L2_CAP_TUNER
+	},
+};
+
+
+static void cx18_dma_free(struct videobuf_queue *q,
+	struct cx18_stream *s, struct cx18_videobuf_buffer *buf)
+{
+	videobuf_waiton(q, &buf->vb, 0, 0);
+	videobuf_vmalloc_free(&buf->vb);
+	buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int cx18_prepare_buffer(struct videobuf_queue *q,
+	struct cx18_stream *s,
+	struct cx18_videobuf_buffer *buf,
+	u32 pixelformat,
+	unsigned int width, unsigned int height,
+	enum v4l2_field field)
+{
+	struct cx18 *cx = s->cx;
+	int rc = 0;
+
+	/* check settings */
+	buf->bytes_used = 0;
+
+	if ((width  < 48) || (height < 32))
+		return -EINVAL;
+
+	buf->vb.size = (width * height * 2);
+	if ((buf->vb.baddr != 0) && (buf->vb.bsize < buf->vb.size))
+		return -EINVAL;
+
+	/* alloc + fill struct (if changed) */
+	if (buf->vb.width != width || buf->vb.height != height ||
+	    buf->vb.field != field || s->pixelformat != pixelformat ||
+	    buf->tvnorm != cx->std) {
+
+		buf->vb.width  = width;
+		buf->vb.height = height;
+		buf->vb.field  = field;
+		buf->tvnorm    = cx->std;
+		s->pixelformat = pixelformat;
+
+		/* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2)))
+		   UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */
+		if (s->pixelformat == V4L2_PIX_FMT_HM12)
+			s->vb_bytes_per_frame = height * 720 * 3 / 2;
+		else
+			s->vb_bytes_per_frame = height * 720 * 2;
+		cx18_dma_free(q, s, buf);
+	}
+
+	if ((buf->vb.baddr != 0) && (buf->vb.bsize < buf->vb.size))
+		return -EINVAL;
+
+	if (buf->vb.field == 0)
+		buf->vb.field = V4L2_FIELD_INTERLACED;
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		buf->vb.width  = width;
+		buf->vb.height = height;
+		buf->vb.field  = field;
+		buf->tvnorm    = cx->std;
+		s->pixelformat = pixelformat;
+
+		/* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2)))
+		   UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */
+		if (s->pixelformat == V4L2_PIX_FMT_HM12)
+			s->vb_bytes_per_frame = height * 720 * 3 / 2;
+		else
+			s->vb_bytes_per_frame = height * 720 * 2;
+		rc = videobuf_iolock(q, &buf->vb, NULL);
+		if (rc != 0)
+			goto fail;
+	}
+	buf->vb.state = VIDEOBUF_PREPARED;
+	return 0;
+
+fail:
+	cx18_dma_free(q, s, buf);
+	return rc;
+
+}
+
+/* VB_MIN_BUFSIZE is lcm(1440 * 480, 1440 * 576)
+   1440 is a single line of 4:2:2 YUV at 720 luma samples wide
+*/
+#define VB_MIN_BUFFERS 32
+#define VB_MIN_BUFSIZE 4147200
+
+static int buffer_setup(struct videobuf_queue *q,
+	unsigned int *count, unsigned int *size)
+{
+	struct cx18_stream *s = q->priv_data;
+	struct cx18 *cx = s->cx;
+
+	*size = 2 * cx->cxhdl.width * cx->cxhdl.height;
+	if (*count == 0)
+		*count = VB_MIN_BUFFERS;
+
+	while (*size * *count > VB_MIN_BUFFERS * VB_MIN_BUFSIZE)
+		(*count)--;
+
+	q->field = V4L2_FIELD_INTERLACED;
+	q->last = V4L2_FIELD_INTERLACED;
+
+	return 0;
+}
+
+static int buffer_prepare(struct videobuf_queue *q,
+	struct videobuf_buffer *vb,
+	enum v4l2_field field)
+{
+	struct cx18_videobuf_buffer *buf =
+		container_of(vb, struct cx18_videobuf_buffer, vb);
+	struct cx18_stream *s = q->priv_data;
+	struct cx18 *cx = s->cx;
+
+	return cx18_prepare_buffer(q, s, buf, s->pixelformat,
+		cx->cxhdl.width, cx->cxhdl.height, field);
+}
+
+static void buffer_release(struct videobuf_queue *q,
+	struct videobuf_buffer *vb)
+{
+	struct cx18_videobuf_buffer *buf =
+		container_of(vb, struct cx18_videobuf_buffer, vb);
+	struct cx18_stream *s = q->priv_data;
+
+	cx18_dma_free(q, s, buf);
+}
+
+static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct cx18_videobuf_buffer *buf =
+		container_of(vb, struct cx18_videobuf_buffer, vb);
+	struct cx18_stream *s = q->priv_data;
+
+	buf->vb.state = VIDEOBUF_QUEUED;
+
+	list_add_tail(&buf->vb.queue, &s->vb_capture);
+}
+
+static const struct videobuf_queue_ops cx18_videobuf_qops = {
+	.buf_setup    = buffer_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_queue    = buffer_queue,
+	.buf_release  = buffer_release,
+};
+
+static void cx18_stream_init(struct cx18 *cx, int type)
+{
+	struct cx18_stream *s = &cx->streams[type];
+
+	memset(s, 0, sizeof(*s));
+
+	/* initialize cx18_stream fields */
+	s->dvb = NULL;
+	s->cx = cx;
+	s->type = type;
+	s->name = cx18_stream_info[type].name;
+	s->handle = CX18_INVALID_TASK_HANDLE;
+
+	s->dma = cx18_stream_info[type].dma;
+	s->v4l2_dev_caps = cx18_stream_info[type].caps;
+	s->buffers = cx->stream_buffers[type];
+	s->buf_size = cx->stream_buf_size[type];
+	INIT_LIST_HEAD(&s->buf_pool);
+	s->bufs_per_mdl = 1;
+	s->mdl_size = s->buf_size * s->bufs_per_mdl;
+
+	init_waitqueue_head(&s->waitq);
+	s->id = -1;
+	spin_lock_init(&s->q_free.lock);
+	cx18_queue_init(&s->q_free);
+	spin_lock_init(&s->q_busy.lock);
+	cx18_queue_init(&s->q_busy);
+	spin_lock_init(&s->q_full.lock);
+	cx18_queue_init(&s->q_full);
+	spin_lock_init(&s->q_idle.lock);
+	cx18_queue_init(&s->q_idle);
+
+	INIT_WORK(&s->out_work_order, cx18_out_work_handler);
+
+	INIT_LIST_HEAD(&s->vb_capture);
+	timer_setup(&s->vb_timeout, cx18_vb_timeout, 0);
+	spin_lock_init(&s->vb_lock);
+	if (type == CX18_ENC_STREAM_TYPE_YUV) {
+		spin_lock_init(&s->vbuf_q_lock);
+
+		s->vb_type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		videobuf_queue_vmalloc_init(&s->vbuf_q, &cx18_videobuf_qops,
+			&cx->pci_dev->dev, &s->vbuf_q_lock,
+			V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			V4L2_FIELD_INTERLACED,
+			sizeof(struct cx18_videobuf_buffer),
+			s, &cx->serialize_lock);
+
+		/* Assume the previous pixel default */
+		s->pixelformat = V4L2_PIX_FMT_HM12;
+		s->vb_bytes_per_frame = cx->cxhdl.height * 720 * 3 / 2;
+		s->vb_bytes_per_line = 720;
+	}
+}
+
+static int cx18_prep_dev(struct cx18 *cx, int type)
+{
+	struct cx18_stream *s = &cx->streams[type];
+	u32 cap = cx->v4l2_cap;
+	int num_offset = cx18_stream_info[type].num_offset;
+	int num = cx->instance + cx18_first_minor + num_offset;
+
+	/*
+	 * These five fields are always initialized.
+	 * For analog capture related streams, if video_dev.v4l2_dev == NULL then the
+	 * stream is not in use.
+	 * For the TS stream, if dvb == NULL then the stream is not in use.
+	 * In those cases no other fields but these four can be used.
+	 */
+	s->video_dev.v4l2_dev = NULL;
+	s->dvb = NULL;
+	s->cx = cx;
+	s->type = type;
+	s->name = cx18_stream_info[type].name;
+
+	/* Check whether the radio is supported */
+	if (type == CX18_ENC_STREAM_TYPE_RAD && !(cap & V4L2_CAP_RADIO))
+		return 0;
+
+	/* Check whether VBI is supported */
+	if (type == CX18_ENC_STREAM_TYPE_VBI &&
+	    !(cap & (V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE)))
+		return 0;
+
+	/* User explicitly selected 0 buffers for these streams, so don't
+	   create them. */
+	if (cx18_stream_info[type].dma != PCI_DMA_NONE &&
+	    cx->stream_buffers[type] == 0) {
+		CX18_INFO("Disabled %s device\n", cx18_stream_info[type].name);
+		return 0;
+	}
+
+	cx18_stream_init(cx, type);
+
+	/* Allocate the cx18_dvb struct only for the TS on cards with DTV */
+	if (type == CX18_ENC_STREAM_TYPE_TS) {
+		if (cx->card->hw_all & CX18_HW_DVB) {
+			s->dvb = kzalloc(sizeof(struct cx18_dvb), GFP_KERNEL);
+			if (s->dvb == NULL) {
+				CX18_ERR("Couldn't allocate cx18_dvb structure for %s\n",
+					 s->name);
+				return -ENOMEM;
+			}
+		} else {
+			/* Don't need buffers for the TS, if there is no DVB */
+			s->buffers = 0;
+		}
+	}
+
+	if (num_offset == -1)
+		return 0;
+
+	/* initialize the v4l2 video device structure */
+	snprintf(s->video_dev.name, sizeof(s->video_dev.name), "%s %s",
+		 cx->v4l2_dev.name, s->name);
+
+	s->video_dev.num = num;
+	s->video_dev.v4l2_dev = &cx->v4l2_dev;
+	s->video_dev.fops = &cx18_v4l2_enc_fops;
+	s->video_dev.release = video_device_release_empty;
+	if (cx->card->video_inputs->video_type == CX18_CARD_INPUT_VID_TUNER)
+		s->video_dev.tvnorms = cx->tuner_std;
+	else
+		s->video_dev.tvnorms = V4L2_STD_ALL;
+	s->video_dev.lock = &cx->serialize_lock;
+	cx18_set_funcs(&s->video_dev);
+	return 0;
+}
+
+/* Initialize v4l2 variables and register v4l2 devices */
+int cx18_streams_setup(struct cx18 *cx)
+{
+	int type, ret;
+
+	/* Setup V4L2 Devices */
+	for (type = 0; type < CX18_MAX_STREAMS; type++) {
+		/* Prepare device */
+		ret = cx18_prep_dev(cx, type);
+		if (ret < 0)
+			break;
+
+		/* Allocate Stream */
+		ret = cx18_stream_alloc(&cx->streams[type]);
+		if (ret < 0)
+			break;
+	}
+	if (type == CX18_MAX_STREAMS)
+		return 0;
+
+	/* One or more streams could not be initialized. Clean 'em all up. */
+	cx18_streams_cleanup(cx, 0);
+	return ret;
+}
+
+static int cx18_reg_dev(struct cx18 *cx, int type)
+{
+	struct cx18_stream *s = &cx->streams[type];
+	int vfl_type = cx18_stream_info[type].vfl_type;
+	const char *name;
+	int num, ret;
+
+	if (type == CX18_ENC_STREAM_TYPE_TS && s->dvb != NULL) {
+		ret = cx18_dvb_register(s);
+		if (ret < 0) {
+			CX18_ERR("DVB failed to register\n");
+			return ret;
+		}
+	}
+
+	if (s->video_dev.v4l2_dev == NULL)
+		return 0;
+
+	num = s->video_dev.num;
+	/* card number + user defined offset + device offset */
+	if (type != CX18_ENC_STREAM_TYPE_MPG) {
+		struct cx18_stream *s_mpg = &cx->streams[CX18_ENC_STREAM_TYPE_MPG];
+
+		if (s_mpg->video_dev.v4l2_dev)
+			num = s_mpg->video_dev.num
+			    + cx18_stream_info[type].num_offset;
+	}
+	video_set_drvdata(&s->video_dev, s);
+
+	/* Register device. First try the desired minor, then any free one. */
+	ret = video_register_device_no_warn(&s->video_dev, vfl_type, num);
+	if (ret < 0) {
+		CX18_ERR("Couldn't register v4l2 device for %s (device node number %d)\n",
+			s->name, num);
+		s->video_dev.v4l2_dev = NULL;
+		return ret;
+	}
+
+	name = video_device_node_name(&s->video_dev);
+
+	switch (vfl_type) {
+	case VFL_TYPE_GRABBER:
+		CX18_INFO("Registered device %s for %s (%d x %d.%02d kB)\n",
+			  name, s->name, cx->stream_buffers[type],
+			  cx->stream_buf_size[type] / 1024,
+			  (cx->stream_buf_size[type] * 100 / 1024) % 100);
+		break;
+
+	case VFL_TYPE_RADIO:
+		CX18_INFO("Registered device %s for %s\n", name, s->name);
+		break;
+
+	case VFL_TYPE_VBI:
+		if (cx->stream_buffers[type])
+			CX18_INFO("Registered device %s for %s (%d x %d bytes)\n",
+				  name, s->name, cx->stream_buffers[type],
+				  cx->stream_buf_size[type]);
+		else
+			CX18_INFO("Registered device %s for %s\n",
+				name, s->name);
+		break;
+	}
+
+	return 0;
+}
+
+/* Register v4l2 devices */
+int cx18_streams_register(struct cx18 *cx)
+{
+	int type;
+	int err;
+	int ret = 0;
+
+	/* Register V4L2 devices */
+	for (type = 0; type < CX18_MAX_STREAMS; type++) {
+		err = cx18_reg_dev(cx, type);
+		if (err && ret == 0)
+			ret = err;
+	}
+
+	if (ret == 0)
+		return 0;
+
+	/* One or more streams could not be initialized. Clean 'em all up. */
+	cx18_streams_cleanup(cx, 1);
+	return ret;
+}
+
+/* Unregister v4l2 devices */
+void cx18_streams_cleanup(struct cx18 *cx, int unregister)
+{
+	struct video_device *vdev;
+	int type;
+
+	/* Teardown all streams */
+	for (type = 0; type < CX18_MAX_STREAMS; type++) {
+
+		/* The TS has a cx18_dvb structure, not a video_device */
+		if (type == CX18_ENC_STREAM_TYPE_TS) {
+			if (cx->streams[type].dvb != NULL) {
+				if (unregister)
+					cx18_dvb_unregister(&cx->streams[type]);
+				kfree(cx->streams[type].dvb);
+				cx->streams[type].dvb = NULL;
+				cx18_stream_free(&cx->streams[type]);
+			}
+			continue;
+		}
+
+		/* No struct video_device, but can have buffers allocated */
+		if (type == CX18_ENC_STREAM_TYPE_IDX) {
+			/* If the module params didn't inhibit IDX ... */
+			if (cx->stream_buffers[type] != 0) {
+				cx->stream_buffers[type] = 0;
+				/*
+				 * Before calling cx18_stream_free(),
+				 * check if the IDX stream was actually set up.
+				 * Needed, since the cx18_probe() error path
+				 * exits through here as well as normal clean up
+				 */
+				if (cx->streams[type].buffers != 0)
+					cx18_stream_free(&cx->streams[type]);
+			}
+			continue;
+		}
+
+		/* If struct video_device exists, can have buffers allocated */
+		vdev = &cx->streams[type].video_dev;
+
+		if (vdev->v4l2_dev == NULL)
+			continue;
+
+		if (type == CX18_ENC_STREAM_TYPE_YUV)
+			videobuf_mmap_free(&cx->streams[type].vbuf_q);
+
+		cx18_stream_free(&cx->streams[type]);
+
+		video_unregister_device(vdev);
+	}
+}
+
+static void cx18_vbi_setup(struct cx18_stream *s)
+{
+	struct cx18 *cx = s->cx;
+	int raw = cx18_raw_vbi(cx);
+	u32 data[CX2341X_MBOX_MAX_DATA];
+	int lines;
+
+	if (cx->is_60hz) {
+		cx->vbi.count = 12;
+		cx->vbi.start[0] = 10;
+		cx->vbi.start[1] = 273;
+	} else {        /* PAL/SECAM */
+		cx->vbi.count = 18;
+		cx->vbi.start[0] = 6;
+		cx->vbi.start[1] = 318;
+	}
+
+	/* setup VBI registers */
+	if (raw)
+		v4l2_subdev_call(cx->sd_av, vbi, s_raw_fmt, &cx->vbi.in.fmt.vbi);
+	else
+		v4l2_subdev_call(cx->sd_av, vbi, s_sliced_fmt, &cx->vbi.in.fmt.sliced);
+
+	/*
+	 * Send the CX18_CPU_SET_RAW_VBI_PARAM API command to setup Encoder Raw
+	 * VBI when the first analog capture channel starts, as once it starts
+	 * (e.g. MPEG), we can't effect any change in the Encoder Raw VBI setup
+	 * (i.e. for the VBI capture channels).  We also send it for each
+	 * analog capture channel anyway just to make sure we get the proper
+	 * behavior
+	 */
+	if (raw) {
+		lines = cx->vbi.count * 2;
+	} else {
+		/*
+		 * For 525/60 systems, according to the VIP 2 & BT.656 std:
+		 * The EAV RP code's Field bit toggles on line 4, a few lines
+		 * after the Vertcal Blank bit has already toggled.
+		 * Tell the encoder to capture 21-4+1=18 lines per field,
+		 * since we want lines 10 through 21.
+		 *
+		 * For 625/50 systems, according to the VIP 2 & BT.656 std:
+		 * The EAV RP code's Field bit toggles on line 1, a few lines
+		 * after the Vertcal Blank bit has already toggled.
+		 * (We've actually set the digitizer so that the Field bit
+		 * toggles on line 2.) Tell the encoder to capture 23-2+1=22
+		 * lines per field, since we want lines 6 through 23.
+		 */
+		lines = cx->is_60hz ? (21 - 4 + 1) * 2 : (23 - 2 + 1) * 2;
+	}
+
+	data[0] = s->handle;
+	/* Lines per field */
+	data[1] = (lines / 2) | ((lines / 2) << 16);
+	/* bytes per line */
+	data[2] = (raw ? VBI_ACTIVE_SAMPLES
+		       : (cx->is_60hz ? VBI_HBLANK_SAMPLES_60HZ
+				      : VBI_HBLANK_SAMPLES_50HZ));
+	/* Every X number of frames a VBI interrupt arrives
+	   (frames as in 25 or 30 fps) */
+	data[3] = 1;
+	/*
+	 * Set the SAV/EAV RP codes to look for as start/stop points
+	 * when in VIP-1.1 mode
+	 */
+	if (raw) {
+		/*
+		 * Start codes for beginning of "active" line in vertical blank
+		 * 0x20 (               VerticalBlank                )
+		 * 0x60 (     EvenField VerticalBlank                )
+		 */
+		data[4] = 0x20602060;
+		/*
+		 * End codes for end of "active" raw lines and regular lines
+		 * 0x30 (               VerticalBlank HorizontalBlank)
+		 * 0x70 (     EvenField VerticalBlank HorizontalBlank)
+		 * 0x90 (Task                         HorizontalBlank)
+		 * 0xd0 (Task EvenField               HorizontalBlank)
+		 */
+		data[5] = 0x307090d0;
+	} else {
+		/*
+		 * End codes for active video, we want data in the hblank region
+		 * 0xb0 (Task         0 VerticalBlank HorizontalBlank)
+		 * 0xf0 (Task EvenField VerticalBlank HorizontalBlank)
+		 *
+		 * Since the V bit is only allowed to toggle in the EAV RP code,
+		 * just before the first active region line, these two
+		 * are problematic:
+		 * 0x90 (Task                         HorizontalBlank)
+		 * 0xd0 (Task EvenField               HorizontalBlank)
+		 *
+		 * We have set the digitzer such that we don't have to worry
+		 * about these problem codes.
+		 */
+		data[4] = 0xB0F0B0F0;
+		/*
+		 * Start codes for beginning of active line in vertical blank
+		 * 0xa0 (Task           VerticalBlank                )
+		 * 0xe0 (Task EvenField VerticalBlank                )
+		 */
+		data[5] = 0xA0E0A0E0;
+	}
+
+	CX18_DEBUG_INFO("Setup VBI h: %d lines %x bpl %d fr %d %x %x\n",
+			data[0], data[1], data[2], data[3], data[4], data[5]);
+
+	cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data);
+}
+
+void cx18_stream_rotate_idx_mdls(struct cx18 *cx)
+{
+	struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+	struct cx18_mdl *mdl;
+
+	if (!cx18_stream_enabled(s))
+		return;
+
+	/* Return if the firmware is not running low on MDLs */
+	if ((atomic_read(&s->q_free.depth) + atomic_read(&s->q_busy.depth)) >=
+					    CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN)
+		return;
+
+	/* Return if there are no MDLs to rotate back to the firmware */
+	if (atomic_read(&s->q_full.depth) < 2)
+		return;
+
+	/*
+	 * Take the oldest IDX MDL still holding data, and discard its index
+	 * entries by scheduling the MDL to go back to the firmware
+	 */
+	mdl = cx18_dequeue(s, &s->q_full);
+	if (mdl != NULL)
+		cx18_enqueue(s, mdl, &s->q_free);
+}
+
+static
+struct cx18_queue *_cx18_stream_put_mdl_fw(struct cx18_stream *s,
+					   struct cx18_mdl *mdl)
+{
+	struct cx18 *cx = s->cx;
+	struct cx18_queue *q;
+
+	/* Don't give it to the firmware, if we're not running a capture */
+	if (s->handle == CX18_INVALID_TASK_HANDLE ||
+	    test_bit(CX18_F_S_STOPPING, &s->s_flags) ||
+	    !test_bit(CX18_F_S_STREAMING, &s->s_flags))
+		return cx18_enqueue(s, mdl, &s->q_free);
+
+	q = cx18_enqueue(s, mdl, &s->q_busy);
+	if (q != &s->q_busy)
+		return q; /* The firmware has the max MDLs it can handle */
+
+	cx18_mdl_sync_for_device(s, mdl);
+	cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
+		  (void __iomem *) &cx->scb->cpu_mdl[mdl->id] - cx->enc_mem,
+		  s->bufs_per_mdl, mdl->id, s->mdl_size);
+	return q;
+}
+
+static
+void _cx18_stream_load_fw_queue(struct cx18_stream *s)
+{
+	struct cx18_queue *q;
+	struct cx18_mdl *mdl;
+
+	if (atomic_read(&s->q_free.depth) == 0 ||
+	    atomic_read(&s->q_busy.depth) >= CX18_MAX_FW_MDLS_PER_STREAM)
+		return;
+
+	/* Move from q_free to q_busy notifying the firmware, until the limit */
+	do {
+		mdl = cx18_dequeue(s, &s->q_free);
+		if (mdl == NULL)
+			break;
+		q = _cx18_stream_put_mdl_fw(s, mdl);
+	} while (atomic_read(&s->q_busy.depth) < CX18_MAX_FW_MDLS_PER_STREAM
+		 && q == &s->q_busy);
+}
+
+void cx18_out_work_handler(struct work_struct *work)
+{
+	struct cx18_stream *s =
+			 container_of(work, struct cx18_stream, out_work_order);
+
+	_cx18_stream_load_fw_queue(s);
+}
+
+static void cx18_stream_configure_mdls(struct cx18_stream *s)
+{
+	cx18_unload_queues(s);
+
+	switch (s->type) {
+	case CX18_ENC_STREAM_TYPE_YUV:
+		/*
+		 * Height should be a multiple of 32 lines.
+		 * Set the MDL size to the exact size needed for one frame.
+		 * Use enough buffers per MDL to cover the MDL size
+		 */
+		if (s->pixelformat == V4L2_PIX_FMT_HM12)
+			s->mdl_size = 720 * s->cx->cxhdl.height * 3 / 2;
+		else
+			s->mdl_size = 720 * s->cx->cxhdl.height * 2;
+		s->bufs_per_mdl = s->mdl_size / s->buf_size;
+		if (s->mdl_size % s->buf_size)
+			s->bufs_per_mdl++;
+		break;
+	case CX18_ENC_STREAM_TYPE_VBI:
+		s->bufs_per_mdl = 1;
+		if  (cx18_raw_vbi(s->cx)) {
+			s->mdl_size = (s->cx->is_60hz ? 12 : 18)
+						       * 2 * VBI_ACTIVE_SAMPLES;
+		} else {
+			/*
+			 * See comment in cx18_vbi_setup() below about the
+			 * extra lines we capture in sliced VBI mode due to
+			 * the lines on which EAV RP codes toggle.
+			*/
+			s->mdl_size = s->cx->is_60hz
+				   ? (21 - 4 + 1) * 2 * VBI_HBLANK_SAMPLES_60HZ
+				   : (23 - 2 + 1) * 2 * VBI_HBLANK_SAMPLES_50HZ;
+		}
+		break;
+	default:
+		s->bufs_per_mdl = 1;
+		s->mdl_size = s->buf_size * s->bufs_per_mdl;
+		break;
+	}
+
+	cx18_load_queues(s);
+}
+
+int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
+{
+	u32 data[MAX_MB_ARGUMENTS];
+	struct cx18 *cx = s->cx;
+	int captype = 0;
+	struct cx18_stream *s_idx;
+
+	if (!cx18_stream_enabled(s))
+		return -EINVAL;
+
+	CX18_DEBUG_INFO("Start encoder stream %s\n", s->name);
+
+	switch (s->type) {
+	case CX18_ENC_STREAM_TYPE_MPG:
+		captype = CAPTURE_CHANNEL_TYPE_MPEG;
+		cx->mpg_data_received = cx->vbi_data_inserted = 0;
+		cx->dualwatch_jiffies = jiffies;
+		cx->dualwatch_stereo_mode = v4l2_ctrl_g_ctrl(cx->cxhdl.audio_mode);
+		cx->search_pack_header = 0;
+		break;
+
+	case CX18_ENC_STREAM_TYPE_IDX:
+		captype = CAPTURE_CHANNEL_TYPE_INDEX;
+		break;
+	case CX18_ENC_STREAM_TYPE_TS:
+		captype = CAPTURE_CHANNEL_TYPE_TS;
+		break;
+	case CX18_ENC_STREAM_TYPE_YUV:
+		captype = CAPTURE_CHANNEL_TYPE_YUV;
+		break;
+	case CX18_ENC_STREAM_TYPE_PCM:
+		captype = CAPTURE_CHANNEL_TYPE_PCM;
+		break;
+	case CX18_ENC_STREAM_TYPE_VBI:
+#ifdef CX18_ENCODER_PARSES_SLICED
+		captype = cx18_raw_vbi(cx) ?
+		     CAPTURE_CHANNEL_TYPE_VBI : CAPTURE_CHANNEL_TYPE_SLICED_VBI;
+#else
+		/*
+		 * Currently we set things up so that Sliced VBI from the
+		 * digitizer is handled as Raw VBI by the encoder
+		 */
+		captype = CAPTURE_CHANNEL_TYPE_VBI;
+#endif
+		cx->vbi.frame = 0;
+		cx->vbi.inserted_frame = 0;
+		memset(cx->vbi.sliced_mpeg_size,
+			0, sizeof(cx->vbi.sliced_mpeg_size));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Clear Streamoff flags in case left from last capture */
+	clear_bit(CX18_F_S_STREAMOFF, &s->s_flags);
+
+	cx18_vapi_result(cx, data, CX18_CREATE_TASK, 1, CPU_CMD_MASK_CAPTURE);
+	s->handle = data[0];
+	cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype);
+
+	/*
+	 * For everything but CAPTURE_CHANNEL_TYPE_TS, play it safe and
+	 * set up all the parameters, as it is not obvious which parameters the
+	 * firmware shares across capture channel types and which it does not.
+	 *
+	 * Some of the cx18_vapi() calls below apply to only certain capture
+	 * channel types.  We're hoping there's no harm in calling most of them
+	 * anyway, as long as the values are all consistent.  Setting some
+	 * shared parameters will have no effect once an analog capture channel
+	 * has started streaming.
+	 */
+	if (captype != CAPTURE_CHANNEL_TYPE_TS) {
+		cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0);
+		cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1);
+		cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 8, 0);
+		cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 4, 1);
+
+		/*
+		 * Audio related reset according to
+		 * Documentation/media/v4l-drivers/cx2341x.rst
+		 */
+		if (atomic_read(&cx->ana_capturing) == 0)
+			cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2,
+				  s->handle, 12);
+
+		/*
+		 * Number of lines for Field 1 & Field 2 according to
+		 * Documentation/media/v4l-drivers/cx2341x.rst
+		 * Field 1 is 312 for 625 line systems in BT.656
+		 * Field 2 is 313 for 625 line systems in BT.656
+		 */
+		cx18_vapi(cx, CX18_CPU_SET_CAPTURE_LINE_NO, 3,
+			  s->handle, 312, 313);
+
+		if (cx->v4l2_cap & V4L2_CAP_VBI_CAPTURE)
+			cx18_vbi_setup(s);
+
+		/*
+		 * Select to receive I, P, and B frame index entries, if the
+		 * index stream is enabled.  Otherwise disable index entry
+		 * generation.
+		 */
+		s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
+		cx18_vapi_result(cx, data, CX18_CPU_SET_INDEXTABLE, 2,
+				 s->handle, cx18_stream_enabled(s_idx) ? 7 : 0);
+
+		/* Call out to the common CX2341x API setup for user controls */
+		cx->cxhdl.priv = s;
+		cx2341x_handler_setup(&cx->cxhdl);
+
+		/*
+		 * When starting a capture and we're set for radio,
+		 * ensure the video is muted, despite the user control.
+		 */
+		if (!cx->cxhdl.video_mute &&
+		    test_bit(CX18_F_I_RADIO_USER, &cx->i_flags))
+			cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle,
+			  (v4l2_ctrl_g_ctrl(cx->cxhdl.video_mute_yuv) << 8) | 1);
+
+		/* Enable the Video Format Converter for UYVY 4:2:2 support,
+		 * rather than the default HM12 Macroblovk 4:2:0 support.
+		 */
+		if (captype == CAPTURE_CHANNEL_TYPE_YUV) {
+			if (s->pixelformat == V4L2_PIX_FMT_UYVY)
+				cx18_vapi(cx, CX18_CPU_SET_VFC_PARAM, 2,
+					s->handle, 1);
+			else
+				/* If in doubt, default to HM12 */
+				cx18_vapi(cx, CX18_CPU_SET_VFC_PARAM, 2,
+					s->handle, 0);
+		}
+	}
+
+	if (atomic_read(&cx->tot_capturing) == 0) {
+		cx2341x_handler_set_busy(&cx->cxhdl, 1);
+		clear_bit(CX18_F_I_EOS, &cx->i_flags);
+		cx18_write_reg(cx, 7, CX18_DSP0_INTERRUPT_MASK);
+	}
+
+	cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle,
+		(void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
+		(void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
+
+	/* Init all the cpu_mdls for this stream */
+	cx18_stream_configure_mdls(s);
+	_cx18_stream_load_fw_queue(s);
+
+	/* begin_capture */
+	if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) {
+		CX18_DEBUG_WARN("Error starting capture!\n");
+		/* Ensure we're really not capturing before releasing MDLs */
+		set_bit(CX18_F_S_STOPPING, &s->s_flags);
+		if (s->type == CX18_ENC_STREAM_TYPE_MPG)
+			cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, 1);
+		else
+			cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle);
+		clear_bit(CX18_F_S_STREAMING, &s->s_flags);
+		/* FIXME - CX18_F_S_STREAMOFF as well? */
+		cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle);
+		cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
+		s->handle = CX18_INVALID_TASK_HANDLE;
+		clear_bit(CX18_F_S_STOPPING, &s->s_flags);
+		if (atomic_read(&cx->tot_capturing) == 0) {
+			set_bit(CX18_F_I_EOS, &cx->i_flags);
+			cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK);
+		}
+		return -EINVAL;
+	}
+
+	/* you're live! sit back and await interrupts :) */
+	if (captype != CAPTURE_CHANNEL_TYPE_TS)
+		atomic_inc(&cx->ana_capturing);
+	atomic_inc(&cx->tot_capturing);
+	return 0;
+}
+EXPORT_SYMBOL(cx18_start_v4l2_encode_stream);
+
+void cx18_stop_all_captures(struct cx18 *cx)
+{
+	int i;
+
+	for (i = CX18_MAX_STREAMS - 1; i >= 0; i--) {
+		struct cx18_stream *s = &cx->streams[i];
+
+		if (!cx18_stream_enabled(s))
+			continue;
+		if (test_bit(CX18_F_S_STREAMING, &s->s_flags))
+			cx18_stop_v4l2_encode_stream(s, 0);
+	}
+}
+
+int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end)
+{
+	struct cx18 *cx = s->cx;
+
+	if (!cx18_stream_enabled(s))
+		return -EINVAL;
+
+	/* This function assumes that you are allowed to stop the capture
+	   and that we are actually capturing */
+
+	CX18_DEBUG_INFO("Stop Capture\n");
+
+	if (atomic_read(&cx->tot_capturing) == 0)
+		return 0;
+
+	set_bit(CX18_F_S_STOPPING, &s->s_flags);
+	if (s->type == CX18_ENC_STREAM_TYPE_MPG)
+		cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, !gop_end);
+	else
+		cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle);
+
+	if (s->type == CX18_ENC_STREAM_TYPE_MPG && gop_end) {
+		CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n");
+	}
+
+	if (s->type != CX18_ENC_STREAM_TYPE_TS)
+		atomic_dec(&cx->ana_capturing);
+	atomic_dec(&cx->tot_capturing);
+
+	/* Clear capture and no-read bits */
+	clear_bit(CX18_F_S_STREAMING, &s->s_flags);
+
+	/* Tell the CX23418 it can't use our buffers anymore */
+	cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle);
+
+	cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
+	s->handle = CX18_INVALID_TASK_HANDLE;
+	clear_bit(CX18_F_S_STOPPING, &s->s_flags);
+
+	if (atomic_read(&cx->tot_capturing) > 0)
+		return 0;
+
+	cx2341x_handler_set_busy(&cx->cxhdl, 0);
+	cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK);
+	wake_up(&s->waitq);
+
+	return 0;
+}
+EXPORT_SYMBOL(cx18_stop_v4l2_encode_stream);
+
+u32 cx18_find_handle(struct cx18 *cx)
+{
+	int i;
+
+	/* find first available handle to be used for global settings */
+	for (i = 0; i < CX18_MAX_STREAMS; i++) {
+		struct cx18_stream *s = &cx->streams[i];
+
+		if (s->video_dev.v4l2_dev && (s->handle != CX18_INVALID_TASK_HANDLE))
+			return s->handle;
+	}
+	return CX18_INVALID_TASK_HANDLE;
+}
+
+struct cx18_stream *cx18_handle_to_stream(struct cx18 *cx, u32 handle)
+{
+	int i;
+	struct cx18_stream *s;
+
+	if (handle == CX18_INVALID_TASK_HANDLE)
+		return NULL;
+
+	for (i = 0; i < CX18_MAX_STREAMS; i++) {
+		s = &cx->streams[i];
+		if (s->handle != handle)
+			continue;
+		if (cx18_stream_enabled(s))
+			return s;
+	}
+	return NULL;
+}
diff --git a/drivers/media/pci/cx18/cx18-streams.h b/drivers/media/pci/cx18/cx18-streams.h
new file mode 100644
index 000000000..75c86f1b2
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-streams.h
@@ -0,0 +1,57 @@
+/*
+ *  cx18 init/start/stop/exit stream functions
+ *
+ *  Derived from ivtv-streams.h
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+u32 cx18_find_handle(struct cx18 *cx);
+struct cx18_stream *cx18_handle_to_stream(struct cx18 *cx, u32 handle);
+int cx18_streams_setup(struct cx18 *cx);
+int cx18_streams_register(struct cx18 *cx);
+void cx18_streams_cleanup(struct cx18 *cx, int unregister);
+
+#define CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN (3)
+void cx18_stream_rotate_idx_mdls(struct cx18 *cx);
+
+static inline bool cx18_stream_enabled(struct cx18_stream *s)
+{
+	return s->video_dev.v4l2_dev ||
+	       (s->dvb && s->dvb->enabled) ||
+	       (s->type == CX18_ENC_STREAM_TYPE_IDX &&
+		s->cx->stream_buffers[CX18_ENC_STREAM_TYPE_IDX] != 0);
+}
+
+/* Related to submission of mdls to firmware */
+static inline void cx18_stream_load_fw_queue(struct cx18_stream *s)
+{
+	schedule_work(&s->out_work_order);
+}
+
+static inline void cx18_stream_put_mdl_fw(struct cx18_stream *s,
+					  struct cx18_mdl *mdl)
+{
+	/* Put mdl on q_free; the out work handler will move mdl(s) to q_busy */
+	cx18_enqueue(s, mdl, &s->q_free);
+	cx18_stream_load_fw_queue(s);
+}
+
+void cx18_out_work_handler(struct work_struct *work);
+
+/* Capture related */
+int cx18_start_v4l2_encode_stream(struct cx18_stream *s);
+int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end);
+
+void cx18_stop_all_captures(struct cx18 *cx);
diff --git a/drivers/media/pci/cx18/cx18-vbi.c b/drivers/media/pci/cx18/cx18-vbi.c
new file mode 100644
index 000000000..81f1e2743
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-vbi.c
@@ -0,0 +1,272 @@
+/*
+ *  cx18 Vertical Blank Interval support functions
+ *
+ *  Derived from ivtv-vbi.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-vbi.h"
+#include "cx18-ioctl.h"
+#include "cx18-queue.h"
+
+/*
+ * Raster Reference/Protection (RP) bytes, used in Start/End Active
+ * Video codes emitted from the digitzer in VIP 1.x mode, that flag the start
+ * of VBI sample or VBI ancillary data regions in the digitial ratser line.
+ *
+ * Task FieldEven VerticalBlank HorizontalBlank 0 0 0 0
+ */
+static const u8 raw_vbi_sav_rp[2] = { 0x20, 0x60 };    /* __V_, _FV_ */
+static const u8 sliced_vbi_eav_rp[2] = { 0xb0, 0xf0 }; /* T_VH, TFVH */
+
+static void copy_vbi_data(struct cx18 *cx, int lines, u32 pts_stamp)
+{
+	int line = 0;
+	int i;
+	u32 linemask[2] = { 0, 0 };
+	unsigned short size;
+	static const u8 mpeg_hdr_data[] = {
+		/* MPEG-2 Program Pack */
+		0x00, 0x00, 0x01, 0xba,		    /* Prog Pack start code */
+		0x44, 0x00, 0x0c, 0x66, 0x24, 0x01, /* SCR, SCR Ext, markers */
+		0x01, 0xd1, 0xd3,		    /* Mux Rate, markers */
+		0xfa, 0xff, 0xff,		    /* Res, Suff cnt, Stuff */
+		/* MPEG-2 Private Stream 1 PES Packet */
+		0x00, 0x00, 0x01, 0xbd,		    /* Priv Stream 1 start */
+		0x00, 0x1a,			    /* length */
+		0x84, 0x80, 0x07,		    /* flags, hdr data len */
+		0x21, 0x00, 0x5d, 0x63, 0xa7,	    /* PTS, markers */
+		0xff, 0xff			    /* stuffing */
+	};
+	const int sd = sizeof(mpeg_hdr_data);	/* start of vbi data */
+	int idx = cx->vbi.frame % CX18_VBI_FRAMES;
+	u8 *dst = &cx->vbi.sliced_mpeg_data[idx][0];
+
+	for (i = 0; i < lines; i++) {
+		struct v4l2_sliced_vbi_data *sdata = cx->vbi.sliced_data + i;
+		int f, l;
+
+		if (sdata->id == 0)
+			continue;
+
+		l = sdata->line - 6;
+		f = sdata->field;
+		if (f)
+			l += 18;
+		if (l < 32)
+			linemask[0] |= (1 << l);
+		else
+			linemask[1] |= (1 << (l - 32));
+		dst[sd + 12 + line * 43] = cx18_service2vbi(sdata->id);
+		memcpy(dst + sd + 12 + line * 43 + 1, sdata->data, 42);
+		line++;
+	}
+	memcpy(dst, mpeg_hdr_data, sizeof(mpeg_hdr_data));
+	if (line == 36) {
+		/* All lines are used, so there is no space for the linemask
+		   (the max size of the VBI data is 36 * 43 + 4 bytes).
+		   So in this case we use the magic number 'ITV0'. */
+		memcpy(dst + sd, "ITV0", 4);
+		memmove(dst + sd + 4, dst + sd + 12, line * 43);
+		size = 4 + ((43 * line + 3) & ~3);
+	} else {
+		memcpy(dst + sd, "itv0", 4);
+		cpu_to_le32s(&linemask[0]);
+		cpu_to_le32s(&linemask[1]);
+		memcpy(dst + sd + 4, &linemask[0], 8);
+		size = 12 + ((43 * line + 3) & ~3);
+	}
+	dst[4+16] = (size + 10) >> 8;
+	dst[5+16] = (size + 10) & 0xff;
+	dst[9+16] = 0x21 | ((pts_stamp >> 29) & 0x6);
+	dst[10+16] = (pts_stamp >> 22) & 0xff;
+	dst[11+16] = 1 | ((pts_stamp >> 14) & 0xff);
+	dst[12+16] = (pts_stamp >> 7) & 0xff;
+	dst[13+16] = 1 | ((pts_stamp & 0x7f) << 1);
+	cx->vbi.sliced_mpeg_size[idx] = sd + size;
+}
+
+/* Compress raw VBI format, removes leading SAV codes and surplus space
+   after the frame.  Returns new compressed size. */
+/* FIXME - this function ignores the input size. */
+static u32 compress_raw_buf(struct cx18 *cx, u8 *buf, u32 size, u32 hdr_size)
+{
+	u32 line_size = VBI_ACTIVE_SAMPLES;
+	u32 lines = cx->vbi.count * 2;
+	u8 *q = buf;
+	u8 *p;
+	int i;
+
+	/* Skip the header */
+	buf += hdr_size;
+
+	for (i = 0; i < lines; i++) {
+		p = buf + i * line_size;
+
+		/* Look for SAV code */
+		if (p[0] != 0xff || p[1] || p[2] ||
+		    (p[3] != raw_vbi_sav_rp[0] &&
+		     p[3] != raw_vbi_sav_rp[1]))
+			break;
+		if (i == lines - 1) {
+			/* last line is hdr_size bytes short - extrapolate it */
+			memcpy(q, p + 4, line_size - 4 - hdr_size);
+			q += line_size - 4 - hdr_size;
+			p += line_size - hdr_size - 1;
+			memset(q, (int) *p, hdr_size);
+		} else {
+			memcpy(q, p + 4, line_size - 4);
+			q += line_size - 4;
+		}
+	}
+	return lines * (line_size - 4);
+}
+
+static u32 compress_sliced_buf(struct cx18 *cx, u8 *buf, u32 size,
+			       const u32 hdr_size)
+{
+	struct v4l2_decode_vbi_line vbi;
+	int i;
+	u32 line = 0;
+	u32 line_size = cx->is_60hz ? VBI_HBLANK_SAMPLES_60HZ
+				    : VBI_HBLANK_SAMPLES_50HZ;
+
+	/* find the first valid line */
+	for (i = hdr_size, buf += hdr_size; i < size; i++, buf++) {
+		if (buf[0] == 0xff && !buf[1] && !buf[2] &&
+		    (buf[3] == sliced_vbi_eav_rp[0] ||
+		     buf[3] == sliced_vbi_eav_rp[1]))
+			break;
+	}
+
+	/*
+	 * The last line is short by hdr_size bytes, but for the remaining
+	 * checks against size, we pretend that it is not, by counting the
+	 * header bytes we knowingly skipped
+	 */
+	size -= (i - hdr_size);
+	if (size < line_size)
+		return line;
+
+	for (i = 0; i < size / line_size; i++) {
+		u8 *p = buf + i * line_size;
+
+		/* Look for EAV code  */
+		if (p[0] != 0xff || p[1] || p[2] ||
+		    (p[3] != sliced_vbi_eav_rp[0] &&
+		     p[3] != sliced_vbi_eav_rp[1]))
+			continue;
+		vbi.p = p + 4;
+		v4l2_subdev_call(cx->sd_av, vbi, decode_vbi_line, &vbi);
+		if (vbi.type) {
+			cx->vbi.sliced_data[line].id = vbi.type;
+			cx->vbi.sliced_data[line].field = vbi.is_second_field;
+			cx->vbi.sliced_data[line].line = vbi.line;
+			memcpy(cx->vbi.sliced_data[line].data, vbi.p, 42);
+			line++;
+		}
+	}
+	return line;
+}
+
+static void _cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf)
+{
+	/*
+	 * The CX23418 provides a 12 byte header in its raw VBI buffers to us:
+	 * 0x3fffffff [4 bytes of something] [4 byte presentation time stamp]
+	 */
+	struct vbi_data_hdr {
+		__be32 magic;
+		__be32 unknown;
+		__be32 pts;
+	} *hdr = (struct vbi_data_hdr *) buf->buf;
+
+	u8 *p = (u8 *) buf->buf;
+	u32 size = buf->bytesused;
+	u32 pts;
+	int lines;
+
+	/*
+	 * The CX23418 sends us data that is 32 bit little-endian swapped,
+	 * but we want the raw VBI bytes in the order they were in the raster
+	 * line.  This has a side effect of making the header big endian
+	 */
+	cx18_buf_swap(buf);
+
+	/* Raw VBI data */
+	if (cx18_raw_vbi(cx)) {
+
+		size = buf->bytesused =
+		     compress_raw_buf(cx, p, size, sizeof(struct vbi_data_hdr));
+
+		/*
+		 * Hack needed for compatibility with old VBI software.
+		 * Write the frame # at the last 4 bytes of the frame
+		 */
+		p += size - 4;
+		memcpy(p, &cx->vbi.frame, 4);
+		cx->vbi.frame++;
+		return;
+	}
+
+	/* Sliced VBI data with data insertion */
+
+	pts = (be32_to_cpu(hdr->magic) == 0x3fffffff) ? be32_to_cpu(hdr->pts)
+						      : 0;
+
+	lines = compress_sliced_buf(cx, p, size, sizeof(struct vbi_data_hdr));
+
+	/* always return at least one empty line */
+	if (lines == 0) {
+		cx->vbi.sliced_data[0].id = 0;
+		cx->vbi.sliced_data[0].line = 0;
+		cx->vbi.sliced_data[0].field = 0;
+		lines = 1;
+	}
+	buf->bytesused = size = lines * sizeof(cx->vbi.sliced_data[0]);
+	memcpy(p, &cx->vbi.sliced_data[0], size);
+
+	if (cx->vbi.insert_mpeg)
+		copy_vbi_data(cx, lines, pts);
+	cx->vbi.frame++;
+}
+
+void cx18_process_vbi_data(struct cx18 *cx, struct cx18_mdl *mdl,
+			   int streamtype)
+{
+	struct cx18_buffer *buf;
+	u32 orig_used;
+
+	if (streamtype != CX18_ENC_STREAM_TYPE_VBI)
+		return;
+
+	/*
+	 * Big assumption here:
+	 * Every buffer hooked to the MDL's buf_list is a complete VBI frame
+	 * that ends at the end of the buffer.
+	 *
+	 * To assume anything else would make the code in this file
+	 * more complex, or require extra memcpy()'s to make the
+	 * buffers satisfy the above assumption.  It's just simpler to set
+	 * up the encoder buffer transfers to make the assumption true.
+	 */
+	list_for_each_entry(buf, &mdl->buf_list, list) {
+		orig_used = buf->bytesused;
+		if (orig_used == 0)
+			break;
+		_cx18_process_vbi_data(cx, buf);
+		mdl->bytesused -= (orig_used - buf->bytesused);
+	}
+}
diff --git a/drivers/media/pci/cx18/cx18-vbi.h b/drivers/media/pci/cx18/cx18-vbi.h
new file mode 100644
index 000000000..8c514ea2d
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-vbi.h
@@ -0,0 +1,21 @@
+/*
+ *  cx18 Vertical Blank Interval support functions
+ *
+ *  Derived from ivtv-vbi.h
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+void cx18_process_vbi_data(struct cx18 *cx, struct cx18_mdl *mdl,
+			   int streamtype);
+int cx18_used_line(struct cx18 *cx, int line, int field);
diff --git a/drivers/media/pci/cx18/cx18-version.h b/drivers/media/pci/cx18/cx18-version.h
new file mode 100644
index 000000000..50728c68b
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-version.h
@@ -0,0 +1,23 @@
+/*
+ *  cx18 driver version information
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef CX18_VERSION_H
+#define CX18_VERSION_H
+
+#define CX18_DRIVER_NAME "cx18"
+#define CX18_VERSION "1.5.1"
+
+#endif
diff --git a/drivers/media/pci/cx18/cx18-video.c b/drivers/media/pci/cx18/cx18-video.c
new file mode 100644
index 000000000..697d01168
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-video.c
@@ -0,0 +1,27 @@
+/*
+ *  cx18 video interface functions
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-video.h"
+#include "cx18-cards.h"
+
+void cx18_video_set_io(struct cx18 *cx)
+{
+	int inp = cx->active_input;
+
+	v4l2_subdev_call(cx->sd_av, video, s_routing,
+			cx->card->video_inputs[inp].video_input, 0, 0);
+}
diff --git a/drivers/media/pci/cx18/cx18-video.h b/drivers/media/pci/cx18/cx18-video.h
new file mode 100644
index 000000000..f6eca36e7
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-video.h
@@ -0,0 +1,17 @@
+/*
+ *  cx18 video interface functions
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+void cx18_video_set_io(struct cx18 *cx);
diff --git a/drivers/media/pci/cx18/cx23418.h b/drivers/media/pci/cx18/cx23418.h
new file mode 100644
index 000000000..15205b662
--- /dev/null
+++ b/drivers/media/pci/cx18/cx23418.h
@@ -0,0 +1,487 @@
+/*
+ *  cx18 header containing common defines.
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef CX23418_H
+#define CX23418_H
+
+#include <media/drv-intf/cx2341x.h>
+
+#define MGR_CMD_MASK				0x40000000
+/* The MSB of the command code indicates that this is the completion of a
+   command */
+#define MGR_CMD_MASK_ACK			(MGR_CMD_MASK | 0x80000000)
+
+/* Description: This command creates a new instance of a certain task
+   IN[0]  - Task ID. This is one of the XPU_CMD_MASK_YYY where XPU is
+	    the processor on which the task YYY will be created
+   OUT[0] - Task handle. This handle is passed along with commands to
+	    dispatch to the right instance of the task
+   ReturnCode - One of the ERR_SYS_... */
+#define CX18_CREATE_TASK			(MGR_CMD_MASK | 0x0001)
+
+/* Description: This command destroys an instance of a task
+   IN[0] - Task handle. Hanlde of the task to destroy
+   ReturnCode - One of the ERR_SYS_... */
+#define CX18_DESTROY_TASK			(MGR_CMD_MASK | 0x0002)
+
+/* All commands for CPU have the following mask set */
+#define CPU_CMD_MASK				0x20000000
+#define CPU_CMD_MASK_DEBUG			(CPU_CMD_MASK | 0x00000000)
+#define CPU_CMD_MASK_ACK			(CPU_CMD_MASK | 0x80000000)
+#define CPU_CMD_MASK_CAPTURE			(CPU_CMD_MASK | 0x00020000)
+#define CPU_CMD_MASK_TS				(CPU_CMD_MASK | 0x00040000)
+
+#define EPU_CMD_MASK				0x02000000
+#define EPU_CMD_MASK_DEBUG			(EPU_CMD_MASK | 0x000000)
+#define EPU_CMD_MASK_DE				(EPU_CMD_MASK | 0x040000)
+
+#define APU_CMD_MASK				0x10000000
+#define APU_CMD_MASK_ACK			(APU_CMD_MASK | 0x80000000)
+
+#define CX18_APU_ENCODING_METHOD_MPEG		(0 << 28)
+#define CX18_APU_ENCODING_METHOD_AC3		(1 << 28)
+
+/* Description: Command APU to start audio
+   IN[0] - audio parameters (same as CX18_CPU_SET_AUDIO_PARAMETERS?)
+   IN[1] - caller buffer address, or 0
+   ReturnCode - ??? */
+#define CX18_APU_START				(APU_CMD_MASK | 0x01)
+
+/* Description: Command APU to stop audio
+   IN[0] - encoding method to stop
+   ReturnCode - ??? */
+#define CX18_APU_STOP				(APU_CMD_MASK | 0x02)
+
+/* Description: Command APU to reset the AI
+   ReturnCode - ??? */
+#define CX18_APU_RESETAI			(APU_CMD_MASK | 0x05)
+
+/* Description: This command indicates that a Memory Descriptor List has been
+   filled with the requested channel type
+   IN[0] - Task handle. Handle of the task
+   IN[1] - Offset of the MDL_ACK from the beginning of the local DDR.
+   IN[2] - Number of CNXT_MDL_ACK structures in the array pointed to by IN[1]
+   ReturnCode - One of the ERR_DE_... */
+#define CX18_EPU_DMA_DONE			(EPU_CMD_MASK_DE | 0x0001)
+
+/* Something interesting happened
+   IN[0] - A value to log
+   IN[1] - An offset of a string in the MiniMe memory;
+	   0/zero/NULL means "I have nothing to say" */
+#define CX18_EPU_DEBUG				(EPU_CMD_MASK_DEBUG | 0x0003)
+
+/* Reads memory/registers (32-bit)
+   IN[0] - Address
+   OUT[1] - Value */
+#define CX18_CPU_DEBUG_PEEK32			(CPU_CMD_MASK_DEBUG | 0x0003)
+
+/* Description: This command starts streaming with the set channel type
+   IN[0] - Task handle. Handle of the task to start
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_CAPTURE_START			(CPU_CMD_MASK_CAPTURE | 0x0002)
+
+/* Description: This command stops streaming with the set channel type
+   IN[0] - Task handle. Handle of the task to stop
+   IN[1] - 0 = stop at end of GOP, 1 = stop at end of frame (MPEG only)
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_CAPTURE_STOP			(CPU_CMD_MASK_CAPTURE | 0x0003)
+
+/* Description: This command pauses streaming with the set channel type
+   IN[0] - Task handle. Handle of the task to pause
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_CAPTURE_PAUSE			(CPU_CMD_MASK_CAPTURE | 0x0007)
+
+/* Description: This command resumes streaming with the set channel type
+   IN[0] - Task handle. Handle of the task to resume
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_CAPTURE_RESUME			(CPU_CMD_MASK_CAPTURE | 0x0008)
+
+#define CAPTURE_CHANNEL_TYPE_NONE		0
+#define CAPTURE_CHANNEL_TYPE_MPEG		1
+#define CAPTURE_CHANNEL_TYPE_INDEX		2
+#define CAPTURE_CHANNEL_TYPE_YUV		3
+#define CAPTURE_CHANNEL_TYPE_PCM		4
+#define CAPTURE_CHANNEL_TYPE_VBI		5
+#define CAPTURE_CHANNEL_TYPE_SLICED_VBI		6
+#define CAPTURE_CHANNEL_TYPE_TS			7
+#define CAPTURE_CHANNEL_TYPE_MAX		15
+
+/* Description: This command sets the channel type. This can only be done
+   when stopped.
+   IN[0] - Task handle. Handle of the task to start
+   IN[1] - Channel Type. See Below.
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_CHANNEL_TYPE		(CPU_CMD_MASK_CAPTURE + 1)
+
+/* Description: Set stream output type
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - type
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_STREAM_OUTPUT_TYPE		(CPU_CMD_MASK_CAPTURE | 0x0012)
+
+/* Description: Set video input resolution and frame rate
+   IN[0] - task handle
+   IN[1] - reserved
+   IN[2] - reserved
+   IN[3] - reserved
+   IN[4] - reserved
+   IN[5] - frame rate, 0 - 29.97f/s, 1 - 25f/s
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_VIDEO_IN			(CPU_CMD_MASK_CAPTURE | 0x0004)
+
+/* Description: Set video frame rate
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - video bit rate mode
+   IN[2] - video average rate
+   IN[3] - video peak rate
+   IN[4] - system mux rate
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_VIDEO_RATE			(CPU_CMD_MASK_CAPTURE | 0x0005)
+
+/* Description: Set video output resolution
+   IN[0] - task handle
+   IN[1] - horizontal size
+   IN[2] - vertical size
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_VIDEO_RESOLUTION		(CPU_CMD_MASK_CAPTURE | 0x0006)
+
+/* Description: This command set filter parameters
+   IN[0] - Task handle. Handle of the task
+   IN[1] - type, 0 - temporal, 1 - spatial, 2 - median
+   IN[2] - mode,  temporal/spatial: 0 - disable, 1 - static, 2 - dynamic
+			median:	0 = disable, 1 = horizontal, 2 = vertical,
+				3 = horizontal/vertical, 4 = diagonal
+   IN[3] - strength, temporal 0 - 31, spatial 0 - 15
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_FILTER_PARAM		(CPU_CMD_MASK_CAPTURE | 0x0009)
+
+/* Description: This command set spatial filter type
+   IN[0] - Task handle.
+   IN[1] - luma type: 0 = disable, 1 = 1D horizontal only, 2 = 1D vertical only,
+		      3 = 2D H/V separable, 4 = 2D symmetric non-separable
+   IN[2] - chroma type: 0 - disable, 1 = 1D horizontal
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_SPATIAL_FILTER_TYPE	(CPU_CMD_MASK_CAPTURE | 0x000C)
+
+/* Description: This command set coring levels for median filter
+   IN[0] - Task handle.
+   IN[1] - luma_high
+   IN[2] - luma_low
+   IN[3] - chroma_high
+   IN[4] - chroma_low
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_MEDIAN_CORING		(CPU_CMD_MASK_CAPTURE | 0x000E)
+
+/* Description: This command set the picture type mask for index file
+   IN[0] - Task handle (ignored by firmware)
+   IN[1] -	0 = disable index file output
+			1 = output I picture
+			2 = P picture
+			4 = B picture
+			other = illegal */
+#define CX18_CPU_SET_INDEXTABLE			(CPU_CMD_MASK_CAPTURE | 0x0010)
+
+/* Description: Set audio parameters
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - audio parameter
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_AUDIO_PARAMETERS		(CPU_CMD_MASK_CAPTURE | 0x0011)
+
+/* Description: Set video mute
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - bit31-24: muteYvalue
+	   bit23-16: muteUvalue
+	   bit15-8:  muteVvalue
+	   bit0:     1:mute, 0: unmute
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_VIDEO_MUTE			(CPU_CMD_MASK_CAPTURE | 0x0013)
+
+/* Description: Set audio mute
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - mute/unmute
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_AUDIO_MUTE			(CPU_CMD_MASK_CAPTURE | 0x0014)
+
+/* Description: Set stream output type
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - subType
+	    SET_INITIAL_SCR			1
+	    SET_QUALITY_MODE            2
+	    SET_VIM_PROTECT_MODE        3
+	    SET_PTS_CORRECTION          4
+	    SET_USB_FLUSH_MODE          5
+	    SET_MERAQPAR_ENABLE         6
+	    SET_NAV_PACK_INSERTION      7
+	    SET_SCENE_CHANGE_ENABLE     8
+   IN[2] - parameter 1
+   IN[3] - parameter 2
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_MISC_PARAMETERS		(CPU_CMD_MASK_CAPTURE | 0x0015)
+
+/* Description: Set raw VBI parameters
+   IN[0] - Task handle
+   IN[1] - No. of input lines per field:
+				bit[15:0]: field 1,
+				bit[31:16]: field 2
+   IN[2] - No. of input bytes per line
+   IN[3] - No. of output frames per transfer
+   IN[4] - start code
+   IN[5] - stop code
+   ReturnCode */
+#define CX18_CPU_SET_RAW_VBI_PARAM		(CPU_CMD_MASK_CAPTURE | 0x0016)
+
+/* Description: Set capture line No.
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - height1
+   IN[2] - height2
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_CAPTURE_LINE_NO		(CPU_CMD_MASK_CAPTURE | 0x0017)
+
+/* Description: Set copyright
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - copyright
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_COPYRIGHT			(CPU_CMD_MASK_CAPTURE | 0x0018)
+
+/* Description: Set audio PID
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - PID
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_AUDIO_PID			(CPU_CMD_MASK_CAPTURE | 0x0019)
+
+/* Description: Set video PID
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - PID
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_VIDEO_PID			(CPU_CMD_MASK_CAPTURE | 0x001A)
+
+/* Description: Set Vertical Crop Line
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - Line
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_VER_CROP_LINE		(CPU_CMD_MASK_CAPTURE | 0x001B)
+
+/* Description: Set COP structure
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - M
+   IN[2] - N
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_GOP_STRUCTURE		(CPU_CMD_MASK_CAPTURE | 0x001C)
+
+/* Description: Set Scene Change Detection
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - scene change
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_SCENE_CHANGE_DETECTION	(CPU_CMD_MASK_CAPTURE | 0x001D)
+
+/* Description: Set Aspect Ratio
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - AspectRatio
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_ASPECT_RATIO		(CPU_CMD_MASK_CAPTURE | 0x001E)
+
+/* Description: Set Skip Input Frame
+   IN[0] - task handle. Handle of the task to start
+   IN[1] - skip input frames
+   ReturnCode - One of the ERR_CAPTURE_... */
+#define CX18_CPU_SET_SKIP_INPUT_FRAME		(CPU_CMD_MASK_CAPTURE | 0x001F)
+
+/* Description: Set sliced VBI parameters -
+   Note This API will only apply to MPEG and Sliced VBI Channels
+   IN[0] - Task handle
+   IN[1] - output type, 0 - CC, 1 - Moji, 2 - Teletext
+   IN[2] - start / stop line
+			bit[15:0] start line number
+			bit[31:16] stop line number
+   IN[3] - number of output frames per interrupt
+   IN[4] - VBI insertion mode
+			bit 0:	output user data, 1 - enable
+			bit 1:	output private stream, 1 - enable
+			bit 2:	mux option, 0 - in GOP, 1 - in picture
+			bit[7:0]	private stream ID
+   IN[5] - insertion period while mux option is in picture
+   ReturnCode - VBI data offset */
+#define CX18_CPU_SET_SLICED_VBI_PARAM		(CPU_CMD_MASK_CAPTURE | 0x0020)
+
+/* Description: Set the user data place holder
+   IN[0] - type of data (0 for user)
+   IN[1] - Stuffing period
+   IN[2] - ID data size in word (less than 10)
+   IN[3] - Pointer to ID buffer */
+#define CX18_CPU_SET_USERDATA_PLACE_HOLDER	(CPU_CMD_MASK_CAPTURE | 0x0021)
+
+
+/* Description:
+   In[0] Task Handle
+   return parameter:
+   Out[0]  Reserved
+   Out[1]  Video PTS bit[32:2] of last output video frame.
+   Out[2]  Video PTS bit[ 1:0] of last output video frame.
+   Out[3]  Hardware Video PTS counter bit[31:0],
+	     these bits get incremented on every 90kHz clock tick.
+   Out[4]  Hardware Video PTS counter bit32,
+	     these bits get incremented on every 90kHz clock tick.
+   ReturnCode */
+#define CX18_CPU_GET_ENC_PTS			(CPU_CMD_MASK_CAPTURE | 0x0022)
+
+/* Description: Set VFC parameters
+   IN[0] - task handle
+   IN[1] - VFC enable flag, 1 - enable, 0 - disable
+*/
+#define CX18_CPU_SET_VFC_PARAM                  (CPU_CMD_MASK_CAPTURE | 0x0023)
+
+/* Below is the list of commands related to the data exchange */
+#define CPU_CMD_MASK_DE				(CPU_CMD_MASK | 0x040000)
+
+/* Description: This command provides the physical base address of the local
+   DDR as viewed by EPU
+   IN[0] - Physical offset where EPU has the local DDR mapped
+   ReturnCode - One of the ERR_DE_... */
+#define CPU_CMD_DE_SetBase			(CPU_CMD_MASK_DE | 0x0001)
+
+/* Description: This command provides the offsets in the device memory where
+   the 2 cx18_mdl_ack blocks reside
+   IN[0] - Task handle. Handle of the task to start
+   IN[1] - Offset of the first cx18_mdl_ack from the beginning of the
+	   local DDR.
+   IN[2] - Offset of the second cx18_mdl_ack from the beginning of the
+	   local DDR.
+   ReturnCode - One of the ERR_DE_... */
+#define CX18_CPU_DE_SET_MDL_ACK			(CPU_CMD_MASK_DE | 0x0002)
+
+/* Description: This command provides the offset to a Memory Descriptor List
+   IN[0] - Task handle. Handle of the task to start
+   IN[1] - Offset of the MDL from the beginning of the local DDR.
+   IN[2] - Number of cx18_mdl_ent structures in the array pointed to by IN[1]
+   IN[3] - Buffer ID
+   IN[4] - Total buffer length
+   ReturnCode - One of the ERR_DE_... */
+#define CX18_CPU_DE_SET_MDL			(CPU_CMD_MASK_DE | 0x0005)
+
+/* Description: This command requests return of all current Memory
+   Descriptor Lists to the driver
+   IN[0] - Task handle. Handle of the task to start
+   ReturnCode - One of the ERR_DE_... */
+#define CX18_CPU_DE_RELEASE_MDL			(CPU_CMD_MASK_DE | 0x0006)
+
+/* Description: This command signals the cpu that the dat buffer has been
+   consumed and ready for re-use.
+   IN[0] - Task handle. Handle of the task
+   IN[1] - Offset of the data block from the beginning of the local DDR.
+   IN[2] - Number of bytes in the data block
+   ReturnCode - One of the ERR_DE_... */
+/* #define CX18_CPU_DE_RELEASE_BUFFER           (CPU_CMD_MASK_DE | 0x0007) */
+
+/* No Error / Success */
+#define CNXT_OK                 0x000000
+
+/* Received unknown command */
+#define CXERR_UNK_CMD           0x000001
+
+/* First parameter in the command is invalid */
+#define CXERR_INVALID_PARAM1    0x000002
+
+/* Second parameter in the command is invalid */
+#define CXERR_INVALID_PARAM2    0x000003
+
+/* Device interface is not open/found */
+#define CXERR_DEV_NOT_FOUND     0x000004
+
+/* Requested function is not implemented/available */
+#define CXERR_NOTSUPPORTED      0x000005
+
+/* Invalid pointer is provided */
+#define CXERR_BADPTR            0x000006
+
+/* Unable to allocate memory */
+#define CXERR_NOMEM             0x000007
+
+/* Object/Link not found */
+#define CXERR_LINK              0x000008
+
+/* Device busy, command cannot be executed */
+#define CXERR_BUSY              0x000009
+
+/* File/device/handle is not open. */
+#define CXERR_NOT_OPEN          0x00000A
+
+/* Value is out of range */
+#define CXERR_OUTOFRANGE        0x00000B
+
+/* Buffer overflow */
+#define CXERR_OVERFLOW          0x00000C
+
+/* Version mismatch */
+#define CXERR_BADVER            0x00000D
+
+/* Operation timed out */
+#define CXERR_TIMEOUT           0x00000E
+
+/* Operation aborted */
+#define CXERR_ABORT             0x00000F
+
+/* Specified I2C device not found for read/write */
+#define CXERR_I2CDEV_NOTFOUND   0x000010
+
+/* Error in I2C data xfer (but I2C device is present) */
+#define CXERR_I2CDEV_XFERERR    0x000011
+
+/* Chanel changing component not ready */
+#define CXERR_CHANNELNOTREADY   0x000012
+
+/* PPU (Presensation/Decoder) mail box is corrupted */
+#define CXERR_PPU_MB_CORRUPT    0x000013
+
+/* CPU (Capture/Encoder) mail box is corrupted */
+#define CXERR_CPU_MB_CORRUPT    0x000014
+
+/* APU (Audio) mail box is corrupted */
+#define CXERR_APU_MB_CORRUPT    0x000015
+
+/* Unable to open file for reading */
+#define CXERR_FILE_OPEN_READ    0x000016
+
+/* Unable to open file for writing */
+#define CXERR_FILE_OPEN_WRITE   0x000017
+
+/* Unable to find the I2C section specified */
+#define CXERR_I2C_BADSECTION    0x000018
+
+/* Error in I2C data xfer (but I2C device is present) */
+#define CXERR_I2CDEV_DATALOW    0x000019
+
+/* Error in I2C data xfer (but I2C device is present) */
+#define CXERR_I2CDEV_CLOCKLOW   0x00001A
+
+/* No Interrupt received from HW (for I2C access) */
+#define CXERR_NO_HW_I2C_INTR    0x00001B
+
+/* RPU is not ready to accept commands! */
+#define CXERR_RPU_NOT_READY     0x00001C
+
+/* RPU is not ready to accept commands! */
+#define CXERR_RPU_NO_ACK        0x00001D
+
+/* The are no buffers ready. Try again soon! */
+#define CXERR_NODATA_AGAIN      0x00001E
+
+/* The stream is stopping. Function not allowed now! */
+#define CXERR_STOPPING_STATUS   0x00001F
+
+/* Trying to access hardware when the power is turned OFF */
+#define CXERR_DEVPOWER_OFF      0x000020
+
+#endif /* CX23418_H */