Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2049 insertions, 0 deletions

diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c
new file mode 100644
index 000000000..3e111f7f5
--- /dev/null
+++ b/drivers/media/usb/au0828/au0828-video.c
@@ -0,0 +1,2049 @@
+/*
+ * Auvitek AU0828 USB Bridge (Analog video support)
+ *
+ * Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org>
+ * Copyright (C) 2005-2008 Auvitek International, Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * As published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* Developer Notes:
+ *
+ * The hardware scaler supported is unimplemented
+ * AC97 audio support is unimplemented (only i2s audio mode)
+ *
+ */
+
+#include "au0828.h"
+#include "au8522.h"
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-event.h>
+#include <media/tuner.h>
+#include "au0828-reg.h"
+
+static DEFINE_MUTEX(au0828_sysfs_lock);
+
+/* ------------------------------------------------------------------
+	Videobuf operations
+   ------------------------------------------------------------------*/
+
+static unsigned int isoc_debug;
+module_param(isoc_debug, int, 0644);
+MODULE_PARM_DESC(isoc_debug, "enable debug messages [isoc transfers]");
+
+#define au0828_isocdbg(fmt, arg...) \
+do {\
+	if (isoc_debug) { \
+		pr_info("au0828 %s :"fmt, \
+		       __func__ , ##arg);	   \
+	} \
+  } while (0)
+
+static inline void i2c_gate_ctrl(struct au0828_dev *dev, int val)
+{
+	if (dev->dvb.frontend && dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl)
+		dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl(dev->dvb.frontend, val);
+}
+
+static inline void print_err_status(struct au0828_dev *dev,
+				    int packet, int status)
+{
+	char *errmsg = "Unknown";
+
+	switch (status) {
+	case -ENOENT:
+		errmsg = "unlinked synchronously";
+		break;
+	case -ECONNRESET:
+		errmsg = "unlinked asynchronously";
+		break;
+	case -ENOSR:
+		errmsg = "Buffer error (overrun)";
+		break;
+	case -EPIPE:
+		errmsg = "Stalled (device not responding)";
+		break;
+	case -EOVERFLOW:
+		errmsg = "Babble (bad cable?)";
+		break;
+	case -EPROTO:
+		errmsg = "Bit-stuff error (bad cable?)";
+		break;
+	case -EILSEQ:
+		errmsg = "CRC/Timeout (could be anything)";
+		break;
+	case -ETIME:
+		errmsg = "Device does not respond";
+		break;
+	}
+	if (packet < 0) {
+		au0828_isocdbg("URB status %d [%s].\n",	status, errmsg);
+	} else {
+		au0828_isocdbg("URB packet %d, status %d [%s].\n",
+			       packet, status, errmsg);
+	}
+}
+
+static int check_dev(struct au0828_dev *dev)
+{
+	if (test_bit(DEV_DISCONNECTED, &dev->dev_state)) {
+		pr_info("v4l2 ioctl: device not present\n");
+		return -ENODEV;
+	}
+
+	if (test_bit(DEV_MISCONFIGURED, &dev->dev_state)) {
+		pr_info("v4l2 ioctl: device is misconfigured; close and open it again\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+/*
+ * IRQ callback, called by URB callback
+ */
+static void au0828_irq_callback(struct urb *urb)
+{
+	struct au0828_dmaqueue  *dma_q = urb->context;
+	struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq);
+	unsigned long flags = 0;
+	int i;
+
+	switch (urb->status) {
+	case 0:             /* success */
+	case -ETIMEDOUT:    /* NAK */
+		break;
+	case -ECONNRESET:   /* kill */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		au0828_isocdbg("au0828_irq_callback called: status kill\n");
+		return;
+	default:            /* unknown error */
+		au0828_isocdbg("urb completion error %d.\n", urb->status);
+		break;
+	}
+
+	/* Copy data from URB */
+	spin_lock_irqsave(&dev->slock, flags);
+	dev->isoc_ctl.isoc_copy(dev, urb);
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	/* Reset urb buffers */
+	for (i = 0; i < urb->number_of_packets; i++) {
+		urb->iso_frame_desc[i].status = 0;
+		urb->iso_frame_desc[i].actual_length = 0;
+	}
+	urb->status = 0;
+
+	urb->status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (urb->status) {
+		au0828_isocdbg("urb resubmit failed (error=%i)\n",
+			       urb->status);
+	}
+	dev->stream_state = STREAM_ON;
+}
+
+/*
+ * Stop and Deallocate URBs
+ */
+static void au0828_uninit_isoc(struct au0828_dev *dev)
+{
+	struct urb *urb;
+	int i;
+
+	au0828_isocdbg("au0828: called au0828_uninit_isoc\n");
+
+	dev->isoc_ctl.nfields = -1;
+	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+		urb = dev->isoc_ctl.urb[i];
+		if (urb) {
+			if (!irqs_disabled())
+				usb_kill_urb(urb);
+			else
+				usb_unlink_urb(urb);
+
+			if (dev->isoc_ctl.transfer_buffer[i]) {
+				usb_free_coherent(dev->usbdev,
+					urb->transfer_buffer_length,
+					dev->isoc_ctl.transfer_buffer[i],
+					urb->transfer_dma);
+			}
+			usb_free_urb(urb);
+			dev->isoc_ctl.urb[i] = NULL;
+		}
+		dev->isoc_ctl.transfer_buffer[i] = NULL;
+	}
+
+	kfree(dev->isoc_ctl.urb);
+	kfree(dev->isoc_ctl.transfer_buffer);
+
+	dev->isoc_ctl.urb = NULL;
+	dev->isoc_ctl.transfer_buffer = NULL;
+	dev->isoc_ctl.num_bufs = 0;
+
+	dev->stream_state = STREAM_OFF;
+}
+
+/*
+ * Allocate URBs and start IRQ
+ */
+static int au0828_init_isoc(struct au0828_dev *dev, int max_packets,
+			    int num_bufs, int max_pkt_size,
+			    int (*isoc_copy) (struct au0828_dev *dev, struct urb *urb))
+{
+	struct au0828_dmaqueue *dma_q = &dev->vidq;
+	int i;
+	int sb_size, pipe;
+	struct urb *urb;
+	int j, k;
+	int rc;
+
+	au0828_isocdbg("au0828: called au0828_prepare_isoc\n");
+
+	dev->isoc_ctl.isoc_copy = isoc_copy;
+	dev->isoc_ctl.num_bufs = num_bufs;
+
+	dev->isoc_ctl.urb = kcalloc(num_bufs, sizeof(void *),  GFP_KERNEL);
+	if (!dev->isoc_ctl.urb) {
+		au0828_isocdbg("cannot alloc memory for usb buffers\n");
+		return -ENOMEM;
+	}
+
+	dev->isoc_ctl.transfer_buffer = kcalloc(num_bufs, sizeof(void *),
+						GFP_KERNEL);
+	if (!dev->isoc_ctl.transfer_buffer) {
+		au0828_isocdbg("cannot allocate memory for usb transfer\n");
+		kfree(dev->isoc_ctl.urb);
+		return -ENOMEM;
+	}
+
+	dev->isoc_ctl.max_pkt_size = max_pkt_size;
+	dev->isoc_ctl.buf = NULL;
+
+	sb_size = max_packets * dev->isoc_ctl.max_pkt_size;
+
+	/* allocate urbs and transfer buffers */
+	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+		urb = usb_alloc_urb(max_packets, GFP_KERNEL);
+		if (!urb) {
+			au0828_uninit_isoc(dev);
+			return -ENOMEM;
+		}
+		dev->isoc_ctl.urb[i] = urb;
+
+		dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->usbdev,
+			sb_size, GFP_KERNEL, &urb->transfer_dma);
+		if (!dev->isoc_ctl.transfer_buffer[i]) {
+			printk("unable to allocate %i bytes for transfer buffer %i%s\n",
+					sb_size, i,
+					in_interrupt() ? " while in int" : "");
+			au0828_uninit_isoc(dev);
+			return -ENOMEM;
+		}
+		memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size);
+
+		pipe = usb_rcvisocpipe(dev->usbdev,
+				       dev->isoc_in_endpointaddr),
+
+		usb_fill_int_urb(urb, dev->usbdev, pipe,
+				 dev->isoc_ctl.transfer_buffer[i], sb_size,
+				 au0828_irq_callback, dma_q, 1);
+
+		urb->number_of_packets = max_packets;
+		urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+
+		k = 0;
+		for (j = 0; j < max_packets; j++) {
+			urb->iso_frame_desc[j].offset = k;
+			urb->iso_frame_desc[j].length =
+						dev->isoc_ctl.max_pkt_size;
+			k += dev->isoc_ctl.max_pkt_size;
+		}
+	}
+
+	/* submit urbs and enables IRQ */
+	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+		rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC);
+		if (rc) {
+			au0828_isocdbg("submit of urb %i failed (error=%i)\n",
+				       i, rc);
+			au0828_uninit_isoc(dev);
+			return rc;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Announces that a buffer were filled and request the next
+ */
+static inline void buffer_filled(struct au0828_dev *dev,
+				 struct au0828_dmaqueue *dma_q,
+				 struct au0828_buffer *buf)
+{
+	struct vb2_v4l2_buffer *vb = &buf->vb;
+	struct vb2_queue *q = vb->vb2_buf.vb2_queue;
+
+	/* Advice that buffer was filled */
+	au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->top_field);
+
+	if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		vb->sequence = dev->frame_count++;
+	else
+		vb->sequence = dev->vbi_frame_count++;
+
+	vb->field = V4L2_FIELD_INTERLACED;
+	vb->vb2_buf.timestamp = ktime_get_ns();
+	vb2_buffer_done(&vb->vb2_buf, VB2_BUF_STATE_DONE);
+}
+
+/*
+ * Identify the buffer header type and properly handles
+ */
+static void au0828_copy_video(struct au0828_dev *dev,
+			      struct au0828_dmaqueue  *dma_q,
+			      struct au0828_buffer *buf,
+			      unsigned char *p,
+			      unsigned char *outp, unsigned long len)
+{
+	void *fieldstart, *startwrite, *startread;
+	int  linesdone, currlinedone, offset, lencopy, remain;
+	int bytesperline = dev->width << 1; /* Assumes 16-bit depth @@@@ */
+
+	if (len == 0)
+		return;
+
+	if (dma_q->pos + len > buf->length)
+		len = buf->length - dma_q->pos;
+
+	startread = p;
+	remain = len;
+
+	/* Interlaces frame */
+	if (buf->top_field)
+		fieldstart = outp;
+	else
+		fieldstart = outp + bytesperline;
+
+	linesdone = dma_q->pos / bytesperline;
+	currlinedone = dma_q->pos % bytesperline;
+	offset = linesdone * bytesperline * 2 + currlinedone;
+	startwrite = fieldstart + offset;
+	lencopy = bytesperline - currlinedone;
+	lencopy = lencopy > remain ? remain : lencopy;
+
+	if ((char *)startwrite + lencopy > (char *)outp + buf->length) {
+		au0828_isocdbg("Overflow of %zi bytes past buffer end (1)\n",
+			       ((char *)startwrite + lencopy) -
+			       ((char *)outp + buf->length));
+		remain = (char *)outp + buf->length - (char *)startwrite;
+		lencopy = remain;
+	}
+	if (lencopy <= 0)
+		return;
+	memcpy(startwrite, startread, lencopy);
+
+	remain -= lencopy;
+
+	while (remain > 0) {
+		startwrite += lencopy + bytesperline;
+		startread += lencopy;
+		if (bytesperline > remain)
+			lencopy = remain;
+		else
+			lencopy = bytesperline;
+
+		if ((char *)startwrite + lencopy > (char *)outp +
+		    buf->length) {
+			au0828_isocdbg("Overflow %zi bytes past buf end (2)\n",
+				       ((char *)startwrite + lencopy) -
+				       ((char *)outp + buf->length));
+			lencopy = remain = (char *)outp + buf->length -
+					   (char *)startwrite;
+		}
+		if (lencopy <= 0)
+			break;
+
+		memcpy(startwrite, startread, lencopy);
+
+		remain -= lencopy;
+	}
+
+	if (offset > 1440) {
+		/* We have enough data to check for greenscreen */
+		if (outp[0] < 0x60 && outp[1440] < 0x60)
+			dev->greenscreen_detected = 1;
+	}
+
+	dma_q->pos += len;
+}
+
+/*
+ * video-buf generic routine to get the next available buffer
+ */
+static inline void get_next_buf(struct au0828_dmaqueue *dma_q,
+				struct au0828_buffer **buf)
+{
+	struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq);
+
+	if (list_empty(&dma_q->active)) {
+		au0828_isocdbg("No active queue to serve\n");
+		dev->isoc_ctl.buf = NULL;
+		*buf = NULL;
+		return;
+	}
+
+	/* Get the next buffer */
+	*buf = list_entry(dma_q->active.next, struct au0828_buffer, list);
+	/* Cleans up buffer - Useful for testing for frame/URB loss */
+	list_del(&(*buf)->list);
+	dma_q->pos = 0;
+	(*buf)->vb_buf = (*buf)->mem;
+	dev->isoc_ctl.buf = *buf;
+
+	return;
+}
+
+static void au0828_copy_vbi(struct au0828_dev *dev,
+			      struct au0828_dmaqueue  *dma_q,
+			      struct au0828_buffer *buf,
+			      unsigned char *p,
+			      unsigned char *outp, unsigned long len)
+{
+	unsigned char *startwrite, *startread;
+	int bytesperline;
+	int i, j = 0;
+
+	if (dev == NULL) {
+		au0828_isocdbg("dev is null\n");
+		return;
+	}
+
+	if (dma_q == NULL) {
+		au0828_isocdbg("dma_q is null\n");
+		return;
+	}
+	if (buf == NULL)
+		return;
+	if (p == NULL) {
+		au0828_isocdbg("p is null\n");
+		return;
+	}
+	if (outp == NULL) {
+		au0828_isocdbg("outp is null\n");
+		return;
+	}
+
+	bytesperline = dev->vbi_width;
+
+	if (dma_q->pos + len > buf->length)
+		len = buf->length - dma_q->pos;
+
+	startread = p;
+	startwrite = outp + (dma_q->pos / 2);
+
+	/* Make sure the bottom field populates the second half of the frame */
+	if (buf->top_field == 0)
+		startwrite += bytesperline * dev->vbi_height;
+
+	for (i = 0; i < len; i += 2)
+		startwrite[j++] = startread[i+1];
+
+	dma_q->pos += len;
+}
+
+
+/*
+ * video-buf generic routine to get the next available VBI buffer
+ */
+static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q,
+				    struct au0828_buffer **buf)
+{
+	struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vbiq);
+
+	if (list_empty(&dma_q->active)) {
+		au0828_isocdbg("No active queue to serve\n");
+		dev->isoc_ctl.vbi_buf = NULL;
+		*buf = NULL;
+		return;
+	}
+
+	/* Get the next buffer */
+	*buf = list_entry(dma_q->active.next, struct au0828_buffer, list);
+	/* Cleans up buffer - Useful for testing for frame/URB loss */
+	list_del(&(*buf)->list);
+	dma_q->pos = 0;
+	(*buf)->vb_buf = (*buf)->mem;
+	dev->isoc_ctl.vbi_buf = *buf;
+	return;
+}
+
+/*
+ * Controls the isoc copy of each urb packet
+ */
+static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
+{
+	struct au0828_buffer    *buf;
+	struct au0828_buffer    *vbi_buf;
+	struct au0828_dmaqueue  *dma_q = urb->context;
+	struct au0828_dmaqueue  *vbi_dma_q = &dev->vbiq;
+	unsigned char *outp = NULL;
+	unsigned char *vbioutp = NULL;
+	int i, len = 0, rc = 1;
+	unsigned char *p;
+	unsigned char fbyte;
+	unsigned int vbi_field_size;
+	unsigned int remain, lencopy;
+
+	if (!dev)
+		return 0;
+
+	if (test_bit(DEV_DISCONNECTED, &dev->dev_state) ||
+	    test_bit(DEV_MISCONFIGURED, &dev->dev_state))
+		return 0;
+
+	if (urb->status < 0) {
+		print_err_status(dev, -1, urb->status);
+		if (urb->status == -ENOENT)
+			return 0;
+	}
+
+	buf = dev->isoc_ctl.buf;
+	if (buf != NULL)
+		outp = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+
+	vbi_buf = dev->isoc_ctl.vbi_buf;
+	if (vbi_buf != NULL)
+		vbioutp = vb2_plane_vaddr(&vbi_buf->vb.vb2_buf, 0);
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		int status = urb->iso_frame_desc[i].status;
+
+		if (status < 0) {
+			print_err_status(dev, i, status);
+			if (urb->iso_frame_desc[i].status != -EPROTO)
+				continue;
+		}
+
+		if (urb->iso_frame_desc[i].actual_length <= 0)
+			continue;
+
+		if (urb->iso_frame_desc[i].actual_length >
+						dev->max_pkt_size) {
+			au0828_isocdbg("packet bigger than packet size");
+			continue;
+		}
+
+		p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+		fbyte = p[0];
+		len = urb->iso_frame_desc[i].actual_length - 4;
+		p += 4;
+
+		if (fbyte & 0x80) {
+			len -= 4;
+			p += 4;
+			au0828_isocdbg("Video frame %s\n",
+				       (fbyte & 0x40) ? "odd" : "even");
+			if (fbyte & 0x40) {
+				/* VBI */
+				if (vbi_buf != NULL)
+					buffer_filled(dev, vbi_dma_q, vbi_buf);
+				vbi_get_next_buf(vbi_dma_q, &vbi_buf);
+				if (vbi_buf == NULL)
+					vbioutp = NULL;
+				else
+					vbioutp = vb2_plane_vaddr(
+						&vbi_buf->vb.vb2_buf, 0);
+
+				/* Video */
+				if (buf != NULL)
+					buffer_filled(dev, dma_q, buf);
+				get_next_buf(dma_q, &buf);
+				if (buf == NULL)
+					outp = NULL;
+				else
+					outp = vb2_plane_vaddr(
+						&buf->vb.vb2_buf, 0);
+
+				/* As long as isoc traffic is arriving, keep
+				   resetting the timer */
+				if (dev->vid_timeout_running)
+					mod_timer(&dev->vid_timeout,
+						  jiffies + (HZ / 10));
+				if (dev->vbi_timeout_running)
+					mod_timer(&dev->vbi_timeout,
+						  jiffies + (HZ / 10));
+			}
+
+			if (buf != NULL) {
+				if (fbyte & 0x40)
+					buf->top_field = 1;
+				else
+					buf->top_field = 0;
+			}
+
+			if (vbi_buf != NULL) {
+				if (fbyte & 0x40)
+					vbi_buf->top_field = 1;
+				else
+					vbi_buf->top_field = 0;
+			}
+
+			dev->vbi_read = 0;
+			vbi_dma_q->pos = 0;
+			dma_q->pos = 0;
+		}
+
+		vbi_field_size = dev->vbi_width * dev->vbi_height * 2;
+		if (dev->vbi_read < vbi_field_size) {
+			remain  = vbi_field_size - dev->vbi_read;
+			if (len < remain)
+				lencopy = len;
+			else
+				lencopy = remain;
+
+			if (vbi_buf != NULL)
+				au0828_copy_vbi(dev, vbi_dma_q, vbi_buf, p,
+						vbioutp, len);
+
+			len -= lencopy;
+			p += lencopy;
+			dev->vbi_read += lencopy;
+		}
+
+		if (dev->vbi_read >= vbi_field_size && buf != NULL)
+			au0828_copy_video(dev, dma_q, buf, p, outp, len);
+	}
+	return rc;
+}
+
+void au0828_usb_v4l2_media_release(struct au0828_dev *dev)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+	int i;
+
+	for (i = 0; i < AU0828_MAX_INPUT; i++) {
+		if (AUVI_INPUT(i).type == AU0828_VMUX_UNDEFINED)
+			return;
+		media_device_unregister_entity(&dev->input_ent[i]);
+	}
+#endif
+}
+
+static void au0828_usb_v4l2_release(struct v4l2_device *v4l2_dev)
+{
+	struct au0828_dev *dev =
+		container_of(v4l2_dev, struct au0828_dev, v4l2_dev);
+
+	v4l2_ctrl_handler_free(&dev->v4l2_ctrl_hdl);
+	v4l2_device_unregister(&dev->v4l2_dev);
+	au0828_usb_v4l2_media_release(dev);
+	au0828_usb_release(dev);
+}
+
+int au0828_v4l2_device_register(struct usb_interface *interface,
+				struct au0828_dev *dev)
+{
+	int retval;
+
+	if (AUVI_INPUT(0).type == AU0828_VMUX_UNDEFINED)
+		return 0;
+
+	/* Create the v4l2_device */
+#ifdef CONFIG_MEDIA_CONTROLLER
+	dev->v4l2_dev.mdev = dev->media_dev;
+#endif
+	retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
+	if (retval) {
+		pr_err("%s() v4l2_device_register failed\n",
+		       __func__);
+		return retval;
+	}
+
+	dev->v4l2_dev.release = au0828_usb_v4l2_release;
+
+	/* This control handler will inherit the controls from au8522 */
+	retval = v4l2_ctrl_handler_init(&dev->v4l2_ctrl_hdl, 4);
+	if (retval) {
+		pr_err("%s() v4l2_ctrl_handler_init failed\n",
+		       __func__);
+		return retval;
+	}
+	dev->v4l2_dev.ctrl_handler = &dev->v4l2_ctrl_hdl;
+
+	return 0;
+}
+
+static int queue_setup(struct vb2_queue *vq,
+		       unsigned int *nbuffers, unsigned int *nplanes,
+		       unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct au0828_dev *dev = vb2_get_drv_priv(vq);
+	unsigned long size = dev->height * dev->bytesperline;
+
+	if (*nplanes)
+		return sizes[0] < size ? -EINVAL : 0;
+	*nplanes = 1;
+	sizes[0] = size;
+	return 0;
+}
+
+static int
+buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct au0828_buffer *buf = container_of(vbuf,
+				struct au0828_buffer, vb);
+	struct au0828_dev    *dev = vb2_get_drv_priv(vb->vb2_queue);
+
+	buf->length = dev->height * dev->bytesperline;
+
+	if (vb2_plane_size(vb, 0) < buf->length) {
+		pr_err("%s data will not fit into plane (%lu < %lu)\n",
+			__func__, vb2_plane_size(vb, 0), buf->length);
+		return -EINVAL;
+	}
+	vb2_set_plane_payload(&buf->vb.vb2_buf, 0, buf->length);
+	return 0;
+}
+
+static void
+buffer_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct au0828_buffer    *buf     = container_of(vbuf,
+							struct au0828_buffer,
+							vb);
+	struct au0828_dev       *dev     = vb2_get_drv_priv(vb->vb2_queue);
+	struct au0828_dmaqueue  *vidq    = &dev->vidq;
+	unsigned long flags = 0;
+
+	buf->mem = vb2_plane_vaddr(vb, 0);
+	buf->length = vb2_plane_size(vb, 0);
+
+	spin_lock_irqsave(&dev->slock, flags);
+	list_add_tail(&buf->list, &vidq->active);
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static int au0828_i2s_init(struct au0828_dev *dev)
+{
+	/* Enable i2s mode */
+	au0828_writereg(dev, AU0828_AUDIOCTRL_50C, 0x01);
+	return 0;
+}
+
+/*
+ * Auvitek au0828 analog stream enable
+ */
+static int au0828_analog_stream_enable(struct au0828_dev *d)
+{
+	struct usb_interface *iface;
+	int ret, h, w;
+
+	dprintk(1, "au0828_analog_stream_enable called\n");
+
+	if (test_bit(DEV_DISCONNECTED, &d->dev_state))
+		return -ENODEV;
+
+	iface = usb_ifnum_to_if(d->usbdev, 0);
+	if (iface && iface->cur_altsetting->desc.bAlternateSetting != 5) {
+		dprintk(1, "Changing intf#0 to alt 5\n");
+		/* set au0828 interface0 to AS5 here again */
+		ret = usb_set_interface(d->usbdev, 0, 5);
+		if (ret < 0) {
+			pr_info("Au0828 can't set alt setting to 5!\n");
+			return -EBUSY;
+		}
+	}
+
+	h = d->height / 2 + 2;
+	w = d->width * 2;
+
+	au0828_writereg(d, AU0828_SENSORCTRL_VBI_103, 0x00);
+	au0828_writereg(d, 0x106, 0x00);
+	/* set x position */
+	au0828_writereg(d, 0x110, 0x00);
+	au0828_writereg(d, 0x111, 0x00);
+	au0828_writereg(d, 0x114, w & 0xff);
+	au0828_writereg(d, 0x115, w >> 8);
+	/* set y position */
+	au0828_writereg(d, 0x112, 0x00);
+	au0828_writereg(d, 0x113, 0x00);
+	au0828_writereg(d, 0x116, h & 0xff);
+	au0828_writereg(d, 0x117, h >> 8);
+	au0828_writereg(d, AU0828_SENSORCTRL_100, 0xb3);
+
+	return 0;
+}
+
+static int au0828_analog_stream_disable(struct au0828_dev *d)
+{
+	dprintk(1, "au0828_analog_stream_disable called\n");
+	au0828_writereg(d, AU0828_SENSORCTRL_100, 0x0);
+	return 0;
+}
+
+static void au0828_analog_stream_reset(struct au0828_dev *dev)
+{
+	dprintk(1, "au0828_analog_stream_reset called\n");
+	au0828_writereg(dev, AU0828_SENSORCTRL_100, 0x0);
+	mdelay(30);
+	au0828_writereg(dev, AU0828_SENSORCTRL_100, 0xb3);
+}
+
+/*
+ * Some operations needs to stop current streaming
+ */
+static int au0828_stream_interrupt(struct au0828_dev *dev)
+{
+	dev->stream_state = STREAM_INTERRUPT;
+	if (test_bit(DEV_DISCONNECTED, &dev->dev_state))
+		return -ENODEV;
+	return 0;
+}
+
+int au0828_start_analog_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct au0828_dev *dev = vb2_get_drv_priv(vq);
+	int rc = 0;
+
+	dprintk(1, "au0828_start_analog_streaming called %d\n",
+		dev->streaming_users);
+
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		dev->frame_count = 0;
+	else
+		dev->vbi_frame_count = 0;
+
+	if (dev->streaming_users == 0) {
+		/* If we were doing ac97 instead of i2s, it would go here...*/
+		au0828_i2s_init(dev);
+		rc = au0828_init_isoc(dev, AU0828_ISO_PACKETS_PER_URB,
+				   AU0828_MAX_ISO_BUFS, dev->max_pkt_size,
+				   au0828_isoc_copy);
+		if (rc < 0) {
+			pr_info("au0828_init_isoc failed\n");
+			return rc;
+		}
+
+		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1);
+
+		if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+			dev->vid_timeout_running = 1;
+			mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
+		} else if (vq->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+			dev->vbi_timeout_running = 1;
+			mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
+		}
+	}
+	dev->streaming_users++;
+	return rc;
+}
+
+static void au0828_stop_streaming(struct vb2_queue *vq)
+{
+	struct au0828_dev *dev = vb2_get_drv_priv(vq);
+	struct au0828_dmaqueue *vidq = &dev->vidq;
+	unsigned long flags = 0;
+
+	dprintk(1, "au0828_stop_streaming called %d\n", dev->streaming_users);
+
+	if (dev->streaming_users-- == 1) {
+		au0828_uninit_isoc(dev);
+		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
+	}
+
+	dev->vid_timeout_running = 0;
+	del_timer_sync(&dev->vid_timeout);
+
+	spin_lock_irqsave(&dev->slock, flags);
+	if (dev->isoc_ctl.buf != NULL) {
+		vb2_buffer_done(&dev->isoc_ctl.buf->vb.vb2_buf,
+				VB2_BUF_STATE_ERROR);
+		dev->isoc_ctl.buf = NULL;
+	}
+	while (!list_empty(&vidq->active)) {
+		struct au0828_buffer *buf;
+
+		buf = list_entry(vidq->active.next, struct au0828_buffer, list);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+		list_del(&buf->list);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+void au0828_stop_vbi_streaming(struct vb2_queue *vq)
+{
+	struct au0828_dev *dev = vb2_get_drv_priv(vq);
+	struct au0828_dmaqueue *vbiq = &dev->vbiq;
+	unsigned long flags = 0;
+
+	dprintk(1, "au0828_stop_vbi_streaming called %d\n",
+		dev->streaming_users);
+
+	if (dev->streaming_users-- == 1) {
+		au0828_uninit_isoc(dev);
+		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
+	}
+
+	spin_lock_irqsave(&dev->slock, flags);
+	if (dev->isoc_ctl.vbi_buf != NULL) {
+		vb2_buffer_done(&dev->isoc_ctl.vbi_buf->vb.vb2_buf,
+				VB2_BUF_STATE_ERROR);
+		dev->isoc_ctl.vbi_buf = NULL;
+	}
+	while (!list_empty(&vbiq->active)) {
+		struct au0828_buffer *buf;
+
+		buf = list_entry(vbiq->active.next, struct au0828_buffer, list);
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	dev->vbi_timeout_running = 0;
+	del_timer_sync(&dev->vbi_timeout);
+}
+
+static const struct vb2_ops au0828_video_qops = {
+	.queue_setup     = queue_setup,
+	.buf_prepare     = buffer_prepare,
+	.buf_queue       = buffer_queue,
+	.start_streaming = au0828_start_analog_streaming,
+	.stop_streaming  = au0828_stop_streaming,
+	.wait_prepare    = vb2_ops_wait_prepare,
+	.wait_finish     = vb2_ops_wait_finish,
+};
+
+/* ------------------------------------------------------------------
+   V4L2 interface
+   ------------------------------------------------------------------*/
+/*
+ * au0828_analog_unregister
+ * unregister v4l2 devices
+ */
+int au0828_analog_unregister(struct au0828_dev *dev)
+{
+	dprintk(1, "au0828_analog_unregister called\n");
+
+	/* No analog TV */
+	if (AUVI_INPUT(0).type == AU0828_VMUX_UNDEFINED)
+		return 0;
+
+	mutex_lock(&au0828_sysfs_lock);
+	video_unregister_device(&dev->vdev);
+	video_unregister_device(&dev->vbi_dev);
+	mutex_unlock(&au0828_sysfs_lock);
+
+	v4l2_device_disconnect(&dev->v4l2_dev);
+	v4l2_device_put(&dev->v4l2_dev);
+
+	return 1;
+}
+
+/* This function ensures that video frames continue to be delivered even if
+   the ITU-656 input isn't receiving any data (thereby preventing applications
+   such as tvtime from hanging) */
+static void au0828_vid_buffer_timeout(struct timer_list *t)
+{
+	struct au0828_dev *dev = from_timer(dev, t, vid_timeout);
+	struct au0828_dmaqueue *dma_q = &dev->vidq;
+	struct au0828_buffer *buf;
+	unsigned char *vid_data;
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&dev->slock, flags);
+
+	buf = dev->isoc_ctl.buf;
+	if (buf != NULL) {
+		vid_data = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+		memset(vid_data, 0x00, buf->length); /* Blank green frame */
+		buffer_filled(dev, dma_q, buf);
+	}
+	get_next_buf(dma_q, &buf);
+
+	if (dev->vid_timeout_running == 1)
+		mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
+
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static void au0828_vbi_buffer_timeout(struct timer_list *t)
+{
+	struct au0828_dev *dev = from_timer(dev, t, vbi_timeout);
+	struct au0828_dmaqueue *dma_q = &dev->vbiq;
+	struct au0828_buffer *buf;
+	unsigned char *vbi_data;
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&dev->slock, flags);
+
+	buf = dev->isoc_ctl.vbi_buf;
+	if (buf != NULL) {
+		vbi_data = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
+		memset(vbi_data, 0x00, buf->length);
+		buffer_filled(dev, dma_q, buf);
+	}
+	vbi_get_next_buf(dma_q, &buf);
+
+	if (dev->vbi_timeout_running == 1)
+		mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static int au0828_v4l2_open(struct file *filp)
+{
+	struct au0828_dev *dev = video_drvdata(filp);
+	int ret;
+
+	dprintk(1,
+		"%s called std_set %d dev_state %ld stream users %d users %d\n",
+		__func__, dev->std_set_in_tuner_core, dev->dev_state,
+		dev->streaming_users, dev->users);
+
+	if (mutex_lock_interruptible(&dev->lock))
+		return -ERESTARTSYS;
+
+	ret = v4l2_fh_open(filp);
+	if (ret) {
+		au0828_isocdbg("%s: v4l2_fh_open() returned error %d\n",
+				__func__, ret);
+		mutex_unlock(&dev->lock);
+		return ret;
+	}
+
+	if (dev->users == 0) {
+		au0828_analog_stream_enable(dev);
+		au0828_analog_stream_reset(dev);
+		dev->stream_state = STREAM_OFF;
+		set_bit(DEV_INITIALIZED, &dev->dev_state);
+	}
+	dev->users++;
+	mutex_unlock(&dev->lock);
+	return ret;
+}
+
+static int au0828_v4l2_close(struct file *filp)
+{
+	int ret;
+	struct au0828_dev *dev = video_drvdata(filp);
+	struct video_device *vdev = video_devdata(filp);
+
+	dprintk(1,
+		"%s called std_set %d dev_state %ld stream users %d users %d\n",
+		__func__, dev->std_set_in_tuner_core, dev->dev_state,
+		dev->streaming_users, dev->users);
+
+	mutex_lock(&dev->lock);
+	if (vdev->vfl_type == VFL_TYPE_GRABBER && dev->vid_timeout_running) {
+		/* Cancel timeout thread in case they didn't call streamoff */
+		dev->vid_timeout_running = 0;
+		del_timer_sync(&dev->vid_timeout);
+	} else if (vdev->vfl_type == VFL_TYPE_VBI &&
+			dev->vbi_timeout_running) {
+		/* Cancel timeout thread in case they didn't call streamoff */
+		dev->vbi_timeout_running = 0;
+		del_timer_sync(&dev->vbi_timeout);
+	}
+
+	if (test_bit(DEV_DISCONNECTED, &dev->dev_state))
+		goto end;
+
+	if (dev->users == 1) {
+		/*
+		 * Avoid putting tuner in sleep if DVB or ALSA are
+		 * streaming.
+		 *
+		 * On most USB devices  like au0828 the tuner can
+		 * be safely put in sleep stare here if ALSA isn't
+		 * streaming. Exceptions are some very old USB tuner
+		 * models such as em28xx-based WinTV USB2 which have
+		 * a separate audio output jack. The devices that have
+		 * a separate audio output jack have analog tuners,
+		 * like Philips FM1236. Those devices are always on,
+		 * so the s_power callback are silently ignored.
+		 * So, the current logic here does the following:
+		 * Disable (put tuner to sleep) when
+		 * - ALSA and DVB aren't not streaming;
+		 * - the last V4L2 file handler is closed.
+		 *
+		 * FIXME:
+		 *
+		 * Additionally, this logic could be improved to
+		 * disable the media source if the above conditions
+		 * are met and if the device:
+		 * - doesn't have a separate audio out plug (or
+		 * - doesn't use a silicon tuner like xc2028/3028/4000/5000).
+		 *
+		 * Once this additional logic is in place, a callback
+		 * is needed to enable the media source and power on
+		 * the tuner, for radio to work.
+		*/
+		ret = v4l_enable_media_source(vdev);
+		if (ret == 0)
+			v4l2_device_call_all(&dev->v4l2_dev, 0, tuner,
+					     standby);
+		dev->std_set_in_tuner_core = 0;
+
+		/* When close the device, set the usb intf0 into alt0 to free
+		   USB bandwidth */
+		ret = usb_set_interface(dev->usbdev, 0, 0);
+		if (ret < 0)
+			pr_info("Au0828 can't set alternate to 0!\n");
+	}
+end:
+	_vb2_fop_release(filp, NULL);
+	dev->users--;
+	mutex_unlock(&dev->lock);
+	return 0;
+}
+
+/* Must be called with dev->lock held */
+static void au0828_init_tuner(struct au0828_dev *dev)
+{
+	struct v4l2_frequency f = {
+		.frequency = dev->ctrl_freq,
+		.type = V4L2_TUNER_ANALOG_TV,
+	};
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	if (dev->std_set_in_tuner_core)
+		return;
+	dev->std_set_in_tuner_core = 1;
+	i2c_gate_ctrl(dev, 1);
+	/* If we've never sent the standard in tuner core, do so now.
+	   We don't do this at device probe because we don't want to
+	   incur the cost of a firmware load */
+	v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->std);
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
+	i2c_gate_ctrl(dev, 0);
+}
+
+static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd,
+			     struct v4l2_format *format)
+{
+	int ret;
+	int width = format->fmt.pix.width;
+	int height = format->fmt.pix.height;
+
+	/* If they are demanding a format other than the one we support,
+	   bail out (tvtime asks for UYVY and then retries with YUYV) */
+	if (format->fmt.pix.pixelformat != V4L2_PIX_FMT_UYVY)
+		return -EINVAL;
+
+	/* format->fmt.pix.width only support 720 and height 480 */
+	if (width != 720)
+		width = 720;
+	if (height != 480)
+		height = 480;
+
+	format->fmt.pix.width = width;
+	format->fmt.pix.height = height;
+	format->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
+	format->fmt.pix.bytesperline = width * 2;
+	format->fmt.pix.sizeimage = width * height * 2;
+	format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+	format->fmt.pix.field = V4L2_FIELD_INTERLACED;
+	format->fmt.pix.priv = 0;
+
+	if (cmd == VIDIOC_TRY_FMT)
+		return 0;
+
+	/* maybe set new image format, driver current only support 720*480 */
+	dev->width = width;
+	dev->height = height;
+	dev->frame_size = width * height * 2;
+	dev->field_size = width * height;
+	dev->bytesperline = width * 2;
+
+	if (dev->stream_state == STREAM_ON) {
+		dprintk(1, "VIDIOC_SET_FMT: interrupting stream!\n");
+		ret = au0828_stream_interrupt(dev);
+		if (ret != 0) {
+			dprintk(1, "error interrupting video stream!\n");
+			return ret;
+		}
+	}
+
+	au0828_analog_stream_enable(dev);
+
+	return 0;
+}
+
+static int vidioc_querycap(struct file *file, void  *priv,
+			   struct v4l2_capability *cap)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct au0828_dev *dev = video_drvdata(file);
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	strlcpy(cap->driver, "au0828", sizeof(cap->driver));
+	strlcpy(cap->card, dev->board.name, sizeof(cap->card));
+	usb_make_path(dev->usbdev, cap->bus_info, sizeof(cap->bus_info));
+
+	/* set the device capabilities */
+	cap->device_caps = V4L2_CAP_AUDIO |
+		V4L2_CAP_READWRITE |
+		V4L2_CAP_STREAMING |
+		V4L2_CAP_TUNER;
+	if (vdev->vfl_type == VFL_TYPE_GRABBER)
+		cap->device_caps |= V4L2_CAP_VIDEO_CAPTURE;
+	else
+		cap->device_caps |= V4L2_CAP_VBI_CAPTURE;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS |
+		V4L2_CAP_VBI_CAPTURE | V4L2_CAP_VIDEO_CAPTURE;
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *f)
+{
+	if (f->index)
+		return -EINVAL;
+
+	dprintk(1, "%s called\n", __func__);
+
+	f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	strcpy(f->description, "Packed YUV2");
+
+	f->flags = 0;
+	f->pixelformat = V4L2_PIX_FMT_UYVY;
+
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	f->fmt.pix.width = dev->width;
+	f->fmt.pix.height = dev->height;
+	f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
+	f->fmt.pix.bytesperline = dev->bytesperline;
+	f->fmt.pix.sizeimage = dev->frame_size;
+	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; /* NTSC/PAL */
+	f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+	f->fmt.pix.priv = 0;
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	return au0828_set_format(dev, VIDIOC_TRY_FMT, f);
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+	int rc;
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	if (vb2_is_busy(&dev->vb_vidq)) {
+		pr_info("%s queue busy\n", __func__);
+		rc = -EBUSY;
+		goto out;
+	}
+
+	rc = au0828_set_format(dev, VIDIOC_S_FMT, f);
+out:
+	return rc;
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	if (norm == dev->std)
+		return 0;
+
+	if (dev->streaming_users > 0)
+		return -EBUSY;
+
+	dev->std = norm;
+
+	au0828_init_tuner(dev);
+
+	i2c_gate_ctrl(dev, 1);
+
+	/*
+	 * FIXME: when we support something other than 60Hz standards,
+	 * we are going to have to make the au0828 bridge adjust the size
+	 * of its capture buffer, which is currently hardcoded at 720x480
+	 */
+
+	v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, norm);
+
+	i2c_gate_ctrl(dev, 0);
+
+	return 0;
+}
+
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	*norm = dev->std;
+	return 0;
+}
+
+static int vidioc_enum_input(struct file *file, void *priv,
+				struct v4l2_input *input)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+	unsigned int tmp;
+
+	static const char *inames[] = {
+		[AU0828_VMUX_UNDEFINED] = "Undefined",
+		[AU0828_VMUX_COMPOSITE] = "Composite",
+		[AU0828_VMUX_SVIDEO] = "S-Video",
+		[AU0828_VMUX_CABLE] = "Cable TV",
+		[AU0828_VMUX_TELEVISION] = "Television",
+		[AU0828_VMUX_DVB] = "DVB",
+	};
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	tmp = input->index;
+
+	if (tmp >= AU0828_MAX_INPUT)
+		return -EINVAL;
+	if (AUVI_INPUT(tmp).type == 0)
+		return -EINVAL;
+
+	input->index = tmp;
+	strcpy(input->name, inames[AUVI_INPUT(tmp).type]);
+	if ((AUVI_INPUT(tmp).type == AU0828_VMUX_TELEVISION) ||
+	    (AUVI_INPUT(tmp).type == AU0828_VMUX_CABLE)) {
+		input->type |= V4L2_INPUT_TYPE_TUNER;
+		input->audioset = 1;
+	} else {
+		input->type |= V4L2_INPUT_TYPE_CAMERA;
+		input->audioset = 2;
+	}
+
+	input->std = dev->vdev.tvnorms;
+
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	*i = dev->ctrl_input;
+	return 0;
+}
+
+static void au0828_s_input(struct au0828_dev *dev, int index)
+{
+	int i;
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	switch (AUVI_INPUT(index).type) {
+	case AU0828_VMUX_SVIDEO:
+		dev->input_type = AU0828_VMUX_SVIDEO;
+		dev->ctrl_ainput = 1;
+		break;
+	case AU0828_VMUX_COMPOSITE:
+		dev->input_type = AU0828_VMUX_COMPOSITE;
+		dev->ctrl_ainput = 1;
+		break;
+	case AU0828_VMUX_TELEVISION:
+		dev->input_type = AU0828_VMUX_TELEVISION;
+		dev->ctrl_ainput = 0;
+		break;
+	default:
+		dprintk(1, "unknown input type set [%d]\n",
+			AUVI_INPUT(index).type);
+		return;
+	}
+
+	dev->ctrl_input = index;
+
+	v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing,
+			AUVI_INPUT(index).vmux, 0, 0);
+
+	for (i = 0; i < AU0828_MAX_INPUT; i++) {
+		int enable = 0;
+		if (AUVI_INPUT(i).audio_setup == NULL)
+			continue;
+
+		if (i == index)
+			enable = 1;
+		else
+			enable = 0;
+		if (enable) {
+			(AUVI_INPUT(i).audio_setup)(dev, enable);
+		} else {
+			/* Make sure we leave it turned on if some
+			   other input is routed to this callback */
+			if ((AUVI_INPUT(i).audio_setup) !=
+			    ((AUVI_INPUT(index).audio_setup))) {
+				(AUVI_INPUT(i).audio_setup)(dev, enable);
+			}
+		}
+	}
+
+	v4l2_device_call_all(&dev->v4l2_dev, 0, audio, s_routing,
+			AUVI_INPUT(index).amux, 0, 0);
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int index)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+	struct video_device *vfd = video_devdata(file);
+
+	dprintk(1, "VIDIOC_S_INPUT in function %s, input=%d\n", __func__,
+		index);
+	if (index >= AU0828_MAX_INPUT)
+		return -EINVAL;
+	if (AUVI_INPUT(index).type == 0)
+		return -EINVAL;
+
+	if (dev->ctrl_input == index)
+		return 0;
+
+	au0828_s_input(dev, index);
+
+	/*
+	 * Input has been changed. Disable the media source
+	 * associated with the old input and enable source
+	 * for the newly set input
+	 */
+	v4l_disable_media_source(vfd);
+	return v4l_enable_media_source(vfd);
+}
+
+static int vidioc_enumaudio(struct file *file, void *priv, struct v4l2_audio *a)
+{
+	if (a->index > 1)
+		return -EINVAL;
+
+	dprintk(1, "%s called\n", __func__);
+
+	if (a->index == 0)
+		strcpy(a->name, "Television");
+	else
+		strcpy(a->name, "Line in");
+
+	a->capability = V4L2_AUDCAP_STEREO;
+	return 0;
+}
+
+static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	a->index = dev->ctrl_ainput;
+	if (a->index == 0)
+		strcpy(a->name, "Television");
+	else
+		strcpy(a->name, "Line in");
+
+	a->capability = V4L2_AUDCAP_STEREO;
+	return 0;
+}
+
+static int vidioc_s_audio(struct file *file, void *priv, const struct v4l2_audio *a)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	if (a->index != dev->ctrl_ainput)
+		return -EINVAL;
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+	struct video_device *vfd = video_devdata(file);
+	int ret;
+
+	if (t->index != 0)
+		return -EINVAL;
+
+	ret = v4l_enable_media_source(vfd);
+	if (ret)
+		return ret;
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	strcpy(t->name, "Auvitek tuner");
+
+	au0828_init_tuner(dev);
+	i2c_gate_ctrl(dev, 1);
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
+	i2c_gate_ctrl(dev, 0);
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *t)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	if (t->index != 0)
+		return -EINVAL;
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	au0828_init_tuner(dev);
+	i2c_gate_ctrl(dev, 1);
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t);
+	i2c_gate_ctrl(dev, 0);
+
+	dprintk(1, "VIDIOC_S_TUNER: signal = %x, afc = %x\n", t->signal,
+		t->afc);
+
+	return 0;
+
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *freq)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	if (freq->tuner != 0)
+		return -EINVAL;
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+	freq->frequency = dev->ctrl_freq;
+	return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *freq)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+	struct v4l2_frequency new_freq = *freq;
+
+	if (freq->tuner != 0)
+		return -EINVAL;
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	au0828_init_tuner(dev);
+	i2c_gate_ctrl(dev, 1);
+
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, freq);
+	/* Get the actual set (and possibly clamped) frequency */
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, &new_freq);
+	dev->ctrl_freq = new_freq.frequency;
+
+	i2c_gate_ctrl(dev, 0);
+
+	au0828_analog_stream_reset(dev);
+
+	return 0;
+}
+
+
+/* RAW VBI ioctls */
+
+static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
+				struct v4l2_format *format)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	format->fmt.vbi.samples_per_line = dev->vbi_width;
+	format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
+	format->fmt.vbi.offset = 0;
+	format->fmt.vbi.flags = 0;
+	format->fmt.vbi.sampling_rate = 6750000 * 4 / 2;
+
+	format->fmt.vbi.count[0] = dev->vbi_height;
+	format->fmt.vbi.count[1] = dev->vbi_height;
+	format->fmt.vbi.start[0] = 21;
+	format->fmt.vbi.start[1] = 284;
+	memset(format->fmt.vbi.reserved, 0, sizeof(format->fmt.vbi.reserved));
+
+	return 0;
+}
+
+static int vidioc_cropcap(struct file *file, void *priv,
+			  struct v4l2_cropcap *cc)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	cc->bounds.left = 0;
+	cc->bounds.top = 0;
+	cc->bounds.width = dev->width;
+	cc->bounds.height = dev->height;
+
+	cc->defrect = cc->bounds;
+
+	cc->pixelaspect.numerator = 54;
+	cc->pixelaspect.denominator = 59;
+
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vidioc_g_register(struct file *file, void *priv,
+			     struct v4l2_dbg_register *reg)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	reg->val = au0828_read(dev, reg->reg);
+	reg->size = 1;
+	return 0;
+}
+
+static int vidioc_s_register(struct file *file, void *priv,
+			     const struct v4l2_dbg_register *reg)
+{
+	struct au0828_dev *dev = video_drvdata(file);
+
+	dprintk(1, "%s called std_set %d dev_state %ld\n", __func__,
+		dev->std_set_in_tuner_core, dev->dev_state);
+
+	return au0828_writereg(dev, reg->reg, reg->val);
+}
+#endif
+
+static int vidioc_log_status(struct file *file, void *fh)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	dprintk(1, "%s called\n", __func__);
+
+	v4l2_ctrl_log_status(file, fh);
+	v4l2_device_call_all(vdev->v4l2_dev, 0, core, log_status);
+	return 0;
+}
+
+void au0828_v4l2_suspend(struct au0828_dev *dev)
+{
+	struct urb *urb;
+	int i;
+
+	pr_info("stopping V4L2\n");
+
+	if (dev->stream_state == STREAM_ON) {
+		pr_info("stopping V4L2 active URBs\n");
+		au0828_analog_stream_disable(dev);
+		/* stop urbs */
+		for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+			urb = dev->isoc_ctl.urb[i];
+			if (urb) {
+				if (!irqs_disabled())
+					usb_kill_urb(urb);
+				else
+					usb_unlink_urb(urb);
+			}
+		}
+	}
+
+	if (dev->vid_timeout_running)
+		del_timer_sync(&dev->vid_timeout);
+	if (dev->vbi_timeout_running)
+		del_timer_sync(&dev->vbi_timeout);
+}
+
+void au0828_v4l2_resume(struct au0828_dev *dev)
+{
+	int i, rc;
+
+	pr_info("restarting V4L2\n");
+
+	if (dev->stream_state == STREAM_ON) {
+		au0828_stream_interrupt(dev);
+		au0828_init_tuner(dev);
+	}
+
+	if (dev->vid_timeout_running)
+		mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
+	if (dev->vbi_timeout_running)
+		mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
+
+	/* If we were doing ac97 instead of i2s, it would go here...*/
+	au0828_i2s_init(dev);
+
+	au0828_analog_stream_enable(dev);
+
+	if (!(dev->stream_state == STREAM_ON)) {
+		au0828_analog_stream_reset(dev);
+		/* submit urbs */
+		for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+			rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC);
+			if (rc) {
+				au0828_isocdbg("submit of urb %i failed (error=%i)\n",
+					       i, rc);
+				au0828_uninit_isoc(dev);
+			}
+		}
+	}
+}
+
+static const struct v4l2_file_operations au0828_v4l_fops = {
+	.owner      = THIS_MODULE,
+	.open       = au0828_v4l2_open,
+	.release    = au0828_v4l2_close,
+	.read       = vb2_fop_read,
+	.poll       = vb2_fop_poll,
+	.mmap       = vb2_fop_mmap,
+	.unlocked_ioctl = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
+	.vidioc_querycap            = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap    = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap       = vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap     = vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap       = vidioc_s_fmt_vid_cap,
+	.vidioc_g_fmt_vbi_cap       = vidioc_g_fmt_vbi_cap,
+	.vidioc_try_fmt_vbi_cap     = vidioc_g_fmt_vbi_cap,
+	.vidioc_s_fmt_vbi_cap       = vidioc_g_fmt_vbi_cap,
+	.vidioc_enumaudio           = vidioc_enumaudio,
+	.vidioc_g_audio             = vidioc_g_audio,
+	.vidioc_s_audio             = vidioc_s_audio,
+	.vidioc_cropcap             = vidioc_cropcap,
+
+	.vidioc_reqbufs             = vb2_ioctl_reqbufs,
+	.vidioc_create_bufs         = vb2_ioctl_create_bufs,
+	.vidioc_prepare_buf         = vb2_ioctl_prepare_buf,
+	.vidioc_querybuf            = vb2_ioctl_querybuf,
+	.vidioc_qbuf                = vb2_ioctl_qbuf,
+	.vidioc_dqbuf               = vb2_ioctl_dqbuf,
+	.vidioc_expbuf               = vb2_ioctl_expbuf,
+
+	.vidioc_s_std               = vidioc_s_std,
+	.vidioc_g_std               = vidioc_g_std,
+	.vidioc_enum_input          = vidioc_enum_input,
+	.vidioc_g_input             = vidioc_g_input,
+	.vidioc_s_input             = vidioc_s_input,
+
+	.vidioc_streamon            = vb2_ioctl_streamon,
+	.vidioc_streamoff           = vb2_ioctl_streamoff,
+
+	.vidioc_g_tuner             = vidioc_g_tuner,
+	.vidioc_s_tuner             = vidioc_s_tuner,
+	.vidioc_g_frequency         = vidioc_g_frequency,
+	.vidioc_s_frequency         = vidioc_s_frequency,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register          = vidioc_g_register,
+	.vidioc_s_register          = vidioc_s_register,
+#endif
+	.vidioc_log_status	    = vidioc_log_status,
+	.vidioc_subscribe_event     = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event   = v4l2_event_unsubscribe,
+};
+
+static const struct video_device au0828_video_template = {
+	.fops                       = &au0828_v4l_fops,
+	.release                    = video_device_release_empty,
+	.ioctl_ops		    = &video_ioctl_ops,
+	.tvnorms                    = V4L2_STD_NTSC_M | V4L2_STD_PAL_M,
+};
+
+static int au0828_vb2_setup(struct au0828_dev *dev)
+{
+	int rc;
+	struct vb2_queue *q;
+
+	/* Setup Videobuf2 for Video capture */
+	q = &dev->vb_vidq;
+	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->drv_priv = dev;
+	q->buf_struct_size = sizeof(struct au0828_buffer);
+	q->ops = &au0828_video_qops;
+	q->mem_ops = &vb2_vmalloc_memops;
+
+	rc = vb2_queue_init(q);
+	if (rc < 0)
+		return rc;
+
+	/* Setup Videobuf2 for VBI capture */
+	q = &dev->vb_vbiq;
+	q->type = V4L2_BUF_TYPE_VBI_CAPTURE;
+	q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->drv_priv = dev;
+	q->buf_struct_size = sizeof(struct au0828_buffer);
+	q->ops = &au0828_vbi_qops;
+	q->mem_ops = &vb2_vmalloc_memops;
+
+	rc = vb2_queue_init(q);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static void au0828_analog_create_entities(struct au0828_dev *dev)
+{
+#if defined(CONFIG_MEDIA_CONTROLLER)
+	static const char * const inames[] = {
+		[AU0828_VMUX_COMPOSITE] = "Composite",
+		[AU0828_VMUX_SVIDEO] = "S-Video",
+		[AU0828_VMUX_CABLE] = "Cable TV",
+		[AU0828_VMUX_TELEVISION] = "Television",
+		[AU0828_VMUX_DVB] = "DVB",
+	};
+	int ret, i;
+
+	/* Initialize Video and VBI pads */
+	dev->video_pad.flags = MEDIA_PAD_FL_SINK;
+	ret = media_entity_pads_init(&dev->vdev.entity, 1, &dev->video_pad);
+	if (ret < 0)
+		pr_err("failed to initialize video media entity!\n");
+
+	dev->vbi_pad.flags = MEDIA_PAD_FL_SINK;
+	ret = media_entity_pads_init(&dev->vbi_dev.entity, 1, &dev->vbi_pad);
+	if (ret < 0)
+		pr_err("failed to initialize vbi media entity!\n");
+
+	/* Create entities for each input connector */
+	for (i = 0; i < AU0828_MAX_INPUT; i++) {
+		struct media_entity *ent = &dev->input_ent[i];
+
+		if (AUVI_INPUT(i).type == AU0828_VMUX_UNDEFINED)
+			break;
+
+		ent->name = inames[AUVI_INPUT(i).type];
+		ent->flags = MEDIA_ENT_FL_CONNECTOR;
+		dev->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
+
+		switch (AUVI_INPUT(i).type) {
+		case AU0828_VMUX_COMPOSITE:
+			ent->function = MEDIA_ENT_F_CONN_COMPOSITE;
+			break;
+		case AU0828_VMUX_SVIDEO:
+			ent->function = MEDIA_ENT_F_CONN_SVIDEO;
+			break;
+		case AU0828_VMUX_CABLE:
+		case AU0828_VMUX_TELEVISION:
+		case AU0828_VMUX_DVB:
+		default: /* Just to shut up a warning */
+			ent->function = MEDIA_ENT_F_CONN_RF;
+			break;
+		}
+
+		ret = media_entity_pads_init(ent, 1, &dev->input_pad[i]);
+		if (ret < 0)
+			pr_err("failed to initialize input pad[%d]!\n", i);
+
+		ret = media_device_register_entity(dev->media_dev, ent);
+		if (ret < 0)
+			pr_err("failed to register input entity %d!\n", i);
+	}
+#endif
+}
+
+/**************************************************************************/
+
+int au0828_analog_register(struct au0828_dev *dev,
+			   struct usb_interface *interface)
+{
+	int retval = -ENOMEM;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	int i, ret;
+
+	dprintk(1, "au0828_analog_register called for intf#%d!\n",
+		interface->cur_altsetting->desc.bInterfaceNumber);
+
+	/* No analog TV */
+	if (AUVI_INPUT(0).type == AU0828_VMUX_UNDEFINED)
+		return 0;
+
+	/* set au0828 usb interface0 to as5 */
+	retval = usb_set_interface(dev->usbdev,
+			interface->cur_altsetting->desc.bInterfaceNumber, 5);
+	if (retval != 0) {
+		pr_info("Failure setting usb interface0 to as5\n");
+		return retval;
+	}
+
+	/* Figure out which endpoint has the isoc interface */
+	iface_desc = interface->cur_altsetting;
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+		endpoint = &iface_desc->endpoint[i].desc;
+		if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		     == USB_DIR_IN) &&
+		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		     == USB_ENDPOINT_XFER_ISOC)) {
+
+			/* we find our isoc in endpoint */
+			u16 tmp = le16_to_cpu(endpoint->wMaxPacketSize);
+			dev->max_pkt_size = (tmp & 0x07ff) *
+				(((tmp & 0x1800) >> 11) + 1);
+			dev->isoc_in_endpointaddr = endpoint->bEndpointAddress;
+			dprintk(1,
+				"Found isoc endpoint 0x%02x, max size = %d\n",
+				dev->isoc_in_endpointaddr, dev->max_pkt_size);
+		}
+	}
+	if (!(dev->isoc_in_endpointaddr)) {
+		pr_info("Could not locate isoc endpoint\n");
+		return -ENODEV;
+	}
+
+	init_waitqueue_head(&dev->open);
+	spin_lock_init(&dev->slock);
+
+	/* init video dma queues */
+	INIT_LIST_HEAD(&dev->vidq.active);
+	INIT_LIST_HEAD(&dev->vbiq.active);
+
+	timer_setup(&dev->vid_timeout, au0828_vid_buffer_timeout, 0);
+	timer_setup(&dev->vbi_timeout, au0828_vbi_buffer_timeout, 0);
+
+	dev->width = NTSC_STD_W;
+	dev->height = NTSC_STD_H;
+	dev->field_size = dev->width * dev->height;
+	dev->frame_size = dev->field_size << 1;
+	dev->bytesperline = dev->width << 1;
+	dev->vbi_width = 720;
+	dev->vbi_height = 1;
+	dev->ctrl_ainput = 0;
+	dev->ctrl_freq = 960;
+	dev->std = V4L2_STD_NTSC_M;
+	/* Default input is TV Tuner */
+	au0828_s_input(dev, 0);
+
+	mutex_init(&dev->vb_queue_lock);
+	mutex_init(&dev->vb_vbi_queue_lock);
+
+	/* Fill the video capture device struct */
+	dev->vdev = au0828_video_template;
+	dev->vdev.v4l2_dev = &dev->v4l2_dev;
+	dev->vdev.lock = &dev->lock;
+	dev->vdev.queue = &dev->vb_vidq;
+	dev->vdev.queue->lock = &dev->vb_queue_lock;
+	strcpy(dev->vdev.name, "au0828a video");
+
+	/* Setup the VBI device */
+	dev->vbi_dev = au0828_video_template;
+	dev->vbi_dev.v4l2_dev = &dev->v4l2_dev;
+	dev->vbi_dev.lock = &dev->lock;
+	dev->vbi_dev.queue = &dev->vb_vbiq;
+	dev->vbi_dev.queue->lock = &dev->vb_vbi_queue_lock;
+	strcpy(dev->vbi_dev.name, "au0828a vbi");
+
+	/* Init entities at the Media Controller */
+	au0828_analog_create_entities(dev);
+
+	/* initialize videobuf2 stuff */
+	retval = au0828_vb2_setup(dev);
+	if (retval != 0) {
+		dprintk(1, "unable to setup videobuf2 queues (error = %d).\n",
+			retval);
+		return -ENODEV;
+	}
+
+	/* Register the v4l2 device */
+	video_set_drvdata(&dev->vdev, dev);
+	retval = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1);
+	if (retval != 0) {
+		dprintk(1, "unable to register video device (error = %d).\n",
+			retval);
+		ret = -ENODEV;
+		goto err_reg_vdev;
+	}
+
+	/* Register the vbi device */
+	video_set_drvdata(&dev->vbi_dev, dev);
+	retval = video_register_device(&dev->vbi_dev, VFL_TYPE_VBI, -1);
+	if (retval != 0) {
+		dprintk(1, "unable to register vbi device (error = %d).\n",
+			retval);
+		ret = -ENODEV;
+		goto err_reg_vbi_dev;
+	}
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+	retval = v4l2_mc_create_media_graph(dev->media_dev);
+	if (retval) {
+		pr_err("%s() au0282_dev_register failed to create graph\n",
+			__func__);
+		ret = -ENODEV;
+		goto err_reg_vbi_dev;
+	}
+#endif
+
+	dprintk(1, "%s completed!\n", __func__);
+
+	return 0;
+
+err_reg_vbi_dev:
+	video_unregister_device(&dev->vdev);
+err_reg_vdev:
+	vb2_queue_release(&dev->vb_vidq);
+	vb2_queue_release(&dev->vb_vbiq);
+	return ret;
+}
+