Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 226 insertions, 0 deletions

diff --git a/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h
new file mode 100644
index 000000000..8f00b1d38
--- /dev/null
+++ b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h
@@ -0,0 +1,226 @@
+/*
+   cx231xx-pcb-cfg.h - driver for Conexant
+		Cx23100/101/102 USB video capture devices
+
+   Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PCB_CONFIG_H_
+#define _PCB_CONFIG_H_
+
+#include <linux/init.h>
+#include <linux/module.h>
+
+/***************************************************************************
+				* Class Information *
+***************************************************************************/
+#define CLASS_DEFAULT       0xFF
+
+enum VENDOR_REQUEST_TYPE {
+	/* Set/Get I2C */
+	VRT_SET_I2C0 = 0x0,
+	VRT_SET_I2C1 = 0x1,
+	VRT_SET_I2C2 = 0x2,
+	VRT_GET_I2C0 = 0x4,
+	VRT_GET_I2C1 = 0x5,
+	VRT_GET_I2C2 = 0x6,
+
+	/* Set/Get GPIO */
+	VRT_SET_GPIO = 0x8,
+	VRT_GET_GPIO = 0x9,
+
+	/* Set/Get GPIE */
+	VRT_SET_GPIE = 0xA,
+	VRT_GET_GPIE = 0xB,
+
+	/* Set/Get Register Control/Status */
+	VRT_SET_REGISTER = 0xC,
+	VRT_GET_REGISTER = 0xD,
+
+	/* Get Extended Compat ID Descriptor */
+	VRT_GET_EXTCID_DESC = 0xFF,
+};
+
+enum BYTE_ENABLE_MASK {
+	ENABLE_ONE_BYTE = 0x1,
+	ENABLE_TWE_BYTE = 0x3,
+	ENABLE_THREE_BYTE = 0x7,
+	ENABLE_FOUR_BYTE = 0xF,
+};
+
+#define SPEED_MASK      0x1
+enum USB_SPEED{
+	FULL_SPEED = 0x0,	/* 0: full speed */
+	HIGH_SPEED = 0x1	/* 1: high speed */
+};
+
+#define TS_MASK         0x6
+enum TS_PORT{
+	NO_TS_PORT = 0x0,	/* 2'b00: Neither port used. PCB not a Hybrid,
+				   only offers Analog TV or Video */
+	TS1_PORT = 0x4,		/* 2'b10: TS1 Input (Hybrid mode :
+				Digital or External Analog/Compressed source) */
+	TS1_TS2_PORT = 0x6,	/* 2'b11: TS1 & TS2 Inputs
+				(Dual inputs from Digital and/or
+				External Analog/Compressed sources) */
+	TS1_EXT_CLOCK = 0x6,	/* 2'b11: TS1 & TS2 as selector
+						to external clock */
+	TS1VIP_TS2_PORT = 0x2	/* 2'b01: TS1 used as 656/VIP Output,
+				   TS2 Input (from Compressor) */
+};
+
+#define EAVP_MASK       0x8
+enum EAV_PRESENT{
+	NO_EXTERNAL_AV = 0x0,	/* 0: No External A/V inputs
+						(no need for i2s blcok),
+						Analog Tuner must be present */
+	EXTERNAL_AV = 0x8	/* 1: External A/V inputs
+						present (requires i2s blk) */
+};
+
+#define ATM_MASK        0x30
+enum AT_MODE{
+	DIF_TUNER = 0x30,	/* 2'b11: IF Tuner (requires use of DIF) */
+	BASEBAND_SOUND = 0x20,	/* 2'b10: Baseband Composite &
+						Sound-IF Signals present */
+	NO_TUNER = 0x10		/* 2'b0x: No Analog Tuner present */
+};
+
+#define PWR_SEL_MASK    0x40
+enum POWE_TYPE{
+	SELF_POWER = 0x0,	/* 0: self power */
+	BUS_POWER = 0x40	/* 1: bus power */
+};
+
+enum USB_POWE_TYPE{
+	USB_SELF_POWER = 0,
+	USB_BUS_POWER
+};
+
+#define BO_0_MASK       0x80
+enum AVDEC_STATUS{
+	AVDEC_DISABLE = 0x0,	/* 0: A/V Decoder Disabled */
+	AVDEC_ENABLE = 0x80	/* 1: A/V Decoder Enabled */
+};
+
+#define BO_1_MASK       0x100
+
+#define BUSPOWER_MASK   0xC4	/* for Polaris spec 0.8 */
+#define SELFPOWER_MASK  0x86
+
+/***************************************************************************/
+#define NOT_DECIDE_YET  0xFE
+#define NOT_SUPPORTED   0xFF
+
+/***************************************************************************
+				* for mod field use *
+***************************************************************************/
+#define MOD_DIGITAL     0x1
+#define MOD_ANALOG      0x2
+#define MOD_DIF         0x4
+#define MOD_EXTERNAL    0x8
+#define CAP_ALL_MOD     0x0f
+
+/***************************************************************************
+				* source define *
+***************************************************************************/
+#define SOURCE_DIGITAL          0x1
+#define SOURCE_ANALOG           0x2
+#define SOURCE_DIF              0x4
+#define SOURCE_EXTERNAL         0x8
+#define SOURCE_TS_BDA			0x10
+#define SOURCE_TS_ENCODE		0x20
+#define SOURCE_TS_EXTERNAL	0x40
+
+/***************************************************************************
+				* interface information define *
+***************************************************************************/
+struct INTERFACE_INFO {
+	u8 interrupt_index;
+	u8 ts1_index;
+	u8 ts2_index;
+	u8 audio_index;
+	u8 video_index;
+	u8 vanc_index;		/* VBI */
+	u8 hanc_index;		/* Sliced CC */
+	u8 ir_index;
+};
+
+enum INDEX_INTERFACE_INFO{
+	INDEX_INTERRUPT = 0x0,
+	INDEX_TS1,
+	INDEX_TS2,
+	INDEX_AUDIO,
+	INDEX_VIDEO,
+	INDEX_VANC,
+	INDEX_HANC,
+	INDEX_IR,
+};
+
+/***************************************************************************
+				* configuration information define *
+***************************************************************************/
+struct CONFIG_INFO {
+	u8 config_index;
+	struct INTERFACE_INFO interface_info;
+};
+
+struct pcb_config {
+	u8 index;
+	u8 type;		/* bus power or self power,
+					   self power--0, bus_power--1 */
+	u8 speed;		/* usb speed, 2.0--1, 1.1--0 */
+	u8 mode;		/* digital , anlog, dif or external A/V */
+	u32 ts1_source;		/* three source -- BDA,External,encode */
+	u32 ts2_source;
+	u32 analog_source;
+	u8 digital_index;	/* bus-power used */
+	u8 analog_index;	/* bus-power used */
+	u8 dif_index;		/* bus-power used */
+	u8 external_index;	/* bus-power used */
+	u8 config_num;		/* current config num, 0,1,2,
+						   for self-power, always 0 */
+	struct CONFIG_INFO hs_config_info[3];
+	struct CONFIG_INFO fs_config_info[3];
+};
+
+enum INDEX_PCB_CONFIG{
+	INDEX_SELFPOWER_DIGITAL_ONLY = 0x0,
+	INDEX_SELFPOWER_DUAL_DIGITAL,
+	INDEX_SELFPOWER_ANALOG_ONLY,
+	INDEX_SELFPOWER_DUAL,
+	INDEX_SELFPOWER_TRIPLE,
+	INDEX_SELFPOWER_COMPRESSOR,
+	INDEX_BUSPOWER_DIGITAL_ONLY,
+	INDEX_BUSPOWER_ANALOG_ONLY,
+	INDEX_BUSPOWER_DIF_ONLY,
+	INDEX_BUSPOWER_EXTERNAL_ONLY,
+	INDEX_BUSPOWER_EXTERNAL_ANALOG,
+	INDEX_BUSPOWER_EXTERNAL_DIF,
+	INDEX_BUSPOWER_EXTERNAL_DIGITAL,
+	INDEX_BUSPOWER_DIGITAL_ANALOG,
+	INDEX_BUSPOWER_DIGITAL_DIF,
+	INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL,
+	INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL,
+};
+
+/***************************************************************************/
+struct cx231xx;
+
+int initialize_cx231xx(struct cx231xx *p_dev);
+
+#endif