Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1879 insertions, 0 deletions

diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
new file mode 100644
index 000000000..f77493604
--- /dev/null
+++ b/drivers/mmc/host/s3cmci.c
@@ -0,0 +1,1879 @@
+/*
+ *  linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
+ *
+ *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
+ *
+ * Current driver maintained by Ben Dooks and Simtec Electronics
+ *  Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/mmc/slot-gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <mach/dma.h>
+#include <mach/gpio-samsung.h>
+
+#include <linux/platform_data/mmc-s3cmci.h>
+
+#include "s3cmci.h"
+
+#define DRIVER_NAME "s3c-mci"
+
+#define S3C2410_SDICON			(0x00)
+#define S3C2410_SDIPRE			(0x04)
+#define S3C2410_SDICMDARG		(0x08)
+#define S3C2410_SDICMDCON		(0x0C)
+#define S3C2410_SDICMDSTAT		(0x10)
+#define S3C2410_SDIRSP0			(0x14)
+#define S3C2410_SDIRSP1			(0x18)
+#define S3C2410_SDIRSP2			(0x1C)
+#define S3C2410_SDIRSP3			(0x20)
+#define S3C2410_SDITIMER		(0x24)
+#define S3C2410_SDIBSIZE		(0x28)
+#define S3C2410_SDIDCON			(0x2C)
+#define S3C2410_SDIDCNT			(0x30)
+#define S3C2410_SDIDSTA			(0x34)
+#define S3C2410_SDIFSTA			(0x38)
+
+#define S3C2410_SDIDATA			(0x3C)
+#define S3C2410_SDIIMSK			(0x40)
+
+#define S3C2440_SDIDATA			(0x40)
+#define S3C2440_SDIIMSK			(0x3C)
+
+#define S3C2440_SDICON_SDRESET		(1 << 8)
+#define S3C2410_SDICON_SDIOIRQ		(1 << 3)
+#define S3C2410_SDICON_FIFORESET	(1 << 1)
+#define S3C2410_SDICON_CLOCKTYPE	(1 << 0)
+
+#define S3C2410_SDICMDCON_LONGRSP	(1 << 10)
+#define S3C2410_SDICMDCON_WAITRSP	(1 << 9)
+#define S3C2410_SDICMDCON_CMDSTART	(1 << 8)
+#define S3C2410_SDICMDCON_SENDERHOST	(1 << 6)
+#define S3C2410_SDICMDCON_INDEX		(0x3f)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL	(1 << 12)
+#define S3C2410_SDICMDSTAT_CMDSENT	(1 << 11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT	(1 << 10)
+#define S3C2410_SDICMDSTAT_RSPFIN	(1 << 9)
+
+#define S3C2440_SDIDCON_DS_WORD		(2 << 22)
+#define S3C2410_SDIDCON_TXAFTERRESP	(1 << 20)
+#define S3C2410_SDIDCON_RXAFTERCMD	(1 << 19)
+#define S3C2410_SDIDCON_BLOCKMODE	(1 << 17)
+#define S3C2410_SDIDCON_WIDEBUS		(1 << 16)
+#define S3C2410_SDIDCON_DMAEN		(1 << 15)
+#define S3C2410_SDIDCON_STOP		(1 << 14)
+#define S3C2440_SDIDCON_DATSTART	(1 << 14)
+
+#define S3C2410_SDIDCON_XFER_RXSTART	(2 << 12)
+#define S3C2410_SDIDCON_XFER_TXSTART	(3 << 12)
+
+#define S3C2410_SDIDCON_BLKNUM_MASK	(0xFFF)
+
+#define S3C2410_SDIDSTA_SDIOIRQDETECT	(1 << 9)
+#define S3C2410_SDIDSTA_FIFOFAIL	(1 << 8)
+#define S3C2410_SDIDSTA_CRCFAIL		(1 << 7)
+#define S3C2410_SDIDSTA_RXCRCFAIL	(1 << 6)
+#define S3C2410_SDIDSTA_DATATIMEOUT	(1 << 5)
+#define S3C2410_SDIDSTA_XFERFINISH	(1 << 4)
+#define S3C2410_SDIDSTA_TXDATAON	(1 << 1)
+#define S3C2410_SDIDSTA_RXDATAON	(1 << 0)
+
+#define S3C2440_SDIFSTA_FIFORESET	(1 << 16)
+#define S3C2440_SDIFSTA_FIFOFAIL	(3 << 14)
+#define S3C2410_SDIFSTA_TFDET		(1 << 13)
+#define S3C2410_SDIFSTA_RFDET		(1 << 12)
+#define S3C2410_SDIFSTA_COUNTMASK	(0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC	(1 << 17)
+#define S3C2410_SDIIMSK_CMDSENT		(1 << 16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT	(1 << 15)
+#define S3C2410_SDIIMSK_RESPONSEND	(1 << 14)
+#define S3C2410_SDIIMSK_SDIOIRQ		(1 << 12)
+#define S3C2410_SDIIMSK_FIFOFAIL	(1 << 11)
+#define S3C2410_SDIIMSK_CRCSTATUS	(1 << 10)
+#define S3C2410_SDIIMSK_DATACRC		(1 << 9)
+#define S3C2410_SDIIMSK_DATATIMEOUT	(1 << 8)
+#define S3C2410_SDIIMSK_DATAFINISH	(1 << 7)
+#define S3C2410_SDIIMSK_TXFIFOHALF	(1 << 4)
+#define S3C2410_SDIIMSK_RXFIFOLAST	(1 << 2)
+#define S3C2410_SDIIMSK_RXFIFOHALF	(1 << 0)
+
+enum dbg_channels {
+	dbg_err   = (1 << 0),
+	dbg_debug = (1 << 1),
+	dbg_info  = (1 << 2),
+	dbg_irq   = (1 << 3),
+	dbg_sg    = (1 << 4),
+	dbg_dma   = (1 << 5),
+	dbg_pio   = (1 << 6),
+	dbg_fail  = (1 << 7),
+	dbg_conf  = (1 << 8),
+};
+
+static const int dbgmap_err   = dbg_fail;
+static const int dbgmap_info  = dbg_info | dbg_conf;
+static const int dbgmap_debug = dbg_err | dbg_debug;
+
+#define dbg(host, channels, args...)		  \
+	do {					  \
+	if (dbgmap_err & channels) 		  \
+		dev_err(&host->pdev->dev, args);  \
+	else if (dbgmap_info & channels)	  \
+		dev_info(&host->pdev->dev, args); \
+	else if (dbgmap_debug & channels)	  \
+		dev_dbg(&host->pdev->dev, args);  \
+	} while (0)
+
+static void finalize_request(struct s3cmci_host *host);
+static void s3cmci_send_request(struct mmc_host *mmc);
+static void s3cmci_reset(struct s3cmci_host *host);
+
+#ifdef CONFIG_MMC_DEBUG
+
+static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
+{
+	u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize;
+	u32 datcon, datcnt, datsta, fsta, imask;
+
+	con 	= readl(host->base + S3C2410_SDICON);
+	pre 	= readl(host->base + S3C2410_SDIPRE);
+	cmdarg 	= readl(host->base + S3C2410_SDICMDARG);
+	cmdcon 	= readl(host->base + S3C2410_SDICMDCON);
+	cmdsta 	= readl(host->base + S3C2410_SDICMDSTAT);
+	r0 	= readl(host->base + S3C2410_SDIRSP0);
+	r1 	= readl(host->base + S3C2410_SDIRSP1);
+	r2 	= readl(host->base + S3C2410_SDIRSP2);
+	r3 	= readl(host->base + S3C2410_SDIRSP3);
+	timer 	= readl(host->base + S3C2410_SDITIMER);
+	bsize 	= readl(host->base + S3C2410_SDIBSIZE);
+	datcon 	= readl(host->base + S3C2410_SDIDCON);
+	datcnt 	= readl(host->base + S3C2410_SDIDCNT);
+	datsta 	= readl(host->base + S3C2410_SDIDSTA);
+	fsta 	= readl(host->base + S3C2410_SDIFSTA);
+	imask   = readl(host->base + host->sdiimsk);
+
+	dbg(host, dbg_debug, "%s  CON:[%08x]  PRE:[%08x]  TMR:[%08x]\n",
+				prefix, con, pre, timer);
+
+	dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n",
+				prefix, cmdcon, cmdarg, cmdsta);
+
+	dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]"
+			       " DSTA:[%08x] DCNT:[%08x]\n",
+				prefix, datcon, fsta, datsta, datcnt);
+
+	dbg(host, dbg_debug, "%s   R0:[%08x]   R1:[%08x]"
+			       "   R2:[%08x]   R3:[%08x]\n",
+				prefix, r0, r1, r2, r3);
+}
+
+static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
+			   int stop)
+{
+	snprintf(host->dbgmsg_cmd, 300,
+		 "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u",
+		 host->ccnt, (stop ? " (STOP)" : ""),
+		 cmd->opcode, cmd->arg, cmd->flags, cmd->retries);
+
+	if (cmd->data) {
+		snprintf(host->dbgmsg_dat, 300,
+			 "#%u bsize:%u blocks:%u bytes:%u",
+			 host->dcnt, cmd->data->blksz,
+			 cmd->data->blocks,
+			 cmd->data->blocks * cmd->data->blksz);
+	} else {
+		host->dbgmsg_dat[0] = '\0';
+	}
+}
+
+static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd,
+			int fail)
+{
+	unsigned int dbglvl = fail ? dbg_fail : dbg_debug;
+
+	if (!cmd)
+		return;
+
+	if (cmd->error == 0) {
+		dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n",
+			host->dbgmsg_cmd, cmd->resp[0]);
+	} else {
+		dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n",
+			cmd->error, host->dbgmsg_cmd, host->status);
+	}
+
+	if (!cmd->data)
+		return;
+
+	if (cmd->data->error == 0) {
+		dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat);
+	} else {
+		dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n",
+			cmd->data->error, host->dbgmsg_dat,
+			readl(host->base + S3C2410_SDIDCNT));
+	}
+}
+#else
+static void dbg_dumpcmd(struct s3cmci_host *host,
+			struct mmc_command *cmd, int fail) { }
+
+static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
+			   int stop) { }
+
+static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
+
+#endif /* CONFIG_MMC_DEBUG */
+
+/**
+ * s3cmci_host_usedma - return whether the host is using dma or pio
+ * @host: The host state
+ *
+ * Return true if the host is using DMA to transfer data, else false
+ * to use PIO mode. Will return static data depending on the driver
+ * configuration.
+ */
+static inline bool s3cmci_host_usedma(struct s3cmci_host *host)
+{
+#ifdef CONFIG_MMC_S3C_PIO
+	return false;
+#else /* CONFIG_MMC_S3C_DMA */
+	return true;
+#endif
+}
+
+static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
+{
+	u32 newmask;
+
+	newmask = readl(host->base + host->sdiimsk);
+	newmask |= imask;
+
+	writel(newmask, host->base + host->sdiimsk);
+
+	return newmask;
+}
+
+static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
+{
+	u32 newmask;
+
+	newmask = readl(host->base + host->sdiimsk);
+	newmask &= ~imask;
+
+	writel(newmask, host->base + host->sdiimsk);
+
+	return newmask;
+}
+
+static inline void clear_imask(struct s3cmci_host *host)
+{
+	u32 mask = readl(host->base + host->sdiimsk);
+
+	/* preserve the SDIO IRQ mask state */
+	mask &= S3C2410_SDIIMSK_SDIOIRQ;
+	writel(mask, host->base + host->sdiimsk);
+}
+
+/**
+ * s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled
+ * @host: The host to check.
+ *
+ * Test to see if the SDIO interrupt is being signalled in case the
+ * controller has failed to re-detect a card interrupt. Read GPE8 and
+ * see if it is low and if so, signal a SDIO interrupt.
+ *
+ * This is currently called if a request is finished (we assume that the
+ * bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is
+ * already being indicated.
+*/
+static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
+{
+	if (host->sdio_irqen) {
+		if (gpio_get_value(S3C2410_GPE(8)) == 0) {
+			pr_debug("%s: signalling irq\n", __func__);
+			mmc_signal_sdio_irq(host->mmc);
+		}
+	}
+}
+
+static inline int get_data_buffer(struct s3cmci_host *host,
+				  u32 *bytes, u32 **pointer)
+{
+	struct scatterlist *sg;
+
+	if (host->pio_active == XFER_NONE)
+		return -EINVAL;
+
+	if ((!host->mrq) || (!host->mrq->data))
+		return -EINVAL;
+
+	if (host->pio_sgptr >= host->mrq->data->sg_len) {
+		dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
+		      host->pio_sgptr, host->mrq->data->sg_len);
+		return -EBUSY;
+	}
+	sg = &host->mrq->data->sg[host->pio_sgptr];
+
+	*bytes = sg->length;
+	*pointer = sg_virt(sg);
+
+	host->pio_sgptr++;
+
+	dbg(host, dbg_sg, "new buffer (%i/%i)\n",
+	    host->pio_sgptr, host->mrq->data->sg_len);
+
+	return 0;
+}
+
+static inline u32 fifo_count(struct s3cmci_host *host)
+{
+	u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
+
+	fifostat &= S3C2410_SDIFSTA_COUNTMASK;
+	return fifostat;
+}
+
+static inline u32 fifo_free(struct s3cmci_host *host)
+{
+	u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
+
+	fifostat &= S3C2410_SDIFSTA_COUNTMASK;
+	return 63 - fifostat;
+}
+
+/**
+ * s3cmci_enable_irq - enable IRQ, after having disabled it.
+ * @host: The device state.
+ * @more: True if more IRQs are expected from transfer.
+ *
+ * Enable the main IRQ if needed after it has been disabled.
+ *
+ * The IRQ can be one of the following states:
+ *	- disabled during IDLE
+ *	- disabled whilst processing data
+ *	- enabled during transfer
+ *	- enabled whilst awaiting SDIO interrupt detection
+ */
+static void s3cmci_enable_irq(struct s3cmci_host *host, bool more)
+{
+	unsigned long flags;
+	bool enable = false;
+
+	local_irq_save(flags);
+
+	host->irq_enabled = more;
+	host->irq_disabled = false;
+
+	enable = more | host->sdio_irqen;
+
+	if (host->irq_state != enable) {
+		host->irq_state = enable;
+
+		if (enable)
+			enable_irq(host->irq);
+		else
+			disable_irq(host->irq);
+	}
+
+	local_irq_restore(flags);
+}
+
+/**
+ *
+ */
+static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/* pr_debug("%s: transfer %d\n", __func__, transfer); */
+
+	host->irq_disabled = transfer;
+
+	if (transfer && host->irq_state) {
+		host->irq_state = false;
+		disable_irq(host->irq);
+	}
+
+	local_irq_restore(flags);
+}
+
+static void do_pio_read(struct s3cmci_host *host)
+{
+	int res;
+	u32 fifo;
+	u32 *ptr;
+	u32 fifo_words;
+	void __iomem *from_ptr;
+
+	/* write real prescaler to host, it might be set slow to fix */
+	writel(host->prescaler, host->base + S3C2410_SDIPRE);
+
+	from_ptr = host->base + host->sdidata;
+
+	while ((fifo = fifo_count(host))) {
+		if (!host->pio_bytes) {
+			res = get_data_buffer(host, &host->pio_bytes,
+					      &host->pio_ptr);
+			if (res) {
+				host->pio_active = XFER_NONE;
+				host->complete_what = COMPLETION_FINALIZE;
+
+				dbg(host, dbg_pio, "pio_read(): "
+				    "complete (no more data).\n");
+				return;
+			}
+
+			dbg(host, dbg_pio,
+			    "pio_read(): new target: [%i]@[%p]\n",
+			    host->pio_bytes, host->pio_ptr);
+		}
+
+		dbg(host, dbg_pio,
+		    "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n",
+		    fifo, host->pio_bytes,
+		    readl(host->base + S3C2410_SDIDCNT));
+
+		/* If we have reached the end of the block, we can
+		 * read a word and get 1 to 3 bytes.  If we in the
+		 * middle of the block, we have to read full words,
+		 * otherwise we will write garbage, so round down to
+		 * an even multiple of 4. */
+		if (fifo >= host->pio_bytes)
+			fifo = host->pio_bytes;
+		else
+			fifo -= fifo & 3;
+
+		host->pio_bytes -= fifo;
+		host->pio_count += fifo;
+
+		fifo_words = fifo >> 2;
+		ptr = host->pio_ptr;
+		while (fifo_words--)
+			*ptr++ = readl(from_ptr);
+		host->pio_ptr = ptr;
+
+		if (fifo & 3) {
+			u32 n = fifo & 3;
+			u32 data = readl(from_ptr);
+			u8 *p = (u8 *)host->pio_ptr;
+
+			while (n--) {
+				*p++ = data;
+				data >>= 8;
+			}
+		}
+	}
+
+	if (!host->pio_bytes) {
+		res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr);
+		if (res) {
+			dbg(host, dbg_pio,
+			    "pio_read(): complete (no more buffers).\n");
+			host->pio_active = XFER_NONE;
+			host->complete_what = COMPLETION_FINALIZE;
+
+			return;
+		}
+	}
+
+	enable_imask(host,
+		     S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
+}
+
+static void do_pio_write(struct s3cmci_host *host)
+{
+	void __iomem *to_ptr;
+	int res;
+	u32 fifo;
+	u32 *ptr;
+
+	to_ptr = host->base + host->sdidata;
+
+	while ((fifo = fifo_free(host)) > 3) {
+		if (!host->pio_bytes) {
+			res = get_data_buffer(host, &host->pio_bytes,
+							&host->pio_ptr);
+			if (res) {
+				dbg(host, dbg_pio,
+				    "pio_write(): complete (no more data).\n");
+				host->pio_active = XFER_NONE;
+
+				return;
+			}
+
+			dbg(host, dbg_pio,
+			    "pio_write(): new source: [%i]@[%p]\n",
+			    host->pio_bytes, host->pio_ptr);
+
+		}
+
+		/* If we have reached the end of the block, we have to
+		 * write exactly the remaining number of bytes.  If we
+		 * in the middle of the block, we have to write full
+		 * words, so round down to an even multiple of 4. */
+		if (fifo >= host->pio_bytes)
+			fifo = host->pio_bytes;
+		else
+			fifo -= fifo & 3;
+
+		host->pio_bytes -= fifo;
+		host->pio_count += fifo;
+
+		fifo = (fifo + 3) >> 2;
+		ptr = host->pio_ptr;
+		while (fifo--)
+			writel(*ptr++, to_ptr);
+		host->pio_ptr = ptr;
+	}
+
+	enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
+}
+
+static void pio_tasklet(unsigned long data)
+{
+	struct s3cmci_host *host = (struct s3cmci_host *) data;
+
+	s3cmci_disable_irq(host, true);
+
+	if (host->pio_active == XFER_WRITE)
+		do_pio_write(host);
+
+	if (host->pio_active == XFER_READ)
+		do_pio_read(host);
+
+	if (host->complete_what == COMPLETION_FINALIZE) {
+		clear_imask(host);
+		if (host->pio_active != XFER_NONE) {
+			dbg(host, dbg_err, "unfinished %s "
+			    "- pio_count:[%u] pio_bytes:[%u]\n",
+			    (host->pio_active == XFER_READ) ? "read" : "write",
+			    host->pio_count, host->pio_bytes);
+
+			if (host->mrq->data)
+				host->mrq->data->error = -EINVAL;
+		}
+
+		s3cmci_enable_irq(host, false);
+		finalize_request(host);
+	} else
+		s3cmci_enable_irq(host, true);
+}
+
+/*
+ * ISR for SDI Interface IRQ
+ * Communication between driver and ISR works as follows:
+ *   host->mrq 			points to current request
+ *   host->complete_what	Indicates when the request is considered done
+ *     COMPLETION_CMDSENT	  when the command was sent
+ *     COMPLETION_RSPFIN          when a response was received
+ *     COMPLETION_XFERFINISH	  when the data transfer is finished
+ *     COMPLETION_XFERFINISH_RSPFIN both of the above.
+ *   host->complete_request	is the completion-object the driver waits for
+ *
+ * 1) Driver sets up host->mrq and host->complete_what
+ * 2) Driver prepares the transfer
+ * 3) Driver enables interrupts
+ * 4) Driver starts transfer
+ * 5) Driver waits for host->complete_rquest
+ * 6) ISR checks for request status (errors and success)
+ * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error
+ * 7) ISR completes host->complete_request
+ * 8) ISR disables interrupts
+ * 9) Driver wakes up and takes care of the request
+ *
+ * Note: "->error"-fields are expected to be set to 0 before the request
+ *       was issued by mmc.c - therefore they are only set, when an error
+ *       contition comes up
+ */
+
+static irqreturn_t s3cmci_irq(int irq, void *dev_id)
+{
+	struct s3cmci_host *host = dev_id;
+	struct mmc_command *cmd;
+	u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
+	u32 mci_cclear = 0, mci_dclear;
+	unsigned long iflags;
+
+	mci_dsta = readl(host->base + S3C2410_SDIDSTA);
+	mci_imsk = readl(host->base + host->sdiimsk);
+
+	if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) {
+		if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) {
+			mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT;
+			writel(mci_dclear, host->base + S3C2410_SDIDSTA);
+
+			mmc_signal_sdio_irq(host->mmc);
+			return IRQ_HANDLED;
+		}
+	}
+
+	spin_lock_irqsave(&host->complete_lock, iflags);
+
+	mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
+	mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
+	mci_fsta = readl(host->base + S3C2410_SDIFSTA);
+	mci_dclear = 0;
+
+	if ((host->complete_what == COMPLETION_NONE) ||
+	    (host->complete_what == COMPLETION_FINALIZE)) {
+		host->status = "nothing to complete";
+		clear_imask(host);
+		goto irq_out;
+	}
+
+	if (!host->mrq) {
+		host->status = "no active mrq";
+		clear_imask(host);
+		goto irq_out;
+	}
+
+	cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd;
+
+	if (!cmd) {
+		host->status = "no active cmd";
+		clear_imask(host);
+		goto irq_out;
+	}
+
+	if (!s3cmci_host_usedma(host)) {
+		if ((host->pio_active == XFER_WRITE) &&
+		    (mci_fsta & S3C2410_SDIFSTA_TFDET)) {
+
+			disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
+			tasklet_schedule(&host->pio_tasklet);
+			host->status = "pio tx";
+		}
+
+		if ((host->pio_active == XFER_READ) &&
+		    (mci_fsta & S3C2410_SDIFSTA_RFDET)) {
+
+			disable_imask(host,
+				      S3C2410_SDIIMSK_RXFIFOHALF |
+				      S3C2410_SDIIMSK_RXFIFOLAST);
+
+			tasklet_schedule(&host->pio_tasklet);
+			host->status = "pio rx";
+		}
+	}
+
+	if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
+		dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n");
+		cmd->error = -ETIMEDOUT;
+		host->status = "error: command timeout";
+		goto fail_transfer;
+	}
+
+	if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) {
+		if (host->complete_what == COMPLETION_CMDSENT) {
+			host->status = "ok: command sent";
+			goto close_transfer;
+		}
+
+		mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT;
+	}
+
+	if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) {
+		if (cmd->flags & MMC_RSP_CRC) {
+			if (host->mrq->cmd->flags & MMC_RSP_136) {
+				dbg(host, dbg_irq,
+				    "fixup: ignore CRC fail with long rsp\n");
+			} else {
+				/* note, we used to fail the transfer
+				 * here, but it seems that this is just
+				 * the hardware getting it wrong.
+				 *
+				 * cmd->error = -EILSEQ;
+				 * host->status = "error: bad command crc";
+				 * goto fail_transfer;
+				*/
+			}
+		}
+
+		mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL;
+	}
+
+	if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) {
+		if (host->complete_what == COMPLETION_RSPFIN) {
+			host->status = "ok: command response received";
+			goto close_transfer;
+		}
+
+		if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
+			host->complete_what = COMPLETION_XFERFINISH;
+
+		mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN;
+	}
+
+	/* errors handled after this point are only relevant
+	   when a data transfer is in progress */
+
+	if (!cmd->data)
+		goto clear_status_bits;
+
+	/* Check for FIFO failure */
+	if (host->is2440) {
+		if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
+			dbg(host, dbg_err, "FIFO failure\n");
+			host->mrq->data->error = -EILSEQ;
+			host->status = "error: 2440 fifo failure";
+			goto fail_transfer;
+		}
+	} else {
+		if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
+			dbg(host, dbg_err, "FIFO failure\n");
+			cmd->data->error = -EILSEQ;
+			host->status = "error:  fifo failure";
+			goto fail_transfer;
+		}
+	}
+
+	if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
+		dbg(host, dbg_err, "bad data crc (outgoing)\n");
+		cmd->data->error = -EILSEQ;
+		host->status = "error: bad data crc (outgoing)";
+		goto fail_transfer;
+	}
+
+	if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
+		dbg(host, dbg_err, "bad data crc (incoming)\n");
+		cmd->data->error = -EILSEQ;
+		host->status = "error: bad data crc (incoming)";
+		goto fail_transfer;
+	}
+
+	if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
+		dbg(host, dbg_err, "data timeout\n");
+		cmd->data->error = -ETIMEDOUT;
+		host->status = "error: data timeout";
+		goto fail_transfer;
+	}
+
+	if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) {
+		if (host->complete_what == COMPLETION_XFERFINISH) {
+			host->status = "ok: data transfer completed";
+			goto close_transfer;
+		}
+
+		if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
+			host->complete_what = COMPLETION_RSPFIN;
+
+		mci_dclear |= S3C2410_SDIDSTA_XFERFINISH;
+	}
+
+clear_status_bits:
+	writel(mci_cclear, host->base + S3C2410_SDICMDSTAT);
+	writel(mci_dclear, host->base + S3C2410_SDIDSTA);
+
+	goto irq_out;
+
+fail_transfer:
+	host->pio_active = XFER_NONE;
+
+close_transfer:
+	host->complete_what = COMPLETION_FINALIZE;
+
+	clear_imask(host);
+	tasklet_schedule(&host->pio_tasklet);
+
+	goto irq_out;
+
+irq_out:
+	dbg(host, dbg_irq,
+	    "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n",
+	    mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status);
+
+	spin_unlock_irqrestore(&host->complete_lock, iflags);
+	return IRQ_HANDLED;
+
+}
+
+static void s3cmci_dma_done_callback(void *arg)
+{
+	struct s3cmci_host *host = arg;
+	unsigned long iflags;
+
+	BUG_ON(!host->mrq);
+	BUG_ON(!host->mrq->data);
+
+	spin_lock_irqsave(&host->complete_lock, iflags);
+
+	dbg(host, dbg_dma, "DMA FINISHED\n");
+
+	host->dma_complete = 1;
+	host->complete_what = COMPLETION_FINALIZE;
+
+	tasklet_schedule(&host->pio_tasklet);
+	spin_unlock_irqrestore(&host->complete_lock, iflags);
+
+}
+
+static void finalize_request(struct s3cmci_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd;
+	int debug_as_failure = 0;
+
+	if (host->complete_what != COMPLETION_FINALIZE)
+		return;
+
+	if (!mrq)
+		return;
+	cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
+
+	if (cmd->data && (cmd->error == 0) &&
+	    (cmd->data->error == 0)) {
+		if (s3cmci_host_usedma(host) && (!host->dma_complete)) {
+			dbg(host, dbg_dma, "DMA Missing (%d)!\n",
+			    host->dma_complete);
+			return;
+		}
+	}
+
+	/* Read response from controller. */
+	cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
+	cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
+	cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
+	cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);
+
+	writel(host->prescaler, host->base + S3C2410_SDIPRE);
+
+	if (cmd->error)
+		debug_as_failure = 1;
+
+	if (cmd->data && cmd->data->error)
+		debug_as_failure = 1;
+
+	dbg_dumpcmd(host, cmd, debug_as_failure);
+
+	/* Cleanup controller */
+	writel(0, host->base + S3C2410_SDICMDARG);
+	writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
+	writel(0, host->base + S3C2410_SDICMDCON);
+	clear_imask(host);
+
+	if (cmd->data && cmd->error)
+		cmd->data->error = cmd->error;
+
+	if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
+		host->cmd_is_stop = 1;
+		s3cmci_send_request(host->mmc);
+		return;
+	}
+
+	/* If we have no data transfer we are finished here */
+	if (!mrq->data)
+		goto request_done;
+
+	/* Calculate the amout of bytes transfer if there was no error */
+	if (mrq->data->error == 0) {
+		mrq->data->bytes_xfered =
+			(mrq->data->blocks * mrq->data->blksz);
+	} else {
+		mrq->data->bytes_xfered = 0;
+	}
+
+	/* If we had an error while transferring data we flush the
+	 * DMA channel and the fifo to clear out any garbage. */
+	if (mrq->data->error != 0) {
+		if (s3cmci_host_usedma(host))
+			dmaengine_terminate_all(host->dma);
+
+		if (host->is2440) {
+			/* Clear failure register and reset fifo. */
+			writel(S3C2440_SDIFSTA_FIFORESET |
+			       S3C2440_SDIFSTA_FIFOFAIL,
+			       host->base + S3C2410_SDIFSTA);
+		} else {
+			u32 mci_con;
+
+			/* reset fifo */
+			mci_con = readl(host->base + S3C2410_SDICON);
+			mci_con |= S3C2410_SDICON_FIFORESET;
+
+			writel(mci_con, host->base + S3C2410_SDICON);
+		}
+	}
+
+request_done:
+	host->complete_what = COMPLETION_NONE;
+	host->mrq = NULL;
+
+	s3cmci_check_sdio_irq(host);
+	mmc_request_done(host->mmc, mrq);
+}
+
+static void s3cmci_send_command(struct s3cmci_host *host,
+					struct mmc_command *cmd)
+{
+	u32 ccon, imsk;
+
+	imsk  = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT |
+		S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT |
+		S3C2410_SDIIMSK_RESPONSECRC;
+
+	enable_imask(host, imsk);
+
+	if (cmd->data)
+		host->complete_what = COMPLETION_XFERFINISH_RSPFIN;
+	else if (cmd->flags & MMC_RSP_PRESENT)
+		host->complete_what = COMPLETION_RSPFIN;
+	else
+		host->complete_what = COMPLETION_CMDSENT;
+
+	writel(cmd->arg, host->base + S3C2410_SDICMDARG);
+
+	ccon  = cmd->opcode & S3C2410_SDICMDCON_INDEX;
+	ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART;
+
+	if (cmd->flags & MMC_RSP_PRESENT)
+		ccon |= S3C2410_SDICMDCON_WAITRSP;
+
+	if (cmd->flags & MMC_RSP_136)
+		ccon |= S3C2410_SDICMDCON_LONGRSP;
+
+	writel(ccon, host->base + S3C2410_SDICMDCON);
+}
+
+static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
+{
+	u32 dcon, imsk, stoptries = 3;
+
+	/* write DCON register */
+
+	if (!data) {
+		writel(0, host->base + S3C2410_SDIDCON);
+		return 0;
+	}
+
+	if ((data->blksz & 3) != 0) {
+		/* We cannot deal with unaligned blocks with more than
+		 * one block being transferred. */
+
+		if (data->blocks > 1) {
+			pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n",
+				__func__, data->blksz);
+			return -EINVAL;
+		}
+	}
+
+	while (readl(host->base + S3C2410_SDIDSTA) &
+	       (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) {
+
+		dbg(host, dbg_err,
+		    "mci_setup_data() transfer stillin progress.\n");
+
+		writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
+		s3cmci_reset(host);
+
+		if ((stoptries--) == 0) {
+			dbg_dumpregs(host, "DRF");
+			return -EINVAL;
+		}
+	}
+
+	dcon  = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
+
+	if (s3cmci_host_usedma(host))
+		dcon |= S3C2410_SDIDCON_DMAEN;
+
+	if (host->bus_width == MMC_BUS_WIDTH_4)
+		dcon |= S3C2410_SDIDCON_WIDEBUS;
+
+	dcon |= S3C2410_SDIDCON_BLOCKMODE;
+
+	if (data->flags & MMC_DATA_WRITE) {
+		dcon |= S3C2410_SDIDCON_TXAFTERRESP;
+		dcon |= S3C2410_SDIDCON_XFER_TXSTART;
+	}
+
+	if (data->flags & MMC_DATA_READ) {
+		dcon |= S3C2410_SDIDCON_RXAFTERCMD;
+		dcon |= S3C2410_SDIDCON_XFER_RXSTART;
+	}
+
+	if (host->is2440) {
+		dcon |= S3C2440_SDIDCON_DS_WORD;
+		dcon |= S3C2440_SDIDCON_DATSTART;
+	}
+
+	writel(dcon, host->base + S3C2410_SDIDCON);
+
+	/* write BSIZE register */
+
+	writel(data->blksz, host->base + S3C2410_SDIBSIZE);
+
+	/* add to IMASK register */
+	imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC |
+	       S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH;
+
+	enable_imask(host, imsk);
+
+	/* write TIMER register */
+
+	if (host->is2440) {
+		writel(0x007FFFFF, host->base + S3C2410_SDITIMER);
+	} else {
+		writel(0x0000FFFF, host->base + S3C2410_SDITIMER);
+
+		/* FIX: set slow clock to prevent timeouts on read */
+		if (data->flags & MMC_DATA_READ)
+			writel(0xFF, host->base + S3C2410_SDIPRE);
+	}
+
+	return 0;
+}
+
+#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
+
+static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
+{
+	int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
+
+	BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
+
+	host->pio_sgptr = 0;
+	host->pio_bytes = 0;
+	host->pio_count = 0;
+	host->pio_active = rw ? XFER_WRITE : XFER_READ;
+
+	if (rw) {
+		do_pio_write(host);
+		enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
+	} else {
+		enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF
+			     | S3C2410_SDIIMSK_RXFIFOLAST);
+	}
+
+	return 0;
+}
+
+static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
+{
+	int rw = data->flags & MMC_DATA_WRITE;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_slave_config conf = {
+		.src_addr = host->mem->start + host->sdidata,
+		.dst_addr = host->mem->start + host->sdidata,
+		.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+		.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+	};
+
+	BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
+
+	/* Restore prescaler value */
+	writel(host->prescaler, host->base + S3C2410_SDIPRE);
+
+	if (!rw)
+		conf.direction = DMA_DEV_TO_MEM;
+	else
+		conf.direction = DMA_MEM_TO_DEV;
+
+	dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+		   mmc_get_dma_dir(data));
+
+	dmaengine_slave_config(host->dma, &conf);
+	desc = dmaengine_prep_slave_sg(host->dma, data->sg, data->sg_len,
+		conf.direction,
+		DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
+	if (!desc)
+		goto unmap_exit;
+	desc->callback = s3cmci_dma_done_callback;
+	desc->callback_param = host;
+	dmaengine_submit(desc);
+	dma_async_issue_pending(host->dma);
+
+	return 0;
+
+unmap_exit:
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+		     mmc_get_dma_dir(data));
+	return -ENOMEM;
+}
+
+static void s3cmci_send_request(struct mmc_host *mmc)
+{
+	struct s3cmci_host *host = mmc_priv(mmc);
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
+
+	host->ccnt++;
+	prepare_dbgmsg(host, cmd, host->cmd_is_stop);
+
+	/* Clear command, data and fifo status registers
+	   Fifo clear only necessary on 2440, but doesn't hurt on 2410
+	*/
+	writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT);
+	writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA);
+	writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA);
+
+	if (cmd->data) {
+		int res = s3cmci_setup_data(host, cmd->data);
+
+		host->dcnt++;
+
+		if (res) {
+			dbg(host, dbg_err, "setup data error %d\n", res);
+			cmd->error = res;
+			cmd->data->error = res;
+
+			mmc_request_done(mmc, mrq);
+			return;
+		}
+
+		if (s3cmci_host_usedma(host))
+			res = s3cmci_prepare_dma(host, cmd->data);
+		else
+			res = s3cmci_prepare_pio(host, cmd->data);
+
+		if (res) {
+			dbg(host, dbg_err, "data prepare error %d\n", res);
+			cmd->error = res;
+			cmd->data->error = res;
+
+			mmc_request_done(mmc, mrq);
+			return;
+		}
+	}
+
+	/* Send command */
+	s3cmci_send_command(host, cmd);
+
+	/* Enable Interrupt */
+	s3cmci_enable_irq(host, true);
+}
+
+static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct s3cmci_host *host = mmc_priv(mmc);
+
+	host->status = "mmc request";
+	host->cmd_is_stop = 0;
+	host->mrq = mrq;
+
+	if (mmc_gpio_get_cd(mmc) == 0) {
+		dbg(host, dbg_err, "%s: no medium present\n", __func__);
+		host->mrq->cmd->error = -ENOMEDIUM;
+		mmc_request_done(mmc, mrq);
+	} else
+		s3cmci_send_request(mmc);
+}
+
+static void s3cmci_set_clk(struct s3cmci_host *host, struct mmc_ios *ios)
+{
+	u32 mci_psc;
+
+	/* Set clock */
+	for (mci_psc = 0; mci_psc < 255; mci_psc++) {
+		host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1));
+
+		if (host->real_rate <= ios->clock)
+			break;
+	}
+
+	if (mci_psc > 255)
+		mci_psc = 255;
+
+	host->prescaler = mci_psc;
+	writel(host->prescaler, host->base + S3C2410_SDIPRE);
+
+	/* If requested clock is 0, real_rate will be 0, too */
+	if (ios->clock == 0)
+		host->real_rate = 0;
+}
+
+static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct s3cmci_host *host = mmc_priv(mmc);
+	u32 mci_con;
+
+	/* Set the power state */
+
+	mci_con = readl(host->base + S3C2410_SDICON);
+
+	switch (ios->power_mode) {
+	case MMC_POWER_ON:
+	case MMC_POWER_UP:
+		/* Configure GPE5...GPE10 pins in SD mode */
+		if (!host->pdev->dev.of_node)
+			s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+					      S3C_GPIO_PULL_NONE);
+
+		if (host->pdata->set_power)
+			host->pdata->set_power(ios->power_mode, ios->vdd);
+
+		if (!host->is2440)
+			mci_con |= S3C2410_SDICON_FIFORESET;
+
+		break;
+
+	case MMC_POWER_OFF:
+	default:
+		if (!host->pdev->dev.of_node)
+			gpio_direction_output(S3C2410_GPE(5), 0);
+
+		if (host->is2440)
+			mci_con |= S3C2440_SDICON_SDRESET;
+
+		if (host->pdata->set_power)
+			host->pdata->set_power(ios->power_mode, ios->vdd);
+
+		break;
+	}
+
+	s3cmci_set_clk(host, ios);
+
+	/* Set CLOCK_ENABLE */
+	if (ios->clock)
+		mci_con |= S3C2410_SDICON_CLOCKTYPE;
+	else
+		mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
+
+	writel(mci_con, host->base + S3C2410_SDICON);
+
+	if ((ios->power_mode == MMC_POWER_ON) ||
+	    (ios->power_mode == MMC_POWER_UP)) {
+		dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
+			host->real_rate/1000, ios->clock/1000);
+	} else {
+		dbg(host, dbg_conf, "powered down.\n");
+	}
+
+	host->bus_width = ios->bus_width;
+}
+
+static void s3cmci_reset(struct s3cmci_host *host)
+{
+	u32 con = readl(host->base + S3C2410_SDICON);
+
+	con |= S3C2440_SDICON_SDRESET;
+	writel(con, host->base + S3C2410_SDICON);
+}
+
+static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct s3cmci_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	u32 con;
+
+	local_irq_save(flags);
+
+	con = readl(host->base + S3C2410_SDICON);
+	host->sdio_irqen = enable;
+
+	if (enable == host->sdio_irqen)
+		goto same_state;
+
+	if (enable) {
+		con |= S3C2410_SDICON_SDIOIRQ;
+		enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
+
+		if (!host->irq_state && !host->irq_disabled) {
+			host->irq_state = true;
+			enable_irq(host->irq);
+		}
+	} else {
+		disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
+		con &= ~S3C2410_SDICON_SDIOIRQ;
+
+		if (!host->irq_enabled && host->irq_state) {
+			disable_irq_nosync(host->irq);
+			host->irq_state = false;
+		}
+	}
+
+	writel(con, host->base + S3C2410_SDICON);
+
+ same_state:
+	local_irq_restore(flags);
+
+	s3cmci_check_sdio_irq(host);
+}
+
+static const struct mmc_host_ops s3cmci_ops = {
+	.request	= s3cmci_request,
+	.set_ios	= s3cmci_set_ios,
+	.get_ro		= mmc_gpio_get_ro,
+	.get_cd		= mmc_gpio_get_cd,
+	.enable_sdio_irq = s3cmci_enable_sdio_irq,
+};
+
+static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
+	/* This is currently here to avoid a number of if (host->pdata)
+	 * checks. Any zero fields to ensure reasonable defaults are picked. */
+	 .no_wprotect = 1,
+	 .no_detect = 1,
+};
+
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
+
+static int s3cmci_cpufreq_transition(struct notifier_block *nb,
+				     unsigned long val, void *data)
+{
+	struct s3cmci_host *host;
+	struct mmc_host *mmc;
+	unsigned long newclk;
+	unsigned long flags;
+
+	host = container_of(nb, struct s3cmci_host, freq_transition);
+	newclk = clk_get_rate(host->clk);
+	mmc = host->mmc;
+
+	if ((val == CPUFREQ_PRECHANGE && newclk > host->clk_rate) ||
+	    (val == CPUFREQ_POSTCHANGE && newclk < host->clk_rate)) {
+		spin_lock_irqsave(&mmc->lock, flags);
+
+		host->clk_rate = newclk;
+
+		if (mmc->ios.power_mode != MMC_POWER_OFF &&
+		    mmc->ios.clock != 0)
+			s3cmci_set_clk(host, &mmc->ios);
+
+		spin_unlock_irqrestore(&mmc->lock, flags);
+	}
+
+	return 0;
+}
+
+static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
+{
+	host->freq_transition.notifier_call = s3cmci_cpufreq_transition;
+
+	return cpufreq_register_notifier(&host->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
+{
+	cpufreq_unregister_notifier(&host->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
+{
+	return 0;
+}
+
+static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
+{
+}
+#endif
+
+
+#ifdef CONFIG_DEBUG_FS
+
+static int s3cmci_state_show(struct seq_file *seq, void *v)
+{
+	struct s3cmci_host *host = seq->private;
+
+	seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base);
+	seq_printf(seq, "Clock rate = %ld\n", host->clk_rate);
+	seq_printf(seq, "Prescale = %d\n", host->prescaler);
+	seq_printf(seq, "is2440 = %d\n", host->is2440);
+	seq_printf(seq, "IRQ = %d\n", host->irq);
+	seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled);
+	seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled);
+	seq_printf(seq, "IRQ state = %d\n", host->irq_state);
+	seq_printf(seq, "CD IRQ = %d\n", host->irq_cd);
+	seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host));
+	seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk);
+	seq_printf(seq, "SDIDATA at %d\n", host->sdidata);
+
+	return 0;
+}
+
+static int s3cmci_state_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, s3cmci_state_show, inode->i_private);
+}
+
+static const struct file_operations s3cmci_fops_state = {
+	.owner		= THIS_MODULE,
+	.open		= s3cmci_state_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+#define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r }
+
+struct s3cmci_reg {
+	unsigned short	addr;
+	unsigned char	*name;
+};
+
+static const struct s3cmci_reg debug_regs[] = {
+	DBG_REG(CON),
+	DBG_REG(PRE),
+	DBG_REG(CMDARG),
+	DBG_REG(CMDCON),
+	DBG_REG(CMDSTAT),
+	DBG_REG(RSP0),
+	DBG_REG(RSP1),
+	DBG_REG(RSP2),
+	DBG_REG(RSP3),
+	DBG_REG(TIMER),
+	DBG_REG(BSIZE),
+	DBG_REG(DCON),
+	DBG_REG(DCNT),
+	DBG_REG(DSTA),
+	DBG_REG(FSTA),
+	{}
+};
+
+static int s3cmci_regs_show(struct seq_file *seq, void *v)
+{
+	struct s3cmci_host *host = seq->private;
+	const struct s3cmci_reg *rptr = debug_regs;
+
+	for (; rptr->name; rptr++)
+		seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name,
+			   readl(host->base + rptr->addr));
+
+	seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk));
+
+	return 0;
+}
+
+static int s3cmci_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, s3cmci_regs_show, inode->i_private);
+}
+
+static const struct file_operations s3cmci_fops_regs = {
+	.owner		= THIS_MODULE,
+	.open		= s3cmci_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void s3cmci_debugfs_attach(struct s3cmci_host *host)
+{
+	struct device *dev = &host->pdev->dev;
+
+	host->debug_root = debugfs_create_dir(dev_name(dev), NULL);
+	if (IS_ERR(host->debug_root)) {
+		dev_err(dev, "failed to create debugfs root\n");
+		return;
+	}
+
+	host->debug_state = debugfs_create_file("state", 0444,
+						host->debug_root, host,
+						&s3cmci_fops_state);
+
+	if (IS_ERR(host->debug_state))
+		dev_err(dev, "failed to create debug state file\n");
+
+	host->debug_regs = debugfs_create_file("regs", 0444,
+					       host->debug_root, host,
+					       &s3cmci_fops_regs);
+
+	if (IS_ERR(host->debug_regs))
+		dev_err(dev, "failed to create debug regs file\n");
+}
+
+static void s3cmci_debugfs_remove(struct s3cmci_host *host)
+{
+	debugfs_remove(host->debug_regs);
+	debugfs_remove(host->debug_state);
+	debugfs_remove(host->debug_root);
+}
+
+#else
+static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { }
+static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
+
+#endif /* CONFIG_DEBUG_FS */
+
+static int s3cmci_probe_pdata(struct s3cmci_host *host)
+{
+	struct platform_device *pdev = host->pdev;
+	struct mmc_host *mmc = host->mmc;
+	struct s3c24xx_mci_pdata *pdata;
+	int i, ret;
+
+	host->is2440 = platform_get_device_id(pdev)->driver_data;
+
+	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
+		ret = gpio_request(i, dev_name(&pdev->dev));
+		if (ret) {
+			dev_err(&pdev->dev, "failed to get gpio %d\n", i);
+
+			for (i--; i >= S3C2410_GPE(5); i--)
+				gpio_free(i);
+
+			return ret;
+		}
+	}
+
+	if (!pdev->dev.platform_data)
+		pdev->dev.platform_data = &s3cmci_def_pdata;
+
+	pdata = pdev->dev.platform_data;
+
+	if (pdata->no_wprotect)
+		mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
+
+	if (pdata->no_detect)
+		mmc->caps |= MMC_CAP_NEEDS_POLL;
+
+	if (pdata->wprotect_invert)
+		mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+
+	if (pdata->detect_invert)
+		 mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+
+	if (gpio_is_valid(pdata->gpio_detect)) {
+		ret = mmc_gpio_request_cd(mmc, pdata->gpio_detect, 0);
+		if (ret) {
+			dev_err(&pdev->dev, "error requesting GPIO for CD %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	if (gpio_is_valid(pdata->gpio_wprotect)) {
+		ret = mmc_gpio_request_ro(mmc, pdata->gpio_wprotect);
+		if (ret) {
+			dev_err(&pdev->dev, "error requesting GPIO for WP %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int s3cmci_probe_dt(struct s3cmci_host *host)
+{
+	struct platform_device *pdev = host->pdev;
+	struct s3c24xx_mci_pdata *pdata;
+	struct mmc_host *mmc = host->mmc;
+	int ret;
+
+	host->is2440 = (int) of_device_get_match_data(&pdev->dev);
+
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		return ret;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdev->dev.platform_data = pdata;
+
+	return 0;
+}
+
+static int s3cmci_probe(struct platform_device *pdev)
+{
+	struct s3cmci_host *host;
+	struct mmc_host	*mmc;
+	int ret;
+	int i;
+
+	mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto probe_out;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc 	= mmc;
+	host->pdev	= pdev;
+
+	if (pdev->dev.of_node)
+		ret = s3cmci_probe_dt(host);
+	else
+		ret = s3cmci_probe_pdata(host);
+
+	if (ret)
+		goto probe_free_host;
+
+	host->pdata = pdev->dev.platform_data;
+
+	spin_lock_init(&host->complete_lock);
+	tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
+
+	if (host->is2440) {
+		host->sdiimsk	= S3C2440_SDIIMSK;
+		host->sdidata	= S3C2440_SDIDATA;
+		host->clk_div	= 1;
+	} else {
+		host->sdiimsk	= S3C2410_SDIIMSK;
+		host->sdidata	= S3C2410_SDIDATA;
+		host->clk_div	= 2;
+	}
+
+	host->complete_what 	= COMPLETION_NONE;
+	host->pio_active 	= XFER_NONE;
+
+	host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!host->mem) {
+		dev_err(&pdev->dev,
+			"failed to get io memory region resource.\n");
+
+		ret = -ENOENT;
+		goto probe_free_gpio;
+	}
+
+	host->mem = request_mem_region(host->mem->start,
+				       resource_size(host->mem), pdev->name);
+
+	if (!host->mem) {
+		dev_err(&pdev->dev, "failed to request io memory region.\n");
+		ret = -ENOENT;
+		goto probe_free_gpio;
+	}
+
+	host->base = ioremap(host->mem->start, resource_size(host->mem));
+	if (!host->base) {
+		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
+		ret = -EINVAL;
+		goto probe_free_mem_region;
+	}
+
+	host->irq = platform_get_irq(pdev, 0);
+	if (host->irq <= 0) {
+		dev_err(&pdev->dev, "failed to get interrupt resource.\n");
+		ret = -EINVAL;
+		goto probe_iounmap;
+	}
+
+	if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) {
+		dev_err(&pdev->dev, "failed to request mci interrupt.\n");
+		ret = -ENOENT;
+		goto probe_iounmap;
+	}
+
+	/* We get spurious interrupts even when we have set the IMSK
+	 * register to ignore everything, so use disable_irq() to make
+	 * ensure we don't lock the system with un-serviceable requests. */
+
+	disable_irq(host->irq);
+	host->irq_state = false;
+
+	/* Depending on the dma state, get a DMA channel to use. */
+
+	if (s3cmci_host_usedma(host)) {
+		host->dma = dma_request_chan(&pdev->dev, "rx-tx");
+		ret = PTR_ERR_OR_ZERO(host->dma);
+		if (ret) {
+			dev_err(&pdev->dev, "cannot get DMA channel.\n");
+			goto probe_free_irq;
+		}
+	}
+
+	host->clk = clk_get(&pdev->dev, "sdi");
+	if (IS_ERR(host->clk)) {
+		dev_err(&pdev->dev, "failed to find clock source.\n");
+		ret = PTR_ERR(host->clk);
+		host->clk = NULL;
+		goto probe_free_dma;
+	}
+
+	ret = clk_prepare_enable(host->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock source.\n");
+		goto clk_free;
+	}
+
+	host->clk_rate = clk_get_rate(host->clk);
+
+	mmc->ops 	= &s3cmci_ops;
+	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
+#ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ
+	mmc->caps	= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+#else
+	mmc->caps	= MMC_CAP_4_BIT_DATA;
+#endif
+	mmc->f_min 	= host->clk_rate / (host->clk_div * 256);
+	mmc->f_max 	= host->clk_rate / host->clk_div;
+
+	if (host->pdata->ocr_avail)
+		mmc->ocr_avail = host->pdata->ocr_avail;
+
+	mmc->max_blk_count	= 4095;
+	mmc->max_blk_size	= 4095;
+	mmc->max_req_size	= 4095 * 512;
+	mmc->max_seg_size	= mmc->max_req_size;
+
+	mmc->max_segs		= 128;
+
+	dbg(host, dbg_debug,
+	    "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%p.\n",
+	    (host->is2440?"2440":""),
+	    host->base, host->irq, host->irq_cd, host->dma);
+
+	ret = s3cmci_cpufreq_register(host);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register cpufreq\n");
+		goto free_dmabuf;
+	}
+
+	ret = mmc_add_host(mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add mmc host.\n");
+		goto free_cpufreq;
+	}
+
+	s3cmci_debugfs_attach(host);
+
+	platform_set_drvdata(pdev, mmc);
+	dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc),
+		 s3cmci_host_usedma(host) ? "dma" : "pio",
+		 mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw");
+
+	return 0;
+
+ free_cpufreq:
+	s3cmci_cpufreq_deregister(host);
+
+ free_dmabuf:
+	clk_disable_unprepare(host->clk);
+
+ clk_free:
+	clk_put(host->clk);
+
+ probe_free_dma:
+	if (s3cmci_host_usedma(host))
+		dma_release_channel(host->dma);
+
+ probe_free_irq:
+	free_irq(host->irq, host);
+
+ probe_iounmap:
+	iounmap(host->base);
+
+ probe_free_mem_region:
+	release_mem_region(host->mem->start, resource_size(host->mem));
+
+ probe_free_gpio:
+	if (!pdev->dev.of_node)
+		for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+			gpio_free(i);
+
+ probe_free_host:
+	mmc_free_host(mmc);
+
+ probe_out:
+	return ret;
+}
+
+static void s3cmci_shutdown(struct platform_device *pdev)
+{
+	struct mmc_host	*mmc = platform_get_drvdata(pdev);
+	struct s3cmci_host *host = mmc_priv(mmc);
+
+	if (host->irq_cd >= 0)
+		free_irq(host->irq_cd, host);
+
+	s3cmci_debugfs_remove(host);
+	s3cmci_cpufreq_deregister(host);
+	mmc_remove_host(mmc);
+	clk_disable_unprepare(host->clk);
+}
+
+static int s3cmci_remove(struct platform_device *pdev)
+{
+	struct mmc_host		*mmc  = platform_get_drvdata(pdev);
+	struct s3cmci_host	*host = mmc_priv(mmc);
+	int i;
+
+	s3cmci_shutdown(pdev);
+
+	clk_put(host->clk);
+
+	tasklet_disable(&host->pio_tasklet);
+
+	if (s3cmci_host_usedma(host))
+		dma_release_channel(host->dma);
+
+	free_irq(host->irq, host);
+
+	if (!pdev->dev.of_node)
+		for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+			gpio_free(i);
+
+	iounmap(host->base);
+	release_mem_region(host->mem->start, resource_size(host->mem));
+
+	mmc_free_host(mmc);
+	return 0;
+}
+
+static const struct of_device_id s3cmci_dt_match[] = {
+	{
+		.compatible = "samsung,s3c2410-sdi",
+		.data = (void *)0,
+	},
+	{
+		.compatible = "samsung,s3c2412-sdi",
+		.data = (void *)1,
+	},
+	{
+		.compatible = "samsung,s3c2440-sdi",
+		.data = (void *)1,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, s3cmci_dt_match);
+
+static const struct platform_device_id s3cmci_driver_ids[] = {
+	{
+		.name	= "s3c2410-sdi",
+		.driver_data	= 0,
+	}, {
+		.name	= "s3c2412-sdi",
+		.driver_data	= 1,
+	}, {
+		.name	= "s3c2440-sdi",
+		.driver_data	= 1,
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
+
+static struct platform_driver s3cmci_driver = {
+	.driver	= {
+		.name	= "s3c-sdi",
+		.of_match_table = s3cmci_dt_match,
+	},
+	.id_table	= s3cmci_driver_ids,
+	.probe		= s3cmci_probe,
+	.remove		= s3cmci_remove,
+	.shutdown	= s3cmci_shutdown,
+};
+
+module_platform_driver(s3cmci_driver);
+
+MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");