Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1516 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
new file mode 100644
index 000000000..f8a4791e6
--- /dev/null
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -0,0 +1,1516 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Freescale eSDHC i.MX controller driver for the platform bus.
+ *
+ * derived from the OF-version.
+ *
+ * Copyright (c) 2010 Pengutronix e.K.
+ *   Author: Wolfram Sang <kernel@pengutronix.de>
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
+#include <linux/pm_runtime.h>
+#include <linux/iopoll.h>
+#include "sdhci-pltfm.h"
+#include "sdhci-esdhc.h"
+
+#define ESDHC_SYS_CTRL_DTOCV_MASK	0x0f
+#define	ESDHC_CTRL_D3CD			0x08
+#define ESDHC_BURST_LEN_EN_INCR		(1 << 27)
+/* VENDOR SPEC register */
+#define ESDHC_VENDOR_SPEC		0xc0
+#define  ESDHC_VENDOR_SPEC_SDIO_QUIRK	(1 << 1)
+#define  ESDHC_VENDOR_SPEC_VSELECT	(1 << 1)
+#define  ESDHC_VENDOR_SPEC_FRC_SDCLK_ON	(1 << 8)
+#define ESDHC_WTMK_LVL			0x44
+#define  ESDHC_WTMK_DEFAULT_VAL		0x10401040
+#define  ESDHC_WTMK_LVL_RD_WML_MASK	0x000000FF
+#define  ESDHC_WTMK_LVL_RD_WML_SHIFT	0
+#define  ESDHC_WTMK_LVL_WR_WML_MASK	0x00FF0000
+#define  ESDHC_WTMK_LVL_WR_WML_SHIFT	16
+#define  ESDHC_WTMK_LVL_WML_VAL_DEF	64
+#define  ESDHC_WTMK_LVL_WML_VAL_MAX	128
+#define ESDHC_MIX_CTRL			0x48
+#define  ESDHC_MIX_CTRL_DDREN		(1 << 3)
+#define  ESDHC_MIX_CTRL_AC23EN		(1 << 7)
+#define  ESDHC_MIX_CTRL_EXE_TUNE	(1 << 22)
+#define  ESDHC_MIX_CTRL_SMPCLK_SEL	(1 << 23)
+#define  ESDHC_MIX_CTRL_AUTO_TUNE_EN	(1 << 24)
+#define  ESDHC_MIX_CTRL_FBCLK_SEL	(1 << 25)
+#define  ESDHC_MIX_CTRL_HS400_EN	(1 << 26)
+/* Bits 3 and 6 are not SDHCI standard definitions */
+#define  ESDHC_MIX_CTRL_SDHCI_MASK	0xb7
+/* Tuning bits */
+#define  ESDHC_MIX_CTRL_TUNING_MASK	0x03c00000
+
+/* dll control register */
+#define ESDHC_DLL_CTRL			0x60
+#define ESDHC_DLL_OVERRIDE_VAL_SHIFT	9
+#define ESDHC_DLL_OVERRIDE_EN_SHIFT	8
+
+/* tune control register */
+#define ESDHC_TUNE_CTRL_STATUS		0x68
+#define  ESDHC_TUNE_CTRL_STEP		1
+#define  ESDHC_TUNE_CTRL_MIN		0
+#define  ESDHC_TUNE_CTRL_MAX		((1 << 7) - 1)
+
+/* strobe dll register */
+#define ESDHC_STROBE_DLL_CTRL		0x70
+#define ESDHC_STROBE_DLL_CTRL_ENABLE	(1 << 0)
+#define ESDHC_STROBE_DLL_CTRL_RESET	(1 << 1)
+#define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT	3
+
+#define ESDHC_STROBE_DLL_STATUS		0x74
+#define ESDHC_STROBE_DLL_STS_REF_LOCK	(1 << 1)
+#define ESDHC_STROBE_DLL_STS_SLV_LOCK	0x1
+
+#define ESDHC_TUNING_CTRL		0xcc
+#define ESDHC_STD_TUNING_EN		(1 << 24)
+/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
+#define ESDHC_TUNING_START_TAP_DEFAULT	0x1
+#define ESDHC_TUNING_START_TAP_MASK	0x7f
+#define ESDHC_TUNING_STEP_MASK		0x00070000
+#define ESDHC_TUNING_STEP_SHIFT		16
+
+/* pinctrl state */
+#define ESDHC_PINCTRL_STATE_100MHZ	"state_100mhz"
+#define ESDHC_PINCTRL_STATE_200MHZ	"state_200mhz"
+
+/*
+ * Our interpretation of the SDHCI_HOST_CONTROL register
+ */
+#define ESDHC_CTRL_4BITBUS		(0x1 << 1)
+#define ESDHC_CTRL_8BITBUS		(0x2 << 1)
+#define ESDHC_CTRL_BUSWIDTH_MASK	(0x3 << 1)
+
+/*
+ * There is an INT DMA ERR mismatch between eSDHC and STD SDHC SPEC:
+ * Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design,
+ * but bit28 is used as the INT DMA ERR in fsl eSDHC design.
+ * Define this macro DMA error INT for fsl eSDHC
+ */
+#define ESDHC_INT_VENDOR_SPEC_DMA_ERR	(1 << 28)
+
+/*
+ * The CMDTYPE of the CMD register (offset 0xE) should be set to
+ * "11" when the STOP CMD12 is issued on imx53 to abort one
+ * open ended multi-blk IO. Otherwise the TC INT wouldn't
+ * be generated.
+ * In exact block transfer, the controller doesn't complete the
+ * operations automatically as required at the end of the
+ * transfer and remains on hold if the abort command is not sent.
+ * As a result, the TC flag is not asserted and SW received timeout
+ * exception. Bit1 of Vendor Spec register is used to fix it.
+ */
+#define ESDHC_FLAG_MULTIBLK_NO_INT	BIT(1)
+/*
+ * The flag tells that the ESDHC controller is an USDHC block that is
+ * integrated on the i.MX6 series.
+ */
+#define ESDHC_FLAG_USDHC		BIT(3)
+/* The IP supports manual tuning process */
+#define ESDHC_FLAG_MAN_TUNING		BIT(4)
+/* The IP supports standard tuning process */
+#define ESDHC_FLAG_STD_TUNING		BIT(5)
+/* The IP has SDHCI_CAPABILITIES_1 register */
+#define ESDHC_FLAG_HAVE_CAP1		BIT(6)
+/*
+ * The IP has erratum ERR004536
+ * uSDHC: ADMA Length Mismatch Error occurs if the AHB read access is slow,
+ * when reading data from the card
+ * This flag is also set for i.MX25 and i.MX35 in order to get
+ * SDHCI_QUIRK_BROKEN_ADMA, but for different reasons (ADMA capability bits).
+ */
+#define ESDHC_FLAG_ERR004536		BIT(7)
+/* The IP supports HS200 mode */
+#define ESDHC_FLAG_HS200		BIT(8)
+/* The IP supports HS400 mode */
+#define ESDHC_FLAG_HS400		BIT(9)
+
+/* A clock frequency higher than this rate requires strobe dll control */
+#define ESDHC_STROBE_DLL_CLK_FREQ	100000000
+
+struct esdhc_soc_data {
+	u32 flags;
+};
+
+static struct esdhc_soc_data esdhc_imx25_data = {
+	.flags = ESDHC_FLAG_ERR004536,
+};
+
+static struct esdhc_soc_data esdhc_imx35_data = {
+	.flags = ESDHC_FLAG_ERR004536,
+};
+
+static struct esdhc_soc_data esdhc_imx51_data = {
+	.flags = 0,
+};
+
+static struct esdhc_soc_data esdhc_imx53_data = {
+	.flags = ESDHC_FLAG_MULTIBLK_NO_INT,
+};
+
+static struct esdhc_soc_data usdhc_imx6q_data = {
+	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING,
+};
+
+static struct esdhc_soc_data usdhc_imx6sl_data = {
+	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
+			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_ERR004536
+			| ESDHC_FLAG_HS200,
+};
+
+static struct esdhc_soc_data usdhc_imx6sx_data = {
+	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
+			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200,
+};
+
+static struct esdhc_soc_data usdhc_imx7d_data = {
+	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
+			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
+			| ESDHC_FLAG_HS400,
+};
+
+struct pltfm_imx_data {
+	u32 scratchpad;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pins_default;
+	struct pinctrl_state *pins_100mhz;
+	struct pinctrl_state *pins_200mhz;
+	const struct esdhc_soc_data *socdata;
+	struct esdhc_platform_data boarddata;
+	struct clk *clk_ipg;
+	struct clk *clk_ahb;
+	struct clk *clk_per;
+	unsigned int actual_clock;
+	enum {
+		NO_CMD_PENDING,      /* no multiblock command pending */
+		MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */
+		WAIT_FOR_INT,        /* sent CMD12, waiting for response INT */
+	} multiblock_status;
+	u32 is_ddr;
+};
+
+static const struct platform_device_id imx_esdhc_devtype[] = {
+	{
+		.name = "sdhci-esdhc-imx25",
+		.driver_data = (kernel_ulong_t) &esdhc_imx25_data,
+	}, {
+		.name = "sdhci-esdhc-imx35",
+		.driver_data = (kernel_ulong_t) &esdhc_imx35_data,
+	}, {
+		.name = "sdhci-esdhc-imx51",
+		.driver_data = (kernel_ulong_t) &esdhc_imx51_data,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, imx_esdhc_devtype);
+
+static const struct of_device_id imx_esdhc_dt_ids[] = {
+	{ .compatible = "fsl,imx25-esdhc", .data = &esdhc_imx25_data, },
+	{ .compatible = "fsl,imx35-esdhc", .data = &esdhc_imx35_data, },
+	{ .compatible = "fsl,imx51-esdhc", .data = &esdhc_imx51_data, },
+	{ .compatible = "fsl,imx53-esdhc", .data = &esdhc_imx53_data, },
+	{ .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data, },
+	{ .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data, },
+	{ .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, },
+	{ .compatible = "fsl,imx7d-usdhc", .data = &usdhc_imx7d_data, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids);
+
+static inline int is_imx25_esdhc(struct pltfm_imx_data *data)
+{
+	return data->socdata == &esdhc_imx25_data;
+}
+
+static inline int is_imx53_esdhc(struct pltfm_imx_data *data)
+{
+	return data->socdata == &esdhc_imx53_data;
+}
+
+static inline int is_imx6q_usdhc(struct pltfm_imx_data *data)
+{
+	return data->socdata == &usdhc_imx6q_data;
+}
+
+static inline int esdhc_is_usdhc(struct pltfm_imx_data *data)
+{
+	return !!(data->socdata->flags & ESDHC_FLAG_USDHC);
+}
+
+static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
+{
+	void __iomem *base = host->ioaddr + (reg & ~0x3);
+	u32 shift = (reg & 0x3) * 8;
+
+	writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
+}
+
+static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	u32 val = readl(host->ioaddr + reg);
+
+	if (unlikely(reg == SDHCI_PRESENT_STATE)) {
+		u32 fsl_prss = val;
+		/* save the least 20 bits */
+		val = fsl_prss & 0x000FFFFF;
+		/* move dat[0-3] bits */
+		val |= (fsl_prss & 0x0F000000) >> 4;
+		/* move cmd line bit */
+		val |= (fsl_prss & 0x00800000) << 1;
+	}
+
+	if (unlikely(reg == SDHCI_CAPABILITIES)) {
+		/* ignore bit[0-15] as it stores cap_1 register val for mx6sl */
+		if (imx_data->socdata->flags & ESDHC_FLAG_HAVE_CAP1)
+			val &= 0xffff0000;
+
+		/* In FSL esdhc IC module, only bit20 is used to indicate the
+		 * ADMA2 capability of esdhc, but this bit is messed up on
+		 * some SOCs (e.g. on MX25, MX35 this bit is set, but they
+		 * don't actually support ADMA2). So set the BROKEN_ADMA
+		 * quirk on MX25/35 platforms.
+		 */
+
+		if (val & SDHCI_CAN_DO_ADMA1) {
+			val &= ~SDHCI_CAN_DO_ADMA1;
+			val |= SDHCI_CAN_DO_ADMA2;
+		}
+	}
+
+	if (unlikely(reg == SDHCI_CAPABILITIES_1)) {
+		if (esdhc_is_usdhc(imx_data)) {
+			if (imx_data->socdata->flags & ESDHC_FLAG_HAVE_CAP1)
+				val = readl(host->ioaddr + SDHCI_CAPABILITIES) & 0xFFFF;
+			else
+				/* imx6q/dl does not have cap_1 register, fake one */
+				val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104
+					| SDHCI_SUPPORT_SDR50
+					| SDHCI_USE_SDR50_TUNING
+					| (SDHCI_TUNING_MODE_3 << SDHCI_RETUNING_MODE_SHIFT);
+
+			if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
+				val |= SDHCI_SUPPORT_HS400;
+
+			/*
+			 * Do not advertise faster UHS modes if there are no
+			 * pinctrl states for 100MHz/200MHz.
+			 */
+			if (IS_ERR_OR_NULL(imx_data->pins_100mhz) ||
+			    IS_ERR_OR_NULL(imx_data->pins_200mhz))
+				val &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50
+					 | SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_HS400);
+		}
+	}
+
+	if (unlikely(reg == SDHCI_MAX_CURRENT) && esdhc_is_usdhc(imx_data)) {
+		val = 0;
+		val |= 0xFF << SDHCI_MAX_CURRENT_330_SHIFT;
+		val |= 0xFF << SDHCI_MAX_CURRENT_300_SHIFT;
+		val |= 0xFF << SDHCI_MAX_CURRENT_180_SHIFT;
+	}
+
+	if (unlikely(reg == SDHCI_INT_STATUS)) {
+		if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) {
+			val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR;
+			val |= SDHCI_INT_ADMA_ERROR;
+		}
+
+		/*
+		 * mask off the interrupt we get in response to the manually
+		 * sent CMD12
+		 */
+		if ((imx_data->multiblock_status == WAIT_FOR_INT) &&
+		    ((val & SDHCI_INT_RESPONSE) == SDHCI_INT_RESPONSE)) {
+			val &= ~SDHCI_INT_RESPONSE;
+			writel(SDHCI_INT_RESPONSE, host->ioaddr +
+						   SDHCI_INT_STATUS);
+			imx_data->multiblock_status = NO_CMD_PENDING;
+		}
+	}
+
+	return val;
+}
+
+static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	u32 data;
+
+	if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE ||
+			reg == SDHCI_INT_STATUS)) {
+		if ((val & SDHCI_INT_CARD_INT) && !esdhc_is_usdhc(imx_data)) {
+			/*
+			 * Clear and then set D3CD bit to avoid missing the
+			 * card interrupt. This is an eSDHC controller problem
+			 * so we need to apply the following workaround: clear
+			 * and set D3CD bit will make eSDHC re-sample the card
+			 * interrupt. In case a card interrupt was lost,
+			 * re-sample it by the following steps.
+			 */
+			data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
+			data &= ~ESDHC_CTRL_D3CD;
+			writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+			data |= ESDHC_CTRL_D3CD;
+			writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+		}
+
+		if (val & SDHCI_INT_ADMA_ERROR) {
+			val &= ~SDHCI_INT_ADMA_ERROR;
+			val |= ESDHC_INT_VENDOR_SPEC_DMA_ERR;
+		}
+	}
+
+	if (unlikely((imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
+				&& (reg == SDHCI_INT_STATUS)
+				&& (val & SDHCI_INT_DATA_END))) {
+			u32 v;
+			v = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
+			v &= ~ESDHC_VENDOR_SPEC_SDIO_QUIRK;
+			writel(v, host->ioaddr + ESDHC_VENDOR_SPEC);
+
+			if (imx_data->multiblock_status == MULTIBLK_IN_PROCESS)
+			{
+				/* send a manual CMD12 with RESPTYP=none */
+				data = MMC_STOP_TRANSMISSION << 24 |
+				       SDHCI_CMD_ABORTCMD << 16;
+				writel(data, host->ioaddr + SDHCI_TRANSFER_MODE);
+				imx_data->multiblock_status = WAIT_FOR_INT;
+			}
+	}
+
+	writel(val, host->ioaddr + reg);
+}
+
+static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	u16 ret = 0;
+	u32 val;
+
+	if (unlikely(reg == SDHCI_HOST_VERSION)) {
+		reg ^= 2;
+		if (esdhc_is_usdhc(imx_data)) {
+			/*
+			 * The usdhc register returns a wrong host version.
+			 * Correct it here.
+			 */
+			return SDHCI_SPEC_300;
+		}
+	}
+
+	if (unlikely(reg == SDHCI_HOST_CONTROL2)) {
+		val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
+		if (val & ESDHC_VENDOR_SPEC_VSELECT)
+			ret |= SDHCI_CTRL_VDD_180;
+
+		if (esdhc_is_usdhc(imx_data)) {
+			if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
+				val = readl(host->ioaddr + ESDHC_MIX_CTRL);
+			else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING)
+				/* the std tuning bits is in ACMD12_ERR for imx6sl */
+				val = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS);
+		}
+
+		if (val & ESDHC_MIX_CTRL_EXE_TUNE)
+			ret |= SDHCI_CTRL_EXEC_TUNING;
+		if (val & ESDHC_MIX_CTRL_SMPCLK_SEL)
+			ret |= SDHCI_CTRL_TUNED_CLK;
+
+		ret &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
+
+		return ret;
+	}
+
+	if (unlikely(reg == SDHCI_TRANSFER_MODE)) {
+		if (esdhc_is_usdhc(imx_data)) {
+			u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
+			ret = m & ESDHC_MIX_CTRL_SDHCI_MASK;
+			/* Swap AC23 bit */
+			if (m & ESDHC_MIX_CTRL_AC23EN) {
+				ret &= ~ESDHC_MIX_CTRL_AC23EN;
+				ret |= SDHCI_TRNS_AUTO_CMD23;
+			}
+		} else {
+			ret = readw(host->ioaddr + SDHCI_TRANSFER_MODE);
+		}
+
+		return ret;
+	}
+
+	return readw(host->ioaddr + reg);
+}
+
+static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	u32 new_val = 0;
+
+	switch (reg) {
+	case SDHCI_CLOCK_CONTROL:
+		new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
+		if (val & SDHCI_CLOCK_CARD_EN)
+			new_val |= ESDHC_VENDOR_SPEC_FRC_SDCLK_ON;
+		else
+			new_val &= ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON;
+		writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
+		return;
+	case SDHCI_HOST_CONTROL2:
+		new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
+		if (val & SDHCI_CTRL_VDD_180)
+			new_val |= ESDHC_VENDOR_SPEC_VSELECT;
+		else
+			new_val &= ~ESDHC_VENDOR_SPEC_VSELECT;
+		writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
+		if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) {
+			new_val = readl(host->ioaddr + ESDHC_MIX_CTRL);
+			if (val & SDHCI_CTRL_TUNED_CLK) {
+				new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL;
+				new_val |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
+			} else {
+				new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
+				new_val &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN;
+			}
+			writel(new_val , host->ioaddr + ESDHC_MIX_CTRL);
+		} else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
+			u32 v = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS);
+			u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
+			if (val & SDHCI_CTRL_TUNED_CLK) {
+				v |= ESDHC_MIX_CTRL_SMPCLK_SEL;
+			} else {
+				v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
+				m &= ~ESDHC_MIX_CTRL_FBCLK_SEL;
+				m &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN;
+			}
+
+			if (val & SDHCI_CTRL_EXEC_TUNING) {
+				v |= ESDHC_MIX_CTRL_EXE_TUNE;
+				m |= ESDHC_MIX_CTRL_FBCLK_SEL;
+				m |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
+			} else {
+				v &= ~ESDHC_MIX_CTRL_EXE_TUNE;
+			}
+
+			writel(v, host->ioaddr + SDHCI_AUTO_CMD_STATUS);
+			writel(m, host->ioaddr + ESDHC_MIX_CTRL);
+		}
+		return;
+	case SDHCI_TRANSFER_MODE:
+		if ((imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
+				&& (host->cmd->opcode == SD_IO_RW_EXTENDED)
+				&& (host->cmd->data->blocks > 1)
+				&& (host->cmd->data->flags & MMC_DATA_READ)) {
+			u32 v;
+			v = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
+			v |= ESDHC_VENDOR_SPEC_SDIO_QUIRK;
+			writel(v, host->ioaddr + ESDHC_VENDOR_SPEC);
+		}
+
+		if (esdhc_is_usdhc(imx_data)) {
+			u32 wml;
+			u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
+			/* Swap AC23 bit */
+			if (val & SDHCI_TRNS_AUTO_CMD23) {
+				val &= ~SDHCI_TRNS_AUTO_CMD23;
+				val |= ESDHC_MIX_CTRL_AC23EN;
+			}
+			m = val | (m & ~ESDHC_MIX_CTRL_SDHCI_MASK);
+			writel(m, host->ioaddr + ESDHC_MIX_CTRL);
+
+			/* Set watermark levels for PIO access to maximum value
+			 * (128 words) to accommodate full 512 bytes buffer.
+			 * For DMA access restore the levels to default value.
+			 */
+			m = readl(host->ioaddr + ESDHC_WTMK_LVL);
+			if (val & SDHCI_TRNS_DMA)
+				wml = ESDHC_WTMK_LVL_WML_VAL_DEF;
+			else
+				wml = ESDHC_WTMK_LVL_WML_VAL_MAX;
+			m &= ~(ESDHC_WTMK_LVL_RD_WML_MASK |
+			       ESDHC_WTMK_LVL_WR_WML_MASK);
+			m |= (wml << ESDHC_WTMK_LVL_RD_WML_SHIFT) |
+			     (wml << ESDHC_WTMK_LVL_WR_WML_SHIFT);
+			writel(m, host->ioaddr + ESDHC_WTMK_LVL);
+		} else {
+			/*
+			 * Postpone this write, we must do it together with a
+			 * command write that is down below.
+			 */
+			imx_data->scratchpad = val;
+		}
+		return;
+	case SDHCI_COMMAND:
+		if (host->cmd->opcode == MMC_STOP_TRANSMISSION)
+			val |= SDHCI_CMD_ABORTCMD;
+
+		if ((host->cmd->opcode == MMC_SET_BLOCK_COUNT) &&
+		    (imx_data->socdata->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
+			imx_data->multiblock_status = MULTIBLK_IN_PROCESS;
+
+		if (esdhc_is_usdhc(imx_data))
+			writel(val << 16,
+			       host->ioaddr + SDHCI_TRANSFER_MODE);
+		else
+			writel(val << 16 | imx_data->scratchpad,
+			       host->ioaddr + SDHCI_TRANSFER_MODE);
+		return;
+	case SDHCI_BLOCK_SIZE:
+		val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
+		break;
+	}
+	esdhc_clrset_le(host, 0xffff, val, reg);
+}
+
+static u8 esdhc_readb_le(struct sdhci_host *host, int reg)
+{
+	u8 ret;
+	u32 val;
+
+	switch (reg) {
+	case SDHCI_HOST_CONTROL:
+		val = readl(host->ioaddr + reg);
+
+		ret = val & SDHCI_CTRL_LED;
+		ret |= (val >> 5) & SDHCI_CTRL_DMA_MASK;
+		ret |= (val & ESDHC_CTRL_4BITBUS);
+		ret |= (val & ESDHC_CTRL_8BITBUS) << 3;
+		return ret;
+	}
+
+	return readb(host->ioaddr + reg);
+}
+
+static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	u32 new_val = 0;
+	u32 mask;
+
+	switch (reg) {
+	case SDHCI_POWER_CONTROL:
+		/*
+		 * FSL put some DMA bits here
+		 * If your board has a regulator, code should be here
+		 */
+		return;
+	case SDHCI_HOST_CONTROL:
+		/* FSL messed up here, so we need to manually compose it. */
+		new_val = val & SDHCI_CTRL_LED;
+		/* ensure the endianness */
+		new_val |= ESDHC_HOST_CONTROL_LE;
+		/* bits 8&9 are reserved on mx25 */
+		if (!is_imx25_esdhc(imx_data)) {
+			/* DMA mode bits are shifted */
+			new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
+		}
+
+		/*
+		 * Do not touch buswidth bits here. This is done in
+		 * esdhc_pltfm_bus_width.
+		 * Do not touch the D3CD bit either which is used for the
+		 * SDIO interrupt erratum workaround.
+		 */
+		mask = 0xffff & ~(ESDHC_CTRL_BUSWIDTH_MASK | ESDHC_CTRL_D3CD);
+
+		esdhc_clrset_le(host, mask, new_val, reg);
+		return;
+	case SDHCI_SOFTWARE_RESET:
+		if (val & SDHCI_RESET_DATA)
+			new_val = readl(host->ioaddr + SDHCI_HOST_CONTROL);
+		break;
+	}
+	esdhc_clrset_le(host, 0xff, val, reg);
+
+	if (reg == SDHCI_SOFTWARE_RESET) {
+		if (val & SDHCI_RESET_ALL) {
+			/*
+			 * The esdhc has a design violation to SDHC spec which
+			 * tells that software reset should not affect card
+			 * detection circuit. But esdhc clears its SYSCTL
+			 * register bits [0..2] during the software reset. This
+			 * will stop those clocks that card detection circuit
+			 * relies on. To work around it, we turn the clocks on
+			 * back to keep card detection circuit functional.
+			 */
+			esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL);
+			/*
+			 * The reset on usdhc fails to clear MIX_CTRL register.
+			 * Do it manually here.
+			 */
+			if (esdhc_is_usdhc(imx_data)) {
+				/*
+				 * the tuning bits should be kept during reset
+				 */
+				new_val = readl(host->ioaddr + ESDHC_MIX_CTRL);
+				writel(new_val & ESDHC_MIX_CTRL_TUNING_MASK,
+						host->ioaddr + ESDHC_MIX_CTRL);
+				imx_data->is_ddr = 0;
+			}
+		} else if (val & SDHCI_RESET_DATA) {
+			/*
+			 * The eSDHC DAT line software reset clears at least the
+			 * data transfer width on i.MX25, so make sure that the
+			 * Host Control register is unaffected.
+			 */
+			esdhc_clrset_le(host, 0xff, new_val,
+					SDHCI_HOST_CONTROL);
+		}
+	}
+}
+
+static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return pltfm_host->clock;
+}
+
+static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return pltfm_host->clock / 256 / 16;
+}
+
+static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
+					 unsigned int clock)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	unsigned int host_clock = pltfm_host->clock;
+	int ddr_pre_div = imx_data->is_ddr ? 2 : 1;
+	int pre_div = 1;
+	int div = 1;
+	u32 temp, val;
+
+	if (esdhc_is_usdhc(imx_data)) {
+		val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
+		writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
+			host->ioaddr + ESDHC_VENDOR_SPEC);
+	}
+
+	if (clock == 0) {
+		host->mmc->actual_clock = 0;
+		return;
+	}
+
+	/* For i.MX53 eSDHCv3, SYSCTL.SDCLKFS may not be set to 0. */
+	if (is_imx53_esdhc(imx_data)) {
+		/*
+		 * According to the i.MX53 reference manual, if DLLCTRL[10] can
+		 * be set, then the controller is eSDHCv3, else it is eSDHCv2.
+		 */
+		val = readl(host->ioaddr + ESDHC_DLL_CTRL);
+		writel(val | BIT(10), host->ioaddr + ESDHC_DLL_CTRL);
+		temp = readl(host->ioaddr + ESDHC_DLL_CTRL);
+		writel(val, host->ioaddr + ESDHC_DLL_CTRL);
+		if (temp & BIT(10))
+			pre_div = 2;
+	}
+
+	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+	temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
+		| ESDHC_CLOCK_MASK);
+	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+
+	while (host_clock / (16 * pre_div * ddr_pre_div) > clock &&
+			pre_div < 256)
+		pre_div *= 2;
+
+	while (host_clock / (div * pre_div * ddr_pre_div) > clock && div < 16)
+		div++;
+
+	host->mmc->actual_clock = host_clock / (div * pre_div * ddr_pre_div);
+	dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
+		clock, host->mmc->actual_clock);
+
+	pre_div >>= 1;
+	div--;
+
+	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+	temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
+		| (div << ESDHC_DIVIDER_SHIFT)
+		| (pre_div << ESDHC_PREDIV_SHIFT));
+	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+
+	if (esdhc_is_usdhc(imx_data)) {
+		val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
+		writel(val | ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
+			host->ioaddr + ESDHC_VENDOR_SPEC);
+	}
+
+	mdelay(1);
+}
+
+static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
+
+	switch (boarddata->wp_type) {
+	case ESDHC_WP_GPIO:
+		return mmc_gpio_get_ro(host->mmc);
+	case ESDHC_WP_CONTROLLER:
+		return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
+			       SDHCI_WRITE_PROTECT);
+	case ESDHC_WP_NONE:
+		break;
+	}
+
+	return -ENOSYS;
+}
+
+static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
+{
+	u32 ctrl;
+
+	switch (width) {
+	case MMC_BUS_WIDTH_8:
+		ctrl = ESDHC_CTRL_8BITBUS;
+		break;
+	case MMC_BUS_WIDTH_4:
+		ctrl = ESDHC_CTRL_4BITBUS;
+		break;
+	default:
+		ctrl = 0;
+		break;
+	}
+
+	esdhc_clrset_le(host, ESDHC_CTRL_BUSWIDTH_MASK, ctrl,
+			SDHCI_HOST_CONTROL);
+}
+
+static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
+{
+	u32 reg;
+
+	/* FIXME: delay a bit for card to be ready for next tuning due to errors */
+	mdelay(1);
+
+	reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
+	reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL |
+			ESDHC_MIX_CTRL_FBCLK_SEL;
+	writel(reg, host->ioaddr + ESDHC_MIX_CTRL);
+	writel(val << 8, host->ioaddr + ESDHC_TUNE_CTRL_STATUS);
+	dev_dbg(mmc_dev(host->mmc),
+		"tuning with delay 0x%x ESDHC_TUNE_CTRL_STATUS 0x%x\n",
+			val, readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS));
+}
+
+static void esdhc_post_tuning(struct sdhci_host *host)
+{
+	u32 reg;
+
+	reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
+	reg &= ~ESDHC_MIX_CTRL_EXE_TUNE;
+	reg |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
+	writel(reg, host->ioaddr + ESDHC_MIX_CTRL);
+}
+
+static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
+{
+	int min, max, avg, ret;
+
+	/* find the mininum delay first which can pass tuning */
+	min = ESDHC_TUNE_CTRL_MIN;
+	while (min < ESDHC_TUNE_CTRL_MAX) {
+		esdhc_prepare_tuning(host, min);
+		if (!mmc_send_tuning(host->mmc, opcode, NULL))
+			break;
+		min += ESDHC_TUNE_CTRL_STEP;
+	}
+
+	/* find the maxinum delay which can not pass tuning */
+	max = min + ESDHC_TUNE_CTRL_STEP;
+	while (max < ESDHC_TUNE_CTRL_MAX) {
+		esdhc_prepare_tuning(host, max);
+		if (mmc_send_tuning(host->mmc, opcode, NULL)) {
+			max -= ESDHC_TUNE_CTRL_STEP;
+			break;
+		}
+		max += ESDHC_TUNE_CTRL_STEP;
+	}
+
+	/* use average delay to get the best timing */
+	avg = (min + max) / 2;
+	esdhc_prepare_tuning(host, avg);
+	ret = mmc_send_tuning(host->mmc, opcode, NULL);
+	esdhc_post_tuning(host);
+
+	dev_dbg(mmc_dev(host->mmc), "tuning %s at 0x%x ret %d\n",
+		ret ? "failed" : "passed", avg, ret);
+
+	return ret;
+}
+
+static int esdhc_change_pinstate(struct sdhci_host *host,
+						unsigned int uhs)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	struct pinctrl_state *pinctrl;
+
+	dev_dbg(mmc_dev(host->mmc), "change pinctrl state for uhs %d\n", uhs);
+
+	if (IS_ERR(imx_data->pinctrl) ||
+		IS_ERR(imx_data->pins_default) ||
+		IS_ERR(imx_data->pins_100mhz) ||
+		IS_ERR(imx_data->pins_200mhz))
+		return -EINVAL;
+
+	switch (uhs) {
+	case MMC_TIMING_UHS_SDR50:
+	case MMC_TIMING_UHS_DDR50:
+		pinctrl = imx_data->pins_100mhz;
+		break;
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
+	case MMC_TIMING_MMC_HS400:
+		pinctrl = imx_data->pins_200mhz;
+		break;
+	default:
+		/* back to default state for other legacy timing */
+		pinctrl = imx_data->pins_default;
+	}
+
+	return pinctrl_select_state(imx_data->pinctrl, pinctrl);
+}
+
+/*
+ * For HS400 eMMC, there is a data_strobe line. This signal is generated
+ * by the device and used for data output and CRC status response output
+ * in HS400 mode. The frequency of this signal follows the frequency of
+ * CLK generated by host. The host receives the data which is aligned to the
+ * edge of data_strobe line. Due to the time delay between CLK line and
+ * data_strobe line, if the delay time is larger than one clock cycle,
+ * then CLK and data_strobe line will be misaligned, read error shows up.
+ * So when the CLK is higher than 100MHz, each clock cycle is short enough,
+ * host should configure the delay target.
+ */
+static void esdhc_set_strobe_dll(struct sdhci_host *host)
+{
+	u32 v;
+
+	if (host->mmc->actual_clock > ESDHC_STROBE_DLL_CLK_FREQ) {
+		/* disable clock before enabling strobe dll */
+		writel(readl(host->ioaddr + ESDHC_VENDOR_SPEC) &
+		       ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
+		       host->ioaddr + ESDHC_VENDOR_SPEC);
+
+		/* force a reset on strobe dll */
+		writel(ESDHC_STROBE_DLL_CTRL_RESET,
+			host->ioaddr + ESDHC_STROBE_DLL_CTRL);
+		/*
+		 * enable strobe dll ctrl and adjust the delay target
+		 * for the uSDHC loopback read clock
+		 */
+		v = ESDHC_STROBE_DLL_CTRL_ENABLE |
+			(7 << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT);
+		writel(v, host->ioaddr + ESDHC_STROBE_DLL_CTRL);
+		/* wait 1us to make sure strobe dll status register stable */
+		udelay(1);
+		v = readl(host->ioaddr + ESDHC_STROBE_DLL_STATUS);
+		if (!(v & ESDHC_STROBE_DLL_STS_REF_LOCK))
+			dev_warn(mmc_dev(host->mmc),
+				"warning! HS400 strobe DLL status REF not lock!\n");
+		if (!(v & ESDHC_STROBE_DLL_STS_SLV_LOCK))
+			dev_warn(mmc_dev(host->mmc),
+				"warning! HS400 strobe DLL status SLV not lock!\n");
+	}
+}
+
+static void esdhc_reset_tuning(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	u32 ctrl;
+	int ret;
+
+	/* Reset the tuning circuit */
+	if (esdhc_is_usdhc(imx_data)) {
+		if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) {
+			ctrl = readl(host->ioaddr + ESDHC_MIX_CTRL);
+			ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
+			ctrl &= ~ESDHC_MIX_CTRL_FBCLK_SEL;
+			writel(ctrl, host->ioaddr + ESDHC_MIX_CTRL);
+			writel(0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS);
+		} else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
+			ctrl = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS);
+			ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
+			ctrl &= ~ESDHC_MIX_CTRL_EXE_TUNE;
+			writel(ctrl, host->ioaddr + SDHCI_AUTO_CMD_STATUS);
+			/* Make sure ESDHC_MIX_CTRL_EXE_TUNE cleared */
+			ret = readl_poll_timeout(host->ioaddr + SDHCI_AUTO_CMD_STATUS,
+				ctrl, !(ctrl & ESDHC_MIX_CTRL_EXE_TUNE), 1, 50);
+			if (ret == -ETIMEDOUT)
+				dev_warn(mmc_dev(host->mmc),
+				 "Warning! clear execute tuning bit failed\n");
+			/*
+			 * SDHCI_INT_DATA_AVAIL is W1C bit, set this bit will clear the
+			 * usdhc IP internal logic flag execute_tuning_with_clr_buf, which
+			 * will finally make sure the normal data transfer logic correct.
+			 */
+			ctrl = readl(host->ioaddr + SDHCI_INT_STATUS);
+			ctrl |= SDHCI_INT_DATA_AVAIL;
+			writel(ctrl, host->ioaddr + SDHCI_INT_STATUS);
+		}
+	}
+}
+
+static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
+{
+	u32 m;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
+
+	/* disable ddr mode and disable HS400 mode */
+	m = readl(host->ioaddr + ESDHC_MIX_CTRL);
+	m &= ~(ESDHC_MIX_CTRL_DDREN | ESDHC_MIX_CTRL_HS400_EN);
+	imx_data->is_ddr = 0;
+
+	switch (timing) {
+	case MMC_TIMING_UHS_SDR12:
+	case MMC_TIMING_UHS_SDR25:
+	case MMC_TIMING_UHS_SDR50:
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS:
+	case MMC_TIMING_MMC_HS200:
+		writel(m, host->ioaddr + ESDHC_MIX_CTRL);
+		break;
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_MMC_DDR52:
+		m |= ESDHC_MIX_CTRL_DDREN;
+		writel(m, host->ioaddr + ESDHC_MIX_CTRL);
+		imx_data->is_ddr = 1;
+		if (boarddata->delay_line) {
+			u32 v;
+			v = boarddata->delay_line <<
+				ESDHC_DLL_OVERRIDE_VAL_SHIFT |
+				(1 << ESDHC_DLL_OVERRIDE_EN_SHIFT);
+			if (is_imx53_esdhc(imx_data))
+				v <<= 1;
+			writel(v, host->ioaddr + ESDHC_DLL_CTRL);
+		}
+		break;
+	case MMC_TIMING_MMC_HS400:
+		m |= ESDHC_MIX_CTRL_DDREN | ESDHC_MIX_CTRL_HS400_EN;
+		writel(m, host->ioaddr + ESDHC_MIX_CTRL);
+		imx_data->is_ddr = 1;
+		/* update clock after enable DDR for strobe DLL lock */
+		host->ops->set_clock(host, host->clock);
+		esdhc_set_strobe_dll(host);
+		break;
+	case MMC_TIMING_LEGACY:
+	default:
+		esdhc_reset_tuning(host);
+		break;
+	}
+
+	esdhc_change_pinstate(host, timing);
+}
+
+static void esdhc_reset(struct sdhci_host *host, u8 mask)
+{
+	sdhci_reset(host, mask);
+
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
+static unsigned int esdhc_get_max_timeout_count(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+
+	/* Doc Erratum: the uSDHC actual maximum timeout count is 1 << 29 */
+	return esdhc_is_usdhc(imx_data) ? 1 << 29 : 1 << 27;
+}
+
+static void esdhc_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+
+	/* use maximum timeout counter */
+	esdhc_clrset_le(host, ESDHC_SYS_CTRL_DTOCV_MASK,
+			esdhc_is_usdhc(imx_data) ? 0xF : 0xE,
+			SDHCI_TIMEOUT_CONTROL);
+}
+
+static struct sdhci_ops sdhci_esdhc_ops = {
+	.read_l = esdhc_readl_le,
+	.read_w = esdhc_readw_le,
+	.read_b = esdhc_readb_le,
+	.write_l = esdhc_writel_le,
+	.write_w = esdhc_writew_le,
+	.write_b = esdhc_writeb_le,
+	.set_clock = esdhc_pltfm_set_clock,
+	.get_max_clock = esdhc_pltfm_get_max_clock,
+	.get_min_clock = esdhc_pltfm_get_min_clock,
+	.get_max_timeout_count = esdhc_get_max_timeout_count,
+	.get_ro = esdhc_pltfm_get_ro,
+	.set_timeout = esdhc_set_timeout,
+	.set_bus_width = esdhc_pltfm_set_bus_width,
+	.set_uhs_signaling = esdhc_set_uhs_signaling,
+	.reset = esdhc_reset,
+};
+
+static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT
+			| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
+			| SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC
+			| SDHCI_QUIRK_BROKEN_CARD_DETECTION,
+	.ops = &sdhci_esdhc_ops,
+};
+
+static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	int tmp;
+
+	if (esdhc_is_usdhc(imx_data)) {
+		/*
+		 * The imx6q ROM code will change the default watermark
+		 * level setting to something insane.  Change it back here.
+		 */
+		writel(ESDHC_WTMK_DEFAULT_VAL, host->ioaddr + ESDHC_WTMK_LVL);
+
+		/*
+		 * ROM code will change the bit burst_length_enable setting
+		 * to zero if this usdhc is chosen to boot system. Change
+		 * it back here, otherwise it will impact the performance a
+		 * lot. This bit is used to enable/disable the burst length
+		 * for the external AHB2AXI bridge. It's useful especially
+		 * for INCR transfer because without burst length indicator,
+		 * the AHB2AXI bridge does not know the burst length in
+		 * advance. And without burst length indicator, AHB INCR
+		 * transfer can only be converted to singles on the AXI side.
+		 */
+		writel(readl(host->ioaddr + SDHCI_HOST_CONTROL)
+			| ESDHC_BURST_LEN_EN_INCR,
+			host->ioaddr + SDHCI_HOST_CONTROL);
+
+		/*
+		 * erratum ESDHC_FLAG_ERR004536 fix for MX6Q TO1.2 and MX6DL
+		 * TO1.1, it's harmless for MX6SL
+		 */
+		writel(readl(host->ioaddr + 0x6c) & ~BIT(7),
+			host->ioaddr + 0x6c);
+
+		/* disable DLL_CTRL delay line settings */
+		writel(0x0, host->ioaddr + ESDHC_DLL_CTRL);
+
+		if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
+			tmp = readl(host->ioaddr + ESDHC_TUNING_CTRL);
+			tmp |= ESDHC_STD_TUNING_EN |
+				ESDHC_TUNING_START_TAP_DEFAULT;
+			if (imx_data->boarddata.tuning_start_tap) {
+				tmp &= ~ESDHC_TUNING_START_TAP_MASK;
+				tmp |= imx_data->boarddata.tuning_start_tap;
+			}
+
+			if (imx_data->boarddata.tuning_step) {
+				tmp &= ~ESDHC_TUNING_STEP_MASK;
+				tmp |= imx_data->boarddata.tuning_step
+					<< ESDHC_TUNING_STEP_SHIFT;
+			}
+			writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL);
+		}
+	}
+}
+
+#ifdef CONFIG_OF
+static int
+sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
+			 struct sdhci_host *host,
+			 struct pltfm_imx_data *imx_data)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
+	int ret;
+
+	if (of_get_property(np, "fsl,wp-controller", NULL))
+		boarddata->wp_type = ESDHC_WP_CONTROLLER;
+
+	boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
+	if (gpio_is_valid(boarddata->wp_gpio))
+		boarddata->wp_type = ESDHC_WP_GPIO;
+
+	of_property_read_u32(np, "fsl,tuning-step", &boarddata->tuning_step);
+	of_property_read_u32(np, "fsl,tuning-start-tap",
+			     &boarddata->tuning_start_tap);
+
+	if (of_find_property(np, "no-1-8-v", NULL))
+		host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+
+	if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line))
+		boarddata->delay_line = 0;
+
+	mmc_of_parse_voltage(np, &host->ocr_mask);
+
+	if (esdhc_is_usdhc(imx_data) && !IS_ERR(imx_data->pins_default)) {
+		imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
+						ESDHC_PINCTRL_STATE_100MHZ);
+		imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
+						ESDHC_PINCTRL_STATE_200MHZ);
+	}
+
+	/* call to generic mmc_of_parse to support additional capabilities */
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		return ret;
+
+	if (mmc_gpio_get_cd(host->mmc) >= 0)
+		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+	return 0;
+}
+#else
+static inline int
+sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
+			 struct sdhci_host *host,
+			 struct pltfm_imx_data *imx_data)
+{
+	return -ENODEV;
+}
+#endif
+
+static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev,
+			 struct sdhci_host *host,
+			 struct pltfm_imx_data *imx_data)
+{
+	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
+	int err;
+
+	if (!host->mmc->parent->platform_data) {
+		dev_err(mmc_dev(host->mmc), "no board data!\n");
+		return -EINVAL;
+	}
+
+	imx_data->boarddata = *((struct esdhc_platform_data *)
+				host->mmc->parent->platform_data);
+	/* write_protect */
+	if (boarddata->wp_type == ESDHC_WP_GPIO) {
+		err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
+		if (err) {
+			dev_err(mmc_dev(host->mmc),
+				"failed to request write-protect gpio!\n");
+			return err;
+		}
+		host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+	}
+
+	/* card_detect */
+	switch (boarddata->cd_type) {
+	case ESDHC_CD_GPIO:
+		err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
+		if (err) {
+			dev_err(mmc_dev(host->mmc),
+				"failed to request card-detect gpio!\n");
+			return err;
+		}
+		/* fall through */
+
+	case ESDHC_CD_CONTROLLER:
+		/* we have a working card_detect back */
+		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+		break;
+
+	case ESDHC_CD_PERMANENT:
+		host->mmc->caps |= MMC_CAP_NONREMOVABLE;
+		break;
+
+	case ESDHC_CD_NONE:
+		break;
+	}
+
+	switch (boarddata->max_bus_width) {
+	case 8:
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
+		break;
+	case 4:
+		host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+		break;
+	case 1:
+	default:
+		host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+		break;
+	}
+
+	return 0;
+}
+
+static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+			of_match_device(imx_esdhc_dt_ids, &pdev->dev);
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_host *host;
+	int err;
+	struct pltfm_imx_data *imx_data;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata,
+				sizeof(*imx_data));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+
+	imx_data = sdhci_pltfm_priv(pltfm_host);
+
+	imx_data->socdata = of_id ? of_id->data : (struct esdhc_soc_data *)
+						  pdev->id_entry->driver_data;
+
+	imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(imx_data->clk_ipg)) {
+		err = PTR_ERR(imx_data->clk_ipg);
+		goto free_sdhci;
+	}
+
+	imx_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(imx_data->clk_ahb)) {
+		err = PTR_ERR(imx_data->clk_ahb);
+		goto free_sdhci;
+	}
+
+	imx_data->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(imx_data->clk_per)) {
+		err = PTR_ERR(imx_data->clk_per);
+		goto free_sdhci;
+	}
+
+	pltfm_host->clk = imx_data->clk_per;
+	pltfm_host->clock = clk_get_rate(pltfm_host->clk);
+	err = clk_prepare_enable(imx_data->clk_per);
+	if (err)
+		goto free_sdhci;
+	err = clk_prepare_enable(imx_data->clk_ipg);
+	if (err)
+		goto disable_per_clk;
+	err = clk_prepare_enable(imx_data->clk_ahb);
+	if (err)
+		goto disable_ipg_clk;
+
+	imx_data->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(imx_data->pinctrl)) {
+		err = PTR_ERR(imx_data->pinctrl);
+		goto disable_ahb_clk;
+	}
+
+	imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl,
+						PINCTRL_STATE_DEFAULT);
+	if (IS_ERR(imx_data->pins_default))
+		dev_warn(mmc_dev(host->mmc), "could not get default state\n");
+
+	if (esdhc_is_usdhc(imx_data)) {
+		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+		host->mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;
+		if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200))
+			host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
+
+		/* clear tuning bits in case ROM has set it already */
+		writel(0x0, host->ioaddr + ESDHC_MIX_CTRL);
+		writel(0x0, host->ioaddr + SDHCI_AUTO_CMD_STATUS);
+		writel(0x0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS);
+	}
+
+	if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
+		sdhci_esdhc_ops.platform_execute_tuning =
+					esdhc_executing_tuning;
+
+	if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536)
+		host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
+
+	if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
+		host->quirks2 |= SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400;
+
+	if (of_id)
+		err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
+	else
+		err = sdhci_esdhc_imx_probe_nondt(pdev, host, imx_data);
+	if (err)
+		goto disable_ahb_clk;
+
+	sdhci_esdhc_imx_hwinit(host);
+
+	err = sdhci_add_host(host);
+	if (err)
+		goto disable_ahb_clk;
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_suspend_ignore_children(&pdev->dev, 1);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+disable_ahb_clk:
+	clk_disable_unprepare(imx_data->clk_ahb);
+disable_ipg_clk:
+	clk_disable_unprepare(imx_data->clk_ipg);
+disable_per_clk:
+	clk_disable_unprepare(imx_data->clk_per);
+free_sdhci:
+	sdhci_pltfm_free(pdev);
+	return err;
+}
+
+static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	int dead;
+
+	pm_runtime_get_sync(&pdev->dev);
+	dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	sdhci_remove_host(host, dead);
+
+	clk_disable_unprepare(imx_data->clk_per);
+	clk_disable_unprepare(imx_data->clk_ipg);
+	clk_disable_unprepare(imx_data->clk_ahb);
+
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_esdhc_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+		mmc_retune_needed(host->mmc);
+
+	return sdhci_suspend_host(host);
+}
+
+static int sdhci_esdhc_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	/* re-initialize hw state in case it's lost in low power mode */
+	sdhci_esdhc_imx_hwinit(host);
+
+	return sdhci_resume_host(host);
+}
+#endif
+
+#ifdef CONFIG_PM
+static int sdhci_esdhc_runtime_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	int ret;
+
+	ret = sdhci_runtime_suspend_host(host);
+	if (ret)
+		return ret;
+
+	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+		mmc_retune_needed(host->mmc);
+
+	if (!sdhci_sdio_irq_enabled(host)) {
+		imx_data->actual_clock = host->mmc->actual_clock;
+		esdhc_pltfm_set_clock(host, 0);
+		clk_disable_unprepare(imx_data->clk_per);
+		clk_disable_unprepare(imx_data->clk_ipg);
+	}
+	clk_disable_unprepare(imx_data->clk_ahb);
+
+	return ret;
+}
+
+static int sdhci_esdhc_runtime_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	int err;
+
+	err = clk_prepare_enable(imx_data->clk_ahb);
+	if (err)
+		return err;
+
+	if (!sdhci_sdio_irq_enabled(host)) {
+		err = clk_prepare_enable(imx_data->clk_per);
+		if (err)
+			goto disable_ahb_clk;
+		err = clk_prepare_enable(imx_data->clk_ipg);
+		if (err)
+			goto disable_per_clk;
+		esdhc_pltfm_set_clock(host, imx_data->actual_clock);
+	}
+
+	err = sdhci_runtime_resume_host(host);
+	if (err)
+		goto disable_ipg_clk;
+
+	return 0;
+
+disable_ipg_clk:
+	if (!sdhci_sdio_irq_enabled(host))
+		clk_disable_unprepare(imx_data->clk_ipg);
+disable_per_clk:
+	if (!sdhci_sdio_irq_enabled(host))
+		clk_disable_unprepare(imx_data->clk_per);
+disable_ahb_clk:
+	clk_disable_unprepare(imx_data->clk_ahb);
+	return err;
+}
+#endif
+
+static const struct dev_pm_ops sdhci_esdhc_pmops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sdhci_esdhc_suspend, sdhci_esdhc_resume)
+	SET_RUNTIME_PM_OPS(sdhci_esdhc_runtime_suspend,
+				sdhci_esdhc_runtime_resume, NULL)
+};
+
+static struct platform_driver sdhci_esdhc_imx_driver = {
+	.driver		= {
+		.name	= "sdhci-esdhc-imx",
+		.of_match_table = imx_esdhc_dt_ids,
+		.pm	= &sdhci_esdhc_pmops,
+	},
+	.id_table	= imx_esdhc_devtype,
+	.probe		= sdhci_esdhc_imx_probe,
+	.remove		= sdhci_esdhc_imx_remove,
+};
+
+module_platform_driver(sdhci_esdhc_imx_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC");
+MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>");
+MODULE_LICENSE("GPL v2");