Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 984 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
new file mode 100644
index 000000000..d6cb0f9a3
--- /dev/null
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -0,0 +1,984 @@
+/*
+ * Freescale eSDHC controller driver.
+ *
+ * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ *	    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/sys_soc.h>
+#include <linux/clk.h>
+#include <linux/ktime.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/host.h>
+#include "sdhci-pltfm.h"
+#include "sdhci-esdhc.h"
+
+#define VENDOR_V_22	0x12
+#define VENDOR_V_23	0x13
+
+#define MMC_TIMING_NUM (MMC_TIMING_MMC_HS400 + 1)
+
+struct esdhc_clk_fixup {
+	const unsigned int sd_dflt_max_clk;
+	const unsigned int max_clk[MMC_TIMING_NUM];
+};
+
+static const struct esdhc_clk_fixup ls1021a_esdhc_clk = {
+	.sd_dflt_max_clk = 25000000,
+	.max_clk[MMC_TIMING_MMC_HS] = 46500000,
+	.max_clk[MMC_TIMING_SD_HS] = 46500000,
+};
+
+static const struct esdhc_clk_fixup ls1046a_esdhc_clk = {
+	.sd_dflt_max_clk = 25000000,
+	.max_clk[MMC_TIMING_UHS_SDR104] = 167000000,
+	.max_clk[MMC_TIMING_MMC_HS200] = 167000000,
+};
+
+static const struct esdhc_clk_fixup ls1012a_esdhc_clk = {
+	.sd_dflt_max_clk = 25000000,
+	.max_clk[MMC_TIMING_UHS_SDR104] = 125000000,
+	.max_clk[MMC_TIMING_MMC_HS200] = 125000000,
+};
+
+static const struct esdhc_clk_fixup p1010_esdhc_clk = {
+	.sd_dflt_max_clk = 20000000,
+	.max_clk[MMC_TIMING_LEGACY] = 20000000,
+	.max_clk[MMC_TIMING_MMC_HS] = 42000000,
+	.max_clk[MMC_TIMING_SD_HS] = 40000000,
+};
+
+static const struct of_device_id sdhci_esdhc_of_match[] = {
+	{ .compatible = "fsl,ls1021a-esdhc", .data = &ls1021a_esdhc_clk},
+	{ .compatible = "fsl,ls1046a-esdhc", .data = &ls1046a_esdhc_clk},
+	{ .compatible = "fsl,ls1012a-esdhc", .data = &ls1012a_esdhc_clk},
+	{ .compatible = "fsl,p1010-esdhc",   .data = &p1010_esdhc_clk},
+	{ .compatible = "fsl,mpc8379-esdhc" },
+	{ .compatible = "fsl,mpc8536-esdhc" },
+	{ .compatible = "fsl,esdhc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
+
+struct sdhci_esdhc {
+	u8 vendor_ver;
+	u8 spec_ver;
+	bool quirk_incorrect_hostver;
+	unsigned int peripheral_clock;
+	const struct esdhc_clk_fixup *clk_fixup;
+};
+
+/**
+ * esdhc_read*_fixup - Fixup the value read from incompatible eSDHC register
+ *		       to make it compatible with SD spec.
+ *
+ * @host: pointer to sdhci_host
+ * @spec_reg: SD spec register address
+ * @value: 32bit eSDHC register value on spec_reg address
+ *
+ * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
+ * registers are 32 bits. There are differences in register size, register
+ * address, register function, bit position and function between eSDHC spec
+ * and SD spec.
+ *
+ * Return a fixed up register value
+ */
+static u32 esdhc_readl_fixup(struct sdhci_host *host,
+				     int spec_reg, u32 value)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+	u32 ret;
+
+	/*
+	 * The bit of ADMA flag in eSDHC is not compatible with standard
+	 * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
+	 * supported by eSDHC.
+	 * And for many FSL eSDHC controller, the reset value of field
+	 * SDHCI_CAN_DO_ADMA1 is 1, but some of them can't support ADMA,
+	 * only these vendor version is greater than 2.2/0x12 support ADMA.
+	 */
+	if ((spec_reg == SDHCI_CAPABILITIES) && (value & SDHCI_CAN_DO_ADMA1)) {
+		if (esdhc->vendor_ver > VENDOR_V_22) {
+			ret = value | SDHCI_CAN_DO_ADMA2;
+			return ret;
+		}
+	}
+	/*
+	 * The DAT[3:0] line signal levels and the CMD line signal level are
+	 * not compatible with standard SDHC register. The line signal levels
+	 * DAT[7:0] are at bits 31:24 and the command line signal level is at
+	 * bit 23. All other bits are the same as in the standard SDHC
+	 * register.
+	 */
+	if (spec_reg == SDHCI_PRESENT_STATE) {
+		ret = value & 0x000fffff;
+		ret |= (value >> 4) & SDHCI_DATA_LVL_MASK;
+		ret |= (value << 1) & SDHCI_CMD_LVL;
+		return ret;
+	}
+
+	/*
+	 * DTS properties of mmc host are used to enable each speed mode
+	 * according to soc and board capability. So clean up
+	 * SDR50/SDR104/DDR50 support bits here.
+	 */
+	if (spec_reg == SDHCI_CAPABILITIES_1) {
+		ret = value & ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
+				SDHCI_SUPPORT_DDR50);
+		return ret;
+	}
+
+	ret = value;
+	return ret;
+}
+
+static u16 esdhc_readw_fixup(struct sdhci_host *host,
+				     int spec_reg, u32 value)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+	u16 ret;
+	int shift = (spec_reg & 0x2) * 8;
+
+	if (spec_reg == SDHCI_HOST_VERSION)
+		ret = value & 0xffff;
+	else
+		ret = (value >> shift) & 0xffff;
+	/* Workaround for T4240-R1.0-R2.0 eSDHC which has incorrect
+	 * vendor version and spec version information.
+	 */
+	if ((spec_reg == SDHCI_HOST_VERSION) &&
+	    (esdhc->quirk_incorrect_hostver))
+		ret = (VENDOR_V_23 << SDHCI_VENDOR_VER_SHIFT) | SDHCI_SPEC_200;
+	return ret;
+}
+
+static u8 esdhc_readb_fixup(struct sdhci_host *host,
+				     int spec_reg, u32 value)
+{
+	u8 ret;
+	u8 dma_bits;
+	int shift = (spec_reg & 0x3) * 8;
+
+	ret = (value >> shift) & 0xff;
+
+	/*
+	 * "DMA select" locates at offset 0x28 in SD specification, but on
+	 * P5020 or P3041, it locates at 0x29.
+	 */
+	if (spec_reg == SDHCI_HOST_CONTROL) {
+		/* DMA select is 22,23 bits in Protocol Control Register */
+		dma_bits = (value >> 5) & SDHCI_CTRL_DMA_MASK;
+		/* fixup the result */
+		ret &= ~SDHCI_CTRL_DMA_MASK;
+		ret |= dma_bits;
+	}
+	return ret;
+}
+
+/**
+ * esdhc_write*_fixup - Fixup the SD spec register value so that it could be
+ *			written into eSDHC register.
+ *
+ * @host: pointer to sdhci_host
+ * @spec_reg: SD spec register address
+ * @value: 8/16/32bit SD spec register value that would be written
+ * @old_value: 32bit eSDHC register value on spec_reg address
+ *
+ * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
+ * registers are 32 bits. There are differences in register size, register
+ * address, register function, bit position and function between eSDHC spec
+ * and SD spec.
+ *
+ * Return a fixed up register value
+ */
+static u32 esdhc_writel_fixup(struct sdhci_host *host,
+				     int spec_reg, u32 value, u32 old_value)
+{
+	u32 ret;
+
+	/*
+	 * Enabling IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
+	 * when SYSCTL[RSTD] is set for some special operations.
+	 * No any impact on other operation.
+	 */
+	if (spec_reg == SDHCI_INT_ENABLE)
+		ret = value | SDHCI_INT_BLK_GAP;
+	else
+		ret = value;
+
+	return ret;
+}
+
+static u32 esdhc_writew_fixup(struct sdhci_host *host,
+				     int spec_reg, u16 value, u32 old_value)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	int shift = (spec_reg & 0x2) * 8;
+	u32 ret;
+
+	switch (spec_reg) {
+	case SDHCI_TRANSFER_MODE:
+		/*
+		 * Postpone this write, we must do it together with a
+		 * command write that is down below. Return old value.
+		 */
+		pltfm_host->xfer_mode_shadow = value;
+		return old_value;
+	case SDHCI_COMMAND:
+		ret = (value << 16) | pltfm_host->xfer_mode_shadow;
+		return ret;
+	}
+
+	ret = old_value & (~(0xffff << shift));
+	ret |= (value << shift);
+
+	if (spec_reg == SDHCI_BLOCK_SIZE) {
+		/*
+		 * Two last DMA bits are reserved, and first one is used for
+		 * non-standard blksz of 4096 bytes that we don't support
+		 * yet. So clear the DMA boundary bits.
+		 */
+		ret &= (~SDHCI_MAKE_BLKSZ(0x7, 0));
+	}
+	return ret;
+}
+
+static u32 esdhc_writeb_fixup(struct sdhci_host *host,
+				     int spec_reg, u8 value, u32 old_value)
+{
+	u32 ret;
+	u32 dma_bits;
+	u8 tmp;
+	int shift = (spec_reg & 0x3) * 8;
+
+	/*
+	 * eSDHC doesn't have a standard power control register, so we do
+	 * nothing here to avoid incorrect operation.
+	 */
+	if (spec_reg == SDHCI_POWER_CONTROL)
+		return old_value;
+	/*
+	 * "DMA select" location is offset 0x28 in SD specification, but on
+	 * P5020 or P3041, it's located at 0x29.
+	 */
+	if (spec_reg == SDHCI_HOST_CONTROL) {
+		/*
+		 * If host control register is not standard, exit
+		 * this function
+		 */
+		if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
+			return old_value;
+
+		/* DMA select is 22,23 bits in Protocol Control Register */
+		dma_bits = (value & SDHCI_CTRL_DMA_MASK) << 5;
+		ret = (old_value & (~(SDHCI_CTRL_DMA_MASK << 5))) | dma_bits;
+		tmp = (value & (~SDHCI_CTRL_DMA_MASK)) |
+		      (old_value & SDHCI_CTRL_DMA_MASK);
+		ret = (ret & (~0xff)) | tmp;
+
+		/* Prevent SDHCI core from writing reserved bits (e.g. HISPD) */
+		ret &= ~ESDHC_HOST_CONTROL_RES;
+		return ret;
+	}
+
+	ret = (old_value & (~(0xff << shift))) | (value << shift);
+	return ret;
+}
+
+static u32 esdhc_be_readl(struct sdhci_host *host, int reg)
+{
+	u32 ret;
+	u32 value;
+
+	if (reg == SDHCI_CAPABILITIES_1)
+		value = ioread32be(host->ioaddr + ESDHC_CAPABILITIES_1);
+	else
+		value = ioread32be(host->ioaddr + reg);
+
+	ret = esdhc_readl_fixup(host, reg, value);
+
+	return ret;
+}
+
+static u32 esdhc_le_readl(struct sdhci_host *host, int reg)
+{
+	u32 ret;
+	u32 value;
+
+	if (reg == SDHCI_CAPABILITIES_1)
+		value = ioread32(host->ioaddr + ESDHC_CAPABILITIES_1);
+	else
+		value = ioread32(host->ioaddr + reg);
+
+	ret = esdhc_readl_fixup(host, reg, value);
+
+	return ret;
+}
+
+static u16 esdhc_be_readw(struct sdhci_host *host, int reg)
+{
+	u16 ret;
+	u32 value;
+	int base = reg & ~0x3;
+
+	value = ioread32be(host->ioaddr + base);
+	ret = esdhc_readw_fixup(host, reg, value);
+	return ret;
+}
+
+static u16 esdhc_le_readw(struct sdhci_host *host, int reg)
+{
+	u16 ret;
+	u32 value;
+	int base = reg & ~0x3;
+
+	value = ioread32(host->ioaddr + base);
+	ret = esdhc_readw_fixup(host, reg, value);
+	return ret;
+}
+
+static u8 esdhc_be_readb(struct sdhci_host *host, int reg)
+{
+	u8 ret;
+	u32 value;
+	int base = reg & ~0x3;
+
+	value = ioread32be(host->ioaddr + base);
+	ret = esdhc_readb_fixup(host, reg, value);
+	return ret;
+}
+
+static u8 esdhc_le_readb(struct sdhci_host *host, int reg)
+{
+	u8 ret;
+	u32 value;
+	int base = reg & ~0x3;
+
+	value = ioread32(host->ioaddr + base);
+	ret = esdhc_readb_fixup(host, reg, value);
+	return ret;
+}
+
+static void esdhc_be_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	u32 value;
+
+	value = esdhc_writel_fixup(host, reg, val, 0);
+	iowrite32be(value, host->ioaddr + reg);
+}
+
+static void esdhc_le_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	u32 value;
+
+	value = esdhc_writel_fixup(host, reg, val, 0);
+	iowrite32(value, host->ioaddr + reg);
+}
+
+static void esdhc_be_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	int base = reg & ~0x3;
+	u32 value;
+	u32 ret;
+
+	value = ioread32be(host->ioaddr + base);
+	ret = esdhc_writew_fixup(host, reg, val, value);
+	if (reg != SDHCI_TRANSFER_MODE)
+		iowrite32be(ret, host->ioaddr + base);
+}
+
+static void esdhc_le_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	int base = reg & ~0x3;
+	u32 value;
+	u32 ret;
+
+	value = ioread32(host->ioaddr + base);
+	ret = esdhc_writew_fixup(host, reg, val, value);
+	if (reg != SDHCI_TRANSFER_MODE)
+		iowrite32(ret, host->ioaddr + base);
+}
+
+static void esdhc_be_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	int base = reg & ~0x3;
+	u32 value;
+	u32 ret;
+
+	value = ioread32be(host->ioaddr + base);
+	ret = esdhc_writeb_fixup(host, reg, val, value);
+	iowrite32be(ret, host->ioaddr + base);
+}
+
+static void esdhc_le_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	int base = reg & ~0x3;
+	u32 value;
+	u32 ret;
+
+	value = ioread32(host->ioaddr + base);
+	ret = esdhc_writeb_fixup(host, reg, val, value);
+	iowrite32(ret, host->ioaddr + base);
+}
+
+/*
+ * For Abort or Suspend after Stop at Block Gap, ignore the ADMA
+ * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
+ * and Block Gap Event(IRQSTAT[BGE]) are also set.
+ * For Continue, apply soft reset for data(SYSCTL[RSTD]);
+ * and re-issue the entire read transaction from beginning.
+ */
+static void esdhc_of_adma_workaround(struct sdhci_host *host, u32 intmask)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+	bool applicable;
+	dma_addr_t dmastart;
+	dma_addr_t dmanow;
+
+	applicable = (intmask & SDHCI_INT_DATA_END) &&
+		     (intmask & SDHCI_INT_BLK_GAP) &&
+		     (esdhc->vendor_ver == VENDOR_V_23);
+	if (!applicable)
+		return;
+
+	host->data->error = 0;
+	dmastart = sg_dma_address(host->data->sg);
+	dmanow = dmastart + host->data->bytes_xfered;
+	/*
+	 * Force update to the next DMA block boundary.
+	 */
+	dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
+		SDHCI_DEFAULT_BOUNDARY_SIZE;
+	host->data->bytes_xfered = dmanow - dmastart;
+	sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+}
+
+static int esdhc_of_enable_dma(struct sdhci_host *host)
+{
+	int ret;
+	u32 value;
+	struct device *dev = mmc_dev(host->mmc);
+
+	if (of_device_is_compatible(dev->of_node, "fsl,ls1043a-esdhc") ||
+	    of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc")) {
+		ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
+		if (ret)
+			return ret;
+	}
+
+	value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+
+	if (of_dma_is_coherent(dev->of_node))
+		value |= ESDHC_DMA_SNOOP;
+	else
+		value &= ~ESDHC_DMA_SNOOP;
+
+	sdhci_writel(host, value, ESDHC_DMA_SYSCTL);
+	return 0;
+}
+
+static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+
+	if (esdhc->peripheral_clock)
+		return esdhc->peripheral_clock;
+	else
+		return pltfm_host->clock;
+}
+
+static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+	unsigned int clock;
+
+	if (esdhc->peripheral_clock)
+		clock = esdhc->peripheral_clock;
+	else
+		clock = pltfm_host->clock;
+	return clock / 256 / 16;
+}
+
+static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
+{
+	u32 val;
+	ktime_t timeout;
+
+	val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+
+	if (enable)
+		val |= ESDHC_CLOCK_SDCLKEN;
+	else
+		val &= ~ESDHC_CLOCK_SDCLKEN;
+
+	sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
+
+	/* Wait max 20 ms */
+	timeout = ktime_add_ms(ktime_get(), 20);
+	val = ESDHC_CLOCK_STABLE;
+	while  (1) {
+		bool timedout = ktime_after(ktime_get(), timeout);
+
+		if (sdhci_readl(host, ESDHC_PRSSTAT) & val)
+			break;
+		if (timedout) {
+			pr_err("%s: Internal clock never stabilised.\n",
+				mmc_hostname(host->mmc));
+			break;
+		}
+		udelay(10);
+	}
+}
+
+static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+	int pre_div = 1;
+	int div = 1;
+	ktime_t timeout;
+	long fixup = 0;
+	u32 temp;
+
+	host->mmc->actual_clock = 0;
+
+	if (clock == 0) {
+		esdhc_clock_enable(host, false);
+		return;
+	}
+
+	/* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
+	if (esdhc->vendor_ver < VENDOR_V_23)
+		pre_div = 2;
+
+	if (host->mmc->card && mmc_card_sd(host->mmc->card) &&
+		esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY)
+		fixup = esdhc->clk_fixup->sd_dflt_max_clk;
+	else if (esdhc->clk_fixup)
+		fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing];
+
+	if (fixup && clock > fixup)
+		clock = fixup;
+
+	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+	temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
+		  ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);
+	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+
+	while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
+		pre_div *= 2;
+
+	while (host->max_clk / pre_div / div > clock && div < 16)
+		div++;
+
+	dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
+		clock, host->max_clk / pre_div / div);
+	host->mmc->actual_clock = host->max_clk / pre_div / div;
+	pre_div >>= 1;
+	div--;
+
+	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+	temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
+		| (div << ESDHC_DIVIDER_SHIFT)
+		| (pre_div << ESDHC_PREDIV_SHIFT));
+	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+
+	/* Wait max 20 ms */
+	timeout = ktime_add_ms(ktime_get(), 20);
+	while (1) {
+		bool timedout = ktime_after(ktime_get(), timeout);
+
+		if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)
+			break;
+		if (timedout) {
+			pr_err("%s: Internal clock never stabilised.\n",
+				mmc_hostname(host->mmc));
+			return;
+		}
+		udelay(10);
+	}
+
+	temp |= ESDHC_CLOCK_SDCLKEN;
+	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+}
+
+static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
+{
+	u32 ctrl;
+
+	ctrl = sdhci_readl(host, ESDHC_PROCTL);
+	ctrl &= (~ESDHC_CTRL_BUSWIDTH_MASK);
+	switch (width) {
+	case MMC_BUS_WIDTH_8:
+		ctrl |= ESDHC_CTRL_8BITBUS;
+		break;
+
+	case MMC_BUS_WIDTH_4:
+		ctrl |= ESDHC_CTRL_4BITBUS;
+		break;
+
+	default:
+		break;
+	}
+
+	sdhci_writel(host, ctrl, ESDHC_PROCTL);
+}
+
+static void esdhc_reset(struct sdhci_host *host, u8 mask)
+{
+	u32 val;
+
+	sdhci_reset(host, mask);
+
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+
+	if (mask & SDHCI_RESET_ALL) {
+		val = sdhci_readl(host, ESDHC_TBCTL);
+		val &= ~ESDHC_TB_EN;
+		sdhci_writel(host, val, ESDHC_TBCTL);
+	}
+}
+
+/* The SCFG, Supplemental Configuration Unit, provides SoC specific
+ * configuration and status registers for the device. There is a
+ * SDHC IO VSEL control register on SCFG for some platforms. It's
+ * used to support SDHC IO voltage switching.
+ */
+static const struct of_device_id scfg_device_ids[] = {
+	{ .compatible = "fsl,t1040-scfg", },
+	{ .compatible = "fsl,ls1012a-scfg", },
+	{ .compatible = "fsl,ls1046a-scfg", },
+	{}
+};
+
+/* SDHC IO VSEL control register definition */
+#define SCFG_SDHCIOVSELCR	0x408
+#define SDHCIOVSELCR_TGLEN	0x80000000
+#define SDHCIOVSELCR_VSELVAL	0x60000000
+#define SDHCIOVSELCR_SDHC_VS	0x00000001
+
+static int esdhc_signal_voltage_switch(struct mmc_host *mmc,
+				       struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct device_node *scfg_node;
+	void __iomem *scfg_base = NULL;
+	u32 sdhciovselcr;
+	u32 val;
+
+	/*
+	 * Signal Voltage Switching is only applicable for Host Controllers
+	 * v3.00 and above.
+	 */
+	if (host->version < SDHCI_SPEC_300)
+		return 0;
+
+	val = sdhci_readl(host, ESDHC_PROCTL);
+
+	switch (ios->signal_voltage) {
+	case MMC_SIGNAL_VOLTAGE_330:
+		val &= ~ESDHC_VOLT_SEL;
+		sdhci_writel(host, val, ESDHC_PROCTL);
+		return 0;
+	case MMC_SIGNAL_VOLTAGE_180:
+		scfg_node = of_find_matching_node(NULL, scfg_device_ids);
+		if (scfg_node)
+			scfg_base = of_iomap(scfg_node, 0);
+		if (scfg_base) {
+			sdhciovselcr = SDHCIOVSELCR_TGLEN |
+				       SDHCIOVSELCR_VSELVAL;
+			iowrite32be(sdhciovselcr,
+				scfg_base + SCFG_SDHCIOVSELCR);
+
+			val |= ESDHC_VOLT_SEL;
+			sdhci_writel(host, val, ESDHC_PROCTL);
+			mdelay(5);
+
+			sdhciovselcr = SDHCIOVSELCR_TGLEN |
+				       SDHCIOVSELCR_SDHC_VS;
+			iowrite32be(sdhciovselcr,
+				scfg_base + SCFG_SDHCIOVSELCR);
+			iounmap(scfg_base);
+		} else {
+			val |= ESDHC_VOLT_SEL;
+			sdhci_writel(host, val, ESDHC_PROCTL);
+		}
+		return 0;
+	default:
+		return 0;
+	}
+}
+
+static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	u32 val;
+
+	/* Use tuning block for tuning procedure */
+	esdhc_clock_enable(host, false);
+	val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+	val |= ESDHC_FLUSH_ASYNC_FIFO;
+	sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
+
+	val = sdhci_readl(host, ESDHC_TBCTL);
+	val |= ESDHC_TB_EN;
+	sdhci_writel(host, val, ESDHC_TBCTL);
+	esdhc_clock_enable(host, true);
+
+	return sdhci_execute_tuning(mmc, opcode);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static u32 esdhc_proctl;
+static int esdhc_of_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	esdhc_proctl = sdhci_readl(host, SDHCI_HOST_CONTROL);
+
+	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+		mmc_retune_needed(host->mmc);
+
+	return sdhci_suspend_host(host);
+}
+
+static int esdhc_of_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	int ret = sdhci_resume_host(host);
+
+	if (ret == 0) {
+		/* Isn't this already done by sdhci_resume_host() ? --rmk */
+		esdhc_of_enable_dma(host);
+		sdhci_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
+	}
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(esdhc_of_dev_pm_ops,
+			esdhc_of_suspend,
+			esdhc_of_resume);
+
+static const struct sdhci_ops sdhci_esdhc_be_ops = {
+	.read_l = esdhc_be_readl,
+	.read_w = esdhc_be_readw,
+	.read_b = esdhc_be_readb,
+	.write_l = esdhc_be_writel,
+	.write_w = esdhc_be_writew,
+	.write_b = esdhc_be_writeb,
+	.set_clock = esdhc_of_set_clock,
+	.enable_dma = esdhc_of_enable_dma,
+	.get_max_clock = esdhc_of_get_max_clock,
+	.get_min_clock = esdhc_of_get_min_clock,
+	.adma_workaround = esdhc_of_adma_workaround,
+	.set_bus_width = esdhc_pltfm_set_bus_width,
+	.reset = esdhc_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_ops sdhci_esdhc_le_ops = {
+	.read_l = esdhc_le_readl,
+	.read_w = esdhc_le_readw,
+	.read_b = esdhc_le_readb,
+	.write_l = esdhc_le_writel,
+	.write_w = esdhc_le_writew,
+	.write_b = esdhc_le_writeb,
+	.set_clock = esdhc_of_set_clock,
+	.enable_dma = esdhc_of_enable_dma,
+	.get_max_clock = esdhc_of_get_max_clock,
+	.get_min_clock = esdhc_of_get_min_clock,
+	.adma_workaround = esdhc_of_adma_workaround,
+	.set_bus_width = esdhc_pltfm_set_bus_width,
+	.reset = esdhc_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
+	.quirks = ESDHC_DEFAULT_QUIRKS |
+#ifdef CONFIG_PPC
+		  SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+#endif
+		  SDHCI_QUIRK_NO_CARD_NO_RESET |
+		  SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.ops = &sdhci_esdhc_be_ops,
+};
+
+static const struct sdhci_pltfm_data sdhci_esdhc_le_pdata = {
+	.quirks = ESDHC_DEFAULT_QUIRKS |
+		  SDHCI_QUIRK_NO_CARD_NO_RESET |
+		  SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.ops = &sdhci_esdhc_le_ops,
+};
+
+static struct soc_device_attribute soc_incorrect_hostver[] = {
+	{ .family = "QorIQ T4240", .revision = "1.0", },
+	{ .family = "QorIQ T4240", .revision = "2.0", },
+	{ },
+};
+
+static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
+{
+	const struct of_device_id *match;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_esdhc *esdhc;
+	struct device_node *np;
+	struct clk *clk;
+	u32 val;
+	u16 host_ver;
+
+	pltfm_host = sdhci_priv(host);
+	esdhc = sdhci_pltfm_priv(pltfm_host);
+
+	host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
+	esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
+			     SDHCI_VENDOR_VER_SHIFT;
+	esdhc->spec_ver = host_ver & SDHCI_SPEC_VER_MASK;
+	if (soc_device_match(soc_incorrect_hostver))
+		esdhc->quirk_incorrect_hostver = true;
+	else
+		esdhc->quirk_incorrect_hostver = false;
+
+	match = of_match_node(sdhci_esdhc_of_match, pdev->dev.of_node);
+	if (match)
+		esdhc->clk_fixup = match->data;
+	np = pdev->dev.of_node;
+	clk = of_clk_get(np, 0);
+	if (!IS_ERR(clk)) {
+		/*
+		 * esdhc->peripheral_clock would be assigned with a value
+		 * which is eSDHC base clock when use periperal clock.
+		 * For ls1046a, the clock value got by common clk API is
+		 * peripheral clock while the eSDHC base clock is 1/2
+		 * peripheral clock.
+		 */
+		if (of_device_is_compatible(np, "fsl,ls1046a-esdhc"))
+			esdhc->peripheral_clock = clk_get_rate(clk) / 2;
+		else
+			esdhc->peripheral_clock = clk_get_rate(clk);
+
+		clk_put(clk);
+	}
+
+	if (esdhc->peripheral_clock) {
+		esdhc_clock_enable(host, false);
+		val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+		val |= ESDHC_PERIPHERAL_CLK_SEL;
+		sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
+		esdhc_clock_enable(host, true);
+	}
+}
+
+static int sdhci_esdhc_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct device_node *np;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_esdhc *esdhc;
+	int ret;
+
+	np = pdev->dev.of_node;
+
+	if (of_property_read_bool(np, "little-endian"))
+		host = sdhci_pltfm_init(pdev, &sdhci_esdhc_le_pdata,
+					sizeof(struct sdhci_esdhc));
+	else
+		host = sdhci_pltfm_init(pdev, &sdhci_esdhc_be_pdata,
+					sizeof(struct sdhci_esdhc));
+
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	host->mmc_host_ops.start_signal_voltage_switch =
+		esdhc_signal_voltage_switch;
+	host->mmc_host_ops.execute_tuning = esdhc_execute_tuning;
+	host->tuning_delay = 1;
+
+	esdhc_init(pdev, host);
+
+	sdhci_get_of_property(pdev);
+
+	pltfm_host = sdhci_priv(host);
+	esdhc = sdhci_pltfm_priv(pltfm_host);
+	if (esdhc->vendor_ver == VENDOR_V_22)
+		host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+
+	if (esdhc->vendor_ver > VENDOR_V_22)
+		host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
+
+	if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc")) {
+		host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
+		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+	}
+
+	if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
+	    of_device_is_compatible(np, "fsl,p5020-esdhc") ||
+	    of_device_is_compatible(np, "fsl,p4080-esdhc") ||
+	    of_device_is_compatible(np, "fsl,p1020-esdhc") ||
+	    of_device_is_compatible(np, "fsl,t1040-esdhc"))
+		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+	if (of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
+		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+	if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
+		/*
+		 * Freescale messed up with P2020 as it has a non-standard
+		 * host control register
+		 */
+		host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
+	}
+
+	/* call to generic mmc_of_parse to support additional capabilities */
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto err;
+
+	mmc_of_parse_voltage(np, &host->ocr_mask);
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err;
+
+	return 0;
+ err:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static struct platform_driver sdhci_esdhc_driver = {
+	.driver = {
+		.name = "sdhci-esdhc",
+		.of_match_table = sdhci_esdhc_of_match,
+		.pm = &esdhc_of_dev_pm_ops,
+	},
+	.probe = sdhci_esdhc_probe,
+	.remove = sdhci_pltfm_unregister,
+};
+
+module_platform_driver(sdhci_esdhc_driver);
+
+MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC");
+MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, "
+	      "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL v2");