Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 253 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c
new file mode 100644
index 000000000..391d52b46
--- /dev/null
+++ b/drivers/mmc/host/sdhci-sirf.c
@@ -0,0 +1,253 @@
+/*
+ * SDHCI support for SiRF primaII and marco SoCs
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/mmc/slot-gpio.h>
+#include "sdhci-pltfm.h"
+
+#define SDHCI_CLK_DELAY_SETTING 0x4C
+#define SDHCI_SIRF_8BITBUS BIT(3)
+#define SIRF_TUNING_COUNT 16384
+
+struct sdhci_sirf_priv {
+	int gpio_cd;
+};
+
+static void sdhci_sirf_set_bus_width(struct sdhci_host *host, int width)
+{
+	u8 ctrl;
+
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+	ctrl &= ~(SDHCI_CTRL_4BITBUS | SDHCI_SIRF_8BITBUS);
+
+	/*
+	 * CSR atlas7 and prima2 SD host version is not 3.0
+	 * 8bit-width enable bit of CSR SD hosts is 3,
+	 * while stardard hosts use bit 5
+	 */
+	if (width == MMC_BUS_WIDTH_8)
+		ctrl |= SDHCI_SIRF_8BITBUS;
+	else if (width == MMC_BUS_WIDTH_4)
+		ctrl |= SDHCI_CTRL_4BITBUS;
+
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+static u32 sdhci_sirf_readl_le(struct sdhci_host *host, int reg)
+{
+	u32 val = readl(host->ioaddr + reg);
+
+	if (unlikely((reg == SDHCI_CAPABILITIES_1) &&
+			(host->mmc->caps & MMC_CAP_UHS_SDR50))) {
+		/* fake CAP_1 register */
+		val = SDHCI_SUPPORT_DDR50 |
+			SDHCI_SUPPORT_SDR50 | SDHCI_USE_SDR50_TUNING;
+	}
+
+	if (unlikely(reg == SDHCI_SLOT_INT_STATUS)) {
+		u32 prss = val;
+		/* fake chips as V3.0 host conreoller */
+		prss &= ~(0xFF << 16);
+		val = prss | (SDHCI_SPEC_300 << 16);
+	}
+	return val;
+}
+
+static u16 sdhci_sirf_readw_le(struct sdhci_host *host, int reg)
+{
+	u16 ret = 0;
+
+	ret = readw(host->ioaddr + reg);
+
+	if (unlikely(reg == SDHCI_HOST_VERSION)) {
+		ret = readw(host->ioaddr + SDHCI_HOST_VERSION);
+		ret |= SDHCI_SPEC_300;
+	}
+
+	return ret;
+}
+
+static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+	int tuning_seq_cnt = 3;
+	int phase;
+	u8 tuned_phase_cnt = 0;
+	int rc = 0, longest_range = 0;
+	int start = -1, end = 0, tuning_value = -1, range = 0;
+	u16 clock_setting;
+	struct mmc_host *mmc = host->mmc;
+
+	clock_setting = sdhci_readw(host, SDHCI_CLK_DELAY_SETTING);
+	clock_setting &= ~0x3fff;
+
+retry:
+	phase = 0;
+	tuned_phase_cnt = 0;
+	do {
+		sdhci_writel(host,
+			clock_setting | phase,
+			SDHCI_CLK_DELAY_SETTING);
+
+		if (!mmc_send_tuning(mmc, opcode, NULL)) {
+			/* Tuning is successful at this tuning point */
+			tuned_phase_cnt++;
+			dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
+				 mmc_hostname(mmc), phase);
+			if (start == -1)
+				start = phase;
+			end = phase;
+			range++;
+			if (phase == (SIRF_TUNING_COUNT - 1)
+				&& range > longest_range)
+				tuning_value = (start + end) / 2;
+		} else {
+			dev_dbg(mmc_dev(mmc), "%s: Found bad phase = %d\n",
+				 mmc_hostname(mmc), phase);
+			if (range > longest_range) {
+				tuning_value = (start + end) / 2;
+				longest_range = range;
+			}
+			start = -1;
+			end = range = 0;
+		}
+	} while (++phase < SIRF_TUNING_COUNT);
+
+	if (tuned_phase_cnt && tuning_value > 0) {
+		/*
+		 * Finally set the selected phase in delay
+		 * line hw block.
+		 */
+		phase = tuning_value;
+		sdhci_writel(host,
+			clock_setting | phase,
+			SDHCI_CLK_DELAY_SETTING);
+
+		dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
+			 mmc_hostname(mmc), phase);
+	} else {
+		if (--tuning_seq_cnt)
+			goto retry;
+		/* Tuning failed */
+		dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n",
+		       mmc_hostname(mmc));
+		rc = -EIO;
+	}
+
+	return rc;
+}
+
+static const struct sdhci_ops sdhci_sirf_ops = {
+	.read_l = sdhci_sirf_readl_le,
+	.read_w = sdhci_sirf_readw_le,
+	.platform_execute_tuning = sdhci_sirf_execute_tuning,
+	.set_clock = sdhci_set_clock,
+	.get_max_clock	= sdhci_pltfm_clk_get_max_clock,
+	.set_bus_width = sdhci_sirf_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data sdhci_sirf_pdata = {
+	.ops = &sdhci_sirf_ops,
+	.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+		SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+		SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+		SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+};
+
+static int sdhci_sirf_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_sirf_priv *priv;
+	struct clk *clk;
+	int gpio_cd;
+	int ret;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "unable to get clock");
+		return PTR_ERR(clk);
+	}
+
+	if (pdev->dev.of_node)
+		gpio_cd = of_get_named_gpio(pdev->dev.of_node, "cd-gpios", 0);
+	else
+		gpio_cd = -EINVAL;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata, sizeof(struct sdhci_sirf_priv));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->clk = clk;
+	priv = sdhci_pltfm_priv(pltfm_host);
+	priv->gpio_cd = gpio_cd;
+
+	sdhci_get_of_property(pdev);
+
+	ret = clk_prepare_enable(pltfm_host->clk);
+	if (ret)
+		goto err_clk_prepare;
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_sdhci_add;
+
+	/*
+	 * We must request the IRQ after sdhci_add_host(), as the tasklet only
+	 * gets setup in sdhci_add_host() and we oops.
+	 */
+	if (gpio_is_valid(priv->gpio_cd)) {
+		ret = mmc_gpio_request_cd(host->mmc, priv->gpio_cd, 0);
+		if (ret) {
+			dev_err(&pdev->dev, "card detect irq request failed: %d\n",
+				ret);
+			goto err_request_cd;
+		}
+		mmc_gpiod_request_cd_irq(host->mmc);
+	}
+
+	return 0;
+
+err_request_cd:
+	sdhci_remove_host(host, 0);
+err_sdhci_add:
+	clk_disable_unprepare(pltfm_host->clk);
+err_clk_prepare:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static const struct of_device_id sdhci_sirf_of_match[] = {
+	{ .compatible = "sirf,prima2-sdhc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_sirf_of_match);
+
+static struct platform_driver sdhci_sirf_driver = {
+	.driver		= {
+		.name	= "sdhci-sirf",
+		.of_match_table = sdhci_sirf_of_match,
+		.pm	= &sdhci_pltfm_pmops,
+	},
+	.probe		= sdhci_sirf_probe,
+	.remove		= sdhci_pltfm_unregister,
+};
+
+module_platform_driver(sdhci_sirf_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for SiRFprimaII/SiRFmarco");
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_LICENSE("GPL v2");