Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 847 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
new file mode 100644
index 000000000..caccedc83
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -0,0 +1,847 @@
+/*
+ * PHY support for Xenon SDHC
+ *
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author:	Hu Ziji <huziji@marvell.com>
+ * Date:	2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/ktime.h>
+#include <linux/of_address.h>
+
+#include "sdhci-pltfm.h"
+#include "sdhci-xenon.h"
+
+/* Register base for eMMC PHY 5.0 Version */
+#define XENON_EMMC_5_0_PHY_REG_BASE		0x0160
+/* Register base for eMMC PHY 5.1 Version */
+#define XENON_EMMC_PHY_REG_BASE			0x0170
+
+#define XENON_EMMC_PHY_TIMING_ADJUST		XENON_EMMC_PHY_REG_BASE
+#define XENON_EMMC_5_0_PHY_TIMING_ADJUST	XENON_EMMC_5_0_PHY_REG_BASE
+#define XENON_TIMING_ADJUST_SLOW_MODE		BIT(29)
+#define XENON_TIMING_ADJUST_SDIO_MODE		BIT(28)
+#define XENON_SAMPL_INV_QSP_PHASE_SELECT	BIT(18)
+#define XENON_SAMPL_INV_QSP_PHASE_SELECT_SHIFT	18
+#define XENON_PHY_INITIALIZAION			BIT(31)
+#define XENON_WAIT_CYCLE_BEFORE_USING_MASK	0xF
+#define XENON_WAIT_CYCLE_BEFORE_USING_SHIFT	12
+#define XENON_FC_SYNC_EN_DURATION_MASK		0xF
+#define XENON_FC_SYNC_EN_DURATION_SHIFT		8
+#define XENON_FC_SYNC_RST_EN_DURATION_MASK	0xF
+#define XENON_FC_SYNC_RST_EN_DURATION_SHIFT	4
+#define XENON_FC_SYNC_RST_DURATION_MASK		0xF
+#define XENON_FC_SYNC_RST_DURATION_SHIFT	0
+
+#define XENON_EMMC_PHY_FUNC_CONTROL		(XENON_EMMC_PHY_REG_BASE + 0x4)
+#define XENON_EMMC_5_0_PHY_FUNC_CONTROL		\
+	(XENON_EMMC_5_0_PHY_REG_BASE + 0x4)
+#define XENON_ASYNC_DDRMODE_MASK		BIT(23)
+#define XENON_ASYNC_DDRMODE_SHIFT		23
+#define XENON_CMD_DDR_MODE			BIT(16)
+#define XENON_DQ_DDR_MODE_SHIFT			8
+#define XENON_DQ_DDR_MODE_MASK			0xFF
+#define XENON_DQ_ASYNC_MODE			BIT(4)
+
+#define XENON_EMMC_PHY_PAD_CONTROL		(XENON_EMMC_PHY_REG_BASE + 0x8)
+#define XENON_EMMC_5_0_PHY_PAD_CONTROL		\
+	(XENON_EMMC_5_0_PHY_REG_BASE + 0x8)
+#define XENON_REC_EN_SHIFT			24
+#define XENON_REC_EN_MASK			0xF
+#define XENON_FC_DQ_RECEN			BIT(24)
+#define XENON_FC_CMD_RECEN			BIT(25)
+#define XENON_FC_QSP_RECEN			BIT(26)
+#define XENON_FC_QSN_RECEN			BIT(27)
+#define XENON_OEN_QSN				BIT(28)
+#define XENON_AUTO_RECEN_CTRL			BIT(30)
+#define XENON_FC_ALL_CMOS_RECEIVER		0xF000
+
+#define XENON_EMMC5_FC_QSP_PD			BIT(18)
+#define XENON_EMMC5_FC_QSP_PU			BIT(22)
+#define XENON_EMMC5_FC_CMD_PD			BIT(17)
+#define XENON_EMMC5_FC_CMD_PU			BIT(21)
+#define XENON_EMMC5_FC_DQ_PD			BIT(16)
+#define XENON_EMMC5_FC_DQ_PU			BIT(20)
+
+#define XENON_EMMC_PHY_PAD_CONTROL1		(XENON_EMMC_PHY_REG_BASE + 0xC)
+#define XENON_EMMC5_1_FC_QSP_PD			BIT(9)
+#define XENON_EMMC5_1_FC_QSP_PU			BIT(25)
+#define XENON_EMMC5_1_FC_CMD_PD			BIT(8)
+#define XENON_EMMC5_1_FC_CMD_PU			BIT(24)
+#define XENON_EMMC5_1_FC_DQ_PD			0xFF
+#define XENON_EMMC5_1_FC_DQ_PU			(0xFF << 16)
+
+#define XENON_EMMC_PHY_PAD_CONTROL2		(XENON_EMMC_PHY_REG_BASE + 0x10)
+#define XENON_EMMC_5_0_PHY_PAD_CONTROL2		\
+	(XENON_EMMC_5_0_PHY_REG_BASE + 0xC)
+#define XENON_ZNR_MASK				0x1F
+#define XENON_ZNR_SHIFT				8
+#define XENON_ZPR_MASK				0x1F
+/* Preferred ZNR and ZPR value vary between different boards.
+ * The specific ZNR and ZPR value should be defined here
+ * according to board actual timing.
+ */
+#define XENON_ZNR_DEF_VALUE			0xF
+#define XENON_ZPR_DEF_VALUE			0xF
+
+#define XENON_EMMC_PHY_DLL_CONTROL		(XENON_EMMC_PHY_REG_BASE + 0x14)
+#define XENON_EMMC_5_0_PHY_DLL_CONTROL		\
+	(XENON_EMMC_5_0_PHY_REG_BASE + 0x10)
+#define XENON_DLL_ENABLE			BIT(31)
+#define XENON_DLL_UPDATE_STROBE_5_0		BIT(30)
+#define XENON_DLL_REFCLK_SEL			BIT(30)
+#define XENON_DLL_UPDATE			BIT(23)
+#define XENON_DLL_PHSEL1_SHIFT			24
+#define XENON_DLL_PHSEL0_SHIFT			16
+#define XENON_DLL_PHASE_MASK			0x3F
+#define XENON_DLL_PHASE_90_DEGREE		0x1F
+#define XENON_DLL_FAST_LOCK			BIT(5)
+#define XENON_DLL_GAIN2X			BIT(3)
+#define XENON_DLL_BYPASS_EN			BIT(0)
+
+#define XENON_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST	\
+	(XENON_EMMC_5_0_PHY_REG_BASE + 0x14)
+#define XENON_EMMC_5_0_PHY_LOGIC_TIMING_VALUE	0x5A54
+#define XENON_EMMC_PHY_LOGIC_TIMING_ADJUST	(XENON_EMMC_PHY_REG_BASE + 0x18)
+#define XENON_LOGIC_TIMING_VALUE		0x00AA8977
+
+/*
+ * List offset of PHY registers and some special register values
+ * in eMMC PHY 5.0 or eMMC PHY 5.1
+ */
+struct xenon_emmc_phy_regs {
+	/* Offset of Timing Adjust register */
+	u16 timing_adj;
+	/* Offset of Func Control register */
+	u16 func_ctrl;
+	/* Offset of Pad Control register */
+	u16 pad_ctrl;
+	/* Offset of Pad Control register 2 */
+	u16 pad_ctrl2;
+	/* Offset of DLL Control register */
+	u16 dll_ctrl;
+	/* Offset of Logic Timing Adjust register */
+	u16 logic_timing_adj;
+	/* DLL Update Enable bit */
+	u32 dll_update;
+	/* value in Logic Timing Adjustment register */
+	u32 logic_timing_val;
+};
+
+static const char * const phy_types[] = {
+	"emmc 5.0 phy",
+	"emmc 5.1 phy"
+};
+
+enum xenon_phy_type_enum {
+	EMMC_5_0_PHY,
+	EMMC_5_1_PHY,
+	NR_PHY_TYPES
+};
+
+enum soc_pad_ctrl_type {
+	SOC_PAD_SD,
+	SOC_PAD_FIXED_1_8V,
+};
+
+struct soc_pad_ctrl {
+	/* Register address of SoC PHY PAD ctrl */
+	void __iomem	*reg;
+	/* SoC PHY PAD ctrl type */
+	enum soc_pad_ctrl_type pad_type;
+	/* SoC specific operation to set SoC PHY PAD */
+	void (*set_soc_pad)(struct sdhci_host *host,
+			    unsigned char signal_voltage);
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_0_phy_regs = {
+	.timing_adj	= XENON_EMMC_5_0_PHY_TIMING_ADJUST,
+	.func_ctrl	= XENON_EMMC_5_0_PHY_FUNC_CONTROL,
+	.pad_ctrl	= XENON_EMMC_5_0_PHY_PAD_CONTROL,
+	.pad_ctrl2	= XENON_EMMC_5_0_PHY_PAD_CONTROL2,
+	.dll_ctrl	= XENON_EMMC_5_0_PHY_DLL_CONTROL,
+	.logic_timing_adj = XENON_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST,
+	.dll_update	= XENON_DLL_UPDATE_STROBE_5_0,
+	.logic_timing_val = XENON_EMMC_5_0_PHY_LOGIC_TIMING_VALUE,
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_1_phy_regs = {
+	.timing_adj	= XENON_EMMC_PHY_TIMING_ADJUST,
+	.func_ctrl	= XENON_EMMC_PHY_FUNC_CONTROL,
+	.pad_ctrl	= XENON_EMMC_PHY_PAD_CONTROL,
+	.pad_ctrl2	= XENON_EMMC_PHY_PAD_CONTROL2,
+	.dll_ctrl	= XENON_EMMC_PHY_DLL_CONTROL,
+	.logic_timing_adj = XENON_EMMC_PHY_LOGIC_TIMING_ADJUST,
+	.dll_update	= XENON_DLL_UPDATE,
+	.logic_timing_val = XENON_LOGIC_TIMING_VALUE,
+};
+
+/*
+ * eMMC PHY configuration and operations
+ */
+struct xenon_emmc_phy_params {
+	bool	slow_mode;
+
+	u8	znr;
+	u8	zpr;
+
+	/* Nr of consecutive Sampling Points of a Valid Sampling Window */
+	u8	nr_tun_times;
+	/* Divider for calculating Tuning Step */
+	u8	tun_step_divider;
+
+	struct soc_pad_ctrl pad_ctrl;
+};
+
+static int xenon_alloc_emmc_phy(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_params *params;
+
+	params = devm_kzalloc(mmc_dev(host->mmc), sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	priv->phy_params = params;
+	if (priv->phy_type == EMMC_5_0_PHY)
+		priv->emmc_phy_regs = &xenon_emmc_5_0_phy_regs;
+	else
+		priv->emmc_phy_regs = &xenon_emmc_5_1_phy_regs;
+
+	return 0;
+}
+
+/*
+ * eMMC 5.0/5.1 PHY init/re-init.
+ * eMMC PHY init should be executed after:
+ * 1. SDCLK frequency changes.
+ * 2. SDCLK is stopped and re-enabled.
+ * 3. config in emmc_phy_regs->timing_adj and emmc_phy_regs->func_ctrl
+ * are changed
+ */
+static int xenon_emmc_phy_init(struct sdhci_host *host)
+{
+	u32 reg;
+	u32 wait, clock;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	reg |= XENON_PHY_INITIALIZAION;
+	sdhci_writel(host, reg, phy_regs->timing_adj);
+
+	/* Add duration of FC_SYNC_RST */
+	wait = ((reg >> XENON_FC_SYNC_RST_DURATION_SHIFT) &
+			XENON_FC_SYNC_RST_DURATION_MASK);
+	/* Add interval between FC_SYNC_EN and FC_SYNC_RST */
+	wait += ((reg >> XENON_FC_SYNC_RST_EN_DURATION_SHIFT) &
+			XENON_FC_SYNC_RST_EN_DURATION_MASK);
+	/* Add duration of asserting FC_SYNC_EN */
+	wait += ((reg >> XENON_FC_SYNC_EN_DURATION_SHIFT) &
+			XENON_FC_SYNC_EN_DURATION_MASK);
+	/* Add duration of waiting for PHY */
+	wait += ((reg >> XENON_WAIT_CYCLE_BEFORE_USING_SHIFT) &
+			XENON_WAIT_CYCLE_BEFORE_USING_MASK);
+	/* 4 additional bus clock and 4 AXI bus clock are required */
+	wait += 8;
+	wait <<= 20;
+
+	clock = host->clock;
+	if (!clock)
+		/* Use the possibly slowest bus frequency value */
+		clock = XENON_LOWEST_SDCLK_FREQ;
+	/* get the wait time */
+	wait /= clock;
+	wait++;
+	/* wait for host eMMC PHY init completes */
+	udelay(wait);
+
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	reg &= XENON_PHY_INITIALIZAION;
+	if (reg) {
+		dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n",
+			wait);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+#define ARMADA_3700_SOC_PAD_1_8V	0x1
+#define ARMADA_3700_SOC_PAD_3_3V	0x0
+
+static void armada_3700_soc_pad_voltage_set(struct sdhci_host *host,
+					    unsigned char signal_voltage)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_params *params = priv->phy_params;
+
+	if (params->pad_ctrl.pad_type == SOC_PAD_FIXED_1_8V) {
+		writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+	} else if (params->pad_ctrl.pad_type == SOC_PAD_SD) {
+		if (signal_voltage == MMC_SIGNAL_VOLTAGE_180)
+			writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+		else if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+			writel(ARMADA_3700_SOC_PAD_3_3V, params->pad_ctrl.reg);
+	}
+}
+
+/*
+ * Set SoC PHY voltage PAD control register,
+ * according to the operation voltage on PAD.
+ * The detailed operation depends on SoC implementation.
+ */
+static void xenon_emmc_phy_set_soc_pad(struct sdhci_host *host,
+				       unsigned char signal_voltage)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_params *params = priv->phy_params;
+
+	if (!params->pad_ctrl.reg)
+		return;
+
+	if (params->pad_ctrl.set_soc_pad)
+		params->pad_ctrl.set_soc_pad(host, signal_voltage);
+}
+
+/*
+ * Enable eMMC PHY HW DLL
+ * DLL should be enabled and stable before HS200/SDR104 tuning,
+ * and before HS400 data strobe setting.
+ */
+static int xenon_emmc_phy_enable_dll(struct sdhci_host *host)
+{
+	u32 reg;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	ktime_t timeout;
+
+	if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+		return -EINVAL;
+
+	reg = sdhci_readl(host, phy_regs->dll_ctrl);
+	if (reg & XENON_DLL_ENABLE)
+		return 0;
+
+	/* Enable DLL */
+	reg = sdhci_readl(host, phy_regs->dll_ctrl);
+	reg |= (XENON_DLL_ENABLE | XENON_DLL_FAST_LOCK);
+
+	/*
+	 * Set Phase as 90 degree, which is most common value.
+	 * Might set another value if necessary.
+	 * The granularity is 1 degree.
+	 */
+	reg &= ~((XENON_DLL_PHASE_MASK << XENON_DLL_PHSEL0_SHIFT) |
+		 (XENON_DLL_PHASE_MASK << XENON_DLL_PHSEL1_SHIFT));
+	reg |= ((XENON_DLL_PHASE_90_DEGREE << XENON_DLL_PHSEL0_SHIFT) |
+		(XENON_DLL_PHASE_90_DEGREE << XENON_DLL_PHSEL1_SHIFT));
+
+	reg &= ~XENON_DLL_BYPASS_EN;
+	reg |= phy_regs->dll_update;
+	if (priv->phy_type == EMMC_5_1_PHY)
+		reg &= ~XENON_DLL_REFCLK_SEL;
+	sdhci_writel(host, reg, phy_regs->dll_ctrl);
+
+	/* Wait max 32 ms */
+	timeout = ktime_add_ms(ktime_get(), 32);
+	while (1) {
+		bool timedout = ktime_after(ktime_get(), timeout);
+
+		if (sdhci_readw(host, XENON_SLOT_EXT_PRESENT_STATE) &
+		    XENON_DLL_LOCK_STATE)
+			break;
+		if (timedout) {
+			dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n");
+			return -ETIMEDOUT;
+		}
+		udelay(100);
+	}
+	return 0;
+}
+
+/*
+ * Config to eMMC PHY to prepare for tuning.
+ * Enable HW DLL and set the TUNING_STEP
+ */
+static int xenon_emmc_phy_config_tuning(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_params *params = priv->phy_params;
+	u32 reg, tuning_step;
+	int ret;
+
+	if (host->clock <= MMC_HIGH_52_MAX_DTR)
+		return -EINVAL;
+
+	ret = xenon_emmc_phy_enable_dll(host);
+	if (ret)
+		return ret;
+
+	/* Achieve TUNING_STEP with HW DLL help */
+	reg = sdhci_readl(host, XENON_SLOT_DLL_CUR_DLY_VAL);
+	tuning_step = reg / params->tun_step_divider;
+	if (unlikely(tuning_step > XENON_TUNING_STEP_MASK)) {
+		dev_warn(mmc_dev(host->mmc),
+			 "HS200 TUNING_STEP %d is larger than MAX value\n",
+			 tuning_step);
+		tuning_step = XENON_TUNING_STEP_MASK;
+	}
+
+	/* Set TUNING_STEP for later tuning */
+	reg = sdhci_readl(host, XENON_SLOT_OP_STATUS_CTRL);
+	reg &= ~(XENON_TUN_CONSECUTIVE_TIMES_MASK <<
+		 XENON_TUN_CONSECUTIVE_TIMES_SHIFT);
+	reg |= (params->nr_tun_times << XENON_TUN_CONSECUTIVE_TIMES_SHIFT);
+	reg &= ~(XENON_TUNING_STEP_MASK << XENON_TUNING_STEP_SHIFT);
+	reg |= (tuning_step << XENON_TUNING_STEP_SHIFT);
+	sdhci_writel(host, reg, XENON_SLOT_OP_STATUS_CTRL);
+
+	return 0;
+}
+
+static void xenon_emmc_phy_disable_strobe(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	u32 reg;
+
+	/* Disable both SDHC Data Strobe and Enhanced Strobe */
+	reg = sdhci_readl(host, XENON_SLOT_EMMC_CTRL);
+	reg &= ~(XENON_ENABLE_DATA_STROBE | XENON_ENABLE_RESP_STROBE);
+	sdhci_writel(host, reg, XENON_SLOT_EMMC_CTRL);
+
+	/* Clear Strobe line Pull down or Pull up */
+	if (priv->phy_type == EMMC_5_0_PHY) {
+		reg = sdhci_readl(host, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+		reg &= ~(XENON_EMMC5_FC_QSP_PD | XENON_EMMC5_FC_QSP_PU);
+		sdhci_writel(host, reg, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+	} else {
+		reg = sdhci_readl(host, XENON_EMMC_PHY_PAD_CONTROL1);
+		reg &= ~(XENON_EMMC5_1_FC_QSP_PD | XENON_EMMC5_1_FC_QSP_PU);
+		sdhci_writel(host, reg, XENON_EMMC_PHY_PAD_CONTROL1);
+	}
+}
+
+/* Set HS400 Data Strobe and Enhanced Strobe */
+static void xenon_emmc_phy_strobe_delay_adj(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	u32 reg;
+
+	if (WARN_ON(host->timing != MMC_TIMING_MMC_HS400))
+		return;
+
+	if (host->clock <= MMC_HIGH_52_MAX_DTR)
+		return;
+
+	dev_dbg(mmc_dev(host->mmc), "starts HS400 strobe delay adjustment\n");
+
+	xenon_emmc_phy_enable_dll(host);
+
+	/* Enable SDHC Data Strobe */
+	reg = sdhci_readl(host, XENON_SLOT_EMMC_CTRL);
+	reg |= XENON_ENABLE_DATA_STROBE;
+	/*
+	 * Enable SDHC Enhanced Strobe if supported
+	 * Xenon Enhanced Strobe should be enabled only when
+	 * 1. card is in HS400 mode and
+	 * 2. SDCLK is higher than 52MHz
+	 * 3. DLL is enabled
+	 */
+	if (host->mmc->ios.enhanced_strobe)
+		reg |= XENON_ENABLE_RESP_STROBE;
+	sdhci_writel(host, reg, XENON_SLOT_EMMC_CTRL);
+
+	/* Set Data Strobe Pull down */
+	if (priv->phy_type == EMMC_5_0_PHY) {
+		reg = sdhci_readl(host, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+		reg |= XENON_EMMC5_FC_QSP_PD;
+		reg &= ~XENON_EMMC5_FC_QSP_PU;
+		sdhci_writel(host, reg, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+	} else {
+		reg = sdhci_readl(host, XENON_EMMC_PHY_PAD_CONTROL1);
+		reg |= XENON_EMMC5_1_FC_QSP_PD;
+		reg &= ~XENON_EMMC5_1_FC_QSP_PU;
+		sdhci_writel(host, reg, XENON_EMMC_PHY_PAD_CONTROL1);
+	}
+}
+
+/*
+ * If eMMC PHY Slow Mode is required in lower speed mode (SDCLK < 55MHz)
+ * in SDR mode, enable Slow Mode to bypass eMMC PHY.
+ * SDIO slower SDR mode also requires Slow Mode.
+ *
+ * If Slow Mode is enabled, return true.
+ * Otherwise, return false.
+ */
+static bool xenon_emmc_phy_slow_mode(struct sdhci_host *host,
+				     unsigned char timing)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_params *params = priv->phy_params;
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	u32 reg;
+	int ret;
+
+	if (host->clock > MMC_HIGH_52_MAX_DTR)
+		return false;
+
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	/* When in slower SDR mode, enable Slow Mode for SDIO
+	 * or when Slow Mode flag is set
+	 */
+	switch (timing) {
+	case MMC_TIMING_LEGACY:
+		/*
+		 * If Slow Mode is required, enable Slow Mode by default
+		 * in early init phase to avoid any potential issue.
+		 */
+		if (params->slow_mode) {
+			reg |= XENON_TIMING_ADJUST_SLOW_MODE;
+			ret = true;
+		} else {
+			reg &= ~XENON_TIMING_ADJUST_SLOW_MODE;
+			ret = false;
+		}
+		break;
+	case MMC_TIMING_UHS_SDR25:
+	case MMC_TIMING_UHS_SDR12:
+	case MMC_TIMING_SD_HS:
+	case MMC_TIMING_MMC_HS:
+		if ((priv->init_card_type == MMC_TYPE_SDIO) ||
+		    params->slow_mode) {
+			reg |= XENON_TIMING_ADJUST_SLOW_MODE;
+			ret = true;
+			break;
+		}
+		/* else: fall through */
+	default:
+		reg &= ~XENON_TIMING_ADJUST_SLOW_MODE;
+		ret = false;
+	}
+
+	sdhci_writel(host, reg, phy_regs->timing_adj);
+	return ret;
+}
+
+/*
+ * Set-up eMMC 5.0/5.1 PHY.
+ * Specific configuration depends on the current speed mode in use.
+ */
+static void xenon_emmc_phy_set(struct sdhci_host *host,
+			       unsigned char timing)
+{
+	u32 reg;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_params *params = priv->phy_params;
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+
+	dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting starts\n");
+
+	/* Setup pad, set bit[28] and bits[26:24] */
+	reg = sdhci_readl(host, phy_regs->pad_ctrl);
+	reg |= (XENON_FC_DQ_RECEN | XENON_FC_CMD_RECEN |
+		XENON_FC_QSP_RECEN | XENON_OEN_QSN);
+	/* All FC_XX_RECEIVCE should be set as CMOS Type */
+	reg |= XENON_FC_ALL_CMOS_RECEIVER;
+	sdhci_writel(host, reg, phy_regs->pad_ctrl);
+
+	/* Set CMD and DQ Pull Up */
+	if (priv->phy_type == EMMC_5_0_PHY) {
+		reg = sdhci_readl(host, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+		reg |= (XENON_EMMC5_FC_CMD_PU | XENON_EMMC5_FC_DQ_PU);
+		reg &= ~(XENON_EMMC5_FC_CMD_PD | XENON_EMMC5_FC_DQ_PD);
+		sdhci_writel(host, reg, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+	} else {
+		reg = sdhci_readl(host, XENON_EMMC_PHY_PAD_CONTROL1);
+		reg |= (XENON_EMMC5_1_FC_CMD_PU | XENON_EMMC5_1_FC_DQ_PU);
+		reg &= ~(XENON_EMMC5_1_FC_CMD_PD | XENON_EMMC5_1_FC_DQ_PD);
+		sdhci_writel(host, reg, XENON_EMMC_PHY_PAD_CONTROL1);
+	}
+
+	if (timing == MMC_TIMING_LEGACY) {
+		xenon_emmc_phy_slow_mode(host, timing);
+		goto phy_init;
+	}
+
+	/*
+	 * If SDIO card, set SDIO Mode
+	 * Otherwise, clear SDIO Mode
+	 */
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	if (priv->init_card_type == MMC_TYPE_SDIO)
+		reg |= XENON_TIMING_ADJUST_SDIO_MODE;
+	else
+		reg &= ~XENON_TIMING_ADJUST_SDIO_MODE;
+	sdhci_writel(host, reg, phy_regs->timing_adj);
+
+	if (xenon_emmc_phy_slow_mode(host, timing))
+		goto phy_init;
+
+	/*
+	 * Set preferred ZNR and ZPR value
+	 * The ZNR and ZPR value vary between different boards.
+	 * Define them both in sdhci-xenon-emmc-phy.h.
+	 */
+	reg = sdhci_readl(host, phy_regs->pad_ctrl2);
+	reg &= ~((XENON_ZNR_MASK << XENON_ZNR_SHIFT) | XENON_ZPR_MASK);
+	reg |= ((params->znr << XENON_ZNR_SHIFT) | params->zpr);
+	sdhci_writel(host, reg, phy_regs->pad_ctrl2);
+
+	/*
+	 * When setting EMMC_PHY_FUNC_CONTROL register,
+	 * SD clock should be disabled
+	 */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg &= ~SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+	reg = sdhci_readl(host, phy_regs->func_ctrl);
+	switch (timing) {
+	case MMC_TIMING_MMC_HS400:
+		reg |= (XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) |
+		       XENON_CMD_DDR_MODE;
+		reg &= ~XENON_DQ_ASYNC_MODE;
+		break;
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_MMC_DDR52:
+		reg |= (XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) |
+		       XENON_CMD_DDR_MODE | XENON_DQ_ASYNC_MODE;
+		break;
+	default:
+		reg &= ~((XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) |
+			 XENON_CMD_DDR_MODE);
+		reg |= XENON_DQ_ASYNC_MODE;
+	}
+	sdhci_writel(host, reg, phy_regs->func_ctrl);
+
+	/* Enable bus clock */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+	if (timing == MMC_TIMING_MMC_HS400)
+		/* Hardware team recommend a value for HS400 */
+		sdhci_writel(host, phy_regs->logic_timing_val,
+			     phy_regs->logic_timing_adj);
+	else
+		xenon_emmc_phy_disable_strobe(host);
+
+phy_init:
+	xenon_emmc_phy_init(host);
+
+	dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting completes\n");
+}
+
+static int get_dt_pad_ctrl_data(struct sdhci_host *host,
+				struct device_node *np,
+				struct xenon_emmc_phy_params *params)
+{
+	int ret = 0;
+	const char *name;
+	struct resource iomem;
+
+	if (of_device_is_compatible(np, "marvell,armada-3700-sdhci"))
+		params->pad_ctrl.set_soc_pad = armada_3700_soc_pad_voltage_set;
+	else
+		return 0;
+
+	if (of_address_to_resource(np, 1, &iomem)) {
+		dev_err(mmc_dev(host->mmc), "Unable to find SoC PAD ctrl register address for %s\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	params->pad_ctrl.reg = devm_ioremap_resource(mmc_dev(host->mmc),
+						     &iomem);
+	if (IS_ERR(params->pad_ctrl.reg))
+		return PTR_ERR(params->pad_ctrl.reg);
+
+	ret = of_property_read_string(np, "marvell,pad-type", &name);
+	if (ret) {
+		dev_err(mmc_dev(host->mmc), "Unable to determine SoC PHY PAD ctrl type\n");
+		return ret;
+	}
+	if (!strcmp(name, "sd")) {
+		params->pad_ctrl.pad_type = SOC_PAD_SD;
+	} else if (!strcmp(name, "fixed-1-8v")) {
+		params->pad_ctrl.pad_type = SOC_PAD_FIXED_1_8V;
+	} else {
+		dev_err(mmc_dev(host->mmc), "Unsupported SoC PHY PAD ctrl type %s\n",
+			name);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int xenon_emmc_phy_parse_param_dt(struct sdhci_host *host,
+					 struct device_node *np,
+					 struct xenon_emmc_phy_params *params)
+{
+	u32 value;
+
+	params->slow_mode = false;
+	if (of_property_read_bool(np, "marvell,xenon-phy-slow-mode"))
+		params->slow_mode = true;
+
+	params->znr = XENON_ZNR_DEF_VALUE;
+	if (!of_property_read_u32(np, "marvell,xenon-phy-znr", &value))
+		params->znr = value & XENON_ZNR_MASK;
+
+	params->zpr = XENON_ZPR_DEF_VALUE;
+	if (!of_property_read_u32(np, "marvell,xenon-phy-zpr", &value))
+		params->zpr = value & XENON_ZPR_MASK;
+
+	params->nr_tun_times = XENON_TUN_CONSECUTIVE_TIMES;
+	if (!of_property_read_u32(np, "marvell,xenon-phy-nr-success-tun",
+				  &value))
+		params->nr_tun_times = value & XENON_TUN_CONSECUTIVE_TIMES_MASK;
+
+	params->tun_step_divider = XENON_TUNING_STEP_DIVIDER;
+	if (!of_property_read_u32(np, "marvell,xenon-phy-tun-step-divider",
+				  &value))
+		params->tun_step_divider = value & 0xFF;
+
+	return get_dt_pad_ctrl_data(host, np, params);
+}
+
+/* Set SoC PHY Voltage PAD */
+void xenon_soc_pad_ctrl(struct sdhci_host *host,
+			unsigned char signal_voltage)
+{
+	xenon_emmc_phy_set_soc_pad(host, signal_voltage);
+}
+
+/*
+ * Setting PHY when card is working in High Speed Mode.
+ * HS400 set Data Strobe and Enhanced Strobe if it is supported.
+ * HS200/SDR104 set tuning config to prepare for tuning.
+ */
+static int xenon_hs_delay_adj(struct sdhci_host *host)
+{
+	int ret = 0;
+
+	if (WARN_ON(host->clock <= XENON_DEFAULT_SDCLK_FREQ))
+		return -EINVAL;
+
+	switch (host->timing) {
+	case MMC_TIMING_MMC_HS400:
+		xenon_emmc_phy_strobe_delay_adj(host);
+		return 0;
+	case MMC_TIMING_MMC_HS200:
+	case MMC_TIMING_UHS_SDR104:
+		return xenon_emmc_phy_config_tuning(host);
+	case MMC_TIMING_MMC_DDR52:
+	case MMC_TIMING_UHS_DDR50:
+		/*
+		 * DDR Mode requires driver to scan Sampling Fixed Delay Line,
+		 * to find out a perfect operation sampling point.
+		 * It is hard to implement such a scan in host driver
+		 * since initiating commands by host driver is not safe.
+		 * Thus so far just keep PHY Sampling Fixed Delay in
+		 * default value of DDR mode.
+		 *
+		 * If any timing issue occurs in DDR mode on Marvell products,
+		 * please contact maintainer for internal support in Marvell.
+		 */
+		dev_warn_once(mmc_dev(host->mmc), "Timing issue might occur in DDR mode\n");
+		return 0;
+	}
+
+	return ret;
+}
+
+/*
+ * Adjust PHY setting.
+ * PHY setting should be adjusted when SDCLK frequency, Bus Width
+ * or Speed Mode is changed.
+ * Additional config are required when card is working in High Speed mode,
+ * after leaving Legacy Mode.
+ */
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int ret = 0;
+
+	if (!host->clock) {
+		priv->clock = 0;
+		return 0;
+	}
+
+	/*
+	 * The timing, frequency or bus width is changed,
+	 * better to set eMMC PHY based on current setting
+	 * and adjust Xenon SDHC delay.
+	 */
+	if ((host->clock == priv->clock) &&
+	    (ios->bus_width == priv->bus_width) &&
+	    (ios->timing == priv->timing))
+		return 0;
+
+	xenon_emmc_phy_set(host, ios->timing);
+
+	/* Update the record */
+	priv->bus_width = ios->bus_width;
+
+	priv->timing = ios->timing;
+	priv->clock = host->clock;
+
+	/* Legacy mode is a special case */
+	if (ios->timing == MMC_TIMING_LEGACY)
+		return 0;
+
+	if (host->clock > XENON_DEFAULT_SDCLK_FREQ)
+		ret = xenon_hs_delay_adj(host);
+	return ret;
+}
+
+static int xenon_add_phy(struct device_node *np, struct sdhci_host *host,
+			 const char *phy_name)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int ret;
+
+	priv->phy_type = match_string(phy_types, NR_PHY_TYPES, phy_name);
+	if (priv->phy_type < 0) {
+		dev_err(mmc_dev(host->mmc),
+			"Unable to determine PHY name %s. Use default eMMC 5.1 PHY\n",
+			phy_name);
+		priv->phy_type = EMMC_5_1_PHY;
+	}
+
+	ret = xenon_alloc_emmc_phy(host);
+	if (ret)
+		return ret;
+
+	return xenon_emmc_phy_parse_param_dt(host, np, priv->phy_params);
+}
+
+int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host)
+{
+	const char *phy_type = NULL;
+
+	if (!of_property_read_string(np, "marvell,xenon-phy-type", &phy_type))
+		return xenon_add_phy(np, host, phy_type);
+
+	return xenon_add_phy(np, host, "emmc 5.1 phy");
+}