diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-08 03:43:31 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-08 03:43:31 +0000 |
commit | 1327913aeadf5737e7ebf158f93632d6df2eba1d (patch) | |
tree | 2ca5c2a3aa381788eca2580f72a2d5c60934b28a /drivers/mmc | |
parent | Adding upstream version 4.19.260. (diff) | |
download | linux-1327913aeadf5737e7ebf158f93632d6df2eba1d.tar.xz linux-1327913aeadf5737e7ebf158f93632d6df2eba1d.zip |
Adding upstream version 4.19.269.upstream/4.19.269
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/core/core.c | 8 | ||||
-rw-r--r-- | drivers/mmc/core/sd.c | 3 | ||||
-rw-r--r-- | drivers/mmc/core/sdio_bus.c | 3 | ||||
-rw-r--r-- | drivers/mmc/host/au1xmmc.c | 3 | ||||
-rw-r--r-- | drivers/mmc/host/moxart-mmc.c | 17 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-pci-core.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci.c | 71 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci.h | 12 | ||||
-rw-r--r-- | drivers/mmc/host/wmt-sdmmc.c | 5 |
9 files changed, 87 insertions, 37 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index e340791a8..6937f39fe 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1461,7 +1461,13 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr) mmc_power_cycle(host, ocr); } else { bit = fls(ocr) - 1; - ocr &= 3 << bit; + /* + * The bit variable represents the highest voltage bit set in + * the OCR register. + * To keep a range of 2 values (e.g. 3.2V/3.3V and 3.3V/3.4V), + * we must shift the mask '3' with (bit - 1). + */ + ocr &= 3 << (bit - 1); if (bit != host->ios.vdd) dev_warn(mmc_dev(host), "exceeding card's volts\n"); } diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index c179c4984..fc775c440 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -787,7 +787,8 @@ try_again: * the CCS bit is set as well. We deliberately deviate from the spec in * regards to this, which allows UHS-I to be supported for SDSC cards. */ - if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) { + if (!mmc_host_is_spi(host) && (ocr & SD_OCR_S18R) && + rocr && (*rocr & SD_ROCR_S18A)) { err = mmc_set_uhs_voltage(host, pocr); if (err == -EAGAIN) { retries--; diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index b6d8203e4..8aebdc4ff 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -264,7 +264,8 @@ static void sdio_release_func(struct device *dev) { struct sdio_func *func = dev_to_sdio_func(dev); - sdio_free_func_cis(func); + if (!(func->card->quirks & MMC_QUIRK_NONSTD_SDIO)) + sdio_free_func_cis(func); kfree(func->info); kfree(func->tmpbuf); diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 9b4be6733..7cd0551ae 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -1118,8 +1118,9 @@ out5: if (host->platdata && host->platdata->cd_setup && !(mmc->caps & MMC_CAP_NEEDS_POLL)) host->platdata->cd_setup(mmc, 0); -out_clk: + clk_disable_unprepare(host->clk); +out_clk: clk_put(host->clk); out_irq: free_irq(host->irq, host); diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c index 5c81dc737..1552d1f09 100644 --- a/drivers/mmc/host/moxart-mmc.c +++ b/drivers/mmc/host/moxart-mmc.c @@ -111,8 +111,8 @@ #define CLK_DIV_MASK 0x7f /* REG_BUS_WIDTH */ -#define BUS_WIDTH_8 BIT(2) -#define BUS_WIDTH_4 BIT(1) +#define BUS_WIDTH_4_SUPPORT BIT(3) +#define BUS_WIDTH_4 BIT(2) #define BUS_WIDTH_1 BIT(0) #define MMC_VDD_360 23 @@ -527,9 +527,6 @@ static void moxart_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_BUS_WIDTH_4: writel(BUS_WIDTH_4, host->base + REG_BUS_WIDTH); break; - case MMC_BUS_WIDTH_8: - writel(BUS_WIDTH_8, host->base + REG_BUS_WIDTH); - break; default: writel(BUS_WIDTH_1, host->base + REG_BUS_WIDTH); break; @@ -646,16 +643,8 @@ static int moxart_probe(struct platform_device *pdev) dmaengine_slave_config(host->dma_chan_rx, &cfg); } - switch ((readl(host->base + REG_BUS_WIDTH) >> 3) & 3) { - case 1: + if (readl(host->base + REG_BUS_WIDTH) & BUS_WIDTH_4_SUPPORT) mmc->caps |= MMC_CAP_4_BIT_DATA; - break; - case 2: - mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; - break; - default: - break; - } writel(0, host->base + REG_INTERRUPT_MASK); diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index cb4a0458f..fecab3633 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -1532,6 +1532,8 @@ static int amd_probe(struct sdhci_pci_chip *chip) } } + pci_dev_put(smbus_dev); + if (gen == AMD_CHIPSET_BEFORE_ML || gen == AMD_CHIPSET_CZ) chip->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 8ff37f06e..57be129fe 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -13,6 +13,7 @@ * - JMicron (hardware and technical support) */ +#include <linux/bitfield.h> #include <linux/delay.h> #include <linux/ktime.h> #include <linux/highmem.h> @@ -263,6 +264,7 @@ static void sdhci_init(struct sdhci_host *host, int soft) if (soft) { /* force clock reconfiguration */ host->clock = 0; + host->reinit_uhs = true; mmc->ops->set_ios(mmc, &mmc->ios); } } @@ -1418,10 +1420,9 @@ u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); pre_val = sdhci_get_preset_value(host); - div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK) - >> SDHCI_PRESET_SDCLK_FREQ_SHIFT; + div = FIELD_GET(SDHCI_PRESET_SDCLK_FREQ_MASK, pre_val); if (host->clk_mul && - (pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) { + (pre_val & SDHCI_PRESET_CLKGEN_SEL)) { clk = SDHCI_PROG_CLOCK_MODE; real_div = div + 1; clk_mul = host->clk_mul; @@ -1736,11 +1737,46 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing) } EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling); +static bool sdhci_timing_has_preset(unsigned char timing) +{ + switch (timing) { + case MMC_TIMING_UHS_SDR12: + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_SDR50: + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + return true; + }; + return false; +} + +static bool sdhci_preset_needed(struct sdhci_host *host, unsigned char timing) +{ + return !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) && + sdhci_timing_has_preset(timing); +} + +static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_ios *ios) +{ + /* + * Preset Values are: Driver Strength, Clock Generator and SDCLK/RCLK + * Frequency. Check if preset values need to be enabled, or the Driver + * Strength needs updating. Note, clock changes are handled separately. + */ + return !host->preset_enabled && + (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type); +} + void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct sdhci_host *host = mmc_priv(mmc); + bool reinit_uhs = host->reinit_uhs; + bool turning_on_clk = false; u8 ctrl; + host->reinit_uhs = false; + if (ios->power_mode == MMC_POWER_UNDEFINED) return; @@ -1766,6 +1802,8 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) sdhci_enable_preset_value(host, false); if (!ios->clock || ios->clock != host->clock) { + turning_on_clk = ios->clock && !host->clock; + host->ops->set_clock(host, ios->clock); host->clock = ios->clock; @@ -1792,6 +1830,17 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->ops->set_bus_width(host, ios->bus_width); + /* + * Special case to avoid multiple clock changes during voltage + * switching. + */ + if (!reinit_uhs && + turning_on_clk && + host->timing == ios->timing && + host->version >= SDHCI_SPEC_300 && + !sdhci_presetable_values_change(host, ios)) + return; + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); if (!(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)) { @@ -1835,6 +1884,7 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + host->drv_type = ios->drv_type; } else { /* * According to SDHC Spec v3.00, if the Preset Value @@ -1862,19 +1912,14 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->ops->set_uhs_signaling(host, ios->timing); host->timing = ios->timing; - if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) && - ((ios->timing == MMC_TIMING_UHS_SDR12) || - (ios->timing == MMC_TIMING_UHS_SDR25) || - (ios->timing == MMC_TIMING_UHS_SDR50) || - (ios->timing == MMC_TIMING_UHS_SDR104) || - (ios->timing == MMC_TIMING_UHS_DDR50) || - (ios->timing == MMC_TIMING_MMC_DDR52))) { + if (sdhci_preset_needed(host, ios->timing)) { u16 preset; sdhci_enable_preset_value(host, true); preset = sdhci_get_preset_value(host); - ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK) - >> SDHCI_PRESET_DRV_SHIFT; + ios->drv_type = FIELD_GET(SDHCI_PRESET_DRV_MASK, + preset); + host->drv_type = ios->drv_type; } /* Re-enable SD Clock */ @@ -3128,6 +3173,7 @@ int sdhci_resume_host(struct sdhci_host *host) sdhci_init(host, 0); host->pwr = 0; host->clock = 0; + host->reinit_uhs = true; mmc->ops->set_ios(mmc, &mmc->ios); } else { sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER)); @@ -3191,6 +3237,7 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) /* Force clock and power re-program */ host->pwr = 0; host->clock = 0; + host->reinit_uhs = true; mmc->ops->start_signal_voltage_switch(mmc, &mmc->ios); mmc->ops->set_ios(mmc, &mmc->ios); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 2959fed39..fe610331e 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -13,6 +13,7 @@ #ifndef __SDHCI_HW_H #define __SDHCI_HW_H +#include <linux/bits.h> #include <linux/scatterlist.h> #include <linux/compiler.h> #include <linux/types.h> @@ -259,12 +260,9 @@ #define SDHCI_PRESET_FOR_SDR104 0x6C #define SDHCI_PRESET_FOR_DDR50 0x6E #define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */ -#define SDHCI_PRESET_DRV_MASK 0xC000 -#define SDHCI_PRESET_DRV_SHIFT 14 -#define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400 -#define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10 -#define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF -#define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0 +#define SDHCI_PRESET_DRV_MASK GENMASK(15, 14) +#define SDHCI_PRESET_CLKGEN_SEL BIT(10) +#define SDHCI_PRESET_SDCLK_FREQ_MASK GENMASK(9, 0) #define SDHCI_SLOT_INT_STATUS 0xFC @@ -503,6 +501,8 @@ struct sdhci_host { unsigned int clock; /* Current clock (MHz) */ u8 pwr; /* Current voltage */ + u8 drv_type; /* Current UHS-I driver type */ + bool reinit_uhs; /* Force UHS-related re-initialization */ bool runtime_suspended; /* Host is runtime suspended */ bool bus_on; /* Bus power prevents runtime suspend */ diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c index 3ba42f508..f8b169684 100644 --- a/drivers/mmc/host/wmt-sdmmc.c +++ b/drivers/mmc/host/wmt-sdmmc.c @@ -853,7 +853,7 @@ static int wmt_mci_probe(struct platform_device *pdev) if (IS_ERR(priv->clk_sdmmc)) { dev_err(&pdev->dev, "Error getting clock\n"); ret = PTR_ERR(priv->clk_sdmmc); - goto fail5; + goto fail5_and_a_half; } ret = clk_prepare_enable(priv->clk_sdmmc); @@ -870,6 +870,9 @@ static int wmt_mci_probe(struct platform_device *pdev) return 0; fail6: clk_put(priv->clk_sdmmc); +fail5_and_a_half: + dma_free_coherent(&pdev->dev, mmc->max_blk_count * 16, + priv->dma_desc_buffer, priv->dma_desc_device_addr); fail5: free_irq(dma_irq, priv); fail4: |