Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 342 insertions, 0 deletions

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
new file mode 100644
index 000000000..c77f53732
--- /dev/null
+++ b/drivers/mtd/Kconfig
@@ -0,0 +1,342 @@
+menuconfig MTD
+	tristate "Memory Technology Device (MTD) support"
+	help
+	  Memory Technology Devices are flash, RAM and similar chips, often
+	  used for solid state file systems on embedded devices. This option
+	  will provide the generic support for MTD drivers to register
+	  themselves with the kernel and for potential users of MTD devices
+	  to enumerate the devices which are present and obtain a handle on
+	  them. It will also allow you to select individual drivers for
+	  particular hardware and users of MTD devices. If unsure, say N.
+
+if MTD
+
+config MTD_TESTS
+	tristate "MTD tests support (DANGEROUS)"
+	depends on m
+	help
+	  This option includes various MTD tests into compilation. The tests
+	  should normally be compiled as kernel modules. The modules perform
+	  various checks and verifications when loaded.
+
+	  WARNING: some of the tests will ERASE entire MTD device which they
+	  test. Do not use these tests unless you really know what you do.
+
+config MTD_REDBOOT_PARTS
+	tristate "RedBoot partition table parsing"
+	help
+	  RedBoot is a ROM monitor and bootloader which deals with multiple
+	  'images' in flash devices by putting a table one of the erase
+	  blocks on the device, similar to a partition table, which gives
+	  the offsets, lengths and names of all the images stored in the
+	  flash.
+
+	  If you need code which can detect and parse this table, and register
+	  MTD 'partitions' corresponding to each image in the table, enable
+	  this option.
+
+	  You will still need the parsing functions to be called by the driver
+	  for your particular device. It won't happen automatically. The
+	  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for
+	  example.
+
+if MTD_REDBOOT_PARTS
+
+config MTD_REDBOOT_DIRECTORY_BLOCK
+	int "Location of RedBoot partition table"
+	default "-1"
+	help
+	  This option is the Linux counterpart to the
+	  CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time
+	  option.
+
+	  The option specifies which Flash sectors holds the RedBoot
+	  partition table.  A zero or positive value gives an absolute
+	  erase block number. A negative value specifies a number of
+	  sectors before the end of the device.
+
+	  For example "2" means block number 2, "-1" means the last
+	  block and "-2" means the penultimate block.
+
+config MTD_REDBOOT_PARTS_UNALLOCATED
+	bool "Include unallocated flash regions"
+	help
+	  If you need to register each unallocated flash region as a MTD
+	  'partition', enable this option.
+
+config MTD_REDBOOT_PARTS_READONLY
+	bool "Force read-only for RedBoot system images"
+	help
+	  If you need to force read-only for 'RedBoot', 'RedBoot Config' and
+	  'FIS directory' images, enable this option.
+
+endif # MTD_REDBOOT_PARTS
+
+config MTD_CMDLINE_PARTS
+	tristate "Command line partition table parsing"
+	depends on MTD
+	help
+	  Allow generic configuration of the MTD partition tables via the kernel
+	  command line. Multiple flash resources are supported for hardware where
+	  different kinds of flash memory are available.
+
+	  You will still need the parsing functions to be called by the driver
+	  for your particular device. It won't happen automatically. The
+	  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for
+	  example.
+
+	  The format for the command line is as follows:
+
+	  mtdparts=<mtddef>[;<mtddef]
+	  <mtddef>  := <mtd-id>:<partdef>[,<partdef>]
+	  <partdef> := <size>[@offset][<name>][ro]
+	  <mtd-id>  := unique id used in mapping driver/device
+	  <size>    := standard linux memsize OR "-" to denote all
+	  remaining space
+	  <name>    := (NAME)
+
+	  Due to the way Linux handles the command line, no spaces are
+	  allowed in the partition definition, including mtd id's and partition
+	  names.
+
+	  Examples:
+
+	  1 flash resource (mtd-id "sa1100"), with 1 single writable partition:
+	  mtdparts=sa1100:-
+
+	  Same flash, but 2 named partitions, the first one being read-only:
+	  mtdparts=sa1100:256k(ARMboot)ro,-(root)
+
+	  If unsure, say 'N'.
+
+config MTD_AFS_PARTS
+	tristate "ARM Firmware Suite partition parsing"
+	depends on (ARM || ARM64)
+	help
+	  The ARM Firmware Suite allows the user to divide flash devices into
+	  multiple 'images'. Each such image has a header containing its name
+	  and offset/size etc.
+
+	  If you need code which can detect and parse these tables, and
+	  register MTD 'partitions' corresponding to each image detected,
+	  enable this option.
+
+	  You will still need the parsing functions to be called by the driver
+	  for your particular device. It won't happen automatically. The
+	  'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
+
+config MTD_OF_PARTS
+	tristate "OpenFirmware partitioning information support"
+	default y
+	depends on OF
+	help
+	  This provides a partition parsing function which derives
+	  the partition map from the children of the flash node,
+	  as described in Documentation/devicetree/bindings/mtd/partition.txt.
+
+config MTD_AR7_PARTS
+	tristate "TI AR7 partitioning support"
+	help
+	  TI AR7 partitioning support
+
+config MTD_BCM63XX_PARTS
+	tristate "BCM63XX CFE partitioning support"
+	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+	select CRC32
+	help
+	  This provides partions parsing for BCM63xx devices with CFE
+	  bootloaders.
+
+config MTD_BCM47XX_PARTS
+	tristate "BCM47XX partitioning support"
+	depends on BCM47XX || ARCH_BCM_5301X
+	help
+	  This provides partitions parser for devices based on BCM47xx
+	  boards.
+
+menu "Partition parsers"
+source "drivers/mtd/parsers/Kconfig"
+endmenu
+
+comment "User Modules And Translation Layers"
+
+#
+# MTD block device support is select'ed if needed
+#
+config MTD_BLKDEVS
+	tristate
+
+config MTD_BLOCK
+	tristate "Caching block device access to MTD devices"
+	depends on BLOCK
+	select MTD_BLKDEVS
+	help
+	  Although most flash chips have an erase size too large to be useful
+	  as block devices, it is possible to use MTD devices which are based
+	  on RAM chips in this manner. This block device is a user of MTD
+	  devices performing that function.
+
+	  At the moment, it is also required for the Journalling Flash File
+	  System(s) to obtain a handle on the MTD device when it's mounted
+	  (although JFFS and JFFS2 don't actually use any of the functionality
+	  of the mtdblock device).
+
+	  Later, it may be extended to perform read/erase/modify/write cycles
+	  on flash chips to emulate a smaller block size. Needless to say,
+	  this is very unsafe, but could be useful for file systems which are
+	  almost never written to.
+
+	  You do not need this option for use with the DiskOnChip devices. For
+	  those, enable NFTL support (CONFIG_NFTL) instead.
+
+config MTD_BLOCK_RO
+	tristate "Readonly block device access to MTD devices"
+	depends on MTD_BLOCK!=y && BLOCK
+	select MTD_BLKDEVS
+	help
+	  This allows you to mount read-only file systems (such as cramfs)
+	  from an MTD device, without the overhead (and danger) of the caching
+	  driver.
+
+	  You do not need this option for use with the DiskOnChip devices. For
+	  those, enable NFTL support (CONFIG_NFTL) instead.
+
+config FTL
+	tristate "FTL (Flash Translation Layer) support"
+	depends on BLOCK
+	select MTD_BLKDEVS
+	help
+	  This provides support for the original Flash Translation Layer which
+	  is part of the PCMCIA specification. It uses a kind of pseudo-
+	  file system on a flash device to emulate a block device with
+	  512-byte sectors, on top of which you put a 'normal' file system.
+
+	  You may find that the algorithms used in this code are patented
+	  unless you live in the Free World where software patents aren't
+	  legal - in the USA you are only permitted to use this on PCMCIA
+	  hardware, although under the terms of the GPL you're obviously
+	  permitted to copy, modify and distribute the code as you wish. Just
+	  not use it.
+
+config NFTL
+	tristate "NFTL (NAND Flash Translation Layer) support"
+	depends on BLOCK
+	select MTD_BLKDEVS
+	help
+	  This provides support for the NAND Flash Translation Layer which is
+	  used on M-Systems' DiskOnChip devices. It uses a kind of pseudo-
+	  file system on a flash device to emulate a block device with
+	  512-byte sectors, on top of which you put a 'normal' file system.
+
+	  You may find that the algorithms used in this code are patented
+	  unless you live in the Free World where software patents aren't
+	  legal - in the USA you are only permitted to use this on DiskOnChip
+	  hardware, although under the terms of the GPL you're obviously
+	  permitted to copy, modify and distribute the code as you wish. Just
+	  not use it.
+
+config NFTL_RW
+	bool "Write support for NFTL"
+	depends on NFTL
+	help
+	  Support for writing to the NAND Flash Translation Layer, as used
+	  on the DiskOnChip.
+
+config INFTL
+	tristate "INFTL (Inverse NAND Flash Translation Layer) support"
+	depends on BLOCK
+	select MTD_BLKDEVS
+	help
+	  This provides support for the Inverse NAND Flash Translation
+	  Layer which is used on M-Systems' newer DiskOnChip devices. It
+	  uses a kind of pseudo-file system on a flash device to emulate
+	  a block device with 512-byte sectors, on top of which you put
+	  a 'normal' file system.
+
+	  You may find that the algorithms used in this code are patented
+	  unless you live in the Free World where software patents aren't
+	  legal - in the USA you are only permitted to use this on DiskOnChip
+	  hardware, although under the terms of the GPL you're obviously
+	  permitted to copy, modify and distribute the code as you wish. Just
+	  not use it.
+
+config RFD_FTL
+	tristate "Resident Flash Disk (Flash Translation Layer) support"
+	depends on BLOCK
+	select MTD_BLKDEVS
+	help
+	  This provides support for the flash translation layer known
+	  as the Resident Flash Disk (RFD), as used by the Embedded BIOS
+	  of General Software. There is a blurb at:
+
+		http://www.gensw.com/pages/prod/bios/rfd.htm
+
+config SSFDC
+	tristate "NAND SSFDC (SmartMedia) read only translation layer"
+	depends on BLOCK
+	select MTD_BLKDEVS
+	help
+	  This enables read only access to SmartMedia formatted NAND
+	  flash. You can mount it with FAT file system.
+
+
+config SM_FTL
+	tristate "SmartMedia/xD new translation layer"
+	depends on BLOCK
+	select MTD_BLKDEVS
+	select MTD_NAND_ECC
+	help
+	  This enables EXPERIMENTAL R/W support for SmartMedia/xD
+	  FTL (Flash translation layer).
+	  Write support is only lightly tested, therefore this driver
+	  isn't recommended to use with valuable data (anyway if you have
+	  valuable data, do backups regardless of software/hardware you
+	  use, because you never know what will eat your data...)
+	  If you only need R/O access, you can use older R/O driver
+	  (CONFIG_SSFDC)
+
+config MTD_OOPS
+	tristate "Log panic/oops to an MTD buffer"
+	help
+	  This enables panic and oops messages to be logged to a circular
+	  buffer in a flash partition where it can be read back at some
+	  later point.
+
+config MTD_SWAP
+	tristate "Swap on MTD device support"
+	depends on MTD && SWAP
+	select MTD_BLKDEVS
+	help
+	  Provides volatile block device driver on top of mtd partition
+	  suitable for swapping.  The mapping of written blocks is not saved.
+	  The driver provides wear leveling by storing erase counter into the
+	  OOB.
+
+config MTD_PARTITIONED_MASTER
+	bool "Retain master device when partitioned"
+	default n
+	depends on MTD
+	help
+	  For historical reasons, by default, either a master is present or
+	  several partitions are present, but not both. The concern was that
+	  data listed in multiple partitions was dangerous; however, SCSI does
+	  this and it is frequently useful for applications. This config option
+	  leaves the master in even if the device is partitioned. It also makes
+	  the parent of the partition device be the master device, rather than
+	  what lies behind the master.
+
+source "drivers/mtd/chips/Kconfig"
+
+source "drivers/mtd/maps/Kconfig"
+
+source "drivers/mtd/devices/Kconfig"
+
+source "drivers/mtd/nand/Kconfig"
+
+source "drivers/mtd/lpddr/Kconfig"
+
+source "drivers/mtd/spi-nor/Kconfig"
+
+source "drivers/mtd/ubi/Kconfig"
+
+endif # MTD