Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1433 insertions, 0 deletions

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
new file mode 100644
index 000000000..2ff6a0be9
--- /dev/null
+++ b/drivers/net/dsa/mt7530.c
@@ -0,0 +1,1433 @@
+/*
+ * Mediatek MT7530 DSA Switch driver
+ * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <linux/iopoll.h>
+#include <linux/mdio.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of_gpio.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/gpio/consumer.h>
+#include <net/dsa.h>
+
+#include "mt7530.h"
+
+/* String, offset, and register size in bytes if different from 4 bytes */
+static const struct mt7530_mib_desc mt7530_mib[] = {
+	MIB_DESC(1, 0x00, "TxDrop"),
+	MIB_DESC(1, 0x04, "TxCrcErr"),
+	MIB_DESC(1, 0x08, "TxUnicast"),
+	MIB_DESC(1, 0x0c, "TxMulticast"),
+	MIB_DESC(1, 0x10, "TxBroadcast"),
+	MIB_DESC(1, 0x14, "TxCollision"),
+	MIB_DESC(1, 0x18, "TxSingleCollision"),
+	MIB_DESC(1, 0x1c, "TxMultipleCollision"),
+	MIB_DESC(1, 0x20, "TxDeferred"),
+	MIB_DESC(1, 0x24, "TxLateCollision"),
+	MIB_DESC(1, 0x28, "TxExcessiveCollistion"),
+	MIB_DESC(1, 0x2c, "TxPause"),
+	MIB_DESC(1, 0x30, "TxPktSz64"),
+	MIB_DESC(1, 0x34, "TxPktSz65To127"),
+	MIB_DESC(1, 0x38, "TxPktSz128To255"),
+	MIB_DESC(1, 0x3c, "TxPktSz256To511"),
+	MIB_DESC(1, 0x40, "TxPktSz512To1023"),
+	MIB_DESC(1, 0x44, "Tx1024ToMax"),
+	MIB_DESC(2, 0x48, "TxBytes"),
+	MIB_DESC(1, 0x60, "RxDrop"),
+	MIB_DESC(1, 0x64, "RxFiltering"),
+	MIB_DESC(1, 0x68, "RxUnicast"),
+	MIB_DESC(1, 0x6c, "RxMulticast"),
+	MIB_DESC(1, 0x70, "RxBroadcast"),
+	MIB_DESC(1, 0x74, "RxAlignErr"),
+	MIB_DESC(1, 0x78, "RxCrcErr"),
+	MIB_DESC(1, 0x7c, "RxUnderSizeErr"),
+	MIB_DESC(1, 0x80, "RxFragErr"),
+	MIB_DESC(1, 0x84, "RxOverSzErr"),
+	MIB_DESC(1, 0x88, "RxJabberErr"),
+	MIB_DESC(1, 0x8c, "RxPause"),
+	MIB_DESC(1, 0x90, "RxPktSz64"),
+	MIB_DESC(1, 0x94, "RxPktSz65To127"),
+	MIB_DESC(1, 0x98, "RxPktSz128To255"),
+	MIB_DESC(1, 0x9c, "RxPktSz256To511"),
+	MIB_DESC(1, 0xa0, "RxPktSz512To1023"),
+	MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"),
+	MIB_DESC(2, 0xa8, "RxBytes"),
+	MIB_DESC(1, 0xb0, "RxCtrlDrop"),
+	MIB_DESC(1, 0xb4, "RxIngressDrop"),
+	MIB_DESC(1, 0xb8, "RxArlDrop"),
+};
+
+static int
+mt7623_trgmii_write(struct mt7530_priv *priv,  u32 reg, u32 val)
+{
+	int ret;
+
+	ret =  regmap_write(priv->ethernet, TRGMII_BASE(reg), val);
+	if (ret < 0)
+		dev_err(priv->dev,
+			"failed to priv write register\n");
+	return ret;
+}
+
+static u32
+mt7623_trgmii_read(struct mt7530_priv *priv, u32 reg)
+{
+	int ret;
+	u32 val;
+
+	ret = regmap_read(priv->ethernet, TRGMII_BASE(reg), &val);
+	if (ret < 0) {
+		dev_err(priv->dev,
+			"failed to priv read register\n");
+		return ret;
+	}
+
+	return val;
+}
+
+static void
+mt7623_trgmii_rmw(struct mt7530_priv *priv, u32 reg,
+		  u32 mask, u32 set)
+{
+	u32 val;
+
+	val = mt7623_trgmii_read(priv, reg);
+	val &= ~mask;
+	val |= set;
+	mt7623_trgmii_write(priv, reg, val);
+}
+
+static void
+mt7623_trgmii_set(struct mt7530_priv *priv, u32 reg, u32 val)
+{
+	mt7623_trgmii_rmw(priv, reg, 0, val);
+}
+
+static void
+mt7623_trgmii_clear(struct mt7530_priv *priv, u32 reg, u32 val)
+{
+	mt7623_trgmii_rmw(priv, reg, val, 0);
+}
+
+static int
+core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
+{
+	struct mii_bus *bus = priv->bus;
+	int value, ret;
+
+	/* Write the desired MMD Devad */
+	ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
+	if (ret < 0)
+		goto err;
+
+	/* Write the desired MMD register address */
+	ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
+	if (ret < 0)
+		goto err;
+
+	/* Select the Function : DATA with no post increment */
+	ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+	if (ret < 0)
+		goto err;
+
+	/* Read the content of the MMD's selected register */
+	value = bus->read(bus, 0, MII_MMD_DATA);
+
+	return value;
+err:
+	dev_err(&bus->dev,  "failed to read mmd register\n");
+
+	return ret;
+}
+
+static int
+core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
+			int devad, u32 data)
+{
+	struct mii_bus *bus = priv->bus;
+	int ret;
+
+	/* Write the desired MMD Devad */
+	ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
+	if (ret < 0)
+		goto err;
+
+	/* Write the desired MMD register address */
+	ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
+	if (ret < 0)
+		goto err;
+
+	/* Select the Function : DATA with no post increment */
+	ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+	if (ret < 0)
+		goto err;
+
+	/* Write the data into MMD's selected register */
+	ret = bus->write(bus, 0, MII_MMD_DATA, data);
+err:
+	if (ret < 0)
+		dev_err(&bus->dev,
+			"failed to write mmd register\n");
+	return ret;
+}
+
+static void
+core_write(struct mt7530_priv *priv, u32 reg, u32 val)
+{
+	struct mii_bus *bus = priv->bus;
+
+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
+
+	mutex_unlock(&bus->mdio_lock);
+}
+
+static void
+core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
+{
+	struct mii_bus *bus = priv->bus;
+	u32 val;
+
+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+	val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
+	val &= ~mask;
+	val |= set;
+	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
+
+	mutex_unlock(&bus->mdio_lock);
+}
+
+static void
+core_set(struct mt7530_priv *priv, u32 reg, u32 val)
+{
+	core_rmw(priv, reg, 0, val);
+}
+
+static void
+core_clear(struct mt7530_priv *priv, u32 reg, u32 val)
+{
+	core_rmw(priv, reg, val, 0);
+}
+
+static int
+mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
+{
+	struct mii_bus *bus = priv->bus;
+	u16 page, r, lo, hi;
+	int ret;
+
+	page = (reg >> 6) & 0x3ff;
+	r  = (reg >> 2) & 0xf;
+	lo = val & 0xffff;
+	hi = val >> 16;
+
+	/* MT7530 uses 31 as the pseudo port */
+	ret = bus->write(bus, 0x1f, 0x1f, page);
+	if (ret < 0)
+		goto err;
+
+	ret = bus->write(bus, 0x1f, r,  lo);
+	if (ret < 0)
+		goto err;
+
+	ret = bus->write(bus, 0x1f, 0x10, hi);
+err:
+	if (ret < 0)
+		dev_err(&bus->dev,
+			"failed to write mt7530 register\n");
+	return ret;
+}
+
+static u32
+mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
+{
+	struct mii_bus *bus = priv->bus;
+	u16 page, r, lo, hi;
+	int ret;
+
+	page = (reg >> 6) & 0x3ff;
+	r = (reg >> 2) & 0xf;
+
+	/* MT7530 uses 31 as the pseudo port */
+	ret = bus->write(bus, 0x1f, 0x1f, page);
+	if (ret < 0) {
+		dev_err(&bus->dev,
+			"failed to read mt7530 register\n");
+		return ret;
+	}
+
+	lo = bus->read(bus, 0x1f, r);
+	hi = bus->read(bus, 0x1f, 0x10);
+
+	return (hi << 16) | (lo & 0xffff);
+}
+
+static void
+mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
+{
+	struct mii_bus *bus = priv->bus;
+
+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+	mt7530_mii_write(priv, reg, val);
+
+	mutex_unlock(&bus->mdio_lock);
+}
+
+static u32
+_mt7530_read(struct mt7530_dummy_poll *p)
+{
+	struct mii_bus		*bus = p->priv->bus;
+	u32 val;
+
+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+	val = mt7530_mii_read(p->priv, p->reg);
+
+	mutex_unlock(&bus->mdio_lock);
+
+	return val;
+}
+
+static u32
+mt7530_read(struct mt7530_priv *priv, u32 reg)
+{
+	struct mt7530_dummy_poll p;
+
+	INIT_MT7530_DUMMY_POLL(&p, priv, reg);
+	return _mt7530_read(&p);
+}
+
+static void
+mt7530_rmw(struct mt7530_priv *priv, u32 reg,
+	   u32 mask, u32 set)
+{
+	struct mii_bus *bus = priv->bus;
+	u32 val;
+
+	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+	val = mt7530_mii_read(priv, reg);
+	val &= ~mask;
+	val |= set;
+	mt7530_mii_write(priv, reg, val);
+
+	mutex_unlock(&bus->mdio_lock);
+}
+
+static void
+mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val)
+{
+	mt7530_rmw(priv, reg, 0, val);
+}
+
+static void
+mt7530_clear(struct mt7530_priv *priv, u32 reg, u32 val)
+{
+	mt7530_rmw(priv, reg, val, 0);
+}
+
+static int
+mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
+{
+	u32 val;
+	int ret;
+	struct mt7530_dummy_poll p;
+
+	/* Set the command operating upon the MAC address entries */
+	val = ATC_BUSY | ATC_MAT(0) | cmd;
+	mt7530_write(priv, MT7530_ATC, val);
+
+	INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC);
+	ret = readx_poll_timeout(_mt7530_read, &p, val,
+				 !(val & ATC_BUSY), 20, 20000);
+	if (ret < 0) {
+		dev_err(priv->dev, "reset timeout\n");
+		return ret;
+	}
+
+	/* Additional sanity for read command if the specified
+	 * entry is invalid
+	 */
+	val = mt7530_read(priv, MT7530_ATC);
+	if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID))
+		return -EINVAL;
+
+	if (rsp)
+		*rsp = val;
+
+	return 0;
+}
+
+static void
+mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb)
+{
+	u32 reg[3];
+	int i;
+
+	/* Read from ARL table into an array */
+	for (i = 0; i < 3; i++) {
+		reg[i] = mt7530_read(priv, MT7530_TSRA1 + (i * 4));
+
+		dev_dbg(priv->dev, "%s(%d) reg[%d]=0x%x\n",
+			__func__, __LINE__, i, reg[i]);
+	}
+
+	fdb->vid = (reg[1] >> CVID) & CVID_MASK;
+	fdb->aging = (reg[2] >> AGE_TIMER) & AGE_TIMER_MASK;
+	fdb->port_mask = (reg[2] >> PORT_MAP) & PORT_MAP_MASK;
+	fdb->mac[0] = (reg[0] >> MAC_BYTE_0) & MAC_BYTE_MASK;
+	fdb->mac[1] = (reg[0] >> MAC_BYTE_1) & MAC_BYTE_MASK;
+	fdb->mac[2] = (reg[0] >> MAC_BYTE_2) & MAC_BYTE_MASK;
+	fdb->mac[3] = (reg[0] >> MAC_BYTE_3) & MAC_BYTE_MASK;
+	fdb->mac[4] = (reg[1] >> MAC_BYTE_4) & MAC_BYTE_MASK;
+	fdb->mac[5] = (reg[1] >> MAC_BYTE_5) & MAC_BYTE_MASK;
+	fdb->noarp = ((reg[2] >> ENT_STATUS) & ENT_STATUS_MASK) == STATIC_ENT;
+}
+
+static void
+mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
+		 u8 port_mask, const u8 *mac,
+		 u8 aging, u8 type)
+{
+	u32 reg[3] = { 0 };
+	int i;
+
+	reg[1] |= vid & CVID_MASK;
+	reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
+	reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
+	/* STATIC_ENT indicate that entry is static wouldn't
+	 * be aged out and STATIC_EMP specified as erasing an
+	 * entry
+	 */
+	reg[2] |= (type & ENT_STATUS_MASK) << ENT_STATUS;
+	reg[1] |= mac[5] << MAC_BYTE_5;
+	reg[1] |= mac[4] << MAC_BYTE_4;
+	reg[0] |= mac[3] << MAC_BYTE_3;
+	reg[0] |= mac[2] << MAC_BYTE_2;
+	reg[0] |= mac[1] << MAC_BYTE_1;
+	reg[0] |= mac[0] << MAC_BYTE_0;
+
+	/* Write array into the ARL table */
+	for (i = 0; i < 3; i++)
+		mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]);
+}
+
+static int
+mt7530_pad_clk_setup(struct dsa_switch *ds, int mode)
+{
+	struct mt7530_priv *priv = ds->priv;
+	u32 ncpo1, ssc_delta, trgint, i;
+
+	switch (mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		trgint = 0;
+		ncpo1 = 0x0c80;
+		ssc_delta = 0x87;
+		break;
+	case PHY_INTERFACE_MODE_TRGMII:
+		trgint = 1;
+		ncpo1 = 0x1400;
+		ssc_delta = 0x57;
+		break;
+	default:
+		dev_err(priv->dev, "xMII mode %d not supported\n", mode);
+		return -EINVAL;
+	}
+
+	mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
+		   P6_INTF_MODE(trgint));
+
+	/* Lower Tx Driving for TRGMII path */
+	for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
+		mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
+			     TD_DM_DRVP(8) | TD_DM_DRVN(8));
+
+	/* Setup core clock for MT7530 */
+	if (!trgint) {
+		/* Disable MT7530 core clock */
+		core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
+
+		/* Disable PLL, since phy_device has not yet been created
+		 * provided for phy_[read,write]_mmd_indirect is called, we
+		 * provide our own core_write_mmd_indirect to complete this
+		 * function.
+		 */
+		core_write_mmd_indirect(priv,
+					CORE_GSWPLL_GRP1,
+					MDIO_MMD_VEND2,
+					0);
+
+		/* Set core clock into 500Mhz */
+		core_write(priv, CORE_GSWPLL_GRP2,
+			   RG_GSWPLL_POSDIV_500M(1) |
+			   RG_GSWPLL_FBKDIV_500M(25));
+
+		/* Enable PLL */
+		core_write(priv, CORE_GSWPLL_GRP1,
+			   RG_GSWPLL_EN_PRE |
+			   RG_GSWPLL_POSDIV_200M(2) |
+			   RG_GSWPLL_FBKDIV_200M(32));
+
+		/* Enable MT7530 core clock */
+		core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
+	}
+
+	/* Setup the MT7530 TRGMII Tx Clock */
+	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
+	core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
+	core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
+	core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
+	core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
+	core_write(priv, CORE_PLL_GROUP4,
+		   RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
+		   RG_SYSPLL_BIAS_LPF_EN);
+	core_write(priv, CORE_PLL_GROUP2,
+		   RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
+		   RG_SYSPLL_POSDIV(1));
+	core_write(priv, CORE_PLL_GROUP7,
+		   RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
+		   RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
+	core_set(priv, CORE_TRGMII_GSW_CLK_CG,
+		 REG_GSWCK_EN | REG_TRGMIICK_EN);
+
+	if (!trgint)
+		for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
+			mt7530_rmw(priv, MT7530_TRGMII_RD(i),
+				   RD_TAP_MASK, RD_TAP(16));
+	else
+		mt7623_trgmii_set(priv, GSW_INTF_MODE, INTF_MODE_TRGMII);
+
+	return 0;
+}
+
+static int
+mt7623_pad_clk_setup(struct dsa_switch *ds)
+{
+	struct mt7530_priv *priv = ds->priv;
+	int i;
+
+	for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
+		mt7623_trgmii_write(priv, GSW_TRGMII_TD_ODT(i),
+				    TD_DM_DRVP(8) | TD_DM_DRVN(8));
+
+	mt7623_trgmii_set(priv, GSW_TRGMII_RCK_CTRL, RX_RST | RXC_DQSISEL);
+	mt7623_trgmii_clear(priv, GSW_TRGMII_RCK_CTRL, RX_RST);
+
+	return 0;
+}
+
+static void
+mt7530_mib_reset(struct dsa_switch *ds)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_FLUSH);
+	mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
+}
+
+static void
+mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable)
+{
+	u32 mask = PMCR_TX_EN | PMCR_RX_EN | PMCR_FORCE_LNK;
+
+	if (enable)
+		mt7530_set(priv, MT7530_PMCR_P(port), mask);
+	else
+		mt7530_clear(priv, MT7530_PMCR_P(port), mask);
+}
+
+static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	return mdiobus_read_nested(priv->bus, port, regnum);
+}
+
+static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum,
+			    u16 val)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	return mdiobus_write_nested(priv->bus, port, regnum, val);
+}
+
+static void
+mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+		   uint8_t *data)
+{
+	int i;
+
+	if (stringset != ETH_SS_STATS)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++)
+		strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name,
+			ETH_GSTRING_LEN);
+}
+
+static void
+mt7530_get_ethtool_stats(struct dsa_switch *ds, int port,
+			 uint64_t *data)
+{
+	struct mt7530_priv *priv = ds->priv;
+	const struct mt7530_mib_desc *mib;
+	u32 reg, i;
+	u64 hi;
+
+	for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) {
+		mib = &mt7530_mib[i];
+		reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset;
+
+		data[i] = mt7530_read(priv, reg);
+		if (mib->size == 2) {
+			hi = mt7530_read(priv, reg + 4);
+			data[i] |= hi << 32;
+		}
+	}
+}
+
+static int
+mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+	if (sset != ETH_SS_STATS)
+		return 0;
+
+	return ARRAY_SIZE(mt7530_mib);
+}
+
+static void mt7530_adjust_link(struct dsa_switch *ds, int port,
+			       struct phy_device *phydev)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	if (phy_is_pseudo_fixed_link(phydev)) {
+		dev_dbg(priv->dev, "phy-mode for master device = %x\n",
+			phydev->interface);
+
+		/* Setup TX circuit incluing relevant PAD and driving */
+		mt7530_pad_clk_setup(ds, phydev->interface);
+
+		/* Setup RX circuit, relevant PAD and driving on the host
+		 * which must be placed after the setup on the device side is
+		 * all finished.
+		 */
+		mt7623_pad_clk_setup(ds);
+	} else {
+		u16 lcl_adv = 0, rmt_adv = 0;
+		u8 flowctrl;
+		u32 mcr = PMCR_USERP_LINK | PMCR_FORCE_MODE;
+
+		switch (phydev->speed) {
+		case SPEED_1000:
+			mcr |= PMCR_FORCE_SPEED_1000;
+			break;
+		case SPEED_100:
+			mcr |= PMCR_FORCE_SPEED_100;
+			break;
+		};
+
+		if (phydev->link)
+			mcr |= PMCR_FORCE_LNK;
+
+		if (phydev->duplex) {
+			mcr |= PMCR_FORCE_FDX;
+
+			if (phydev->pause)
+				rmt_adv = LPA_PAUSE_CAP;
+			if (phydev->asym_pause)
+				rmt_adv |= LPA_PAUSE_ASYM;
+
+			if (phydev->advertising & ADVERTISED_Pause)
+				lcl_adv |= ADVERTISE_PAUSE_CAP;
+			if (phydev->advertising & ADVERTISED_Asym_Pause)
+				lcl_adv |= ADVERTISE_PAUSE_ASYM;
+
+			flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
+
+			if (flowctrl & FLOW_CTRL_TX)
+				mcr |= PMCR_TX_FC_EN;
+			if (flowctrl & FLOW_CTRL_RX)
+				mcr |= PMCR_RX_FC_EN;
+		}
+		mt7530_write(priv, MT7530_PMCR_P(port), mcr);
+	}
+}
+
+static int
+mt7530_cpu_port_enable(struct mt7530_priv *priv,
+		       int port)
+{
+	/* Enable Mediatek header mode on the cpu port */
+	mt7530_write(priv, MT7530_PVC_P(port),
+		     PORT_SPEC_TAG);
+
+	/* Setup the MAC by default for the cpu port */
+	mt7530_write(priv, MT7530_PMCR_P(port), PMCR_CPUP_LINK);
+
+	/* Unknown multicast frame forwarding to the cpu port */
+	mt7530_rmw(priv, MT7530_MFC, UNM_FFP_MASK, UNM_FFP(BIT(port)));
+
+	/* CPU port gets connected to all user ports of
+	 * the switch
+	 */
+	mt7530_write(priv, MT7530_PCR_P(port),
+		     PCR_MATRIX(dsa_user_ports(priv->ds)));
+
+	return 0;
+}
+
+static int
+mt7530_port_enable(struct dsa_switch *ds, int port,
+		   struct phy_device *phy)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	mutex_lock(&priv->reg_mutex);
+
+	/* Setup the MAC for the user port */
+	mt7530_write(priv, MT7530_PMCR_P(port), PMCR_USERP_LINK);
+
+	/* Allow the user port gets connected to the cpu port and also
+	 * restore the port matrix if the port is the member of a certain
+	 * bridge.
+	 */
+	priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT));
+	priv->ports[port].enable = true;
+	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
+		   priv->ports[port].pm);
+	mt7530_port_set_status(priv, port, 1);
+
+	mutex_unlock(&priv->reg_mutex);
+
+	return 0;
+}
+
+static void
+mt7530_port_disable(struct dsa_switch *ds, int port,
+		    struct phy_device *phy)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	mutex_lock(&priv->reg_mutex);
+
+	/* Clear up all port matrix which could be restored in the next
+	 * enablement for the port.
+	 */
+	priv->ports[port].enable = false;
+	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
+		   PCR_MATRIX_CLR);
+	mt7530_port_set_status(priv, port, 0);
+
+	mutex_unlock(&priv->reg_mutex);
+}
+
+static void
+mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+	struct mt7530_priv *priv = ds->priv;
+	u32 stp_state;
+
+	switch (state) {
+	case BR_STATE_DISABLED:
+		stp_state = MT7530_STP_DISABLED;
+		break;
+	case BR_STATE_BLOCKING:
+		stp_state = MT7530_STP_BLOCKING;
+		break;
+	case BR_STATE_LISTENING:
+		stp_state = MT7530_STP_LISTENING;
+		break;
+	case BR_STATE_LEARNING:
+		stp_state = MT7530_STP_LEARNING;
+		break;
+	case BR_STATE_FORWARDING:
+	default:
+		stp_state = MT7530_STP_FORWARDING;
+		break;
+	}
+
+	mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK, stp_state);
+}
+
+static int
+mt7530_port_bridge_join(struct dsa_switch *ds, int port,
+			struct net_device *bridge)
+{
+	struct mt7530_priv *priv = ds->priv;
+	u32 port_bitmap = BIT(MT7530_CPU_PORT);
+	int i;
+
+	mutex_lock(&priv->reg_mutex);
+
+	for (i = 0; i < MT7530_NUM_PORTS; i++) {
+		/* Add this port to the port matrix of the other ports in the
+		 * same bridge. If the port is disabled, port matrix is kept
+		 * and not being setup until the port becomes enabled.
+		 */
+		if (dsa_is_user_port(ds, i) && i != port) {
+			if (dsa_to_port(ds, i)->bridge_dev != bridge)
+				continue;
+			if (priv->ports[i].enable)
+				mt7530_set(priv, MT7530_PCR_P(i),
+					   PCR_MATRIX(BIT(port)));
+			priv->ports[i].pm |= PCR_MATRIX(BIT(port));
+
+			port_bitmap |= BIT(i);
+		}
+	}
+
+	/* Add the all other ports to this port matrix. */
+	if (priv->ports[port].enable)
+		mt7530_rmw(priv, MT7530_PCR_P(port),
+			   PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap));
+	priv->ports[port].pm |= PCR_MATRIX(port_bitmap);
+
+	mutex_unlock(&priv->reg_mutex);
+
+	return 0;
+}
+
+static void
+mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
+{
+	struct mt7530_priv *priv = ds->priv;
+	bool all_user_ports_removed = true;
+	int i;
+
+	/* When a port is removed from the bridge, the port would be set up
+	 * back to the default as is at initial boot which is a VLAN-unaware
+	 * port.
+	 */
+	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+		   MT7530_PORT_MATRIX_MODE);
+	mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
+		   VLAN_ATTR(MT7530_VLAN_TRANSPARENT) |
+		   PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
+
+	priv->ports[port].vlan_filtering = false;
+
+	for (i = 0; i < MT7530_NUM_PORTS; i++) {
+		if (dsa_is_user_port(ds, i) &&
+		    priv->ports[i].vlan_filtering) {
+			all_user_ports_removed = false;
+			break;
+		}
+	}
+
+	/* CPU port also does the same thing until all user ports belonging to
+	 * the CPU port get out of VLAN filtering mode.
+	 */
+	if (all_user_ports_removed) {
+		mt7530_write(priv, MT7530_PCR_P(MT7530_CPU_PORT),
+			     PCR_MATRIX(dsa_user_ports(priv->ds)));
+		mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT), PORT_SPEC_TAG
+			     | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
+	}
+}
+
+static void
+mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	/* Trapped into security mode allows packet forwarding through VLAN
+	 * table lookup. CPU port is set to fallback mode to let untagged
+	 * frames pass through.
+	 */
+	if (dsa_is_cpu_port(ds, port))
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_FALLBACK_MODE);
+	else
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_SECURITY_MODE);
+
+	/* Set the port as a user port which is to be able to recognize VID
+	 * from incoming packets before fetching entry within the VLAN table.
+	 */
+	mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
+		   VLAN_ATTR(MT7530_VLAN_USER) |
+		   PVC_EG_TAG(MT7530_VLAN_EG_DISABLED));
+}
+
+static void
+mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
+			 struct net_device *bridge)
+{
+	struct mt7530_priv *priv = ds->priv;
+	int i;
+
+	mutex_lock(&priv->reg_mutex);
+
+	for (i = 0; i < MT7530_NUM_PORTS; i++) {
+		/* Remove this port from the port matrix of the other ports
+		 * in the same bridge. If the port is disabled, port matrix
+		 * is kept and not being setup until the port becomes enabled.
+		 * And the other port's port matrix cannot be broken when the
+		 * other port is still a VLAN-aware port.
+		 */
+		if (!priv->ports[i].vlan_filtering &&
+		    dsa_is_user_port(ds, i) && i != port) {
+			if (dsa_to_port(ds, i)->bridge_dev != bridge)
+				continue;
+			if (priv->ports[i].enable)
+				mt7530_clear(priv, MT7530_PCR_P(i),
+					     PCR_MATRIX(BIT(port)));
+			priv->ports[i].pm &= ~PCR_MATRIX(BIT(port));
+		}
+	}
+
+	/* Set the cpu port to be the only one in the port matrix of
+	 * this port.
+	 */
+	if (priv->ports[port].enable)
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
+			   PCR_MATRIX(BIT(MT7530_CPU_PORT)));
+	priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT));
+
+	mt7530_port_set_vlan_unaware(ds, port);
+
+	mutex_unlock(&priv->reg_mutex);
+}
+
+static int
+mt7530_port_fdb_add(struct dsa_switch *ds, int port,
+		    const unsigned char *addr, u16 vid)
+{
+	struct mt7530_priv *priv = ds->priv;
+	int ret;
+	u8 port_mask = BIT(port);
+
+	mutex_lock(&priv->reg_mutex);
+	mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT);
+	ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
+	mutex_unlock(&priv->reg_mutex);
+
+	return ret;
+}
+
+static int
+mt7530_port_fdb_del(struct dsa_switch *ds, int port,
+		    const unsigned char *addr, u16 vid)
+{
+	struct mt7530_priv *priv = ds->priv;
+	int ret;
+	u8 port_mask = BIT(port);
+
+	mutex_lock(&priv->reg_mutex);
+	mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_EMP);
+	ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
+	mutex_unlock(&priv->reg_mutex);
+
+	return ret;
+}
+
+static int
+mt7530_port_fdb_dump(struct dsa_switch *ds, int port,
+		     dsa_fdb_dump_cb_t *cb, void *data)
+{
+	struct mt7530_priv *priv = ds->priv;
+	struct mt7530_fdb _fdb = { 0 };
+	int cnt = MT7530_NUM_FDB_RECORDS;
+	int ret = 0;
+	u32 rsp = 0;
+
+	mutex_lock(&priv->reg_mutex);
+
+	ret = mt7530_fdb_cmd(priv, MT7530_FDB_START, &rsp);
+	if (ret < 0)
+		goto err;
+
+	do {
+		if (rsp & ATC_SRCH_HIT) {
+			mt7530_fdb_read(priv, &_fdb);
+			if (_fdb.port_mask & BIT(port)) {
+				ret = cb(_fdb.mac, _fdb.vid, _fdb.noarp,
+					 data);
+				if (ret < 0)
+					break;
+			}
+		}
+	} while (--cnt &&
+		 !(rsp & ATC_SRCH_END) &&
+		 !mt7530_fdb_cmd(priv, MT7530_FDB_NEXT, &rsp));
+err:
+	mutex_unlock(&priv->reg_mutex);
+
+	return 0;
+}
+
+static int
+mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
+{
+	struct mt7530_dummy_poll p;
+	u32 val;
+	int ret;
+
+	val = VTCR_BUSY | VTCR_FUNC(cmd) | vid;
+	mt7530_write(priv, MT7530_VTCR, val);
+
+	INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR);
+	ret = readx_poll_timeout(_mt7530_read, &p, val,
+				 !(val & VTCR_BUSY), 20, 20000);
+	if (ret < 0) {
+		dev_err(priv->dev, "poll timeout\n");
+		return ret;
+	}
+
+	val = mt7530_read(priv, MT7530_VTCR);
+	if (val & VTCR_INVALID) {
+		dev_err(priv->dev, "read VTCR invalid\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int
+mt7530_port_vlan_filtering(struct dsa_switch *ds, int port,
+			   bool vlan_filtering)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	priv->ports[port].vlan_filtering = vlan_filtering;
+
+	if (vlan_filtering) {
+		/* The port is being kept as VLAN-unaware port when bridge is
+		 * set up with vlan_filtering not being set, Otherwise, the
+		 * port and the corresponding CPU port is required the setup
+		 * for becoming a VLAN-aware port.
+		 */
+		mt7530_port_set_vlan_aware(ds, port);
+		mt7530_port_set_vlan_aware(ds, MT7530_CPU_PORT);
+	}
+
+	return 0;
+}
+
+static int
+mt7530_port_vlan_prepare(struct dsa_switch *ds, int port,
+			 const struct switchdev_obj_port_vlan *vlan)
+{
+	/* nothing needed */
+
+	return 0;
+}
+
+static void
+mt7530_hw_vlan_add(struct mt7530_priv *priv,
+		   struct mt7530_hw_vlan_entry *entry)
+{
+	u8 new_members;
+	u32 val;
+
+	new_members = entry->old_members | BIT(entry->port) |
+		      BIT(MT7530_CPU_PORT);
+
+	/* Validate the entry with independent learning, create egress tag per
+	 * VLAN and joining the port as one of the port members.
+	 */
+	val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | VLAN_VALID;
+	mt7530_write(priv, MT7530_VAWD1, val);
+
+	/* Decide whether adding tag or not for those outgoing packets from the
+	 * port inside the VLAN.
+	 */
+	val = entry->untagged ? MT7530_VLAN_EGRESS_UNTAG :
+				MT7530_VLAN_EGRESS_TAG;
+	mt7530_rmw(priv, MT7530_VAWD2,
+		   ETAG_CTRL_P_MASK(entry->port),
+		   ETAG_CTRL_P(entry->port, val));
+
+	/* CPU port is always taken as a tagged port for serving more than one
+	 * VLANs across and also being applied with egress type stack mode for
+	 * that VLAN tags would be appended after hardware special tag used as
+	 * DSA tag.
+	 */
+	mt7530_rmw(priv, MT7530_VAWD2,
+		   ETAG_CTRL_P_MASK(MT7530_CPU_PORT),
+		   ETAG_CTRL_P(MT7530_CPU_PORT,
+			       MT7530_VLAN_EGRESS_STACK));
+}
+
+static void
+mt7530_hw_vlan_del(struct mt7530_priv *priv,
+		   struct mt7530_hw_vlan_entry *entry)
+{
+	u8 new_members;
+	u32 val;
+
+	new_members = entry->old_members & ~BIT(entry->port);
+
+	val = mt7530_read(priv, MT7530_VAWD1);
+	if (!(val & VLAN_VALID)) {
+		dev_err(priv->dev,
+			"Cannot be deleted due to invalid entry\n");
+		return;
+	}
+
+	/* If certain member apart from CPU port is still alive in the VLAN,
+	 * the entry would be kept valid. Otherwise, the entry is got to be
+	 * disabled.
+	 */
+	if (new_members && new_members != BIT(MT7530_CPU_PORT)) {
+		val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) |
+		      VLAN_VALID;
+		mt7530_write(priv, MT7530_VAWD1, val);
+	} else {
+		mt7530_write(priv, MT7530_VAWD1, 0);
+		mt7530_write(priv, MT7530_VAWD2, 0);
+	}
+}
+
+static void
+mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid,
+		      struct mt7530_hw_vlan_entry *entry,
+		      mt7530_vlan_op vlan_op)
+{
+	u32 val;
+
+	/* Fetch entry */
+	mt7530_vlan_cmd(priv, MT7530_VTCR_RD_VID, vid);
+
+	val = mt7530_read(priv, MT7530_VAWD1);
+
+	entry->old_members = (val >> PORT_MEM_SHFT) & PORT_MEM_MASK;
+
+	/* Manipulate entry */
+	vlan_op(priv, entry);
+
+	/* Flush result to hardware */
+	mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, vid);
+}
+
+static void
+mt7530_port_vlan_add(struct dsa_switch *ds, int port,
+		     const struct switchdev_obj_port_vlan *vlan)
+{
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+	struct mt7530_hw_vlan_entry new_entry;
+	struct mt7530_priv *priv = ds->priv;
+	u16 vid;
+
+	/* The port is kept as VLAN-unaware if bridge with vlan_filtering not
+	 * being set.
+	 */
+	if (!priv->ports[port].vlan_filtering)
+		return;
+
+	mutex_lock(&priv->reg_mutex);
+
+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+		mt7530_hw_vlan_entry_init(&new_entry, port, untagged);
+		mt7530_hw_vlan_update(priv, vid, &new_entry,
+				      mt7530_hw_vlan_add);
+	}
+
+	if (pvid) {
+		mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
+			   G0_PORT_VID(vlan->vid_end));
+		priv->ports[port].pvid = vlan->vid_end;
+	}
+
+	mutex_unlock(&priv->reg_mutex);
+}
+
+static int
+mt7530_port_vlan_del(struct dsa_switch *ds, int port,
+		     const struct switchdev_obj_port_vlan *vlan)
+{
+	struct mt7530_hw_vlan_entry target_entry;
+	struct mt7530_priv *priv = ds->priv;
+	u16 vid, pvid;
+
+	/* The port is kept as VLAN-unaware if bridge with vlan_filtering not
+	 * being set.
+	 */
+	if (!priv->ports[port].vlan_filtering)
+		return 0;
+
+	mutex_lock(&priv->reg_mutex);
+
+	pvid = priv->ports[port].pvid;
+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+		mt7530_hw_vlan_entry_init(&target_entry, port, 0);
+		mt7530_hw_vlan_update(priv, vid, &target_entry,
+				      mt7530_hw_vlan_del);
+
+		/* PVID is being restored to the default whenever the PVID port
+		 * is being removed from the VLAN.
+		 */
+		if (pvid == vid)
+			pvid = G0_PORT_VID_DEF;
+	}
+
+	mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, pvid);
+	priv->ports[port].pvid = pvid;
+
+	mutex_unlock(&priv->reg_mutex);
+
+	return 0;
+}
+
+static enum dsa_tag_protocol
+mtk_get_tag_protocol(struct dsa_switch *ds, int port)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	if (port != MT7530_CPU_PORT) {
+		dev_warn(priv->dev,
+			 "port not matched with tagging CPU port\n");
+		return DSA_TAG_PROTO_NONE;
+	} else {
+		return DSA_TAG_PROTO_MTK;
+	}
+}
+
+static int
+mt7530_setup(struct dsa_switch *ds)
+{
+	struct mt7530_priv *priv = ds->priv;
+	int ret, i;
+	u32 id, val;
+	struct device_node *dn;
+	struct mt7530_dummy_poll p;
+
+	/* The parent node of master netdev which holds the common system
+	 * controller also is the container for two GMACs nodes representing
+	 * as two netdev instances.
+	 */
+	dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent;
+	priv->ethernet = syscon_node_to_regmap(dn);
+	if (IS_ERR(priv->ethernet))
+		return PTR_ERR(priv->ethernet);
+
+	regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
+	ret = regulator_enable(priv->core_pwr);
+	if (ret < 0) {
+		dev_err(priv->dev,
+			"Failed to enable core power: %d\n", ret);
+		return ret;
+	}
+
+	regulator_set_voltage(priv->io_pwr, 3300000, 3300000);
+	ret = regulator_enable(priv->io_pwr);
+	if (ret < 0) {
+		dev_err(priv->dev, "Failed to enable io pwr: %d\n",
+			ret);
+		return ret;
+	}
+
+	/* Reset whole chip through gpio pin or memory-mapped registers for
+	 * different type of hardware
+	 */
+	if (priv->mcm) {
+		reset_control_assert(priv->rstc);
+		usleep_range(1000, 1100);
+		reset_control_deassert(priv->rstc);
+	} else {
+		gpiod_set_value_cansleep(priv->reset, 0);
+		usleep_range(1000, 1100);
+		gpiod_set_value_cansleep(priv->reset, 1);
+	}
+
+	/* Waiting for MT7530 got to stable */
+	INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
+	ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
+				 20, 1000000);
+	if (ret < 0) {
+		dev_err(priv->dev, "reset timeout\n");
+		return ret;
+	}
+
+	id = mt7530_read(priv, MT7530_CREV);
+	id >>= CHIP_NAME_SHIFT;
+	if (id != MT7530_ID) {
+		dev_err(priv->dev, "chip %x can't be supported\n", id);
+		return -ENODEV;
+	}
+
+	/* Reset the switch through internal reset */
+	mt7530_write(priv, MT7530_SYS_CTRL,
+		     SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
+		     SYS_CTRL_REG_RST);
+
+	/* Enable Port 6 only; P5 as GMAC5 which currently is not supported */
+	val = mt7530_read(priv, MT7530_MHWTRAP);
+	val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
+	val |= MHWTRAP_MANUAL;
+	mt7530_write(priv, MT7530_MHWTRAP, val);
+
+	/* Enable and reset MIB counters */
+	mt7530_mib_reset(ds);
+
+	for (i = 0; i < MT7530_NUM_PORTS; i++) {
+		/* Disable forwarding by default on all ports */
+		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
+			   PCR_MATRIX_CLR);
+
+		if (dsa_is_cpu_port(ds, i))
+			mt7530_cpu_port_enable(priv, i);
+		else
+			mt7530_port_disable(ds, i, NULL);
+
+		/* Enable consistent egress tag */
+		mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
+			   PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
+	}
+
+	/* Flush the FDB table */
+	ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static const struct dsa_switch_ops mt7530_switch_ops = {
+	.get_tag_protocol	= mtk_get_tag_protocol,
+	.setup			= mt7530_setup,
+	.get_strings		= mt7530_get_strings,
+	.phy_read		= mt7530_phy_read,
+	.phy_write		= mt7530_phy_write,
+	.get_ethtool_stats	= mt7530_get_ethtool_stats,
+	.get_sset_count		= mt7530_get_sset_count,
+	.adjust_link		= mt7530_adjust_link,
+	.port_enable		= mt7530_port_enable,
+	.port_disable		= mt7530_port_disable,
+	.port_stp_state_set	= mt7530_stp_state_set,
+	.port_bridge_join	= mt7530_port_bridge_join,
+	.port_bridge_leave	= mt7530_port_bridge_leave,
+	.port_fdb_add		= mt7530_port_fdb_add,
+	.port_fdb_del		= mt7530_port_fdb_del,
+	.port_fdb_dump		= mt7530_port_fdb_dump,
+	.port_vlan_filtering	= mt7530_port_vlan_filtering,
+	.port_vlan_prepare	= mt7530_port_vlan_prepare,
+	.port_vlan_add		= mt7530_port_vlan_add,
+	.port_vlan_del		= mt7530_port_vlan_del,
+};
+
+static int
+mt7530_probe(struct mdio_device *mdiodev)
+{
+	struct mt7530_priv *priv;
+	struct device_node *dn;
+
+	dn = mdiodev->dev.of_node;
+
+	priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS);
+	if (!priv->ds)
+		return -ENOMEM;
+
+	/* Use medatek,mcm property to distinguish hardware type that would
+	 * casues a little bit differences on power-on sequence.
+	 */
+	priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
+	if (priv->mcm) {
+		dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
+
+		priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
+		if (IS_ERR(priv->rstc)) {
+			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
+			return PTR_ERR(priv->rstc);
+		}
+	}
+
+	priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
+	if (IS_ERR(priv->core_pwr))
+		return PTR_ERR(priv->core_pwr);
+
+	priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
+	if (IS_ERR(priv->io_pwr))
+		return PTR_ERR(priv->io_pwr);
+
+	/* Not MCM that indicates switch works as the remote standalone
+	 * integrated circuit so the GPIO pin would be used to complete
+	 * the reset, otherwise memory-mapped register accessing used
+	 * through syscon provides in the case of MCM.
+	 */
+	if (!priv->mcm) {
+		priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
+						      GPIOD_OUT_LOW);
+		if (IS_ERR(priv->reset)) {
+			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
+			return PTR_ERR(priv->reset);
+		}
+	}
+
+	priv->bus = mdiodev->bus;
+	priv->dev = &mdiodev->dev;
+	priv->ds->priv = priv;
+	priv->ds->ops = &mt7530_switch_ops;
+	mutex_init(&priv->reg_mutex);
+	dev_set_drvdata(&mdiodev->dev, priv);
+
+	return dsa_register_switch(priv->ds);
+}
+
+static void
+mt7530_remove(struct mdio_device *mdiodev)
+{
+	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
+	int ret = 0;
+
+	ret = regulator_disable(priv->core_pwr);
+	if (ret < 0)
+		dev_err(priv->dev,
+			"Failed to disable core power: %d\n", ret);
+
+	ret = regulator_disable(priv->io_pwr);
+	if (ret < 0)
+		dev_err(priv->dev, "Failed to disable io pwr: %d\n",
+			ret);
+
+	dsa_unregister_switch(priv->ds);
+	mutex_destroy(&priv->reg_mutex);
+}
+
+static const struct of_device_id mt7530_of_match[] = {
+	{ .compatible = "mediatek,mt7530" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mt7530_of_match);
+
+static struct mdio_driver mt7530_mdio_driver = {
+	.probe  = mt7530_probe,
+	.remove = mt7530_remove,
+	.mdiodrv.driver = {
+		.name = "mt7530",
+		.of_match_table = mt7530_of_match,
+	},
+};
+
+mdio_module_driver(mt7530_mdio_driver);
+
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
+MODULE_LICENSE("GPL");