Adding upstream version 4.19.260.upstream/4.19.260

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 61 insertions, 9 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_client.c b/drivers/net/ethernet/intel/i40e/i40e_client.c
index c1832a848..2fa4becda 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_client.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_client.c
@@ -178,6 +178,10 @@ void i40e_notify_client_of_netdev_close(struct i40e_vsi *vsi, bool reset)
 			"Cannot locate client instance close routine\n");
 		return;
 	}
+	if (!test_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state)) {
+		dev_dbg(&pf->pdev->dev, "Client is not open, abort close\n");
+		return;
+	}
 	cdev->client->ops->close(&cdev->lan_info, cdev->client, reset);
 	clear_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state);
 	i40e_client_release_qvlist(&cdev->lan_info);
@@ -376,7 +380,6 @@ void i40e_client_subtask(struct i40e_pf *pf)
 				/* Remove failed client instance */
 				clear_bit(__I40E_CLIENT_INSTANCE_OPENED,
 					  &cdev->state);
-				i40e_client_del_instance(pf);
 				return;
 			}
 		}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 3615c6533..9669d8c8b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -397,7 +397,9 @@ static void i40e_tx_timeout(struct net_device *netdev)
 		set_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state);
 		break;
 	default:
-		netdev_err(netdev, "tx_timeout recovery unsuccessful\n");
+		netdev_err(netdev, "tx_timeout recovery unsuccessful, device is in non-recoverable state.\n");
+		set_bit(__I40E_DOWN_REQUESTED, pf->state);
+		set_bit(__I40E_VSI_DOWN_REQUESTED, vsi->state);
 		break;
 	}
 
@@ -1808,11 +1810,15 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 		 * non-zero req_queue_pairs says that user requested a new
 		 * queue count via ethtool's set_channels, so use this
 		 * value for queues distribution across traffic classes
+		 * We need at least one queue pair for the interface
+		 * to be usable as we see in else statement.
 		 */
 		if (vsi->req_queue_pairs > 0)
 			vsi->num_queue_pairs = vsi->req_queue_pairs;
 		else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 			vsi->num_queue_pairs = pf->num_lan_msix;
+		else
+			vsi->num_queue_pairs = 1;
 	}
 
 	/* Number of queues per enabled TC */
@@ -5482,6 +5488,26 @@ static int i40e_get_link_speed(struct i40e_vsi *vsi)
 }
 
 /**
+ * i40e_bw_bytes_to_mbits - Convert max_tx_rate from bytes to mbits
+ * @vsi: Pointer to vsi structure
+ * @max_tx_rate: max TX rate in bytes to be converted into Mbits
+ *
+ * Helper function to convert units before send to set BW limit
+ **/
+static u64 i40e_bw_bytes_to_mbits(struct i40e_vsi *vsi, u64 max_tx_rate)
+{
+	if (max_tx_rate < I40E_BW_MBPS_DIVISOR) {
+		dev_warn(&vsi->back->pdev->dev,
+			 "Setting max tx rate to minimum usable value of 50Mbps.\n");
+		max_tx_rate = I40E_BW_CREDIT_DIVISOR;
+	} else {
+		do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR);
+	}
+
+	return max_tx_rate;
+}
+
+/**
  * i40e_set_bw_limit - setup BW limit for Tx traffic based on max_tx_rate
  * @vsi: VSI to be configured
  * @seid: seid of the channel/VSI
@@ -5503,10 +5529,10 @@ int i40e_set_bw_limit(struct i40e_vsi *vsi, u16 seid, u64 max_tx_rate)
 			max_tx_rate, seid);
 		return -EINVAL;
 	}
-	if (max_tx_rate && max_tx_rate < 50) {
+	if (max_tx_rate && max_tx_rate < I40E_BW_CREDIT_DIVISOR) {
 		dev_warn(&pf->pdev->dev,
 			 "Setting max tx rate to minimum usable value of 50Mbps.\n");
-		max_tx_rate = 50;
+		max_tx_rate = I40E_BW_CREDIT_DIVISOR;
 	}
 
 	/* Tx rate credits are in values of 50Mbps, 0 is disabled */
@@ -6943,9 +6969,9 @@ config_tc:
 
 	if (pf->flags & I40E_FLAG_TC_MQPRIO) {
 		if (vsi->mqprio_qopt.max_rate[0]) {
-			u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0];
+			u64 max_tx_rate = i40e_bw_bytes_to_mbits(vsi,
+						  vsi->mqprio_qopt.max_rate[0]);
 
-			do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR);
 			ret = i40e_set_bw_limit(vsi, vsi->seid, max_tx_rate);
 			if (!ret) {
 				u64 credits = max_tx_rate;
@@ -9607,10 +9633,10 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 	}
 
 	if (vsi->mqprio_qopt.max_rate[0]) {
-		u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0];
+		u64 max_tx_rate = i40e_bw_bytes_to_mbits(vsi,
+						  vsi->mqprio_qopt.max_rate[0]);
 		u64 credits = 0;
 
-		do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR);
 		ret = i40e_set_bw_limit(vsi, vsi->seid, max_tx_rate);
 		if (ret)
 			goto end_unlock;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index a39a8fe07..973350b34 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1713,6 +1713,25 @@ static void i40e_del_qch(struct i40e_vf *vf)
 }
 
 /**
+ * i40e_vc_get_max_frame_size
+ * @vf: pointer to the VF
+ *
+ * Max frame size is determined based on the current port's max frame size and
+ * whether a port VLAN is configured on this VF. The VF is not aware whether
+ * it's in a port VLAN so the PF needs to account for this in max frame size
+ * checks and sending the max frame size to the VF.
+ **/
+static u16 i40e_vc_get_max_frame_size(struct i40e_vf *vf)
+{
+	u16 max_frame_size = vf->pf->hw.phy.link_info.max_frame_size;
+
+	if (vf->port_vlan_id)
+		max_frame_size -= VLAN_HLEN;
+
+	return max_frame_size;
+}
+
+/**
  * i40e_vc_get_vf_resources_msg
  * @vf: pointer to the VF info
  * @msg: pointer to the msg buffer
@@ -1814,6 +1833,7 @@ static int i40e_vc_get_vf_resources_msg(struct i40e_vf *vf, u8 *msg)
 	vfres->max_vectors = pf->hw.func_caps.num_msix_vectors_vf;
 	vfres->rss_key_size = I40E_HKEY_ARRAY_SIZE;
 	vfres->rss_lut_size = I40E_VF_HLUT_ARRAY_SIZE;
+	vfres->max_mtu = i40e_vc_get_max_frame_size(vf);
 
 	if (vf->lan_vsi_idx) {
 		vfres->vsi_res[0].vsi_id = vf->lan_vsi_id;
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index b56d22b53..1bf9734ae 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -115,8 +115,11 @@ u32 i40evf_get_tx_pending(struct i40e_ring *ring, bool in_sw)
 {
 	u32 head, tail;
 
+	/* underlying hardware might not allow access and/or always return
+	 * 0 for the head/tail registers so just use the cached values
+	 */
 	head = ring->next_to_clean;
-	tail = readl(ring->tail);
+	tail = ring->next_to_use;
 
 	if (head != tail)
 		return (head < tail) ?