Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 10713 insertions, 0 deletions

diff --git a/drivers/net/ethernet/toshiba/Kconfig b/drivers/net/ethernet/toshiba/Kconfig
new file mode 100644
index 000000000..6f1d5b623
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/Kconfig
@@ -0,0 +1,55 @@
+#
+# Toshiba network device configuration
+#
+
+config NET_VENDOR_TOSHIBA
+	bool "Toshiba devices"
+	default y
+	depends on PCI && (PPC_IBM_CELL_BLADE || MIPS) || PPC_PS3
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Toshiba cards. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_TOSHIBA
+
+config GELIC_NET
+	tristate "PS3 Gigabit Ethernet driver"
+	depends on PPC_PS3
+	select PS3_SYS_MANAGER
+	---help---
+	  This driver supports the network device on the PS3 game
+	  console.  This driver has built-in support for Ethernet.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ps3_gelic.
+
+config GELIC_WIRELESS
+	bool "PS3 Wireless support"
+	depends on GELIC_NET && WLAN
+	select WIRELESS_EXT
+	---help---
+	  This option adds the support for the wireless feature of PS3.
+	  If you have the wireless-less model of PS3 or have no plan to
+	  use wireless feature, disabling this option saves memory.  As
+	  the driver automatically distinguishes the models, you can
+	  safely enable this option even if you have a wireless-less model.
+
+config SPIDER_NET
+	tristate "Spider Gigabit Ethernet driver"
+	depends on PCI && PPC_IBM_CELL_BLADE
+	select FW_LOADER
+	select SUNGEM_PHY
+	---help---
+	  This driver supports the Gigabit Ethernet chips present on the
+	  Cell Processor-Based Blades from IBM.
+
+config TC35815
+	tristate "TOSHIBA TC35815 Ethernet support"
+	depends on PCI && MIPS
+	select PHYLIB
+
+endif # NET_VENDOR_TOSHIBA
diff --git a/drivers/net/ethernet/toshiba/Makefile b/drivers/net/ethernet/toshiba/Makefile
new file mode 100644
index 000000000..f434fd0f4
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Toshiba network device drivers.
+#
+
+obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
+gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
+ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
+spidernet-y += spider_net.o spider_net_ethtool.o
+obj-$(CONFIG_SPIDER_NET) += spidernet.o
+obj-$(CONFIG_TC35815) += tc35815.o
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
new file mode 100644
index 000000000..75237c81c
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -0,0 +1,1886 @@
+/*
+ *  PS3 gelic network driver.
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2006, 2007 Sony Corporation
+ *
+ * This file is based on: spider_net.c
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Authors : Utz Bacher <utz.bacher@de.ibm.com>
+ *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#undef DEBUG
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+#include <linux/dma-mapping.h>
+#include <net/checksum.h>
+#include <asm/firmware.h>
+#include <asm/ps3.h>
+#include <asm/lv1call.h>
+
+#include "ps3_gelic_net.h"
+#include "ps3_gelic_wireless.h"
+
+#define DRV_NAME "Gelic Network Driver"
+#define DRV_VERSION "2.0"
+
+MODULE_AUTHOR("SCE Inc.");
+MODULE_DESCRIPTION("Gelic Network driver");
+MODULE_LICENSE("GPL");
+
+
+/* set irq_mask */
+int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask)
+{
+	int status;
+
+	status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
+					    mask, 0);
+	if (status)
+		dev_info(ctodev(card),
+			 "%s failed %d\n", __func__, status);
+	return status;
+}
+
+static void gelic_card_rx_irq_on(struct gelic_card *card)
+{
+	card->irq_mask |= GELIC_CARD_RXINT;
+	gelic_card_set_irq_mask(card, card->irq_mask);
+}
+static void gelic_card_rx_irq_off(struct gelic_card *card)
+{
+	card->irq_mask &= ~GELIC_CARD_RXINT;
+	gelic_card_set_irq_mask(card, card->irq_mask);
+}
+
+static void gelic_card_get_ether_port_status(struct gelic_card *card,
+					     int inform)
+{
+	u64 v2;
+	struct net_device *ether_netdev;
+
+	lv1_net_control(bus_id(card), dev_id(card),
+			GELIC_LV1_GET_ETH_PORT_STATUS,
+			GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
+			&card->ether_port_status, &v2);
+
+	if (inform) {
+		ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0];
+		if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP)
+			netif_carrier_on(ether_netdev);
+		else
+			netif_carrier_off(ether_netdev);
+	}
+}
+
+/**
+ * gelic_descr_get_status -- returns the status of a descriptor
+ * @descr: descriptor to look at
+ *
+ * returns the status as in the dmac_cmd_status field of the descriptor
+ */
+static enum gelic_descr_dma_status
+gelic_descr_get_status(struct gelic_descr *descr)
+{
+	return be32_to_cpu(descr->dmac_cmd_status) & GELIC_DESCR_DMA_STAT_MASK;
+}
+
+static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
+{
+	int status;
+	u64 v1, v2;
+
+	status = lv1_net_control(bus_id(card), dev_id(card),
+				 GELIC_LV1_SET_NEGOTIATION_MODE,
+				 GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2);
+	if (status) {
+		pr_info("%s: failed setting negotiation mode %d\n", __func__,
+			status);
+		return -EBUSY;
+	}
+
+	card->link_mode = mode;
+	return 0;
+}
+
+/**
+ * gelic_card_disable_txdmac - disables the transmit DMA controller
+ * @card: card structure
+ *
+ * gelic_card_disable_txdmac terminates processing on the DMA controller by
+ * turing off DMA and issuing a force end
+ */
+static void gelic_card_disable_txdmac(struct gelic_card *card)
+{
+	int status;
+
+	/* this hvc blocks until the DMA in progress really stopped */
+	status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
+	if (status)
+		dev_err(ctodev(card),
+			"lv1_net_stop_tx_dma failed, status=%d\n", status);
+}
+
+/**
+ * gelic_card_enable_rxdmac - enables the receive DMA controller
+ * @card: card structure
+ *
+ * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
+ * in the GDADMACCNTR register
+ */
+static void gelic_card_enable_rxdmac(struct gelic_card *card)
+{
+	int status;
+
+#ifdef DEBUG
+	if (gelic_descr_get_status(card->rx_chain.head) !=
+	    GELIC_DESCR_DMA_CARDOWNED) {
+		printk(KERN_ERR "%s: status=%x\n", __func__,
+		       be32_to_cpu(card->rx_chain.head->dmac_cmd_status));
+		printk(KERN_ERR "%s: nextphy=%x\n", __func__,
+		       be32_to_cpu(card->rx_chain.head->next_descr_addr));
+		printk(KERN_ERR "%s: head=%p\n", __func__,
+		       card->rx_chain.head);
+	}
+#endif
+	status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
+				card->rx_chain.head->bus_addr, 0);
+	if (status)
+		dev_info(ctodev(card),
+			 "lv1_net_start_rx_dma failed, status=%d\n", status);
+}
+
+/**
+ * gelic_card_disable_rxdmac - disables the receive DMA controller
+ * @card: card structure
+ *
+ * gelic_card_disable_rxdmac terminates processing on the DMA controller by
+ * turing off DMA and issuing a force end
+ */
+static void gelic_card_disable_rxdmac(struct gelic_card *card)
+{
+	int status;
+
+	/* this hvc blocks until the DMA in progress really stopped */
+	status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
+	if (status)
+		dev_err(ctodev(card),
+			"lv1_net_stop_rx_dma failed, %d\n", status);
+}
+
+/**
+ * gelic_descr_set_status -- sets the status of a descriptor
+ * @descr: descriptor to change
+ * @status: status to set in the descriptor
+ *
+ * changes the status to the specified value. Doesn't change other bits
+ * in the status
+ */
+static void gelic_descr_set_status(struct gelic_descr *descr,
+				   enum gelic_descr_dma_status status)
+{
+	descr->dmac_cmd_status = cpu_to_be32(status |
+			(be32_to_cpu(descr->dmac_cmd_status) &
+			 ~GELIC_DESCR_DMA_STAT_MASK));
+	/*
+	 * dma_cmd_status field is used to indicate whether the descriptor
+	 * is valid or not.
+	 * Usually caller of this function wants to inform that to the
+	 * hardware, so we assure here the hardware sees the change.
+	 */
+	wmb();
+}
+
+/**
+ * gelic_card_reset_chain - reset status of a descriptor chain
+ * @card: card structure
+ * @chain: address of chain
+ * @start_descr: address of descriptor array
+ *
+ * Reset the status of dma descriptors to ready state
+ * and re-initialize the hardware chain for later use
+ */
+static void gelic_card_reset_chain(struct gelic_card *card,
+				   struct gelic_descr_chain *chain,
+				   struct gelic_descr *start_descr)
+{
+	struct gelic_descr *descr;
+
+	for (descr = start_descr; start_descr != descr->next; descr++) {
+		gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
+		descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
+	}
+
+	chain->head = start_descr;
+	chain->tail = (descr - 1);
+
+	(descr - 1)->next_descr_addr = 0;
+}
+
+void gelic_card_up(struct gelic_card *card)
+{
+	pr_debug("%s: called\n", __func__);
+	mutex_lock(&card->updown_lock);
+	if (atomic_inc_return(&card->users) == 1) {
+		pr_debug("%s: real do\n", __func__);
+		/* enable irq */
+		gelic_card_set_irq_mask(card, card->irq_mask);
+		/* start rx */
+		gelic_card_enable_rxdmac(card);
+
+		napi_enable(&card->napi);
+	}
+	mutex_unlock(&card->updown_lock);
+	pr_debug("%s: done\n", __func__);
+}
+
+void gelic_card_down(struct gelic_card *card)
+{
+	u64 mask;
+	pr_debug("%s: called\n", __func__);
+	mutex_lock(&card->updown_lock);
+	if (atomic_dec_if_positive(&card->users) == 0) {
+		pr_debug("%s: real do\n", __func__);
+		napi_disable(&card->napi);
+		/*
+		 * Disable irq. Wireless interrupts will
+		 * be disabled later if any
+		 */
+		mask = card->irq_mask & (GELIC_CARD_WLAN_EVENT_RECEIVED |
+					 GELIC_CARD_WLAN_COMMAND_COMPLETED);
+		gelic_card_set_irq_mask(card, mask);
+		/* stop rx */
+		gelic_card_disable_rxdmac(card);
+		gelic_card_reset_chain(card, &card->rx_chain,
+				       card->descr + GELIC_NET_TX_DESCRIPTORS);
+		/* stop tx */
+		gelic_card_disable_txdmac(card);
+	}
+	mutex_unlock(&card->updown_lock);
+	pr_debug("%s: done\n", __func__);
+}
+
+/**
+ * gelic_card_free_chain - free descriptor chain
+ * @card: card structure
+ * @descr_in: address of desc
+ */
+static void gelic_card_free_chain(struct gelic_card *card,
+				  struct gelic_descr *descr_in)
+{
+	struct gelic_descr *descr;
+
+	for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) {
+		dma_unmap_single(ctodev(card), descr->bus_addr,
+				 GELIC_DESCR_SIZE, DMA_BIDIRECTIONAL);
+		descr->bus_addr = 0;
+	}
+}
+
+/**
+ * gelic_card_init_chain - links descriptor chain
+ * @card: card structure
+ * @chain: address of chain
+ * @start_descr: address of descriptor array
+ * @no: number of descriptors
+ *
+ * we manage a circular list that mirrors the hardware structure,
+ * except that the hardware uses bus addresses.
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_card_init_chain(struct gelic_card *card,
+				 struct gelic_descr_chain *chain,
+				 struct gelic_descr *start_descr, int no)
+{
+	int i;
+	struct gelic_descr *descr;
+
+	descr = start_descr;
+	memset(descr, 0, sizeof(*descr) * no);
+
+	/* set up the hardware pointers in each descriptor */
+	for (i = 0; i < no; i++, descr++) {
+		gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
+		descr->bus_addr =
+			dma_map_single(ctodev(card), descr,
+				       GELIC_DESCR_SIZE,
+				       DMA_BIDIRECTIONAL);
+
+		if (!descr->bus_addr)
+			goto iommu_error;
+
+		descr->next = descr + 1;
+		descr->prev = descr - 1;
+	}
+	/* make them as ring */
+	(descr - 1)->next = start_descr;
+	start_descr->prev = (descr - 1);
+
+	/* chain bus addr of hw descriptor */
+	descr = start_descr;
+	for (i = 0; i < no; i++, descr++) {
+		descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
+	}
+
+	chain->head = start_descr;
+	chain->tail = start_descr;
+
+	/* do not chain last hw descriptor */
+	(descr - 1)->next_descr_addr = 0;
+
+	return 0;
+
+iommu_error:
+	for (i--, descr--; 0 <= i; i--, descr--)
+		if (descr->bus_addr)
+			dma_unmap_single(ctodev(card), descr->bus_addr,
+					 GELIC_DESCR_SIZE,
+					 DMA_BIDIRECTIONAL);
+	return -ENOMEM;
+}
+
+/**
+ * gelic_descr_prepare_rx - reinitializes a rx descriptor
+ * @card: card structure
+ * @descr: descriptor to re-init
+ *
+ * return 0 on success, <0 on failure
+ *
+ * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
+ * Activate the descriptor state-wise
+ */
+static int gelic_descr_prepare_rx(struct gelic_card *card,
+				  struct gelic_descr *descr)
+{
+	int offset;
+	unsigned int bufsize;
+
+	if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE)
+		dev_info(ctodev(card), "%s: ERROR status\n", __func__);
+	/* we need to round up the buffer size to a multiple of 128 */
+	bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
+
+	/* and we need to have it 128 byte aligned, therefore we allocate a
+	 * bit more */
+	descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1);
+	if (!descr->skb) {
+		descr->buf_addr = 0; /* tell DMAC don't touch memory */
+		dev_info(ctodev(card),
+			 "%s:allocate skb failed !!\n", __func__);
+		return -ENOMEM;
+	}
+	descr->buf_size = cpu_to_be32(bufsize);
+	descr->dmac_cmd_status = 0;
+	descr->result_size = 0;
+	descr->valid_size = 0;
+	descr->data_error = 0;
+
+	offset = ((unsigned long)descr->skb->data) &
+		(GELIC_NET_RXBUF_ALIGN - 1);
+	if (offset)
+		skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
+	/* io-mmu-map the skb */
+	descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
+						     descr->skb->data,
+						     GELIC_NET_MAX_MTU,
+						     DMA_FROM_DEVICE));
+	if (!descr->buf_addr) {
+		dev_kfree_skb_any(descr->skb);
+		descr->skb = NULL;
+		dev_info(ctodev(card),
+			 "%s:Could not iommu-map rx buffer\n", __func__);
+		gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
+		return -ENOMEM;
+	} else {
+		gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
+		return 0;
+	}
+}
+
+/**
+ * gelic_card_release_rx_chain - free all skb of rx descr
+ * @card: card structure
+ *
+ */
+static void gelic_card_release_rx_chain(struct gelic_card *card)
+{
+	struct gelic_descr *descr = card->rx_chain.head;
+
+	do {
+		if (descr->skb) {
+			dma_unmap_single(ctodev(card),
+					 be32_to_cpu(descr->buf_addr),
+					 descr->skb->len,
+					 DMA_FROM_DEVICE);
+			descr->buf_addr = 0;
+			dev_kfree_skb_any(descr->skb);
+			descr->skb = NULL;
+			gelic_descr_set_status(descr,
+					       GELIC_DESCR_DMA_NOT_IN_USE);
+		}
+		descr = descr->next;
+	} while (descr != card->rx_chain.head);
+}
+
+/**
+ * gelic_card_fill_rx_chain - fills descriptors/skbs in the rx chains
+ * @card: card structure
+ *
+ * fills all descriptors in the rx chain: allocates skbs
+ * and iommu-maps them.
+ * returns 0 on success, < 0 on failure
+ */
+static int gelic_card_fill_rx_chain(struct gelic_card *card)
+{
+	struct gelic_descr *descr = card->rx_chain.head;
+	int ret;
+
+	do {
+		if (!descr->skb) {
+			ret = gelic_descr_prepare_rx(card, descr);
+			if (ret)
+				goto rewind;
+		}
+		descr = descr->next;
+	} while (descr != card->rx_chain.head);
+
+	return 0;
+rewind:
+	gelic_card_release_rx_chain(card);
+	return ret;
+}
+
+/**
+ * gelic_card_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
+ * @card: card structure
+ *
+ * returns 0 on success, < 0 on failure
+ */
+static int gelic_card_alloc_rx_skbs(struct gelic_card *card)
+{
+	struct gelic_descr_chain *chain;
+	int ret;
+	chain = &card->rx_chain;
+	ret = gelic_card_fill_rx_chain(card);
+	chain->tail = card->rx_top->prev; /* point to the last */
+	return ret;
+}
+
+/**
+ * gelic_descr_release_tx - processes a used tx descriptor
+ * @card: card structure
+ * @descr: descriptor to release
+ *
+ * releases a used tx descriptor (unmapping, freeing of skb)
+ */
+static void gelic_descr_release_tx(struct gelic_card *card,
+				       struct gelic_descr *descr)
+{
+	struct sk_buff *skb = descr->skb;
+
+	BUG_ON(!(be32_to_cpu(descr->data_status) & GELIC_DESCR_TX_TAIL));
+
+	dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), skb->len,
+			 DMA_TO_DEVICE);
+	dev_kfree_skb_any(skb);
+
+	descr->buf_addr = 0;
+	descr->buf_size = 0;
+	descr->next_descr_addr = 0;
+	descr->result_size = 0;
+	descr->valid_size = 0;
+	descr->data_status = 0;
+	descr->data_error = 0;
+	descr->skb = NULL;
+
+	/* set descr status */
+	gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
+}
+
+static void gelic_card_stop_queues(struct gelic_card *card)
+{
+	netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
+
+	if (card->netdev[GELIC_PORT_WIRELESS])
+		netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]);
+}
+static void gelic_card_wake_queues(struct gelic_card *card)
+{
+	netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
+
+	if (card->netdev[GELIC_PORT_WIRELESS])
+		netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]);
+}
+/**
+ * gelic_card_release_tx_chain - processes sent tx descriptors
+ * @card: adapter structure
+ * @stop: net_stop sequence
+ *
+ * releases the tx descriptors that gelic has finished with
+ */
+static void gelic_card_release_tx_chain(struct gelic_card *card, int stop)
+{
+	struct gelic_descr_chain *tx_chain;
+	enum gelic_descr_dma_status status;
+	struct net_device *netdev;
+	int release = 0;
+
+	for (tx_chain = &card->tx_chain;
+	     tx_chain->head != tx_chain->tail && tx_chain->tail;
+	     tx_chain->tail = tx_chain->tail->next) {
+		status = gelic_descr_get_status(tx_chain->tail);
+		netdev = tx_chain->tail->skb->dev;
+		switch (status) {
+		case GELIC_DESCR_DMA_RESPONSE_ERROR:
+		case GELIC_DESCR_DMA_PROTECTION_ERROR:
+		case GELIC_DESCR_DMA_FORCE_END:
+			if (printk_ratelimit())
+				dev_info(ctodev(card),
+					 "%s: forcing end of tx descriptor " \
+					 "with status %x\n",
+					 __func__, status);
+			netdev->stats.tx_dropped++;
+			break;
+
+		case GELIC_DESCR_DMA_COMPLETE:
+			if (tx_chain->tail->skb) {
+				netdev->stats.tx_packets++;
+				netdev->stats.tx_bytes +=
+					tx_chain->tail->skb->len;
+			}
+			break;
+
+		case GELIC_DESCR_DMA_CARDOWNED:
+			/* pending tx request */
+		default:
+			/* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */
+			if (!stop)
+				goto out;
+		}
+		gelic_descr_release_tx(card, tx_chain->tail);
+		release ++;
+	}
+out:
+	if (!stop && release)
+		gelic_card_wake_queues(card);
+}
+
+/**
+ * gelic_net_set_multi - sets multicast addresses and promisc flags
+ * @netdev: interface device structure
+ *
+ * gelic_net_set_multi configures multicast addresses as needed for the
+ * netdev interface. It also sets up multicast, allmulti and promisc
+ * flags appropriately
+ */
+void gelic_net_set_multi(struct net_device *netdev)
+{
+	struct gelic_card *card = netdev_card(netdev);
+	struct netdev_hw_addr *ha;
+	unsigned int i;
+	uint8_t *p;
+	u64 addr;
+	int status;
+
+	/* clear all multicast address */
+	status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
+						  0, 1);
+	if (status)
+		dev_err(ctodev(card),
+			"lv1_net_remove_multicast_address failed %d\n",
+			status);
+	/* set broadcast address */
+	status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
+					       GELIC_NET_BROADCAST_ADDR, 0);
+	if (status)
+		dev_err(ctodev(card),
+			"lv1_net_add_multicast_address failed, %d\n",
+			status);
+
+	if ((netdev->flags & IFF_ALLMULTI) ||
+	    (netdev_mc_count(netdev) > GELIC_NET_MC_COUNT_MAX)) {
+		status = lv1_net_add_multicast_address(bus_id(card),
+						       dev_id(card),
+						       0, 1);
+		if (status)
+			dev_err(ctodev(card),
+				"lv1_net_add_multicast_address failed, %d\n",
+				status);
+		return;
+	}
+
+	/* set multicast addresses */
+	netdev_for_each_mc_addr(ha, netdev) {
+		addr = 0;
+		p = ha->addr;
+		for (i = 0; i < ETH_ALEN; i++) {
+			addr <<= 8;
+			addr |= *p++;
+		}
+		status = lv1_net_add_multicast_address(bus_id(card),
+						       dev_id(card),
+						       addr, 0);
+		if (status)
+			dev_err(ctodev(card),
+				"lv1_net_add_multicast_address failed, %d\n",
+				status);
+	}
+}
+
+/**
+ * gelic_net_stop - called upon ifconfig down
+ * @netdev: interface device structure
+ *
+ * always returns 0
+ */
+int gelic_net_stop(struct net_device *netdev)
+{
+	struct gelic_card *card;
+
+	pr_debug("%s: start\n", __func__);
+
+	netif_stop_queue(netdev);
+	netif_carrier_off(netdev);
+
+	card = netdev_card(netdev);
+	gelic_card_down(card);
+
+	pr_debug("%s: done\n", __func__);
+	return 0;
+}
+
+/**
+ * gelic_card_get_next_tx_descr - returns the next available tx descriptor
+ * @card: device structure to get descriptor from
+ *
+ * returns the address of the next descriptor, or NULL if not available.
+ */
+static struct gelic_descr *
+gelic_card_get_next_tx_descr(struct gelic_card *card)
+{
+	if (!card->tx_chain.head)
+		return NULL;
+	/*  see if the next descriptor is free */
+	if (card->tx_chain.tail != card->tx_chain.head->next &&
+	    gelic_descr_get_status(card->tx_chain.head) ==
+	    GELIC_DESCR_DMA_NOT_IN_USE)
+		return card->tx_chain.head;
+	else
+		return NULL;
+
+}
+
+/**
+ * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field
+ * @descr: descriptor structure to fill out
+ * @skb: packet to consider
+ *
+ * fills out the command and status field of the descriptor structure,
+ * depending on hardware checksum settings. This function assumes a wmb()
+ * has executed before.
+ */
+static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr,
+				       struct sk_buff *skb)
+{
+	if (skb->ip_summed != CHECKSUM_PARTIAL)
+		descr->dmac_cmd_status =
+			cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
+				    GELIC_DESCR_TX_DMA_FRAME_TAIL);
+	else {
+		/* is packet ip?
+		 * if yes: tcp? udp? */
+		if (skb->protocol == htons(ETH_P_IP)) {
+			if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+				descr->dmac_cmd_status =
+				cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM |
+					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
+
+			else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
+				descr->dmac_cmd_status =
+				cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM |
+					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
+			else	/*
+				 * the stack should checksum non-tcp and non-udp
+				 * packets on his own: NETIF_F_IP_CSUM
+				 */
+				descr->dmac_cmd_status =
+				cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
+					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
+		}
+	}
+}
+
+static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
+						 unsigned short tag)
+{
+	struct vlan_ethhdr *veth;
+	static unsigned int c;
+
+	if (skb_headroom(skb) < VLAN_HLEN) {
+		struct sk_buff *sk_tmp = skb;
+		pr_debug("%s: hd=%d c=%ud\n", __func__, skb_headroom(skb), c);
+		skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN);
+		if (!skb)
+			return NULL;
+		dev_kfree_skb_any(sk_tmp);
+	}
+	veth = skb_push(skb, VLAN_HLEN);
+
+	/* Move the mac addresses to the top of buffer */
+	memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN);
+
+	veth->h_vlan_proto = cpu_to_be16(ETH_P_8021Q);
+	veth->h_vlan_TCI = htons(tag);
+
+	return skb;
+}
+
+/**
+ * gelic_descr_prepare_tx - setup a descriptor for sending packets
+ * @card: card structure
+ * @descr: descriptor structure
+ * @skb: packet to use
+ *
+ * returns 0 on success, <0 on failure.
+ *
+ */
+static int gelic_descr_prepare_tx(struct gelic_card *card,
+				  struct gelic_descr *descr,
+				  struct sk_buff *skb)
+{
+	dma_addr_t buf;
+
+	if (card->vlan_required) {
+		struct sk_buff *skb_tmp;
+		enum gelic_port_type type;
+
+		type = netdev_port(skb->dev)->type;
+		skb_tmp = gelic_put_vlan_tag(skb,
+					     card->vlan[type].tx);
+		if (!skb_tmp)
+			return -ENOMEM;
+		skb = skb_tmp;
+	}
+
+	buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE);
+
+	if (!buf) {
+		dev_err(ctodev(card),
+			"dma map 2 failed (%p, %i). Dropping packet\n",
+			skb->data, skb->len);
+		return -ENOMEM;
+	}
+
+	descr->buf_addr = cpu_to_be32(buf);
+	descr->buf_size = cpu_to_be32(skb->len);
+	descr->skb = skb;
+	descr->data_status = 0;
+	descr->next_descr_addr = 0; /* terminate hw descr */
+	gelic_descr_set_tx_cmdstat(descr, skb);
+
+	/* bump free descriptor pointer */
+	card->tx_chain.head = descr->next;
+	return 0;
+}
+
+/**
+ * gelic_card_kick_txdma - enables TX DMA processing
+ * @card: card structure
+ * @descr: descriptor address to enable TX processing at
+ *
+ */
+static int gelic_card_kick_txdma(struct gelic_card *card,
+				 struct gelic_descr *descr)
+{
+	int status = 0;
+
+	if (card->tx_dma_progress)
+		return 0;
+
+	if (gelic_descr_get_status(descr) == GELIC_DESCR_DMA_CARDOWNED) {
+		card->tx_dma_progress = 1;
+		status = lv1_net_start_tx_dma(bus_id(card), dev_id(card),
+					      descr->bus_addr, 0);
+		if (status) {
+			card->tx_dma_progress = 0;
+			dev_info(ctodev(card), "lv1_net_start_txdma failed," \
+				 "status=%d\n", status);
+		}
+	}
+	return status;
+}
+
+/**
+ * gelic_net_xmit - transmits a frame over the device
+ * @skb: packet to send out
+ * @netdev: interface device structure
+ *
+ * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
+ */
+netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct gelic_card *card = netdev_card(netdev);
+	struct gelic_descr *descr;
+	int result;
+	unsigned long flags;
+
+	spin_lock_irqsave(&card->tx_lock, flags);
+
+	gelic_card_release_tx_chain(card, 0);
+
+	descr = gelic_card_get_next_tx_descr(card);
+	if (!descr) {
+		/*
+		 * no more descriptors free
+		 */
+		gelic_card_stop_queues(card);
+		spin_unlock_irqrestore(&card->tx_lock, flags);
+		return NETDEV_TX_BUSY;
+	}
+
+	result = gelic_descr_prepare_tx(card, descr, skb);
+	if (result) {
+		/*
+		 * DMA map failed.  As chances are that failure
+		 * would continue, just release skb and return
+		 */
+		netdev->stats.tx_dropped++;
+		dev_kfree_skb_any(skb);
+		spin_unlock_irqrestore(&card->tx_lock, flags);
+		return NETDEV_TX_OK;
+	}
+	/*
+	 * link this prepared descriptor to previous one
+	 * to achieve high performance
+	 */
+	descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
+	/*
+	 * as hardware descriptor is modified in the above lines,
+	 * ensure that the hardware sees it
+	 */
+	wmb();
+	if (gelic_card_kick_txdma(card, descr)) {
+		/*
+		 * kick failed.
+		 * release descriptor which was just prepared
+		 */
+		netdev->stats.tx_dropped++;
+		/* don't trigger BUG_ON() in gelic_descr_release_tx */
+		descr->data_status = cpu_to_be32(GELIC_DESCR_TX_TAIL);
+		gelic_descr_release_tx(card, descr);
+		/* reset head */
+		card->tx_chain.head = descr;
+		/* reset hw termination */
+		descr->prev->next_descr_addr = 0;
+		dev_info(ctodev(card), "%s: kick failure\n", __func__);
+	}
+
+	spin_unlock_irqrestore(&card->tx_lock, flags);
+	return NETDEV_TX_OK;
+}
+
+/**
+ * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
+ * @descr: descriptor to process
+ * @card: card structure
+ * @netdev: net_device structure to be passed packet
+ *
+ * iommu-unmaps the skb, fills out skb structure and passes the data to the
+ * stack. The descriptor state is not changed.
+ */
+static void gelic_net_pass_skb_up(struct gelic_descr *descr,
+				  struct gelic_card *card,
+				  struct net_device *netdev)
+
+{
+	struct sk_buff *skb = descr->skb;
+	u32 data_status, data_error;
+
+	data_status = be32_to_cpu(descr->data_status);
+	data_error = be32_to_cpu(descr->data_error);
+	/* unmap skb buffer */
+	dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr),
+			 GELIC_NET_MAX_MTU,
+			 DMA_FROM_DEVICE);
+
+	skb_put(skb, be32_to_cpu(descr->valid_size)?
+		be32_to_cpu(descr->valid_size) :
+		be32_to_cpu(descr->result_size));
+	if (!descr->valid_size)
+		dev_info(ctodev(card), "buffer full %x %x %x\n",
+			 be32_to_cpu(descr->result_size),
+			 be32_to_cpu(descr->buf_size),
+			 be32_to_cpu(descr->dmac_cmd_status));
+
+	descr->skb = NULL;
+	/*
+	 * the card put 2 bytes vlan tag in front
+	 * of the ethernet frame
+	 */
+	skb_pull(skb, 2);
+	skb->protocol = eth_type_trans(skb, netdev);
+
+	/* checksum offload */
+	if (netdev->features & NETIF_F_RXCSUM) {
+		if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) &&
+		    (!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK)))
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+		else
+			skb_checksum_none_assert(skb);
+	} else
+		skb_checksum_none_assert(skb);
+
+	/* update netdevice statistics */
+	netdev->stats.rx_packets++;
+	netdev->stats.rx_bytes += skb->len;
+
+	/* pass skb up to stack */
+	netif_receive_skb(skb);
+}
+
+/**
+ * gelic_card_decode_one_descr - processes an rx descriptor
+ * @card: card structure
+ *
+ * returns 1 if a packet has been sent to the stack, otherwise 0
+ *
+ * processes an rx descriptor by iommu-unmapping the data buffer and passing
+ * the packet up to the stack
+ */
+static int gelic_card_decode_one_descr(struct gelic_card *card)
+{
+	enum gelic_descr_dma_status status;
+	struct gelic_descr_chain *chain = &card->rx_chain;
+	struct gelic_descr *descr = chain->head;
+	struct net_device *netdev = NULL;
+	int dmac_chain_ended;
+
+	status = gelic_descr_get_status(descr);
+
+	if (status == GELIC_DESCR_DMA_CARDOWNED)
+		return 0;
+
+	if (status == GELIC_DESCR_DMA_NOT_IN_USE) {
+		dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
+		return 0;
+	}
+
+	/* netdevice select */
+	if (card->vlan_required) {
+		unsigned int i;
+		u16 vid;
+		vid = *(u16 *)(descr->skb->data) & VLAN_VID_MASK;
+		for (i = 0; i < GELIC_PORT_MAX; i++) {
+			if (card->vlan[i].rx == vid) {
+				netdev = card->netdev[i];
+				break;
+			}
+		}
+		if (GELIC_PORT_MAX <= i) {
+			pr_info("%s: unknown packet vid=%x\n", __func__, vid);
+			goto refill;
+		}
+	} else
+		netdev = card->netdev[GELIC_PORT_ETHERNET_0];
+
+	if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) ||
+	    (status == GELIC_DESCR_DMA_PROTECTION_ERROR) ||
+	    (status == GELIC_DESCR_DMA_FORCE_END)) {
+		dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
+			 status);
+		netdev->stats.rx_dropped++;
+		goto refill;
+	}
+
+	if (status == GELIC_DESCR_DMA_BUFFER_FULL) {
+		/*
+		 * Buffer full would occur if and only if
+		 * the frame length was longer than the size of this
+		 * descriptor's buffer.  If the frame length was equal
+		 * to or shorter than buffer'size, FRAME_END condition
+		 * would occur.
+		 * Anyway this frame was longer than the MTU,
+		 * just drop it.
+		 */
+		dev_info(ctodev(card), "overlength frame\n");
+		goto refill;
+	}
+	/*
+	 * descriptors any other than FRAME_END here should
+	 * be treated as error.
+	 */
+	if (status != GELIC_DESCR_DMA_FRAME_END) {
+		dev_dbg(ctodev(card), "RX descriptor with state %x\n",
+			status);
+		goto refill;
+	}
+
+	/* ok, we've got a packet in descr */
+	gelic_net_pass_skb_up(descr, card, netdev);
+refill:
+
+	/* is the current descriptor terminated with next_descr == NULL? */
+	dmac_chain_ended =
+		be32_to_cpu(descr->dmac_cmd_status) &
+		GELIC_DESCR_RX_DMA_CHAIN_END;
+	/*
+	 * So that always DMAC can see the end
+	 * of the descriptor chain to avoid
+	 * from unwanted DMAC overrun.
+	 */
+	descr->next_descr_addr = 0;
+
+	/* change the descriptor state: */
+	gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
+
+	/*
+	 * this call can fail, but for now, just leave this
+	 * descriptor without skb
+	 */
+	gelic_descr_prepare_rx(card, descr);
+
+	chain->tail = descr;
+	chain->head = descr->next;
+
+	/*
+	 * Set this descriptor the end of the chain.
+	 */
+	descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
+
+	/*
+	 * If dmac chain was met, DMAC stopped.
+	 * thus re-enable it
+	 */
+
+	if (dmac_chain_ended)
+		gelic_card_enable_rxdmac(card);
+
+	return 1;
+}
+
+/**
+ * gelic_net_poll - NAPI poll function called by the stack to return packets
+ * @napi: napi structure
+ * @budget: number of packets we can pass to the stack at most
+ *
+ * returns the number of the processed packets
+ *
+ */
+static int gelic_net_poll(struct napi_struct *napi, int budget)
+{
+	struct gelic_card *card = container_of(napi, struct gelic_card, napi);
+	int packets_done = 0;
+
+	while (packets_done < budget) {
+		if (!gelic_card_decode_one_descr(card))
+			break;
+
+		packets_done++;
+	}
+
+	if (packets_done < budget) {
+		napi_complete_done(napi, packets_done);
+		gelic_card_rx_irq_on(card);
+	}
+	return packets_done;
+}
+
+/**
+ * gelic_card_interrupt - event handler for gelic_net
+ */
+static irqreturn_t gelic_card_interrupt(int irq, void *ptr)
+{
+	unsigned long flags;
+	struct gelic_card *card = ptr;
+	u64 status;
+
+	status = card->irq_status;
+
+	if (!status)
+		return IRQ_NONE;
+
+	status &= card->irq_mask;
+
+	if (status & GELIC_CARD_RXINT) {
+		gelic_card_rx_irq_off(card);
+		napi_schedule(&card->napi);
+	}
+
+	if (status & GELIC_CARD_TXINT) {
+		spin_lock_irqsave(&card->tx_lock, flags);
+		card->tx_dma_progress = 0;
+		gelic_card_release_tx_chain(card, 0);
+		/* kick outstanding tx descriptor if any */
+		gelic_card_kick_txdma(card, card->tx_chain.tail);
+		spin_unlock_irqrestore(&card->tx_lock, flags);
+	}
+
+	/* ether port status changed */
+	if (status & GELIC_CARD_PORT_STATUS_CHANGED)
+		gelic_card_get_ether_port_status(card, 1);
+
+#ifdef CONFIG_GELIC_WIRELESS
+	if (status & (GELIC_CARD_WLAN_EVENT_RECEIVED |
+		      GELIC_CARD_WLAN_COMMAND_COMPLETED))
+		gelic_wl_interrupt(card->netdev[GELIC_PORT_WIRELESS], status);
+#endif
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * gelic_net_poll_controller - artificial interrupt for netconsole etc.
+ * @netdev: interface device structure
+ *
+ * see Documentation/networking/netconsole.txt
+ */
+void gelic_net_poll_controller(struct net_device *netdev)
+{
+	struct gelic_card *card = netdev_card(netdev);
+
+	gelic_card_set_irq_mask(card, 0);
+	gelic_card_interrupt(netdev->irq, netdev);
+	gelic_card_set_irq_mask(card, card->irq_mask);
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+/**
+ * gelic_net_open - called upon ifconfig up
+ * @netdev: interface device structure
+ *
+ * returns 0 on success, <0 on failure
+ *
+ * gelic_net_open allocates all the descriptors and memory needed for
+ * operation, sets up multicast list and enables interrupts
+ */
+int gelic_net_open(struct net_device *netdev)
+{
+	struct gelic_card *card = netdev_card(netdev);
+
+	dev_dbg(ctodev(card), " -> %s %p\n", __func__, netdev);
+
+	gelic_card_up(card);
+
+	netif_start_queue(netdev);
+	gelic_card_get_ether_port_status(card, 1);
+
+	dev_dbg(ctodev(card), " <- %s\n", __func__);
+	return 0;
+}
+
+void gelic_net_get_drvinfo(struct net_device *netdev,
+			   struct ethtool_drvinfo *info)
+{
+	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+}
+
+static int gelic_ether_get_link_ksettings(struct net_device *netdev,
+					  struct ethtool_link_ksettings *cmd)
+{
+	struct gelic_card *card = netdev_card(netdev);
+	u32 supported, advertising;
+
+	gelic_card_get_ether_port_status(card, 0);
+
+	if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX)
+		cmd->base.duplex = DUPLEX_FULL;
+	else
+		cmd->base.duplex = DUPLEX_HALF;
+
+	switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
+	case GELIC_LV1_ETHER_SPEED_10:
+		cmd->base.speed = SPEED_10;
+		break;
+	case GELIC_LV1_ETHER_SPEED_100:
+		cmd->base.speed = SPEED_100;
+		break;
+	case GELIC_LV1_ETHER_SPEED_1000:
+		cmd->base.speed = SPEED_1000;
+		break;
+	default:
+		pr_info("%s: speed unknown\n", __func__);
+		cmd->base.speed = SPEED_10;
+		break;
+	}
+
+	supported = SUPPORTED_TP | SUPPORTED_Autoneg |
+			SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+			SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+			SUPPORTED_1000baseT_Full;
+	advertising = supported;
+	if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) {
+		cmd->base.autoneg = AUTONEG_ENABLE;
+	} else {
+		cmd->base.autoneg = AUTONEG_DISABLE;
+		advertising &= ~ADVERTISED_Autoneg;
+	}
+	cmd->base.port = PORT_TP;
+
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+						supported);
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+						advertising);
+
+	return 0;
+}
+
+static int
+gelic_ether_set_link_ksettings(struct net_device *netdev,
+			       const struct ethtool_link_ksettings *cmd)
+{
+	struct gelic_card *card = netdev_card(netdev);
+	u64 mode;
+	int ret;
+
+	if (cmd->base.autoneg == AUTONEG_ENABLE) {
+		mode = GELIC_LV1_ETHER_AUTO_NEG;
+	} else {
+		switch (cmd->base.speed) {
+		case SPEED_10:
+			mode = GELIC_LV1_ETHER_SPEED_10;
+			break;
+		case SPEED_100:
+			mode = GELIC_LV1_ETHER_SPEED_100;
+			break;
+		case SPEED_1000:
+			mode = GELIC_LV1_ETHER_SPEED_1000;
+			break;
+		default:
+			return -EINVAL;
+		}
+		if (cmd->base.duplex == DUPLEX_FULL) {
+			mode |= GELIC_LV1_ETHER_FULL_DUPLEX;
+		} else if (cmd->base.speed == SPEED_1000) {
+			pr_info("1000 half duplex is not supported.\n");
+			return -EINVAL;
+		}
+	}
+
+	ret = gelic_card_set_link_mode(card, mode);
+
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void gelic_net_get_wol(struct net_device *netdev,
+			      struct ethtool_wolinfo *wol)
+{
+	if (0 <= ps3_compare_firmware_version(2, 2, 0))
+		wol->supported = WAKE_MAGIC;
+	else
+		wol->supported = 0;
+
+	wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
+	memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+static int gelic_net_set_wol(struct net_device *netdev,
+			     struct ethtool_wolinfo *wol)
+{
+	int status;
+	struct gelic_card *card;
+	u64 v1, v2;
+
+	if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
+	    !capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (wol->wolopts & ~WAKE_MAGIC)
+		return -EINVAL;
+
+	card = netdev_card(netdev);
+	if (wol->wolopts & WAKE_MAGIC) {
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					 GELIC_LV1_SET_WOL,
+					 GELIC_LV1_WOL_MAGIC_PACKET,
+					 0, GELIC_LV1_WOL_MP_ENABLE,
+					 &v1, &v2);
+		if (status) {
+			pr_info("%s: enabling WOL failed %d\n", __func__,
+				status);
+			status = -EIO;
+			goto done;
+		}
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					 GELIC_LV1_SET_WOL,
+					 GELIC_LV1_WOL_ADD_MATCH_ADDR,
+					 0, GELIC_LV1_WOL_MATCH_ALL,
+					 &v1, &v2);
+		if (!status)
+			ps3_sys_manager_set_wol(1);
+		else {
+			pr_info("%s: enabling WOL filter failed %d\n",
+				__func__, status);
+			status = -EIO;
+		}
+	} else {
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					 GELIC_LV1_SET_WOL,
+					 GELIC_LV1_WOL_MAGIC_PACKET,
+					 0, GELIC_LV1_WOL_MP_DISABLE,
+					 &v1, &v2);
+		if (status) {
+			pr_info("%s: disabling WOL failed %d\n", __func__,
+				status);
+			status = -EIO;
+			goto done;
+		}
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					 GELIC_LV1_SET_WOL,
+					 GELIC_LV1_WOL_DELETE_MATCH_ADDR,
+					 0, GELIC_LV1_WOL_MATCH_ALL,
+					 &v1, &v2);
+		if (!status)
+			ps3_sys_manager_set_wol(0);
+		else {
+			pr_info("%s: removing WOL filter failed %d\n",
+				__func__, status);
+			status = -EIO;
+		}
+	}
+done:
+	return status;
+}
+
+static const struct ethtool_ops gelic_ether_ethtool_ops = {
+	.get_drvinfo	= gelic_net_get_drvinfo,
+	.get_link	= ethtool_op_get_link,
+	.get_wol	= gelic_net_get_wol,
+	.set_wol	= gelic_net_set_wol,
+	.get_link_ksettings = gelic_ether_get_link_ksettings,
+	.set_link_ksettings = gelic_ether_set_link_ksettings,
+};
+
+/**
+ * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
+ * function (to be called not under interrupt status)
+ * @work: work is context of tx timout task
+ *
+ * called as task when tx hangs, resets interface (if interface is up)
+ */
+static void gelic_net_tx_timeout_task(struct work_struct *work)
+{
+	struct gelic_card *card =
+		container_of(work, struct gelic_card, tx_timeout_task);
+	struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0];
+
+	dev_info(ctodev(card), "%s:Timed out. Restarting...\n", __func__);
+
+	if (!(netdev->flags & IFF_UP))
+		goto out;
+
+	netif_device_detach(netdev);
+	gelic_net_stop(netdev);
+
+	gelic_net_open(netdev);
+	netif_device_attach(netdev);
+
+out:
+	atomic_dec(&card->tx_timeout_task_counter);
+}
+
+/**
+ * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
+ * @netdev: interface device structure
+ *
+ * called, if tx hangs. Schedules a task that resets the interface
+ */
+void gelic_net_tx_timeout(struct net_device *netdev)
+{
+	struct gelic_card *card;
+
+	card = netdev_card(netdev);
+	atomic_inc(&card->tx_timeout_task_counter);
+	if (netdev->flags & IFF_UP)
+		schedule_work(&card->tx_timeout_task);
+	else
+		atomic_dec(&card->tx_timeout_task_counter);
+}
+
+static const struct net_device_ops gelic_netdevice_ops = {
+	.ndo_open = gelic_net_open,
+	.ndo_stop = gelic_net_stop,
+	.ndo_start_xmit = gelic_net_xmit,
+	.ndo_set_rx_mode = gelic_net_set_multi,
+	.ndo_tx_timeout = gelic_net_tx_timeout,
+	.ndo_set_mac_address = eth_mac_addr,
+	.ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = gelic_net_poll_controller,
+#endif
+};
+
+/**
+ * gelic_ether_setup_netdev_ops - initialization of net_device operations
+ * @netdev: net_device structure
+ *
+ * fills out function pointers in the net_device structure
+ */
+static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
+					 struct napi_struct *napi)
+{
+	netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
+	/* NAPI */
+	netif_napi_add(netdev, napi, gelic_net_poll, NAPI_POLL_WEIGHT);
+	netdev->ethtool_ops = &gelic_ether_ethtool_ops;
+	netdev->netdev_ops = &gelic_netdevice_ops;
+}
+
+/**
+ * gelic_ether_setup_netdev - initialization of net_device
+ * @netdev: net_device structure
+ * @card: card structure
+ *
+ * Returns 0 on success or <0 on failure
+ *
+ * gelic_ether_setup_netdev initializes the net_device structure
+ * and register it.
+ **/
+int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
+{
+	int status;
+	u64 v1, v2;
+
+	netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
+
+	netdev->features = NETIF_F_IP_CSUM;
+	if (GELIC_CARD_RX_CSUM_DEFAULT)
+		netdev->features |= NETIF_F_RXCSUM;
+
+	status = lv1_net_control(bus_id(card), dev_id(card),
+				 GELIC_LV1_GET_MAC_ADDRESS,
+				 0, 0, 0, &v1, &v2);
+	v1 <<= 16;
+	if (status || !is_valid_ether_addr((u8 *)&v1)) {
+		dev_info(ctodev(card),
+			 "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
+			 __func__, status);
+		return -EINVAL;
+	}
+	memcpy(netdev->dev_addr, &v1, ETH_ALEN);
+
+	if (card->vlan_required) {
+		netdev->hard_header_len += VLAN_HLEN;
+		/*
+		 * As vlan is internally used,
+		 * we can not receive vlan packets
+		 */
+		netdev->features |= NETIF_F_VLAN_CHALLENGED;
+	}
+
+	/* MTU range: 64 - 1518 */
+	netdev->min_mtu = GELIC_NET_MIN_MTU;
+	netdev->max_mtu = GELIC_NET_MAX_MTU;
+
+	status = register_netdev(netdev);
+	if (status) {
+		dev_err(ctodev(card), "%s:Couldn't register %s %d\n",
+			__func__, netdev->name, status);
+		return status;
+	}
+	dev_info(ctodev(card), "%s: MAC addr %pM\n",
+		 netdev->name, netdev->dev_addr);
+
+	return 0;
+}
+
+/**
+ * gelic_alloc_card_net - allocates net_device and card structure
+ *
+ * returns the card structure or NULL in case of errors
+ *
+ * the card and net_device structures are linked to each other
+ */
+#define GELIC_ALIGN (32)
+static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
+{
+	struct gelic_card *card;
+	struct gelic_port *port;
+	void *p;
+	size_t alloc_size;
+	/*
+	 * gelic requires dma descriptor is 32 bytes aligned and
+	 * the hypervisor requires irq_status is 8 bytes aligned.
+	 */
+	BUILD_BUG_ON(offsetof(struct gelic_card, irq_status) % 8);
+	BUILD_BUG_ON(offsetof(struct gelic_card, descr) % 32);
+	alloc_size =
+		sizeof(struct gelic_card) +
+		sizeof(struct gelic_descr) * GELIC_NET_RX_DESCRIPTORS +
+		sizeof(struct gelic_descr) * GELIC_NET_TX_DESCRIPTORS +
+		GELIC_ALIGN - 1;
+
+	p  = kzalloc(alloc_size, GFP_KERNEL);
+	if (!p)
+		return NULL;
+	card = PTR_ALIGN(p, GELIC_ALIGN);
+	card->unalign = p;
+
+	/*
+	 * alloc netdev
+	 */
+	*netdev = alloc_etherdev(sizeof(struct gelic_port));
+	if (!*netdev) {
+		kfree(card->unalign);
+		return NULL;
+	}
+	port = netdev_priv(*netdev);
+
+	/* gelic_port */
+	port->netdev = *netdev;
+	port->card = card;
+	port->type = GELIC_PORT_ETHERNET_0;
+
+	/* gelic_card */
+	card->netdev[GELIC_PORT_ETHERNET_0] = *netdev;
+
+	INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
+	init_waitqueue_head(&card->waitq);
+	atomic_set(&card->tx_timeout_task_counter, 0);
+	mutex_init(&card->updown_lock);
+	atomic_set(&card->users, 0);
+
+	return card;
+}
+
+static void gelic_card_get_vlan_info(struct gelic_card *card)
+{
+	u64 v1, v2;
+	int status;
+	unsigned int i;
+	struct {
+		int tx;
+		int rx;
+	} vlan_id_ix[2] = {
+		[GELIC_PORT_ETHERNET_0] = {
+			.tx = GELIC_LV1_VLAN_TX_ETHERNET_0,
+			.rx = GELIC_LV1_VLAN_RX_ETHERNET_0
+		},
+		[GELIC_PORT_WIRELESS] = {
+			.tx = GELIC_LV1_VLAN_TX_WIRELESS,
+			.rx = GELIC_LV1_VLAN_RX_WIRELESS
+		}
+	};
+
+	for (i = 0; i < ARRAY_SIZE(vlan_id_ix); i++) {
+		/* tx tag */
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					 GELIC_LV1_GET_VLAN_ID,
+					 vlan_id_ix[i].tx,
+					 0, 0, &v1, &v2);
+		if (status || !v1) {
+			if (status != LV1_NO_ENTRY)
+				dev_dbg(ctodev(card),
+					"get vlan id for tx(%d) failed(%d)\n",
+					vlan_id_ix[i].tx, status);
+			card->vlan[i].tx = 0;
+			card->vlan[i].rx = 0;
+			continue;
+		}
+		card->vlan[i].tx = (u16)v1;
+
+		/* rx tag */
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					 GELIC_LV1_GET_VLAN_ID,
+					 vlan_id_ix[i].rx,
+					 0, 0, &v1, &v2);
+		if (status || !v1) {
+			if (status != LV1_NO_ENTRY)
+				dev_info(ctodev(card),
+					 "get vlan id for rx(%d) failed(%d)\n",
+					 vlan_id_ix[i].rx, status);
+			card->vlan[i].tx = 0;
+			card->vlan[i].rx = 0;
+			continue;
+		}
+		card->vlan[i].rx = (u16)v1;
+
+		dev_dbg(ctodev(card), "vlan_id[%d] tx=%02x rx=%02x\n",
+			i, card->vlan[i].tx, card->vlan[i].rx);
+	}
+
+	if (card->vlan[GELIC_PORT_ETHERNET_0].tx) {
+		BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx);
+		card->vlan_required = 1;
+	} else
+		card->vlan_required = 0;
+
+	/* check wirelss capable firmware */
+	if (ps3_compare_firmware_version(1, 6, 0) < 0) {
+		card->vlan[GELIC_PORT_WIRELESS].tx = 0;
+		card->vlan[GELIC_PORT_WIRELESS].rx = 0;
+	}
+
+	dev_info(ctodev(card), "internal vlan %s\n",
+		 card->vlan_required? "enabled" : "disabled");
+}
+/**
+ * ps3_gelic_driver_probe - add a device to the control of this driver
+ */
+static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
+{
+	struct gelic_card *card;
+	struct net_device *netdev;
+	int result;
+
+	pr_debug("%s: called\n", __func__);
+
+	udbg_shutdown_ps3gelic();
+
+	result = ps3_open_hv_device(dev);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:ps3_open_hv_device failed\n",
+			__func__);
+		goto fail_open;
+	}
+
+	result = ps3_dma_region_create(dev->d_region);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:ps3_dma_region_create failed(%d)\n",
+			__func__, result);
+		BUG_ON("check region type");
+		goto fail_dma_region;
+	}
+
+	/* alloc card/netdevice */
+	card = gelic_alloc_card_net(&netdev);
+	if (!card) {
+		dev_info(&dev->core, "%s:gelic_net_alloc_card failed\n",
+			 __func__);
+		result = -ENOMEM;
+		goto fail_alloc_card;
+	}
+	ps3_system_bus_set_drvdata(dev, card);
+	card->dev = dev;
+
+	/* get internal vlan info */
+	gelic_card_get_vlan_info(card);
+
+	card->link_mode = GELIC_LV1_ETHER_AUTO_NEG;
+
+	/* setup interrupt */
+	result = lv1_net_set_interrupt_status_indicator(bus_id(card),
+							dev_id(card),
+		ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
+		0);
+
+	if (result) {
+		dev_dbg(&dev->core,
+			"%s:set_interrupt_status_indicator failed: %s\n",
+			__func__, ps3_result(result));
+		result = -EIO;
+		goto fail_status_indicator;
+	}
+
+	result = ps3_sb_event_receive_port_setup(dev, PS3_BINDING_CPU_ANY,
+		&card->irq);
+
+	if (result) {
+		dev_info(ctodev(card),
+			 "%s:gelic_net_open_device failed (%d)\n",
+			 __func__, result);
+		result = -EPERM;
+		goto fail_alloc_irq;
+	}
+	result = request_irq(card->irq, gelic_card_interrupt,
+			     0, netdev->name, card);
+
+	if (result) {
+		dev_info(ctodev(card), "%s:request_irq failed (%d)\n",
+			__func__, result);
+		goto fail_request_irq;
+	}
+
+	/* setup card structure */
+	card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
+		GELIC_CARD_PORT_STATUS_CHANGED;
+
+
+	result = gelic_card_init_chain(card, &card->tx_chain,
+				       card->descr, GELIC_NET_TX_DESCRIPTORS);
+	if (result)
+		goto fail_alloc_tx;
+	result = gelic_card_init_chain(card, &card->rx_chain,
+				       card->descr + GELIC_NET_TX_DESCRIPTORS,
+				       GELIC_NET_RX_DESCRIPTORS);
+	if (result)
+		goto fail_alloc_rx;
+
+	/* head of chain */
+	card->tx_top = card->tx_chain.head;
+	card->rx_top = card->rx_chain.head;
+	dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
+		card->rx_top, card->tx_top, sizeof(struct gelic_descr),
+		GELIC_NET_RX_DESCRIPTORS);
+	/* allocate rx skbs */
+	result = gelic_card_alloc_rx_skbs(card);
+	if (result)
+		goto fail_alloc_skbs;
+
+	spin_lock_init(&card->tx_lock);
+	card->tx_dma_progress = 0;
+
+	/* setup net_device structure */
+	netdev->irq = card->irq;
+	SET_NETDEV_DEV(netdev, &card->dev->core);
+	gelic_ether_setup_netdev_ops(netdev, &card->napi);
+	result = gelic_net_setup_netdev(netdev, card);
+	if (result) {
+		dev_dbg(&dev->core, "%s: setup_netdev failed %d\n",
+			__func__, result);
+		goto fail_setup_netdev;
+	}
+
+#ifdef CONFIG_GELIC_WIRELESS
+	result = gelic_wl_driver_probe(card);
+	if (result) {
+		dev_dbg(&dev->core, "%s: WL init failed\n", __func__);
+		goto fail_setup_netdev;
+	}
+#endif
+	pr_debug("%s: done\n", __func__);
+	return 0;
+
+fail_setup_netdev:
+fail_alloc_skbs:
+	gelic_card_free_chain(card, card->rx_chain.head);
+fail_alloc_rx:
+	gelic_card_free_chain(card, card->tx_chain.head);
+fail_alloc_tx:
+	free_irq(card->irq, card);
+	netdev->irq = 0;
+fail_request_irq:
+	ps3_sb_event_receive_port_destroy(dev, card->irq);
+fail_alloc_irq:
+	lv1_net_set_interrupt_status_indicator(bus_id(card),
+					       bus_id(card),
+					       0, 0);
+fail_status_indicator:
+	ps3_system_bus_set_drvdata(dev, NULL);
+	kfree(netdev_card(netdev)->unalign);
+	free_netdev(netdev);
+fail_alloc_card:
+	ps3_dma_region_free(dev->d_region);
+fail_dma_region:
+	ps3_close_hv_device(dev);
+fail_open:
+	return result;
+}
+
+/**
+ * ps3_gelic_driver_remove - remove a device from the control of this driver
+ */
+
+static int ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
+{
+	struct gelic_card *card = ps3_system_bus_get_drvdata(dev);
+	struct net_device *netdev0;
+	pr_debug("%s: called\n", __func__);
+
+	/* set auto-negotiation */
+	gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG);
+
+#ifdef CONFIG_GELIC_WIRELESS
+	gelic_wl_driver_remove(card);
+#endif
+	/* stop interrupt */
+	gelic_card_set_irq_mask(card, 0);
+
+	/* turn off DMA, force end */
+	gelic_card_disable_rxdmac(card);
+	gelic_card_disable_txdmac(card);
+
+	/* release chains */
+	gelic_card_release_tx_chain(card, 1);
+	gelic_card_release_rx_chain(card);
+
+	gelic_card_free_chain(card, card->tx_top);
+	gelic_card_free_chain(card, card->rx_top);
+
+	netdev0 = card->netdev[GELIC_PORT_ETHERNET_0];
+	/* disconnect event port */
+	free_irq(card->irq, card);
+	netdev0->irq = 0;
+	ps3_sb_event_receive_port_destroy(card->dev, card->irq);
+
+	wait_event(card->waitq,
+		   atomic_read(&card->tx_timeout_task_counter) == 0);
+
+	lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
+					       0 , 0);
+
+	unregister_netdev(netdev0);
+	kfree(netdev_card(netdev0)->unalign);
+	free_netdev(netdev0);
+
+	ps3_system_bus_set_drvdata(dev, NULL);
+
+	ps3_dma_region_free(dev->d_region);
+
+	ps3_close_hv_device(dev);
+
+	pr_debug("%s: done\n", __func__);
+	return 0;
+}
+
+static struct ps3_system_bus_driver ps3_gelic_driver = {
+	.match_id = PS3_MATCH_ID_GELIC,
+	.probe = ps3_gelic_driver_probe,
+	.remove = ps3_gelic_driver_remove,
+	.shutdown = ps3_gelic_driver_remove,
+	.core.name = "ps3_gelic_driver",
+	.core.owner = THIS_MODULE,
+};
+
+static int __init ps3_gelic_driver_init (void)
+{
+	return firmware_has_feature(FW_FEATURE_PS3_LV1)
+		? ps3_system_bus_driver_register(&ps3_gelic_driver)
+		: -ENODEV;
+}
+
+static void __exit ps3_gelic_driver_exit (void)
+{
+	ps3_system_bus_driver_unregister(&ps3_gelic_driver);
+}
+
+module_init(ps3_gelic_driver_init);
+module_exit(ps3_gelic_driver_exit);
+
+MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
+
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
new file mode 100644
index 000000000..fbbf9b54b
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
@@ -0,0 +1,383 @@
+/*
+ *  PS3 Platfom gelic network driver.
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2006, 2007 Sony Corporation.
+ *
+ * This file is based on: spider_net.h
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Authors : Utz Bacher <utz.bacher@de.ibm.com>
+ *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _GELIC_NET_H
+#define _GELIC_NET_H
+
+/* descriptors */
+#define GELIC_NET_RX_DESCRIPTORS        128 /* num of descriptors */
+#define GELIC_NET_TX_DESCRIPTORS        128 /* num of descriptors */
+
+#define GELIC_NET_MAX_MTU               VLAN_ETH_FRAME_LEN
+#define GELIC_NET_MIN_MTU               VLAN_ETH_ZLEN
+#define GELIC_NET_RXBUF_ALIGN           128
+#define GELIC_CARD_RX_CSUM_DEFAULT      1 /* hw chksum */
+#define GELIC_NET_WATCHDOG_TIMEOUT      5*HZ
+#define GELIC_NET_BROADCAST_ADDR        0xffffffffffffL
+
+#define GELIC_NET_MC_COUNT_MAX          32 /* multicast address list */
+
+/* virtual interrupt status register bits */
+	/* INT1 */
+#define GELIC_CARD_TX_RAM_FULL_ERR           0x0000000000000001L
+#define GELIC_CARD_RX_RAM_FULL_ERR           0x0000000000000002L
+#define GELIC_CARD_TX_SHORT_FRAME_ERR        0x0000000000000004L
+#define GELIC_CARD_TX_INVALID_DESCR_ERR      0x0000000000000008L
+#define GELIC_CARD_RX_FIFO_FULL_ERR          0x0000000000002000L
+#define GELIC_CARD_RX_DESCR_CHAIN_END        0x0000000000004000L
+#define GELIC_CARD_RX_INVALID_DESCR_ERR      0x0000000000008000L
+#define GELIC_CARD_TX_RESPONCE_ERR           0x0000000000010000L
+#define GELIC_CARD_RX_RESPONCE_ERR           0x0000000000100000L
+#define GELIC_CARD_TX_PROTECTION_ERR         0x0000000000400000L
+#define GELIC_CARD_RX_PROTECTION_ERR         0x0000000004000000L
+#define GELIC_CARD_TX_TCP_UDP_CHECKSUM_ERR   0x0000000008000000L
+#define GELIC_CARD_PORT_STATUS_CHANGED       0x0000000020000000L
+#define GELIC_CARD_WLAN_EVENT_RECEIVED       0x0000000040000000L
+#define GELIC_CARD_WLAN_COMMAND_COMPLETED    0x0000000080000000L
+	/* INT 0 */
+#define GELIC_CARD_TX_FLAGGED_DESCR          0x0004000000000000L
+#define GELIC_CARD_RX_FLAGGED_DESCR          0x0040000000000000L
+#define GELIC_CARD_TX_TRANSFER_END           0x0080000000000000L
+#define GELIC_CARD_TX_DESCR_CHAIN_END        0x0100000000000000L
+#define GELIC_CARD_NUMBER_OF_RX_FRAME        0x1000000000000000L
+#define GELIC_CARD_ONE_TIME_COUNT_TIMER      0x4000000000000000L
+#define GELIC_CARD_FREE_RUN_COUNT_TIMER      0x8000000000000000L
+
+/* initial interrupt mask */
+#define GELIC_CARD_TXINT	GELIC_CARD_TX_DESCR_CHAIN_END
+
+#define GELIC_CARD_RXINT	(GELIC_CARD_RX_DESCR_CHAIN_END | \
+				 GELIC_CARD_NUMBER_OF_RX_FRAME)
+
+ /* RX descriptor data_status bits */
+enum gelic_descr_rx_status {
+	GELIC_DESCR_RXDMADU	= 0x80000000, /* destination MAC addr unknown */
+	GELIC_DESCR_RXLSTFBF	= 0x40000000, /* last frame buffer            */
+	GELIC_DESCR_RXIPCHK	= 0x20000000, /* IP checksum performed        */
+	GELIC_DESCR_RXTCPCHK	= 0x10000000, /* TCP/UDP checksup performed   */
+	GELIC_DESCR_RXWTPKT	= 0x00C00000, /*
+					       * wakeup trigger packet
+					       * 01: Magic Packet (TM)
+					       * 10: ARP packet
+					       * 11: Multicast MAC addr
+					       */
+	GELIC_DESCR_RXVLNPKT	= 0x00200000, /* VLAN packet */
+	/* bit 20..16 reserved */
+	GELIC_DESCR_RXRRECNUM	= 0x0000ff00, /* reception receipt number */
+	/* bit 7..0 reserved */
+};
+
+#define GELIC_DESCR_DATA_STATUS_CHK_MASK	\
+	(GELIC_DESCR_RXIPCHK | GELIC_DESCR_RXTCPCHK)
+
+ /* TX descriptor data_status bits */
+enum gelic_descr_tx_status {
+	GELIC_DESCR_TX_TAIL	= 0x00000001, /* gelic treated this
+					       * descriptor was end of
+					       * a tx frame
+					       */
+};
+
+/* RX descriptor data error bits */
+enum gelic_descr_rx_error {
+	/* bit 31 reserved */
+	GELIC_DESCR_RXALNERR	= 0x40000000, /* alignement error 10/100M */
+	GELIC_DESCR_RXOVERERR	= 0x20000000, /* oversize error */
+	GELIC_DESCR_RXRNTERR	= 0x10000000, /* Runt error */
+	GELIC_DESCR_RXIPCHKERR	= 0x08000000, /* IP checksum  error */
+	GELIC_DESCR_RXTCPCHKERR	= 0x04000000, /* TCP/UDP checksum  error */
+	GELIC_DESCR_RXDRPPKT	= 0x00100000, /* drop packet */
+	GELIC_DESCR_RXIPFMTERR	= 0x00080000, /* IP packet format error */
+	/* bit 18 reserved */
+	GELIC_DESCR_RXDATAERR	= 0x00020000, /* IP packet format error */
+	GELIC_DESCR_RXCALERR	= 0x00010000, /* cariier extension length
+					      * error */
+	GELIC_DESCR_RXCREXERR	= 0x00008000, /* carrier extension error */
+	GELIC_DESCR_RXMLTCST	= 0x00004000, /* multicast address frame */
+	/* bit 13..0 reserved */
+};
+#define GELIC_DESCR_DATA_ERROR_CHK_MASK		\
+	(GELIC_DESCR_RXIPCHKERR | GELIC_DESCR_RXTCPCHKERR)
+
+/* DMA command and status (RX and TX)*/
+enum gelic_descr_dma_status {
+	GELIC_DESCR_DMA_COMPLETE            = 0x00000000, /* used in tx */
+	GELIC_DESCR_DMA_BUFFER_FULL         = 0x00000000, /* used in rx */
+	GELIC_DESCR_DMA_RESPONSE_ERROR      = 0x10000000, /* used in rx, tx */
+	GELIC_DESCR_DMA_PROTECTION_ERROR    = 0x20000000, /* used in rx, tx */
+	GELIC_DESCR_DMA_FRAME_END           = 0x40000000, /* used in rx */
+	GELIC_DESCR_DMA_FORCE_END           = 0x50000000, /* used in rx, tx */
+	GELIC_DESCR_DMA_CARDOWNED           = 0xa0000000, /* used in rx, tx */
+	GELIC_DESCR_DMA_NOT_IN_USE          = 0xb0000000, /* any other value */
+};
+
+#define GELIC_DESCR_DMA_STAT_MASK	(0xf0000000)
+
+/* tx descriptor command and status */
+enum gelic_descr_tx_dma_status {
+	/* [19] */
+	GELIC_DESCR_TX_DMA_IKE		= 0x00080000, /* IPSEC off */
+	/* [18] */
+	GELIC_DESCR_TX_DMA_FRAME_TAIL	= 0x00040000, /* last descriptor of
+						       * the packet
+						       */
+	/* [17..16] */
+	GELIC_DESCR_TX_DMA_TCP_CHKSUM	= 0x00020000, /* TCP packet */
+	GELIC_DESCR_TX_DMA_UDP_CHKSUM	= 0x00030000, /* UDP packet */
+	GELIC_DESCR_TX_DMA_NO_CHKSUM	= 0x00000000, /* no checksum */
+
+	/* [1] */
+	GELIC_DESCR_TX_DMA_CHAIN_END	= 0x00000002, /* DMA terminated
+						       * due to chain end
+						       */
+};
+
+#define GELIC_DESCR_DMA_CMD_NO_CHKSUM	\
+	(GELIC_DESCR_DMA_CARDOWNED | GELIC_DESCR_TX_DMA_IKE | \
+	GELIC_DESCR_TX_DMA_NO_CHKSUM)
+
+#define GELIC_DESCR_DMA_CMD_TCP_CHKSUM	\
+	(GELIC_DESCR_DMA_CARDOWNED | GELIC_DESCR_TX_DMA_IKE | \
+	GELIC_DESCR_TX_DMA_TCP_CHKSUM)
+
+#define GELIC_DESCR_DMA_CMD_UDP_CHKSUM	\
+	(GELIC_DESCR_DMA_CARDOWNED | GELIC_DESCR_TX_DMA_IKE | \
+	GELIC_DESCR_TX_DMA_UDP_CHKSUM)
+
+enum gelic_descr_rx_dma_status {
+	/* [ 1 ] */
+	GELIC_DESCR_RX_DMA_CHAIN_END	= 0x00000002, /* DMA terminated
+						       * due to chain end
+						       */
+};
+
+/* for lv1_net_control */
+enum gelic_lv1_net_control_code {
+	GELIC_LV1_GET_MAC_ADDRESS	= 1,
+	GELIC_LV1_GET_ETH_PORT_STATUS	= 2,
+	GELIC_LV1_SET_NEGOTIATION_MODE	= 3,
+	GELIC_LV1_GET_VLAN_ID		= 4,
+	GELIC_LV1_SET_WOL		= 5,
+	GELIC_LV1_GET_CHANNEL           = 6,
+	GELIC_LV1_POST_WLAN_CMD		= 9,
+	GELIC_LV1_GET_WLAN_CMD_RESULT	= 10,
+	GELIC_LV1_GET_WLAN_EVENT	= 11,
+};
+
+/* for GELIC_LV1_SET_WOL */
+enum gelic_lv1_wol_command {
+	GELIC_LV1_WOL_MAGIC_PACKET	= 1,
+	GELIC_LV1_WOL_ADD_MATCH_ADDR	= 6,
+	GELIC_LV1_WOL_DELETE_MATCH_ADDR	= 7,
+};
+
+/* for GELIC_LV1_WOL_MAGIC_PACKET */
+enum gelic_lv1_wol_mp_arg {
+	GELIC_LV1_WOL_MP_DISABLE	= 0,
+	GELIC_LV1_WOL_MP_ENABLE		= 1,
+};
+
+/* for GELIC_LV1_WOL_{ADD,DELETE}_MATCH_ADDR */
+enum gelic_lv1_wol_match_arg {
+	GELIC_LV1_WOL_MATCH_INDIVIDUAL	= 0,
+	GELIC_LV1_WOL_MATCH_ALL		= 1,
+};
+
+/* status returened from GET_ETH_PORT_STATUS */
+enum gelic_lv1_ether_port_status {
+	GELIC_LV1_ETHER_LINK_UP		= 0x0000000000000001L,
+	GELIC_LV1_ETHER_FULL_DUPLEX	= 0x0000000000000002L,
+	GELIC_LV1_ETHER_AUTO_NEG	= 0x0000000000000004L,
+
+	GELIC_LV1_ETHER_SPEED_10	= 0x0000000000000010L,
+	GELIC_LV1_ETHER_SPEED_100	= 0x0000000000000020L,
+	GELIC_LV1_ETHER_SPEED_1000	= 0x0000000000000040L,
+	GELIC_LV1_ETHER_SPEED_MASK	= 0x0000000000000070L,
+};
+
+enum gelic_lv1_vlan_index {
+	/* for outgoing packets */
+	GELIC_LV1_VLAN_TX_ETHERNET_0	= 0x0000000000000002L,
+	GELIC_LV1_VLAN_TX_WIRELESS	= 0x0000000000000003L,
+
+	/* for incoming packets */
+	GELIC_LV1_VLAN_RX_ETHERNET_0	= 0x0000000000000012L,
+	GELIC_LV1_VLAN_RX_WIRELESS	= 0x0000000000000013L,
+};
+
+enum gelic_lv1_phy {
+	GELIC_LV1_PHY_ETHERNET_0	= 0x0000000000000002L,
+};
+
+/* size of hardware part of gelic descriptor */
+#define GELIC_DESCR_SIZE	(32)
+
+enum gelic_port_type {
+	GELIC_PORT_ETHERNET_0	= 0,
+	GELIC_PORT_WIRELESS	= 1,
+	GELIC_PORT_MAX
+};
+
+struct gelic_descr {
+	/* as defined by the hardware */
+	__be32 buf_addr;
+	__be32 buf_size;
+	__be32 next_descr_addr;
+	__be32 dmac_cmd_status;
+	__be32 result_size;
+	__be32 valid_size;	/* all zeroes for tx */
+	__be32 data_status;
+	__be32 data_error;	/* all zeroes for tx */
+
+	/* used in the driver */
+	struct sk_buff *skb;
+	dma_addr_t bus_addr;
+	struct gelic_descr *next;
+	struct gelic_descr *prev;
+} __attribute__((aligned(32)));
+
+struct gelic_descr_chain {
+	/* we walk from tail to head */
+	struct gelic_descr *head;
+	struct gelic_descr *tail;
+};
+
+struct gelic_vlan_id {
+	u16 tx;
+	u16 rx;
+};
+
+struct gelic_card {
+	struct napi_struct napi;
+	struct net_device *netdev[GELIC_PORT_MAX];
+	/*
+	 * hypervisor requires irq_status should be
+	 * 8 bytes aligned, but u64 member is
+	 * always disposed in that manner
+	 */
+	u64 irq_status;
+	u64 irq_mask;
+
+	struct ps3_system_bus_device *dev;
+	struct gelic_vlan_id vlan[GELIC_PORT_MAX];
+	int vlan_required;
+
+	struct gelic_descr_chain tx_chain;
+	struct gelic_descr_chain rx_chain;
+	/*
+	 * tx_lock guards tx descriptor list and
+	 * tx_dma_progress.
+	 */
+	spinlock_t tx_lock;
+	int tx_dma_progress;
+
+	struct work_struct tx_timeout_task;
+	atomic_t tx_timeout_task_counter;
+	wait_queue_head_t waitq;
+
+	/* only first user should up the card */
+	struct mutex updown_lock;
+	atomic_t users;
+
+	u64 ether_port_status;
+	int link_mode;
+
+	/* original address returned by kzalloc */
+	void *unalign;
+
+	/*
+	 * each netdevice has copy of irq
+	 */
+	unsigned int irq;
+	struct gelic_descr *tx_top, *rx_top;
+	struct gelic_descr descr[0]; /* must be the last */
+};
+
+struct gelic_port {
+	struct gelic_card *card;
+	struct net_device *netdev;
+	enum gelic_port_type type;
+	long priv[0]; /* long for alignment */
+};
+
+static inline struct gelic_card *port_to_card(struct gelic_port *p)
+{
+	return p->card;
+}
+static inline struct net_device *port_to_netdev(struct gelic_port *p)
+{
+	return p->netdev;
+}
+static inline struct gelic_card *netdev_card(struct net_device *d)
+{
+	return ((struct gelic_port *)netdev_priv(d))->card;
+}
+static inline struct gelic_port *netdev_port(struct net_device *d)
+{
+	return (struct gelic_port *)netdev_priv(d);
+}
+static inline struct device *ctodev(struct gelic_card *card)
+{
+	return &card->dev->core;
+}
+static inline u64 bus_id(struct gelic_card *card)
+{
+	return card->dev->bus_id;
+}
+static inline u64 dev_id(struct gelic_card *card)
+{
+	return card->dev->dev_id;
+}
+
+static inline void *port_priv(struct gelic_port *port)
+{
+	return port->priv;
+}
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_PS3GELIC
+void udbg_shutdown_ps3gelic(void);
+#else
+static inline void udbg_shutdown_ps3gelic(void) {}
+#endif
+
+int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask);
+/* shared netdev ops */
+void gelic_card_up(struct gelic_card *card);
+void gelic_card_down(struct gelic_card *card);
+int gelic_net_open(struct net_device *netdev);
+int gelic_net_stop(struct net_device *netdev);
+netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev);
+void gelic_net_set_multi(struct net_device *netdev);
+void gelic_net_tx_timeout(struct net_device *netdev);
+int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card);
+
+/* shared ethtool ops */
+void gelic_net_get_drvinfo(struct net_device *netdev,
+			   struct ethtool_drvinfo *info);
+void gelic_net_poll_controller(struct net_device *netdev);
+
+#endif /* _GELIC_NET_H */
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c
new file mode 100644
index 000000000..302079e22
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c
@@ -0,0 +1,2670 @@
+/*
+ *  PS3 gelic network driver.
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2007 Sony Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+#include <linux/if_arp.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <net/iw_handler.h>
+
+#include <linux/dma-mapping.h>
+#include <net/checksum.h>
+#include <asm/firmware.h>
+#include <asm/ps3.h>
+#include <asm/lv1call.h>
+
+#include "ps3_gelic_net.h"
+#include "ps3_gelic_wireless.h"
+
+
+static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan,
+			       u8 *essid, size_t essid_len);
+static int gelic_wl_try_associate(struct net_device *netdev);
+
+/*
+ * tables
+ */
+
+/* 802.11b/g channel to freq in MHz */
+static const int channel_freq[] = {
+	2412, 2417, 2422, 2427, 2432,
+	2437, 2442, 2447, 2452, 2457,
+	2462, 2467, 2472, 2484
+};
+#define NUM_CHANNELS ARRAY_SIZE(channel_freq)
+
+/* in bps */
+static const int bitrate_list[] = {
+	  1000000,
+	  2000000,
+	  5500000,
+	 11000000,
+	  6000000,
+	  9000000,
+	 12000000,
+	 18000000,
+	 24000000,
+	 36000000,
+	 48000000,
+	 54000000
+};
+#define NUM_BITRATES ARRAY_SIZE(bitrate_list)
+
+/*
+ * wpa2 support requires the hypervisor version 2.0 or later
+ */
+static inline int wpa2_capable(void)
+{
+	return 0 <= ps3_compare_firmware_version(2, 0, 0);
+}
+
+static inline int precise_ie(void)
+{
+	return 0 <= ps3_compare_firmware_version(2, 2, 0);
+}
+/*
+ * post_eurus_cmd helpers
+ */
+struct eurus_cmd_arg_info {
+	int pre_arg; /* command requires arg1, arg2 at POST COMMAND */
+	int post_arg; /* command requires arg1, arg2 at GET_RESULT */
+};
+
+static const struct eurus_cmd_arg_info cmd_info[GELIC_EURUS_CMD_MAX_INDEX] = {
+	[GELIC_EURUS_CMD_SET_COMMON_CFG] = { .pre_arg = 1},
+	[GELIC_EURUS_CMD_SET_WEP_CFG]    = { .pre_arg = 1},
+	[GELIC_EURUS_CMD_SET_WPA_CFG]    = { .pre_arg = 1},
+	[GELIC_EURUS_CMD_GET_COMMON_CFG] = { .post_arg = 1},
+	[GELIC_EURUS_CMD_GET_WEP_CFG]    = { .post_arg = 1},
+	[GELIC_EURUS_CMD_GET_WPA_CFG]    = { .post_arg = 1},
+	[GELIC_EURUS_CMD_GET_RSSI_CFG]   = { .post_arg = 1},
+	[GELIC_EURUS_CMD_START_SCAN]     = { .pre_arg = 1},
+	[GELIC_EURUS_CMD_GET_SCAN]       = { .post_arg = 1},
+};
+
+#ifdef DEBUG
+static const char *cmdstr(enum gelic_eurus_command ix)
+{
+	switch (ix) {
+	case GELIC_EURUS_CMD_ASSOC:
+		return "ASSOC";
+	case GELIC_EURUS_CMD_DISASSOC:
+		return "DISASSOC";
+	case GELIC_EURUS_CMD_START_SCAN:
+		return "SCAN";
+	case GELIC_EURUS_CMD_GET_SCAN:
+		return "GET SCAN";
+	case GELIC_EURUS_CMD_SET_COMMON_CFG:
+		return "SET_COMMON_CFG";
+	case GELIC_EURUS_CMD_GET_COMMON_CFG:
+		return "GET_COMMON_CFG";
+	case GELIC_EURUS_CMD_SET_WEP_CFG:
+		return "SET_WEP_CFG";
+	case GELIC_EURUS_CMD_GET_WEP_CFG:
+		return "GET_WEP_CFG";
+	case GELIC_EURUS_CMD_SET_WPA_CFG:
+		return "SET_WPA_CFG";
+	case GELIC_EURUS_CMD_GET_WPA_CFG:
+		return "GET_WPA_CFG";
+	case GELIC_EURUS_CMD_GET_RSSI_CFG:
+		return "GET_RSSI";
+	default:
+		break;
+	}
+	return "";
+};
+#else
+static inline const char *cmdstr(enum gelic_eurus_command ix)
+{
+	return "";
+}
+#endif
+
+/* synchronously do eurus commands */
+static void gelic_eurus_sync_cmd_worker(struct work_struct *work)
+{
+	struct gelic_eurus_cmd *cmd;
+	struct gelic_card *card;
+	struct gelic_wl_info *wl;
+
+	u64 arg1, arg2;
+
+	pr_debug("%s: <-\n", __func__);
+	cmd = container_of(work, struct gelic_eurus_cmd, work);
+	BUG_ON(cmd_info[cmd->cmd].pre_arg &&
+	       cmd_info[cmd->cmd].post_arg);
+	wl = cmd->wl;
+	card = port_to_card(wl_port(wl));
+
+	if (cmd_info[cmd->cmd].pre_arg) {
+		arg1 = (cmd->buffer) ?
+			ps3_mm_phys_to_lpar(__pa(cmd->buffer)) :
+			0;
+		arg2 = cmd->buf_size;
+	} else {
+		arg1 = 0;
+		arg2 = 0;
+	}
+	init_completion(&wl->cmd_done_intr);
+	pr_debug("%s: cmd='%s' start\n", __func__, cmdstr(cmd->cmd));
+	cmd->status = lv1_net_control(bus_id(card), dev_id(card),
+				      GELIC_LV1_POST_WLAN_CMD,
+				      cmd->cmd, arg1, arg2,
+				      &cmd->tag, &cmd->size);
+	if (cmd->status) {
+		complete(&cmd->done);
+		pr_info("%s: cmd issue failed\n", __func__);
+		return;
+	}
+
+	wait_for_completion(&wl->cmd_done_intr);
+
+	if (cmd_info[cmd->cmd].post_arg) {
+		arg1 = ps3_mm_phys_to_lpar(__pa(cmd->buffer));
+		arg2 = cmd->buf_size;
+	} else {
+		arg1 = 0;
+		arg2 = 0;
+	}
+
+	cmd->status = lv1_net_control(bus_id(card), dev_id(card),
+				      GELIC_LV1_GET_WLAN_CMD_RESULT,
+				      cmd->tag, arg1, arg2,
+				      &cmd->cmd_status, &cmd->size);
+#ifdef DEBUG
+	if (cmd->status || cmd->cmd_status) {
+	pr_debug("%s: cmd done tag=%#lx arg1=%#lx, arg2=%#lx\n", __func__,
+		 cmd->tag, arg1, arg2);
+	pr_debug("%s: cmd done status=%#x cmd_status=%#lx size=%#lx\n",
+		 __func__, cmd->status, cmd->cmd_status, cmd->size);
+	}
+#endif
+	complete(&cmd->done);
+	pr_debug("%s: cmd='%s' done\n", __func__, cmdstr(cmd->cmd));
+}
+
+static struct gelic_eurus_cmd *gelic_eurus_sync_cmd(struct gelic_wl_info *wl,
+						    unsigned int eurus_cmd,
+						    void *buffer,
+						    unsigned int buf_size)
+{
+	struct gelic_eurus_cmd *cmd;
+
+	/* allocate cmd */
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return NULL;
+
+	/* initialize members */
+	cmd->cmd = eurus_cmd;
+	cmd->buffer = buffer;
+	cmd->buf_size = buf_size;
+	cmd->wl = wl;
+	INIT_WORK(&cmd->work, gelic_eurus_sync_cmd_worker);
+	init_completion(&cmd->done);
+	queue_work(wl->eurus_cmd_queue, &cmd->work);
+
+	/* wait for command completion */
+	wait_for_completion(&cmd->done);
+
+	return cmd;
+}
+
+static u32 gelic_wl_get_link(struct net_device *netdev)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_port(netdev));
+	u32 ret;
+
+	pr_debug("%s: <-\n", __func__);
+	mutex_lock(&wl->assoc_stat_lock);
+	if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED)
+		ret = 1;
+	else
+		ret = 0;
+	mutex_unlock(&wl->assoc_stat_lock);
+	pr_debug("%s: ->\n", __func__);
+	return ret;
+}
+
+static void gelic_wl_send_iwap_event(struct gelic_wl_info *wl, u8 *bssid)
+{
+	union iwreq_data data;
+
+	memset(&data, 0, sizeof(data));
+	if (bssid)
+		memcpy(data.ap_addr.sa_data, bssid, ETH_ALEN);
+	data.ap_addr.sa_family = ARPHRD_ETHER;
+	wireless_send_event(port_to_netdev(wl_port(wl)), SIOCGIWAP,
+			    &data, NULL);
+}
+
+/*
+ * wireless extension handlers and helpers
+ */
+
+/* SIOGIWNAME */
+static int gelic_wl_get_name(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *iwreq, char *extra)
+{
+	strcpy(iwreq->name, "IEEE 802.11bg");
+	return 0;
+}
+
+static void gelic_wl_get_ch_info(struct gelic_wl_info *wl)
+{
+	struct gelic_card *card = port_to_card(wl_port(wl));
+	u64 ch_info_raw, tmp;
+	int status;
+
+	if (!test_and_set_bit(GELIC_WL_STAT_CH_INFO, &wl->stat)) {
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					 GELIC_LV1_GET_CHANNEL, 0, 0, 0,
+					 &ch_info_raw,
+					 &tmp);
+		/* some fw versions may return error */
+		if (status) {
+			if (status != LV1_NO_ENTRY)
+				pr_info("%s: available ch unknown\n", __func__);
+			wl->ch_info = 0x07ff;/* 11 ch */
+		} else
+			/* 16 bits of MSB has available channels */
+			wl->ch_info = ch_info_raw >> 48;
+	}
+}
+
+/* SIOGIWRANGE */
+static int gelic_wl_get_range(struct net_device *netdev,
+			      struct iw_request_info *info,
+			      union iwreq_data *iwreq, char *extra)
+{
+	struct iw_point *point = &iwreq->data;
+	struct iw_range *range = (struct iw_range *)extra;
+	struct gelic_wl_info *wl = port_wl(netdev_port(netdev));
+	unsigned int i, chs;
+
+	pr_debug("%s: <-\n", __func__);
+	point->length = sizeof(struct iw_range);
+	memset(range, 0, sizeof(struct iw_range));
+
+	range->we_version_compiled = WIRELESS_EXT;
+	range->we_version_source = 22;
+
+	/* available channels and frequencies */
+	gelic_wl_get_ch_info(wl);
+
+	for (i = 0, chs = 0;
+	     i < NUM_CHANNELS && chs < IW_MAX_FREQUENCIES; i++)
+		if (wl->ch_info & (1 << i)) {
+			range->freq[chs].i = i + 1;
+			range->freq[chs].m = channel_freq[i];
+			range->freq[chs].e = 6;
+			chs++;
+		}
+	range->num_frequency = chs;
+	range->old_num_frequency = chs;
+	range->num_channels = chs;
+	range->old_num_channels = chs;
+
+	/* bitrates */
+	for (i = 0; i < NUM_BITRATES; i++)
+		range->bitrate[i] = bitrate_list[i];
+	range->num_bitrates = i;
+
+	/* signal levels */
+	range->max_qual.qual = 100; /* relative value */
+	range->max_qual.level = 100;
+	range->avg_qual.qual = 50;
+	range->avg_qual.level = 50;
+	range->sensitivity = 0;
+
+	/* Event capability */
+	IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
+	IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
+	IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
+
+	/* encryption capability */
+	range->enc_capa = IW_ENC_CAPA_WPA |
+		IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP |
+		IW_ENC_CAPA_4WAY_HANDSHAKE;
+	if (wpa2_capable())
+		range->enc_capa |= IW_ENC_CAPA_WPA2;
+	range->encoding_size[0] = 5;	/* 40bit WEP */
+	range->encoding_size[1] = 13;	/* 104bit WEP */
+	range->encoding_size[2] = 32;	/* WPA-PSK */
+	range->num_encoding_sizes = 3;
+	range->max_encoding_tokens = GELIC_WEP_KEYS;
+
+	/* scan capability */
+	range->scan_capa = IW_SCAN_CAPA_ESSID;
+
+	pr_debug("%s: ->\n", __func__);
+	return 0;
+
+}
+
+/* SIOC{G,S}IWSCAN */
+static int gelic_wl_set_scan(struct net_device *netdev,
+			   struct iw_request_info *info,
+			   union iwreq_data *wrqu, char *extra)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	struct iw_scan_req *req;
+	u8 *essid = NULL;
+	size_t essid_len = 0;
+
+	if (wrqu->data.length == sizeof(struct iw_scan_req) &&
+	    wrqu->data.flags & IW_SCAN_THIS_ESSID) {
+		req = (struct iw_scan_req*)extra;
+		essid = req->essid;
+		essid_len = req->essid_len;
+		pr_debug("%s: ESSID scan =%s\n", __func__, essid);
+	}
+	return gelic_wl_start_scan(wl, 1, essid, essid_len);
+}
+
+#define OUI_LEN 3
+static const u8 rsn_oui[OUI_LEN] = { 0x00, 0x0f, 0xac };
+static const u8 wpa_oui[OUI_LEN] = { 0x00, 0x50, 0xf2 };
+
+/*
+ * synthesize WPA/RSN IE data
+ * See WiFi WPA specification and IEEE 802.11-2007 7.3.2.25
+ * for the format
+ */
+static size_t gelic_wl_synthesize_ie(u8 *buf,
+				     struct gelic_eurus_scan_info *scan)
+{
+
+	const u8 *oui_header;
+	u8 *start = buf;
+	int rsn;
+	int ccmp;
+
+	pr_debug("%s: <- sec=%16x\n", __func__, scan->security);
+	switch (be16_to_cpu(scan->security) & GELIC_EURUS_SCAN_SEC_MASK) {
+	case GELIC_EURUS_SCAN_SEC_WPA:
+		rsn = 0;
+		break;
+	case GELIC_EURUS_SCAN_SEC_WPA2:
+		rsn = 1;
+		break;
+	default:
+		/* WEP or none.  No IE returned */
+		return 0;
+	}
+
+	switch (be16_to_cpu(scan->security) & GELIC_EURUS_SCAN_SEC_WPA_MASK) {
+	case GELIC_EURUS_SCAN_SEC_WPA_TKIP:
+		ccmp = 0;
+		break;
+	case GELIC_EURUS_SCAN_SEC_WPA_AES:
+		ccmp = 1;
+		break;
+	default:
+		if (rsn) {
+			ccmp = 1;
+			pr_info("%s: no cipher info. defaulted to CCMP\n",
+				__func__);
+		} else {
+			ccmp = 0;
+			pr_info("%s: no cipher info. defaulted to TKIP\n",
+				__func__);
+		}
+	}
+
+	if (rsn)
+		oui_header = rsn_oui;
+	else
+		oui_header = wpa_oui;
+
+	/* element id */
+	if (rsn)
+		*buf++ = WLAN_EID_RSN;
+	else
+		*buf++ = WLAN_EID_VENDOR_SPECIFIC;
+
+	/* length filed; set later */
+	buf++;
+
+	/* wpa special header */
+	if (!rsn) {
+		memcpy(buf, wpa_oui, OUI_LEN);
+		buf += OUI_LEN;
+		*buf++ = 0x01;
+	}
+
+	/* version */
+	*buf++ = 0x01; /* version 1.0 */
+	*buf++ = 0x00;
+
+	/* group cipher */
+	memcpy(buf, oui_header, OUI_LEN);
+	buf += OUI_LEN;
+
+	if (ccmp)
+		*buf++ = 0x04; /* CCMP */
+	else
+		*buf++ = 0x02; /* TKIP */
+
+	/* pairwise key count always 1 */
+	*buf++ = 0x01;
+	*buf++ = 0x00;
+
+	/* pairwise key suit */
+	memcpy(buf, oui_header, OUI_LEN);
+	buf += OUI_LEN;
+	if (ccmp)
+		*buf++ = 0x04; /* CCMP */
+	else
+		*buf++ = 0x02; /* TKIP */
+
+	/* AKM count is 1 */
+	*buf++ = 0x01;
+	*buf++ = 0x00;
+
+	/* AKM suite is assumed as PSK*/
+	memcpy(buf, oui_header, OUI_LEN);
+	buf += OUI_LEN;
+	*buf++ = 0x02; /* PSK */
+
+	/* RSN capabilities is 0 */
+	*buf++ = 0x00;
+	*buf++ = 0x00;
+
+	/* set length field */
+	start[1] = (buf - start - 2);
+
+	pr_debug("%s: ->\n", __func__);
+	return buf - start;
+}
+
+struct ie_item {
+	u8 *data;
+	u8 len;
+};
+
+struct ie_info {
+	struct ie_item wpa;
+	struct ie_item rsn;
+};
+
+static void gelic_wl_parse_ie(u8 *data, size_t len,
+			      struct ie_info *ie_info)
+{
+	size_t data_left = len;
+	u8 *pos = data;
+	u8 item_len;
+	u8 item_id;
+
+	pr_debug("%s: data=%p len=%ld\n", __func__,
+		 data, len);
+	memset(ie_info, 0, sizeof(struct ie_info));
+
+	while (2 <= data_left) {
+		item_id = *pos++;
+		item_len = *pos++;
+		data_left -= 2;
+
+		if (data_left < item_len)
+			break;
+
+		switch (item_id) {
+		case WLAN_EID_VENDOR_SPECIFIC:
+			if ((OUI_LEN + 1 <= item_len) &&
+			    !memcmp(pos, wpa_oui, OUI_LEN) &&
+			    pos[OUI_LEN] == 0x01) {
+				ie_info->wpa.data = pos - 2;
+				ie_info->wpa.len = item_len + 2;
+			}
+			break;
+		case WLAN_EID_RSN:
+			ie_info->rsn.data = pos - 2;
+			/* length includes the header */
+			ie_info->rsn.len = item_len + 2;
+			break;
+		default:
+			pr_debug("%s: ignore %#x,%d\n", __func__,
+				 item_id, item_len);
+			break;
+		}
+		pos += item_len;
+		data_left -= item_len;
+	}
+	pr_debug("%s: wpa=%p,%d wpa2=%p,%d\n", __func__,
+		 ie_info->wpa.data, ie_info->wpa.len,
+		 ie_info->rsn.data, ie_info->rsn.len);
+}
+
+
+/*
+ * translate the scan informations from hypervisor to a
+ * independent format
+ */
+static char *gelic_wl_translate_scan(struct net_device *netdev,
+				     struct iw_request_info *info,
+				     char *ev,
+				     char *stop,
+				     struct gelic_wl_scan_info *network)
+{
+	struct iw_event iwe;
+	struct gelic_eurus_scan_info *scan = network->hwinfo;
+	char *tmp;
+	u8 rate;
+	unsigned int i, j, len;
+	u8 buf[64]; /* arbitrary size large enough */
+
+	pr_debug("%s: <-\n", __func__);
+
+	/* first entry should be AP's mac address */
+	iwe.cmd = SIOCGIWAP;
+	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+	memcpy(iwe.u.ap_addr.sa_data, &scan->bssid[2], ETH_ALEN);
+	ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_ADDR_LEN);
+
+	/* ESSID */
+	iwe.cmd = SIOCGIWESSID;
+	iwe.u.data.flags = 1;
+	iwe.u.data.length = strnlen(scan->essid, 32);
+	ev = iwe_stream_add_point(info, ev, stop, &iwe, scan->essid);
+
+	/* FREQUENCY */
+	iwe.cmd = SIOCGIWFREQ;
+	iwe.u.freq.m = be16_to_cpu(scan->channel);
+	iwe.u.freq.e = 0; /* table value in MHz */
+	iwe.u.freq.i = 0;
+	ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_FREQ_LEN);
+
+	/* RATES */
+	iwe.cmd = SIOCGIWRATE;
+	iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+	/* to stuff multiple values in one event */
+	tmp = ev + iwe_stream_lcp_len(info);
+	/* put them in ascendant order (older is first) */
+	i = 0;
+	j = 0;
+	pr_debug("%s: rates=%d rate=%d\n", __func__,
+		 network->rate_len, network->rate_ext_len);
+	while (i < network->rate_len) {
+		if (j < network->rate_ext_len &&
+		    ((scan->ext_rate[j] & 0x7f) < (scan->rate[i] & 0x7f)))
+		    rate = scan->ext_rate[j++] & 0x7f;
+		else
+		    rate = scan->rate[i++] & 0x7f;
+		iwe.u.bitrate.value = rate * 500000; /* 500kbps unit */
+		tmp = iwe_stream_add_value(info, ev, tmp, stop, &iwe,
+					   IW_EV_PARAM_LEN);
+	}
+	while (j < network->rate_ext_len) {
+		iwe.u.bitrate.value = (scan->ext_rate[j++] & 0x7f) * 500000;
+		tmp = iwe_stream_add_value(info, ev, tmp, stop, &iwe,
+					   IW_EV_PARAM_LEN);
+	}
+	/* Check if we added any rate */
+	if (iwe_stream_lcp_len(info) < (tmp - ev))
+		ev = tmp;
+
+	/* ENCODE */
+	iwe.cmd = SIOCGIWENCODE;
+	if (be16_to_cpu(scan->capability) & WLAN_CAPABILITY_PRIVACY)
+		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+	else
+		iwe.u.data.flags = IW_ENCODE_DISABLED;
+	iwe.u.data.length = 0;
+	ev = iwe_stream_add_point(info, ev, stop, &iwe, scan->essid);
+
+	/* MODE */
+	iwe.cmd = SIOCGIWMODE;
+	if (be16_to_cpu(scan->capability) &
+	    (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
+		if (be16_to_cpu(scan->capability) & WLAN_CAPABILITY_ESS)
+			iwe.u.mode = IW_MODE_MASTER;
+		else
+			iwe.u.mode = IW_MODE_ADHOC;
+		ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_UINT_LEN);
+	}
+
+	/* QUAL */
+	iwe.cmd = IWEVQUAL;
+	iwe.u.qual.updated  = IW_QUAL_ALL_UPDATED |
+			IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID;
+	iwe.u.qual.level = be16_to_cpu(scan->rssi);
+	iwe.u.qual.qual = be16_to_cpu(scan->rssi);
+	iwe.u.qual.noise = 0;
+	ev  = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_QUAL_LEN);
+
+	/* RSN */
+	memset(&iwe, 0, sizeof(iwe));
+	if (be16_to_cpu(scan->size) <= sizeof(*scan)) {
+		/* If wpa[2] capable station, synthesize IE and put it */
+		len = gelic_wl_synthesize_ie(buf, scan);
+		if (len) {
+			iwe.cmd = IWEVGENIE;
+			iwe.u.data.length = len;
+			ev = iwe_stream_add_point(info, ev, stop, &iwe, buf);
+		}
+	} else {
+		/* this scan info has IE data */
+		struct ie_info ie_info;
+		size_t data_len;
+
+		data_len = be16_to_cpu(scan->size) - sizeof(*scan);
+
+		gelic_wl_parse_ie(scan->elements, data_len, &ie_info);
+
+		if (ie_info.wpa.len && (ie_info.wpa.len <= sizeof(buf))) {
+			memcpy(buf, ie_info.wpa.data, ie_info.wpa.len);
+			iwe.cmd = IWEVGENIE;
+			iwe.u.data.length = ie_info.wpa.len;
+			ev = iwe_stream_add_point(info, ev, stop, &iwe, buf);
+		}
+
+		if (ie_info.rsn.len && (ie_info.rsn.len <= sizeof(buf))) {
+			memset(&iwe, 0, sizeof(iwe));
+			memcpy(buf, ie_info.rsn.data, ie_info.rsn.len);
+			iwe.cmd = IWEVGENIE;
+			iwe.u.data.length = ie_info.rsn.len;
+			ev = iwe_stream_add_point(info, ev, stop, &iwe, buf);
+		}
+	}
+
+	pr_debug("%s: ->\n", __func__);
+	return ev;
+}
+
+
+static int gelic_wl_get_scan(struct net_device *netdev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	struct gelic_wl_scan_info *scan_info;
+	char *ev = extra;
+	char *stop = ev + wrqu->data.length;
+	int ret = 0;
+	unsigned long this_time = jiffies;
+
+	pr_debug("%s: <-\n", __func__);
+	if (mutex_lock_interruptible(&wl->scan_lock))
+		return -EAGAIN;
+
+	switch (wl->scan_stat) {
+	case GELIC_WL_SCAN_STAT_SCANNING:
+		/* If a scan in progress, caller should call me again */
+		ret = -EAGAIN;
+		goto out;
+	case GELIC_WL_SCAN_STAT_INIT:
+		/* last scan request failed or never issued */
+		ret = -ENODEV;
+		goto out;
+	case GELIC_WL_SCAN_STAT_GOT_LIST:
+		/* ok, use current list */
+		break;
+	}
+
+	list_for_each_entry(scan_info, &wl->network_list, list) {
+		if (wl->scan_age == 0 ||
+		    time_after(scan_info->last_scanned + wl->scan_age,
+			       this_time))
+			ev = gelic_wl_translate_scan(netdev, info,
+						     ev, stop,
+						     scan_info);
+		else
+			pr_debug("%s:entry too old\n", __func__);
+
+		if (stop - ev <= IW_EV_ADDR_LEN) {
+			ret = -E2BIG;
+			goto out;
+		}
+	}
+
+	wrqu->data.length = ev - extra;
+	wrqu->data.flags = 0;
+out:
+	mutex_unlock(&wl->scan_lock);
+	pr_debug("%s: -> %d %d\n", __func__, ret, wrqu->data.length);
+	return ret;
+}
+
+#ifdef DEBUG
+static void scan_list_dump(struct gelic_wl_info *wl)
+{
+	struct gelic_wl_scan_info *scan_info;
+	int i;
+
+	i = 0;
+	list_for_each_entry(scan_info, &wl->network_list, list) {
+		pr_debug("%s: item %d\n", __func__, i++);
+		pr_debug("valid=%d eurusindex=%d last=%lx\n",
+			 scan_info->valid, scan_info->eurus_index,
+			 scan_info->last_scanned);
+		pr_debug("r_len=%d r_ext_len=%d essid_len=%d\n",
+			 scan_info->rate_len, scan_info->rate_ext_len,
+			 scan_info->essid_len);
+		/* -- */
+		pr_debug("bssid=%pM\n", &scan_info->hwinfo->bssid[2]);
+		pr_debug("essid=%s\n", scan_info->hwinfo->essid);
+	}
+}
+#endif
+
+static int gelic_wl_set_auth(struct net_device *netdev,
+			     struct iw_request_info *info,
+			     union iwreq_data *data, char *extra)
+{
+	struct iw_param *param = &data->param;
+	struct gelic_wl_info *wl = port_wl(netdev_port(netdev));
+	unsigned long irqflag;
+	int ret = 0;
+
+	pr_debug("%s: <- %d\n", __func__, param->flags & IW_AUTH_INDEX);
+	spin_lock_irqsave(&wl->lock, irqflag);
+	switch (param->flags & IW_AUTH_INDEX) {
+	case IW_AUTH_WPA_VERSION:
+		if (param->value & IW_AUTH_WPA_VERSION_DISABLED) {
+			pr_debug("%s: NO WPA selected\n", __func__);
+			wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE;
+			wl->group_cipher_method = GELIC_WL_CIPHER_WEP;
+			wl->pairwise_cipher_method = GELIC_WL_CIPHER_WEP;
+		}
+		if (param->value & IW_AUTH_WPA_VERSION_WPA) {
+			pr_debug("%s: WPA version 1 selected\n", __func__);
+			wl->wpa_level = GELIC_WL_WPA_LEVEL_WPA;
+			wl->group_cipher_method = GELIC_WL_CIPHER_TKIP;
+			wl->pairwise_cipher_method = GELIC_WL_CIPHER_TKIP;
+			wl->auth_method = GELIC_EURUS_AUTH_OPEN;
+		}
+		if (param->value & IW_AUTH_WPA_VERSION_WPA2) {
+			/*
+			 * As the hypervisor may not tell the cipher
+			 * information of the AP if it is WPA2,
+			 * you will not decide suitable cipher from
+			 * its beacon.
+			 * You should have knowledge about the AP's
+			 * cipher information in other method prior to
+			 * the association.
+			 */
+			if (!precise_ie())
+				pr_info("%s: WPA2 may not work\n", __func__);
+			if (wpa2_capable()) {
+				wl->wpa_level = GELIC_WL_WPA_LEVEL_WPA2;
+				wl->group_cipher_method = GELIC_WL_CIPHER_AES;
+				wl->pairwise_cipher_method =
+					GELIC_WL_CIPHER_AES;
+				wl->auth_method = GELIC_EURUS_AUTH_OPEN;
+			} else
+				ret = -EINVAL;
+		}
+		break;
+
+	case IW_AUTH_CIPHER_PAIRWISE:
+		if (param->value &
+		    (IW_AUTH_CIPHER_WEP104 | IW_AUTH_CIPHER_WEP40)) {
+			pr_debug("%s: WEP selected\n", __func__);
+			wl->pairwise_cipher_method = GELIC_WL_CIPHER_WEP;
+		}
+		if (param->value & IW_AUTH_CIPHER_TKIP) {
+			pr_debug("%s: TKIP selected\n", __func__);
+			wl->pairwise_cipher_method = GELIC_WL_CIPHER_TKIP;
+		}
+		if (param->value & IW_AUTH_CIPHER_CCMP) {
+			pr_debug("%s: CCMP selected\n", __func__);
+			wl->pairwise_cipher_method = GELIC_WL_CIPHER_AES;
+		}
+		if (param->value & IW_AUTH_CIPHER_NONE) {
+			pr_debug("%s: no auth selected\n", __func__);
+			wl->pairwise_cipher_method = GELIC_WL_CIPHER_NONE;
+		}
+		break;
+	case IW_AUTH_CIPHER_GROUP:
+		if (param->value &
+		    (IW_AUTH_CIPHER_WEP104 | IW_AUTH_CIPHER_WEP40)) {
+			pr_debug("%s: WEP selected\n", __func__);
+			wl->group_cipher_method = GELIC_WL_CIPHER_WEP;
+		}
+		if (param->value & IW_AUTH_CIPHER_TKIP) {
+			pr_debug("%s: TKIP selected\n", __func__);
+			wl->group_cipher_method = GELIC_WL_CIPHER_TKIP;
+		}
+		if (param->value & IW_AUTH_CIPHER_CCMP) {
+			pr_debug("%s: CCMP selected\n", __func__);
+			wl->group_cipher_method = GELIC_WL_CIPHER_AES;
+		}
+		if (param->value & IW_AUTH_CIPHER_NONE) {
+			pr_debug("%s: no auth selected\n", __func__);
+			wl->group_cipher_method = GELIC_WL_CIPHER_NONE;
+		}
+		break;
+	case IW_AUTH_80211_AUTH_ALG:
+		if (param->value & IW_AUTH_ALG_SHARED_KEY) {
+			pr_debug("%s: shared key specified\n", __func__);
+			wl->auth_method = GELIC_EURUS_AUTH_SHARED;
+		} else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
+			pr_debug("%s: open system specified\n", __func__);
+			wl->auth_method = GELIC_EURUS_AUTH_OPEN;
+		} else
+			ret = -EINVAL;
+		break;
+
+	case IW_AUTH_WPA_ENABLED:
+		if (param->value) {
+			pr_debug("%s: WPA enabled\n", __func__);
+			wl->wpa_level = GELIC_WL_WPA_LEVEL_WPA;
+		} else {
+			pr_debug("%s: WPA disabled\n", __func__);
+			wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE;
+		}
+		break;
+
+	case IW_AUTH_KEY_MGMT:
+		if (param->value & IW_AUTH_KEY_MGMT_PSK)
+			break;
+		/* intentionally fall through */
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+
+	if (!ret)
+		set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat);
+
+	spin_unlock_irqrestore(&wl->lock, irqflag);
+	pr_debug("%s: -> %d\n", __func__, ret);
+	return ret;
+}
+
+static int gelic_wl_get_auth(struct net_device *netdev,
+			     struct iw_request_info *info,
+			     union iwreq_data *iwreq, char *extra)
+{
+	struct iw_param *param = &iwreq->param;
+	struct gelic_wl_info *wl = port_wl(netdev_port(netdev));
+	unsigned long irqflag;
+	int ret = 0;
+
+	pr_debug("%s: <- %d\n", __func__, param->flags & IW_AUTH_INDEX);
+	spin_lock_irqsave(&wl->lock, irqflag);
+	switch (param->flags & IW_AUTH_INDEX) {
+	case IW_AUTH_WPA_VERSION:
+		switch (wl->wpa_level) {
+		case GELIC_WL_WPA_LEVEL_WPA:
+			param->value |= IW_AUTH_WPA_VERSION_WPA;
+			break;
+		case GELIC_WL_WPA_LEVEL_WPA2:
+			param->value |= IW_AUTH_WPA_VERSION_WPA2;
+			break;
+		default:
+			param->value |= IW_AUTH_WPA_VERSION_DISABLED;
+		}
+		break;
+
+	case IW_AUTH_80211_AUTH_ALG:
+		if (wl->auth_method == GELIC_EURUS_AUTH_SHARED)
+			param->value = IW_AUTH_ALG_SHARED_KEY;
+		else if (wl->auth_method == GELIC_EURUS_AUTH_OPEN)
+			param->value = IW_AUTH_ALG_OPEN_SYSTEM;
+		break;
+
+	case IW_AUTH_WPA_ENABLED:
+		switch (wl->wpa_level) {
+		case GELIC_WL_WPA_LEVEL_WPA:
+		case GELIC_WL_WPA_LEVEL_WPA2:
+			param->value = 1;
+			break;
+		default:
+			param->value = 0;
+			break;
+		}
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+	}
+
+	spin_unlock_irqrestore(&wl->lock, irqflag);
+	pr_debug("%s: -> %d\n", __func__, ret);
+	return ret;
+}
+
+/* SIOC{S,G}IWESSID */
+static int gelic_wl_set_essid(struct net_device *netdev,
+			      struct iw_request_info *info,
+			      union iwreq_data *data, char *extra)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	unsigned long irqflag;
+
+	pr_debug("%s: <- l=%d f=%d\n", __func__,
+		 data->essid.length, data->essid.flags);
+	if (IW_ESSID_MAX_SIZE < data->essid.length)
+		return -EINVAL;
+
+	spin_lock_irqsave(&wl->lock, irqflag);
+	if (data->essid.flags) {
+		wl->essid_len = data->essid.length;
+		memcpy(wl->essid, extra, wl->essid_len);
+		pr_debug("%s: essid = '%s'\n", __func__, extra);
+		set_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat);
+	} else {
+		pr_debug("%s: ESSID any\n", __func__);
+		clear_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat);
+	}
+	set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat);
+	spin_unlock_irqrestore(&wl->lock, irqflag);
+
+
+	gelic_wl_try_associate(netdev); /* FIXME */
+	pr_debug("%s: ->\n", __func__);
+	return 0;
+}
+
+static int gelic_wl_get_essid(struct net_device *netdev,
+			      struct iw_request_info *info,
+			      union iwreq_data *data, char *extra)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	unsigned long irqflag;
+
+	pr_debug("%s: <-\n", __func__);
+	mutex_lock(&wl->assoc_stat_lock);
+	spin_lock_irqsave(&wl->lock, irqflag);
+	if (test_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat) ||
+	    wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) {
+		memcpy(extra, wl->essid, wl->essid_len);
+		data->essid.length = wl->essid_len;
+		data->essid.flags = 1;
+	} else
+		data->essid.flags = 0;
+
+	mutex_unlock(&wl->assoc_stat_lock);
+	spin_unlock_irqrestore(&wl->lock, irqflag);
+	pr_debug("%s: -> len=%d\n", __func__, data->essid.length);
+
+	return 0;
+}
+
+/* SIO{S,G}IWENCODE */
+static int gelic_wl_set_encode(struct net_device *netdev,
+			       struct iw_request_info *info,
+			       union iwreq_data *data, char *extra)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	struct iw_point *enc = &data->encoding;
+	__u16 flags;
+	unsigned long irqflag;
+	int key_index, index_specified;
+	int ret = 0;
+
+	pr_debug("%s: <-\n", __func__);
+	flags = enc->flags & IW_ENCODE_FLAGS;
+	key_index = enc->flags & IW_ENCODE_INDEX;
+
+	pr_debug("%s: key_index = %d\n", __func__, key_index);
+	pr_debug("%s: key_len = %d\n", __func__, enc->length);
+	pr_debug("%s: flag=%x\n", __func__, enc->flags & IW_ENCODE_FLAGS);
+
+	if (GELIC_WEP_KEYS < key_index)
+		return -EINVAL;
+
+	spin_lock_irqsave(&wl->lock, irqflag);
+	if (key_index) {
+		index_specified = 1;
+		key_index--;
+	} else {
+		index_specified = 0;
+		key_index = wl->current_key;
+	}
+
+	if (flags & IW_ENCODE_NOKEY) {
+		/* if just IW_ENCODE_NOKEY, change current key index */
+		if (!flags && index_specified) {
+			wl->current_key = key_index;
+			goto done;
+		}
+
+		if (flags & IW_ENCODE_DISABLED) {
+			if (!index_specified) {
+				/* disable encryption */
+				wl->group_cipher_method = GELIC_WL_CIPHER_NONE;
+				wl->pairwise_cipher_method =
+					GELIC_WL_CIPHER_NONE;
+				/* invalidate all key */
+				wl->key_enabled = 0;
+			} else
+				clear_bit(key_index, &wl->key_enabled);
+		}
+
+		if (flags & IW_ENCODE_OPEN)
+			wl->auth_method = GELIC_EURUS_AUTH_OPEN;
+		if (flags & IW_ENCODE_RESTRICTED) {
+			pr_info("%s: shared key mode enabled\n", __func__);
+			wl->auth_method = GELIC_EURUS_AUTH_SHARED;
+		}
+	} else {
+		if (IW_ENCODING_TOKEN_MAX < enc->length) {
+			ret = -EINVAL;
+			goto done;
+		}
+		wl->key_len[key_index] = enc->length;
+		memcpy(wl->key[key_index], extra, enc->length);
+		set_bit(key_index, &wl->key_enabled);
+		wl->pairwise_cipher_method = GELIC_WL_CIPHER_WEP;
+		wl->group_cipher_method = GELIC_WL_CIPHER_WEP;
+	}
+	set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat);
+done:
+	spin_unlock_irqrestore(&wl->lock, irqflag);
+	pr_debug("%s: ->\n", __func__);
+	return ret;
+}
+
+static int gelic_wl_get_encode(struct net_device *netdev,
+			       struct iw_request_info *info,
+			       union iwreq_data *data, char *extra)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	struct iw_point *enc = &data->encoding;
+	unsigned long irqflag;
+	unsigned int key_index, index_specified;
+	int ret = 0;
+
+	pr_debug("%s: <-\n", __func__);
+	key_index = enc->flags & IW_ENCODE_INDEX;
+	pr_debug("%s: flag=%#x point=%p len=%d extra=%p\n", __func__,
+		 enc->flags, enc->pointer, enc->length, extra);
+	if (GELIC_WEP_KEYS < key_index)
+		return -EINVAL;
+
+	spin_lock_irqsave(&wl->lock, irqflag);
+	if (key_index) {
+		index_specified = 1;
+		key_index--;
+	} else {
+		index_specified = 0;
+		key_index = wl->current_key;
+	}
+
+	if (wl->group_cipher_method == GELIC_WL_CIPHER_WEP) {
+		switch (wl->auth_method) {
+		case GELIC_EURUS_AUTH_OPEN:
+			enc->flags = IW_ENCODE_OPEN;
+			break;
+		case GELIC_EURUS_AUTH_SHARED:
+			enc->flags = IW_ENCODE_RESTRICTED;
+			break;
+		}
+	} else
+		enc->flags = IW_ENCODE_DISABLED;
+
+	if (test_bit(key_index, &wl->key_enabled)) {
+		if (enc->length < wl->key_len[key_index]) {
+			ret = -EINVAL;
+			goto done;
+		}
+		enc->length = wl->key_len[key_index];
+		memcpy(extra, wl->key[key_index], wl->key_len[key_index]);
+	} else {
+		enc->length = 0;
+		enc->flags |= IW_ENCODE_NOKEY;
+	}
+	enc->flags |= key_index + 1;
+	pr_debug("%s: -> flag=%x len=%d\n", __func__,
+		 enc->flags, enc->length);
+
+done:
+	spin_unlock_irqrestore(&wl->lock, irqflag);
+	return ret;
+}
+
+/* SIOC{S,G}IWAP */
+static int gelic_wl_set_ap(struct net_device *netdev,
+			   struct iw_request_info *info,
+			   union iwreq_data *data, char *extra)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	unsigned long irqflag;
+
+	pr_debug("%s: <-\n", __func__);
+	if (data->ap_addr.sa_family != ARPHRD_ETHER)
+		return -EINVAL;
+
+	spin_lock_irqsave(&wl->lock, irqflag);
+	if (is_valid_ether_addr(data->ap_addr.sa_data)) {
+		memcpy(wl->bssid, data->ap_addr.sa_data,
+		       ETH_ALEN);
+		set_bit(GELIC_WL_STAT_BSSID_SET, &wl->stat);
+		set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat);
+		pr_debug("%s: bss=%pM\n", __func__, wl->bssid);
+	} else {
+		pr_debug("%s: clear bssid\n", __func__);
+		clear_bit(GELIC_WL_STAT_BSSID_SET, &wl->stat);
+		eth_zero_addr(wl->bssid);
+	}
+	spin_unlock_irqrestore(&wl->lock, irqflag);
+	pr_debug("%s: ->\n", __func__);
+	return 0;
+}
+
+static int gelic_wl_get_ap(struct net_device *netdev,
+			   struct iw_request_info *info,
+			   union iwreq_data *data, char *extra)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	unsigned long irqflag;
+
+	pr_debug("%s: <-\n", __func__);
+	mutex_lock(&wl->assoc_stat_lock);
+	spin_lock_irqsave(&wl->lock, irqflag);
+	if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) {
+		data->ap_addr.sa_family = ARPHRD_ETHER;
+		memcpy(data->ap_addr.sa_data, wl->active_bssid,
+		       ETH_ALEN);
+	} else
+		eth_zero_addr(data->ap_addr.sa_data);
+
+	spin_unlock_irqrestore(&wl->lock, irqflag);
+	mutex_unlock(&wl->assoc_stat_lock);
+	pr_debug("%s: ->\n", __func__);
+	return 0;
+}
+
+/* SIOC{S,G}IWENCODEEXT */
+static int gelic_wl_set_encodeext(struct net_device *netdev,
+				  struct iw_request_info *info,
+				  union iwreq_data *data, char *extra)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	struct iw_point *enc = &data->encoding;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	__u16 alg;
+	__u16 flags;
+	unsigned long irqflag;
+	int key_index;
+	int ret = 0;
+
+	pr_debug("%s: <-\n", __func__);
+	flags = enc->flags & IW_ENCODE_FLAGS;
+	alg = ext->alg;
+	key_index = enc->flags & IW_ENCODE_INDEX;
+
+	pr_debug("%s: key_index = %d\n", __func__, key_index);
+	pr_debug("%s: key_len = %d\n", __func__, enc->length);
+	pr_debug("%s: flag=%x\n", __func__, enc->flags & IW_ENCODE_FLAGS);
+	pr_debug("%s: ext_flag=%x\n", __func__, ext->ext_flags);
+	pr_debug("%s: ext_key_len=%x\n", __func__, ext->key_len);
+
+	if (GELIC_WEP_KEYS < key_index)
+		return -EINVAL;
+
+	spin_lock_irqsave(&wl->lock, irqflag);
+	if (key_index)
+		key_index--;
+	else
+		key_index = wl->current_key;
+
+	if (!enc->length && (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)) {
+		/* reques to change default key index */
+		pr_debug("%s: request to change default key to %d\n",
+			 __func__, key_index);
+		wl->current_key = key_index;
+		goto done;
+	}
+
+	if (alg == IW_ENCODE_ALG_NONE || (flags & IW_ENCODE_DISABLED)) {
+		pr_debug("%s: alg disabled\n", __func__);
+		wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE;
+		wl->group_cipher_method = GELIC_WL_CIPHER_NONE;
+		wl->pairwise_cipher_method = GELIC_WL_CIPHER_NONE;
+		wl->auth_method = GELIC_EURUS_AUTH_OPEN; /* should be open */
+	} else if (alg == IW_ENCODE_ALG_WEP) {
+		pr_debug("%s: WEP requested\n", __func__);
+		if (flags & IW_ENCODE_OPEN) {
+			pr_debug("%s: open key mode\n", __func__);
+			wl->auth_method = GELIC_EURUS_AUTH_OPEN;
+		}
+		if (flags & IW_ENCODE_RESTRICTED) {
+			pr_debug("%s: shared key mode\n", __func__);
+			wl->auth_method = GELIC_EURUS_AUTH_SHARED;
+		}
+		if (IW_ENCODING_TOKEN_MAX < ext->key_len) {
+			pr_info("%s: key is too long %d\n", __func__,
+				ext->key_len);
+			ret = -EINVAL;
+			goto done;
+		}
+		/* OK, update the key */
+		wl->key_len[key_index] = ext->key_len;
+		memset(wl->key[key_index], 0, IW_ENCODING_TOKEN_MAX);
+		memcpy(wl->key[key_index], ext->key, ext->key_len);
+		set_bit(key_index, &wl->key_enabled);
+		/* remember wep info changed */
+		set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat);
+	} else if (alg == IW_ENCODE_ALG_PMK) {
+		if (ext->key_len != WPA_PSK_LEN) {
+			pr_err("%s: PSK length wrong %d\n", __func__,
+			       ext->key_len);
+			ret = -EINVAL;
+			goto done;
+		}
+		memset(wl->psk, 0, sizeof(wl->psk));
+		memcpy(wl->psk, ext->key, ext->key_len);
+		wl->psk_len = ext->key_len;
+		wl->psk_type = GELIC_EURUS_WPA_PSK_BIN;
+		/* remember PSK configured */
+		set_bit(GELIC_WL_STAT_WPA_PSK_SET, &wl->stat);
+	}
+done:
+	spin_unlock_irqrestore(&wl->lock, irqflag);
+	pr_debug("%s: ->\n", __func__);
+	return ret;
+}
+
+static int gelic_wl_get_encodeext(struct net_device *netdev,
+				  struct iw_request_info *info,
+				  union iwreq_data *data, char *extra)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	struct iw_point *enc = &data->encoding;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	unsigned long irqflag;
+	int key_index;
+	int ret = 0;
+	int max_key_len;
+
+	pr_debug("%s: <-\n", __func__);
+
+	max_key_len = enc->length - sizeof(struct iw_encode_ext);
+	if (max_key_len < 0)
+		return -EINVAL;
+	key_index = enc->flags & IW_ENCODE_INDEX;
+
+	pr_debug("%s: key_index = %d\n", __func__, key_index);
+	pr_debug("%s: key_len = %d\n", __func__, enc->length);
+	pr_debug("%s: flag=%x\n", __func__, enc->flags & IW_ENCODE_FLAGS);
+
+	if (GELIC_WEP_KEYS < key_index)
+		return -EINVAL;
+
+	spin_lock_irqsave(&wl->lock, irqflag);
+	if (key_index)
+		key_index--;
+	else
+		key_index = wl->current_key;
+
+	memset(ext, 0, sizeof(struct iw_encode_ext));
+	switch (wl->group_cipher_method) {
+	case GELIC_WL_CIPHER_WEP:
+		ext->alg = IW_ENCODE_ALG_WEP;
+		enc->flags |= IW_ENCODE_ENABLED;
+		break;
+	case GELIC_WL_CIPHER_TKIP:
+		ext->alg = IW_ENCODE_ALG_TKIP;
+		enc->flags |= IW_ENCODE_ENABLED;
+		break;
+	case GELIC_WL_CIPHER_AES:
+		ext->alg = IW_ENCODE_ALG_CCMP;
+		enc->flags |= IW_ENCODE_ENABLED;
+		break;
+	case GELIC_WL_CIPHER_NONE:
+	default:
+		ext->alg = IW_ENCODE_ALG_NONE;
+		enc->flags |= IW_ENCODE_NOKEY;
+		break;
+	}
+
+	if (!(enc->flags & IW_ENCODE_NOKEY)) {
+		if (max_key_len < wl->key_len[key_index]) {
+			ret = -E2BIG;
+			goto out;
+		}
+		if (test_bit(key_index, &wl->key_enabled))
+			memcpy(ext->key, wl->key[key_index],
+			       wl->key_len[key_index]);
+		else
+			pr_debug("%s: disabled key requested ix=%d\n",
+				 __func__, key_index);
+	}
+out:
+	spin_unlock_irqrestore(&wl->lock, irqflag);
+	pr_debug("%s: ->\n", __func__);
+	return ret;
+}
+/* SIOC{S,G}IWMODE */
+static int gelic_wl_set_mode(struct net_device *netdev,
+			     struct iw_request_info *info,
+			     union iwreq_data *data, char *extra)
+{
+	__u32 mode = data->mode;
+	int ret;
+
+	pr_debug("%s: <-\n", __func__);
+	if (mode == IW_MODE_INFRA)
+		ret = 0;
+	else
+		ret = -EOPNOTSUPP;
+	pr_debug("%s: -> %d\n", __func__, ret);
+	return ret;
+}
+
+static int gelic_wl_get_mode(struct net_device *netdev,
+			     struct iw_request_info *info,
+			     union iwreq_data *data, char *extra)
+{
+	__u32 *mode = &data->mode;
+	pr_debug("%s: <-\n", __func__);
+	*mode = IW_MODE_INFRA;
+	pr_debug("%s: ->\n", __func__);
+	return 0;
+}
+
+/* SIOCGIWNICKN */
+static int gelic_wl_get_nick(struct net_device *net_dev,
+				  struct iw_request_info *info,
+				  union iwreq_data *data, char *extra)
+{
+	strcpy(extra, "gelic_wl");
+	data->data.length = strlen(extra);
+	data->data.flags = 1;
+	return 0;
+}
+
+
+/* --- */
+
+static struct iw_statistics *gelic_wl_get_wireless_stats(
+	struct net_device *netdev)
+{
+
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	struct gelic_eurus_cmd *cmd;
+	struct iw_statistics *is;
+	struct gelic_eurus_rssi_info *rssi;
+	void *buf;
+
+	pr_debug("%s: <-\n", __func__);
+
+	buf = (void *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return NULL;
+
+	is = &wl->iwstat;
+	memset(is, 0, sizeof(*is));
+	cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_GET_RSSI_CFG,
+				   buf, sizeof(*rssi));
+	if (cmd && !cmd->status && !cmd->cmd_status) {
+		rssi = buf;
+		is->qual.level = be16_to_cpu(rssi->rssi);
+		is->qual.updated = IW_QUAL_LEVEL_UPDATED |
+			IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID;
+	} else
+		/* not associated */
+		is->qual.updated = IW_QUAL_ALL_INVALID;
+
+	kfree(cmd);
+	free_page((unsigned long)buf);
+	pr_debug("%s: ->\n", __func__);
+	return is;
+}
+
+/*
+ *  scanning helpers
+ */
+static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan,
+			       u8 *essid, size_t essid_len)
+{
+	struct gelic_eurus_cmd *cmd;
+	int ret = 0;
+	void *buf = NULL;
+	size_t len;
+
+	pr_debug("%s: <- always=%d\n", __func__, always_scan);
+	if (mutex_lock_interruptible(&wl->scan_lock))
+		return -ERESTARTSYS;
+
+	/*
+	 * If already a scan in progress, do not trigger more
+	 */
+	if (wl->scan_stat == GELIC_WL_SCAN_STAT_SCANNING) {
+		pr_debug("%s: scanning now\n", __func__);
+		goto out;
+	}
+
+	init_completion(&wl->scan_done);
+	/*
+	 * If we have already a bss list, don't try to get new
+	 * unless we are doing an ESSID scan
+	 */
+	if ((!essid_len && !always_scan)
+	    && wl->scan_stat == GELIC_WL_SCAN_STAT_GOT_LIST) {
+		pr_debug("%s: already has the list\n", __func__);
+		complete(&wl->scan_done);
+		goto out;
+	}
+
+	/* ESSID scan ? */
+	if (essid_len && essid) {
+		buf = (void *)__get_free_page(GFP_KERNEL);
+		if (!buf) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		len = IW_ESSID_MAX_SIZE; /* hypervisor always requires 32 */
+		memset(buf, 0, len);
+		memcpy(buf, essid, essid_len);
+		pr_debug("%s: essid scan='%s'\n", __func__, (char *)buf);
+	} else
+		len = 0;
+
+	/*
+	 * issue start scan request
+	 */
+	wl->scan_stat = GELIC_WL_SCAN_STAT_SCANNING;
+	cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_START_SCAN,
+				   buf, len);
+	if (!cmd || cmd->status || cmd->cmd_status) {
+		wl->scan_stat = GELIC_WL_SCAN_STAT_INIT;
+		complete(&wl->scan_done);
+		ret = -ENOMEM;
+		goto out;
+	}
+	kfree(cmd);
+out:
+	free_page((unsigned long)buf);
+	mutex_unlock(&wl->scan_lock);
+	pr_debug("%s: ->\n", __func__);
+	return ret;
+}
+
+/*
+ * retrieve scan result from the chip (hypervisor)
+ * this function is invoked by schedule work.
+ */
+static void gelic_wl_scan_complete_event(struct gelic_wl_info *wl)
+{
+	struct gelic_eurus_cmd *cmd = NULL;
+	struct gelic_wl_scan_info *target, *tmp;
+	struct gelic_wl_scan_info *oldest = NULL;
+	struct gelic_eurus_scan_info *scan_info;
+	unsigned int scan_info_size;
+	union iwreq_data data;
+	unsigned long this_time = jiffies;
+	unsigned int data_len, i, found, r;
+	void *buf;
+
+	pr_debug("%s:start\n", __func__);
+	mutex_lock(&wl->scan_lock);
+
+	buf = (void *)__get_free_page(GFP_KERNEL);
+	if (!buf) {
+		pr_info("%s: scan buffer alloc failed\n", __func__);
+		goto out;
+	}
+
+	if (wl->scan_stat != GELIC_WL_SCAN_STAT_SCANNING) {
+		/*
+		 * stop() may be called while scanning, ignore result
+		 */
+		pr_debug("%s: scan complete when stat != scanning(%d)\n",
+			 __func__, wl->scan_stat);
+		goto out;
+	}
+
+	cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_GET_SCAN,
+				   buf, PAGE_SIZE);
+	if (!cmd || cmd->status || cmd->cmd_status) {
+		wl->scan_stat = GELIC_WL_SCAN_STAT_INIT;
+		pr_info("%s:cmd failed\n", __func__);
+		kfree(cmd);
+		goto out;
+	}
+	data_len = cmd->size;
+	pr_debug("%s: data_len = %d\n", __func__, data_len);
+	kfree(cmd);
+
+	/* OK, bss list retrieved */
+	wl->scan_stat = GELIC_WL_SCAN_STAT_GOT_LIST;
+
+	/* mark all entries are old */
+	list_for_each_entry_safe(target, tmp, &wl->network_list, list) {
+		target->valid = 0;
+		/* expire too old entries */
+		if (time_before(target->last_scanned + wl->scan_age,
+				this_time)) {
+			kfree(target->hwinfo);
+			target->hwinfo = NULL;
+			list_move_tail(&target->list, &wl->network_free_list);
+		}
+	}
+
+	/* put them in the network_list */
+	for (i = 0, scan_info_size = 0, scan_info = buf;
+	     scan_info_size < data_len;
+	     i++, scan_info_size += be16_to_cpu(scan_info->size),
+	     scan_info = (void *)scan_info + be16_to_cpu(scan_info->size)) {
+		pr_debug("%s:size=%d bssid=%pM scan_info=%p\n", __func__,
+			 be16_to_cpu(scan_info->size),
+			 &scan_info->bssid[2], scan_info);
+
+		/*
+		 * The wireless firmware may return invalid channel 0 and/or
+		 * invalid rate if the AP emits zero length SSID ie. As this
+		 * scan information is useless, ignore it
+		 */
+		if (!be16_to_cpu(scan_info->channel) || !scan_info->rate[0]) {
+			pr_debug("%s: invalid scan info\n", __func__);
+			continue;
+		}
+
+		found = 0;
+		oldest = NULL;
+		list_for_each_entry(target, &wl->network_list, list) {
+			if (ether_addr_equal(&target->hwinfo->bssid[2],
+					     &scan_info->bssid[2])) {
+				found = 1;
+				pr_debug("%s: same BBS found scanned list\n",
+					 __func__);
+				break;
+			}
+			if (!oldest ||
+			    (target->last_scanned < oldest->last_scanned))
+				oldest = target;
+		}
+
+		if (!found) {
+			/* not found in the list */
+			if (list_empty(&wl->network_free_list)) {
+				/* expire oldest */
+				target = oldest;
+			} else {
+				target = list_entry(wl->network_free_list.next,
+						    struct gelic_wl_scan_info,
+						    list);
+			}
+		}
+
+		/* update the item */
+		target->last_scanned = this_time;
+		target->valid = 1;
+		target->eurus_index = i;
+		kfree(target->hwinfo);
+		target->hwinfo = kmemdup(scan_info,
+					 be16_to_cpu(scan_info->size),
+					 GFP_KERNEL);
+		if (!target->hwinfo)
+			continue;
+
+		/* copy hw scan info */
+		target->essid_len = strnlen(scan_info->essid,
+					    sizeof(scan_info->essid));
+		target->rate_len = 0;
+		for (r = 0; r < 12; r++)
+			if (scan_info->rate[r])
+				target->rate_len++;
+		if (8 < target->rate_len)
+			pr_info("%s: AP returns %d rates\n", __func__,
+				target->rate_len);
+		target->rate_ext_len = 0;
+		for (r = 0; r < 16; r++)
+			if (scan_info->ext_rate[r])
+				target->rate_ext_len++;
+		list_move_tail(&target->list, &wl->network_list);
+	}
+	memset(&data, 0, sizeof(data));
+	wireless_send_event(port_to_netdev(wl_port(wl)), SIOCGIWSCAN, &data,
+			    NULL);
+out:
+	free_page((unsigned long)buf);
+	complete(&wl->scan_done);
+	mutex_unlock(&wl->scan_lock);
+	pr_debug("%s:end\n", __func__);
+}
+
+/*
+ * Select an appropriate bss from current scan list regarding
+ * current settings from userspace.
+ * The caller must hold wl->scan_lock,
+ * and on the state of wl->scan_state == GELIC_WL_SCAN_GOT_LIST
+ */
+static void update_best(struct gelic_wl_scan_info **best,
+			struct gelic_wl_scan_info *candid,
+			int *best_weight,
+			int *weight)
+{
+	if (*best_weight < ++(*weight)) {
+		*best_weight = *weight;
+		*best = candid;
+	}
+}
+
+static
+struct gelic_wl_scan_info *gelic_wl_find_best_bss(struct gelic_wl_info *wl)
+{
+	struct gelic_wl_scan_info *scan_info;
+	struct gelic_wl_scan_info *best_bss;
+	int weight, best_weight;
+	u16 security;
+
+	pr_debug("%s: <-\n", __func__);
+
+	best_bss = NULL;
+	best_weight = 0;
+
+	list_for_each_entry(scan_info, &wl->network_list, list) {
+		pr_debug("%s: station %p\n", __func__, scan_info);
+
+		if (!scan_info->valid) {
+			pr_debug("%s: station invalid\n", __func__);
+			continue;
+		}
+
+		/* If bss specified, check it only */
+		if (test_bit(GELIC_WL_STAT_BSSID_SET, &wl->stat)) {
+			if (ether_addr_equal(&scan_info->hwinfo->bssid[2],
+					     wl->bssid)) {
+				best_bss = scan_info;
+				pr_debug("%s: bssid matched\n", __func__);
+				break;
+			} else {
+				pr_debug("%s: bssid unmatched\n", __func__);
+				continue;
+			}
+		}
+
+		weight = 0;
+
+		/* security */
+		security = be16_to_cpu(scan_info->hwinfo->security) &
+			GELIC_EURUS_SCAN_SEC_MASK;
+		if (wl->wpa_level == GELIC_WL_WPA_LEVEL_WPA2) {
+			if (security == GELIC_EURUS_SCAN_SEC_WPA2)
+				update_best(&best_bss, scan_info,
+					    &best_weight, &weight);
+			else
+				continue;
+		} else if (wl->wpa_level == GELIC_WL_WPA_LEVEL_WPA) {
+			if (security == GELIC_EURUS_SCAN_SEC_WPA)
+				update_best(&best_bss, scan_info,
+					    &best_weight, &weight);
+			else
+				continue;
+		} else if (wl->wpa_level == GELIC_WL_WPA_LEVEL_NONE &&
+			   wl->group_cipher_method == GELIC_WL_CIPHER_WEP) {
+			if (security == GELIC_EURUS_SCAN_SEC_WEP)
+				update_best(&best_bss, scan_info,
+					    &best_weight, &weight);
+			else
+				continue;
+		}
+
+		/* If ESSID is set, check it */
+		if (test_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat)) {
+			if ((scan_info->essid_len == wl->essid_len) &&
+			    !strncmp(wl->essid,
+				     scan_info->hwinfo->essid,
+				     scan_info->essid_len))
+				update_best(&best_bss, scan_info,
+					    &best_weight, &weight);
+			else
+				continue;
+		}
+	}
+
+#ifdef DEBUG
+	pr_debug("%s: -> bss=%p\n", __func__, best_bss);
+	if (best_bss) {
+		pr_debug("%s:addr=%pM\n", __func__,
+			 &best_bss->hwinfo->bssid[2]);
+	}
+#endif
+	return best_bss;
+}
+
+/*
+ * Setup WEP configuration to the chip
+ * The caller must hold wl->scan_lock,
+ * and on the state of wl->scan_state == GELIC_WL_SCAN_GOT_LIST
+ */
+static int gelic_wl_do_wep_setup(struct gelic_wl_info *wl)
+{
+	unsigned int i;
+	struct gelic_eurus_wep_cfg *wep;
+	struct gelic_eurus_cmd *cmd;
+	int wep104 = 0;
+	int have_key = 0;
+	int ret = 0;
+
+	pr_debug("%s: <-\n", __func__);
+	/* we can assume no one should uses the buffer */
+	wep = (struct gelic_eurus_wep_cfg *)__get_free_page(GFP_KERNEL);
+	if (!wep)
+		return -ENOMEM;
+
+	memset(wep, 0, sizeof(*wep));
+
+	if (wl->group_cipher_method == GELIC_WL_CIPHER_WEP) {
+		pr_debug("%s: WEP mode\n", __func__);
+		for (i = 0; i < GELIC_WEP_KEYS; i++) {
+			if (!test_bit(i, &wl->key_enabled))
+				continue;
+
+			pr_debug("%s: key#%d enabled\n", __func__, i);
+			have_key = 1;
+			if (wl->key_len[i] == 13)
+				wep104 = 1;
+			else if (wl->key_len[i] != 5) {
+				pr_info("%s: wrong wep key[%d]=%d\n",
+					__func__, i, wl->key_len[i]);
+				ret = -EINVAL;
+				goto out;
+			}
+			memcpy(wep->key[i], wl->key[i], wl->key_len[i]);
+		}
+
+		if (!have_key) {
+			pr_info("%s: all wep key disabled\n", __func__);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (wep104) {
+			pr_debug("%s: 104bit key\n", __func__);
+			wep->security = cpu_to_be16(GELIC_EURUS_WEP_SEC_104BIT);
+		} else {
+			pr_debug("%s: 40bit key\n", __func__);
+			wep->security = cpu_to_be16(GELIC_EURUS_WEP_SEC_40BIT);
+		}
+	} else {
+		pr_debug("%s: NO encryption\n", __func__);
+		wep->security = cpu_to_be16(GELIC_EURUS_WEP_SEC_NONE);
+	}
+
+	/* issue wep setup */
+	cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_SET_WEP_CFG,
+				   wep, sizeof(*wep));
+	if (!cmd)
+		ret = -ENOMEM;
+	else if (cmd->status || cmd->cmd_status)
+		ret = -ENXIO;
+
+	kfree(cmd);
+out:
+	free_page((unsigned long)wep);
+	pr_debug("%s: ->\n", __func__);
+	return ret;
+}
+
+#ifdef DEBUG
+static const char *wpasecstr(enum gelic_eurus_wpa_security sec)
+{
+	switch (sec) {
+	case GELIC_EURUS_WPA_SEC_NONE:
+		return "NONE";
+	case GELIC_EURUS_WPA_SEC_WPA_TKIP_TKIP:
+		return "WPA_TKIP_TKIP";
+	case GELIC_EURUS_WPA_SEC_WPA_TKIP_AES:
+		return "WPA_TKIP_AES";
+	case GELIC_EURUS_WPA_SEC_WPA_AES_AES:
+		return "WPA_AES_AES";
+	case GELIC_EURUS_WPA_SEC_WPA2_TKIP_TKIP:
+		return "WPA2_TKIP_TKIP";
+	case GELIC_EURUS_WPA_SEC_WPA2_TKIP_AES:
+		return "WPA2_TKIP_AES";
+	case GELIC_EURUS_WPA_SEC_WPA2_AES_AES:
+		return "WPA2_AES_AES";
+	}
+	return "";
+};
+#endif
+
+static int gelic_wl_do_wpa_setup(struct gelic_wl_info *wl)
+{
+	struct gelic_eurus_wpa_cfg *wpa;
+	struct gelic_eurus_cmd *cmd;
+	u16 security;
+	int ret = 0;
+
+	pr_debug("%s: <-\n", __func__);
+	/* we can assume no one should uses the buffer */
+	wpa = (struct gelic_eurus_wpa_cfg *)__get_free_page(GFP_KERNEL);
+	if (!wpa)
+		return -ENOMEM;
+
+	memset(wpa, 0, sizeof(*wpa));
+
+	if (!test_bit(GELIC_WL_STAT_WPA_PSK_SET, &wl->stat))
+		pr_info("%s: PSK not configured yet\n", __func__);
+
+	/* copy key */
+	memcpy(wpa->psk, wl->psk, wl->psk_len);
+
+	/* set security level */
+	if (wl->wpa_level == GELIC_WL_WPA_LEVEL_WPA2) {
+		if (wl->group_cipher_method == GELIC_WL_CIPHER_AES) {
+			security = GELIC_EURUS_WPA_SEC_WPA2_AES_AES;
+		} else {
+			if (wl->pairwise_cipher_method == GELIC_WL_CIPHER_AES &&
+			    precise_ie())
+				security = GELIC_EURUS_WPA_SEC_WPA2_TKIP_AES;
+			else
+				security = GELIC_EURUS_WPA_SEC_WPA2_TKIP_TKIP;
+		}
+	} else {
+		if (wl->group_cipher_method == GELIC_WL_CIPHER_AES) {
+			security = GELIC_EURUS_WPA_SEC_WPA_AES_AES;
+		} else {
+			if (wl->pairwise_cipher_method == GELIC_WL_CIPHER_AES &&
+			    precise_ie())
+				security = GELIC_EURUS_WPA_SEC_WPA_TKIP_AES;
+			else
+				security = GELIC_EURUS_WPA_SEC_WPA_TKIP_TKIP;
+		}
+	}
+	wpa->security = cpu_to_be16(security);
+
+	/* PSK type */
+	wpa->psk_type = cpu_to_be16(wl->psk_type);
+#ifdef DEBUG
+	pr_debug("%s: sec=%s psktype=%s\n", __func__,
+		 wpasecstr(wpa->security),
+		 (wpa->psk_type == GELIC_EURUS_WPA_PSK_BIN) ?
+		 "BIN" : "passphrase");
+#if 0
+	/*
+	 * don't enable here if you plan to submit
+	 * the debug log because this dumps your precious
+	 * passphrase/key.
+	 */
+	pr_debug("%s: psk=%s\n", __func__,
+		 (wpa->psk_type == GELIC_EURUS_WPA_PSK_BIN) ?
+		 "N/A" : wpa->psk);
+#endif
+#endif
+	/* issue wpa setup */
+	cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_SET_WPA_CFG,
+				   wpa, sizeof(*wpa));
+	if (!cmd)
+		ret = -ENOMEM;
+	else if (cmd->status || cmd->cmd_status)
+		ret = -ENXIO;
+	kfree(cmd);
+	free_page((unsigned long)wpa);
+	pr_debug("%s: --> %d\n", __func__, ret);
+	return ret;
+}
+
+/*
+ * Start association. caller must hold assoc_stat_lock
+ */
+static int gelic_wl_associate_bss(struct gelic_wl_info *wl,
+				  struct gelic_wl_scan_info *bss)
+{
+	struct gelic_eurus_cmd *cmd;
+	struct gelic_eurus_common_cfg *common;
+	int ret = 0;
+	unsigned long rc;
+
+	pr_debug("%s: <-\n", __func__);
+
+	/* do common config */
+	common = (struct gelic_eurus_common_cfg *)__get_free_page(GFP_KERNEL);
+	if (!common)
+		return -ENOMEM;
+
+	memset(common, 0, sizeof(*common));
+	common->bss_type = cpu_to_be16(GELIC_EURUS_BSS_INFRA);
+	common->op_mode = cpu_to_be16(GELIC_EURUS_OPMODE_11BG);
+
+	common->scan_index = cpu_to_be16(bss->eurus_index);
+	switch (wl->auth_method) {
+	case GELIC_EURUS_AUTH_OPEN:
+		common->auth_method = cpu_to_be16(GELIC_EURUS_AUTH_OPEN);
+		break;
+	case GELIC_EURUS_AUTH_SHARED:
+		common->auth_method = cpu_to_be16(GELIC_EURUS_AUTH_SHARED);
+		break;
+	}
+
+#ifdef DEBUG
+	scan_list_dump(wl);
+#endif
+	pr_debug("%s: common cfg index=%d bsstype=%d auth=%d\n", __func__,
+		 be16_to_cpu(common->scan_index),
+		 be16_to_cpu(common->bss_type),
+		 be16_to_cpu(common->auth_method));
+
+	cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_SET_COMMON_CFG,
+				   common, sizeof(*common));
+	if (!cmd || cmd->status || cmd->cmd_status) {
+		ret = -ENOMEM;
+		kfree(cmd);
+		goto out;
+	}
+	kfree(cmd);
+
+	/* WEP/WPA */
+	switch (wl->wpa_level) {
+	case GELIC_WL_WPA_LEVEL_NONE:
+		/* If WEP or no security, setup WEP config */
+		ret = gelic_wl_do_wep_setup(wl);
+		break;
+	case GELIC_WL_WPA_LEVEL_WPA:
+	case GELIC_WL_WPA_LEVEL_WPA2:
+		ret = gelic_wl_do_wpa_setup(wl);
+		break;
+	}
+
+	if (ret) {
+		pr_debug("%s: WEP/WPA setup failed %d\n", __func__,
+			 ret);
+		ret = -EPERM;
+		gelic_wl_send_iwap_event(wl, NULL);
+		goto out;
+	}
+
+	/* start association */
+	init_completion(&wl->assoc_done);
+	wl->assoc_stat = GELIC_WL_ASSOC_STAT_ASSOCIATING;
+	cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_ASSOC,
+				   NULL, 0);
+	if (!cmd || cmd->status || cmd->cmd_status) {
+		pr_debug("%s: assoc request failed\n", __func__);
+		wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN;
+		kfree(cmd);
+		ret = -ENOMEM;
+		gelic_wl_send_iwap_event(wl, NULL);
+		goto out;
+	}
+	kfree(cmd);
+
+	/* wait for connected event */
+	rc = wait_for_completion_timeout(&wl->assoc_done, HZ * 4);/*FIXME*/
+
+	if (!rc) {
+		/* timeouted.  Maybe key or cyrpt mode is wrong */
+		pr_info("%s: connect timeout\n", __func__);
+		cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_DISASSOC,
+					   NULL, 0);
+		kfree(cmd);
+		wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN;
+		gelic_wl_send_iwap_event(wl, NULL);
+		ret = -ENXIO;
+	} else {
+		wl->assoc_stat = GELIC_WL_ASSOC_STAT_ASSOCIATED;
+		/* copy bssid */
+		memcpy(wl->active_bssid, &bss->hwinfo->bssid[2], ETH_ALEN);
+
+		/* send connect event */
+		gelic_wl_send_iwap_event(wl, wl->active_bssid);
+		pr_info("%s: connected\n", __func__);
+	}
+out:
+	free_page((unsigned long)common);
+	pr_debug("%s: ->\n", __func__);
+	return ret;
+}
+
+/*
+ * connected event
+ */
+static void gelic_wl_connected_event(struct gelic_wl_info *wl,
+				     u64 event)
+{
+	u64 desired_event = 0;
+
+	switch (wl->wpa_level) {
+	case GELIC_WL_WPA_LEVEL_NONE:
+		desired_event = GELIC_LV1_WL_EVENT_CONNECTED;
+		break;
+	case GELIC_WL_WPA_LEVEL_WPA:
+	case GELIC_WL_WPA_LEVEL_WPA2:
+		desired_event = GELIC_LV1_WL_EVENT_WPA_CONNECTED;
+		break;
+	}
+
+	if (desired_event == event) {
+		pr_debug("%s: completed\n", __func__);
+		complete(&wl->assoc_done);
+		netif_carrier_on(port_to_netdev(wl_port(wl)));
+	} else
+		pr_debug("%s: event %#llx under wpa\n",
+				 __func__, event);
+}
+
+/*
+ * disconnect event
+ */
+static void gelic_wl_disconnect_event(struct gelic_wl_info *wl,
+				      u64 event)
+{
+	struct gelic_eurus_cmd *cmd;
+	int lock;
+
+	/*
+	 * If we fall here in the middle of association,
+	 * associate_bss() should be waiting for complation of
+	 * wl->assoc_done.
+	 * As it waits with timeout, just leave assoc_done
+	 * uncompleted, then it terminates with timeout
+	 */
+	if (!mutex_trylock(&wl->assoc_stat_lock)) {
+		pr_debug("%s: already locked\n", __func__);
+		lock = 0;
+	} else {
+		pr_debug("%s: obtain lock\n", __func__);
+		lock = 1;
+	}
+
+	cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_DISASSOC, NULL, 0);
+	kfree(cmd);
+
+	/* send disconnected event to the supplicant */
+	if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED)
+		gelic_wl_send_iwap_event(wl, NULL);
+
+	wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN;
+	netif_carrier_off(port_to_netdev(wl_port(wl)));
+
+	if (lock)
+		mutex_unlock(&wl->assoc_stat_lock);
+}
+/*
+ * event worker
+ */
+#ifdef DEBUG
+static const char *eventstr(enum gelic_lv1_wl_event event)
+{
+	static char buf[32];
+	char *ret;
+	if (event & GELIC_LV1_WL_EVENT_DEVICE_READY)
+		ret = "EURUS_READY";
+	else if (event & GELIC_LV1_WL_EVENT_SCAN_COMPLETED)
+		ret = "SCAN_COMPLETED";
+	else if (event & GELIC_LV1_WL_EVENT_DEAUTH)
+		ret = "DEAUTH";
+	else if (event & GELIC_LV1_WL_EVENT_BEACON_LOST)
+		ret = "BEACON_LOST";
+	else if (event & GELIC_LV1_WL_EVENT_CONNECTED)
+		ret = "CONNECTED";
+	else if (event & GELIC_LV1_WL_EVENT_WPA_CONNECTED)
+		ret = "WPA_CONNECTED";
+	else if (event & GELIC_LV1_WL_EVENT_WPA_ERROR)
+		ret = "WPA_ERROR";
+	else {
+		sprintf(buf, "Unknown(%#x)", event);
+		ret = buf;
+	}
+	return ret;
+}
+#else
+static const char *eventstr(enum gelic_lv1_wl_event event)
+{
+	return NULL;
+}
+#endif
+static void gelic_wl_event_worker(struct work_struct *work)
+{
+	struct gelic_wl_info *wl;
+	struct gelic_port *port;
+	u64 event, tmp;
+	int status;
+
+	pr_debug("%s:start\n", __func__);
+	wl = container_of(work, struct gelic_wl_info, event_work.work);
+	port = wl_port(wl);
+	while (1) {
+		status = lv1_net_control(bus_id(port->card), dev_id(port->card),
+					 GELIC_LV1_GET_WLAN_EVENT, 0, 0, 0,
+					 &event, &tmp);
+		if (status) {
+			if (status != LV1_NO_ENTRY)
+				pr_debug("%s:wlan event failed %d\n",
+					 __func__, status);
+			/* got all events */
+			pr_debug("%s:end\n", __func__);
+			return;
+		}
+		pr_debug("%s: event=%s\n", __func__, eventstr(event));
+		switch (event) {
+		case GELIC_LV1_WL_EVENT_SCAN_COMPLETED:
+			gelic_wl_scan_complete_event(wl);
+			break;
+		case GELIC_LV1_WL_EVENT_BEACON_LOST:
+		case GELIC_LV1_WL_EVENT_DEAUTH:
+			gelic_wl_disconnect_event(wl, event);
+			break;
+		case GELIC_LV1_WL_EVENT_CONNECTED:
+		case GELIC_LV1_WL_EVENT_WPA_CONNECTED:
+			gelic_wl_connected_event(wl, event);
+			break;
+		default:
+			break;
+		}
+	} /* while */
+}
+/*
+ * association worker
+ */
+static void gelic_wl_assoc_worker(struct work_struct *work)
+{
+	struct gelic_wl_info *wl;
+
+	struct gelic_wl_scan_info *best_bss;
+	int ret;
+	unsigned long irqflag;
+	u8 *essid;
+	size_t essid_len;
+
+	wl = container_of(work, struct gelic_wl_info, assoc_work.work);
+
+	mutex_lock(&wl->assoc_stat_lock);
+
+	if (wl->assoc_stat != GELIC_WL_ASSOC_STAT_DISCONN)
+		goto out;
+
+	spin_lock_irqsave(&wl->lock, irqflag);
+	if (test_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat)) {
+		pr_debug("%s: assoc ESSID configured %s\n", __func__,
+			 wl->essid);
+		essid = wl->essid;
+		essid_len = wl->essid_len;
+	} else {
+		essid = NULL;
+		essid_len = 0;
+	}
+	spin_unlock_irqrestore(&wl->lock, irqflag);
+
+	ret = gelic_wl_start_scan(wl, 0, essid, essid_len);
+	if (ret == -ERESTARTSYS) {
+		pr_debug("%s: scan start failed association\n", __func__);
+		schedule_delayed_work(&wl->assoc_work, HZ/10); /*FIXME*/
+		goto out;
+	} else if (ret) {
+		pr_info("%s: scan prerequisite failed\n", __func__);
+		goto out;
+	}
+
+	/*
+	 * Wait for bss scan completion
+	 * If we have scan list already, gelic_wl_start_scan()
+	 * returns OK and raises the complete.  Thus,
+	 * it's ok to wait unconditionally here
+	 */
+	wait_for_completion(&wl->scan_done);
+
+	pr_debug("%s: scan done\n", __func__);
+	mutex_lock(&wl->scan_lock);
+	if (wl->scan_stat != GELIC_WL_SCAN_STAT_GOT_LIST) {
+		gelic_wl_send_iwap_event(wl, NULL);
+		pr_info("%s: no scan list. association failed\n", __func__);
+		goto scan_lock_out;
+	}
+
+	/* find best matching bss */
+	best_bss = gelic_wl_find_best_bss(wl);
+	if (!best_bss) {
+		gelic_wl_send_iwap_event(wl, NULL);
+		pr_info("%s: no bss matched. association failed\n", __func__);
+		goto scan_lock_out;
+	}
+
+	/* ok, do association */
+	ret = gelic_wl_associate_bss(wl, best_bss);
+	if (ret)
+		pr_info("%s: association failed %d\n", __func__, ret);
+scan_lock_out:
+	mutex_unlock(&wl->scan_lock);
+out:
+	mutex_unlock(&wl->assoc_stat_lock);
+}
+/*
+ * Interrupt handler
+ * Called from the ethernet interrupt handler
+ * Processes wireless specific virtual interrupts only
+ */
+void gelic_wl_interrupt(struct net_device *netdev, u64 status)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+
+	if (status & GELIC_CARD_WLAN_COMMAND_COMPLETED) {
+		pr_debug("%s:cmd complete\n", __func__);
+		complete(&wl->cmd_done_intr);
+	}
+
+	if (status & GELIC_CARD_WLAN_EVENT_RECEIVED) {
+		pr_debug("%s:event received\n", __func__);
+		queue_delayed_work(wl->event_queue, &wl->event_work, 0);
+	}
+}
+
+/*
+ * driver helpers
+ */
+static const iw_handler gelic_wl_wext_handler[] =
+{
+	IW_HANDLER(SIOCGIWNAME, gelic_wl_get_name),
+	IW_HANDLER(SIOCGIWRANGE, gelic_wl_get_range),
+	IW_HANDLER(SIOCSIWSCAN, gelic_wl_set_scan),
+	IW_HANDLER(SIOCGIWSCAN, gelic_wl_get_scan),
+	IW_HANDLER(SIOCSIWAUTH, gelic_wl_set_auth),
+	IW_HANDLER(SIOCGIWAUTH, gelic_wl_get_auth),
+	IW_HANDLER(SIOCSIWESSID, gelic_wl_set_essid),
+	IW_HANDLER(SIOCGIWESSID, gelic_wl_get_essid),
+	IW_HANDLER(SIOCSIWENCODE, gelic_wl_set_encode),
+	IW_HANDLER(SIOCGIWENCODE, gelic_wl_get_encode),
+	IW_HANDLER(SIOCSIWAP, gelic_wl_set_ap),
+	IW_HANDLER(SIOCGIWAP, gelic_wl_get_ap),
+	IW_HANDLER(SIOCSIWENCODEEXT, gelic_wl_set_encodeext),
+	IW_HANDLER(SIOCGIWENCODEEXT, gelic_wl_get_encodeext),
+	IW_HANDLER(SIOCSIWMODE, gelic_wl_set_mode),
+	IW_HANDLER(SIOCGIWMODE, gelic_wl_get_mode),
+	IW_HANDLER(SIOCGIWNICKN, gelic_wl_get_nick),
+};
+
+static const struct iw_handler_def gelic_wl_wext_handler_def = {
+	.num_standard		= ARRAY_SIZE(gelic_wl_wext_handler),
+	.standard		= gelic_wl_wext_handler,
+	.get_wireless_stats	= gelic_wl_get_wireless_stats,
+};
+
+static struct net_device *gelic_wl_alloc(struct gelic_card *card)
+{
+	struct net_device *netdev;
+	struct gelic_port *port;
+	struct gelic_wl_info *wl;
+	unsigned int i;
+
+	pr_debug("%s:start\n", __func__);
+	netdev = alloc_etherdev(sizeof(struct gelic_port) +
+				sizeof(struct gelic_wl_info));
+	pr_debug("%s: netdev =%p card=%p\n", __func__, netdev, card);
+	if (!netdev)
+		return NULL;
+
+	strcpy(netdev->name, "wlan%d");
+
+	port = netdev_priv(netdev);
+	port->netdev = netdev;
+	port->card = card;
+	port->type = GELIC_PORT_WIRELESS;
+
+	wl = port_wl(port);
+	pr_debug("%s: wl=%p port=%p\n", __func__, wl, port);
+
+	/* allocate scan list */
+	wl->networks = kcalloc(GELIC_WL_BSS_MAX_ENT,
+			       sizeof(struct gelic_wl_scan_info),
+			       GFP_KERNEL);
+
+	if (!wl->networks)
+		goto fail_bss;
+
+	wl->eurus_cmd_queue = create_singlethread_workqueue("gelic_cmd");
+	if (!wl->eurus_cmd_queue)
+		goto fail_cmd_workqueue;
+
+	wl->event_queue = create_singlethread_workqueue("gelic_event");
+	if (!wl->event_queue)
+		goto fail_event_workqueue;
+
+	INIT_LIST_HEAD(&wl->network_free_list);
+	INIT_LIST_HEAD(&wl->network_list);
+	for (i = 0; i < GELIC_WL_BSS_MAX_ENT; i++)
+		list_add_tail(&wl->networks[i].list,
+			      &wl->network_free_list);
+	init_completion(&wl->cmd_done_intr);
+
+	INIT_DELAYED_WORK(&wl->event_work, gelic_wl_event_worker);
+	INIT_DELAYED_WORK(&wl->assoc_work, gelic_wl_assoc_worker);
+	mutex_init(&wl->scan_lock);
+	mutex_init(&wl->assoc_stat_lock);
+
+	init_completion(&wl->scan_done);
+	/* for the case that no scan request is issued and stop() is called */
+	complete(&wl->scan_done);
+
+	spin_lock_init(&wl->lock);
+
+	wl->scan_age = 5*HZ; /* FIXME */
+
+	/* buffer for receiving scanned list etc */
+	BUILD_BUG_ON(PAGE_SIZE <
+		     sizeof(struct gelic_eurus_scan_info) *
+		     GELIC_EURUS_MAX_SCAN);
+	pr_debug("%s:end\n", __func__);
+	return netdev;
+
+fail_event_workqueue:
+	destroy_workqueue(wl->eurus_cmd_queue);
+fail_cmd_workqueue:
+	kfree(wl->networks);
+fail_bss:
+	free_netdev(netdev);
+	pr_debug("%s:end error\n", __func__);
+	return NULL;
+
+}
+
+static void gelic_wl_free(struct gelic_wl_info *wl)
+{
+	struct gelic_wl_scan_info *scan_info;
+	unsigned int i;
+
+	pr_debug("%s: <-\n", __func__);
+
+	pr_debug("%s: destroy queues\n", __func__);
+	destroy_workqueue(wl->eurus_cmd_queue);
+	destroy_workqueue(wl->event_queue);
+
+	scan_info = wl->networks;
+	for (i = 0; i < GELIC_WL_BSS_MAX_ENT; i++, scan_info++)
+		kfree(scan_info->hwinfo);
+	kfree(wl->networks);
+
+	free_netdev(port_to_netdev(wl_port(wl)));
+
+	pr_debug("%s: ->\n", __func__);
+}
+
+static int gelic_wl_try_associate(struct net_device *netdev)
+{
+	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
+	int ret = -1;
+	unsigned int i;
+
+	pr_debug("%s: <-\n", __func__);
+
+	/* check constraits for start association */
+	/* for no access restriction AP */
+	if (wl->group_cipher_method == GELIC_WL_CIPHER_NONE) {
+		if (test_bit(GELIC_WL_STAT_CONFIGURED,
+			     &wl->stat))
+			goto do_associate;
+		else {
+			pr_debug("%s: no wep, not configured\n", __func__);
+			return ret;
+		}
+	}
+
+	/* for WEP, one of four keys should be set */
+	if (wl->group_cipher_method == GELIC_WL_CIPHER_WEP) {
+		/* one of keys set */
+		for (i = 0; i < GELIC_WEP_KEYS; i++) {
+			if (test_bit(i, &wl->key_enabled))
+			    goto do_associate;
+		}
+		pr_debug("%s: WEP, but no key specified\n", __func__);
+		return ret;
+	}
+
+	/* for WPA[2], psk should be set */
+	if ((wl->group_cipher_method == GELIC_WL_CIPHER_TKIP) ||
+	    (wl->group_cipher_method == GELIC_WL_CIPHER_AES)) {
+		if (test_bit(GELIC_WL_STAT_WPA_PSK_SET,
+			     &wl->stat))
+			goto do_associate;
+		else {
+			pr_debug("%s: AES/TKIP, but PSK not configured\n",
+				 __func__);
+			return ret;
+		}
+	}
+
+do_associate:
+	ret = schedule_delayed_work(&wl->assoc_work, 0);
+	pr_debug("%s: start association work %d\n", __func__, ret);
+	return ret;
+}
+
+/*
+ * netdev handlers
+ */
+static int gelic_wl_open(struct net_device *netdev)
+{
+	struct gelic_card *card = netdev_card(netdev);
+
+	pr_debug("%s:->%p\n", __func__, netdev);
+
+	gelic_card_up(card);
+
+	/* try to associate */
+	gelic_wl_try_associate(netdev);
+
+	netif_start_queue(netdev);
+
+	pr_debug("%s:<-\n", __func__);
+	return 0;
+}
+
+/*
+ * reset state machine
+ */
+static int gelic_wl_reset_state(struct gelic_wl_info *wl)
+{
+	struct gelic_wl_scan_info *target;
+	struct gelic_wl_scan_info *tmp;
+
+	/* empty scan list */
+	list_for_each_entry_safe(target, tmp, &wl->network_list, list) {
+		list_move_tail(&target->list, &wl->network_free_list);
+	}
+	wl->scan_stat = GELIC_WL_SCAN_STAT_INIT;
+
+	/* clear configuration */
+	wl->auth_method = GELIC_EURUS_AUTH_OPEN;
+	wl->group_cipher_method = GELIC_WL_CIPHER_NONE;
+	wl->pairwise_cipher_method = GELIC_WL_CIPHER_NONE;
+	wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE;
+
+	wl->key_enabled = 0;
+	wl->current_key = 0;
+
+	wl->psk_type = GELIC_EURUS_WPA_PSK_PASSPHRASE;
+	wl->psk_len = 0;
+
+	wl->essid_len = 0;
+	memset(wl->essid, 0, sizeof(wl->essid));
+	memset(wl->bssid, 0, sizeof(wl->bssid));
+	memset(wl->active_bssid, 0, sizeof(wl->active_bssid));
+
+	wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN;
+
+	memset(&wl->iwstat, 0, sizeof(wl->iwstat));
+	/* all status bit clear */
+	wl->stat = 0;
+	return 0;
+}
+
+/*
+ * Tell eurus to terminate association
+ */
+static void gelic_wl_disconnect(struct net_device *netdev)
+{
+	struct gelic_port *port = netdev_priv(netdev);
+	struct gelic_wl_info *wl = port_wl(port);
+	struct gelic_eurus_cmd *cmd;
+
+	/*
+	 * If scann process is running on chip,
+	 * further requests will be rejected
+	 */
+	if (wl->scan_stat == GELIC_WL_SCAN_STAT_SCANNING)
+		wait_for_completion_timeout(&wl->scan_done, HZ);
+
+	cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_DISASSOC, NULL, 0);
+	kfree(cmd);
+	gelic_wl_send_iwap_event(wl, NULL);
+};
+
+static int gelic_wl_stop(struct net_device *netdev)
+{
+	struct gelic_port *port = netdev_priv(netdev);
+	struct gelic_wl_info *wl = port_wl(port);
+	struct gelic_card *card = netdev_card(netdev);
+
+	pr_debug("%s:<-\n", __func__);
+
+	/*
+	 * Cancel pending association work.
+	 * event work can run after netdev down
+	 */
+	cancel_delayed_work(&wl->assoc_work);
+
+	if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED)
+		gelic_wl_disconnect(netdev);
+
+	/* reset our state machine */
+	gelic_wl_reset_state(wl);
+
+	netif_stop_queue(netdev);
+
+	gelic_card_down(card);
+
+	pr_debug("%s:->\n", __func__);
+	return 0;
+}
+
+/* -- */
+
+static const struct net_device_ops gelic_wl_netdevice_ops = {
+	.ndo_open = gelic_wl_open,
+	.ndo_stop = gelic_wl_stop,
+	.ndo_start_xmit = gelic_net_xmit,
+	.ndo_set_rx_mode = gelic_net_set_multi,
+	.ndo_tx_timeout = gelic_net_tx_timeout,
+	.ndo_set_mac_address = eth_mac_addr,
+	.ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = gelic_net_poll_controller,
+#endif
+};
+
+static const struct ethtool_ops gelic_wl_ethtool_ops = {
+	.get_drvinfo	= gelic_net_get_drvinfo,
+	.get_link	= gelic_wl_get_link,
+};
+
+static void gelic_wl_setup_netdev_ops(struct net_device *netdev)
+{
+	struct gelic_wl_info *wl;
+	wl = port_wl(netdev_priv(netdev));
+	BUG_ON(!wl);
+	netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
+
+	netdev->ethtool_ops = &gelic_wl_ethtool_ops;
+	netdev->netdev_ops = &gelic_wl_netdevice_ops;
+	netdev->wireless_data = &wl->wireless_data;
+	netdev->wireless_handlers = &gelic_wl_wext_handler_def;
+}
+
+/*
+ * driver probe/remove
+ */
+int gelic_wl_driver_probe(struct gelic_card *card)
+{
+	int ret;
+	struct net_device *netdev;
+
+	pr_debug("%s:start\n", __func__);
+
+	if (ps3_compare_firmware_version(1, 6, 0) < 0)
+		return 0;
+	if (!card->vlan[GELIC_PORT_WIRELESS].tx)
+		return 0;
+
+	/* alloc netdevice for wireless */
+	netdev = gelic_wl_alloc(card);
+	if (!netdev)
+		return -ENOMEM;
+
+	/* setup net_device structure */
+	SET_NETDEV_DEV(netdev, &card->dev->core);
+	gelic_wl_setup_netdev_ops(netdev);
+
+	/* setup some of net_device and register it */
+	ret = gelic_net_setup_netdev(netdev, card);
+	if (ret)
+		goto fail_setup;
+	card->netdev[GELIC_PORT_WIRELESS] = netdev;
+
+	/* add enable wireless interrupt */
+	card->irq_mask |= GELIC_CARD_WLAN_EVENT_RECEIVED |
+		GELIC_CARD_WLAN_COMMAND_COMPLETED;
+	/* to allow wireless commands while both interfaces are down */
+	gelic_card_set_irq_mask(card, GELIC_CARD_WLAN_EVENT_RECEIVED |
+				GELIC_CARD_WLAN_COMMAND_COMPLETED);
+	pr_debug("%s:end\n", __func__);
+	return 0;
+
+fail_setup:
+	gelic_wl_free(port_wl(netdev_port(netdev)));
+
+	return ret;
+}
+
+int gelic_wl_driver_remove(struct gelic_card *card)
+{
+	struct gelic_wl_info *wl;
+	struct net_device *netdev;
+
+	pr_debug("%s:start\n", __func__);
+
+	if (ps3_compare_firmware_version(1, 6, 0) < 0)
+		return 0;
+	if (!card->vlan[GELIC_PORT_WIRELESS].tx)
+		return 0;
+
+	netdev = card->netdev[GELIC_PORT_WIRELESS];
+	wl = port_wl(netdev_priv(netdev));
+
+	/* if the interface was not up, but associated */
+	if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED)
+		gelic_wl_disconnect(netdev);
+
+	complete(&wl->cmd_done_intr);
+
+	/* cancel all work queue */
+	cancel_delayed_work(&wl->assoc_work);
+	cancel_delayed_work(&wl->event_work);
+	flush_workqueue(wl->eurus_cmd_queue);
+	flush_workqueue(wl->event_queue);
+
+	unregister_netdev(netdev);
+
+	/* disable wireless interrupt */
+	pr_debug("%s: disable intr\n", __func__);
+	card->irq_mask &= ~(GELIC_CARD_WLAN_EVENT_RECEIVED |
+			    GELIC_CARD_WLAN_COMMAND_COMPLETED);
+	/* free bss list, netdev*/
+	gelic_wl_free(wl);
+	pr_debug("%s:end\n", __func__);
+	return 0;
+}
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.h b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.h
new file mode 100644
index 000000000..11f443d8e
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.h
@@ -0,0 +1,326 @@
+/*
+ *  PS3 gelic network driver.
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2007 Sony Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _GELIC_WIRELESS_H
+#define _GELIC_WIRELESS_H
+
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+
+
+/* return value from  GELIC_LV1_GET_WLAN_EVENT netcontrol */
+enum gelic_lv1_wl_event {
+	GELIC_LV1_WL_EVENT_DEVICE_READY   = 0x01, /* Eurus ready */
+	GELIC_LV1_WL_EVENT_SCAN_COMPLETED = 0x02, /* Scan has completed */
+	GELIC_LV1_WL_EVENT_DEAUTH         = 0x04, /* Deauthed by the AP */
+	GELIC_LV1_WL_EVENT_BEACON_LOST    = 0x08, /* Beacon lost detected */
+	GELIC_LV1_WL_EVENT_CONNECTED      = 0x10, /* Connected to AP */
+	GELIC_LV1_WL_EVENT_WPA_CONNECTED  = 0x20, /* WPA connection */
+	GELIC_LV1_WL_EVENT_WPA_ERROR      = 0x40, /* MIC error */
+};
+
+/* arguments for GELIC_LV1_POST_WLAN_COMMAND netcontrol */
+enum gelic_eurus_command {
+	GELIC_EURUS_CMD_ASSOC		=  1, /* association start */
+	GELIC_EURUS_CMD_DISASSOC	=  2, /* disassociate      */
+	GELIC_EURUS_CMD_START_SCAN	=  3, /* scan start        */
+	GELIC_EURUS_CMD_GET_SCAN	=  4, /* get scan result   */
+	GELIC_EURUS_CMD_SET_COMMON_CFG	=  5, /* set common config */
+	GELIC_EURUS_CMD_GET_COMMON_CFG	=  6, /* set common config */
+	GELIC_EURUS_CMD_SET_WEP_CFG	=  7, /* set WEP config    */
+	GELIC_EURUS_CMD_GET_WEP_CFG	=  8, /* get WEP config    */
+	GELIC_EURUS_CMD_SET_WPA_CFG	=  9, /* set WPA config    */
+	GELIC_EURUS_CMD_GET_WPA_CFG	= 10, /* get WPA config    */
+	GELIC_EURUS_CMD_GET_RSSI_CFG	= 11, /* get RSSI info.    */
+	GELIC_EURUS_CMD_MAX_INDEX
+};
+
+/* for GELIC_EURUS_CMD_COMMON_CFG */
+enum gelic_eurus_bss_type {
+	GELIC_EURUS_BSS_INFRA = 0,
+	GELIC_EURUS_BSS_ADHOC = 1, /* not supported */
+};
+
+enum gelic_eurus_auth_method {
+	GELIC_EURUS_AUTH_OPEN = 0, /* FIXME: WLAN_AUTH_OPEN */
+	GELIC_EURUS_AUTH_SHARED = 1, /* not supported */
+};
+
+enum gelic_eurus_opmode {
+	GELIC_EURUS_OPMODE_11BG = 0, /* 802.11b/g */
+	GELIC_EURUS_OPMODE_11B = 1, /* 802.11b only */
+	GELIC_EURUS_OPMODE_11G = 2, /* 802.11g only */
+};
+
+struct gelic_eurus_common_cfg {
+	/* all fields are big endian */
+	u16 scan_index;
+	u16 bss_type;    /* infra or adhoc */
+	u16 auth_method; /* shared key or open */
+	u16 op_mode; /* B/G */
+} __packed;
+
+
+/* for GELIC_EURUS_CMD_WEP_CFG */
+enum gelic_eurus_wep_security {
+	GELIC_EURUS_WEP_SEC_NONE	= 0,
+	GELIC_EURUS_WEP_SEC_40BIT	= 1,
+	GELIC_EURUS_WEP_SEC_104BIT	= 2,
+};
+
+struct gelic_eurus_wep_cfg {
+	/* all fields are big endian */
+	u16 security;
+	u8 key[4][16];
+} __packed;
+
+/* for GELIC_EURUS_CMD_WPA_CFG */
+enum gelic_eurus_wpa_security {
+	GELIC_EURUS_WPA_SEC_NONE		= 0x0000,
+	/* group=TKIP, pairwise=TKIP */
+	GELIC_EURUS_WPA_SEC_WPA_TKIP_TKIP	= 0x0001,
+	/* group=AES, pairwise=AES */
+	GELIC_EURUS_WPA_SEC_WPA_AES_AES		= 0x0002,
+	/* group=TKIP, pairwise=TKIP */
+	GELIC_EURUS_WPA_SEC_WPA2_TKIP_TKIP	= 0x0004,
+	/* group=AES, pairwise=AES */
+	GELIC_EURUS_WPA_SEC_WPA2_AES_AES	= 0x0008,
+	/* group=TKIP, pairwise=AES */
+	GELIC_EURUS_WPA_SEC_WPA_TKIP_AES	= 0x0010,
+	/* group=TKIP, pairwise=AES */
+	GELIC_EURUS_WPA_SEC_WPA2_TKIP_AES	= 0x0020,
+};
+
+enum gelic_eurus_wpa_psk_type {
+	GELIC_EURUS_WPA_PSK_PASSPHRASE	= 0, /* passphrase string   */
+	GELIC_EURUS_WPA_PSK_BIN		= 1, /* 32 bytes binary key */
+};
+
+#define GELIC_WL_EURUS_PSK_MAX_LEN	64
+#define WPA_PSK_LEN			32 /* WPA spec says 256bit */
+
+struct gelic_eurus_wpa_cfg {
+	/* all fields are big endian */
+	u16 security;
+	u16 psk_type; /* psk key encoding type */
+	u8 psk[GELIC_WL_EURUS_PSK_MAX_LEN]; /* psk key; hex or passphrase */
+} __packed;
+
+/* for GELIC_EURUS_CMD_{START,GET}_SCAN */
+enum gelic_eurus_scan_capability {
+	GELIC_EURUS_SCAN_CAP_ADHOC	= 0x0000,
+	GELIC_EURUS_SCAN_CAP_INFRA	= 0x0001,
+	GELIC_EURUS_SCAN_CAP_MASK	= 0x0001,
+};
+
+enum gelic_eurus_scan_sec_type {
+	GELIC_EURUS_SCAN_SEC_NONE	= 0x0000,
+	GELIC_EURUS_SCAN_SEC_WEP	= 0x0100,
+	GELIC_EURUS_SCAN_SEC_WPA	= 0x0200,
+	GELIC_EURUS_SCAN_SEC_WPA2	= 0x0400,
+	GELIC_EURUS_SCAN_SEC_MASK	= 0x0f00,
+};
+
+enum gelic_eurus_scan_sec_wep_type {
+	GELIC_EURUS_SCAN_SEC_WEP_UNKNOWN	= 0x0000,
+	GELIC_EURUS_SCAN_SEC_WEP_40		= 0x0001,
+	GELIC_EURUS_SCAN_SEC_WEP_104		= 0x0002,
+	GELIC_EURUS_SCAN_SEC_WEP_MASK		= 0x0003,
+};
+
+enum gelic_eurus_scan_sec_wpa_type {
+	GELIC_EURUS_SCAN_SEC_WPA_UNKNOWN	= 0x0000,
+	GELIC_EURUS_SCAN_SEC_WPA_TKIP		= 0x0001,
+	GELIC_EURUS_SCAN_SEC_WPA_AES		= 0x0002,
+	GELIC_EURUS_SCAN_SEC_WPA_MASK		= 0x0003,
+};
+
+/*
+ * hw BSS information structure returned from GELIC_EURUS_CMD_GET_SCAN
+ */
+struct gelic_eurus_scan_info {
+	/* all fields are big endian */
+	__be16 size;
+	__be16 rssi; /* percentage */
+	__be16 channel; /* channel number */
+	__be16 beacon_period; /* FIXME: in msec unit */
+	__be16 capability;
+	__be16 security;
+	u8  bssid[8]; /* last ETH_ALEN are valid. bssid[0],[1] are unused */
+	u8  essid[32]; /* IW_ESSID_MAX_SIZE */
+	u8  rate[16]; /* first 12 are valid */
+	u8  ext_rate[16]; /* first 16 are valid */
+	__be32 reserved1;
+	__be32 reserved2;
+	__be32 reserved3;
+	__be32 reserved4;
+	u8 elements[0]; /* ie */
+} __packed;
+
+/* the hypervisor returns bbs up to 16 */
+#define GELIC_EURUS_MAX_SCAN  (16)
+struct gelic_wl_scan_info {
+	struct list_head list;
+	struct gelic_eurus_scan_info *hwinfo;
+
+	int valid; /* set 1 if this entry was in latest scanned list
+		     * from Eurus */
+	unsigned int eurus_index; /* index in the Eurus list */
+	unsigned long last_scanned; /* acquired time */
+
+	unsigned int rate_len;
+	unsigned int rate_ext_len;
+	unsigned int essid_len;
+};
+
+/* for GELIC_EURUS_CMD_GET_RSSI */
+struct gelic_eurus_rssi_info {
+	/* big endian */
+	__be16 rssi;
+} __packed;
+
+
+/* for 'stat' member of gelic_wl_info */
+enum gelic_wl_info_status_bit {
+	GELIC_WL_STAT_CONFIGURED,
+	GELIC_WL_STAT_CH_INFO,   /* ch info acquired */
+	GELIC_WL_STAT_ESSID_SET, /* ESSID specified by userspace */
+	GELIC_WL_STAT_BSSID_SET, /* BSSID specified by userspace */
+	GELIC_WL_STAT_WPA_PSK_SET, /* PMK specified by userspace */
+	GELIC_WL_STAT_WPA_LEVEL_SET, /* WEP or WPA[2] selected */
+};
+
+/* for 'scan_stat' member of gelic_wl_info */
+enum gelic_wl_scan_state {
+	/* just initialized or get last scan result failed */
+	GELIC_WL_SCAN_STAT_INIT,
+	/* scan request issued, accepted or chip is scanning */
+	GELIC_WL_SCAN_STAT_SCANNING,
+	/* scan results retrieved */
+	GELIC_WL_SCAN_STAT_GOT_LIST,
+};
+
+/* for 'cipher_method' */
+enum gelic_wl_cipher_method {
+	GELIC_WL_CIPHER_NONE,
+	GELIC_WL_CIPHER_WEP,
+	GELIC_WL_CIPHER_TKIP,
+	GELIC_WL_CIPHER_AES,
+};
+
+/* for 'wpa_level' */
+enum gelic_wl_wpa_level {
+	GELIC_WL_WPA_LEVEL_NONE,
+	GELIC_WL_WPA_LEVEL_WPA,
+	GELIC_WL_WPA_LEVEL_WPA2,
+};
+
+/* for 'assoc_stat' */
+enum gelic_wl_assoc_state {
+	GELIC_WL_ASSOC_STAT_DISCONN,
+	GELIC_WL_ASSOC_STAT_ASSOCIATING,
+	GELIC_WL_ASSOC_STAT_ASSOCIATED,
+};
+/* part of private data alloc_etherdev() allocated */
+#define GELIC_WEP_KEYS 4
+struct gelic_wl_info {
+	/* bss list */
+	struct mutex scan_lock;
+	struct list_head network_list;
+	struct list_head network_free_list;
+	struct gelic_wl_scan_info *networks;
+
+	unsigned long scan_age; /* last scanned time */
+	enum gelic_wl_scan_state scan_stat;
+	struct completion scan_done;
+
+	/* eurus command queue */
+	struct workqueue_struct *eurus_cmd_queue;
+	struct completion cmd_done_intr;
+
+	/* eurus event handling */
+	struct workqueue_struct *event_queue;
+	struct delayed_work event_work;
+
+	/* wl status bits */
+	unsigned long stat;
+	enum gelic_eurus_auth_method auth_method; /* open/shared */
+	enum gelic_wl_cipher_method group_cipher_method;
+	enum gelic_wl_cipher_method pairwise_cipher_method;
+	enum gelic_wl_wpa_level wpa_level; /* wpa/wpa2 */
+
+	/* association handling */
+	struct mutex assoc_stat_lock;
+	struct delayed_work assoc_work;
+	enum gelic_wl_assoc_state assoc_stat;
+	struct completion assoc_done;
+
+	spinlock_t lock;
+	u16 ch_info; /* available channels. bit0 = ch1 */
+	/* WEP keys */
+	u8 key[GELIC_WEP_KEYS][IW_ENCODING_TOKEN_MAX];
+	unsigned long key_enabled;
+	unsigned int key_len[GELIC_WEP_KEYS];
+	unsigned int current_key;
+	/* WWPA PSK */
+	u8 psk[GELIC_WL_EURUS_PSK_MAX_LEN];
+	enum gelic_eurus_wpa_psk_type psk_type;
+	unsigned int psk_len;
+
+	u8 essid[IW_ESSID_MAX_SIZE];
+	u8 bssid[ETH_ALEN]; /* userland requested */
+	u8 active_bssid[ETH_ALEN]; /* associated bssid */
+	unsigned int essid_len;
+
+	struct iw_public_data wireless_data;
+	struct iw_statistics iwstat;
+};
+
+#define GELIC_WL_BSS_MAX_ENT 32
+#define GELIC_WL_ASSOC_RETRY 50
+static inline struct gelic_port *wl_port(struct gelic_wl_info *wl)
+{
+	return container_of((void *)wl, struct gelic_port, priv);
+}
+static inline struct gelic_wl_info *port_wl(struct gelic_port *port)
+{
+	return port_priv(port);
+}
+
+struct gelic_eurus_cmd {
+	struct work_struct work;
+	struct gelic_wl_info *wl;
+	unsigned int cmd; /* command code */
+	u64 tag;
+	u64 size;
+	void *buffer;
+	unsigned int buf_size;
+	struct completion done;
+	int status;
+	u64 cmd_status;
+};
+
+/* private ioctls to pass PSK */
+#define GELIC_WL_PRIV_SET_PSK		(SIOCIWFIRSTPRIV + 0)
+#define GELIC_WL_PRIV_GET_PSK		(SIOCIWFIRSTPRIV + 1)
+
+int gelic_wl_driver_probe(struct gelic_card *card);
+int gelic_wl_driver_remove(struct gelic_card *card);
+void gelic_wl_interrupt(struct net_device *netdev, u64 status);
+#endif /* _GELIC_WIRELESS_H */
diff --git a/drivers/net/ethernet/toshiba/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c
new file mode 100644
index 000000000..e66014e04
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/spider_net.c
@@ -0,0 +1,2550 @@
+/*
+ * Network device driver for Cell Processor-Based Blade and Celleb platform
+ *
+ * (C) Copyright IBM Corp. 2005
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * Authors : Utz Bacher <utz.bacher@de.ibm.com>
+ *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/compiler.h>
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/firmware.h>
+#include <linux/if_vlan.h>
+#include <linux/in.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/gfp.h>
+#include <linux/ioport.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/skbuff.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/bitops.h>
+#include <net/checksum.h>
+
+#include "spider_net.h"
+
+MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
+	      "<Jens.Osterkamp@de.ibm.com>");
+MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(VERSION);
+MODULE_FIRMWARE(SPIDER_NET_FIRMWARE_NAME);
+
+static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT;
+static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT;
+
+module_param(rx_descriptors, int, 0444);
+module_param(tx_descriptors, int, 0444);
+
+MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \
+		 "in rx chains");
+MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \
+		 "in tx chain");
+
+char spider_net_driver_name[] = "spidernet";
+
+static const struct pci_device_id spider_net_pci_tbl[] = {
+	{ PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl);
+
+/**
+ * spider_net_read_reg - reads an SMMIO register of a card
+ * @card: device structure
+ * @reg: register to read from
+ *
+ * returns the content of the specified SMMIO register.
+ */
+static inline u32
+spider_net_read_reg(struct spider_net_card *card, u32 reg)
+{
+	/* We use the powerpc specific variants instead of readl_be() because
+	 * we know spidernet is not a real PCI device and we can thus avoid the
+	 * performance hit caused by the PCI workarounds.
+	 */
+	return in_be32(card->regs + reg);
+}
+
+/**
+ * spider_net_write_reg - writes to an SMMIO register of a card
+ * @card: device structure
+ * @reg: register to write to
+ * @value: value to write into the specified SMMIO register
+ */
+static inline void
+spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value)
+{
+	/* We use the powerpc specific variants instead of writel_be() because
+	 * we know spidernet is not a real PCI device and we can thus avoid the
+	 * performance hit caused by the PCI workarounds.
+	 */
+	out_be32(card->regs + reg, value);
+}
+
+/**
+ * spider_net_write_phy - write to phy register
+ * @netdev: adapter to be written to
+ * @mii_id: id of MII
+ * @reg: PHY register
+ * @val: value to be written to phy register
+ *
+ * spider_net_write_phy_register writes to an arbitrary PHY
+ * register via the spider GPCWOPCMD register. We assume the queue does
+ * not run full (not more than 15 commands outstanding).
+ **/
+static void
+spider_net_write_phy(struct net_device *netdev, int mii_id,
+		     int reg, int val)
+{
+	struct spider_net_card *card = netdev_priv(netdev);
+	u32 writevalue;
+
+	writevalue = ((u32)mii_id << 21) |
+		((u32)reg << 16) | ((u32)val);
+
+	spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue);
+}
+
+/**
+ * spider_net_read_phy - read from phy register
+ * @netdev: network device to be read from
+ * @mii_id: id of MII
+ * @reg: PHY register
+ *
+ * Returns value read from PHY register
+ *
+ * spider_net_write_phy reads from an arbitrary PHY
+ * register via the spider GPCROPCMD register
+ **/
+static int
+spider_net_read_phy(struct net_device *netdev, int mii_id, int reg)
+{
+	struct spider_net_card *card = netdev_priv(netdev);
+	u32 readvalue;
+
+	readvalue = ((u32)mii_id << 21) | ((u32)reg << 16);
+	spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue);
+
+	/* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
+	 * interrupt, as we poll for the completion of the read operation
+	 * in spider_net_read_phy. Should take about 50 us */
+	do {
+		readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD);
+	} while (readvalue & SPIDER_NET_GPREXEC);
+
+	readvalue &= SPIDER_NET_GPRDAT_MASK;
+
+	return readvalue;
+}
+
+/**
+ * spider_net_setup_aneg - initial auto-negotiation setup
+ * @card: device structure
+ **/
+static void
+spider_net_setup_aneg(struct spider_net_card *card)
+{
+	struct mii_phy *phy = &card->phy;
+	u32 advertise = 0;
+	u16 bmsr, estat;
+
+	bmsr  = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
+	estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
+
+	if (bmsr & BMSR_10HALF)
+		advertise |= ADVERTISED_10baseT_Half;
+	if (bmsr & BMSR_10FULL)
+		advertise |= ADVERTISED_10baseT_Full;
+	if (bmsr & BMSR_100HALF)
+		advertise |= ADVERTISED_100baseT_Half;
+	if (bmsr & BMSR_100FULL)
+		advertise |= ADVERTISED_100baseT_Full;
+
+	if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_TFULL))
+		advertise |= SUPPORTED_1000baseT_Full;
+	if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_THALF))
+		advertise |= SUPPORTED_1000baseT_Half;
+
+	sungem_phy_probe(phy, phy->mii_id);
+	phy->def->ops->setup_aneg(phy, advertise);
+
+}
+
+/**
+ * spider_net_rx_irq_off - switch off rx irq on this spider card
+ * @card: device structure
+ *
+ * switches off rx irq by masking them out in the GHIINTnMSK register
+ */
+static void
+spider_net_rx_irq_off(struct spider_net_card *card)
+{
+	u32 regvalue;
+
+	regvalue = SPIDER_NET_INT0_MASK_VALUE & (~SPIDER_NET_RXINT);
+	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
+}
+
+/**
+ * spider_net_rx_irq_on - switch on rx irq on this spider card
+ * @card: device structure
+ *
+ * switches on rx irq by enabling them in the GHIINTnMSK register
+ */
+static void
+spider_net_rx_irq_on(struct spider_net_card *card)
+{
+	u32 regvalue;
+
+	regvalue = SPIDER_NET_INT0_MASK_VALUE | SPIDER_NET_RXINT;
+	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
+}
+
+/**
+ * spider_net_set_promisc - sets the unicast address or the promiscuous mode
+ * @card: card structure
+ *
+ * spider_net_set_promisc sets the unicast destination address filter and
+ * thus either allows for non-promisc mode or promisc mode
+ */
+static void
+spider_net_set_promisc(struct spider_net_card *card)
+{
+	u32 macu, macl;
+	struct net_device *netdev = card->netdev;
+
+	if (netdev->flags & IFF_PROMISC) {
+		/* clear destination entry 0 */
+		spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0);
+		spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0);
+		spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
+				     SPIDER_NET_PROMISC_VALUE);
+	} else {
+		macu = netdev->dev_addr[0];
+		macu <<= 8;
+		macu |= netdev->dev_addr[1];
+		memcpy(&macl, &netdev->dev_addr[2], sizeof(macl));
+
+		macu |= SPIDER_NET_UA_DESCR_VALUE;
+		spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu);
+		spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl);
+		spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
+				     SPIDER_NET_NONPROMISC_VALUE);
+	}
+}
+
+/**
+ * spider_net_get_descr_status -- returns the status of a descriptor
+ * @descr: descriptor to look at
+ *
+ * returns the status as in the dmac_cmd_status field of the descriptor
+ */
+static inline int
+spider_net_get_descr_status(struct spider_net_hw_descr *hwdescr)
+{
+	return hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK;
+}
+
+/**
+ * spider_net_free_chain - free descriptor chain
+ * @card: card structure
+ * @chain: address of chain
+ *
+ */
+static void
+spider_net_free_chain(struct spider_net_card *card,
+		      struct spider_net_descr_chain *chain)
+{
+	struct spider_net_descr *descr;
+
+	descr = chain->ring;
+	do {
+		descr->bus_addr = 0;
+		descr->hwdescr->next_descr_addr = 0;
+		descr = descr->next;
+	} while (descr != chain->ring);
+
+	dma_free_coherent(&card->pdev->dev, chain->num_desc * sizeof(struct spider_net_hw_descr),
+			  chain->hwring, chain->dma_addr);
+}
+
+/**
+ * spider_net_init_chain - alloc and link descriptor chain
+ * @card: card structure
+ * @chain: address of chain
+ *
+ * We manage a circular list that mirrors the hardware structure,
+ * except that the hardware uses bus addresses.
+ *
+ * Returns 0 on success, <0 on failure
+ */
+static int
+spider_net_init_chain(struct spider_net_card *card,
+		       struct spider_net_descr_chain *chain)
+{
+	int i;
+	struct spider_net_descr *descr;
+	struct spider_net_hw_descr *hwdescr;
+	dma_addr_t buf;
+	size_t alloc_size;
+
+	alloc_size = chain->num_desc * sizeof(struct spider_net_hw_descr);
+
+	chain->hwring = dma_alloc_coherent(&card->pdev->dev, alloc_size,
+					   &chain->dma_addr, GFP_KERNEL);
+	if (!chain->hwring)
+		return -ENOMEM;
+
+	memset(chain->ring, 0, chain->num_desc * sizeof(struct spider_net_descr));
+
+	/* Set up the hardware pointers in each descriptor */
+	descr = chain->ring;
+	hwdescr = chain->hwring;
+	buf = chain->dma_addr;
+	for (i=0; i < chain->num_desc; i++, descr++, hwdescr++) {
+		hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
+		hwdescr->next_descr_addr = 0;
+
+		descr->hwdescr = hwdescr;
+		descr->bus_addr = buf;
+		descr->next = descr + 1;
+		descr->prev = descr - 1;
+
+		buf += sizeof(struct spider_net_hw_descr);
+	}
+	/* do actual circular list */
+	(descr-1)->next = chain->ring;
+	chain->ring->prev = descr-1;
+
+	spin_lock_init(&chain->lock);
+	chain->head = chain->ring;
+	chain->tail = chain->ring;
+	return 0;
+}
+
+/**
+ * spider_net_free_rx_chain_contents - frees descr contents in rx chain
+ * @card: card structure
+ *
+ * returns 0 on success, <0 on failure
+ */
+static void
+spider_net_free_rx_chain_contents(struct spider_net_card *card)
+{
+	struct spider_net_descr *descr;
+
+	descr = card->rx_chain.head;
+	do {
+		if (descr->skb) {
+			pci_unmap_single(card->pdev, descr->hwdescr->buf_addr,
+					 SPIDER_NET_MAX_FRAME,
+					 PCI_DMA_BIDIRECTIONAL);
+			dev_kfree_skb(descr->skb);
+			descr->skb = NULL;
+		}
+		descr = descr->next;
+	} while (descr != card->rx_chain.head);
+}
+
+/**
+ * spider_net_prepare_rx_descr - Reinitialize RX descriptor
+ * @card: card structure
+ * @descr: descriptor to re-init
+ *
+ * Return 0 on success, <0 on failure.
+ *
+ * Allocates a new rx skb, iommu-maps it and attaches it to the
+ * descriptor. Mark the descriptor as activated, ready-to-use.
+ */
+static int
+spider_net_prepare_rx_descr(struct spider_net_card *card,
+			    struct spider_net_descr *descr)
+{
+	struct spider_net_hw_descr *hwdescr = descr->hwdescr;
+	dma_addr_t buf;
+	int offset;
+	int bufsize;
+
+	/* we need to round up the buffer size to a multiple of 128 */
+	bufsize = (SPIDER_NET_MAX_FRAME + SPIDER_NET_RXBUF_ALIGN - 1) &
+		(~(SPIDER_NET_RXBUF_ALIGN - 1));
+
+	/* and we need to have it 128 byte aligned, therefore we allocate a
+	 * bit more */
+	/* allocate an skb */
+	descr->skb = netdev_alloc_skb(card->netdev,
+				      bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
+	if (!descr->skb) {
+		if (netif_msg_rx_err(card) && net_ratelimit())
+			dev_err(&card->netdev->dev,
+			        "Not enough memory to allocate rx buffer\n");
+		card->spider_stats.alloc_rx_skb_error++;
+		return -ENOMEM;
+	}
+	hwdescr->buf_size = bufsize;
+	hwdescr->result_size = 0;
+	hwdescr->valid_size = 0;
+	hwdescr->data_status = 0;
+	hwdescr->data_error = 0;
+
+	offset = ((unsigned long)descr->skb->data) &
+		(SPIDER_NET_RXBUF_ALIGN - 1);
+	if (offset)
+		skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset);
+	/* iommu-map the skb */
+	buf = pci_map_single(card->pdev, descr->skb->data,
+			SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
+	if (pci_dma_mapping_error(card->pdev, buf)) {
+		dev_kfree_skb_any(descr->skb);
+		descr->skb = NULL;
+		if (netif_msg_rx_err(card) && net_ratelimit())
+			dev_err(&card->netdev->dev, "Could not iommu-map rx buffer\n");
+		card->spider_stats.rx_iommu_map_error++;
+		hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
+	} else {
+		hwdescr->buf_addr = buf;
+		wmb();
+		hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED |
+					 SPIDER_NET_DMAC_NOINTR_COMPLETE;
+	}
+
+	return 0;
+}
+
+/**
+ * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
+ * @card: card structure
+ *
+ * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the
+ * chip by writing to the appropriate register. DMA is enabled in
+ * spider_net_enable_rxdmac.
+ */
+static inline void
+spider_net_enable_rxchtails(struct spider_net_card *card)
+{
+	/* assume chain is aligned correctly */
+	spider_net_write_reg(card, SPIDER_NET_GDADCHA ,
+			     card->rx_chain.tail->bus_addr);
+}
+
+/**
+ * spider_net_enable_rxdmac - enables a receive DMA controller
+ * @card: card structure
+ *
+ * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
+ * in the GDADMACCNTR register
+ */
+static inline void
+spider_net_enable_rxdmac(struct spider_net_card *card)
+{
+	wmb();
+	spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
+			     SPIDER_NET_DMA_RX_VALUE);
+}
+
+/**
+ * spider_net_disable_rxdmac - disables the receive DMA controller
+ * @card: card structure
+ *
+ * spider_net_disable_rxdmac terminates processing on the DMA controller
+ * by turing off the DMA controller, with the force-end flag set.
+ */
+static inline void
+spider_net_disable_rxdmac(struct spider_net_card *card)
+{
+	spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
+			     SPIDER_NET_DMA_RX_FEND_VALUE);
+}
+
+/**
+ * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
+ * @card: card structure
+ *
+ * refills descriptors in the rx chain: allocates skbs and iommu-maps them.
+ */
+static void
+spider_net_refill_rx_chain(struct spider_net_card *card)
+{
+	struct spider_net_descr_chain *chain = &card->rx_chain;
+	unsigned long flags;
+
+	/* one context doing the refill (and a second context seeing that
+	 * and omitting it) is ok. If called by NAPI, we'll be called again
+	 * as spider_net_decode_one_descr is called several times. If some
+	 * interrupt calls us, the NAPI is about to clean up anyway. */
+	if (!spin_trylock_irqsave(&chain->lock, flags))
+		return;
+
+	while (spider_net_get_descr_status(chain->head->hwdescr) ==
+			SPIDER_NET_DESCR_NOT_IN_USE) {
+		if (spider_net_prepare_rx_descr(card, chain->head))
+			break;
+		chain->head = chain->head->next;
+	}
+
+	spin_unlock_irqrestore(&chain->lock, flags);
+}
+
+/**
+ * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
+ * @card: card structure
+ *
+ * Returns 0 on success, <0 on failure.
+ */
+static int
+spider_net_alloc_rx_skbs(struct spider_net_card *card)
+{
+	struct spider_net_descr_chain *chain = &card->rx_chain;
+	struct spider_net_descr *start = chain->tail;
+	struct spider_net_descr *descr = start;
+
+	/* Link up the hardware chain pointers */
+	do {
+		descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
+		descr = descr->next;
+	} while (descr != start);
+
+	/* Put at least one buffer into the chain. if this fails,
+	 * we've got a problem. If not, spider_net_refill_rx_chain
+	 * will do the rest at the end of this function. */
+	if (spider_net_prepare_rx_descr(card, chain->head))
+		goto error;
+	else
+		chain->head = chain->head->next;
+
+	/* This will allocate the rest of the rx buffers;
+	 * if not, it's business as usual later on. */
+	spider_net_refill_rx_chain(card);
+	spider_net_enable_rxdmac(card);
+	return 0;
+
+error:
+	spider_net_free_rx_chain_contents(card);
+	return -ENOMEM;
+}
+
+/**
+ * spider_net_get_multicast_hash - generates hash for multicast filter table
+ * @addr: multicast address
+ *
+ * returns the hash value.
+ *
+ * spider_net_get_multicast_hash calculates a hash value for a given multicast
+ * address, that is used to set the multicast filter tables
+ */
+static u8
+spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr)
+{
+	u32 crc;
+	u8 hash;
+	char addr_for_crc[ETH_ALEN] = { 0, };
+	int i, bit;
+
+	for (i = 0; i < ETH_ALEN * 8; i++) {
+		bit = (addr[i / 8] >> (i % 8)) & 1;
+		addr_for_crc[ETH_ALEN - 1 - i / 8] += bit << (7 - (i % 8));
+	}
+
+	crc = crc32_be(~0, addr_for_crc, netdev->addr_len);
+
+	hash = (crc >> 27);
+	hash <<= 3;
+	hash |= crc & 7;
+	hash &= 0xff;
+
+	return hash;
+}
+
+/**
+ * spider_net_set_multi - sets multicast addresses and promisc flags
+ * @netdev: interface device structure
+ *
+ * spider_net_set_multi configures multicast addresses as needed for the
+ * netdev interface. It also sets up multicast, allmulti and promisc
+ * flags appropriately
+ */
+static void
+spider_net_set_multi(struct net_device *netdev)
+{
+	struct netdev_hw_addr *ha;
+	u8 hash;
+	int i;
+	u32 reg;
+	struct spider_net_card *card = netdev_priv(netdev);
+	DECLARE_BITMAP(bitmask, SPIDER_NET_MULTICAST_HASHES) = {};
+
+	spider_net_set_promisc(card);
+
+	if (netdev->flags & IFF_ALLMULTI) {
+		for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) {
+			set_bit(i, bitmask);
+		}
+		goto write_hash;
+	}
+
+	/* well, we know, what the broadcast hash value is: it's xfd
+	hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
+	set_bit(0xfd, bitmask);
+
+	netdev_for_each_mc_addr(ha, netdev) {
+		hash = spider_net_get_multicast_hash(netdev, ha->addr);
+		set_bit(hash, bitmask);
+	}
+
+write_hash:
+	for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) {
+		reg = 0;
+		if (test_bit(i * 4, bitmask))
+			reg += 0x08;
+		reg <<= 8;
+		if (test_bit(i * 4 + 1, bitmask))
+			reg += 0x08;
+		reg <<= 8;
+		if (test_bit(i * 4 + 2, bitmask))
+			reg += 0x08;
+		reg <<= 8;
+		if (test_bit(i * 4 + 3, bitmask))
+			reg += 0x08;
+
+		spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg);
+	}
+}
+
+/**
+ * spider_net_prepare_tx_descr - fill tx descriptor with skb data
+ * @card: card structure
+ * @skb: packet to use
+ *
+ * returns 0 on success, <0 on failure.
+ *
+ * fills out the descriptor structure with skb data and len. Copies data,
+ * if needed (32bit DMA!)
+ */
+static int
+spider_net_prepare_tx_descr(struct spider_net_card *card,
+			    struct sk_buff *skb)
+{
+	struct spider_net_descr_chain *chain = &card->tx_chain;
+	struct spider_net_descr *descr;
+	struct spider_net_hw_descr *hwdescr;
+	dma_addr_t buf;
+	unsigned long flags;
+
+	buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(card->pdev, buf)) {
+		if (netif_msg_tx_err(card) && net_ratelimit())
+			dev_err(&card->netdev->dev, "could not iommu-map packet (%p, %i). "
+				  "Dropping packet\n", skb->data, skb->len);
+		card->spider_stats.tx_iommu_map_error++;
+		return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&chain->lock, flags);
+	descr = card->tx_chain.head;
+	if (descr->next == chain->tail->prev) {
+		spin_unlock_irqrestore(&chain->lock, flags);
+		pci_unmap_single(card->pdev, buf, skb->len, PCI_DMA_TODEVICE);
+		return -ENOMEM;
+	}
+	hwdescr = descr->hwdescr;
+	chain->head = descr->next;
+
+	descr->skb = skb;
+	hwdescr->buf_addr = buf;
+	hwdescr->buf_size = skb->len;
+	hwdescr->next_descr_addr = 0;
+	hwdescr->data_status = 0;
+
+	hwdescr->dmac_cmd_status =
+			SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_TXFRMTL;
+	spin_unlock_irqrestore(&chain->lock, flags);
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL)
+		switch (ip_hdr(skb)->protocol) {
+		case IPPROTO_TCP:
+			hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP;
+			break;
+		case IPPROTO_UDP:
+			hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP;
+			break;
+		}
+
+	/* Chain the bus address, so that the DMA engine finds this descr. */
+	wmb();
+	descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
+
+	netif_trans_update(card->netdev); /* set netdev watchdog timer */
+	return 0;
+}
+
+static int
+spider_net_set_low_watermark(struct spider_net_card *card)
+{
+	struct spider_net_descr *descr = card->tx_chain.tail;
+	struct spider_net_hw_descr *hwdescr;
+	unsigned long flags;
+	int status;
+	int cnt=0;
+	int i;
+
+	/* Measure the length of the queue. Measurement does not
+	 * need to be precise -- does not need a lock. */
+	while (descr != card->tx_chain.head) {
+		status = descr->hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE;
+		if (status == SPIDER_NET_DESCR_NOT_IN_USE)
+			break;
+		descr = descr->next;
+		cnt++;
+	}
+
+	/* If TX queue is short, don't even bother with interrupts */
+	if (cnt < card->tx_chain.num_desc/4)
+		return cnt;
+
+	/* Set low-watermark 3/4th's of the way into the queue. */
+	descr = card->tx_chain.tail;
+	cnt = (cnt*3)/4;
+	for (i=0;i<cnt; i++)
+		descr = descr->next;
+
+	/* Set the new watermark, clear the old watermark */
+	spin_lock_irqsave(&card->tx_chain.lock, flags);
+	descr->hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_TXDESFLG;
+	if (card->low_watermark && card->low_watermark != descr) {
+		hwdescr = card->low_watermark->hwdescr;
+		hwdescr->dmac_cmd_status =
+		     hwdescr->dmac_cmd_status & ~SPIDER_NET_DESCR_TXDESFLG;
+	}
+	card->low_watermark = descr;
+	spin_unlock_irqrestore(&card->tx_chain.lock, flags);
+	return cnt;
+}
+
+/**
+ * spider_net_release_tx_chain - processes sent tx descriptors
+ * @card: adapter structure
+ * @brutal: if set, don't care about whether descriptor seems to be in use
+ *
+ * returns 0 if the tx ring is empty, otherwise 1.
+ *
+ * spider_net_release_tx_chain releases the tx descriptors that spider has
+ * finished with (if non-brutal) or simply release tx descriptors (if brutal).
+ * If some other context is calling this function, we return 1 so that we're
+ * scheduled again (if we were scheduled) and will not lose initiative.
+ */
+static int
+spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
+{
+	struct net_device *dev = card->netdev;
+	struct spider_net_descr_chain *chain = &card->tx_chain;
+	struct spider_net_descr *descr;
+	struct spider_net_hw_descr *hwdescr;
+	struct sk_buff *skb;
+	u32 buf_addr;
+	unsigned long flags;
+	int status;
+
+	while (1) {
+		spin_lock_irqsave(&chain->lock, flags);
+		if (chain->tail == chain->head) {
+			spin_unlock_irqrestore(&chain->lock, flags);
+			return 0;
+		}
+		descr = chain->tail;
+		hwdescr = descr->hwdescr;
+
+		status = spider_net_get_descr_status(hwdescr);
+		switch (status) {
+		case SPIDER_NET_DESCR_COMPLETE:
+			dev->stats.tx_packets++;
+			dev->stats.tx_bytes += descr->skb->len;
+			break;
+
+		case SPIDER_NET_DESCR_CARDOWNED:
+			if (!brutal) {
+				spin_unlock_irqrestore(&chain->lock, flags);
+				return 1;
+			}
+
+			/* fallthrough, if we release the descriptors
+			 * brutally (then we don't care about
+			 * SPIDER_NET_DESCR_CARDOWNED) */
+
+		case SPIDER_NET_DESCR_RESPONSE_ERROR:
+		case SPIDER_NET_DESCR_PROTECTION_ERROR:
+		case SPIDER_NET_DESCR_FORCE_END:
+			if (netif_msg_tx_err(card))
+				dev_err(&card->netdev->dev, "forcing end of tx descriptor "
+				       "with status x%02x\n", status);
+			dev->stats.tx_errors++;
+			break;
+
+		default:
+			dev->stats.tx_dropped++;
+			if (!brutal) {
+				spin_unlock_irqrestore(&chain->lock, flags);
+				return 1;
+			}
+		}
+
+		chain->tail = descr->next;
+		hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE;
+		skb = descr->skb;
+		descr->skb = NULL;
+		buf_addr = hwdescr->buf_addr;
+		spin_unlock_irqrestore(&chain->lock, flags);
+
+		/* unmap the skb */
+		if (skb) {
+			pci_unmap_single(card->pdev, buf_addr, skb->len,
+					PCI_DMA_TODEVICE);
+			dev_consume_skb_any(skb);
+		}
+	}
+	return 0;
+}
+
+/**
+ * spider_net_kick_tx_dma - enables TX DMA processing
+ * @card: card structure
+ *
+ * This routine will start the transmit DMA running if
+ * it is not already running. This routine ned only be
+ * called when queueing a new packet to an empty tx queue.
+ * Writes the current tx chain head as start address
+ * of the tx descriptor chain and enables the transmission
+ * DMA engine.
+ */
+static inline void
+spider_net_kick_tx_dma(struct spider_net_card *card)
+{
+	struct spider_net_descr *descr;
+
+	if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) &
+			SPIDER_NET_TX_DMA_EN)
+		goto out;
+
+	descr = card->tx_chain.tail;
+	for (;;) {
+		if (spider_net_get_descr_status(descr->hwdescr) ==
+				SPIDER_NET_DESCR_CARDOWNED) {
+			spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
+					descr->bus_addr);
+			spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
+					SPIDER_NET_DMA_TX_VALUE);
+			break;
+		}
+		if (descr == card->tx_chain.head)
+			break;
+		descr = descr->next;
+	}
+
+out:
+	mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
+}
+
+/**
+ * spider_net_xmit - transmits a frame over the device
+ * @skb: packet to send out
+ * @netdev: interface device structure
+ *
+ * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
+ */
+static netdev_tx_t
+spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	int cnt;
+	struct spider_net_card *card = netdev_priv(netdev);
+
+	spider_net_release_tx_chain(card, 0);
+
+	if (spider_net_prepare_tx_descr(card, skb) != 0) {
+		netdev->stats.tx_dropped++;
+		netif_stop_queue(netdev);
+		return NETDEV_TX_BUSY;
+	}
+
+	cnt = spider_net_set_low_watermark(card);
+	if (cnt < 5)
+		spider_net_kick_tx_dma(card);
+	return NETDEV_TX_OK;
+}
+
+/**
+ * spider_net_cleanup_tx_ring - cleans up the TX ring
+ * @card: card structure
+ *
+ * spider_net_cleanup_tx_ring is called by either the tx_timer
+ * or from the NAPI polling routine.
+ * This routine releases resources associted with transmitted
+ * packets, including updating the queue tail pointer.
+ */
+static void
+spider_net_cleanup_tx_ring(struct timer_list *t)
+{
+	struct spider_net_card *card = from_timer(card, t, tx_timer);
+	if ((spider_net_release_tx_chain(card, 0) != 0) &&
+	    (card->netdev->flags & IFF_UP)) {
+		spider_net_kick_tx_dma(card);
+		netif_wake_queue(card->netdev);
+	}
+}
+
+/**
+ * spider_net_do_ioctl - called for device ioctls
+ * @netdev: interface device structure
+ * @ifr: request parameter structure for ioctl
+ * @cmd: command code for ioctl
+ *
+ * returns 0 on success, <0 on failure. Currently, we have no special ioctls.
+ * -EOPNOTSUPP is returned, if an unknown ioctl was requested
+ */
+static int
+spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	switch (cmd) {
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+/**
+ * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
+ * @descr: descriptor to process
+ * @card: card structure
+ *
+ * Fills out skb structure and passes the data to the stack.
+ * The descriptor state is not changed.
+ */
+static void
+spider_net_pass_skb_up(struct spider_net_descr *descr,
+		       struct spider_net_card *card)
+{
+	struct spider_net_hw_descr *hwdescr = descr->hwdescr;
+	struct sk_buff *skb = descr->skb;
+	struct net_device *netdev = card->netdev;
+	u32 data_status = hwdescr->data_status;
+	u32 data_error = hwdescr->data_error;
+
+	skb_put(skb, hwdescr->valid_size);
+
+	/* the card seems to add 2 bytes of junk in front
+	 * of the ethernet frame */
+#define SPIDER_MISALIGN		2
+	skb_pull(skb, SPIDER_MISALIGN);
+	skb->protocol = eth_type_trans(skb, netdev);
+
+	/* checksum offload */
+	skb_checksum_none_assert(skb);
+	if (netdev->features & NETIF_F_RXCSUM) {
+		if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) ==
+		       SPIDER_NET_DATA_STATUS_CKSUM_MASK) &&
+		     !(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK))
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+	}
+
+	if (data_status & SPIDER_NET_VLAN_PACKET) {
+		/* further enhancements: HW-accel VLAN */
+	}
+
+	/* update netdevice statistics */
+	netdev->stats.rx_packets++;
+	netdev->stats.rx_bytes += skb->len;
+
+	/* pass skb up to stack */
+	netif_receive_skb(skb);
+}
+
+static void show_rx_chain(struct spider_net_card *card)
+{
+	struct spider_net_descr_chain *chain = &card->rx_chain;
+	struct spider_net_descr *start= chain->tail;
+	struct spider_net_descr *descr= start;
+	struct spider_net_hw_descr *hwd = start->hwdescr;
+	struct device *dev = &card->netdev->dev;
+	u32 curr_desc, next_desc;
+	int status;
+
+	int tot = 0;
+	int cnt = 0;
+	int off = start - chain->ring;
+	int cstat = hwd->dmac_cmd_status;
+
+	dev_info(dev, "Total number of descrs=%d\n",
+		chain->num_desc);
+	dev_info(dev, "Chain tail located at descr=%d, status=0x%x\n",
+		off, cstat);
+
+	curr_desc = spider_net_read_reg(card, SPIDER_NET_GDACTDPA);
+	next_desc = spider_net_read_reg(card, SPIDER_NET_GDACNEXTDA);
+
+	status = cstat;
+	do
+	{
+		hwd = descr->hwdescr;
+		off = descr - chain->ring;
+		status = hwd->dmac_cmd_status;
+
+		if (descr == chain->head)
+			dev_info(dev, "Chain head is at %d, head status=0x%x\n",
+			         off, status);
+
+		if (curr_desc == descr->bus_addr)
+			dev_info(dev, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n",
+			         off, status);
+
+		if (next_desc == descr->bus_addr)
+			dev_info(dev, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n",
+			         off, status);
+
+		if (hwd->next_descr_addr == 0)
+			dev_info(dev, "chain is cut at %d\n", off);
+
+		if (cstat != status) {
+			int from = (chain->num_desc + off - cnt) % chain->num_desc;
+			int to = (chain->num_desc + off - 1) % chain->num_desc;
+			dev_info(dev, "Have %d (from %d to %d) descrs "
+			         "with stat=0x%08x\n", cnt, from, to, cstat);
+			cstat = status;
+			cnt = 0;
+		}
+
+		cnt ++;
+		tot ++;
+		descr = descr->next;
+	} while (descr != start);
+
+	dev_info(dev, "Last %d descrs with stat=0x%08x "
+	         "for a total of %d descrs\n", cnt, cstat, tot);
+
+#ifdef DEBUG
+	/* Now dump the whole ring */
+	descr = start;
+	do
+	{
+		struct spider_net_hw_descr *hwd = descr->hwdescr;
+		status = spider_net_get_descr_status(hwd);
+		cnt = descr - chain->ring;
+		dev_info(dev, "Descr %d stat=0x%08x skb=%p\n",
+		         cnt, status, descr->skb);
+		dev_info(dev, "bus addr=%08x buf addr=%08x sz=%d\n",
+		         descr->bus_addr, hwd->buf_addr, hwd->buf_size);
+		dev_info(dev, "next=%08x result sz=%d valid sz=%d\n",
+		         hwd->next_descr_addr, hwd->result_size,
+		         hwd->valid_size);
+		dev_info(dev, "dmac=%08x data stat=%08x data err=%08x\n",
+		         hwd->dmac_cmd_status, hwd->data_status,
+		         hwd->data_error);
+		dev_info(dev, "\n");
+
+		descr = descr->next;
+	} while (descr != start);
+#endif
+
+}
+
+/**
+ * spider_net_resync_head_ptr - Advance head ptr past empty descrs
+ *
+ * If the driver fails to keep up and empty the queue, then the
+ * hardware wil run out of room to put incoming packets. This
+ * will cause the hardware to skip descrs that are full (instead
+ * of halting/retrying). Thus, once the driver runs, it wil need
+ * to "catch up" to where the hardware chain pointer is at.
+ */
+static void spider_net_resync_head_ptr(struct spider_net_card *card)
+{
+	unsigned long flags;
+	struct spider_net_descr_chain *chain = &card->rx_chain;
+	struct spider_net_descr *descr;
+	int i, status;
+
+	/* Advance head pointer past any empty descrs */
+	descr = chain->head;
+	status = spider_net_get_descr_status(descr->hwdescr);
+
+	if (status == SPIDER_NET_DESCR_NOT_IN_USE)
+		return;
+
+	spin_lock_irqsave(&chain->lock, flags);
+
+	descr = chain->head;
+	status = spider_net_get_descr_status(descr->hwdescr);
+	for (i=0; i<chain->num_desc; i++) {
+		if (status != SPIDER_NET_DESCR_CARDOWNED) break;
+		descr = descr->next;
+		status = spider_net_get_descr_status(descr->hwdescr);
+	}
+	chain->head = descr;
+
+	spin_unlock_irqrestore(&chain->lock, flags);
+}
+
+static int spider_net_resync_tail_ptr(struct spider_net_card *card)
+{
+	struct spider_net_descr_chain *chain = &card->rx_chain;
+	struct spider_net_descr *descr;
+	int i, status;
+
+	/* Advance tail pointer past any empty and reaped descrs */
+	descr = chain->tail;
+	status = spider_net_get_descr_status(descr->hwdescr);
+
+	for (i=0; i<chain->num_desc; i++) {
+		if ((status != SPIDER_NET_DESCR_CARDOWNED) &&
+		    (status != SPIDER_NET_DESCR_NOT_IN_USE)) break;
+		descr = descr->next;
+		status = spider_net_get_descr_status(descr->hwdescr);
+	}
+	chain->tail = descr;
+
+	if ((i == chain->num_desc) || (i == 0))
+		return 1;
+	return 0;
+}
+
+/**
+ * spider_net_decode_one_descr - processes an RX descriptor
+ * @card: card structure
+ *
+ * Returns 1 if a packet has been sent to the stack, otherwise 0.
+ *
+ * Processes an RX descriptor by iommu-unmapping the data buffer
+ * and passing the packet up to the stack. This function is called
+ * in softirq context, e.g. either bottom half from interrupt or
+ * NAPI polling context.
+ */
+static int
+spider_net_decode_one_descr(struct spider_net_card *card)
+{
+	struct net_device *dev = card->netdev;
+	struct spider_net_descr_chain *chain = &card->rx_chain;
+	struct spider_net_descr *descr = chain->tail;
+	struct spider_net_hw_descr *hwdescr = descr->hwdescr;
+	u32 hw_buf_addr;
+	int status;
+
+	status = spider_net_get_descr_status(hwdescr);
+
+	/* Nothing in the descriptor, or ring must be empty */
+	if ((status == SPIDER_NET_DESCR_CARDOWNED) ||
+	    (status == SPIDER_NET_DESCR_NOT_IN_USE))
+		return 0;
+
+	/* descriptor definitively used -- move on tail */
+	chain->tail = descr->next;
+
+	/* unmap descriptor */
+	hw_buf_addr = hwdescr->buf_addr;
+	hwdescr->buf_addr = 0xffffffff;
+	pci_unmap_single(card->pdev, hw_buf_addr,
+			SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
+
+	if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) ||
+	     (status == SPIDER_NET_DESCR_PROTECTION_ERROR) ||
+	     (status == SPIDER_NET_DESCR_FORCE_END) ) {
+		if (netif_msg_rx_err(card))
+			dev_err(&dev->dev,
+			       "dropping RX descriptor with state %d\n", status);
+		dev->stats.rx_dropped++;
+		goto bad_desc;
+	}
+
+	if ( (status != SPIDER_NET_DESCR_COMPLETE) &&
+	     (status != SPIDER_NET_DESCR_FRAME_END) ) {
+		if (netif_msg_rx_err(card))
+			dev_err(&card->netdev->dev,
+			       "RX descriptor with unknown state %d\n", status);
+		card->spider_stats.rx_desc_unk_state++;
+		goto bad_desc;
+	}
+
+	/* The cases we'll throw away the packet immediately */
+	if (hwdescr->data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
+		if (netif_msg_rx_err(card))
+			dev_err(&card->netdev->dev,
+			       "error in received descriptor found, "
+			       "data_status=x%08x, data_error=x%08x\n",
+			       hwdescr->data_status, hwdescr->data_error);
+		goto bad_desc;
+	}
+
+	if (hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_BAD_STATUS) {
+		dev_err(&card->netdev->dev, "bad status, cmd_status=x%08x\n",
+			       hwdescr->dmac_cmd_status);
+		pr_err("buf_addr=x%08x\n", hw_buf_addr);
+		pr_err("buf_size=x%08x\n", hwdescr->buf_size);
+		pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr);
+		pr_err("result_size=x%08x\n", hwdescr->result_size);
+		pr_err("valid_size=x%08x\n", hwdescr->valid_size);
+		pr_err("data_status=x%08x\n", hwdescr->data_status);
+		pr_err("data_error=x%08x\n", hwdescr->data_error);
+		pr_err("which=%ld\n", descr - card->rx_chain.ring);
+
+		card->spider_stats.rx_desc_error++;
+		goto bad_desc;
+	}
+
+	/* Ok, we've got a packet in descr */
+	spider_net_pass_skb_up(descr, card);
+	descr->skb = NULL;
+	hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
+	return 1;
+
+bad_desc:
+	if (netif_msg_rx_err(card))
+		show_rx_chain(card);
+	dev_kfree_skb_irq(descr->skb);
+	descr->skb = NULL;
+	hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
+	return 0;
+}
+
+/**
+ * spider_net_poll - NAPI poll function called by the stack to return packets
+ * @netdev: interface device structure
+ * @budget: number of packets we can pass to the stack at most
+ *
+ * returns 0 if no more packets available to the driver/stack. Returns 1,
+ * if the quota is exceeded, but the driver has still packets.
+ *
+ * spider_net_poll returns all packets from the rx descriptors to the stack
+ * (using netif_receive_skb). If all/enough packets are up, the driver
+ * reenables interrupts and returns 0. If not, 1 is returned.
+ */
+static int spider_net_poll(struct napi_struct *napi, int budget)
+{
+	struct spider_net_card *card = container_of(napi, struct spider_net_card, napi);
+	int packets_done = 0;
+
+	while (packets_done < budget) {
+		if (!spider_net_decode_one_descr(card))
+			break;
+
+		packets_done++;
+	}
+
+	if ((packets_done == 0) && (card->num_rx_ints != 0)) {
+		if (!spider_net_resync_tail_ptr(card))
+			packets_done = budget;
+		spider_net_resync_head_ptr(card);
+	}
+	card->num_rx_ints = 0;
+
+	spider_net_refill_rx_chain(card);
+	spider_net_enable_rxdmac(card);
+
+	spider_net_cleanup_tx_ring(&card->tx_timer);
+
+	/* if all packets are in the stack, enable interrupts and return 0 */
+	/* if not, return 1 */
+	if (packets_done < budget) {
+		napi_complete_done(napi, packets_done);
+		spider_net_rx_irq_on(card);
+		card->ignore_rx_ramfull = 0;
+	}
+
+	return packets_done;
+}
+
+/**
+ * spider_net_set_mac - sets the MAC of an interface
+ * @netdev: interface device structure
+ * @ptr: pointer to new MAC address
+ *
+ * Returns 0 on success, <0 on failure. Currently, we don't support this
+ * and will always return EOPNOTSUPP.
+ */
+static int
+spider_net_set_mac(struct net_device *netdev, void *p)
+{
+	struct spider_net_card *card = netdev_priv(netdev);
+	u32 macl, macu, regvalue;
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(netdev->dev_addr, addr->sa_data, ETH_ALEN);
+
+	/* switch off GMACTPE and GMACRPE */
+	regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
+	regvalue &= ~((1 << 5) | (1 << 6));
+	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
+
+	/* write mac */
+	macu = (netdev->dev_addr[0]<<24) + (netdev->dev_addr[1]<<16) +
+		(netdev->dev_addr[2]<<8) + (netdev->dev_addr[3]);
+	macl = (netdev->dev_addr[4]<<8) + (netdev->dev_addr[5]);
+	spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu);
+	spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl);
+
+	/* switch GMACTPE and GMACRPE back on */
+	regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
+	regvalue |= ((1 << 5) | (1 << 6));
+	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
+
+	spider_net_set_promisc(card);
+
+	return 0;
+}
+
+/**
+ * spider_net_link_reset
+ * @netdev: net device structure
+ *
+ * This is called when the PHY_LINK signal is asserted. For the blade this is
+ * not connected so we should never get here.
+ *
+ */
+static void
+spider_net_link_reset(struct net_device *netdev)
+{
+
+	struct spider_net_card *card = netdev_priv(netdev);
+
+	del_timer_sync(&card->aneg_timer);
+
+	/* clear interrupt, block further interrupts */
+	spider_net_write_reg(card, SPIDER_NET_GMACST,
+			     spider_net_read_reg(card, SPIDER_NET_GMACST));
+	spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
+
+	/* reset phy and setup aneg */
+	card->aneg_count = 0;
+	card->medium = BCM54XX_COPPER;
+	spider_net_setup_aneg(card);
+	mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
+
+}
+
+/**
+ * spider_net_handle_error_irq - handles errors raised by an interrupt
+ * @card: card structure
+ * @status_reg: interrupt status register 0 (GHIINT0STS)
+ *
+ * spider_net_handle_error_irq treats or ignores all error conditions
+ * found when an interrupt is presented
+ */
+static void
+spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg,
+			    u32 error_reg1, u32 error_reg2)
+{
+	u32 i;
+	int show_error = 1;
+
+	/* check GHIINT0STS ************************************/
+	if (status_reg)
+		for (i = 0; i < 32; i++)
+			if (status_reg & (1<<i))
+				switch (i)
+	{
+	/* let error_reg1 and error_reg2 evaluation decide, what to do
+	case SPIDER_NET_PHYINT:
+	case SPIDER_NET_GMAC2INT:
+	case SPIDER_NET_GMAC1INT:
+	case SPIDER_NET_GFIFOINT:
+	case SPIDER_NET_DMACINT:
+	case SPIDER_NET_GSYSINT:
+		break; */
+
+	case SPIDER_NET_GIPSINT:
+		show_error = 0;
+		break;
+
+	case SPIDER_NET_GPWOPCMPINT:
+		/* PHY write operation completed */
+		show_error = 0;
+		break;
+	case SPIDER_NET_GPROPCMPINT:
+		/* PHY read operation completed */
+		/* we don't use semaphores, as we poll for the completion
+		 * of the read operation in spider_net_read_phy. Should take
+		 * about 50 us */
+		show_error = 0;
+		break;
+	case SPIDER_NET_GPWFFINT:
+		/* PHY command queue full */
+		if (netif_msg_intr(card))
+			dev_err(&card->netdev->dev, "PHY write queue full\n");
+		show_error = 0;
+		break;
+
+	/* case SPIDER_NET_GRMDADRINT: not used. print a message */
+	/* case SPIDER_NET_GRMARPINT: not used. print a message */
+	/* case SPIDER_NET_GRMMPINT: not used. print a message */
+
+	case SPIDER_NET_GDTDEN0INT:
+		/* someone has set TX_DMA_EN to 0 */
+		show_error = 0;
+		break;
+
+	case SPIDER_NET_GDDDEN0INT: /* fallthrough */
+	case SPIDER_NET_GDCDEN0INT: /* fallthrough */
+	case SPIDER_NET_GDBDEN0INT: /* fallthrough */
+	case SPIDER_NET_GDADEN0INT:
+		/* someone has set RX_DMA_EN to 0 */
+		show_error = 0;
+		break;
+
+	/* RX interrupts */
+	case SPIDER_NET_GDDFDCINT:
+	case SPIDER_NET_GDCFDCINT:
+	case SPIDER_NET_GDBFDCINT:
+	case SPIDER_NET_GDAFDCINT:
+	/* case SPIDER_NET_GDNMINT: not used. print a message */
+	/* case SPIDER_NET_GCNMINT: not used. print a message */
+	/* case SPIDER_NET_GBNMINT: not used. print a message */
+	/* case SPIDER_NET_GANMINT: not used. print a message */
+	/* case SPIDER_NET_GRFNMINT: not used. print a message */
+		show_error = 0;
+		break;
+
+	/* TX interrupts */
+	case SPIDER_NET_GDTFDCINT:
+		show_error = 0;
+		break;
+	case SPIDER_NET_GTTEDINT:
+		show_error = 0;
+		break;
+	case SPIDER_NET_GDTDCEINT:
+		/* chain end. If a descriptor should be sent, kick off
+		 * tx dma
+		if (card->tx_chain.tail != card->tx_chain.head)
+			spider_net_kick_tx_dma(card);
+		*/
+		show_error = 0;
+		break;
+
+	/* case SPIDER_NET_G1TMCNTINT: not used. print a message */
+	/* case SPIDER_NET_GFREECNTINT: not used. print a message */
+	}
+
+	/* check GHIINT1STS ************************************/
+	if (error_reg1)
+		for (i = 0; i < 32; i++)
+			if (error_reg1 & (1<<i))
+				switch (i)
+	{
+	case SPIDER_NET_GTMFLLINT:
+		/* TX RAM full may happen on a usual case.
+		 * Logging is not needed. */
+		show_error = 0;
+		break;
+	case SPIDER_NET_GRFDFLLINT: /* fallthrough */
+	case SPIDER_NET_GRFCFLLINT: /* fallthrough */
+	case SPIDER_NET_GRFBFLLINT: /* fallthrough */
+	case SPIDER_NET_GRFAFLLINT: /* fallthrough */
+	case SPIDER_NET_GRMFLLINT:
+		/* Could happen when rx chain is full */
+		if (card->ignore_rx_ramfull == 0) {
+			card->ignore_rx_ramfull = 1;
+			spider_net_resync_head_ptr(card);
+			spider_net_refill_rx_chain(card);
+			spider_net_enable_rxdmac(card);
+			card->num_rx_ints ++;
+			napi_schedule(&card->napi);
+		}
+		show_error = 0;
+		break;
+
+	/* case SPIDER_NET_GTMSHTINT: problem, print a message */
+	case SPIDER_NET_GDTINVDINT:
+		/* allrighty. tx from previous descr ok */
+		show_error = 0;
+		break;
+
+	/* chain end */
+	case SPIDER_NET_GDDDCEINT: /* fallthrough */
+	case SPIDER_NET_GDCDCEINT: /* fallthrough */
+	case SPIDER_NET_GDBDCEINT: /* fallthrough */
+	case SPIDER_NET_GDADCEINT:
+		spider_net_resync_head_ptr(card);
+		spider_net_refill_rx_chain(card);
+		spider_net_enable_rxdmac(card);
+		card->num_rx_ints ++;
+		napi_schedule(&card->napi);
+		show_error = 0;
+		break;
+
+	/* invalid descriptor */
+	case SPIDER_NET_GDDINVDINT: /* fallthrough */
+	case SPIDER_NET_GDCINVDINT: /* fallthrough */
+	case SPIDER_NET_GDBINVDINT: /* fallthrough */
+	case SPIDER_NET_GDAINVDINT:
+		/* Could happen when rx chain is full */
+		spider_net_resync_head_ptr(card);
+		spider_net_refill_rx_chain(card);
+		spider_net_enable_rxdmac(card);
+		card->num_rx_ints ++;
+		napi_schedule(&card->napi);
+		show_error = 0;
+		break;
+
+	/* case SPIDER_NET_GDTRSERINT: problem, print a message */
+	/* case SPIDER_NET_GDDRSERINT: problem, print a message */
+	/* case SPIDER_NET_GDCRSERINT: problem, print a message */
+	/* case SPIDER_NET_GDBRSERINT: problem, print a message */
+	/* case SPIDER_NET_GDARSERINT: problem, print a message */
+	/* case SPIDER_NET_GDSERINT: problem, print a message */
+	/* case SPIDER_NET_GDTPTERINT: problem, print a message */
+	/* case SPIDER_NET_GDDPTERINT: problem, print a message */
+	/* case SPIDER_NET_GDCPTERINT: problem, print a message */
+	/* case SPIDER_NET_GDBPTERINT: problem, print a message */
+	/* case SPIDER_NET_GDAPTERINT: problem, print a message */
+	default:
+		show_error = 1;
+		break;
+	}
+
+	/* check GHIINT2STS ************************************/
+	if (error_reg2)
+		for (i = 0; i < 32; i++)
+			if (error_reg2 & (1<<i))
+				switch (i)
+	{
+	/* there is nothing we can (want  to) do at this time. Log a
+	 * message, we can switch on and off the specific values later on
+	case SPIDER_NET_GPROPERINT:
+	case SPIDER_NET_GMCTCRSNGINT:
+	case SPIDER_NET_GMCTLCOLINT:
+	case SPIDER_NET_GMCTTMOTINT:
+	case SPIDER_NET_GMCRCAERINT:
+	case SPIDER_NET_GMCRCALERINT:
+	case SPIDER_NET_GMCRALNERINT:
+	case SPIDER_NET_GMCROVRINT:
+	case SPIDER_NET_GMCRRNTINT:
+	case SPIDER_NET_GMCRRXERINT:
+	case SPIDER_NET_GTITCSERINT:
+	case SPIDER_NET_GTIFMTERINT:
+	case SPIDER_NET_GTIPKTRVKINT:
+	case SPIDER_NET_GTISPINGINT:
+	case SPIDER_NET_GTISADNGINT:
+	case SPIDER_NET_GTISPDNGINT:
+	case SPIDER_NET_GRIFMTERINT:
+	case SPIDER_NET_GRIPKTRVKINT:
+	case SPIDER_NET_GRISPINGINT:
+	case SPIDER_NET_GRISADNGINT:
+	case SPIDER_NET_GRISPDNGINT:
+		break;
+	*/
+		default:
+			break;
+	}
+
+	if ((show_error) && (netif_msg_intr(card)) && net_ratelimit())
+		dev_err(&card->netdev->dev, "Error interrupt, GHIINT0STS = 0x%08x, "
+		       "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
+		       status_reg, error_reg1, error_reg2);
+
+	/* clear interrupt sources */
+	spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1);
+	spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2);
+}
+
+/**
+ * spider_net_interrupt - interrupt handler for spider_net
+ * @irq: interrupt number
+ * @ptr: pointer to net_device
+ *
+ * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
+ * interrupt found raised by card.
+ *
+ * This is the interrupt handler, that turns off
+ * interrupts for this device and makes the stack poll the driver
+ */
+static irqreturn_t
+spider_net_interrupt(int irq, void *ptr)
+{
+	struct net_device *netdev = ptr;
+	struct spider_net_card *card = netdev_priv(netdev);
+	u32 status_reg, error_reg1, error_reg2;
+
+	status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS);
+	error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS);
+	error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS);
+
+	if (!(status_reg & SPIDER_NET_INT0_MASK_VALUE) &&
+	    !(error_reg1 & SPIDER_NET_INT1_MASK_VALUE) &&
+	    !(error_reg2 & SPIDER_NET_INT2_MASK_VALUE))
+		return IRQ_NONE;
+
+	if (status_reg & SPIDER_NET_RXINT ) {
+		spider_net_rx_irq_off(card);
+		napi_schedule(&card->napi);
+		card->num_rx_ints ++;
+	}
+	if (status_reg & SPIDER_NET_TXINT)
+		napi_schedule(&card->napi);
+
+	if (status_reg & SPIDER_NET_LINKINT)
+		spider_net_link_reset(netdev);
+
+	if (status_reg & SPIDER_NET_ERRINT )
+		spider_net_handle_error_irq(card, status_reg,
+					    error_reg1, error_reg2);
+
+	/* clear interrupt sources */
+	spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * spider_net_poll_controller - artificial interrupt for netconsole etc.
+ * @netdev: interface device structure
+ *
+ * see Documentation/networking/netconsole.txt
+ */
+static void
+spider_net_poll_controller(struct net_device *netdev)
+{
+	disable_irq(netdev->irq);
+	spider_net_interrupt(netdev->irq, netdev);
+	enable_irq(netdev->irq);
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+/**
+ * spider_net_enable_interrupts - enable interrupts
+ * @card: card structure
+ *
+ * spider_net_enable_interrupt enables several interrupts
+ */
+static void
+spider_net_enable_interrupts(struct spider_net_card *card)
+{
+	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
+			     SPIDER_NET_INT0_MASK_VALUE);
+	spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
+			     SPIDER_NET_INT1_MASK_VALUE);
+	spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
+			     SPIDER_NET_INT2_MASK_VALUE);
+}
+
+/**
+ * spider_net_disable_interrupts - disable interrupts
+ * @card: card structure
+ *
+ * spider_net_disable_interrupts disables all the interrupts
+ */
+static void
+spider_net_disable_interrupts(struct spider_net_card *card)
+{
+	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
+	spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
+	spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
+	spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
+}
+
+/**
+ * spider_net_init_card - initializes the card
+ * @card: card structure
+ *
+ * spider_net_init_card initializes the card so that other registers can
+ * be used
+ */
+static void
+spider_net_init_card(struct spider_net_card *card)
+{
+	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
+			     SPIDER_NET_CKRCTRL_STOP_VALUE);
+
+	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
+			     SPIDER_NET_CKRCTRL_RUN_VALUE);
+
+	/* trigger ETOMOD signal */
+	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
+		spider_net_read_reg(card, SPIDER_NET_GMACOPEMD) | 0x4);
+
+	spider_net_disable_interrupts(card);
+}
+
+/**
+ * spider_net_enable_card - enables the card by setting all kinds of regs
+ * @card: card structure
+ *
+ * spider_net_enable_card sets a lot of SMMIO registers to enable the device
+ */
+static void
+spider_net_enable_card(struct spider_net_card *card)
+{
+	int i;
+	/* the following array consists of (register),(value) pairs
+	 * that are set in this function. A register of 0 ends the list */
+	u32 regs[][2] = {
+		{ SPIDER_NET_GRESUMINTNUM, 0 },
+		{ SPIDER_NET_GREINTNUM, 0 },
+
+		/* set interrupt frame number registers */
+		/* clear the single DMA engine registers first */
+		{ SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
+		{ SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
+		{ SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
+		{ SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
+		/* then set, what we really need */
+		{ SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE },
+
+		/* timer counter registers and stuff */
+		{ SPIDER_NET_GFREECNNUM, 0 },
+		{ SPIDER_NET_GONETIMENUM, 0 },
+		{ SPIDER_NET_GTOUTFRMNUM, 0 },
+
+		/* RX mode setting */
+		{ SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE },
+		/* TX mode setting */
+		{ SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE },
+		/* IPSEC mode setting */
+		{ SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE },
+
+		{ SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
+
+		{ SPIDER_NET_GMRWOLCTRL, 0 },
+		{ SPIDER_NET_GTESTMD, 0x10000000 },
+		{ SPIDER_NET_GTTQMSK, 0x00400040 },
+
+		{ SPIDER_NET_GMACINTEN, 0 },
+
+		/* flow control stuff */
+		{ SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE },
+		{ SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE },
+
+		{ SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE },
+		{ 0, 0}
+	};
+
+	i = 0;
+	while (regs[i][0]) {
+		spider_net_write_reg(card, regs[i][0], regs[i][1]);
+		i++;
+	}
+
+	/* clear unicast filter table entries 1 to 14 */
+	for (i = 1; i <= 14; i++) {
+		spider_net_write_reg(card,
+				     SPIDER_NET_GMRUAFILnR + i * 8,
+				     0x00080000);
+		spider_net_write_reg(card,
+				     SPIDER_NET_GMRUAFILnR + i * 8 + 4,
+				     0x00000000);
+	}
+
+	spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000);
+
+	spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
+
+	/* set chain tail address for RX chains and
+	 * enable DMA */
+	spider_net_enable_rxchtails(card);
+	spider_net_enable_rxdmac(card);
+
+	spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE);
+
+	spider_net_write_reg(card, SPIDER_NET_GMACLENLMT,
+			     SPIDER_NET_LENLMT_VALUE);
+	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
+			     SPIDER_NET_OPMODE_VALUE);
+
+	spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
+			     SPIDER_NET_GDTBSTA);
+}
+
+/**
+ * spider_net_download_firmware - loads firmware into the adapter
+ * @card: card structure
+ * @firmware_ptr: pointer to firmware data
+ *
+ * spider_net_download_firmware loads the firmware data into the
+ * adapter. It assumes the length etc. to be allright.
+ */
+static int
+spider_net_download_firmware(struct spider_net_card *card,
+			     const void *firmware_ptr)
+{
+	int sequencer, i;
+	const u32 *fw_ptr = firmware_ptr;
+
+	/* stop sequencers */
+	spider_net_write_reg(card, SPIDER_NET_GSINIT,
+			     SPIDER_NET_STOP_SEQ_VALUE);
+
+	for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
+	     sequencer++) {
+		spider_net_write_reg(card,
+				     SPIDER_NET_GSnPRGADR + sequencer * 8, 0);
+		for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
+			spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
+					     sequencer * 8, *fw_ptr);
+			fw_ptr++;
+		}
+	}
+
+	if (spider_net_read_reg(card, SPIDER_NET_GSINIT))
+		return -EIO;
+
+	spider_net_write_reg(card, SPIDER_NET_GSINIT,
+			     SPIDER_NET_RUN_SEQ_VALUE);
+
+	return 0;
+}
+
+/**
+ * spider_net_init_firmware - reads in firmware parts
+ * @card: card structure
+ *
+ * Returns 0 on success, <0 on failure
+ *
+ * spider_net_init_firmware opens the sequencer firmware and does some basic
+ * checks. This function opens and releases the firmware structure. A call
+ * to download the firmware is performed before the release.
+ *
+ * Firmware format
+ * ===============
+ * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
+ * the program for each sequencer. Use the command
+ *    tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt              \
+ *         Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt   \
+ *         Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
+ *
+ * to generate spider_fw.bin, if you have sequencer programs with something
+ * like the following contents for each sequencer:
+ *    <ONE LINE COMMENT>
+ *    <FIRST 4-BYTES-WORD FOR SEQUENCER>
+ *    <SECOND 4-BYTES-WORD FOR SEQUENCER>
+ *     ...
+ *    <1024th 4-BYTES-WORD FOR SEQUENCER>
+ */
+static int
+spider_net_init_firmware(struct spider_net_card *card)
+{
+	struct firmware *firmware = NULL;
+	struct device_node *dn;
+	const u8 *fw_prop = NULL;
+	int err = -ENOENT;
+	int fw_size;
+
+	if (request_firmware((const struct firmware **)&firmware,
+			     SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) {
+		if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) &&
+		     netif_msg_probe(card) ) {
+			dev_err(&card->netdev->dev,
+			       "Incorrect size of spidernet firmware in " \
+			       "filesystem. Looking in host firmware...\n");
+			goto try_host_fw;
+		}
+		err = spider_net_download_firmware(card, firmware->data);
+
+		release_firmware(firmware);
+		if (err)
+			goto try_host_fw;
+
+		goto done;
+	}
+
+try_host_fw:
+	dn = pci_device_to_OF_node(card->pdev);
+	if (!dn)
+		goto out_err;
+
+	fw_prop = of_get_property(dn, "firmware", &fw_size);
+	if (!fw_prop)
+		goto out_err;
+
+	if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) &&
+	     netif_msg_probe(card) ) {
+		dev_err(&card->netdev->dev,
+		       "Incorrect size of spidernet firmware in host firmware\n");
+		goto done;
+	}
+
+	err = spider_net_download_firmware(card, fw_prop);
+
+done:
+	return err;
+out_err:
+	if (netif_msg_probe(card))
+		dev_err(&card->netdev->dev,
+		       "Couldn't find spidernet firmware in filesystem " \
+		       "or host firmware\n");
+	return err;
+}
+
+/**
+ * spider_net_open - called upon ifonfig up
+ * @netdev: interface device structure
+ *
+ * returns 0 on success, <0 on failure
+ *
+ * spider_net_open allocates all the descriptors and memory needed for
+ * operation, sets up multicast list and enables interrupts
+ */
+int
+spider_net_open(struct net_device *netdev)
+{
+	struct spider_net_card *card = netdev_priv(netdev);
+	int result;
+
+	result = spider_net_init_firmware(card);
+	if (result)
+		goto init_firmware_failed;
+
+	/* start probing with copper */
+	card->aneg_count = 0;
+	card->medium = BCM54XX_COPPER;
+	spider_net_setup_aneg(card);
+	if (card->phy.def->phy_id)
+		mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
+
+	result = spider_net_init_chain(card, &card->tx_chain);
+	if (result)
+		goto alloc_tx_failed;
+	card->low_watermark = NULL;
+
+	result = spider_net_init_chain(card, &card->rx_chain);
+	if (result)
+		goto alloc_rx_failed;
+
+	/* Allocate rx skbs */
+	result = spider_net_alloc_rx_skbs(card);
+	if (result)
+		goto alloc_skbs_failed;
+
+	spider_net_set_multi(netdev);
+
+	/* further enhancement: setup hw vlan, if needed */
+
+	result = -EBUSY;
+	if (request_irq(netdev->irq, spider_net_interrupt,
+			     IRQF_SHARED, netdev->name, netdev))
+		goto register_int_failed;
+
+	spider_net_enable_card(card);
+
+	netif_start_queue(netdev);
+	netif_carrier_on(netdev);
+	napi_enable(&card->napi);
+
+	spider_net_enable_interrupts(card);
+
+	return 0;
+
+register_int_failed:
+	spider_net_free_rx_chain_contents(card);
+alloc_skbs_failed:
+	spider_net_free_chain(card, &card->rx_chain);
+alloc_rx_failed:
+	spider_net_free_chain(card, &card->tx_chain);
+alloc_tx_failed:
+	del_timer_sync(&card->aneg_timer);
+init_firmware_failed:
+	return result;
+}
+
+/**
+ * spider_net_link_phy
+ * @data: used for pointer to card structure
+ *
+ */
+static void spider_net_link_phy(struct timer_list *t)
+{
+	struct spider_net_card *card = from_timer(card, t, aneg_timer);
+	struct mii_phy *phy = &card->phy;
+
+	/* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */
+	if (card->aneg_count > SPIDER_NET_ANEG_TIMEOUT) {
+
+		pr_debug("%s: link is down trying to bring it up\n",
+			 card->netdev->name);
+
+		switch (card->medium) {
+		case BCM54XX_COPPER:
+			/* enable fiber with autonegotiation first */
+			if (phy->def->ops->enable_fiber)
+				phy->def->ops->enable_fiber(phy, 1);
+			card->medium = BCM54XX_FIBER;
+			break;
+
+		case BCM54XX_FIBER:
+			/* fiber didn't come up, try to disable fiber autoneg */
+			if (phy->def->ops->enable_fiber)
+				phy->def->ops->enable_fiber(phy, 0);
+			card->medium = BCM54XX_UNKNOWN;
+			break;
+
+		case BCM54XX_UNKNOWN:
+			/* copper, fiber with and without failed,
+			 * retry from beginning */
+			spider_net_setup_aneg(card);
+			card->medium = BCM54XX_COPPER;
+			break;
+		}
+
+		card->aneg_count = 0;
+		mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
+		return;
+	}
+
+	/* link still not up, try again later */
+	if (!(phy->def->ops->poll_link(phy))) {
+		card->aneg_count++;
+		mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
+		return;
+	}
+
+	/* link came up, get abilities */
+	phy->def->ops->read_link(phy);
+
+	spider_net_write_reg(card, SPIDER_NET_GMACST,
+			     spider_net_read_reg(card, SPIDER_NET_GMACST));
+	spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0x4);
+
+	if (phy->speed == 1000)
+		spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0x00000001);
+	else
+		spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0);
+
+	card->aneg_count = 0;
+
+	pr_info("%s: link up, %i Mbps, %s-duplex %sautoneg.\n",
+		card->netdev->name, phy->speed,
+		phy->duplex == 1 ? "Full" : "Half",
+		phy->autoneg == 1 ? "" : "no ");
+}
+
+/**
+ * spider_net_setup_phy - setup PHY
+ * @card: card structure
+ *
+ * returns 0 on success, <0 on failure
+ *
+ * spider_net_setup_phy is used as part of spider_net_probe.
+ **/
+static int
+spider_net_setup_phy(struct spider_net_card *card)
+{
+	struct mii_phy *phy = &card->phy;
+
+	spider_net_write_reg(card, SPIDER_NET_GDTDMASEL,
+			     SPIDER_NET_DMASEL_VALUE);
+	spider_net_write_reg(card, SPIDER_NET_GPCCTRL,
+			     SPIDER_NET_PHY_CTRL_VALUE);
+
+	phy->dev = card->netdev;
+	phy->mdio_read = spider_net_read_phy;
+	phy->mdio_write = spider_net_write_phy;
+
+	for (phy->mii_id = 1; phy->mii_id <= 31; phy->mii_id++) {
+		unsigned short id;
+		id = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
+		if (id != 0x0000 && id != 0xffff) {
+			if (!sungem_phy_probe(phy, phy->mii_id)) {
+				pr_info("Found %s.\n", phy->def->name);
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * spider_net_workaround_rxramfull - work around firmware bug
+ * @card: card structure
+ *
+ * no return value
+ **/
+static void
+spider_net_workaround_rxramfull(struct spider_net_card *card)
+{
+	int i, sequencer = 0;
+
+	/* cancel reset */
+	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
+			     SPIDER_NET_CKRCTRL_RUN_VALUE);
+
+	/* empty sequencer data */
+	for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
+	     sequencer++) {
+		spider_net_write_reg(card, SPIDER_NET_GSnPRGADR +
+				     sequencer * 8, 0x0);
+		for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
+			spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
+					     sequencer * 8, 0x0);
+		}
+	}
+
+	/* set sequencer operation */
+	spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe);
+
+	/* reset */
+	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
+			     SPIDER_NET_CKRCTRL_STOP_VALUE);
+}
+
+/**
+ * spider_net_stop - called upon ifconfig down
+ * @netdev: interface device structure
+ *
+ * always returns 0
+ */
+int
+spider_net_stop(struct net_device *netdev)
+{
+	struct spider_net_card *card = netdev_priv(netdev);
+
+	napi_disable(&card->napi);
+	netif_carrier_off(netdev);
+	netif_stop_queue(netdev);
+	del_timer_sync(&card->tx_timer);
+	del_timer_sync(&card->aneg_timer);
+
+	spider_net_disable_interrupts(card);
+
+	free_irq(netdev->irq, netdev);
+
+	spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
+			     SPIDER_NET_DMA_TX_FEND_VALUE);
+
+	/* turn off DMA, force end */
+	spider_net_disable_rxdmac(card);
+
+	/* release chains */
+	spider_net_release_tx_chain(card, 1);
+	spider_net_free_rx_chain_contents(card);
+
+	spider_net_free_chain(card, &card->tx_chain);
+	spider_net_free_chain(card, &card->rx_chain);
+
+	return 0;
+}
+
+/**
+ * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
+ * function (to be called not under interrupt status)
+ * @data: data, is interface device structure
+ *
+ * called as task when tx hangs, resets interface (if interface is up)
+ */
+static void
+spider_net_tx_timeout_task(struct work_struct *work)
+{
+	struct spider_net_card *card =
+		container_of(work, struct spider_net_card, tx_timeout_task);
+	struct net_device *netdev = card->netdev;
+
+	if (!(netdev->flags & IFF_UP))
+		goto out;
+
+	netif_device_detach(netdev);
+	spider_net_stop(netdev);
+
+	spider_net_workaround_rxramfull(card);
+	spider_net_init_card(card);
+
+	if (spider_net_setup_phy(card))
+		goto out;
+
+	spider_net_open(netdev);
+	spider_net_kick_tx_dma(card);
+	netif_device_attach(netdev);
+
+out:
+	atomic_dec(&card->tx_timeout_task_counter);
+}
+
+/**
+ * spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
+ * @netdev: interface device structure
+ *
+ * called, if tx hangs. Schedules a task that resets the interface
+ */
+static void
+spider_net_tx_timeout(struct net_device *netdev)
+{
+	struct spider_net_card *card;
+
+	card = netdev_priv(netdev);
+	atomic_inc(&card->tx_timeout_task_counter);
+	if (netdev->flags & IFF_UP)
+		schedule_work(&card->tx_timeout_task);
+	else
+		atomic_dec(&card->tx_timeout_task_counter);
+	card->spider_stats.tx_timeouts++;
+}
+
+static const struct net_device_ops spider_net_ops = {
+	.ndo_open		= spider_net_open,
+	.ndo_stop		= spider_net_stop,
+	.ndo_start_xmit		= spider_net_xmit,
+	.ndo_set_rx_mode	= spider_net_set_multi,
+	.ndo_set_mac_address	= spider_net_set_mac,
+	.ndo_do_ioctl		= spider_net_do_ioctl,
+	.ndo_tx_timeout		= spider_net_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	/* HW VLAN */
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	/* poll controller */
+	.ndo_poll_controller	= spider_net_poll_controller,
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+};
+
+/**
+ * spider_net_setup_netdev_ops - initialization of net_device operations
+ * @netdev: net_device structure
+ *
+ * fills out function pointers in the net_device structure
+ */
+static void
+spider_net_setup_netdev_ops(struct net_device *netdev)
+{
+	netdev->netdev_ops = &spider_net_ops;
+	netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT;
+	/* ethtool ops */
+	netdev->ethtool_ops = &spider_net_ethtool_ops;
+}
+
+/**
+ * spider_net_setup_netdev - initialization of net_device
+ * @card: card structure
+ *
+ * Returns 0 on success or <0 on failure
+ *
+ * spider_net_setup_netdev initializes the net_device structure
+ **/
+static int
+spider_net_setup_netdev(struct spider_net_card *card)
+{
+	int result;
+	struct net_device *netdev = card->netdev;
+	struct device_node *dn;
+	struct sockaddr addr;
+	const u8 *mac;
+
+	SET_NETDEV_DEV(netdev, &card->pdev->dev);
+
+	pci_set_drvdata(card->pdev, netdev);
+
+	timer_setup(&card->tx_timer, spider_net_cleanup_tx_ring, 0);
+	netdev->irq = card->pdev->irq;
+
+	card->aneg_count = 0;
+	timer_setup(&card->aneg_timer, spider_net_link_phy, 0);
+
+	netif_napi_add(netdev, &card->napi,
+		       spider_net_poll, SPIDER_NET_NAPI_WEIGHT);
+
+	spider_net_setup_netdev_ops(netdev);
+
+	netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
+	if (SPIDER_NET_RX_CSUM_DEFAULT)
+		netdev->features |= NETIF_F_RXCSUM;
+	netdev->features |= NETIF_F_IP_CSUM | NETIF_F_LLTX;
+	/* some time: NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
+	 *		NETIF_F_HW_VLAN_CTAG_FILTER */
+
+	/* MTU range: 64 - 2294 */
+	netdev->min_mtu = SPIDER_NET_MIN_MTU;
+	netdev->max_mtu = SPIDER_NET_MAX_MTU;
+
+	netdev->irq = card->pdev->irq;
+	card->num_rx_ints = 0;
+	card->ignore_rx_ramfull = 0;
+
+	dn = pci_device_to_OF_node(card->pdev);
+	if (!dn)
+		return -EIO;
+
+	mac = of_get_property(dn, "local-mac-address", NULL);
+	if (!mac)
+		return -EIO;
+	memcpy(addr.sa_data, mac, ETH_ALEN);
+
+	result = spider_net_set_mac(netdev, &addr);
+	if ((result) && (netif_msg_probe(card)))
+		dev_err(&card->netdev->dev,
+		        "Failed to set MAC address: %i\n", result);
+
+	result = register_netdev(netdev);
+	if (result) {
+		if (netif_msg_probe(card))
+			dev_err(&card->netdev->dev,
+			        "Couldn't register net_device: %i\n", result);
+		return result;
+	}
+
+	if (netif_msg_probe(card))
+		pr_info("Initialized device %s.\n", netdev->name);
+
+	return 0;
+}
+
+/**
+ * spider_net_alloc_card - allocates net_device and card structure
+ *
+ * returns the card structure or NULL in case of errors
+ *
+ * the card and net_device structures are linked to each other
+ */
+static struct spider_net_card *
+spider_net_alloc_card(void)
+{
+	struct net_device *netdev;
+	struct spider_net_card *card;
+	size_t alloc_size;
+
+	alloc_size = sizeof(struct spider_net_card) +
+	   (tx_descriptors + rx_descriptors) * sizeof(struct spider_net_descr);
+	netdev = alloc_etherdev(alloc_size);
+	if (!netdev)
+		return NULL;
+
+	card = netdev_priv(netdev);
+	card->netdev = netdev;
+	card->msg_enable = SPIDER_NET_DEFAULT_MSG;
+	INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task);
+	init_waitqueue_head(&card->waitq);
+	atomic_set(&card->tx_timeout_task_counter, 0);
+
+	card->rx_chain.num_desc = rx_descriptors;
+	card->rx_chain.ring = card->darray;
+	card->tx_chain.num_desc = tx_descriptors;
+	card->tx_chain.ring = card->darray + rx_descriptors;
+
+	return card;
+}
+
+/**
+ * spider_net_undo_pci_setup - releases PCI ressources
+ * @card: card structure
+ *
+ * spider_net_undo_pci_setup releases the mapped regions
+ */
+static void
+spider_net_undo_pci_setup(struct spider_net_card *card)
+{
+	iounmap(card->regs);
+	pci_release_regions(card->pdev);
+}
+
+/**
+ * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
+ * @pdev: PCI device
+ *
+ * Returns the card structure or NULL if any errors occur
+ *
+ * spider_net_setup_pci_dev initializes pdev and together with the
+ * functions called in spider_net_open configures the device so that
+ * data can be transferred over it
+ * The net_device structure is attached to the card structure, if the
+ * function returns without error.
+ **/
+static struct spider_net_card *
+spider_net_setup_pci_dev(struct pci_dev *pdev)
+{
+	struct spider_net_card *card;
+	unsigned long mmio_start, mmio_len;
+
+	if (pci_enable_device(pdev)) {
+		dev_err(&pdev->dev, "Couldn't enable PCI device\n");
+		return NULL;
+	}
+
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+		dev_err(&pdev->dev,
+		        "Couldn't find proper PCI device base address.\n");
+		goto out_disable_dev;
+	}
+
+	if (pci_request_regions(pdev, spider_net_driver_name)) {
+		dev_err(&pdev->dev,
+		        "Couldn't obtain PCI resources, aborting.\n");
+		goto out_disable_dev;
+	}
+
+	pci_set_master(pdev);
+
+	card = spider_net_alloc_card();
+	if (!card) {
+		dev_err(&pdev->dev,
+		        "Couldn't allocate net_device structure, aborting.\n");
+		goto out_release_regions;
+	}
+	card->pdev = pdev;
+
+	/* fetch base address and length of first resource */
+	mmio_start = pci_resource_start(pdev, 0);
+	mmio_len = pci_resource_len(pdev, 0);
+
+	card->netdev->mem_start = mmio_start;
+	card->netdev->mem_end = mmio_start + mmio_len;
+	card->regs = ioremap(mmio_start, mmio_len);
+
+	if (!card->regs) {
+		dev_err(&pdev->dev,
+		        "Couldn't obtain PCI resources, aborting.\n");
+		goto out_release_regions;
+	}
+
+	return card;
+
+out_release_regions:
+	pci_release_regions(pdev);
+out_disable_dev:
+	pci_disable_device(pdev);
+	return NULL;
+}
+
+/**
+ * spider_net_probe - initialization of a device
+ * @pdev: PCI device
+ * @ent: entry in the device id list
+ *
+ * Returns 0 on success, <0 on failure
+ *
+ * spider_net_probe initializes pdev and registers a net_device
+ * structure for it. After that, the device can be ifconfig'ed up
+ **/
+static int
+spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int err = -EIO;
+	struct spider_net_card *card;
+
+	card = spider_net_setup_pci_dev(pdev);
+	if (!card)
+		goto out;
+
+	spider_net_workaround_rxramfull(card);
+	spider_net_init_card(card);
+
+	err = spider_net_setup_phy(card);
+	if (err)
+		goto out_undo_pci;
+
+	err = spider_net_setup_netdev(card);
+	if (err)
+		goto out_undo_pci;
+
+	return 0;
+
+out_undo_pci:
+	spider_net_undo_pci_setup(card);
+	free_netdev(card->netdev);
+out:
+	return err;
+}
+
+/**
+ * spider_net_remove - removal of a device
+ * @pdev: PCI device
+ *
+ * Returns 0 on success, <0 on failure
+ *
+ * spider_net_remove is called to remove the device and unregisters the
+ * net_device
+ **/
+static void
+spider_net_remove(struct pci_dev *pdev)
+{
+	struct net_device *netdev;
+	struct spider_net_card *card;
+
+	netdev = pci_get_drvdata(pdev);
+	card = netdev_priv(netdev);
+
+	wait_event(card->waitq,
+		   atomic_read(&card->tx_timeout_task_counter) == 0);
+
+	unregister_netdev(netdev);
+
+	/* switch off card */
+	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
+			     SPIDER_NET_CKRCTRL_STOP_VALUE);
+	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
+			     SPIDER_NET_CKRCTRL_RUN_VALUE);
+
+	spider_net_undo_pci_setup(card);
+	free_netdev(netdev);
+}
+
+static struct pci_driver spider_net_driver = {
+	.name		= spider_net_driver_name,
+	.id_table	= spider_net_pci_tbl,
+	.probe		= spider_net_probe,
+	.remove		= spider_net_remove
+};
+
+/**
+ * spider_net_init - init function when the driver is loaded
+ *
+ * spider_net_init registers the device driver
+ */
+static int __init spider_net_init(void)
+{
+	printk(KERN_INFO "Spidernet version %s.\n", VERSION);
+
+	if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) {
+		rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN;
+		pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
+	}
+	if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) {
+		rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX;
+		pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
+	}
+	if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) {
+		tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN;
+		pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
+	}
+	if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) {
+		tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX;
+		pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
+	}
+
+	return pci_register_driver(&spider_net_driver);
+}
+
+/**
+ * spider_net_cleanup - exit function when driver is unloaded
+ *
+ * spider_net_cleanup unregisters the device driver
+ */
+static void __exit spider_net_cleanup(void)
+{
+	pci_unregister_driver(&spider_net_driver);
+}
+
+module_init(spider_net_init);
+module_exit(spider_net_cleanup);
diff --git a/drivers/net/ethernet/toshiba/spider_net.h b/drivers/net/ethernet/toshiba/spider_net.h
new file mode 100644
index 000000000..9b6af0845
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/spider_net.h
@@ -0,0 +1,489 @@
+/*
+ * Network device driver for Cell Processor-Based Blade and Celleb platform
+ *
+ * (C) Copyright IBM Corp. 2005
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * Authors : Utz Bacher <utz.bacher@de.ibm.com>
+ *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPIDER_NET_H
+#define _SPIDER_NET_H
+
+#define VERSION "2.0 B"
+
+#include <linux/sungem_phy.h>
+
+int spider_net_stop(struct net_device *netdev);
+int spider_net_open(struct net_device *netdev);
+
+extern const struct ethtool_ops spider_net_ethtool_ops;
+
+extern char spider_net_driver_name[];
+
+#define SPIDER_NET_MAX_FRAME			2312
+#define SPIDER_NET_MAX_MTU			2294
+#define SPIDER_NET_MIN_MTU			64
+
+#define SPIDER_NET_RXBUF_ALIGN			128
+
+#define SPIDER_NET_RX_DESCRIPTORS_DEFAULT	256
+#define SPIDER_NET_RX_DESCRIPTORS_MIN		16
+#define SPIDER_NET_RX_DESCRIPTORS_MAX		512
+
+#define SPIDER_NET_TX_DESCRIPTORS_DEFAULT	256
+#define SPIDER_NET_TX_DESCRIPTORS_MIN		16
+#define SPIDER_NET_TX_DESCRIPTORS_MAX		512
+
+#define SPIDER_NET_TX_TIMER			(HZ/5)
+#define SPIDER_NET_ANEG_TIMER			(HZ)
+#define SPIDER_NET_ANEG_TIMEOUT			5
+
+#define SPIDER_NET_RX_CSUM_DEFAULT		1
+
+#define SPIDER_NET_WATCHDOG_TIMEOUT		50*HZ
+#define SPIDER_NET_NAPI_WEIGHT			64
+
+#define SPIDER_NET_FIRMWARE_SEQS	6
+#define SPIDER_NET_FIRMWARE_SEQWORDS	1024
+#define SPIDER_NET_FIRMWARE_LEN		(SPIDER_NET_FIRMWARE_SEQS * \
+					 SPIDER_NET_FIRMWARE_SEQWORDS * \
+					 sizeof(u32))
+#define SPIDER_NET_FIRMWARE_NAME	"spider_fw.bin"
+
+/** spider_net SMMIO registers */
+#define SPIDER_NET_GHIINT0STS		0x00000000
+#define SPIDER_NET_GHIINT1STS		0x00000004
+#define SPIDER_NET_GHIINT2STS		0x00000008
+#define SPIDER_NET_GHIINT0MSK		0x00000010
+#define SPIDER_NET_GHIINT1MSK		0x00000014
+#define SPIDER_NET_GHIINT2MSK		0x00000018
+
+#define SPIDER_NET_GRESUMINTNUM		0x00000020
+#define SPIDER_NET_GREINTNUM		0x00000024
+
+#define SPIDER_NET_GFFRMNUM		0x00000028
+#define SPIDER_NET_GFAFRMNUM		0x0000002c
+#define SPIDER_NET_GFBFRMNUM		0x00000030
+#define SPIDER_NET_GFCFRMNUM		0x00000034
+#define SPIDER_NET_GFDFRMNUM		0x00000038
+
+/* clear them (don't use it) */
+#define SPIDER_NET_GFREECNNUM		0x0000003c
+#define SPIDER_NET_GONETIMENUM		0x00000040
+
+#define SPIDER_NET_GTOUTFRMNUM		0x00000044
+
+#define SPIDER_NET_GTXMDSET		0x00000050
+#define SPIDER_NET_GPCCTRL		0x00000054
+#define SPIDER_NET_GRXMDSET		0x00000058
+#define SPIDER_NET_GIPSECINIT		0x0000005c
+#define SPIDER_NET_GFTRESTRT		0x00000060
+#define SPIDER_NET_GRXDMAEN		0x00000064
+#define SPIDER_NET_GMRWOLCTRL		0x00000068
+#define SPIDER_NET_GPCWOPCMD		0x0000006c
+#define SPIDER_NET_GPCROPCMD		0x00000070
+#define SPIDER_NET_GTTFRMCNT		0x00000078
+#define SPIDER_NET_GTESTMD		0x0000007c
+
+#define SPIDER_NET_GSINIT		0x00000080
+#define SPIDER_NET_GSnPRGADR		0x00000084
+#define SPIDER_NET_GSnPRGDAT		0x00000088
+
+#define SPIDER_NET_GMACOPEMD		0x00000100
+#define SPIDER_NET_GMACLENLMT		0x00000108
+#define SPIDER_NET_GMACST		0x00000110
+#define SPIDER_NET_GMACINTEN		0x00000118
+#define SPIDER_NET_GMACPHYCTRL		0x00000120
+
+#define SPIDER_NET_GMACAPAUSE		0x00000154
+#define SPIDER_NET_GMACTXPAUSE		0x00000164
+
+#define SPIDER_NET_GMACMODE		0x000001b0
+#define SPIDER_NET_GMACBSTLMT		0x000001b4
+
+#define SPIDER_NET_GMACUNIMACU		0x000001c0
+#define SPIDER_NET_GMACUNIMACL		0x000001c8
+
+#define SPIDER_NET_GMRMHFILnR		0x00000400
+#define SPIDER_NET_MULTICAST_HASHES	256
+
+#define SPIDER_NET_GMRUAFILnR		0x00000500
+#define SPIDER_NET_GMRUA0FIL15R		0x00000578
+
+#define SPIDER_NET_GTTQMSK		0x00000934
+
+/* RX DMA controller registers, all 0x00000a.. are for DMA controller A,
+ * 0x00000b.. for DMA controller B, etc. */
+#define SPIDER_NET_GDADCHA		0x00000a00
+#define SPIDER_NET_GDADMACCNTR		0x00000a04
+#define SPIDER_NET_GDACTDPA		0x00000a08
+#define SPIDER_NET_GDACTDCNT		0x00000a0c
+#define SPIDER_NET_GDACDBADDR		0x00000a20
+#define SPIDER_NET_GDACDBSIZE		0x00000a24
+#define SPIDER_NET_GDACNEXTDA		0x00000a28
+#define SPIDER_NET_GDACCOMST		0x00000a2c
+#define SPIDER_NET_GDAWBCOMST		0x00000a30
+#define SPIDER_NET_GDAWBRSIZE		0x00000a34
+#define SPIDER_NET_GDAWBVSIZE		0x00000a38
+#define SPIDER_NET_GDAWBTRST		0x00000a3c
+#define SPIDER_NET_GDAWBTRERR		0x00000a40
+
+/* TX DMA controller registers */
+#define SPIDER_NET_GDTDCHA		0x00000e00
+#define SPIDER_NET_GDTDMACCNTR		0x00000e04
+#define SPIDER_NET_GDTCDPA		0x00000e08
+#define SPIDER_NET_GDTDMASEL		0x00000e14
+
+#define SPIDER_NET_ECMODE		0x00000f00
+/* clock and reset control register */
+#define SPIDER_NET_CKRCTRL		0x00000ff0
+
+/** SCONFIG registers */
+#define SPIDER_NET_SCONFIG_IOACTE	0x00002810
+
+/** interrupt mask registers */
+#define SPIDER_NET_INT0_MASK_VALUE	0x3f7fe2c7
+#define SPIDER_NET_INT1_MASK_VALUE	0x0000fff2
+#define SPIDER_NET_INT2_MASK_VALUE	0x000003f1
+
+/* we rely on flagged descriptor interrupts */
+#define SPIDER_NET_FRAMENUM_VALUE	0x00000000
+/* set this first, then the FRAMENUM_VALUE */
+#define SPIDER_NET_GFXFRAMES_VALUE	0x00000000
+
+#define SPIDER_NET_STOP_SEQ_VALUE	0x00000000
+#define SPIDER_NET_RUN_SEQ_VALUE	0x0000007e
+
+#define SPIDER_NET_PHY_CTRL_VALUE	0x00040040
+/* #define SPIDER_NET_PHY_CTRL_VALUE	0x01070080*/
+#define SPIDER_NET_RXMODE_VALUE		0x00000011
+/* auto retransmission in case of MAC aborts */
+#define SPIDER_NET_TXMODE_VALUE		0x00010000
+#define SPIDER_NET_RESTART_VALUE	0x00000000
+#define SPIDER_NET_WOL_VALUE		0x00001111
+#if 0
+#define SPIDER_NET_WOL_VALUE		0x00000000
+#endif
+#define SPIDER_NET_IPSECINIT_VALUE	0x6f716f71
+
+/* pause frames: automatic, no upper retransmission count */
+/* outside loopback mode: ETOMOD signal dont matter, not connected */
+/* ETOMOD signal is brought to PHY reset. bit 2 must be 1 in Celleb */
+#define SPIDER_NET_OPMODE_VALUE		0x00000067
+/*#define SPIDER_NET_OPMODE_VALUE		0x001b0062*/
+#define SPIDER_NET_LENLMT_VALUE		0x00000908
+
+#define SPIDER_NET_MACAPAUSE_VALUE	0x00000800 /* about 1 ms */
+#define SPIDER_NET_TXPAUSE_VALUE	0x00000000
+
+#define SPIDER_NET_MACMODE_VALUE	0x00000001
+#define SPIDER_NET_BURSTLMT_VALUE	0x00000200 /* about 16 us */
+
+/* DMAC control register GDMACCNTR
+ *
+ * 1(0)				enable r/tx dma
+ *  0000000				fixed to 0
+ *
+ *         000000			fixed to 0
+ *               0(1)			en/disable descr writeback on force end
+ *                0(1)			force end
+ *
+ *                 000000		fixed to 0
+ *                       00		burst alignment: 128 bytes
+ *                       11		burst alignment: 1024 bytes
+ *
+ *                         00000	fixed to 0
+ *                              0	descr writeback size 32 bytes
+ *                               0(1)	descr chain end interrupt enable
+ *                                0(1)	descr status writeback enable */
+
+/* to set RX_DMA_EN */
+#define SPIDER_NET_DMA_RX_VALUE		0x80000000
+#define SPIDER_NET_DMA_RX_FEND_VALUE	0x00030003
+/* to set TX_DMA_EN */
+#define SPIDER_NET_TX_DMA_EN           0x80000000
+#define SPIDER_NET_GDTBSTA             0x00000300
+#define SPIDER_NET_GDTDCEIDIS          0x00000002
+#define SPIDER_NET_DMA_TX_VALUE        SPIDER_NET_TX_DMA_EN | \
+                                       SPIDER_NET_GDTDCEIDIS | \
+                                       SPIDER_NET_GDTBSTA
+
+#define SPIDER_NET_DMA_TX_FEND_VALUE	0x00030003
+
+/* SPIDER_NET_UA_DESCR_VALUE is OR'ed with the unicast address */
+#define SPIDER_NET_UA_DESCR_VALUE	0x00080000
+#define SPIDER_NET_PROMISC_VALUE	0x00080000
+#define SPIDER_NET_NONPROMISC_VALUE	0x00000000
+
+#define SPIDER_NET_DMASEL_VALUE		0x00000001
+
+#define SPIDER_NET_ECMODE_VALUE		0x00000000
+
+#define SPIDER_NET_CKRCTRL_RUN_VALUE	0x1fff010f
+#define SPIDER_NET_CKRCTRL_STOP_VALUE	0x0000010f
+
+#define SPIDER_NET_SBIMSTATE_VALUE	0x00000000
+#define SPIDER_NET_SBTMSTATE_VALUE	0x00000000
+
+/* SPIDER_NET_GHIINT0STS bits, in reverse order so that they can be used
+ * with 1 << SPIDER_NET_... */
+enum spider_net_int0_status {
+	SPIDER_NET_GPHYINT = 0,
+	SPIDER_NET_GMAC2INT,
+	SPIDER_NET_GMAC1INT,
+	SPIDER_NET_GIPSINT,
+	SPIDER_NET_GFIFOINT,
+	SPIDER_NET_GDMACINT,
+	SPIDER_NET_GSYSINT,
+	SPIDER_NET_GPWOPCMPINT,
+	SPIDER_NET_GPROPCMPINT,
+	SPIDER_NET_GPWFFINT,
+	SPIDER_NET_GRMDADRINT,
+	SPIDER_NET_GRMARPINT,
+	SPIDER_NET_GRMMPINT,
+	SPIDER_NET_GDTDEN0INT,
+	SPIDER_NET_GDDDEN0INT,
+	SPIDER_NET_GDCDEN0INT,
+	SPIDER_NET_GDBDEN0INT,
+	SPIDER_NET_GDADEN0INT,
+	SPIDER_NET_GDTFDCINT,
+	SPIDER_NET_GDDFDCINT,
+	SPIDER_NET_GDCFDCINT,
+	SPIDER_NET_GDBFDCINT,
+	SPIDER_NET_GDAFDCINT,
+	SPIDER_NET_GTTEDINT,
+	SPIDER_NET_GDTDCEINT,
+	SPIDER_NET_GRFDNMINT,
+	SPIDER_NET_GRFCNMINT,
+	SPIDER_NET_GRFBNMINT,
+	SPIDER_NET_GRFANMINT,
+	SPIDER_NET_GRFNMINT,
+	SPIDER_NET_G1TMCNTINT,
+	SPIDER_NET_GFREECNTINT
+};
+/* GHIINT1STS bits */
+enum spider_net_int1_status {
+	SPIDER_NET_GTMFLLINT = 0,
+	SPIDER_NET_GRMFLLINT,
+	SPIDER_NET_GTMSHTINT,
+	SPIDER_NET_GDTINVDINT,
+	SPIDER_NET_GRFDFLLINT,
+	SPIDER_NET_GDDDCEINT,
+	SPIDER_NET_GDDINVDINT,
+	SPIDER_NET_GRFCFLLINT,
+	SPIDER_NET_GDCDCEINT,
+	SPIDER_NET_GDCINVDINT,
+	SPIDER_NET_GRFBFLLINT,
+	SPIDER_NET_GDBDCEINT,
+	SPIDER_NET_GDBINVDINT,
+	SPIDER_NET_GRFAFLLINT,
+	SPIDER_NET_GDADCEINT,
+	SPIDER_NET_GDAINVDINT,
+	SPIDER_NET_GDTRSERINT,
+	SPIDER_NET_GDDRSERINT,
+	SPIDER_NET_GDCRSERINT,
+	SPIDER_NET_GDBRSERINT,
+	SPIDER_NET_GDARSERINT,
+	SPIDER_NET_GDSERINT,
+	SPIDER_NET_GDTPTERINT,
+	SPIDER_NET_GDDPTERINT,
+	SPIDER_NET_GDCPTERINT,
+	SPIDER_NET_GDBPTERINT,
+	SPIDER_NET_GDAPTERINT
+};
+/* GHIINT2STS bits */
+enum spider_net_int2_status {
+	SPIDER_NET_GPROPERINT = 0,
+	SPIDER_NET_GMCTCRSNGINT,
+	SPIDER_NET_GMCTLCOLINT,
+	SPIDER_NET_GMCTTMOTINT,
+	SPIDER_NET_GMCRCAERINT,
+	SPIDER_NET_GMCRCALERINT,
+	SPIDER_NET_GMCRALNERINT,
+	SPIDER_NET_GMCROVRINT,
+	SPIDER_NET_GMCRRNTINT,
+	SPIDER_NET_GMCRRXERINT,
+	SPIDER_NET_GTITCSERINT,
+	SPIDER_NET_GTIFMTERINT,
+	SPIDER_NET_GTIPKTRVKINT,
+	SPIDER_NET_GTISPINGINT,
+	SPIDER_NET_GTISADNGINT,
+	SPIDER_NET_GTISPDNGINT,
+	SPIDER_NET_GRIFMTERINT,
+	SPIDER_NET_GRIPKTRVKINT,
+	SPIDER_NET_GRISPINGINT,
+	SPIDER_NET_GRISADNGINT,
+	SPIDER_NET_GRISPDNGINT
+};
+
+#define SPIDER_NET_TXINT	(1 << SPIDER_NET_GDTFDCINT)
+
+/* We rely on flagged descriptor interrupts */
+#define SPIDER_NET_RXINT	( (1 << SPIDER_NET_GDAFDCINT) )
+
+#define SPIDER_NET_LINKINT	( 1 << SPIDER_NET_GMAC2INT )
+
+#define SPIDER_NET_ERRINT	( 0xffffffff & \
+				  (~SPIDER_NET_TXINT) & \
+				  (~SPIDER_NET_RXINT) & \
+				  (~SPIDER_NET_LINKINT) )
+
+#define SPIDER_NET_GPREXEC			0x80000000
+#define SPIDER_NET_GPRDAT_MASK			0x0000ffff
+
+#define SPIDER_NET_DMAC_NOINTR_COMPLETE		0x00800000
+#define SPIDER_NET_DMAC_TXFRMTL		0x00040000
+#define SPIDER_NET_DMAC_TCP			0x00020000
+#define SPIDER_NET_DMAC_UDP			0x00030000
+#define SPIDER_NET_TXDCEST			0x08000000
+
+#define SPIDER_NET_DESCR_RXFDIS        0x00000001
+#define SPIDER_NET_DESCR_RXDCEIS       0x00000002
+#define SPIDER_NET_DESCR_RXDEN0IS      0x00000004
+#define SPIDER_NET_DESCR_RXINVDIS      0x00000008
+#define SPIDER_NET_DESCR_RXRERRIS      0x00000010
+#define SPIDER_NET_DESCR_RXFDCIMS      0x00000100
+#define SPIDER_NET_DESCR_RXDCEIMS      0x00000200
+#define SPIDER_NET_DESCR_RXDEN0IMS     0x00000400
+#define SPIDER_NET_DESCR_RXINVDIMS     0x00000800
+#define SPIDER_NET_DESCR_RXRERRMIS     0x00001000
+#define SPIDER_NET_DESCR_UNUSED        0x077fe0e0
+
+#define SPIDER_NET_DESCR_IND_PROC_MASK		0xF0000000
+#define SPIDER_NET_DESCR_COMPLETE		0x00000000 /* used in rx and tx */
+#define SPIDER_NET_DESCR_RESPONSE_ERROR		0x10000000 /* used in rx and tx */
+#define SPIDER_NET_DESCR_PROTECTION_ERROR	0x20000000 /* used in rx and tx */
+#define SPIDER_NET_DESCR_FRAME_END		0x40000000 /* used in rx */
+#define SPIDER_NET_DESCR_FORCE_END		0x50000000 /* used in rx and tx */
+#define SPIDER_NET_DESCR_CARDOWNED		0xA0000000 /* used in rx and tx */
+#define SPIDER_NET_DESCR_NOT_IN_USE		0xF0000000
+#define SPIDER_NET_DESCR_TXDESFLG		0x00800000
+
+#define SPIDER_NET_DESCR_BAD_STATUS   (SPIDER_NET_DESCR_RXDEN0IS | \
+                                       SPIDER_NET_DESCR_RXRERRIS | \
+                                       SPIDER_NET_DESCR_RXDEN0IMS | \
+                                       SPIDER_NET_DESCR_RXINVDIMS | \
+                                       SPIDER_NET_DESCR_RXRERRMIS | \
+                                       SPIDER_NET_DESCR_UNUSED)
+
+/* Descriptor, as defined by the hardware */
+struct spider_net_hw_descr {
+	u32 buf_addr;
+	u32 buf_size;
+	u32 next_descr_addr;
+	u32 dmac_cmd_status;
+	u32 result_size;
+	u32 valid_size;	/* all zeroes for tx */
+	u32 data_status;
+	u32 data_error;	/* all zeroes for tx */
+} __attribute__((aligned(32)));
+
+struct spider_net_descr {
+	struct spider_net_hw_descr *hwdescr;
+	struct sk_buff *skb;
+	u32 bus_addr;
+	struct spider_net_descr *next;
+	struct spider_net_descr *prev;
+};
+
+struct spider_net_descr_chain {
+	spinlock_t lock;
+	struct spider_net_descr *head;
+	struct spider_net_descr *tail;
+	struct spider_net_descr *ring;
+	int num_desc;
+	struct spider_net_hw_descr *hwring;
+	dma_addr_t dma_addr;
+};
+
+/* descriptor data_status bits */
+#define SPIDER_NET_RX_IPCHK		29
+#define SPIDER_NET_RX_TCPCHK		28
+#define SPIDER_NET_VLAN_PACKET		21
+#define SPIDER_NET_DATA_STATUS_CKSUM_MASK ( (1 << SPIDER_NET_RX_IPCHK) | \
+					  (1 << SPIDER_NET_RX_TCPCHK) )
+
+/* descriptor data_error bits */
+#define SPIDER_NET_RX_IPCHKERR		27
+#define SPIDER_NET_RX_RXTCPCHKERR	28
+
+#define SPIDER_NET_DATA_ERR_CKSUM_MASK	(1 << SPIDER_NET_RX_IPCHKERR)
+
+/* the cases we don't pass the packet to the stack.
+ * 701b8000 would be correct, but every packets gets that flag */
+#define SPIDER_NET_DESTROY_RX_FLAGS	0x700b8000
+
+#define SPIDER_NET_DEFAULT_MSG		( NETIF_MSG_DRV | \
+					  NETIF_MSG_PROBE | \
+					  NETIF_MSG_LINK | \
+					  NETIF_MSG_TIMER | \
+					  NETIF_MSG_IFDOWN | \
+					  NETIF_MSG_IFUP | \
+					  NETIF_MSG_RX_ERR | \
+					  NETIF_MSG_TX_ERR | \
+					  NETIF_MSG_TX_QUEUED | \
+					  NETIF_MSG_INTR | \
+					  NETIF_MSG_TX_DONE | \
+					  NETIF_MSG_RX_STATUS | \
+					  NETIF_MSG_PKTDATA | \
+					  NETIF_MSG_HW | \
+					  NETIF_MSG_WOL )
+
+struct spider_net_extra_stats {
+	unsigned long rx_desc_error;
+	unsigned long tx_timeouts;
+	unsigned long alloc_rx_skb_error;
+	unsigned long rx_iommu_map_error;
+	unsigned long tx_iommu_map_error;
+	unsigned long rx_desc_unk_state;
+};
+
+struct spider_net_card {
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+	struct mii_phy phy;
+
+	struct napi_struct napi;
+
+	int medium;
+
+	void __iomem *regs;
+
+	struct spider_net_descr_chain tx_chain;
+	struct spider_net_descr_chain rx_chain;
+	struct spider_net_descr *low_watermark;
+
+	int aneg_count;
+	struct timer_list aneg_timer;
+	struct timer_list tx_timer;
+	struct work_struct tx_timeout_task;
+	atomic_t tx_timeout_task_counter;
+	wait_queue_head_t waitq;
+	int num_rx_ints;
+	int ignore_rx_ramfull;
+
+	/* for ethtool */
+	int msg_enable;
+	struct spider_net_extra_stats spider_stats;
+
+	/* Must be last item in struct */
+	struct spider_net_descr darray[0];
+};
+
+#endif
diff --git a/drivers/net/ethernet/toshiba/spider_net_ethtool.c b/drivers/net/ethernet/toshiba/spider_net_ethtool.c
new file mode 100644
index 000000000..16bd036d0
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/spider_net_ethtool.c
@@ -0,0 +1,185 @@
+/*
+ * Network device driver for Cell Processor-Based Blade
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Authors : Utz Bacher <utz.bacher@de.ibm.com>
+ *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+
+#include "spider_net.h"
+
+
+static struct {
+	const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+	{ "tx_packets" },
+	{ "tx_bytes" },
+	{ "rx_packets" },
+	{ "rx_bytes" },
+	{ "tx_errors" },
+	{ "tx_dropped" },
+	{ "rx_dropped" },
+	{ "rx_descriptor_error" },
+	{ "tx_timeouts" },
+	{ "alloc_rx_skb_error" },
+	{ "rx_iommu_map_error" },
+	{ "tx_iommu_map_error" },
+	{ "rx_desc_unk_state" },
+};
+
+static int
+spider_net_ethtool_get_link_ksettings(struct net_device *netdev,
+				      struct ethtool_link_ksettings *cmd)
+{
+	struct spider_net_card *card;
+	card = netdev_priv(netdev);
+
+	ethtool_link_ksettings_zero_link_mode(cmd, supported);
+	ethtool_link_ksettings_add_link_mode(cmd, supported, 1000baseT_Full);
+	ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
+
+	ethtool_link_ksettings_zero_link_mode(cmd, advertising);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, 1000baseT_Full);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
+
+	cmd->base.port = PORT_FIBRE;
+	cmd->base.speed = card->phy.speed;
+	cmd->base.duplex = DUPLEX_FULL;
+
+	return 0;
+}
+
+static void
+spider_net_ethtool_get_drvinfo(struct net_device *netdev,
+			       struct ethtool_drvinfo *drvinfo)
+{
+	struct spider_net_card *card;
+	card = netdev_priv(netdev);
+
+	/* clear and fill out info */
+	strlcpy(drvinfo->driver, spider_net_driver_name,
+		sizeof(drvinfo->driver));
+	strlcpy(drvinfo->version, VERSION, sizeof(drvinfo->version));
+	strlcpy(drvinfo->fw_version, "no information",
+		sizeof(drvinfo->fw_version));
+	strlcpy(drvinfo->bus_info, pci_name(card->pdev),
+		sizeof(drvinfo->bus_info));
+}
+
+static void
+spider_net_ethtool_get_wol(struct net_device *netdev,
+			   struct ethtool_wolinfo *wolinfo)
+{
+	/* no support for wol */
+	wolinfo->supported = 0;
+	wolinfo->wolopts = 0;
+}
+
+static u32
+spider_net_ethtool_get_msglevel(struct net_device *netdev)
+{
+	struct spider_net_card *card;
+	card = netdev_priv(netdev);
+	return card->msg_enable;
+}
+
+static void
+spider_net_ethtool_set_msglevel(struct net_device *netdev,
+				u32 level)
+{
+	struct spider_net_card *card;
+	card = netdev_priv(netdev);
+	card->msg_enable = level;
+}
+
+static int
+spider_net_ethtool_nway_reset(struct net_device *netdev)
+{
+	if (netif_running(netdev)) {
+		spider_net_stop(netdev);
+		spider_net_open(netdev);
+	}
+	return 0;
+}
+
+static void
+spider_net_ethtool_get_ringparam(struct net_device *netdev,
+				 struct ethtool_ringparam *ering)
+{
+	struct spider_net_card *card = netdev_priv(netdev);
+
+	ering->tx_max_pending = SPIDER_NET_TX_DESCRIPTORS_MAX;
+	ering->tx_pending = card->tx_chain.num_desc;
+	ering->rx_max_pending = SPIDER_NET_RX_DESCRIPTORS_MAX;
+	ering->rx_pending = card->rx_chain.num_desc;
+}
+
+static int spider_net_get_sset_count(struct net_device *netdev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return ARRAY_SIZE(ethtool_stats_keys);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void spider_net_get_ethtool_stats(struct net_device *netdev,
+		struct ethtool_stats *stats, u64 *data)
+{
+	struct spider_net_card *card = netdev_priv(netdev);
+
+	data[0] = netdev->stats.tx_packets;
+	data[1] = netdev->stats.tx_bytes;
+	data[2] = netdev->stats.rx_packets;
+	data[3] = netdev->stats.rx_bytes;
+	data[4] = netdev->stats.tx_errors;
+	data[5] = netdev->stats.tx_dropped;
+	data[6] = netdev->stats.rx_dropped;
+	data[7] = card->spider_stats.rx_desc_error;
+	data[8] = card->spider_stats.tx_timeouts;
+	data[9] = card->spider_stats.alloc_rx_skb_error;
+	data[10] = card->spider_stats.rx_iommu_map_error;
+	data[11] = card->spider_stats.tx_iommu_map_error;
+	data[12] = card->spider_stats.rx_desc_unk_state;
+}
+
+static void spider_net_get_strings(struct net_device *netdev, u32 stringset,
+				   u8 *data)
+{
+	memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+const struct ethtool_ops spider_net_ethtool_ops = {
+	.get_drvinfo		= spider_net_ethtool_get_drvinfo,
+	.get_wol		= spider_net_ethtool_get_wol,
+	.get_msglevel		= spider_net_ethtool_get_msglevel,
+	.set_msglevel		= spider_net_ethtool_set_msglevel,
+	.get_link		= ethtool_op_get_link,
+	.nway_reset		= spider_net_ethtool_nway_reset,
+	.get_ringparam          = spider_net_ethtool_get_ringparam,
+	.get_strings		= spider_net_get_strings,
+	.get_sset_count		= spider_net_get_sset_count,
+	.get_ethtool_stats	= spider_net_get_ethtool_stats,
+	.get_link_ksettings	= spider_net_ethtool_get_link_ksettings,
+};
+
diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c
new file mode 100644
index 000000000..03afc4d8c
--- /dev/null
+++ b/drivers/net/ethernet/toshiba/tc35815.c
@@ -0,0 +1,2158 @@
+/*
+ * tc35815.c: A TOSHIBA TC35815CF PCI 10/100Mbps ethernet driver for linux.
+ *
+ * Based on skelton.c by Donald Becker.
+ *
+ * This driver is a replacement of older and less maintained version.
+ * This is a header of the older version:
+ *	-----<snip>-----
+ *	Copyright 2001 MontaVista Software Inc.
+ *	Author: MontaVista Software, Inc.
+ *		ahennessy@mvista.com
+ *	Copyright (C) 2000-2001 Toshiba Corporation
+ *	static const char *version =
+ *		"tc35815.c:v0.00 26/07/2000 by Toshiba Corporation\n";
+ *	-----<snip>-----
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) Copyright TOSHIBA CORPORATION 2004-2005
+ * All Rights Reserved.
+ */
+
+#define DRV_VERSION	"1.39"
+static const char version[] = "tc35815.c:v" DRV_VERSION "\n";
+#define MODNAME			"tc35815"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/if_vlan.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/prefetch.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+enum tc35815_chiptype {
+	TC35815CF = 0,
+	TC35815_NWU,
+	TC35815_TX4939,
+};
+
+/* indexed by tc35815_chiptype, above */
+static const struct {
+	const char *name;
+} chip_info[] = {
+	{ "TOSHIBA TC35815CF 10/100BaseTX" },
+	{ "TOSHIBA TC35815 with Wake on LAN" },
+	{ "TOSHIBA TC35815/TX4939" },
+};
+
+static const struct pci_device_id tc35815_pci_tbl[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815CF), .driver_data = TC35815CF },
+	{PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815_NWU), .driver_data = TC35815_NWU },
+	{PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939), .driver_data = TC35815_TX4939 },
+	{0,}
+};
+MODULE_DEVICE_TABLE(pci, tc35815_pci_tbl);
+
+/* see MODULE_PARM_DESC */
+static struct tc35815_options {
+	int speed;
+	int duplex;
+} options;
+
+/*
+ * Registers
+ */
+struct tc35815_regs {
+	__u32 DMA_Ctl;		/* 0x00 */
+	__u32 TxFrmPtr;
+	__u32 TxThrsh;
+	__u32 TxPollCtr;
+	__u32 BLFrmPtr;
+	__u32 RxFragSize;
+	__u32 Int_En;
+	__u32 FDA_Bas;
+	__u32 FDA_Lim;		/* 0x20 */
+	__u32 Int_Src;
+	__u32 unused0[2];
+	__u32 PauseCnt;
+	__u32 RemPauCnt;
+	__u32 TxCtlFrmStat;
+	__u32 unused1;
+	__u32 MAC_Ctl;		/* 0x40 */
+	__u32 CAM_Ctl;
+	__u32 Tx_Ctl;
+	__u32 Tx_Stat;
+	__u32 Rx_Ctl;
+	__u32 Rx_Stat;
+	__u32 MD_Data;
+	__u32 MD_CA;
+	__u32 CAM_Adr;		/* 0x60 */
+	__u32 CAM_Data;
+	__u32 CAM_Ena;
+	__u32 PROM_Ctl;
+	__u32 PROM_Data;
+	__u32 Algn_Cnt;
+	__u32 CRC_Cnt;
+	__u32 Miss_Cnt;
+};
+
+/*
+ * Bit assignments
+ */
+/* DMA_Ctl bit assign ------------------------------------------------------- */
+#define DMA_RxAlign	       0x00c00000 /* 1:Reception Alignment	     */
+#define DMA_RxAlign_1	       0x00400000
+#define DMA_RxAlign_2	       0x00800000
+#define DMA_RxAlign_3	       0x00c00000
+#define DMA_M66EnStat	       0x00080000 /* 1:66MHz Enable State	     */
+#define DMA_IntMask	       0x00040000 /* 1:Interrupt mask		     */
+#define DMA_SWIntReq	       0x00020000 /* 1:Software Interrupt request    */
+#define DMA_TxWakeUp	       0x00010000 /* 1:Transmit Wake Up		     */
+#define DMA_RxBigE	       0x00008000 /* 1:Receive Big Endian	     */
+#define DMA_TxBigE	       0x00004000 /* 1:Transmit Big Endian	     */
+#define DMA_TestMode	       0x00002000 /* 1:Test Mode		     */
+#define DMA_PowrMgmnt	       0x00001000 /* 1:Power Management		     */
+#define DMA_DmBurst_Mask       0x000001fc /* DMA Burst size		     */
+
+/* RxFragSize bit assign ---------------------------------------------------- */
+#define RxFrag_EnPack	       0x00008000 /* 1:Enable Packing		     */
+#define RxFrag_MinFragMask     0x00000ffc /* Minimum Fragment		     */
+
+/* MAC_Ctl bit assign ------------------------------------------------------- */
+#define MAC_Link10	       0x00008000 /* 1:Link Status 10Mbits	     */
+#define MAC_EnMissRoll	       0x00002000 /* 1:Enable Missed Roll	     */
+#define MAC_MissRoll	       0x00000400 /* 1:Missed Roll		     */
+#define MAC_Loop10	       0x00000080 /* 1:Loop 10 Mbps		     */
+#define MAC_Conn_Auto	       0x00000000 /*00:Connection mode (Automatic)   */
+#define MAC_Conn_10M	       0x00000020 /*01:		       (10Mbps endec)*/
+#define MAC_Conn_Mll	       0x00000040 /*10:		       (Mll clock)   */
+#define MAC_MacLoop	       0x00000010 /* 1:MAC Loopback		     */
+#define MAC_FullDup	       0x00000008 /* 1:Full Duplex 0:Half Duplex     */
+#define MAC_Reset	       0x00000004 /* 1:Software Reset		     */
+#define MAC_HaltImm	       0x00000002 /* 1:Halt Immediate		     */
+#define MAC_HaltReq	       0x00000001 /* 1:Halt request		     */
+
+/* PROM_Ctl bit assign ------------------------------------------------------ */
+#define PROM_Busy	       0x00008000 /* 1:Busy (Start Operation)	     */
+#define PROM_Read	       0x00004000 /*10:Read operation		     */
+#define PROM_Write	       0x00002000 /*01:Write operation		     */
+#define PROM_Erase	       0x00006000 /*11:Erase operation		     */
+					  /*00:Enable or Disable Writting,   */
+					  /*	  as specified in PROM_Addr. */
+#define PROM_Addr_Ena	       0x00000030 /*11xxxx:PROM Write enable	     */
+					  /*00xxxx:	      disable	     */
+
+/* CAM_Ctl bit assign ------------------------------------------------------- */
+#define CAM_CompEn	       0x00000010 /* 1:CAM Compare Enable	     */
+#define CAM_NegCAM	       0x00000008 /* 1:Reject packets CAM recognizes,*/
+					  /*			accept other */
+#define CAM_BroadAcc	       0x00000004 /* 1:Broadcast assept		     */
+#define CAM_GroupAcc	       0x00000002 /* 1:Multicast assept		     */
+#define CAM_StationAcc	       0x00000001 /* 1:unicast accept		     */
+
+/* CAM_Ena bit assign ------------------------------------------------------- */
+#define CAM_ENTRY_MAX		       21   /* CAM Data entry max count	     */
+#define CAM_Ena_Mask ((1<<CAM_ENTRY_MAX)-1) /* CAM Enable bits (Max 21bits)  */
+#define CAM_Ena_Bit(index)	(1 << (index))
+#define CAM_ENTRY_DESTINATION	0
+#define CAM_ENTRY_SOURCE	1
+#define CAM_ENTRY_MACCTL	20
+
+/* Tx_Ctl bit assign -------------------------------------------------------- */
+#define Tx_En		       0x00000001 /* 1:Transmit enable		     */
+#define Tx_TxHalt	       0x00000002 /* 1:Transmit Halt Request	     */
+#define Tx_NoPad	       0x00000004 /* 1:Suppress Padding		     */
+#define Tx_NoCRC	       0x00000008 /* 1:Suppress Padding		     */
+#define Tx_FBack	       0x00000010 /* 1:Fast Back-off		     */
+#define Tx_EnUnder	       0x00000100 /* 1:Enable Underrun		     */
+#define Tx_EnExDefer	       0x00000200 /* 1:Enable Excessive Deferral     */
+#define Tx_EnLCarr	       0x00000400 /* 1:Enable Lost Carrier	     */
+#define Tx_EnExColl	       0x00000800 /* 1:Enable Excessive Collision    */
+#define Tx_EnLateColl	       0x00001000 /* 1:Enable Late Collision	     */
+#define Tx_EnTxPar	       0x00002000 /* 1:Enable Transmit Parity	     */
+#define Tx_EnComp	       0x00004000 /* 1:Enable Completion	     */
+
+/* Tx_Stat bit assign ------------------------------------------------------- */
+#define Tx_TxColl_MASK	       0x0000000F /* Tx Collision Count		     */
+#define Tx_ExColl	       0x00000010 /* Excessive Collision	     */
+#define Tx_TXDefer	       0x00000020 /* Transmit Defered		     */
+#define Tx_Paused	       0x00000040 /* Transmit Paused		     */
+#define Tx_IntTx	       0x00000080 /* Interrupt on Tx		     */
+#define Tx_Under	       0x00000100 /* Underrun			     */
+#define Tx_Defer	       0x00000200 /* Deferral			     */
+#define Tx_NCarr	       0x00000400 /* No Carrier			     */
+#define Tx_10Stat	       0x00000800 /* 10Mbps Status		     */
+#define Tx_LateColl	       0x00001000 /* Late Collision		     */
+#define Tx_TxPar	       0x00002000 /* Tx Parity Error		     */
+#define Tx_Comp		       0x00004000 /* Completion			     */
+#define Tx_Halted	       0x00008000 /* Tx Halted			     */
+#define Tx_SQErr	       0x00010000 /* Signal Quality Error(SQE)	     */
+
+/* Rx_Ctl bit assign -------------------------------------------------------- */
+#define Rx_EnGood	       0x00004000 /* 1:Enable Good		     */
+#define Rx_EnRxPar	       0x00002000 /* 1:Enable Receive Parity	     */
+#define Rx_EnLongErr	       0x00000800 /* 1:Enable Long Error	     */
+#define Rx_EnOver	       0x00000400 /* 1:Enable OverFlow		     */
+#define Rx_EnCRCErr	       0x00000200 /* 1:Enable CRC Error		     */
+#define Rx_EnAlign	       0x00000100 /* 1:Enable Alignment		     */
+#define Rx_IgnoreCRC	       0x00000040 /* 1:Ignore CRC Value		     */
+#define Rx_StripCRC	       0x00000010 /* 1:Strip CRC Value		     */
+#define Rx_ShortEn	       0x00000008 /* 1:Short Enable		     */
+#define Rx_LongEn	       0x00000004 /* 1:Long Enable		     */
+#define Rx_RxHalt	       0x00000002 /* 1:Receive Halt Request	     */
+#define Rx_RxEn		       0x00000001 /* 1:Receive Intrrupt Enable	     */
+
+/* Rx_Stat bit assign ------------------------------------------------------- */
+#define Rx_Halted	       0x00008000 /* Rx Halted			     */
+#define Rx_Good		       0x00004000 /* Rx Good			     */
+#define Rx_RxPar	       0x00002000 /* Rx Parity Error		     */
+#define Rx_TypePkt	       0x00001000 /* Rx Type Packet		     */
+#define Rx_LongErr	       0x00000800 /* Rx Long Error		     */
+#define Rx_Over		       0x00000400 /* Rx Overflow		     */
+#define Rx_CRCErr	       0x00000200 /* Rx CRC Error		     */
+#define Rx_Align	       0x00000100 /* Rx Alignment Error		     */
+#define Rx_10Stat	       0x00000080 /* Rx 10Mbps Status		     */
+#define Rx_IntRx	       0x00000040 /* Rx Interrupt		     */
+#define Rx_CtlRecd	       0x00000020 /* Rx Control Receive		     */
+#define Rx_InLenErr	       0x00000010 /* Rx In Range Frame Length Error  */
+
+#define Rx_Stat_Mask	       0x0000FFF0 /* Rx All Status Mask		     */
+
+/* Int_En bit assign -------------------------------------------------------- */
+#define Int_NRAbtEn	       0x00000800 /* 1:Non-recoverable Abort Enable  */
+#define Int_TxCtlCmpEn	       0x00000400 /* 1:Transmit Ctl Complete Enable  */
+#define Int_DmParErrEn	       0x00000200 /* 1:DMA Parity Error Enable	     */
+#define Int_DParDEn	       0x00000100 /* 1:Data Parity Error Enable	     */
+#define Int_EarNotEn	       0x00000080 /* 1:Early Notify Enable	     */
+#define Int_DParErrEn	       0x00000040 /* 1:Detected Parity Error Enable  */
+#define Int_SSysErrEn	       0x00000020 /* 1:Signalled System Error Enable */
+#define Int_RMasAbtEn	       0x00000010 /* 1:Received Master Abort Enable  */
+#define Int_RTargAbtEn	       0x00000008 /* 1:Received Target Abort Enable  */
+#define Int_STargAbtEn	       0x00000004 /* 1:Signalled Target Abort Enable */
+#define Int_BLExEn	       0x00000002 /* 1:Buffer List Exhausted Enable  */
+#define Int_FDAExEn	       0x00000001 /* 1:Free Descriptor Area	     */
+					  /*		   Exhausted Enable  */
+
+/* Int_Src bit assign ------------------------------------------------------- */
+#define Int_NRabt	       0x00004000 /* 1:Non Recoverable error	     */
+#define Int_DmParErrStat       0x00002000 /* 1:DMA Parity Error & Clear	     */
+#define Int_BLEx	       0x00001000 /* 1:Buffer List Empty & Clear     */
+#define Int_FDAEx	       0x00000800 /* 1:FDA Empty & Clear	     */
+#define Int_IntNRAbt	       0x00000400 /* 1:Non Recoverable Abort	     */
+#define Int_IntCmp	       0x00000200 /* 1:MAC control packet complete   */
+#define Int_IntExBD	       0x00000100 /* 1:Interrupt Extra BD & Clear    */
+#define Int_DmParErr	       0x00000080 /* 1:DMA Parity Error & Clear	     */
+#define Int_IntEarNot	       0x00000040 /* 1:Receive Data write & Clear    */
+#define Int_SWInt	       0x00000020 /* 1:Software request & Clear	     */
+#define Int_IntBLEx	       0x00000010 /* 1:Buffer List Empty & Clear     */
+#define Int_IntFDAEx	       0x00000008 /* 1:FDA Empty & Clear	     */
+#define Int_IntPCI	       0x00000004 /* 1:PCI controller & Clear	     */
+#define Int_IntMacRx	       0x00000002 /* 1:Rx controller & Clear	     */
+#define Int_IntMacTx	       0x00000001 /* 1:Tx controller & Clear	     */
+
+/* MD_CA bit assign --------------------------------------------------------- */
+#define MD_CA_PreSup	       0x00001000 /* 1:Preamble Suppress		     */
+#define MD_CA_Busy	       0x00000800 /* 1:Busy (Start Operation)	     */
+#define MD_CA_Wr	       0x00000400 /* 1:Write 0:Read		     */
+
+
+/*
+ * Descriptors
+ */
+
+/* Frame descriptor */
+struct FDesc {
+	volatile __u32 FDNext;
+	volatile __u32 FDSystem;
+	volatile __u32 FDStat;
+	volatile __u32 FDCtl;
+};
+
+/* Buffer descriptor */
+struct BDesc {
+	volatile __u32 BuffData;
+	volatile __u32 BDCtl;
+};
+
+#define FD_ALIGN	16
+
+/* Frame Descriptor bit assign ---------------------------------------------- */
+#define FD_FDLength_MASK       0x0000FFFF /* Length MASK		     */
+#define FD_BDCnt_MASK	       0x001F0000 /* BD count MASK in FD	     */
+#define FD_FrmOpt_MASK	       0x7C000000 /* Frame option MASK		     */
+#define FD_FrmOpt_BigEndian    0x40000000 /* Tx/Rx */
+#define FD_FrmOpt_IntTx	       0x20000000 /* Tx only */
+#define FD_FrmOpt_NoCRC	       0x10000000 /* Tx only */
+#define FD_FrmOpt_NoPadding    0x08000000 /* Tx only */
+#define FD_FrmOpt_Packing      0x04000000 /* Rx only */
+#define FD_CownsFD	       0x80000000 /* FD Controller owner bit	     */
+#define FD_Next_EOL	       0x00000001 /* FD EOL indicator		     */
+#define FD_BDCnt_SHIFT	       16
+
+/* Buffer Descriptor bit assign --------------------------------------------- */
+#define BD_BuffLength_MASK     0x0000FFFF /* Receive Data Size		     */
+#define BD_RxBDID_MASK	       0x00FF0000 /* BD ID Number MASK		     */
+#define BD_RxBDSeqN_MASK       0x7F000000 /* Rx BD Sequence Number	     */
+#define BD_CownsBD	       0x80000000 /* BD Controller owner bit	     */
+#define BD_RxBDID_SHIFT	       16
+#define BD_RxBDSeqN_SHIFT      24
+
+
+/* Some useful constants. */
+
+#define TX_CTL_CMD	(Tx_EnTxPar | Tx_EnLateColl | \
+	Tx_EnExColl | Tx_EnLCarr | Tx_EnExDefer | Tx_EnUnder | \
+	Tx_En)	/* maybe  0x7b01 */
+/* Do not use Rx_StripCRC -- it causes trouble on BLEx/FDAEx condition */
+#define RX_CTL_CMD	(Rx_EnGood | Rx_EnRxPar | Rx_EnLongErr | Rx_EnOver \
+	| Rx_EnCRCErr | Rx_EnAlign | Rx_RxEn) /* maybe 0x6f01 */
+#define INT_EN_CMD  (Int_NRAbtEn | \
+	Int_DmParErrEn | Int_DParDEn | Int_DParErrEn | \
+	Int_SSysErrEn  | Int_RMasAbtEn | Int_RTargAbtEn | \
+	Int_STargAbtEn | \
+	Int_BLExEn  | Int_FDAExEn) /* maybe 0xb7f*/
+#define DMA_CTL_CMD	DMA_BURST_SIZE
+#define HAVE_DMA_RXALIGN(lp)	likely((lp)->chiptype != TC35815CF)
+
+/* Tuning parameters */
+#define DMA_BURST_SIZE	32
+#define TX_THRESHOLD	1024
+/* used threshold with packet max byte for low pci transfer ability.*/
+#define TX_THRESHOLD_MAX 1536
+/* setting threshold max value when overrun error occurred this count. */
+#define TX_THRESHOLD_KEEP_LIMIT 10
+
+/* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */
+#define FD_PAGE_NUM 4
+#define RX_BUF_NUM	128	/* < 256 */
+#define RX_FD_NUM	256	/* >= 32 */
+#define TX_FD_NUM	128
+#if RX_CTL_CMD & Rx_LongEn
+#define RX_BUF_SIZE	PAGE_SIZE
+#elif RX_CTL_CMD & Rx_StripCRC
+#define RX_BUF_SIZE	\
+	L1_CACHE_ALIGN(ETH_FRAME_LEN + VLAN_HLEN + NET_IP_ALIGN)
+#else
+#define RX_BUF_SIZE	\
+	L1_CACHE_ALIGN(ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN + NET_IP_ALIGN)
+#endif
+#define RX_FD_RESERVE	(2 / 2)	/* max 2 BD per RxFD */
+#define NAPI_WEIGHT	16
+
+struct TxFD {
+	struct FDesc fd;
+	struct BDesc bd;
+	struct BDesc unused;
+};
+
+struct RxFD {
+	struct FDesc fd;
+	struct BDesc bd[0];	/* variable length */
+};
+
+struct FrFD {
+	struct FDesc fd;
+	struct BDesc bd[RX_BUF_NUM];
+};
+
+
+#define tc_readl(addr)	ioread32(addr)
+#define tc_writel(d, addr)	iowrite32(d, addr)
+
+#define TC35815_TX_TIMEOUT  msecs_to_jiffies(400)
+
+/* Information that need to be kept for each controller. */
+struct tc35815_local {
+	struct pci_dev *pci_dev;
+
+	struct net_device *dev;
+	struct napi_struct napi;
+
+	/* statistics */
+	struct {
+		int max_tx_qlen;
+		int tx_ints;
+		int rx_ints;
+		int tx_underrun;
+	} lstats;
+
+	/* Tx control lock.  This protects the transmit buffer ring
+	 * state along with the "tx full" state of the driver.  This
+	 * means all netif_queue flow control actions are protected
+	 * by this lock as well.
+	 */
+	spinlock_t lock;
+	spinlock_t rx_lock;
+
+	struct mii_bus *mii_bus;
+	int duplex;
+	int speed;
+	int link;
+	struct work_struct restart_work;
+
+	/*
+	 * Transmitting: Batch Mode.
+	 *	1 BD in 1 TxFD.
+	 * Receiving: Non-Packing Mode.
+	 *	1 circular FD for Free Buffer List.
+	 *	RX_BUF_NUM BD in Free Buffer FD.
+	 *	One Free Buffer BD has ETH_FRAME_LEN data buffer.
+	 */
+	void *fd_buf;	/* for TxFD, RxFD, FrFD */
+	dma_addr_t fd_buf_dma;
+	struct TxFD *tfd_base;
+	unsigned int tfd_start;
+	unsigned int tfd_end;
+	struct RxFD *rfd_base;
+	struct RxFD *rfd_limit;
+	struct RxFD *rfd_cur;
+	struct FrFD *fbl_ptr;
+	unsigned int fbl_count;
+	struct {
+		struct sk_buff *skb;
+		dma_addr_t skb_dma;
+	} tx_skbs[TX_FD_NUM], rx_skbs[RX_BUF_NUM];
+	u32 msg_enable;
+	enum tc35815_chiptype chiptype;
+};
+
+static inline dma_addr_t fd_virt_to_bus(struct tc35815_local *lp, void *virt)
+{
+	return lp->fd_buf_dma + ((u8 *)virt - (u8 *)lp->fd_buf);
+}
+#ifdef DEBUG
+static inline void *fd_bus_to_virt(struct tc35815_local *lp, dma_addr_t bus)
+{
+	return (void *)((u8 *)lp->fd_buf + (bus - lp->fd_buf_dma));
+}
+#endif
+static struct sk_buff *alloc_rxbuf_skb(struct net_device *dev,
+				       struct pci_dev *hwdev,
+				       dma_addr_t *dma_handle)
+{
+	struct sk_buff *skb;
+	skb = netdev_alloc_skb(dev, RX_BUF_SIZE);
+	if (!skb)
+		return NULL;
+	*dma_handle = pci_map_single(hwdev, skb->data, RX_BUF_SIZE,
+				     PCI_DMA_FROMDEVICE);
+	if (pci_dma_mapping_error(hwdev, *dma_handle)) {
+		dev_kfree_skb_any(skb);
+		return NULL;
+	}
+	skb_reserve(skb, 2);	/* make IP header 4byte aligned */
+	return skb;
+}
+
+static void free_rxbuf_skb(struct pci_dev *hwdev, struct sk_buff *skb, dma_addr_t dma_handle)
+{
+	pci_unmap_single(hwdev, dma_handle, RX_BUF_SIZE,
+			 PCI_DMA_FROMDEVICE);
+	dev_kfree_skb_any(skb);
+}
+
+/* Index to functions, as function prototypes. */
+
+static int	tc35815_open(struct net_device *dev);
+static netdev_tx_t	tc35815_send_packet(struct sk_buff *skb,
+					    struct net_device *dev);
+static irqreturn_t	tc35815_interrupt(int irq, void *dev_id);
+static int	tc35815_rx(struct net_device *dev, int limit);
+static int	tc35815_poll(struct napi_struct *napi, int budget);
+static void	tc35815_txdone(struct net_device *dev);
+static int	tc35815_close(struct net_device *dev);
+static struct	net_device_stats *tc35815_get_stats(struct net_device *dev);
+static void	tc35815_set_multicast_list(struct net_device *dev);
+static void	tc35815_tx_timeout(struct net_device *dev);
+static int	tc35815_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void	tc35815_poll_controller(struct net_device *dev);
+#endif
+static const struct ethtool_ops tc35815_ethtool_ops;
+
+/* Example routines you must write ;->. */
+static void	tc35815_chip_reset(struct net_device *dev);
+static void	tc35815_chip_init(struct net_device *dev);
+
+#ifdef DEBUG
+static void	panic_queues(struct net_device *dev);
+#endif
+
+static void tc35815_restart_work(struct work_struct *work);
+
+static int tc_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct net_device *dev = bus->priv;
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+	unsigned long timeout = jiffies + HZ;
+
+	tc_writel(MD_CA_Busy | (mii_id << 5) | (regnum & 0x1f), &tr->MD_CA);
+	udelay(12); /* it takes 32 x 400ns at least */
+	while (tc_readl(&tr->MD_CA) & MD_CA_Busy) {
+		if (time_after(jiffies, timeout))
+			return -EIO;
+		cpu_relax();
+	}
+	return tc_readl(&tr->MD_Data) & 0xffff;
+}
+
+static int tc_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 val)
+{
+	struct net_device *dev = bus->priv;
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+	unsigned long timeout = jiffies + HZ;
+
+	tc_writel(val, &tr->MD_Data);
+	tc_writel(MD_CA_Busy | MD_CA_Wr | (mii_id << 5) | (regnum & 0x1f),
+		  &tr->MD_CA);
+	udelay(12); /* it takes 32 x 400ns at least */
+	while (tc_readl(&tr->MD_CA) & MD_CA_Busy) {
+		if (time_after(jiffies, timeout))
+			return -EIO;
+		cpu_relax();
+	}
+	return 0;
+}
+
+static void tc_handle_link_change(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	struct phy_device *phydev = dev->phydev;
+	unsigned long flags;
+	int status_change = 0;
+
+	spin_lock_irqsave(&lp->lock, flags);
+	if (phydev->link &&
+	    (lp->speed != phydev->speed || lp->duplex != phydev->duplex)) {
+		struct tc35815_regs __iomem *tr =
+			(struct tc35815_regs __iomem *)dev->base_addr;
+		u32 reg;
+
+		reg = tc_readl(&tr->MAC_Ctl);
+		reg |= MAC_HaltReq;
+		tc_writel(reg, &tr->MAC_Ctl);
+		if (phydev->duplex == DUPLEX_FULL)
+			reg |= MAC_FullDup;
+		else
+			reg &= ~MAC_FullDup;
+		tc_writel(reg, &tr->MAC_Ctl);
+		reg &= ~MAC_HaltReq;
+		tc_writel(reg, &tr->MAC_Ctl);
+
+		/*
+		 * TX4939 PCFG.SPEEDn bit will be changed on
+		 * NETDEV_CHANGE event.
+		 */
+		/*
+		 * WORKAROUND: enable LostCrS only if half duplex
+		 * operation.
+		 * (TX4939 does not have EnLCarr)
+		 */
+		if (phydev->duplex == DUPLEX_HALF &&
+		    lp->chiptype != TC35815_TX4939)
+			tc_writel(tc_readl(&tr->Tx_Ctl) | Tx_EnLCarr,
+				  &tr->Tx_Ctl);
+
+		lp->speed = phydev->speed;
+		lp->duplex = phydev->duplex;
+		status_change = 1;
+	}
+
+	if (phydev->link != lp->link) {
+		if (phydev->link) {
+			/* delayed promiscuous enabling */
+			if (dev->flags & IFF_PROMISC)
+				tc35815_set_multicast_list(dev);
+		} else {
+			lp->speed = 0;
+			lp->duplex = -1;
+		}
+		lp->link = phydev->link;
+
+		status_change = 1;
+	}
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+	if (status_change && netif_msg_link(lp)) {
+		phy_print_status(phydev);
+		pr_debug("%s: MII BMCR %04x BMSR %04x LPA %04x\n",
+			 dev->name,
+			 phy_read(phydev, MII_BMCR),
+			 phy_read(phydev, MII_BMSR),
+			 phy_read(phydev, MII_LPA));
+	}
+}
+
+static int tc_mii_probe(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	struct phy_device *phydev;
+	u32 dropmask;
+
+	phydev = phy_find_first(lp->mii_bus);
+	if (!phydev) {
+		printk(KERN_ERR "%s: no PHY found\n", dev->name);
+		return -ENODEV;
+	}
+
+	/* attach the mac to the phy */
+	phydev = phy_connect(dev, phydev_name(phydev),
+			     &tc_handle_link_change,
+			     lp->chiptype == TC35815_TX4939 ? PHY_INTERFACE_MODE_RMII : PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(phydev)) {
+		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+		return PTR_ERR(phydev);
+	}
+
+	phy_attached_info(phydev);
+
+	/* mask with MAC supported features */
+	phydev->supported &= PHY_BASIC_FEATURES;
+	dropmask = 0;
+	if (options.speed == 10)
+		dropmask |= SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
+	else if (options.speed == 100)
+		dropmask |= SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full;
+	if (options.duplex == 1)
+		dropmask |= SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full;
+	else if (options.duplex == 2)
+		dropmask |= SUPPORTED_10baseT_Half | SUPPORTED_100baseT_Half;
+	phydev->supported &= ~dropmask;
+	phydev->advertising = phydev->supported;
+
+	lp->link = 0;
+	lp->speed = 0;
+	lp->duplex = -1;
+
+	return 0;
+}
+
+static int tc_mii_init(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	int err;
+
+	lp->mii_bus = mdiobus_alloc();
+	if (lp->mii_bus == NULL) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	lp->mii_bus->name = "tc35815_mii_bus";
+	lp->mii_bus->read = tc_mdio_read;
+	lp->mii_bus->write = tc_mdio_write;
+	snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "%x",
+		 (lp->pci_dev->bus->number << 8) | lp->pci_dev->devfn);
+	lp->mii_bus->priv = dev;
+	lp->mii_bus->parent = &lp->pci_dev->dev;
+	err = mdiobus_register(lp->mii_bus);
+	if (err)
+		goto err_out_free_mii_bus;
+	err = tc_mii_probe(dev);
+	if (err)
+		goto err_out_unregister_bus;
+	return 0;
+
+err_out_unregister_bus:
+	mdiobus_unregister(lp->mii_bus);
+err_out_free_mii_bus:
+	mdiobus_free(lp->mii_bus);
+err_out:
+	return err;
+}
+
+#ifdef CONFIG_CPU_TX49XX
+/*
+ * Find a platform_device providing a MAC address.  The platform code
+ * should provide a "tc35815-mac" device with a MAC address in its
+ * platform_data.
+ */
+static int tc35815_mac_match(struct device *dev, void *data)
+{
+	struct platform_device *plat_dev = to_platform_device(dev);
+	struct pci_dev *pci_dev = data;
+	unsigned int id = pci_dev->irq;
+	return !strcmp(plat_dev->name, "tc35815-mac") && plat_dev->id == id;
+}
+
+static int tc35815_read_plat_dev_addr(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	struct device *pd = bus_find_device(&platform_bus_type, NULL,
+					    lp->pci_dev, tc35815_mac_match);
+	if (pd) {
+		if (pd->platform_data)
+			memcpy(dev->dev_addr, pd->platform_data, ETH_ALEN);
+		put_device(pd);
+		return is_valid_ether_addr(dev->dev_addr) ? 0 : -ENODEV;
+	}
+	return -ENODEV;
+}
+#else
+static int tc35815_read_plat_dev_addr(struct net_device *dev)
+{
+	return -ENODEV;
+}
+#endif
+
+static int tc35815_init_dev_addr(struct net_device *dev)
+{
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+	int i;
+
+	while (tc_readl(&tr->PROM_Ctl) & PROM_Busy)
+		;
+	for (i = 0; i < 6; i += 2) {
+		unsigned short data;
+		tc_writel(PROM_Busy | PROM_Read | (i / 2 + 2), &tr->PROM_Ctl);
+		while (tc_readl(&tr->PROM_Ctl) & PROM_Busy)
+			;
+		data = tc_readl(&tr->PROM_Data);
+		dev->dev_addr[i] = data & 0xff;
+		dev->dev_addr[i+1] = data >> 8;
+	}
+	if (!is_valid_ether_addr(dev->dev_addr))
+		return tc35815_read_plat_dev_addr(dev);
+	return 0;
+}
+
+static const struct net_device_ops tc35815_netdev_ops = {
+	.ndo_open		= tc35815_open,
+	.ndo_stop		= tc35815_close,
+	.ndo_start_xmit		= tc35815_send_packet,
+	.ndo_get_stats		= tc35815_get_stats,
+	.ndo_set_rx_mode	= tc35815_set_multicast_list,
+	.ndo_tx_timeout		= tc35815_tx_timeout,
+	.ndo_do_ioctl		= tc35815_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= tc35815_poll_controller,
+#endif
+};
+
+static int tc35815_init_one(struct pci_dev *pdev,
+			    const struct pci_device_id *ent)
+{
+	void __iomem *ioaddr = NULL;
+	struct net_device *dev;
+	struct tc35815_local *lp;
+	int rc;
+
+	static int printed_version;
+	if (!printed_version++) {
+		printk(version);
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			   "speed:%d duplex:%d\n",
+			   options.speed, options.duplex);
+	}
+
+	if (!pdev->irq) {
+		dev_warn(&pdev->dev, "no IRQ assigned.\n");
+		return -ENODEV;
+	}
+
+	/* dev zeroed in alloc_etherdev */
+	dev = alloc_etherdev(sizeof(*lp));
+	if (dev == NULL)
+		return -ENOMEM;
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	lp = netdev_priv(dev);
+	lp->dev = dev;
+
+	/* enable device (incl. PCI PM wakeup), and bus-mastering */
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		goto err_out;
+	rc = pcim_iomap_regions(pdev, 1 << 1, MODNAME);
+	if (rc)
+		goto err_out;
+	pci_set_master(pdev);
+	ioaddr = pcim_iomap_table(pdev)[1];
+
+	/* Initialize the device structure. */
+	dev->netdev_ops = &tc35815_netdev_ops;
+	dev->ethtool_ops = &tc35815_ethtool_ops;
+	dev->watchdog_timeo = TC35815_TX_TIMEOUT;
+	netif_napi_add(dev, &lp->napi, tc35815_poll, NAPI_WEIGHT);
+
+	dev->irq = pdev->irq;
+	dev->base_addr = (unsigned long)ioaddr;
+
+	INIT_WORK(&lp->restart_work, tc35815_restart_work);
+	spin_lock_init(&lp->lock);
+	spin_lock_init(&lp->rx_lock);
+	lp->pci_dev = pdev;
+	lp->chiptype = ent->driver_data;
+
+	lp->msg_enable = NETIF_MSG_TX_ERR | NETIF_MSG_HW | NETIF_MSG_DRV | NETIF_MSG_LINK;
+	pci_set_drvdata(pdev, dev);
+
+	/* Soft reset the chip. */
+	tc35815_chip_reset(dev);
+
+	/* Retrieve the ethernet address. */
+	if (tc35815_init_dev_addr(dev)) {
+		dev_warn(&pdev->dev, "not valid ether addr\n");
+		eth_hw_addr_random(dev);
+	}
+
+	rc = register_netdev(dev);
+	if (rc)
+		goto err_out;
+
+	printk(KERN_INFO "%s: %s at 0x%lx, %pM, IRQ %d\n",
+		dev->name,
+		chip_info[ent->driver_data].name,
+		dev->base_addr,
+		dev->dev_addr,
+		dev->irq);
+
+	rc = tc_mii_init(dev);
+	if (rc)
+		goto err_out_unregister;
+
+	return 0;
+
+err_out_unregister:
+	unregister_netdev(dev);
+err_out:
+	free_netdev(dev);
+	return rc;
+}
+
+
+static void tc35815_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct tc35815_local *lp = netdev_priv(dev);
+
+	phy_disconnect(dev->phydev);
+	mdiobus_unregister(lp->mii_bus);
+	mdiobus_free(lp->mii_bus);
+	unregister_netdev(dev);
+	free_netdev(dev);
+}
+
+static int
+tc35815_init_queues(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	int i;
+	unsigned long fd_addr;
+
+	if (!lp->fd_buf) {
+		BUG_ON(sizeof(struct FDesc) +
+		       sizeof(struct BDesc) * RX_BUF_NUM +
+		       sizeof(struct FDesc) * RX_FD_NUM +
+		       sizeof(struct TxFD) * TX_FD_NUM >
+		       PAGE_SIZE * FD_PAGE_NUM);
+
+		lp->fd_buf = pci_alloc_consistent(lp->pci_dev,
+						  PAGE_SIZE * FD_PAGE_NUM,
+						  &lp->fd_buf_dma);
+		if (!lp->fd_buf)
+			return -ENOMEM;
+		for (i = 0; i < RX_BUF_NUM; i++) {
+			lp->rx_skbs[i].skb =
+				alloc_rxbuf_skb(dev, lp->pci_dev,
+						&lp->rx_skbs[i].skb_dma);
+			if (!lp->rx_skbs[i].skb) {
+				while (--i >= 0) {
+					free_rxbuf_skb(lp->pci_dev,
+						       lp->rx_skbs[i].skb,
+						       lp->rx_skbs[i].skb_dma);
+					lp->rx_skbs[i].skb = NULL;
+				}
+				pci_free_consistent(lp->pci_dev,
+						    PAGE_SIZE * FD_PAGE_NUM,
+						    lp->fd_buf,
+						    lp->fd_buf_dma);
+				lp->fd_buf = NULL;
+				return -ENOMEM;
+			}
+		}
+		printk(KERN_DEBUG "%s: FD buf %p DataBuf",
+		       dev->name, lp->fd_buf);
+		printk("\n");
+	} else {
+		for (i = 0; i < FD_PAGE_NUM; i++)
+			clear_page((void *)((unsigned long)lp->fd_buf +
+					    i * PAGE_SIZE));
+	}
+	fd_addr = (unsigned long)lp->fd_buf;
+
+	/* Free Descriptors (for Receive) */
+	lp->rfd_base = (struct RxFD *)fd_addr;
+	fd_addr += sizeof(struct RxFD) * RX_FD_NUM;
+	for (i = 0; i < RX_FD_NUM; i++)
+		lp->rfd_base[i].fd.FDCtl = cpu_to_le32(FD_CownsFD);
+	lp->rfd_cur = lp->rfd_base;
+	lp->rfd_limit = (struct RxFD *)fd_addr - (RX_FD_RESERVE + 1);
+
+	/* Transmit Descriptors */
+	lp->tfd_base = (struct TxFD *)fd_addr;
+	fd_addr += sizeof(struct TxFD) * TX_FD_NUM;
+	for (i = 0; i < TX_FD_NUM; i++) {
+		lp->tfd_base[i].fd.FDNext = cpu_to_le32(fd_virt_to_bus(lp, &lp->tfd_base[i+1]));
+		lp->tfd_base[i].fd.FDSystem = cpu_to_le32(0xffffffff);
+		lp->tfd_base[i].fd.FDCtl = cpu_to_le32(0);
+	}
+	lp->tfd_base[TX_FD_NUM-1].fd.FDNext = cpu_to_le32(fd_virt_to_bus(lp, &lp->tfd_base[0]));
+	lp->tfd_start = 0;
+	lp->tfd_end = 0;
+
+	/* Buffer List (for Receive) */
+	lp->fbl_ptr = (struct FrFD *)fd_addr;
+	lp->fbl_ptr->fd.FDNext = cpu_to_le32(fd_virt_to_bus(lp, lp->fbl_ptr));
+	lp->fbl_ptr->fd.FDCtl = cpu_to_le32(RX_BUF_NUM | FD_CownsFD);
+	/*
+	 * move all allocated skbs to head of rx_skbs[] array.
+	 * fbl_count mighe not be RX_BUF_NUM if alloc_rxbuf_skb() in
+	 * tc35815_rx() had failed.
+	 */
+	lp->fbl_count = 0;
+	for (i = 0; i < RX_BUF_NUM; i++) {
+		if (lp->rx_skbs[i].skb) {
+			if (i != lp->fbl_count) {
+				lp->rx_skbs[lp->fbl_count].skb =
+					lp->rx_skbs[i].skb;
+				lp->rx_skbs[lp->fbl_count].skb_dma =
+					lp->rx_skbs[i].skb_dma;
+			}
+			lp->fbl_count++;
+		}
+	}
+	for (i = 0; i < RX_BUF_NUM; i++) {
+		if (i >= lp->fbl_count) {
+			lp->fbl_ptr->bd[i].BuffData = 0;
+			lp->fbl_ptr->bd[i].BDCtl = 0;
+			continue;
+		}
+		lp->fbl_ptr->bd[i].BuffData =
+			cpu_to_le32(lp->rx_skbs[i].skb_dma);
+		/* BDID is index of FrFD.bd[] */
+		lp->fbl_ptr->bd[i].BDCtl =
+			cpu_to_le32(BD_CownsBD | (i << BD_RxBDID_SHIFT) |
+				    RX_BUF_SIZE);
+	}
+
+	printk(KERN_DEBUG "%s: TxFD %p RxFD %p FrFD %p\n",
+	       dev->name, lp->tfd_base, lp->rfd_base, lp->fbl_ptr);
+	return 0;
+}
+
+static void
+tc35815_clear_queues(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	int i;
+
+	for (i = 0; i < TX_FD_NUM; i++) {
+		u32 fdsystem = le32_to_cpu(lp->tfd_base[i].fd.FDSystem);
+		struct sk_buff *skb =
+			fdsystem != 0xffffffff ?
+			lp->tx_skbs[fdsystem].skb : NULL;
+#ifdef DEBUG
+		if (lp->tx_skbs[i].skb != skb) {
+			printk("%s: tx_skbs mismatch(%d).\n", dev->name, i);
+			panic_queues(dev);
+		}
+#else
+		BUG_ON(lp->tx_skbs[i].skb != skb);
+#endif
+		if (skb) {
+			pci_unmap_single(lp->pci_dev, lp->tx_skbs[i].skb_dma, skb->len, PCI_DMA_TODEVICE);
+			lp->tx_skbs[i].skb = NULL;
+			lp->tx_skbs[i].skb_dma = 0;
+			dev_kfree_skb_any(skb);
+		}
+		lp->tfd_base[i].fd.FDSystem = cpu_to_le32(0xffffffff);
+	}
+
+	tc35815_init_queues(dev);
+}
+
+static void
+tc35815_free_queues(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	int i;
+
+	if (lp->tfd_base) {
+		for (i = 0; i < TX_FD_NUM; i++) {
+			u32 fdsystem = le32_to_cpu(lp->tfd_base[i].fd.FDSystem);
+			struct sk_buff *skb =
+				fdsystem != 0xffffffff ?
+				lp->tx_skbs[fdsystem].skb : NULL;
+#ifdef DEBUG
+			if (lp->tx_skbs[i].skb != skb) {
+				printk("%s: tx_skbs mismatch(%d).\n", dev->name, i);
+				panic_queues(dev);
+			}
+#else
+			BUG_ON(lp->tx_skbs[i].skb != skb);
+#endif
+			if (skb) {
+				pci_unmap_single(lp->pci_dev, lp->tx_skbs[i].skb_dma, skb->len, PCI_DMA_TODEVICE);
+				dev_kfree_skb(skb);
+				lp->tx_skbs[i].skb = NULL;
+				lp->tx_skbs[i].skb_dma = 0;
+			}
+			lp->tfd_base[i].fd.FDSystem = cpu_to_le32(0xffffffff);
+		}
+	}
+
+	lp->rfd_base = NULL;
+	lp->rfd_limit = NULL;
+	lp->rfd_cur = NULL;
+	lp->fbl_ptr = NULL;
+
+	for (i = 0; i < RX_BUF_NUM; i++) {
+		if (lp->rx_skbs[i].skb) {
+			free_rxbuf_skb(lp->pci_dev, lp->rx_skbs[i].skb,
+				       lp->rx_skbs[i].skb_dma);
+			lp->rx_skbs[i].skb = NULL;
+		}
+	}
+	if (lp->fd_buf) {
+		pci_free_consistent(lp->pci_dev, PAGE_SIZE * FD_PAGE_NUM,
+				    lp->fd_buf, lp->fd_buf_dma);
+		lp->fd_buf = NULL;
+	}
+}
+
+static void
+dump_txfd(struct TxFD *fd)
+{
+	printk("TxFD(%p): %08x %08x %08x %08x\n", fd,
+	       le32_to_cpu(fd->fd.FDNext),
+	       le32_to_cpu(fd->fd.FDSystem),
+	       le32_to_cpu(fd->fd.FDStat),
+	       le32_to_cpu(fd->fd.FDCtl));
+	printk("BD: ");
+	printk(" %08x %08x",
+	       le32_to_cpu(fd->bd.BuffData),
+	       le32_to_cpu(fd->bd.BDCtl));
+	printk("\n");
+}
+
+static int
+dump_rxfd(struct RxFD *fd)
+{
+	int i, bd_count = (le32_to_cpu(fd->fd.FDCtl) & FD_BDCnt_MASK) >> FD_BDCnt_SHIFT;
+	if (bd_count > 8)
+		bd_count = 8;
+	printk("RxFD(%p): %08x %08x %08x %08x\n", fd,
+	       le32_to_cpu(fd->fd.FDNext),
+	       le32_to_cpu(fd->fd.FDSystem),
+	       le32_to_cpu(fd->fd.FDStat),
+	       le32_to_cpu(fd->fd.FDCtl));
+	if (le32_to_cpu(fd->fd.FDCtl) & FD_CownsFD)
+		return 0;
+	printk("BD: ");
+	for (i = 0; i < bd_count; i++)
+		printk(" %08x %08x",
+		       le32_to_cpu(fd->bd[i].BuffData),
+		       le32_to_cpu(fd->bd[i].BDCtl));
+	printk("\n");
+	return bd_count;
+}
+
+#ifdef DEBUG
+static void
+dump_frfd(struct FrFD *fd)
+{
+	int i;
+	printk("FrFD(%p): %08x %08x %08x %08x\n", fd,
+	       le32_to_cpu(fd->fd.FDNext),
+	       le32_to_cpu(fd->fd.FDSystem),
+	       le32_to_cpu(fd->fd.FDStat),
+	       le32_to_cpu(fd->fd.FDCtl));
+	printk("BD: ");
+	for (i = 0; i < RX_BUF_NUM; i++)
+		printk(" %08x %08x",
+		       le32_to_cpu(fd->bd[i].BuffData),
+		       le32_to_cpu(fd->bd[i].BDCtl));
+	printk("\n");
+}
+
+static void
+panic_queues(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	int i;
+
+	printk("TxFD base %p, start %u, end %u\n",
+	       lp->tfd_base, lp->tfd_start, lp->tfd_end);
+	printk("RxFD base %p limit %p cur %p\n",
+	       lp->rfd_base, lp->rfd_limit, lp->rfd_cur);
+	printk("FrFD %p\n", lp->fbl_ptr);
+	for (i = 0; i < TX_FD_NUM; i++)
+		dump_txfd(&lp->tfd_base[i]);
+	for (i = 0; i < RX_FD_NUM; i++) {
+		int bd_count = dump_rxfd(&lp->rfd_base[i]);
+		i += (bd_count + 1) / 2;	/* skip BDs */
+	}
+	dump_frfd(lp->fbl_ptr);
+	panic("%s: Illegal queue state.", dev->name);
+}
+#endif
+
+static void print_eth(const u8 *add)
+{
+	printk(KERN_DEBUG "print_eth(%p)\n", add);
+	printk(KERN_DEBUG " %pM => %pM : %02x%02x\n",
+		add + 6, add, add[12], add[13]);
+}
+
+static int tc35815_tx_full(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	return (lp->tfd_start + 1) % TX_FD_NUM == lp->tfd_end;
+}
+
+static void tc35815_restart(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	int ret;
+
+	if (dev->phydev) {
+		ret = phy_init_hw(dev->phydev);
+		if (ret)
+			printk(KERN_ERR "%s: PHY init failed.\n", dev->name);
+	}
+
+	spin_lock_bh(&lp->rx_lock);
+	spin_lock_irq(&lp->lock);
+	tc35815_chip_reset(dev);
+	tc35815_clear_queues(dev);
+	tc35815_chip_init(dev);
+	/* Reconfigure CAM again since tc35815_chip_init() initialize it. */
+	tc35815_set_multicast_list(dev);
+	spin_unlock_irq(&lp->lock);
+	spin_unlock_bh(&lp->rx_lock);
+
+	netif_wake_queue(dev);
+}
+
+static void tc35815_restart_work(struct work_struct *work)
+{
+	struct tc35815_local *lp =
+		container_of(work, struct tc35815_local, restart_work);
+	struct net_device *dev = lp->dev;
+
+	tc35815_restart(dev);
+}
+
+static void tc35815_schedule_restart(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+	unsigned long flags;
+
+	/* disable interrupts */
+	spin_lock_irqsave(&lp->lock, flags);
+	tc_writel(0, &tr->Int_En);
+	tc_writel(tc_readl(&tr->DMA_Ctl) | DMA_IntMask, &tr->DMA_Ctl);
+	schedule_work(&lp->restart_work);
+	spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+static void tc35815_tx_timeout(struct net_device *dev)
+{
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+
+	printk(KERN_WARNING "%s: transmit timed out, status %#x\n",
+	       dev->name, tc_readl(&tr->Tx_Stat));
+
+	/* Try to restart the adaptor. */
+	tc35815_schedule_restart(dev);
+	dev->stats.tx_errors++;
+}
+
+/*
+ * Open/initialize the controller. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int
+tc35815_open(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+
+	/*
+	 * This is used if the interrupt line can turned off (shared).
+	 * See 3c503.c for an example of selecting the IRQ at config-time.
+	 */
+	if (request_irq(dev->irq, tc35815_interrupt, IRQF_SHARED,
+			dev->name, dev))
+		return -EAGAIN;
+
+	tc35815_chip_reset(dev);
+
+	if (tc35815_init_queues(dev) != 0) {
+		free_irq(dev->irq, dev);
+		return -EAGAIN;
+	}
+
+	napi_enable(&lp->napi);
+
+	/* Reset the hardware here. Don't forget to set the station address. */
+	spin_lock_irq(&lp->lock);
+	tc35815_chip_init(dev);
+	spin_unlock_irq(&lp->lock);
+
+	netif_carrier_off(dev);
+	/* schedule a link state check */
+	phy_start(dev->phydev);
+
+	/* We are now ready to accept transmit requeusts from
+	 * the queueing layer of the networking.
+	 */
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+/* This will only be invoked if your driver is _not_ in XOFF state.
+ * What this means is that you need not check it, and that this
+ * invariant will hold if you make sure that the netif_*_queue()
+ * calls are done at the proper times.
+ */
+static netdev_tx_t
+tc35815_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	struct TxFD *txfd;
+	unsigned long flags;
+
+	/* If some error occurs while trying to transmit this
+	 * packet, you should return '1' from this function.
+	 * In such a case you _may not_ do anything to the
+	 * SKB, it is still owned by the network queueing
+	 * layer when an error is returned.  This means you
+	 * may not modify any SKB fields, you may not free
+	 * the SKB, etc.
+	 */
+
+	/* This is the most common case for modern hardware.
+	 * The spinlock protects this code from the TX complete
+	 * hardware interrupt handler.  Queue flow control is
+	 * thus managed under this lock as well.
+	 */
+	spin_lock_irqsave(&lp->lock, flags);
+
+	/* failsafe... (handle txdone now if half of FDs are used) */
+	if ((lp->tfd_start + TX_FD_NUM - lp->tfd_end) % TX_FD_NUM >
+	    TX_FD_NUM / 2)
+		tc35815_txdone(dev);
+
+	if (netif_msg_pktdata(lp))
+		print_eth(skb->data);
+#ifdef DEBUG
+	if (lp->tx_skbs[lp->tfd_start].skb) {
+		printk("%s: tx_skbs conflict.\n", dev->name);
+		panic_queues(dev);
+	}
+#else
+	BUG_ON(lp->tx_skbs[lp->tfd_start].skb);
+#endif
+	lp->tx_skbs[lp->tfd_start].skb = skb;
+	lp->tx_skbs[lp->tfd_start].skb_dma = pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
+
+	/*add to ring */
+	txfd = &lp->tfd_base[lp->tfd_start];
+	txfd->bd.BuffData = cpu_to_le32(lp->tx_skbs[lp->tfd_start].skb_dma);
+	txfd->bd.BDCtl = cpu_to_le32(skb->len);
+	txfd->fd.FDSystem = cpu_to_le32(lp->tfd_start);
+	txfd->fd.FDCtl = cpu_to_le32(FD_CownsFD | (1 << FD_BDCnt_SHIFT));
+
+	if (lp->tfd_start == lp->tfd_end) {
+		struct tc35815_regs __iomem *tr =
+			(struct tc35815_regs __iomem *)dev->base_addr;
+		/* Start DMA Transmitter. */
+		txfd->fd.FDNext |= cpu_to_le32(FD_Next_EOL);
+		txfd->fd.FDCtl |= cpu_to_le32(FD_FrmOpt_IntTx);
+		if (netif_msg_tx_queued(lp)) {
+			printk("%s: starting TxFD.\n", dev->name);
+			dump_txfd(txfd);
+		}
+		tc_writel(fd_virt_to_bus(lp, txfd), &tr->TxFrmPtr);
+	} else {
+		txfd->fd.FDNext &= cpu_to_le32(~FD_Next_EOL);
+		if (netif_msg_tx_queued(lp)) {
+			printk("%s: queueing TxFD.\n", dev->name);
+			dump_txfd(txfd);
+		}
+	}
+	lp->tfd_start = (lp->tfd_start + 1) % TX_FD_NUM;
+
+	/* If we just used up the very last entry in the
+	 * TX ring on this device, tell the queueing
+	 * layer to send no more.
+	 */
+	if (tc35815_tx_full(dev)) {
+		if (netif_msg_tx_queued(lp))
+			printk(KERN_WARNING "%s: TxFD Exhausted.\n", dev->name);
+		netif_stop_queue(dev);
+	}
+
+	/* When the TX completion hw interrupt arrives, this
+	 * is when the transmit statistics are updated.
+	 */
+
+	spin_unlock_irqrestore(&lp->lock, flags);
+	return NETDEV_TX_OK;
+}
+
+#define FATAL_ERROR_INT \
+	(Int_IntPCI | Int_DmParErr | Int_IntNRAbt)
+static void tc35815_fatal_error_interrupt(struct net_device *dev, u32 status)
+{
+	static int count;
+	printk(KERN_WARNING "%s: Fatal Error Interrupt (%#x):",
+	       dev->name, status);
+	if (status & Int_IntPCI)
+		printk(" IntPCI");
+	if (status & Int_DmParErr)
+		printk(" DmParErr");
+	if (status & Int_IntNRAbt)
+		printk(" IntNRAbt");
+	printk("\n");
+	if (count++ > 100)
+		panic("%s: Too many fatal errors.", dev->name);
+	printk(KERN_WARNING "%s: Resetting ...\n", dev->name);
+	/* Try to restart the adaptor. */
+	tc35815_schedule_restart(dev);
+}
+
+static int tc35815_do_interrupt(struct net_device *dev, u32 status, int limit)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	int ret = -1;
+
+	/* Fatal errors... */
+	if (status & FATAL_ERROR_INT) {
+		tc35815_fatal_error_interrupt(dev, status);
+		return 0;
+	}
+	/* recoverable errors */
+	if (status & Int_IntFDAEx) {
+		if (netif_msg_rx_err(lp))
+			dev_warn(&dev->dev,
+				 "Free Descriptor Area Exhausted (%#x).\n",
+				 status);
+		dev->stats.rx_dropped++;
+		ret = 0;
+	}
+	if (status & Int_IntBLEx) {
+		if (netif_msg_rx_err(lp))
+			dev_warn(&dev->dev,
+				 "Buffer List Exhausted (%#x).\n",
+				 status);
+		dev->stats.rx_dropped++;
+		ret = 0;
+	}
+	if (status & Int_IntExBD) {
+		if (netif_msg_rx_err(lp))
+			dev_warn(&dev->dev,
+				 "Excessive Buffer Descriptors (%#x).\n",
+				 status);
+		dev->stats.rx_length_errors++;
+		ret = 0;
+	}
+
+	/* normal notification */
+	if (status & Int_IntMacRx) {
+		/* Got a packet(s). */
+		ret = tc35815_rx(dev, limit);
+		lp->lstats.rx_ints++;
+	}
+	if (status & Int_IntMacTx) {
+		/* Transmit complete. */
+		lp->lstats.tx_ints++;
+		spin_lock_irq(&lp->lock);
+		tc35815_txdone(dev);
+		spin_unlock_irq(&lp->lock);
+		if (ret < 0)
+			ret = 0;
+	}
+	return ret;
+}
+
+/*
+ * The typical workload of the driver:
+ * Handle the network interface interrupts.
+ */
+static irqreturn_t tc35815_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct tc35815_local *lp = netdev_priv(dev);
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+	u32 dmactl = tc_readl(&tr->DMA_Ctl);
+
+	if (!(dmactl & DMA_IntMask)) {
+		/* disable interrupts */
+		tc_writel(dmactl | DMA_IntMask, &tr->DMA_Ctl);
+		if (napi_schedule_prep(&lp->napi))
+			__napi_schedule(&lp->napi);
+		else {
+			printk(KERN_ERR "%s: interrupt taken in poll\n",
+			       dev->name);
+			BUG();
+		}
+		(void)tc_readl(&tr->Int_Src);	/* flush */
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void tc35815_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	tc35815_interrupt(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+/* We have a good packet(s), get it/them out of the buffers. */
+static int
+tc35815_rx(struct net_device *dev, int limit)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	unsigned int fdctl;
+	int i;
+	int received = 0;
+
+	while (!((fdctl = le32_to_cpu(lp->rfd_cur->fd.FDCtl)) & FD_CownsFD)) {
+		int status = le32_to_cpu(lp->rfd_cur->fd.FDStat);
+		int pkt_len = fdctl & FD_FDLength_MASK;
+		int bd_count = (fdctl & FD_BDCnt_MASK) >> FD_BDCnt_SHIFT;
+#ifdef DEBUG
+		struct RxFD *next_rfd;
+#endif
+#if (RX_CTL_CMD & Rx_StripCRC) == 0
+		pkt_len -= ETH_FCS_LEN;
+#endif
+
+		if (netif_msg_rx_status(lp))
+			dump_rxfd(lp->rfd_cur);
+		if (status & Rx_Good) {
+			struct sk_buff *skb;
+			unsigned char *data;
+			int cur_bd;
+
+			if (--limit < 0)
+				break;
+			BUG_ON(bd_count > 1);
+			cur_bd = (le32_to_cpu(lp->rfd_cur->bd[0].BDCtl)
+				  & BD_RxBDID_MASK) >> BD_RxBDID_SHIFT;
+#ifdef DEBUG
+			if (cur_bd >= RX_BUF_NUM) {
+				printk("%s: invalid BDID.\n", dev->name);
+				panic_queues(dev);
+			}
+			BUG_ON(lp->rx_skbs[cur_bd].skb_dma !=
+			       (le32_to_cpu(lp->rfd_cur->bd[0].BuffData) & ~3));
+			if (!lp->rx_skbs[cur_bd].skb) {
+				printk("%s: NULL skb.\n", dev->name);
+				panic_queues(dev);
+			}
+#else
+			BUG_ON(cur_bd >= RX_BUF_NUM);
+#endif
+			skb = lp->rx_skbs[cur_bd].skb;
+			prefetch(skb->data);
+			lp->rx_skbs[cur_bd].skb = NULL;
+			pci_unmap_single(lp->pci_dev,
+					 lp->rx_skbs[cur_bd].skb_dma,
+					 RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+			if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN != 0)
+				memmove(skb->data, skb->data - NET_IP_ALIGN,
+					pkt_len);
+			data = skb_put(skb, pkt_len);
+			if (netif_msg_pktdata(lp))
+				print_eth(data);
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_receive_skb(skb);
+			received++;
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += pkt_len;
+		} else {
+			dev->stats.rx_errors++;
+			if (netif_msg_rx_err(lp))
+				dev_info(&dev->dev, "Rx error (status %x)\n",
+					 status & Rx_Stat_Mask);
+			/* WORKAROUND: LongErr and CRCErr means Overflow. */
+			if ((status & Rx_LongErr) && (status & Rx_CRCErr)) {
+				status &= ~(Rx_LongErr|Rx_CRCErr);
+				status |= Rx_Over;
+			}
+			if (status & Rx_LongErr)
+				dev->stats.rx_length_errors++;
+			if (status & Rx_Over)
+				dev->stats.rx_fifo_errors++;
+			if (status & Rx_CRCErr)
+				dev->stats.rx_crc_errors++;
+			if (status & Rx_Align)
+				dev->stats.rx_frame_errors++;
+		}
+
+		if (bd_count > 0) {
+			/* put Free Buffer back to controller */
+			int bdctl = le32_to_cpu(lp->rfd_cur->bd[bd_count - 1].BDCtl);
+			unsigned char id =
+				(bdctl & BD_RxBDID_MASK) >> BD_RxBDID_SHIFT;
+#ifdef DEBUG
+			if (id >= RX_BUF_NUM) {
+				printk("%s: invalid BDID.\n", dev->name);
+				panic_queues(dev);
+			}
+#else
+			BUG_ON(id >= RX_BUF_NUM);
+#endif
+			/* free old buffers */
+			lp->fbl_count--;
+			while (lp->fbl_count < RX_BUF_NUM)
+			{
+				unsigned char curid =
+					(id + 1 + lp->fbl_count) % RX_BUF_NUM;
+				struct BDesc *bd = &lp->fbl_ptr->bd[curid];
+#ifdef DEBUG
+				bdctl = le32_to_cpu(bd->BDCtl);
+				if (bdctl & BD_CownsBD) {
+					printk("%s: Freeing invalid BD.\n",
+					       dev->name);
+					panic_queues(dev);
+				}
+#endif
+				/* pass BD to controller */
+				if (!lp->rx_skbs[curid].skb) {
+					lp->rx_skbs[curid].skb =
+						alloc_rxbuf_skb(dev,
+								lp->pci_dev,
+								&lp->rx_skbs[curid].skb_dma);
+					if (!lp->rx_skbs[curid].skb)
+						break; /* try on next reception */
+					bd->BuffData = cpu_to_le32(lp->rx_skbs[curid].skb_dma);
+				}
+				/* Note: BDLength was modified by chip. */
+				bd->BDCtl = cpu_to_le32(BD_CownsBD |
+							(curid << BD_RxBDID_SHIFT) |
+							RX_BUF_SIZE);
+				lp->fbl_count++;
+			}
+		}
+
+		/* put RxFD back to controller */
+#ifdef DEBUG
+		next_rfd = fd_bus_to_virt(lp,
+					  le32_to_cpu(lp->rfd_cur->fd.FDNext));
+		if (next_rfd < lp->rfd_base || next_rfd > lp->rfd_limit) {
+			printk("%s: RxFD FDNext invalid.\n", dev->name);
+			panic_queues(dev);
+		}
+#endif
+		for (i = 0; i < (bd_count + 1) / 2 + 1; i++) {
+			/* pass FD to controller */
+#ifdef DEBUG
+			lp->rfd_cur->fd.FDNext = cpu_to_le32(0xdeaddead);
+#else
+			lp->rfd_cur->fd.FDNext = cpu_to_le32(FD_Next_EOL);
+#endif
+			lp->rfd_cur->fd.FDCtl = cpu_to_le32(FD_CownsFD);
+			lp->rfd_cur++;
+		}
+		if (lp->rfd_cur > lp->rfd_limit)
+			lp->rfd_cur = lp->rfd_base;
+#ifdef DEBUG
+		if (lp->rfd_cur != next_rfd)
+			printk("rfd_cur = %p, next_rfd %p\n",
+			       lp->rfd_cur, next_rfd);
+#endif
+	}
+
+	return received;
+}
+
+static int tc35815_poll(struct napi_struct *napi, int budget)
+{
+	struct tc35815_local *lp = container_of(napi, struct tc35815_local, napi);
+	struct net_device *dev = lp->dev;
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+	int received = 0, handled;
+	u32 status;
+
+	if (budget <= 0)
+		return received;
+
+	spin_lock(&lp->rx_lock);
+	status = tc_readl(&tr->Int_Src);
+	do {
+		/* BLEx, FDAEx will be cleared later */
+		tc_writel(status & ~(Int_BLEx | Int_FDAEx),
+			  &tr->Int_Src);	/* write to clear */
+
+		handled = tc35815_do_interrupt(dev, status, budget - received);
+		if (status & (Int_BLEx | Int_FDAEx))
+			tc_writel(status & (Int_BLEx | Int_FDAEx),
+				  &tr->Int_Src);
+		if (handled >= 0) {
+			received += handled;
+			if (received >= budget)
+				break;
+		}
+		status = tc_readl(&tr->Int_Src);
+	} while (status);
+	spin_unlock(&lp->rx_lock);
+
+	if (received < budget) {
+		napi_complete_done(napi, received);
+		/* enable interrupts */
+		tc_writel(tc_readl(&tr->DMA_Ctl) & ~DMA_IntMask, &tr->DMA_Ctl);
+	}
+	return received;
+}
+
+#define TX_STA_ERR	(Tx_ExColl|Tx_Under|Tx_Defer|Tx_NCarr|Tx_LateColl|Tx_TxPar|Tx_SQErr)
+
+static void
+tc35815_check_tx_stat(struct net_device *dev, int status)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	const char *msg = NULL;
+
+	/* count collisions */
+	if (status & Tx_ExColl)
+		dev->stats.collisions += 16;
+	if (status & Tx_TxColl_MASK)
+		dev->stats.collisions += status & Tx_TxColl_MASK;
+
+	/* TX4939 does not have NCarr */
+	if (lp->chiptype == TC35815_TX4939)
+		status &= ~Tx_NCarr;
+	/* WORKAROUND: ignore LostCrS in full duplex operation */
+	if (!lp->link || lp->duplex == DUPLEX_FULL)
+		status &= ~Tx_NCarr;
+
+	if (!(status & TX_STA_ERR)) {
+		/* no error. */
+		dev->stats.tx_packets++;
+		return;
+	}
+
+	dev->stats.tx_errors++;
+	if (status & Tx_ExColl) {
+		dev->stats.tx_aborted_errors++;
+		msg = "Excessive Collision.";
+	}
+	if (status & Tx_Under) {
+		dev->stats.tx_fifo_errors++;
+		msg = "Tx FIFO Underrun.";
+		if (lp->lstats.tx_underrun < TX_THRESHOLD_KEEP_LIMIT) {
+			lp->lstats.tx_underrun++;
+			if (lp->lstats.tx_underrun >= TX_THRESHOLD_KEEP_LIMIT) {
+				struct tc35815_regs __iomem *tr =
+					(struct tc35815_regs __iomem *)dev->base_addr;
+				tc_writel(TX_THRESHOLD_MAX, &tr->TxThrsh);
+				msg = "Tx FIFO Underrun.Change Tx threshold to max.";
+			}
+		}
+	}
+	if (status & Tx_Defer) {
+		dev->stats.tx_fifo_errors++;
+		msg = "Excessive Deferral.";
+	}
+	if (status & Tx_NCarr) {
+		dev->stats.tx_carrier_errors++;
+		msg = "Lost Carrier Sense.";
+	}
+	if (status & Tx_LateColl) {
+		dev->stats.tx_aborted_errors++;
+		msg = "Late Collision.";
+	}
+	if (status & Tx_TxPar) {
+		dev->stats.tx_fifo_errors++;
+		msg = "Transmit Parity Error.";
+	}
+	if (status & Tx_SQErr) {
+		dev->stats.tx_heartbeat_errors++;
+		msg = "Signal Quality Error.";
+	}
+	if (msg && netif_msg_tx_err(lp))
+		printk(KERN_WARNING "%s: %s (%#x)\n", dev->name, msg, status);
+}
+
+/* This handles TX complete events posted by the device
+ * via interrupts.
+ */
+static void
+tc35815_txdone(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	struct TxFD *txfd;
+	unsigned int fdctl;
+
+	txfd = &lp->tfd_base[lp->tfd_end];
+	while (lp->tfd_start != lp->tfd_end &&
+	       !((fdctl = le32_to_cpu(txfd->fd.FDCtl)) & FD_CownsFD)) {
+		int status = le32_to_cpu(txfd->fd.FDStat);
+		struct sk_buff *skb;
+		unsigned long fdnext = le32_to_cpu(txfd->fd.FDNext);
+		u32 fdsystem = le32_to_cpu(txfd->fd.FDSystem);
+
+		if (netif_msg_tx_done(lp)) {
+			printk("%s: complete TxFD.\n", dev->name);
+			dump_txfd(txfd);
+		}
+		tc35815_check_tx_stat(dev, status);
+
+		skb = fdsystem != 0xffffffff ?
+			lp->tx_skbs[fdsystem].skb : NULL;
+#ifdef DEBUG
+		if (lp->tx_skbs[lp->tfd_end].skb != skb) {
+			printk("%s: tx_skbs mismatch.\n", dev->name);
+			panic_queues(dev);
+		}
+#else
+		BUG_ON(lp->tx_skbs[lp->tfd_end].skb != skb);
+#endif
+		if (skb) {
+			dev->stats.tx_bytes += skb->len;
+			pci_unmap_single(lp->pci_dev, lp->tx_skbs[lp->tfd_end].skb_dma, skb->len, PCI_DMA_TODEVICE);
+			lp->tx_skbs[lp->tfd_end].skb = NULL;
+			lp->tx_skbs[lp->tfd_end].skb_dma = 0;
+			dev_kfree_skb_any(skb);
+		}
+		txfd->fd.FDSystem = cpu_to_le32(0xffffffff);
+
+		lp->tfd_end = (lp->tfd_end + 1) % TX_FD_NUM;
+		txfd = &lp->tfd_base[lp->tfd_end];
+#ifdef DEBUG
+		if ((fdnext & ~FD_Next_EOL) != fd_virt_to_bus(lp, txfd)) {
+			printk("%s: TxFD FDNext invalid.\n", dev->name);
+			panic_queues(dev);
+		}
+#endif
+		if (fdnext & FD_Next_EOL) {
+			/* DMA Transmitter has been stopping... */
+			if (lp->tfd_end != lp->tfd_start) {
+				struct tc35815_regs __iomem *tr =
+					(struct tc35815_regs __iomem *)dev->base_addr;
+				int head = (lp->tfd_start + TX_FD_NUM - 1) % TX_FD_NUM;
+				struct TxFD *txhead = &lp->tfd_base[head];
+				int qlen = (lp->tfd_start + TX_FD_NUM
+					    - lp->tfd_end) % TX_FD_NUM;
+
+#ifdef DEBUG
+				if (!(le32_to_cpu(txfd->fd.FDCtl) & FD_CownsFD)) {
+					printk("%s: TxFD FDCtl invalid.\n", dev->name);
+					panic_queues(dev);
+				}
+#endif
+				/* log max queue length */
+				if (lp->lstats.max_tx_qlen < qlen)
+					lp->lstats.max_tx_qlen = qlen;
+
+
+				/* start DMA Transmitter again */
+				txhead->fd.FDNext |= cpu_to_le32(FD_Next_EOL);
+				txhead->fd.FDCtl |= cpu_to_le32(FD_FrmOpt_IntTx);
+				if (netif_msg_tx_queued(lp)) {
+					printk("%s: start TxFD on queue.\n",
+					       dev->name);
+					dump_txfd(txfd);
+				}
+				tc_writel(fd_virt_to_bus(lp, txfd), &tr->TxFrmPtr);
+			}
+			break;
+		}
+	}
+
+	/* If we had stopped the queue due to a "tx full"
+	 * condition, and space has now been made available,
+	 * wake up the queue.
+	 */
+	if (netif_queue_stopped(dev) && !tc35815_tx_full(dev))
+		netif_wake_queue(dev);
+}
+
+/* The inverse routine to tc35815_open(). */
+static int
+tc35815_close(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+	napi_disable(&lp->napi);
+	if (dev->phydev)
+		phy_stop(dev->phydev);
+	cancel_work_sync(&lp->restart_work);
+
+	/* Flush the Tx and disable Rx here. */
+	tc35815_chip_reset(dev);
+	free_irq(dev->irq, dev);
+
+	tc35815_free_queues(dev);
+
+	return 0;
+
+}
+
+/*
+ * Get the current statistics.
+ * This may be called with the card open or closed.
+ */
+static struct net_device_stats *tc35815_get_stats(struct net_device *dev)
+{
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+	if (netif_running(dev))
+		/* Update the statistics from the device registers. */
+		dev->stats.rx_missed_errors += tc_readl(&tr->Miss_Cnt);
+
+	return &dev->stats;
+}
+
+static void tc35815_set_cam_entry(struct net_device *dev, int index, unsigned char *addr)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+	int cam_index = index * 6;
+	u32 cam_data;
+	u32 saved_addr;
+
+	saved_addr = tc_readl(&tr->CAM_Adr);
+
+	if (netif_msg_hw(lp))
+		printk(KERN_DEBUG "%s: CAM %d: %pM\n",
+			dev->name, index, addr);
+	if (index & 1) {
+		/* read modify write */
+		tc_writel(cam_index - 2, &tr->CAM_Adr);
+		cam_data = tc_readl(&tr->CAM_Data) & 0xffff0000;
+		cam_data |= addr[0] << 8 | addr[1];
+		tc_writel(cam_data, &tr->CAM_Data);
+		/* write whole word */
+		tc_writel(cam_index + 2, &tr->CAM_Adr);
+		cam_data = (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) | addr[5];
+		tc_writel(cam_data, &tr->CAM_Data);
+	} else {
+		/* write whole word */
+		tc_writel(cam_index, &tr->CAM_Adr);
+		cam_data = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
+		tc_writel(cam_data, &tr->CAM_Data);
+		/* read modify write */
+		tc_writel(cam_index + 4, &tr->CAM_Adr);
+		cam_data = tc_readl(&tr->CAM_Data) & 0x0000ffff;
+		cam_data |= addr[4] << 24 | (addr[5] << 16);
+		tc_writel(cam_data, &tr->CAM_Data);
+	}
+
+	tc_writel(saved_addr, &tr->CAM_Adr);
+}
+
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * num_addrs == -1	Promiscuous mode, receive all packets
+ * num_addrs == 0	Normal mode, clear multicast list
+ * num_addrs > 0	Multicast mode, receive normal and MC packets,
+ *			and do best-effort filtering.
+ */
+static void
+tc35815_set_multicast_list(struct net_device *dev)
+{
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+
+	if (dev->flags & IFF_PROMISC) {
+		/* With some (all?) 100MHalf HUB, controller will hang
+		 * if we enabled promiscuous mode before linkup... */
+		struct tc35815_local *lp = netdev_priv(dev);
+
+		if (!lp->link)
+			return;
+		/* Enable promiscuous mode */
+		tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc | CAM_StationAcc, &tr->CAM_Ctl);
+	} else if ((dev->flags & IFF_ALLMULTI) ||
+		  netdev_mc_count(dev) > CAM_ENTRY_MAX - 3) {
+		/* CAM 0, 1, 20 are reserved. */
+		/* Disable promiscuous mode, use normal mode. */
+		tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc, &tr->CAM_Ctl);
+	} else if (!netdev_mc_empty(dev)) {
+		struct netdev_hw_addr *ha;
+		int i;
+		int ena_bits = CAM_Ena_Bit(CAM_ENTRY_SOURCE);
+
+		tc_writel(0, &tr->CAM_Ctl);
+		/* Walk the address list, and load the filter */
+		i = 0;
+		netdev_for_each_mc_addr(ha, dev) {
+			/* entry 0,1 is reserved. */
+			tc35815_set_cam_entry(dev, i + 2, ha->addr);
+			ena_bits |= CAM_Ena_Bit(i + 2);
+			i++;
+		}
+		tc_writel(ena_bits, &tr->CAM_Ena);
+		tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl);
+	} else {
+		tc_writel(CAM_Ena_Bit(CAM_ENTRY_SOURCE), &tr->CAM_Ena);
+		tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl);
+	}
+}
+
+static void tc35815_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+
+	strlcpy(info->driver, MODNAME, sizeof(info->driver));
+	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+	strlcpy(info->bus_info, pci_name(lp->pci_dev), sizeof(info->bus_info));
+}
+
+static u32 tc35815_get_msglevel(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	return lp->msg_enable;
+}
+
+static void tc35815_set_msglevel(struct net_device *dev, u32 datum)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	lp->msg_enable = datum;
+}
+
+static int tc35815_get_sset_count(struct net_device *dev, int sset)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+
+	switch (sset) {
+	case ETH_SS_STATS:
+		return sizeof(lp->lstats) / sizeof(int);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void tc35815_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	data[0] = lp->lstats.max_tx_qlen;
+	data[1] = lp->lstats.tx_ints;
+	data[2] = lp->lstats.rx_ints;
+	data[3] = lp->lstats.tx_underrun;
+}
+
+static struct {
+	const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+	{ "max_tx_qlen" },
+	{ "tx_ints" },
+	{ "rx_ints" },
+	{ "tx_underrun" },
+};
+
+static void tc35815_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+	memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+static const struct ethtool_ops tc35815_ethtool_ops = {
+	.get_drvinfo		= tc35815_get_drvinfo,
+	.get_link		= ethtool_op_get_link,
+	.get_msglevel		= tc35815_get_msglevel,
+	.set_msglevel		= tc35815_set_msglevel,
+	.get_strings		= tc35815_get_strings,
+	.get_sset_count		= tc35815_get_sset_count,
+	.get_ethtool_stats	= tc35815_get_ethtool_stats,
+	.get_link_ksettings = phy_ethtool_get_link_ksettings,
+	.set_link_ksettings = phy_ethtool_set_link_ksettings,
+};
+
+static int tc35815_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	if (!netif_running(dev))
+		return -EINVAL;
+	if (!dev->phydev)
+		return -ENODEV;
+	return phy_mii_ioctl(dev->phydev, rq, cmd);
+}
+
+static void tc35815_chip_reset(struct net_device *dev)
+{
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+	int i;
+	/* reset the controller */
+	tc_writel(MAC_Reset, &tr->MAC_Ctl);
+	udelay(4); /* 3200ns */
+	i = 0;
+	while (tc_readl(&tr->MAC_Ctl) & MAC_Reset) {
+		if (i++ > 100) {
+			printk(KERN_ERR "%s: MAC reset failed.\n", dev->name);
+			break;
+		}
+		mdelay(1);
+	}
+	tc_writel(0, &tr->MAC_Ctl);
+
+	/* initialize registers to default value */
+	tc_writel(0, &tr->DMA_Ctl);
+	tc_writel(0, &tr->TxThrsh);
+	tc_writel(0, &tr->TxPollCtr);
+	tc_writel(0, &tr->RxFragSize);
+	tc_writel(0, &tr->Int_En);
+	tc_writel(0, &tr->FDA_Bas);
+	tc_writel(0, &tr->FDA_Lim);
+	tc_writel(0xffffffff, &tr->Int_Src);	/* Write 1 to clear */
+	tc_writel(0, &tr->CAM_Ctl);
+	tc_writel(0, &tr->Tx_Ctl);
+	tc_writel(0, &tr->Rx_Ctl);
+	tc_writel(0, &tr->CAM_Ena);
+	(void)tc_readl(&tr->Miss_Cnt);	/* Read to clear */
+
+	/* initialize internal SRAM */
+	tc_writel(DMA_TestMode, &tr->DMA_Ctl);
+	for (i = 0; i < 0x1000; i += 4) {
+		tc_writel(i, &tr->CAM_Adr);
+		tc_writel(0, &tr->CAM_Data);
+	}
+	tc_writel(0, &tr->DMA_Ctl);
+}
+
+static void tc35815_chip_init(struct net_device *dev)
+{
+	struct tc35815_local *lp = netdev_priv(dev);
+	struct tc35815_regs __iomem *tr =
+		(struct tc35815_regs __iomem *)dev->base_addr;
+	unsigned long txctl = TX_CTL_CMD;
+
+	/* load station address to CAM */
+	tc35815_set_cam_entry(dev, CAM_ENTRY_SOURCE, dev->dev_addr);
+
+	/* Enable CAM (broadcast and unicast) */
+	tc_writel(CAM_Ena_Bit(CAM_ENTRY_SOURCE), &tr->CAM_Ena);
+	tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl);
+
+	/* Use DMA_RxAlign_2 to make IP header 4-byte aligned. */
+	if (HAVE_DMA_RXALIGN(lp))
+		tc_writel(DMA_BURST_SIZE | DMA_RxAlign_2, &tr->DMA_Ctl);
+	else
+		tc_writel(DMA_BURST_SIZE, &tr->DMA_Ctl);
+	tc_writel(0, &tr->TxPollCtr);	/* Batch mode */
+	tc_writel(TX_THRESHOLD, &tr->TxThrsh);
+	tc_writel(INT_EN_CMD, &tr->Int_En);
+
+	/* set queues */
+	tc_writel(fd_virt_to_bus(lp, lp->rfd_base), &tr->FDA_Bas);
+	tc_writel((unsigned long)lp->rfd_limit - (unsigned long)lp->rfd_base,
+		  &tr->FDA_Lim);
+	/*
+	 * Activation method:
+	 * First, enable the MAC Transmitter and the DMA Receive circuits.
+	 * Then enable the DMA Transmitter and the MAC Receive circuits.
+	 */
+	tc_writel(fd_virt_to_bus(lp, lp->fbl_ptr), &tr->BLFrmPtr);	/* start DMA receiver */
+	tc_writel(RX_CTL_CMD, &tr->Rx_Ctl);	/* start MAC receiver */
+
+	/* start MAC transmitter */
+	/* TX4939 does not have EnLCarr */
+	if (lp->chiptype == TC35815_TX4939)
+		txctl &= ~Tx_EnLCarr;
+	/* WORKAROUND: ignore LostCrS in full duplex operation */
+	if (!dev->phydev || !lp->link || lp->duplex == DUPLEX_FULL)
+		txctl &= ~Tx_EnLCarr;
+	tc_writel(txctl, &tr->Tx_Ctl);
+}
+
+#ifdef CONFIG_PM
+static int tc35815_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct tc35815_local *lp = netdev_priv(dev);
+	unsigned long flags;
+
+	pci_save_state(pdev);
+	if (!netif_running(dev))
+		return 0;
+	netif_device_detach(dev);
+	if (dev->phydev)
+		phy_stop(dev->phydev);
+	spin_lock_irqsave(&lp->lock, flags);
+	tc35815_chip_reset(dev);
+	spin_unlock_irqrestore(&lp->lock, flags);
+	pci_set_power_state(pdev, PCI_D3hot);
+	return 0;
+}
+
+static int tc35815_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	pci_restore_state(pdev);
+	if (!netif_running(dev))
+		return 0;
+	pci_set_power_state(pdev, PCI_D0);
+	tc35815_restart(dev);
+	netif_carrier_off(dev);
+	if (dev->phydev)
+		phy_start(dev->phydev);
+	netif_device_attach(dev);
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static struct pci_driver tc35815_pci_driver = {
+	.name		= MODNAME,
+	.id_table	= tc35815_pci_tbl,
+	.probe		= tc35815_init_one,
+	.remove		= tc35815_remove_one,
+#ifdef CONFIG_PM
+	.suspend	= tc35815_suspend,
+	.resume		= tc35815_resume,
+#endif
+};
+
+module_param_named(speed, options.speed, int, 0);
+MODULE_PARM_DESC(speed, "0:auto, 10:10Mbps, 100:100Mbps");
+module_param_named(duplex, options.duplex, int, 0);
+MODULE_PARM_DESC(duplex, "0:auto, 1:half, 2:full");
+
+module_pci_driver(tc35815_pci_driver);
+MODULE_DESCRIPTION("TOSHIBA TC35815 PCI 10M/100M Ethernet driver");
+MODULE_LICENSE("GPL");