Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 790 insertions, 0 deletions

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
new file mode 100644
index 000000000..94622d119
--- /dev/null
+++ b/drivers/net/phy/broadcom.c
@@ -0,0 +1,790 @@
+/*
+ *	drivers/net/phy/broadcom.c
+ *
+ *	Broadcom BCM5411, BCM5421 and BCM5461 Gigabit Ethernet
+ *	transceivers.
+ *
+ *	Copyright (c) 2006  Maciej W. Rozycki
+ *
+ *	Inspired by code written by Amy Fong.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#include "bcm-phy-lib.h"
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/brcmphy.h>
+#include <linux/of.h>
+
+#define BRCM_PHY_MODEL(phydev) \
+	((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
+
+#define BRCM_PHY_REV(phydev) \
+	((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
+
+MODULE_DESCRIPTION("Broadcom PHY driver");
+MODULE_AUTHOR("Maciej W. Rozycki");
+MODULE_LICENSE("GPL");
+
+static int bcm54210e_config_init(struct phy_device *phydev)
+{
+	int val;
+
+	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+	val |= MII_BCM54XX_AUXCTL_MISC_WREN;
+	bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, val);
+
+	val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
+	val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+	bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
+
+	if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
+		val = phy_read(phydev, MII_CTRL1000);
+		val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
+		phy_write(phydev, MII_CTRL1000, val);
+	}
+
+	return 0;
+}
+
+static int bcm54612e_config_init(struct phy_device *phydev)
+{
+	int reg;
+
+	/* Clear TX internal delay unless requested. */
+	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
+	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
+		/* Disable TXD to GTXCLK clock delay (default set) */
+		/* Bit 9 is the only field in shadow register 00011 */
+		bcm_phy_write_shadow(phydev, 0x03, 0);
+	}
+
+	/* Clear RX internal delay unless requested. */
+	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
+	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
+		reg = bcm54xx_auxctl_read(phydev,
+					  MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+		/* Disable RXD to RXC delay (default set) */
+		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+		/* Clear shadow selector field */
+		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
+		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+				     MII_BCM54XX_AUXCTL_MISC_WREN | reg);
+	}
+
+	/* Enable CLK125 MUX on LED4 if ref clock is enabled. */
+	if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
+		int err;
+
+		reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
+		err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
+					BCM54612E_LED4_CLK125OUT_EN | reg);
+
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int bcm5481x_config(struct phy_device *phydev)
+{
+	int rc, val;
+
+	/* handling PHY's internal RX clock delay */
+	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	val |= MII_BCM54XX_AUXCTL_MISC_WREN;
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+		/* Disable RGMII RXC-RXD skew */
+		val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+	}
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+		/* Enable RGMII RXC-RXD skew */
+		val |= MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+	}
+	rc = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+				  val);
+	if (rc < 0)
+		return rc;
+
+	/* handling PHY's internal TX clock delay */
+	val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+		/* Disable internal TX clock delay */
+		val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+	}
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+		/* Enable internal TX clock delay */
+		val |= BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+	}
+	rc = bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+/* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
+static int bcm50610_a0_workaround(struct phy_device *phydev)
+{
+	int err;
+
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH0,
+				MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN |
+				MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF);
+	if (err < 0)
+		return err;
+
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH3,
+				MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ);
+	if (err < 0)
+		return err;
+
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75,
+				MII_BCM54XX_EXP_EXP75_VDACCTRL);
+	if (err < 0)
+		return err;
+
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP96,
+				MII_BCM54XX_EXP_EXP96_MYST);
+	if (err < 0)
+		return err;
+
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP97,
+				MII_BCM54XX_EXP_EXP97_MYST);
+
+	return err;
+}
+
+static int bcm54xx_phydsp_config(struct phy_device *phydev)
+{
+	int err, err2;
+
+	/* Enable the SMDSP clock */
+	err = bcm54xx_auxctl_write(phydev,
+				   MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+				   MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA |
+				   MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
+	if (err < 0)
+		return err;
+
+	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	    BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) {
+		/* Clear bit 9 to fix a phy interop issue. */
+		err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP08,
+					MII_BCM54XX_EXP_EXP08_RJCT_2MHZ);
+		if (err < 0)
+			goto error;
+
+		if (phydev->drv->phy_id == PHY_ID_BCM50610) {
+			err = bcm50610_a0_workaround(phydev);
+			if (err < 0)
+				goto error;
+		}
+	}
+
+	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) {
+		int val;
+
+		val = bcm_phy_read_exp(phydev, MII_BCM54XX_EXP_EXP75);
+		if (val < 0)
+			goto error;
+
+		val |= MII_BCM54XX_EXP_EXP75_CM_OSC;
+		err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75, val);
+	}
+
+error:
+	/* Disable the SMDSP clock */
+	err2 = bcm54xx_auxctl_write(phydev,
+				    MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+				    MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
+
+	/* Return the first error reported. */
+	return err ? err : err2;
+}
+
+static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
+{
+	u32 orig;
+	int val;
+	bool clk125en = true;
+
+	/* Abort if we are using an untested phy. */
+	if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
+		return;
+
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
+	if (val < 0)
+		return;
+
+	orig = val;
+
+	if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	     BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+	    BRCM_PHY_REV(phydev) >= 0x3) {
+		/*
+		 * Here, bit 0 _disables_ CLK125 when set.
+		 * This bit is set by default.
+		 */
+		clk125en = false;
+	} else {
+		if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) {
+			/* Here, bit 0 _enables_ CLK125 when set */
+			val &= ~BCM54XX_SHD_SCR3_DEF_CLK125;
+			clk125en = false;
+		}
+	}
+
+	if (!clk125en || (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		val &= ~BCM54XX_SHD_SCR3_DLLAPD_DIS;
+	else
+		val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+
+	if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY)
+		val |= BCM54XX_SHD_SCR3_TRDDAPD;
+
+	if (orig != val)
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
+
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD);
+	if (val < 0)
+		return;
+
+	orig = val;
+
+	if (!clk125en || (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		val |= BCM54XX_SHD_APD_EN;
+	else
+		val &= ~BCM54XX_SHD_APD_EN;
+
+	if (orig != val)
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val);
+}
+
+static int bcm54xx_config_init(struct phy_device *phydev)
+{
+	int reg, err, val;
+
+	reg = phy_read(phydev, MII_BCM54XX_ECR);
+	if (reg < 0)
+		return reg;
+
+	/* Mask interrupts globally.  */
+	reg |= MII_BCM54XX_ECR_IM;
+	err = phy_write(phydev, MII_BCM54XX_ECR, reg);
+	if (err < 0)
+		return err;
+
+	/* Unmask events we are interested in.  */
+	reg = ~(MII_BCM54XX_INT_DUPLEX |
+		MII_BCM54XX_INT_SPEED |
+		MII_BCM54XX_INT_LINK);
+	err = phy_write(phydev, MII_BCM54XX_IMR, reg);
+	if (err < 0)
+		return err;
+
+	if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	     BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+	    (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_RGMII_MODE, 0);
+
+	if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) ||
+	    (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) ||
+	    (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		bcm54xx_adjust_rxrefclk(phydev);
+
+	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E) {
+		err = bcm54210e_config_init(phydev);
+		if (err)
+			return err;
+	} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) {
+		err = bcm54612e_config_init(phydev);
+		if (err)
+			return err;
+	} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
+		/* For BCM54810, we need to disable BroadR-Reach function */
+		val = bcm_phy_read_exp(phydev,
+				       BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
+		val &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
+		err = bcm_phy_write_exp(phydev,
+					BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
+					val);
+		if (err < 0)
+			return err;
+	}
+
+	bcm54xx_phydsp_config(phydev);
+
+	return 0;
+}
+
+static int bcm5482_config_init(struct phy_device *phydev)
+{
+	int err, reg;
+
+	err = bcm54xx_config_init(phydev);
+
+	if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) {
+		/*
+		 * Enable secondary SerDes and its use as an LED source
+		 */
+		reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_SSD);
+		bcm_phy_write_shadow(phydev, BCM5482_SHD_SSD,
+				     reg |
+				     BCM5482_SHD_SSD_LEDM |
+				     BCM5482_SHD_SSD_EN);
+
+		/*
+		 * Enable SGMII slave mode and auto-detection
+		 */
+		reg = BCM5482_SSD_SGMII_SLAVE | MII_BCM54XX_EXP_SEL_SSD;
+		err = bcm_phy_read_exp(phydev, reg);
+		if (err < 0)
+			return err;
+		err = bcm_phy_write_exp(phydev, reg, err |
+					BCM5482_SSD_SGMII_SLAVE_EN |
+					BCM5482_SSD_SGMII_SLAVE_AD);
+		if (err < 0)
+			return err;
+
+		/*
+		 * Disable secondary SerDes powerdown
+		 */
+		reg = BCM5482_SSD_1000BX_CTL | MII_BCM54XX_EXP_SEL_SSD;
+		err = bcm_phy_read_exp(phydev, reg);
+		if (err < 0)
+			return err;
+		err = bcm_phy_write_exp(phydev, reg,
+					err & ~BCM5482_SSD_1000BX_CTL_PWRDOWN);
+		if (err < 0)
+			return err;
+
+		/*
+		 * Select 1000BASE-X register set (primary SerDes)
+		 */
+		reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_MODE);
+		bcm_phy_write_shadow(phydev, BCM5482_SHD_MODE,
+				     reg | BCM5482_SHD_MODE_1000BX);
+
+		/*
+		 * LED1=ACTIVITYLED, LED3=LINKSPD[2]
+		 * (Use LED1 as secondary SerDes ACTIVITY LED)
+		 */
+		bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1,
+			BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) |
+			BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD2));
+
+		/*
+		 * Auto-negotiation doesn't seem to work quite right
+		 * in this mode, so we disable it and force it to the
+		 * right speed/duplex setting.  Only 'link status'
+		 * is important.
+		 */
+		phydev->autoneg = AUTONEG_DISABLE;
+		phydev->speed = SPEED_1000;
+		phydev->duplex = DUPLEX_FULL;
+	}
+
+	return err;
+}
+
+static int bcm5482_read_status(struct phy_device *phydev)
+{
+	int err;
+
+	err = genphy_read_status(phydev);
+
+	if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) {
+		/*
+		 * Only link status matters for 1000Base-X mode, so force
+		 * 1000 Mbit/s full-duplex status
+		 */
+		if (phydev->link) {
+			phydev->speed = SPEED_1000;
+			phydev->duplex = DUPLEX_FULL;
+		}
+	}
+
+	return err;
+}
+
+static int bcm5481_config_aneg(struct phy_device *phydev)
+{
+	struct device_node *np = phydev->mdio.dev.of_node;
+	int ret;
+
+	/* Aneg firsly. */
+	ret = genphy_config_aneg(phydev);
+
+	/* Then we can set up the delay. */
+	bcm5481x_config(phydev);
+
+	if (of_property_read_bool(np, "enet-phy-lane-swap")) {
+		/* Lane Swap - Undocumented register...magic! */
+		ret = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_SEL_ER + 0x9,
+					0x11B);
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret;
+}
+
+static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
+{
+	int val;
+
+	val = phy_read(phydev, reg);
+	if (val < 0)
+		return val;
+
+	return phy_write(phydev, reg, val | set);
+}
+
+static int brcm_fet_config_init(struct phy_device *phydev)
+{
+	int reg, err, err2, brcmtest;
+
+	/* Reset the PHY to bring it to a known state. */
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+	if (err < 0)
+		return err;
+
+	/* The datasheet indicates the PHY needs up to 1us to complete a reset,
+	 * build some slack here.
+	 */
+	usleep_range(1000, 2000);
+
+	/* The PHY requires 65 MDC clock cycles to complete a write operation
+	 * and turnaround the line properly.
+	 *
+	 * We ignore -EIO here as the MDIO controller (e.g.: mdio-bcm-unimac)
+	 * may flag the lack of turn-around as a read failure. This is
+	 * particularly true with this combination since the MDIO controller
+	 * only used 64 MDC cycles. This is not a critical failure in this
+	 * specific case and it has no functional impact otherwise, so we let
+	 * that one go through. If there is a genuine bus error, the next read
+	 * of MII_BRCM_FET_INTREG will error out.
+	 */
+	err = phy_read(phydev, MII_BMCR);
+	if (err < 0 && err != -EIO)
+		return err;
+
+	reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+	if (reg < 0)
+		return reg;
+
+	/* Unmask events we are interested in and mask interrupts globally. */
+	reg = MII_BRCM_FET_IR_DUPLEX_EN |
+	      MII_BRCM_FET_IR_SPEED_EN |
+	      MII_BRCM_FET_IR_LINK_EN |
+	      MII_BRCM_FET_IR_ENABLE |
+	      MII_BRCM_FET_IR_MASK;
+
+	err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
+	if (err < 0)
+		return err;
+
+	/* Enable shadow register access */
+	brcmtest = phy_read(phydev, MII_BRCM_FET_BRCMTEST);
+	if (brcmtest < 0)
+		return brcmtest;
+
+	reg = brcmtest | MII_BRCM_FET_BT_SRE;
+
+	err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
+	if (err < 0)
+		return err;
+
+	/* Set the LED mode */
+	reg = phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4);
+	if (reg < 0) {
+		err = reg;
+		goto done;
+	}
+
+	reg &= ~MII_BRCM_FET_SHDW_AM4_LED_MASK;
+	reg |= MII_BRCM_FET_SHDW_AM4_LED_MODE1;
+
+	err = phy_write(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
+	if (err < 0)
+		goto done;
+
+	/* Enable auto MDIX */
+	err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_MISCCTRL,
+				       MII_BRCM_FET_SHDW_MC_FAME);
+	if (err < 0)
+		goto done;
+
+	if (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE) {
+		/* Enable auto power down */
+		err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
+					       MII_BRCM_FET_SHDW_AS2_APDE);
+	}
+
+done:
+	/* Disable shadow register access */
+	err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
+	if (!err)
+		err = err2;
+
+	return err;
+}
+
+static int brcm_fet_ack_interrupt(struct phy_device *phydev)
+{
+	int reg;
+
+	/* Clear pending interrupts.  */
+	reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+	if (reg < 0)
+		return reg;
+
+	return 0;
+}
+
+static int brcm_fet_config_intr(struct phy_device *phydev)
+{
+	int reg, err;
+
+	reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+	if (reg < 0)
+		return reg;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		reg &= ~MII_BRCM_FET_IR_MASK;
+	else
+		reg |= MII_BRCM_FET_IR_MASK;
+
+	err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
+	return err;
+}
+
+struct bcm53xx_phy_priv {
+	u64	*stats;
+};
+
+static int bcm53xx_phy_probe(struct phy_device *phydev)
+{
+	struct bcm53xx_phy_priv *priv;
+
+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	priv->stats = devm_kcalloc(&phydev->mdio.dev,
+				   bcm_phy_get_sset_count(phydev), sizeof(u64),
+				   GFP_KERNEL);
+	if (!priv->stats)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void bcm53xx_phy_get_stats(struct phy_device *phydev,
+				  struct ethtool_stats *stats, u64 *data)
+{
+	struct bcm53xx_phy_priv *priv = phydev->priv;
+
+	bcm_phy_get_stats(phydev, priv->stats, stats, data);
+}
+
+static struct phy_driver broadcom_drivers[] = {
+{
+	.phy_id		= PHY_ID_BCM5411,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5411",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM5421,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5421",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM54210E,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM54210E",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM5461,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5461",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM54612E,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM54612E",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM54616S,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM54616S",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM5464,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5464",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM5481,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5481",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.config_aneg	= bcm5481_config_aneg,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id         = PHY_ID_BCM54810,
+	.phy_id_mask    = 0xfffffff0,
+	.name           = "Broadcom BCM54810",
+	.features       = PHY_GBIT_FEATURES,
+	.flags          = PHY_HAS_INTERRUPT,
+	.config_init    = bcm54xx_config_init,
+	.config_aneg    = bcm5481_config_aneg,
+	.ack_interrupt  = bcm_phy_ack_intr,
+	.config_intr    = bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM5482,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5482",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm5482_config_init,
+	.read_status	= bcm5482_read_status,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM50610,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM50610",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM50610M,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM50610M",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM57780,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM57780",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCMAC131,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCMAC131",
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= brcm_fet_config_init,
+	.ack_interrupt	= brcm_fet_ack_interrupt,
+	.config_intr	= brcm_fet_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM5241,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5241",
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= brcm_fet_config_init,
+	.ack_interrupt	= brcm_fet_ack_interrupt,
+	.config_intr	= brcm_fet_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM5395,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5395",
+	.flags		= PHY_IS_INTERNAL,
+	.features	= PHY_GBIT_FEATURES,
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm53xx_phy_get_stats,
+	.probe		= bcm53xx_phy_probe,
+}, {
+	.phy_id         = PHY_ID_BCM89610,
+	.phy_id_mask    = 0xfffffff0,
+	.name           = "Broadcom BCM89610",
+	.features       = PHY_GBIT_FEATURES,
+	.flags          = PHY_HAS_INTERRUPT,
+	.config_init    = bcm54xx_config_init,
+	.ack_interrupt  = bcm_phy_ack_intr,
+	.config_intr    = bcm_phy_config_intr,
+} };
+
+module_phy_driver(broadcom_drivers);
+
+static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
+	{ PHY_ID_BCM5411, 0xfffffff0 },
+	{ PHY_ID_BCM5421, 0xfffffff0 },
+	{ PHY_ID_BCM54210E, 0xfffffff0 },
+	{ PHY_ID_BCM5461, 0xfffffff0 },
+	{ PHY_ID_BCM54612E, 0xfffffff0 },
+	{ PHY_ID_BCM54616S, 0xfffffff0 },
+	{ PHY_ID_BCM5464, 0xfffffff0 },
+	{ PHY_ID_BCM5481, 0xfffffff0 },
+	{ PHY_ID_BCM54810, 0xfffffff0 },
+	{ PHY_ID_BCM5482, 0xfffffff0 },
+	{ PHY_ID_BCM50610, 0xfffffff0 },
+	{ PHY_ID_BCM50610M, 0xfffffff0 },
+	{ PHY_ID_BCM57780, 0xfffffff0 },
+	{ PHY_ID_BCMAC131, 0xfffffff0 },
+	{ PHY_ID_BCM5241, 0xfffffff0 },
+	{ PHY_ID_BCM5395, 0xfffffff0 },
+	{ PHY_ID_BCM89610, 0xfffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, broadcom_tbl);