Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1059 insertions, 0 deletions

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
new file mode 100644
index 000000000..1d00a5638
--- /dev/null
+++ b/drivers/net/phy/micrel.c
@@ -0,0 +1,1059 @@
+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010-2013 Micrel, Inc.
+ * Copyright (c) 2014 Johan Hovold <johan@kernel.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Support : Micrel Phys:
+ *		Giga phys: ksz9021, ksz9031
+ *		100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
+ *			   ksz8021, ksz8031, ksz8051,
+ *			   ksz8081, ksz8091,
+ *			   ksz8061,
+ *		Switch : ksz8873, ksz886x
+ *			 ksz9477
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+
+/* Operation Mode Strap Override */
+#define MII_KSZPHY_OMSO				0x16
+#define KSZPHY_OMSO_B_CAST_OFF			BIT(9)
+#define KSZPHY_OMSO_NAND_TREE_ON		BIT(5)
+#define KSZPHY_OMSO_RMII_OVERRIDE		BIT(1)
+#define KSZPHY_OMSO_MII_OVERRIDE		BIT(0)
+
+/* general Interrupt control/status reg in vendor specific block. */
+#define MII_KSZPHY_INTCS			0x1B
+#define	KSZPHY_INTCS_JABBER			BIT(15)
+#define	KSZPHY_INTCS_RECEIVE_ERR		BIT(14)
+#define	KSZPHY_INTCS_PAGE_RECEIVE		BIT(13)
+#define	KSZPHY_INTCS_PARELLEL			BIT(12)
+#define	KSZPHY_INTCS_LINK_PARTNER_ACK		BIT(11)
+#define	KSZPHY_INTCS_LINK_DOWN			BIT(10)
+#define	KSZPHY_INTCS_REMOTE_FAULT		BIT(9)
+#define	KSZPHY_INTCS_LINK_UP			BIT(8)
+#define	KSZPHY_INTCS_ALL			(KSZPHY_INTCS_LINK_UP |\
+						KSZPHY_INTCS_LINK_DOWN)
+
+/* PHY Control 1 */
+#define	MII_KSZPHY_CTRL_1			0x1e
+
+/* PHY Control 2 / PHY Control (if no PHY Control 1) */
+#define	MII_KSZPHY_CTRL_2			0x1f
+#define	MII_KSZPHY_CTRL				MII_KSZPHY_CTRL_2
+/* bitmap of PHY register to set interrupt mode */
+#define KSZPHY_CTRL_INT_ACTIVE_HIGH		BIT(9)
+#define KSZPHY_RMII_REF_CLK_SEL			BIT(7)
+
+/* Write/read to/from extended registers */
+#define MII_KSZPHY_EXTREG                       0x0b
+#define KSZPHY_EXTREG_WRITE                     0x8000
+
+#define MII_KSZPHY_EXTREG_WRITE                 0x0c
+#define MII_KSZPHY_EXTREG_READ                  0x0d
+
+/* Extended registers */
+#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW         0x104
+#define MII_KSZPHY_RX_DATA_PAD_SKEW             0x105
+#define MII_KSZPHY_TX_DATA_PAD_SKEW             0x106
+
+#define PS_TO_REG				200
+
+struct kszphy_hw_stat {
+	const char *string;
+	u8 reg;
+	u8 bits;
+};
+
+static struct kszphy_hw_stat kszphy_hw_stats[] = {
+	{ "phy_receive_errors", 21, 16},
+	{ "phy_idle_errors", 10, 8 },
+};
+
+struct kszphy_type {
+	u32 led_mode_reg;
+	u16 interrupt_level_mask;
+	bool has_broadcast_disable;
+	bool has_nand_tree_disable;
+	bool has_rmii_ref_clk_sel;
+};
+
+struct kszphy_priv {
+	const struct kszphy_type *type;
+	int led_mode;
+	bool rmii_ref_clk_sel;
+	bool rmii_ref_clk_sel_val;
+	u64 stats[ARRAY_SIZE(kszphy_hw_stats)];
+};
+
+static const struct kszphy_type ksz8021_type = {
+	.led_mode_reg		= MII_KSZPHY_CTRL_2,
+	.has_broadcast_disable	= true,
+	.has_nand_tree_disable	= true,
+	.has_rmii_ref_clk_sel	= true,
+};
+
+static const struct kszphy_type ksz8041_type = {
+	.led_mode_reg		= MII_KSZPHY_CTRL_1,
+};
+
+static const struct kszphy_type ksz8051_type = {
+	.led_mode_reg		= MII_KSZPHY_CTRL_2,
+	.has_nand_tree_disable	= true,
+};
+
+static const struct kszphy_type ksz8081_type = {
+	.led_mode_reg		= MII_KSZPHY_CTRL_2,
+	.has_broadcast_disable	= true,
+	.has_nand_tree_disable	= true,
+	.has_rmii_ref_clk_sel	= true,
+};
+
+static const struct kszphy_type ks8737_type = {
+	.interrupt_level_mask	= BIT(14),
+};
+
+static const struct kszphy_type ksz9021_type = {
+	.interrupt_level_mask	= BIT(14),
+};
+
+static int kszphy_extended_write(struct phy_device *phydev,
+				u32 regnum, u16 val)
+{
+	phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum);
+	return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val);
+}
+
+static int kszphy_extended_read(struct phy_device *phydev,
+				u32 regnum)
+{
+	phy_write(phydev, MII_KSZPHY_EXTREG, regnum);
+	return phy_read(phydev, MII_KSZPHY_EXTREG_READ);
+}
+
+static int kszphy_ack_interrupt(struct phy_device *phydev)
+{
+	/* bit[7..0] int status, which is a read and clear register. */
+	int rc;
+
+	rc = phy_read(phydev, MII_KSZPHY_INTCS);
+
+	return (rc < 0) ? rc : 0;
+}
+
+static int kszphy_config_intr(struct phy_device *phydev)
+{
+	const struct kszphy_type *type = phydev->drv->driver_data;
+	int temp;
+	u16 mask;
+
+	if (type && type->interrupt_level_mask)
+		mask = type->interrupt_level_mask;
+	else
+		mask = KSZPHY_CTRL_INT_ACTIVE_HIGH;
+
+	/* set the interrupt pin active low */
+	temp = phy_read(phydev, MII_KSZPHY_CTRL);
+	if (temp < 0)
+		return temp;
+	temp &= ~mask;
+	phy_write(phydev, MII_KSZPHY_CTRL, temp);
+
+	/* enable / disable interrupts */
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		temp = KSZPHY_INTCS_ALL;
+	else
+		temp = 0;
+
+	return phy_write(phydev, MII_KSZPHY_INTCS, temp);
+}
+
+static int kszphy_rmii_clk_sel(struct phy_device *phydev, bool val)
+{
+	int ctrl;
+
+	ctrl = phy_read(phydev, MII_KSZPHY_CTRL);
+	if (ctrl < 0)
+		return ctrl;
+
+	if (val)
+		ctrl |= KSZPHY_RMII_REF_CLK_SEL;
+	else
+		ctrl &= ~KSZPHY_RMII_REF_CLK_SEL;
+
+	return phy_write(phydev, MII_KSZPHY_CTRL, ctrl);
+}
+
+static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val)
+{
+	int rc, temp, shift;
+
+	switch (reg) {
+	case MII_KSZPHY_CTRL_1:
+		shift = 14;
+		break;
+	case MII_KSZPHY_CTRL_2:
+		shift = 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	temp = phy_read(phydev, reg);
+	if (temp < 0) {
+		rc = temp;
+		goto out;
+	}
+
+	temp &= ~(3 << shift);
+	temp |= val << shift;
+	rc = phy_write(phydev, reg, temp);
+out:
+	if (rc < 0)
+		phydev_err(phydev, "failed to set led mode\n");
+
+	return rc;
+}
+
+/* Disable PHY address 0 as the broadcast address, so that it can be used as a
+ * unique (non-broadcast) address on a shared bus.
+ */
+static int kszphy_broadcast_disable(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, MII_KSZPHY_OMSO);
+	if (ret < 0)
+		goto out;
+
+	ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF);
+out:
+	if (ret)
+		phydev_err(phydev, "failed to disable broadcast address\n");
+
+	return ret;
+}
+
+static int kszphy_nand_tree_disable(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, MII_KSZPHY_OMSO);
+	if (ret < 0)
+		goto out;
+
+	if (!(ret & KSZPHY_OMSO_NAND_TREE_ON))
+		return 0;
+
+	ret = phy_write(phydev, MII_KSZPHY_OMSO,
+			ret & ~KSZPHY_OMSO_NAND_TREE_ON);
+out:
+	if (ret)
+		phydev_err(phydev, "failed to disable NAND tree mode\n");
+
+	return ret;
+}
+
+/* Some config bits need to be set again on resume, handle them here. */
+static int kszphy_config_reset(struct phy_device *phydev)
+{
+	struct kszphy_priv *priv = phydev->priv;
+	int ret;
+
+	if (priv->rmii_ref_clk_sel) {
+		ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
+		if (ret) {
+			phydev_err(phydev,
+				   "failed to set rmii reference clock\n");
+			return ret;
+		}
+	}
+
+	if (priv->type && priv->led_mode >= 0)
+		kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);
+
+	return 0;
+}
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+	struct kszphy_priv *priv = phydev->priv;
+	const struct kszphy_type *type;
+
+	if (!priv)
+		return 0;
+
+	type = priv->type;
+
+	if (type && type->has_broadcast_disable)
+		kszphy_broadcast_disable(phydev);
+
+	if (type && type->has_nand_tree_disable)
+		kszphy_nand_tree_disable(phydev);
+
+	return kszphy_config_reset(phydev);
+}
+
+static int ksz8041_config_init(struct phy_device *phydev)
+{
+	struct device_node *of_node = phydev->mdio.dev.of_node;
+
+	/* Limit supported and advertised modes in fiber mode */
+	if (of_property_read_bool(of_node, "micrel,fiber-mode")) {
+		phydev->dev_flags |= MICREL_PHY_FXEN;
+		phydev->supported &= SUPPORTED_100baseT_Full |
+				     SUPPORTED_100baseT_Half;
+		phydev->supported |= SUPPORTED_FIBRE;
+		phydev->advertising &= ADVERTISED_100baseT_Full |
+				       ADVERTISED_100baseT_Half;
+		phydev->advertising |= ADVERTISED_FIBRE;
+		phydev->autoneg = AUTONEG_DISABLE;
+	}
+
+	return kszphy_config_init(phydev);
+}
+
+static int ksz8041_config_aneg(struct phy_device *phydev)
+{
+	/* Skip auto-negotiation in fiber mode */
+	if (phydev->dev_flags & MICREL_PHY_FXEN) {
+		phydev->speed = SPEED_100;
+		return 0;
+	}
+
+	return genphy_config_aneg(phydev);
+}
+
+static int ksz8061_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A);
+	if (ret)
+		return ret;
+
+	return kszphy_config_init(phydev);
+}
+
+static int ksz9021_load_values_from_of(struct phy_device *phydev,
+				       const struct device_node *of_node,
+				       u16 reg,
+				       const char *field1, const char *field2,
+				       const char *field3, const char *field4)
+{
+	int val1 = -1;
+	int val2 = -2;
+	int val3 = -3;
+	int val4 = -4;
+	int newval;
+	int matches = 0;
+
+	if (!of_property_read_u32(of_node, field1, &val1))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field2, &val2))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field3, &val3))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field4, &val4))
+		matches++;
+
+	if (!matches)
+		return 0;
+
+	if (matches < 4)
+		newval = kszphy_extended_read(phydev, reg);
+	else
+		newval = 0;
+
+	if (val1 != -1)
+		newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0);
+
+	if (val2 != -2)
+		newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4);
+
+	if (val3 != -3)
+		newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8);
+
+	if (val4 != -4)
+		newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12);
+
+	return kszphy_extended_write(phydev, reg, newval);
+}
+
+static int ksz9021_config_init(struct phy_device *phydev)
+{
+	const struct device *dev = &phydev->mdio.dev;
+	const struct device_node *of_node = dev->of_node;
+	const struct device *dev_walker;
+
+	/* The Micrel driver has a deprecated option to place phy OF
+	 * properties in the MAC node. Walk up the tree of devices to
+	 * find a device with an OF node.
+	 */
+	dev_walker = &phydev->mdio.dev;
+	do {
+		of_node = dev_walker->of_node;
+		dev_walker = dev_walker->parent;
+
+	} while (!of_node && dev_walker);
+
+	if (of_node) {
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_CLK_CONTROL_PAD_SKEW,
+				    "txen-skew-ps", "txc-skew-ps",
+				    "rxdv-skew-ps", "rxc-skew-ps");
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_RX_DATA_PAD_SKEW,
+				    "rxd0-skew-ps", "rxd1-skew-ps",
+				    "rxd2-skew-ps", "rxd3-skew-ps");
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_TX_DATA_PAD_SKEW,
+				    "txd0-skew-ps", "txd1-skew-ps",
+				    "txd2-skew-ps", "txd3-skew-ps");
+	}
+	return 0;
+}
+
+#define MII_KSZ9031RN_MMD_CTRL_REG	0x0d
+#define MII_KSZ9031RN_MMD_REGDATA_REG	0x0e
+#define OP_DATA				1
+#define KSZ9031_PS_TO_REG		60
+
+/* Extended registers */
+/* MMD Address 0x0 */
+#define MII_KSZ9031RN_FLP_BURST_TX_LO	3
+#define MII_KSZ9031RN_FLP_BURST_TX_HI	4
+
+/* MMD Address 0x2 */
+#define MII_KSZ9031RN_CONTROL_PAD_SKEW	4
+#define MII_KSZ9031RN_RX_DATA_PAD_SKEW	5
+#define MII_KSZ9031RN_TX_DATA_PAD_SKEW	6
+#define MII_KSZ9031RN_CLK_PAD_SKEW	8
+
+/* MMD Address 0x1C */
+#define MII_KSZ9031RN_EDPD		0x23
+#define MII_KSZ9031RN_EDPD_ENABLE	BIT(0)
+
+static int ksz9031_extended_write(struct phy_device *phydev,
+				  u8 mode, u32 dev_addr, u32 regnum, u16 val)
+{
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+	phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+	return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
+}
+
+static int ksz9031_extended_read(struct phy_device *phydev,
+				 u8 mode, u32 dev_addr, u32 regnum)
+{
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+	phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+	return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
+}
+
+static int ksz9031_of_load_skew_values(struct phy_device *phydev,
+				       const struct device_node *of_node,
+				       u16 reg, size_t field_sz,
+				       const char *field[], u8 numfields)
+{
+	int val[4] = {-1, -2, -3, -4};
+	int matches = 0;
+	u16 mask;
+	u16 maxval;
+	u16 newval;
+	int i;
+
+	for (i = 0; i < numfields; i++)
+		if (!of_property_read_u32(of_node, field[i], val + i))
+			matches++;
+
+	if (!matches)
+		return 0;
+
+	if (matches < numfields)
+		newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
+	else
+		newval = 0;
+
+	maxval = (field_sz == 4) ? 0xf : 0x1f;
+	for (i = 0; i < numfields; i++)
+		if (val[i] != -(i + 1)) {
+			mask = 0xffff;
+			mask ^= maxval << (field_sz * i);
+			newval = (newval & mask) |
+				(((val[i] / KSZ9031_PS_TO_REG) & maxval)
+					<< (field_sz * i));
+		}
+
+	return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
+}
+
+/* Center KSZ9031RNX FLP timing at 16ms. */
+static int ksz9031_center_flp_timing(struct phy_device *phydev)
+{
+	int result;
+
+	result = ksz9031_extended_write(phydev, OP_DATA, 0,
+					MII_KSZ9031RN_FLP_BURST_TX_HI, 0x0006);
+	if (result)
+		return result;
+
+	result = ksz9031_extended_write(phydev, OP_DATA, 0,
+					MII_KSZ9031RN_FLP_BURST_TX_LO, 0x1A80);
+	if (result)
+		return result;
+
+	return genphy_restart_aneg(phydev);
+}
+
+/* Enable energy-detect power-down mode */
+static int ksz9031_enable_edpd(struct phy_device *phydev)
+{
+	int reg;
+
+	reg = ksz9031_extended_read(phydev, OP_DATA, 0x1C, MII_KSZ9031RN_EDPD);
+	if (reg < 0)
+		return reg;
+	return ksz9031_extended_write(phydev, OP_DATA, 0x1C, MII_KSZ9031RN_EDPD,
+				      reg | MII_KSZ9031RN_EDPD_ENABLE);
+}
+
+static int ksz9031_config_init(struct phy_device *phydev)
+{
+	const struct device *dev = &phydev->mdio.dev;
+	const struct device_node *of_node = dev->of_node;
+	static const char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
+	static const char *rx_data_skews[4] = {
+		"rxd0-skew-ps", "rxd1-skew-ps",
+		"rxd2-skew-ps", "rxd3-skew-ps"
+	};
+	static const char *tx_data_skews[4] = {
+		"txd0-skew-ps", "txd1-skew-ps",
+		"txd2-skew-ps", "txd3-skew-ps"
+	};
+	static const char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
+	const struct device *dev_walker;
+	int result;
+
+	result = ksz9031_enable_edpd(phydev);
+	if (result < 0)
+		return result;
+
+	/* The Micrel driver has a deprecated option to place phy OF
+	 * properties in the MAC node. Walk up the tree of devices to
+	 * find a device with an OF node.
+	 */
+	dev_walker = &phydev->mdio.dev;
+	do {
+		of_node = dev_walker->of_node;
+		dev_walker = dev_walker->parent;
+	} while (!of_node && dev_walker);
+
+	if (of_node) {
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_CLK_PAD_SKEW, 5,
+				clk_skews, 2);
+
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
+				control_skews, 2);
+
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
+				rx_data_skews, 4);
+
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
+				tx_data_skews, 4);
+
+		/* Silicon Errata Sheet (DS80000691D or DS80000692D):
+		 * When the device links in the 1000BASE-T slave mode only,
+		 * the optional 125MHz reference output clock (CLK125_NDO)
+		 * has wide duty cycle variation.
+		 *
+		 * The optional CLK125_NDO clock does not meet the RGMII
+		 * 45/55 percent (min/max) duty cycle requirement and therefore
+		 * cannot be used directly by the MAC side for clocking
+		 * applications that have setup/hold time requirements on
+		 * rising and falling clock edges.
+		 *
+		 * Workaround:
+		 * Force the phy to be the master to receive a stable clock
+		 * which meets the duty cycle requirement.
+		 */
+		if (of_property_read_bool(of_node, "micrel,force-master")) {
+			result = phy_read(phydev, MII_CTRL1000);
+			if (result < 0)
+				goto err_force_master;
+
+			/* enable master mode, config & prefer master */
+			result |= CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER;
+			result = phy_write(phydev, MII_CTRL1000, result);
+			if (result < 0)
+				goto err_force_master;
+		}
+	}
+
+	return ksz9031_center_flp_timing(phydev);
+
+err_force_master:
+	phydev_err(phydev, "failed to force the phy to master mode\n");
+	return result;
+}
+
+#define KSZ8873MLL_GLOBAL_CONTROL_4	0x06
+#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX	BIT(6)
+#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED	BIT(4)
+static int ksz8873mll_read_status(struct phy_device *phydev)
+{
+	int regval;
+
+	/* dummy read */
+	regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
+
+	regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
+
+	if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX)
+		phydev->duplex = DUPLEX_HALF;
+	else
+		phydev->duplex = DUPLEX_FULL;
+
+	if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_SPEED)
+		phydev->speed = SPEED_10;
+	else
+		phydev->speed = SPEED_100;
+
+	phydev->link = 1;
+	phydev->pause = phydev->asym_pause = 0;
+
+	return 0;
+}
+
+static int ksz9031_read_status(struct phy_device *phydev)
+{
+	int err;
+	int regval;
+
+	err = genphy_read_status(phydev);
+	if (err)
+		return err;
+
+	/* Make sure the PHY is not broken. Read idle error count,
+	 * and reset the PHY if it is maxed out.
+	 */
+	regval = phy_read(phydev, MII_STAT1000);
+	if ((regval & 0xFF) == 0xFF) {
+		phy_init_hw(phydev);
+		phydev->link = 0;
+		if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev))
+			phydev->drv->config_intr(phydev);
+		return genphy_config_aneg(phydev);
+	}
+
+	return 0;
+}
+
+static int ksz8873mll_config_aneg(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static int kszphy_get_sset_count(struct phy_device *phydev)
+{
+	return ARRAY_SIZE(kszphy_hw_stats);
+}
+
+static void kszphy_get_strings(struct phy_device *phydev, u8 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kszphy_hw_stats); i++) {
+		strlcpy(data + i * ETH_GSTRING_LEN,
+			kszphy_hw_stats[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+static u64 kszphy_get_stat(struct phy_device *phydev, int i)
+{
+	struct kszphy_hw_stat stat = kszphy_hw_stats[i];
+	struct kszphy_priv *priv = phydev->priv;
+	int val;
+	u64 ret;
+
+	val = phy_read(phydev, stat.reg);
+	if (val < 0) {
+		ret = U64_MAX;
+	} else {
+		val = val & ((1 << stat.bits) - 1);
+		priv->stats[i] += val;
+		ret = priv->stats[i];
+	}
+
+	return ret;
+}
+
+static void kszphy_get_stats(struct phy_device *phydev,
+			     struct ethtool_stats *stats, u64 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kszphy_hw_stats); i++)
+		data[i] = kszphy_get_stat(phydev, i);
+}
+
+static int kszphy_suspend(struct phy_device *phydev)
+{
+	/* Disable PHY Interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_DISABLED;
+		if (phydev->drv->config_intr)
+			phydev->drv->config_intr(phydev);
+	}
+
+	return genphy_suspend(phydev);
+}
+
+static int kszphy_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	genphy_resume(phydev);
+
+	/* After switching from power-down to normal mode, an internal global
+	 * reset is automatically generated. Wait a minimum of 1 ms before
+	 * read/write access to the PHY registers.
+	 */
+	usleep_range(1000, 2000);
+
+	ret = kszphy_config_reset(phydev);
+	if (ret)
+		return ret;
+
+	/* Enable PHY Interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_ENABLED;
+		if (phydev->drv->config_intr)
+			phydev->drv->config_intr(phydev);
+	}
+
+	return 0;
+}
+
+static int kszphy_probe(struct phy_device *phydev)
+{
+	const struct kszphy_type *type = phydev->drv->driver_data;
+	const struct device_node *np = phydev->mdio.dev.of_node;
+	struct kszphy_priv *priv;
+	struct clk *clk;
+	int ret;
+
+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	priv->type = type;
+
+	if (type && type->led_mode_reg) {
+		ret = of_property_read_u32(np, "micrel,led-mode",
+				&priv->led_mode);
+		if (ret)
+			priv->led_mode = -1;
+
+		if (priv->led_mode > 3) {
+			phydev_err(phydev, "invalid led mode: 0x%02x\n",
+				   priv->led_mode);
+			priv->led_mode = -1;
+		}
+	} else {
+		priv->led_mode = -1;
+	}
+
+	clk = devm_clk_get(&phydev->mdio.dev, "rmii-ref");
+	/* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */
+	if (!IS_ERR_OR_NULL(clk)) {
+		unsigned long rate = clk_get_rate(clk);
+		bool rmii_ref_clk_sel_25_mhz;
+
+		if (type)
+			priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel;
+		rmii_ref_clk_sel_25_mhz = of_property_read_bool(np,
+				"micrel,rmii-reference-clock-select-25-mhz");
+
+		if (rate > 24500000 && rate < 25500000) {
+			priv->rmii_ref_clk_sel_val = rmii_ref_clk_sel_25_mhz;
+		} else if (rate > 49500000 && rate < 50500000) {
+			priv->rmii_ref_clk_sel_val = !rmii_ref_clk_sel_25_mhz;
+		} else {
+			phydev_err(phydev, "Clock rate out of range: %ld\n",
+				   rate);
+			return -EINVAL;
+		}
+	}
+
+	/* Support legacy board-file configuration */
+	if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
+		priv->rmii_ref_clk_sel = true;
+		priv->rmii_ref_clk_sel_val = true;
+	}
+
+	return 0;
+}
+
+static struct phy_driver ksphy_driver[] = {
+{
+	.phy_id		= PHY_ID_KS8737,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KS8737",
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.driver_data	= &ks8737_type,
+	.config_init	= kszphy_config_init,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8021,
+	.phy_id_mask	= 0x00ffffff,
+	.name		= "Micrel KSZ8021 or KSZ8031",
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.driver_data	= &ksz8021_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8031,
+	.phy_id_mask	= 0x00ffffff,
+	.name		= "Micrel KSZ8031",
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.driver_data	= &ksz8021_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8041,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ8041",
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.driver_data	= &ksz8041_type,
+	.probe		= kszphy_probe,
+	.config_init	= ksz8041_config_init,
+	.config_aneg	= ksz8041_config_aneg,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	/* No suspend/resume callbacks because of errata DS80000700A,
+	 * receiver error following software power down.
+	 */
+}, {
+	.phy_id		= PHY_ID_KSZ8041RNLI,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ8041RNLI",
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.driver_data	= &ksz8041_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8051,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ8051",
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.driver_data	= &ksz8051_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8001,
+	.name		= "Micrel KSZ8001 or KS8721",
+	.phy_id_mask	= 0x00fffffc,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.driver_data	= &ksz8041_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8081,
+	.name		= "Micrel KSZ8081 or KSZ8091",
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.driver_data	= &ksz8081_type,
+	.probe		= kszphy_probe,
+	.config_init	= kszphy_config_init,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= kszphy_suspend,
+	.resume		= kszphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8061,
+	.name		= "Micrel KSZ8061",
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= ksz8061_config_init,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ9021,
+	.phy_id_mask	= 0x000ffffe,
+	.name		= "Micrel KSZ9021 Gigabit PHY",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.driver_data	= &ksz9021_type,
+	.probe		= kszphy_probe,
+	.config_init	= ksz9021_config_init,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.read_mmd	= genphy_read_mmd_unsupported,
+	.write_mmd	= genphy_write_mmd_unsupported,
+}, {
+	.phy_id		= PHY_ID_KSZ9031,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ9031 Gigabit PHY",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.driver_data	= &ksz9021_type,
+	.probe		= kszphy_probe,
+	.config_init	= ksz9031_config_init,
+	.soft_reset	= genphy_soft_reset,
+	.read_status	= ksz9031_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= kszphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8873MLL,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ8873MLL Switch",
+	.config_init	= kszphy_config_init,
+	.config_aneg	= ksz8873mll_config_aneg,
+	.read_status	= ksz8873mll_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ886X,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ886X Switch",
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8795,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ8795",
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= ksz8873mll_config_aneg,
+	.read_status	= ksz8873mll_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ9477,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Microchip KSZ9477",
+	.features	= PHY_GBIT_FEATURES,
+	.config_init	= kszphy_config_init,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+} };
+
+module_phy_driver(ksphy_driver);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id __maybe_unused micrel_tbl[] = {
+	{ PHY_ID_KSZ9021, 0x000ffffe },
+	{ PHY_ID_KSZ9031, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8001, 0x00fffffc },
+	{ PHY_ID_KS8737, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8021, 0x00ffffff },
+	{ PHY_ID_KSZ8031, 0x00ffffff },
+	{ PHY_ID_KSZ8041, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8051, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8061, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8081, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ8873MLL, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ886X, MICREL_PHY_ID_MASK },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, micrel_tbl);