Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 247 insertions, 0 deletions

diff --git a/drivers/net/wireless/mac80211_hwsim.h b/drivers/net/wireless/mac80211_hwsim.h
new file mode 100644
index 000000000..0fe3199f8
--- /dev/null
+++ b/drivers/net/wireless/mac80211_hwsim.h
@@ -0,0 +1,247 @@
+/*
+ * mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211
+ * Copyright (c) 2008, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2011, Javier Lopez <jlopex@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MAC80211_HWSIM_H
+#define __MAC80211_HWSIM_H
+
+/**
+ * enum hwsim_tx_control_flags - flags to describe transmission info/status
+ *
+ * These flags are used to give the wmediumd extra information in order to
+ * modify its behavior for each frame
+ *
+ * @HWSIM_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame.
+ * @HWSIM_TX_CTL_NO_ACK: tell the wmediumd not to wait for an ack
+ * @HWSIM_TX_STAT_ACK: Frame was acknowledged
+ *
+ */
+enum hwsim_tx_control_flags {
+	HWSIM_TX_CTL_REQ_TX_STATUS		= BIT(0),
+	HWSIM_TX_CTL_NO_ACK			= BIT(1),
+	HWSIM_TX_STAT_ACK			= BIT(2),
+};
+
+/**
+ * DOC: Frame transmission/registration support
+ *
+ * Frame transmission and registration support exists to allow userspace
+ * entities such as wmediumd to receive and process all broadcasted
+ * frames from a mac80211_hwsim radio device.
+ *
+ * This allow user space applications to decide if the frame should be
+ * dropped or not and implement a wireless medium simulator at user space.
+ *
+ * Registration is done by sending a register message to the driver and
+ * will be automatically unregistered if the user application doesn't
+ * responds to sent frames.
+ * Once registered the user application has to take responsibility of
+ * broadcasting the frames to all listening mac80211_hwsim radio
+ * interfaces.
+ *
+ * For more technical details, see the corresponding command descriptions
+ * below.
+ */
+
+/**
+ * enum hwsim_commands - supported hwsim commands
+ *
+ * @HWSIM_CMD_UNSPEC: unspecified command to catch errors
+ *
+ * @HWSIM_CMD_REGISTER: request to register and received all broadcasted
+ *	frames by any mac80211_hwsim radio device.
+ * @HWSIM_CMD_FRAME: send/receive a broadcasted frame from/to kernel/user
+ *	space, uses:
+ *	%HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_ADDR_RECEIVER,
+ *	%HWSIM_ATTR_FRAME, %HWSIM_ATTR_FLAGS, %HWSIM_ATTR_RX_RATE,
+ *	%HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE, %HWSIM_ATTR_FREQ (optional)
+ * @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to
+ *	kernel, uses:
+ *	%HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FLAGS,
+ *	%HWSIM_ATTR_TX_INFO, %WSIM_ATTR_TX_INFO_FLAGS,
+ *	%HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE
+ * @HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters,
+ *	returns the radio ID (>= 0) or negative on errors, if successful
+ *	then multicast the result, uses optional parameter:
+ *	%HWSIM_ATTR_REG_STRICT_REG, %HWSIM_ATTR_SUPPORT_P2P_DEVICE,
+ *	%HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE, %HWSIM_ATTR_CHANNELS,
+ *	%HWSIM_ATTR_NO_VIF, %HWSIM_ATTR_RADIO_NAME, %HWSIM_ATTR_USE_CHANCTX,
+ *	%HWSIM_ATTR_REG_HINT_ALPHA2, %HWSIM_ATTR_REG_CUSTOM_REG,
+ *	%HWSIM_ATTR_PERM_ADDR
+ * @HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted
+ * @HWSIM_CMD_GET_RADIO: fetch information about existing radios, uses:
+ *	%HWSIM_ATTR_RADIO_ID
+ * @__HWSIM_CMD_MAX: enum limit
+ */
+enum {
+	HWSIM_CMD_UNSPEC,
+	HWSIM_CMD_REGISTER,
+	HWSIM_CMD_FRAME,
+	HWSIM_CMD_TX_INFO_FRAME,
+	HWSIM_CMD_NEW_RADIO,
+	HWSIM_CMD_DEL_RADIO,
+	HWSIM_CMD_GET_RADIO,
+	__HWSIM_CMD_MAX,
+};
+#define HWSIM_CMD_MAX (_HWSIM_CMD_MAX - 1)
+
+#define HWSIM_CMD_CREATE_RADIO   HWSIM_CMD_NEW_RADIO
+#define HWSIM_CMD_DESTROY_RADIO  HWSIM_CMD_DEL_RADIO
+
+/**
+ * enum hwsim_attrs - hwsim netlink attributes
+ *
+ * @HWSIM_ATTR_UNSPEC: unspecified attribute to catch errors
+ *
+ * @HWSIM_ATTR_ADDR_RECEIVER: MAC address of the radio device that
+ *	the frame is broadcasted to
+ * @HWSIM_ATTR_ADDR_TRANSMITTER: MAC address of the radio device that
+ *	the frame was broadcasted from
+ * @HWSIM_ATTR_FRAME: Data array
+ * @HWSIM_ATTR_FLAGS: mac80211 transmission flags, used to process
+	properly the frame at user space
+ * @HWSIM_ATTR_RX_RATE: estimated rx rate index for this frame at user
+	space
+ * @HWSIM_ATTR_SIGNAL: estimated RX signal for this frame at user
+	space
+ * @HWSIM_ATTR_TX_INFO: ieee80211_tx_rate array
+ * @HWSIM_ATTR_COOKIE: sk_buff cookie to identify the frame
+ * @HWSIM_ATTR_CHANNELS: u32 attribute used with the %HWSIM_CMD_CREATE_RADIO
+ *	command giving the number of channels supported by the new radio
+ * @HWSIM_ATTR_RADIO_ID: u32 attribute used with %HWSIM_CMD_DESTROY_RADIO
+ *	only to destroy a radio
+ * @HWSIM_ATTR_REG_HINT_ALPHA2: alpha2 for regulatoro driver hint
+ *	(nla string, length 2)
+ * @HWSIM_ATTR_REG_CUSTOM_REG: custom regulatory domain index (u32 attribute)
+ * @HWSIM_ATTR_REG_STRICT_REG: request REGULATORY_STRICT_REG (flag attribute)
+ * @HWSIM_ATTR_SUPPORT_P2P_DEVICE: support P2P Device virtual interface (flag)
+ * @HWSIM_ATTR_USE_CHANCTX: used with the %HWSIM_CMD_CREATE_RADIO
+ *	command to force use of channel contexts even when only a
+ *	single channel is supported
+ * @HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE: used with the %HWSIM_CMD_CREATE_RADIO
+ *	command to force radio removal when process that created the radio dies
+ * @HWSIM_ATTR_RADIO_NAME: Name of radio, e.g. phy666
+ * @HWSIM_ATTR_NO_VIF:  Do not create vif (wlanX) when creating radio.
+ * @HWSIM_ATTR_FREQ: Frequency at which packet is transmitted or received.
+ * @HWSIM_ATTR_TX_INFO_FLAGS: additional flags for corresponding
+ *	rates of %HWSIM_ATTR_TX_INFO
+ * @HWSIM_ATTR_PERM_ADDR: permanent mac address of new radio
+ * @__HWSIM_ATTR_MAX: enum limit
+ */
+
+
+enum {
+	HWSIM_ATTR_UNSPEC,
+	HWSIM_ATTR_ADDR_RECEIVER,
+	HWSIM_ATTR_ADDR_TRANSMITTER,
+	HWSIM_ATTR_FRAME,
+	HWSIM_ATTR_FLAGS,
+	HWSIM_ATTR_RX_RATE,
+	HWSIM_ATTR_SIGNAL,
+	HWSIM_ATTR_TX_INFO,
+	HWSIM_ATTR_COOKIE,
+	HWSIM_ATTR_CHANNELS,
+	HWSIM_ATTR_RADIO_ID,
+	HWSIM_ATTR_REG_HINT_ALPHA2,
+	HWSIM_ATTR_REG_CUSTOM_REG,
+	HWSIM_ATTR_REG_STRICT_REG,
+	HWSIM_ATTR_SUPPORT_P2P_DEVICE,
+	HWSIM_ATTR_USE_CHANCTX,
+	HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE,
+	HWSIM_ATTR_RADIO_NAME,
+	HWSIM_ATTR_NO_VIF,
+	HWSIM_ATTR_FREQ,
+	HWSIM_ATTR_PAD,
+	HWSIM_ATTR_TX_INFO_FLAGS,
+	HWSIM_ATTR_PERM_ADDR,
+	__HWSIM_ATTR_MAX,
+};
+#define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1)
+
+/**
+ * struct hwsim_tx_rate - rate selection/status
+ *
+ * @idx: rate index to attempt to send with
+ * @count: number of tries in this rate before going to the next rate
+ *
+ * A value of -1 for @idx indicates an invalid rate and, if used
+ * in an array of retry rates, that no more rates should be tried.
+ *
+ * When used for transmit status reporting, the driver should
+ * always report the rate and number of retries used.
+ *
+ */
+struct hwsim_tx_rate {
+	s8 idx;
+	u8 count;
+} __packed;
+
+/**
+ * enum hwsim_tx_rate_flags - per-rate flags set by the rate control algorithm.
+ *	Inspired by structure mac80211_rate_control_flags. New flags may be
+ *	appended, but old flags not deleted, to keep compatibility for
+ *	userspace.
+ *
+ * These flags are set by the Rate control algorithm for each rate during tx,
+ * in the @flags member of struct ieee80211_tx_rate.
+ *
+ * @MAC80211_HWSIM_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
+ * @MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
+ *	This is set if the current BSS requires ERP protection.
+ * @MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
+ * @MAC80211_HWSIM_TX_RC_MCS: HT rate.
+ * @MAC80211_HWSIM_TX_RC_VHT_MCS: VHT MCS rate, in this case the idx field is
+ *	split into a higher 4 bits (Nss) and lower 4 bits (MCS number)
+ * @MAC80211_HWSIM_TX_RC_GREEN_FIELD: Indicates whether this rate should be used
+ *	in Greenfield mode.
+ * @MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be
+ *	40 MHz.
+ * @MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH: Indicates 80 MHz transmission
+ * @MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH: Indicates 160 MHz transmission
+ *	(80+80 isn't supported yet)
+ * @MAC80211_HWSIM_TX_RC_DUP_DATA: The frame should be transmitted on both of
+ *	the adjacent 20 MHz channels, if the current channel type is
+ *	NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
+ * @MAC80211_HWSIM_TX_RC_SHORT_GI: Short Guard interval should be used for this
+ *	rate.
+ */
+enum hwsim_tx_rate_flags {
+	MAC80211_HWSIM_TX_RC_USE_RTS_CTS		= BIT(0),
+	MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT		= BIT(1),
+	MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE	= BIT(2),
+
+	/* rate index is an HT/VHT MCS instead of an index */
+	MAC80211_HWSIM_TX_RC_MCS			= BIT(3),
+	MAC80211_HWSIM_TX_RC_GREEN_FIELD		= BIT(4),
+	MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH		= BIT(5),
+	MAC80211_HWSIM_TX_RC_DUP_DATA		= BIT(6),
+	MAC80211_HWSIM_TX_RC_SHORT_GI		= BIT(7),
+	MAC80211_HWSIM_TX_RC_VHT_MCS			= BIT(8),
+	MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH		= BIT(9),
+	MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH		= BIT(10),
+};
+
+/**
+ * struct hwsim_tx_rate - rate selection/status
+ *
+ * @idx: rate index to attempt to send with
+ * @count: number of tries in this rate before going to the next rate
+ *
+ * A value of -1 for @idx indicates an invalid rate and, if used
+ * in an array of retry rates, that no more rates should be tried.
+ *
+ * When used for transmit status reporting, the driver should
+ * always report the rate and number of retries used.
+ *
+ */
+struct hwsim_tx_rate_flag {
+	s8 idx;
+	u16 flags;
+} __packed;
+#endif /* __MAC80211_HWSIM_H */