Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

25 files changed, 8070 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtl818x/Kconfig b/drivers/net/wireless/realtek/rtl818x/Kconfig
new file mode 100644
index 000000000..1ce1d55f0
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/Kconfig
@@ -0,0 +1,88 @@
+#
+# RTL818X Wireless LAN device configuration
+#
+config RTL8180
+	tristate "Realtek 8180/8185/8187SE PCI support"
+	depends on MAC80211 && PCI
+	select EEPROM_93CX6
+	---help---
+	  This is a driver for RTL8180, RTL8185 and RTL8187SE based cards.
+	  These are PCI based chips found in cards such as:
+
+	  (RTL8185 802.11g)
+	  A-Link WL54PC
+
+	  (RTL8180 802.11b)
+	  Belkin F5D6020 v3
+	  Belkin F5D6020 v3
+	  Dlink DWL-610
+	  Dlink DWL-510
+	  Netgear MA521
+	  Level-One WPC-0101
+	  Acer Aspire 1357 LMi
+	  VCTnet PC-11B1
+	  Ovislink AirLive WL-1120PCM
+	  Mentor WL-PCI
+	  Linksys WPC11 v4
+	  TrendNET TEW-288PI
+	  D-Link DWL-520 Rev D
+	  Repotec RP-WP7126
+	  TP-Link TL-WN250/251
+	  Zonet ZEW1000
+	  Longshine LCS-8031-R
+	  HomeLine HLW-PCC200
+	  GigaFast WF721-AEX
+	  Planet WL-3553
+	  Encore ENLWI-PCI1-NT
+	  TrendNET TEW-266PC
+	  Gigabyte GN-WLMR101
+	  Siemens-fujitsu Amilo D1840W
+	  Edimax EW-7126
+	  PheeNet WL-11PCIR
+	  Tonze PC-2100T
+	  Planet WL-8303
+	  Dlink DWL-650 v M1
+	  Edimax EW-7106
+	  Q-Tec 770WC
+	  Topcom Skyr@cer 4011b
+	  Roper FreeLan 802.11b (edition 2004)
+	  Wistron Neweb Corp CB-200B
+	  Pentagram HorNET
+	  QTec 775WC
+	  TwinMOS Booming B Series
+	  Micronet SP906BB
+	  Sweex LC700010
+	  Surecom EP-9428
+	  Safecom SWLCR-1100
+
+	  Thanks to Realtek for their support!
+
+config RTL8187
+	tristate "Realtek 8187 and 8187B USB support"
+	depends on MAC80211 && USB
+	select EEPROM_93CX6
+	---help---
+	  This is a driver for RTL8187 and RTL8187B based cards.
+	  These are USB based chips found in devices such as:
+
+	  Netgear WG111v2
+	  Level 1 WNC-0301USB
+	  Micronet SP907GK V5
+	  Encore ENUWI-G2
+	  Trendnet TEW-424UB
+	  ASUS P5B Deluxe/P5K Premium motherboards
+	  Toshiba Satellite Pro series of laptops
+	  Asus Wireless Link
+	  Linksys WUSB54GC-EU v2
+	    (v1 = rt73usb; v3 is rt2070-based,
+	     use staging/rt3070 or try rt2800usb)
+
+	  Thanks to Realtek for their support!
+
+# If possible, automatically enable LEDs for RTL8187.
+
+config RTL8187_LEDS
+	bool
+	depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = RTL8187)
+	default y
+
diff --git a/drivers/net/wireless/realtek/rtl818x/Makefile b/drivers/net/wireless/realtek/rtl818x/Makefile
new file mode 100644
index 000000000..997569076
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_RTL8180)	+= rtl8180/
+obj-$(CONFIG_RTL8187)	+= rtl8187/
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile b/drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile
new file mode 100644
index 000000000..2966681ef
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile
@@ -0,0 +1,5 @@
+rtl818x_pci-objs	:= dev.o rtl8225.o sa2400.o max2820.o grf5101.o rtl8225se.o
+
+obj-$(CONFIG_RTL8180)	+= rtl818x_pci.o
+
+ccflags-y += -Idrivers/net/wireless/realtek/rtl818x
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
new file mode 100644
index 000000000..77bf8a601
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
@@ -0,0 +1,2003 @@
+
+/* Linux device driver for RTL8180 / RTL8185 / RTL8187SE
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007,2014 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8180 driver, which is:
+ * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * Thanks to Realtek for their support!
+ *
+ ************************************************************************
+ *
+ * The driver was extended to the RTL8187SE in 2014 by
+ * Andrea Merello <andrea.merello@gmail.com>
+ *
+ * based also on:
+ *  - portions of rtl8187se Linux staging driver, Copyright Realtek corp.
+ *    (available in drivers/staging/rtl8187se directory of Linux 3.14)
+ *  - other GPL, unpublished (until now), Linux driver code,
+ *    Copyright Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * A huge thanks goes to Sara V. Nari who forgives me when I'm
+ * sitting in front of my laptop at evening, week-end, night...
+ *
+ * A special thanks goes to Antonio Cuni, who helped me with
+ * some python userspace stuff I used to debug RTL8187SE code, and who
+ * bought a laptop with an unsupported Wi-Fi card some years ago...
+ *
+ * Thanks to Larry Finger for writing some code for rtl8187se and for
+ * his suggestions.
+ *
+ * Thanks to Dan Carpenter for reviewing my initial patch and for his
+ * suggestions.
+ *
+ * Thanks to Bernhard Schiffner for his help in testing and for his
+ * suggestions.
+ *
+ ************************************************************************
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/eeprom_93cx6.h>
+#include <linux/module.h>
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "rtl8225.h"
+#include "sa2400.h"
+#include "max2820.h"
+#include "grf5101.h"
+#include "rtl8225se.h"
+
+MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
+MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>");
+MODULE_DESCRIPTION("RTL8180 / RTL8185 / RTL8187SE PCI wireless driver");
+MODULE_LICENSE("GPL");
+
+static const struct pci_device_id rtl8180_table[] = {
+
+	/* rtl8187se */
+	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8199) },
+
+	/* rtl8185 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) },
+
+	/* rtl8180 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) },
+	{ PCI_DEVICE(0x1799, 0x6001) },
+	{ PCI_DEVICE(0x1799, 0x6020) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) },
+	{ PCI_DEVICE(0x1186, 0x3301) },
+	{ PCI_DEVICE(0x1432, 0x7106) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, rtl8180_table);
+
+static const struct ieee80211_rate rtl818x_rates[] = {
+	{ .bitrate = 10, .hw_value = 0, },
+	{ .bitrate = 20, .hw_value = 1, },
+	{ .bitrate = 55, .hw_value = 2, },
+	{ .bitrate = 110, .hw_value = 3, },
+	{ .bitrate = 60, .hw_value = 4, },
+	{ .bitrate = 90, .hw_value = 5, },
+	{ .bitrate = 120, .hw_value = 6, },
+	{ .bitrate = 180, .hw_value = 7, },
+	{ .bitrate = 240, .hw_value = 8, },
+	{ .bitrate = 360, .hw_value = 9, },
+	{ .bitrate = 480, .hw_value = 10, },
+	{ .bitrate = 540, .hw_value = 11, },
+};
+
+static const struct ieee80211_channel rtl818x_channels[] = {
+	{ .center_freq = 2412 },
+	{ .center_freq = 2417 },
+	{ .center_freq = 2422 },
+	{ .center_freq = 2427 },
+	{ .center_freq = 2432 },
+	{ .center_freq = 2437 },
+	{ .center_freq = 2442 },
+	{ .center_freq = 2447 },
+	{ .center_freq = 2452 },
+	{ .center_freq = 2457 },
+	{ .center_freq = 2462 },
+	{ .center_freq = 2467 },
+	{ .center_freq = 2472 },
+	{ .center_freq = 2484 },
+};
+
+/* Queues for rtl8187se card
+ *
+ * name | reg  |  queue
+ *  BC  |  7   |   6
+ *  MG  |  1   |   0
+ *  HI  |  6   |   1
+ *  VO  |  5   |   2
+ *  VI  |  4   |   3
+ *  BE  |  3   |   4
+ *  BK  |  2   |   5
+ *
+ * The complete map for DMA kick reg using use all queue is:
+ * static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] =
+ *	{1, 6, 5, 4, 3, 2, 7};
+ *
+ * .. but.. Because for mac80211 4 queues are enough for QoS we use this
+ *
+ * name | reg  |  queue
+ *  BC  |  7   |   4  <- currently not used yet
+ *  MG  |  1   |   x  <- Not used
+ *  HI  |  6   |   x  <- Not used
+ *  VO  |  5   |   0  <- used
+ *  VI  |  4   |   1  <- used
+ *  BE  |  3   |   2  <- used
+ *  BK  |  2   |   3  <- used
+ *
+ * Beacon queue could be used, but this is not finished yet.
+ *
+ * I thougth about using the other two queues but I decided not to do this:
+ *
+ * - I'm unsure whether the mac80211 will ever try to use more than 4 queues
+ *   by itself.
+ *
+ * - I could route MGMT frames (currently sent over VO queue) to the MGMT
+ *   queue but since mac80211 will do not know about it, I will probably gain
+ *   some HW priority whenever the VO queue is not empty, but this gain is
+ *   limited by the fact that I had to stop the mac80211 queue whenever one of
+ *   the VO or MGMT queues is full, stopping also submitting of MGMT frame
+ *   to the driver.
+ *
+ * - I don't know how to set in the HW the contention window params for MGMT
+ *   and HI-prio queues.
+ */
+
+static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = {5, 4, 3, 2, 7};
+
+/* Queues for rtl8180/rtl8185 cards
+ *
+ * name | reg  |  prio
+ *  BC  |  7   |   3
+ *  HI  |  6   |   0
+ *  NO  |  5   |   1
+ *  LO  |  4   |   2
+ *
+ * The complete map for DMA kick reg using all queue is:
+ * static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {6, 5, 4, 7};
+ *
+ * .. but .. Because the mac80211 needs at least 4 queues for QoS or
+ * otherwise QoS can't be done, we use just one.
+ * Beacon queue could be used, but this is not finished yet.
+ * Actual map is:
+ *
+ * name | reg  |  prio
+ *  BC  |  7   |   1  <- currently not used yet.
+ *  HI  |  6   |   x  <- not used
+ *  NO  |  5   |   x  <- not used
+ *  LO  |  4   |   0  <- used
+ */
+
+static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {4, 7};
+
+/* LNA gain table for rtl8187se */
+static const u8 rtl8187se_lna_gain[4] = {02, 17, 29, 39};
+
+void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int i = 10;
+	u32 buf;
+
+	buf = (data << 8) | addr;
+
+	rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80);
+	while (i--) {
+		rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf);
+		if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF))
+			return;
+	}
+}
+
+static void rtl8180_handle_rx(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl818x_rx_cmd_desc *cmd_desc;
+	unsigned int count = 32;
+	u8 agc, sq;
+	s8 signal = 1;
+	dma_addr_t mapping;
+
+	while (count--) {
+		void *entry = priv->rx_ring + priv->rx_idx * priv->rx_ring_sz;
+		struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
+		u32 flags, flags2, flags3 = 0;
+		u64 tsft;
+
+		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+			struct rtl8187se_rx_desc *desc = entry;
+
+			flags = le32_to_cpu(desc->flags);
+			/* if ownership flag is set, then we can trust the
+			 * HW has written other fields. We must not trust
+			 * other descriptor data read before we checked (read)
+			 * the ownership flag
+			 */
+			rmb();
+			flags3 = le32_to_cpu(desc->flags3);
+			flags2 = le32_to_cpu(desc->flags2);
+			tsft = le64_to_cpu(desc->tsft);
+		} else {
+			struct rtl8180_rx_desc *desc = entry;
+
+			flags = le32_to_cpu(desc->flags);
+			/* same as above */
+			rmb();
+			flags2 = le32_to_cpu(desc->flags2);
+			tsft = le64_to_cpu(desc->tsft);
+		}
+
+		if (flags & RTL818X_RX_DESC_FLAG_OWN)
+			return;
+
+		if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL |
+				      RTL818X_RX_DESC_FLAG_FOF |
+				      RTL818X_RX_DESC_FLAG_RX_ERR)))
+			goto done;
+		else {
+			struct ieee80211_rx_status rx_status = {0};
+			struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE);
+
+			if (unlikely(!new_skb))
+				goto done;
+
+			mapping = pci_map_single(priv->pdev,
+					       skb_tail_pointer(new_skb),
+					       MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+
+			if (pci_dma_mapping_error(priv->pdev, mapping)) {
+				kfree_skb(new_skb);
+				dev_err(&priv->pdev->dev, "RX DMA map error\n");
+
+				goto done;
+			}
+
+			pci_unmap_single(priv->pdev,
+					 *((dma_addr_t *)skb->cb),
+					 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+			skb_put(skb, flags & 0xFFF);
+
+			rx_status.antenna = (flags2 >> 15) & 1;
+			rx_status.rate_idx = (flags >> 20) & 0xF;
+			agc = (flags2 >> 17) & 0x7F;
+
+			switch (priv->chip_family) {
+			case RTL818X_CHIP_FAMILY_RTL8185:
+				if (rx_status.rate_idx > 3)
+					signal = -clamp_t(u8, agc, 25, 90) - 9;
+				else
+					signal = -clamp_t(u8, agc, 30, 95);
+				break;
+			case RTL818X_CHIP_FAMILY_RTL8180:
+				sq = flags2 & 0xff;
+				signal = priv->rf->calc_rssi(agc, sq);
+				break;
+			case RTL818X_CHIP_FAMILY_RTL8187SE:
+				/* OFDM measure reported by HW is signed,
+				 * in 0.5dBm unit, with zero centered @ -41dBm
+				 * input signal.
+				 */
+				if (rx_status.rate_idx > 3) {
+					signal = (s8)((flags3 >> 16) & 0xff);
+					signal = signal / 2 - 41;
+				} else {
+					int idx, bb;
+
+					idx = (agc & 0x60) >> 5;
+					bb = (agc & 0x1F) * 2;
+					/* bias + BB gain + LNA gain */
+					signal = 4 - bb - rtl8187se_lna_gain[idx];
+				}
+				break;
+			}
+			rx_status.signal = signal;
+			rx_status.freq = dev->conf.chandef.chan->center_freq;
+			rx_status.band = dev->conf.chandef.chan->band;
+			rx_status.mactime = tsft;
+			rx_status.flag |= RX_FLAG_MACTIME_START;
+			if (flags & RTL818X_RX_DESC_FLAG_SPLCP)
+				rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE;
+			if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
+				rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
+
+			memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+			ieee80211_rx_irqsafe(dev, skb);
+
+			skb = new_skb;
+			priv->rx_buf[priv->rx_idx] = skb;
+			*((dma_addr_t *) skb->cb) = mapping;
+		}
+
+	done:
+		cmd_desc = entry;
+		cmd_desc->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
+		cmd_desc->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
+					   MAX_RX_SIZE);
+		if (priv->rx_idx == 31)
+			cmd_desc->flags |=
+				cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
+		priv->rx_idx = (priv->rx_idx + 1) % 32;
+	}
+}
+
+static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
+
+	while (skb_queue_len(&ring->queue)) {
+		struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
+		struct sk_buff *skb;
+		struct ieee80211_tx_info *info;
+		u32 flags = le32_to_cpu(entry->flags);
+
+		if (flags & RTL818X_TX_DESC_FLAG_OWN)
+			return;
+
+		ring->idx = (ring->idx + 1) % ring->entries;
+		skb = __skb_dequeue(&ring->queue);
+		pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
+				 skb->len, PCI_DMA_TODEVICE);
+
+		info = IEEE80211_SKB_CB(skb);
+		ieee80211_tx_info_clear_status(info);
+
+		if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+		    (flags & RTL818X_TX_DESC_FLAG_TX_OK))
+			info->flags |= IEEE80211_TX_STAT_ACK;
+
+		info->status.rates[0].count = (flags & 0xFF) + 1;
+
+		ieee80211_tx_status_irqsafe(dev, skb);
+		if (ring->entries - skb_queue_len(&ring->queue) == 2)
+			ieee80211_wake_queue(dev, prio);
+	}
+}
+
+static irqreturn_t rtl8187se_interrupt(int irq, void *dev_id)
+{
+	struct ieee80211_hw *dev = dev_id;
+	struct rtl8180_priv *priv = dev->priv;
+	u32 reg;
+	unsigned long flags;
+	static int desc_err;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* Note: 32-bit interrupt status */
+	reg = rtl818x_ioread32(priv, &priv->map->INT_STATUS_SE);
+	if (unlikely(reg == 0xFFFFFFFF)) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		return IRQ_HANDLED;
+	}
+
+	rtl818x_iowrite32(priv, &priv->map->INT_STATUS_SE, reg);
+
+	if (reg & IMR_TIMEOUT1)
+		rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+
+	if (reg & (IMR_TBDOK | IMR_TBDER))
+		rtl8180_handle_tx(dev, 4);
+
+	if (reg & (IMR_TVODOK | IMR_TVODER))
+		rtl8180_handle_tx(dev, 0);
+
+	if (reg & (IMR_TVIDOK | IMR_TVIDER))
+		rtl8180_handle_tx(dev, 1);
+
+	if (reg & (IMR_TBEDOK | IMR_TBEDER))
+		rtl8180_handle_tx(dev, 2);
+
+	if (reg & (IMR_TBKDOK | IMR_TBKDER))
+		rtl8180_handle_tx(dev, 3);
+
+	if (reg & (IMR_ROK | IMR_RER | RTL818X_INT_SE_RX_DU | IMR_RQOSOK))
+		rtl8180_handle_rx(dev);
+	/* The interface sometimes generates several RX DMA descriptor errors
+	 * at startup. Do not report these.
+	 */
+	if ((reg & RTL818X_INT_SE_RX_DU) && desc_err++ > 2)
+		if (net_ratelimit())
+			wiphy_err(dev->wiphy, "No RX DMA Descriptor avail\n");
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
+{
+	struct ieee80211_hw *dev = dev_id;
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg;
+
+	spin_lock(&priv->lock);
+	reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS);
+	if (unlikely(reg == 0xFFFF)) {
+		spin_unlock(&priv->lock);
+		return IRQ_HANDLED;
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
+
+	if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
+		rtl8180_handle_tx(dev, 1);
+
+	if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
+		rtl8180_handle_tx(dev, 0);
+
+	if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR))
+		rtl8180_handle_rx(dev);
+
+	spin_unlock(&priv->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void rtl8180_tx(struct ieee80211_hw *dev,
+		       struct ieee80211_tx_control *control,
+		       struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_tx_ring *ring;
+	struct rtl8180_tx_desc *entry;
+	unsigned int prio = 0;
+	unsigned long flags;
+	unsigned int idx, hw_prio;
+
+	dma_addr_t mapping;
+	u32 tx_flags;
+	u8 rc_flags;
+	u16 plcp_len = 0;
+	__le16 rts_duration = 0;
+	/* do arithmetic and then convert to le16 */
+	u16 frame_duration = 0;
+
+	/* rtl8180/rtl8185 only has one useable tx queue */
+	if (dev->queues > IEEE80211_AC_BK)
+		prio = skb_get_queue_mapping(skb);
+	ring = &priv->tx_ring[prio];
+
+	mapping = pci_map_single(priv->pdev, skb->data,
+				 skb->len, PCI_DMA_TODEVICE);
+
+	if (pci_dma_mapping_error(priv->pdev, mapping)) {
+		kfree_skb(skb);
+		dev_err(&priv->pdev->dev, "TX DMA mapping error\n");
+		return;
+	}
+
+	tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
+		   RTL818X_TX_DESC_FLAG_LS |
+		   (ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
+		   skb->len;
+
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
+		tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
+			    RTL818X_TX_DESC_FLAG_NO_ENC;
+
+	rc_flags = info->control.rates[0].flags;
+
+	/* HW will perform RTS-CTS when only RTS flags is set.
+	 * HW will perform CTS-to-self when both RTS and CTS flags are set.
+	 * RTS rate and RTS duration will be used also for CTS-to-self.
+	 */
+	if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+		tx_flags |= RTL818X_TX_DESC_FLAG_RTS;
+		tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
+		rts_duration = ieee80211_rts_duration(dev, priv->vif,
+						skb->len, info);
+	} else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+		tx_flags |= RTL818X_TX_DESC_FLAG_RTS | RTL818X_TX_DESC_FLAG_CTS;
+		tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
+		rts_duration = ieee80211_ctstoself_duration(dev, priv->vif,
+						skb->len, info);
+	}
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
+		unsigned int remainder;
+
+		plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
+				(ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
+		remainder = (16 * (skb->len + 4)) %
+			    ((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
+		if (remainder <= 6)
+			plcp_len |= 1 << 15;
+	}
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		__le16 duration;
+		/* SIFS time (required by HW) is already included by
+		 * ieee80211_generic_frame_duration
+		 */
+		duration = ieee80211_generic_frame_duration(dev, priv->vif,
+					NL80211_BAND_2GHZ, skb->len,
+					ieee80211_get_tx_rate(dev, info));
+
+		frame_duration =  priv->ack_time + le16_to_cpu(duration);
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			priv->seqno += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+	}
+
+	idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
+	entry = &ring->desc[idx];
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		entry->frame_duration = cpu_to_le16(frame_duration);
+		entry->frame_len_se = cpu_to_le16(skb->len);
+
+		/* tpc polarity */
+		entry->flags3 = cpu_to_le16(1<<4);
+	} else
+		entry->frame_len = cpu_to_le32(skb->len);
+
+	entry->rts_duration = rts_duration;
+	entry->plcp_len = cpu_to_le16(plcp_len);
+	entry->tx_buf = cpu_to_le32(mapping);
+
+	entry->retry_limit = info->control.rates[0].count - 1;
+
+	/* We must be sure that tx_flags is written last because the HW
+	 * looks at it to check if the rest of data is valid or not
+	 */
+	wmb();
+	entry->flags = cpu_to_le32(tx_flags);
+	/* We must be sure this has been written before followings HW
+	 * register write, because this write will made the HW attempts
+	 * to DMA the just-written data
+	 */
+	wmb();
+
+	__skb_queue_tail(&ring->queue, skb);
+	if (ring->entries - skb_queue_len(&ring->queue) < 2)
+		ieee80211_stop_queue(dev, prio);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		/* just poll: rings are stopped with TPPollStop reg */
+		hw_prio = rtl8187se_queues_map[prio];
+		rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+			 (1 << hw_prio));
+	} else {
+		hw_prio = rtl8180_queues_map[prio];
+		rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+			 (1 << hw_prio) | /* ring to poll  */
+			 (1<<1) | (1<<2));/* stopped rings */
+	}
+}
+
+static void rtl8180_set_anaparam3(struct rtl8180_priv *priv, u16 anaparam3)
+{
+	u8 reg;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_CONFIG);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite16(priv, &priv->map->ANAPARAM3, anaparam3);
+
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_NORMAL);
+}
+
+void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2)
+{
+	u8 reg;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_CONFIG);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
+
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_NORMAL);
+}
+
+void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
+{
+	u8 reg;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+}
+
+static void rtl8187se_mac_config(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 reg;
+
+	rtl818x_iowrite32(priv, REG_ADDR4(0x1F0), 0);
+	rtl818x_ioread32(priv, REG_ADDR4(0x1F0));
+	rtl818x_iowrite32(priv, REG_ADDR4(0x1F4), 0);
+	rtl818x_ioread32(priv, REG_ADDR4(0x1F4));
+	rtl818x_iowrite8(priv, REG_ADDR1(0x1F8), 0);
+	rtl818x_ioread8(priv, REG_ADDR1(0x1F8));
+	/* Enable DA10 TX power saving */
+	reg = rtl818x_ioread8(priv, &priv->map->PHY_PR);
+	rtl818x_iowrite8(priv, &priv->map->PHY_PR, reg | 0x04);
+	/* Power */
+	rtl818x_iowrite16(priv, PI_DATA_REG, 0x1000);
+	rtl818x_iowrite16(priv, SI_DATA_REG, 0x1000);
+	/* AFE - default to power ON */
+	rtl818x_iowrite16(priv, REG_ADDR2(0x370), 0x0560);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x372), 0x0560);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x374), 0x0DA4);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x376), 0x0DA4);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x378), 0x0560);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x37A), 0x0560);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x37C), 0x00EC);
+	rtl818x_iowrite16(priv, REG_ADDR2(0x37E), 0x00EC);
+	rtl818x_iowrite8(priv, REG_ADDR1(0x24E), 0x01);
+	/* unknown, needed for suspend to RAM resume */
+	rtl818x_iowrite8(priv, REG_ADDR1(0x0A), 0x72);
+}
+
+static void rtl8187se_set_antenna_config(struct ieee80211_hw *dev, u8 def_ant,
+					 bool diversity)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	rtl8225_write_phy_cck(dev, 0x0C, 0x09);
+	if (diversity) {
+		if (def_ant == 1) {
+			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00);
+			rtl8225_write_phy_cck(dev, 0x11, 0xBB);
+			rtl8225_write_phy_cck(dev, 0x01, 0xC7);
+			rtl8225_write_phy_ofdm(dev, 0x0D, 0x54);
+			rtl8225_write_phy_ofdm(dev, 0x18, 0xB2);
+		} else { /* main antenna */
+			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
+			rtl8225_write_phy_cck(dev, 0x11, 0x9B);
+			rtl8225_write_phy_cck(dev, 0x01, 0xC7);
+			rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C);
+			rtl8225_write_phy_ofdm(dev, 0x18, 0xB2);
+		}
+	} else { /* disable antenna diversity */
+		if (def_ant == 1) {
+			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00);
+			rtl8225_write_phy_cck(dev, 0x11, 0xBB);
+			rtl8225_write_phy_cck(dev, 0x01, 0x47);
+			rtl8225_write_phy_ofdm(dev, 0x0D, 0x54);
+			rtl8225_write_phy_ofdm(dev, 0x18, 0x32);
+		} else { /* main antenna */
+			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
+			rtl8225_write_phy_cck(dev, 0x11, 0x9B);
+			rtl8225_write_phy_cck(dev, 0x01, 0x47);
+			rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C);
+			rtl8225_write_phy_ofdm(dev, 0x18, 0x32);
+		}
+	}
+	/* priv->curr_ant = def_ant; */
+}
+
+static void rtl8180_int_enable(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		rtl818x_iowrite32(priv, &priv->map->IMR,
+			  IMR_TBDER | IMR_TBDOK |
+			  IMR_TVODER | IMR_TVODOK |
+			  IMR_TVIDER | IMR_TVIDOK |
+			  IMR_TBEDER | IMR_TBEDOK |
+			  IMR_TBKDER | IMR_TBKDOK |
+			  IMR_RDU | IMR_RER |
+			  IMR_ROK | IMR_RQOSOK);
+	} else {
+		rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+	}
+}
+
+static void rtl8180_int_disable(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		rtl818x_iowrite32(priv, &priv->map->IMR, 0);
+	} else {
+		rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+	}
+}
+
+static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev,
+			    u32 basic_mask)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg;
+	u32 resp_mask;
+	u8 basic_max;
+	u8 resp_max, resp_min;
+
+	resp_mask = basic_mask;
+	/* IEEE80211 says the response rate should be equal to the highest basic
+	 * rate that is not faster than received frame. But it says also that if
+	 * the basic rate set does not contains any rate for the current
+	 * modulation class then mandatory rate set must be used for that
+	 * modulation class. Eventually add OFDM mandatory rates..
+	 */
+	if ((resp_mask & 0xf) == resp_mask)
+		resp_mask |= 0x150; /* 6, 12, 24Mbps */
+
+	switch (priv->chip_family) {
+
+	case RTL818X_CHIP_FAMILY_RTL8180:
+		/* in 8180 this is NOT a BITMAP */
+		basic_max = fls(basic_mask) - 1;
+		reg = rtl818x_ioread16(priv, &priv->map->BRSR);
+		reg &= ~3;
+		reg |= basic_max;
+		rtl818x_iowrite16(priv, &priv->map->BRSR, reg);
+		break;
+
+	case RTL818X_CHIP_FAMILY_RTL8185:
+		resp_max = fls(resp_mask) - 1;
+		resp_min = ffs(resp_mask) - 1;
+		/* in 8185 this is a BITMAP */
+		rtl818x_iowrite16(priv, &priv->map->BRSR, basic_mask);
+		rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (resp_max << 4) |
+				resp_min);
+		break;
+
+	case RTL818X_CHIP_FAMILY_RTL8187SE:
+		/* in 8187se this is a BITMAP. BRSR reg actually sets
+		 * response rates.
+		 */
+		rtl818x_iowrite16(priv, &priv->map->BRSR_8187SE, resp_mask);
+		break;
+	}
+}
+
+static void rtl8180_config_cardbus(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg16;
+	u8 reg8;
+
+	reg8 = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	reg8 |= 1 << 1;
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg8);
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		rtl818x_iowrite16(priv, FEMR_SE, 0xffff);
+	} else {
+		reg16 = rtl818x_ioread16(priv, &priv->map->FEMR);
+			reg16 |= (1 << 15) | (1 << 14) | (1 << 4);
+		rtl818x_iowrite16(priv, &priv->map->FEMR, reg16);
+	}
+
+}
+
+static int rtl8180_init_hw(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg;
+	u32 reg32;
+
+	rtl818x_iowrite8(priv, &priv->map->CMD, 0);
+	rtl818x_ioread8(priv, &priv->map->CMD);
+	msleep(10);
+
+	/* reset */
+	rtl8180_int_disable(dev);
+	rtl818x_ioread8(priv, &priv->map->CMD);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg &= (1 << 1);
+	reg |= RTL818X_CMD_RESET;
+	rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET);
+	rtl818x_ioread8(priv, &priv->map->CMD);
+	msleep(200);
+
+	/* check success of reset */
+	if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
+		wiphy_err(dev->wiphy, "reset timeout!\n");
+		return -ETIMEDOUT;
+	}
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
+	rtl818x_ioread8(priv, &priv->map->CMD);
+	msleep(200);
+
+	if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) {
+		rtl8180_config_cardbus(dev);
+	}
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
+	else
+		rtl818x_iowrite8(priv, &priv->map->MSR, 0);
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+		rtl8180_set_anaparam(priv, priv->anaparam);
+
+	rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
+	/* mac80211 queue have higher prio for lower index. The last queue
+	 * (that mac80211 is not aware of) is reserved for beacons (and have
+	 * the highest priority on the NIC)
+	 */
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) {
+		rtl818x_iowrite32(priv, &priv->map->TBDA,
+				  priv->tx_ring[1].dma);
+		rtl818x_iowrite32(priv, &priv->map->TLPDA,
+				  priv->tx_ring[0].dma);
+	} else {
+		rtl818x_iowrite32(priv, &priv->map->TBDA,
+				  priv->tx_ring[4].dma);
+		rtl818x_iowrite32(priv, &priv->map->TVODA,
+				  priv->tx_ring[0].dma);
+		rtl818x_iowrite32(priv, &priv->map->TVIDA,
+				  priv->tx_ring[1].dma);
+		rtl818x_iowrite32(priv, &priv->map->TBEDA,
+				  priv->tx_ring[2].dma);
+		rtl818x_iowrite32(priv, &priv->map->TBKDA,
+				  priv->tx_ring[3].dma);
+	}
+
+	/* TODO: necessary? specs indicate not */
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
+		reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
+		rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
+	}
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	/* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */
+
+	/* TODO: turn off hw wep on rtl8180 */
+
+	rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
+		rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
+		rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0);
+	} else {
+		rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
+
+		rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
+		rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
+	}
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
+		/* TODO: set ClkRun enable? necessary? */
+		reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
+		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
+		rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+		reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+		rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
+		rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+		/* fix eccessive IFS after CTS-to-self */
+		if (priv->map_pio) {
+			u8 reg;
+
+			reg = rtl818x_ioread8(priv, &priv->map->PGSELECT);
+			rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
+			rtl818x_iowrite8(priv, REG_ADDR1(0xff), 0x35);
+			rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		} else
+			rtl818x_iowrite8(priv, REG_ADDR1(0x1ff), 0x35);
+	}
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+
+		/* the set auto rate fallback bitmask from 1M to 54 Mb/s */
+		rtl818x_iowrite16(priv, ARFR, 0xFFF);
+		rtl818x_ioread16(priv, ARFR);
+
+		/* stop unused queus (no dma alloc) */
+		rtl818x_iowrite8(priv, &priv->map->TPPOLL_STOP,
+			       RTL818x_TPPOLL_STOP_MG | RTL818x_TPPOLL_STOP_HI);
+
+		rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0x00);
+		rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
+
+		rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
+
+		/* some black magic here.. */
+		rtl8187se_mac_config(dev);
+
+		rtl818x_iowrite16(priv, RFSW_CTRL, 0x569A);
+		rtl818x_ioread16(priv, RFSW_CTRL);
+
+		rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_ON);
+		rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_ON);
+		rtl8180_set_anaparam3(priv, RTL8225SE_ANAPARAM3);
+
+
+		rtl818x_iowrite8(priv, &priv->map->CONFIG5,
+			    rtl818x_ioread8(priv, &priv->map->CONFIG5) & 0x7F);
+
+		/*probably this switch led on */
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT,
+			    rtl818x_ioread8(priv, &priv->map->PGSELECT) | 0x08);
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1BFF);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
+
+		rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x4003);
+
+		/* the reference code mac hardcode table write
+		 * this reg by doing byte-wide accesses.
+		 * It does it just for lowest and highest byte..
+		 */
+		reg32 = rtl818x_ioread32(priv, &priv->map->RF_PARA);
+		reg32 &= 0x00ffff00;
+		reg32 |= 0xb8000054;
+		rtl818x_iowrite32(priv, &priv->map->RF_PARA, reg32);
+	} else
+		/* stop unused queus (no dma alloc) */
+		rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+			    (1<<1) | (1<<2));
+
+	priv->rf->init(dev);
+
+	/* default basic rates are 1,2 Mbps for rtl8180. 1,2,6,9,12,18,24 Mbps
+	 * otherwise. bitmask 0x3 and 0x01f3 respectively.
+	 * NOTE: currenty rtl8225 RF code changes basic rates, so we need to do
+	 * this after rf init.
+	 * TODO: try to find out whether RF code really needs to do this..
+	 */
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+		rtl8180_conf_basic_rates(dev, 0x3);
+	else
+		rtl8180_conf_basic_rates(dev, 0x1f3);
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		rtl8187se_set_antenna_config(dev,
+					     priv->antenna_diversity_default,
+					     priv->antenna_diversity_en);
+	return 0;
+}
+
+static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl818x_rx_cmd_desc *entry;
+	int i;
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		priv->rx_ring_sz = sizeof(struct rtl8187se_rx_desc);
+	else
+		priv->rx_ring_sz = sizeof(struct rtl8180_rx_desc);
+
+	priv->rx_ring = pci_zalloc_consistent(priv->pdev, priv->rx_ring_sz * 32,
+					      &priv->rx_ring_dma);
+	if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
+		wiphy_err(dev->wiphy, "Cannot allocate RX ring\n");
+		return -ENOMEM;
+	}
+
+	priv->rx_idx = 0;
+
+	for (i = 0; i < 32; i++) {
+		struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
+		dma_addr_t *mapping;
+		entry = priv->rx_ring + priv->rx_ring_sz*i;
+		if (!skb) {
+			pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32,
+					priv->rx_ring, priv->rx_ring_dma);
+			wiphy_err(dev->wiphy, "Cannot allocate RX skb\n");
+			return -ENOMEM;
+		}
+		priv->rx_buf[i] = skb;
+		mapping = (dma_addr_t *)skb->cb;
+		*mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
+					  MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+
+		if (pci_dma_mapping_error(priv->pdev, *mapping)) {
+			kfree_skb(skb);
+			pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32,
+					priv->rx_ring, priv->rx_ring_dma);
+			wiphy_err(dev->wiphy, "Cannot map DMA for RX skb\n");
+			return -ENOMEM;
+		}
+
+		entry->rx_buf = cpu_to_le32(*mapping);
+		entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
+					   MAX_RX_SIZE);
+	}
+	entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
+	return 0;
+}
+
+static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int i;
+
+	for (i = 0; i < 32; i++) {
+		struct sk_buff *skb = priv->rx_buf[i];
+		if (!skb)
+			continue;
+
+		pci_unmap_single(priv->pdev,
+				 *((dma_addr_t *)skb->cb),
+				 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+		kfree_skb(skb);
+	}
+
+	pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32,
+			    priv->rx_ring, priv->rx_ring_dma);
+	priv->rx_ring = NULL;
+}
+
+static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
+				unsigned int prio, unsigned int entries)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_tx_desc *ring;
+	dma_addr_t dma;
+	int i;
+
+	ring = pci_zalloc_consistent(priv->pdev, sizeof(*ring) * entries,
+				     &dma);
+	if (!ring || (unsigned long)ring & 0xFF) {
+		wiphy_err(dev->wiphy, "Cannot allocate TX ring (prio = %d)\n",
+			  prio);
+		return -ENOMEM;
+	}
+
+	priv->tx_ring[prio].desc = ring;
+	priv->tx_ring[prio].dma = dma;
+	priv->tx_ring[prio].idx = 0;
+	priv->tx_ring[prio].entries = entries;
+	skb_queue_head_init(&priv->tx_ring[prio].queue);
+
+	for (i = 0; i < entries; i++)
+		ring[i].next_tx_desc =
+			cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring));
+
+	return 0;
+}
+
+static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
+
+	while (skb_queue_len(&ring->queue)) {
+		struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
+		struct sk_buff *skb = __skb_dequeue(&ring->queue);
+
+		pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
+				 skb->len, PCI_DMA_TODEVICE);
+		kfree_skb(skb);
+		ring->idx = (ring->idx + 1) % ring->entries;
+	}
+
+	pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries,
+			    ring->desc, ring->dma);
+	ring->desc = NULL;
+}
+
+static int rtl8180_start(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int ret, i;
+	u32 reg;
+
+	ret = rtl8180_init_rx_ring(dev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < (dev->queues + 1); i++)
+		if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
+			goto err_free_rings;
+
+	ret = rtl8180_init_hw(dev);
+	if (ret)
+		goto err_free_rings;
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		ret = request_irq(priv->pdev->irq, rtl8187se_interrupt,
+			  IRQF_SHARED, KBUILD_MODNAME, dev);
+	} else {
+		ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
+			  IRQF_SHARED, KBUILD_MODNAME, dev);
+	}
+
+	if (ret) {
+		wiphy_err(dev->wiphy, "failed to register IRQ handler\n");
+		goto err_free_rings;
+	}
+
+	rtl8180_int_enable(dev);
+
+	/* in rtl8187se at MAR regs offset there is the management
+	 * TX descriptor DMA addres..
+	 */
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) {
+		rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
+		rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
+	}
+
+	reg = RTL818X_RX_CONF_ONLYERLPKT |
+	      RTL818X_RX_CONF_RX_AUTORESETPHY |
+	      RTL818X_RX_CONF_MGMT |
+	      RTL818X_RX_CONF_DATA |
+	      (7 << 8 /* MAX RX DMA */) |
+	      RTL818X_RX_CONF_BROADCAST |
+	      RTL818X_RX_CONF_NICMAC;
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185)
+		reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
+	else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
+		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
+			? RTL818X_RX_CONF_CSDM1 : 0;
+		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
+			? RTL818X_RX_CONF_CSDM2 : 0;
+	} else {
+		reg &= ~(RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2);
+	}
+
+	priv->rx_conf = reg;
+	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
+
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
+		reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
+
+		/* CW is not on per-packet basis.
+		 * in rtl8185 the CW_VALUE reg is used.
+		 * in rtl8187se the AC param regs are used.
+		 */
+		reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
+		/* retry limit IS on per-packet basis.
+		 * the short and long retry limit in TX_CONF
+		 * reg are ignored
+		 */
+		reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
+		rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
+
+		reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
+		/* TX antenna and TX gain are not on per-packet basis.
+		 * TX Antenna is selected by ANTSEL reg (RX in BB regs).
+		 * TX gain is selected with CCK_TX_AGC and OFDM_TX_AGC regs
+		 */
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
+		reg |=  RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
+		rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
+
+		/* disable early TX */
+		rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f);
+	}
+
+	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+	reg |= (6 << 21 /* MAX TX DMA */) |
+	       RTL818X_TX_CONF_NO_ICV;
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		reg |= 1<<30;  /*  "duration procedure mode" */
+
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
+		reg &= ~RTL818X_TX_CONF_PROBE_DTS;
+	else
+		reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
+
+	reg &= ~RTL818X_TX_CONF_DISCW;
+
+	/* different meaning, same value on both rtl8185 and rtl8180 */
+	reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
+
+	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg |= RTL818X_CMD_RX_ENABLE;
+	reg |= RTL818X_CMD_TX_ENABLE;
+	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+	return 0;
+
+ err_free_rings:
+	rtl8180_free_rx_ring(dev);
+	for (i = 0; i < (dev->queues + 1); i++)
+		if (priv->tx_ring[i].desc)
+			rtl8180_free_tx_ring(dev, i);
+
+	return ret;
+}
+
+static void rtl8180_stop(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 reg;
+	int i;
+
+	rtl8180_int_disable(dev);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg &= ~RTL818X_CMD_TX_ENABLE;
+	reg &= ~RTL818X_CMD_RX_ENABLE;
+	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+	priv->rf->stop(dev);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	free_irq(priv->pdev->irq, dev);
+
+	rtl8180_free_rx_ring(dev);
+	for (i = 0; i < (dev->queues + 1); i++)
+		rtl8180_free_tx_ring(dev, i);
+}
+
+static u64 rtl8180_get_tsf(struct ieee80211_hw *dev,
+			   struct ieee80211_vif *vif)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
+	       (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
+}
+
+static void rtl8180_beacon_work(struct work_struct *work)
+{
+	struct rtl8180_vif *vif_priv =
+		container_of(work, struct rtl8180_vif, beacon_work.work);
+	struct ieee80211_vif *vif =
+		container_of((void *)vif_priv, struct ieee80211_vif, drv_priv);
+	struct ieee80211_hw *dev = vif_priv->dev;
+	struct ieee80211_mgmt *mgmt;
+	struct sk_buff *skb;
+
+	/* don't overflow the tx ring */
+	if (ieee80211_queue_stopped(dev, 0))
+		goto resched;
+
+	/* grab a fresh beacon */
+	skb = ieee80211_beacon_get(dev, vif);
+	if (!skb)
+		goto resched;
+
+	/*
+	 * update beacon timestamp w/ TSF value
+	 * TODO: make hardware update beacon timestamp
+	 */
+	mgmt = (struct ieee80211_mgmt *)skb->data;
+	mgmt->u.beacon.timestamp = cpu_to_le64(rtl8180_get_tsf(dev, vif));
+
+	/* TODO: use actual beacon queue */
+	skb_set_queue_mapping(skb, 0);
+
+	rtl8180_tx(dev, NULL, skb);
+
+resched:
+	/*
+	 * schedule next beacon
+	 * TODO: use hardware support for beacon timing
+	 */
+	schedule_delayed_work(&vif_priv->beacon_work,
+			usecs_to_jiffies(1024 * vif->bss_conf.beacon_int));
+}
+
+static int rtl8180_add_interface(struct ieee80211_hw *dev,
+				 struct ieee80211_vif *vif)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_vif *vif_priv;
+
+	/*
+	 * We only support one active interface at a time.
+	 */
+	if (priv->vif)
+		return -EBUSY;
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	priv->vif = vif;
+
+	/* Initialize driver private area */
+	vif_priv = (struct rtl8180_vif *)&vif->drv_priv;
+	vif_priv->dev = dev;
+	INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8180_beacon_work);
+	vif_priv->enable_beacon = false;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
+			  le32_to_cpu(*(__le32 *)vif->addr));
+	rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
+			  le16_to_cpu(*(__le16 *)(vif->addr + 4)));
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	return 0;
+}
+
+static void rtl8180_remove_interface(struct ieee80211_hw *dev,
+				     struct ieee80211_vif *vif)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	priv->vif = NULL;
+}
+
+static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct ieee80211_conf *conf = &dev->conf;
+
+	priv->rf->set_chan(dev, conf);
+
+	return 0;
+}
+
+static void rtl8187se_conf_ac_parm(struct ieee80211_hw *dev, u8 queue)
+{
+	const struct ieee80211_tx_queue_params *params;
+	struct rtl8180_priv *priv = dev->priv;
+
+	/* hw value */
+	u32 ac_param;
+
+	u8 aifs;
+	u8 txop;
+	u8 cw_min, cw_max;
+
+	params = &priv->queue_param[queue];
+
+	cw_min = fls(params->cw_min);
+	cw_max = fls(params->cw_max);
+
+	aifs = 10 + params->aifs * priv->slot_time;
+
+	/* TODO: check if txop HW is in us (mult by 32) */
+	txop = params->txop;
+
+	ac_param = txop << AC_PARAM_TXOP_LIMIT_SHIFT |
+		cw_max << AC_PARAM_ECW_MAX_SHIFT |
+		cw_min << AC_PARAM_ECW_MIN_SHIFT |
+		aifs << AC_PARAM_AIFS_SHIFT;
+
+	switch (queue) {
+	case IEEE80211_AC_BK:
+		rtl818x_iowrite32(priv, &priv->map->AC_BK_PARAM, ac_param);
+		break;
+	case IEEE80211_AC_BE:
+		rtl818x_iowrite32(priv, &priv->map->AC_BE_PARAM, ac_param);
+		break;
+	case IEEE80211_AC_VI:
+		rtl818x_iowrite32(priv, &priv->map->AC_VI_PARAM, ac_param);
+		break;
+	case IEEE80211_AC_VO:
+		rtl818x_iowrite32(priv, &priv->map->AC_VO_PARAM, ac_param);
+		break;
+	}
+}
+
+static int rtl8180_conf_tx(struct ieee80211_hw *dev,
+			    struct ieee80211_vif *vif, u16 queue,
+			    const struct ieee80211_tx_queue_params *params)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 cw_min, cw_max;
+
+	/* nothing to do ? */
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+		return 0;
+
+	cw_min = fls(params->cw_min);
+	cw_max = fls(params->cw_max);
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		priv->queue_param[queue] = *params;
+		rtl8187se_conf_ac_parm(dev, queue);
+	} else
+		rtl818x_iowrite8(priv, &priv->map->CW_VAL,
+				 (cw_max << 4) | cw_min);
+	return 0;
+}
+
+static void rtl8180_conf_erp(struct ieee80211_hw *dev,
+			    struct ieee80211_bss_conf *info)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 sifs, difs;
+	int eifs;
+	u8 hw_eifs;
+
+	/* TODO: should we do something ? */
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+		return;
+
+	/* I _hope_ this means 10uS for the HW.
+	 * In reference code it is 0x22 for
+	 * both rtl8187L and rtl8187SE
+	 */
+	sifs = 0x22;
+
+	if (info->use_short_slot)
+		priv->slot_time = 9;
+	else
+		priv->slot_time = 20;
+
+	/* 10 is SIFS time in uS */
+	difs = 10 + 2 * priv->slot_time;
+	eifs = 10 + difs + priv->ack_time;
+
+	/* HW should use 4uS units for EIFS (I'm sure for rtl8185)*/
+	hw_eifs = DIV_ROUND_UP(eifs, 4);
+
+
+	rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time);
+	rtl818x_iowrite8(priv, &priv->map->SIFS, sifs);
+	rtl818x_iowrite8(priv, &priv->map->DIFS, difs);
+
+	/* from reference code. set ack timeout reg = eifs reg */
+	rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, hw_eifs);
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		rtl818x_iowrite8(priv, &priv->map->EIFS_8187SE, hw_eifs);
+	else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
+		/* rtl8187/rtl8185 HW bug. After EIFS is elapsed,
+		 * the HW still wait for DIFS.
+		 * HW uses 4uS units for EIFS.
+		 */
+		hw_eifs = DIV_ROUND_UP(eifs - difs, 4);
+
+		rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs);
+	}
+}
+
+static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_bss_conf *info,
+				     u32 changed)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_vif *vif_priv;
+	int i;
+	u8 reg;
+
+	vif_priv = (struct rtl8180_vif *)&vif->drv_priv;
+
+	if (changed & BSS_CHANGED_BSSID) {
+		rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->BSSID[0],
+				  le16_to_cpu(*(__le16 *)info->bssid));
+		rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->BSSID[2],
+				  le32_to_cpu(*(__le32 *)(info->bssid + 2)));
+
+		if (is_valid_ether_addr(info->bssid)) {
+			if (vif->type == NL80211_IFTYPE_ADHOC)
+				reg = RTL818X_MSR_ADHOC;
+			else
+				reg = RTL818X_MSR_INFRA;
+		} else
+			reg = RTL818X_MSR_NO_LINK;
+
+		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+			reg |= RTL818X_MSR_ENEDCA;
+
+		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
+	}
+
+	if (changed & BSS_CHANGED_BASIC_RATES)
+		rtl8180_conf_basic_rates(dev, info->basic_rates);
+
+	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) {
+
+		/* when preamble changes, acktime duration changes, and erp must
+		 * be recalculated. ACK time is calculated at lowest rate.
+		 * Since mac80211 include SIFS time we remove it (-10)
+		 */
+		priv->ack_time =
+			le16_to_cpu(ieee80211_generic_frame_duration(dev,
+					priv->vif,
+					NL80211_BAND_2GHZ, 10,
+					&priv->rates[0])) - 10;
+
+		rtl8180_conf_erp(dev, info);
+
+		/* mac80211 supplies aifs_n to driver and calls
+		 * conf_tx callback whether aifs_n changes, NOT
+		 * when aifs changes.
+		 * Aifs should be recalculated if slot changes.
+		 */
+		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+			for (i = 0; i < 4; i++)
+				rtl8187se_conf_ac_parm(dev, i);
+		}
+	}
+
+	if (changed & BSS_CHANGED_BEACON_ENABLED)
+		vif_priv->enable_beacon = info->enable_beacon;
+
+	if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) {
+		cancel_delayed_work_sync(&vif_priv->beacon_work);
+		if (vif_priv->enable_beacon)
+			schedule_work(&vif_priv->beacon_work.work);
+	}
+}
+
+static u64 rtl8180_prepare_multicast(struct ieee80211_hw *dev,
+				     struct netdev_hw_addr_list *mc_list)
+{
+	return netdev_hw_addr_list_count(mc_list);
+}
+
+static void rtl8180_configure_filter(struct ieee80211_hw *dev,
+				     unsigned int changed_flags,
+				     unsigned int *total_flags,
+				     u64 multicast)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	if (changed_flags & FIF_FCSFAIL)
+		priv->rx_conf ^= RTL818X_RX_CONF_FCS;
+	if (changed_flags & FIF_CONTROL)
+		priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
+	if (changed_flags & FIF_OTHER_BSS)
+		priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
+	if (*total_flags & FIF_ALLMULTI || multicast > 0)
+		priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
+	else
+		priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
+
+	*total_flags = 0;
+
+	if (priv->rx_conf & RTL818X_RX_CONF_FCS)
+		*total_flags |= FIF_FCSFAIL;
+	if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
+		*total_flags |= FIF_CONTROL;
+	if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
+		*total_flags |= FIF_OTHER_BSS;
+	if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
+		*total_flags |= FIF_ALLMULTI;
+
+	rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
+}
+
+static const struct ieee80211_ops rtl8180_ops = {
+	.tx			= rtl8180_tx,
+	.start			= rtl8180_start,
+	.stop			= rtl8180_stop,
+	.add_interface		= rtl8180_add_interface,
+	.remove_interface	= rtl8180_remove_interface,
+	.config			= rtl8180_config,
+	.bss_info_changed	= rtl8180_bss_info_changed,
+	.conf_tx		= rtl8180_conf_tx,
+	.prepare_multicast	= rtl8180_prepare_multicast,
+	.configure_filter	= rtl8180_configure_filter,
+	.get_tsf		= rtl8180_get_tsf,
+};
+
+static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
+{
+	struct rtl8180_priv *priv = eeprom->data;
+	u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+
+	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
+	eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
+	eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
+	eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
+}
+
+static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
+{
+	struct rtl8180_priv *priv = eeprom->data;
+	u8 reg = 2 << 6;
+
+	if (eeprom->reg_data_in)
+		reg |= RTL818X_EEPROM_CMD_WRITE;
+	if (eeprom->reg_data_out)
+		reg |= RTL818X_EEPROM_CMD_READ;
+	if (eeprom->reg_data_clock)
+		reg |= RTL818X_EEPROM_CMD_CK;
+	if (eeprom->reg_chip_select)
+		reg |= RTL818X_EEPROM_CMD_CS;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+}
+
+static void rtl8180_eeprom_read(struct rtl8180_priv *priv)
+{
+	struct eeprom_93cx6 eeprom;
+	int eeprom_cck_table_adr;
+	u16 eeprom_val;
+	int i;
+
+	eeprom.data = priv;
+	eeprom.register_read = rtl8180_eeprom_register_read;
+	eeprom.register_write = rtl8180_eeprom_register_write;
+	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
+		eeprom.width = PCI_EEPROM_WIDTH_93C66;
+	else
+		eeprom.width = PCI_EEPROM_WIDTH_93C46;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			RTL818X_EEPROM_CMD_PROGRAM);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+
+	eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
+	eeprom_val &= 0xFF;
+	priv->rf_type = eeprom_val;
+
+	eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
+	priv->csthreshold = eeprom_val >> 8;
+
+	eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)priv->mac_addr, 3);
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		eeprom_cck_table_adr = 0x30;
+	else
+		eeprom_cck_table_adr = 0x10;
+
+	/* CCK TX power */
+	for (i = 0; i < 14; i += 2) {
+		u16 txpwr;
+		eeprom_93cx6_read(&eeprom, eeprom_cck_table_adr + (i >> 1),
+				&txpwr);
+		priv->channels[i].hw_value = txpwr & 0xFF;
+		priv->channels[i + 1].hw_value = txpwr >> 8;
+	}
+
+	/* OFDM TX power */
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
+		for (i = 0; i < 14; i += 2) {
+			u16 txpwr;
+			eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
+			priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
+			priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
+		}
+	}
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
+		__le32 anaparam;
+		eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
+		priv->anaparam = le32_to_cpu(anaparam);
+		eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
+	}
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+		eeprom_93cx6_read(&eeprom, 0x3F, &eeprom_val);
+		priv->antenna_diversity_en = !!(eeprom_val & 0x100);
+		priv->antenna_diversity_default = (eeprom_val & 0xC00) == 0x400;
+
+		eeprom_93cx6_read(&eeprom, 0x7C, &eeprom_val);
+		priv->xtal_out = eeprom_val & 0xF;
+		priv->xtal_in = (eeprom_val & 0xF0) >> 4;
+		priv->xtal_cal = !!(eeprom_val & 0x1000);
+		priv->thermal_meter_val = (eeprom_val & 0xF00) >> 8;
+		priv->thermal_meter_en = !!(eeprom_val & 0x2000);
+	}
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			RTL818X_EEPROM_CMD_NORMAL);
+}
+
+static int rtl8180_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *id)
+{
+	struct ieee80211_hw *dev;
+	struct rtl8180_priv *priv;
+	unsigned long mem_addr, mem_len;
+	unsigned int io_addr, io_len;
+	int err;
+	const char *chip_name, *rf_name = NULL;
+	u32 reg;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
+		       pci_name(pdev));
+		return err;
+	}
+
+	err = pci_request_regions(pdev, KBUILD_MODNAME);
+	if (err) {
+		printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
+		       pci_name(pdev));
+		goto err_disable_dev;
+	}
+
+	io_addr = pci_resource_start(pdev, 0);
+	io_len = pci_resource_len(pdev, 0);
+	mem_addr = pci_resource_start(pdev, 1);
+	mem_len = pci_resource_len(pdev, 1);
+
+	if (mem_len < sizeof(struct rtl818x_csr) ||
+	    io_len < sizeof(struct rtl818x_csr)) {
+		printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
+		       pci_name(pdev));
+		err = -ENOMEM;
+		goto err_free_reg;
+	}
+
+	if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) ||
+	    (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) {
+		printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
+		       pci_name(pdev));
+		goto err_free_reg;
+	}
+
+	pci_set_master(pdev);
+
+	dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops);
+	if (!dev) {
+		printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
+		       pci_name(pdev));
+		err = -ENOMEM;
+		goto err_free_reg;
+	}
+
+	priv = dev->priv;
+	priv->pdev = pdev;
+
+	dev->max_rates = 1;
+	SET_IEEE80211_DEV(dev, &pdev->dev);
+	pci_set_drvdata(pdev, dev);
+
+	priv->map_pio = false;
+	priv->map = pci_iomap(pdev, 1, mem_len);
+	if (!priv->map) {
+		priv->map = pci_iomap(pdev, 0, io_len);
+		priv->map_pio = true;
+	}
+
+	if (!priv->map) {
+		dev_err(&pdev->dev, "Cannot map device memory/PIO\n");
+		err = -ENOMEM;
+		goto err_free_dev;
+	}
+
+	BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
+	BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
+
+	memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
+	memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
+
+	priv->band.band = NL80211_BAND_2GHZ;
+	priv->band.channels = priv->channels;
+	priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
+	priv->band.bitrates = priv->rates;
+	priv->band.n_bitrates = 4;
+	dev->wiphy->bands[NL80211_BAND_2GHZ] = &priv->band;
+
+	ieee80211_hw_set(dev, HOST_BROADCAST_PS_BUFFERING);
+	ieee80211_hw_set(dev, RX_INCLUDES_FCS);
+
+	dev->vif_data_size = sizeof(struct rtl8180_vif);
+	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+					BIT(NL80211_IFTYPE_ADHOC);
+	dev->max_signal = 65;
+
+	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+	reg &= RTL818X_TX_CONF_HWVER_MASK;
+	switch (reg) {
+	case RTL818X_TX_CONF_R8180_ABCD:
+		chip_name = "RTL8180";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180;
+		break;
+
+	case RTL818X_TX_CONF_R8180_F:
+		chip_name = "RTL8180vF";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180;
+		break;
+
+	case RTL818X_TX_CONF_R8185_ABC:
+		chip_name = "RTL8185";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
+		break;
+
+	case RTL818X_TX_CONF_R8185_D:
+		chip_name = "RTL8185vD";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
+		break;
+
+	case RTL818X_TX_CONF_RTL8187SE:
+		chip_name = "RTL8187SE";
+		if (priv->map_pio) {
+			dev_err(&pdev->dev,
+				"MMIO failed. PIO not supported on RTL8187SE\n");
+			err = -ENOMEM;
+			goto err_iounmap;
+		}
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8187SE;
+		break;
+
+	default:
+		printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
+		       pci_name(pdev), reg >> 25);
+		err = -ENODEV;
+		goto err_iounmap;
+	}
+
+	/* we declare to MAC80211 all the queues except for beacon queue
+	 * that will be eventually handled by DRV.
+	 * TX rings are arranged in such a way that lower is the IDX,
+	 * higher is the priority, in order to achieve direct mapping
+	 * with mac80211, however the beacon queue is an exception and it
+	 * is mapped on the highst tx ring IDX.
+	 */
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		dev->queues = RTL8187SE_NR_TX_QUEUES - 1;
+	else
+		dev->queues = RTL8180_NR_TX_QUEUES - 1;
+
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
+		priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
+		pci_try_set_mwi(pdev);
+	}
+
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
+		ieee80211_hw_set(dev, SIGNAL_DBM);
+	else
+		ieee80211_hw_set(dev, SIGNAL_UNSPEC);
+
+	wiphy_ext_feature_set(dev->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+
+	rtl8180_eeprom_read(priv);
+
+	switch (priv->rf_type) {
+	case 1:	rf_name = "Intersil";
+		break;
+	case 2:	rf_name = "RFMD";
+		break;
+	case 3:	priv->rf = &sa2400_rf_ops;
+		break;
+	case 4:	priv->rf = &max2820_rf_ops;
+		break;
+	case 5:	priv->rf = &grf5101_rf_ops;
+		break;
+	case 9:
+		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+			priv->rf = rtl8187se_detect_rf(dev);
+		else
+			priv->rf = rtl8180_detect_rf(dev);
+		break;
+	case 10:
+		rf_name = "RTL8255";
+		break;
+	default:
+		printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
+		       pci_name(pdev), priv->rf_type);
+		err = -ENODEV;
+		goto err_iounmap;
+	}
+
+	if (!priv->rf) {
+		printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
+		       pci_name(pdev), rf_name);
+		err = -ENODEV;
+		goto err_iounmap;
+	}
+
+	if (!is_valid_ether_addr(priv->mac_addr)) {
+		printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
+		       " randomly generated MAC addr\n", pci_name(pdev));
+		eth_random_addr(priv->mac_addr);
+	}
+	SET_IEEE80211_PERM_ADDR(dev, priv->mac_addr);
+
+	spin_lock_init(&priv->lock);
+
+	err = ieee80211_register_hw(dev);
+	if (err) {
+		printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
+		       pci_name(pdev));
+		goto err_iounmap;
+	}
+
+	wiphy_info(dev->wiphy, "hwaddr %pm, %s + %s\n",
+		   priv->mac_addr, chip_name, priv->rf->name);
+
+	return 0;
+
+ err_iounmap:
+	pci_iounmap(pdev, priv->map);
+
+ err_free_dev:
+	ieee80211_free_hw(dev);
+
+ err_free_reg:
+	pci_release_regions(pdev);
+
+ err_disable_dev:
+	pci_disable_device(pdev);
+	return err;
+}
+
+static void rtl8180_remove(struct pci_dev *pdev)
+{
+	struct ieee80211_hw *dev = pci_get_drvdata(pdev);
+	struct rtl8180_priv *priv;
+
+	if (!dev)
+		return;
+
+	ieee80211_unregister_hw(dev);
+
+	priv = dev->priv;
+
+	pci_iounmap(pdev, priv->map);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	ieee80211_free_hw(dev);
+}
+
+#ifdef CONFIG_PM
+static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	pci_save_state(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return 0;
+}
+
+static int rtl8180_resume(struct pci_dev *pdev)
+{
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver rtl8180_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= rtl8180_table,
+	.probe		= rtl8180_probe,
+	.remove		= rtl8180_remove,
+#ifdef CONFIG_PM
+	.suspend	= rtl8180_suspend,
+	.resume		= rtl8180_resume,
+#endif /* CONFIG_PM */
+};
+
+module_pci_driver(rtl8180_driver);
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.c
new file mode 100644
index 000000000..b1bfee738
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.c
@@ -0,0 +1,190 @@
+
+/*
+ * Radio tuning for GCT GRF5101 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "grf5101.h"
+
+static const int grf5101_encode[] = {
+	0x0, 0x8, 0x4, 0xC,
+	0x2, 0xA, 0x6, 0xE,
+	0x1, 0x9, 0x5, 0xD,
+	0x3, 0xB, 0x7, 0xF
+};
+
+static void write_grf5101(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 phy_config;
+
+	phy_config =  grf5101_encode[(data >> 8) & 0xF];
+	phy_config |= grf5101_encode[(data >> 4) & 0xF] << 4;
+	phy_config |= grf5101_encode[data & 0xF] << 8;
+	phy_config |= grf5101_encode[(addr >> 1) & 0xF] << 12;
+	phy_config |= (addr & 1) << 16;
+	phy_config |= grf5101_encode[(data & 0xf000) >> 12] << 24;
+
+	/* MAC will bang bits to the chip */
+	phy_config |= 0x90000000;
+
+	rtl818x_iowrite32(priv,
+		(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
+
+	msleep(3);
+}
+
+static void grf5101_write_phy_antenna(struct ieee80211_hw *dev, short chan)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 ant = GRF5101_ANTENNA;
+
+	if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
+		ant |= BB_ANTENNA_B;
+
+	if (chan == 14)
+		ant |= BB_ANTATTEN_CHAN14;
+
+	rtl8180_write_phy(dev, 0x10, ant);
+}
+
+static u8 grf5101_rf_calc_rssi(u8 agc, u8 sq)
+{
+	if (agc > 60)
+		return 65;
+
+	/* TODO(?): just return agc (or agc + 5) to avoid mult / div */
+	return 65 * agc / 60;
+}
+
+static void grf5101_rf_set_channel(struct ieee80211_hw *dev,
+				   struct ieee80211_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int channel =
+		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
+	u32 txpw = priv->channels[channel - 1].hw_value & 0xFF;
+	u32 chan = channel - 1;
+
+	/* set TX power */
+	write_grf5101(dev, 0x15, 0x0);
+	write_grf5101(dev, 0x06, txpw);
+	write_grf5101(dev, 0x15, 0x10);
+	write_grf5101(dev, 0x15, 0x0);
+
+	/* set frequency */
+	write_grf5101(dev, 0x07, 0x0);
+	write_grf5101(dev, 0x0B, chan);
+	write_grf5101(dev, 0x07, 0x1000);
+
+	grf5101_write_phy_antenna(dev, channel);
+}
+
+static void grf5101_rf_stop(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 anaparam;
+
+	anaparam = priv->anaparam;
+	anaparam &= 0x000fffff;
+	anaparam |= 0x3f900000;
+	rtl8180_set_anaparam(priv, anaparam);
+
+	write_grf5101(dev, 0x07, 0x0);
+	write_grf5101(dev, 0x1f, 0x45);
+	write_grf5101(dev, 0x1f, 0x5);
+	write_grf5101(dev, 0x00, 0x8e4);
+}
+
+static void grf5101_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	rtl8180_set_anaparam(priv, priv->anaparam);
+
+	write_grf5101(dev, 0x1f, 0x0);
+	write_grf5101(dev, 0x1f, 0x0);
+	write_grf5101(dev, 0x1f, 0x40);
+	write_grf5101(dev, 0x1f, 0x60);
+	write_grf5101(dev, 0x1f, 0x61);
+	write_grf5101(dev, 0x1f, 0x61);
+	write_grf5101(dev, 0x00, 0xae4);
+	write_grf5101(dev, 0x1f, 0x1);
+	write_grf5101(dev, 0x1f, 0x41);
+	write_grf5101(dev, 0x1f, 0x61);
+
+	write_grf5101(dev, 0x01, 0x1a23);
+	write_grf5101(dev, 0x02, 0x4971);
+	write_grf5101(dev, 0x03, 0x41de);
+	write_grf5101(dev, 0x04, 0x2d80);
+	write_grf5101(dev, 0x05, 0x68ff);	/* 0x61ff original value */
+	write_grf5101(dev, 0x06, 0x0);
+	write_grf5101(dev, 0x07, 0x0);
+	write_grf5101(dev, 0x08, 0x7533);
+	write_grf5101(dev, 0x09, 0xc401);
+	write_grf5101(dev, 0x0a, 0x0);
+	write_grf5101(dev, 0x0c, 0x1c7);
+	write_grf5101(dev, 0x0d, 0x29d3);
+	write_grf5101(dev, 0x0e, 0x2e8);
+	write_grf5101(dev, 0x10, 0x192);
+	write_grf5101(dev, 0x11, 0x248);
+	write_grf5101(dev, 0x12, 0x0);
+	write_grf5101(dev, 0x13, 0x20c4);
+	write_grf5101(dev, 0x14, 0xf4fc);
+	write_grf5101(dev, 0x15, 0x0);
+	write_grf5101(dev, 0x16, 0x1500);
+
+	write_grf5101(dev, 0x07, 0x1000);
+
+	/* baseband configuration */
+	rtl8180_write_phy(dev, 0, 0xa8);
+	rtl8180_write_phy(dev, 3, 0x0);
+	rtl8180_write_phy(dev, 4, 0xc0);
+	rtl8180_write_phy(dev, 5, 0x90);
+	rtl8180_write_phy(dev, 6, 0x1e);
+	rtl8180_write_phy(dev, 7, 0x64);
+
+	grf5101_write_phy_antenna(dev, 1);
+
+	rtl8180_write_phy(dev, 0x11, 0x88);
+
+	if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
+	    RTL818X_CONFIG2_ANTENNA_DIV)
+		rtl8180_write_phy(dev, 0x12, 0xc0); /* enable ant diversity */
+	else
+		rtl8180_write_phy(dev, 0x12, 0x40); /* disable ant diversity */
+
+	rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold);
+
+	rtl8180_write_phy(dev, 0x19, 0x0);
+	rtl8180_write_phy(dev, 0x1a, 0xa0);
+	rtl8180_write_phy(dev, 0x1b, 0x44);
+}
+
+const struct rtl818x_rf_ops grf5101_rf_ops = {
+	.name		= "GCT",
+	.init		= grf5101_rf_init,
+	.stop		= grf5101_rf_stop,
+	.set_chan	= grf5101_rf_set_channel,
+	.calc_rssi	= grf5101_rf_calc_rssi,
+};
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.h
new file mode 100644
index 000000000..4d80a2785
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.h
@@ -0,0 +1,28 @@
+#ifndef RTL8180_GRF5101_H
+#define RTL8180_GRF5101_H
+
+/*
+ * Radio tuning for GCT GRF5101 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define GRF5101_ANTENNA 0xA3
+
+extern const struct rtl818x_rf_ops grf5101_rf_ops;
+
+#endif /* RTL8180_GRF5101_H */
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.c
new file mode 100644
index 000000000..eebf23976
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.c
@@ -0,0 +1,168 @@
+/*
+ * Radio tuning for Maxim max2820 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "max2820.h"
+
+static const u32 max2820_chan[] = {
+	12, /* CH 1 */
+	17,
+	22,
+	27,
+	32,
+	37,
+	42,
+	47,
+	52,
+	57,
+	62,
+	67,
+	72,
+	84, /* CH 14 */
+};
+
+static void write_max2820(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 phy_config;
+
+	phy_config = 0x90 + (data & 0xf);
+	phy_config <<= 16;
+	phy_config += addr;
+	phy_config <<= 8;
+	phy_config += (data >> 4) & 0xff;
+
+	rtl818x_iowrite32(priv,
+		(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
+
+	msleep(1);
+}
+
+static void max2820_write_phy_antenna(struct ieee80211_hw *dev, short chan)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 ant;
+
+	ant = MAXIM_ANTENNA;
+	if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
+		ant |= BB_ANTENNA_B;
+	if (chan == 14)
+		ant |= BB_ANTATTEN_CHAN14;
+
+	rtl8180_write_phy(dev, 0x10, ant);
+}
+
+static u8 max2820_rf_calc_rssi(u8 agc, u8 sq)
+{
+	bool odd;
+
+	odd = !!(agc & 1);
+
+	agc >>= 1;
+	if (odd)
+		agc += 76;
+	else
+		agc += 66;
+
+	/* TODO: change addends above to avoid mult / div below */
+	return 65 * agc / 100;
+}
+
+static void max2820_rf_set_channel(struct ieee80211_hw *dev,
+				   struct ieee80211_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int channel = conf ?
+		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq) : 1;
+	unsigned int chan_idx = channel - 1;
+	u32 txpw = priv->channels[chan_idx].hw_value & 0xFF;
+	u32 chan = max2820_chan[chan_idx];
+
+	/* While philips SA2400 drive the PA bias from
+	 * sa2400, for MAXIM we do this directly from BB */
+	rtl8180_write_phy(dev, 3, txpw);
+
+	max2820_write_phy_antenna(dev, channel);
+	write_max2820(dev, 3, chan);
+}
+
+static void max2820_rf_stop(struct ieee80211_hw *dev)
+{
+	rtl8180_write_phy(dev, 3, 0x8);
+	write_max2820(dev, 1, 0);
+}
+
+
+static void max2820_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	/* MAXIM from netbsd driver */
+	write_max2820(dev, 0, 0x007); /* test mode as indicated in datasheet */
+	write_max2820(dev, 1, 0x01e); /* enable register */
+	write_max2820(dev, 2, 0x001); /* synt register */
+
+	max2820_rf_set_channel(dev, NULL);
+
+	write_max2820(dev, 4, 0x313); /* rx register */
+
+	/* PA is driven directly by the BB, we keep the MAXIM bias
+	 * at the highest value in case that setting it to lower
+	 * values may introduce some further attenuation somewhere..
+	 */
+	write_max2820(dev, 5, 0x00f);
+
+	/* baseband configuration */
+	rtl8180_write_phy(dev, 0, 0x88); /* sys1       */
+	rtl8180_write_phy(dev, 3, 0x08); /* txagc      */
+	rtl8180_write_phy(dev, 4, 0xf8); /* lnadet     */
+	rtl8180_write_phy(dev, 5, 0x90); /* ifagcinit  */
+	rtl8180_write_phy(dev, 6, 0x1a); /* ifagclimit */
+	rtl8180_write_phy(dev, 7, 0x64); /* ifagcdet   */
+
+	max2820_write_phy_antenna(dev, 1);
+
+	rtl8180_write_phy(dev, 0x11, 0x88); /* trl */
+
+	if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
+	    RTL818X_CONFIG2_ANTENNA_DIV)
+		rtl8180_write_phy(dev, 0x12, 0xc7);
+	else
+		rtl8180_write_phy(dev, 0x12, 0x47);
+
+	rtl8180_write_phy(dev, 0x13, 0x9b);
+
+	rtl8180_write_phy(dev, 0x19, 0x0);  /* CHESTLIM */
+	rtl8180_write_phy(dev, 0x1a, 0x9f); /* CHSQLIM  */
+
+	max2820_rf_set_channel(dev, NULL);
+}
+
+const struct rtl818x_rf_ops max2820_rf_ops = {
+	.name		= "Maxim",
+	.init		= max2820_rf_init,
+	.stop		= max2820_rf_stop,
+	.set_chan	= max2820_rf_set_channel,
+	.calc_rssi	= max2820_rf_calc_rssi,
+};
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.h
new file mode 100644
index 000000000..8e982b72b
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.h
@@ -0,0 +1,28 @@
+#ifndef RTL8180_MAX2820_H
+#define RTL8180_MAX2820_H
+
+/*
+ * Radio tuning for Maxim max2820 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define MAXIM_ANTENNA 0xb3
+
+extern const struct rtl818x_rf_ops max2820_rf_ops;
+
+#endif /* RTL8180_MAX2820_H */
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8180.h
new file mode 100644
index 000000000..7948a2da1
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8180.h
@@ -0,0 +1,186 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef RTL8180_H
+#define RTL8180_H
+
+#include "rtl818x.h"
+
+#define MAX_RX_SIZE IEEE80211_MAX_RTS_THRESHOLD
+
+#define RF_PARAM_ANALOGPHY	(1 << 0)
+#define RF_PARAM_ANTBDEFAULT	(1 << 1)
+#define RF_PARAM_CARRIERSENSE1	(1 << 2)
+#define RF_PARAM_CARRIERSENSE2	(1 << 3)
+
+#define BB_ANTATTEN_CHAN14	0x0C
+#define BB_ANTENNA_B 		0x40
+
+#define BB_HOST_BANG 		(1 << 30)
+#define BB_HOST_BANG_EN 	(1 << 2)
+#define BB_HOST_BANG_CLK 	(1 << 1)
+#define BB_HOST_BANG_DATA	1
+
+#define ANAPARAM_TXDACOFF_SHIFT	27
+#define ANAPARAM_PWR0_SHIFT	28
+#define ANAPARAM_PWR0_MASK 	(0x07 << ANAPARAM_PWR0_SHIFT)
+#define ANAPARAM_PWR1_SHIFT	20
+#define ANAPARAM_PWR1_MASK	(0x7F << ANAPARAM_PWR1_SHIFT)
+
+/* rtl8180/rtl8185 have 3 queue + beacon queue.
+ * mac80211 can use just one, + beacon = 2 tot.
+ */
+#define RTL8180_NR_TX_QUEUES 2
+
+/* rtl8187SE have 6 queues + beacon queues
+ * mac80211 can use 4 QoS data queue, + beacon = 5 tot
+ */
+#define RTL8187SE_NR_TX_QUEUES 5
+
+/* for array static allocation, it is the max of above */
+#define RTL818X_NR_TX_QUEUES 5
+
+struct rtl8180_tx_desc {
+	__le32 flags;
+	__le16 rts_duration;
+	__le16 plcp_len;
+	__le32 tx_buf;
+	union{
+		__le32 frame_len;
+		struct {
+			__le16 frame_len_se;
+			__le16 frame_duration;
+		} __packed;
+	} __packed;
+	__le32 next_tx_desc;
+	u8 cw;
+	u8 retry_limit;
+	u8 agc;
+	u8 flags2;
+	/* rsvd for 8180/8185.
+	 * valid for 8187se but we dont use it
+	 */
+	u32 reserved;
+	/* all rsvd for 8180/8185 */
+	__le16 flags3;
+	__le16 frag_qsize;
+} __packed;
+
+struct rtl818x_rx_cmd_desc {
+	__le32 flags;
+	u32 reserved;
+	__le32 rx_buf;
+} __packed;
+
+struct rtl8180_rx_desc {
+	__le32 flags;
+	__le32 flags2;
+	__le64 tsft;
+
+} __packed;
+
+struct rtl8187se_rx_desc {
+	__le32 flags;
+	__le64 tsft;
+	__le32 flags2;
+	__le32 flags3;
+	u32 reserved[3];
+} __packed;
+
+struct rtl8180_tx_ring {
+	struct rtl8180_tx_desc *desc;
+	dma_addr_t dma;
+	unsigned int idx;
+	unsigned int entries;
+	struct sk_buff_head queue;
+};
+
+struct rtl8180_vif {
+	struct ieee80211_hw *dev;
+
+	/* beaconing */
+	struct delayed_work beacon_work;
+	bool enable_beacon;
+};
+
+struct rtl8180_priv {
+	/* common between rtl818x drivers */
+	struct rtl818x_csr __iomem *map;
+	const struct rtl818x_rf_ops *rf;
+	struct ieee80211_vif *vif;
+
+	/* rtl8180 driver specific */
+	bool map_pio;
+	spinlock_t lock;
+	void *rx_ring;
+	u8 rx_ring_sz;
+	dma_addr_t rx_ring_dma;
+	unsigned int rx_idx;
+	struct sk_buff *rx_buf[32];
+	struct rtl8180_tx_ring tx_ring[RTL818X_NR_TX_QUEUES];
+	struct ieee80211_channel channels[14];
+	struct ieee80211_rate rates[12];
+	struct ieee80211_supported_band band;
+	struct ieee80211_tx_queue_params queue_param[4];
+	struct pci_dev *pdev;
+	u32 rx_conf;
+	u8 slot_time;
+	u16 ack_time;
+
+	enum {
+		RTL818X_CHIP_FAMILY_RTL8180,
+		RTL818X_CHIP_FAMILY_RTL8185,
+		RTL818X_CHIP_FAMILY_RTL8187SE,
+	} chip_family;
+	u32 anaparam;
+	u16 rfparam;
+	u8 csthreshold;
+	u8 mac_addr[ETH_ALEN];
+	u8 rf_type;
+	u8 xtal_out;
+	u8 xtal_in;
+	u8 xtal_cal;
+	u8 thermal_meter_val;
+	u8 thermal_meter_en;
+	u8 antenna_diversity_en;
+	u8 antenna_diversity_default;
+	/* sequence # */
+	u16 seqno;
+};
+
+void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
+void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam);
+void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2);
+
+static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, u8 __iomem *addr)
+{
+	return ioread8(addr);
+}
+
+static inline u16 rtl818x_ioread16(struct rtl8180_priv *priv, __le16 __iomem *addr)
+{
+	return ioread16(addr);
+}
+
+static inline u32 rtl818x_ioread32(struct rtl8180_priv *priv, __le32 __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+static inline void rtl818x_iowrite8(struct rtl8180_priv *priv,
+				    u8 __iomem *addr, u8 val)
+{
+	iowrite8(val, addr);
+}
+
+static inline void rtl818x_iowrite16(struct rtl8180_priv *priv,
+				     __le16 __iomem *addr, u16 val)
+{
+	iowrite16(val, addr);
+}
+
+static inline void rtl818x_iowrite32(struct rtl8180_priv *priv,
+				     __le32 __iomem *addr, u32 val)
+{
+	iowrite32(val, addr);
+}
+
+#endif /* RTL8180_H */
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.c
new file mode 100644
index 000000000..9bda5bc78
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.c
@@ -0,0 +1,770 @@
+
+/*
+ * Radio tuning for RTL8225 on RTL8180
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8180 driver, which is:
+ * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "rtl8225.h"
+
+static void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg80, reg84, reg82;
+	u32 bangdata;
+	int i;
+
+	bangdata = (data << 4) | (addr & 0xf);
+
+	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3;
+	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7);
+
+	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7 | 0x400);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+
+	for (i = 15; i >= 0; i--) {
+		u16 reg = reg80;
+
+		if (bangdata & (1 << i))
+			reg |= 1;
+
+		if (i & 1)
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+
+		if (!(i & 1))
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x400);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+}
+
+static u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg80, reg82, reg84, out;
+	int i;
+
+	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
+	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect) | 0x400;
+
+	reg80 &= ~0xF;
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(4);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(5);
+
+	for (i = 4; i >= 0; i--) {
+		u16 reg = reg80 | ((addr >> i) & 1);
+
+		if (!(i & 1)) {
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+			rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+			udelay(1);
+		}
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg | (1 << 1));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg | (1 << 1));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+
+		if (i & 1) {
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+			rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+			udelay(1);
+		}
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x000E);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x040E);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3) | (1 << 1));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(2);
+
+	out = 0;
+	for (i = 11; i >= 0; i--) {
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(1);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+
+		if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1))
+			out |= 1 << i;
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3) | (1 << 2));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(2);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0);
+
+	return out;
+}
+
+static const u16 rtl8225bcd_rxgain[] = {
+	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
+	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
+	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
+	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
+	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
+	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
+	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
+	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
+	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
+	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
+	0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
+	0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
+};
+
+static const u8 rtl8225_agc[] = {
+	0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
+	0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
+	0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
+	0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
+	0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
+	0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
+	0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
+	0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
+	0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
+	0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
+	0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
+	0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
+	0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
+};
+
+static const u8 rtl8225_gain[] = {
+	0x23, 0x88, 0x7c, 0xa5, /* -82dbm */
+	0x23, 0x88, 0x7c, 0xb5, /* -82dbm */
+	0x23, 0x88, 0x7c, 0xc5, /* -82dbm */
+	0x33, 0x80, 0x79, 0xc5, /* -78dbm */
+	0x43, 0x78, 0x76, 0xc5, /* -74dbm */
+	0x53, 0x60, 0x73, 0xc5, /* -70dbm */
+	0x63, 0x58, 0x70, 0xc5, /* -66dbm */
+};
+
+static const u8 rtl8225_threshold[] = {
+	0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd
+};
+
+static const u8 rtl8225_tx_gain_cck_ofdm[] = {
+	0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
+};
+
+static const u8 rtl8225_tx_power_cck[] = {
+	0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
+	0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
+	0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
+	0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
+	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
+	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
+};
+
+static const u8 rtl8225_tx_power_cck_ch14[] = {
+	0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
+	0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
+	0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
+	0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
+	0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
+	0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225_tx_power_ofdm[] = {
+	0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
+};
+
+static const u32 rtl8225_chan[] = {
+	0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c,
+	0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72
+};
+
+static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 cck_power, ofdm_power;
+	const u8 *tmp;
+	u32 reg;
+	int i;
+
+	cck_power = priv->channels[channel - 1].hw_value & 0xFF;
+	ofdm_power = priv->channels[channel - 1].hw_value >> 8;
+
+	cck_power = min(cck_power, (u8)35);
+	ofdm_power = min(ofdm_power, (u8)35);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+			 rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
+
+	if (channel == 14)
+		tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8];
+	else
+		tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8];
+
+	for (i = 0; i < 8; i++)
+		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+	msleep(1); /* FIXME: optional? */
+
+	/* TODO: use set_anaparam2 dev.c_func*/
+	/* anaparam2 on */
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+			 rtl8225_tx_gain_cck_ofdm[ofdm_power/6] >> 1);
+
+	tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6];
+
+	rtl8225_write_phy_ofdm(dev, 5, *tmp);
+	rtl8225_write_phy_ofdm(dev, 7, *tmp);
+
+	msleep(1);
+}
+
+static void rtl8225_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int i;
+
+	rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON);
+
+	/* host_pci_init */
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	msleep(200);	/* FIXME: ehh?? */
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6));
+
+	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
+
+	/* TODO: check if we need really to change BRSR to do RF config */
+	rtl818x_ioread16(priv, &priv->map->BRSR);
+	rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
+	rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl8225_write(dev, 0x0, 0x067);
+	rtl8225_write(dev, 0x1, 0xFE0);
+	rtl8225_write(dev, 0x2, 0x44D);
+	rtl8225_write(dev, 0x3, 0x441);
+	rtl8225_write(dev, 0x4, 0x8BE);
+	rtl8225_write(dev, 0x5, 0xBF0);		/* TODO: minipci */
+	rtl8225_write(dev, 0x6, 0xAE6);
+	rtl8225_write(dev, 0x7, rtl8225_chan[0]);
+	rtl8225_write(dev, 0x8, 0x01F);
+	rtl8225_write(dev, 0x9, 0x334);
+	rtl8225_write(dev, 0xA, 0xFD4);
+	rtl8225_write(dev, 0xB, 0x391);
+	rtl8225_write(dev, 0xC, 0x050);
+	rtl8225_write(dev, 0xD, 0x6DB);
+	rtl8225_write(dev, 0xE, 0x029);
+	rtl8225_write(dev, 0xF, 0x914); msleep(1);
+
+	rtl8225_write(dev, 0x2, 0xC4D); msleep(100);
+
+	rtl8225_write(dev, 0x0, 0x127);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) {
+		rtl8225_write(dev, 0x1, i + 1);
+		rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]);
+	}
+
+	rtl8225_write(dev, 0x0, 0x027);
+	rtl8225_write(dev, 0x0, 0x22F);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+		msleep(1);
+		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+		msleep(1);
+	}
+
+	msleep(1);
+
+	rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x06, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x08, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x11, 0x03); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1b, 0x76); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
+
+	rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+	rtl8225_write_phy_cck(dev, 0x19, 0x00);
+	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+	rtl8225_write_phy_cck(dev, 0x40, 0x86);
+	rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x44, 0x1f); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x45, 0x1e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x46, 0x1a); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x47, 0x15); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x48, 0x10); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x49, 0x0a); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4a, 0x05); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4b, 0x02); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
+
+	rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D); msleep(1);
+
+	rtl8225_rf_set_tx_power(dev, 1);
+
+	/* RX antenna default to A */
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);	/* B: 0xDB */
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);	/* B: 0x10 */
+
+	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
+	msleep(1);
+	rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+
+	rtl8225_write(dev, 0x0c, 0x50);
+	/* set OFDM initial gain */
+	rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[4 * 4]);
+	rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[4 * 4 + 1]);
+	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[4 * 4 + 2]);
+	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[4 * 4 + 3]);
+	/* set CCK threshold */
+	rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[0]);
+}
+
+static const u8 rtl8225z2_tx_power_cck_ch14[] = {
+	0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225z2_tx_power_cck_B[] = {
+	0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x04
+};
+
+static const u8 rtl8225z2_tx_power_cck_A[] = {
+	0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04
+};
+
+static const u8 rtl8225z2_tx_power_cck[] = {
+	0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
+};
+
+static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 cck_power, ofdm_power;
+	const u8 *tmp;
+	int i;
+
+	cck_power = priv->channels[channel - 1].hw_value & 0xFF;
+	ofdm_power = priv->channels[channel - 1].hw_value >> 8;
+
+	if (channel == 14)
+		tmp = rtl8225z2_tx_power_cck_ch14;
+	else if (cck_power == 12)
+		tmp = rtl8225z2_tx_power_cck_B;
+	else if (cck_power == 13)
+		tmp = rtl8225z2_tx_power_cck_A;
+	else
+		tmp = rtl8225z2_tx_power_cck;
+
+	for (i = 0; i < 8; i++)
+		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+	cck_power = min(cck_power, (u8)35);
+	if (cck_power == 13 || cck_power == 14)
+		cck_power = 12;
+	if (cck_power >= 15)
+		cck_power -= 2;
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, cck_power);
+	rtl818x_ioread8(priv, &priv->map->TX_GAIN_CCK);
+	msleep(1);
+
+	ofdm_power = min(ofdm_power, (u8)35);
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, ofdm_power);
+
+	rtl8225_write_phy_ofdm(dev, 2, 0x62);
+	rtl8225_write_phy_ofdm(dev, 5, 0x00);
+	rtl8225_write_phy_ofdm(dev, 6, 0x40);
+	rtl8225_write_phy_ofdm(dev, 7, 0x00);
+	rtl8225_write_phy_ofdm(dev, 8, 0x40);
+
+	msleep(1);
+}
+
+static const u16 rtl8225z2_rxgain[] = {
+	0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0008, 0x0009,
+	0x000a, 0x000b, 0x0102, 0x0103, 0x0104, 0x0105, 0x0140, 0x0141,
+	0x0142, 0x0143, 0x0144, 0x0145, 0x0180, 0x0181, 0x0182, 0x0183,
+	0x0184, 0x0185, 0x0188, 0x0189, 0x018a, 0x018b, 0x0243, 0x0244,
+	0x0245, 0x0280, 0x0281, 0x0282, 0x0283, 0x0284, 0x0285, 0x0288,
+	0x0289, 0x028a, 0x028b, 0x028c, 0x0342, 0x0343, 0x0344, 0x0345,
+	0x0380, 0x0381, 0x0382, 0x0383, 0x0384, 0x0385, 0x0388, 0x0389,
+	0x038a, 0x038b, 0x038c, 0x038d, 0x0390, 0x0391, 0x0392, 0x0393,
+	0x0394, 0x0395, 0x0398, 0x0399, 0x039a, 0x039b, 0x039c, 0x039d,
+	0x03a0, 0x03a1, 0x03a2, 0x03a3, 0x03a4, 0x03a5, 0x03a8, 0x03a9,
+	0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
+	0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
+};
+
+static void rtl8225z2_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int i;
+
+	rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON);
+
+	/* host_pci_init */
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	msleep(200);	/* FIXME: ehh?? */
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6));
+
+	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00088008);
+
+	/* TODO: check if we need really to change BRSR to do RF config */
+	rtl818x_ioread16(priv, &priv->map->BRSR);
+	rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
+	rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+
+	rtl8225_write(dev, 0x0, 0x0B7); msleep(1);
+	rtl8225_write(dev, 0x1, 0xEE0); msleep(1);
+	rtl8225_write(dev, 0x2, 0x44D); msleep(1);
+	rtl8225_write(dev, 0x3, 0x441); msleep(1);
+	rtl8225_write(dev, 0x4, 0x8C3); msleep(1);
+	rtl8225_write(dev, 0x5, 0xC72); msleep(1);
+	rtl8225_write(dev, 0x6, 0x0E6); msleep(1);
+	rtl8225_write(dev, 0x7, 0x82A); msleep(1);
+	rtl8225_write(dev, 0x8, 0x03F); msleep(1);
+	rtl8225_write(dev, 0x9, 0x335); msleep(1);
+	rtl8225_write(dev, 0xa, 0x9D4); msleep(1);
+	rtl8225_write(dev, 0xb, 0x7BB); msleep(1);
+	rtl8225_write(dev, 0xc, 0x850); msleep(1);
+	rtl8225_write(dev, 0xd, 0xCDF); msleep(1);
+	rtl8225_write(dev, 0xe, 0x02B); msleep(1);
+	rtl8225_write(dev, 0xf, 0x114); msleep(100);
+
+	if (!(rtl8225_read(dev, 6) & (1 << 7))) {
+		rtl8225_write(dev, 0x02, 0x0C4D);
+		msleep(200);
+		rtl8225_write(dev, 0x02, 0x044D);
+		msleep(100);
+		/* TODO: readd calibration failure message when the calibration
+		   check works */
+	}
+
+	rtl8225_write(dev, 0x0, 0x1B7);
+	rtl8225_write(dev, 0x3, 0x002);
+	rtl8225_write(dev, 0x5, 0x004);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
+		rtl8225_write(dev, 0x1, i + 1);
+		rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
+	}
+
+	rtl8225_write(dev, 0x0, 0x0B7); msleep(100);
+	rtl8225_write(dev, 0x2, 0xC4D);
+
+	msleep(200);
+	rtl8225_write(dev, 0x2, 0x44D);
+	msleep(100);
+
+	rtl8225_write(dev, 0x00, 0x2BF);
+	rtl8225_write(dev, 0xFF, 0xFFFF);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+		msleep(1);
+		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+		msleep(1);
+	}
+
+	msleep(1);
+
+	rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0d, 0x43);
+	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x11, 0x06); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1b, 0x11); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1e, 0xb3); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x23, 0x80); msleep(1); /* FIXME: not needed? */
+	rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
+
+	rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+	rtl8225_write_phy_cck(dev, 0x19, 0x00);
+	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+	rtl8225_write_phy_cck(dev, 0x40, 0x86);
+	rtl8225_write_phy_cck(dev, 0x41, 0x8a); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x44, 0x36); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x45, 0x35); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x46, 0x2e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x47, 0x25); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x48, 0x1c); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x49, 0x12); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4a, 0x09); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4b, 0x04); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
+
+	rtl818x_iowrite8(priv, (u8 __iomem *)((void __iomem *)priv->map + 0x5B), 0x0D); msleep(1);
+
+	rtl8225z2_rf_set_tx_power(dev, 1);
+
+	/* RX antenna default to A */
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);	/* B: 0xDB */
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);	/* B: 0x10 */
+
+	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
+	msleep(1);
+	rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+}
+
+static void rtl8225_rf_stop(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 reg;
+
+	rtl8225_write(dev, 0x4, 0x1f); msleep(1);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_OFF);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_OFF);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+}
+
+static void rtl8225_rf_set_channel(struct ieee80211_hw *dev,
+				   struct ieee80211_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int chan =
+		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
+
+	if (priv->rf->init == rtl8225_rf_init)
+		rtl8225_rf_set_tx_power(dev, chan);
+	else
+		rtl8225z2_rf_set_tx_power(dev, chan);
+
+	rtl8225_write(dev, 0x7, rtl8225_chan[chan - 1]);
+	msleep(10);
+}
+
+static const struct rtl818x_rf_ops rtl8225_ops = {
+	.name		= "rtl8225",
+	.init		= rtl8225_rf_init,
+	.stop		= rtl8225_rf_stop,
+	.set_chan	= rtl8225_rf_set_channel,
+};
+
+static const struct rtl818x_rf_ops rtl8225z2_ops = {
+	.name		= "rtl8225z2",
+	.init		= rtl8225z2_rf_init,
+	.stop		= rtl8225_rf_stop,
+	.set_chan	= rtl8225_rf_set_channel,
+};
+
+const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg8, reg9;
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	msleep(100);
+
+	rtl8225_write(dev, 0, 0x1B7);
+
+	reg8 = rtl8225_read(dev, 8);
+	reg9 = rtl8225_read(dev, 9);
+
+	rtl8225_write(dev, 0, 0x0B7);
+
+	if (reg8 != 0x588 || reg9 != 0x700)
+		return &rtl8225_ops;
+
+	return &rtl8225z2_ops;
+}
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.h
new file mode 100644
index 000000000..de7727b74
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef RTL8180_RTL8225_H
+#define RTL8180_RTL8225_H
+
+#define RTL8225_ANAPARAM_ON	0xa0000b59
+#define RTL8225_ANAPARAM2_ON	0x860dec11
+#define RTL8225_ANAPARAM_OFF	0xa00beb59
+#define RTL8225_ANAPARAM2_OFF	0x840dec11
+
+const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *);
+
+static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev,
+					  u8 addr, u8 data)
+{
+	rtl8180_write_phy(dev, addr, data);
+}
+
+static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev,
+					 u8 addr, u8 data)
+{
+	rtl8180_write_phy(dev, addr, data | 0x10000);
+}
+
+#endif /* RTL8180_RTL8225_H */
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.c
new file mode 100644
index 000000000..51e32df61
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.c
@@ -0,0 +1,475 @@
+
+/* Radio tuning for RTL8225 on RTL8187SE
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ * Copyright 2014 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8180 and Realtek r8187se drivers, which are:
+ * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * Also based on the rtl8187 driver, which is:
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "rtl8225se.h"
+
+#define PFX "rtl8225 (se) "
+
+static const u32 RF_GAIN_TABLE[] = {
+	0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
+	0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
+	0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
+	0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
+	0x0183, 0x0163, 0x0143, 0x0123, 0x0103
+};
+
+static const u8 cck_ofdm_gain_settings[] = {
+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+	0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
+	0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
+	0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+	0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
+	0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
+};
+
+static const u8 rtl8225se_tx_gain_cck_ofdm[] = {
+	0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
+};
+
+static const u8 rtl8225se_tx_power_cck[] = {
+	0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
+	0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
+	0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
+	0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
+	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
+	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
+};
+
+static const u8 rtl8225se_tx_power_cck_ch14[] = {
+	0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
+	0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
+	0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
+	0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
+	0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
+	0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225se_tx_power_ofdm[] = {
+	0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
+};
+
+static const u32 rtl8225se_chan[] = {
+	0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380,
+	0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A,
+};
+
+static const u8 rtl8225sez2_tx_power_cck_ch14[] = {
+	0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225sez2_tx_power_cck_B[] = {
+	0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x04
+};
+
+static const u8 rtl8225sez2_tx_power_cck_A[] = {
+	0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04
+};
+
+static const u8 rtl8225sez2_tx_power_cck[] = {
+	0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
+};
+
+static const u8 ZEBRA_AGC[] = {
+	0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A,
+	0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
+	0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A,
+	0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
+	0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27,
+	0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
+	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+	0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
+	0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b,
+	0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
+	0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21,
+	0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
+	0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27,
+	0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
+};
+
+static const u8 OFDM_CONFIG[] = {
+	0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
+	0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
+	0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
+	0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
+	0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
+	0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
+	0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
+	0xD8, 0x3C, 0x7B, 0x10, 0x10
+};
+
+static void rtl8187se_three_wire_io(struct ieee80211_hw *dev, u8 *data,
+				    u8 len, bool write)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int i;
+	u8 tmp;
+
+	do {
+		for (i = 0; i < 5; i++) {
+			tmp = rtl818x_ioread8(priv, SW_3W_CMD1);
+			if (!(tmp & 0x3))
+				break;
+			udelay(10);
+		}
+		if (i == 5)
+			wiphy_err(dev->wiphy, PFX
+				"CmdReg: 0x%x RE/WE bits aren't clear\n", tmp);
+
+		tmp = rtl818x_ioread8(priv, &priv->map->rf_sw_config) | 0x02;
+		rtl818x_iowrite8(priv, &priv->map->rf_sw_config, tmp);
+
+		tmp = rtl818x_ioread8(priv, REG_ADDR1(0x84)) & 0xF7;
+		rtl818x_iowrite8(priv, REG_ADDR1(0x84), tmp);
+		if (write) {
+			if (len == 16) {
+				rtl818x_iowrite16(priv, SW_3W_DB0,
+				  *(u16 *)data);
+			} else if (len == 64) {
+				rtl818x_iowrite32(priv, SW_3W_DB0_4,
+				  *((u32 *)data));
+				rtl818x_iowrite32(priv, SW_3W_DB1_4,
+				  *((u32 *)(data + 4)));
+			} else
+				wiphy_err(dev->wiphy, PFX
+					"Unimplemented length\n");
+		} else {
+			rtl818x_iowrite16(priv, SW_3W_DB0, *(u16 *)data);
+		}
+		if (write)
+			tmp = 2;
+		else
+			tmp = 1;
+		rtl818x_iowrite8(priv, SW_3W_CMD1, tmp);
+		for (i = 0; i < 5; i++) {
+			tmp = rtl818x_ioread8(priv, SW_3W_CMD1);
+			if (!(tmp & 0x3))
+				break;
+			udelay(10);
+		}
+		rtl818x_iowrite8(priv, SW_3W_CMD1, 0);
+		if (!write) {
+			*((u16 *)data) = rtl818x_ioread16(priv, SI_DATA_REG);
+			*((u16 *)data) &= 0x0FFF;
+		}
+	} while (0);
+}
+
+static u32 rtl8187se_rf_readreg(struct ieee80211_hw *dev, u8 addr)
+{
+	u32 dataread = addr & 0x0F;
+	rtl8187se_three_wire_io(dev, (u8 *)&dataread, 16, 0);
+	return dataread;
+}
+
+static void rtl8187se_rf_writereg(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	u32 outdata = (data << 4) | (u32)(addr & 0x0F);
+	rtl8187se_three_wire_io(dev, (u8 *)&outdata, 16, 1);
+}
+
+
+static void rtl8225se_write_zebra_agc(struct ieee80211_hw *dev)
+{
+	int i;
+
+	for (i = 0; i < 128; i++) {
+		rtl8225se_write_phy_ofdm(dev, 0xF, ZEBRA_AGC[i]);
+		rtl8225se_write_phy_ofdm(dev, 0xE, i+0x80);
+		rtl8225se_write_phy_ofdm(dev, 0xE, 0);
+	}
+}
+
+static void rtl8187se_write_ofdm_config(struct ieee80211_hw *dev)
+{
+	/* write OFDM_CONFIG table */
+	int i;
+
+	for (i = 0; i < 60; i++)
+		rtl8225se_write_phy_ofdm(dev, i, OFDM_CONFIG[i]);
+
+}
+
+static void rtl8225sez2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 cck_power, ofdm_power;
+
+	cck_power = priv->channels[channel - 1].hw_value & 0xFF;
+	if (cck_power > 35)
+		cck_power = 35;
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+			 cck_ofdm_gain_settings[cck_power]);
+
+	usleep_range(1000, 5000);
+	ofdm_power = priv->channels[channel - 1].hw_value >> 8;
+	if (ofdm_power > 35)
+		ofdm_power = 35;
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+			 cck_ofdm_gain_settings[ofdm_power]);
+	if (ofdm_power < 12) {
+		rtl8225se_write_phy_ofdm(dev, 7, 0x5C);
+		rtl8225se_write_phy_ofdm(dev, 9, 0x5C);
+	}
+	if (ofdm_power < 18) {
+		rtl8225se_write_phy_ofdm(dev, 7, 0x54);
+		rtl8225se_write_phy_ofdm(dev, 9, 0x54);
+	} else {
+		rtl8225se_write_phy_ofdm(dev, 7, 0x50);
+		rtl8225se_write_phy_ofdm(dev, 9, 0x50);
+	}
+
+	usleep_range(1000, 5000);
+}
+
+static void rtl8187se_write_rf_gain(struct ieee80211_hw *dev)
+{
+	int i;
+
+	for (i = 0; i <= 36; i++) {
+		rtl8187se_rf_writereg(dev, 0x01, i); mdelay(1);
+		rtl8187se_rf_writereg(dev, 0x02, RF_GAIN_TABLE[i]); mdelay(1);
+	}
+}
+
+static void rtl8187se_write_initial_gain(struct ieee80211_hw *dev,
+					int init_gain)
+{
+	switch (init_gain) {
+	default:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x26); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1);
+		break;
+	case 2:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1);
+		break;
+	case 3:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
+		break;
+	case 4:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
+		break;
+	case 5:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
+		break;
+	case 6:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
+		break;
+	case 7:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0xA6); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
+		break;
+	case 8:
+		rtl8225se_write_phy_ofdm(dev, 0x17, 0x66); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x24, 0xB6); mdelay(1);
+		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
+		break;
+	}
+}
+
+void rtl8225se_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 rf23, rf24;
+	u8 d_cut = 0;
+	u8 tmp;
+
+	/* Page 1 */
+	rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1);
+	rf23 = rtl8187se_rf_readreg(dev, 0x08); mdelay(1);
+	rf24 = rtl8187se_rf_readreg(dev, 0x09); mdelay(1);
+	if (rf23 == 0x0818 && rf24 == 0x070C)
+		d_cut = 1;
+
+	wiphy_info(dev->wiphy, "RTL8225-SE version %s\n",
+		d_cut ? "D" : "not-D");
+
+	/* Page 0: reg 0 - 15 */
+	rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x01, 0x06E0); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x03, 0x07F1); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0975); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x05, 0x0C72); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x06, 0x0AE6); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x07, 0x00CA); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x08, 0x0E1C); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x09, 0x02F0); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0A, 0x09D0); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0B, 0x01BA); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0C, 0x0640); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0E, 0x0020); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0F, 0x0990); mdelay(1);
+	/* page 1: reg 16-30 */
+	rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x03, 0x0806); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x04, 0x03A7); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x05, 0x059B); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x06, 0x0081); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x07, 0x01A0); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0B, 0x0418); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0C, 0x0FBE); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(1);
+	if (d_cut)
+		rtl8187se_rf_writereg(dev, 0x0E, 0x0807);
+	else
+		rtl8187se_rf_writereg(dev, 0x0E, 0x0806);
+	mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x00, 0x01D7); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x03, 0x0E00); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0E50); mdelay(1);
+
+	rtl8187se_write_rf_gain(dev);
+
+	rtl8187se_rf_writereg(dev, 0x05, 0x0203); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x06, 0x0200); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x00, 0x0037); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0160); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x07, 0x0080); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x02, 0x088D); msleep(221);
+	rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11);
+	rtl8187se_rf_writereg(dev, 0x07, 0x0000); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x07, 0x0180); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x07, 0x0220); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x07, 0x03E0); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x06, 0x00C1); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1);
+	if (priv->xtal_cal) {
+		tmp = (priv->xtal_in << 4) | (priv->xtal_out << 1) |
+		      (1 << 11) | (1 << 9);
+		rtl8187se_rf_writereg(dev, 0x0F, tmp);
+		wiphy_info(dev->wiphy, "Xtal cal\n");
+		mdelay(1);
+	} else {
+		wiphy_info(dev->wiphy, "NO Xtal cal\n");
+		rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC);
+		mdelay(1);
+	}
+	/* page 0 */
+	rtl8187se_rf_writereg(dev, 0x00, 0x00BF); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0975); msleep(31);
+	rtl8187se_rf_writereg(dev, 0x00, 0x0197); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x05, 0x05AB); mdelay(1);
+
+	rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x01, 0x0000); mdelay(1);
+	rtl8187se_rf_writereg(dev, 0x02, 0x0000); mdelay(1);
+	/* power save parameters */
+	/* TODO: move to dev.c */
+	rtl818x_iowrite8(priv, REG_ADDR1(0x024E),
+		 rtl818x_ioread8(priv, REG_ADDR1(0x24E)) & 0x9F);
+	rtl8225se_write_phy_cck(dev, 0x00, 0xC8);
+	rtl8225se_write_phy_cck(dev, 0x06, 0x1C);
+	rtl8225se_write_phy_cck(dev, 0x10, 0x78);
+	rtl8225se_write_phy_cck(dev, 0x2E, 0xD0);
+	rtl8225se_write_phy_cck(dev, 0x2F, 0x06);
+	rtl8225se_write_phy_cck(dev, 0x01, 0x46);
+
+	/* power control */
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 0x10);
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 0x1B);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
+	rtl8225se_write_phy_ofdm(dev, 0x00, 0x12);
+
+	rtl8225se_write_zebra_agc(dev);
+
+	rtl8225se_write_phy_ofdm(dev, 0x10, 0x00);
+
+	rtl8187se_write_ofdm_config(dev);
+
+	/* turn on RF */
+	rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500);
+	/* turn on RF again */
+	rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500);
+	rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500);
+	/* turn on BB */
+	rtl8225se_write_phy_ofdm(dev, 0x10, 0x40);
+	rtl8225se_write_phy_ofdm(dev, 0x12, 0x40);
+
+	rtl8187se_write_initial_gain(dev, 4);
+}
+
+void rtl8225se_rf_stop(struct ieee80211_hw *dev)
+{
+	/* checked for 8187se */
+	struct rtl8180_priv *priv = dev->priv;
+
+	/* turn off BB RXIQ matrix to cut off rx signal */
+	rtl8225se_write_phy_ofdm(dev, 0x10, 0x00);
+	rtl8225se_write_phy_ofdm(dev, 0x12, 0x00);
+	/* turn off RF */
+	rtl8187se_rf_writereg(dev, 0x04, 0x0000);
+	rtl8187se_rf_writereg(dev, 0x00, 0x0000);
+
+	usleep_range(1000, 5000);
+	/* turn off A/D and D/A */
+	rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_OFF);
+	rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_OFF);
+}
+
+void rtl8225se_rf_set_channel(struct ieee80211_hw *dev,
+				   struct ieee80211_conf *conf)
+{
+	int chan =
+		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
+
+	rtl8225sez2_rf_set_tx_power(dev, chan);
+	rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]);
+	if ((rtl8187se_rf_readreg(dev, 0x7) & 0x0F80) !=
+		rtl8225se_chan[chan - 1])
+		rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]);
+	usleep_range(10000, 20000);
+}
+
+static const struct rtl818x_rf_ops rtl8225se_ops = {
+	.name		= "rtl8225-se",
+	.init		= rtl8225se_rf_init,
+	.stop		= rtl8225se_rf_stop,
+	.set_chan	= rtl8225se_rf_set_channel,
+};
+
+const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *dev)
+{
+	return &rtl8225se_ops;
+}
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.h
new file mode 100644
index 000000000..229400264
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.h
@@ -0,0 +1,61 @@
+
+/* Definitions for RTL8187SE hardware
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ * Copyright 2014 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8180 and Realtek r8187se drivers, which are:
+ * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * Also based on the rtl8187 driver, which is:
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL8187SE_RTL8225_H
+#define RTL8187SE_RTL8225_H
+
+#define RTL8225SE_ANAPARAM_ON	0xb0054d00
+#define RTL8225SE_ANAPARAM2_ON	0x000004c6
+
+/* all off except PLL */
+#define RTL8225SE_ANAPARAM_OFF	0xb0054dec
+/* all on including PLL */
+#define RTL8225SE_ANAPARAM_OFF2	0xb0054dfc
+
+#define RTL8225SE_ANAPARAM2_OFF	0x00ff04c6
+
+#define RTL8225SE_ANAPARAM3	0x10
+
+enum rtl8187se_power_state {
+	RTL8187SE_POWER_ON,
+	RTL8187SE_POWER_OFF,
+	RTL8187SE_POWER_SLEEP
+};
+
+static inline void rtl8225se_write_phy_ofdm(struct ieee80211_hw *dev,
+					  u8 addr, u8 data)
+{
+	rtl8180_write_phy(dev, addr, data);
+}
+
+static inline void rtl8225se_write_phy_cck(struct ieee80211_hw *dev,
+					 u8 addr, u8 data)
+{
+	rtl8180_write_phy(dev, addr, data | 0x10000);
+}
+
+
+const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *);
+void rtl8225se_rf_stop(struct ieee80211_hw *dev);
+void rtl8225se_rf_set_channel(struct ieee80211_hw *dev,
+				     struct ieee80211_conf *conf);
+void rtl8225se_rf_conf_erp(struct ieee80211_hw *dev,
+				  struct ieee80211_bss_conf *info);
+void rtl8225se_rf_init(struct ieee80211_hw *dev);
+
+#endif /* RTL8187SE_RTL8225_H */
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.c
new file mode 100644
index 000000000..959b04982
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.c
@@ -0,0 +1,228 @@
+
+/*
+ * Radio tuning for Philips SA2400 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "sa2400.h"
+
+static const u32 sa2400_chan[] = {
+	0x00096c, /* ch1 */
+	0x080970,
+	0x100974,
+	0x180978,
+	0x000980,
+	0x080984,
+	0x100988,
+	0x18098c,
+	0x000994,
+	0x080998,
+	0x10099c,
+	0x1809a0,
+	0x0009a8,
+	0x0009b4, /* ch 14 */
+};
+
+static void write_sa2400(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 phy_config;
+
+	/* MAC will bang bits to the sa2400. sw 3-wire is NOT used */
+	phy_config = 0xb0000000;
+
+	phy_config |= ((u32)(addr & 0xf)) << 24;
+	phy_config |= data & 0xffffff;
+
+	rtl818x_iowrite32(priv,
+		(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
+
+	msleep(3);
+}
+
+static void sa2400_write_phy_antenna(struct ieee80211_hw *dev, short chan)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 ant = SA2400_ANTENNA;
+
+	if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
+		ant |= BB_ANTENNA_B;
+
+	if (chan == 14)
+		ant |= BB_ANTATTEN_CHAN14;
+
+	rtl8180_write_phy(dev, 0x10, ant);
+
+}
+
+static u8 sa2400_rf_rssi_map[] = {
+	0x64, 0x64, 0x63, 0x62, 0x61, 0x60, 0x5f, 0x5e,
+	0x5d, 0x5c, 0x5b, 0x5a, 0x57, 0x54, 0x52, 0x50,
+	0x4e, 0x4c, 0x4a, 0x48, 0x46, 0x44, 0x41, 0x3f,
+	0x3c, 0x3a, 0x37, 0x36, 0x36, 0x1c, 0x1c, 0x1b,
+	0x1b, 0x1a, 0x1a, 0x19, 0x19, 0x18, 0x18, 0x17,
+	0x17, 0x16, 0x16, 0x15, 0x15, 0x14, 0x14, 0x13,
+	0x13, 0x12, 0x12, 0x11, 0x11, 0x10, 0x10, 0x0f,
+	0x0f, 0x0e, 0x0e, 0x0d, 0x0d, 0x0c, 0x0c, 0x0b,
+	0x0b, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x07,
+	0x07, 0x06, 0x06, 0x05, 0x04, 0x03, 0x02,
+};
+
+static u8 sa2400_rf_calc_rssi(u8 agc, u8 sq)
+{
+	if (sq == 0x80)
+		return 1;
+
+	if (sq > 78)
+		return 32;
+
+	/* TODO: recalc sa2400_rf_rssi_map to avoid mult / div */
+	return 65 * sa2400_rf_rssi_map[sq] / 100;
+}
+
+static void sa2400_rf_set_channel(struct ieee80211_hw *dev,
+				  struct ieee80211_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int channel =
+		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
+	u32 txpw = priv->channels[channel - 1].hw_value & 0xFF;
+	u32 chan = sa2400_chan[channel - 1];
+
+	write_sa2400(dev, 7, txpw);
+
+	sa2400_write_phy_antenna(dev, channel);
+
+	write_sa2400(dev, 0, chan);
+	write_sa2400(dev, 1, 0xbb50);
+	write_sa2400(dev, 2, 0x80);
+	write_sa2400(dev, 3, 0);
+}
+
+static void sa2400_rf_stop(struct ieee80211_hw *dev)
+{
+	write_sa2400(dev, 4, 0);
+}
+
+static void sa2400_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 anaparam, txconf;
+	u8 firdac;
+	int analogphy = priv->rfparam & RF_PARAM_ANALOGPHY;
+
+	anaparam = priv->anaparam;
+	anaparam &= ~(1 << ANAPARAM_TXDACOFF_SHIFT);
+	anaparam &= ~ANAPARAM_PWR1_MASK;
+	anaparam &= ~ANAPARAM_PWR0_MASK;
+
+	if (analogphy) {
+		anaparam |= SA2400_ANA_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT;
+		firdac = 0;
+	} else {
+		anaparam |= (SA2400_DIG_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT);
+		anaparam |= (SA2400_ANAPARAM_PWR0_ON << ANAPARAM_PWR0_SHIFT);
+		firdac = 1 << SA2400_REG4_FIRDAC_SHIFT;
+	}
+
+	rtl8180_set_anaparam(priv, anaparam);
+
+	write_sa2400(dev, 0, sa2400_chan[0]);
+	write_sa2400(dev, 1, 0xbb50);
+	write_sa2400(dev, 2, 0x80);
+	write_sa2400(dev, 3, 0);
+	write_sa2400(dev, 4, 0x19340 | firdac);
+	write_sa2400(dev, 5, 0x1dfb | (SA2400_MAX_SENS - 54) << 15);
+	write_sa2400(dev, 4, 0x19348 | firdac); /* calibrate VCO */
+
+	if (!analogphy)
+		write_sa2400(dev, 4, 0x1938c); /*???*/
+
+	write_sa2400(dev, 4, 0x19340 | firdac);
+
+	write_sa2400(dev, 0, sa2400_chan[0]);
+	write_sa2400(dev, 1, 0xbb50);
+	write_sa2400(dev, 2, 0x80);
+	write_sa2400(dev, 3, 0);
+	write_sa2400(dev, 4, 0x19344 | firdac); /* calibrate filter */
+
+	/* new from rtl8180 embedded driver (rtl8181 project) */
+	write_sa2400(dev, 6, 0x13ff | (1 << 23)); /* MANRX */
+	write_sa2400(dev, 8, 0); /* VCO */
+
+	if (analogphy) {
+		rtl8180_set_anaparam(priv, anaparam |
+				     (1 << ANAPARAM_TXDACOFF_SHIFT));
+
+		txconf = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+		rtl818x_iowrite32(priv, &priv->map->TX_CONF,
+			txconf | RTL818X_TX_CONF_LOOPBACK_CONT);
+
+		write_sa2400(dev, 4, 0x19341); /* calibrates DC */
+
+		/* a 5us sleep is required here,
+		 * we rely on the 3ms delay introduced in write_sa2400 */
+		write_sa2400(dev, 4, 0x19345);
+
+		/* a 20us sleep is required here,
+		 * we rely on the 3ms delay introduced in write_sa2400 */
+
+		rtl818x_iowrite32(priv, &priv->map->TX_CONF, txconf);
+
+		rtl8180_set_anaparam(priv, anaparam);
+	}
+	/* end new code */
+
+	write_sa2400(dev, 4, 0x19341 | firdac); /* RTX MODE */
+
+	/* baseband configuration */
+	rtl8180_write_phy(dev, 0, 0x98);
+	rtl8180_write_phy(dev, 3, 0x38);
+	rtl8180_write_phy(dev, 4, 0xe0);
+	rtl8180_write_phy(dev, 5, 0x90);
+	rtl8180_write_phy(dev, 6, 0x1a);
+	rtl8180_write_phy(dev, 7, 0x64);
+
+	sa2400_write_phy_antenna(dev, 1);
+
+	rtl8180_write_phy(dev, 0x11, 0x80);
+
+	if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
+	    RTL818X_CONFIG2_ANTENNA_DIV)
+		rtl8180_write_phy(dev, 0x12, 0xc7); /* enable ant diversity */
+	else
+		rtl8180_write_phy(dev, 0x12, 0x47); /* disable ant diversity */
+
+	rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold);
+
+	rtl8180_write_phy(dev, 0x19, 0x0);
+	rtl8180_write_phy(dev, 0x1a, 0xa0);
+}
+
+const struct rtl818x_rf_ops sa2400_rf_ops = {
+	.name		= "Philips",
+	.init		= sa2400_rf_init,
+	.stop		= sa2400_rf_stop,
+	.set_chan	= sa2400_rf_set_channel,
+	.calc_rssi	= sa2400_rf_calc_rssi,
+};
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.h
new file mode 100644
index 000000000..fb0093f35
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.h
@@ -0,0 +1,36 @@
+#ifndef RTL8180_SA2400_H
+#define RTL8180_SA2400_H
+
+/*
+ * Radio tuning for Philips SA2400 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define SA2400_ANTENNA 0x91
+#define SA2400_DIG_ANAPARAM_PWR1_ON 0x8
+#define SA2400_ANA_ANAPARAM_PWR1_ON 0x28
+#define SA2400_ANAPARAM_PWR0_ON 0x3
+
+/* RX sensitivity in dbm */
+#define SA2400_MAX_SENS 85
+
+#define SA2400_REG4_FIRDAC_SHIFT 7
+
+extern const struct rtl818x_rf_ops sa2400_rf_ops;
+
+#endif /* RTL8180_SA2400_H */
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/Makefile b/drivers/net/wireless/realtek/rtl818x/rtl8187/Makefile
new file mode 100644
index 000000000..ff074912a
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/Makefile
@@ -0,0 +1,5 @@
+rtl8187-objs		:= dev.o rtl8225.o leds.o rfkill.o
+
+obj-$(CONFIG_RTL8187)	+= rtl8187.o
+
+ccflags-y += -Idrivers/net/wireless/realtek/rtl818x
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
new file mode 100644
index 000000000..518caaaf8
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
@@ -0,0 +1,1683 @@
+/*
+ * Linux device driver for RTL8187
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * The driver was extended to the RTL8187B in 2008 by:
+ *	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *	Hin-Tak Leung <htl10@users.sourceforge.net>
+ *	Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * Magic delays and register offsets below are taken from the original
+ * r8187 driver sources.  Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/eeprom_93cx6.h>
+#include <linux/module.h>
+#include <net/mac80211.h>
+
+#include "rtl8187.h"
+#include "rtl8225.h"
+#ifdef CONFIG_RTL8187_LEDS
+#include "leds.h"
+#endif
+#include "rfkill.h"
+
+MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
+MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>");
+MODULE_AUTHOR("Herton Ronaldo Krzesinski <herton@mandriva.com.br>");
+MODULE_AUTHOR("Hin-Tak Leung <htl10@users.sourceforge.net>");
+MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>");
+MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
+MODULE_LICENSE("GPL");
+
+static const struct usb_device_id rtl8187_table[] = {
+	/* Asus */
+	{USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187},
+	/* Belkin */
+	{USB_DEVICE(0x050d, 0x705e), .driver_info = DEVICE_RTL8187B},
+	/* Realtek */
+	{USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187},
+	{USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
+	{USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
+	{USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
+	/* Surecom */
+	{USB_DEVICE(0x0769, 0x11F2), .driver_info = DEVICE_RTL8187},
+	/* Logitech */
+	{USB_DEVICE(0x0789, 0x010C), .driver_info = DEVICE_RTL8187},
+	/* Netgear */
+	{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
+	{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
+	{USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B},
+	/* HP */
+	{USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
+	/* Sitecom */
+	{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
+	{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+	{USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B},
+	/* Sphairon Access Systems GmbH */
+	{USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
+	/* Dick Smith Electronics */
+	{USB_DEVICE(0x1371, 0x9401), .driver_info = DEVICE_RTL8187},
+	/* Abocom */
+	{USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
+	/* Qcom */
+	{USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
+	/* AirLive */
+	{USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
+	/* Linksys */
+	{USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8187_table);
+
+static const struct ieee80211_rate rtl818x_rates[] = {
+	{ .bitrate = 10, .hw_value = 0, },
+	{ .bitrate = 20, .hw_value = 1, },
+	{ .bitrate = 55, .hw_value = 2, },
+	{ .bitrate = 110, .hw_value = 3, },
+	{ .bitrate = 60, .hw_value = 4, },
+	{ .bitrate = 90, .hw_value = 5, },
+	{ .bitrate = 120, .hw_value = 6, },
+	{ .bitrate = 180, .hw_value = 7, },
+	{ .bitrate = 240, .hw_value = 8, },
+	{ .bitrate = 360, .hw_value = 9, },
+	{ .bitrate = 480, .hw_value = 10, },
+	{ .bitrate = 540, .hw_value = 11, },
+};
+
+static const struct ieee80211_channel rtl818x_channels[] = {
+	{ .center_freq = 2412 },
+	{ .center_freq = 2417 },
+	{ .center_freq = 2422 },
+	{ .center_freq = 2427 },
+	{ .center_freq = 2432 },
+	{ .center_freq = 2437 },
+	{ .center_freq = 2442 },
+	{ .center_freq = 2447 },
+	{ .center_freq = 2452 },
+	{ .center_freq = 2457 },
+	{ .center_freq = 2462 },
+	{ .center_freq = 2467 },
+	{ .center_freq = 2472 },
+	{ .center_freq = 2484 },
+};
+
+static void rtl8187_iowrite_async_cb(struct urb *urb)
+{
+	kfree(urb->context);
+}
+
+static void rtl8187_iowrite_async(struct rtl8187_priv *priv, __le16 addr,
+				  void *data, u16 len)
+{
+	struct usb_ctrlrequest *dr;
+	struct urb *urb;
+	struct rtl8187_async_write_data {
+		u8 data[4];
+		struct usb_ctrlrequest dr;
+	} *buf;
+	int rc;
+
+	buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
+	if (!buf)
+		return;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		kfree(buf);
+		return;
+	}
+
+	dr = &buf->dr;
+
+	dr->bRequestType = RTL8187_REQT_WRITE;
+	dr->bRequest = RTL8187_REQ_SET_REG;
+	dr->wValue = addr;
+	dr->wIndex = 0;
+	dr->wLength = cpu_to_le16(len);
+
+	memcpy(buf, data, len);
+
+	usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
+			     (unsigned char *)dr, buf, len,
+			     rtl8187_iowrite_async_cb, buf);
+	usb_anchor_urb(urb, &priv->anchored);
+	rc = usb_submit_urb(urb, GFP_ATOMIC);
+	if (rc < 0) {
+		kfree(buf);
+		usb_unanchor_urb(urb);
+	}
+	usb_free_urb(urb);
+}
+
+static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
+					   __le32 *addr, u32 val)
+{
+	__le32 buf = cpu_to_le32(val);
+
+	rtl8187_iowrite_async(priv, cpu_to_le16((unsigned long)addr),
+			      &buf, sizeof(buf));
+}
+
+void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	data <<= 8;
+	data |= addr | 0x80;
+
+	rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
+	rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
+	rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
+	rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
+}
+
+static void rtl8187_tx_cb(struct urb *urb)
+{
+	struct sk_buff *skb = (struct sk_buff *)urb->context;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hw *hw = info->rate_driver_data[0];
+	struct rtl8187_priv *priv = hw->priv;
+
+	skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) :
+					  sizeof(struct rtl8187_tx_hdr));
+	ieee80211_tx_info_clear_status(info);
+
+	if (!(urb->status) && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+		if (priv->is_rtl8187b) {
+			skb_queue_tail(&priv->b_tx_status.queue, skb);
+
+			/* queue is "full", discard last items */
+			while (skb_queue_len(&priv->b_tx_status.queue) > 5) {
+				struct sk_buff *old_skb;
+
+				dev_dbg(&priv->udev->dev,
+					"transmit status queue full\n");
+
+				old_skb = skb_dequeue(&priv->b_tx_status.queue);
+				ieee80211_tx_status_irqsafe(hw, old_skb);
+			}
+			return;
+		} else {
+			info->flags |= IEEE80211_TX_STAT_ACK;
+		}
+	}
+	if (priv->is_rtl8187b)
+		ieee80211_tx_status_irqsafe(hw, skb);
+	else {
+		/* Retry information for the RTI8187 is only available by
+		 * reading a register in the device. We are in interrupt mode
+		 * here, thus queue the skb and finish on a work queue. */
+		skb_queue_tail(&priv->b_tx_status.queue, skb);
+		ieee80211_queue_delayed_work(hw, &priv->work, 0);
+	}
+}
+
+static void rtl8187_tx(struct ieee80211_hw *dev,
+		       struct ieee80211_tx_control *control,
+		       struct sk_buff *skb)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *tx_hdr =	(struct ieee80211_hdr *)(skb->data);
+	unsigned int ep;
+	void *buf;
+	struct urb *urb;
+	__le16 rts_dur = 0;
+	u32 flags;
+	int rc;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		kfree_skb(skb);
+		return;
+	}
+
+	flags = skb->len;
+	flags |= RTL818X_TX_DESC_FLAG_NO_ENC;
+
+	flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
+	if (ieee80211_has_morefrags(tx_hdr->frame_control))
+		flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
+
+	/* HW will perform RTS-CTS when only RTS flags is set.
+	 * HW will perform CTS-to-self when both RTS and CTS flags are set.
+	 * RTS rate and RTS duration will be used also for CTS-to-self.
+	 */
+	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+		flags |= RTL818X_TX_DESC_FLAG_RTS;
+		flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
+		rts_dur = ieee80211_rts_duration(dev, priv->vif,
+						 skb->len, info);
+	} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+		flags |= RTL818X_TX_DESC_FLAG_RTS | RTL818X_TX_DESC_FLAG_CTS;
+		flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
+		rts_dur = ieee80211_ctstoself_duration(dev, priv->vif,
+						 skb->len, info);
+	}
+
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			priv->seqno += 0x10;
+		tx_hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		tx_hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+	}
+
+	if (!priv->is_rtl8187b) {
+		struct rtl8187_tx_hdr *hdr = skb_push(skb, sizeof(*hdr));
+		hdr->flags = cpu_to_le32(flags);
+		hdr->len = 0;
+		hdr->rts_duration = rts_dur;
+		hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
+		buf = hdr;
+
+		ep = 2;
+	} else {
+		/* fc needs to be calculated before skb_push() */
+		unsigned int epmap[4] = { 6, 7, 5, 4 };
+		u16 fc = le16_to_cpu(tx_hdr->frame_control);
+
+		struct rtl8187b_tx_hdr *hdr = skb_push(skb, sizeof(*hdr));
+		struct ieee80211_rate *txrate =
+			ieee80211_get_tx_rate(dev, info);
+		memset(hdr, 0, sizeof(*hdr));
+		hdr->flags = cpu_to_le32(flags);
+		hdr->rts_duration = rts_dur;
+		hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
+		hdr->tx_duration =
+			ieee80211_generic_frame_duration(dev, priv->vif,
+							 info->band,
+							 skb->len, txrate);
+		buf = hdr;
+
+		if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
+			ep = 12;
+		else
+			ep = epmap[skb_get_queue_mapping(skb)];
+	}
+
+	info->rate_driver_data[0] = dev;
+	info->rate_driver_data[1] = urb;
+
+	usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
+			  buf, skb->len, rtl8187_tx_cb, skb);
+	urb->transfer_flags |= URB_ZERO_PACKET;
+	usb_anchor_urb(urb, &priv->anchored);
+	rc = usb_submit_urb(urb, GFP_ATOMIC);
+	if (rc < 0) {
+		usb_unanchor_urb(urb);
+		kfree_skb(skb);
+	}
+	usb_free_urb(urb);
+}
+
+static void rtl8187_rx_cb(struct urb *urb)
+{
+	struct sk_buff *skb = (struct sk_buff *)urb->context;
+	struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
+	struct ieee80211_hw *dev = info->dev;
+	struct rtl8187_priv *priv = dev->priv;
+	struct ieee80211_rx_status rx_status = { 0 };
+	int rate, signal;
+	u32 flags;
+	unsigned long f;
+
+	spin_lock_irqsave(&priv->rx_queue.lock, f);
+	__skb_unlink(skb, &priv->rx_queue);
+	spin_unlock_irqrestore(&priv->rx_queue.lock, f);
+	skb_put(skb, urb->actual_length);
+
+	if (unlikely(urb->status)) {
+		dev_kfree_skb_irq(skb);
+		return;
+	}
+
+	if (!priv->is_rtl8187b) {
+		struct rtl8187_rx_hdr *hdr =
+			(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
+		flags = le32_to_cpu(hdr->flags);
+		/* As with the RTL8187B below, the AGC is used to calculate
+		 * signal strength. In this case, the scaling
+		 * constants are derived from the output of p54usb.
+		 */
+		signal = -4 - ((27 * hdr->agc) >> 6);
+		rx_status.antenna = (hdr->signal >> 7) & 1;
+		rx_status.mactime = le64_to_cpu(hdr->mac_time);
+	} else {
+		struct rtl8187b_rx_hdr *hdr =
+			(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
+		/* The Realtek datasheet for the RTL8187B shows that the RX
+		 * header contains the following quantities: signal quality,
+		 * RSSI, AGC, the received power in dB, and the measured SNR.
+		 * In testing, none of these quantities show qualitative
+		 * agreement with AP signal strength, except for the AGC,
+		 * which is inversely proportional to the strength of the
+		 * signal. In the following, the signal strength
+		 * is derived from the AGC. The arbitrary scaling constants
+		 * are chosen to make the results close to the values obtained
+		 * for a BCM4312 using b43 as the driver. The noise is ignored
+		 * for now.
+		 */
+		flags = le32_to_cpu(hdr->flags);
+		signal = 14 - hdr->agc / 2;
+		rx_status.antenna = (hdr->rssi >> 7) & 1;
+		rx_status.mactime = le64_to_cpu(hdr->mac_time);
+	}
+
+	rx_status.signal = signal;
+	priv->signal = signal;
+	rate = (flags >> 20) & 0xF;
+	skb_trim(skb, flags & 0x0FFF);
+	rx_status.rate_idx = rate;
+	rx_status.freq = dev->conf.chandef.chan->center_freq;
+	rx_status.band = dev->conf.chandef.chan->band;
+	rx_status.flag |= RX_FLAG_MACTIME_START;
+	if (flags & RTL818X_RX_DESC_FLAG_SPLCP)
+		rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE;
+	if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
+		rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
+	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+	ieee80211_rx_irqsafe(dev, skb);
+
+	skb = dev_alloc_skb(RTL8187_MAX_RX);
+	if (unlikely(!skb)) {
+		/* TODO check rx queue length and refill *somewhere* */
+		return;
+	}
+
+	info = (struct rtl8187_rx_info *)skb->cb;
+	info->urb = urb;
+	info->dev = dev;
+	urb->transfer_buffer = skb_tail_pointer(skb);
+	urb->context = skb;
+	skb_queue_tail(&priv->rx_queue, skb);
+
+	usb_anchor_urb(urb, &priv->anchored);
+	if (usb_submit_urb(urb, GFP_ATOMIC)) {
+		usb_unanchor_urb(urb);
+		skb_unlink(skb, &priv->rx_queue);
+		dev_kfree_skb_irq(skb);
+	}
+}
+
+static int rtl8187_init_urbs(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	struct urb *entry = NULL;
+	struct sk_buff *skb;
+	struct rtl8187_rx_info *info;
+	int ret = 0;
+
+	while (skb_queue_len(&priv->rx_queue) < 32) {
+		skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
+		if (!skb) {
+			ret = -ENOMEM;
+			goto err;
+		}
+		entry = usb_alloc_urb(0, GFP_KERNEL);
+		if (!entry) {
+			ret = -ENOMEM;
+			goto err;
+		}
+		usb_fill_bulk_urb(entry, priv->udev,
+				  usb_rcvbulkpipe(priv->udev,
+				  priv->is_rtl8187b ? 3 : 1),
+				  skb_tail_pointer(skb),
+				  RTL8187_MAX_RX, rtl8187_rx_cb, skb);
+		info = (struct rtl8187_rx_info *)skb->cb;
+		info->urb = entry;
+		info->dev = dev;
+		skb_queue_tail(&priv->rx_queue, skb);
+		usb_anchor_urb(entry, &priv->anchored);
+		ret = usb_submit_urb(entry, GFP_KERNEL);
+		if (ret) {
+			skb_unlink(skb, &priv->rx_queue);
+			usb_unanchor_urb(entry);
+			usb_put_urb(entry);
+			goto err;
+		}
+		usb_put_urb(entry);
+	}
+	return ret;
+
+err:
+	kfree_skb(skb);
+	usb_kill_anchored_urbs(&priv->anchored);
+	return ret;
+}
+
+static void rtl8187b_status_cb(struct urb *urb)
+{
+	struct ieee80211_hw *hw = (struct ieee80211_hw *)urb->context;
+	struct rtl8187_priv *priv = hw->priv;
+	u64 val;
+	unsigned int cmd_type;
+
+	if (unlikely(urb->status))
+		return;
+
+	/*
+	 * Read from status buffer:
+	 *
+	 * bits [30:31] = cmd type:
+	 * - 0 indicates tx beacon interrupt
+	 * - 1 indicates tx close descriptor
+	 *
+	 * In the case of tx beacon interrupt:
+	 * [0:9] = Last Beacon CW
+	 * [10:29] = reserved
+	 * [30:31] = 00b
+	 * [32:63] = Last Beacon TSF
+	 *
+	 * If it's tx close descriptor:
+	 * [0:7] = Packet Retry Count
+	 * [8:14] = RTS Retry Count
+	 * [15] = TOK
+	 * [16:27] = Sequence No
+	 * [28] = LS
+	 * [29] = FS
+	 * [30:31] = 01b
+	 * [32:47] = unused (reserved?)
+	 * [48:63] = MAC Used Time
+	 */
+	val = le64_to_cpu(priv->b_tx_status.buf);
+
+	cmd_type = (val >> 30) & 0x3;
+	if (cmd_type == 1) {
+		unsigned int pkt_rc, seq_no;
+		bool tok;
+		struct sk_buff *skb;
+		struct ieee80211_hdr *ieee80211hdr;
+		unsigned long flags;
+
+		pkt_rc = val & 0xFF;
+		tok = val & (1 << 15);
+		seq_no = (val >> 16) & 0xFFF;
+
+		spin_lock_irqsave(&priv->b_tx_status.queue.lock, flags);
+		skb_queue_reverse_walk(&priv->b_tx_status.queue, skb) {
+			ieee80211hdr = (struct ieee80211_hdr *)skb->data;
+
+			/*
+			 * While testing, it was discovered that the seq_no
+			 * doesn't actually contains the sequence number.
+			 * Instead of returning just the 12 bits of sequence
+			 * number, hardware is returning entire sequence control
+			 * (fragment number plus sequence number) in a 12 bit
+			 * only field overflowing after some time. As a
+			 * workaround, just consider the lower bits, and expect
+			 * it's unlikely we wrongly ack some sent data
+			 */
+			if ((le16_to_cpu(ieee80211hdr->seq_ctrl)
+			    & 0xFFF) == seq_no)
+				break;
+		}
+		if (skb != (struct sk_buff *) &priv->b_tx_status.queue) {
+			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+			__skb_unlink(skb, &priv->b_tx_status.queue);
+			if (tok)
+				info->flags |= IEEE80211_TX_STAT_ACK;
+			info->status.rates[0].count = pkt_rc + 1;
+
+			ieee80211_tx_status_irqsafe(hw, skb);
+		}
+		spin_unlock_irqrestore(&priv->b_tx_status.queue.lock, flags);
+	}
+
+	usb_anchor_urb(urb, &priv->anchored);
+	if (usb_submit_urb(urb, GFP_ATOMIC))
+		usb_unanchor_urb(urb);
+}
+
+static int rtl8187b_init_status_urb(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	struct urb *entry;
+	int ret = 0;
+
+	entry = usb_alloc_urb(0, GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, 9),
+			  &priv->b_tx_status.buf, sizeof(priv->b_tx_status.buf),
+			  rtl8187b_status_cb, dev);
+
+	usb_anchor_urb(entry, &priv->anchored);
+	ret = usb_submit_urb(entry, GFP_KERNEL);
+	if (ret)
+		usb_unanchor_urb(entry);
+	usb_free_urb(entry);
+
+	return ret;
+}
+
+static void rtl8187_set_anaparam(struct rtl8187_priv *priv, bool rfon)
+{
+	u32 anaparam, anaparam2;
+	u8 anaparam3, reg;
+
+	if (!priv->is_rtl8187b) {
+		if (rfon) {
+			anaparam = RTL8187_RTL8225_ANAPARAM_ON;
+			anaparam2 = RTL8187_RTL8225_ANAPARAM2_ON;
+		} else {
+			anaparam = RTL8187_RTL8225_ANAPARAM_OFF;
+			anaparam2 = RTL8187_RTL8225_ANAPARAM2_OFF;
+		}
+	} else {
+		if (rfon) {
+			anaparam = RTL8187B_RTL8225_ANAPARAM_ON;
+			anaparam2 = RTL8187B_RTL8225_ANAPARAM2_ON;
+			anaparam3 = RTL8187B_RTL8225_ANAPARAM3_ON;
+		} else {
+			anaparam = RTL8187B_RTL8225_ANAPARAM_OFF;
+			anaparam2 = RTL8187B_RTL8225_ANAPARAM2_OFF;
+			anaparam3 = RTL8187B_RTL8225_ANAPARAM3_OFF;
+		}
+	}
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	reg |= RTL818X_CONFIG3_ANAPARAM_WRITE;
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
+	if (priv->is_rtl8187b)
+		rtl818x_iowrite8(priv, &priv->map->ANAPARAM3A, anaparam3);
+	reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_NORMAL);
+}
+
+static int rtl8187_cmd_reset(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u8 reg;
+	int i;
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg &= (1 << 1);
+	reg |= RTL818X_CMD_RESET;
+	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+	i = 10;
+	do {
+		msleep(2);
+		if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
+		      RTL818X_CMD_RESET))
+			break;
+	} while (--i);
+
+	if (!i) {
+		wiphy_err(dev->wiphy, "Reset timeout!\n");
+		return -ETIMEDOUT;
+	}
+
+	/* reload registers from eeprom */
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
+
+	i = 10;
+	do {
+		msleep(4);
+		if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
+		      RTL818X_EEPROM_CMD_CONFIG))
+			break;
+	} while (--i);
+
+	if (!i) {
+		wiphy_err(dev->wiphy, "eeprom reset timeout!\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int rtl8187_init_hw(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u8 reg;
+	int res;
+
+	/* reset */
+	rtl8187_set_anaparam(priv, true);
+
+	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+	msleep(200);
+	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
+	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
+	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
+	msleep(200);
+
+	res = rtl8187_cmd_reset(dev);
+	if (res)
+		return res;
+
+	rtl8187_set_anaparam(priv, true);
+
+	/* setup card */
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
+	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
+	rtl818x_iowrite8(priv, &priv->map->GPIO0, 1);
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+
+	rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
+	reg &= 0x3F;
+	reg |= 0x80;
+	rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+	rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
+	rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0);
+
+	// TODO: set RESP_RATE and BRSR properly
+	rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
+	rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+
+	/* host_usb_init */
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
+	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
+	reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
+	rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
+	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x20);
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
+	msleep(100);
+
+	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
+	rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
+	rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_CONFIG);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_NORMAL);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
+	msleep(100);
+
+	priv->rf->init(dev);
+
+	rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+	reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
+	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
+	rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
+	rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
+	rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
+	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+
+	return 0;
+}
+
+static const u8 rtl8187b_reg_table[][3] = {
+	{0xF0, 0x32, 0}, {0xF1, 0x32, 0}, {0xF2, 0x00, 0}, {0xF3, 0x00, 0},
+	{0xF4, 0x32, 0}, {0xF5, 0x43, 0}, {0xF6, 0x00, 0}, {0xF7, 0x00, 0},
+	{0xF8, 0x46, 0}, {0xF9, 0xA4, 0}, {0xFA, 0x00, 0}, {0xFB, 0x00, 0},
+	{0xFC, 0x96, 0}, {0xFD, 0xA4, 0}, {0xFE, 0x00, 0}, {0xFF, 0x00, 0},
+
+	{0x58, 0x4B, 1}, {0x59, 0x00, 1}, {0x5A, 0x4B, 1}, {0x5B, 0x00, 1},
+	{0x60, 0x4B, 1}, {0x61, 0x09, 1}, {0x62, 0x4B, 1}, {0x63, 0x09, 1},
+	{0xCE, 0x0F, 1}, {0xCF, 0x00, 1}, {0xF0, 0x4E, 1}, {0xF1, 0x01, 1},
+	{0xF2, 0x02, 1}, {0xF3, 0x03, 1}, {0xF4, 0x04, 1}, {0xF5, 0x05, 1},
+	{0xF6, 0x06, 1}, {0xF7, 0x07, 1}, {0xF8, 0x08, 1},
+
+	{0x4E, 0x00, 2}, {0x0C, 0x04, 2}, {0x21, 0x61, 2}, {0x22, 0x68, 2},
+	{0x23, 0x6F, 2}, {0x24, 0x76, 2}, {0x25, 0x7D, 2}, {0x26, 0x84, 2},
+	{0x27, 0x8D, 2}, {0x4D, 0x08, 2}, {0x50, 0x05, 2}, {0x51, 0xF5, 2},
+	{0x52, 0x04, 2}, {0x53, 0xA0, 2}, {0x54, 0x1F, 2}, {0x55, 0x23, 2},
+	{0x56, 0x45, 2}, {0x57, 0x67, 2}, {0x58, 0x08, 2}, {0x59, 0x08, 2},
+	{0x5A, 0x08, 2}, {0x5B, 0x08, 2}, {0x60, 0x08, 2}, {0x61, 0x08, 2},
+	{0x62, 0x08, 2}, {0x63, 0x08, 2}, {0x64, 0xCF, 2},
+
+	{0x5B, 0x40, 0}, {0x84, 0x88, 0}, {0x85, 0x24, 0}, {0x88, 0x54, 0},
+	{0x8B, 0xB8, 0}, {0x8C, 0x07, 0}, {0x8D, 0x00, 0}, {0x94, 0x1B, 0},
+	{0x95, 0x12, 0}, {0x96, 0x00, 0}, {0x97, 0x06, 0}, {0x9D, 0x1A, 0},
+	{0x9F, 0x10, 0}, {0xB4, 0x22, 0}, {0xBE, 0x80, 0}, {0xDB, 0x00, 0},
+	{0xEE, 0x00, 0}, {0x4C, 0x00, 2},
+
+	{0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0}, {0x8E, 0x08, 0},
+	{0x8F, 0x00, 0}
+};
+
+static int rtl8187b_init_hw(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	int res, i;
+	u8 reg;
+
+	rtl8187_set_anaparam(priv, true);
+
+	/* Reset PLL sequence on 8187B. Realtek note: reduces power
+	 * consumption about 30 mA */
+	rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10);
+	reg = rtl818x_ioread8(priv, (u8 *)0xFF62);
+	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5));
+	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5));
+
+	res = rtl8187_cmd_reset(dev);
+	if (res)
+		return res;
+
+	rtl8187_set_anaparam(priv, true);
+
+	/* BRSR (Basic Rate Set Register) on 8187B looks to be the same as
+	 * RESP_RATE on 8187L in Realtek sources: each bit should be each
+	 * one of the 12 rates, all are enabled */
+	rtl818x_iowrite16(priv, (__le16 *)0xFF34, 0x0FFF);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
+	reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
+	rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
+
+	/* Auto Rate Fallback Register (ARFR): 1M-54M setting */
+	rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1);
+	rtl818x_iowrite8_idx(priv, (u8 *)0xFFE2, 0x00, 1);
+
+	rtl818x_iowrite16_idx(priv, (__le16 *)0xFFD4, 0xFFFF, 1);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG1, (reg & 0x3F) | 0x80);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
+	for (i = 0; i < ARRAY_SIZE(rtl8187b_reg_table); i++) {
+		rtl818x_iowrite8_idx(priv,
+				     (u8 *)(uintptr_t)
+				     (rtl8187b_reg_table[i][0] | 0xFF00),
+				     rtl8187b_reg_table[i][1],
+				     rtl8187b_reg_table[i][2]);
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
+	rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
+
+	rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF0, 0, 1);
+	rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF4, 0, 1);
+	rtl818x_iowrite8_idx(priv, (u8 *)0xFFF8, 0, 1);
+
+	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00004001);
+
+	/* RFSW_CTRL register */
+	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x569A, 2);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+	msleep(100);
+
+	priv->rf->init(dev);
+
+	reg = RTL818X_CMD_TX_ENABLE | RTL818X_CMD_RX_ENABLE;
+	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+
+	rtl818x_iowrite8(priv, (u8 *)0xFE41, 0xF4);
+	rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x00);
+	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
+	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
+	rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x0F);
+	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
+	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
+
+	reg = rtl818x_ioread8(priv, (u8 *)0xFFDB);
+	rtl818x_iowrite8(priv, (u8 *)0xFFDB, reg | (1 << 2));
+	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x59FA, 3);
+	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF74, 0x59D2, 3);
+	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF76, 0x59D2, 3);
+	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF78, 0x19FA, 3);
+	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7A, 0x19FA, 3);
+	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7C, 0x00D0, 3);
+	rtl818x_iowrite8(priv, (u8 *)0xFF61, 0);
+	rtl818x_iowrite8_idx(priv, (u8 *)0xFF80, 0x0F, 1);
+	rtl818x_iowrite8_idx(priv, (u8 *)0xFF83, 0x03, 1);
+	rtl818x_iowrite8(priv, (u8 *)0xFFDA, 0x10);
+	rtl818x_iowrite8_idx(priv, (u8 *)0xFF4D, 0x08, 2);
+
+	rtl818x_iowrite32(priv, &priv->map->HSSI_PARA, 0x0600321B);
+
+	rtl818x_iowrite16_idx(priv, (__le16 *)0xFFEC, 0x0800, 1);
+
+	priv->slot_time = 0x9;
+	priv->aifsn[0] = 2; /* AIFSN[AC_VO] */
+	priv->aifsn[1] = 2; /* AIFSN[AC_VI] */
+	priv->aifsn[2] = 7; /* AIFSN[AC_BK] */
+	priv->aifsn[3] = 3; /* AIFSN[AC_BE] */
+	rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0);
+
+	/* ENEDCA flag must always be set, transmit issues? */
+	rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
+
+	return 0;
+}
+
+static void rtl8187_work(struct work_struct *work)
+{
+	/* The RTL8187 returns the retry count through register 0xFFFA. In
+	 * addition, it appears to be a cumulative retry count, not the
+	 * value for the current TX packet. When multiple TX entries are
+	 * waiting in the queue, the retry count will be the total for all.
+	 * The "error" may matter for purposes of rate setting, but there is
+	 * no other choice with this hardware.
+	 */
+	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+				    work.work);
+	struct ieee80211_tx_info *info;
+	struct ieee80211_hw *dev = priv->dev;
+	static u16 retry;
+	u16 tmp;
+	u16 avg_retry;
+	int length;
+
+	mutex_lock(&priv->conf_mutex);
+	tmp = rtl818x_ioread16(priv, (__le16 *)0xFFFA);
+	length = skb_queue_len(&priv->b_tx_status.queue);
+	if (unlikely(!length))
+		length = 1;
+	if (unlikely(tmp < retry))
+		tmp = retry;
+	avg_retry = (tmp - retry) / length;
+	while (skb_queue_len(&priv->b_tx_status.queue) > 0) {
+		struct sk_buff *old_skb;
+
+		old_skb = skb_dequeue(&priv->b_tx_status.queue);
+		info = IEEE80211_SKB_CB(old_skb);
+		info->status.rates[0].count = avg_retry + 1;
+		if (info->status.rates[0].count > RETRY_COUNT)
+			info->flags &= ~IEEE80211_TX_STAT_ACK;
+		ieee80211_tx_status_irqsafe(dev, old_skb);
+	}
+	retry = tmp;
+	mutex_unlock(&priv->conf_mutex);
+}
+
+static int rtl8187_start(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u32 reg;
+	int ret;
+
+	mutex_lock(&priv->conf_mutex);
+
+	ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) :
+				     rtl8187b_init_hw(dev);
+	if (ret)
+		goto rtl8187_start_exit;
+
+	init_usb_anchor(&priv->anchored);
+	priv->dev = dev;
+
+	if (priv->is_rtl8187b) {
+		reg = RTL818X_RX_CONF_MGMT |
+		      RTL818X_RX_CONF_DATA |
+		      RTL818X_RX_CONF_BROADCAST |
+		      RTL818X_RX_CONF_NICMAC |
+		      RTL818X_RX_CONF_BSSID |
+		      (7 << 13 /* RX FIFO threshold NONE */) |
+		      (7 << 10 /* MAX RX DMA */) |
+		      RTL818X_RX_CONF_RX_AUTORESETPHY |
+		      RTL818X_RX_CONF_ONLYERLPKT;
+		priv->rx_conf = reg;
+		rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
+
+		reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
+		reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
+		rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
+
+		rtl818x_iowrite32(priv, &priv->map->TX_CONF,
+				  RTL818X_TX_CONF_HW_SEQNUM |
+				  RTL818X_TX_CONF_DISREQQSIZE |
+				  (RETRY_COUNT << 8  /* short retry limit */) |
+				  (RETRY_COUNT << 0  /* long retry limit */) |
+				  (7 << 21 /* MAX TX DMA */));
+		ret = rtl8187_init_urbs(dev);
+		if (ret)
+			goto rtl8187_start_exit;
+		ret = rtl8187b_init_status_urb(dev);
+		if (ret)
+			usb_kill_anchored_urbs(&priv->anchored);
+		goto rtl8187_start_exit;
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+
+	rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
+	rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
+
+	ret = rtl8187_init_urbs(dev);
+	if (ret)
+		goto rtl8187_start_exit;
+
+	reg = RTL818X_RX_CONF_ONLYERLPKT |
+	      RTL818X_RX_CONF_RX_AUTORESETPHY |
+	      RTL818X_RX_CONF_BSSID |
+	      RTL818X_RX_CONF_MGMT |
+	      RTL818X_RX_CONF_DATA |
+	      (7 << 13 /* RX FIFO threshold NONE */) |
+	      (7 << 10 /* MAX RX DMA */) |
+	      RTL818X_RX_CONF_BROADCAST |
+	      RTL818X_RX_CONF_NICMAC;
+
+	priv->rx_conf = reg;
+	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
+	reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
+	reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
+	rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
+
+	reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
+	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
+	reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
+	rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
+
+	reg  = RTL818X_TX_CONF_CW_MIN |
+	       (7 << 21 /* MAX TX DMA */) |
+	       RTL818X_TX_CONF_NO_ICV;
+	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg |= RTL818X_CMD_TX_ENABLE;
+	reg |= RTL818X_CMD_RX_ENABLE;
+	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+	INIT_DELAYED_WORK(&priv->work, rtl8187_work);
+
+rtl8187_start_exit:
+	mutex_unlock(&priv->conf_mutex);
+	return ret;
+}
+
+static void rtl8187_stop(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	struct sk_buff *skb;
+	u32 reg;
+
+	mutex_lock(&priv->conf_mutex);
+	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg &= ~RTL818X_CMD_TX_ENABLE;
+	reg &= ~RTL818X_CMD_RX_ENABLE;
+	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+	priv->rf->stop(dev);
+	rtl8187_set_anaparam(priv, false);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	while ((skb = skb_dequeue(&priv->b_tx_status.queue)))
+		dev_kfree_skb_any(skb);
+
+	usb_kill_anchored_urbs(&priv->anchored);
+	mutex_unlock(&priv->conf_mutex);
+
+	if (!priv->is_rtl8187b)
+		cancel_delayed_work_sync(&priv->work);
+}
+
+static u64 rtl8187_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
+	       (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
+}
+
+
+static void rtl8187_beacon_work(struct work_struct *work)
+{
+	struct rtl8187_vif *vif_priv =
+		container_of(work, struct rtl8187_vif, beacon_work.work);
+	struct ieee80211_vif *vif =
+		container_of((void *)vif_priv, struct ieee80211_vif, drv_priv);
+	struct ieee80211_hw *dev = vif_priv->dev;
+	struct ieee80211_mgmt *mgmt;
+	struct sk_buff *skb;
+
+	/* don't overflow the tx ring */
+	if (ieee80211_queue_stopped(dev, 0))
+		goto resched;
+
+	/* grab a fresh beacon */
+	skb = ieee80211_beacon_get(dev, vif);
+	if (!skb)
+		goto resched;
+
+	/*
+	 * update beacon timestamp w/ TSF value
+	 * TODO: make hardware update beacon timestamp
+	 */
+	mgmt = (struct ieee80211_mgmt *)skb->data;
+	mgmt->u.beacon.timestamp = cpu_to_le64(rtl8187_get_tsf(dev, vif));
+
+	/* TODO: use actual beacon queue */
+	skb_set_queue_mapping(skb, 0);
+
+	rtl8187_tx(dev, NULL, skb);
+
+resched:
+	/*
+	 * schedule next beacon
+	 * TODO: use hardware support for beacon timing
+	 */
+	schedule_delayed_work(&vif_priv->beacon_work,
+			usecs_to_jiffies(1024 * vif->bss_conf.beacon_int));
+}
+
+
+static int rtl8187_add_interface(struct ieee80211_hw *dev,
+				 struct ieee80211_vif *vif)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	struct rtl8187_vif *vif_priv;
+	int i;
+	int ret = -EOPNOTSUPP;
+
+	mutex_lock(&priv->conf_mutex);
+	if (priv->vif)
+		goto exit;
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		break;
+	default:
+		goto exit;
+	}
+
+	ret = 0;
+	priv->vif = vif;
+
+	/* Initialize driver private area */
+	vif_priv = (struct rtl8187_vif *)&vif->drv_priv;
+	vif_priv->dev = dev;
+	INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8187_beacon_work);
+	vif_priv->enable_beacon = false;
+
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	for (i = 0; i < ETH_ALEN; i++)
+		rtl818x_iowrite8(priv, &priv->map->MAC[i],
+				 ((u8 *)vif->addr)[i]);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+exit:
+	mutex_unlock(&priv->conf_mutex);
+	return ret;
+}
+
+static void rtl8187_remove_interface(struct ieee80211_hw *dev,
+				     struct ieee80211_vif *vif)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	mutex_lock(&priv->conf_mutex);
+	priv->vif = NULL;
+	mutex_unlock(&priv->conf_mutex);
+}
+
+static int rtl8187_config(struct ieee80211_hw *dev, u32 changed)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	struct ieee80211_conf *conf = &dev->conf;
+	u32 reg;
+
+	mutex_lock(&priv->conf_mutex);
+	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+	/* Enable TX loopback on MAC level to avoid TX during channel
+	 * changes, as this has be seen to causes problems and the
+	 * card will stop work until next reset
+	 */
+	rtl818x_iowrite32(priv, &priv->map->TX_CONF,
+			  reg | RTL818X_TX_CONF_LOOPBACK_MAC);
+	priv->rf->set_chan(dev, conf);
+	msleep(10);
+	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
+
+	rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
+	rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
+	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
+	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
+	mutex_unlock(&priv->conf_mutex);
+	return 0;
+}
+
+/*
+ * With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for
+ * example. Thus we have to use raw values for AC_*_PARAM register addresses.
+ */
+static __le32 *rtl8187b_ac_addr[4] = {
+	(__le32 *) 0xFFF0, /* AC_VO */
+	(__le32 *) 0xFFF4, /* AC_VI */
+	(__le32 *) 0xFFFC, /* AC_BK */
+	(__le32 *) 0xFFF8, /* AC_BE */
+};
+
+#define SIFS_TIME 0xa
+
+static void rtl8187_conf_erp(struct rtl8187_priv *priv, bool use_short_slot,
+			     bool use_short_preamble)
+{
+	if (priv->is_rtl8187b) {
+		u8 difs, eifs;
+		u16 ack_timeout;
+		int queue;
+
+		if (use_short_slot) {
+			priv->slot_time = 0x9;
+			difs = 0x1c;
+			eifs = 0x53;
+		} else {
+			priv->slot_time = 0x14;
+			difs = 0x32;
+			eifs = 0x5b;
+		}
+		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
+		rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time);
+		rtl818x_iowrite8(priv, &priv->map->DIFS, difs);
+
+		/*
+		 * BRSR+1 on 8187B is in fact EIFS register
+		 * Value in units of 4 us
+		 */
+		rtl818x_iowrite8(priv, (u8 *)&priv->map->BRSR + 1, eifs);
+
+		/*
+		 * For 8187B, CARRIER_SENSE_COUNTER is in fact ack timeout
+		 * register. In units of 4 us like eifs register
+		 * ack_timeout = ack duration + plcp + difs + preamble
+		 */
+		ack_timeout = 112 + 48 + difs;
+		if (use_short_preamble)
+			ack_timeout += 72;
+		else
+			ack_timeout += 144;
+		rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER,
+				 DIV_ROUND_UP(ack_timeout, 4));
+
+		for (queue = 0; queue < 4; queue++)
+			rtl818x_iowrite8(priv, (u8 *) rtl8187b_ac_addr[queue],
+					 priv->aifsn[queue] * priv->slot_time +
+					 SIFS_TIME);
+	} else {
+		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
+		if (use_short_slot) {
+			rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
+			rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
+			rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
+		} else {
+			rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
+			rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
+			rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
+		}
+	}
+}
+
+static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_bss_conf *info,
+				     u32 changed)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	struct rtl8187_vif *vif_priv;
+	int i;
+	u8 reg;
+
+	vif_priv = (struct rtl8187_vif *)&vif->drv_priv;
+
+	if (changed & BSS_CHANGED_BSSID) {
+		mutex_lock(&priv->conf_mutex);
+		for (i = 0; i < ETH_ALEN; i++)
+			rtl818x_iowrite8(priv, &priv->map->BSSID[i],
+					 info->bssid[i]);
+
+		if (priv->is_rtl8187b)
+			reg = RTL818X_MSR_ENEDCA;
+		else
+			reg = 0;
+
+		if (is_valid_ether_addr(info->bssid)) {
+			if (vif->type == NL80211_IFTYPE_ADHOC)
+				reg |= RTL818X_MSR_ADHOC;
+			else
+				reg |= RTL818X_MSR_INFRA;
+		}
+		else
+			reg |= RTL818X_MSR_NO_LINK;
+
+		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
+
+		mutex_unlock(&priv->conf_mutex);
+	}
+
+	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE))
+		rtl8187_conf_erp(priv, info->use_short_slot,
+				 info->use_short_preamble);
+
+	if (changed & BSS_CHANGED_BEACON_ENABLED)
+		vif_priv->enable_beacon = info->enable_beacon;
+
+	if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) {
+		cancel_delayed_work_sync(&vif_priv->beacon_work);
+		if (vif_priv->enable_beacon)
+			schedule_work(&vif_priv->beacon_work.work);
+	}
+
+}
+
+static u64 rtl8187_prepare_multicast(struct ieee80211_hw *dev,
+				     struct netdev_hw_addr_list *mc_list)
+{
+	return netdev_hw_addr_list_count(mc_list);
+}
+
+static void rtl8187_configure_filter(struct ieee80211_hw *dev,
+				     unsigned int changed_flags,
+				     unsigned int *total_flags,
+				     u64 multicast)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	if (changed_flags & FIF_FCSFAIL)
+		priv->rx_conf ^= RTL818X_RX_CONF_FCS;
+	if (changed_flags & FIF_CONTROL)
+		priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
+	if (*total_flags & FIF_OTHER_BSS ||
+	    *total_flags & FIF_ALLMULTI || multicast > 0)
+		priv->rx_conf |= RTL818X_RX_CONF_MONITOR;
+	else
+		priv->rx_conf &= ~RTL818X_RX_CONF_MONITOR;
+
+	*total_flags = 0;
+
+	if (priv->rx_conf & RTL818X_RX_CONF_FCS)
+		*total_flags |= FIF_FCSFAIL;
+	if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
+		*total_flags |= FIF_CONTROL;
+	if (priv->rx_conf & RTL818X_RX_CONF_MONITOR) {
+		*total_flags |= FIF_OTHER_BSS;
+		*total_flags |= FIF_ALLMULTI;
+	}
+
+	rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf);
+}
+
+static int rtl8187_conf_tx(struct ieee80211_hw *dev,
+			   struct ieee80211_vif *vif, u16 queue,
+			   const struct ieee80211_tx_queue_params *params)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u8 cw_min, cw_max;
+
+	if (queue > 3)
+		return -EINVAL;
+
+	cw_min = fls(params->cw_min);
+	cw_max = fls(params->cw_max);
+
+	if (priv->is_rtl8187b) {
+		priv->aifsn[queue] = params->aifs;
+
+		/*
+		 * This is the structure of AC_*_PARAM registers in 8187B:
+		 * - TXOP limit field, bit offset = 16
+		 * - ECWmax, bit offset = 12
+		 * - ECWmin, bit offset = 8
+		 * - AIFS, bit offset = 0
+		 */
+		rtl818x_iowrite32(priv, rtl8187b_ac_addr[queue],
+				  (params->txop << 16) | (cw_max << 12) |
+				  (cw_min << 8) | (params->aifs *
+				  priv->slot_time + SIFS_TIME));
+	} else {
+		if (queue != 0)
+			return -EINVAL;
+
+		rtl818x_iowrite8(priv, &priv->map->CW_VAL,
+				 cw_min | (cw_max << 4));
+	}
+	return 0;
+}
+
+
+static const struct ieee80211_ops rtl8187_ops = {
+	.tx			= rtl8187_tx,
+	.start			= rtl8187_start,
+	.stop			= rtl8187_stop,
+	.add_interface		= rtl8187_add_interface,
+	.remove_interface	= rtl8187_remove_interface,
+	.config			= rtl8187_config,
+	.bss_info_changed	= rtl8187_bss_info_changed,
+	.prepare_multicast	= rtl8187_prepare_multicast,
+	.configure_filter	= rtl8187_configure_filter,
+	.conf_tx		= rtl8187_conf_tx,
+	.rfkill_poll		= rtl8187_rfkill_poll,
+	.get_tsf		= rtl8187_get_tsf,
+};
+
+static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
+{
+	struct ieee80211_hw *dev = eeprom->data;
+	struct rtl8187_priv *priv = dev->priv;
+	u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+
+	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
+	eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
+	eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
+	eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
+}
+
+static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom)
+{
+	struct ieee80211_hw *dev = eeprom->data;
+	struct rtl8187_priv *priv = dev->priv;
+	u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
+
+	if (eeprom->reg_data_in)
+		reg |= RTL818X_EEPROM_CMD_WRITE;
+	if (eeprom->reg_data_out)
+		reg |= RTL818X_EEPROM_CMD_READ;
+	if (eeprom->reg_data_clock)
+		reg |= RTL818X_EEPROM_CMD_CK;
+	if (eeprom->reg_chip_select)
+		reg |= RTL818X_EEPROM_CMD_CS;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
+	udelay(10);
+}
+
+static int rtl8187_probe(struct usb_interface *intf,
+				   const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct ieee80211_hw *dev;
+	struct rtl8187_priv *priv;
+	struct eeprom_93cx6 eeprom;
+	struct ieee80211_channel *channel;
+	const char *chip_name;
+	u16 txpwr, reg;
+	u16 product_id = le16_to_cpu(udev->descriptor.idProduct);
+	int err, i;
+	u8 mac_addr[ETH_ALEN];
+
+	dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
+	if (!dev) {
+		printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
+		return -ENOMEM;
+	}
+
+	priv = dev->priv;
+	priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B);
+
+	/* allocate "DMA aware" buffer for register accesses */
+	priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL);
+	if (!priv->io_dmabuf) {
+		err = -ENOMEM;
+		goto err_free_dev;
+	}
+	mutex_init(&priv->io_mutex);
+	mutex_init(&priv->conf_mutex);
+
+	SET_IEEE80211_DEV(dev, &intf->dev);
+	usb_set_intfdata(intf, dev);
+	priv->udev = udev;
+
+	usb_get_dev(udev);
+
+	skb_queue_head_init(&priv->rx_queue);
+
+	BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
+	BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
+
+	memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
+	memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
+	priv->map = (struct rtl818x_csr *)0xFF00;
+
+	priv->band.band = NL80211_BAND_2GHZ;
+	priv->band.channels = priv->channels;
+	priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
+	priv->band.bitrates = priv->rates;
+	priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
+	dev->wiphy->bands[NL80211_BAND_2GHZ] = &priv->band;
+
+
+	ieee80211_hw_set(dev, RX_INCLUDES_FCS);
+	ieee80211_hw_set(dev, HOST_BROADCAST_PS_BUFFERING);
+	ieee80211_hw_set(dev, SIGNAL_DBM);
+	/* Initialize rate-control variables */
+	dev->max_rates = 1;
+	dev->max_rate_tries = RETRY_COUNT;
+
+	eeprom.data = dev;
+	eeprom.register_read = rtl8187_eeprom_register_read;
+	eeprom.register_write = rtl8187_eeprom_register_write;
+	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
+		eeprom.width = PCI_EEPROM_WIDTH_93C66;
+	else
+		eeprom.width = PCI_EEPROM_WIDTH_93C46;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	udelay(10);
+
+	eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR,
+			       (__le16 __force *)mac_addr, 3);
+	if (!is_valid_ether_addr(mac_addr)) {
+		printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
+		       "generated MAC address\n");
+		eth_random_addr(mac_addr);
+	}
+	SET_IEEE80211_PERM_ADDR(dev, mac_addr);
+
+	channel = priv->channels;
+	for (i = 0; i < 3; i++) {
+		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i,
+				  &txpwr);
+		(*channel++).hw_value = txpwr & 0xFF;
+		(*channel++).hw_value = txpwr >> 8;
+	}
+	for (i = 0; i < 2; i++) {
+		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i,
+				  &txpwr);
+		(*channel++).hw_value = txpwr & 0xFF;
+		(*channel++).hw_value = txpwr >> 8;
+	}
+
+	eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
+			  &priv->txpwr_base);
+
+	reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
+	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
+	/* 0 means asic B-cut, we should use SW 3 wire
+	 * bit-by-bit banging for radio. 1 means we can use
+	 * USB specific request to write radio registers */
+	priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
+	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	if (!priv->is_rtl8187b) {
+		u32 reg32;
+		reg32 = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+		reg32 &= RTL818X_TX_CONF_HWVER_MASK;
+		switch (reg32) {
+		case RTL818X_TX_CONF_R8187vD_B:
+			/* Some RTL8187B devices have a USB ID of 0x8187
+			 * detect them here */
+			chip_name = "RTL8187BvB(early)";
+			priv->is_rtl8187b = 1;
+			priv->hw_rev = RTL8187BvB;
+			break;
+		case RTL818X_TX_CONF_R8187vD:
+			chip_name = "RTL8187vD";
+			break;
+		default:
+			chip_name = "RTL8187vB (default)";
+		}
+       } else {
+		/*
+		 * Force USB request to write radio registers for 8187B, Realtek
+		 * only uses it in their sources
+		 */
+		/*if (priv->asic_rev == 0) {
+			printk(KERN_WARNING "rtl8187: Forcing use of USB "
+			       "requests to write to radio registers\n");
+			priv->asic_rev = 1;
+		}*/
+		switch (rtl818x_ioread8(priv, (u8 *)0xFFE1)) {
+		case RTL818X_R8187B_B:
+			chip_name = "RTL8187BvB";
+			priv->hw_rev = RTL8187BvB;
+			break;
+		case RTL818X_R8187B_D:
+			chip_name = "RTL8187BvD";
+			priv->hw_rev = RTL8187BvD;
+			break;
+		case RTL818X_R8187B_E:
+			chip_name = "RTL8187BvE";
+			priv->hw_rev = RTL8187BvE;
+			break;
+		default:
+			chip_name = "RTL8187BvB (default)";
+			priv->hw_rev = RTL8187BvB;
+		}
+	}
+
+	if (!priv->is_rtl8187b) {
+		for (i = 0; i < 2; i++) {
+			eeprom_93cx6_read(&eeprom,
+					  RTL8187_EEPROM_TXPWR_CHAN_6 + i,
+					  &txpwr);
+			(*channel++).hw_value = txpwr & 0xFF;
+			(*channel++).hw_value = txpwr >> 8;
+		}
+	} else {
+		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6,
+				  &txpwr);
+		(*channel++).hw_value = txpwr & 0xFF;
+
+		eeprom_93cx6_read(&eeprom, 0x0A, &txpwr);
+		(*channel++).hw_value = txpwr & 0xFF;
+
+		eeprom_93cx6_read(&eeprom, 0x1C, &txpwr);
+		(*channel++).hw_value = txpwr & 0xFF;
+		(*channel++).hw_value = txpwr >> 8;
+	}
+	/* Handle the differing rfkill GPIO bit in different models */
+	priv->rfkill_mask = RFKILL_MASK_8187_89_97;
+	if (product_id == 0x8197 || product_id == 0x8198) {
+		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_SELECT_GPIO, &reg);
+		if (reg & 0xFF00)
+			priv->rfkill_mask = RFKILL_MASK_8198;
+	}
+	dev->vif_data_size = sizeof(struct rtl8187_vif);
+	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+				      BIT(NL80211_IFTYPE_ADHOC) ;
+
+	wiphy_ext_feature_set(dev->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+
+	if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
+		printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
+		       " info!\n");
+
+	priv->rf = rtl8187_detect_rf(dev);
+	dev->extra_tx_headroom = (!priv->is_rtl8187b) ?
+				  sizeof(struct rtl8187_tx_hdr) :
+				  sizeof(struct rtl8187b_tx_hdr);
+	if (!priv->is_rtl8187b)
+		dev->queues = 1;
+	else
+		dev->queues = 4;
+
+	err = ieee80211_register_hw(dev);
+	if (err) {
+		printk(KERN_ERR "rtl8187: Cannot register device\n");
+		goto err_free_dmabuf;
+	}
+	skb_queue_head_init(&priv->b_tx_status.queue);
+
+	wiphy_info(dev->wiphy, "hwaddr %pM, %s V%d + %s, rfkill mask %d\n",
+		   mac_addr, chip_name, priv->asic_rev, priv->rf->name,
+		   priv->rfkill_mask);
+
+#ifdef CONFIG_RTL8187_LEDS
+	eeprom_93cx6_read(&eeprom, 0x3F, &reg);
+	reg &= 0xFF;
+	rtl8187_leds_init(dev, reg);
+#endif
+	rtl8187_rfkill_init(dev);
+
+	return 0;
+
+ err_free_dmabuf:
+	kfree(priv->io_dmabuf);
+	usb_set_intfdata(intf, NULL);
+	usb_put_dev(udev);
+ err_free_dev:
+	ieee80211_free_hw(dev);
+	return err;
+}
+
+static void rtl8187_disconnect(struct usb_interface *intf)
+{
+	struct ieee80211_hw *dev = usb_get_intfdata(intf);
+	struct rtl8187_priv *priv;
+
+	if (!dev)
+		return;
+
+#ifdef CONFIG_RTL8187_LEDS
+	rtl8187_leds_exit(dev);
+#endif
+	rtl8187_rfkill_exit(dev);
+	ieee80211_unregister_hw(dev);
+
+	priv = dev->priv;
+	usb_reset_device(priv->udev);
+	usb_put_dev(interface_to_usbdev(intf));
+	kfree(priv->io_dmabuf);
+	ieee80211_free_hw(dev);
+}
+
+static struct usb_driver rtl8187_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= rtl8187_table,
+	.probe		= rtl8187_probe,
+	.disconnect	= rtl8187_disconnect,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(rtl8187_driver);
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
new file mode 100644
index 000000000..c08954011
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
@@ -0,0 +1,245 @@
+/*
+ * Linux LED driver for RTL8187
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * Based on the LED handling in the r8187 driver, which is:
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifdef CONFIG_RTL8187_LEDS
+
+#include <net/mac80211.h>
+#include <linux/usb.h>
+#include <linux/eeprom_93cx6.h>
+
+#include "rtl8187.h"
+#include "leds.h"
+
+static void led_turn_on(struct work_struct *work)
+{
+	/* As this routine does read/write operations on the hardware, it must
+	 * be run from a work queue.
+	 */
+	u8 reg;
+	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+				    led_on.work);
+	struct rtl8187_led *led = &priv->led_tx;
+
+	/* Don't change the LED, when the device is down. */
+	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
+		return ;
+
+	/* Skip if the LED is not registered. */
+	if (!led->dev)
+		return;
+	mutex_lock(&priv->conf_mutex);
+	switch (led->ledpin) {
+	case LED_PIN_GPIO0:
+		rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
+		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00);
+		break;
+	case LED_PIN_LED0:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_LED1:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_HW:
+	default:
+		break;
+	}
+	mutex_unlock(&priv->conf_mutex);
+}
+
+static void led_turn_off(struct work_struct *work)
+{
+	/* As this routine does read/write operations on the hardware, it must
+	 * be run from a work queue.
+	 */
+	u8 reg;
+	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+				    led_off.work);
+	struct rtl8187_led *led = &priv->led_tx;
+
+	/* Don't change the LED, when the device is down. */
+	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
+		return ;
+
+	/* Skip if the LED is not registered. */
+	if (!led->dev)
+		return;
+	mutex_lock(&priv->conf_mutex);
+	switch (led->ledpin) {
+	case LED_PIN_GPIO0:
+		rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
+		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01);
+		break;
+	case LED_PIN_LED0:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_LED1:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_HW:
+	default:
+		break;
+	}
+	mutex_unlock(&priv->conf_mutex);
+}
+
+/* Callback from the LED subsystem. */
+static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
+				   enum led_brightness brightness)
+{
+	struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led,
+					       led_dev);
+	struct ieee80211_hw *hw = led->dev;
+	struct rtl8187_priv *priv;
+	static bool radio_on;
+
+	if (!hw)
+		return;
+	priv = hw->priv;
+	if (led->is_radio) {
+		if (brightness == LED_FULL) {
+			ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
+			radio_on = true;
+		} else if (radio_on) {
+			radio_on = false;
+			cancel_delayed_work(&priv->led_on);
+			ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
+		}
+	} else if (radio_on) {
+		if (brightness == LED_OFF) {
+			ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
+			/* The LED is off for 1/20 sec - it just blinks. */
+			ieee80211_queue_delayed_work(hw, &priv->led_on,
+						     HZ / 20);
+		} else
+			ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
+	}
+}
+
+static int rtl8187_register_led(struct ieee80211_hw *dev,
+				struct rtl8187_led *led, const char *name,
+				const char *default_trigger, u8 ledpin,
+				bool is_radio)
+{
+	int err;
+	struct rtl8187_priv *priv = dev->priv;
+
+	if (led->dev)
+		return -EEXIST;
+	if (!default_trigger)
+		return -EINVAL;
+	led->dev = dev;
+	led->ledpin = ledpin;
+	led->is_radio = is_radio;
+	strlcpy(led->name, name, sizeof(led->name));
+
+	led->led_dev.name = led->name;
+	led->led_dev.default_trigger = default_trigger;
+	led->led_dev.brightness_set = rtl8187_led_brightness_set;
+
+	err = led_classdev_register(&priv->udev->dev, &led->led_dev);
+	if (err) {
+		printk(KERN_INFO "LEDs: Failed to register %s\n", name);
+		led->dev = NULL;
+		return err;
+	}
+	return 0;
+}
+
+static void rtl8187_unregister_led(struct rtl8187_led *led)
+{
+	struct ieee80211_hw *hw = led->dev;
+	struct rtl8187_priv *priv = hw->priv;
+
+	led_classdev_unregister(&led->led_dev);
+	flush_delayed_work(&priv->led_off);
+	led->dev = NULL;
+}
+
+void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	char name[RTL8187_LED_MAX_NAME_LEN + 1];
+	u8 ledpin;
+	int err;
+
+	/* According to the vendor driver, the LED operation depends on the
+	 * customer ID encoded in the EEPROM
+	 */
+	printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid);
+	switch (custid) {
+	case EEPROM_CID_RSVD0:
+	case EEPROM_CID_RSVD1:
+	case EEPROM_CID_SERCOMM_PS:
+	case EEPROM_CID_QMI:
+	case EEPROM_CID_DELL:
+	case EEPROM_CID_TOSHIBA:
+		ledpin = LED_PIN_GPIO0;
+		break;
+	case EEPROM_CID_ALPHA0:
+		ledpin = LED_PIN_LED0;
+		break;
+	case EEPROM_CID_HW:
+		ledpin = LED_PIN_HW;
+		break;
+	default:
+		ledpin = LED_PIN_GPIO0;
+	}
+
+	INIT_DELAYED_WORK(&priv->led_on, led_turn_on);
+	INIT_DELAYED_WORK(&priv->led_off, led_turn_off);
+
+	snprintf(name, sizeof(name),
+		 "rtl8187-%s::radio", wiphy_name(dev->wiphy));
+	err = rtl8187_register_led(dev, &priv->led_radio, name,
+			 ieee80211_get_radio_led_name(dev), ledpin, true);
+	if (err)
+		return;
+
+	snprintf(name, sizeof(name),
+		 "rtl8187-%s::tx", wiphy_name(dev->wiphy));
+	err = rtl8187_register_led(dev, &priv->led_tx, name,
+			 ieee80211_get_tx_led_name(dev), ledpin, false);
+	if (err)
+		goto err_tx;
+
+	snprintf(name, sizeof(name),
+		 "rtl8187-%s::rx", wiphy_name(dev->wiphy));
+	err = rtl8187_register_led(dev, &priv->led_rx, name,
+			 ieee80211_get_rx_led_name(dev), ledpin, false);
+	if (!err)
+		return;
+
+	/* registration of RX LED failed - unregister */
+	rtl8187_unregister_led(&priv->led_tx);
+err_tx:
+	rtl8187_unregister_led(&priv->led_radio);
+}
+
+void rtl8187_leds_exit(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	rtl8187_unregister_led(&priv->led_radio);
+	rtl8187_unregister_led(&priv->led_rx);
+	rtl8187_unregister_led(&priv->led_tx);
+	cancel_delayed_work_sync(&priv->led_off);
+	cancel_delayed_work_sync(&priv->led_on);
+}
+#endif /* def CONFIG_RTL8187_LEDS */
+
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.h b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.h
new file mode 100644
index 000000000..d743c96d4
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.h
@@ -0,0 +1,59 @@
+/*
+ * Definitions for RTL8187 leds
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * Based on the LED handling in the r8187 driver, which is:
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL8187_LED_H
+#define RTL8187_LED_H
+
+#ifdef CONFIG_RTL8187_LEDS
+
+#define RTL8187_LED_MAX_NAME_LEN	21
+
+#include <linux/leds.h>
+#include <linux/types.h>
+
+enum {
+	LED_PIN_LED0,
+	LED_PIN_LED1,
+	LED_PIN_GPIO0,
+	LED_PIN_HW
+};
+
+enum {
+	EEPROM_CID_RSVD0 = 0x00,
+	EEPROM_CID_RSVD1 = 0xFF,
+	EEPROM_CID_ALPHA0 = 0x01,
+	EEPROM_CID_SERCOMM_PS = 0x02,
+	EEPROM_CID_HW = 0x03,
+	EEPROM_CID_TOSHIBA = 0x04,
+	EEPROM_CID_QMI = 0x07,
+	EEPROM_CID_DELL = 0x08
+};
+
+struct rtl8187_led {
+	struct ieee80211_hw *dev;
+	/* The LED class device */
+	struct led_classdev led_dev;
+	/* The pin/method used to control the led */
+	u8 ledpin;
+	/* The unique name string for this LED device. */
+	char name[RTL8187_LED_MAX_NAME_LEN + 1];
+	/* If the LED is radio or tx/rx */
+	bool is_radio;
+};
+
+void rtl8187_leds_init(struct ieee80211_hw *dev, u16 code);
+void rtl8187_leds_exit(struct ieee80211_hw *dev);
+
+#endif /* def CONFIG_RTL8187_LEDS */
+
+#endif /* RTL8187_LED_H */
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.c
new file mode 100644
index 000000000..341167199
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.c
@@ -0,0 +1,64 @@
+/*
+ * Linux RFKILL support for RTL8187
+ *
+ * Copyright (c) 2009 Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * Based on the RFKILL handling in the r8187 driver, which is:
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <net/mac80211.h>
+
+#include "rtl8187.h"
+#include "rfkill.h"
+
+static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
+{
+	u8 gpio;
+
+	gpio = rtl818x_ioread8(priv, &priv->map->GPIO0);
+	rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~priv->rfkill_mask);
+	gpio = rtl818x_ioread8(priv, &priv->map->GPIO1);
+
+	return gpio & priv->rfkill_mask;
+}
+
+void rtl8187_rfkill_init(struct ieee80211_hw *hw)
+{
+	struct rtl8187_priv *priv = hw->priv;
+
+	priv->rfkill_off = rtl8187_is_radio_enabled(priv);
+	printk(KERN_INFO "rtl8187: wireless switch is %s\n",
+	       priv->rfkill_off ? "on" : "off");
+	wiphy_rfkill_set_hw_state(hw->wiphy, !priv->rfkill_off);
+	wiphy_rfkill_start_polling(hw->wiphy);
+}
+
+void rtl8187_rfkill_poll(struct ieee80211_hw *hw)
+{
+	bool enabled;
+	struct rtl8187_priv *priv = hw->priv;
+
+	mutex_lock(&priv->conf_mutex);
+	enabled = rtl8187_is_radio_enabled(priv);
+	if (unlikely(enabled != priv->rfkill_off)) {
+		priv->rfkill_off = enabled;
+		printk(KERN_INFO "rtl8187: wireless radio switch turned %s\n",
+		       enabled ? "on" : "off");
+		wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
+	}
+	mutex_unlock(&priv->conf_mutex);
+}
+
+void rtl8187_rfkill_exit(struct ieee80211_hw *hw)
+{
+	wiphy_rfkill_stop_polling(hw->wiphy);
+}
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.h b/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.h
new file mode 100644
index 000000000..c493e59ee
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef RTL8187_RFKILL_H
+#define RTL8187_RFKILL_H
+
+void rtl8187_rfkill_init(struct ieee80211_hw *hw);
+void rtl8187_rfkill_poll(struct ieee80211_hw *hw);
+void rtl8187_rfkill_exit(struct ieee80211_hw *hw);
+
+#endif /* RTL8187_RFKILL_H */
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.h b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.h
new file mode 100644
index 000000000..324451df9
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.h
@@ -0,0 +1,213 @@
+/*
+ * Definitions for RTL8187 hardware
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL8187_H
+#define RTL8187_H
+
+#include <linux/cache.h>
+
+#include "rtl818x.h"
+#include "leds.h"
+
+#define RTL8187_EEPROM_TXPWR_BASE	0x05
+#define RTL8187_EEPROM_MAC_ADDR		0x07
+#define RTL8187_EEPROM_TXPWR_CHAN_1	0x16	/* 3 channels */
+#define RTL8187_EEPROM_TXPWR_CHAN_6	0x1B	/* 2 channels */
+#define RTL8187_EEPROM_TXPWR_CHAN_4	0x3D	/* 2 channels */
+#define RTL8187_EEPROM_SELECT_GPIO	0x3B
+
+#define RTL8187_REQT_READ	0xC0
+#define RTL8187_REQT_WRITE	0x40
+#define RTL8187_REQ_GET_REG	0x05
+#define RTL8187_REQ_SET_REG	0x05
+
+#define RTL8187_MAX_RX		0x9C4
+
+#define RFKILL_MASK_8187_89_97	0x2
+#define RFKILL_MASK_8198	0x4
+
+#define RETRY_COUNT		7
+
+struct rtl8187_rx_info {
+	struct urb *urb;
+	struct ieee80211_hw *dev;
+};
+
+struct rtl8187_rx_hdr {
+	__le32 flags;
+	u8 noise;
+	u8 signal;
+	u8 agc;
+	u8 reserved;
+	__le64 mac_time;
+} __packed;
+
+struct rtl8187b_rx_hdr {
+	__le32 flags;
+	__le64 mac_time;
+	u8 sq;
+	u8 rssi;
+	u8 agc;
+	u8 flags2;
+	__le16 snr_long2end;
+	s8 pwdb_g12;
+	u8 fot;
+} __packed;
+
+/* {rtl8187,rtl8187b}_tx_info is in skb */
+
+struct rtl8187_tx_hdr {
+	__le32 flags;
+	__le16 rts_duration;
+	__le16 len;
+	__le32 retry;
+} __packed;
+
+struct rtl8187b_tx_hdr {
+	__le32 flags;
+	__le16 rts_duration;
+	__le16 len;
+	__le32 unused_1;
+	__le16 unused_2;
+	__le16 tx_duration;
+	__le32 unused_3;
+	__le32 retry;
+	__le32 unused_4[2];
+} __packed;
+
+enum {
+	DEVICE_RTL8187,
+	DEVICE_RTL8187B
+};
+
+struct rtl8187_vif {
+	struct ieee80211_hw *dev;
+
+	/* beaconing */
+	struct delayed_work beacon_work;
+	bool enable_beacon;
+};
+
+struct rtl8187_priv {
+	/* common between rtl818x drivers */
+	struct rtl818x_csr *map;
+	const struct rtl818x_rf_ops *rf;
+	struct ieee80211_vif *vif;
+
+	/* The mutex protects the TX loopback state.
+	 * Any attempt to set channels concurrently locks the device.
+	 */
+	struct mutex conf_mutex;
+
+	/* rtl8187 specific */
+	struct ieee80211_channel channels[14];
+	struct ieee80211_rate rates[12];
+	struct ieee80211_supported_band band;
+	struct usb_device *udev;
+	u32 rx_conf;
+	struct usb_anchor anchored;
+	struct delayed_work work;
+	struct ieee80211_hw *dev;
+#ifdef CONFIG_RTL8187_LEDS
+	struct rtl8187_led led_radio;
+	struct rtl8187_led led_tx;
+	struct rtl8187_led led_rx;
+	struct delayed_work led_on;
+	struct delayed_work led_off;
+#endif
+	u16 txpwr_base;
+	u8 asic_rev;
+	u8 is_rtl8187b;
+	enum {
+		RTL8187BvB,
+		RTL8187BvD,
+		RTL8187BvE
+	} hw_rev;
+	struct sk_buff_head rx_queue;
+	u8 signal;
+	u8 noise;
+	u8 slot_time;
+	u8 aifsn[4];
+	u8 rfkill_mask;
+	struct {
+		union {
+			__le64 buf;
+			u8 dummy1[L1_CACHE_BYTES];
+		} ____cacheline_aligned;
+		struct sk_buff_head queue;
+	} b_tx_status; /* This queue is used by both -b and non-b devices */
+	struct mutex io_mutex;
+	union {
+		u8 bits8;
+		__le16 bits16;
+		__le32 bits32;
+		u8 dummy2[L1_CACHE_BYTES];
+	} *io_dmabuf ____cacheline_aligned;
+	bool rfkill_off;
+	u16 seqno;
+};
+
+void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
+
+u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv,
+				u8 *addr, u8 idx);
+
+static inline u8 rtl818x_ioread8(struct rtl8187_priv *priv, u8 *addr)
+{
+	return rtl818x_ioread8_idx(priv, addr, 0);
+}
+
+u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv,
+				__le16 *addr, u8 idx);
+
+static inline u16 rtl818x_ioread16(struct rtl8187_priv *priv, __le16 *addr)
+{
+	return rtl818x_ioread16_idx(priv, addr, 0);
+}
+
+u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv,
+				__le32 *addr, u8 idx);
+
+static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr)
+{
+	return rtl818x_ioread32_idx(priv, addr, 0);
+}
+
+void rtl818x_iowrite8_idx(struct rtl8187_priv *priv,
+				u8 *addr, u8 val, u8 idx);
+
+static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val)
+{
+	rtl818x_iowrite8_idx(priv, addr, val, 0);
+}
+
+void rtl818x_iowrite16_idx(struct rtl8187_priv *priv,
+				__le16 *addr, u16 val, u8 idx);
+
+static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr,
+				     u16 val)
+{
+	rtl818x_iowrite16_idx(priv, addr, val, 0);
+}
+
+void rtl818x_iowrite32_idx(struct rtl8187_priv *priv,
+				__le32 *addr, u32 val, u8 idx);
+
+static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr,
+				     u32 val)
+{
+	rtl818x_iowrite32_idx(priv, addr, val, 0);
+}
+
+#endif /* RTL8187_H */
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
new file mode 100644
index 000000000..8ef6c2f97
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
@@ -0,0 +1,1051 @@
+/*
+ * Radio tuning for RTL8225 on RTL8187
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * Magic delays, register offsets, and phy value tables below are
+ * taken from the original r8187 driver sources.  Thanks to Realtek
+ * for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/usb.h>
+#include <net/mac80211.h>
+
+#include "rtl8187.h"
+#include "rtl8225.h"
+
+u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv,
+				u8 *addr, u8 idx)
+{
+	u8 val;
+
+	mutex_lock(&priv->io_mutex);
+	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits8, sizeof(val), 500);
+
+	val = priv->io_dmabuf->bits8;
+	mutex_unlock(&priv->io_mutex);
+
+	return val;
+}
+
+u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv,
+				__le16 *addr, u8 idx)
+{
+	__le16 val;
+
+	mutex_lock(&priv->io_mutex);
+	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits16, sizeof(val), 500);
+
+	val = priv->io_dmabuf->bits16;
+	mutex_unlock(&priv->io_mutex);
+
+	return le16_to_cpu(val);
+}
+
+u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv,
+				__le32 *addr, u8 idx)
+{
+	__le32 val;
+
+	mutex_lock(&priv->io_mutex);
+	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits32, sizeof(val), 500);
+
+	val = priv->io_dmabuf->bits32;
+	mutex_unlock(&priv->io_mutex);
+
+	return le32_to_cpu(val);
+}
+
+void rtl818x_iowrite8_idx(struct rtl8187_priv *priv,
+				u8 *addr, u8 val, u8 idx)
+{
+	mutex_lock(&priv->io_mutex);
+
+	priv->io_dmabuf->bits8 = val;
+	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits8, sizeof(val), 500);
+
+	mutex_unlock(&priv->io_mutex);
+}
+
+void rtl818x_iowrite16_idx(struct rtl8187_priv *priv,
+				__le16 *addr, u16 val, u8 idx)
+{
+	mutex_lock(&priv->io_mutex);
+
+	priv->io_dmabuf->bits16 = cpu_to_le16(val);
+	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits16, sizeof(val), 500);
+
+	mutex_unlock(&priv->io_mutex);
+}
+
+void rtl818x_iowrite32_idx(struct rtl8187_priv *priv,
+				__le32 *addr, u32 val, u8 idx)
+{
+	mutex_lock(&priv->io_mutex);
+
+	priv->io_dmabuf->bits32 = cpu_to_le32(val);
+	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits32, sizeof(val), 500);
+
+	mutex_unlock(&priv->io_mutex);
+}
+
+static void rtl8225_write_bitbang(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u16 reg80, reg84, reg82;
+	u32 bangdata;
+	int i;
+
+	bangdata = (data << 4) | (addr & 0xf);
+
+	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3;
+	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7);
+
+	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7);
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+	udelay(10);
+
+	for (i = 15; i >= 0; i--) {
+		u16 reg = reg80 | (bangdata & (1 << i)) >> i;
+
+		if (i & 1)
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+
+		if (!(i & 1))
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+}
+
+static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, __le16 data)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u16 reg80, reg82, reg84;
+
+	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
+	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+
+	reg80 &= ~(0x3 << 2);
+	reg84 &= ~0xF;
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x0007);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x0007);
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	udelay(2);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+	udelay(10);
+
+	mutex_lock(&priv->io_mutex);
+
+	priv->io_dmabuf->bits16 = data;
+	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+			addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data),
+			500);
+
+	mutex_unlock(&priv->io_mutex);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+}
+
+static void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	if (priv->asic_rev)
+		rtl8225_write_8051(dev, addr, cpu_to_le16(data));
+	else
+		rtl8225_write_bitbang(dev, addr, data);
+}
+
+static u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u16 reg80, reg82, reg84, out;
+	int i;
+
+	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
+	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+
+	reg80 &= ~0xF;
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	udelay(4);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+	udelay(5);
+
+	for (i = 4; i >= 0; i--) {
+		u16 reg = reg80 | ((addr >> i) & 1);
+
+		if (!(i & 1)) {
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+			udelay(1);
+		}
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg | (1 << 1));
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg | (1 << 1));
+		udelay(2);
+
+		if (i & 1) {
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+			udelay(1);
+		}
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3) | (1 << 1));
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3));
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3));
+	udelay(2);
+
+	out = 0;
+	for (i = 11; i >= 0; i--) {
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3));
+		udelay(1);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		udelay(2);
+
+		if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1))
+			out |= 1 << i;
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3));
+		udelay(2);
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3) | (1 << 2));
+	udelay(2);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0);
+
+	return out;
+}
+
+static const u16 rtl8225bcd_rxgain[] = {
+	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
+	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
+	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
+	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
+	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
+	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
+	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
+	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
+	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
+	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
+	0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
+	0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
+};
+
+static const u8 rtl8225_agc[] = {
+	0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
+	0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
+	0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
+	0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
+	0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
+	0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
+	0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
+	0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
+	0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
+	0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
+	0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
+	0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
+	0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
+};
+
+static const u8 rtl8225_gain[] = {
+	0x23, 0x88, 0x7c, 0xa5,	/* -82dBm */
+	0x23, 0x88, 0x7c, 0xb5,	/* -82dBm */
+	0x23, 0x88, 0x7c, 0xc5,	/* -82dBm */
+	0x33, 0x80, 0x79, 0xc5,	/* -78dBm */
+	0x43, 0x78, 0x76, 0xc5,	/* -74dBm */
+	0x53, 0x60, 0x73, 0xc5,	/* -70dBm */
+	0x63, 0x58, 0x70, 0xc5,	/* -66dBm */
+};
+
+static const u8 rtl8225_threshold[] = {
+	0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd
+};
+
+static const u8 rtl8225_tx_gain_cck_ofdm[] = {
+	0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
+};
+
+static const u8 rtl8225_tx_power_cck[] = {
+	0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
+	0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
+	0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
+	0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
+	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
+	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
+};
+
+static const u8 rtl8225_tx_power_cck_ch14[] = {
+	0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
+	0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
+	0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
+	0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
+	0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
+	0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225_tx_power_ofdm[] = {
+	0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
+};
+
+static const u32 rtl8225_chan[] = {
+	0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c,
+	0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72
+};
+
+static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u8 cck_power, ofdm_power;
+	const u8 *tmp;
+	u32 reg;
+	int i;
+
+	cck_power = priv->channels[channel - 1].hw_value & 0xF;
+	ofdm_power = priv->channels[channel - 1].hw_value >> 4;
+
+	cck_power = min(cck_power, (u8)11);
+	if (ofdm_power > (u8)15)
+		ofdm_power = 25;
+	else
+		ofdm_power += 10;
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+			 rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
+
+	if (channel == 14)
+		tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8];
+	else
+		tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8];
+
+	for (i = 0; i < 8; i++)
+		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+	msleep(1); // FIXME: optional?
+
+	/* anaparam2 on */
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+			reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
+			  RTL8187_RTL8225_ANAPARAM2_ON);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+			reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl8225_write_phy_ofdm(dev, 2, 0x42);
+	rtl8225_write_phy_ofdm(dev, 6, 0x00);
+	rtl8225_write_phy_ofdm(dev, 8, 0x00);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+			 rtl8225_tx_gain_cck_ofdm[ofdm_power / 6] >> 1);
+
+	tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6];
+
+	rtl8225_write_phy_ofdm(dev, 5, *tmp);
+	rtl8225_write_phy_ofdm(dev, 7, *tmp);
+
+	msleep(1);
+}
+
+static void rtl8225_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	int i;
+
+	rtl8225_write(dev, 0x0, 0x067);
+	rtl8225_write(dev, 0x1, 0xFE0);
+	rtl8225_write(dev, 0x2, 0x44D);
+	rtl8225_write(dev, 0x3, 0x441);
+	rtl8225_write(dev, 0x4, 0x486);
+	rtl8225_write(dev, 0x5, 0xBC0);
+	rtl8225_write(dev, 0x6, 0xAE6);
+	rtl8225_write(dev, 0x7, 0x82A);
+	rtl8225_write(dev, 0x8, 0x01F);
+	rtl8225_write(dev, 0x9, 0x334);
+	rtl8225_write(dev, 0xA, 0xFD4);
+	rtl8225_write(dev, 0xB, 0x391);
+	rtl8225_write(dev, 0xC, 0x050);
+	rtl8225_write(dev, 0xD, 0x6DB);
+	rtl8225_write(dev, 0xE, 0x029);
+	rtl8225_write(dev, 0xF, 0x914); msleep(100);
+
+	rtl8225_write(dev, 0x2, 0xC4D); msleep(200);
+	rtl8225_write(dev, 0x2, 0x44D); msleep(200);
+
+	if (!(rtl8225_read(dev, 6) & (1 << 7))) {
+		rtl8225_write(dev, 0x02, 0x0c4d);
+		msleep(200);
+		rtl8225_write(dev, 0x02, 0x044d);
+		msleep(100);
+		if (!(rtl8225_read(dev, 6) & (1 << 7)))
+			wiphy_warn(dev->wiphy, "RF Calibration Failed! %x\n",
+				   rtl8225_read(dev, 6));
+	}
+
+	rtl8225_write(dev, 0x0, 0x127);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) {
+		rtl8225_write(dev, 0x1, i + 1);
+		rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]);
+	}
+
+	rtl8225_write(dev, 0x0, 0x027);
+	rtl8225_write(dev, 0x0, 0x22F);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+	}
+
+	msleep(1);
+
+	rtl8225_write_phy_ofdm(dev, 0x00, 0x01);
+	rtl8225_write_phy_ofdm(dev, 0x01, 0x02);
+	rtl8225_write_phy_ofdm(dev, 0x02, 0x42);
+	rtl8225_write_phy_ofdm(dev, 0x03, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x04, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x05, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x06, 0x40);
+	rtl8225_write_phy_ofdm(dev, 0x07, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x08, 0x40);
+	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe);
+	rtl8225_write_phy_ofdm(dev, 0x0a, 0x09);
+	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80);
+	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01);
+	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3);
+	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38);
+	rtl8225_write_phy_ofdm(dev, 0x10, 0x84);
+	rtl8225_write_phy_ofdm(dev, 0x11, 0x06);
+	rtl8225_write_phy_ofdm(dev, 0x12, 0x20);
+	rtl8225_write_phy_ofdm(dev, 0x13, 0x20);
+	rtl8225_write_phy_ofdm(dev, 0x14, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x15, 0x40);
+	rtl8225_write_phy_ofdm(dev, 0x16, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x17, 0x40);
+	rtl8225_write_phy_ofdm(dev, 0x18, 0xef);
+	rtl8225_write_phy_ofdm(dev, 0x19, 0x19);
+	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20);
+	rtl8225_write_phy_ofdm(dev, 0x1b, 0x76);
+	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04);
+	rtl8225_write_phy_ofdm(dev, 0x1e, 0x95);
+	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75);
+	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f);
+	rtl8225_write_phy_ofdm(dev, 0x21, 0x27);
+	rtl8225_write_phy_ofdm(dev, 0x22, 0x16);
+	rtl8225_write_phy_ofdm(dev, 0x24, 0x46);
+	rtl8225_write_phy_ofdm(dev, 0x25, 0x20);
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90);
+	rtl8225_write_phy_ofdm(dev, 0x27, 0x88);
+
+	rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
+	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
+	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
+	rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
+
+	rtl8225_write_phy_cck(dev, 0x00, 0x98);
+	rtl8225_write_phy_cck(dev, 0x03, 0x20);
+	rtl8225_write_phy_cck(dev, 0x04, 0x7e);
+	rtl8225_write_phy_cck(dev, 0x05, 0x12);
+	rtl8225_write_phy_cck(dev, 0x06, 0xfc);
+	rtl8225_write_phy_cck(dev, 0x07, 0x78);
+	rtl8225_write_phy_cck(dev, 0x08, 0x2e);
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b);
+	rtl8225_write_phy_cck(dev, 0x11, 0x88);
+	rtl8225_write_phy_cck(dev, 0x12, 0x47);
+	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+	rtl8225_write_phy_cck(dev, 0x19, 0x00);
+	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+	rtl8225_write_phy_cck(dev, 0x40, 0x86);
+	rtl8225_write_phy_cck(dev, 0x41, 0x8d);
+	rtl8225_write_phy_cck(dev, 0x42, 0x15);
+	rtl8225_write_phy_cck(dev, 0x43, 0x18);
+	rtl8225_write_phy_cck(dev, 0x44, 0x1f);
+	rtl8225_write_phy_cck(dev, 0x45, 0x1e);
+	rtl8225_write_phy_cck(dev, 0x46, 0x1a);
+	rtl8225_write_phy_cck(dev, 0x47, 0x15);
+	rtl8225_write_phy_cck(dev, 0x48, 0x10);
+	rtl8225_write_phy_cck(dev, 0x49, 0x0a);
+	rtl8225_write_phy_cck(dev, 0x4a, 0x05);
+	rtl8225_write_phy_cck(dev, 0x4b, 0x02);
+	rtl8225_write_phy_cck(dev, 0x4c, 0x05);
+
+	rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D);
+
+	rtl8225_rf_set_tx_power(dev, 1);
+
+	/* RX antenna default to A */
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b);			/* B: 0xDB */
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90);		/* B: 0x10 */
+
+	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
+	msleep(1);
+	rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
+
+	/* set sensitivity */
+	rtl8225_write(dev, 0x0c, 0x50);
+	rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
+	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
+	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
+	rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
+	rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[2]);
+}
+
+static const u8 rtl8225z2_agc[] = {
+	0x5e, 0x5e, 0x5e, 0x5e, 0x5d, 0x5b, 0x59, 0x57, 0x55, 0x53, 0x51, 0x4f,
+	0x4d, 0x4b, 0x49, 0x47, 0x45, 0x43, 0x41, 0x3f, 0x3d, 0x3b, 0x39, 0x37,
+	0x35, 0x33, 0x31, 0x2f, 0x2d, 0x2b, 0x29, 0x27, 0x25, 0x23, 0x21, 0x1f,
+	0x1d, 0x1b, 0x19, 0x17, 0x15, 0x13, 0x11, 0x0f, 0x0d, 0x0b, 0x09, 0x07,
+	0x05, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19,
+	0x19, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x26, 0x27, 0x27, 0x28,
+	0x28, 0x29, 0x2a, 0x2a, 0x2a, 0x2b, 0x2b, 0x2b, 0x2c, 0x2c, 0x2c, 0x2d,
+	0x2d, 0x2d, 0x2d, 0x2e, 0x2e, 0x2e, 0x2e, 0x2f, 0x2f, 0x2f, 0x30, 0x30,
+	0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31,
+	0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31
+};
+static const u8 rtl8225z2_ofdm[] = {
+	0x10, 0x0d, 0x01, 0x00, 0x14, 0xfb, 0xfb, 0x60,
+	0x00, 0x60, 0x00, 0x00, 0x00, 0x5c, 0x00, 0x00,
+	0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xa8, 0x26,
+	0x32, 0x33, 0x07, 0xa5, 0x6f, 0x55, 0xc8, 0xb3,
+	0x0a, 0xe1, 0x2C, 0x8a, 0x86, 0x83, 0x34, 0x0f,
+	0x4f, 0x24, 0x6f, 0xc2, 0x6b, 0x40, 0x80, 0x00,
+	0xc0, 0xc1, 0x58, 0xf1, 0x00, 0xe4, 0x90, 0x3e,
+	0x6d, 0x3c, 0xfb, 0x07
+};
+
+static const u8 rtl8225z2_tx_power_cck_ch14[] = {
+	0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00,
+	0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00,
+	0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00,
+	0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225z2_tx_power_cck[] = {
+	0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04,
+	0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03,
+	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03,
+	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03
+};
+
+static const u8 rtl8225z2_tx_power_ofdm[] = {
+	0x42, 0x00, 0x40, 0x00, 0x40
+};
+
+static const u8 rtl8225z2_tx_gain_cck_ofdm[] = {
+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+	0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
+	0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
+	0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+	0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
+	0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23
+};
+
+static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u8 cck_power, ofdm_power;
+	const u8 *tmp;
+	u32 reg;
+	int i;
+
+	cck_power = priv->channels[channel - 1].hw_value & 0xF;
+	ofdm_power = priv->channels[channel - 1].hw_value >> 4;
+
+	cck_power = min(cck_power, (u8)15);
+	cck_power += priv->txpwr_base & 0xF;
+	cck_power = min(cck_power, (u8)35);
+
+	if (ofdm_power > (u8)15)
+		ofdm_power = 25;
+	else
+		ofdm_power += 10;
+	ofdm_power += priv->txpwr_base >> 4;
+	ofdm_power = min(ofdm_power, (u8)35);
+
+	if (channel == 14)
+		tmp = rtl8225z2_tx_power_cck_ch14;
+	else
+		tmp = rtl8225z2_tx_power_cck;
+
+	for (i = 0; i < 8; i++)
+		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+			 rtl8225z2_tx_gain_cck_ofdm[cck_power]);
+	msleep(1);
+
+	/* anaparam2 on */
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+			reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
+			  RTL8187_RTL8225_ANAPARAM2_ON);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+			reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl8225_write_phy_ofdm(dev, 2, 0x42);
+	rtl8225_write_phy_ofdm(dev, 5, 0x00);
+	rtl8225_write_phy_ofdm(dev, 6, 0x40);
+	rtl8225_write_phy_ofdm(dev, 7, 0x00);
+	rtl8225_write_phy_ofdm(dev, 8, 0x40);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+			 rtl8225z2_tx_gain_cck_ofdm[ofdm_power]);
+	msleep(1);
+}
+
+static void rtl8225z2_b_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u8 cck_power, ofdm_power;
+	const u8 *tmp;
+	int i;
+
+	cck_power = priv->channels[channel - 1].hw_value & 0xF;
+	ofdm_power = priv->channels[channel - 1].hw_value >> 4;
+
+	cck_power += (priv->hw_rev == RTL8187BvB) ? 0 : 7;
+	cck_power += priv->txpwr_base & 0xF;
+	cck_power = min(cck_power, (u8)35);
+
+	if (ofdm_power > 15)
+		ofdm_power = (priv->hw_rev == RTL8187BvB) ? 17 : 25;
+	else
+		ofdm_power += (priv->hw_rev == RTL8187BvB) ? 2 : 10;
+	ofdm_power += (priv->txpwr_base >> 4) & 0xF;
+	ofdm_power = min(ofdm_power, (u8)35);
+
+	if (channel == 14)
+		tmp = rtl8225z2_tx_power_cck_ch14;
+	else
+		tmp = rtl8225z2_tx_power_cck;
+
+	if (priv->hw_rev == RTL8187BvB) {
+		if (cck_power <= 6)
+			; /* do nothing */
+		else if (cck_power <= 11)
+			tmp += 8;
+		else
+			tmp += 16;
+	} else {
+		if (cck_power <= 5)
+			; /* do nothing */
+		else if (cck_power <= 11)
+			tmp += 8;
+		else if (cck_power <= 17)
+			tmp += 16;
+		else
+			tmp += 24;
+	}
+
+	for (i = 0; i < 8; i++)
+		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+			 rtl8225z2_tx_gain_cck_ofdm[cck_power] << 1);
+	msleep(1);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+			 rtl8225z2_tx_gain_cck_ofdm[ofdm_power] << 1);
+	if (priv->hw_rev == RTL8187BvB) {
+		if (ofdm_power <= 11) {
+			rtl8225_write_phy_ofdm(dev, 0x87, 0x60);
+			rtl8225_write_phy_ofdm(dev, 0x89, 0x60);
+		} else {
+			rtl8225_write_phy_ofdm(dev, 0x87, 0x5c);
+			rtl8225_write_phy_ofdm(dev, 0x89, 0x5c);
+		}
+	} else {
+		if (ofdm_power <= 11) {
+			rtl8225_write_phy_ofdm(dev, 0x87, 0x5c);
+			rtl8225_write_phy_ofdm(dev, 0x89, 0x5c);
+		} else if (ofdm_power <= 17) {
+			rtl8225_write_phy_ofdm(dev, 0x87, 0x54);
+			rtl8225_write_phy_ofdm(dev, 0x89, 0x54);
+		} else {
+			rtl8225_write_phy_ofdm(dev, 0x87, 0x50);
+			rtl8225_write_phy_ofdm(dev, 0x89, 0x50);
+		}
+	}
+	msleep(1);
+}
+
+static const u16 rtl8225z2_rxgain[] = {
+	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
+	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
+	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
+	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
+	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
+	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
+	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
+	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
+	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
+	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
+	0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
+	0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
+};
+
+static const u8 rtl8225z2_gain_bg[] = {
+	0x23, 0x15, 0xa5, /* -82-1dBm */
+	0x23, 0x15, 0xb5, /* -82-2dBm */
+	0x23, 0x15, 0xc5, /* -82-3dBm */
+	0x33, 0x15, 0xc5, /* -78dBm */
+	0x43, 0x15, 0xc5, /* -74dBm */
+	0x53, 0x15, 0xc5, /* -70dBm */
+	0x63, 0x15, 0xc5  /* -66dBm */
+};
+
+static void rtl8225z2_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	int i;
+
+	rtl8225_write(dev, 0x0, 0x2BF);
+	rtl8225_write(dev, 0x1, 0xEE0);
+	rtl8225_write(dev, 0x2, 0x44D);
+	rtl8225_write(dev, 0x3, 0x441);
+	rtl8225_write(dev, 0x4, 0x8C3);
+	rtl8225_write(dev, 0x5, 0xC72);
+	rtl8225_write(dev, 0x6, 0x0E6);
+	rtl8225_write(dev, 0x7, 0x82A);
+	rtl8225_write(dev, 0x8, 0x03F);
+	rtl8225_write(dev, 0x9, 0x335);
+	rtl8225_write(dev, 0xa, 0x9D4);
+	rtl8225_write(dev, 0xb, 0x7BB);
+	rtl8225_write(dev, 0xc, 0x850);
+	rtl8225_write(dev, 0xd, 0xCDF);
+	rtl8225_write(dev, 0xe, 0x02B);
+	rtl8225_write(dev, 0xf, 0x114);
+	msleep(100);
+
+	rtl8225_write(dev, 0x0, 0x1B7);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
+		rtl8225_write(dev, 0x1, i + 1);
+		rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
+	}
+
+	rtl8225_write(dev, 0x3, 0x080);
+	rtl8225_write(dev, 0x5, 0x004);
+	rtl8225_write(dev, 0x0, 0x0B7);
+	rtl8225_write(dev, 0x2, 0xc4D);
+
+	msleep(200);
+	rtl8225_write(dev, 0x2, 0x44D);
+	msleep(100);
+
+	if (!(rtl8225_read(dev, 6) & (1 << 7))) {
+		rtl8225_write(dev, 0x02, 0x0C4D);
+		msleep(200);
+		rtl8225_write(dev, 0x02, 0x044D);
+		msleep(100);
+		if (!(rtl8225_read(dev, 6) & (1 << 7)))
+			wiphy_warn(dev->wiphy, "RF Calibration Failed! %x\n",
+				   rtl8225_read(dev, 6));
+	}
+
+	msleep(200);
+
+	rtl8225_write(dev, 0x0, 0x2BF);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+	}
+
+	msleep(1);
+
+	rtl8225_write_phy_ofdm(dev, 0x00, 0x01);
+	rtl8225_write_phy_ofdm(dev, 0x01, 0x02);
+	rtl8225_write_phy_ofdm(dev, 0x02, 0x42);
+	rtl8225_write_phy_ofdm(dev, 0x03, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x04, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x05, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x06, 0x40);
+	rtl8225_write_phy_ofdm(dev, 0x07, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x08, 0x40);
+	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe);
+	rtl8225_write_phy_ofdm(dev, 0x0a, 0x08);
+	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80);
+	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01);
+	rtl8225_write_phy_ofdm(dev, 0x0d, 0x43);
+	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3);
+	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38);
+	rtl8225_write_phy_ofdm(dev, 0x10, 0x84);
+	rtl8225_write_phy_ofdm(dev, 0x11, 0x07);
+	rtl8225_write_phy_ofdm(dev, 0x12, 0x20);
+	rtl8225_write_phy_ofdm(dev, 0x13, 0x20);
+	rtl8225_write_phy_ofdm(dev, 0x14, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x15, 0x40);
+	rtl8225_write_phy_ofdm(dev, 0x16, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x17, 0x40);
+	rtl8225_write_phy_ofdm(dev, 0x18, 0xef);
+	rtl8225_write_phy_ofdm(dev, 0x19, 0x19);
+	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20);
+	rtl8225_write_phy_ofdm(dev, 0x1b, 0x15);
+	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04);
+	rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5);
+	rtl8225_write_phy_ofdm(dev, 0x1e, 0x95);
+	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75);
+	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f);
+	rtl8225_write_phy_ofdm(dev, 0x21, 0x17);
+	rtl8225_write_phy_ofdm(dev, 0x22, 0x16);
+	rtl8225_write_phy_ofdm(dev, 0x23, 0x80);
+	rtl8225_write_phy_ofdm(dev, 0x24, 0x46);
+	rtl8225_write_phy_ofdm(dev, 0x25, 0x00);
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90);
+	rtl8225_write_phy_ofdm(dev, 0x27, 0x88);
+
+	rtl8225_write_phy_ofdm(dev, 0x0b, rtl8225z2_gain_bg[4 * 3]);
+	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225z2_gain_bg[4 * 3 + 1]);
+	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225z2_gain_bg[4 * 3 + 2]);
+	rtl8225_write_phy_ofdm(dev, 0x21, 0x37);
+
+	rtl8225_write_phy_cck(dev, 0x00, 0x98);
+	rtl8225_write_phy_cck(dev, 0x03, 0x20);
+	rtl8225_write_phy_cck(dev, 0x04, 0x7e);
+	rtl8225_write_phy_cck(dev, 0x05, 0x12);
+	rtl8225_write_phy_cck(dev, 0x06, 0xfc);
+	rtl8225_write_phy_cck(dev, 0x07, 0x78);
+	rtl8225_write_phy_cck(dev, 0x08, 0x2e);
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b);
+	rtl8225_write_phy_cck(dev, 0x11, 0x88);
+	rtl8225_write_phy_cck(dev, 0x12, 0x47);
+	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+	rtl8225_write_phy_cck(dev, 0x19, 0x00);
+	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+	rtl8225_write_phy_cck(dev, 0x40, 0x86);
+	rtl8225_write_phy_cck(dev, 0x41, 0x8d);
+	rtl8225_write_phy_cck(dev, 0x42, 0x15);
+	rtl8225_write_phy_cck(dev, 0x43, 0x18);
+	rtl8225_write_phy_cck(dev, 0x44, 0x36);
+	rtl8225_write_phy_cck(dev, 0x45, 0x35);
+	rtl8225_write_phy_cck(dev, 0x46, 0x2e);
+	rtl8225_write_phy_cck(dev, 0x47, 0x25);
+	rtl8225_write_phy_cck(dev, 0x48, 0x1c);
+	rtl8225_write_phy_cck(dev, 0x49, 0x12);
+	rtl8225_write_phy_cck(dev, 0x4a, 0x09);
+	rtl8225_write_phy_cck(dev, 0x4b, 0x04);
+	rtl8225_write_phy_cck(dev, 0x4c, 0x05);
+
+	rtl818x_iowrite8(priv, (u8 *)0xFF5B, 0x0D); msleep(1);
+
+	rtl8225z2_rf_set_tx_power(dev, 1);
+
+	/* RX antenna default to A */
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b);			/* B: 0xDB */
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90);		/* B: 0x10 */
+
+	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
+	msleep(1);
+	rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
+}
+
+static void rtl8225z2_b_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	int i;
+
+	rtl8225_write(dev, 0x0, 0x0B7);
+	rtl8225_write(dev, 0x1, 0xEE0);
+	rtl8225_write(dev, 0x2, 0x44D);
+	rtl8225_write(dev, 0x3, 0x441);
+	rtl8225_write(dev, 0x4, 0x8C3);
+	rtl8225_write(dev, 0x5, 0xC72);
+	rtl8225_write(dev, 0x6, 0x0E6);
+	rtl8225_write(dev, 0x7, 0x82A);
+	rtl8225_write(dev, 0x8, 0x03F);
+	rtl8225_write(dev, 0x9, 0x335);
+	rtl8225_write(dev, 0xa, 0x9D4);
+	rtl8225_write(dev, 0xb, 0x7BB);
+	rtl8225_write(dev, 0xc, 0x850);
+	rtl8225_write(dev, 0xd, 0xCDF);
+	rtl8225_write(dev, 0xe, 0x02B);
+	rtl8225_write(dev, 0xf, 0x114);
+
+	rtl8225_write(dev, 0x0, 0x1B7);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
+		rtl8225_write(dev, 0x1, i + 1);
+		rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
+	}
+
+	rtl8225_write(dev, 0x3, 0x080);
+	rtl8225_write(dev, 0x5, 0x004);
+	rtl8225_write(dev, 0x0, 0x0B7);
+
+	rtl8225_write(dev, 0x2, 0xC4D);
+
+	rtl8225_write(dev, 0x2, 0x44D);
+	rtl8225_write(dev, 0x0, 0x2BF);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 0x03);
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 0x07);
+	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
+
+	rtl8225_write_phy_ofdm(dev, 0x80, 0x12);
+	for (i = 0; i < ARRAY_SIZE(rtl8225z2_agc); i++) {
+		rtl8225_write_phy_ofdm(dev, 0xF, rtl8225z2_agc[i]);
+		rtl8225_write_phy_ofdm(dev, 0xE, 0x80 + i);
+		rtl8225_write_phy_ofdm(dev, 0xE, 0);
+	}
+	rtl8225_write_phy_ofdm(dev, 0x80, 0x10);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225z2_ofdm); i++)
+		rtl8225_write_phy_ofdm(dev, i, rtl8225z2_ofdm[i]);
+
+	rtl8225_write_phy_ofdm(dev, 0x97, 0x46);
+	rtl8225_write_phy_ofdm(dev, 0xa4, 0xb6);
+	rtl8225_write_phy_ofdm(dev, 0x85, 0xfc);
+	rtl8225_write_phy_cck(dev, 0xc1, 0x88);
+}
+
+static void rtl8225_rf_stop(struct ieee80211_hw *dev)
+{
+	rtl8225_write(dev, 0x4, 0x1f);
+}
+
+static void rtl8225_rf_set_channel(struct ieee80211_hw *dev,
+				   struct ieee80211_conf *conf)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	int chan =
+		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
+
+	if (priv->rf->init == rtl8225_rf_init)
+		rtl8225_rf_set_tx_power(dev, chan);
+	else if (priv->rf->init == rtl8225z2_rf_init)
+		rtl8225z2_rf_set_tx_power(dev, chan);
+	else
+		rtl8225z2_b_rf_set_tx_power(dev, chan);
+
+	rtl8225_write(dev, 0x7, rtl8225_chan[chan - 1]);
+	msleep(10);
+}
+
+static const struct rtl818x_rf_ops rtl8225_ops = {
+	.name		= "rtl8225",
+	.init		= rtl8225_rf_init,
+	.stop		= rtl8225_rf_stop,
+	.set_chan	= rtl8225_rf_set_channel
+};
+
+static const struct rtl818x_rf_ops rtl8225z2_ops = {
+	.name		= "rtl8225z2",
+	.init		= rtl8225z2_rf_init,
+	.stop		= rtl8225_rf_stop,
+	.set_chan	= rtl8225_rf_set_channel
+};
+
+static const struct rtl818x_rf_ops rtl8225z2_b_ops = {
+	.name		= "rtl8225z2",
+	.init		= rtl8225z2_b_rf_init,
+	.stop		= rtl8225_rf_stop,
+	.set_chan	= rtl8225_rf_set_channel
+};
+
+const struct rtl818x_rf_ops * rtl8187_detect_rf(struct ieee80211_hw *dev)
+{
+	u16 reg8, reg9;
+	struct rtl8187_priv *priv = dev->priv;
+
+	if (!priv->is_rtl8187b) {
+		rtl8225_write(dev, 0, 0x1B7);
+
+		reg8 = rtl8225_read(dev, 8);
+		reg9 = rtl8225_read(dev, 9);
+
+		rtl8225_write(dev, 0, 0x0B7);
+
+		if (reg8 != 0x588 || reg9 != 0x700)
+			return &rtl8225_ops;
+
+		return &rtl8225z2_ops;
+	} else
+		return &rtl8225z2_b_ops;
+}
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.h b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.h
new file mode 100644
index 000000000..141afb09a
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.h
@@ -0,0 +1,44 @@
+/*
+ * Radio tuning definitions for RTL8225 on RTL8187
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL8187_RTL8225_H
+#define RTL8187_RTL8225_H
+
+#define RTL8187_RTL8225_ANAPARAM_ON	0xa0000a59
+#define RTL8187_RTL8225_ANAPARAM2_ON	0x860c7312
+#define RTL8187_RTL8225_ANAPARAM_OFF	0xa00beb59
+#define RTL8187_RTL8225_ANAPARAM2_OFF	0x840dec11
+
+#define RTL8187B_RTL8225_ANAPARAM_ON	0x45090658
+#define RTL8187B_RTL8225_ANAPARAM2_ON	0x727f3f52
+#define RTL8187B_RTL8225_ANAPARAM3_ON	0x00
+#define RTL8187B_RTL8225_ANAPARAM_OFF	0x55480658
+#define RTL8187B_RTL8225_ANAPARAM2_OFF	0x72003f50
+#define RTL8187B_RTL8225_ANAPARAM3_OFF	0x00
+
+const struct rtl818x_rf_ops * rtl8187_detect_rf(struct ieee80211_hw *);
+
+static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev,
+					  u8 addr, u32 data)
+{
+	rtl8187_write_phy(dev, addr, data);
+}
+
+static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev,
+					 u8 addr, u32 data)
+{
+	rtl8187_write_phy(dev, addr, data | 0x10000);
+}
+
+#endif /* RTL8187_RTL8225_H */
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl818x.h b/drivers/net/wireless/realtek/rtl818x/rtl818x.h
new file mode 100644
index 000000000..7abef95d2
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl818x.h
@@ -0,0 +1,405 @@
+/*
+ * Definitions for RTL818x hardware
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL818X_H
+#define RTL818X_H
+
+struct rtl818x_csr {
+
+	u8	MAC[6];
+	u8	reserved_0[2];
+
+	union {
+		__le32	MAR[2];  /* 0x8 */
+
+		struct{ /* rtl8187se */
+			u8 rf_sw_config; /* 0x8 */
+			u8 reserved_01[3];
+			__le32 TMGDA; /* 0xc */
+		} __packed;
+	} __packed;
+
+	union { /*  0x10  */
+		struct {
+			u8	RX_FIFO_COUNT;
+			u8	reserved_1;
+			u8	TX_FIFO_COUNT;
+			u8	BQREQ;
+		} __packed;
+
+		__le32 TBKDA; /* for 8187se */
+	} __packed;
+
+	__le32 TBEDA; /* 0x14 - for rtl8187se */
+
+	__le32	TSFT[2];
+
+	union { /* 0x20 */
+		__le32	TLPDA;
+		__le32  TVIDA; /* for 8187se */
+	} __packed;
+
+	union { /* 0x24 */
+		__le32	TNPDA;
+		__le32  TVODA; /* for 8187se */
+	} __packed;
+
+	/* hi pri ring for all cards */
+	__le32	THPDA; /* 0x28 */
+
+	union { /* 0x2c */
+		struct {
+			u8 reserved_2a;
+			u8 EIFS_8187SE;
+		} __packed;
+
+		__le16	BRSR;
+	} __packed;
+
+	u8	BSSID[6]; /* 0x2e */
+
+	union { /* 0x34 */
+		struct {
+			u8 RESP_RATE;
+			u8 EIFS;
+		} __packed;
+		__le16 BRSR_8187SE;
+	} __packed;
+
+	u8	reserved_3[1]; /* 0x36 */
+	u8	CMD; /* 0x37 */
+#define RTL818X_CMD_TX_ENABLE		(1 << 2)
+#define RTL818X_CMD_RX_ENABLE		(1 << 3)
+#define RTL818X_CMD_RESET		(1 << 4)
+	u8	reserved_4[4]; /* 0x38 */
+	union {
+		struct {
+			__le16	INT_MASK;
+			__le16	INT_STATUS;
+		} __packed;
+
+		__le32	INT_STATUS_SE; /* 0x3c */
+	} __packed;
+/* status bits for rtl8187 and rtl8180/8185 */
+#define RTL818X_INT_RX_OK		(1 <<  0)
+#define RTL818X_INT_RX_ERR		(1 <<  1)
+#define RTL818X_INT_TXL_OK		(1 <<  2)
+#define RTL818X_INT_TXL_ERR		(1 <<  3)
+#define RTL818X_INT_RX_DU		(1 <<  4)
+#define RTL818X_INT_RX_FO		(1 <<  5)
+#define RTL818X_INT_TXN_OK		(1 <<  6)
+#define RTL818X_INT_TXN_ERR		(1 <<  7)
+#define RTL818X_INT_TXH_OK		(1 <<  8)
+#define RTL818X_INT_TXH_ERR		(1 <<  9)
+#define RTL818X_INT_TXB_OK		(1 << 10)
+#define RTL818X_INT_TXB_ERR		(1 << 11)
+#define RTL818X_INT_ATIM		(1 << 12)
+#define RTL818X_INT_BEACON		(1 << 13)
+#define RTL818X_INT_TIME_OUT		(1 << 14)
+#define RTL818X_INT_TX_FO		(1 << 15)
+/* status bits for rtl8187se */
+#define RTL818X_INT_SE_TIMER3		(1 <<  0)
+#define RTL818X_INT_SE_TIMER2		(1 <<  1)
+#define RTL818X_INT_SE_RQ0SOR		(1 <<  2)
+#define RTL818X_INT_SE_TXBED_OK		(1 <<  3)
+#define RTL818X_INT_SE_TXBED_ERR	(1 <<  4)
+#define RTL818X_INT_SE_TXBE_OK		(1 <<  5)
+#define RTL818X_INT_SE_TXBE_ERR		(1 <<  6)
+#define RTL818X_INT_SE_RX_OK		(1 <<  7)
+#define RTL818X_INT_SE_RX_ERR		(1 <<  8)
+#define RTL818X_INT_SE_TXL_OK		(1 <<  9)
+#define RTL818X_INT_SE_TXL_ERR		(1 << 10)
+#define RTL818X_INT_SE_RX_DU		(1 << 11)
+#define RTL818X_INT_SE_RX_FIFO		(1 << 12)
+#define RTL818X_INT_SE_TXN_OK		(1 << 13)
+#define RTL818X_INT_SE_TXN_ERR		(1 << 14)
+#define RTL818X_INT_SE_TXH_OK		(1 << 15)
+#define RTL818X_INT_SE_TXH_ERR		(1 << 16)
+#define RTL818X_INT_SE_TXB_OK		(1 << 17)
+#define RTL818X_INT_SE_TXB_ERR		(1 << 18)
+#define RTL818X_INT_SE_ATIM_TO		(1 << 19)
+#define RTL818X_INT_SE_BK_TO		(1 << 20)
+#define RTL818X_INT_SE_TIMER1		(1 << 21)
+#define RTL818X_INT_SE_TX_FIFO		(1 << 22)
+#define RTL818X_INT_SE_WAKEUP		(1 << 23)
+#define RTL818X_INT_SE_BK_DMA		(1 << 24)
+#define RTL818X_INT_SE_TMGD_OK		(1 << 30)
+	__le32	TX_CONF; /* 0x40 */
+#define RTL818X_TX_CONF_LOOPBACK_MAC	(1 << 17)
+#define RTL818X_TX_CONF_LOOPBACK_CONT	(3 << 17)
+#define RTL818X_TX_CONF_NO_ICV		(1 << 19)
+#define RTL818X_TX_CONF_DISCW		(1 << 20)
+#define RTL818X_TX_CONF_SAT_HWPLCP	(1 << 24)
+#define RTL818X_TX_CONF_R8180_ABCD	(2 << 25)
+#define RTL818X_TX_CONF_R8180_F		(3 << 25)
+#define RTL818X_TX_CONF_R8185_ABC	(4 << 25)
+#define RTL818X_TX_CONF_R8185_D		(5 << 25)
+#define RTL818X_TX_CONF_R8187vD		(5 << 25)
+#define RTL818X_TX_CONF_R8187vD_B	(6 << 25)
+#define RTL818X_TX_CONF_RTL8187SE	(6 << 25)
+#define RTL818X_TX_CONF_HWVER_MASK	(7 << 25)
+#define RTL818X_TX_CONF_DISREQQSIZE	(1 << 28)
+#define RTL818X_TX_CONF_PROBE_DTS	(1 << 29)
+#define RTL818X_TX_CONF_HW_SEQNUM	(1 << 30)
+#define RTL818X_TX_CONF_CW_MIN		(1 << 31)
+	__le32	RX_CONF;
+#define RTL818X_RX_CONF_MONITOR		(1 <<  0)
+#define RTL818X_RX_CONF_NICMAC		(1 <<  1)
+#define RTL818X_RX_CONF_MULTICAST	(1 <<  2)
+#define RTL818X_RX_CONF_BROADCAST	(1 <<  3)
+#define RTL818X_RX_CONF_FCS		(1 <<  5)
+#define RTL818X_RX_CONF_DATA		(1 << 18)
+#define RTL818X_RX_CONF_CTRL		(1 << 19)
+#define RTL818X_RX_CONF_MGMT		(1 << 20)
+#define RTL818X_RX_CONF_ADDR3		(1 << 21)
+#define RTL818X_RX_CONF_PM		(1 << 22)
+#define RTL818X_RX_CONF_BSSID		(1 << 23)
+#define RTL818X_RX_CONF_RX_AUTORESETPHY	(1 << 28)
+#define RTL818X_RX_CONF_CSDM1		(1 << 29)
+#define RTL818X_RX_CONF_CSDM2		(1 << 30)
+#define RTL818X_RX_CONF_ONLYERLPKT	(1 << 31)
+	__le32	INT_TIMEOUT;
+	__le32	TBDA;
+	u8	EEPROM_CMD;
+#define RTL818X_EEPROM_CMD_READ		(1 << 0)
+#define RTL818X_EEPROM_CMD_WRITE	(1 << 1)
+#define RTL818X_EEPROM_CMD_CK		(1 << 2)
+#define RTL818X_EEPROM_CMD_CS		(1 << 3)
+#define RTL818X_EEPROM_CMD_NORMAL	(0 << 6)
+#define RTL818X_EEPROM_CMD_LOAD		(1 << 6)
+#define RTL818X_EEPROM_CMD_PROGRAM	(2 << 6)
+#define RTL818X_EEPROM_CMD_CONFIG	(3 << 6)
+	u8	CONFIG0;
+	u8	CONFIG1;
+	u8	CONFIG2;
+#define RTL818X_CONFIG2_ANTENNA_DIV	(1 << 6)
+	__le32	ANAPARAM;
+	u8	MSR;
+#define RTL818X_MSR_NO_LINK		(0 << 2)
+#define RTL818X_MSR_ADHOC		(1 << 2)
+#define RTL818X_MSR_INFRA		(2 << 2)
+#define RTL818X_MSR_MASTER		(3 << 2)
+#define RTL818X_MSR_ENEDCA		(4 << 2)
+	u8	CONFIG3;
+#define RTL818X_CONFIG3_ANAPARAM_WRITE	(1 << 6)
+#define RTL818X_CONFIG3_GNT_SELECT	(1 << 7)
+	u8	CONFIG4;
+#define RTL818X_CONFIG4_POWEROFF	(1 << 6)
+#define RTL818X_CONFIG4_VCOOFF		(1 << 7)
+	u8	TESTR;
+	u8	reserved_9[2];
+	u8	PGSELECT;
+	u8	SECURITY;
+	__le32	ANAPARAM2;
+	u8	reserved_10[8];
+	__le32  IMR;		/* 0x6c	- Interrupt mask reg for 8187se */
+#define IMR_TMGDOK      ((1 << 30))
+#define IMR_DOT11HINT	((1 << 25))	/* 802.11h Measurement Interrupt */
+#define IMR_BCNDMAINT	((1 << 24))	/* Beacon DMA Interrupt */
+#define IMR_WAKEINT	((1 << 23))	/* Wake Up Interrupt */
+#define IMR_TXFOVW	((1 << 22))	/* Tx FIFO Overflow */
+#define IMR_TIMEOUT1	((1 << 21))	/* Time Out Interrupt 1 */
+#define IMR_BCNINT	((1 << 20))	/* Beacon Time out */
+#define IMR_ATIMINT	((1 << 19))	/* ATIM Time Out */
+#define IMR_TBDER	((1 << 18))	/* Tx Beacon Descriptor Error */
+#define IMR_TBDOK	((1 << 17))	/* Tx Beacon Descriptor OK */
+#define IMR_THPDER	((1 << 16))	/* Tx High Priority Descriptor Error */
+#define IMR_THPDOK	((1 << 15))	/* Tx High Priority Descriptor OK */
+#define IMR_TVODER	((1 << 14))	/* Tx AC_VO Descriptor Error Int */
+#define IMR_TVODOK	((1 << 13))	/* Tx AC_VO Descriptor OK Interrupt */
+#define IMR_FOVW	((1 << 12))	/* Rx FIFO Overflow Interrupt */
+#define IMR_RDU		((1 << 11))	/* Rx Descriptor Unavailable */
+#define IMR_TVIDER	((1 << 10))	/* Tx AC_VI Descriptor Error */
+#define IMR_TVIDOK	((1 << 9))	/* Tx AC_VI Descriptor OK Interrupt */
+#define IMR_RER		((1 << 8))	/* Rx Error Interrupt */
+#define IMR_ROK		((1 << 7))	/* Receive OK Interrupt */
+#define IMR_TBEDER	((1 << 6))	/* Tx AC_BE Descriptor Error */
+#define IMR_TBEDOK	((1 << 5))	/* Tx AC_BE Descriptor OK */
+#define IMR_TBKDER	((1 << 4))	/* Tx AC_BK Descriptor Error */
+#define IMR_TBKDOK	((1 << 3))	/* Tx AC_BK Descriptor OK */
+#define IMR_RQOSOK	((1 << 2))	/* Rx QoS OK Interrupt */
+#define IMR_TIMEOUT2	((1 << 1))	/* Time Out Interrupt 2 */
+#define IMR_TIMEOUT3	((1 << 0))	/* Time Out Interrupt 3 */
+	__le16	BEACON_INTERVAL; /* 0x70 */
+	__le16	ATIM_WND; /*  0x72 */
+	__le16	BEACON_INTERVAL_TIME; /*  0x74 */
+	__le16	ATIMTR_INTERVAL; /*  0x76 */
+	u8	PHY_DELAY; /*  0x78 */
+	u8	CARRIER_SENSE_COUNTER; /* 0x79 */
+	u8	reserved_11[2]; /* 0x7a */
+	u8	PHY[4]; /* 0x7c  */
+	__le16	RFPinsOutput; /* 0x80 */
+	__le16	RFPinsEnable; /* 0x82 */
+	__le16	RFPinsSelect; /* 0x84 */
+	__le16	RFPinsInput;  /* 0x86 */
+	__le32	RF_PARA; /*  0x88 */
+	__le32	RF_TIMING; /*  0x8c */
+	u8	GP_ENABLE; /*  0x90 */
+	u8	GPIO0; /*  0x91 */
+	u8	GPIO1; /*  0x92 */
+	u8	TPPOLL_STOP; /*  0x93 - rtl8187se only */
+#define RTL818x_TPPOLL_STOP_BQ			(1 << 7)
+#define RTL818x_TPPOLL_STOP_VI			(1 << 4)
+#define RTL818x_TPPOLL_STOP_VO			(1 << 5)
+#define RTL818x_TPPOLL_STOP_BE			(1 << 3)
+#define RTL818x_TPPOLL_STOP_BK			(1 << 2)
+#define RTL818x_TPPOLL_STOP_MG			(1 << 1)
+#define RTL818x_TPPOLL_STOP_HI			(1 << 6)
+
+	__le32	HSSI_PARA; /*  0x94 */
+	u8	reserved_13[4]; /* 0x98 */
+	u8	TX_AGC_CTL; /*  0x9c */
+#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN	(1 << 0)
+#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL	(1 << 1)
+#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT		(1 << 2)
+	u8	TX_GAIN_CCK;
+	u8	TX_GAIN_OFDM;
+	u8	TX_ANTENNA;
+	u8	reserved_14[16];
+	u8	WPA_CONF;
+	u8	reserved_15[3];
+	u8	SIFS;
+	u8	DIFS;
+	u8	SLOT;
+	u8	reserved_16[5];
+	u8	CW_CONF;
+#define RTL818X_CW_CONF_PERPACKET_CW	(1 << 0)
+#define RTL818X_CW_CONF_PERPACKET_RETRY	(1 << 1)
+	u8	CW_VAL;
+	u8	RATE_FALLBACK;
+#define RTL818X_RATE_FALLBACK_ENABLE	(1 << 7)
+	u8	ACM_CONTROL;
+	u8	reserved_17[24];
+	u8	CONFIG5;
+	u8	TX_DMA_POLLING;
+	u8	PHY_PR;
+	u8	reserved_18;
+	__le16	CWR;
+	u8	RETRY_CTR;
+	u8	reserved_19[3];
+	__le16	INT_MIG;
+/* RTL818X_R8187B_*: magic numbers from ioregisters */
+#define RTL818X_R8187B_B	0
+#define RTL818X_R8187B_D	1
+#define RTL818X_R8187B_E	2
+	__le32	RDSAR;
+	__le16	TID_AC_MAP;
+	u8	reserved_20[4];
+	union {
+		__le16	ANAPARAM3; /* 0xee */
+		u8	ANAPARAM3A; /* for rtl8187 */
+	};
+
+#define AC_PARAM_TXOP_LIMIT_SHIFT	16
+#define AC_PARAM_ECW_MAX_SHIFT		12
+#define AC_PARAM_ECW_MIN_SHIFT		8
+#define AC_PARAM_AIFS_SHIFT		0
+
+	__le32 AC_VO_PARAM; /* 0xf0 */
+
+	union { /* 0xf4 */
+		__le32 AC_VI_PARAM;
+		__le16 FEMR;
+	} __packed;
+
+	union{ /* 0xf8 */
+		__le32  AC_BE_PARAM; /* rtl8187se */
+		struct{
+			u8      reserved_21[2];
+			__le16	TALLY_CNT; /* 0xfa */
+		} __packed;
+	} __packed;
+
+	union {
+		u8	TALLY_SEL; /* 0xfc */
+		__le32  AC_BK_PARAM;
+
+	} __packed;
+
+} __packed;
+
+/* These are addresses with NON-standard usage.
+ * They have offsets very far from this struct.
+ * I don't like to introduce a ton of "reserved"..
+ * They are for RTL8187SE
+ */
+#define REG_ADDR1(addr)	((u8 __iomem *)priv->map + (addr))
+#define REG_ADDR2(addr)	((__le16 __iomem *)priv->map + ((addr) >> 1))
+#define REG_ADDR4(addr)	((__le32 __iomem *)priv->map + ((addr) >> 2))
+
+#define FEMR_SE		REG_ADDR2(0x1D4)
+#define ARFR		REG_ADDR2(0x1E0)
+#define RFSW_CTRL	REG_ADDR2(0x272)
+#define SW_3W_DB0	REG_ADDR2(0x274)
+#define SW_3W_DB0_4	REG_ADDR4(0x274)
+#define SW_3W_DB1	REG_ADDR2(0x278)
+#define SW_3W_DB1_4	REG_ADDR4(0x278)
+#define SW_3W_CMD1	REG_ADDR1(0x27D)
+#define PI_DATA_REG	REG_ADDR2(0x360)
+#define SI_DATA_REG     REG_ADDR2(0x362)
+
+struct rtl818x_rf_ops {
+	char *name;
+	void (*init)(struct ieee80211_hw *);
+	void (*stop)(struct ieee80211_hw *);
+	void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *);
+	u8 (*calc_rssi)(u8 agc, u8 sq);
+};
+
+/**
+ * enum rtl818x_tx_desc_flags - Tx/Rx flags are common between RTL818X chips
+ *
+ * @RTL818X_TX_DESC_FLAG_NO_ENC: Disable hardware based encryption.
+ * @RTL818X_TX_DESC_FLAG_TX_OK: TX frame was ACKed.
+ * @RTL818X_TX_DESC_FLAG_SPLCP: Use short preamble.
+ * @RTL818X_TX_DESC_FLAG_MOREFRAG: More fragments follow.
+ * @RTL818X_TX_DESC_FLAG_CTS: Use CTS-to-self protection.
+ * @RTL818X_TX_DESC_FLAG_RTS: Use RTS/CTS protection.
+ * @RTL818X_TX_DESC_FLAG_LS: Last segment of the frame.
+ * @RTL818X_TX_DESC_FLAG_FS: First segment of the frame.
+ */
+enum rtl818x_tx_desc_flags {
+	RTL818X_TX_DESC_FLAG_NO_ENC	= (1 << 15),
+	RTL818X_TX_DESC_FLAG_TX_OK	= (1 << 15),
+	RTL818X_TX_DESC_FLAG_SPLCP	= (1 << 16),
+	RTL818X_TX_DESC_FLAG_RX_UNDER	= (1 << 16),
+	RTL818X_TX_DESC_FLAG_MOREFRAG	= (1 << 17),
+	RTL818X_TX_DESC_FLAG_CTS	= (1 << 18),
+	RTL818X_TX_DESC_FLAG_RTS	= (1 << 23),
+	RTL818X_TX_DESC_FLAG_LS		= (1 << 28),
+	RTL818X_TX_DESC_FLAG_FS		= (1 << 29),
+	RTL818X_TX_DESC_FLAG_DMA	= (1 << 30),
+	RTL818X_TX_DESC_FLAG_OWN	= (1 << 31)
+};
+
+enum rtl818x_rx_desc_flags {
+	RTL818X_RX_DESC_FLAG_ICV_ERR	= (1 << 12),
+	RTL818X_RX_DESC_FLAG_CRC32_ERR	= (1 << 13),
+	RTL818X_RX_DESC_FLAG_PM		= (1 << 14),
+	RTL818X_RX_DESC_FLAG_RX_ERR	= (1 << 15),
+	RTL818X_RX_DESC_FLAG_BCAST	= (1 << 16),
+	RTL818X_RX_DESC_FLAG_PAM	= (1 << 17),
+	RTL818X_RX_DESC_FLAG_MCAST	= (1 << 18),
+	RTL818X_RX_DESC_FLAG_QOS	= (1 << 19), /* RTL8187(B) only */
+	RTL818X_RX_DESC_FLAG_TRSW	= (1 << 24), /* RTL8187(B) only */
+	RTL818X_RX_DESC_FLAG_SPLCP	= (1 << 25),
+	RTL818X_RX_DESC_FLAG_FOF	= (1 << 26),
+	RTL818X_RX_DESC_FLAG_DMA_FAIL	= (1 << 27),
+	RTL818X_RX_DESC_FLAG_LS		= (1 << 28),
+	RTL818X_RX_DESC_FLAG_FS		= (1 << 29),
+	RTL818X_RX_DESC_FLAG_EOR	= (1 << 30),
+	RTL818X_RX_DESC_FLAG_OWN	= (1 << 31)
+};
+
+#endif /* RTL818X_H */