Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

78 files changed, 26112 insertions, 0 deletions

diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
new file mode 100644
index 000000000..b065eb605
--- /dev/null
+++ b/drivers/nfc/Kconfig
@@ -0,0 +1,61 @@
+#
+# Near Field Communication (NFC) devices
+#
+
+menu "Near Field Communication (NFC) devices"
+	depends on NFC
+
+config NFC_TRF7970A
+	tristate "Texas Instruments TRF7970a NFC driver"
+	depends on SPI && NFC_DIGITAL && GPIOLIB
+	help
+	  This option enables the NFC driver for Texas Instruments' TRF7970a
+	  device. Such device supports 5 different protocols: ISO14443A,
+	  ISO14443B, FeLiCa, ISO15693 and ISO18000-3.
+
+	  Say Y here to compile support for TRF7970a into the kernel or
+	  say M  to compile it as a module. The module will be called
+	  trf7970a.ko.
+
+config NFC_MEI_PHY
+	tristate "MEI bus NFC device support"
+	depends on INTEL_MEI && NFC_HCI
+	help
+	  This adds support to use an mei bus nfc device. Select this if you
+	  will use an HCI NFC driver for an NFC chip connected behind an
+	  Intel's Management Engine chip.
+
+	  If unsure, say N.
+
+config NFC_SIM
+	tristate "NFC hardware simulator driver"
+	depends on NFC_DIGITAL
+	help
+	  This driver declares two virtual NFC devices supporting NFC-DEP
+	  protocol. An LLCP connection can be established between them and
+	  all packets sent from one device is sent back to the other, acting as
+	  loopback devices.
+
+	  If unsure, say N.
+
+config NFC_PORT100
+	tristate "Sony NFC Port-100 Series USB device support"
+	depends on USB
+	depends on NFC_DIGITAL
+	help
+	  This adds support for Sony Port-100 chip based USB devices such as the
+	  RC-S380 dongle.
+
+	  If unsure, say N.
+
+source "drivers/nfc/fdp/Kconfig"
+source "drivers/nfc/pn544/Kconfig"
+source "drivers/nfc/pn533/Kconfig"
+source "drivers/nfc/microread/Kconfig"
+source "drivers/nfc/nfcmrvl/Kconfig"
+source "drivers/nfc/st21nfca/Kconfig"
+source "drivers/nfc/st-nci/Kconfig"
+source "drivers/nfc/nxp-nci/Kconfig"
+source "drivers/nfc/s3fwrn5/Kconfig"
+source "drivers/nfc/st95hf/Kconfig"
+endmenu
diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile
new file mode 100644
index 000000000..5393ba59b
--- /dev/null
+++ b/drivers/nfc/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for nfc devices
+#
+
+obj-$(CONFIG_NFC_FDP)		+= fdp/
+obj-$(CONFIG_NFC_PN544)		+= pn544/
+obj-$(CONFIG_NFC_MICROREAD)	+= microread/
+obj-$(CONFIG_NFC_PN533)		+= pn533/
+obj-$(CONFIG_NFC_MEI_PHY)	+= mei_phy.o
+obj-$(CONFIG_NFC_SIM)		+= nfcsim.o
+obj-$(CONFIG_NFC_PORT100)	+= port100.o
+obj-$(CONFIG_NFC_MRVL)		+= nfcmrvl/
+obj-$(CONFIG_NFC_TRF7970A)	+= trf7970a.o
+obj-$(CONFIG_NFC_ST21NFCA)  	+= st21nfca/
+obj-$(CONFIG_NFC_ST_NCI)	+= st-nci/
+obj-$(CONFIG_NFC_NXP_NCI)	+= nxp-nci/
+obj-$(CONFIG_NFC_S3FWRN5)	+= s3fwrn5/
+obj-$(CONFIG_NFC_ST95HF)	+= st95hf/
diff --git a/drivers/nfc/fdp/Kconfig b/drivers/nfc/fdp/Kconfig
new file mode 100644
index 000000000..fbccd9dd8
--- /dev/null
+++ b/drivers/nfc/fdp/Kconfig
@@ -0,0 +1,23 @@
+config NFC_FDP
+	tristate "Intel FDP NFC driver"
+	depends on NFC_NCI
+	select CRC_CCITT
+	default n
+	---help---
+	  Intel Fields Peak NFC controller core driver.
+	  This is a driver based on the NCI NFC kernel layers.
+
+	  To compile this driver as a module, choose m here. The module will
+	  be called fdp.
+	  Say N if unsure.
+
+config NFC_FDP_I2C
+	tristate "NFC FDP i2c support"
+	depends on NFC_FDP && I2C
+	---help---
+	  This module adds support for the Intel Fields Peak NFC controller
+	  i2c interface.
+	  Select this if your platform is using the i2c bus.
+
+	  If you choose to build a module, it'll be called fdp_i2c.
+	  Say N if unsure.
diff --git a/drivers/nfc/fdp/Makefile b/drivers/nfc/fdp/Makefile
new file mode 100644
index 000000000..e79d51bde
--- /dev/null
+++ b/drivers/nfc/fdp/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for FDP NCI based NFC driver
+#
+
+obj-$(CONFIG_NFC_FDP)     += fdp.o
+obj-$(CONFIG_NFC_FDP_I2C) += fdp_i2c.o
+
+fdp_i2c-objs  = i2c.o
+
diff --git a/drivers/nfc/fdp/fdp.c b/drivers/nfc/fdp/fdp.c
new file mode 100644
index 000000000..954c83e91
--- /dev/null
+++ b/drivers/nfc/fdp/fdp.c
@@ -0,0 +1,809 @@
+/* -------------------------------------------------------------------------
+ * Copyright (C) 2014-2016, Intel Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ * -------------------------------------------------------------------------
+ */
+
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <net/nfc/nci_core.h>
+
+#include "fdp.h"
+
+#define FDP_OTP_PATCH_NAME			"otp.bin"
+#define FDP_RAM_PATCH_NAME			"ram.bin"
+#define FDP_FW_HEADER_SIZE			576
+#define FDP_FW_UPDATE_SLEEP			1000
+
+#define NCI_GET_VERSION_TIMEOUT			8000
+#define NCI_PATCH_REQUEST_TIMEOUT		8000
+#define FDP_PATCH_CONN_DEST			0xC2
+#define FDP_PATCH_CONN_PARAM_TYPE		0xA0
+
+#define NCI_PATCH_TYPE_RAM			0x00
+#define NCI_PATCH_TYPE_OTP			0x01
+#define NCI_PATCH_TYPE_EOT			0xFF
+
+#define NCI_PARAM_ID_FW_RAM_VERSION		0xA0
+#define NCI_PARAM_ID_FW_OTP_VERSION		0xA1
+#define NCI_PARAM_ID_OTP_LIMITED_VERSION	0xC5
+#define NCI_PARAM_ID_KEY_INDEX_ID		0xC6
+
+#define NCI_GID_PROP				0x0F
+#define NCI_OP_PROP_PATCH_OID			0x08
+#define NCI_OP_PROP_SET_PDATA_OID		0x23
+
+struct fdp_nci_info {
+	struct nfc_phy_ops *phy_ops;
+	struct fdp_i2c_phy *phy;
+	struct nci_dev *ndev;
+
+	const struct firmware *otp_patch;
+	const struct firmware *ram_patch;
+	u32 otp_patch_version;
+	u32 ram_patch_version;
+
+	u32 otp_version;
+	u32 ram_version;
+	u32 limited_otp_version;
+	u8 key_index;
+
+	u8 *fw_vsc_cfg;
+	u8 clock_type;
+	u32 clock_freq;
+
+	atomic_t data_pkt_counter;
+	void (*data_pkt_counter_cb)(struct nci_dev *ndev);
+	u8 setup_patch_sent;
+	u8 setup_patch_ntf;
+	u8 setup_patch_status;
+	u8 setup_reset_ntf;
+	wait_queue_head_t setup_wq;
+};
+
+static u8 nci_core_get_config_otp_ram_version[5] = {
+	0x04,
+	NCI_PARAM_ID_FW_RAM_VERSION,
+	NCI_PARAM_ID_FW_OTP_VERSION,
+	NCI_PARAM_ID_OTP_LIMITED_VERSION,
+	NCI_PARAM_ID_KEY_INDEX_ID
+};
+
+struct nci_core_get_config_rsp {
+	u8 status;
+	u8 count;
+	u8 data[0];
+};
+
+static int fdp_nci_create_conn(struct nci_dev *ndev)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct core_conn_create_dest_spec_params param;
+	int r;
+
+	/* proprietary destination specific paramerer without value */
+	param.type = FDP_PATCH_CONN_PARAM_TYPE;
+	param.length = 0x00;
+
+	r = nci_core_conn_create(info->ndev, FDP_PATCH_CONN_DEST, 1,
+				 sizeof(param), &param);
+	if (r)
+		return r;
+
+	return nci_get_conn_info_by_dest_type_params(ndev,
+						     FDP_PATCH_CONN_DEST, NULL);
+}
+
+static inline int fdp_nci_get_versions(struct nci_dev *ndev)
+{
+	return nci_core_cmd(ndev, NCI_OP_CORE_GET_CONFIG_CMD,
+			    sizeof(nci_core_get_config_otp_ram_version),
+			    (__u8 *) &nci_core_get_config_otp_ram_version);
+}
+
+static inline int fdp_nci_patch_cmd(struct nci_dev *ndev, u8 type)
+{
+	return nci_prop_cmd(ndev, NCI_OP_PROP_PATCH_OID, sizeof(type), &type);
+}
+
+static inline int fdp_nci_set_production_data(struct nci_dev *ndev, u8 len,
+					      char *data)
+{
+	return nci_prop_cmd(ndev, NCI_OP_PROP_SET_PDATA_OID, len, data);
+}
+
+static int fdp_nci_set_clock(struct nci_dev *ndev, u8 clock_type,
+			     u32 clock_freq)
+{
+	u32 fc = 13560;
+	u32 nd, num, delta;
+	char data[9];
+
+	nd = (24 * fc) / clock_freq;
+	delta = 24 * fc - nd * clock_freq;
+	num = (32768 * delta) / clock_freq;
+
+	data[0] = 0x00;
+	data[1] = 0x00;
+	data[2] = 0x00;
+
+	data[3] = 0x10;
+	data[4] = 0x04;
+	data[5] = num & 0xFF;
+	data[6] = (num >> 8) & 0xff;
+	data[7] = nd;
+	data[8] = clock_type;
+
+	return fdp_nci_set_production_data(ndev, 9, data);
+}
+
+static void fdp_nci_send_patch_cb(struct nci_dev *ndev)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+
+	info->setup_patch_sent = 1;
+	wake_up(&info->setup_wq);
+}
+
+/**
+ * Register a packet sent counter and a callback
+ *
+ * We have no other way of knowing when all firmware packets were sent out
+ * on the i2c bus. We need to know that in order to close the connection and
+ * send the patch end message.
+ */
+static void fdp_nci_set_data_pkt_counter(struct nci_dev *ndev,
+				  void (*cb)(struct nci_dev *ndev), int count)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+
+	dev_dbg(dev, "NCI data pkt counter %d\n", count);
+	atomic_set(&info->data_pkt_counter, count);
+	info->data_pkt_counter_cb = cb;
+}
+
+/**
+ * The device is expecting a stream of packets. All packets need to
+ * have the PBF flag set to 0x0 (last packet) even if the firmware
+ * file is segmented and there are multiple packets. If we give the
+ * whole firmware to nci_send_data it will segment it and it will set
+ * the PBF flag to 0x01 so we need to do the segmentation here.
+ *
+ * The firmware will be analyzed and applied when we send NCI_OP_PROP_PATCH_CMD
+ * command with NCI_PATCH_TYPE_EOT parameter. The device will send a
+ * NFCC_PATCH_NTF packaet and a NCI_OP_CORE_RESET_NTF packet.
+ */
+static int fdp_nci_send_patch(struct nci_dev *ndev, u8 conn_id, u8 type)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	const struct firmware *fw;
+	struct sk_buff *skb;
+	unsigned long len;
+	int max_size, payload_size;
+	int rc = 0;
+
+	if ((type == NCI_PATCH_TYPE_OTP && !info->otp_patch) ||
+	    (type == NCI_PATCH_TYPE_RAM && !info->ram_patch))
+		return -EINVAL;
+
+	if (type == NCI_PATCH_TYPE_OTP)
+		fw = info->otp_patch;
+	else
+		fw = info->ram_patch;
+
+	max_size = nci_conn_max_data_pkt_payload_size(ndev, conn_id);
+	if (max_size <= 0)
+		return -EINVAL;
+
+	len = fw->size;
+
+	fdp_nci_set_data_pkt_counter(ndev, fdp_nci_send_patch_cb,
+				     DIV_ROUND_UP(fw->size, max_size));
+
+	while (len) {
+
+		payload_size = min_t(unsigned long, max_size, len);
+
+		skb = nci_skb_alloc(ndev, (NCI_CTRL_HDR_SIZE + payload_size),
+				    GFP_KERNEL);
+		if (!skb) {
+			fdp_nci_set_data_pkt_counter(ndev, NULL, 0);
+			return -ENOMEM;
+		}
+
+
+		skb_reserve(skb, NCI_CTRL_HDR_SIZE);
+
+		skb_put_data(skb, fw->data + (fw->size - len), payload_size);
+
+		rc = nci_send_data(ndev, conn_id, skb);
+
+		if (rc) {
+			fdp_nci_set_data_pkt_counter(ndev, NULL, 0);
+			return rc;
+		}
+
+		len -= payload_size;
+	}
+
+	return rc;
+}
+
+static int fdp_nci_open(struct nci_dev *ndev)
+{
+	int r;
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	r = info->phy_ops->enable(info->phy);
+
+	return r;
+}
+
+static int fdp_nci_close(struct nci_dev *ndev)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+
+	dev_dbg(dev, "%s\n", __func__);
+	return 0;
+}
+
+static int fdp_nci_send(struct nci_dev *ndev, struct sk_buff *skb)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	if (atomic_dec_and_test(&info->data_pkt_counter))
+		info->data_pkt_counter_cb(ndev);
+
+	return info->phy_ops->write(info->phy, skb);
+}
+
+int fdp_nci_recv_frame(struct nci_dev *ndev, struct sk_buff *skb)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+
+	dev_dbg(dev, "%s\n", __func__);
+	return nci_recv_frame(ndev, skb);
+}
+EXPORT_SYMBOL(fdp_nci_recv_frame);
+
+static int fdp_nci_request_firmware(struct nci_dev *ndev)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+	u8 *data;
+	int r;
+
+	r = request_firmware(&info->ram_patch, FDP_RAM_PATCH_NAME, dev);
+	if (r < 0) {
+		nfc_err(dev, "RAM patch request error\n");
+		goto error;
+	}
+
+	data = (u8 *) info->ram_patch->data;
+	info->ram_patch_version =
+		data[FDP_FW_HEADER_SIZE] |
+		(data[FDP_FW_HEADER_SIZE + 1] << 8) |
+		(data[FDP_FW_HEADER_SIZE + 2] << 16) |
+		(data[FDP_FW_HEADER_SIZE + 3] << 24);
+
+	dev_dbg(dev, "RAM patch version: %d, size: %d\n",
+		  info->ram_patch_version, (int) info->ram_patch->size);
+
+
+	r = request_firmware(&info->otp_patch, FDP_OTP_PATCH_NAME, dev);
+	if (r < 0) {
+		nfc_err(dev, "OTP patch request error\n");
+		goto out;
+	}
+
+	data = (u8 *) info->otp_patch->data;
+	info->otp_patch_version =
+		data[FDP_FW_HEADER_SIZE] |
+		(data[FDP_FW_HEADER_SIZE + 1] << 8) |
+		(data[FDP_FW_HEADER_SIZE+2] << 16) |
+		(data[FDP_FW_HEADER_SIZE+3] << 24);
+
+	dev_dbg(dev, "OTP patch version: %d, size: %d\n",
+		 info->otp_patch_version, (int) info->otp_patch->size);
+out:
+	return 0;
+error:
+	return r;
+}
+
+static void fdp_nci_release_firmware(struct nci_dev *ndev)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+
+	if (info->otp_patch) {
+		release_firmware(info->otp_patch);
+		info->otp_patch = NULL;
+	}
+
+	if (info->ram_patch) {
+		release_firmware(info->ram_patch);
+		info->ram_patch = NULL;
+	}
+}
+
+static int fdp_nci_patch_otp(struct nci_dev *ndev)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+	int conn_id;
+	int r = 0;
+
+	if (info->otp_version >= info->otp_patch_version)
+		goto out;
+
+	info->setup_patch_sent = 0;
+	info->setup_reset_ntf = 0;
+	info->setup_patch_ntf = 0;
+
+	/* Patch init request */
+	r = fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_OTP);
+	if (r)
+		goto out;
+
+	/* Patch data connection creation */
+	conn_id = fdp_nci_create_conn(ndev);
+	if (conn_id < 0) {
+		r = conn_id;
+		goto out;
+	}
+
+	/* Send the patch over the data connection */
+	r = fdp_nci_send_patch(ndev, conn_id, NCI_PATCH_TYPE_OTP);
+	if (r)
+		goto out;
+
+	/* Wait for all the packets to be send over i2c */
+	wait_event_interruptible(info->setup_wq,
+				 info->setup_patch_sent == 1);
+
+	/* make sure that the NFCC processed the last data packet */
+	msleep(FDP_FW_UPDATE_SLEEP);
+
+	/* Close the data connection */
+	r = nci_core_conn_close(info->ndev, conn_id);
+	if (r)
+		goto out;
+
+	/* Patch finish message */
+	if (fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_EOT)) {
+		nfc_err(dev, "OTP patch error 0x%x\n", r);
+		r = -EINVAL;
+		goto out;
+	}
+
+	/* If the patch notification didn't arrive yet, wait for it */
+	wait_event_interruptible(info->setup_wq, info->setup_patch_ntf);
+
+	/* Check if the patching was successful */
+	r = info->setup_patch_status;
+	if (r) {
+		nfc_err(dev, "OTP patch error 0x%x\n", r);
+		r = -EINVAL;
+		goto out;
+	}
+
+	/*
+	 * We need to wait for the reset notification before we
+	 * can continue
+	 */
+	wait_event_interruptible(info->setup_wq, info->setup_reset_ntf);
+
+out:
+	return r;
+}
+
+static int fdp_nci_patch_ram(struct nci_dev *ndev)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+	int conn_id;
+	int r = 0;
+
+	if (info->ram_version >= info->ram_patch_version)
+		goto out;
+
+	info->setup_patch_sent = 0;
+	info->setup_reset_ntf = 0;
+	info->setup_patch_ntf = 0;
+
+	/* Patch init request */
+	r = fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_RAM);
+	if (r)
+		goto out;
+
+	/* Patch data connection creation */
+	conn_id = fdp_nci_create_conn(ndev);
+	if (conn_id < 0) {
+		r = conn_id;
+		goto out;
+	}
+
+	/* Send the patch over the data connection */
+	r = fdp_nci_send_patch(ndev, conn_id, NCI_PATCH_TYPE_RAM);
+	if (r)
+		goto out;
+
+	/* Wait for all the packets to be send over i2c */
+	wait_event_interruptible(info->setup_wq,
+				 info->setup_patch_sent == 1);
+
+	/* make sure that the NFCC processed the last data packet */
+	msleep(FDP_FW_UPDATE_SLEEP);
+
+	/* Close the data connection */
+	r = nci_core_conn_close(info->ndev, conn_id);
+	if (r)
+		goto out;
+
+	/* Patch finish message */
+	if (fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_EOT)) {
+		nfc_err(dev, "RAM patch error 0x%x\n", r);
+		r = -EINVAL;
+		goto out;
+	}
+
+	/* If the patch notification didn't arrive yet, wait for it */
+	wait_event_interruptible(info->setup_wq, info->setup_patch_ntf);
+
+	/* Check if the patching was successful */
+	r = info->setup_patch_status;
+	if (r) {
+		nfc_err(dev, "RAM patch error 0x%x\n", r);
+		r = -EINVAL;
+		goto out;
+	}
+
+	/*
+	 * We need to wait for the reset notification before we
+	 * can continue
+	 */
+	wait_event_interruptible(info->setup_wq, info->setup_reset_ntf);
+
+out:
+	return r;
+}
+
+static int fdp_nci_setup(struct nci_dev *ndev)
+{
+	/* Format: total length followed by an NCI packet */
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+	int r;
+	u8 patched = 0;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	r = nci_core_init(ndev);
+	if (r)
+		goto error;
+
+	/* Get RAM and OTP version */
+	r = fdp_nci_get_versions(ndev);
+	if (r)
+		goto error;
+
+	/* Load firmware from disk */
+	r = fdp_nci_request_firmware(ndev);
+	if (r)
+		goto error;
+
+	/* Update OTP */
+	if (info->otp_version < info->otp_patch_version) {
+		r = fdp_nci_patch_otp(ndev);
+		if (r)
+			goto error;
+		patched = 1;
+	}
+
+	/* Update RAM */
+	if (info->ram_version < info->ram_patch_version) {
+		r = fdp_nci_patch_ram(ndev);
+		if (r)
+			goto error;
+		patched = 1;
+	}
+
+	/* Release the firmware buffers */
+	fdp_nci_release_firmware(ndev);
+
+	/* If a patch was applied the new version is checked */
+	if (patched) {
+		r = nci_core_init(ndev);
+		if (r)
+			goto error;
+
+		r = fdp_nci_get_versions(ndev);
+		if (r)
+			goto error;
+
+		if (info->otp_version != info->otp_patch_version ||
+		    info->ram_version != info->ram_patch_version) {
+			nfc_err(dev, "Firmware update failed");
+			r = -EINVAL;
+			goto error;
+		}
+	}
+
+	/*
+	 * We initialized the devices but the NFC subsystem expects
+	 * it to not be initialized.
+	 */
+	return nci_core_reset(ndev);
+
+error:
+	fdp_nci_release_firmware(ndev);
+	nfc_err(dev, "Setup error %d\n", r);
+	return r;
+}
+
+static int fdp_nci_post_setup(struct nci_dev *ndev)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+	int r;
+
+	/* Check if the device has VSC */
+	if (info->fw_vsc_cfg && info->fw_vsc_cfg[0]) {
+
+		/* Set the vendor specific configuration */
+		r = fdp_nci_set_production_data(ndev, info->fw_vsc_cfg[3],
+						&info->fw_vsc_cfg[4]);
+		if (r) {
+			nfc_err(dev, "Vendor specific config set error %d\n",
+				r);
+			return r;
+		}
+	}
+
+	/* Set clock type and frequency */
+	r = fdp_nci_set_clock(ndev, info->clock_type, info->clock_freq);
+	if (r) {
+		nfc_err(dev, "Clock set error %d\n", r);
+		return r;
+	}
+
+	/*
+	 * In order to apply the VSC FDP needs a reset
+	 */
+	r = nci_core_reset(ndev);
+	if (r)
+		return r;
+
+	/**
+	 * The nci core was initialized when post setup was called
+	 * so we leave it like that
+	 */
+	return nci_core_init(ndev);
+}
+
+static int fdp_nci_core_reset_ntf_packet(struct nci_dev *ndev,
+					  struct sk_buff *skb)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+
+	dev_dbg(dev, "%s\n", __func__);
+	info->setup_reset_ntf = 1;
+	wake_up(&info->setup_wq);
+
+	return 0;
+}
+
+static int fdp_nci_prop_patch_ntf_packet(struct nci_dev *ndev,
+					  struct sk_buff *skb)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+
+	dev_dbg(dev, "%s\n", __func__);
+	info->setup_patch_ntf = 1;
+	info->setup_patch_status = skb->data[0];
+	wake_up(&info->setup_wq);
+
+	return 0;
+}
+
+static int fdp_nci_prop_patch_rsp_packet(struct nci_dev *ndev,
+					  struct sk_buff *skb)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+	u8 status = skb->data[0];
+
+	dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
+	nci_req_complete(ndev, status);
+
+	return 0;
+}
+
+static int fdp_nci_prop_set_production_data_rsp_packet(struct nci_dev *ndev,
+							struct sk_buff *skb)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+	u8 status = skb->data[0];
+
+	dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
+	nci_req_complete(ndev, status);
+
+	return 0;
+}
+
+static int fdp_nci_core_get_config_rsp_packet(struct nci_dev *ndev,
+						struct sk_buff *skb)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+	struct nci_core_get_config_rsp *rsp = (void *) skb->data;
+	u8 i, *p;
+
+	if (rsp->status == NCI_STATUS_OK) {
+
+		p = rsp->data;
+		for (i = 0; i < 4; i++) {
+
+			switch (*p++) {
+			case NCI_PARAM_ID_FW_RAM_VERSION:
+				p++;
+				info->ram_version = le32_to_cpup((__le32 *) p);
+				p += 4;
+				break;
+			case NCI_PARAM_ID_FW_OTP_VERSION:
+				p++;
+				info->otp_version = le32_to_cpup((__le32 *) p);
+				p += 4;
+				break;
+			case NCI_PARAM_ID_OTP_LIMITED_VERSION:
+				p++;
+				info->otp_version = le32_to_cpup((__le32 *) p);
+				p += 4;
+				break;
+			case NCI_PARAM_ID_KEY_INDEX_ID:
+				p++;
+				info->key_index = *p++;
+			}
+		}
+	}
+
+	dev_dbg(dev, "OTP version %d\n", info->otp_version);
+	dev_dbg(dev, "RAM version %d\n", info->ram_version);
+	dev_dbg(dev, "key index %d\n", info->key_index);
+	dev_dbg(dev, "%s: status 0x%x\n", __func__, rsp->status);
+
+	nci_req_complete(ndev, rsp->status);
+
+	return 0;
+}
+
+static struct nci_driver_ops fdp_core_ops[] = {
+	{
+		.opcode = NCI_OP_CORE_GET_CONFIG_RSP,
+		.rsp = fdp_nci_core_get_config_rsp_packet,
+	},
+	{
+		.opcode = NCI_OP_CORE_RESET_NTF,
+		.ntf = fdp_nci_core_reset_ntf_packet,
+	},
+};
+
+static struct nci_driver_ops fdp_prop_ops[] = {
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROP, NCI_OP_PROP_PATCH_OID),
+		.rsp = fdp_nci_prop_patch_rsp_packet,
+		.ntf = fdp_nci_prop_patch_ntf_packet,
+	},
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROP,
+					  NCI_OP_PROP_SET_PDATA_OID),
+		.rsp = fdp_nci_prop_set_production_data_rsp_packet,
+	},
+};
+
+static struct nci_ops nci_ops = {
+	.open = fdp_nci_open,
+	.close = fdp_nci_close,
+	.send = fdp_nci_send,
+	.setup = fdp_nci_setup,
+	.post_setup = fdp_nci_post_setup,
+	.prop_ops = fdp_prop_ops,
+	.n_prop_ops = ARRAY_SIZE(fdp_prop_ops),
+	.core_ops = fdp_core_ops,
+	.n_core_ops = ARRAY_SIZE(fdp_core_ops),
+};
+
+int fdp_nci_probe(struct fdp_i2c_phy *phy, struct nfc_phy_ops *phy_ops,
+			struct nci_dev **ndevp, int tx_headroom,
+			int tx_tailroom, u8 clock_type, u32 clock_freq,
+			u8 *fw_vsc_cfg)
+{
+	struct device *dev = &phy->i2c_dev->dev;
+	struct fdp_nci_info *info;
+	struct nci_dev *ndev;
+	u32 protocols;
+	int r;
+
+	info = devm_kzalloc(dev, sizeof(struct fdp_nci_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->phy = phy;
+	info->phy_ops = phy_ops;
+	info->clock_type = clock_type;
+	info->clock_freq = clock_freq;
+	info->fw_vsc_cfg = fw_vsc_cfg;
+
+	init_waitqueue_head(&info->setup_wq);
+
+	protocols = NFC_PROTO_JEWEL_MASK |
+		    NFC_PROTO_MIFARE_MASK |
+		    NFC_PROTO_FELICA_MASK |
+		    NFC_PROTO_ISO14443_MASK |
+		    NFC_PROTO_ISO14443_B_MASK |
+		    NFC_PROTO_NFC_DEP_MASK |
+		    NFC_PROTO_ISO15693_MASK;
+
+	ndev = nci_allocate_device(&nci_ops, protocols, tx_headroom,
+				   tx_tailroom);
+	if (!ndev) {
+		nfc_err(dev, "Cannot allocate nfc ndev\n");
+		return -ENOMEM;
+	}
+
+	r = nci_register_device(ndev);
+	if (r)
+		goto err_regdev;
+
+	*ndevp = ndev;
+	info->ndev = ndev;
+
+	nci_set_drvdata(ndev, info);
+
+	return 0;
+
+err_regdev:
+	nci_free_device(ndev);
+	return r;
+}
+EXPORT_SYMBOL(fdp_nci_probe);
+
+void fdp_nci_remove(struct nci_dev *ndev)
+{
+	struct fdp_nci_info *info = nci_get_drvdata(ndev);
+	struct device *dev = &info->phy->i2c_dev->dev;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	nci_unregister_device(ndev);
+	nci_free_device(ndev);
+}
+EXPORT_SYMBOL(fdp_nci_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("NFC NCI driver for Intel Fields Peak NFC controller");
+MODULE_AUTHOR("Robert Dolca <robert.dolca@intel.com>");
diff --git a/drivers/nfc/fdp/fdp.h b/drivers/nfc/fdp/fdp.h
new file mode 100644
index 000000000..0bd36c005
--- /dev/null
+++ b/drivers/nfc/fdp/fdp.h
@@ -0,0 +1,38 @@
+/* -------------------------------------------------------------------------
+ * Copyright (C) 2014-2016, Intel Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ * -------------------------------------------------------------------------
+ */
+
+#ifndef __LOCAL_FDP_H_
+#define __LOCAL_FDP_H_
+
+#include <net/nfc/nci_core.h>
+#include <linux/gpio/consumer.h>
+
+struct fdp_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct gpio_desc *power_gpio;
+	struct nci_dev *ndev;
+
+	/* < 0 if i2c error occurred */
+	int hard_fault;
+	uint16_t next_read_size;
+};
+
+int fdp_nci_probe(struct fdp_i2c_phy *phy, struct nfc_phy_ops *phy_ops,
+		  struct nci_dev **ndev, int tx_headroom, int tx_tailroom,
+		  u8 clock_type, u32 clock_freq, u8 *fw_vsc_cfg);
+void fdp_nci_remove(struct nci_dev *ndev);
+int fdp_nci_recv_frame(struct nci_dev *ndev, struct sk_buff *skb);
+
+#endif /* __LOCAL_FDP_H_ */
diff --git a/drivers/nfc/fdp/i2c.c b/drivers/nfc/fdp/i2c.c
new file mode 100644
index 000000000..7f143387b
--- /dev/null
+++ b/drivers/nfc/fdp/i2c.c
@@ -0,0 +1,388 @@
+/* -------------------------------------------------------------------------
+ * Copyright (C) 2014-2016, Intel Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ * -------------------------------------------------------------------------
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/nfc.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <net/nfc/nfc.h>
+#include <net/nfc/nci_core.h>
+
+#include "fdp.h"
+
+#define FDP_I2C_DRIVER_NAME	"fdp_nci_i2c"
+
+#define FDP_DP_CLOCK_TYPE_NAME	"clock-type"
+#define FDP_DP_CLOCK_FREQ_NAME	"clock-freq"
+#define FDP_DP_FW_VSC_CFG_NAME	"fw-vsc-cfg"
+
+#define FDP_FRAME_HEADROOM	2
+#define FDP_FRAME_TAILROOM	1
+
+#define FDP_NCI_I2C_MIN_PAYLOAD	5
+#define FDP_NCI_I2C_MAX_PAYLOAD	261
+
+#define FDP_POWER_OFF		0
+#define FDP_POWER_ON		1
+
+#define fdp_nci_i2c_dump_skb(dev, prefix, skb)				\
+	print_hex_dump(KERN_DEBUG, prefix": ", DUMP_PREFIX_OFFSET,	\
+		       16, 1, (skb)->data, (skb)->len, 0)
+
+static void fdp_nci_i2c_reset(struct fdp_i2c_phy *phy)
+{
+	/* Reset RST/WakeUP for at least 100 micro-second */
+	gpiod_set_value_cansleep(phy->power_gpio, FDP_POWER_OFF);
+	usleep_range(1000, 4000);
+	gpiod_set_value_cansleep(phy->power_gpio, FDP_POWER_ON);
+	usleep_range(10000, 14000);
+}
+
+static int fdp_nci_i2c_enable(void *phy_id)
+{
+	struct fdp_i2c_phy *phy = phy_id;
+
+	dev_dbg(&phy->i2c_dev->dev, "%s\n", __func__);
+	fdp_nci_i2c_reset(phy);
+
+	return 0;
+}
+
+static void fdp_nci_i2c_disable(void *phy_id)
+{
+	struct fdp_i2c_phy *phy = phy_id;
+
+	dev_dbg(&phy->i2c_dev->dev, "%s\n", __func__);
+	fdp_nci_i2c_reset(phy);
+}
+
+static void fdp_nci_i2c_add_len_lrc(struct sk_buff *skb)
+{
+	u8 lrc = 0;
+	u16 len, i;
+
+	/* Add length header */
+	len = skb->len;
+	*(u8 *)skb_push(skb, 1) = len & 0xff;
+	*(u8 *)skb_push(skb, 1) = len >> 8;
+
+	/* Compute and add lrc */
+	for (i = 0; i < len + 2; i++)
+		lrc ^= skb->data[i];
+
+	skb_put_u8(skb, lrc);
+}
+
+static void fdp_nci_i2c_remove_len_lrc(struct sk_buff *skb)
+{
+	skb_pull(skb, FDP_FRAME_HEADROOM);
+	skb_trim(skb, skb->len - FDP_FRAME_TAILROOM);
+}
+
+static int fdp_nci_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+	struct fdp_i2c_phy *phy = phy_id;
+	struct i2c_client *client = phy->i2c_dev;
+	int r;
+
+	if (phy->hard_fault != 0)
+		return phy->hard_fault;
+
+	fdp_nci_i2c_add_len_lrc(skb);
+	fdp_nci_i2c_dump_skb(&client->dev, "fdp_wr", skb);
+
+	r = i2c_master_send(client, skb->data, skb->len);
+	if (r == -EREMOTEIO) {  /* Retry, chip was in standby */
+		usleep_range(1000, 4000);
+		r = i2c_master_send(client, skb->data, skb->len);
+	}
+
+	if (r < 0 || r != skb->len)
+		dev_dbg(&client->dev, "%s: error err=%d len=%d\n",
+			__func__, r, skb->len);
+
+	if (r >= 0) {
+		if (r != skb->len) {
+			phy->hard_fault = r;
+			r = -EREMOTEIO;
+		} else {
+			r = 0;
+		}
+	}
+
+	fdp_nci_i2c_remove_len_lrc(skb);
+
+	return r;
+}
+
+static struct nfc_phy_ops i2c_phy_ops = {
+	.write = fdp_nci_i2c_write,
+	.enable = fdp_nci_i2c_enable,
+	.disable = fdp_nci_i2c_disable,
+};
+
+static int fdp_nci_i2c_read(struct fdp_i2c_phy *phy, struct sk_buff **skb)
+{
+	int r, len;
+	u8 tmp[FDP_NCI_I2C_MAX_PAYLOAD], lrc, k;
+	u16 i;
+	struct i2c_client *client = phy->i2c_dev;
+
+	*skb = NULL;
+
+	/* Read the length packet and the data packet */
+	for (k = 0; k < 2; k++) {
+
+		len = phy->next_read_size;
+
+		r = i2c_master_recv(client, tmp, len);
+		if (r != len) {
+			dev_dbg(&client->dev, "%s: i2c recv err: %d\n",
+				__func__, r);
+			goto flush;
+		}
+
+		/* Check packet integruty */
+		for (lrc = i = 0; i < r; i++)
+			lrc ^= tmp[i];
+
+		/*
+		 * LRC check failed. This may due to transmission error or
+		 * desynchronization between driver and FDP. Drop the paquet
+		 * and force resynchronization
+		 */
+		if (lrc) {
+			dev_dbg(&client->dev, "%s: corrupted packet\n",
+				__func__);
+			phy->next_read_size = 5;
+			goto flush;
+		}
+
+		/* Packet that contains a length */
+		if (tmp[0] == 0 && tmp[1] == 0) {
+			phy->next_read_size = (tmp[2] << 8) + tmp[3] + 3;
+		} else {
+			phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD;
+
+			*skb = alloc_skb(len, GFP_KERNEL);
+			if (*skb == NULL) {
+				r = -ENOMEM;
+				goto flush;
+			}
+
+			skb_put_data(*skb, tmp, len);
+			fdp_nci_i2c_dump_skb(&client->dev, "fdp_rd", *skb);
+
+			fdp_nci_i2c_remove_len_lrc(*skb);
+		}
+	}
+
+	return 0;
+
+flush:
+	/* Flush the remaining data */
+	if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
+		r = -EREMOTEIO;
+
+	return r;
+}
+
+static irqreturn_t fdp_nci_i2c_irq_thread_fn(int irq, void *phy_id)
+{
+	struct fdp_i2c_phy *phy = phy_id;
+	struct i2c_client *client;
+	struct sk_buff *skb;
+	int r;
+
+	if (!phy || irq != phy->i2c_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	client = phy->i2c_dev;
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	r = fdp_nci_i2c_read(phy, &skb);
+
+	if (r == -EREMOTEIO)
+		return IRQ_HANDLED;
+	else if (r == -ENOMEM || r == -EBADMSG)
+		return IRQ_HANDLED;
+
+	if (skb != NULL)
+		fdp_nci_recv_frame(phy->ndev, skb);
+
+	return IRQ_HANDLED;
+}
+
+static void fdp_nci_i2c_read_device_properties(struct device *dev,
+					       u8 *clock_type, u32 *clock_freq,
+					       u8 **fw_vsc_cfg)
+{
+	int r;
+	u8 len;
+
+	r = device_property_read_u8(dev, FDP_DP_CLOCK_TYPE_NAME, clock_type);
+	if (r) {
+		dev_dbg(dev, "Using default clock type");
+		*clock_type = 0;
+	}
+
+	r = device_property_read_u32(dev, FDP_DP_CLOCK_FREQ_NAME, clock_freq);
+	if (r) {
+		dev_dbg(dev, "Using default clock frequency\n");
+		*clock_freq = 26000;
+	}
+
+	if (device_property_present(dev, FDP_DP_FW_VSC_CFG_NAME)) {
+		r = device_property_read_u8(dev, FDP_DP_FW_VSC_CFG_NAME,
+					    &len);
+
+		if (r || len <= 0)
+			goto vsc_read_err;
+
+		/* Add 1 to the length to inclue the length byte itself */
+		len++;
+
+		*fw_vsc_cfg = devm_kmalloc_array(dev,
+					   len, sizeof(**fw_vsc_cfg),
+					   GFP_KERNEL);
+
+		r = device_property_read_u8_array(dev, FDP_DP_FW_VSC_CFG_NAME,
+						  *fw_vsc_cfg, len);
+
+		if (r) {
+			devm_kfree(dev, *fw_vsc_cfg);
+			goto vsc_read_err;
+		}
+	} else {
+vsc_read_err:
+		dev_dbg(dev, "FW vendor specific commands not present\n");
+		*fw_vsc_cfg = NULL;
+	}
+
+	dev_dbg(dev, "Clock type: %d, clock frequency: %d, VSC: %s",
+		*clock_type, *clock_freq, *fw_vsc_cfg != NULL ? "yes" : "no");
+}
+
+static const struct acpi_gpio_params power_gpios = { 0, 0, false };
+
+static const struct acpi_gpio_mapping acpi_fdp_gpios[] = {
+	{ "power-gpios", &power_gpios, 1 },
+	{},
+};
+
+static int fdp_nci_i2c_probe(struct i2c_client *client)
+{
+	struct fdp_i2c_phy *phy;
+	struct device *dev = &client->dev;
+	u8 *fw_vsc_cfg;
+	u8 clock_type;
+	u32 clock_freq;
+	int r = 0;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		nfc_err(dev, "No I2C_FUNC_I2C support\n");
+		return -ENODEV;
+	}
+
+	/* Checking if we have an irq */
+	if (client->irq <= 0) {
+		nfc_err(dev, "IRQ not present\n");
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(dev, sizeof(struct fdp_i2c_phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->i2c_dev = client;
+	phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD;
+	i2c_set_clientdata(client, phy);
+
+	r = devm_request_threaded_irq(dev, client->irq,
+				      NULL, fdp_nci_i2c_irq_thread_fn,
+				      IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				      FDP_I2C_DRIVER_NAME, phy);
+
+	if (r < 0) {
+		nfc_err(&client->dev, "Unable to register IRQ handler\n");
+		return r;
+	}
+
+	r = devm_acpi_dev_add_driver_gpios(dev, acpi_fdp_gpios);
+	if (r)
+		dev_dbg(dev, "Unable to add GPIO mapping table\n");
+
+	/* Requesting the power gpio */
+	phy->power_gpio = devm_gpiod_get(dev, "power", GPIOD_OUT_LOW);
+	if (IS_ERR(phy->power_gpio)) {
+		nfc_err(dev, "Power GPIO request failed\n");
+		return PTR_ERR(phy->power_gpio);
+	}
+
+	/* read device properties to get the clock and production settings */
+	fdp_nci_i2c_read_device_properties(dev, &clock_type, &clock_freq,
+					   &fw_vsc_cfg);
+
+	/* Call the NFC specific probe function */
+	r = fdp_nci_probe(phy, &i2c_phy_ops, &phy->ndev,
+			  FDP_FRAME_HEADROOM, FDP_FRAME_TAILROOM,
+			  clock_type, clock_freq, fw_vsc_cfg);
+	if (r < 0) {
+		nfc_err(dev, "NCI probing error\n");
+		return r;
+	}
+
+	dev_dbg(dev, "I2C driver loaded\n");
+	return 0;
+}
+
+static int fdp_nci_i2c_remove(struct i2c_client *client)
+{
+	struct fdp_i2c_phy *phy = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	fdp_nci_remove(phy->ndev);
+	fdp_nci_i2c_disable(phy);
+
+	return 0;
+}
+
+static const struct acpi_device_id fdp_nci_i2c_acpi_match[] = {
+	{"INT339A", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, fdp_nci_i2c_acpi_match);
+
+static struct i2c_driver fdp_nci_i2c_driver = {
+	.driver = {
+		   .name = FDP_I2C_DRIVER_NAME,
+		   .acpi_match_table = ACPI_PTR(fdp_nci_i2c_acpi_match),
+		  },
+	.probe_new = fdp_nci_i2c_probe,
+	.remove = fdp_nci_i2c_remove,
+};
+module_i2c_driver(fdp_nci_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("I2C driver for Intel Fields Peak NFC controller");
+MODULE_AUTHOR("Robert Dolca <robert.dolca@intel.com>");
diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c
new file mode 100644
index 000000000..8a04c5e02
--- /dev/null
+++ b/drivers/nfc/mei_phy.c
@@ -0,0 +1,416 @@
+/*
+ * MEI Library for mei bus nfc device access
+ *
+ * Copyright (C) 2013  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/nfc.h>
+
+#include "mei_phy.h"
+
+struct mei_nfc_hdr {
+	u8 cmd;
+	u8 status;
+	u16 req_id;
+	u32 reserved;
+	u16 data_size;
+} __packed;
+
+struct mei_nfc_cmd {
+	struct mei_nfc_hdr hdr;
+	u8 sub_command;
+	u8 data[];
+} __packed;
+
+struct mei_nfc_reply {
+	struct mei_nfc_hdr hdr;
+	u8 sub_command;
+	u8 reply_status;
+	u8 data[];
+} __packed;
+
+struct mei_nfc_if_version {
+	u8 radio_version_sw[3];
+	u8 reserved[3];
+	u8 radio_version_hw[3];
+	u8 i2c_addr;
+	u8 fw_ivn;
+	u8 vendor_id;
+	u8 radio_type;
+} __packed;
+
+struct mei_nfc_connect {
+	u8 fw_ivn;
+	u8 vendor_id;
+} __packed;
+
+struct mei_nfc_connect_resp {
+	u8 fw_ivn;
+	u8 vendor_id;
+	u16 me_major;
+	u16 me_minor;
+	u16 me_hotfix;
+	u16 me_build;
+} __packed;
+
+
+#define MEI_NFC_CMD_MAINTENANCE 0x00
+#define MEI_NFC_CMD_HCI_SEND 0x01
+#define MEI_NFC_CMD_HCI_RECV 0x02
+
+#define MEI_NFC_SUBCMD_CONNECT    0x00
+#define MEI_NFC_SUBCMD_IF_VERSION 0x01
+
+#define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD)
+
+#define MEI_DUMP_SKB_IN(info, skb)				\
+do {								\
+	pr_debug("%s:\n", info);				\
+	print_hex_dump_debug("mei in : ", DUMP_PREFIX_OFFSET,	\
+			16, 1, (skb)->data, (skb)->len, false);	\
+} while (0)
+
+#define MEI_DUMP_SKB_OUT(info, skb)				\
+do {								\
+	pr_debug("%s:\n", info);				\
+	print_hex_dump_debug("mei out: ", DUMP_PREFIX_OFFSET,	\
+			16, 1, (skb)->data, (skb)->len, false);	\
+} while (0)
+
+#define MEI_DUMP_NFC_HDR(info, _hdr)                                \
+do {                                                                \
+	pr_debug("%s:\n", info);                                    \
+	pr_debug("cmd=%02d status=%d req_id=%d rsvd=%d size=%d\n",  \
+		 (_hdr)->cmd, (_hdr)->status, (_hdr)->req_id,       \
+		 (_hdr)->reserved, (_hdr)->data_size);              \
+} while (0)
+
+static int mei_nfc_if_version(struct nfc_mei_phy *phy)
+{
+
+	struct mei_nfc_cmd cmd;
+	struct mei_nfc_reply *reply = NULL;
+	struct mei_nfc_if_version *version;
+	size_t if_version_length;
+	int bytes_recv, r;
+
+	pr_info("%s\n", __func__);
+
+	memset(&cmd, 0, sizeof(struct mei_nfc_cmd));
+	cmd.hdr.cmd = MEI_NFC_CMD_MAINTENANCE;
+	cmd.hdr.data_size = 1;
+	cmd.sub_command = MEI_NFC_SUBCMD_IF_VERSION;
+
+	MEI_DUMP_NFC_HDR("version", &cmd.hdr);
+	r = mei_cldev_send(phy->cldev, (u8 *)&cmd, sizeof(struct mei_nfc_cmd));
+	if (r < 0) {
+		pr_err("Could not send IF version cmd\n");
+		return r;
+	}
+
+	/* to be sure on the stack we alloc memory */
+	if_version_length = sizeof(struct mei_nfc_reply) +
+		sizeof(struct mei_nfc_if_version);
+
+	reply = kzalloc(if_version_length, GFP_KERNEL);
+	if (!reply)
+		return -ENOMEM;
+
+	bytes_recv = mei_cldev_recv(phy->cldev, (u8 *)reply, if_version_length);
+	if (bytes_recv < 0 || bytes_recv < if_version_length) {
+		pr_err("Could not read IF version\n");
+		r = -EIO;
+		goto err;
+	}
+
+	version = (struct mei_nfc_if_version *)reply->data;
+
+	phy->fw_ivn = version->fw_ivn;
+	phy->vendor_id = version->vendor_id;
+	phy->radio_type = version->radio_type;
+
+err:
+	kfree(reply);
+	return r;
+}
+
+static int mei_nfc_connect(struct nfc_mei_phy *phy)
+{
+	struct mei_nfc_cmd *cmd, *reply;
+	struct mei_nfc_connect *connect;
+	struct mei_nfc_connect_resp *connect_resp;
+	size_t connect_length, connect_resp_length;
+	int bytes_recv, r;
+
+	pr_info("%s\n", __func__);
+
+	connect_length = sizeof(struct mei_nfc_cmd) +
+			sizeof(struct mei_nfc_connect);
+
+	connect_resp_length = sizeof(struct mei_nfc_cmd) +
+			sizeof(struct mei_nfc_connect_resp);
+
+	cmd = kzalloc(connect_length, GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+	connect = (struct mei_nfc_connect *)cmd->data;
+
+	reply = kzalloc(connect_resp_length, GFP_KERNEL);
+	if (!reply) {
+		kfree(cmd);
+		return -ENOMEM;
+	}
+
+	connect_resp = (struct mei_nfc_connect_resp *)reply->data;
+
+	cmd->hdr.cmd = MEI_NFC_CMD_MAINTENANCE;
+	cmd->hdr.data_size = 3;
+	cmd->sub_command = MEI_NFC_SUBCMD_CONNECT;
+	connect->fw_ivn = phy->fw_ivn;
+	connect->vendor_id = phy->vendor_id;
+
+	MEI_DUMP_NFC_HDR("connect request", &cmd->hdr);
+	r = mei_cldev_send(phy->cldev, (u8 *)cmd, connect_length);
+	if (r < 0) {
+		pr_err("Could not send connect cmd %d\n", r);
+		goto err;
+	}
+
+	bytes_recv = mei_cldev_recv(phy->cldev, (u8 *)reply,
+				    connect_resp_length);
+	if (bytes_recv < 0) {
+		r = bytes_recv;
+		pr_err("Could not read connect response %d\n", r);
+		goto err;
+	}
+
+	MEI_DUMP_NFC_HDR("connect reply", &reply->hdr);
+
+	pr_info("IVN 0x%x Vendor ID 0x%x\n",
+		 connect_resp->fw_ivn, connect_resp->vendor_id);
+
+	pr_info("ME FW %d.%d.%d.%d\n",
+		connect_resp->me_major, connect_resp->me_minor,
+		connect_resp->me_hotfix, connect_resp->me_build);
+
+	r = 0;
+
+err:
+	kfree(reply);
+	kfree(cmd);
+
+	return r;
+}
+
+static int mei_nfc_send(struct nfc_mei_phy *phy, u8 *buf, size_t length)
+{
+	struct mei_nfc_hdr *hdr;
+	u8 *mei_buf;
+	int err;
+
+	err = -ENOMEM;
+	mei_buf = kzalloc(length + MEI_NFC_HEADER_SIZE, GFP_KERNEL);
+	if (!mei_buf)
+		goto out;
+
+	hdr = (struct mei_nfc_hdr *)mei_buf;
+	hdr->cmd = MEI_NFC_CMD_HCI_SEND;
+	hdr->status = 0;
+	hdr->req_id = phy->req_id;
+	hdr->reserved = 0;
+	hdr->data_size = length;
+
+	MEI_DUMP_NFC_HDR("send", hdr);
+
+	memcpy(mei_buf + MEI_NFC_HEADER_SIZE, buf, length);
+	err = mei_cldev_send(phy->cldev, mei_buf, length + MEI_NFC_HEADER_SIZE);
+	if (err < 0)
+		goto out;
+
+	if (!wait_event_interruptible_timeout(phy->send_wq,
+				phy->recv_req_id == phy->req_id, HZ)) {
+		pr_err("NFC MEI command timeout\n");
+		err = -ETIME;
+	} else {
+		phy->req_id++;
+	}
+out:
+	kfree(mei_buf);
+	return err;
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int nfc_mei_phy_write(void *phy_id, struct sk_buff *skb)
+{
+	struct nfc_mei_phy *phy = phy_id;
+	int r;
+
+	MEI_DUMP_SKB_OUT("mei frame sent", skb);
+
+	r = mei_nfc_send(phy, skb->data, skb->len);
+	if (r > 0)
+		r = 0;
+
+	return r;
+}
+
+static int mei_nfc_recv(struct nfc_mei_phy *phy, u8 *buf, size_t length)
+{
+	struct mei_nfc_hdr *hdr;
+	int received_length;
+
+	received_length = mei_cldev_recv(phy->cldev, buf, length);
+	if (received_length < 0)
+		return received_length;
+
+	hdr = (struct mei_nfc_hdr *) buf;
+
+	MEI_DUMP_NFC_HDR("receive", hdr);
+	if (hdr->cmd == MEI_NFC_CMD_HCI_SEND) {
+		phy->recv_req_id = hdr->req_id;
+		wake_up(&phy->send_wq);
+
+		return 0;
+	}
+
+	return received_length;
+}
+
+
+static void nfc_mei_rx_cb(struct mei_cl_device *cldev)
+{
+	struct nfc_mei_phy *phy = mei_cldev_get_drvdata(cldev);
+	struct sk_buff *skb;
+	int reply_size;
+
+	if (!phy)
+		return;
+
+	if (phy->hard_fault != 0)
+		return;
+
+	skb = alloc_skb(MEI_NFC_MAX_READ, GFP_KERNEL);
+	if (!skb)
+		return;
+
+	reply_size = mei_nfc_recv(phy, skb->data, MEI_NFC_MAX_READ);
+	if (reply_size < MEI_NFC_HEADER_SIZE) {
+		kfree_skb(skb);
+		return;
+	}
+
+	skb_put(skb, reply_size);
+	skb_pull(skb, MEI_NFC_HEADER_SIZE);
+
+	MEI_DUMP_SKB_IN("mei frame read", skb);
+
+	nfc_hci_recv_frame(phy->hdev, skb);
+}
+
+static int nfc_mei_phy_enable(void *phy_id)
+{
+	int r;
+	struct nfc_mei_phy *phy = phy_id;
+
+	pr_info("%s\n", __func__);
+
+	if (phy->powered == 1)
+		return 0;
+
+	r = mei_cldev_enable(phy->cldev);
+	if (r < 0) {
+		pr_err("Could not enable device %d\n", r);
+		return r;
+	}
+
+	r = mei_nfc_if_version(phy);
+	if (r < 0) {
+		pr_err("Could not enable device %d\n", r);
+		goto err;
+	}
+
+	r = mei_nfc_connect(phy);
+	if (r < 0) {
+		pr_err("Could not connect to device %d\n", r);
+		goto err;
+	}
+
+	r = mei_cldev_register_rx_cb(phy->cldev, nfc_mei_rx_cb);
+	if (r) {
+		pr_err("Event cb registration failed %d\n", r);
+		goto err;
+	}
+
+	phy->powered = 1;
+
+	return 0;
+
+err:
+	phy->powered = 0;
+	mei_cldev_disable(phy->cldev);
+	return r;
+}
+
+static void nfc_mei_phy_disable(void *phy_id)
+{
+	struct nfc_mei_phy *phy = phy_id;
+
+	pr_info("%s\n", __func__);
+
+	mei_cldev_disable(phy->cldev);
+
+	phy->powered = 0;
+}
+
+struct nfc_phy_ops mei_phy_ops = {
+	.write = nfc_mei_phy_write,
+	.enable = nfc_mei_phy_enable,
+	.disable = nfc_mei_phy_disable,
+};
+EXPORT_SYMBOL_GPL(mei_phy_ops);
+
+struct nfc_mei_phy *nfc_mei_phy_alloc(struct mei_cl_device *cldev)
+{
+	struct nfc_mei_phy *phy;
+
+	phy = kzalloc(sizeof(struct nfc_mei_phy), GFP_KERNEL);
+	if (!phy)
+		return NULL;
+
+	phy->cldev = cldev;
+	init_waitqueue_head(&phy->send_wq);
+	mei_cldev_set_drvdata(cldev, phy);
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(nfc_mei_phy_alloc);
+
+void nfc_mei_phy_free(struct nfc_mei_phy *phy)
+{
+	mei_cldev_disable(phy->cldev);
+	kfree(phy);
+}
+EXPORT_SYMBOL_GPL(nfc_mei_phy_free);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("mei bus NFC device interface");
diff --git a/drivers/nfc/mei_phy.h b/drivers/nfc/mei_phy.h
new file mode 100644
index 000000000..51bd44f5f
--- /dev/null
+++ b/drivers/nfc/mei_phy.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LOCAL_MEI_PHY_H_
+#define __LOCAL_MEI_PHY_H_
+
+#include <linux/mei_cl_bus.h>
+#include <net/nfc/hci.h>
+#include <linux/uuid.h>
+
+#define MEI_NFC_UUID UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, \
+		0x94, 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c)
+#define MEI_NFC_HEADER_SIZE 10
+#define MEI_NFC_MAX_HCI_PAYLOAD 300
+
+/**
+ * struct nfc_mei_phy
+ *
+ * @cldev: mei client device
+ * @hdev:   nfc hci device
+
+ * @send_wq: send completion wait queue
+ * @fw_ivn: NFC Interface Version Number
+ * @vendor_id: NFC manufacturer ID
+ * @radio_type: NFC radio type
+ * @reserved: reserved for alignment
+ * @req_id:  message counter
+ * @recv_req_id: reception message counter
+ * @powered: the device is in powered state
+ * @hard_fault: < 0 if hardware error occurred
+ *    and prevents normal operation.
+ */
+struct nfc_mei_phy {
+	struct mei_cl_device *cldev;
+	struct nfc_hci_dev *hdev;
+
+	wait_queue_head_t send_wq;
+	u8 fw_ivn;
+	u8 vendor_id;
+	u8 radio_type;
+	u8 reserved;
+
+	u16 req_id;
+	u16 recv_req_id;
+
+	int powered;
+	int hard_fault;
+};
+
+extern struct nfc_phy_ops mei_phy_ops;
+
+struct nfc_mei_phy *nfc_mei_phy_alloc(struct mei_cl_device *device);
+void nfc_mei_phy_free(struct nfc_mei_phy *phy);
+
+#endif /* __LOCAL_MEI_PHY_H_ */
diff --git a/drivers/nfc/microread/Kconfig b/drivers/nfc/microread/Kconfig
new file mode 100644
index 000000000..2c6dbc9f6
--- /dev/null
+++ b/drivers/nfc/microread/Kconfig
@@ -0,0 +1,31 @@
+config NFC_MICROREAD
+	tristate
+	select CRC_CCITT
+	---help---
+	  This module contains the main code for Inside Secure microread
+	  NFC chipsets. It implements the chipset HCI logic and hooks into
+	  the NFC kernel APIs. Physical layers will register against it.
+
+config NFC_MICROREAD_I2C
+	tristate "Inside Secure Microread device support (I2C)"
+	depends on NFC_HCI && I2C && NFC_SHDLC
+	select NFC_MICROREAD
+	---help---
+	  This module adds support for the i2c interface of adapters using
+	  Inside microread chipsets.  Select this if your platform is using
+	  the i2c bus.
+
+	  If you choose to build a module, it'll be called microread_i2c.
+	  Say N if unsure.
+
+config NFC_MICROREAD_MEI
+	tristate "Inside Secure Microread device support (MEI)"
+	depends on NFC_HCI && NFC_MEI_PHY
+	select NFC_MICROREAD
+	---help---
+	  This module adds support for the mei interface of adapters using
+	  Inside microread chipsets.  Select this if your microread chipset
+	  is handled by Intel's Management Engine Interface on your platform.
+
+	  If you choose to build a module, it'll be called microread_mei.
+	  Say N if unsure.
diff --git a/drivers/nfc/microread/Makefile b/drivers/nfc/microread/Makefile
new file mode 100644
index 000000000..2f7dda265
--- /dev/null
+++ b/drivers/nfc/microread/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Microread HCI based NFC driver
+#
+
+microread_i2c-objs  = i2c.o
+microread_mei-objs  = mei.o
+
+obj-$(CONFIG_NFC_MICROREAD)     += microread.o
+obj-$(CONFIG_NFC_MICROREAD_I2C) += microread_i2c.o
+obj-$(CONFIG_NFC_MICROREAD_MEI) += microread_mei.o
diff --git a/drivers/nfc/microread/i2c.c b/drivers/nfc/microread/i2c.c
new file mode 100644
index 000000000..1806d20a5
--- /dev/null
+++ b/drivers/nfc/microread/i2c.c
@@ -0,0 +1,315 @@
+/*
+ * HCI based Driver for Inside Secure microread NFC Chip - i2c layer
+ *
+ * Copyright (C) 2013 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "microread.h"
+
+#define MICROREAD_I2C_DRIVER_NAME "microread"
+
+#define MICROREAD_I2C_FRAME_HEADROOM 1
+#define MICROREAD_I2C_FRAME_TAILROOM 1
+
+/* framing in HCI mode */
+#define MICROREAD_I2C_LLC_LEN		1
+#define MICROREAD_I2C_LLC_CRC		1
+#define MICROREAD_I2C_LLC_LEN_CRC	(MICROREAD_I2C_LLC_LEN + \
+					MICROREAD_I2C_LLC_CRC)
+#define MICROREAD_I2C_LLC_MIN_SIZE	(1 + MICROREAD_I2C_LLC_LEN_CRC)
+#define MICROREAD_I2C_LLC_MAX_PAYLOAD	29
+#define MICROREAD_I2C_LLC_MAX_SIZE	(MICROREAD_I2C_LLC_LEN_CRC + 1 + \
+					MICROREAD_I2C_LLC_MAX_PAYLOAD)
+
+struct microread_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct nfc_hci_dev *hdev;
+
+	int hard_fault;		/*
+				 * < 0 if hardware error occured (e.g. i2c err)
+				 * and prevents normal operation.
+				 */
+};
+
+#define I2C_DUMP_SKB(info, skb)					\
+do {								\
+	pr_debug("%s:\n", info);				\
+	print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET,	\
+		       16, 1, (skb)->data, (skb)->len, 0);	\
+} while (0)
+
+static void microread_i2c_add_len_crc(struct sk_buff *skb)
+{
+	int i;
+	u8 crc = 0;
+	int len;
+
+	len = skb->len;
+	*(u8 *)skb_push(skb, 1) = len;
+
+	for (i = 0; i < skb->len; i++)
+		crc = crc ^ skb->data[i];
+
+	skb_put_u8(skb, crc);
+}
+
+static void microread_i2c_remove_len_crc(struct sk_buff *skb)
+{
+	skb_pull(skb, MICROREAD_I2C_FRAME_HEADROOM);
+	skb_trim(skb, MICROREAD_I2C_FRAME_TAILROOM);
+}
+
+static int check_crc(struct sk_buff *skb)
+{
+	int i;
+	u8 crc = 0;
+
+	for (i = 0; i < skb->len - 1; i++)
+		crc = crc ^ skb->data[i];
+
+	if (crc != skb->data[skb->len-1]) {
+		pr_err("CRC error 0x%x != 0x%x\n", crc, skb->data[skb->len-1]);
+		pr_info("%s: BAD CRC\n", __func__);
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+static int microread_i2c_enable(void *phy_id)
+{
+	return 0;
+}
+
+static void microread_i2c_disable(void *phy_id)
+{
+	return;
+}
+
+static int microread_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+	int r;
+	struct microread_i2c_phy *phy = phy_id;
+	struct i2c_client *client = phy->i2c_dev;
+
+	if (phy->hard_fault != 0)
+		return phy->hard_fault;
+
+	usleep_range(3000, 6000);
+
+	microread_i2c_add_len_crc(skb);
+
+	I2C_DUMP_SKB("i2c frame written", skb);
+
+	r = i2c_master_send(client, skb->data, skb->len);
+
+	if (r == -EREMOTEIO) {	/* Retry, chip was in standby */
+		usleep_range(6000, 10000);
+		r = i2c_master_send(client, skb->data, skb->len);
+	}
+
+	if (r >= 0) {
+		if (r != skb->len)
+			r = -EREMOTEIO;
+		else
+			r = 0;
+	}
+
+	microread_i2c_remove_len_crc(skb);
+
+	return r;
+}
+
+
+static int microread_i2c_read(struct microread_i2c_phy *phy,
+			      struct sk_buff **skb)
+{
+	int r;
+	u8 len;
+	u8 tmp[MICROREAD_I2C_LLC_MAX_SIZE - 1];
+	struct i2c_client *client = phy->i2c_dev;
+
+	r = i2c_master_recv(client, &len, 1);
+	if (r != 1) {
+		nfc_err(&client->dev, "cannot read len byte\n");
+		return -EREMOTEIO;
+	}
+
+	if ((len < MICROREAD_I2C_LLC_MIN_SIZE) ||
+	    (len > MICROREAD_I2C_LLC_MAX_SIZE)) {
+		nfc_err(&client->dev, "invalid len byte\n");
+		r = -EBADMSG;
+		goto flush;
+	}
+
+	*skb = alloc_skb(1 + len, GFP_KERNEL);
+	if (*skb == NULL) {
+		r = -ENOMEM;
+		goto flush;
+	}
+
+	skb_put_u8(*skb, len);
+
+	r = i2c_master_recv(client, skb_put(*skb, len), len);
+	if (r != len) {
+		kfree_skb(*skb);
+		return -EREMOTEIO;
+	}
+
+	I2C_DUMP_SKB("cc frame read", *skb);
+
+	r = check_crc(*skb);
+	if (r != 0) {
+		kfree_skb(*skb);
+		r = -EBADMSG;
+		goto flush;
+	}
+
+	skb_pull(*skb, 1);
+	skb_trim(*skb, (*skb)->len - MICROREAD_I2C_FRAME_TAILROOM);
+
+	usleep_range(3000, 6000);
+
+	return 0;
+
+flush:
+	if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
+		r = -EREMOTEIO;
+
+	usleep_range(3000, 6000);
+
+	return r;
+}
+
+static irqreturn_t microread_i2c_irq_thread_fn(int irq, void *phy_id)
+{
+	struct microread_i2c_phy *phy = phy_id;
+	struct sk_buff *skb = NULL;
+	int r;
+
+	if (!phy || irq != phy->i2c_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	if (phy->hard_fault != 0)
+		return IRQ_HANDLED;
+
+	r = microread_i2c_read(phy, &skb);
+	if (r == -EREMOTEIO) {
+		phy->hard_fault = r;
+
+		nfc_hci_recv_frame(phy->hdev, NULL);
+
+		return IRQ_HANDLED;
+	} else if ((r == -ENOMEM) || (r == -EBADMSG)) {
+		return IRQ_HANDLED;
+	}
+
+	nfc_hci_recv_frame(phy->hdev, skb);
+
+	return IRQ_HANDLED;
+}
+
+static struct nfc_phy_ops i2c_phy_ops = {
+	.write = microread_i2c_write,
+	.enable = microread_i2c_enable,
+	.disable = microread_i2c_disable,
+};
+
+static int microread_i2c_probe(struct i2c_client *client,
+			       const struct i2c_device_id *id)
+{
+	struct microread_i2c_phy *phy;
+	int r;
+
+	dev_dbg(&client->dev, "client %p\n", client);
+
+	phy = devm_kzalloc(&client->dev, sizeof(struct microread_i2c_phy),
+			   GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, phy);
+	phy->i2c_dev = client;
+
+	r = request_threaded_irq(client->irq, NULL, microread_i2c_irq_thread_fn,
+				 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				 MICROREAD_I2C_DRIVER_NAME, phy);
+	if (r) {
+		nfc_err(&client->dev, "Unable to register IRQ handler\n");
+		return r;
+	}
+
+	r = microread_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
+			    MICROREAD_I2C_FRAME_HEADROOM,
+			    MICROREAD_I2C_FRAME_TAILROOM,
+			    MICROREAD_I2C_LLC_MAX_PAYLOAD, &phy->hdev);
+	if (r < 0)
+		goto err_irq;
+
+	nfc_info(&client->dev, "Probed\n");
+
+	return 0;
+
+err_irq:
+	free_irq(client->irq, phy);
+
+	return r;
+}
+
+static int microread_i2c_remove(struct i2c_client *client)
+{
+	struct microread_i2c_phy *phy = i2c_get_clientdata(client);
+
+	microread_remove(phy->hdev);
+
+	free_irq(client->irq, phy);
+
+	return 0;
+}
+
+static const struct i2c_device_id microread_i2c_id[] = {
+	{ MICROREAD_I2C_DRIVER_NAME, 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, microread_i2c_id);
+
+static struct i2c_driver microread_i2c_driver = {
+	.driver = {
+		.name = MICROREAD_I2C_DRIVER_NAME,
+	},
+	.probe		= microread_i2c_probe,
+	.remove		= microread_i2c_remove,
+	.id_table	= microread_i2c_id,
+};
+
+module_i2c_driver(microread_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c
new file mode 100644
index 000000000..eb5eddf17
--- /dev/null
+++ b/drivers/nfc/microread/mei.c
@@ -0,0 +1,88 @@
+/*
+ * HCI based Driver for Inside Secure microread NFC Chip
+ *
+ * Copyright (C) 2013  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "../mei_phy.h"
+#include "microread.h"
+
+#define MICROREAD_DRIVER_NAME "microread"
+
+static int microread_mei_probe(struct mei_cl_device *cldev,
+			       const struct mei_cl_device_id *id)
+{
+	struct nfc_mei_phy *phy;
+	int r;
+
+	pr_info("Probing NFC microread\n");
+
+	phy = nfc_mei_phy_alloc(cldev);
+	if (!phy) {
+		pr_err("Cannot allocate memory for microread mei phy.\n");
+		return -ENOMEM;
+	}
+
+	r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME,
+			    MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD,
+			    &phy->hdev);
+	if (r < 0) {
+		nfc_mei_phy_free(phy);
+
+		return r;
+	}
+
+	return 0;
+}
+
+static int microread_mei_remove(struct mei_cl_device *cldev)
+{
+	struct nfc_mei_phy *phy = mei_cldev_get_drvdata(cldev);
+
+	microread_remove(phy->hdev);
+
+	nfc_mei_phy_free(phy);
+
+	return 0;
+}
+
+static struct mei_cl_device_id microread_mei_tbl[] = {
+	{ MICROREAD_DRIVER_NAME, MEI_NFC_UUID, MEI_CL_VERSION_ANY},
+
+	/* required last entry */
+	{ }
+};
+MODULE_DEVICE_TABLE(mei, microread_mei_tbl);
+
+static struct mei_cl_driver microread_driver = {
+	.id_table = microread_mei_tbl,
+	.name = MICROREAD_DRIVER_NAME,
+
+	.probe = microread_mei_probe,
+	.remove = microread_mei_remove,
+};
+
+module_mei_cl_driver(microread_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/microread/microread.c b/drivers/nfc/microread/microread.c
new file mode 100644
index 000000000..e5d5d2d97
--- /dev/null
+++ b/drivers/nfc/microread/microread.c
@@ -0,0 +1,734 @@
+/*
+ * HCI based Driver for Inside Secure microread NFC Chip
+ *
+ * Copyright (C) 2013  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/crc-ccitt.h>
+
+#include <linux/nfc.h>
+#include <net/nfc/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "microread.h"
+
+/* Proprietary gates, events, commands and registers */
+/* Admin */
+#define MICROREAD_GATE_ID_ADM NFC_HCI_ADMIN_GATE
+#define MICROREAD_GATE_ID_MGT 0x01
+#define MICROREAD_GATE_ID_OS 0x02
+#define MICROREAD_GATE_ID_TESTRF 0x03
+#define MICROREAD_GATE_ID_LOOPBACK NFC_HCI_LOOPBACK_GATE
+#define MICROREAD_GATE_ID_IDT NFC_HCI_ID_MGMT_GATE
+#define MICROREAD_GATE_ID_LMS NFC_HCI_LINK_MGMT_GATE
+
+/* Reader */
+#define MICROREAD_GATE_ID_MREAD_GEN 0x10
+#define MICROREAD_GATE_ID_MREAD_ISO_B NFC_HCI_RF_READER_B_GATE
+#define MICROREAD_GATE_ID_MREAD_NFC_T1 0x12
+#define MICROREAD_GATE_ID_MREAD_ISO_A NFC_HCI_RF_READER_A_GATE
+#define MICROREAD_GATE_ID_MREAD_NFC_T3 0x14
+#define MICROREAD_GATE_ID_MREAD_ISO_15_3 0x15
+#define MICROREAD_GATE_ID_MREAD_ISO_15_2 0x16
+#define MICROREAD_GATE_ID_MREAD_ISO_B_3 0x17
+#define MICROREAD_GATE_ID_MREAD_BPRIME 0x18
+#define MICROREAD_GATE_ID_MREAD_ISO_A_3 0x19
+
+/* Card */
+#define MICROREAD_GATE_ID_MCARD_GEN 0x20
+#define MICROREAD_GATE_ID_MCARD_ISO_B 0x21
+#define MICROREAD_GATE_ID_MCARD_BPRIME 0x22
+#define MICROREAD_GATE_ID_MCARD_ISO_A 0x23
+#define MICROREAD_GATE_ID_MCARD_NFC_T3 0x24
+#define MICROREAD_GATE_ID_MCARD_ISO_15_3 0x25
+#define MICROREAD_GATE_ID_MCARD_ISO_15_2 0x26
+#define MICROREAD_GATE_ID_MCARD_ISO_B_2 0x27
+#define MICROREAD_GATE_ID_MCARD_ISO_CUSTOM 0x28
+#define MICROREAD_GATE_ID_SECURE_ELEMENT 0x2F
+
+/* P2P */
+#define MICROREAD_GATE_ID_P2P_GEN 0x30
+#define MICROREAD_GATE_ID_P2P_TARGET 0x31
+#define MICROREAD_PAR_P2P_TARGET_MODE 0x01
+#define MICROREAD_PAR_P2P_TARGET_GT 0x04
+#define MICROREAD_GATE_ID_P2P_INITIATOR 0x32
+#define MICROREAD_PAR_P2P_INITIATOR_GI 0x01
+#define MICROREAD_PAR_P2P_INITIATOR_GT 0x03
+
+/* Those pipes are created/opened by default in the chip */
+#define MICROREAD_PIPE_ID_LMS 0x00
+#define MICROREAD_PIPE_ID_ADMIN 0x01
+#define MICROREAD_PIPE_ID_MGT 0x02
+#define MICROREAD_PIPE_ID_OS 0x03
+#define MICROREAD_PIPE_ID_HDS_LOOPBACK 0x04
+#define MICROREAD_PIPE_ID_HDS_IDT 0x05
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B 0x08
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_BPRIME 0x09
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_A 0x0A
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_3 0x0B
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_2 0x0C
+#define MICROREAD_PIPE_ID_HDS_MCARD_NFC_T3 0x0D
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B_2 0x0E
+#define MICROREAD_PIPE_ID_HDS_MCARD_CUSTOM 0x0F
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B 0x10
+#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1 0x11
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A 0x12
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_3 0x13
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_2 0x14
+#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3 0x15
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B_3 0x16
+#define MICROREAD_PIPE_ID_HDS_MREAD_BPRIME 0x17
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3 0x18
+#define MICROREAD_PIPE_ID_HDS_MREAD_GEN 0x1B
+#define MICROREAD_PIPE_ID_HDS_STACKED_ELEMENT 0x1C
+#define MICROREAD_PIPE_ID_HDS_INSTANCES 0x1D
+#define MICROREAD_PIPE_ID_HDS_TESTRF 0x1E
+#define MICROREAD_PIPE_ID_HDS_P2P_TARGET 0x1F
+#define MICROREAD_PIPE_ID_HDS_P2P_INITIATOR 0x20
+
+/* Events */
+#define MICROREAD_EVT_MREAD_DISCOVERY_OCCURED NFC_HCI_EVT_TARGET_DISCOVERED
+#define MICROREAD_EVT_MREAD_CARD_FOUND 0x3D
+#define MICROREAD_EMCF_A_ATQA 0
+#define MICROREAD_EMCF_A_SAK 2
+#define MICROREAD_EMCF_A_LEN 3
+#define MICROREAD_EMCF_A_UID 4
+#define MICROREAD_EMCF_A3_ATQA 0
+#define MICROREAD_EMCF_A3_SAK 2
+#define MICROREAD_EMCF_A3_LEN 3
+#define MICROREAD_EMCF_A3_UID 4
+#define MICROREAD_EMCF_B_UID 0
+#define MICROREAD_EMCF_T1_ATQA 0
+#define MICROREAD_EMCF_T1_UID 4
+#define MICROREAD_EMCF_T3_UID 0
+#define MICROREAD_EVT_MREAD_DISCOVERY_START NFC_HCI_EVT_READER_REQUESTED
+#define MICROREAD_EVT_MREAD_DISCOVERY_START_SOME 0x3E
+#define MICROREAD_EVT_MREAD_DISCOVERY_STOP NFC_HCI_EVT_END_OPERATION
+#define MICROREAD_EVT_MREAD_SIM_REQUESTS 0x3F
+#define MICROREAD_EVT_MCARD_EXCHANGE NFC_HCI_EVT_TARGET_DISCOVERED
+#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF 0x20
+#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF 0x21
+#define MICROREAD_EVT_MCARD_FIELD_ON 0x11
+#define MICROREAD_EVT_P2P_TARGET_ACTIVATED 0x13
+#define MICROREAD_EVT_P2P_TARGET_DEACTIVATED 0x12
+#define MICROREAD_EVT_MCARD_FIELD_OFF 0x14
+
+/* Commands */
+#define MICROREAD_CMD_MREAD_EXCHANGE 0x10
+#define MICROREAD_CMD_MREAD_SUBSCRIBE 0x3F
+
+/* Hosts IDs */
+#define MICROREAD_ELT_ID_HDS NFC_HCI_TERMINAL_HOST_ID
+#define MICROREAD_ELT_ID_SIM NFC_HCI_UICC_HOST_ID
+#define MICROREAD_ELT_ID_SE1 0x03
+#define MICROREAD_ELT_ID_SE2 0x04
+#define MICROREAD_ELT_ID_SE3 0x05
+
+static struct nfc_hci_gate microread_gates[] = {
+	{MICROREAD_GATE_ID_ADM, MICROREAD_PIPE_ID_ADMIN},
+	{MICROREAD_GATE_ID_LOOPBACK, MICROREAD_PIPE_ID_HDS_LOOPBACK},
+	{MICROREAD_GATE_ID_IDT, MICROREAD_PIPE_ID_HDS_IDT},
+	{MICROREAD_GATE_ID_LMS, MICROREAD_PIPE_ID_LMS},
+	{MICROREAD_GATE_ID_MREAD_ISO_B, MICROREAD_PIPE_ID_HDS_MREAD_ISO_B},
+	{MICROREAD_GATE_ID_MREAD_ISO_A, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A},
+	{MICROREAD_GATE_ID_MREAD_ISO_A_3, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3},
+	{MICROREAD_GATE_ID_MGT, MICROREAD_PIPE_ID_MGT},
+	{MICROREAD_GATE_ID_OS, MICROREAD_PIPE_ID_OS},
+	{MICROREAD_GATE_ID_MREAD_NFC_T1, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1},
+	{MICROREAD_GATE_ID_MREAD_NFC_T3, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3},
+	{MICROREAD_GATE_ID_P2P_TARGET, MICROREAD_PIPE_ID_HDS_P2P_TARGET},
+	{MICROREAD_GATE_ID_P2P_INITIATOR, MICROREAD_PIPE_ID_HDS_P2P_INITIATOR}
+};
+
+/* Largest headroom needed for outgoing custom commands */
+#define MICROREAD_CMDS_HEADROOM	2
+#define MICROREAD_CMD_TAILROOM	2
+
+struct microread_info {
+	struct nfc_phy_ops *phy_ops;
+	void *phy_id;
+
+	struct nfc_hci_dev *hdev;
+
+	int async_cb_type;
+	data_exchange_cb_t async_cb;
+	void *async_cb_context;
+};
+
+static int microread_open(struct nfc_hci_dev *hdev)
+{
+	struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+	return info->phy_ops->enable(info->phy_id);
+}
+
+static void microread_close(struct nfc_hci_dev *hdev)
+{
+	struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+	info->phy_ops->disable(info->phy_id);
+}
+
+static int microread_hci_ready(struct nfc_hci_dev *hdev)
+{
+	int r;
+	u8 param[4];
+
+	param[0] = 0x03;
+	r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A,
+			     MICROREAD_CMD_MREAD_SUBSCRIBE, param, 1, NULL);
+	if (r)
+		return r;
+
+	r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A_3,
+			     MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL);
+	if (r)
+		return r;
+
+	param[0] = 0x00;
+	param[1] = 0x03;
+	param[2] = 0x00;
+	r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_B,
+			     MICROREAD_CMD_MREAD_SUBSCRIBE, param, 3, NULL);
+	if (r)
+		return r;
+
+	r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T1,
+			     MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL);
+	if (r)
+		return r;
+
+	param[0] = 0xFF;
+	param[1] = 0xFF;
+	param[2] = 0x00;
+	param[3] = 0x00;
+	r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T3,
+			     MICROREAD_CMD_MREAD_SUBSCRIBE, param, 4, NULL);
+
+	return r;
+}
+
+static int microread_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+	return info->phy_ops->write(info->phy_id, skb);
+}
+
+static int microread_start_poll(struct nfc_hci_dev *hdev,
+				u32 im_protocols, u32 tm_protocols)
+{
+	int r;
+
+	u8 param[2];
+	u8 mode;
+
+	param[0] = 0x00;
+	param[1] = 0x00;
+
+	if (im_protocols & NFC_PROTO_ISO14443_MASK)
+		param[0] |= (1 << 2);
+
+	if (im_protocols & NFC_PROTO_ISO14443_B_MASK)
+		param[0] |= 1;
+
+	if (im_protocols & NFC_PROTO_MIFARE_MASK)
+		param[1] |= 1;
+
+	if (im_protocols & NFC_PROTO_JEWEL_MASK)
+		param[0] |= (1 << 1);
+
+	if (im_protocols & NFC_PROTO_FELICA_MASK)
+		param[0] |= (1 << 5);
+
+	if (im_protocols & NFC_PROTO_NFC_DEP_MASK)
+		param[1] |= (1 << 1);
+
+	if ((im_protocols | tm_protocols) & NFC_PROTO_NFC_DEP_MASK) {
+		hdev->gb = nfc_get_local_general_bytes(hdev->ndev,
+						       &hdev->gb_len);
+		if (hdev->gb == NULL || hdev->gb_len == 0) {
+			im_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+			tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+		}
+	}
+
+	r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A,
+			       MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0);
+	if (r)
+		return r;
+
+	mode = 0xff;
+	r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+			      MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1);
+	if (r)
+		return r;
+
+	if (im_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_INITIATOR,
+				      MICROREAD_PAR_P2P_INITIATOR_GI,
+				      hdev->gb, hdev->gb_len);
+		if (r)
+			return r;
+	}
+
+	if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+				      MICROREAD_PAR_P2P_TARGET_GT,
+				      hdev->gb, hdev->gb_len);
+		if (r)
+			return r;
+
+		mode = 0x02;
+		r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+				      MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1);
+		if (r)
+			return r;
+	}
+
+	return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A,
+				  MICROREAD_EVT_MREAD_DISCOVERY_START_SOME,
+				  param, 2);
+}
+
+static int microread_dep_link_up(struct nfc_hci_dev *hdev,
+				struct nfc_target *target, u8 comm_mode,
+				u8 *gb, size_t gb_len)
+{
+	struct sk_buff *rgb_skb = NULL;
+	int r;
+
+	r = nfc_hci_get_param(hdev, target->hci_reader_gate,
+			      MICROREAD_PAR_P2P_INITIATOR_GT, &rgb_skb);
+	if (r < 0)
+		return r;
+
+	if (rgb_skb->len == 0 || rgb_skb->len > NFC_GB_MAXSIZE) {
+		r = -EPROTO;
+		goto exit;
+	}
+
+	r = nfc_set_remote_general_bytes(hdev->ndev, rgb_skb->data,
+					 rgb_skb->len);
+	if (r == 0)
+		r = nfc_dep_link_is_up(hdev->ndev, target->idx, comm_mode,
+				       NFC_RF_INITIATOR);
+exit:
+	kfree_skb(rgb_skb);
+
+	return r;
+}
+
+static int microread_dep_link_down(struct nfc_hci_dev *hdev)
+{
+	return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_INITIATOR,
+				  MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0);
+}
+
+static int microread_target_from_gate(struct nfc_hci_dev *hdev, u8 gate,
+				      struct nfc_target *target)
+{
+	switch (gate) {
+	case MICROREAD_GATE_ID_P2P_INITIATOR:
+		target->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+		break;
+	default:
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+static int microread_complete_target_discovered(struct nfc_hci_dev *hdev,
+						u8 gate,
+						struct nfc_target *target)
+{
+	return 0;
+}
+
+#define MICROREAD_CB_TYPE_READER_ALL 1
+
+static void microread_im_transceive_cb(void *context, struct sk_buff *skb,
+				       int err)
+{
+	struct microread_info *info = context;
+
+	switch (info->async_cb_type) {
+	case MICROREAD_CB_TYPE_READER_ALL:
+		if (err == 0) {
+			if (skb->len == 0) {
+				err = -EPROTO;
+				kfree_skb(skb);
+				info->async_cb(info->async_cb_context, NULL,
+					       -EPROTO);
+				return;
+			}
+
+			if (skb->data[skb->len - 1] != 0) {
+				err = nfc_hci_result_to_errno(
+						       skb->data[skb->len - 1]);
+				kfree_skb(skb);
+				info->async_cb(info->async_cb_context, NULL,
+					       err);
+				return;
+			}
+
+			skb_trim(skb, skb->len - 1);	/* RF Error ind. */
+		}
+		info->async_cb(info->async_cb_context, skb, err);
+		break;
+	default:
+		if (err == 0)
+			kfree_skb(skb);
+		break;
+	}
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the data exchange
+ *    1: driver doesn't especially handle, please do standard processing
+ */
+static int microread_im_transceive(struct nfc_hci_dev *hdev,
+				   struct nfc_target *target,
+				   struct sk_buff *skb, data_exchange_cb_t cb,
+				   void *cb_context)
+{
+	struct microread_info *info = nfc_hci_get_clientdata(hdev);
+	u8 control_bits;
+	u16 crc;
+
+	pr_info("data exchange to gate 0x%x\n", target->hci_reader_gate);
+
+	if (target->hci_reader_gate == MICROREAD_GATE_ID_P2P_INITIATOR) {
+		*(u8 *)skb_push(skb, 1) = 0;
+
+		return nfc_hci_send_event(hdev, target->hci_reader_gate,
+				     MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF,
+				     skb->data, skb->len);
+	}
+
+	switch (target->hci_reader_gate) {
+	case MICROREAD_GATE_ID_MREAD_ISO_A:
+		control_bits = 0xCB;
+		break;
+	case MICROREAD_GATE_ID_MREAD_ISO_A_3:
+		control_bits = 0xCB;
+		break;
+	case MICROREAD_GATE_ID_MREAD_ISO_B:
+		control_bits = 0xCB;
+		break;
+	case MICROREAD_GATE_ID_MREAD_NFC_T1:
+		control_bits = 0x1B;
+
+		crc = crc_ccitt(0xffff, skb->data, skb->len);
+		crc = ~crc;
+		skb_put_u8(skb, crc & 0xff);
+		skb_put_u8(skb, crc >> 8);
+		break;
+	case MICROREAD_GATE_ID_MREAD_NFC_T3:
+		control_bits = 0xDB;
+		break;
+	default:
+		pr_info("Abort im_transceive to invalid gate 0x%x\n",
+			target->hci_reader_gate);
+		return 1;
+	}
+
+	*(u8 *)skb_push(skb, 1) = control_bits;
+
+	info->async_cb_type = MICROREAD_CB_TYPE_READER_ALL;
+	info->async_cb = cb;
+	info->async_cb_context = cb_context;
+
+	return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+				      MICROREAD_CMD_MREAD_EXCHANGE,
+				      skb->data, skb->len,
+				      microread_im_transceive_cb, info);
+}
+
+static int microread_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	int r;
+
+	r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+			       MICROREAD_EVT_MCARD_EXCHANGE,
+			       skb->data, skb->len);
+
+	kfree_skb(skb);
+
+	return r;
+}
+
+static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate,
+					struct sk_buff *skb)
+{
+	struct nfc_target *targets;
+	int r = 0;
+
+	pr_info("target discovered to gate 0x%x\n", gate);
+
+	targets = kzalloc(sizeof(struct nfc_target), GFP_KERNEL);
+	if (targets == NULL) {
+		r = -ENOMEM;
+		goto exit;
+	}
+
+	targets->hci_reader_gate = gate;
+
+	switch (gate) {
+	case MICROREAD_GATE_ID_MREAD_ISO_A:
+		targets->supported_protocols =
+		      nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A_SAK]);
+		targets->sens_res =
+			 be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]);
+		targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK];
+		targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN];
+		if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+			r = -EINVAL;
+			goto exit_free;
+		}
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
+		       targets->nfcid1_len);
+		break;
+	case MICROREAD_GATE_ID_MREAD_ISO_A_3:
+		targets->supported_protocols =
+		      nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A3_SAK]);
+		targets->sens_res =
+			 be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]);
+		targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK];
+		targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN];
+		if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+			r = -EINVAL;
+			goto exit_free;
+		}
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
+		       targets->nfcid1_len);
+		break;
+	case MICROREAD_GATE_ID_MREAD_ISO_B:
+		targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK;
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_B_UID], 4);
+		targets->nfcid1_len = 4;
+		break;
+	case MICROREAD_GATE_ID_MREAD_NFC_T1:
+		targets->supported_protocols = NFC_PROTO_JEWEL_MASK;
+		targets->sens_res =
+			le16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_T1_ATQA]);
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T1_UID], 4);
+		targets->nfcid1_len = 4;
+		break;
+	case MICROREAD_GATE_ID_MREAD_NFC_T3:
+		targets->supported_protocols = NFC_PROTO_FELICA_MASK;
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T3_UID], 8);
+		targets->nfcid1_len = 8;
+		break;
+	default:
+		pr_info("discard target discovered to gate 0x%x\n", gate);
+		goto exit_free;
+	}
+
+	r = nfc_targets_found(hdev->ndev, targets, 1);
+
+exit_free:
+	kfree(targets);
+
+exit:
+	kfree_skb(skb);
+
+	if (r)
+		pr_err("Failed to handle discovered target err=%d\n", r);
+}
+
+static int microread_event_received(struct nfc_hci_dev *hdev, u8 pipe,
+				     u8 event, struct sk_buff *skb)
+{
+	int r;
+	u8 gate = hdev->pipes[pipe].gate;
+	u8 mode;
+
+	pr_info("Microread received event 0x%x to gate 0x%x\n", event, gate);
+
+	switch (event) {
+	case MICROREAD_EVT_MREAD_CARD_FOUND:
+		microread_target_discovered(hdev, gate, skb);
+		return 0;
+
+	case MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF:
+		if (skb->len < 1) {
+			kfree_skb(skb);
+			return -EPROTO;
+		}
+
+		if (skb->data[skb->len - 1]) {
+			kfree_skb(skb);
+			return -EIO;
+		}
+
+		skb_trim(skb, skb->len - 1);
+
+		r = nfc_tm_data_received(hdev->ndev, skb);
+		break;
+
+	case MICROREAD_EVT_MCARD_FIELD_ON:
+	case MICROREAD_EVT_MCARD_FIELD_OFF:
+		kfree_skb(skb);
+		return 0;
+
+	case MICROREAD_EVT_P2P_TARGET_ACTIVATED:
+		r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK,
+				     NFC_COMM_PASSIVE, skb->data,
+				     skb->len);
+
+		kfree_skb(skb);
+		break;
+
+	case MICROREAD_EVT_MCARD_EXCHANGE:
+		if (skb->len < 1) {
+			kfree_skb(skb);
+			return -EPROTO;
+		}
+
+		if (skb->data[skb->len-1]) {
+			kfree_skb(skb);
+			return -EIO;
+		}
+
+		skb_trim(skb, skb->len - 1);
+
+		r = nfc_tm_data_received(hdev->ndev, skb);
+		break;
+
+	case MICROREAD_EVT_P2P_TARGET_DEACTIVATED:
+		kfree_skb(skb);
+
+		mode = 0xff;
+		r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+				      MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1);
+		if (r)
+			break;
+
+		r = nfc_hci_send_event(hdev, gate,
+				       MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL,
+				       0);
+		break;
+
+	default:
+		return 1;
+	}
+
+	return r;
+}
+
+static struct nfc_hci_ops microread_hci_ops = {
+	.open = microread_open,
+	.close = microread_close,
+	.hci_ready = microread_hci_ready,
+	.xmit = microread_xmit,
+	.start_poll = microread_start_poll,
+	.dep_link_up = microread_dep_link_up,
+	.dep_link_down = microread_dep_link_down,
+	.target_from_gate = microread_target_from_gate,
+	.complete_target_discovered = microread_complete_target_discovered,
+	.im_transceive = microread_im_transceive,
+	.tm_send = microread_tm_send,
+	.check_presence = NULL,
+	.event_received = microread_event_received,
+};
+
+int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
+		    int phy_headroom, int phy_tailroom, int phy_payload,
+		    struct nfc_hci_dev **hdev)
+{
+	struct microread_info *info;
+	unsigned long quirks = 0;
+	u32 protocols;
+	struct nfc_hci_init_data init_data;
+	int r;
+
+	info = kzalloc(sizeof(struct microread_info), GFP_KERNEL);
+	if (!info) {
+		r = -ENOMEM;
+		goto err_info_alloc;
+	}
+
+	info->phy_ops = phy_ops;
+	info->phy_id = phy_id;
+
+	init_data.gate_count = ARRAY_SIZE(microread_gates);
+	memcpy(init_data.gates, microread_gates, sizeof(microread_gates));
+
+	strcpy(init_data.session_id, "MICROREA");
+
+	set_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &quirks);
+
+	protocols = NFC_PROTO_JEWEL_MASK |
+		    NFC_PROTO_MIFARE_MASK |
+		    NFC_PROTO_FELICA_MASK |
+		    NFC_PROTO_ISO14443_MASK |
+		    NFC_PROTO_ISO14443_B_MASK |
+		    NFC_PROTO_NFC_DEP_MASK;
+
+	info->hdev = nfc_hci_allocate_device(&microread_hci_ops, &init_data,
+					     quirks, protocols, llc_name,
+					     phy_headroom +
+					     MICROREAD_CMDS_HEADROOM,
+					     phy_tailroom +
+					     MICROREAD_CMD_TAILROOM,
+					     phy_payload);
+	if (!info->hdev) {
+		pr_err("Cannot allocate nfc hdev\n");
+		r = -ENOMEM;
+		goto err_alloc_hdev;
+	}
+
+	nfc_hci_set_clientdata(info->hdev, info);
+
+	r = nfc_hci_register_device(info->hdev);
+	if (r)
+		goto err_regdev;
+
+	*hdev = info->hdev;
+
+	return 0;
+
+err_regdev:
+	nfc_hci_free_device(info->hdev);
+
+err_alloc_hdev:
+	kfree(info);
+
+err_info_alloc:
+	return r;
+}
+EXPORT_SYMBOL(microread_probe);
+
+void microread_remove(struct nfc_hci_dev *hdev)
+{
+	struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+	nfc_hci_unregister_device(hdev);
+	nfc_hci_free_device(hdev);
+	kfree(info);
+}
+EXPORT_SYMBOL(microread_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/microread/microread.h b/drivers/nfc/microread/microread.h
new file mode 100644
index 000000000..f53864143
--- /dev/null
+++ b/drivers/nfc/microread/microread.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2011 - 2012  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_MICROREAD_H_
+#define __LOCAL_MICROREAD_H_
+
+#include <net/nfc/hci.h>
+
+#define DRIVER_DESC "NFC driver for microread"
+
+int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
+		    int phy_headroom, int phy_tailroom, int phy_payload,
+		    struct nfc_hci_dev **hdev);
+
+void microread_remove(struct nfc_hci_dev *hdev);
+
+#endif /* __LOCAL_MICROREAD_H_ */
diff --git a/drivers/nfc/nfcmrvl/Kconfig b/drivers/nfc/nfcmrvl/Kconfig
new file mode 100644
index 000000000..670af7692
--- /dev/null
+++ b/drivers/nfc/nfcmrvl/Kconfig
@@ -0,0 +1,54 @@
+config NFC_MRVL
+	tristate
+	help
+	  The core driver to support Marvell NFC devices.
+
+	  This driver is required if you want to support
+	  Marvell NFC device 8897.
+
+config NFC_MRVL_USB
+	tristate "Marvell NFC-over-USB driver"
+	depends on NFC_NCI && USB
+	select NFC_MRVL
+	help
+	  Marvell NFC-over-USB driver.
+
+	  This driver provides support for Marvell NFC-over-USB devices:
+          8897.
+
+	  Say Y here to compile support for Marvell NFC-over-USB driver
+	  into the kernel or say M to compile it as module.
+
+config NFC_MRVL_UART
+	tristate "Marvell NFC-over-UART driver"
+	depends on NFC_NCI && NFC_NCI_UART
+	select NFC_MRVL
+	help
+	  Marvell NFC-over-UART driver.
+
+	  This driver provides support for Marvell NFC-over-UART devices
+
+	  Say Y here to compile support for Marvell NFC-over-UART driver
+	  into the kernel or say M to compile it as module.
+
+config NFC_MRVL_I2C
+	tristate "Marvell NFC-over-I2C driver"
+	depends on NFC_MRVL && I2C
+	help
+	  Marvell NFC-over-I2C driver.
+
+	  This driver provides support for Marvell NFC-over-I2C devices.
+
+	  Say Y here to compile support for Marvell NFC-over-I2C driver
+	  into the kernel or say M to compile it as module.
+
+config NFC_MRVL_SPI
+	tristate "Marvell NFC-over-SPI driver"
+	depends on NFC_MRVL && NFC_NCI_SPI
+	help
+	  Marvell NFC-over-SPI driver.
+
+	  This driver provides support for Marvell NFC-over-SPI devices.
+
+	  Say Y here to compile support for Marvell NFC-over-SPI driver
+	  into the kernel or say M to compile it as module.
diff --git a/drivers/nfc/nfcmrvl/Makefile b/drivers/nfc/nfcmrvl/Makefile
new file mode 100644
index 000000000..e74de0cb3
--- /dev/null
+++ b/drivers/nfc/nfcmrvl/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for NFCMRVL NCI based NFC driver
+#
+
+nfcmrvl-y += main.o fw_dnld.o
+obj-$(CONFIG_NFC_MRVL) += nfcmrvl.o
+
+nfcmrvl_usb-y += usb.o
+obj-$(CONFIG_NFC_MRVL_USB) += nfcmrvl_usb.o
+
+nfcmrvl_uart-y += uart.o
+obj-$(CONFIG_NFC_MRVL_UART) += nfcmrvl_uart.o
+
+nfcmrvl_i2c-y += i2c.o
+obj-$(CONFIG_NFC_MRVL_I2C) += nfcmrvl_i2c.o
+
+nfcmrvl_spi-y += spi.o
+obj-$(CONFIG_NFC_MRVL_SPI) += nfcmrvl_spi.o
diff --git a/drivers/nfc/nfcmrvl/fw_dnld.c b/drivers/nfc/nfcmrvl/fw_dnld.c
new file mode 100644
index 000000000..52c8ae504
--- /dev/null
+++ b/drivers/nfc/nfcmrvl/fw_dnld.c
@@ -0,0 +1,559 @@
+/*
+ * Marvell NFC driver: Firmware downloader
+ *
+ * Copyright (C) 2015, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include <linux/module.h>
+#include <asm/unaligned.h>
+#include <linux/firmware.h>
+#include <linux/nfc.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+#include "nfcmrvl.h"
+
+#define FW_DNLD_TIMEOUT			15000
+
+#define NCI_OP_PROPRIETARY_BOOT_CMD	nci_opcode_pack(NCI_GID_PROPRIETARY, \
+							NCI_OP_PROP_BOOT_CMD)
+
+/* FW download states */
+
+enum {
+	STATE_RESET = 0,
+	STATE_INIT,
+	STATE_SET_REF_CLOCK,
+	STATE_SET_HI_CONFIG,
+	STATE_OPEN_LC,
+	STATE_FW_DNLD,
+	STATE_CLOSE_LC,
+	STATE_BOOT
+};
+
+enum {
+	SUBSTATE_WAIT_COMMAND = 0,
+	SUBSTATE_WAIT_ACK_CREDIT,
+	SUBSTATE_WAIT_NACK_CREDIT,
+	SUBSTATE_WAIT_DATA_CREDIT,
+};
+
+/*
+** Patterns for responses
+*/
+
+static const uint8_t nci_pattern_core_reset_ntf[] = {
+	0x60, 0x00, 0x02, 0xA0, 0x01
+};
+
+static const uint8_t nci_pattern_core_init_rsp[] = {
+	0x40, 0x01, 0x11
+};
+
+static const uint8_t nci_pattern_core_set_config_rsp[] = {
+	0x40, 0x02, 0x02, 0x00, 0x00
+};
+
+static const uint8_t nci_pattern_core_conn_create_rsp[] = {
+	0x40, 0x04, 0x04, 0x00
+};
+
+static const uint8_t nci_pattern_core_conn_close_rsp[] = {
+	0x40, 0x05, 0x01, 0x00
+};
+
+static const uint8_t nci_pattern_core_conn_credits_ntf[] = {
+	0x60, 0x06, 0x03, 0x01, NCI_CORE_LC_CONNID_PROP_FW_DL, 0x01
+};
+
+static const uint8_t nci_pattern_proprietary_boot_rsp[] = {
+	0x4F, 0x3A, 0x01, 0x00
+};
+
+static struct sk_buff *alloc_lc_skb(struct nfcmrvl_private *priv, uint8_t plen)
+{
+	struct sk_buff *skb;
+	struct nci_data_hdr *hdr;
+
+	skb = nci_skb_alloc(priv->ndev, (NCI_DATA_HDR_SIZE + plen), GFP_KERNEL);
+	if (!skb) {
+		pr_err("no memory for data\n");
+		return NULL;
+	}
+
+	hdr = skb_put(skb, NCI_DATA_HDR_SIZE);
+	hdr->conn_id = NCI_CORE_LC_CONNID_PROP_FW_DL;
+	hdr->rfu = 0;
+	hdr->plen = plen;
+
+	nci_mt_set((__u8 *)hdr, NCI_MT_DATA_PKT);
+	nci_pbf_set((__u8 *)hdr, NCI_PBF_LAST);
+
+	return skb;
+}
+
+static void fw_dnld_over(struct nfcmrvl_private *priv, u32 error)
+{
+	if (priv->fw_dnld.fw) {
+		release_firmware(priv->fw_dnld.fw);
+		priv->fw_dnld.fw = NULL;
+		priv->fw_dnld.header = NULL;
+		priv->fw_dnld.binary_config = NULL;
+	}
+
+	atomic_set(&priv->ndev->cmd_cnt, 0);
+
+	if (timer_pending(&priv->ndev->cmd_timer))
+		del_timer_sync(&priv->ndev->cmd_timer);
+
+	if (timer_pending(&priv->fw_dnld.timer))
+		del_timer_sync(&priv->fw_dnld.timer);
+
+	nfc_info(priv->dev, "FW loading over (%d)]\n", error);
+
+	if (error != 0) {
+		/* failed, halt the chip to avoid power consumption */
+		nfcmrvl_chip_halt(priv);
+	}
+
+	nfc_fw_download_done(priv->ndev->nfc_dev, priv->fw_dnld.name, error);
+}
+
+static void fw_dnld_timeout(struct timer_list *t)
+{
+	struct nfcmrvl_private *priv = from_timer(priv, t, fw_dnld.timer);
+
+	nfc_err(priv->dev, "FW loading timeout");
+	priv->fw_dnld.state = STATE_RESET;
+	fw_dnld_over(priv, -ETIMEDOUT);
+}
+
+static int process_state_reset(struct nfcmrvl_private *priv,
+			       struct sk_buff *skb)
+{
+	if (sizeof(nci_pattern_core_reset_ntf) != skb->len ||
+	    memcmp(skb->data, nci_pattern_core_reset_ntf,
+		   sizeof(nci_pattern_core_reset_ntf)))
+		return -EINVAL;
+
+	nfc_info(priv->dev, "BootROM reset, start fw download\n");
+
+	/* Start FW download state machine */
+	priv->fw_dnld.state = STATE_INIT;
+	nci_send_cmd(priv->ndev, NCI_OP_CORE_INIT_CMD, 0, NULL);
+
+	return 0;
+}
+
+static int process_state_init(struct nfcmrvl_private *priv, struct sk_buff *skb)
+{
+	struct nci_core_set_config_cmd cmd;
+
+	if (sizeof(nci_pattern_core_init_rsp) >= skb->len ||
+	    memcmp(skb->data, nci_pattern_core_init_rsp,
+		   sizeof(nci_pattern_core_init_rsp)))
+		return -EINVAL;
+
+	cmd.num_params = 1;
+	cmd.param.id = NFCMRVL_PROP_REF_CLOCK;
+	cmd.param.len = 4;
+	memcpy(cmd.param.val, &priv->fw_dnld.header->ref_clock, 4);
+
+	nci_send_cmd(priv->ndev, NCI_OP_CORE_SET_CONFIG_CMD, 3 + cmd.param.len,
+		     &cmd);
+
+	priv->fw_dnld.state = STATE_SET_REF_CLOCK;
+	return 0;
+}
+
+static void create_lc(struct nfcmrvl_private *priv)
+{
+	uint8_t param[2] = { NCI_CORE_LC_PROP_FW_DL, 0x0 };
+
+	priv->fw_dnld.state = STATE_OPEN_LC;
+	nci_send_cmd(priv->ndev, NCI_OP_CORE_CONN_CREATE_CMD, 2, param);
+}
+
+static int process_state_set_ref_clock(struct nfcmrvl_private *priv,
+				       struct sk_buff *skb)
+{
+	struct nci_core_set_config_cmd cmd;
+
+	if (sizeof(nci_pattern_core_set_config_rsp) != skb->len ||
+	    memcmp(skb->data, nci_pattern_core_set_config_rsp, skb->len))
+		return -EINVAL;
+
+	cmd.num_params = 1;
+	cmd.param.id = NFCMRVL_PROP_SET_HI_CONFIG;
+
+	switch (priv->phy) {
+	case NFCMRVL_PHY_UART:
+		cmd.param.len = 5;
+		memcpy(cmd.param.val,
+		       &priv->fw_dnld.binary_config->uart.baudrate,
+		       4);
+		cmd.param.val[4] =
+			priv->fw_dnld.binary_config->uart.flow_control;
+		break;
+	case NFCMRVL_PHY_I2C:
+		cmd.param.len = 5;
+		memcpy(cmd.param.val,
+		       &priv->fw_dnld.binary_config->i2c.clk,
+		       4);
+		cmd.param.val[4] = 0;
+		break;
+	case NFCMRVL_PHY_SPI:
+		cmd.param.len = 5;
+		memcpy(cmd.param.val,
+		       &priv->fw_dnld.binary_config->spi.clk,
+		       4);
+		cmd.param.val[4] = 0;
+		break;
+	default:
+		create_lc(priv);
+		return 0;
+	}
+
+	priv->fw_dnld.state = STATE_SET_HI_CONFIG;
+	nci_send_cmd(priv->ndev, NCI_OP_CORE_SET_CONFIG_CMD, 3 + cmd.param.len,
+		     &cmd);
+	return 0;
+}
+
+static int process_state_set_hi_config(struct nfcmrvl_private *priv,
+				       struct sk_buff *skb)
+{
+	if (sizeof(nci_pattern_core_set_config_rsp) != skb->len ||
+	    memcmp(skb->data, nci_pattern_core_set_config_rsp, skb->len))
+		return -EINVAL;
+
+	create_lc(priv);
+	return 0;
+}
+
+static int process_state_open_lc(struct nfcmrvl_private *priv,
+				 struct sk_buff *skb)
+{
+	if (sizeof(nci_pattern_core_conn_create_rsp) >= skb->len ||
+	    memcmp(skb->data, nci_pattern_core_conn_create_rsp,
+		   sizeof(nci_pattern_core_conn_create_rsp)))
+		return -EINVAL;
+
+	priv->fw_dnld.state = STATE_FW_DNLD;
+	priv->fw_dnld.substate = SUBSTATE_WAIT_COMMAND;
+	priv->fw_dnld.offset = priv->fw_dnld.binary_config->offset;
+	return 0;
+}
+
+static int process_state_fw_dnld(struct nfcmrvl_private *priv,
+				 struct sk_buff *skb)
+{
+	uint16_t len;
+	uint16_t comp_len;
+	struct sk_buff *out_skb;
+
+	switch (priv->fw_dnld.substate) {
+	case SUBSTATE_WAIT_COMMAND:
+		/*
+		 * Command format:
+		 * B0..2: NCI header
+		 * B3   : Helper command (0xA5)
+		 * B4..5: le16 data size
+		 * B6..7: le16 data size complement (~)
+		 * B8..N: payload
+		 */
+
+		/* Remove NCI HDR */
+		skb_pull(skb, 3);
+		if (skb->data[0] != HELPER_CMD_PACKET_FORMAT || skb->len != 5) {
+			nfc_err(priv->dev, "bad command");
+			return -EINVAL;
+		}
+		skb_pull(skb, 1);
+		len = get_unaligned_le16(skb->data);
+		skb_pull(skb, 2);
+		comp_len = get_unaligned_le16(skb->data);
+		memcpy(&comp_len, skb->data, 2);
+		skb_pull(skb, 2);
+		if (((~len) & 0xFFFF) != comp_len) {
+			nfc_err(priv->dev, "bad len complement: %x %x %x",
+				len, comp_len, (~len & 0xFFFF));
+			out_skb = alloc_lc_skb(priv, 1);
+			if (!out_skb)
+				return -ENOMEM;
+			skb_put_u8(out_skb, 0xBF);
+			nci_send_frame(priv->ndev, out_skb);
+			priv->fw_dnld.substate = SUBSTATE_WAIT_NACK_CREDIT;
+			return 0;
+		}
+		priv->fw_dnld.chunk_len = len;
+		out_skb = alloc_lc_skb(priv, 1);
+		if (!out_skb)
+			return -ENOMEM;
+		skb_put_u8(out_skb, HELPER_ACK_PACKET_FORMAT);
+		nci_send_frame(priv->ndev, out_skb);
+		priv->fw_dnld.substate = SUBSTATE_WAIT_ACK_CREDIT;
+		break;
+
+	case SUBSTATE_WAIT_ACK_CREDIT:
+		if (sizeof(nci_pattern_core_conn_credits_ntf) != skb->len ||
+		    memcmp(nci_pattern_core_conn_credits_ntf, skb->data,
+			   skb->len)) {
+			nfc_err(priv->dev, "bad packet: waiting for credit");
+			return -EINVAL;
+		}
+		if (priv->fw_dnld.chunk_len == 0) {
+			/* FW Loading is done */
+			uint8_t conn_id = NCI_CORE_LC_CONNID_PROP_FW_DL;
+
+			priv->fw_dnld.state = STATE_CLOSE_LC;
+			nci_send_cmd(priv->ndev, NCI_OP_CORE_CONN_CLOSE_CMD,
+				     1, &conn_id);
+		} else {
+			out_skb = alloc_lc_skb(priv, priv->fw_dnld.chunk_len);
+			if (!out_skb)
+				return -ENOMEM;
+			skb_put_data(out_skb,
+				     ((uint8_t *)priv->fw_dnld.fw->data) + priv->fw_dnld.offset,
+				     priv->fw_dnld.chunk_len);
+			nci_send_frame(priv->ndev, out_skb);
+			priv->fw_dnld.substate = SUBSTATE_WAIT_DATA_CREDIT;
+		}
+		break;
+
+	case SUBSTATE_WAIT_DATA_CREDIT:
+		if (sizeof(nci_pattern_core_conn_credits_ntf) != skb->len ||
+		    memcmp(nci_pattern_core_conn_credits_ntf, skb->data,
+			    skb->len)) {
+			nfc_err(priv->dev, "bad packet: waiting for credit");
+			return -EINVAL;
+		}
+		priv->fw_dnld.offset += priv->fw_dnld.chunk_len;
+		priv->fw_dnld.chunk_len = 0;
+		priv->fw_dnld.substate = SUBSTATE_WAIT_COMMAND;
+		break;
+
+	case SUBSTATE_WAIT_NACK_CREDIT:
+		if (sizeof(nci_pattern_core_conn_credits_ntf) != skb->len ||
+		    memcmp(nci_pattern_core_conn_credits_ntf, skb->data,
+			    skb->len)) {
+			nfc_err(priv->dev, "bad packet: waiting for credit");
+			return -EINVAL;
+		}
+		priv->fw_dnld.substate = SUBSTATE_WAIT_COMMAND;
+		break;
+	}
+	return 0;
+}
+
+static int process_state_close_lc(struct nfcmrvl_private *priv,
+				  struct sk_buff *skb)
+{
+	if (sizeof(nci_pattern_core_conn_close_rsp) != skb->len ||
+	    memcmp(skb->data, nci_pattern_core_conn_close_rsp, skb->len))
+		return -EINVAL;
+
+	priv->fw_dnld.state = STATE_BOOT;
+	nci_send_cmd(priv->ndev, NCI_OP_PROPRIETARY_BOOT_CMD, 0, NULL);
+	return 0;
+}
+
+static int process_state_boot(struct nfcmrvl_private *priv, struct sk_buff *skb)
+{
+	if (sizeof(nci_pattern_proprietary_boot_rsp) != skb->len ||
+	    memcmp(skb->data, nci_pattern_proprietary_boot_rsp, skb->len))
+		return -EINVAL;
+
+	/*
+	 * Update HI config to use the right configuration for the next
+	 * data exchanges.
+	 */
+	priv->if_ops->nci_update_config(priv,
+					&priv->fw_dnld.binary_config->config);
+
+	if (priv->fw_dnld.binary_config == &priv->fw_dnld.header->helper) {
+		/*
+		 * This is the case where an helper was needed and we have
+		 * uploaded it. Now we have to wait the next RESET NTF to start
+		 * FW download.
+		 */
+		priv->fw_dnld.state = STATE_RESET;
+		priv->fw_dnld.binary_config = &priv->fw_dnld.header->firmware;
+		nfc_info(priv->dev, "FW loading: helper loaded");
+	} else {
+		nfc_info(priv->dev, "FW loading: firmware loaded");
+		fw_dnld_over(priv, 0);
+	}
+	return 0;
+}
+
+static void fw_dnld_rx_work(struct work_struct *work)
+{
+	int ret;
+	struct sk_buff *skb;
+	struct nfcmrvl_fw_dnld *fw_dnld = container_of(work,
+						       struct nfcmrvl_fw_dnld,
+						       rx_work);
+	struct nfcmrvl_private *priv = container_of(fw_dnld,
+						    struct nfcmrvl_private,
+						    fw_dnld);
+
+	while ((skb = skb_dequeue(&fw_dnld->rx_q))) {
+		nfc_send_to_raw_sock(priv->ndev->nfc_dev, skb,
+				     RAW_PAYLOAD_NCI, NFC_DIRECTION_RX);
+		switch (fw_dnld->state) {
+		case STATE_RESET:
+			ret = process_state_reset(priv, skb);
+			break;
+		case STATE_INIT:
+			ret = process_state_init(priv, skb);
+			break;
+		case STATE_SET_REF_CLOCK:
+			ret = process_state_set_ref_clock(priv, skb);
+			break;
+		case STATE_SET_HI_CONFIG:
+			ret = process_state_set_hi_config(priv, skb);
+			break;
+		case STATE_OPEN_LC:
+			ret = process_state_open_lc(priv, skb);
+			break;
+		case STATE_FW_DNLD:
+			ret = process_state_fw_dnld(priv, skb);
+			break;
+		case STATE_CLOSE_LC:
+			ret = process_state_close_lc(priv, skb);
+			break;
+		case STATE_BOOT:
+			ret = process_state_boot(priv, skb);
+			break;
+		default:
+			ret = -EFAULT;
+		}
+
+		kfree_skb(skb);
+
+		if (ret != 0) {
+			nfc_err(priv->dev, "FW loading error");
+			fw_dnld_over(priv, ret);
+			break;
+		}
+	}
+}
+
+int	nfcmrvl_fw_dnld_init(struct nfcmrvl_private *priv)
+{
+	char name[32];
+
+	INIT_WORK(&priv->fw_dnld.rx_work, fw_dnld_rx_work);
+	snprintf(name, sizeof(name), "%s_nfcmrvl_fw_dnld_rx_wq",
+		 dev_name(&priv->ndev->nfc_dev->dev));
+	priv->fw_dnld.rx_wq = create_singlethread_workqueue(name);
+	if (!priv->fw_dnld.rx_wq)
+		return -ENOMEM;
+	skb_queue_head_init(&priv->fw_dnld.rx_q);
+	return 0;
+}
+
+void	nfcmrvl_fw_dnld_deinit(struct nfcmrvl_private *priv)
+{
+	destroy_workqueue(priv->fw_dnld.rx_wq);
+}
+
+void	nfcmrvl_fw_dnld_recv_frame(struct nfcmrvl_private *priv,
+				   struct sk_buff *skb)
+{
+	/* Discard command timer */
+	if (timer_pending(&priv->ndev->cmd_timer))
+		del_timer_sync(&priv->ndev->cmd_timer);
+
+	/* Allow next command */
+	atomic_set(&priv->ndev->cmd_cnt, 1);
+
+	/* Queue and trigger rx work */
+	skb_queue_tail(&priv->fw_dnld.rx_q, skb);
+	queue_work(priv->fw_dnld.rx_wq, &priv->fw_dnld.rx_work);
+}
+
+void nfcmrvl_fw_dnld_abort(struct nfcmrvl_private *priv)
+{
+	fw_dnld_over(priv, -EHOSTDOWN);
+}
+
+int nfcmrvl_fw_dnld_start(struct nci_dev *ndev, const char *firmware_name)
+{
+	struct nfcmrvl_private *priv = nci_get_drvdata(ndev);
+	struct nfcmrvl_fw_dnld *fw_dnld = &priv->fw_dnld;
+	int res;
+
+	if (!priv->support_fw_dnld)
+		return -ENOTSUPP;
+
+	if (!firmware_name || !firmware_name[0])
+		return -EINVAL;
+
+	strcpy(fw_dnld->name, firmware_name);
+
+	/*
+	 * Retrieve FW binary file and parse it to initialize FW download
+	 * state machine.
+	 */
+
+	/* Retrieve FW binary */
+	res = request_firmware(&fw_dnld->fw, firmware_name,
+			       &ndev->nfc_dev->dev);
+	if (res < 0) {
+		nfc_err(priv->dev, "failed to retrieve FW %s", firmware_name);
+		return -ENOENT;
+	}
+
+	fw_dnld->header = (const struct nfcmrvl_fw *) priv->fw_dnld.fw->data;
+
+	if (fw_dnld->header->magic != NFCMRVL_FW_MAGIC ||
+	    fw_dnld->header->phy != priv->phy) {
+		nfc_err(priv->dev, "bad firmware binary %s magic=0x%x phy=%d",
+			firmware_name, fw_dnld->header->magic,
+			fw_dnld->header->phy);
+		release_firmware(fw_dnld->fw);
+		fw_dnld->header = NULL;
+		return -EINVAL;
+	}
+
+	if (fw_dnld->header->helper.offset != 0) {
+		nfc_info(priv->dev, "loading helper");
+		fw_dnld->binary_config = &fw_dnld->header->helper;
+	} else {
+		nfc_info(priv->dev, "loading firmware");
+		fw_dnld->binary_config = &fw_dnld->header->firmware;
+	}
+
+	/* Configure a timer for timeout */
+	timer_setup(&priv->fw_dnld.timer, fw_dnld_timeout, 0);
+	mod_timer(&priv->fw_dnld.timer,
+		  jiffies + msecs_to_jiffies(FW_DNLD_TIMEOUT));
+
+	/* Ronfigure HI to be sure that it is the bootrom values */
+	priv->if_ops->nci_update_config(priv,
+					&fw_dnld->header->bootrom.config);
+
+	/* Allow first command */
+	atomic_set(&priv->ndev->cmd_cnt, 1);
+
+	/* First, reset the chip */
+	priv->fw_dnld.state = STATE_RESET;
+	nfcmrvl_chip_reset(priv);
+
+	/* Now wait for CORE_RESET_NTF or timeout */
+
+	return 0;
+}
diff --git a/drivers/nfc/nfcmrvl/fw_dnld.h b/drivers/nfc/nfcmrvl/fw_dnld.h
new file mode 100644
index 000000000..ee4a339c0
--- /dev/null
+++ b/drivers/nfc/nfcmrvl/fw_dnld.h
@@ -0,0 +1,98 @@
+/**
+ * Marvell NFC driver: Firmware downloader
+ *
+ * Copyright (C) 2015, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#ifndef __NFCMRVL_FW_DNLD_H__
+#define __NFCMRVL_FW_DNLD_H__
+
+#include <linux/workqueue.h>
+
+#define NFCMRVL_FW_MAGIC		0x88888888
+
+#define NCI_OP_PROP_BOOT_CMD		0x3A
+
+#define NCI_CORE_LC_PROP_FW_DL		0xFD
+#define NCI_CORE_LC_CONNID_PROP_FW_DL	0x02
+
+#define HELPER_CMD_ENTRY_POINT		0x04
+#define HELPER_CMD_PACKET_FORMAT	0xA5
+#define HELPER_ACK_PACKET_FORMAT	0x5A
+#define HELPER_RETRY_REQUESTED		(1 << 15)
+
+struct nfcmrvl_private;
+
+struct nfcmrvl_fw_uart_config {
+	uint8_t flow_control;
+	uint32_t baudrate;
+} __packed;
+
+struct nfcmrvl_fw_i2c_config {
+	uint32_t clk;
+} __packed;
+
+struct nfcmrvl_fw_spi_config {
+	uint32_t clk;
+} __packed;
+
+struct nfcmrvl_fw_binary_config {
+	uint32_t offset;
+	union {
+		void *config;
+		struct nfcmrvl_fw_uart_config uart;
+		struct nfcmrvl_fw_i2c_config i2c;
+		struct nfcmrvl_fw_spi_config spi;
+		uint8_t reserved[64];
+	};
+} __packed;
+
+struct nfcmrvl_fw {
+	uint32_t magic;
+	uint32_t ref_clock;
+	uint32_t phy;
+	struct nfcmrvl_fw_binary_config bootrom;
+	struct nfcmrvl_fw_binary_config helper;
+	struct nfcmrvl_fw_binary_config firmware;
+	uint8_t reserved[64];
+} __packed;
+
+struct nfcmrvl_fw_dnld {
+	char name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
+	const struct firmware *fw;
+
+	const struct nfcmrvl_fw *header;
+	const struct nfcmrvl_fw_binary_config *binary_config;
+
+	int state;
+	int substate;
+	int offset;
+	int chunk_len;
+
+	struct workqueue_struct	*rx_wq;
+	struct work_struct rx_work;
+	struct sk_buff_head rx_q;
+
+	struct timer_list timer;
+};
+
+int nfcmrvl_fw_dnld_init(struct nfcmrvl_private *priv);
+void nfcmrvl_fw_dnld_deinit(struct nfcmrvl_private *priv);
+void nfcmrvl_fw_dnld_abort(struct nfcmrvl_private *priv);
+int nfcmrvl_fw_dnld_start(struct nci_dev *ndev, const char *firmware_name);
+void nfcmrvl_fw_dnld_recv_frame(struct nfcmrvl_private *priv,
+				struct sk_buff *skb);
+
+#endif
diff --git a/drivers/nfc/nfcmrvl/i2c.c b/drivers/nfc/nfcmrvl/i2c.c
new file mode 100644
index 000000000..0f2237988
--- /dev/null
+++ b/drivers/nfc/nfcmrvl/i2c.c
@@ -0,0 +1,290 @@
+/**
+ * Marvell NFC-over-I2C driver: I2C interface related functions
+ *
+ * Copyright (C) 2015, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+#include <linux/nfc.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+#include "nfcmrvl.h"
+
+struct nfcmrvl_i2c_drv_data {
+	unsigned long flags;
+	struct device *dev;
+	struct i2c_client *i2c;
+	struct nfcmrvl_private *priv;
+};
+
+static int nfcmrvl_i2c_read(struct nfcmrvl_i2c_drv_data *drv_data,
+			    struct sk_buff **skb)
+{
+	int ret;
+	struct nci_ctrl_hdr nci_hdr;
+
+	/* Read NCI header to know the payload size */
+	ret = i2c_master_recv(drv_data->i2c, (u8 *)&nci_hdr, NCI_CTRL_HDR_SIZE);
+	if (ret != NCI_CTRL_HDR_SIZE) {
+		nfc_err(&drv_data->i2c->dev, "cannot read NCI header\n");
+		return -EBADMSG;
+	}
+
+	if (nci_hdr.plen > NCI_MAX_PAYLOAD_SIZE) {
+		nfc_err(&drv_data->i2c->dev, "invalid packet payload size\n");
+		return -EBADMSG;
+	}
+
+	*skb = nci_skb_alloc(drv_data->priv->ndev,
+			     nci_hdr.plen + NCI_CTRL_HDR_SIZE, GFP_KERNEL);
+	if (!*skb)
+		return -ENOMEM;
+
+	/* Copy NCI header into the SKB */
+	skb_put_data(*skb, &nci_hdr, NCI_CTRL_HDR_SIZE);
+
+	if (nci_hdr.plen) {
+		/* Read the NCI payload */
+		ret = i2c_master_recv(drv_data->i2c,
+				      skb_put(*skb, nci_hdr.plen),
+				      nci_hdr.plen);
+
+		if (ret != nci_hdr.plen) {
+			nfc_err(&drv_data->i2c->dev,
+				"Invalid frame payload length: %u (expected %u)\n",
+				ret, nci_hdr.plen);
+			kfree_skb(*skb);
+			return -EBADMSG;
+		}
+	}
+
+	return 0;
+}
+
+static irqreturn_t nfcmrvl_i2c_int_irq_thread_fn(int irq, void *drv_data_ptr)
+{
+	struct nfcmrvl_i2c_drv_data *drv_data = drv_data_ptr;
+	struct sk_buff *skb = NULL;
+	int ret;
+
+	if (!drv_data->priv)
+		return IRQ_HANDLED;
+
+	if (test_bit(NFCMRVL_PHY_ERROR, &drv_data->priv->flags))
+		return IRQ_HANDLED;
+
+	ret = nfcmrvl_i2c_read(drv_data, &skb);
+
+	switch (ret) {
+	case -EREMOTEIO:
+		set_bit(NFCMRVL_PHY_ERROR, &drv_data->priv->flags);
+		break;
+	case -ENOMEM:
+	case -EBADMSG:
+		nfc_err(&drv_data->i2c->dev, "read failed %d\n", ret);
+		break;
+	default:
+		if (nfcmrvl_nci_recv_frame(drv_data->priv, skb) < 0)
+			nfc_err(&drv_data->i2c->dev, "corrupted RX packet\n");
+		break;
+	}
+	return IRQ_HANDLED;
+}
+
+static int nfcmrvl_i2c_nci_open(struct nfcmrvl_private *priv)
+{
+	struct nfcmrvl_i2c_drv_data *drv_data = priv->drv_data;
+
+	if (!drv_data)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int nfcmrvl_i2c_nci_close(struct nfcmrvl_private *priv)
+{
+	return 0;
+}
+
+static int nfcmrvl_i2c_nci_send(struct nfcmrvl_private *priv,
+				struct sk_buff *skb)
+{
+	struct nfcmrvl_i2c_drv_data *drv_data = priv->drv_data;
+	int ret;
+
+	if (test_bit(NFCMRVL_PHY_ERROR, &priv->flags))
+		return -EREMOTEIO;
+
+	ret = i2c_master_send(drv_data->i2c, skb->data, skb->len);
+
+	/* Retry if chip was in standby */
+	if (ret == -EREMOTEIO) {
+		nfc_info(drv_data->dev, "chip may sleep, retry\n");
+		usleep_range(6000, 10000);
+		ret = i2c_master_send(drv_data->i2c, skb->data, skb->len);
+	}
+
+	if (ret >= 0) {
+		if (ret != skb->len) {
+			nfc_err(drv_data->dev,
+				"Invalid length sent: %u (expected %u)\n",
+				ret, skb->len);
+			ret = -EREMOTEIO;
+		} else
+			ret = 0;
+		kfree_skb(skb);
+	}
+
+	return ret;
+}
+
+static void nfcmrvl_i2c_nci_update_config(struct nfcmrvl_private *priv,
+					  const void *param)
+{
+}
+
+static struct nfcmrvl_if_ops i2c_ops = {
+	.nci_open = nfcmrvl_i2c_nci_open,
+	.nci_close = nfcmrvl_i2c_nci_close,
+	.nci_send = nfcmrvl_i2c_nci_send,
+	.nci_update_config = nfcmrvl_i2c_nci_update_config,
+};
+
+static int nfcmrvl_i2c_parse_dt(struct device_node *node,
+				struct nfcmrvl_platform_data *pdata)
+{
+	int ret;
+
+	ret = nfcmrvl_parse_dt(node, pdata);
+	if (ret < 0) {
+		pr_err("Failed to get generic entries\n");
+		return ret;
+	}
+
+	if (of_find_property(node, "i2c-int-falling", NULL))
+		pdata->irq_polarity = IRQF_TRIGGER_FALLING;
+	else
+		pdata->irq_polarity = IRQF_TRIGGER_RISING;
+
+	ret = irq_of_parse_and_map(node, 0);
+	if (ret < 0) {
+		pr_err("Unable to get irq, error: %d\n", ret);
+		return ret;
+	}
+	pdata->irq = ret;
+
+	return 0;
+}
+
+static int nfcmrvl_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct nfcmrvl_i2c_drv_data *drv_data;
+	struct nfcmrvl_platform_data *pdata;
+	struct nfcmrvl_platform_data config;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
+		return -ENODEV;
+	}
+
+	drv_data = devm_kzalloc(&client->dev, sizeof(*drv_data), GFP_KERNEL);
+	if (!drv_data)
+		return -ENOMEM;
+
+	drv_data->i2c = client;
+	drv_data->dev = &client->dev;
+	drv_data->priv = NULL;
+
+	i2c_set_clientdata(client, drv_data);
+
+	pdata = client->dev.platform_data;
+
+	if (!pdata && client->dev.of_node)
+		if (nfcmrvl_i2c_parse_dt(client->dev.of_node, &config) == 0)
+			pdata = &config;
+
+	if (!pdata)
+		return -EINVAL;
+
+	/* Request the read IRQ */
+	ret = devm_request_threaded_irq(&drv_data->i2c->dev, pdata->irq,
+					NULL, nfcmrvl_i2c_int_irq_thread_fn,
+					pdata->irq_polarity | IRQF_ONESHOT,
+					"nfcmrvl_i2c_int", drv_data);
+	if (ret < 0) {
+		nfc_err(&drv_data->i2c->dev,
+			"Unable to register IRQ handler\n");
+		return ret;
+	}
+
+	drv_data->priv = nfcmrvl_nci_register_dev(NFCMRVL_PHY_I2C,
+						  drv_data, &i2c_ops,
+						  &drv_data->i2c->dev, pdata);
+
+	if (IS_ERR(drv_data->priv))
+		return PTR_ERR(drv_data->priv);
+
+	drv_data->priv->support_fw_dnld = true;
+
+	return 0;
+}
+
+static int nfcmrvl_i2c_remove(struct i2c_client *client)
+{
+	struct nfcmrvl_i2c_drv_data *drv_data = i2c_get_clientdata(client);
+
+	nfcmrvl_nci_unregister_dev(drv_data->priv);
+
+	return 0;
+}
+
+
+static const struct of_device_id of_nfcmrvl_i2c_match[] = {
+	{ .compatible = "marvell,nfc-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_nfcmrvl_i2c_match);
+
+static const struct i2c_device_id nfcmrvl_i2c_id_table[] = {
+	{ "nfcmrvl_i2c", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, nfcmrvl_i2c_id_table);
+
+static struct i2c_driver nfcmrvl_i2c_driver = {
+	.probe = nfcmrvl_i2c_probe,
+	.id_table = nfcmrvl_i2c_id_table,
+	.remove = nfcmrvl_i2c_remove,
+	.driver = {
+		.name		= "nfcmrvl_i2c",
+		.owner		= THIS_MODULE,
+		.of_match_table	= of_match_ptr(of_nfcmrvl_i2c_match),
+	},
+};
+
+module_i2c_driver(nfcmrvl_i2c_driver);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell NFC-over-I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c
new file mode 100644
index 000000000..54d228acc
--- /dev/null
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -0,0 +1,287 @@
+/*
+ * Marvell NFC driver: major functions
+ *
+ * Copyright (C) 2014-2015 Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/of_gpio.h>
+#include <linux/nfc.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+#include "nfcmrvl.h"
+
+static int nfcmrvl_nci_open(struct nci_dev *ndev)
+{
+	struct nfcmrvl_private *priv = nci_get_drvdata(ndev);
+	int err;
+
+	if (test_and_set_bit(NFCMRVL_NCI_RUNNING, &priv->flags))
+		return 0;
+
+	/* Reset possible fault of previous session */
+	clear_bit(NFCMRVL_PHY_ERROR, &priv->flags);
+
+	err = priv->if_ops->nci_open(priv);
+
+	if (err)
+		clear_bit(NFCMRVL_NCI_RUNNING, &priv->flags);
+
+	return err;
+}
+
+static int nfcmrvl_nci_close(struct nci_dev *ndev)
+{
+	struct nfcmrvl_private *priv = nci_get_drvdata(ndev);
+
+	if (!test_and_clear_bit(NFCMRVL_NCI_RUNNING, &priv->flags))
+		return 0;
+
+	priv->if_ops->nci_close(priv);
+
+	return 0;
+}
+
+static int nfcmrvl_nci_send(struct nci_dev *ndev, struct sk_buff *skb)
+{
+	struct nfcmrvl_private *priv = nci_get_drvdata(ndev);
+
+	nfc_info(priv->dev, "send entry, len %d\n", skb->len);
+
+	skb->dev = (void *)ndev;
+
+	if (priv->config.hci_muxed) {
+		unsigned char *hdr;
+		unsigned char len = skb->len;
+
+		hdr = skb_push(skb, NFCMRVL_HCI_EVENT_HEADER_SIZE);
+		hdr[0] = NFCMRVL_HCI_COMMAND_CODE;
+		hdr[1] = NFCMRVL_HCI_OGF;
+		hdr[2] = NFCMRVL_HCI_OCF;
+		hdr[3] = len;
+	}
+
+	return priv->if_ops->nci_send(priv, skb);
+}
+
+static int nfcmrvl_nci_setup(struct nci_dev *ndev)
+{
+	__u8 val = 1;
+
+	nci_set_config(ndev, NFCMRVL_PB_BAIL_OUT, 1, &val);
+	return 0;
+}
+
+static int nfcmrvl_nci_fw_download(struct nci_dev *ndev,
+				   const char *firmware_name)
+{
+	return nfcmrvl_fw_dnld_start(ndev, firmware_name);
+}
+
+static struct nci_ops nfcmrvl_nci_ops = {
+	.open = nfcmrvl_nci_open,
+	.close = nfcmrvl_nci_close,
+	.send = nfcmrvl_nci_send,
+	.setup = nfcmrvl_nci_setup,
+	.fw_download = nfcmrvl_nci_fw_download,
+};
+
+struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy,
+				void *drv_data,
+				struct nfcmrvl_if_ops *ops,
+				struct device *dev,
+				struct nfcmrvl_platform_data *pdata)
+{
+	struct nfcmrvl_private *priv;
+	int rc;
+	int headroom;
+	int tailroom;
+	u32 protocols;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return ERR_PTR(-ENOMEM);
+
+	priv->drv_data = drv_data;
+	priv->if_ops = ops;
+	priv->dev = dev;
+	priv->phy = phy;
+
+	memcpy(&priv->config, pdata, sizeof(*pdata));
+
+	if (gpio_is_valid(priv->config.reset_n_io)) {
+		rc = gpio_request_one(priv->config.reset_n_io,
+				      GPIOF_OUT_INIT_LOW,
+				      "nfcmrvl_reset_n");
+		if (rc < 0) {
+			priv->config.reset_n_io = -EINVAL;
+			nfc_err(dev, "failed to request reset_n io\n");
+		}
+	}
+
+	if (phy == NFCMRVL_PHY_SPI) {
+		headroom = NCI_SPI_HDR_LEN;
+		tailroom = 1;
+	} else
+		headroom = tailroom = 0;
+
+	if (priv->config.hci_muxed)
+		headroom += NFCMRVL_HCI_EVENT_HEADER_SIZE;
+
+	protocols = NFC_PROTO_JEWEL_MASK
+		| NFC_PROTO_MIFARE_MASK
+		| NFC_PROTO_FELICA_MASK
+		| NFC_PROTO_ISO14443_MASK
+		| NFC_PROTO_ISO14443_B_MASK
+		| NFC_PROTO_ISO15693_MASK
+		| NFC_PROTO_NFC_DEP_MASK;
+
+	priv->ndev = nci_allocate_device(&nfcmrvl_nci_ops, protocols,
+					 headroom, tailroom);
+	if (!priv->ndev) {
+		nfc_err(dev, "nci_allocate_device failed\n");
+		rc = -ENOMEM;
+		goto error_free_gpio;
+	}
+
+	rc = nfcmrvl_fw_dnld_init(priv);
+	if (rc) {
+		nfc_err(dev, "failed to initialize FW download %d\n", rc);
+		goto error_free_dev;
+	}
+
+	nci_set_drvdata(priv->ndev, priv);
+
+	rc = nci_register_device(priv->ndev);
+	if (rc) {
+		nfc_err(dev, "nci_register_device failed %d\n", rc);
+		goto error_fw_dnld_deinit;
+	}
+
+	/* Ensure that controller is powered off */
+	nfcmrvl_chip_halt(priv);
+
+	nfc_info(dev, "registered with nci successfully\n");
+	return priv;
+
+error_fw_dnld_deinit:
+	nfcmrvl_fw_dnld_deinit(priv);
+error_free_dev:
+	nci_free_device(priv->ndev);
+error_free_gpio:
+	if (gpio_is_valid(priv->config.reset_n_io))
+		gpio_free(priv->config.reset_n_io);
+	kfree(priv);
+	return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(nfcmrvl_nci_register_dev);
+
+void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv)
+{
+	struct nci_dev *ndev = priv->ndev;
+
+	nci_unregister_device(ndev);
+	if (priv->ndev->nfc_dev->fw_download_in_progress)
+		nfcmrvl_fw_dnld_abort(priv);
+
+	nfcmrvl_fw_dnld_deinit(priv);
+
+	if (gpio_is_valid(priv->config.reset_n_io))
+		gpio_free(priv->config.reset_n_io);
+
+	nci_free_device(ndev);
+	kfree(priv);
+}
+EXPORT_SYMBOL_GPL(nfcmrvl_nci_unregister_dev);
+
+int nfcmrvl_nci_recv_frame(struct nfcmrvl_private *priv, struct sk_buff *skb)
+{
+	if (priv->config.hci_muxed) {
+		if (skb->data[0] == NFCMRVL_HCI_EVENT_CODE &&
+		    skb->data[1] == NFCMRVL_HCI_NFC_EVENT_CODE) {
+			/* Data packet, let's extract NCI payload */
+			skb_pull(skb, NFCMRVL_HCI_EVENT_HEADER_SIZE);
+		} else {
+			/* Skip this packet */
+			kfree_skb(skb);
+			return 0;
+		}
+	}
+
+	if (priv->ndev->nfc_dev->fw_download_in_progress) {
+		nfcmrvl_fw_dnld_recv_frame(priv, skb);
+		return 0;
+	}
+
+	if (test_bit(NFCMRVL_NCI_RUNNING, &priv->flags))
+		nci_recv_frame(priv->ndev, skb);
+	else {
+		/* Drop this packet since nobody wants it */
+		kfree_skb(skb);
+		return 0;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nfcmrvl_nci_recv_frame);
+
+void nfcmrvl_chip_reset(struct nfcmrvl_private *priv)
+{
+	/* Reset possible fault of previous session */
+	clear_bit(NFCMRVL_PHY_ERROR, &priv->flags);
+
+	if (gpio_is_valid(priv->config.reset_n_io)) {
+		nfc_info(priv->dev, "reset the chip\n");
+		gpio_set_value(priv->config.reset_n_io, 0);
+		usleep_range(5000, 10000);
+		gpio_set_value(priv->config.reset_n_io, 1);
+	} else
+		nfc_info(priv->dev, "no reset available on this interface\n");
+}
+
+void nfcmrvl_chip_halt(struct nfcmrvl_private *priv)
+{
+	if (gpio_is_valid(priv->config.reset_n_io))
+		gpio_set_value(priv->config.reset_n_io, 0);
+}
+
+int nfcmrvl_parse_dt(struct device_node *node,
+		     struct nfcmrvl_platform_data *pdata)
+{
+	int reset_n_io;
+
+	reset_n_io = of_get_named_gpio(node, "reset-n-io", 0);
+	if (reset_n_io < 0) {
+		pr_info("no reset-n-io config\n");
+	} else if (!gpio_is_valid(reset_n_io)) {
+		pr_err("invalid reset-n-io GPIO\n");
+		return reset_n_io;
+	}
+	pdata->reset_n_io = reset_n_io;
+
+	if (of_find_property(node, "hci-muxed", NULL))
+		pdata->hci_muxed = 1;
+	else
+		pdata->hci_muxed = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nfcmrvl_parse_dt);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell NFC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nfc/nfcmrvl/nfcmrvl.h b/drivers/nfc/nfcmrvl/nfcmrvl.h
new file mode 100644
index 000000000..de68ff45e
--- /dev/null
+++ b/drivers/nfc/nfcmrvl/nfcmrvl.h
@@ -0,0 +1,117 @@
+/**
+ * Marvell NFC driver
+ *
+ * Copyright (C) 2014-2015, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#ifndef _NFCMRVL_H_
+#define _NFCMRVL_H_
+
+#include <linux/platform_data/nfcmrvl.h>
+
+#include "fw_dnld.h"
+
+/* Define private flags: */
+#define NFCMRVL_NCI_RUNNING			1
+#define NFCMRVL_PHY_ERROR			2
+
+#define NFCMRVL_EXT_COEX_ID			0xE0
+#define NFCMRVL_NOT_ALLOWED_ID			0xE1
+#define NFCMRVL_ACTIVE_ID			0xE2
+#define NFCMRVL_EXT_COEX_ENABLE			1
+#define NFCMRVL_GPIO_PIN_NFC_NOT_ALLOWED	0xA
+#define NFCMRVL_GPIO_PIN_NFC_ACTIVE		0xB
+#define NFCMRVL_NCI_MAX_EVENT_SIZE		260
+
+/*
+** NCI FW Parmaters
+*/
+
+#define NFCMRVL_PB_BAIL_OUT			0x11
+#define NFCMRVL_PROP_REF_CLOCK			0xF0
+#define NFCMRVL_PROP_SET_HI_CONFIG		0xF1
+
+/*
+** HCI defines
+*/
+
+#define NFCMRVL_HCI_EVENT_HEADER_SIZE		0x04
+#define NFCMRVL_HCI_EVENT_CODE			0x04
+#define NFCMRVL_HCI_NFC_EVENT_CODE		0xFF
+#define NFCMRVL_HCI_COMMAND_CODE		0x01
+#define NFCMRVL_HCI_OGF				0x81
+#define NFCMRVL_HCI_OCF				0xFE
+
+enum nfcmrvl_phy {
+	NFCMRVL_PHY_USB		= 0,
+	NFCMRVL_PHY_UART	= 1,
+	NFCMRVL_PHY_I2C		= 2,
+	NFCMRVL_PHY_SPI		= 3,
+};
+
+struct nfcmrvl_private {
+
+	unsigned long flags;
+
+	/* Platform configuration */
+	struct nfcmrvl_platform_data config;
+
+	/* Parent dev */
+	struct nci_dev *ndev;
+
+	/* FW download context */
+	struct nfcmrvl_fw_dnld fw_dnld;
+
+	/* FW download support */
+	bool support_fw_dnld;
+
+	/*
+	** PHY related information
+	*/
+
+	/* PHY driver context */
+	void *drv_data;
+	/* PHY device */
+	struct device *dev;
+	/* PHY type */
+	enum nfcmrvl_phy phy;
+	/* Low level driver ops */
+	struct nfcmrvl_if_ops *if_ops;
+};
+
+struct nfcmrvl_if_ops {
+	int (*nci_open) (struct nfcmrvl_private *priv);
+	int (*nci_close) (struct nfcmrvl_private *priv);
+	int (*nci_send) (struct nfcmrvl_private *priv, struct sk_buff *skb);
+	void (*nci_update_config)(struct nfcmrvl_private *priv,
+				  const void *param);
+};
+
+void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv);
+int nfcmrvl_nci_recv_frame(struct nfcmrvl_private *priv, struct sk_buff *skb);
+struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy,
+				void *drv_data,
+				struct nfcmrvl_if_ops *ops,
+				struct device *dev,
+				struct nfcmrvl_platform_data *pdata);
+
+
+void nfcmrvl_chip_reset(struct nfcmrvl_private *priv);
+void nfcmrvl_chip_halt(struct nfcmrvl_private *priv);
+
+int nfcmrvl_parse_dt(struct device_node *node,
+		     struct nfcmrvl_platform_data *pdata);
+
+#endif
diff --git a/drivers/nfc/nfcmrvl/spi.c b/drivers/nfc/nfcmrvl/spi.c
new file mode 100644
index 000000000..8e0ddb434
--- /dev/null
+++ b/drivers/nfc/nfcmrvl/spi.c
@@ -0,0 +1,226 @@
+/**
+ * Marvell NFC-over-SPI driver: SPI interface related functions
+ *
+ * Copyright (C) 2015, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/nfc.h>
+#include <linux/gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+#include <linux/spi/spi.h>
+#include "nfcmrvl.h"
+
+#define SPI_WAIT_HANDSHAKE	1
+
+struct nfcmrvl_spi_drv_data {
+	unsigned long flags;
+	struct spi_device *spi;
+	struct nci_spi *nci_spi;
+	struct completion handshake_completion;
+	struct nfcmrvl_private *priv;
+};
+
+static irqreturn_t nfcmrvl_spi_int_irq_thread_fn(int irq, void *drv_data_ptr)
+{
+	struct nfcmrvl_spi_drv_data *drv_data = drv_data_ptr;
+	struct sk_buff *skb;
+
+	/*
+	 * Special case where we are waiting for SPI_INT deassertion to start a
+	 * transfer.
+	 */
+	if (test_and_clear_bit(SPI_WAIT_HANDSHAKE, &drv_data->flags)) {
+		complete(&drv_data->handshake_completion);
+		return IRQ_HANDLED;
+	}
+
+	/* Normal case, SPI_INT deasserted by slave to trigger a master read */
+
+	skb = nci_spi_read(drv_data->nci_spi);
+	if (!skb) {
+		nfc_err(&drv_data->spi->dev, "failed to read spi packet");
+		return IRQ_HANDLED;
+	}
+
+	if (nfcmrvl_nci_recv_frame(drv_data->priv, skb) < 0)
+		nfc_err(&drv_data->spi->dev, "corrupted RX packet");
+
+	return IRQ_HANDLED;
+}
+
+static int nfcmrvl_spi_nci_open(struct nfcmrvl_private *priv)
+{
+	return 0;
+}
+
+static int nfcmrvl_spi_nci_close(struct nfcmrvl_private *priv)
+{
+	return 0;
+}
+
+static int nfcmrvl_spi_nci_send(struct nfcmrvl_private *priv,
+				struct sk_buff *skb)
+{
+	struct nfcmrvl_spi_drv_data *drv_data = priv->drv_data;
+	int err;
+
+	/* Reinit completion for slave handshake */
+	reinit_completion(&drv_data->handshake_completion);
+	set_bit(SPI_WAIT_HANDSHAKE, &drv_data->flags);
+
+	/*
+	 * Append a dummy byte at the end of SPI frame. This is due to a
+	 * specific DMA implementation in the controller
+	 */
+	skb_put(skb, 1);
+
+	/* Send the SPI packet */
+	err = nci_spi_send(drv_data->nci_spi, &drv_data->handshake_completion,
+			   skb);
+	if (err)
+		nfc_err(priv->dev, "spi_send failed %d", err);
+
+	return err;
+}
+
+static void nfcmrvl_spi_nci_update_config(struct nfcmrvl_private *priv,
+					  const void *param)
+{
+	struct nfcmrvl_spi_drv_data *drv_data = priv->drv_data;
+	const struct nfcmrvl_fw_spi_config *config = param;
+
+	drv_data->nci_spi->xfer_speed_hz = config->clk;
+}
+
+static struct nfcmrvl_if_ops spi_ops = {
+	.nci_open = nfcmrvl_spi_nci_open,
+	.nci_close = nfcmrvl_spi_nci_close,
+	.nci_send = nfcmrvl_spi_nci_send,
+	.nci_update_config = nfcmrvl_spi_nci_update_config,
+};
+
+static int nfcmrvl_spi_parse_dt(struct device_node *node,
+				struct nfcmrvl_platform_data *pdata)
+{
+	int ret;
+
+	ret = nfcmrvl_parse_dt(node, pdata);
+	if (ret < 0) {
+		pr_err("Failed to get generic entries\n");
+		return ret;
+	}
+
+	ret = irq_of_parse_and_map(node, 0);
+	if (ret < 0) {
+		pr_err("Unable to get irq, error: %d\n", ret);
+		return ret;
+	}
+	pdata->irq = ret;
+
+	return 0;
+}
+
+static int nfcmrvl_spi_probe(struct spi_device *spi)
+{
+	struct nfcmrvl_platform_data *pdata;
+	struct nfcmrvl_platform_data config;
+	struct nfcmrvl_spi_drv_data *drv_data;
+	int ret = 0;
+
+	drv_data = devm_kzalloc(&spi->dev, sizeof(*drv_data), GFP_KERNEL);
+	if (!drv_data)
+		return -ENOMEM;
+
+	drv_data->spi = spi;
+	drv_data->priv = NULL;
+	spi_set_drvdata(spi, drv_data);
+
+	pdata = spi->dev.platform_data;
+
+	if (!pdata && spi->dev.of_node)
+		if (nfcmrvl_spi_parse_dt(spi->dev.of_node, &config) == 0)
+			pdata = &config;
+
+	if (!pdata)
+		return -EINVAL;
+
+	ret = devm_request_threaded_irq(&drv_data->spi->dev, pdata->irq,
+					NULL, nfcmrvl_spi_int_irq_thread_fn,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					"nfcmrvl_spi_int", drv_data);
+	if (ret < 0) {
+		nfc_err(&drv_data->spi->dev, "Unable to register IRQ handler");
+		return -ENODEV;
+	}
+
+	drv_data->priv = nfcmrvl_nci_register_dev(NFCMRVL_PHY_SPI,
+						  drv_data, &spi_ops,
+						  &drv_data->spi->dev,
+						  pdata);
+	if (IS_ERR(drv_data->priv))
+		return PTR_ERR(drv_data->priv);
+
+	drv_data->priv->support_fw_dnld = true;
+
+	drv_data->nci_spi = nci_spi_allocate_spi(drv_data->spi, 0, 10,
+						 drv_data->priv->ndev);
+
+	/* Init completion for slave handshake */
+	init_completion(&drv_data->handshake_completion);
+	return 0;
+}
+
+static int nfcmrvl_spi_remove(struct spi_device *spi)
+{
+	struct nfcmrvl_spi_drv_data *drv_data = spi_get_drvdata(spi);
+
+	nfcmrvl_nci_unregister_dev(drv_data->priv);
+	return 0;
+}
+
+static const struct of_device_id of_nfcmrvl_spi_match[] = {
+	{ .compatible = "marvell,nfc-spi", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_nfcmrvl_spi_match);
+
+static const struct spi_device_id nfcmrvl_spi_id_table[] = {
+	{ "nfcmrvl_spi", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, nfcmrvl_spi_id_table);
+
+static struct spi_driver nfcmrvl_spi_driver = {
+	.probe		= nfcmrvl_spi_probe,
+	.remove		= nfcmrvl_spi_remove,
+	.id_table	= nfcmrvl_spi_id_table,
+	.driver		= {
+		.name		= "nfcmrvl_spi",
+		.owner		= THIS_MODULE,
+		.of_match_table	= of_match_ptr(of_nfcmrvl_spi_match),
+	},
+};
+
+module_spi_driver(nfcmrvl_spi_driver);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell NFC-over-SPI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nfc/nfcmrvl/uart.c b/drivers/nfc/nfcmrvl/uart.c
new file mode 100644
index 000000000..e5a622ce4
--- /dev/null
+++ b/drivers/nfc/nfcmrvl/uart.c
@@ -0,0 +1,235 @@
+/**
+ * Marvell NFC-over-UART driver
+ *
+ * Copyright (C) 2015, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/of_gpio.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+#include "nfcmrvl.h"
+
+static unsigned int hci_muxed;
+static unsigned int flow_control;
+static unsigned int break_control;
+static int reset_n_io = -EINVAL;
+
+/*
+** NFCMRVL NCI OPS
+*/
+
+static int nfcmrvl_uart_nci_open(struct nfcmrvl_private *priv)
+{
+	return 0;
+}
+
+static int nfcmrvl_uart_nci_close(struct nfcmrvl_private *priv)
+{
+	return 0;
+}
+
+static int nfcmrvl_uart_nci_send(struct nfcmrvl_private *priv,
+				 struct sk_buff *skb)
+{
+	struct nci_uart *nu = priv->drv_data;
+
+	return nu->ops.send(nu, skb);
+}
+
+static void nfcmrvl_uart_nci_update_config(struct nfcmrvl_private *priv,
+					   const void *param)
+{
+	struct nci_uart *nu = priv->drv_data;
+	const struct nfcmrvl_fw_uart_config *config = param;
+
+	nci_uart_set_config(nu, le32_to_cpu(config->baudrate),
+			    config->flow_control);
+}
+
+static struct nfcmrvl_if_ops uart_ops = {
+	.nci_open = nfcmrvl_uart_nci_open,
+	.nci_close = nfcmrvl_uart_nci_close,
+	.nci_send = nfcmrvl_uart_nci_send,
+	.nci_update_config = nfcmrvl_uart_nci_update_config
+};
+
+static int nfcmrvl_uart_parse_dt(struct device_node *node,
+				 struct nfcmrvl_platform_data *pdata)
+{
+	struct device_node *matched_node;
+	int ret;
+
+	matched_node = of_get_compatible_child(node, "marvell,nfc-uart");
+	if (!matched_node) {
+		matched_node = of_get_compatible_child(node, "mrvl,nfc-uart");
+		if (!matched_node)
+			return -ENODEV;
+	}
+
+	ret = nfcmrvl_parse_dt(matched_node, pdata);
+	if (ret < 0) {
+		pr_err("Failed to get generic entries\n");
+		of_node_put(matched_node);
+		return ret;
+	}
+
+	if (of_find_property(matched_node, "flow-control", NULL))
+		pdata->flow_control = 1;
+	else
+		pdata->flow_control = 0;
+
+	if (of_find_property(matched_node, "break-control", NULL))
+		pdata->break_control = 1;
+	else
+		pdata->break_control = 0;
+
+	of_node_put(matched_node);
+
+	return 0;
+}
+
+/*
+** NCI UART OPS
+*/
+
+static int nfcmrvl_nci_uart_open(struct nci_uart *nu)
+{
+	struct nfcmrvl_private *priv;
+	struct nfcmrvl_platform_data *pdata = NULL;
+	struct nfcmrvl_platform_data config;
+	struct device *dev = nu->tty->dev;
+
+	/*
+	 * Platform data cannot be used here since usually it is already used
+	 * by low level serial driver. We can try to retrieve serial device
+	 * and check if DT entries were added.
+	 */
+
+	if (dev && dev->parent && dev->parent->of_node)
+		if (nfcmrvl_uart_parse_dt(dev->parent->of_node, &config) == 0)
+			pdata = &config;
+
+	if (!pdata) {
+		pr_info("No platform data / DT -> fallback to module params\n");
+		config.hci_muxed = hci_muxed;
+		config.reset_n_io = reset_n_io;
+		config.flow_control = flow_control;
+		config.break_control = break_control;
+		pdata = &config;
+	}
+
+	priv = nfcmrvl_nci_register_dev(NFCMRVL_PHY_UART, nu, &uart_ops,
+					dev, pdata);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
+
+	priv->support_fw_dnld = true;
+
+	nu->drv_data = priv;
+	nu->ndev = priv->ndev;
+
+	return 0;
+}
+
+static void nfcmrvl_nci_uart_close(struct nci_uart *nu)
+{
+	nfcmrvl_nci_unregister_dev((struct nfcmrvl_private *)nu->drv_data);
+}
+
+static int nfcmrvl_nci_uart_recv(struct nci_uart *nu, struct sk_buff *skb)
+{
+	return nfcmrvl_nci_recv_frame((struct nfcmrvl_private *)nu->drv_data,
+				      skb);
+}
+
+static void nfcmrvl_nci_uart_tx_start(struct nci_uart *nu)
+{
+	struct nfcmrvl_private *priv = (struct nfcmrvl_private *)nu->drv_data;
+
+	if (priv->ndev->nfc_dev->fw_download_in_progress)
+		return;
+
+	/* Remove BREAK to wake up the NFCC */
+	if (priv->config.break_control && nu->tty->ops->break_ctl) {
+		nu->tty->ops->break_ctl(nu->tty, 0);
+		usleep_range(3000, 5000);
+	}
+}
+
+static void nfcmrvl_nci_uart_tx_done(struct nci_uart *nu)
+{
+	struct nfcmrvl_private *priv = (struct nfcmrvl_private *)nu->drv_data;
+
+	if (priv->ndev->nfc_dev->fw_download_in_progress)
+		return;
+
+	/*
+	** To ensure that if the NFCC goes in DEEP SLEEP sate we can wake him
+	** up. we set BREAK. Once we will be ready to send again we will remove
+	** it.
+	*/
+	if (priv->config.break_control && nu->tty->ops->break_ctl) {
+		nu->tty->ops->break_ctl(nu->tty, -1);
+		usleep_range(1000, 3000);
+	}
+}
+
+static struct nci_uart nfcmrvl_nci_uart = {
+	.owner  = THIS_MODULE,
+	.name   = "nfcmrvl_uart",
+	.driver = NCI_UART_DRIVER_MARVELL,
+	.ops	= {
+		.open		= nfcmrvl_nci_uart_open,
+		.close		= nfcmrvl_nci_uart_close,
+		.recv		= nfcmrvl_nci_uart_recv,
+		.tx_start	= nfcmrvl_nci_uart_tx_start,
+		.tx_done	= nfcmrvl_nci_uart_tx_done,
+	}
+};
+
+/*
+** Module init
+*/
+
+static int nfcmrvl_uart_init_module(void)
+{
+	return nci_uart_register(&nfcmrvl_nci_uart);
+}
+
+static void nfcmrvl_uart_exit_module(void)
+{
+	nci_uart_unregister(&nfcmrvl_nci_uart);
+}
+
+module_init(nfcmrvl_uart_init_module);
+module_exit(nfcmrvl_uart_exit_module);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell NFC-over-UART");
+MODULE_LICENSE("GPL v2");
+
+module_param(flow_control, uint, 0);
+MODULE_PARM_DESC(flow_control, "Tell if UART needs flow control at init.");
+
+module_param(break_control, uint, 0);
+MODULE_PARM_DESC(break_control, "Tell if UART driver must drive break signal.");
+
+module_param(hci_muxed, uint, 0);
+MODULE_PARM_DESC(hci_muxed, "Tell if transport is muxed in HCI one.");
+
+module_param(reset_n_io, int, 0);
+MODULE_PARM_DESC(reset_n_io, "GPIO that is wired to RESET_N signal.");
diff --git a/drivers/nfc/nfcmrvl/usb.c b/drivers/nfc/nfcmrvl/usb.c
new file mode 100644
index 000000000..f26986eb5
--- /dev/null
+++ b/drivers/nfc/nfcmrvl/usb.c
@@ -0,0 +1,484 @@
+/**
+ * Marvell NFC-over-USB driver: USB interface related functions
+ *
+ * Copyright (C) 2014, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/nfc.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+#include "nfcmrvl.h"
+
+static struct usb_device_id nfcmrvl_table[] = {
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1286, 0x2046,
+					USB_CLASS_VENDOR_SPEC, 4, 1) },
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, nfcmrvl_table);
+
+#define NFCMRVL_USB_BULK_RUNNING	1
+#define NFCMRVL_USB_SUSPENDING		2
+
+struct nfcmrvl_usb_drv_data {
+	struct usb_device *udev;
+	struct usb_interface *intf;
+	unsigned long flags;
+	struct work_struct waker;
+	struct usb_anchor tx_anchor;
+	struct usb_anchor bulk_anchor;
+	struct usb_anchor deferred;
+	int tx_in_flight;
+	/* protects tx_in_flight */
+	spinlock_t txlock;
+	struct usb_endpoint_descriptor *bulk_tx_ep;
+	struct usb_endpoint_descriptor *bulk_rx_ep;
+	int suspend_count;
+	struct nfcmrvl_private *priv;
+};
+
+static int nfcmrvl_inc_tx(struct nfcmrvl_usb_drv_data *drv_data)
+{
+	unsigned long flags;
+	int rv;
+
+	spin_lock_irqsave(&drv_data->txlock, flags);
+	rv = test_bit(NFCMRVL_USB_SUSPENDING, &drv_data->flags);
+	if (!rv)
+		drv_data->tx_in_flight++;
+	spin_unlock_irqrestore(&drv_data->txlock, flags);
+
+	return rv;
+}
+
+static void nfcmrvl_bulk_complete(struct urb *urb)
+{
+	struct nfcmrvl_usb_drv_data *drv_data = urb->context;
+	struct sk_buff *skb;
+	int err;
+
+	dev_dbg(&drv_data->udev->dev, "urb %p status %d count %d\n",
+		urb, urb->status, urb->actual_length);
+
+	if (!test_bit(NFCMRVL_NCI_RUNNING, &drv_data->flags))
+		return;
+
+	if (!urb->status) {
+		skb = nci_skb_alloc(drv_data->priv->ndev, urb->actual_length,
+				    GFP_ATOMIC);
+		if (!skb) {
+			nfc_err(&drv_data->udev->dev, "failed to alloc mem\n");
+		} else {
+			skb_put_data(skb, urb->transfer_buffer,
+				     urb->actual_length);
+			if (nfcmrvl_nci_recv_frame(drv_data->priv, skb) < 0)
+				nfc_err(&drv_data->udev->dev,
+					"corrupted Rx packet\n");
+		}
+	}
+
+	if (!test_bit(NFCMRVL_USB_BULK_RUNNING, &drv_data->flags))
+		return;
+
+	usb_anchor_urb(urb, &drv_data->bulk_anchor);
+	usb_mark_last_busy(drv_data->udev);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err) {
+		/* -EPERM: urb is being killed;
+		 * -ENODEV: device got disconnected
+		 */
+		if (err != -EPERM && err != -ENODEV)
+			nfc_err(&drv_data->udev->dev,
+				"urb %p failed to resubmit (%d)\n", urb, -err);
+		usb_unanchor_urb(urb);
+	}
+}
+
+static int
+nfcmrvl_submit_bulk_urb(struct nfcmrvl_usb_drv_data *drv_data, gfp_t mem_flags)
+{
+	struct urb *urb;
+	unsigned char *buf;
+	unsigned int pipe;
+	int err, size = NFCMRVL_NCI_MAX_EVENT_SIZE;
+
+	if (!drv_data->bulk_rx_ep)
+		return -ENODEV;
+
+	urb = usb_alloc_urb(0, mem_flags);
+	if (!urb)
+		return -ENOMEM;
+
+	buf = kmalloc(size, mem_flags);
+	if (!buf) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvbulkpipe(drv_data->udev,
+			       drv_data->bulk_rx_ep->bEndpointAddress);
+
+	usb_fill_bulk_urb(urb, drv_data->udev, pipe, buf, size,
+			  nfcmrvl_bulk_complete, drv_data);
+
+	urb->transfer_flags |= URB_FREE_BUFFER;
+
+	usb_mark_last_busy(drv_data->udev);
+	usb_anchor_urb(urb, &drv_data->bulk_anchor);
+
+	err = usb_submit_urb(urb, mem_flags);
+	if (err) {
+		if (err != -EPERM && err != -ENODEV)
+			nfc_err(&drv_data->udev->dev,
+				"urb %p submission failed (%d)\n", urb, -err);
+		usb_unanchor_urb(urb);
+	}
+
+	usb_free_urb(urb);
+
+	return err;
+}
+
+static void nfcmrvl_tx_complete(struct urb *urb)
+{
+	struct sk_buff *skb = urb->context;
+	struct nci_dev *ndev = (struct nci_dev *)skb->dev;
+	struct nfcmrvl_private *priv = nci_get_drvdata(ndev);
+	struct nfcmrvl_usb_drv_data *drv_data = priv->drv_data;
+	unsigned long flags;
+
+	nfc_info(priv->dev, "urb %p status %d count %d\n",
+		 urb, urb->status, urb->actual_length);
+
+	spin_lock_irqsave(&drv_data->txlock, flags);
+	drv_data->tx_in_flight--;
+	spin_unlock_irqrestore(&drv_data->txlock, flags);
+
+	kfree(urb->setup_packet);
+	kfree_skb(skb);
+}
+
+static int nfcmrvl_usb_nci_open(struct nfcmrvl_private *priv)
+{
+	struct nfcmrvl_usb_drv_data *drv_data = priv->drv_data;
+	int err;
+
+	err = usb_autopm_get_interface(drv_data->intf);
+	if (err)
+		return err;
+
+	drv_data->intf->needs_remote_wakeup = 1;
+
+	err = nfcmrvl_submit_bulk_urb(drv_data, GFP_KERNEL);
+	if (err)
+		goto failed;
+
+	set_bit(NFCMRVL_USB_BULK_RUNNING, &drv_data->flags);
+	nfcmrvl_submit_bulk_urb(drv_data, GFP_KERNEL);
+
+	usb_autopm_put_interface(drv_data->intf);
+	return 0;
+
+failed:
+	usb_autopm_put_interface(drv_data->intf);
+	return err;
+}
+
+static void nfcmrvl_usb_stop_traffic(struct nfcmrvl_usb_drv_data *drv_data)
+{
+	usb_kill_anchored_urbs(&drv_data->bulk_anchor);
+}
+
+static int nfcmrvl_usb_nci_close(struct nfcmrvl_private *priv)
+{
+	struct nfcmrvl_usb_drv_data *drv_data = priv->drv_data;
+	int err;
+
+	cancel_work_sync(&drv_data->waker);
+
+	clear_bit(NFCMRVL_USB_BULK_RUNNING, &drv_data->flags);
+
+	nfcmrvl_usb_stop_traffic(drv_data);
+	usb_kill_anchored_urbs(&drv_data->tx_anchor);
+	err = usb_autopm_get_interface(drv_data->intf);
+	if (err)
+		goto failed;
+
+	drv_data->intf->needs_remote_wakeup = 0;
+	usb_autopm_put_interface(drv_data->intf);
+
+failed:
+	usb_scuttle_anchored_urbs(&drv_data->deferred);
+	return 0;
+}
+
+static int nfcmrvl_usb_nci_send(struct nfcmrvl_private *priv,
+				struct sk_buff *skb)
+{
+	struct nfcmrvl_usb_drv_data *drv_data = priv->drv_data;
+	struct urb *urb;
+	unsigned int pipe;
+	int err;
+
+	if (!drv_data->bulk_tx_ep)
+		return -ENODEV;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb)
+		return -ENOMEM;
+
+	pipe = usb_sndbulkpipe(drv_data->udev,
+				drv_data->bulk_tx_ep->bEndpointAddress);
+
+	usb_fill_bulk_urb(urb, drv_data->udev, pipe, skb->data, skb->len,
+			  nfcmrvl_tx_complete, skb);
+
+	err = nfcmrvl_inc_tx(drv_data);
+	if (err) {
+		usb_anchor_urb(urb, &drv_data->deferred);
+		schedule_work(&drv_data->waker);
+		err = 0;
+		goto done;
+	}
+
+	usb_anchor_urb(urb, &drv_data->tx_anchor);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err) {
+		if (err != -EPERM && err != -ENODEV)
+			nfc_err(&drv_data->udev->dev,
+				"urb %p submission failed (%d)\n", urb, -err);
+		kfree(urb->setup_packet);
+		usb_unanchor_urb(urb);
+	} else {
+		usb_mark_last_busy(drv_data->udev);
+	}
+
+done:
+	usb_free_urb(urb);
+	return err;
+}
+
+static struct nfcmrvl_if_ops usb_ops = {
+	.nci_open = nfcmrvl_usb_nci_open,
+	.nci_close = nfcmrvl_usb_nci_close,
+	.nci_send = nfcmrvl_usb_nci_send,
+};
+
+static void nfcmrvl_waker(struct work_struct *work)
+{
+	struct nfcmrvl_usb_drv_data *drv_data =
+			container_of(work, struct nfcmrvl_usb_drv_data, waker);
+	int err;
+
+	err = usb_autopm_get_interface(drv_data->intf);
+	if (err)
+		return;
+
+	usb_autopm_put_interface(drv_data->intf);
+}
+
+static int nfcmrvl_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_endpoint_descriptor *ep_desc;
+	struct nfcmrvl_usb_drv_data *drv_data;
+	struct nfcmrvl_private *priv;
+	int i;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct nfcmrvl_platform_data config;
+
+	/* No configuration for USB */
+	memset(&config, 0, sizeof(config));
+	config.reset_n_io = -EINVAL;
+
+	nfc_info(&udev->dev, "intf %p id %p\n", intf, id);
+
+	drv_data = devm_kzalloc(&intf->dev, sizeof(*drv_data), GFP_KERNEL);
+	if (!drv_data)
+		return -ENOMEM;
+
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		ep_desc = &intf->cur_altsetting->endpoint[i].desc;
+
+		if (!drv_data->bulk_tx_ep &&
+		    usb_endpoint_is_bulk_out(ep_desc)) {
+			drv_data->bulk_tx_ep = ep_desc;
+			continue;
+		}
+
+		if (!drv_data->bulk_rx_ep &&
+		    usb_endpoint_is_bulk_in(ep_desc)) {
+			drv_data->bulk_rx_ep = ep_desc;
+			continue;
+		}
+	}
+
+	if (!drv_data->bulk_tx_ep || !drv_data->bulk_rx_ep)
+		return -ENODEV;
+
+	drv_data->udev = udev;
+	drv_data->intf = intf;
+
+	INIT_WORK(&drv_data->waker, nfcmrvl_waker);
+	spin_lock_init(&drv_data->txlock);
+
+	init_usb_anchor(&drv_data->tx_anchor);
+	init_usb_anchor(&drv_data->bulk_anchor);
+	init_usb_anchor(&drv_data->deferred);
+
+	priv = nfcmrvl_nci_register_dev(NFCMRVL_PHY_USB, drv_data, &usb_ops,
+					&intf->dev, &config);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
+
+	drv_data->priv = priv;
+	drv_data->priv->support_fw_dnld = false;
+
+	usb_set_intfdata(intf, drv_data);
+
+	return 0;
+}
+
+static void nfcmrvl_disconnect(struct usb_interface *intf)
+{
+	struct nfcmrvl_usb_drv_data *drv_data = usb_get_intfdata(intf);
+
+	if (!drv_data)
+		return;
+
+	nfc_info(&drv_data->udev->dev, "intf %p\n", intf);
+
+	nfcmrvl_nci_unregister_dev(drv_data->priv);
+
+	usb_set_intfdata(drv_data->intf, NULL);
+}
+
+#ifdef CONFIG_PM
+static int nfcmrvl_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct nfcmrvl_usb_drv_data *drv_data = usb_get_intfdata(intf);
+
+	nfc_info(&drv_data->udev->dev, "intf %p\n", intf);
+
+	if (drv_data->suspend_count++)
+		return 0;
+
+	spin_lock_irq(&drv_data->txlock);
+	if (!(PMSG_IS_AUTO(message) && drv_data->tx_in_flight)) {
+		set_bit(NFCMRVL_USB_SUSPENDING, &drv_data->flags);
+		spin_unlock_irq(&drv_data->txlock);
+	} else {
+		spin_unlock_irq(&drv_data->txlock);
+		drv_data->suspend_count--;
+		return -EBUSY;
+	}
+
+	nfcmrvl_usb_stop_traffic(drv_data);
+	usb_kill_anchored_urbs(&drv_data->tx_anchor);
+
+	return 0;
+}
+
+static void nfcmrvl_play_deferred(struct nfcmrvl_usb_drv_data *drv_data)
+{
+	struct urb *urb;
+	int err;
+
+	while ((urb = usb_get_from_anchor(&drv_data->deferred))) {
+		usb_anchor_urb(urb, &drv_data->tx_anchor);
+
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err) {
+			kfree(urb->setup_packet);
+			usb_unanchor_urb(urb);
+			usb_free_urb(urb);
+			break;
+		}
+
+		drv_data->tx_in_flight++;
+		usb_free_urb(urb);
+	}
+
+	/* Cleanup the rest deferred urbs. */
+	while ((urb = usb_get_from_anchor(&drv_data->deferred))) {
+		kfree(urb->setup_packet);
+		usb_free_urb(urb);
+	}
+}
+
+static int nfcmrvl_resume(struct usb_interface *intf)
+{
+	struct nfcmrvl_usb_drv_data *drv_data = usb_get_intfdata(intf);
+	int err = 0;
+
+	nfc_info(&drv_data->udev->dev, "intf %p\n", intf);
+
+	if (--drv_data->suspend_count)
+		return 0;
+
+	if (!test_bit(NFCMRVL_NCI_RUNNING, &drv_data->flags))
+		goto done;
+
+	if (test_bit(NFCMRVL_USB_BULK_RUNNING, &drv_data->flags)) {
+		err = nfcmrvl_submit_bulk_urb(drv_data, GFP_NOIO);
+		if (err) {
+			clear_bit(NFCMRVL_USB_BULK_RUNNING, &drv_data->flags);
+			goto failed;
+		}
+
+		nfcmrvl_submit_bulk_urb(drv_data, GFP_NOIO);
+	}
+
+	spin_lock_irq(&drv_data->txlock);
+	nfcmrvl_play_deferred(drv_data);
+	clear_bit(NFCMRVL_USB_SUSPENDING, &drv_data->flags);
+	spin_unlock_irq(&drv_data->txlock);
+
+	return 0;
+
+failed:
+	usb_scuttle_anchored_urbs(&drv_data->deferred);
+done:
+	spin_lock_irq(&drv_data->txlock);
+	clear_bit(NFCMRVL_USB_SUSPENDING, &drv_data->flags);
+	spin_unlock_irq(&drv_data->txlock);
+
+	return err;
+}
+#endif
+
+static struct usb_driver nfcmrvl_usb_driver = {
+	.name		= "nfcmrvl",
+	.probe		= nfcmrvl_probe,
+	.disconnect	= nfcmrvl_disconnect,
+#ifdef CONFIG_PM
+	.suspend	= nfcmrvl_suspend,
+	.resume		= nfcmrvl_resume,
+	.reset_resume	= nfcmrvl_resume,
+#endif
+	.id_table	= nfcmrvl_table,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+	.soft_unbind = 1,
+};
+module_usb_driver(nfcmrvl_usb_driver);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell NFC-over-USB driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nfc/nfcsim.c b/drivers/nfc/nfcsim.c
new file mode 100644
index 000000000..533e3aa62
--- /dev/null
+++ b/drivers/nfc/nfcsim.c
@@ -0,0 +1,513 @@
+/*
+ * NFC hardware simulation driver
+ * Copyright (c) 2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/nfc.h>
+#include <net/nfc/nfc.h>
+#include <net/nfc/digital.h>
+
+#define NFCSIM_ERR(d, fmt, args...) nfc_err(&d->nfc_digital_dev->nfc_dev->dev, \
+					    "%s: " fmt, __func__, ## args)
+
+#define NFCSIM_DBG(d, fmt, args...) dev_dbg(&d->nfc_digital_dev->nfc_dev->dev, \
+					    "%s: " fmt, __func__, ## args)
+
+#define NFCSIM_VERSION "0.2"
+
+#define NFCSIM_MODE_NONE	0
+#define NFCSIM_MODE_INITIATOR	1
+#define NFCSIM_MODE_TARGET	2
+
+#define NFCSIM_CAPABILITIES (NFC_DIGITAL_DRV_CAPS_IN_CRC   | \
+			     NFC_DIGITAL_DRV_CAPS_TG_CRC)
+
+struct nfcsim {
+	struct nfc_digital_dev *nfc_digital_dev;
+
+	struct work_struct recv_work;
+	struct delayed_work send_work;
+
+	struct nfcsim_link *link_in;
+	struct nfcsim_link *link_out;
+
+	bool up;
+	u8 mode;
+	u8 rf_tech;
+
+	u16 recv_timeout;
+
+	nfc_digital_cmd_complete_t cb;
+	void *arg;
+
+	u8 dropframe;
+};
+
+struct nfcsim_link {
+	struct mutex lock;
+
+	u8 rf_tech;
+	u8 mode;
+
+	u8 shutdown;
+
+	struct sk_buff *skb;
+	wait_queue_head_t recv_wait;
+	u8 cond;
+};
+
+static struct nfcsim_link *nfcsim_link_new(void)
+{
+	struct nfcsim_link *link;
+
+	link = kzalloc(sizeof(struct nfcsim_link), GFP_KERNEL);
+	if (!link)
+		return NULL;
+
+	mutex_init(&link->lock);
+	init_waitqueue_head(&link->recv_wait);
+
+	return link;
+}
+
+static void nfcsim_link_free(struct nfcsim_link *link)
+{
+	dev_kfree_skb(link->skb);
+	kfree(link);
+}
+
+static void nfcsim_link_recv_wake(struct nfcsim_link *link)
+{
+	link->cond = 1;
+	wake_up_interruptible(&link->recv_wait);
+}
+
+static void nfcsim_link_set_skb(struct nfcsim_link *link, struct sk_buff *skb,
+				u8 rf_tech, u8 mode)
+{
+	mutex_lock(&link->lock);
+
+	dev_kfree_skb(link->skb);
+	link->skb = skb;
+	link->rf_tech = rf_tech;
+	link->mode = mode;
+
+	mutex_unlock(&link->lock);
+}
+
+static void nfcsim_link_recv_cancel(struct nfcsim_link *link)
+{
+	mutex_lock(&link->lock);
+
+	link->mode = NFCSIM_MODE_NONE;
+
+	mutex_unlock(&link->lock);
+
+	nfcsim_link_recv_wake(link);
+}
+
+static void nfcsim_link_shutdown(struct nfcsim_link *link)
+{
+	mutex_lock(&link->lock);
+
+	link->shutdown = 1;
+	link->mode = NFCSIM_MODE_NONE;
+
+	mutex_unlock(&link->lock);
+
+	nfcsim_link_recv_wake(link);
+}
+
+static struct sk_buff *nfcsim_link_recv_skb(struct nfcsim_link *link,
+					    int timeout, u8 rf_tech, u8 mode)
+{
+	int rc;
+	struct sk_buff *skb;
+
+	rc = wait_event_interruptible_timeout(link->recv_wait,
+					      link->cond,
+					      msecs_to_jiffies(timeout));
+
+	mutex_lock(&link->lock);
+
+	skb = link->skb;
+	link->skb = NULL;
+
+	if (!rc) {
+		rc = -ETIMEDOUT;
+		goto done;
+	}
+
+	if (!skb || link->rf_tech != rf_tech || link->mode == mode) {
+		rc = -EINVAL;
+		goto done;
+	}
+
+	if (link->shutdown) {
+		rc = -ENODEV;
+		goto done;
+	}
+
+done:
+	mutex_unlock(&link->lock);
+
+	if (rc < 0) {
+		dev_kfree_skb(skb);
+		skb = ERR_PTR(rc);
+	}
+
+	link->cond = 0;
+
+	return skb;
+}
+
+static void nfcsim_send_wq(struct work_struct *work)
+{
+	struct nfcsim *dev = container_of(work, struct nfcsim, send_work.work);
+
+	/*
+	 * To effectively send data, the device just wake up its link_out which
+	 * is the link_in of the peer device. The exchanged skb has already been
+	 * stored in the dev->link_out through nfcsim_link_set_skb().
+	 */
+	nfcsim_link_recv_wake(dev->link_out);
+}
+
+static void nfcsim_recv_wq(struct work_struct *work)
+{
+	struct nfcsim *dev = container_of(work, struct nfcsim, recv_work);
+	struct sk_buff *skb;
+
+	skb = nfcsim_link_recv_skb(dev->link_in, dev->recv_timeout,
+				   dev->rf_tech, dev->mode);
+
+	if (!dev->up) {
+		NFCSIM_ERR(dev, "Device is down\n");
+
+		if (!IS_ERR(skb))
+			dev_kfree_skb(skb);
+		return;
+	}
+
+	dev->cb(dev->nfc_digital_dev, dev->arg, skb);
+}
+
+static int nfcsim_send(struct nfc_digital_dev *ddev, struct sk_buff *skb,
+		       u16 timeout, nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct nfcsim *dev = nfc_digital_get_drvdata(ddev);
+	u8 delay;
+
+	if (!dev->up) {
+		NFCSIM_ERR(dev, "Device is down\n");
+		return -ENODEV;
+	}
+
+	dev->recv_timeout = timeout;
+	dev->cb = cb;
+	dev->arg = arg;
+
+	schedule_work(&dev->recv_work);
+
+	if (dev->dropframe) {
+		NFCSIM_DBG(dev, "dropping frame (out of %d)\n", dev->dropframe);
+		dev_kfree_skb(skb);
+		dev->dropframe--;
+
+		return 0;
+	}
+
+	if (skb) {
+		nfcsim_link_set_skb(dev->link_out, skb, dev->rf_tech,
+				    dev->mode);
+
+		/* Add random delay (between 3 and 10 ms) before sending data */
+		get_random_bytes(&delay, 1);
+		delay = 3 + (delay & 0x07);
+
+		schedule_delayed_work(&dev->send_work, msecs_to_jiffies(delay));
+	}
+
+	return 0;
+}
+
+static void nfcsim_abort_cmd(struct nfc_digital_dev *ddev)
+{
+	struct nfcsim *dev = nfc_digital_get_drvdata(ddev);
+
+	nfcsim_link_recv_cancel(dev->link_in);
+}
+
+static int nfcsim_switch_rf(struct nfc_digital_dev *ddev, bool on)
+{
+	struct nfcsim *dev = nfc_digital_get_drvdata(ddev);
+
+	dev->up = on;
+
+	return 0;
+}
+
+static int nfcsim_in_configure_hw(struct nfc_digital_dev *ddev,
+					  int type, int param)
+{
+	struct nfcsim *dev = nfc_digital_get_drvdata(ddev);
+
+	switch (type) {
+	case NFC_DIGITAL_CONFIG_RF_TECH:
+		dev->up = true;
+		dev->mode = NFCSIM_MODE_INITIATOR;
+		dev->rf_tech = param;
+		break;
+
+	case NFC_DIGITAL_CONFIG_FRAMING:
+		break;
+
+	default:
+		NFCSIM_ERR(dev, "Invalid configuration type: %d\n", type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int nfcsim_in_send_cmd(struct nfc_digital_dev *ddev,
+			       struct sk_buff *skb, u16 timeout,
+			       nfc_digital_cmd_complete_t cb, void *arg)
+{
+	return nfcsim_send(ddev, skb, timeout, cb, arg);
+}
+
+static int nfcsim_tg_configure_hw(struct nfc_digital_dev *ddev,
+					  int type, int param)
+{
+	struct nfcsim *dev = nfc_digital_get_drvdata(ddev);
+
+	switch (type) {
+	case NFC_DIGITAL_CONFIG_RF_TECH:
+		dev->up = true;
+		dev->mode = NFCSIM_MODE_TARGET;
+		dev->rf_tech = param;
+		break;
+
+	case NFC_DIGITAL_CONFIG_FRAMING:
+		break;
+
+	default:
+		NFCSIM_ERR(dev, "Invalid configuration type: %d\n", type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int nfcsim_tg_send_cmd(struct nfc_digital_dev *ddev,
+			       struct sk_buff *skb, u16 timeout,
+			       nfc_digital_cmd_complete_t cb, void *arg)
+{
+	return nfcsim_send(ddev, skb, timeout, cb, arg);
+}
+
+static int nfcsim_tg_listen(struct nfc_digital_dev *ddev, u16 timeout,
+			    nfc_digital_cmd_complete_t cb, void *arg)
+{
+	return nfcsim_send(ddev, NULL, timeout, cb, arg);
+}
+
+static struct nfc_digital_ops nfcsim_digital_ops = {
+	.in_configure_hw = nfcsim_in_configure_hw,
+	.in_send_cmd = nfcsim_in_send_cmd,
+
+	.tg_listen = nfcsim_tg_listen,
+	.tg_configure_hw = nfcsim_tg_configure_hw,
+	.tg_send_cmd = nfcsim_tg_send_cmd,
+
+	.abort_cmd = nfcsim_abort_cmd,
+	.switch_rf = nfcsim_switch_rf,
+};
+
+static struct dentry *nfcsim_debugfs_root;
+
+static void nfcsim_debugfs_init(void)
+{
+	nfcsim_debugfs_root = debugfs_create_dir("nfcsim", NULL);
+
+	if (!nfcsim_debugfs_root)
+		pr_err("Could not create debugfs entry\n");
+
+}
+
+static void nfcsim_debugfs_remove(void)
+{
+	debugfs_remove_recursive(nfcsim_debugfs_root);
+}
+
+static void nfcsim_debugfs_init_dev(struct nfcsim *dev)
+{
+	struct dentry *dev_dir;
+	char devname[5]; /* nfcX\0 */
+	u32 idx;
+	int n;
+
+	if (!nfcsim_debugfs_root) {
+		NFCSIM_ERR(dev, "nfcsim debugfs not initialized\n");
+		return;
+	}
+
+	idx = dev->nfc_digital_dev->nfc_dev->idx;
+	n = snprintf(devname, sizeof(devname), "nfc%d", idx);
+	if (n >= sizeof(devname)) {
+		NFCSIM_ERR(dev, "Could not compute dev name for dev %d\n", idx);
+		return;
+	}
+
+	dev_dir = debugfs_create_dir(devname, nfcsim_debugfs_root);
+	if (!dev_dir) {
+		NFCSIM_ERR(dev, "Could not create debugfs entries for nfc%d\n",
+			   idx);
+		return;
+	}
+
+	debugfs_create_u8("dropframe", 0664, dev_dir, &dev->dropframe);
+}
+
+static struct nfcsim *nfcsim_device_new(struct nfcsim_link *link_in,
+					struct nfcsim_link *link_out)
+{
+	struct nfcsim *dev;
+	int rc;
+
+	dev = kzalloc(sizeof(struct nfcsim), GFP_KERNEL);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_DELAYED_WORK(&dev->send_work, nfcsim_send_wq);
+	INIT_WORK(&dev->recv_work, nfcsim_recv_wq);
+
+	dev->nfc_digital_dev =
+			nfc_digital_allocate_device(&nfcsim_digital_ops,
+						    NFC_PROTO_NFC_DEP_MASK,
+						    NFCSIM_CAPABILITIES,
+						    0, 0);
+	if (!dev->nfc_digital_dev) {
+		kfree(dev);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	nfc_digital_set_drvdata(dev->nfc_digital_dev, dev);
+
+	dev->link_in = link_in;
+	dev->link_out = link_out;
+
+	rc = nfc_digital_register_device(dev->nfc_digital_dev);
+	if (rc) {
+		pr_err("Could not register digital device (%d)\n", rc);
+		nfc_digital_free_device(dev->nfc_digital_dev);
+		kfree(dev);
+
+		return ERR_PTR(rc);
+	}
+
+	nfcsim_debugfs_init_dev(dev);
+
+	return dev;
+}
+
+static void nfcsim_device_free(struct nfcsim *dev)
+{
+	nfc_digital_unregister_device(dev->nfc_digital_dev);
+
+	dev->up = false;
+
+	nfcsim_link_shutdown(dev->link_in);
+
+	cancel_delayed_work_sync(&dev->send_work);
+	cancel_work_sync(&dev->recv_work);
+
+	nfc_digital_free_device(dev->nfc_digital_dev);
+
+	kfree(dev);
+}
+
+static struct nfcsim *dev0;
+static struct nfcsim *dev1;
+
+static int __init nfcsim_init(void)
+{
+	struct nfcsim_link *link0, *link1;
+	int rc;
+
+	link0 = nfcsim_link_new();
+	link1 = nfcsim_link_new();
+	if (!link0 || !link1) {
+		rc = -ENOMEM;
+		goto exit_err;
+	}
+
+	nfcsim_debugfs_init();
+
+	dev0 = nfcsim_device_new(link0, link1);
+	if (IS_ERR(dev0)) {
+		rc = PTR_ERR(dev0);
+		goto exit_err;
+	}
+
+	dev1 = nfcsim_device_new(link1, link0);
+	if (IS_ERR(dev1)) {
+		nfcsim_device_free(dev0);
+
+		rc = PTR_ERR(dev1);
+		goto exit_err;
+	}
+
+	pr_info("nfcsim " NFCSIM_VERSION " initialized\n");
+
+	return 0;
+
+exit_err:
+	pr_err("Failed to initialize nfcsim driver (%d)\n", rc);
+
+	if (link0)
+		nfcsim_link_free(link0);
+	if (link1)
+		nfcsim_link_free(link1);
+
+	return rc;
+}
+
+static void __exit nfcsim_exit(void)
+{
+	struct nfcsim_link *link0, *link1;
+
+	link0 = dev0->link_in;
+	link1 = dev0->link_out;
+
+	nfcsim_device_free(dev0);
+	nfcsim_device_free(dev1);
+
+	nfcsim_link_free(link0);
+	nfcsim_link_free(link1);
+
+	nfcsim_debugfs_remove();
+}
+
+module_init(nfcsim_init);
+module_exit(nfcsim_exit);
+
+MODULE_DESCRIPTION("NFCSim driver ver " NFCSIM_VERSION);
+MODULE_VERSION(NFCSIM_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/nfc/nxp-nci/Kconfig b/drivers/nfc/nxp-nci/Kconfig
new file mode 100644
index 000000000..37b406125
--- /dev/null
+++ b/drivers/nfc/nxp-nci/Kconfig
@@ -0,0 +1,25 @@
+config NFC_NXP_NCI
+	tristate "NXP-NCI NFC driver"
+	depends on NFC_NCI
+	default n
+	---help---
+	  Generic core driver for NXP NCI chips such as the NPC100
+	  or PN7150 families.
+	  This is a driver based on the NCI NFC kernel layers and
+	  will thus not work with NXP libnfc library.
+
+	  To compile this driver as a module, choose m here. The module will
+	  be called nxp_nci.
+	  Say N if unsure.
+
+config NFC_NXP_NCI_I2C
+	tristate "NXP-NCI I2C support"
+	depends on NFC_NXP_NCI && I2C
+	---help---
+	  This module adds support for an I2C interface to the NXP NCI
+	  chips.
+	  Select this if your platform is using the I2C bus.
+
+	  To compile this driver as a module, choose m here. The module will
+	  be called nxp_nci_i2c.
+	  Say Y if unsure.
diff --git a/drivers/nfc/nxp-nci/Makefile b/drivers/nfc/nxp-nci/Makefile
new file mode 100644
index 000000000..c9ec7869d
--- /dev/null
+++ b/drivers/nfc/nxp-nci/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for NXP-NCI NFC driver
+#
+
+nxp-nci-objs = core.o firmware.o
+nxp-nci_i2c-objs = i2c.o
+
+obj-$(CONFIG_NFC_NXP_NCI) += nxp-nci.o
+obj-$(CONFIG_NFC_NXP_NCI_I2C) += nxp-nci_i2c.o
diff --git a/drivers/nfc/nxp-nci/core.c b/drivers/nfc/nxp-nci/core.c
new file mode 100644
index 000000000..2e4b004a9
--- /dev/null
+++ b/drivers/nfc/nxp-nci/core.c
@@ -0,0 +1,187 @@
+/*
+ * Generic driver for NXP NCI NFC chips
+ *
+ * Copyright (C) 2014  NXP Semiconductors  All rights reserved.
+ *
+ * Authors: Clément Perrochaud <clement.perrochaud@nxp.com>
+ *
+ * Derived from PN544 device driver:
+ * Copyright (C) 2012  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <linux/platform_data/nxp-nci.h>
+
+#include <net/nfc/nci_core.h>
+
+#include "nxp-nci.h"
+
+#define NXP_NCI_HDR_LEN	4
+
+#define NXP_NCI_NFC_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \
+			       NFC_PROTO_MIFARE_MASK | \
+			       NFC_PROTO_FELICA_MASK | \
+			       NFC_PROTO_ISO14443_MASK | \
+			       NFC_PROTO_ISO14443_B_MASK | \
+			       NFC_PROTO_NFC_DEP_MASK)
+
+static int nxp_nci_open(struct nci_dev *ndev)
+{
+	struct nxp_nci_info *info = nci_get_drvdata(ndev);
+	int r = 0;
+
+	mutex_lock(&info->info_lock);
+
+	if (info->mode != NXP_NCI_MODE_COLD) {
+		r = -EBUSY;
+		goto open_exit;
+	}
+
+	if (info->phy_ops->set_mode)
+		r = info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_NCI);
+
+	info->mode = NXP_NCI_MODE_NCI;
+
+open_exit:
+	mutex_unlock(&info->info_lock);
+	return r;
+}
+
+static int nxp_nci_close(struct nci_dev *ndev)
+{
+	struct nxp_nci_info *info = nci_get_drvdata(ndev);
+	int r = 0;
+
+	mutex_lock(&info->info_lock);
+
+	if (info->phy_ops->set_mode)
+		r = info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_COLD);
+
+	info->mode = NXP_NCI_MODE_COLD;
+
+	mutex_unlock(&info->info_lock);
+	return r;
+}
+
+static int nxp_nci_send(struct nci_dev *ndev, struct sk_buff *skb)
+{
+	struct nxp_nci_info *info = nci_get_drvdata(ndev);
+	int r;
+
+	if (!info->phy_ops->write) {
+		r = -ENOTSUPP;
+		goto send_exit;
+	}
+
+	if (info->mode != NXP_NCI_MODE_NCI) {
+		r = -EINVAL;
+		goto send_exit;
+	}
+
+	r = info->phy_ops->write(info->phy_id, skb);
+	if (r < 0)
+		kfree_skb(skb);
+
+send_exit:
+	return r;
+}
+
+static struct nci_ops nxp_nci_ops = {
+	.open = nxp_nci_open,
+	.close = nxp_nci_close,
+	.send = nxp_nci_send,
+	.fw_download = nxp_nci_fw_download,
+};
+
+int nxp_nci_probe(void *phy_id, struct device *pdev,
+		  const struct nxp_nci_phy_ops *phy_ops,
+		  unsigned int max_payload,
+		  struct nci_dev **ndev)
+{
+	struct nxp_nci_info *info;
+	int r;
+
+	info = devm_kzalloc(pdev, sizeof(struct nxp_nci_info), GFP_KERNEL);
+	if (!info) {
+		r = -ENOMEM;
+		goto probe_exit;
+	}
+
+	info->phy_id = phy_id;
+	info->pdev = pdev;
+	info->phy_ops = phy_ops;
+	info->max_payload = max_payload;
+	INIT_WORK(&info->fw_info.work, nxp_nci_fw_work);
+	init_completion(&info->fw_info.cmd_completion);
+	mutex_init(&info->info_lock);
+
+	if (info->phy_ops->set_mode) {
+		r = info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_COLD);
+		if (r < 0)
+			goto probe_exit;
+	}
+
+	info->mode = NXP_NCI_MODE_COLD;
+
+	info->ndev = nci_allocate_device(&nxp_nci_ops, NXP_NCI_NFC_PROTOCOLS,
+					 NXP_NCI_HDR_LEN, 0);
+	if (!info->ndev) {
+		r = -ENOMEM;
+		goto probe_exit;
+	}
+
+	nci_set_parent_dev(info->ndev, pdev);
+	nci_set_drvdata(info->ndev, info);
+	r = nci_register_device(info->ndev);
+	if (r < 0)
+		goto probe_exit_free_nci;
+
+	*ndev = info->ndev;
+
+	goto probe_exit;
+
+probe_exit_free_nci:
+	nci_free_device(info->ndev);
+probe_exit:
+	return r;
+}
+EXPORT_SYMBOL(nxp_nci_probe);
+
+void nxp_nci_remove(struct nci_dev *ndev)
+{
+	struct nxp_nci_info *info = nci_get_drvdata(ndev);
+
+	if (info->mode == NXP_NCI_MODE_FW)
+		nxp_nci_fw_work_complete(info, -ESHUTDOWN);
+	cancel_work_sync(&info->fw_info.work);
+
+	mutex_lock(&info->info_lock);
+
+	if (info->phy_ops->set_mode)
+		info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_COLD);
+
+	nci_unregister_device(ndev);
+	nci_free_device(ndev);
+
+	mutex_unlock(&info->info_lock);
+}
+EXPORT_SYMBOL(nxp_nci_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("NXP NCI NFC driver");
+MODULE_AUTHOR("Clément Perrochaud <clement.perrochaud@nxp.com>");
diff --git a/drivers/nfc/nxp-nci/firmware.c b/drivers/nfc/nxp-nci/firmware.c
new file mode 100644
index 000000000..e50c6f67b
--- /dev/null
+++ b/drivers/nfc/nxp-nci/firmware.c
@@ -0,0 +1,323 @@
+/*
+ * Generic driver for NXP NCI NFC chips
+ *
+ * Copyright (C) 2014  NXP Semiconductors  All rights reserved.
+ *
+ * Author: Clément Perrochaud <clement.perrochaud@nxp.com>
+ *
+ * Derived from PN544 device driver:
+ * Copyright (C) 2012  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/completion.h>
+#include <linux/firmware.h>
+#include <linux/nfc.h>
+#include <asm/unaligned.h>
+
+#include "nxp-nci.h"
+
+/* Crypto operations can take up to 30 seconds */
+#define NXP_NCI_FW_ANSWER_TIMEOUT	msecs_to_jiffies(30000)
+
+#define NXP_NCI_FW_CMD_RESET		0xF0
+#define NXP_NCI_FW_CMD_GETVERSION	0xF1
+#define NXP_NCI_FW_CMD_CHECKINTEGRITY	0xE0
+#define NXP_NCI_FW_CMD_WRITE		0xC0
+#define NXP_NCI_FW_CMD_READ		0xA2
+#define NXP_NCI_FW_CMD_GETSESSIONSTATE	0xF2
+#define NXP_NCI_FW_CMD_LOG		0xA7
+#define NXP_NCI_FW_CMD_FORCE		0xD0
+#define NXP_NCI_FW_CMD_GET_DIE_ID	0xF4
+
+#define NXP_NCI_FW_CHUNK_FLAG	0x0400
+
+#define NXP_NCI_FW_RESULT_OK				0x00
+#define NXP_NCI_FW_RESULT_INVALID_ADDR			0x01
+#define NXP_NCI_FW_RESULT_GENERIC_ERROR			0x02
+#define NXP_NCI_FW_RESULT_UNKNOWN_CMD			0x0B
+#define NXP_NCI_FW_RESULT_ABORTED_CMD			0x0C
+#define NXP_NCI_FW_RESULT_PLL_ERROR			0x0D
+#define NXP_NCI_FW_RESULT_ADDR_RANGE_OFL_ERROR		0x1E
+#define NXP_NCI_FW_RESULT_BUFFER_OFL_ERROR		0x1F
+#define NXP_NCI_FW_RESULT_MEM_BSY			0x20
+#define NXP_NCI_FW_RESULT_SIGNATURE_ERROR		0x21
+#define NXP_NCI_FW_RESULT_FIRMWARE_VERSION_ERROR	0x24
+#define NXP_NCI_FW_RESULT_PROTOCOL_ERROR		0x28
+#define NXP_NCI_FW_RESULT_SFWU_DEGRADED			0x2A
+#define NXP_NCI_FW_RESULT_PH_STATUS_FIRST_CHUNK		0x2D
+#define NXP_NCI_FW_RESULT_PH_STATUS_NEXT_CHUNK		0x2E
+#define NXP_NCI_FW_RESULT_PH_STATUS_INTERNAL_ERROR_5	0xC5
+
+void nxp_nci_fw_work_complete(struct nxp_nci_info *info, int result)
+{
+	struct nxp_nci_fw_info *fw_info = &info->fw_info;
+	int r;
+
+	if (info->phy_ops->set_mode) {
+		r = info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_COLD);
+		if (r < 0 && result == 0)
+			result = -r;
+	}
+
+	info->mode = NXP_NCI_MODE_COLD;
+
+	if (fw_info->fw) {
+		release_firmware(fw_info->fw);
+		fw_info->fw = NULL;
+	}
+
+	nfc_fw_download_done(info->ndev->nfc_dev, fw_info->name, (u32) -result);
+}
+
+/* crc_ccitt cannot be used since it is computed MSB first and not LSB first */
+static u16 nxp_nci_fw_crc(u8 const *buffer, size_t len)
+{
+	u16 crc = 0xffff;
+
+	while (len--) {
+		crc = ((crc >> 8) | (crc << 8)) ^ *buffer++;
+		crc ^= (crc & 0xff) >> 4;
+		crc ^= (crc & 0xff) << 12;
+		crc ^= (crc & 0xff) << 5;
+	}
+
+	return crc;
+}
+
+static int nxp_nci_fw_send_chunk(struct nxp_nci_info *info)
+{
+	struct nxp_nci_fw_info *fw_info = &info->fw_info;
+	u16 header, crc;
+	struct sk_buff *skb;
+	size_t chunk_len;
+	size_t remaining_len;
+	int r;
+
+	skb = nci_skb_alloc(info->ndev, info->max_payload, GFP_KERNEL);
+	if (!skb) {
+		r = -ENOMEM;
+		goto chunk_exit;
+	}
+
+	chunk_len = info->max_payload - NXP_NCI_FW_HDR_LEN - NXP_NCI_FW_CRC_LEN;
+	remaining_len = fw_info->frame_size - fw_info->written;
+
+	if (remaining_len > chunk_len) {
+		header = NXP_NCI_FW_CHUNK_FLAG;
+	} else {
+		chunk_len = remaining_len;
+		header = 0x0000;
+	}
+
+	header |= chunk_len & NXP_NCI_FW_FRAME_LEN_MASK;
+	put_unaligned_be16(header, skb_put(skb, NXP_NCI_FW_HDR_LEN));
+
+	skb_put_data(skb, fw_info->data + fw_info->written, chunk_len);
+
+	crc = nxp_nci_fw_crc(skb->data, chunk_len + NXP_NCI_FW_HDR_LEN);
+	put_unaligned_be16(crc, skb_put(skb, NXP_NCI_FW_CRC_LEN));
+
+	r = info->phy_ops->write(info->phy_id, skb);
+	if (r >= 0)
+		r = chunk_len;
+
+	kfree_skb(skb);
+
+chunk_exit:
+	return r;
+}
+
+static int nxp_nci_fw_send(struct nxp_nci_info *info)
+{
+	struct nxp_nci_fw_info *fw_info = &info->fw_info;
+	long completion_rc;
+	int r;
+
+	reinit_completion(&fw_info->cmd_completion);
+
+	if (fw_info->written == 0) {
+		fw_info->frame_size = get_unaligned_be16(fw_info->data) &
+				      NXP_NCI_FW_FRAME_LEN_MASK;
+		fw_info->data += NXP_NCI_FW_HDR_LEN;
+		fw_info->size -= NXP_NCI_FW_HDR_LEN;
+	}
+
+	if (fw_info->frame_size > fw_info->size)
+		return -EMSGSIZE;
+
+	r = nxp_nci_fw_send_chunk(info);
+	if (r < 0)
+		return r;
+
+	fw_info->written += r;
+
+	if (*fw_info->data == NXP_NCI_FW_CMD_RESET) {
+		fw_info->cmd_result = 0;
+		if (fw_info->fw)
+			schedule_work(&fw_info->work);
+	} else {
+		completion_rc = wait_for_completion_interruptible_timeout(
+			&fw_info->cmd_completion, NXP_NCI_FW_ANSWER_TIMEOUT);
+		if (completion_rc == 0)
+			return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+void nxp_nci_fw_work(struct work_struct *work)
+{
+	struct nxp_nci_info *info;
+	struct nxp_nci_fw_info *fw_info;
+	int r;
+
+	fw_info = container_of(work, struct nxp_nci_fw_info, work);
+	info = container_of(fw_info, struct nxp_nci_info, fw_info);
+
+	mutex_lock(&info->info_lock);
+
+	r = fw_info->cmd_result;
+	if (r < 0)
+		goto exit_work;
+
+	if (fw_info->written == fw_info->frame_size) {
+		fw_info->data += fw_info->frame_size;
+		fw_info->size -= fw_info->frame_size;
+		fw_info->written = 0;
+	}
+
+	if (fw_info->size > 0)
+		r = nxp_nci_fw_send(info);
+
+exit_work:
+	if (r < 0 || fw_info->size == 0)
+		nxp_nci_fw_work_complete(info, r);
+	mutex_unlock(&info->info_lock);
+}
+
+int nxp_nci_fw_download(struct nci_dev *ndev, const char *firmware_name)
+{
+	struct nxp_nci_info *info = nci_get_drvdata(ndev);
+	struct nxp_nci_fw_info *fw_info = &info->fw_info;
+	int r;
+
+	mutex_lock(&info->info_lock);
+
+	if (!info->phy_ops->set_mode || !info->phy_ops->write) {
+		r = -ENOTSUPP;
+		goto fw_download_exit;
+	}
+
+	if (!firmware_name || firmware_name[0] == '\0') {
+		r = -EINVAL;
+		goto fw_download_exit;
+	}
+
+	strcpy(fw_info->name, firmware_name);
+
+	r = request_firmware(&fw_info->fw, firmware_name,
+			     ndev->nfc_dev->dev.parent);
+	if (r < 0)
+		goto fw_download_exit;
+
+	r = info->phy_ops->set_mode(info->phy_id, NXP_NCI_MODE_FW);
+	if (r < 0) {
+		release_firmware(fw_info->fw);
+		goto fw_download_exit;
+	}
+
+	info->mode = NXP_NCI_MODE_FW;
+
+	fw_info->data = fw_info->fw->data;
+	fw_info->size = fw_info->fw->size;
+	fw_info->written = 0;
+	fw_info->frame_size = 0;
+	fw_info->cmd_result = 0;
+
+	schedule_work(&fw_info->work);
+
+fw_download_exit:
+	mutex_unlock(&info->info_lock);
+	return r;
+}
+
+static int nxp_nci_fw_read_status(u8 stat)
+{
+	switch (stat) {
+	case NXP_NCI_FW_RESULT_OK:
+		return 0;
+	case NXP_NCI_FW_RESULT_INVALID_ADDR:
+		return -EINVAL;
+	case NXP_NCI_FW_RESULT_UNKNOWN_CMD:
+		return -EINVAL;
+	case NXP_NCI_FW_RESULT_ABORTED_CMD:
+		return -EMSGSIZE;
+	case NXP_NCI_FW_RESULT_ADDR_RANGE_OFL_ERROR:
+		return -EADDRNOTAVAIL;
+	case NXP_NCI_FW_RESULT_BUFFER_OFL_ERROR:
+		return -ENOBUFS;
+	case NXP_NCI_FW_RESULT_MEM_BSY:
+		return -ENOKEY;
+	case NXP_NCI_FW_RESULT_SIGNATURE_ERROR:
+		return -EKEYREJECTED;
+	case NXP_NCI_FW_RESULT_FIRMWARE_VERSION_ERROR:
+		return -EALREADY;
+	case NXP_NCI_FW_RESULT_PROTOCOL_ERROR:
+		return -EPROTO;
+	case NXP_NCI_FW_RESULT_SFWU_DEGRADED:
+		return -EHWPOISON;
+	case NXP_NCI_FW_RESULT_PH_STATUS_FIRST_CHUNK:
+		return 0;
+	case NXP_NCI_FW_RESULT_PH_STATUS_NEXT_CHUNK:
+		return 0;
+	case NXP_NCI_FW_RESULT_PH_STATUS_INTERNAL_ERROR_5:
+		return -EINVAL;
+	default:
+		return -EIO;
+	}
+}
+
+static u16 nxp_nci_fw_check_crc(struct sk_buff *skb)
+{
+	u16 crc, frame_crc;
+	size_t len = skb->len - NXP_NCI_FW_CRC_LEN;
+
+	crc = nxp_nci_fw_crc(skb->data, len);
+	frame_crc = get_unaligned_be16(skb->data + len);
+
+	return (crc ^ frame_crc);
+}
+
+void nxp_nci_fw_recv_frame(struct nci_dev *ndev, struct sk_buff *skb)
+{
+	struct nxp_nci_info *info = nci_get_drvdata(ndev);
+	struct nxp_nci_fw_info *fw_info = &info->fw_info;
+
+	complete(&fw_info->cmd_completion);
+
+	if (skb) {
+		if (nxp_nci_fw_check_crc(skb) != 0x00)
+			fw_info->cmd_result = -EBADMSG;
+		else
+			fw_info->cmd_result = nxp_nci_fw_read_status(*(u8 *)skb_pull(skb, NXP_NCI_FW_HDR_LEN));
+		kfree_skb(skb);
+	} else {
+		fw_info->cmd_result = -EIO;
+	}
+
+	if (fw_info->fw)
+		schedule_work(&fw_info->work);
+}
+EXPORT_SYMBOL(nxp_nci_fw_recv_frame);
diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
new file mode 100644
index 000000000..0df745cad
--- /dev/null
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -0,0 +1,434 @@
+/*
+ * I2C link layer for the NXP NCI driver
+ *
+ * Copyright (C) 2014  NXP Semiconductors  All rights reserved.
+ * Copyright (C) 2012-2015  Intel Corporation. All rights reserved.
+ *
+ * Authors: Clément Perrochaud <clement.perrochaud@nxp.com>
+ * Authors: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
+ *
+ * Derived from PN544 device driver:
+ * Copyright (C) 2012  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/platform_data/nxp-nci.h>
+#include <asm/unaligned.h>
+
+#include <net/nfc/nfc.h>
+
+#include "nxp-nci.h"
+
+#define NXP_NCI_I2C_DRIVER_NAME	"nxp-nci_i2c"
+
+#define NXP_NCI_I2C_MAX_PAYLOAD	32
+
+struct nxp_nci_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct nci_dev *ndev;
+
+	unsigned int gpio_en;
+	unsigned int gpio_fw;
+
+	int hard_fault; /*
+			 * < 0 if hardware error occurred (e.g. i2c err)
+			 * and prevents normal operation.
+			 */
+};
+
+static int nxp_nci_i2c_set_mode(void *phy_id,
+				    enum nxp_nci_mode mode)
+{
+	struct nxp_nci_i2c_phy *phy = (struct nxp_nci_i2c_phy *) phy_id;
+
+	gpio_set_value(phy->gpio_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0);
+	gpio_set_value(phy->gpio_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0);
+	usleep_range(10000, 15000);
+
+	if (mode == NXP_NCI_MODE_COLD)
+		phy->hard_fault = 0;
+
+	return 0;
+}
+
+static int nxp_nci_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+	int r;
+	struct nxp_nci_i2c_phy *phy = phy_id;
+	struct i2c_client *client = phy->i2c_dev;
+
+	if (phy->hard_fault != 0)
+		return phy->hard_fault;
+
+	r = i2c_master_send(client, skb->data, skb->len);
+	if (r < 0) {
+		/* Retry, chip was in standby */
+		msleep(110);
+		r = i2c_master_send(client, skb->data, skb->len);
+	}
+
+	if (r < 0) {
+		nfc_err(&client->dev, "Error %d on I2C send\n", r);
+	} else if (r != skb->len) {
+		nfc_err(&client->dev,
+			"Invalid length sent: %u (expected %u)\n",
+			r, skb->len);
+		r = -EREMOTEIO;
+	} else {
+		/* Success but return 0 and not number of bytes */
+		r = 0;
+	}
+
+	return r;
+}
+
+static const struct nxp_nci_phy_ops i2c_phy_ops = {
+	.set_mode = nxp_nci_i2c_set_mode,
+	.write = nxp_nci_i2c_write,
+};
+
+static int nxp_nci_i2c_fw_read(struct nxp_nci_i2c_phy *phy,
+			       struct sk_buff **skb)
+{
+	struct i2c_client *client = phy->i2c_dev;
+	u16 header;
+	size_t frame_len;
+	int r;
+
+	r = i2c_master_recv(client, (u8 *) &header, NXP_NCI_FW_HDR_LEN);
+	if (r < 0) {
+		goto fw_read_exit;
+	} else if (r != NXP_NCI_FW_HDR_LEN) {
+		nfc_err(&client->dev, "Incorrect header length: %u\n", r);
+		r = -EBADMSG;
+		goto fw_read_exit;
+	}
+
+	frame_len = (be16_to_cpu(header) & NXP_NCI_FW_FRAME_LEN_MASK) +
+		    NXP_NCI_FW_CRC_LEN;
+
+	*skb = alloc_skb(NXP_NCI_FW_HDR_LEN + frame_len, GFP_KERNEL);
+	if (*skb == NULL) {
+		r = -ENOMEM;
+		goto fw_read_exit;
+	}
+
+	skb_put_data(*skb, &header, NXP_NCI_FW_HDR_LEN);
+
+	r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len);
+	if (r != frame_len) {
+		nfc_err(&client->dev,
+			"Invalid frame length: %u (expected %zu)\n",
+			r, frame_len);
+		r = -EBADMSG;
+		goto fw_read_exit_free_skb;
+	}
+
+	return 0;
+
+fw_read_exit_free_skb:
+	kfree_skb(*skb);
+fw_read_exit:
+	return r;
+}
+
+static int nxp_nci_i2c_nci_read(struct nxp_nci_i2c_phy *phy,
+				struct sk_buff **skb)
+{
+	struct nci_ctrl_hdr header; /* May actually be a data header */
+	struct i2c_client *client = phy->i2c_dev;
+	int r;
+
+	r = i2c_master_recv(client, (u8 *) &header, NCI_CTRL_HDR_SIZE);
+	if (r < 0) {
+		goto nci_read_exit;
+	} else if (r != NCI_CTRL_HDR_SIZE) {
+		nfc_err(&client->dev, "Incorrect header length: %u\n", r);
+		r = -EBADMSG;
+		goto nci_read_exit;
+	}
+
+	*skb = alloc_skb(NCI_CTRL_HDR_SIZE + header.plen, GFP_KERNEL);
+	if (*skb == NULL) {
+		r = -ENOMEM;
+		goto nci_read_exit;
+	}
+
+	skb_put_data(*skb, (void *)&header, NCI_CTRL_HDR_SIZE);
+
+	r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen);
+	if (r != header.plen) {
+		nfc_err(&client->dev,
+			"Invalid frame payload length: %u (expected %u)\n",
+			r, header.plen);
+		r = -EBADMSG;
+		goto nci_read_exit_free_skb;
+	}
+
+	return 0;
+
+nci_read_exit_free_skb:
+	kfree_skb(*skb);
+nci_read_exit:
+	return r;
+}
+
+static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id)
+{
+	struct nxp_nci_i2c_phy *phy = phy_id;
+	struct i2c_client *client;
+	struct nxp_nci_info *info;
+
+	struct sk_buff *skb = NULL;
+	int r = 0;
+
+	if (!phy || !phy->ndev)
+		goto exit_irq_none;
+
+	client = phy->i2c_dev;
+
+	if (!client || irq != client->irq)
+		goto exit_irq_none;
+
+	info = nci_get_drvdata(phy->ndev);
+
+	if (!info)
+		goto exit_irq_none;
+
+	mutex_lock(&info->info_lock);
+
+	if (phy->hard_fault != 0)
+		goto exit_irq_handled;
+
+	switch (info->mode) {
+	case NXP_NCI_MODE_NCI:
+		r = nxp_nci_i2c_nci_read(phy, &skb);
+		break;
+	case NXP_NCI_MODE_FW:
+		r = nxp_nci_i2c_fw_read(phy, &skb);
+		break;
+	case NXP_NCI_MODE_COLD:
+		r = -EREMOTEIO;
+		break;
+	}
+
+	if (r == -EREMOTEIO) {
+		phy->hard_fault = r;
+		if (info->mode == NXP_NCI_MODE_FW)
+			nxp_nci_fw_recv_frame(phy->ndev, NULL);
+	}
+	if (r < 0) {
+		nfc_err(&client->dev, "Read failed with error %d\n", r);
+		goto exit_irq_handled;
+	}
+
+	switch (info->mode) {
+	case NXP_NCI_MODE_NCI:
+		nci_recv_frame(phy->ndev, skb);
+		break;
+	case NXP_NCI_MODE_FW:
+		nxp_nci_fw_recv_frame(phy->ndev, skb);
+		break;
+	case NXP_NCI_MODE_COLD:
+		break;
+	}
+
+exit_irq_handled:
+	mutex_unlock(&info->info_lock);
+	return IRQ_HANDLED;
+exit_irq_none:
+	WARN_ON_ONCE(1);
+	return IRQ_NONE;
+}
+
+static int nxp_nci_i2c_parse_devtree(struct i2c_client *client)
+{
+	struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client);
+	struct device_node *pp;
+	int r;
+
+	pp = client->dev.of_node;
+	if (!pp)
+		return -ENODEV;
+
+	r = of_get_named_gpio(pp, "enable-gpios", 0);
+	if (r == -EPROBE_DEFER)
+		r = of_get_named_gpio(pp, "enable-gpios", 0);
+	if (r < 0) {
+		nfc_err(&client->dev, "Failed to get EN gpio, error: %d\n", r);
+		return r;
+	}
+	phy->gpio_en = r;
+
+	r = of_get_named_gpio(pp, "firmware-gpios", 0);
+	if (r == -EPROBE_DEFER)
+		r = of_get_named_gpio(pp, "firmware-gpios", 0);
+	if (r < 0) {
+		nfc_err(&client->dev, "Failed to get FW gpio, error: %d\n", r);
+		return r;
+	}
+	phy->gpio_fw = r;
+
+	return 0;
+}
+
+static int nxp_nci_i2c_acpi_config(struct nxp_nci_i2c_phy *phy)
+{
+	struct i2c_client *client = phy->i2c_dev;
+	struct gpio_desc *gpiod_en, *gpiod_fw;
+
+	gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2, GPIOD_OUT_LOW);
+	gpiod_fw = devm_gpiod_get_index(&client->dev, NULL, 1, GPIOD_OUT_LOW);
+
+	if (IS_ERR(gpiod_en) || IS_ERR(gpiod_fw)) {
+		nfc_err(&client->dev, "No GPIOs\n");
+		return -EINVAL;
+	}
+
+	phy->gpio_en = desc_to_gpio(gpiod_en);
+	phy->gpio_fw = desc_to_gpio(gpiod_fw);
+
+	return 0;
+}
+
+static int nxp_nci_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct nxp_nci_i2c_phy *phy;
+	struct nxp_nci_nfc_platform_data *pdata;
+	int r;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
+		r = -ENODEV;
+		goto probe_exit;
+	}
+
+	phy = devm_kzalloc(&client->dev, sizeof(struct nxp_nci_i2c_phy),
+			   GFP_KERNEL);
+	if (!phy) {
+		r = -ENOMEM;
+		goto probe_exit;
+	}
+
+	phy->i2c_dev = client;
+	i2c_set_clientdata(client, phy);
+
+	pdata = client->dev.platform_data;
+
+	if (!pdata && client->dev.of_node) {
+		r = nxp_nci_i2c_parse_devtree(client);
+		if (r < 0) {
+			nfc_err(&client->dev, "Failed to get DT data\n");
+			goto probe_exit;
+		}
+	} else if (pdata) {
+		phy->gpio_en = pdata->gpio_en;
+		phy->gpio_fw = pdata->gpio_fw;
+	} else if (ACPI_HANDLE(&client->dev)) {
+		r = nxp_nci_i2c_acpi_config(phy);
+		if (r < 0)
+			goto probe_exit;
+		goto nci_probe;
+	} else {
+		nfc_err(&client->dev, "No platform data\n");
+		r = -EINVAL;
+		goto probe_exit;
+	}
+
+	r = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en,
+				  GPIOF_OUT_INIT_LOW, "nxp_nci_en");
+	if (r < 0)
+		goto probe_exit;
+
+	r = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw,
+				  GPIOF_OUT_INIT_LOW, "nxp_nci_fw");
+	if (r < 0)
+		goto probe_exit;
+
+nci_probe:
+	r = nxp_nci_probe(phy, &client->dev, &i2c_phy_ops,
+			  NXP_NCI_I2C_MAX_PAYLOAD, &phy->ndev);
+	if (r < 0)
+		goto probe_exit;
+
+	r = request_threaded_irq(client->irq, NULL,
+				 nxp_nci_i2c_irq_thread_fn,
+				 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				 NXP_NCI_I2C_DRIVER_NAME, phy);
+	if (r < 0)
+		nfc_err(&client->dev, "Unable to register IRQ handler\n");
+
+probe_exit:
+	return r;
+}
+
+static int nxp_nci_i2c_remove(struct i2c_client *client)
+{
+	struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client);
+
+	nxp_nci_remove(phy->ndev);
+	free_irq(client->irq, phy);
+
+	return 0;
+}
+
+static const struct i2c_device_id nxp_nci_i2c_id_table[] = {
+	{"nxp-nci_i2c", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, nxp_nci_i2c_id_table);
+
+static const struct of_device_id of_nxp_nci_i2c_match[] = {
+	{ .compatible = "nxp,nxp-nci-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_nxp_nci_i2c_match);
+
+#ifdef CONFIG_ACPI
+static struct acpi_device_id acpi_id[] = {
+	{ "NXP7471" },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, acpi_id);
+#endif
+
+static struct i2c_driver nxp_nci_i2c_driver = {
+	.driver = {
+		   .name = NXP_NCI_I2C_DRIVER_NAME,
+		   .acpi_match_table = ACPI_PTR(acpi_id),
+		   .of_match_table = of_match_ptr(of_nxp_nci_i2c_match),
+		  },
+	.probe = nxp_nci_i2c_probe,
+	.id_table = nxp_nci_i2c_id_table,
+	.remove = nxp_nci_i2c_remove,
+};
+
+module_i2c_driver(nxp_nci_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("I2C driver for NXP NCI NFC controllers");
+MODULE_AUTHOR("Clément Perrochaud <clement.perrochaud@nxp.com>");
+MODULE_AUTHOR("Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>");
diff --git a/drivers/nfc/nxp-nci/nxp-nci.h b/drivers/nfc/nxp-nci/nxp-nci.h
new file mode 100644
index 000000000..20408cbff
--- /dev/null
+++ b/drivers/nfc/nxp-nci/nxp-nci.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2014  NXP Semiconductors  All rights reserved.
+ *
+ * Authors: Clément Perrochaud <clement.perrochaud@nxp.com>
+ *
+ * Derived from PN544 device driver:
+ * Copyright (C) 2012  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __LOCAL_NXP_NCI_H_
+#define __LOCAL_NXP_NCI_H_
+
+#include <linux/completion.h>
+#include <linux/firmware.h>
+#include <linux/nfc.h>
+#include <linux/platform_data/nxp-nci.h>
+
+#include <net/nfc/nci_core.h>
+
+#define NXP_NCI_FW_HDR_LEN	2
+#define NXP_NCI_FW_CRC_LEN	2
+
+#define NXP_NCI_FW_FRAME_LEN_MASK	0x03FF
+
+enum nxp_nci_mode {
+	NXP_NCI_MODE_COLD,
+	NXP_NCI_MODE_NCI,
+	NXP_NCI_MODE_FW
+};
+
+struct nxp_nci_phy_ops {
+	int (*set_mode)(void *id, enum nxp_nci_mode mode);
+	int (*write)(void *id, struct sk_buff *skb);
+};
+
+struct nxp_nci_fw_info {
+	char name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
+	const struct firmware *fw;
+
+	size_t size;
+	size_t written;
+
+	const u8 *data;
+	size_t frame_size;
+
+	struct work_struct work;
+	struct completion cmd_completion;
+
+	int cmd_result;
+};
+
+struct nxp_nci_info {
+	struct nci_dev *ndev;
+	void *phy_id;
+	struct device *pdev;
+
+	enum nxp_nci_mode mode;
+
+	const struct nxp_nci_phy_ops *phy_ops;
+	unsigned int max_payload;
+
+	struct mutex info_lock;
+
+	struct nxp_nci_fw_info fw_info;
+};
+
+int nxp_nci_fw_download(struct nci_dev *ndev, const char *firmware_name);
+void nxp_nci_fw_work(struct work_struct *work);
+void nxp_nci_fw_recv_frame(struct nci_dev *ndev, struct sk_buff *skb);
+void nxp_nci_fw_work_complete(struct nxp_nci_info *info, int result);
+
+int nxp_nci_probe(void *phy_id, struct device *pdev,
+		  const struct nxp_nci_phy_ops *phy_ops,
+		  unsigned int max_payload,
+		  struct nci_dev **ndev);
+void nxp_nci_remove(struct nci_dev *ndev);
+
+#endif /* __LOCAL_NXP_NCI_H_ */
diff --git a/drivers/nfc/pn533/Kconfig b/drivers/nfc/pn533/Kconfig
new file mode 100644
index 000000000..d94122dd3
--- /dev/null
+++ b/drivers/nfc/pn533/Kconfig
@@ -0,0 +1,27 @@
+config NFC_PN533
+	tristate
+	help
+	  NXP PN533 core driver.
+	  This driver provides core functionality for NXP PN533 NFC devices.
+
+config NFC_PN533_USB
+	tristate "NFC PN533 device support (USB)"
+	depends on USB
+	select NFC_PN533
+	---help---
+	  This module adds support for the NXP pn533 USB interface.
+	  Select this if your platform is using the USB bus.
+
+	  If you choose to build a module, it'll be called pn533_usb.
+	  Say N if unsure.
+
+config NFC_PN533_I2C
+	tristate "NFC PN533 device support (I2C)"
+	depends on I2C
+	select NFC_PN533
+	---help---
+	  This module adds support for the NXP pn533 I2C interface.
+	  Select this if your platform is using the I2C bus.
+
+	  If you choose to build a module, it'll be called pn533_i2c.
+	  Say N if unsure.
diff --git a/drivers/nfc/pn533/Makefile b/drivers/nfc/pn533/Makefile
new file mode 100644
index 000000000..51d24c622
--- /dev/null
+++ b/drivers/nfc/pn533/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for PN533 NFC driver
+#
+pn533_usb-objs  = usb.o
+pn533_i2c-objs  = i2c.o
+
+obj-$(CONFIG_NFC_PN533)     += pn533.o
+obj-$(CONFIG_NFC_PN533_USB) += pn533_usb.o
+obj-$(CONFIG_NFC_PN533_I2C) += pn533_i2c.o
diff --git a/drivers/nfc/pn533/i2c.c b/drivers/nfc/pn533/i2c.c
new file mode 100644
index 000000000..4389eb4c8
--- /dev/null
+++ b/drivers/nfc/pn533/i2c.c
@@ -0,0 +1,289 @@
+/*
+ * Driver for NXP PN533 NFC Chip - I2C transport layer
+ *
+ * Copyright (C) 2011 Instituto Nokia de Tecnologia
+ * Copyright (C) 2012-2013 Tieto Poland
+ * Copyright (C) 2016 HALE electronic
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/nfc.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <net/nfc/nfc.h>
+#include "pn533.h"
+
+#define VERSION "0.1"
+
+#define PN533_I2C_DRIVER_NAME "pn533_i2c"
+
+struct pn533_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct pn533 *priv;
+
+	bool aborted;
+
+	int hard_fault;		/*
+				 * < 0 if hardware error occurred (e.g. i2c err)
+				 * and prevents normal operation.
+				 */
+};
+
+static int pn533_i2c_send_ack(struct pn533 *dev, gfp_t flags)
+{
+	struct pn533_i2c_phy *phy = dev->phy;
+	struct i2c_client *client = phy->i2c_dev;
+	static const u8 ack[6] = {0x00, 0x00, 0xff, 0x00, 0xff, 0x00};
+	/* spec 6.2.1.3:  Preamble, SoPC (2), ACK Code (2), Postamble */
+	int rc;
+
+	rc = i2c_master_send(client, ack, 6);
+
+	return rc;
+}
+
+static int pn533_i2c_send_frame(struct pn533 *dev,
+				struct sk_buff *out)
+{
+	struct pn533_i2c_phy *phy = dev->phy;
+	struct i2c_client *client = phy->i2c_dev;
+	int rc;
+
+	if (phy->hard_fault != 0)
+		return phy->hard_fault;
+
+	if (phy->priv == NULL)
+		phy->priv = dev;
+
+	phy->aborted = false;
+
+	print_hex_dump_debug("PN533_i2c TX: ", DUMP_PREFIX_NONE, 16, 1,
+			     out->data, out->len, false);
+
+	rc = i2c_master_send(client, out->data, out->len);
+
+	if (rc == -EREMOTEIO) { /* Retry, chip was in power down */
+		usleep_range(6000, 10000);
+		rc = i2c_master_send(client, out->data, out->len);
+	}
+
+	if (rc >= 0) {
+		if (rc != out->len)
+			rc = -EREMOTEIO;
+		else
+			rc = 0;
+	}
+
+	return rc;
+}
+
+static void pn533_i2c_abort_cmd(struct pn533 *dev, gfp_t flags)
+{
+	struct pn533_i2c_phy *phy = dev->phy;
+
+	phy->aborted = true;
+
+	/* An ack will cancel the last issued command */
+	pn533_i2c_send_ack(dev, flags);
+
+	/* schedule cmd_complete_work to finish current command execution */
+	pn533_recv_frame(phy->priv, NULL, -ENOENT);
+}
+
+static int pn533_i2c_read(struct pn533_i2c_phy *phy, struct sk_buff **skb)
+{
+	struct i2c_client *client = phy->i2c_dev;
+	int len = PN533_EXT_FRAME_HEADER_LEN +
+		  PN533_STD_FRAME_MAX_PAYLOAD_LEN +
+		  PN533_STD_FRAME_TAIL_LEN + 1;
+	int r;
+
+	*skb = alloc_skb(len, GFP_KERNEL);
+	if (*skb == NULL)
+		return -ENOMEM;
+
+	r = i2c_master_recv(client, skb_put(*skb, len), len);
+	if (r != len) {
+		nfc_err(&client->dev, "cannot read. r=%d len=%d\n", r, len);
+		kfree_skb(*skb);
+		return -EREMOTEIO;
+	}
+
+	if (!((*skb)->data[0] & 0x01)) {
+		nfc_err(&client->dev, "READY flag not set");
+		kfree_skb(*skb);
+		return -EBUSY;
+	}
+
+	/* remove READY byte */
+	skb_pull(*skb, 1);
+	/* trim to frame size */
+	skb_trim(*skb, phy->priv->ops->rx_frame_size((*skb)->data));
+
+	return 0;
+}
+
+static irqreturn_t pn533_i2c_irq_thread_fn(int irq, void *data)
+{
+	struct pn533_i2c_phy *phy = data;
+	struct i2c_client *client;
+	struct sk_buff *skb = NULL;
+	int r;
+
+	if (!phy || irq != phy->i2c_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	client = phy->i2c_dev;
+	dev_dbg(&client->dev, "IRQ\n");
+
+	if (phy->hard_fault != 0)
+		return IRQ_HANDLED;
+
+	r = pn533_i2c_read(phy, &skb);
+	if (r == -EREMOTEIO) {
+		phy->hard_fault = r;
+
+		pn533_recv_frame(phy->priv, NULL, -EREMOTEIO);
+
+		return IRQ_HANDLED;
+	} else if ((r == -ENOMEM) || (r == -EBADMSG) || (r == -EBUSY)) {
+		return IRQ_HANDLED;
+	}
+
+	if (!phy->aborted)
+		pn533_recv_frame(phy->priv, skb, 0);
+
+	return IRQ_HANDLED;
+}
+
+static struct pn533_phy_ops i2c_phy_ops = {
+	.send_frame = pn533_i2c_send_frame,
+	.send_ack = pn533_i2c_send_ack,
+	.abort_cmd = pn533_i2c_abort_cmd,
+};
+
+
+static int pn533_i2c_probe(struct i2c_client *client,
+			       const struct i2c_device_id *id)
+{
+	struct pn533_i2c_phy *phy;
+	struct pn533 *priv;
+	int r = 0;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+	dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(&client->dev, sizeof(struct pn533_i2c_phy),
+			   GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->i2c_dev = client;
+	i2c_set_clientdata(client, phy);
+
+	priv = pn533_register_device(PN533_DEVICE_PN532,
+				     PN533_NO_TYPE_B_PROTOCOLS,
+				     PN533_PROTO_REQ_ACK_RESP,
+				     phy, &i2c_phy_ops, NULL,
+				     &phy->i2c_dev->dev,
+				     &client->dev);
+
+	if (IS_ERR(priv)) {
+		r = PTR_ERR(priv);
+		return r;
+	}
+
+	phy->priv = priv;
+
+	r = request_threaded_irq(client->irq, NULL, pn533_i2c_irq_thread_fn,
+				IRQF_TRIGGER_FALLING |
+				IRQF_SHARED | IRQF_ONESHOT,
+				PN533_I2C_DRIVER_NAME, phy);
+	if (r < 0) {
+		nfc_err(&client->dev, "Unable to register IRQ handler\n");
+		goto irq_rqst_err;
+	}
+
+	r = pn533_finalize_setup(priv);
+	if (r)
+		goto fn_setup_err;
+
+	return 0;
+
+fn_setup_err:
+	free_irq(client->irq, phy);
+
+irq_rqst_err:
+	pn533_unregister_device(phy->priv);
+
+	return r;
+}
+
+static int pn533_i2c_remove(struct i2c_client *client)
+{
+	struct pn533_i2c_phy *phy = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	free_irq(client->irq, phy);
+
+	pn533_unregister_device(phy->priv);
+
+	return 0;
+}
+
+static const struct of_device_id of_pn533_i2c_match[] = {
+	{ .compatible = "nxp,pn533-i2c", },
+	{ .compatible = "nxp,pn532-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_pn533_i2c_match);
+
+static const struct i2c_device_id pn533_i2c_id_table[] = {
+	{ PN533_I2C_DRIVER_NAME, 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, pn533_i2c_id_table);
+
+static struct i2c_driver pn533_i2c_driver = {
+	.driver = {
+		   .name = PN533_I2C_DRIVER_NAME,
+		   .owner = THIS_MODULE,
+		   .of_match_table = of_match_ptr(of_pn533_i2c_match),
+		  },
+	.probe = pn533_i2c_probe,
+	.id_table = pn533_i2c_id_table,
+	.remove = pn533_i2c_remove,
+};
+
+module_i2c_driver(pn533_i2c_driver);
+
+MODULE_AUTHOR("Michael Thalmeier <michael.thalmeier@hale.at>");
+MODULE_DESCRIPTION("PN533 I2C driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/nfc/pn533/pn533.c b/drivers/nfc/pn533/pn533.c
new file mode 100644
index 000000000..79bf8e1bd
--- /dev/null
+++ b/drivers/nfc/pn533/pn533.c
@@ -0,0 +1,2703 @@
+/*
+ * Driver for NXP PN533 NFC Chip - core functions
+ *
+ * Copyright (C) 2011 Instituto Nokia de Tecnologia
+ * Copyright (C) 2012-2013 Tieto Poland
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/nfc.h>
+#include <linux/netdevice.h>
+#include <net/nfc/nfc.h>
+#include "pn533.h"
+
+#define VERSION "0.3"
+
+/* How much time we spend listening for initiators */
+#define PN533_LISTEN_TIME 2
+/* Delay between each poll frame (ms) */
+#define PN533_POLL_INTERVAL 10
+
+/* structs for pn533 commands */
+
+/* PN533_CMD_GET_FIRMWARE_VERSION */
+struct pn533_fw_version {
+	u8 ic;
+	u8 ver;
+	u8 rev;
+	u8 support;
+};
+
+/* PN533_CMD_RF_CONFIGURATION */
+#define PN533_CFGITEM_RF_FIELD    0x01
+#define PN533_CFGITEM_TIMING      0x02
+#define PN533_CFGITEM_MAX_RETRIES 0x05
+#define PN533_CFGITEM_PASORI      0x82
+
+#define PN533_CFGITEM_RF_FIELD_AUTO_RFCA 0x2
+#define PN533_CFGITEM_RF_FIELD_ON        0x1
+#define PN533_CFGITEM_RF_FIELD_OFF       0x0
+
+#define PN533_CONFIG_TIMING_102 0xb
+#define PN533_CONFIG_TIMING_204 0xc
+#define PN533_CONFIG_TIMING_409 0xd
+#define PN533_CONFIG_TIMING_819 0xe
+
+#define PN533_CONFIG_MAX_RETRIES_NO_RETRY 0x00
+#define PN533_CONFIG_MAX_RETRIES_ENDLESS 0xFF
+
+struct pn533_config_max_retries {
+	u8 mx_rty_atr;
+	u8 mx_rty_psl;
+	u8 mx_rty_passive_act;
+} __packed;
+
+struct pn533_config_timing {
+	u8 rfu;
+	u8 atr_res_timeout;
+	u8 dep_timeout;
+} __packed;
+
+/* PN533_CMD_IN_LIST_PASSIVE_TARGET */
+
+/* felica commands opcode */
+#define PN533_FELICA_OPC_SENSF_REQ 0
+#define PN533_FELICA_OPC_SENSF_RES 1
+/* felica SENSF_REQ parameters */
+#define PN533_FELICA_SENSF_SC_ALL 0xFFFF
+#define PN533_FELICA_SENSF_RC_NO_SYSTEM_CODE 0
+#define PN533_FELICA_SENSF_RC_SYSTEM_CODE 1
+#define PN533_FELICA_SENSF_RC_ADVANCED_PROTOCOL 2
+
+/* type B initiator_data values */
+#define PN533_TYPE_B_AFI_ALL_FAMILIES 0
+#define PN533_TYPE_B_POLL_METHOD_TIMESLOT 0
+#define PN533_TYPE_B_POLL_METHOD_PROBABILISTIC 1
+
+union pn533_cmd_poll_initdata {
+	struct {
+		u8 afi;
+		u8 polling_method;
+	} __packed type_b;
+	struct {
+		u8 opcode;
+		__be16 sc;
+		u8 rc;
+		u8 tsn;
+	} __packed felica;
+};
+
+struct pn533_poll_modulations {
+	struct {
+		u8 maxtg;
+		u8 brty;
+		union pn533_cmd_poll_initdata initiator_data;
+	} __packed data;
+	u8 len;
+};
+
+static const struct pn533_poll_modulations poll_mod[] = {
+	[PN533_POLL_MOD_106KBPS_A] = {
+		.data = {
+			.maxtg = 1,
+			.brty = 0,
+		},
+		.len = 2,
+	},
+	[PN533_POLL_MOD_212KBPS_FELICA] = {
+		.data = {
+			.maxtg = 1,
+			.brty = 1,
+			.initiator_data.felica = {
+				.opcode = PN533_FELICA_OPC_SENSF_REQ,
+				.sc = PN533_FELICA_SENSF_SC_ALL,
+				.rc = PN533_FELICA_SENSF_RC_SYSTEM_CODE,
+				.tsn = 0x03,
+			},
+		},
+		.len = 7,
+	},
+	[PN533_POLL_MOD_424KBPS_FELICA] = {
+		.data = {
+			.maxtg = 1,
+			.brty = 2,
+			.initiator_data.felica = {
+				.opcode = PN533_FELICA_OPC_SENSF_REQ,
+				.sc = PN533_FELICA_SENSF_SC_ALL,
+				.rc = PN533_FELICA_SENSF_RC_SYSTEM_CODE,
+				.tsn = 0x03,
+			},
+		 },
+		.len = 7,
+	},
+	[PN533_POLL_MOD_106KBPS_JEWEL] = {
+		.data = {
+			.maxtg = 1,
+			.brty = 4,
+		},
+		.len = 2,
+	},
+	[PN533_POLL_MOD_847KBPS_B] = {
+		.data = {
+			.maxtg = 1,
+			.brty = 8,
+			.initiator_data.type_b = {
+				.afi = PN533_TYPE_B_AFI_ALL_FAMILIES,
+				.polling_method =
+					PN533_TYPE_B_POLL_METHOD_TIMESLOT,
+			},
+		},
+		.len = 3,
+	},
+	[PN533_LISTEN_MOD] = {
+		.len = 0,
+	},
+};
+
+/* PN533_CMD_IN_ATR */
+
+struct pn533_cmd_activate_response {
+	u8 status;
+	u8 nfcid3t[10];
+	u8 didt;
+	u8 bst;
+	u8 brt;
+	u8 to;
+	u8 ppt;
+	/* optional */
+	u8 gt[];
+} __packed;
+
+struct pn533_cmd_jump_dep_response {
+	u8 status;
+	u8 tg;
+	u8 nfcid3t[10];
+	u8 didt;
+	u8 bst;
+	u8 brt;
+	u8 to;
+	u8 ppt;
+	/* optional */
+	u8 gt[];
+} __packed;
+
+
+/* PN533_TG_INIT_AS_TARGET */
+#define PN533_INIT_TARGET_PASSIVE 0x1
+#define PN533_INIT_TARGET_DEP 0x2
+
+#define PN533_INIT_TARGET_RESP_FRAME_MASK 0x3
+#define PN533_INIT_TARGET_RESP_ACTIVE     0x1
+#define PN533_INIT_TARGET_RESP_DEP        0x4
+
+/* The rule: value(high byte) + value(low byte) + checksum = 0 */
+static inline u8 pn533_ext_checksum(u16 value)
+{
+	return ~(u8)(((value & 0xFF00) >> 8) + (u8)(value & 0xFF)) + 1;
+}
+
+/* The rule: value + checksum = 0 */
+static inline u8 pn533_std_checksum(u8 value)
+{
+	return ~value + 1;
+}
+
+/* The rule: sum(data elements) + checksum = 0 */
+static u8 pn533_std_data_checksum(u8 *data, int datalen)
+{
+	u8 sum = 0;
+	int i;
+
+	for (i = 0; i < datalen; i++)
+		sum += data[i];
+
+	return pn533_std_checksum(sum);
+}
+
+static void pn533_std_tx_frame_init(void *_frame, u8 cmd_code)
+{
+	struct pn533_std_frame *frame = _frame;
+
+	frame->preamble = 0;
+	frame->start_frame = cpu_to_be16(PN533_STD_FRAME_SOF);
+	PN533_STD_FRAME_IDENTIFIER(frame) = PN533_STD_FRAME_DIR_OUT;
+	PN533_FRAME_CMD(frame) = cmd_code;
+	frame->datalen = 2;
+}
+
+static void pn533_std_tx_frame_finish(void *_frame)
+{
+	struct pn533_std_frame *frame = _frame;
+
+	frame->datalen_checksum = pn533_std_checksum(frame->datalen);
+
+	PN533_STD_FRAME_CHECKSUM(frame) =
+		pn533_std_data_checksum(frame->data, frame->datalen);
+
+	PN533_STD_FRAME_POSTAMBLE(frame) = 0;
+}
+
+static void pn533_std_tx_update_payload_len(void *_frame, int len)
+{
+	struct pn533_std_frame *frame = _frame;
+
+	frame->datalen += len;
+}
+
+static bool pn533_std_rx_frame_is_valid(void *_frame, struct pn533 *dev)
+{
+	u8 checksum;
+	struct pn533_std_frame *stdf = _frame;
+
+	if (stdf->start_frame != cpu_to_be16(PN533_STD_FRAME_SOF))
+		return false;
+
+	if (likely(!PN533_STD_IS_EXTENDED(stdf))) {
+		/* Standard frame code */
+		dev->ops->rx_header_len = PN533_STD_FRAME_HEADER_LEN;
+
+		checksum = pn533_std_checksum(stdf->datalen);
+		if (checksum != stdf->datalen_checksum)
+			return false;
+
+		checksum = pn533_std_data_checksum(stdf->data, stdf->datalen);
+		if (checksum != PN533_STD_FRAME_CHECKSUM(stdf))
+			return false;
+	} else {
+		/* Extended */
+		struct pn533_ext_frame *eif = _frame;
+
+		dev->ops->rx_header_len = PN533_EXT_FRAME_HEADER_LEN;
+
+		checksum = pn533_ext_checksum(be16_to_cpu(eif->datalen));
+		if (checksum != eif->datalen_checksum)
+			return false;
+
+		/* check data checksum */
+		checksum = pn533_std_data_checksum(eif->data,
+						   be16_to_cpu(eif->datalen));
+		if (checksum != PN533_EXT_FRAME_CHECKSUM(eif))
+			return false;
+	}
+
+	return true;
+}
+
+bool pn533_rx_frame_is_ack(void *_frame)
+{
+	struct pn533_std_frame *frame = _frame;
+
+	if (frame->start_frame != cpu_to_be16(PN533_STD_FRAME_SOF))
+		return false;
+
+	if (frame->datalen != 0 || frame->datalen_checksum != 0xFF)
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(pn533_rx_frame_is_ack);
+
+static inline int pn533_std_rx_frame_size(void *frame)
+{
+	struct pn533_std_frame *f = frame;
+
+	/* check for Extended Information frame */
+	if (PN533_STD_IS_EXTENDED(f)) {
+		struct pn533_ext_frame *eif = frame;
+
+		return sizeof(struct pn533_ext_frame)
+			+ be16_to_cpu(eif->datalen) + PN533_STD_FRAME_TAIL_LEN;
+	}
+
+	return sizeof(struct pn533_std_frame) + f->datalen +
+	       PN533_STD_FRAME_TAIL_LEN;
+}
+
+static u8 pn533_std_get_cmd_code(void *frame)
+{
+	struct pn533_std_frame *f = frame;
+	struct pn533_ext_frame *eif = frame;
+
+	if (PN533_STD_IS_EXTENDED(f))
+		return PN533_FRAME_CMD(eif);
+	else
+		return PN533_FRAME_CMD(f);
+}
+
+bool pn533_rx_frame_is_cmd_response(struct pn533 *dev, void *frame)
+{
+	return (dev->ops->get_cmd_code(frame) ==
+				PN533_CMD_RESPONSE(dev->cmd->code));
+}
+EXPORT_SYMBOL_GPL(pn533_rx_frame_is_cmd_response);
+
+
+static struct pn533_frame_ops pn533_std_frame_ops = {
+	.tx_frame_init = pn533_std_tx_frame_init,
+	.tx_frame_finish = pn533_std_tx_frame_finish,
+	.tx_update_payload_len = pn533_std_tx_update_payload_len,
+	.tx_header_len = PN533_STD_FRAME_HEADER_LEN,
+	.tx_tail_len = PN533_STD_FRAME_TAIL_LEN,
+
+	.rx_is_frame_valid = pn533_std_rx_frame_is_valid,
+	.rx_frame_size = pn533_std_rx_frame_size,
+	.rx_header_len = PN533_STD_FRAME_HEADER_LEN,
+	.rx_tail_len = PN533_STD_FRAME_TAIL_LEN,
+
+	.max_payload_len =  PN533_STD_FRAME_MAX_PAYLOAD_LEN,
+	.get_cmd_code = pn533_std_get_cmd_code,
+};
+
+static void pn533_build_cmd_frame(struct pn533 *dev, u8 cmd_code,
+				  struct sk_buff *skb)
+{
+	/* payload is already there, just update datalen */
+	int payload_len = skb->len;
+	struct pn533_frame_ops *ops = dev->ops;
+
+
+	skb_push(skb, ops->tx_header_len);
+	skb_put(skb, ops->tx_tail_len);
+
+	ops->tx_frame_init(skb->data, cmd_code);
+	ops->tx_update_payload_len(skb->data, payload_len);
+	ops->tx_frame_finish(skb->data);
+}
+
+static int pn533_send_async_complete(struct pn533 *dev)
+{
+	struct pn533_cmd *cmd = dev->cmd;
+	struct sk_buff *resp;
+	int status, rc = 0;
+
+	if (!cmd) {
+		dev_dbg(dev->dev, "%s: cmd not set\n", __func__);
+		goto done;
+	}
+
+	dev_kfree_skb(cmd->req);
+
+	status = cmd->status;
+	resp = cmd->resp;
+
+	if (status < 0) {
+		rc = cmd->complete_cb(dev, cmd->complete_cb_context,
+				      ERR_PTR(status));
+		dev_kfree_skb(resp);
+		goto done;
+	}
+
+	/* when no response is set we got interrupted */
+	if (!resp)
+		resp = ERR_PTR(-EINTR);
+
+	if (!IS_ERR(resp)) {
+		skb_pull(resp, dev->ops->rx_header_len);
+		skb_trim(resp, resp->len - dev->ops->rx_tail_len);
+	}
+
+	rc = cmd->complete_cb(dev, cmd->complete_cb_context, resp);
+
+done:
+	kfree(cmd);
+	dev->cmd = NULL;
+	return rc;
+}
+
+static int __pn533_send_async(struct pn533 *dev, u8 cmd_code,
+			      struct sk_buff *req,
+			      pn533_send_async_complete_t complete_cb,
+			      void *complete_cb_context)
+{
+	struct pn533_cmd *cmd;
+	int rc = 0;
+
+	dev_dbg(dev->dev, "Sending command 0x%x\n", cmd_code);
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->code = cmd_code;
+	cmd->req = req;
+	cmd->complete_cb = complete_cb;
+	cmd->complete_cb_context = complete_cb_context;
+
+	pn533_build_cmd_frame(dev, cmd_code, req);
+
+	mutex_lock(&dev->cmd_lock);
+
+	if (!dev->cmd_pending) {
+		dev->cmd = cmd;
+		rc = dev->phy_ops->send_frame(dev, req);
+		if (rc) {
+			dev->cmd = NULL;
+			goto error;
+		}
+
+		dev->cmd_pending = 1;
+		goto unlock;
+	}
+
+	dev_dbg(dev->dev, "%s Queueing command 0x%x\n",
+		__func__, cmd_code);
+
+	INIT_LIST_HEAD(&cmd->queue);
+	list_add_tail(&cmd->queue, &dev->cmd_queue);
+
+	goto unlock;
+
+error:
+	kfree(cmd);
+unlock:
+	mutex_unlock(&dev->cmd_lock);
+	return rc;
+}
+
+static int pn533_send_data_async(struct pn533 *dev, u8 cmd_code,
+				 struct sk_buff *req,
+				 pn533_send_async_complete_t complete_cb,
+				 void *complete_cb_context)
+{
+	int rc;
+
+	rc = __pn533_send_async(dev, cmd_code, req, complete_cb,
+				complete_cb_context);
+
+	return rc;
+}
+
+static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code,
+				struct sk_buff *req,
+				pn533_send_async_complete_t complete_cb,
+				void *complete_cb_context)
+{
+	int rc;
+
+	rc = __pn533_send_async(dev, cmd_code, req, complete_cb,
+				complete_cb_context);
+
+	return rc;
+}
+
+/*
+ * pn533_send_cmd_direct_async
+ *
+ * The function sends a piority cmd directly to the chip omitting the cmd
+ * queue. It's intended to be used by chaining mechanism of received responses
+ * where the host has to request every single chunk of data before scheduling
+ * next cmd from the queue.
+ */
+static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code,
+				       struct sk_buff *req,
+				       pn533_send_async_complete_t complete_cb,
+				       void *complete_cb_context)
+{
+	struct pn533_cmd *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->code = cmd_code;
+	cmd->req = req;
+	cmd->complete_cb = complete_cb;
+	cmd->complete_cb_context = complete_cb_context;
+
+	pn533_build_cmd_frame(dev, cmd_code, req);
+
+	dev->cmd = cmd;
+	rc = dev->phy_ops->send_frame(dev, req);
+	if (rc < 0) {
+		dev->cmd = NULL;
+		kfree(cmd);
+	}
+
+	return rc;
+}
+
+static void pn533_wq_cmd_complete(struct work_struct *work)
+{
+	struct pn533 *dev = container_of(work, struct pn533, cmd_complete_work);
+	int rc;
+
+	rc = pn533_send_async_complete(dev);
+	if (rc != -EINPROGRESS)
+		queue_work(dev->wq, &dev->cmd_work);
+}
+
+static void pn533_wq_cmd(struct work_struct *work)
+{
+	struct pn533 *dev = container_of(work, struct pn533, cmd_work);
+	struct pn533_cmd *cmd;
+	int rc;
+
+	mutex_lock(&dev->cmd_lock);
+
+	if (list_empty(&dev->cmd_queue)) {
+		dev->cmd_pending = 0;
+		mutex_unlock(&dev->cmd_lock);
+		return;
+	}
+
+	cmd = list_first_entry(&dev->cmd_queue, struct pn533_cmd, queue);
+
+	list_del(&cmd->queue);
+
+	mutex_unlock(&dev->cmd_lock);
+
+	dev->cmd = cmd;
+	rc = dev->phy_ops->send_frame(dev, cmd->req);
+	if (rc < 0) {
+		dev->cmd = NULL;
+		dev_kfree_skb(cmd->req);
+		kfree(cmd);
+		return;
+	}
+
+}
+
+struct pn533_sync_cmd_response {
+	struct sk_buff *resp;
+	struct completion done;
+};
+
+static int pn533_send_sync_complete(struct pn533 *dev, void *_arg,
+				    struct sk_buff *resp)
+{
+	struct pn533_sync_cmd_response *arg = _arg;
+
+	arg->resp = resp;
+	complete(&arg->done);
+
+	return 0;
+}
+
+/*  pn533_send_cmd_sync
+ *
+ *  Please note the req parameter is freed inside the function to
+ *  limit a number of return value interpretations by the caller.
+ *
+ *  1. negative in case of error during TX path -> req should be freed
+ *
+ *  2. negative in case of error during RX path -> req should not be freed
+ *     as it's been already freed at the beginning of RX path by
+ *     async_complete_cb.
+ *
+ *  3. valid pointer in case of succesfult RX path
+ *
+ *  A caller has to check a return value with IS_ERR macro. If the test pass,
+ *  the returned pointer is valid.
+ *
+ */
+static struct sk_buff *pn533_send_cmd_sync(struct pn533 *dev, u8 cmd_code,
+					       struct sk_buff *req)
+{
+	int rc;
+	struct pn533_sync_cmd_response arg;
+
+	init_completion(&arg.done);
+
+	rc = pn533_send_cmd_async(dev, cmd_code, req,
+				  pn533_send_sync_complete, &arg);
+	if (rc) {
+		dev_kfree_skb(req);
+		return ERR_PTR(rc);
+	}
+
+	wait_for_completion(&arg.done);
+
+	return arg.resp;
+}
+
+static struct sk_buff *pn533_alloc_skb(struct pn533 *dev, unsigned int size)
+{
+	struct sk_buff *skb;
+
+	skb = alloc_skb(dev->ops->tx_header_len +
+			size +
+			dev->ops->tx_tail_len, GFP_KERNEL);
+
+	if (skb)
+		skb_reserve(skb, dev->ops->tx_header_len);
+
+	return skb;
+}
+
+struct pn533_target_type_a {
+	__be16 sens_res;
+	u8 sel_res;
+	u8 nfcid_len;
+	u8 nfcid_data[];
+} __packed;
+
+
+#define PN533_TYPE_A_SENS_RES_NFCID1(x) ((u8)((be16_to_cpu(x) & 0x00C0) >> 6))
+#define PN533_TYPE_A_SENS_RES_SSD(x) ((u8)((be16_to_cpu(x) & 0x001F) >> 0))
+#define PN533_TYPE_A_SENS_RES_PLATCONF(x) ((u8)((be16_to_cpu(x) & 0x0F00) >> 8))
+
+#define PN533_TYPE_A_SENS_RES_SSD_JEWEL 0x00
+#define PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL 0x0C
+
+#define PN533_TYPE_A_SEL_PROT(x) (((x) & 0x60) >> 5)
+#define PN533_TYPE_A_SEL_CASCADE(x) (((x) & 0x04) >> 2)
+
+#define PN533_TYPE_A_SEL_PROT_MIFARE 0
+#define PN533_TYPE_A_SEL_PROT_ISO14443 1
+#define PN533_TYPE_A_SEL_PROT_DEP 2
+#define PN533_TYPE_A_SEL_PROT_ISO14443_DEP 3
+
+static bool pn533_target_type_a_is_valid(struct pn533_target_type_a *type_a,
+							int target_data_len)
+{
+	u8 ssd;
+	u8 platconf;
+
+	if (target_data_len < sizeof(struct pn533_target_type_a))
+		return false;
+
+	/*
+	 * The length check of nfcid[] and ats[] are not being performed because
+	 * the values are not being used
+	 */
+
+	/* Requirement 4.6.3.3 from NFC Forum Digital Spec */
+	ssd = PN533_TYPE_A_SENS_RES_SSD(type_a->sens_res);
+	platconf = PN533_TYPE_A_SENS_RES_PLATCONF(type_a->sens_res);
+
+	if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL &&
+	     platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) ||
+	    (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL &&
+	     platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL))
+		return false;
+
+	/* Requirements 4.8.2.1, 4.8.2.3, 4.8.2.5 and 4.8.2.7 from NFC Forum */
+	if (PN533_TYPE_A_SEL_CASCADE(type_a->sel_res) != 0)
+		return false;
+
+	if (type_a->nfcid_len > NFC_NFCID1_MAXSIZE)
+		return false;
+
+	return true;
+}
+
+static int pn533_target_found_type_a(struct nfc_target *nfc_tgt, u8 *tgt_data,
+							int tgt_data_len)
+{
+	struct pn533_target_type_a *tgt_type_a;
+
+	tgt_type_a = (struct pn533_target_type_a *)tgt_data;
+
+	if (!pn533_target_type_a_is_valid(tgt_type_a, tgt_data_len))
+		return -EPROTO;
+
+	switch (PN533_TYPE_A_SEL_PROT(tgt_type_a->sel_res)) {
+	case PN533_TYPE_A_SEL_PROT_MIFARE:
+		nfc_tgt->supported_protocols = NFC_PROTO_MIFARE_MASK;
+		break;
+	case PN533_TYPE_A_SEL_PROT_ISO14443:
+		nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_MASK;
+		break;
+	case PN533_TYPE_A_SEL_PROT_DEP:
+		nfc_tgt->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+		break;
+	case PN533_TYPE_A_SEL_PROT_ISO14443_DEP:
+		nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_MASK |
+							NFC_PROTO_NFC_DEP_MASK;
+		break;
+	}
+
+	nfc_tgt->sens_res = be16_to_cpu(tgt_type_a->sens_res);
+	nfc_tgt->sel_res = tgt_type_a->sel_res;
+	nfc_tgt->nfcid1_len = tgt_type_a->nfcid_len;
+	memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len);
+
+	return 0;
+}
+
+struct pn533_target_felica {
+	u8 pol_res;
+	u8 opcode;
+	u8 nfcid2[NFC_NFCID2_MAXSIZE];
+	u8 pad[8];
+	/* optional */
+	u8 syst_code[];
+} __packed;
+
+#define PN533_FELICA_SENSF_NFCID2_DEP_B1 0x01
+#define PN533_FELICA_SENSF_NFCID2_DEP_B2 0xFE
+
+static bool pn533_target_felica_is_valid(struct pn533_target_felica *felica,
+							int target_data_len)
+{
+	if (target_data_len < sizeof(struct pn533_target_felica))
+		return false;
+
+	if (felica->opcode != PN533_FELICA_OPC_SENSF_RES)
+		return false;
+
+	return true;
+}
+
+static int pn533_target_found_felica(struct nfc_target *nfc_tgt, u8 *tgt_data,
+							int tgt_data_len)
+{
+	struct pn533_target_felica *tgt_felica;
+
+	tgt_felica = (struct pn533_target_felica *)tgt_data;
+
+	if (!pn533_target_felica_is_valid(tgt_felica, tgt_data_len))
+		return -EPROTO;
+
+	if ((tgt_felica->nfcid2[0] == PN533_FELICA_SENSF_NFCID2_DEP_B1) &&
+	    (tgt_felica->nfcid2[1] == PN533_FELICA_SENSF_NFCID2_DEP_B2))
+		nfc_tgt->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+	else
+		nfc_tgt->supported_protocols = NFC_PROTO_FELICA_MASK;
+
+	memcpy(nfc_tgt->sensf_res, &tgt_felica->opcode, 9);
+	nfc_tgt->sensf_res_len = 9;
+
+	memcpy(nfc_tgt->nfcid2, tgt_felica->nfcid2, NFC_NFCID2_MAXSIZE);
+	nfc_tgt->nfcid2_len = NFC_NFCID2_MAXSIZE;
+
+	return 0;
+}
+
+struct pn533_target_jewel {
+	__be16 sens_res;
+	u8 jewelid[4];
+} __packed;
+
+static bool pn533_target_jewel_is_valid(struct pn533_target_jewel *jewel,
+							int target_data_len)
+{
+	u8 ssd;
+	u8 platconf;
+
+	if (target_data_len < sizeof(struct pn533_target_jewel))
+		return false;
+
+	/* Requirement 4.6.3.3 from NFC Forum Digital Spec */
+	ssd = PN533_TYPE_A_SENS_RES_SSD(jewel->sens_res);
+	platconf = PN533_TYPE_A_SENS_RES_PLATCONF(jewel->sens_res);
+
+	if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL &&
+	     platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) ||
+	    (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL &&
+	     platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL))
+		return false;
+
+	return true;
+}
+
+static int pn533_target_found_jewel(struct nfc_target *nfc_tgt, u8 *tgt_data,
+							int tgt_data_len)
+{
+	struct pn533_target_jewel *tgt_jewel;
+
+	tgt_jewel = (struct pn533_target_jewel *)tgt_data;
+
+	if (!pn533_target_jewel_is_valid(tgt_jewel, tgt_data_len))
+		return -EPROTO;
+
+	nfc_tgt->supported_protocols = NFC_PROTO_JEWEL_MASK;
+	nfc_tgt->sens_res = be16_to_cpu(tgt_jewel->sens_res);
+	nfc_tgt->nfcid1_len = 4;
+	memcpy(nfc_tgt->nfcid1, tgt_jewel->jewelid, nfc_tgt->nfcid1_len);
+
+	return 0;
+}
+
+struct pn533_type_b_prot_info {
+	u8 bitrate;
+	u8 fsci_type;
+	u8 fwi_adc_fo;
+} __packed;
+
+#define PN533_TYPE_B_PROT_FCSI(x) (((x) & 0xF0) >> 4)
+#define PN533_TYPE_B_PROT_TYPE(x) (((x) & 0x0F) >> 0)
+#define PN533_TYPE_B_PROT_TYPE_RFU_MASK 0x8
+
+struct pn533_type_b_sens_res {
+	u8 opcode;
+	u8 nfcid[4];
+	u8 appdata[4];
+	struct pn533_type_b_prot_info prot_info;
+} __packed;
+
+#define PN533_TYPE_B_OPC_SENSB_RES 0x50
+
+struct pn533_target_type_b {
+	struct pn533_type_b_sens_res sensb_res;
+	u8 attrib_res_len;
+	u8 attrib_res[];
+} __packed;
+
+static bool pn533_target_type_b_is_valid(struct pn533_target_type_b *type_b,
+							int target_data_len)
+{
+	if (target_data_len < sizeof(struct pn533_target_type_b))
+		return false;
+
+	if (type_b->sensb_res.opcode != PN533_TYPE_B_OPC_SENSB_RES)
+		return false;
+
+	if (PN533_TYPE_B_PROT_TYPE(type_b->sensb_res.prot_info.fsci_type) &
+						PN533_TYPE_B_PROT_TYPE_RFU_MASK)
+		return false;
+
+	return true;
+}
+
+static int pn533_target_found_type_b(struct nfc_target *nfc_tgt, u8 *tgt_data,
+							int tgt_data_len)
+{
+	struct pn533_target_type_b *tgt_type_b;
+
+	tgt_type_b = (struct pn533_target_type_b *)tgt_data;
+
+	if (!pn533_target_type_b_is_valid(tgt_type_b, tgt_data_len))
+		return -EPROTO;
+
+	nfc_tgt->supported_protocols = NFC_PROTO_ISO14443_B_MASK;
+
+	return 0;
+}
+
+static void pn533_poll_reset_mod_list(struct pn533 *dev);
+static int pn533_target_found(struct pn533 *dev, u8 tg, u8 *tgdata,
+			      int tgdata_len)
+{
+	struct nfc_target nfc_tgt;
+	int rc;
+
+	dev_dbg(dev->dev, "%s: modulation=%d\n",
+		__func__, dev->poll_mod_curr);
+
+	if (tg != 1)
+		return -EPROTO;
+
+	memset(&nfc_tgt, 0, sizeof(struct nfc_target));
+
+	switch (dev->poll_mod_curr) {
+	case PN533_POLL_MOD_106KBPS_A:
+		rc = pn533_target_found_type_a(&nfc_tgt, tgdata, tgdata_len);
+		break;
+	case PN533_POLL_MOD_212KBPS_FELICA:
+	case PN533_POLL_MOD_424KBPS_FELICA:
+		rc = pn533_target_found_felica(&nfc_tgt, tgdata, tgdata_len);
+		break;
+	case PN533_POLL_MOD_106KBPS_JEWEL:
+		rc = pn533_target_found_jewel(&nfc_tgt, tgdata, tgdata_len);
+		break;
+	case PN533_POLL_MOD_847KBPS_B:
+		rc = pn533_target_found_type_b(&nfc_tgt, tgdata, tgdata_len);
+		break;
+	default:
+		nfc_err(dev->dev,
+			"Unknown current poll modulation\n");
+		return -EPROTO;
+	}
+
+	if (rc)
+		return rc;
+
+	if (!(nfc_tgt.supported_protocols & dev->poll_protocols)) {
+		dev_dbg(dev->dev,
+			"The Tg found doesn't have the desired protocol\n");
+		return -EAGAIN;
+	}
+
+	dev_dbg(dev->dev,
+		"Target found - supported protocols: 0x%x\n",
+		nfc_tgt.supported_protocols);
+
+	dev->tgt_available_prots = nfc_tgt.supported_protocols;
+
+	pn533_poll_reset_mod_list(dev);
+	nfc_targets_found(dev->nfc_dev, &nfc_tgt, 1);
+
+	return 0;
+}
+
+static inline void pn533_poll_next_mod(struct pn533 *dev)
+{
+	dev->poll_mod_curr = (dev->poll_mod_curr + 1) % dev->poll_mod_count;
+}
+
+static void pn533_poll_reset_mod_list(struct pn533 *dev)
+{
+	dev->poll_mod_count = 0;
+}
+
+static void pn533_poll_add_mod(struct pn533 *dev, u8 mod_index)
+{
+	dev->poll_mod_active[dev->poll_mod_count] =
+		(struct pn533_poll_modulations *)&poll_mod[mod_index];
+	dev->poll_mod_count++;
+}
+
+static void pn533_poll_create_mod_list(struct pn533 *dev,
+				       u32 im_protocols, u32 tm_protocols)
+{
+	pn533_poll_reset_mod_list(dev);
+
+	if ((im_protocols & NFC_PROTO_MIFARE_MASK) ||
+	    (im_protocols & NFC_PROTO_ISO14443_MASK) ||
+	    (im_protocols & NFC_PROTO_NFC_DEP_MASK))
+		pn533_poll_add_mod(dev, PN533_POLL_MOD_106KBPS_A);
+
+	if (im_protocols & NFC_PROTO_FELICA_MASK ||
+	    im_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		pn533_poll_add_mod(dev, PN533_POLL_MOD_212KBPS_FELICA);
+		pn533_poll_add_mod(dev, PN533_POLL_MOD_424KBPS_FELICA);
+	}
+
+	if (im_protocols & NFC_PROTO_JEWEL_MASK)
+		pn533_poll_add_mod(dev, PN533_POLL_MOD_106KBPS_JEWEL);
+
+	if (im_protocols & NFC_PROTO_ISO14443_B_MASK)
+		pn533_poll_add_mod(dev, PN533_POLL_MOD_847KBPS_B);
+
+	if (tm_protocols)
+		pn533_poll_add_mod(dev, PN533_LISTEN_MOD);
+}
+
+static int pn533_start_poll_complete(struct pn533 *dev, struct sk_buff *resp)
+{
+	u8 nbtg, tg, *tgdata;
+	int rc, tgdata_len;
+
+	/* Toggle the DEP polling */
+	if (dev->poll_protocols & NFC_PROTO_NFC_DEP_MASK)
+		dev->poll_dep = 1;
+
+	nbtg = resp->data[0];
+	tg = resp->data[1];
+	tgdata = &resp->data[2];
+	tgdata_len = resp->len - 2;  /* nbtg + tg */
+
+	if (nbtg) {
+		rc = pn533_target_found(dev, tg, tgdata, tgdata_len);
+
+		/* We must stop the poll after a valid target found */
+		if (rc == 0)
+			return 0;
+	}
+
+	return -EAGAIN;
+}
+
+static struct sk_buff *pn533_alloc_poll_tg_frame(struct pn533 *dev)
+{
+	struct sk_buff *skb;
+	u8 *felica, *nfcid3;
+
+	u8 *gbytes = dev->gb;
+	size_t gbytes_len = dev->gb_len;
+
+	u8 felica_params[18] = {0x1, 0xfe, /* DEP */
+				0x0, 0x0, 0x0, 0x0, 0x0, 0x0, /* random */
+				0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+				0xff, 0xff}; /* System code */
+
+	u8 mifare_params[6] = {0x1, 0x1, /* SENS_RES */
+			       0x0, 0x0, 0x0,
+			       0x40}; /* SEL_RES for DEP */
+
+	unsigned int skb_len = 36 + /*
+				     * mode (1), mifare (6),
+				     * felica (18), nfcid3 (10), gb_len (1)
+				     */
+			       gbytes_len +
+			       1;  /* len Tk*/
+
+	skb = pn533_alloc_skb(dev, skb_len);
+	if (!skb)
+		return NULL;
+
+	/* DEP support only */
+	skb_put_u8(skb, PN533_INIT_TARGET_DEP);
+
+	/* MIFARE params */
+	skb_put_data(skb, mifare_params, 6);
+
+	/* Felica params */
+	felica = skb_put_data(skb, felica_params, 18);
+	get_random_bytes(felica + 2, 6);
+
+	/* NFCID3 */
+	nfcid3 = skb_put_zero(skb, 10);
+	memcpy(nfcid3, felica, 8);
+
+	/* General bytes */
+	skb_put_u8(skb, gbytes_len);
+
+	skb_put_data(skb, gbytes, gbytes_len);
+
+	/* Len Tk */
+	skb_put_u8(skb, 0);
+
+	return skb;
+}
+
+static void pn533_wq_tm_mi_recv(struct work_struct *work);
+static struct sk_buff *pn533_build_response(struct pn533 *dev);
+
+static int pn533_tm_get_data_complete(struct pn533 *dev, void *arg,
+				      struct sk_buff *resp)
+{
+	struct sk_buff *skb;
+	u8 status, ret, mi;
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	if (IS_ERR(resp)) {
+		skb_queue_purge(&dev->resp_q);
+		return PTR_ERR(resp);
+	}
+
+	status = resp->data[0];
+
+	ret = status & PN533_CMD_RET_MASK;
+	mi = status & PN533_CMD_MI_MASK;
+
+	skb_pull(resp, sizeof(status));
+
+	if (ret != PN533_CMD_RET_SUCCESS) {
+		rc = -EIO;
+		goto error;
+	}
+
+	skb_queue_tail(&dev->resp_q, resp);
+
+	if (mi) {
+		queue_work(dev->wq, &dev->mi_tm_rx_work);
+		return -EINPROGRESS;
+	}
+
+	skb = pn533_build_response(dev);
+	if (!skb) {
+		rc = -EIO;
+		goto error;
+	}
+
+	return nfc_tm_data_received(dev->nfc_dev, skb);
+
+error:
+	nfc_tm_deactivated(dev->nfc_dev);
+	dev->tgt_mode = 0;
+	skb_queue_purge(&dev->resp_q);
+	dev_kfree_skb(resp);
+
+	return rc;
+}
+
+static void pn533_wq_tm_mi_recv(struct work_struct *work)
+{
+	struct pn533 *dev = container_of(work, struct pn533, mi_tm_rx_work);
+	struct sk_buff *skb;
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	skb = pn533_alloc_skb(dev, 0);
+	if (!skb)
+		return;
+
+	rc = pn533_send_cmd_direct_async(dev,
+					PN533_CMD_TG_GET_DATA,
+					skb,
+					pn533_tm_get_data_complete,
+					NULL);
+
+	if (rc < 0)
+		dev_kfree_skb(skb);
+}
+
+static int pn533_tm_send_complete(struct pn533 *dev, void *arg,
+				  struct sk_buff *resp);
+static void pn533_wq_tm_mi_send(struct work_struct *work)
+{
+	struct pn533 *dev = container_of(work, struct pn533, mi_tm_tx_work);
+	struct sk_buff *skb;
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	/* Grab the first skb in the queue */
+	skb = skb_dequeue(&dev->fragment_skb);
+	if (skb == NULL) {	/* No more data */
+		/* Reset the queue for future use */
+		skb_queue_head_init(&dev->fragment_skb);
+		goto error;
+	}
+
+	/* last entry - remove MI bit */
+	if (skb_queue_len(&dev->fragment_skb) == 0) {
+		rc = pn533_send_cmd_direct_async(dev, PN533_CMD_TG_SET_DATA,
+					skb, pn533_tm_send_complete, NULL);
+	} else
+		rc = pn533_send_cmd_direct_async(dev,
+					PN533_CMD_TG_SET_META_DATA,
+					skb, pn533_tm_send_complete, NULL);
+
+	if (rc == 0) /* success */
+		return;
+
+	dev_err(dev->dev,
+		"Error %d when trying to perform set meta data_exchange", rc);
+
+	dev_kfree_skb(skb);
+
+error:
+	dev->phy_ops->send_ack(dev, GFP_KERNEL);
+	queue_work(dev->wq, &dev->cmd_work);
+}
+
+static void pn533_wq_tg_get_data(struct work_struct *work)
+{
+	struct pn533 *dev = container_of(work, struct pn533, tg_work);
+	struct sk_buff *skb;
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	skb = pn533_alloc_skb(dev, 0);
+	if (!skb)
+		return;
+
+	rc = pn533_send_data_async(dev, PN533_CMD_TG_GET_DATA, skb,
+				   pn533_tm_get_data_complete, NULL);
+
+	if (rc < 0)
+		dev_kfree_skb(skb);
+}
+
+#define ATR_REQ_GB_OFFSET 17
+static int pn533_init_target_complete(struct pn533 *dev, struct sk_buff *resp)
+{
+	u8 mode, *cmd, comm_mode = NFC_COMM_PASSIVE, *gb;
+	size_t gb_len;
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	if (resp->len < ATR_REQ_GB_OFFSET + 1)
+		return -EINVAL;
+
+	mode = resp->data[0];
+	cmd = &resp->data[1];
+
+	dev_dbg(dev->dev, "Target mode 0x%x len %d\n",
+		mode, resp->len);
+
+	if ((mode & PN533_INIT_TARGET_RESP_FRAME_MASK) ==
+	    PN533_INIT_TARGET_RESP_ACTIVE)
+		comm_mode = NFC_COMM_ACTIVE;
+
+	if ((mode & PN533_INIT_TARGET_RESP_DEP) == 0)  /* Only DEP supported */
+		return -EOPNOTSUPP;
+
+	gb = cmd + ATR_REQ_GB_OFFSET;
+	gb_len = resp->len - (ATR_REQ_GB_OFFSET + 1);
+
+	rc = nfc_tm_activated(dev->nfc_dev, NFC_PROTO_NFC_DEP_MASK,
+			      comm_mode, gb, gb_len);
+	if (rc < 0) {
+		nfc_err(dev->dev,
+			"Error when signaling target activation\n");
+		return rc;
+	}
+
+	dev->tgt_mode = 1;
+	queue_work(dev->wq, &dev->tg_work);
+
+	return 0;
+}
+
+static void pn533_listen_mode_timer(struct timer_list *t)
+{
+	struct pn533 *dev = from_timer(dev, t, listen_timer);
+
+	dev_dbg(dev->dev, "Listen mode timeout\n");
+
+	dev->cancel_listen = 1;
+
+	pn533_poll_next_mod(dev);
+
+	queue_delayed_work(dev->wq, &dev->poll_work,
+			   msecs_to_jiffies(PN533_POLL_INTERVAL));
+}
+
+static int pn533_rf_complete(struct pn533 *dev, void *arg,
+			     struct sk_buff *resp)
+{
+	int rc = 0;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	if (IS_ERR(resp)) {
+		rc = PTR_ERR(resp);
+
+		nfc_err(dev->dev, "RF setting error %d\n", rc);
+
+		return rc;
+	}
+
+	queue_delayed_work(dev->wq, &dev->poll_work,
+			   msecs_to_jiffies(PN533_POLL_INTERVAL));
+
+	dev_kfree_skb(resp);
+	return rc;
+}
+
+static void pn533_wq_rf(struct work_struct *work)
+{
+	struct pn533 *dev = container_of(work, struct pn533, rf_work);
+	struct sk_buff *skb;
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	skb = pn533_alloc_skb(dev, 2);
+	if (!skb)
+		return;
+
+	skb_put_u8(skb, PN533_CFGITEM_RF_FIELD);
+	skb_put_u8(skb, PN533_CFGITEM_RF_FIELD_AUTO_RFCA);
+
+	rc = pn533_send_cmd_async(dev, PN533_CMD_RF_CONFIGURATION, skb,
+				  pn533_rf_complete, NULL);
+	if (rc < 0) {
+		dev_kfree_skb(skb);
+		nfc_err(dev->dev, "RF setting error %d\n", rc);
+	}
+}
+
+static int pn533_poll_dep_complete(struct pn533 *dev, void *arg,
+				   struct sk_buff *resp)
+{
+	struct pn533_cmd_jump_dep_response *rsp;
+	struct nfc_target nfc_target;
+	u8 target_gt_len;
+	int rc;
+
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	rsp = (struct pn533_cmd_jump_dep_response *)resp->data;
+
+	rc = rsp->status & PN533_CMD_RET_MASK;
+	if (rc != PN533_CMD_RET_SUCCESS) {
+		/* Not target found, turn radio off */
+		queue_work(dev->wq, &dev->rf_work);
+
+		dev_kfree_skb(resp);
+		return 0;
+	}
+
+	dev_dbg(dev->dev, "Creating new target");
+
+	nfc_target.supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+	nfc_target.nfcid1_len = 10;
+	memcpy(nfc_target.nfcid1, rsp->nfcid3t, nfc_target.nfcid1_len);
+	rc = nfc_targets_found(dev->nfc_dev, &nfc_target, 1);
+	if (rc)
+		goto error;
+
+	dev->tgt_available_prots = 0;
+	dev->tgt_active_prot = NFC_PROTO_NFC_DEP;
+
+	/* ATR_RES general bytes are located at offset 17 */
+	target_gt_len = resp->len - 17;
+	rc = nfc_set_remote_general_bytes(dev->nfc_dev,
+					  rsp->gt, target_gt_len);
+	if (!rc) {
+		rc = nfc_dep_link_is_up(dev->nfc_dev,
+					dev->nfc_dev->targets[0].idx,
+					0, NFC_RF_INITIATOR);
+
+		if (!rc)
+			pn533_poll_reset_mod_list(dev);
+	}
+error:
+	dev_kfree_skb(resp);
+	return rc;
+}
+
+#define PASSIVE_DATA_LEN 5
+static int pn533_poll_dep(struct nfc_dev *nfc_dev)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+	struct sk_buff *skb;
+	int rc, skb_len;
+	u8 *next, nfcid3[NFC_NFCID3_MAXSIZE];
+	u8 passive_data[PASSIVE_DATA_LEN] = {0x00, 0xff, 0xff, 0x00, 0x3};
+
+	dev_dbg(dev->dev, "%s", __func__);
+
+	if (!dev->gb) {
+		dev->gb = nfc_get_local_general_bytes(nfc_dev, &dev->gb_len);
+
+		if (!dev->gb || !dev->gb_len) {
+			dev->poll_dep = 0;
+			queue_work(dev->wq, &dev->rf_work);
+		}
+	}
+
+	skb_len = 3 + dev->gb_len; /* ActPass + BR + Next */
+	skb_len += PASSIVE_DATA_LEN;
+
+	/* NFCID3 */
+	skb_len += NFC_NFCID3_MAXSIZE;
+	nfcid3[0] = 0x1;
+	nfcid3[1] = 0xfe;
+	get_random_bytes(nfcid3 + 2, 6);
+
+	skb = pn533_alloc_skb(dev, skb_len);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_u8(skb, 0x01);  /* Active */
+	skb_put_u8(skb, 0x02);  /* 424 kbps */
+
+	next = skb_put(skb, 1);  /* Next */
+	*next = 0;
+
+	/* Copy passive data */
+	skb_put_data(skb, passive_data, PASSIVE_DATA_LEN);
+	*next |= 1;
+
+	/* Copy NFCID3 (which is NFCID2 from SENSF_RES) */
+	skb_put_data(skb, nfcid3, NFC_NFCID3_MAXSIZE);
+	*next |= 2;
+
+	skb_put_data(skb, dev->gb, dev->gb_len);
+	*next |= 4; /* We have some Gi */
+
+	rc = pn533_send_cmd_async(dev, PN533_CMD_IN_JUMP_FOR_DEP, skb,
+				  pn533_poll_dep_complete, NULL);
+
+	if (rc < 0)
+		dev_kfree_skb(skb);
+
+	return rc;
+}
+
+static int pn533_poll_complete(struct pn533 *dev, void *arg,
+			       struct sk_buff *resp)
+{
+	struct pn533_poll_modulations *cur_mod;
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	if (IS_ERR(resp)) {
+		rc = PTR_ERR(resp);
+
+		nfc_err(dev->dev, "%s  Poll complete error %d\n",
+			__func__, rc);
+
+		if (rc == -ENOENT) {
+			if (dev->poll_mod_count != 0)
+				return rc;
+			goto stop_poll;
+		} else if (rc < 0) {
+			nfc_err(dev->dev,
+				"Error %d when running poll\n", rc);
+			goto stop_poll;
+		}
+	}
+
+	cur_mod = dev->poll_mod_active[dev->poll_mod_curr];
+
+	if (cur_mod->len == 0) { /* Target mode */
+		del_timer(&dev->listen_timer);
+		rc = pn533_init_target_complete(dev, resp);
+		goto done;
+	}
+
+	/* Initiator mode */
+	rc = pn533_start_poll_complete(dev, resp);
+	if (!rc)
+		goto done;
+
+	if (!dev->poll_mod_count) {
+		dev_dbg(dev->dev, "Polling has been stopped\n");
+		goto done;
+	}
+
+	pn533_poll_next_mod(dev);
+	/* Not target found, turn radio off */
+	queue_work(dev->wq, &dev->rf_work);
+
+done:
+	dev_kfree_skb(resp);
+	return rc;
+
+stop_poll:
+	nfc_err(dev->dev, "Polling operation has been stopped\n");
+
+	pn533_poll_reset_mod_list(dev);
+	dev->poll_protocols = 0;
+	return rc;
+}
+
+static struct sk_buff *pn533_alloc_poll_in_frame(struct pn533 *dev,
+					struct pn533_poll_modulations *mod)
+{
+	struct sk_buff *skb;
+
+	skb = pn533_alloc_skb(dev, mod->len);
+	if (!skb)
+		return NULL;
+
+	skb_put_data(skb, &mod->data, mod->len);
+
+	return skb;
+}
+
+static int pn533_send_poll_frame(struct pn533 *dev)
+{
+	struct pn533_poll_modulations *mod;
+	struct sk_buff *skb;
+	int rc;
+	u8 cmd_code;
+
+	mod = dev->poll_mod_active[dev->poll_mod_curr];
+
+	dev_dbg(dev->dev, "%s mod len %d\n",
+		__func__, mod->len);
+
+	if ((dev->poll_protocols & NFC_PROTO_NFC_DEP_MASK) && dev->poll_dep)  {
+		dev->poll_dep = 0;
+		return pn533_poll_dep(dev->nfc_dev);
+	}
+
+	if (mod->len == 0) {  /* Listen mode */
+		cmd_code = PN533_CMD_TG_INIT_AS_TARGET;
+		skb = pn533_alloc_poll_tg_frame(dev);
+	} else {  /* Polling mode */
+		cmd_code =  PN533_CMD_IN_LIST_PASSIVE_TARGET;
+		skb = pn533_alloc_poll_in_frame(dev, mod);
+	}
+
+	if (!skb) {
+		nfc_err(dev->dev, "Failed to allocate skb\n");
+		return -ENOMEM;
+	}
+
+	rc = pn533_send_cmd_async(dev, cmd_code, skb, pn533_poll_complete,
+				  NULL);
+	if (rc < 0) {
+		dev_kfree_skb(skb);
+		nfc_err(dev->dev, "Polling loop error %d\n", rc);
+	}
+
+	return rc;
+}
+
+static void pn533_wq_poll(struct work_struct *work)
+{
+	struct pn533 *dev = container_of(work, struct pn533, poll_work.work);
+	struct pn533_poll_modulations *cur_mod;
+	int rc;
+
+	cur_mod = dev->poll_mod_active[dev->poll_mod_curr];
+
+	dev_dbg(dev->dev,
+		"%s cancel_listen %d modulation len %d\n",
+		__func__, dev->cancel_listen, cur_mod->len);
+
+	if (dev->cancel_listen == 1) {
+		dev->cancel_listen = 0;
+		dev->phy_ops->abort_cmd(dev, GFP_ATOMIC);
+	}
+
+	rc = pn533_send_poll_frame(dev);
+	if (rc)
+		return;
+
+	if (cur_mod->len == 0 && dev->poll_mod_count > 1)
+		mod_timer(&dev->listen_timer, jiffies + PN533_LISTEN_TIME * HZ);
+}
+
+static int pn533_start_poll(struct nfc_dev *nfc_dev,
+			    u32 im_protocols, u32 tm_protocols)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+	struct pn533_poll_modulations *cur_mod;
+	u8 rand_mod;
+	int rc;
+
+	dev_dbg(dev->dev,
+		"%s: im protocols 0x%x tm protocols 0x%x\n",
+		__func__, im_protocols, tm_protocols);
+
+	if (dev->tgt_active_prot) {
+		nfc_err(dev->dev,
+			"Cannot poll with a target already activated\n");
+		return -EBUSY;
+	}
+
+	if (dev->tgt_mode) {
+		nfc_err(dev->dev,
+			"Cannot poll while already being activated\n");
+		return -EBUSY;
+	}
+
+	if (tm_protocols) {
+		dev->gb = nfc_get_local_general_bytes(nfc_dev, &dev->gb_len);
+		if (dev->gb == NULL)
+			tm_protocols = 0;
+	}
+
+	pn533_poll_create_mod_list(dev, im_protocols, tm_protocols);
+	dev->poll_protocols = im_protocols;
+	dev->listen_protocols = tm_protocols;
+
+	/* Do not always start polling from the same modulation */
+	get_random_bytes(&rand_mod, sizeof(rand_mod));
+	rand_mod %= dev->poll_mod_count;
+	dev->poll_mod_curr = rand_mod;
+
+	cur_mod = dev->poll_mod_active[dev->poll_mod_curr];
+
+	rc = pn533_send_poll_frame(dev);
+
+	/* Start listen timer */
+	if (!rc && cur_mod->len == 0 && dev->poll_mod_count > 1)
+		mod_timer(&dev->listen_timer, jiffies + PN533_LISTEN_TIME * HZ);
+
+	return rc;
+}
+
+static void pn533_stop_poll(struct nfc_dev *nfc_dev)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+
+	del_timer(&dev->listen_timer);
+
+	if (!dev->poll_mod_count) {
+		dev_dbg(dev->dev,
+			"Polling operation was not running\n");
+		return;
+	}
+
+	dev->phy_ops->abort_cmd(dev, GFP_KERNEL);
+	flush_delayed_work(&dev->poll_work);
+	pn533_poll_reset_mod_list(dev);
+}
+
+static int pn533_activate_target_nfcdep(struct pn533 *dev)
+{
+	struct pn533_cmd_activate_response *rsp;
+	u16 gt_len;
+	int rc;
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	skb = pn533_alloc_skb(dev, sizeof(u8) * 2); /*TG + Next*/
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_u8(skb, 1); /* TG */
+	skb_put_u8(skb, 0); /* Next */
+
+	resp = pn533_send_cmd_sync(dev, PN533_CMD_IN_ATR, skb);
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	rsp = (struct pn533_cmd_activate_response *)resp->data;
+	rc = rsp->status & PN533_CMD_RET_MASK;
+	if (rc != PN533_CMD_RET_SUCCESS) {
+		nfc_err(dev->dev,
+			"Target activation failed (error 0x%x)\n", rc);
+		dev_kfree_skb(resp);
+		return -EIO;
+	}
+
+	/* ATR_RES general bytes are located at offset 16 */
+	gt_len = resp->len - 16;
+	rc = nfc_set_remote_general_bytes(dev->nfc_dev, rsp->gt, gt_len);
+
+	dev_kfree_skb(resp);
+	return rc;
+}
+
+static int pn533_activate_target(struct nfc_dev *nfc_dev,
+				 struct nfc_target *target, u32 protocol)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+	int rc;
+
+	dev_dbg(dev->dev, "%s: protocol=%u\n", __func__, protocol);
+
+	if (dev->poll_mod_count) {
+		nfc_err(dev->dev,
+			"Cannot activate while polling\n");
+		return -EBUSY;
+	}
+
+	if (dev->tgt_active_prot) {
+		nfc_err(dev->dev,
+			"There is already an active target\n");
+		return -EBUSY;
+	}
+
+	if (!dev->tgt_available_prots) {
+		nfc_err(dev->dev,
+			"There is no available target to activate\n");
+		return -EINVAL;
+	}
+
+	if (!(dev->tgt_available_prots & (1 << protocol))) {
+		nfc_err(dev->dev,
+			"Target doesn't support requested proto %u\n",
+			protocol);
+		return -EINVAL;
+	}
+
+	if (protocol == NFC_PROTO_NFC_DEP) {
+		rc = pn533_activate_target_nfcdep(dev);
+		if (rc) {
+			nfc_err(dev->dev,
+				"Activating target with DEP failed %d\n", rc);
+			return rc;
+		}
+	}
+
+	dev->tgt_active_prot = protocol;
+	dev->tgt_available_prots = 0;
+
+	return 0;
+}
+
+static int pn533_deactivate_target_complete(struct pn533 *dev, void *arg,
+			     struct sk_buff *resp)
+{
+	int rc = 0;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	if (IS_ERR(resp)) {
+		rc = PTR_ERR(resp);
+
+		nfc_err(dev->dev, "Target release error %d\n", rc);
+
+		return rc;
+	}
+
+	rc = resp->data[0] & PN533_CMD_RET_MASK;
+	if (rc != PN533_CMD_RET_SUCCESS)
+		nfc_err(dev->dev,
+			"Error 0x%x when releasing the target\n", rc);
+
+	dev_kfree_skb(resp);
+	return rc;
+}
+
+static void pn533_deactivate_target(struct nfc_dev *nfc_dev,
+				    struct nfc_target *target, u8 mode)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+	struct sk_buff *skb;
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	if (!dev->tgt_active_prot) {
+		nfc_err(dev->dev, "There is no active target\n");
+		return;
+	}
+
+	dev->tgt_active_prot = 0;
+	skb_queue_purge(&dev->resp_q);
+
+	skb = pn533_alloc_skb(dev, sizeof(u8));
+	if (!skb)
+		return;
+
+	skb_put_u8(skb, 1); /* TG*/
+
+	rc = pn533_send_cmd_async(dev, PN533_CMD_IN_RELEASE, skb,
+				  pn533_deactivate_target_complete, NULL);
+	if (rc < 0) {
+		dev_kfree_skb(skb);
+		nfc_err(dev->dev, "Target release error %d\n", rc);
+	}
+}
+
+
+static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg,
+					 struct sk_buff *resp)
+{
+	struct pn533_cmd_jump_dep_response *rsp;
+	u8 target_gt_len;
+	int rc;
+	u8 active = *(u8 *)arg;
+
+	kfree(arg);
+
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	if (dev->tgt_available_prots &&
+	    !(dev->tgt_available_prots & (1 << NFC_PROTO_NFC_DEP))) {
+		nfc_err(dev->dev,
+			"The target does not support DEP\n");
+		rc =  -EINVAL;
+		goto error;
+	}
+
+	rsp = (struct pn533_cmd_jump_dep_response *)resp->data;
+
+	rc = rsp->status & PN533_CMD_RET_MASK;
+	if (rc != PN533_CMD_RET_SUCCESS) {
+		nfc_err(dev->dev,
+			"Bringing DEP link up failed (error 0x%x)\n", rc);
+		goto error;
+	}
+
+	if (!dev->tgt_available_prots) {
+		struct nfc_target nfc_target;
+
+		dev_dbg(dev->dev, "Creating new target\n");
+
+		nfc_target.supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+		nfc_target.nfcid1_len = 10;
+		memcpy(nfc_target.nfcid1, rsp->nfcid3t, nfc_target.nfcid1_len);
+		rc = nfc_targets_found(dev->nfc_dev, &nfc_target, 1);
+		if (rc)
+			goto error;
+
+		dev->tgt_available_prots = 0;
+	}
+
+	dev->tgt_active_prot = NFC_PROTO_NFC_DEP;
+
+	/* ATR_RES general bytes are located at offset 17 */
+	target_gt_len = resp->len - 17;
+	rc = nfc_set_remote_general_bytes(dev->nfc_dev,
+					  rsp->gt, target_gt_len);
+	if (rc == 0)
+		rc = nfc_dep_link_is_up(dev->nfc_dev,
+					dev->nfc_dev->targets[0].idx,
+					!active, NFC_RF_INITIATOR);
+
+error:
+	dev_kfree_skb(resp);
+	return rc;
+}
+
+static int pn533_rf_field(struct nfc_dev *nfc_dev, u8 rf);
+static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target,
+			     u8 comm_mode, u8 *gb, size_t gb_len)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+	struct sk_buff *skb;
+	int rc, skb_len;
+	u8 *next, *arg, nfcid3[NFC_NFCID3_MAXSIZE];
+	u8 passive_data[PASSIVE_DATA_LEN] = {0x00, 0xff, 0xff, 0x00, 0x3};
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	if (dev->poll_mod_count) {
+		nfc_err(dev->dev,
+			"Cannot bring the DEP link up while polling\n");
+		return -EBUSY;
+	}
+
+	if (dev->tgt_active_prot) {
+		nfc_err(dev->dev,
+			"There is already an active target\n");
+		return -EBUSY;
+	}
+
+	skb_len = 3 + gb_len; /* ActPass + BR + Next */
+	skb_len += PASSIVE_DATA_LEN;
+
+	/* NFCID3 */
+	skb_len += NFC_NFCID3_MAXSIZE;
+	if (target && !target->nfcid2_len) {
+		nfcid3[0] = 0x1;
+		nfcid3[1] = 0xfe;
+		get_random_bytes(nfcid3 + 2, 6);
+	}
+
+	skb = pn533_alloc_skb(dev, skb_len);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_u8(skb, !comm_mode);  /* ActPass */
+	skb_put_u8(skb, 0x02);  /* 424 kbps */
+
+	next = skb_put(skb, 1);  /* Next */
+	*next = 0;
+
+	/* Copy passive data */
+	skb_put_data(skb, passive_data, PASSIVE_DATA_LEN);
+	*next |= 1;
+
+	/* Copy NFCID3 (which is NFCID2 from SENSF_RES) */
+	if (target && target->nfcid2_len)
+		memcpy(skb_put(skb, NFC_NFCID3_MAXSIZE), target->nfcid2,
+		       target->nfcid2_len);
+	else
+		skb_put_data(skb, nfcid3, NFC_NFCID3_MAXSIZE);
+	*next |= 2;
+
+	if (gb != NULL && gb_len > 0) {
+		skb_put_data(skb, gb, gb_len);
+		*next |= 4; /* We have some Gi */
+	} else {
+		*next = 0;
+	}
+
+	arg = kmalloc(sizeof(*arg), GFP_KERNEL);
+	if (!arg) {
+		dev_kfree_skb(skb);
+		return -ENOMEM;
+	}
+
+	*arg = !comm_mode;
+
+	pn533_rf_field(dev->nfc_dev, 0);
+
+	rc = pn533_send_cmd_async(dev, PN533_CMD_IN_JUMP_FOR_DEP, skb,
+				  pn533_in_dep_link_up_complete, arg);
+
+	if (rc < 0) {
+		dev_kfree_skb(skb);
+		kfree(arg);
+	}
+
+	return rc;
+}
+
+static int pn533_dep_link_down(struct nfc_dev *nfc_dev)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	pn533_poll_reset_mod_list(dev);
+
+	if (dev->tgt_mode || dev->tgt_active_prot)
+		dev->phy_ops->abort_cmd(dev, GFP_KERNEL);
+
+	dev->tgt_active_prot = 0;
+	dev->tgt_mode = 0;
+
+	skb_queue_purge(&dev->resp_q);
+
+	return 0;
+}
+
+struct pn533_data_exchange_arg {
+	data_exchange_cb_t cb;
+	void *cb_context;
+};
+
+static struct sk_buff *pn533_build_response(struct pn533 *dev)
+{
+	struct sk_buff *skb, *tmp, *t;
+	unsigned int skb_len = 0, tmp_len = 0;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	if (skb_queue_empty(&dev->resp_q))
+		return NULL;
+
+	if (skb_queue_len(&dev->resp_q) == 1) {
+		skb = skb_dequeue(&dev->resp_q);
+		goto out;
+	}
+
+	skb_queue_walk_safe(&dev->resp_q, tmp, t)
+		skb_len += tmp->len;
+
+	dev_dbg(dev->dev, "%s total length %d\n",
+		__func__, skb_len);
+
+	skb = alloc_skb(skb_len, GFP_KERNEL);
+	if (skb == NULL)
+		goto out;
+
+	skb_put(skb, skb_len);
+
+	skb_queue_walk_safe(&dev->resp_q, tmp, t) {
+		memcpy(skb->data + tmp_len, tmp->data, tmp->len);
+		tmp_len += tmp->len;
+	}
+
+out:
+	skb_queue_purge(&dev->resp_q);
+
+	return skb;
+}
+
+static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg,
+					struct sk_buff *resp)
+{
+	struct pn533_data_exchange_arg *arg = _arg;
+	struct sk_buff *skb;
+	int rc = 0;
+	u8 status, ret, mi;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	if (IS_ERR(resp)) {
+		rc = PTR_ERR(resp);
+		goto _error;
+	}
+
+	status = resp->data[0];
+	ret = status & PN533_CMD_RET_MASK;
+	mi = status & PN533_CMD_MI_MASK;
+
+	skb_pull(resp, sizeof(status));
+
+	if (ret != PN533_CMD_RET_SUCCESS) {
+		nfc_err(dev->dev,
+			"Exchanging data failed (error 0x%x)\n", ret);
+		rc = -EIO;
+		goto error;
+	}
+
+	skb_queue_tail(&dev->resp_q, resp);
+
+	if (mi) {
+		dev->cmd_complete_mi_arg = arg;
+		queue_work(dev->wq, &dev->mi_rx_work);
+		return -EINPROGRESS;
+	}
+
+	/* Prepare for the next round */
+	if (skb_queue_len(&dev->fragment_skb) > 0) {
+		dev->cmd_complete_dep_arg = arg;
+		queue_work(dev->wq, &dev->mi_tx_work);
+
+		return -EINPROGRESS;
+	}
+
+	skb = pn533_build_response(dev);
+	if (!skb) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	arg->cb(arg->cb_context, skb, 0);
+	kfree(arg);
+	return 0;
+
+error:
+	dev_kfree_skb(resp);
+_error:
+	skb_queue_purge(&dev->resp_q);
+	arg->cb(arg->cb_context, NULL, rc);
+	kfree(arg);
+	return rc;
+}
+
+/*
+ * Receive an incoming pn533 frame. skb contains only header and payload.
+ * If skb == NULL, it is a notification that the link below is dead.
+ */
+void pn533_recv_frame(struct pn533 *dev, struct sk_buff *skb, int status)
+{
+	if (!dev->cmd)
+		goto sched_wq;
+
+	dev->cmd->status = status;
+
+	if (status != 0) {
+		dev_dbg(dev->dev, "%s: Error received: %d\n", __func__, status);
+		goto sched_wq;
+	}
+
+	if (skb == NULL) {
+		pr_err("NULL Frame -> link is dead\n");
+		goto sched_wq;
+	}
+
+	if (pn533_rx_frame_is_ack(skb->data)) {
+		dev_dbg(dev->dev, "%s: Received ACK frame\n", __func__);
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	print_hex_dump_debug("PN533 RX: ", DUMP_PREFIX_NONE, 16, 1, skb->data,
+			     dev->ops->rx_frame_size(skb->data), false);
+
+	if (!dev->ops->rx_is_frame_valid(skb->data, dev)) {
+		nfc_err(dev->dev, "Received an invalid frame\n");
+		dev->cmd->status = -EIO;
+	} else if (!pn533_rx_frame_is_cmd_response(dev, skb->data)) {
+		nfc_err(dev->dev, "It it not the response to the last command\n");
+		dev->cmd->status = -EIO;
+	}
+
+	dev->cmd->resp = skb;
+
+sched_wq:
+	queue_work(dev->wq, &dev->cmd_complete_work);
+}
+EXPORT_SYMBOL(pn533_recv_frame);
+
+/* Split the Tx skb into small chunks */
+static int pn533_fill_fragment_skbs(struct pn533 *dev, struct sk_buff *skb)
+{
+	struct sk_buff *frag;
+	int  frag_size;
+
+	do {
+		/* Remaining size */
+		if (skb->len > PN533_CMD_DATAFRAME_MAXLEN)
+			frag_size = PN533_CMD_DATAFRAME_MAXLEN;
+		else
+			frag_size = skb->len;
+
+		/* Allocate and reserve */
+		frag = pn533_alloc_skb(dev, frag_size);
+		if (!frag) {
+			skb_queue_purge(&dev->fragment_skb);
+			return -ENOMEM;
+		}
+
+		if (!dev->tgt_mode) {
+			/* Reserve the TG/MI byte */
+			skb_reserve(frag, 1);
+
+			/* MI + TG */
+			if (frag_size  == PN533_CMD_DATAFRAME_MAXLEN)
+				*(u8 *)skb_push(frag, sizeof(u8)) =
+						(PN533_CMD_MI_MASK | 1);
+			else
+				*(u8 *)skb_push(frag, sizeof(u8)) =  1; /* TG */
+		}
+
+		skb_put_data(frag, skb->data, frag_size);
+
+		/* Reduce the size of incoming buffer */
+		skb_pull(skb, frag_size);
+
+		/* Add this to skb_queue */
+		skb_queue_tail(&dev->fragment_skb, frag);
+
+	} while (skb->len > 0);
+
+	dev_kfree_skb(skb);
+
+	return skb_queue_len(&dev->fragment_skb);
+}
+
+static int pn533_transceive(struct nfc_dev *nfc_dev,
+			    struct nfc_target *target, struct sk_buff *skb,
+			    data_exchange_cb_t cb, void *cb_context)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+	struct pn533_data_exchange_arg *arg = NULL;
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	if (!dev->tgt_active_prot) {
+		nfc_err(dev->dev,
+			"Can't exchange data if there is no active target\n");
+		rc = -EINVAL;
+		goto error;
+	}
+
+	arg = kmalloc(sizeof(*arg), GFP_KERNEL);
+	if (!arg) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	arg->cb = cb;
+	arg->cb_context = cb_context;
+
+	switch (dev->device_type) {
+	case PN533_DEVICE_PASORI:
+		if (dev->tgt_active_prot == NFC_PROTO_FELICA) {
+			rc = pn533_send_data_async(dev, PN533_CMD_IN_COMM_THRU,
+						   skb,
+						   pn533_data_exchange_complete,
+						   arg);
+
+			break;
+		}
+	default:
+		/* jumbo frame ? */
+		if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) {
+			rc = pn533_fill_fragment_skbs(dev, skb);
+			if (rc < 0)
+				goto error;
+
+			skb = skb_dequeue(&dev->fragment_skb);
+			if (!skb) {
+				rc = -EIO;
+				goto error;
+			}
+		} else {
+			*(u8 *)skb_push(skb, sizeof(u8)) =  1; /* TG */
+		}
+
+		rc = pn533_send_data_async(dev, PN533_CMD_IN_DATA_EXCHANGE,
+					   skb, pn533_data_exchange_complete,
+					   arg);
+
+		break;
+	}
+
+	if (rc < 0) /* rc from send_async */
+		goto error;
+
+	return 0;
+
+error:
+	kfree(arg);
+	dev_kfree_skb(skb);
+	return rc;
+}
+
+static int pn533_tm_send_complete(struct pn533 *dev, void *arg,
+				  struct sk_buff *resp)
+{
+	u8 status;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	status = resp->data[0];
+
+	/* Prepare for the next round */
+	if (skb_queue_len(&dev->fragment_skb) > 0) {
+		queue_work(dev->wq, &dev->mi_tm_tx_work);
+		return -EINPROGRESS;
+	}
+	dev_kfree_skb(resp);
+
+	if (status != 0) {
+		nfc_tm_deactivated(dev->nfc_dev);
+
+		dev->tgt_mode = 0;
+
+		return 0;
+	}
+
+	queue_work(dev->wq, &dev->tg_work);
+
+	return 0;
+}
+
+static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	/* let's split in multiple chunks if size's too big */
+	if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) {
+		rc = pn533_fill_fragment_skbs(dev, skb);
+		if (rc < 0)
+			goto error;
+
+		/* get the first skb */
+		skb = skb_dequeue(&dev->fragment_skb);
+		if (!skb) {
+			rc = -EIO;
+			goto error;
+		}
+
+		rc = pn533_send_data_async(dev, PN533_CMD_TG_SET_META_DATA, skb,
+						pn533_tm_send_complete, NULL);
+	} else {
+		/* Send th skb */
+		rc = pn533_send_data_async(dev, PN533_CMD_TG_SET_DATA, skb,
+						pn533_tm_send_complete, NULL);
+	}
+
+error:
+	if (rc < 0) {
+		dev_kfree_skb(skb);
+		skb_queue_purge(&dev->fragment_skb);
+	}
+
+	return rc;
+}
+
+static void pn533_wq_mi_recv(struct work_struct *work)
+{
+	struct pn533 *dev = container_of(work, struct pn533, mi_rx_work);
+	struct sk_buff *skb;
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	skb = pn533_alloc_skb(dev, PN533_CMD_DATAEXCH_HEAD_LEN);
+	if (!skb)
+		goto error;
+
+	switch (dev->device_type) {
+	case PN533_DEVICE_PASORI:
+		if (dev->tgt_active_prot == NFC_PROTO_FELICA) {
+			rc = pn533_send_cmd_direct_async(dev,
+						PN533_CMD_IN_COMM_THRU,
+						skb,
+						pn533_data_exchange_complete,
+						 dev->cmd_complete_mi_arg);
+
+			break;
+		}
+	default:
+		skb_put_u8(skb, 1); /*TG*/
+
+		rc = pn533_send_cmd_direct_async(dev,
+						 PN533_CMD_IN_DATA_EXCHANGE,
+						 skb,
+						 pn533_data_exchange_complete,
+						 dev->cmd_complete_mi_arg);
+
+		break;
+	}
+
+	if (rc == 0) /* success */
+		return;
+
+	nfc_err(dev->dev,
+		"Error %d when trying to perform data_exchange\n", rc);
+
+	dev_kfree_skb(skb);
+	kfree(dev->cmd_complete_mi_arg);
+
+error:
+	dev->phy_ops->send_ack(dev, GFP_KERNEL);
+	queue_work(dev->wq, &dev->cmd_work);
+}
+
+static void pn533_wq_mi_send(struct work_struct *work)
+{
+	struct pn533 *dev = container_of(work, struct pn533, mi_tx_work);
+	struct sk_buff *skb;
+	int rc;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	/* Grab the first skb in the queue */
+	skb = skb_dequeue(&dev->fragment_skb);
+
+	if (skb == NULL) {	/* No more data */
+		/* Reset the queue for future use */
+		skb_queue_head_init(&dev->fragment_skb);
+		goto error;
+	}
+
+	switch (dev->device_type) {
+	case PN533_DEVICE_PASORI:
+		if (dev->tgt_active_prot != NFC_PROTO_FELICA) {
+			rc = -EIO;
+			break;
+		}
+
+		rc = pn533_send_cmd_direct_async(dev, PN533_CMD_IN_COMM_THRU,
+						 skb,
+						 pn533_data_exchange_complete,
+						 dev->cmd_complete_dep_arg);
+
+		break;
+
+	default:
+		/* Still some fragments? */
+		rc = pn533_send_cmd_direct_async(dev,
+						 PN533_CMD_IN_DATA_EXCHANGE,
+						 skb,
+						 pn533_data_exchange_complete,
+						 dev->cmd_complete_dep_arg);
+
+		break;
+	}
+
+	if (rc == 0) /* success */
+		return;
+
+	nfc_err(dev->dev,
+		"Error %d when trying to perform data_exchange\n", rc);
+
+	dev_kfree_skb(skb);
+	kfree(dev->cmd_complete_dep_arg);
+
+error:
+	dev->phy_ops->send_ack(dev, GFP_KERNEL);
+	queue_work(dev->wq, &dev->cmd_work);
+}
+
+static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata,
+								u8 cfgdata_len)
+{
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+	int skb_len;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	skb_len = sizeof(cfgitem) + cfgdata_len; /* cfgitem + cfgdata */
+
+	skb = pn533_alloc_skb(dev, skb_len);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_u8(skb, cfgitem);
+	skb_put_data(skb, cfgdata, cfgdata_len);
+
+	resp = pn533_send_cmd_sync(dev, PN533_CMD_RF_CONFIGURATION, skb);
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	dev_kfree_skb(resp);
+	return 0;
+}
+
+static int pn533_get_firmware_version(struct pn533 *dev,
+				      struct pn533_fw_version *fv)
+{
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+
+	skb = pn533_alloc_skb(dev, 0);
+	if (!skb)
+		return -ENOMEM;
+
+	resp = pn533_send_cmd_sync(dev, PN533_CMD_GET_FIRMWARE_VERSION, skb);
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	fv->ic = resp->data[0];
+	fv->ver = resp->data[1];
+	fv->rev = resp->data[2];
+	fv->support = resp->data[3];
+
+	dev_kfree_skb(resp);
+	return 0;
+}
+
+static int pn533_pasori_fw_reset(struct pn533 *dev)
+{
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	skb = pn533_alloc_skb(dev, sizeof(u8));
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_u8(skb, 0x1);
+
+	resp = pn533_send_cmd_sync(dev, 0x18, skb);
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	dev_kfree_skb(resp);
+
+	return 0;
+}
+
+static int pn533_rf_field(struct nfc_dev *nfc_dev, u8 rf)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+	u8 rf_field = !!rf;
+	int rc;
+
+	rf_field |= PN533_CFGITEM_RF_FIELD_AUTO_RFCA;
+
+	rc = pn533_set_configuration(dev, PN533_CFGITEM_RF_FIELD,
+				     (u8 *)&rf_field, 1);
+	if (rc) {
+		nfc_err(dev->dev, "Error on setting RF field\n");
+		return rc;
+	}
+
+	return rc;
+}
+
+static int pn532_sam_configuration(struct nfc_dev *nfc_dev)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+
+	skb = pn533_alloc_skb(dev, 1);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_u8(skb, 0x01);
+
+	resp = pn533_send_cmd_sync(dev, PN533_CMD_SAM_CONFIGURATION, skb);
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	dev_kfree_skb(resp);
+	return 0;
+}
+
+static int pn533_dev_up(struct nfc_dev *nfc_dev)
+{
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+
+	if (dev->device_type == PN533_DEVICE_PN532) {
+		int rc = pn532_sam_configuration(nfc_dev);
+
+		if (rc)
+			return rc;
+	}
+
+	return pn533_rf_field(nfc_dev, 1);
+}
+
+static int pn533_dev_down(struct nfc_dev *nfc_dev)
+{
+	return pn533_rf_field(nfc_dev, 0);
+}
+
+static struct nfc_ops pn533_nfc_ops = {
+	.dev_up = pn533_dev_up,
+	.dev_down = pn533_dev_down,
+	.dep_link_up = pn533_dep_link_up,
+	.dep_link_down = pn533_dep_link_down,
+	.start_poll = pn533_start_poll,
+	.stop_poll = pn533_stop_poll,
+	.activate_target = pn533_activate_target,
+	.deactivate_target = pn533_deactivate_target,
+	.im_transceive = pn533_transceive,
+	.tm_send = pn533_tm_send,
+};
+
+static int pn533_setup(struct pn533 *dev)
+{
+	struct pn533_config_max_retries max_retries;
+	struct pn533_config_timing timing;
+	u8 pasori_cfg[3] = {0x08, 0x01, 0x08};
+	int rc;
+
+	switch (dev->device_type) {
+	case PN533_DEVICE_STD:
+	case PN533_DEVICE_PASORI:
+	case PN533_DEVICE_ACR122U:
+	case PN533_DEVICE_PN532:
+		max_retries.mx_rty_atr = 0x2;
+		max_retries.mx_rty_psl = 0x1;
+		max_retries.mx_rty_passive_act =
+			PN533_CONFIG_MAX_RETRIES_NO_RETRY;
+
+		timing.rfu = PN533_CONFIG_TIMING_102;
+		timing.atr_res_timeout = PN533_CONFIG_TIMING_102;
+		timing.dep_timeout = PN533_CONFIG_TIMING_204;
+
+		break;
+
+	default:
+		nfc_err(dev->dev, "Unknown device type %d\n",
+			dev->device_type);
+		return -EINVAL;
+	}
+
+	rc = pn533_set_configuration(dev, PN533_CFGITEM_MAX_RETRIES,
+				     (u8 *)&max_retries, sizeof(max_retries));
+	if (rc) {
+		nfc_err(dev->dev,
+			"Error on setting MAX_RETRIES config\n");
+		return rc;
+	}
+
+
+	rc = pn533_set_configuration(dev, PN533_CFGITEM_TIMING,
+				     (u8 *)&timing, sizeof(timing));
+	if (rc) {
+		nfc_err(dev->dev, "Error on setting RF timings\n");
+		return rc;
+	}
+
+	switch (dev->device_type) {
+	case PN533_DEVICE_STD:
+	case PN533_DEVICE_PN532:
+		break;
+
+	case PN533_DEVICE_PASORI:
+		pn533_pasori_fw_reset(dev);
+
+		rc = pn533_set_configuration(dev, PN533_CFGITEM_PASORI,
+					     pasori_cfg, 3);
+		if (rc) {
+			nfc_err(dev->dev,
+				"Error while settings PASORI config\n");
+			return rc;
+		}
+
+		pn533_pasori_fw_reset(dev);
+
+		break;
+	}
+
+	return 0;
+}
+
+int pn533_finalize_setup(struct pn533 *dev)
+{
+
+	struct pn533_fw_version fw_ver;
+	int rc;
+
+	memset(&fw_ver, 0, sizeof(fw_ver));
+
+	rc = pn533_get_firmware_version(dev, &fw_ver);
+	if (rc) {
+		nfc_err(dev->dev, "Unable to get FW version\n");
+		return rc;
+	}
+
+	nfc_info(dev->dev, "NXP PN5%02X firmware ver %d.%d now attached\n",
+		fw_ver.ic, fw_ver.ver, fw_ver.rev);
+
+	rc = pn533_setup(dev);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pn533_finalize_setup);
+
+struct pn533 *pn533_register_device(u32 device_type,
+				u32 protocols,
+				enum pn533_protocol_type protocol_type,
+				void *phy,
+				struct pn533_phy_ops *phy_ops,
+				struct pn533_frame_ops *fops,
+				struct device *dev,
+				struct device *parent)
+{
+	struct pn533 *priv;
+	int rc = -ENOMEM;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return ERR_PTR(-ENOMEM);
+
+	priv->phy = phy;
+	priv->phy_ops = phy_ops;
+	priv->dev = dev;
+	if (fops != NULL)
+		priv->ops = fops;
+	else
+		priv->ops = &pn533_std_frame_ops;
+
+	priv->protocol_type = protocol_type;
+	priv->device_type = device_type;
+
+	mutex_init(&priv->cmd_lock);
+
+	INIT_WORK(&priv->cmd_work, pn533_wq_cmd);
+	INIT_WORK(&priv->cmd_complete_work, pn533_wq_cmd_complete);
+	INIT_WORK(&priv->mi_rx_work, pn533_wq_mi_recv);
+	INIT_WORK(&priv->mi_tx_work, pn533_wq_mi_send);
+	INIT_WORK(&priv->tg_work, pn533_wq_tg_get_data);
+	INIT_WORK(&priv->mi_tm_rx_work, pn533_wq_tm_mi_recv);
+	INIT_WORK(&priv->mi_tm_tx_work, pn533_wq_tm_mi_send);
+	INIT_DELAYED_WORK(&priv->poll_work, pn533_wq_poll);
+	INIT_WORK(&priv->rf_work, pn533_wq_rf);
+	priv->wq = alloc_ordered_workqueue("pn533", 0);
+	if (priv->wq == NULL)
+		goto error;
+
+	timer_setup(&priv->listen_timer, pn533_listen_mode_timer, 0);
+
+	skb_queue_head_init(&priv->resp_q);
+	skb_queue_head_init(&priv->fragment_skb);
+
+	INIT_LIST_HEAD(&priv->cmd_queue);
+
+	priv->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols,
+					   priv->ops->tx_header_len +
+					   PN533_CMD_DATAEXCH_HEAD_LEN,
+					   priv->ops->tx_tail_len);
+	if (!priv->nfc_dev) {
+		rc = -ENOMEM;
+		goto destroy_wq;
+	}
+
+	nfc_set_parent_dev(priv->nfc_dev, parent);
+	nfc_set_drvdata(priv->nfc_dev, priv);
+
+	rc = nfc_register_device(priv->nfc_dev);
+	if (rc)
+		goto free_nfc_dev;
+
+	return priv;
+
+free_nfc_dev:
+	nfc_free_device(priv->nfc_dev);
+
+destroy_wq:
+	destroy_workqueue(priv->wq);
+error:
+	kfree(priv);
+	return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(pn533_register_device);
+
+void pn533_unregister_device(struct pn533 *priv)
+{
+	struct pn533_cmd *cmd, *n;
+
+	nfc_unregister_device(priv->nfc_dev);
+	nfc_free_device(priv->nfc_dev);
+
+	flush_delayed_work(&priv->poll_work);
+	destroy_workqueue(priv->wq);
+
+	skb_queue_purge(&priv->resp_q);
+
+	del_timer(&priv->listen_timer);
+
+	list_for_each_entry_safe(cmd, n, &priv->cmd_queue, queue) {
+		list_del(&cmd->queue);
+		kfree(cmd);
+	}
+
+	kfree(priv);
+}
+EXPORT_SYMBOL_GPL(pn533_unregister_device);
+
+
+MODULE_AUTHOR("Lauro Ramos Venancio <lauro.venancio@openbossa.org>");
+MODULE_AUTHOR("Aloisio Almeida Jr <aloisio.almeida@openbossa.org>");
+MODULE_AUTHOR("Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>");
+MODULE_DESCRIPTION("PN533 driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/nfc/pn533/pn533.h b/drivers/nfc/pn533/pn533.h
new file mode 100644
index 000000000..88d569666
--- /dev/null
+++ b/drivers/nfc/pn533/pn533.h
@@ -0,0 +1,239 @@
+/*
+ * Driver for NXP PN533 NFC Chip
+ *
+ * Copyright (C) 2011 Instituto Nokia de Tecnologia
+ * Copyright (C) 2012-2013 Tieto Poland
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define PN533_DEVICE_STD     0x1
+#define PN533_DEVICE_PASORI  0x2
+#define PN533_DEVICE_ACR122U 0x3
+#define PN533_DEVICE_PN532   0x4
+
+#define PN533_ALL_PROTOCOLS (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK |\
+			     NFC_PROTO_FELICA_MASK | NFC_PROTO_ISO14443_MASK |\
+			     NFC_PROTO_NFC_DEP_MASK |\
+			     NFC_PROTO_ISO14443_B_MASK)
+
+#define PN533_NO_TYPE_B_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \
+				   NFC_PROTO_MIFARE_MASK | \
+				   NFC_PROTO_FELICA_MASK | \
+				   NFC_PROTO_ISO14443_MASK | \
+				   NFC_PROTO_NFC_DEP_MASK)
+
+/* Standard pn533 frame definitions (standard and extended)*/
+#define PN533_STD_FRAME_HEADER_LEN (sizeof(struct pn533_std_frame) \
+					+ 2) /* data[0] TFI, data[1] CC */
+#define PN533_STD_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/
+
+#define PN533_EXT_FRAME_HEADER_LEN (sizeof(struct pn533_ext_frame) \
+					+ 2) /* data[0] TFI, data[1] CC */
+
+#define PN533_CMD_DATAEXCH_HEAD_LEN 1
+#define PN533_CMD_DATAEXCH_DATA_MAXLEN	262
+#define PN533_CMD_DATAFRAME_MAXLEN	240	/* max data length (send) */
+
+/*
+ * Max extended frame payload len, excluding TFI and CC
+ * which are already in PN533_FRAME_HEADER_LEN.
+ */
+#define PN533_STD_FRAME_MAX_PAYLOAD_LEN 263
+
+
+/* Preamble (1), SoPC (2), ACK Code (2), Postamble (1) */
+#define PN533_STD_FRAME_ACK_SIZE 6
+#define PN533_STD_FRAME_CHECKSUM(f) (f->data[f->datalen])
+#define PN533_STD_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1])
+/* Half start code (3), LEN (4) should be 0xffff for extended frame */
+#define PN533_STD_IS_EXTENDED(hdr) ((hdr)->datalen == 0xFF \
+					&& (hdr)->datalen_checksum == 0xFF)
+#define PN533_EXT_FRAME_CHECKSUM(f) (f->data[be16_to_cpu(f->datalen)])
+
+/* start of frame */
+#define PN533_STD_FRAME_SOF 0x00FF
+
+/* standard frame identifier: in/out/error */
+#define PN533_STD_FRAME_IDENTIFIER(f) (f->data[0]) /* TFI */
+#define PN533_STD_FRAME_DIR_OUT 0xD4
+#define PN533_STD_FRAME_DIR_IN 0xD5
+
+/* PN533 Commands */
+#define PN533_FRAME_CMD(f) (f->data[1])
+
+#define PN533_CMD_GET_FIRMWARE_VERSION 0x02
+#define PN533_CMD_SAM_CONFIGURATION 0x14
+#define PN533_CMD_RF_CONFIGURATION 0x32
+#define PN533_CMD_IN_DATA_EXCHANGE 0x40
+#define PN533_CMD_IN_COMM_THRU     0x42
+#define PN533_CMD_IN_LIST_PASSIVE_TARGET 0x4A
+#define PN533_CMD_IN_ATR 0x50
+#define PN533_CMD_IN_RELEASE 0x52
+#define PN533_CMD_IN_JUMP_FOR_DEP 0x56
+
+#define PN533_CMD_TG_INIT_AS_TARGET 0x8c
+#define PN533_CMD_TG_GET_DATA 0x86
+#define PN533_CMD_TG_SET_DATA 0x8e
+#define PN533_CMD_TG_SET_META_DATA 0x94
+#define PN533_CMD_UNDEF 0xff
+
+#define PN533_CMD_RESPONSE(cmd) (cmd + 1)
+
+/* PN533 Return codes */
+#define PN533_CMD_RET_MASK 0x3F
+#define PN533_CMD_MI_MASK 0x40
+#define PN533_CMD_RET_SUCCESS 0x00
+
+
+enum  pn533_protocol_type {
+	PN533_PROTO_REQ_ACK_RESP = 0,
+	PN533_PROTO_REQ_RESP
+};
+
+/* Poll modulations */
+enum {
+	PN533_POLL_MOD_106KBPS_A,
+	PN533_POLL_MOD_212KBPS_FELICA,
+	PN533_POLL_MOD_424KBPS_FELICA,
+	PN533_POLL_MOD_106KBPS_JEWEL,
+	PN533_POLL_MOD_847KBPS_B,
+	PN533_LISTEN_MOD,
+
+	__PN533_POLL_MOD_AFTER_LAST,
+};
+#define PN533_POLL_MOD_MAX (__PN533_POLL_MOD_AFTER_LAST - 1)
+
+struct pn533_std_frame {
+	u8 preamble;
+	__be16 start_frame;
+	u8 datalen;
+	u8 datalen_checksum;
+	u8 data[];
+} __packed;
+
+struct pn533_ext_frame {	/* Extended Information frame */
+	u8 preamble;
+	__be16 start_frame;
+	__be16 eif_flag;	/* fixed to 0xFFFF */
+	__be16 datalen;
+	u8 datalen_checksum;
+	u8 data[];
+} __packed;
+
+struct pn533 {
+	struct nfc_dev *nfc_dev;
+	u32 device_type;
+	enum pn533_protocol_type protocol_type;
+
+	struct sk_buff_head resp_q;
+	struct sk_buff_head fragment_skb;
+
+	struct workqueue_struct	*wq;
+	struct work_struct cmd_work;
+	struct work_struct cmd_complete_work;
+	struct delayed_work poll_work;
+	struct work_struct mi_rx_work;
+	struct work_struct mi_tx_work;
+	struct work_struct mi_tm_rx_work;
+	struct work_struct mi_tm_tx_work;
+	struct work_struct tg_work;
+	struct work_struct rf_work;
+
+	struct list_head cmd_queue;
+	struct pn533_cmd *cmd;
+	u8 cmd_pending;
+	struct mutex cmd_lock;  /* protects cmd queue */
+
+	void *cmd_complete_mi_arg;
+	void *cmd_complete_dep_arg;
+
+	struct pn533_poll_modulations *poll_mod_active[PN533_POLL_MOD_MAX + 1];
+	u8 poll_mod_count;
+	u8 poll_mod_curr;
+	u8 poll_dep;
+	u32 poll_protocols;
+	u32 listen_protocols;
+	struct timer_list listen_timer;
+	int cancel_listen;
+
+	u8 *gb;
+	size_t gb_len;
+
+	u8 tgt_available_prots;
+	u8 tgt_active_prot;
+	u8 tgt_mode;
+
+	struct pn533_frame_ops *ops;
+
+	struct device *dev;
+	void *phy;
+	struct pn533_phy_ops *phy_ops;
+};
+
+typedef int (*pn533_send_async_complete_t) (struct pn533 *dev, void *arg,
+					struct sk_buff *resp);
+
+struct pn533_cmd {
+	struct list_head queue;
+	u8 code;
+	int status;
+	struct sk_buff *req;
+	struct sk_buff *resp;
+	pn533_send_async_complete_t  complete_cb;
+	void *complete_cb_context;
+};
+
+
+struct pn533_frame_ops {
+	void (*tx_frame_init)(void *frame, u8 cmd_code);
+	void (*tx_frame_finish)(void *frame);
+	void (*tx_update_payload_len)(void *frame, int len);
+	int tx_header_len;
+	int tx_tail_len;
+
+	bool (*rx_is_frame_valid)(void *frame, struct pn533 *dev);
+	bool (*rx_frame_is_ack)(void *frame);
+	int (*rx_frame_size)(void *frame);
+	int rx_header_len;
+	int rx_tail_len;
+
+	int max_payload_len;
+	u8 (*get_cmd_code)(void *frame);
+};
+
+
+struct pn533_phy_ops {
+	int (*send_frame)(struct pn533 *priv,
+			  struct sk_buff *out);
+	int (*send_ack)(struct pn533 *dev, gfp_t flags);
+	void (*abort_cmd)(struct pn533 *priv, gfp_t flags);
+};
+
+
+struct pn533 *pn533_register_device(u32 device_type,
+				u32 protocols,
+				enum pn533_protocol_type protocol_type,
+				void *phy,
+				struct pn533_phy_ops *phy_ops,
+				struct pn533_frame_ops *fops,
+				struct device *dev,
+				struct device *parent);
+
+int pn533_finalize_setup(struct pn533 *dev);
+void pn533_unregister_device(struct pn533 *priv);
+void pn533_recv_frame(struct pn533 *dev, struct sk_buff *skb, int status);
+
+bool pn533_rx_frame_is_cmd_response(struct pn533 *dev, void *frame);
+bool pn533_rx_frame_is_ack(void *_frame);
diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c
new file mode 100644
index 000000000..a2c9b3f3b
--- /dev/null
+++ b/drivers/nfc/pn533/usb.c
@@ -0,0 +1,623 @@
+/*
+ * Driver for NXP PN533 NFC Chip - USB transport layer
+ *
+ * Copyright (C) 2011 Instituto Nokia de Tecnologia
+ * Copyright (C) 2012-2013 Tieto Poland
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/nfc.h>
+#include <linux/netdevice.h>
+#include <net/nfc/nfc.h>
+#include "pn533.h"
+
+#define VERSION "0.1"
+
+#define PN533_VENDOR_ID 0x4CC
+#define PN533_PRODUCT_ID 0x2533
+
+#define SCM_VENDOR_ID 0x4E6
+#define SCL3711_PRODUCT_ID 0x5591
+
+#define SONY_VENDOR_ID         0x054c
+#define PASORI_PRODUCT_ID      0x02e1
+
+#define ACS_VENDOR_ID 0x072f
+#define ACR122U_PRODUCT_ID 0x2200
+
+static const struct usb_device_id pn533_usb_table[] = {
+	{ USB_DEVICE(PN533_VENDOR_ID, PN533_PRODUCT_ID),
+	  .driver_info = PN533_DEVICE_STD },
+	{ USB_DEVICE(SCM_VENDOR_ID, SCL3711_PRODUCT_ID),
+	  .driver_info = PN533_DEVICE_STD },
+	{ USB_DEVICE(SONY_VENDOR_ID, PASORI_PRODUCT_ID),
+	  .driver_info = PN533_DEVICE_PASORI },
+	{ USB_DEVICE(ACS_VENDOR_ID, ACR122U_PRODUCT_ID),
+	  .driver_info = PN533_DEVICE_ACR122U },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, pn533_usb_table);
+
+struct pn533_usb_phy {
+	struct usb_device *udev;
+	struct usb_interface *interface;
+
+	struct urb *out_urb;
+	struct urb *in_urb;
+
+	struct urb *ack_urb;
+	u8 *ack_buffer;
+
+	struct pn533 *priv;
+};
+
+static void pn533_recv_response(struct urb *urb)
+{
+	struct pn533_usb_phy *phy = urb->context;
+	struct sk_buff *skb = NULL;
+
+	if (!urb->status) {
+		skb = alloc_skb(urb->actual_length, GFP_ATOMIC);
+		if (!skb) {
+			nfc_err(&phy->udev->dev, "failed to alloc memory\n");
+		} else {
+			skb_put_data(skb, urb->transfer_buffer,
+				     urb->actual_length);
+		}
+	}
+
+	pn533_recv_frame(phy->priv, skb, urb->status);
+}
+
+static int pn533_submit_urb_for_response(struct pn533_usb_phy *phy, gfp_t flags)
+{
+	phy->in_urb->complete = pn533_recv_response;
+
+	return usb_submit_urb(phy->in_urb, flags);
+}
+
+static void pn533_recv_ack(struct urb *urb)
+{
+	struct pn533_usb_phy *phy = urb->context;
+	struct pn533 *priv = phy->priv;
+	struct pn533_cmd *cmd = priv->cmd;
+	struct pn533_std_frame *in_frame;
+	int rc;
+
+	cmd->status = urb->status;
+
+	switch (urb->status) {
+	case 0:
+		break; /* success */
+	case -ECONNRESET:
+	case -ENOENT:
+		dev_dbg(&phy->udev->dev,
+			"The urb has been stopped (status %d)\n",
+			urb->status);
+		goto sched_wq;
+	case -ESHUTDOWN:
+	default:
+		nfc_err(&phy->udev->dev,
+			"Urb failure (status %d)\n", urb->status);
+		goto sched_wq;
+	}
+
+	in_frame = phy->in_urb->transfer_buffer;
+
+	if (!pn533_rx_frame_is_ack(in_frame)) {
+		nfc_err(&phy->udev->dev, "Received an invalid ack\n");
+		cmd->status = -EIO;
+		goto sched_wq;
+	}
+
+	rc = pn533_submit_urb_for_response(phy, GFP_ATOMIC);
+	if (rc) {
+		nfc_err(&phy->udev->dev,
+			"usb_submit_urb failed with result %d\n", rc);
+		cmd->status = rc;
+		goto sched_wq;
+	}
+
+	return;
+
+sched_wq:
+	queue_work(priv->wq, &priv->cmd_complete_work);
+}
+
+static int pn533_submit_urb_for_ack(struct pn533_usb_phy *phy, gfp_t flags)
+{
+	phy->in_urb->complete = pn533_recv_ack;
+
+	return usb_submit_urb(phy->in_urb, flags);
+}
+
+static int pn533_usb_send_ack(struct pn533 *dev, gfp_t flags)
+{
+	struct pn533_usb_phy *phy = dev->phy;
+	static const u8 ack[6] = {0x00, 0x00, 0xff, 0x00, 0xff, 0x00};
+	/* spec 7.1.1.3:  Preamble, SoPC (2), ACK Code (2), Postamble */
+
+	if (!phy->ack_buffer) {
+		phy->ack_buffer = kmemdup(ack, sizeof(ack), flags);
+		if (!phy->ack_buffer)
+			return -ENOMEM;
+	}
+
+	phy->ack_urb->transfer_buffer = phy->ack_buffer;
+	phy->ack_urb->transfer_buffer_length = sizeof(ack);
+	return usb_submit_urb(phy->ack_urb, flags);
+}
+
+static int pn533_usb_send_frame(struct pn533 *dev,
+				struct sk_buff *out)
+{
+	struct pn533_usb_phy *phy = dev->phy;
+	int rc;
+
+	if (phy->priv == NULL)
+		phy->priv = dev;
+
+	phy->out_urb->transfer_buffer = out->data;
+	phy->out_urb->transfer_buffer_length = out->len;
+
+	print_hex_dump_debug("PN533 TX: ", DUMP_PREFIX_NONE, 16, 1,
+			     out->data, out->len, false);
+
+	rc = usb_submit_urb(phy->out_urb, GFP_KERNEL);
+	if (rc)
+		return rc;
+
+	if (dev->protocol_type == PN533_PROTO_REQ_RESP) {
+		/* request for response for sent packet directly */
+		rc = pn533_submit_urb_for_response(phy, GFP_KERNEL);
+		if (rc)
+			goto error;
+	} else if (dev->protocol_type == PN533_PROTO_REQ_ACK_RESP) {
+		/* request for ACK if that's the case */
+		rc = pn533_submit_urb_for_ack(phy, GFP_KERNEL);
+		if (rc)
+			goto error;
+	}
+
+	return 0;
+
+error:
+	usb_unlink_urb(phy->out_urb);
+	return rc;
+}
+
+static void pn533_usb_abort_cmd(struct pn533 *dev, gfp_t flags)
+{
+	struct pn533_usb_phy *phy = dev->phy;
+
+	/* ACR122U does not support any command which aborts last
+	 * issued command i.e. as ACK for standard PN533. Additionally,
+	 * it behaves stange, sending broken or incorrect responses,
+	 * when we cancel urb before the chip will send response.
+	 */
+	if (dev->device_type == PN533_DEVICE_ACR122U)
+		return;
+
+	/* An ack will cancel the last issued command */
+	pn533_usb_send_ack(dev, flags);
+
+	/* cancel the urb request */
+	usb_kill_urb(phy->in_urb);
+}
+
+/* ACR122 specific structs and fucntions */
+
+/* ACS ACR122 pn533 frame definitions */
+#define PN533_ACR122_TX_FRAME_HEADER_LEN (sizeof(struct pn533_acr122_tx_frame) \
+					  + 2)
+#define PN533_ACR122_TX_FRAME_TAIL_LEN 0
+#define PN533_ACR122_RX_FRAME_HEADER_LEN (sizeof(struct pn533_acr122_rx_frame) \
+					  + 2)
+#define PN533_ACR122_RX_FRAME_TAIL_LEN 2
+#define PN533_ACR122_FRAME_MAX_PAYLOAD_LEN PN533_STD_FRAME_MAX_PAYLOAD_LEN
+
+/* CCID messages types */
+#define PN533_ACR122_PC_TO_RDR_ICCPOWERON 0x62
+#define PN533_ACR122_PC_TO_RDR_ESCAPE 0x6B
+
+#define PN533_ACR122_RDR_TO_PC_ESCAPE 0x83
+
+
+struct pn533_acr122_ccid_hdr {
+	u8 type;
+	u32 datalen;
+	u8 slot;
+	u8 seq;
+
+	/*
+	 * 3 msg specific bytes or status, error and 1 specific
+	 * byte for reposnse msg
+	 */
+	u8 params[3];
+	u8 data[]; /* payload */
+} __packed;
+
+struct pn533_acr122_apdu_hdr {
+	u8 class;
+	u8 ins;
+	u8 p1;
+	u8 p2;
+} __packed;
+
+struct pn533_acr122_tx_frame {
+	struct pn533_acr122_ccid_hdr ccid;
+	struct pn533_acr122_apdu_hdr apdu;
+	u8 datalen;
+	u8 data[]; /* pn533 frame: TFI ... */
+} __packed;
+
+struct pn533_acr122_rx_frame {
+	struct pn533_acr122_ccid_hdr ccid;
+	u8 data[]; /* pn533 frame : TFI ... */
+} __packed;
+
+static void pn533_acr122_tx_frame_init(void *_frame, u8 cmd_code)
+{
+	struct pn533_acr122_tx_frame *frame = _frame;
+
+	frame->ccid.type = PN533_ACR122_PC_TO_RDR_ESCAPE;
+	/* sizeof(apdu_hdr) + sizeof(datalen) */
+	frame->ccid.datalen = sizeof(frame->apdu) + 1;
+	frame->ccid.slot = 0;
+	frame->ccid.seq = 0;
+	frame->ccid.params[0] = 0;
+	frame->ccid.params[1] = 0;
+	frame->ccid.params[2] = 0;
+
+	frame->data[0] = PN533_STD_FRAME_DIR_OUT;
+	frame->data[1] = cmd_code;
+	frame->datalen = 2;  /* data[0] + data[1] */
+
+	frame->apdu.class = 0xFF;
+	frame->apdu.ins = 0;
+	frame->apdu.p1 = 0;
+	frame->apdu.p2 = 0;
+}
+
+static void pn533_acr122_tx_frame_finish(void *_frame)
+{
+	struct pn533_acr122_tx_frame *frame = _frame;
+
+	frame->ccid.datalen += frame->datalen;
+}
+
+static void pn533_acr122_tx_update_payload_len(void *_frame, int len)
+{
+	struct pn533_acr122_tx_frame *frame = _frame;
+
+	frame->datalen += len;
+}
+
+static bool pn533_acr122_is_rx_frame_valid(void *_frame, struct pn533 *dev)
+{
+	struct pn533_acr122_rx_frame *frame = _frame;
+
+	if (frame->ccid.type != 0x83)
+		return false;
+
+	if (!frame->ccid.datalen)
+		return false;
+
+	if (frame->data[frame->ccid.datalen - 2] == 0x63)
+		return false;
+
+	return true;
+}
+
+static int pn533_acr122_rx_frame_size(void *frame)
+{
+	struct pn533_acr122_rx_frame *f = frame;
+
+	/* f->ccid.datalen already includes tail length */
+	return sizeof(struct pn533_acr122_rx_frame) + f->ccid.datalen;
+}
+
+static u8 pn533_acr122_get_cmd_code(void *frame)
+{
+	struct pn533_acr122_rx_frame *f = frame;
+
+	return PN533_FRAME_CMD(f);
+}
+
+static struct pn533_frame_ops pn533_acr122_frame_ops = {
+	.tx_frame_init = pn533_acr122_tx_frame_init,
+	.tx_frame_finish = pn533_acr122_tx_frame_finish,
+	.tx_update_payload_len = pn533_acr122_tx_update_payload_len,
+	.tx_header_len = PN533_ACR122_TX_FRAME_HEADER_LEN,
+	.tx_tail_len = PN533_ACR122_TX_FRAME_TAIL_LEN,
+
+	.rx_is_frame_valid = pn533_acr122_is_rx_frame_valid,
+	.rx_header_len = PN533_ACR122_RX_FRAME_HEADER_LEN,
+	.rx_tail_len = PN533_ACR122_RX_FRAME_TAIL_LEN,
+	.rx_frame_size = pn533_acr122_rx_frame_size,
+
+	.max_payload_len = PN533_ACR122_FRAME_MAX_PAYLOAD_LEN,
+	.get_cmd_code = pn533_acr122_get_cmd_code,
+};
+
+struct pn533_acr122_poweron_rdr_arg {
+	int rc;
+	struct completion done;
+};
+
+static void pn533_acr122_poweron_rdr_resp(struct urb *urb)
+{
+	struct pn533_acr122_poweron_rdr_arg *arg = urb->context;
+
+	dev_dbg(&urb->dev->dev, "%s\n", __func__);
+
+	print_hex_dump_debug("ACR122 RX: ", DUMP_PREFIX_NONE, 16, 1,
+		       urb->transfer_buffer, urb->transfer_buffer_length,
+		       false);
+
+	arg->rc = urb->status;
+	complete(&arg->done);
+}
+
+static int pn533_acr122_poweron_rdr(struct pn533_usb_phy *phy)
+{
+	/* Power on th reader (CCID cmd) */
+	u8 cmd[10] = {PN533_ACR122_PC_TO_RDR_ICCPOWERON,
+		      0, 0, 0, 0, 0, 0, 3, 0, 0};
+	char *buffer;
+	int transferred;
+	int rc;
+	void *cntx;
+	struct pn533_acr122_poweron_rdr_arg arg;
+
+	dev_dbg(&phy->udev->dev, "%s\n", __func__);
+
+	buffer = kmemdup(cmd, sizeof(cmd), GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	init_completion(&arg.done);
+	cntx = phy->in_urb->context;  /* backup context */
+
+	phy->in_urb->complete = pn533_acr122_poweron_rdr_resp;
+	phy->in_urb->context = &arg;
+
+	print_hex_dump_debug("ACR122 TX: ", DUMP_PREFIX_NONE, 16, 1,
+		       cmd, sizeof(cmd), false);
+
+	rc = usb_bulk_msg(phy->udev, phy->out_urb->pipe, buffer, sizeof(cmd),
+			  &transferred, 5000);
+	kfree(buffer);
+	if (rc || (transferred != sizeof(cmd))) {
+		nfc_err(&phy->udev->dev,
+			"Reader power on cmd error %d\n", rc);
+		return rc;
+	}
+
+	rc =  usb_submit_urb(phy->in_urb, GFP_KERNEL);
+	if (rc) {
+		nfc_err(&phy->udev->dev,
+			"Can't submit reader poweron cmd response %d\n", rc);
+		return rc;
+	}
+
+	wait_for_completion(&arg.done);
+	phy->in_urb->context = cntx; /* restore context */
+
+	return arg.rc;
+}
+
+static void pn533_send_complete(struct urb *urb)
+{
+	struct pn533_usb_phy *phy = urb->context;
+
+	switch (urb->status) {
+	case 0:
+		break; /* success */
+	case -ECONNRESET:
+	case -ENOENT:
+		dev_dbg(&phy->udev->dev,
+			"The urb has been stopped (status %d)\n",
+			urb->status);
+		break;
+	case -ESHUTDOWN:
+	default:
+		nfc_err(&phy->udev->dev,
+			"Urb failure (status %d)\n",
+			urb->status);
+	}
+}
+
+static struct pn533_phy_ops usb_phy_ops = {
+	.send_frame = pn533_usb_send_frame,
+	.send_ack = pn533_usb_send_ack,
+	.abort_cmd = pn533_usb_abort_cmd,
+};
+
+static int pn533_usb_probe(struct usb_interface *interface,
+			const struct usb_device_id *id)
+{
+	struct pn533 *priv;
+	struct pn533_usb_phy *phy;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	int in_endpoint = 0;
+	int out_endpoint = 0;
+	int rc = -ENOMEM;
+	int i;
+	u32 protocols;
+	enum pn533_protocol_type protocol_type = PN533_PROTO_REQ_ACK_RESP;
+	struct pn533_frame_ops *fops = NULL;
+	unsigned char *in_buf;
+	int in_buf_len = PN533_EXT_FRAME_HEADER_LEN +
+			 PN533_STD_FRAME_MAX_PAYLOAD_LEN +
+			 PN533_STD_FRAME_TAIL_LEN;
+
+	phy = devm_kzalloc(&interface->dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	in_buf = kzalloc(in_buf_len, GFP_KERNEL);
+	if (!in_buf)
+		return -ENOMEM;
+
+	phy->udev = usb_get_dev(interface_to_usbdev(interface));
+	phy->interface = interface;
+
+	iface_desc = interface->cur_altsetting;
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		endpoint = &iface_desc->endpoint[i].desc;
+
+		if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint))
+			in_endpoint = endpoint->bEndpointAddress;
+
+		if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint))
+			out_endpoint = endpoint->bEndpointAddress;
+	}
+
+	if (!in_endpoint || !out_endpoint) {
+		nfc_err(&interface->dev,
+			"Could not find bulk-in or bulk-out endpoint\n");
+		rc = -ENODEV;
+		goto error;
+	}
+
+	phy->in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	phy->out_urb = usb_alloc_urb(0, GFP_KERNEL);
+	phy->ack_urb = usb_alloc_urb(0, GFP_KERNEL);
+
+	if (!phy->in_urb || !phy->out_urb || !phy->ack_urb)
+		goto error;
+
+	usb_fill_bulk_urb(phy->in_urb, phy->udev,
+			  usb_rcvbulkpipe(phy->udev, in_endpoint),
+			  in_buf, in_buf_len, NULL, phy);
+
+	usb_fill_bulk_urb(phy->out_urb, phy->udev,
+			  usb_sndbulkpipe(phy->udev, out_endpoint),
+			  NULL, 0, pn533_send_complete, phy);
+	usb_fill_bulk_urb(phy->ack_urb, phy->udev,
+			  usb_sndbulkpipe(phy->udev, out_endpoint),
+			  NULL, 0, pn533_send_complete, phy);
+
+	switch (id->driver_info) {
+	case PN533_DEVICE_STD:
+		protocols = PN533_ALL_PROTOCOLS;
+		break;
+
+	case PN533_DEVICE_PASORI:
+		protocols = PN533_NO_TYPE_B_PROTOCOLS;
+		break;
+
+	case PN533_DEVICE_ACR122U:
+		protocols = PN533_NO_TYPE_B_PROTOCOLS;
+		fops = &pn533_acr122_frame_ops;
+		protocol_type = PN533_PROTO_REQ_RESP,
+
+		rc = pn533_acr122_poweron_rdr(phy);
+		if (rc < 0) {
+			nfc_err(&interface->dev,
+				"Couldn't poweron the reader (error %d)\n", rc);
+			goto error;
+		}
+		break;
+
+	default:
+		nfc_err(&interface->dev, "Unknown device type %lu\n",
+			id->driver_info);
+		rc = -EINVAL;
+		goto error;
+	}
+
+	priv = pn533_register_device(id->driver_info, protocols, protocol_type,
+					phy, &usb_phy_ops, fops,
+					&phy->udev->dev, &interface->dev);
+
+	if (IS_ERR(priv)) {
+		rc = PTR_ERR(priv);
+		goto error;
+	}
+
+	phy->priv = priv;
+
+	rc = pn533_finalize_setup(priv);
+	if (rc)
+		goto err_deregister;
+
+	usb_set_intfdata(interface, phy);
+
+	return 0;
+
+err_deregister:
+	pn533_unregister_device(phy->priv);
+error:
+	usb_kill_urb(phy->in_urb);
+	usb_kill_urb(phy->out_urb);
+	usb_kill_urb(phy->ack_urb);
+
+	usb_free_urb(phy->in_urb);
+	usb_free_urb(phy->out_urb);
+	usb_free_urb(phy->ack_urb);
+	usb_put_dev(phy->udev);
+	kfree(in_buf);
+	kfree(phy->ack_buffer);
+
+	return rc;
+}
+
+static void pn533_usb_disconnect(struct usb_interface *interface)
+{
+	struct pn533_usb_phy *phy = usb_get_intfdata(interface);
+
+	if (!phy)
+		return;
+
+	pn533_unregister_device(phy->priv);
+
+	usb_set_intfdata(interface, NULL);
+
+	usb_kill_urb(phy->in_urb);
+	usb_kill_urb(phy->out_urb);
+	usb_kill_urb(phy->ack_urb);
+
+	kfree(phy->in_urb->transfer_buffer);
+	usb_free_urb(phy->in_urb);
+	usb_free_urb(phy->out_urb);
+	usb_free_urb(phy->ack_urb);
+	kfree(phy->ack_buffer);
+
+	nfc_info(&interface->dev, "NXP PN533 NFC device disconnected\n");
+}
+
+static struct usb_driver pn533_usb_driver = {
+	.name =		"pn533_usb",
+	.probe =	pn533_usb_probe,
+	.disconnect =	pn533_usb_disconnect,
+	.id_table =	pn533_usb_table,
+};
+
+module_usb_driver(pn533_usb_driver);
+
+MODULE_AUTHOR("Lauro Ramos Venancio <lauro.venancio@openbossa.org>");
+MODULE_AUTHOR("Aloisio Almeida Jr <aloisio.almeida@openbossa.org>");
+MODULE_AUTHOR("Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>");
+MODULE_DESCRIPTION("PN533 USB driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/nfc/pn544/Kconfig b/drivers/nfc/pn544/Kconfig
new file mode 100644
index 000000000..2b8bde395
--- /dev/null
+++ b/drivers/nfc/pn544/Kconfig
@@ -0,0 +1,30 @@
+config NFC_PN544
+	tristate
+	select CRC_CCITT
+	---help---
+	  NXP PN544 core driver.
+	  This is a driver based on the HCI NFC kernel layers and
+	  will thus not work with NXP libnfc library.
+
+config NFC_PN544_I2C
+	tristate "NXP PN544 device support (I2C)"
+	depends on NFC_HCI && I2C && NFC_SHDLC
+	select NFC_PN544
+	---help---
+	  This module adds support for the NXP pn544 i2c interface.
+	  Select this if your platform is using the i2c bus.
+
+	  If you choose to build a module, it'll be called pn544_i2c.
+	  Say N if unsure.
+
+config NFC_PN544_MEI
+	tristate "NXP PN544 device support (MEI)"
+	depends on NFC_HCI && NFC_MEI_PHY
+	select NFC_PN544
+	---help---
+	  This module adds support for the mei interface of adapters using
+	  NXP pn544 chipsets.  Select this if your pn544 chipset
+	  is handled by Intel's Management Engine Interface on your platform.
+
+	  If you choose to build a module, it'll be called pn544_mei.
+	  Say N if unsure.
diff --git a/drivers/nfc/pn544/Makefile b/drivers/nfc/pn544/Makefile
new file mode 100644
index 000000000..29fb5a174
--- /dev/null
+++ b/drivers/nfc/pn544/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for PN544 HCI based NFC driver
+#
+
+pn544_i2c-objs  = i2c.o
+pn544_mei-objs  = mei.o
+
+obj-$(CONFIG_NFC_PN544)     += pn544.o
+obj-$(CONFIG_NFC_PN544_I2C) += pn544_i2c.o
+obj-$(CONFIG_NFC_PN544_MEI) += pn544_mei.o
diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c
new file mode 100644
index 000000000..dcef73eb4
--- /dev/null
+++ b/drivers/nfc/pn544/i2c.c
@@ -0,0 +1,985 @@
+/*
+ * I2C Link Layer for PN544 HCI based Driver
+ *
+ * Copyright (C) 2012  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/crc-ccitt.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/nfc.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+
+#include <asm/unaligned.h>
+
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+#include <net/nfc/nfc.h>
+
+#include "pn544.h"
+
+#define PN544_I2C_FRAME_HEADROOM 1
+#define PN544_I2C_FRAME_TAILROOM 2
+
+/* GPIO names */
+#define PN544_GPIO_NAME_IRQ "pn544_irq"
+#define PN544_GPIO_NAME_FW  "pn544_fw"
+#define PN544_GPIO_NAME_EN  "pn544_en"
+
+/* framing in HCI mode */
+#define PN544_HCI_I2C_LLC_LEN		1
+#define PN544_HCI_I2C_LLC_CRC		2
+#define PN544_HCI_I2C_LLC_LEN_CRC	(PN544_HCI_I2C_LLC_LEN + \
+					 PN544_HCI_I2C_LLC_CRC)
+#define PN544_HCI_I2C_LLC_MIN_SIZE	(1 + PN544_HCI_I2C_LLC_LEN_CRC)
+#define PN544_HCI_I2C_LLC_MAX_PAYLOAD	29
+#define PN544_HCI_I2C_LLC_MAX_SIZE	(PN544_HCI_I2C_LLC_LEN_CRC + 1 + \
+					 PN544_HCI_I2C_LLC_MAX_PAYLOAD)
+
+static const struct i2c_device_id pn544_hci_i2c_id_table[] = {
+	{"pn544", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table);
+
+static const struct acpi_device_id pn544_hci_i2c_acpi_match[] = {
+	{"NXP5440", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, pn544_hci_i2c_acpi_match);
+
+#define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c"
+
+/*
+ * Exposed through the 4 most significant bytes
+ * from the HCI SW_VERSION first byte, a.k.a.
+ * SW RomLib.
+ */
+#define PN544_HW_VARIANT_C2 0xa
+#define PN544_HW_VARIANT_C3 0xb
+
+#define PN544_FW_CMD_RESET 0x01
+#define PN544_FW_CMD_WRITE 0x08
+#define PN544_FW_CMD_CHECK 0x06
+#define PN544_FW_CMD_SECURE_WRITE 0x0C
+#define PN544_FW_CMD_SECURE_CHUNK_WRITE 0x0D
+
+struct pn544_i2c_fw_frame_write {
+	u8 cmd;
+	u16 be_length;
+	u8 be_dest_addr[3];
+	u16 be_datalen;
+	u8 data[];
+} __packed;
+
+struct pn544_i2c_fw_frame_check {
+	u8 cmd;
+	u16 be_length;
+	u8 be_start_addr[3];
+	u16 be_datalen;
+	u16 be_crc;
+} __packed;
+
+struct pn544_i2c_fw_frame_response {
+	u8 status;
+	u16 be_length;
+} __packed;
+
+struct pn544_i2c_fw_blob {
+	u32 be_size;
+	u32 be_destaddr;
+	u8 data[];
+};
+
+struct pn544_i2c_fw_secure_frame {
+	u8 cmd;
+	u16 be_datalen;
+	u8 data[];
+} __packed;
+
+struct pn544_i2c_fw_secure_blob {
+	u64 header;
+	u8 data[];
+};
+
+#define PN544_FW_CMD_RESULT_TIMEOUT 0x01
+#define PN544_FW_CMD_RESULT_BAD_CRC 0x02
+#define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08
+#define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B
+#define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11
+#define PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND 0x13
+#define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18
+#define PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR 0x19
+#define PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR 0x1D
+#define PN544_FW_CMD_RESULT_MEMORY_ERROR 0x20
+#define PN544_FW_CMD_RESULT_CHUNK_OK 0x21
+#define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74
+#define PN544_FW_CMD_RESULT_COMMAND_REJECTED 0xE0
+#define PN544_FW_CMD_RESULT_CHUNK_ERROR 0xE6
+
+#define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
+
+#define PN544_FW_WRITE_BUFFER_MAX_LEN 0x9f7
+#define PN544_FW_I2C_MAX_PAYLOAD PN544_HCI_I2C_LLC_MAX_SIZE
+#define PN544_FW_I2C_WRITE_FRAME_HEADER_LEN 8
+#define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\
+					 PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\
+					 PN544_FW_WRITE_BUFFER_MAX_LEN)
+#define PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN 3
+#define PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN (PN544_FW_I2C_MAX_PAYLOAD -\
+			PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN)
+#define PN544_FW_SECURE_FRAME_HEADER_LEN 3
+#define PN544_FW_SECURE_BLOB_HEADER_LEN 8
+
+#define FW_WORK_STATE_IDLE 1
+#define FW_WORK_STATE_START 2
+#define FW_WORK_STATE_WAIT_WRITE_ANSWER 3
+#define FW_WORK_STATE_WAIT_CHECK_ANSWER 4
+#define FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER 5
+
+struct pn544_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct nfc_hci_dev *hdev;
+
+	struct gpio_desc *gpiod_en;
+	struct gpio_desc *gpiod_fw;
+
+	unsigned int en_polarity;
+
+	u8 hw_variant;
+
+	struct work_struct fw_work;
+	int fw_work_state;
+	char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
+	const struct firmware *fw;
+	u32 fw_blob_dest_addr;
+	size_t fw_blob_size;
+	const u8 *fw_blob_data;
+	size_t fw_written;
+	size_t fw_size;
+
+	int fw_cmd_result;
+
+	int powered;
+	int run_mode;
+
+	int hard_fault;		/*
+				 * < 0 if hardware error occured (e.g. i2c err)
+				 * and prevents normal operation.
+				 */
+};
+
+#define I2C_DUMP_SKB(info, skb)					\
+do {								\
+	pr_debug("%s:\n", info);				\
+	print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET,	\
+		       16, 1, (skb)->data, (skb)->len, 0);	\
+} while (0)
+
+static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy)
+{
+	int polarity, retry, ret;
+	char rset_cmd[] = { 0x05, 0xF9, 0x04, 0x00, 0xC3, 0xE5 };
+	int count = sizeof(rset_cmd);
+
+	nfc_info(&phy->i2c_dev->dev, "Detecting nfc_en polarity\n");
+
+	/* Disable fw download */
+	gpiod_set_value_cansleep(phy->gpiod_fw, 0);
+
+	for (polarity = 0; polarity < 2; polarity++) {
+		phy->en_polarity = polarity;
+		retry = 3;
+		while (retry--) {
+			/* power off */
+			gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
+			usleep_range(10000, 15000);
+
+			/* power on */
+			gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
+			usleep_range(10000, 15000);
+
+			/* send reset */
+			dev_dbg(&phy->i2c_dev->dev, "Sending reset cmd\n");
+			ret = i2c_master_send(phy->i2c_dev, rset_cmd, count);
+			if (ret == count) {
+				nfc_info(&phy->i2c_dev->dev,
+					 "nfc_en polarity : active %s\n",
+					 (polarity == 0 ? "low" : "high"));
+				goto out;
+			}
+		}
+	}
+
+	nfc_err(&phy->i2c_dev->dev,
+		"Could not detect nfc_en polarity, fallback to active high\n");
+
+out:
+	gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
+	usleep_range(10000, 15000);
+}
+
+static void pn544_hci_i2c_enable_mode(struct pn544_i2c_phy *phy, int run_mode)
+{
+	gpiod_set_value_cansleep(phy->gpiod_fw, run_mode == PN544_FW_MODE ? 1 : 0);
+	gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
+	usleep_range(10000, 15000);
+
+	phy->run_mode = run_mode;
+}
+
+static int pn544_hci_i2c_enable(void *phy_id)
+{
+	struct pn544_i2c_phy *phy = phy_id;
+
+	pr_info("%s\n", __func__);
+
+	pn544_hci_i2c_enable_mode(phy, PN544_HCI_MODE);
+
+	phy->powered = 1;
+
+	return 0;
+}
+
+static void pn544_hci_i2c_disable(void *phy_id)
+{
+	struct pn544_i2c_phy *phy = phy_id;
+
+	gpiod_set_value_cansleep(phy->gpiod_fw, 0);
+	gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
+	usleep_range(10000, 15000);
+
+	gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
+	usleep_range(10000, 15000);
+
+	gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
+	usleep_range(10000, 15000);
+
+	phy->powered = 0;
+}
+
+static void pn544_hci_i2c_add_len_crc(struct sk_buff *skb)
+{
+	u16 crc;
+	int len;
+
+	len = skb->len + 2;
+	*(u8 *)skb_push(skb, 1) = len;
+
+	crc = crc_ccitt(0xffff, skb->data, skb->len);
+	crc = ~crc;
+	skb_put_u8(skb, crc & 0xff);
+	skb_put_u8(skb, crc >> 8);
+}
+
+static void pn544_hci_i2c_remove_len_crc(struct sk_buff *skb)
+{
+	skb_pull(skb, PN544_I2C_FRAME_HEADROOM);
+	skb_trim(skb, PN544_I2C_FRAME_TAILROOM);
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int pn544_hci_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+	int r;
+	struct pn544_i2c_phy *phy = phy_id;
+	struct i2c_client *client = phy->i2c_dev;
+
+	if (phy->hard_fault != 0)
+		return phy->hard_fault;
+
+	usleep_range(3000, 6000);
+
+	pn544_hci_i2c_add_len_crc(skb);
+
+	I2C_DUMP_SKB("i2c frame written", skb);
+
+	r = i2c_master_send(client, skb->data, skb->len);
+
+	if (r == -EREMOTEIO) {	/* Retry, chip was in standby */
+		usleep_range(6000, 10000);
+		r = i2c_master_send(client, skb->data, skb->len);
+	}
+
+	if (r >= 0) {
+		if (r != skb->len)
+			r = -EREMOTEIO;
+		else
+			r = 0;
+	}
+
+	pn544_hci_i2c_remove_len_crc(skb);
+
+	return r;
+}
+
+static int check_crc(u8 *buf, int buflen)
+{
+	int len;
+	u16 crc;
+
+	len = buf[0] + 1;
+	crc = crc_ccitt(0xffff, buf, len - 2);
+	crc = ~crc;
+
+	if (buf[len - 2] != (crc & 0xff) || buf[len - 1] != (crc >> 8)) {
+		pr_err("CRC error 0x%x != 0x%x 0x%x\n",
+		       crc, buf[len - 1], buf[len - 2]);
+		pr_info("%s: BAD CRC\n", __func__);
+		print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE,
+			       16, 2, buf, buflen, false);
+		return -EPERM;
+	}
+	return 0;
+}
+
+/*
+ * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees
+ * that i2c bus will be flushed and that next read will start on a new frame.
+ * returned skb contains only LLC header and payload.
+ * returns:
+ * -EREMOTEIO : i2c read error (fatal)
+ * -EBADMSG : frame was incorrect and discarded
+ * -ENOMEM : cannot allocate skb, frame dropped
+ */
+static int pn544_hci_i2c_read(struct pn544_i2c_phy *phy, struct sk_buff **skb)
+{
+	int r;
+	u8 len;
+	u8 tmp[PN544_HCI_I2C_LLC_MAX_SIZE - 1];
+	struct i2c_client *client = phy->i2c_dev;
+
+	r = i2c_master_recv(client, &len, 1);
+	if (r != 1) {
+		nfc_err(&client->dev, "cannot read len byte\n");
+		return -EREMOTEIO;
+	}
+
+	if ((len < (PN544_HCI_I2C_LLC_MIN_SIZE - 1)) ||
+	    (len > (PN544_HCI_I2C_LLC_MAX_SIZE - 1))) {
+		nfc_err(&client->dev, "invalid len byte\n");
+		r = -EBADMSG;
+		goto flush;
+	}
+
+	*skb = alloc_skb(1 + len, GFP_KERNEL);
+	if (*skb == NULL) {
+		r = -ENOMEM;
+		goto flush;
+	}
+
+	skb_put_u8(*skb, len);
+
+	r = i2c_master_recv(client, skb_put(*skb, len), len);
+	if (r != len) {
+		kfree_skb(*skb);
+		return -EREMOTEIO;
+	}
+
+	I2C_DUMP_SKB("i2c frame read", *skb);
+
+	r = check_crc((*skb)->data, (*skb)->len);
+	if (r != 0) {
+		kfree_skb(*skb);
+		r = -EBADMSG;
+		goto flush;
+	}
+
+	skb_pull(*skb, 1);
+	skb_trim(*skb, (*skb)->len - 2);
+
+	usleep_range(3000, 6000);
+
+	return 0;
+
+flush:
+	if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
+		r = -EREMOTEIO;
+
+	usleep_range(3000, 6000);
+
+	return r;
+}
+
+static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy)
+{
+	int r;
+	struct pn544_i2c_fw_frame_response response;
+	struct i2c_client *client = phy->i2c_dev;
+
+	r = i2c_master_recv(client, (char *) &response, sizeof(response));
+	if (r != sizeof(response)) {
+		nfc_err(&client->dev, "cannot read fw status\n");
+		return -EIO;
+	}
+
+	usleep_range(3000, 6000);
+
+	switch (response.status) {
+	case 0:
+		return 0;
+	case PN544_FW_CMD_RESULT_CHUNK_OK:
+		return response.status;
+	case PN544_FW_CMD_RESULT_TIMEOUT:
+		return -ETIMEDOUT;
+	case PN544_FW_CMD_RESULT_BAD_CRC:
+		return -ENODATA;
+	case PN544_FW_CMD_RESULT_ACCESS_DENIED:
+		return -EACCES;
+	case PN544_FW_CMD_RESULT_PROTOCOL_ERROR:
+		return -EPROTO;
+	case PN544_FW_CMD_RESULT_INVALID_PARAMETER:
+		return -EINVAL;
+	case PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND:
+		return -ENOTSUPP;
+	case PN544_FW_CMD_RESULT_INVALID_LENGTH:
+		return -EBADMSG;
+	case PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR:
+		return -ENOKEY;
+	case PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR:
+		return -EINVAL;
+	case PN544_FW_CMD_RESULT_MEMORY_ERROR:
+		return -ENOMEM;
+	case PN544_FW_CMD_RESULT_COMMAND_REJECTED:
+		return -EACCES;
+	case PN544_FW_CMD_RESULT_WRITE_FAILED:
+	case PN544_FW_CMD_RESULT_CHUNK_ERROR:
+		return -EIO;
+	default:
+		return -EIO;
+	}
+}
+
+/*
+ * Reads an shdlc frame from the chip. This is not as straightforward as it
+ * seems. There are cases where we could loose the frame start synchronization.
+ * The frame format is len-data-crc, and corruption can occur anywhere while
+ * transiting on i2c bus, such that we could read an invalid len.
+ * In order to recover synchronization with the next frame, we must be sure
+ * to read the real amount of data without using the len byte. We do this by
+ * assuming the following:
+ * - the chip will always present only one single complete frame on the bus
+ *   before triggering the interrupt
+ * - the chip will not present a new frame until we have completely read
+ *   the previous one (or until we have handled the interrupt).
+ * The tricky case is when we read a corrupted len that is less than the real
+ * len. We must detect this here in order to determine that we need to flush
+ * the bus. This is the reason why we check the crc here.
+ */
+static irqreturn_t pn544_hci_i2c_irq_thread_fn(int irq, void *phy_id)
+{
+	struct pn544_i2c_phy *phy = phy_id;
+	struct i2c_client *client;
+	struct sk_buff *skb = NULL;
+	int r;
+
+	if (!phy || irq != phy->i2c_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	client = phy->i2c_dev;
+	dev_dbg(&client->dev, "IRQ\n");
+
+	if (phy->hard_fault != 0)
+		return IRQ_HANDLED;
+
+	if (phy->run_mode == PN544_FW_MODE) {
+		phy->fw_cmd_result = pn544_hci_i2c_fw_read_status(phy);
+		schedule_work(&phy->fw_work);
+	} else {
+		r = pn544_hci_i2c_read(phy, &skb);
+		if (r == -EREMOTEIO) {
+			phy->hard_fault = r;
+
+			nfc_hci_recv_frame(phy->hdev, NULL);
+
+			return IRQ_HANDLED;
+		} else if ((r == -ENOMEM) || (r == -EBADMSG)) {
+			return IRQ_HANDLED;
+		}
+
+		nfc_hci_recv_frame(phy->hdev, skb);
+	}
+	return IRQ_HANDLED;
+}
+
+static struct nfc_phy_ops i2c_phy_ops = {
+	.write = pn544_hci_i2c_write,
+	.enable = pn544_hci_i2c_enable,
+	.disable = pn544_hci_i2c_disable,
+};
+
+static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name,
+					u8 hw_variant)
+{
+	struct pn544_i2c_phy *phy = phy_id;
+
+	pr_info("Starting Firmware Download (%s)\n", firmware_name);
+
+	strcpy(phy->firmware_name, firmware_name);
+
+	phy->hw_variant = hw_variant;
+	phy->fw_work_state = FW_WORK_STATE_START;
+
+	schedule_work(&phy->fw_work);
+
+	return 0;
+}
+
+static void pn544_hci_i2c_fw_work_complete(struct pn544_i2c_phy *phy,
+					   int result)
+{
+	pr_info("Firmware Download Complete, result=%d\n", result);
+
+	pn544_hci_i2c_disable(phy);
+
+	phy->fw_work_state = FW_WORK_STATE_IDLE;
+
+	if (phy->fw) {
+		release_firmware(phy->fw);
+		phy->fw = NULL;
+	}
+
+	nfc_fw_download_done(phy->hdev->ndev, phy->firmware_name, (u32) -result);
+}
+
+static int pn544_hci_i2c_fw_write_cmd(struct i2c_client *client, u32 dest_addr,
+				      const u8 *data, u16 datalen)
+{
+	u8 frame[PN544_FW_I2C_MAX_PAYLOAD];
+	struct pn544_i2c_fw_frame_write *framep;
+	u16 params_len;
+	int framelen;
+	int r;
+
+	if (datalen > PN544_FW_I2C_WRITE_DATA_MAX_LEN)
+		datalen = PN544_FW_I2C_WRITE_DATA_MAX_LEN;
+
+	framep = (struct pn544_i2c_fw_frame_write *) frame;
+
+	params_len = sizeof(framep->be_dest_addr) +
+		     sizeof(framep->be_datalen) + datalen;
+	framelen = params_len + sizeof(framep->cmd) +
+			     sizeof(framep->be_length);
+
+	framep->cmd = PN544_FW_CMD_WRITE;
+
+	put_unaligned_be16(params_len, &framep->be_length);
+
+	framep->be_dest_addr[0] = (dest_addr & 0xff0000) >> 16;
+	framep->be_dest_addr[1] = (dest_addr & 0xff00) >> 8;
+	framep->be_dest_addr[2] = dest_addr & 0xff;
+
+	put_unaligned_be16(datalen, &framep->be_datalen);
+
+	memcpy(framep->data, data, datalen);
+
+	r = i2c_master_send(client, frame, framelen);
+
+	if (r == framelen)
+		return datalen;
+	else if (r < 0)
+		return r;
+	else
+		return -EIO;
+}
+
+static int pn544_hci_i2c_fw_check_cmd(struct i2c_client *client, u32 start_addr,
+				      const u8 *data, u16 datalen)
+{
+	struct pn544_i2c_fw_frame_check frame;
+	int r;
+	u16 crc;
+
+	/* calculate local crc for the data we want to check */
+	crc = crc_ccitt(0xffff, data, datalen);
+
+	frame.cmd = PN544_FW_CMD_CHECK;
+
+	put_unaligned_be16(sizeof(frame.be_start_addr) +
+			   sizeof(frame.be_datalen) + sizeof(frame.be_crc),
+			   &frame.be_length);
+
+	/* tell the chip the memory region to which our crc applies */
+	frame.be_start_addr[0] = (start_addr & 0xff0000) >> 16;
+	frame.be_start_addr[1] = (start_addr & 0xff00) >> 8;
+	frame.be_start_addr[2] = start_addr & 0xff;
+
+	put_unaligned_be16(datalen, &frame.be_datalen);
+
+	/*
+	 * and give our local crc. Chip will calculate its own crc for the
+	 * region and compare with ours.
+	 */
+	put_unaligned_be16(crc, &frame.be_crc);
+
+	r = i2c_master_send(client, (const char *) &frame, sizeof(frame));
+
+	if (r == sizeof(frame))
+		return 0;
+	else if (r < 0)
+		return r;
+	else
+		return -EIO;
+}
+
+static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy)
+{
+	int r;
+
+	r = pn544_hci_i2c_fw_write_cmd(phy->i2c_dev,
+				       phy->fw_blob_dest_addr + phy->fw_written,
+				       phy->fw_blob_data + phy->fw_written,
+				       phy->fw_blob_size - phy->fw_written);
+	if (r < 0)
+		return r;
+
+	phy->fw_written += r;
+	phy->fw_work_state = FW_WORK_STATE_WAIT_WRITE_ANSWER;
+
+	return 0;
+}
+
+static int pn544_hci_i2c_fw_secure_write_frame_cmd(struct pn544_i2c_phy *phy,
+					const u8 *data, u16 datalen)
+{
+	u8 buf[PN544_FW_I2C_MAX_PAYLOAD];
+	struct pn544_i2c_fw_secure_frame *chunk;
+	int chunklen;
+	int r;
+
+	if (datalen > PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN)
+		datalen = PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN;
+
+	chunk = (struct pn544_i2c_fw_secure_frame *) buf;
+
+	chunk->cmd = PN544_FW_CMD_SECURE_CHUNK_WRITE;
+
+	put_unaligned_be16(datalen, &chunk->be_datalen);
+
+	memcpy(chunk->data, data, datalen);
+
+	chunklen = sizeof(chunk->cmd) + sizeof(chunk->be_datalen) + datalen;
+
+	r = i2c_master_send(phy->i2c_dev, buf, chunklen);
+
+	if (r == chunklen)
+		return datalen;
+	else if (r < 0)
+		return r;
+	else
+		return -EIO;
+
+}
+
+static int pn544_hci_i2c_fw_secure_write_frame(struct pn544_i2c_phy *phy)
+{
+	struct pn544_i2c_fw_secure_frame *framep;
+	int r;
+
+	framep = (struct pn544_i2c_fw_secure_frame *) phy->fw_blob_data;
+	if (phy->fw_written == 0)
+		phy->fw_blob_size = get_unaligned_be16(&framep->be_datalen)
+				+ PN544_FW_SECURE_FRAME_HEADER_LEN;
+
+	/* Only secure write command can be chunked*/
+	if (phy->fw_blob_size > PN544_FW_I2C_MAX_PAYLOAD &&
+			framep->cmd != PN544_FW_CMD_SECURE_WRITE)
+		return -EINVAL;
+
+	/* The firmware also have other commands, we just send them directly */
+	if (phy->fw_blob_size < PN544_FW_I2C_MAX_PAYLOAD) {
+		r = i2c_master_send(phy->i2c_dev,
+			(const char *) phy->fw_blob_data, phy->fw_blob_size);
+
+		if (r == phy->fw_blob_size)
+			goto exit;
+		else if (r < 0)
+			return r;
+		else
+			return -EIO;
+	}
+
+	r = pn544_hci_i2c_fw_secure_write_frame_cmd(phy,
+				       phy->fw_blob_data + phy->fw_written,
+				       phy->fw_blob_size - phy->fw_written);
+	if (r < 0)
+		return r;
+
+exit:
+	phy->fw_written += r;
+	phy->fw_work_state = FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER;
+
+	/* SW reset command will not trig any response from PN544 */
+	if (framep->cmd == PN544_FW_CMD_RESET) {
+		pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
+		phy->fw_cmd_result = 0;
+		schedule_work(&phy->fw_work);
+	}
+
+	return 0;
+}
+
+static void pn544_hci_i2c_fw_work(struct work_struct *work)
+{
+	struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy,
+						fw_work);
+	int r;
+	struct pn544_i2c_fw_blob *blob;
+	struct pn544_i2c_fw_secure_blob *secure_blob;
+
+	switch (phy->fw_work_state) {
+	case FW_WORK_STATE_START:
+		pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
+
+		r = request_firmware(&phy->fw, phy->firmware_name,
+				     &phy->i2c_dev->dev);
+		if (r < 0)
+			goto exit_state_start;
+
+		phy->fw_written = 0;
+
+		switch (phy->hw_variant) {
+		case PN544_HW_VARIANT_C2:
+			blob = (struct pn544_i2c_fw_blob *) phy->fw->data;
+			phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
+			phy->fw_blob_dest_addr = get_unaligned_be32(
+							&blob->be_destaddr);
+			phy->fw_blob_data = blob->data;
+
+			r = pn544_hci_i2c_fw_write_chunk(phy);
+			break;
+		case PN544_HW_VARIANT_C3:
+			secure_blob = (struct pn544_i2c_fw_secure_blob *)
+								phy->fw->data;
+			phy->fw_blob_data = secure_blob->data;
+			phy->fw_size = phy->fw->size;
+			r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			break;
+		default:
+			r = -ENOTSUPP;
+			break;
+		}
+
+exit_state_start:
+		if (r < 0)
+			pn544_hci_i2c_fw_work_complete(phy, r);
+		break;
+
+	case FW_WORK_STATE_WAIT_WRITE_ANSWER:
+		r = phy->fw_cmd_result;
+		if (r < 0)
+			goto exit_state_wait_write_answer;
+
+		if (phy->fw_written == phy->fw_blob_size) {
+			r = pn544_hci_i2c_fw_check_cmd(phy->i2c_dev,
+						       phy->fw_blob_dest_addr,
+						       phy->fw_blob_data,
+						       phy->fw_blob_size);
+			if (r < 0)
+				goto exit_state_wait_write_answer;
+			phy->fw_work_state = FW_WORK_STATE_WAIT_CHECK_ANSWER;
+			break;
+		}
+
+		r = pn544_hci_i2c_fw_write_chunk(phy);
+
+exit_state_wait_write_answer:
+		if (r < 0)
+			pn544_hci_i2c_fw_work_complete(phy, r);
+		break;
+
+	case FW_WORK_STATE_WAIT_CHECK_ANSWER:
+		r = phy->fw_cmd_result;
+		if (r < 0)
+			goto exit_state_wait_check_answer;
+
+		blob = (struct pn544_i2c_fw_blob *) (phy->fw_blob_data +
+		       phy->fw_blob_size);
+		phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
+		if (phy->fw_blob_size != 0) {
+			phy->fw_blob_dest_addr =
+					get_unaligned_be32(&blob->be_destaddr);
+			phy->fw_blob_data = blob->data;
+
+			phy->fw_written = 0;
+			r = pn544_hci_i2c_fw_write_chunk(phy);
+		}
+
+exit_state_wait_check_answer:
+		if (r < 0 || phy->fw_blob_size == 0)
+			pn544_hci_i2c_fw_work_complete(phy, r);
+		break;
+
+	case FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER:
+		r = phy->fw_cmd_result;
+		if (r < 0)
+			goto exit_state_wait_secure_write_answer;
+
+		if (r == PN544_FW_CMD_RESULT_CHUNK_OK) {
+			r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			goto exit_state_wait_secure_write_answer;
+		}
+
+		if (phy->fw_written == phy->fw_blob_size) {
+			secure_blob = (struct pn544_i2c_fw_secure_blob *)
+				(phy->fw_blob_data + phy->fw_blob_size);
+			phy->fw_size -= phy->fw_blob_size +
+				PN544_FW_SECURE_BLOB_HEADER_LEN;
+			if (phy->fw_size >= PN544_FW_SECURE_BLOB_HEADER_LEN
+					+ PN544_FW_SECURE_FRAME_HEADER_LEN) {
+				phy->fw_blob_data = secure_blob->data;
+
+				phy->fw_written = 0;
+				r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			}
+		}
+
+exit_state_wait_secure_write_answer:
+		if (r < 0 || phy->fw_size == 0)
+			pn544_hci_i2c_fw_work_complete(phy, r);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static const struct acpi_gpio_params enable_gpios = { 1, 0, false };
+static const struct acpi_gpio_params firmware_gpios = { 2, 0, false };
+
+static const struct acpi_gpio_mapping acpi_pn544_gpios[] = {
+	{ "enable-gpios", &enable_gpios, 1 },
+	{ "firmware-gpios", &firmware_gpios, 1 },
+	{ },
+};
+
+static int pn544_hci_i2c_probe(struct i2c_client *client,
+			       const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct pn544_i2c_phy *phy;
+	int r = 0;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+	dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(&client->dev, sizeof(struct pn544_i2c_phy),
+			   GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	INIT_WORK(&phy->fw_work, pn544_hci_i2c_fw_work);
+	phy->fw_work_state = FW_WORK_STATE_IDLE;
+
+	phy->i2c_dev = client;
+	i2c_set_clientdata(client, phy);
+
+	r = devm_acpi_dev_add_driver_gpios(dev, acpi_pn544_gpios);
+	if (r)
+		dev_dbg(dev, "Unable to add GPIO mapping table\n");
+
+	/* Get EN GPIO */
+	phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(phy->gpiod_en)) {
+		nfc_err(dev, "Unable to get EN GPIO\n");
+		return PTR_ERR(phy->gpiod_en);
+	}
+
+	/* Get FW GPIO */
+	phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW);
+	if (IS_ERR(phy->gpiod_fw)) {
+		nfc_err(dev, "Unable to get FW GPIO\n");
+		return PTR_ERR(phy->gpiod_fw);
+	}
+
+	pn544_hci_i2c_platform_init(phy);
+
+	r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+				      pn544_hci_i2c_irq_thread_fn,
+				      IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				      PN544_HCI_I2C_DRIVER_NAME, phy);
+	if (r < 0) {
+		nfc_err(&client->dev, "Unable to register IRQ handler\n");
+		return r;
+	}
+
+	r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
+			    PN544_I2C_FRAME_HEADROOM, PN544_I2C_FRAME_TAILROOM,
+			    PN544_HCI_I2C_LLC_MAX_PAYLOAD,
+			    pn544_hci_i2c_fw_download, &phy->hdev);
+	if (r < 0)
+		return r;
+
+	return 0;
+}
+
+static int pn544_hci_i2c_remove(struct i2c_client *client)
+{
+	struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	cancel_work_sync(&phy->fw_work);
+	if (phy->fw_work_state != FW_WORK_STATE_IDLE)
+		pn544_hci_i2c_fw_work_complete(phy, -ENODEV);
+
+	pn544_hci_remove(phy->hdev);
+
+	if (phy->powered)
+		pn544_hci_i2c_disable(phy);
+
+	return 0;
+}
+
+static const struct of_device_id of_pn544_i2c_match[] = {
+	{ .compatible = "nxp,pn544-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_pn544_i2c_match);
+
+static struct i2c_driver pn544_hci_i2c_driver = {
+	.driver = {
+		   .name = PN544_HCI_I2C_DRIVER_NAME,
+		   .of_match_table = of_match_ptr(of_pn544_i2c_match),
+		   .acpi_match_table = ACPI_PTR(pn544_hci_i2c_acpi_match),
+		  },
+	.probe = pn544_hci_i2c_probe,
+	.id_table = pn544_hci_i2c_id_table,
+	.remove = pn544_hci_i2c_remove,
+};
+
+module_i2c_driver(pn544_hci_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c
new file mode 100644
index 000000000..ad57a8ec0
--- /dev/null
+++ b/drivers/nfc/pn544/mei.c
@@ -0,0 +1,88 @@
+/*
+ * HCI based Driver for NXP pn544 NFC Chip
+ *
+ * Copyright (C) 2013  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "../mei_phy.h"
+#include "pn544.h"
+
+#define PN544_DRIVER_NAME "pn544"
+
+static int pn544_mei_probe(struct mei_cl_device *cldev,
+			       const struct mei_cl_device_id *id)
+{
+	struct nfc_mei_phy *phy;
+	int r;
+
+	pr_info("Probing NFC pn544\n");
+
+	phy = nfc_mei_phy_alloc(cldev);
+	if (!phy) {
+		pr_err("Cannot allocate memory for pn544 mei phy.\n");
+		return -ENOMEM;
+	}
+
+	r = pn544_hci_probe(phy, &mei_phy_ops, LLC_NOP_NAME,
+			    MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD,
+			    NULL, &phy->hdev);
+	if (r < 0) {
+		nfc_mei_phy_free(phy);
+
+		return r;
+	}
+
+	return 0;
+}
+
+static int pn544_mei_remove(struct mei_cl_device *cldev)
+{
+	struct nfc_mei_phy *phy = mei_cldev_get_drvdata(cldev);
+
+	pr_info("Removing pn544\n");
+
+	pn544_hci_remove(phy->hdev);
+
+	nfc_mei_phy_free(phy);
+
+	return 0;
+}
+
+static struct mei_cl_device_id pn544_mei_tbl[] = {
+	{ PN544_DRIVER_NAME, MEI_NFC_UUID, MEI_CL_VERSION_ANY},
+
+	/* required last entry */
+	{ }
+};
+MODULE_DEVICE_TABLE(mei, pn544_mei_tbl);
+
+static struct mei_cl_driver pn544_driver = {
+	.id_table = pn544_mei_tbl,
+	.name = PN544_DRIVER_NAME,
+
+	.probe = pn544_mei_probe,
+	.remove = pn544_mei_remove,
+};
+
+module_mei_cl_driver(pn544_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c
new file mode 100644
index 000000000..f30bdf956
--- /dev/null
+++ b/drivers/nfc/pn544/pn544.c
@@ -0,0 +1,995 @@
+/*
+ * HCI based Driver for NXP PN544 NFC Chip
+ *
+ * Copyright (C) 2012  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "pn544.h"
+
+/* Timing restrictions (ms) */
+#define PN544_HCI_RESETVEN_TIME		30
+
+enum pn544_state {
+	PN544_ST_COLD,
+	PN544_ST_FW_READY,
+	PN544_ST_READY,
+};
+
+#define FULL_VERSION_LEN 11
+
+/* Proprietary commands */
+#define PN544_WRITE		0x3f
+#define PN544_TEST_SWP		0x21
+
+/* Proprietary gates, events, commands and registers */
+
+/* NFC_HCI_RF_READER_A_GATE additional registers and commands */
+#define PN544_RF_READER_A_AUTO_ACTIVATION			0x10
+#define PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION		0x12
+#define PN544_MIFARE_CMD					0x21
+
+/* Commands that apply to all RF readers */
+#define PN544_RF_READER_CMD_PRESENCE_CHECK	0x30
+#define PN544_RF_READER_CMD_ACTIVATE_NEXT	0x32
+
+/* NFC_HCI_ID_MGMT_GATE additional registers */
+#define PN544_ID_MGMT_FULL_VERSION_SW		0x10
+
+#define PN544_RF_READER_ISO15693_GATE		0x12
+
+#define PN544_RF_READER_F_GATE			0x14
+#define PN544_FELICA_ID				0x04
+#define PN544_FELICA_RAW			0x20
+
+#define PN544_RF_READER_JEWEL_GATE		0x15
+#define PN544_JEWEL_RAW_CMD			0x23
+
+#define PN544_RF_READER_NFCIP1_INITIATOR_GATE	0x30
+#define PN544_RF_READER_NFCIP1_TARGET_GATE	0x31
+
+#define PN544_SYS_MGMT_GATE			0x90
+#define PN544_SYS_MGMT_INFO_NOTIFICATION	0x02
+
+#define PN544_POLLING_LOOP_MGMT_GATE		0x94
+#define PN544_DEP_MODE				0x01
+#define PN544_DEP_ATR_REQ			0x02
+#define PN544_DEP_ATR_RES			0x03
+#define PN544_DEP_MERGE				0x0D
+#define PN544_PL_RDPHASES			0x06
+#define PN544_PL_EMULATION			0x07
+#define PN544_PL_NFCT_DEACTIVATED		0x09
+
+#define PN544_SWP_MGMT_GATE			0xA0
+#define PN544_SWP_DEFAULT_MODE			0x01
+
+#define PN544_NFC_WI_MGMT_GATE			0xA1
+#define PN544_NFC_ESE_DEFAULT_MODE		0x01
+
+#define PN544_HCI_EVT_SND_DATA			0x01
+#define PN544_HCI_EVT_ACTIVATED			0x02
+#define PN544_HCI_EVT_DEACTIVATED		0x03
+#define PN544_HCI_EVT_RCV_DATA			0x04
+#define PN544_HCI_EVT_CONTINUE_MI		0x05
+#define PN544_HCI_EVT_SWITCH_MODE		0x03
+
+#define PN544_HCI_CMD_ATTREQUEST		0x12
+#define PN544_HCI_CMD_CONTINUE_ACTIVATION	0x13
+
+static struct nfc_hci_gate pn544_gates[] = {
+	{NFC_HCI_ADMIN_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_LOOPBACK_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_ID_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_LINK_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_RF_READER_B_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_RF_READER_A_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_SYS_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_SWP_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_POLLING_LOOP_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_NFC_WI_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_RF_READER_F_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_RF_READER_JEWEL_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_RF_READER_ISO15693_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_RF_READER_NFCIP1_INITIATOR_GATE, NFC_HCI_INVALID_PIPE},
+	{PN544_RF_READER_NFCIP1_TARGET_GATE, NFC_HCI_INVALID_PIPE}
+};
+
+/* Largest headroom needed for outgoing custom commands */
+#define PN544_CMDS_HEADROOM	2
+
+struct pn544_hci_info {
+	struct nfc_phy_ops *phy_ops;
+	void *phy_id;
+
+	struct nfc_hci_dev *hdev;
+
+	enum pn544_state state;
+
+	struct mutex info_lock;
+
+	int async_cb_type;
+	data_exchange_cb_t async_cb;
+	void *async_cb_context;
+
+	fw_download_t fw_download;
+};
+
+static int pn544_hci_open(struct nfc_hci_dev *hdev)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+	int r = 0;
+
+	mutex_lock(&info->info_lock);
+
+	if (info->state != PN544_ST_COLD) {
+		r = -EBUSY;
+		goto out;
+	}
+
+	r = info->phy_ops->enable(info->phy_id);
+
+	if (r == 0)
+		info->state = PN544_ST_READY;
+
+out:
+	mutex_unlock(&info->info_lock);
+	return r;
+}
+
+static void pn544_hci_close(struct nfc_hci_dev *hdev)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	mutex_lock(&info->info_lock);
+
+	if (info->state == PN544_ST_COLD)
+		goto out;
+
+	info->phy_ops->disable(info->phy_id);
+
+	info->state = PN544_ST_COLD;
+
+out:
+	mutex_unlock(&info->info_lock);
+}
+
+static int pn544_hci_ready(struct nfc_hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	static struct hw_config {
+		u8 adr[2];
+		u8 value;
+	} hw_config[] = {
+		{{0x9f, 0x9a}, 0x00},
+
+		{{0x98, 0x10}, 0xbc},
+
+		{{0x9e, 0x71}, 0x00},
+
+		{{0x98, 0x09}, 0x00},
+
+		{{0x9e, 0xb4}, 0x00},
+
+		{{0x9c, 0x01}, 0x08},
+
+		{{0x9e, 0xaa}, 0x01},
+
+		{{0x9b, 0xd1}, 0x17},
+		{{0x9b, 0xd2}, 0x58},
+		{{0x9b, 0xd3}, 0x10},
+		{{0x9b, 0xd4}, 0x47},
+		{{0x9b, 0xd5}, 0x0c},
+		{{0x9b, 0xd6}, 0x37},
+		{{0x9b, 0xdd}, 0x33},
+
+		{{0x9b, 0x84}, 0x00},
+		{{0x99, 0x81}, 0x79},
+		{{0x99, 0x31}, 0x79},
+
+		{{0x98, 0x00}, 0x3f},
+
+		{{0x9f, 0x09}, 0x02},
+
+		{{0x9f, 0x0a}, 0x05},
+
+		{{0x9e, 0xd1}, 0xa1},
+		{{0x99, 0x23}, 0x01},
+
+		{{0x9e, 0x74}, 0x00},
+		{{0x9e, 0x90}, 0x00},
+		{{0x9f, 0x28}, 0x10},
+
+		{{0x9f, 0x35}, 0x04},
+
+		{{0x9f, 0x36}, 0x11},
+
+		{{0x9c, 0x31}, 0x00},
+
+		{{0x9c, 0x32}, 0x00},
+
+		{{0x9c, 0x19}, 0x0a},
+
+		{{0x9c, 0x1a}, 0x0a},
+
+		{{0x9c, 0x0c}, 0x00},
+
+		{{0x9c, 0x0d}, 0x00},
+
+		{{0x9c, 0x12}, 0x00},
+
+		{{0x9c, 0x13}, 0x00},
+
+		{{0x98, 0xa2}, 0x09},
+
+		{{0x98, 0x93}, 0x00},
+
+		{{0x98, 0x7d}, 0x08},
+		{{0x98, 0x7e}, 0x00},
+		{{0x9f, 0xc8}, 0x00},
+	};
+	struct hw_config *p = hw_config;
+	int count = ARRAY_SIZE(hw_config);
+	struct sk_buff *res_skb;
+	u8 param[4];
+	int r;
+
+	param[0] = 0;
+	while (count--) {
+		param[1] = p->adr[0];
+		param[2] = p->adr[1];
+		param[3] = p->value;
+
+		r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE, PN544_WRITE,
+				     param, 4, &res_skb);
+		if (r < 0)
+			return r;
+
+		if (res_skb->len != 1) {
+			kfree_skb(res_skb);
+			return -EPROTO;
+		}
+
+		if (res_skb->data[0] != p->value) {
+			kfree_skb(res_skb);
+			return -EIO;
+		}
+
+		kfree_skb(res_skb);
+
+		p++;
+	}
+
+	param[0] = NFC_HCI_UICC_HOST_ID;
+	r = nfc_hci_set_param(hdev, NFC_HCI_ADMIN_GATE,
+			      NFC_HCI_ADMIN_WHITELIST, param, 1);
+	if (r < 0)
+		return r;
+
+	param[0] = 0x3d;
+	r = nfc_hci_set_param(hdev, PN544_SYS_MGMT_GATE,
+			      PN544_SYS_MGMT_INFO_NOTIFICATION, param, 1);
+	if (r < 0)
+		return r;
+
+	param[0] = 0x0;
+	r = nfc_hci_set_param(hdev, NFC_HCI_RF_READER_A_GATE,
+			      PN544_RF_READER_A_AUTO_ACTIVATION, param, 1);
+	if (r < 0)
+		return r;
+
+	r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+			       NFC_HCI_EVT_END_OPERATION, NULL, 0);
+	if (r < 0)
+		return r;
+
+	param[0] = 0x1;
+	r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+			      PN544_PL_NFCT_DEACTIVATED, param, 1);
+	if (r < 0)
+		return r;
+
+	param[0] = 0x0;
+	r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+			      PN544_PL_RDPHASES, param, 1);
+	if (r < 0)
+		return r;
+
+	r = nfc_hci_get_param(hdev, NFC_HCI_ID_MGMT_GATE,
+			      PN544_ID_MGMT_FULL_VERSION_SW, &skb);
+	if (r < 0)
+		return r;
+
+	if (skb->len != FULL_VERSION_LEN) {
+		kfree_skb(skb);
+		return -EINVAL;
+	}
+
+	print_hex_dump(KERN_DEBUG, "FULL VERSION SOFTWARE INFO: ",
+		       DUMP_PREFIX_NONE, 16, 1,
+		       skb->data, FULL_VERSION_LEN, false);
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int pn544_hci_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	return info->phy_ops->write(info->phy_id, skb);
+}
+
+static int pn544_hci_start_poll(struct nfc_hci_dev *hdev,
+				u32 im_protocols, u32 tm_protocols)
+{
+	u8 phases = 0;
+	int r;
+	u8 duration[2];
+	u8 activated;
+	u8 i_mode = 0x3f; /* Enable all supported modes */
+	u8 t_mode = 0x0f;
+	u8 t_merge = 0x01; /* Enable merge by default */
+
+	pr_info(DRIVER_DESC ": %s protocols 0x%x 0x%x\n",
+		__func__, im_protocols, tm_protocols);
+
+	r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+			       NFC_HCI_EVT_END_OPERATION, NULL, 0);
+	if (r < 0)
+		return r;
+
+	duration[0] = 0x18;
+	duration[1] = 0x6a;
+	r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+			      PN544_PL_EMULATION, duration, 2);
+	if (r < 0)
+		return r;
+
+	activated = 0;
+	r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+			      PN544_PL_NFCT_DEACTIVATED, &activated, 1);
+	if (r < 0)
+		return r;
+
+	if (im_protocols & (NFC_PROTO_ISO14443_MASK | NFC_PROTO_MIFARE_MASK |
+			 NFC_PROTO_JEWEL_MASK))
+		phases |= 1;		/* Type A */
+	if (im_protocols & NFC_PROTO_FELICA_MASK) {
+		phases |= (1 << 2);	/* Type F 212 */
+		phases |= (1 << 3);	/* Type F 424 */
+	}
+
+	phases |= (1 << 5);		/* NFC active */
+
+	r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE,
+			      PN544_PL_RDPHASES, &phases, 1);
+	if (r < 0)
+		return r;
+
+	if ((im_protocols | tm_protocols) & NFC_PROTO_NFC_DEP_MASK) {
+		hdev->gb = nfc_get_local_general_bytes(hdev->ndev,
+							&hdev->gb_len);
+		pr_debug("generate local bytes %p\n", hdev->gb);
+		if (hdev->gb == NULL || hdev->gb_len == 0) {
+			im_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+			tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+		}
+	}
+
+	if (im_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		r = nfc_hci_send_event(hdev,
+				PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+				NFC_HCI_EVT_END_OPERATION, NULL, 0);
+		if (r < 0)
+			return r;
+
+		r = nfc_hci_set_param(hdev,
+				PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+				PN544_DEP_MODE, &i_mode, 1);
+		if (r < 0)
+			return r;
+
+		r = nfc_hci_set_param(hdev,
+				PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+				PN544_DEP_ATR_REQ, hdev->gb, hdev->gb_len);
+		if (r < 0)
+			return r;
+
+		r = nfc_hci_send_event(hdev,
+				PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+				NFC_HCI_EVT_READER_REQUESTED, NULL, 0);
+		if (r < 0)
+			nfc_hci_send_event(hdev,
+					PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+					NFC_HCI_EVT_END_OPERATION, NULL, 0);
+	}
+
+	if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE,
+				PN544_DEP_MODE, &t_mode, 1);
+		if (r < 0)
+			return r;
+
+		r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE,
+				PN544_DEP_ATR_RES, hdev->gb, hdev->gb_len);
+		if (r < 0)
+			return r;
+
+		r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE,
+				PN544_DEP_MERGE, &t_merge, 1);
+		if (r < 0)
+			return r;
+	}
+
+	r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+			       NFC_HCI_EVT_READER_REQUESTED, NULL, 0);
+	if (r < 0)
+		nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+				   NFC_HCI_EVT_END_OPERATION, NULL, 0);
+
+	return r;
+}
+
+static int pn544_hci_dep_link_up(struct nfc_hci_dev *hdev,
+				struct nfc_target *target, u8 comm_mode,
+				u8 *gb, size_t gb_len)
+{
+	struct sk_buff *rgb_skb = NULL;
+	int r;
+
+	r = nfc_hci_get_param(hdev, target->hci_reader_gate,
+				PN544_DEP_ATR_RES, &rgb_skb);
+	if (r < 0)
+		return r;
+
+	if (rgb_skb->len == 0 || rgb_skb->len > NFC_GB_MAXSIZE) {
+		r = -EPROTO;
+		goto exit;
+	}
+	print_hex_dump(KERN_DEBUG, "remote gb: ", DUMP_PREFIX_OFFSET,
+			16, 1, rgb_skb->data, rgb_skb->len, true);
+
+	r = nfc_set_remote_general_bytes(hdev->ndev, rgb_skb->data,
+						rgb_skb->len);
+
+	if (r == 0)
+		r = nfc_dep_link_is_up(hdev->ndev, target->idx, comm_mode,
+					NFC_RF_INITIATOR);
+exit:
+	kfree_skb(rgb_skb);
+	return r;
+}
+
+static int pn544_hci_dep_link_down(struct nfc_hci_dev *hdev)
+{
+
+	return nfc_hci_send_event(hdev, PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+					NFC_HCI_EVT_END_OPERATION, NULL, 0);
+}
+
+static int pn544_hci_target_from_gate(struct nfc_hci_dev *hdev, u8 gate,
+				      struct nfc_target *target)
+{
+	switch (gate) {
+	case PN544_RF_READER_F_GATE:
+		target->supported_protocols = NFC_PROTO_FELICA_MASK;
+		break;
+	case PN544_RF_READER_JEWEL_GATE:
+		target->supported_protocols = NFC_PROTO_JEWEL_MASK;
+		target->sens_res = 0x0c00;
+		break;
+	case PN544_RF_READER_NFCIP1_INITIATOR_GATE:
+		target->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+		break;
+	default:
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+static int pn544_hci_complete_target_discovered(struct nfc_hci_dev *hdev,
+						u8 gate,
+						struct nfc_target *target)
+{
+	struct sk_buff *uid_skb;
+	int r = 0;
+
+	if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE)
+		return r;
+
+	if (target->supported_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		r = nfc_hci_send_cmd(hdev,
+			PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+			PN544_HCI_CMD_CONTINUE_ACTIVATION, NULL, 0, NULL);
+		if (r < 0)
+			return r;
+
+		target->hci_reader_gate = PN544_RF_READER_NFCIP1_INITIATOR_GATE;
+	} else if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) {
+		if (target->nfcid1_len != 4 && target->nfcid1_len != 7 &&
+		    target->nfcid1_len != 10)
+			return -EPROTO;
+
+		r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
+				     PN544_RF_READER_CMD_ACTIVATE_NEXT,
+				     target->nfcid1, target->nfcid1_len, NULL);
+	} else if (target->supported_protocols & NFC_PROTO_FELICA_MASK) {
+		r = nfc_hci_get_param(hdev, PN544_RF_READER_F_GATE,
+				      PN544_FELICA_ID, &uid_skb);
+		if (r < 0)
+			return r;
+
+		if (uid_skb->len != 8) {
+			kfree_skb(uid_skb);
+			return -EPROTO;
+		}
+
+		/* Type F NFC-DEP IDm has prefix 0x01FE */
+		if ((uid_skb->data[0] == 0x01) && (uid_skb->data[1] == 0xfe)) {
+			kfree_skb(uid_skb);
+			r = nfc_hci_send_cmd(hdev,
+					PN544_RF_READER_NFCIP1_INITIATOR_GATE,
+					PN544_HCI_CMD_CONTINUE_ACTIVATION,
+					NULL, 0, NULL);
+			if (r < 0)
+				return r;
+
+			target->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+			target->hci_reader_gate =
+				PN544_RF_READER_NFCIP1_INITIATOR_GATE;
+		} else {
+			r = nfc_hci_send_cmd(hdev, PN544_RF_READER_F_GATE,
+					     PN544_RF_READER_CMD_ACTIVATE_NEXT,
+					     uid_skb->data, uid_skb->len, NULL);
+			kfree_skb(uid_skb);
+		}
+	} else if (target->supported_protocols & NFC_PROTO_ISO14443_MASK) {
+		/*
+		 * TODO: maybe other ISO 14443 require some kind of continue
+		 * activation, but for now we've seen only this one below.
+		 */
+		if (target->sens_res == 0x4403)	/* Type 4 Mifare DESFire */
+			r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
+			      PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION,
+			      NULL, 0, NULL);
+	}
+
+	return r;
+}
+
+#define PN544_CB_TYPE_READER_F 1
+
+static void pn544_hci_data_exchange_cb(void *context, struct sk_buff *skb,
+				       int err)
+{
+	struct pn544_hci_info *info = context;
+
+	switch (info->async_cb_type) {
+	case PN544_CB_TYPE_READER_F:
+		if (err == 0)
+			skb_pull(skb, 1);
+		info->async_cb(info->async_cb_context, skb, err);
+		break;
+	default:
+		if (err == 0)
+			kfree_skb(skb);
+		break;
+	}
+}
+
+#define MIFARE_CMD_AUTH_KEY_A	0x60
+#define MIFARE_CMD_AUTH_KEY_B	0x61
+#define MIFARE_CMD_HEADER	2
+#define MIFARE_UID_LEN		4
+#define MIFARE_KEY_LEN		6
+#define MIFARE_CMD_LEN		12
+/*
+ * Returns:
+ * <= 0: driver handled the data exchange
+ *    1: driver doesn't especially handle, please do standard processing
+ */
+static int pn544_hci_im_transceive(struct nfc_hci_dev *hdev,
+				   struct nfc_target *target,
+				   struct sk_buff *skb, data_exchange_cb_t cb,
+				   void *cb_context)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	pr_info(DRIVER_DESC ": %s for gate=%d\n", __func__,
+		target->hci_reader_gate);
+
+	switch (target->hci_reader_gate) {
+	case NFC_HCI_RF_READER_A_GATE:
+		if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) {
+			/*
+			 * It seems that pn544 is inverting key and UID for
+			 * MIFARE authentication commands.
+			 */
+			if (skb->len == MIFARE_CMD_LEN &&
+			    (skb->data[0] == MIFARE_CMD_AUTH_KEY_A ||
+			     skb->data[0] == MIFARE_CMD_AUTH_KEY_B)) {
+				u8 uid[MIFARE_UID_LEN];
+				u8 *data = skb->data + MIFARE_CMD_HEADER;
+
+				memcpy(uid, data + MIFARE_KEY_LEN,
+				       MIFARE_UID_LEN);
+				memmove(data + MIFARE_UID_LEN, data,
+					MIFARE_KEY_LEN);
+				memcpy(data, uid, MIFARE_UID_LEN);
+			}
+
+			return nfc_hci_send_cmd_async(hdev,
+						      target->hci_reader_gate,
+						      PN544_MIFARE_CMD,
+						      skb->data, skb->len,
+						      cb, cb_context);
+		} else
+			return 1;
+	case PN544_RF_READER_F_GATE:
+		*(u8 *)skb_push(skb, 1) = 0;
+		*(u8 *)skb_push(skb, 1) = 0;
+
+		info->async_cb_type = PN544_CB_TYPE_READER_F;
+		info->async_cb = cb;
+		info->async_cb_context = cb_context;
+
+		return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+					      PN544_FELICA_RAW, skb->data,
+					      skb->len,
+					      pn544_hci_data_exchange_cb, info);
+	case PN544_RF_READER_JEWEL_GATE:
+		return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+					      PN544_JEWEL_RAW_CMD, skb->data,
+					      skb->len, cb, cb_context);
+	case PN544_RF_READER_NFCIP1_INITIATOR_GATE:
+		*(u8 *)skb_push(skb, 1) = 0;
+
+		return nfc_hci_send_event(hdev, target->hci_reader_gate,
+					PN544_HCI_EVT_SND_DATA, skb->data,
+					skb->len);
+	default:
+		return 1;
+	}
+}
+
+static int pn544_hci_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	int r;
+
+	/* Set default false for multiple information chaining */
+	*(u8 *)skb_push(skb, 1) = 0;
+
+	r = nfc_hci_send_event(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE,
+			       PN544_HCI_EVT_SND_DATA, skb->data, skb->len);
+
+	kfree_skb(skb);
+
+	return r;
+}
+
+static int pn544_hci_check_presence(struct nfc_hci_dev *hdev,
+				   struct nfc_target *target)
+{
+	pr_debug("supported protocol %d\b", target->supported_protocols);
+	if (target->supported_protocols & (NFC_PROTO_ISO14443_MASK |
+					NFC_PROTO_ISO14443_B_MASK)) {
+		return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+					PN544_RF_READER_CMD_PRESENCE_CHECK,
+					NULL, 0, NULL);
+	} else if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) {
+		if (target->nfcid1_len != 4 && target->nfcid1_len != 7 &&
+		    target->nfcid1_len != 10)
+			return -EOPNOTSUPP;
+
+		return nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
+				     PN544_RF_READER_CMD_ACTIVATE_NEXT,
+				     target->nfcid1, target->nfcid1_len, NULL);
+	} else if (target->supported_protocols & (NFC_PROTO_JEWEL_MASK |
+						NFC_PROTO_FELICA_MASK)) {
+		return -EOPNOTSUPP;
+	} else if (target->supported_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+					PN544_HCI_CMD_ATTREQUEST,
+					NULL, 0, NULL);
+	}
+
+	return 0;
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the event, skb consumed
+ *    1: driver does not handle the event, please do standard processing
+ */
+static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, u8 event,
+				    struct sk_buff *skb)
+{
+	struct sk_buff *rgb_skb = NULL;
+	u8 gate = hdev->pipes[pipe].gate;
+	int r;
+
+	pr_debug("hci event %d\n", event);
+	switch (event) {
+	case PN544_HCI_EVT_ACTIVATED:
+		if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) {
+			r = nfc_hci_target_discovered(hdev, gate);
+		} else if (gate == PN544_RF_READER_NFCIP1_TARGET_GATE) {
+			r = nfc_hci_get_param(hdev, gate, PN544_DEP_ATR_REQ,
+					      &rgb_skb);
+			if (r < 0)
+				goto exit;
+
+			r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK,
+					     NFC_COMM_PASSIVE, rgb_skb->data,
+					     rgb_skb->len);
+
+			kfree_skb(rgb_skb);
+		} else {
+			r = -EINVAL;
+		}
+		break;
+	case PN544_HCI_EVT_DEACTIVATED:
+		r = nfc_hci_send_event(hdev, gate, NFC_HCI_EVT_END_OPERATION,
+				       NULL, 0);
+		break;
+	case PN544_HCI_EVT_RCV_DATA:
+		if (skb->len < 2) {
+			r = -EPROTO;
+			goto exit;
+		}
+
+		if (skb->data[0] != 0) {
+			pr_debug("data0 %d\n", skb->data[0]);
+			r = -EPROTO;
+			goto exit;
+		}
+
+		skb_pull(skb, 2);
+		return nfc_tm_data_received(hdev->ndev, skb);
+	default:
+		return 1;
+	}
+
+exit:
+	kfree_skb(skb);
+
+	return r;
+}
+
+static int pn544_hci_fw_download(struct nfc_hci_dev *hdev,
+				 const char *firmware_name)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	if (info->fw_download == NULL)
+		return -ENOTSUPP;
+
+	return info->fw_download(info->phy_id, firmware_name, hdev->sw_romlib);
+}
+
+static int pn544_hci_discover_se(struct nfc_hci_dev *hdev)
+{
+	u32 se_idx = 0;
+	u8 ese_mode = 0x01; /* Default mode */
+	struct sk_buff *res_skb;
+	int r;
+
+	r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE, PN544_TEST_SWP,
+			     NULL, 0, &res_skb);
+
+	if (r == 0) {
+		if (res_skb->len == 2 && res_skb->data[0] == 0x00)
+			nfc_add_se(hdev->ndev, se_idx++, NFC_SE_UICC);
+
+		kfree_skb(res_skb);
+	}
+
+	r = nfc_hci_send_event(hdev, PN544_NFC_WI_MGMT_GATE,
+				PN544_HCI_EVT_SWITCH_MODE,
+				&ese_mode, 1);
+	if (r == 0)
+		nfc_add_se(hdev->ndev, se_idx++, NFC_SE_EMBEDDED);
+
+	return !se_idx;
+}
+
+#define PN544_SE_MODE_OFF	0x00
+#define PN544_SE_MODE_ON	0x01
+static int pn544_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx)
+{
+	struct nfc_se *se;
+	u8 enable = PN544_SE_MODE_ON;
+	static struct uicc_gatelist {
+		u8 head;
+		u8 adr[2];
+		u8 value;
+	} uicc_gatelist[] = {
+		{0x00, {0x9e, 0xd9}, 0x23},
+		{0x00, {0x9e, 0xda}, 0x21},
+		{0x00, {0x9e, 0xdb}, 0x22},
+		{0x00, {0x9e, 0xdc}, 0x24},
+	};
+	struct uicc_gatelist *p = uicc_gatelist;
+	int count = ARRAY_SIZE(uicc_gatelist);
+	struct sk_buff *res_skb;
+	int r;
+
+	se = nfc_find_se(hdev->ndev, se_idx);
+
+	switch (se->type) {
+	case NFC_SE_UICC:
+		while (count--) {
+			r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE,
+					PN544_WRITE, (u8 *)p, 4, &res_skb);
+			if (r < 0)
+				return r;
+
+			if (res_skb->len != 1) {
+				kfree_skb(res_skb);
+				return -EPROTO;
+			}
+
+			if (res_skb->data[0] != p->value) {
+				kfree_skb(res_skb);
+				return -EIO;
+			}
+
+			kfree_skb(res_skb);
+
+			p++;
+		}
+
+		return nfc_hci_set_param(hdev, PN544_SWP_MGMT_GATE,
+			      PN544_SWP_DEFAULT_MODE, &enable, 1);
+	case NFC_SE_EMBEDDED:
+		return nfc_hci_set_param(hdev, PN544_NFC_WI_MGMT_GATE,
+			      PN544_NFC_ESE_DEFAULT_MODE, &enable, 1);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int pn544_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx)
+{
+	struct nfc_se *se;
+	u8 disable = PN544_SE_MODE_OFF;
+
+	se = nfc_find_se(hdev->ndev, se_idx);
+
+	switch (se->type) {
+	case NFC_SE_UICC:
+		return nfc_hci_set_param(hdev, PN544_SWP_MGMT_GATE,
+			      PN544_SWP_DEFAULT_MODE, &disable, 1);
+	case NFC_SE_EMBEDDED:
+		return nfc_hci_set_param(hdev, PN544_NFC_WI_MGMT_GATE,
+			      PN544_NFC_ESE_DEFAULT_MODE, &disable, 1);
+	default:
+		return -EINVAL;
+	}
+}
+
+static struct nfc_hci_ops pn544_hci_ops = {
+	.open = pn544_hci_open,
+	.close = pn544_hci_close,
+	.hci_ready = pn544_hci_ready,
+	.xmit = pn544_hci_xmit,
+	.start_poll = pn544_hci_start_poll,
+	.dep_link_up = pn544_hci_dep_link_up,
+	.dep_link_down = pn544_hci_dep_link_down,
+	.target_from_gate = pn544_hci_target_from_gate,
+	.complete_target_discovered = pn544_hci_complete_target_discovered,
+	.im_transceive = pn544_hci_im_transceive,
+	.tm_send = pn544_hci_tm_send,
+	.check_presence = pn544_hci_check_presence,
+	.event_received = pn544_hci_event_received,
+	.fw_download = pn544_hci_fw_download,
+	.discover_se = pn544_hci_discover_se,
+	.enable_se = pn544_hci_enable_se,
+	.disable_se = pn544_hci_disable_se,
+};
+
+int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
+		    int phy_headroom, int phy_tailroom, int phy_payload,
+		    fw_download_t fw_download, struct nfc_hci_dev **hdev)
+{
+	struct pn544_hci_info *info;
+	u32 protocols;
+	struct nfc_hci_init_data init_data;
+	int r;
+
+	info = kzalloc(sizeof(struct pn544_hci_info), GFP_KERNEL);
+	if (!info) {
+		r = -ENOMEM;
+		goto err_info_alloc;
+	}
+
+	info->phy_ops = phy_ops;
+	info->phy_id = phy_id;
+	info->fw_download = fw_download;
+	info->state = PN544_ST_COLD;
+	mutex_init(&info->info_lock);
+
+	init_data.gate_count = ARRAY_SIZE(pn544_gates);
+
+	memcpy(init_data.gates, pn544_gates, sizeof(pn544_gates));
+
+	/*
+	 * TODO: Session id must include the driver name + some bus addr
+	 * persistent info to discriminate 2 identical chips
+	 */
+	strcpy(init_data.session_id, "ID544HCI");
+
+	protocols = NFC_PROTO_JEWEL_MASK |
+		    NFC_PROTO_MIFARE_MASK |
+		    NFC_PROTO_FELICA_MASK |
+		    NFC_PROTO_ISO14443_MASK |
+		    NFC_PROTO_ISO14443_B_MASK |
+		    NFC_PROTO_NFC_DEP_MASK;
+
+	info->hdev = nfc_hci_allocate_device(&pn544_hci_ops, &init_data, 0,
+					     protocols, llc_name,
+					     phy_headroom + PN544_CMDS_HEADROOM,
+					     phy_tailroom, phy_payload);
+	if (!info->hdev) {
+		pr_err("Cannot allocate nfc hdev\n");
+		r = -ENOMEM;
+		goto err_alloc_hdev;
+	}
+
+	nfc_hci_set_clientdata(info->hdev, info);
+
+	r = nfc_hci_register_device(info->hdev);
+	if (r)
+		goto err_regdev;
+
+	*hdev = info->hdev;
+
+	return 0;
+
+err_regdev:
+	nfc_hci_free_device(info->hdev);
+
+err_alloc_hdev:
+	kfree(info);
+
+err_info_alloc:
+	return r;
+}
+EXPORT_SYMBOL(pn544_hci_probe);
+
+void pn544_hci_remove(struct nfc_hci_dev *hdev)
+{
+	struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	nfc_hci_unregister_device(hdev);
+	nfc_hci_free_device(hdev);
+	kfree(info);
+}
+EXPORT_SYMBOL(pn544_hci_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/pn544/pn544.h b/drivers/nfc/pn544/pn544.h
new file mode 100644
index 000000000..2aa9233e8
--- /dev/null
+++ b/drivers/nfc/pn544/pn544.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2011 - 2012  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_PN544_H_
+#define __LOCAL_PN544_H_
+
+#include <net/nfc/hci.h>
+
+#define DRIVER_DESC "HCI NFC driver for PN544"
+
+#define PN544_HCI_MODE 0
+#define PN544_FW_MODE 1
+
+typedef int (*fw_download_t)(void *context, const char *firmware_name,
+				u8 hw_variant);
+
+int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
+		    int phy_headroom, int phy_tailroom, int phy_payload,
+		    fw_download_t fw_download, struct nfc_hci_dev **hdev);
+void pn544_hci_remove(struct nfc_hci_dev *hdev);
+
+#endif /* __LOCAL_PN544_H_ */
diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c
new file mode 100644
index 000000000..bc680b8be
--- /dev/null
+++ b/drivers/nfc/port100.c
@@ -0,0 +1,1663 @@
+/*
+ * Sony NFC Port-100 Series driver
+ * Copyright (c) 2013, Intel Corporation.
+ *
+ * Partly based/Inspired by Stephen Tiedemann's nfcpy
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <net/nfc/digital.h>
+
+#define VERSION "0.1"
+
+#define SONY_VENDOR_ID		0x054c
+#define RCS380S_PRODUCT_ID	0x06c1
+#define RCS380P_PRODUCT_ID	0x06c3
+
+#define PORT100_PROTOCOLS (NFC_PROTO_JEWEL_MASK    | \
+			   NFC_PROTO_MIFARE_MASK   | \
+			   NFC_PROTO_FELICA_MASK   | \
+			   NFC_PROTO_NFC_DEP_MASK  | \
+			   NFC_PROTO_ISO14443_MASK | \
+			   NFC_PROTO_ISO14443_B_MASK)
+
+#define PORT100_CAPABILITIES (NFC_DIGITAL_DRV_CAPS_IN_CRC | \
+			      NFC_DIGITAL_DRV_CAPS_TG_CRC)
+
+/* Standard port100 frame definitions */
+#define PORT100_FRAME_HEADER_LEN (sizeof(struct port100_frame) \
+				  + 2) /* data[0] CC, data[1] SCC */
+#define PORT100_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/
+
+#define PORT100_COMM_RF_HEAD_MAX_LEN (sizeof(struct port100_tg_comm_rf_cmd))
+
+/*
+ * Max extended frame payload len, excluding CC and SCC
+ * which are already in PORT100_FRAME_HEADER_LEN.
+ */
+#define PORT100_FRAME_MAX_PAYLOAD_LEN 1001
+
+#define PORT100_FRAME_ACK_SIZE 6 /* Preamble (1), SoPC (2), ACK Code (2),
+				    Postamble (1) */
+static u8 ack_frame[PORT100_FRAME_ACK_SIZE] = {
+	0x00, 0x00, 0xff, 0x00, 0xff, 0x00
+};
+
+#define PORT100_FRAME_CHECKSUM(f) (f->data[le16_to_cpu(f->datalen)])
+#define PORT100_FRAME_POSTAMBLE(f) (f->data[le16_to_cpu(f->datalen) + 1])
+
+/* start of frame */
+#define PORT100_FRAME_SOF	0x00FF
+#define PORT100_FRAME_EXT	0xFFFF
+#define PORT100_FRAME_ACK	0x00FF
+
+/* Port-100 command: in or out */
+#define PORT100_FRAME_DIRECTION(f) (f->data[0]) /* CC */
+#define PORT100_FRAME_DIR_OUT 0xD6
+#define PORT100_FRAME_DIR_IN  0xD7
+
+/* Port-100 sub-command */
+#define PORT100_FRAME_CMD(f) (f->data[1]) /* SCC */
+
+#define PORT100_CMD_GET_FIRMWARE_VERSION 0x20
+#define PORT100_CMD_GET_COMMAND_TYPE     0x28
+#define PORT100_CMD_SET_COMMAND_TYPE     0x2A
+
+#define PORT100_CMD_IN_SET_RF       0x00
+#define PORT100_CMD_IN_SET_PROTOCOL 0x02
+#define PORT100_CMD_IN_COMM_RF      0x04
+
+#define PORT100_CMD_TG_SET_RF       0x40
+#define PORT100_CMD_TG_SET_PROTOCOL 0x42
+#define PORT100_CMD_TG_SET_RF_OFF   0x46
+#define PORT100_CMD_TG_COMM_RF      0x48
+
+#define PORT100_CMD_SWITCH_RF       0x06
+
+#define PORT100_CMD_RESPONSE(cmd) (cmd + 1)
+
+#define PORT100_CMD_TYPE_IS_SUPPORTED(mask, cmd_type) \
+	((mask) & (0x01 << (cmd_type)))
+#define PORT100_CMD_TYPE_0	0
+#define PORT100_CMD_TYPE_1	1
+
+#define PORT100_CMD_STATUS_OK      0x00
+#define PORT100_CMD_STATUS_TIMEOUT 0x80
+
+#define PORT100_MDAA_TGT_HAS_BEEN_ACTIVATED_MASK 0x01
+#define PORT100_MDAA_TGT_WAS_ACTIVATED_MASK      0x02
+
+struct port100;
+
+typedef void (*port100_send_async_complete_t)(struct port100 *dev, void *arg,
+					      struct sk_buff *resp);
+
+/**
+ * Setting sets structure for in_set_rf command
+ *
+ * @in_*_set_number: Represent the entry indexes in the port-100 RF Base Table.
+ *              This table contains multiple RF setting sets required for RF
+ *              communication.
+ *
+ * @in_*_comm_type: Theses fields set the communication type to be used.
+ */
+struct port100_in_rf_setting {
+	u8 in_send_set_number;
+	u8 in_send_comm_type;
+	u8 in_recv_set_number;
+	u8 in_recv_comm_type;
+} __packed;
+
+#define PORT100_COMM_TYPE_IN_212F 0x01
+#define PORT100_COMM_TYPE_IN_424F 0x02
+#define PORT100_COMM_TYPE_IN_106A 0x03
+#define PORT100_COMM_TYPE_IN_106B 0x07
+
+static const struct port100_in_rf_setting in_rf_settings[] = {
+	[NFC_DIGITAL_RF_TECH_212F] = {
+		.in_send_set_number = 1,
+		.in_send_comm_type  = PORT100_COMM_TYPE_IN_212F,
+		.in_recv_set_number = 15,
+		.in_recv_comm_type  = PORT100_COMM_TYPE_IN_212F,
+	},
+	[NFC_DIGITAL_RF_TECH_424F] = {
+		.in_send_set_number = 1,
+		.in_send_comm_type  = PORT100_COMM_TYPE_IN_424F,
+		.in_recv_set_number = 15,
+		.in_recv_comm_type  = PORT100_COMM_TYPE_IN_424F,
+	},
+	[NFC_DIGITAL_RF_TECH_106A] = {
+		.in_send_set_number = 2,
+		.in_send_comm_type  = PORT100_COMM_TYPE_IN_106A,
+		.in_recv_set_number = 15,
+		.in_recv_comm_type  = PORT100_COMM_TYPE_IN_106A,
+	},
+	[NFC_DIGITAL_RF_TECH_106B] = {
+		.in_send_set_number = 3,
+		.in_send_comm_type  = PORT100_COMM_TYPE_IN_106B,
+		.in_recv_set_number = 15,
+		.in_recv_comm_type  = PORT100_COMM_TYPE_IN_106B,
+	},
+	/* Ensures the array has NFC_DIGITAL_RF_TECH_LAST elements */
+	[NFC_DIGITAL_RF_TECH_LAST] = { 0 },
+};
+
+/**
+ * Setting sets structure for tg_set_rf command
+ *
+ * @tg_set_number: Represents the entry index in the port-100 RF Base Table.
+ *                 This table contains multiple RF setting sets required for RF
+ *                 communication. this field is used for both send and receive
+ *                 settings.
+ *
+ * @tg_comm_type: Sets the communication type to be used to send and receive
+ *                data.
+ */
+struct port100_tg_rf_setting {
+	u8 tg_set_number;
+	u8 tg_comm_type;
+} __packed;
+
+#define PORT100_COMM_TYPE_TG_106A 0x0B
+#define PORT100_COMM_TYPE_TG_212F 0x0C
+#define PORT100_COMM_TYPE_TG_424F 0x0D
+
+static const struct port100_tg_rf_setting tg_rf_settings[] = {
+	[NFC_DIGITAL_RF_TECH_106A] = {
+		.tg_set_number = 8,
+		.tg_comm_type = PORT100_COMM_TYPE_TG_106A,
+	},
+	[NFC_DIGITAL_RF_TECH_212F] = {
+		.tg_set_number = 8,
+		.tg_comm_type = PORT100_COMM_TYPE_TG_212F,
+	},
+	[NFC_DIGITAL_RF_TECH_424F] = {
+		.tg_set_number = 8,
+		.tg_comm_type = PORT100_COMM_TYPE_TG_424F,
+	},
+	/* Ensures the array has NFC_DIGITAL_RF_TECH_LAST elements */
+	[NFC_DIGITAL_RF_TECH_LAST] = { 0 },
+
+};
+
+#define PORT100_IN_PROT_INITIAL_GUARD_TIME      0x00
+#define PORT100_IN_PROT_ADD_CRC                 0x01
+#define PORT100_IN_PROT_CHECK_CRC               0x02
+#define PORT100_IN_PROT_MULTI_CARD              0x03
+#define PORT100_IN_PROT_ADD_PARITY              0x04
+#define PORT100_IN_PROT_CHECK_PARITY            0x05
+#define PORT100_IN_PROT_BITWISE_AC_RECV_MODE    0x06
+#define PORT100_IN_PROT_VALID_BIT_NUMBER        0x07
+#define PORT100_IN_PROT_CRYPTO1                 0x08
+#define PORT100_IN_PROT_ADD_SOF                 0x09
+#define PORT100_IN_PROT_CHECK_SOF               0x0A
+#define PORT100_IN_PROT_ADD_EOF                 0x0B
+#define PORT100_IN_PROT_CHECK_EOF               0x0C
+#define PORT100_IN_PROT_DEAF_TIME               0x0E
+#define PORT100_IN_PROT_CRM                     0x0F
+#define PORT100_IN_PROT_CRM_MIN_LEN             0x10
+#define PORT100_IN_PROT_T1_TAG_FRAME            0x11
+#define PORT100_IN_PROT_RFCA                    0x12
+#define PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR 0x13
+#define PORT100_IN_PROT_END                     0x14
+
+#define PORT100_IN_MAX_NUM_PROTOCOLS            19
+
+#define PORT100_TG_PROT_TU           0x00
+#define PORT100_TG_PROT_RF_OFF       0x01
+#define PORT100_TG_PROT_CRM          0x02
+#define PORT100_TG_PROT_END          0x03
+
+#define PORT100_TG_MAX_NUM_PROTOCOLS 3
+
+struct port100_protocol {
+	u8 number;
+	u8 value;
+} __packed;
+
+static struct port100_protocol
+in_protocols[][PORT100_IN_MAX_NUM_PROTOCOLS + 1] = {
+	[NFC_DIGITAL_FRAMING_NFCA_SHORT] = {
+		{ PORT100_IN_PROT_INITIAL_GUARD_TIME,      6 },
+		{ PORT100_IN_PROT_ADD_CRC,                 0 },
+		{ PORT100_IN_PROT_CHECK_CRC,               0 },
+		{ PORT100_IN_PROT_MULTI_CARD,              0 },
+		{ PORT100_IN_PROT_ADD_PARITY,              0 },
+		{ PORT100_IN_PROT_CHECK_PARITY,            1 },
+		{ PORT100_IN_PROT_BITWISE_AC_RECV_MODE,    0 },
+		{ PORT100_IN_PROT_VALID_BIT_NUMBER,        7 },
+		{ PORT100_IN_PROT_CRYPTO1,                 0 },
+		{ PORT100_IN_PROT_ADD_SOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_SOF,               0 },
+		{ PORT100_IN_PROT_ADD_EOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_EOF,               0 },
+		{ PORT100_IN_PROT_DEAF_TIME,               4 },
+		{ PORT100_IN_PROT_CRM,                     0 },
+		{ PORT100_IN_PROT_CRM_MIN_LEN,             0 },
+		{ PORT100_IN_PROT_T1_TAG_FRAME,            0 },
+		{ PORT100_IN_PROT_RFCA,                    0 },
+		{ PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 },
+		{ PORT100_IN_PROT_END,                     0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCA_STANDARD] = {
+		{ PORT100_IN_PROT_INITIAL_GUARD_TIME,      6 },
+		{ PORT100_IN_PROT_ADD_CRC,                 0 },
+		{ PORT100_IN_PROT_CHECK_CRC,               0 },
+		{ PORT100_IN_PROT_MULTI_CARD,              0 },
+		{ PORT100_IN_PROT_ADD_PARITY,              1 },
+		{ PORT100_IN_PROT_CHECK_PARITY,            1 },
+		{ PORT100_IN_PROT_BITWISE_AC_RECV_MODE,    0 },
+		{ PORT100_IN_PROT_VALID_BIT_NUMBER,        8 },
+		{ PORT100_IN_PROT_CRYPTO1,                 0 },
+		{ PORT100_IN_PROT_ADD_SOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_SOF,               0 },
+		{ PORT100_IN_PROT_ADD_EOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_EOF,               0 },
+		{ PORT100_IN_PROT_DEAF_TIME,               4 },
+		{ PORT100_IN_PROT_CRM,                     0 },
+		{ PORT100_IN_PROT_CRM_MIN_LEN,             0 },
+		{ PORT100_IN_PROT_T1_TAG_FRAME,            0 },
+		{ PORT100_IN_PROT_RFCA,                    0 },
+		{ PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 },
+		{ PORT100_IN_PROT_END,                     0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A] = {
+		{ PORT100_IN_PROT_INITIAL_GUARD_TIME,      6 },
+		{ PORT100_IN_PROT_ADD_CRC,                 1 },
+		{ PORT100_IN_PROT_CHECK_CRC,               1 },
+		{ PORT100_IN_PROT_MULTI_CARD,              0 },
+		{ PORT100_IN_PROT_ADD_PARITY,              1 },
+		{ PORT100_IN_PROT_CHECK_PARITY,            1 },
+		{ PORT100_IN_PROT_BITWISE_AC_RECV_MODE,    0 },
+		{ PORT100_IN_PROT_VALID_BIT_NUMBER,        8 },
+		{ PORT100_IN_PROT_CRYPTO1,                 0 },
+		{ PORT100_IN_PROT_ADD_SOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_SOF,               0 },
+		{ PORT100_IN_PROT_ADD_EOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_EOF,               0 },
+		{ PORT100_IN_PROT_DEAF_TIME,               4 },
+		{ PORT100_IN_PROT_CRM,                     0 },
+		{ PORT100_IN_PROT_CRM_MIN_LEN,             0 },
+		{ PORT100_IN_PROT_T1_TAG_FRAME,            0 },
+		{ PORT100_IN_PROT_RFCA,                    0 },
+		{ PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 },
+		{ PORT100_IN_PROT_END,                     0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCA_T1T] = {
+		/* nfc_digital_framing_nfca_short */
+		{ PORT100_IN_PROT_ADD_CRC,          2 },
+		{ PORT100_IN_PROT_CHECK_CRC,        2 },
+		{ PORT100_IN_PROT_VALID_BIT_NUMBER, 8 },
+		{ PORT100_IN_PROT_T1_TAG_FRAME,     2 },
+		{ PORT100_IN_PROT_END,              0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCA_T2T] = {
+		/* nfc_digital_framing_nfca_standard */
+		{ PORT100_IN_PROT_ADD_CRC,   1 },
+		{ PORT100_IN_PROT_CHECK_CRC, 0 },
+		{ PORT100_IN_PROT_END,       0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCA_T4T] = {
+		/* nfc_digital_framing_nfca_standard_with_crc_a */
+		{ PORT100_IN_PROT_END,       0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCA_NFC_DEP] = {
+		/* nfc_digital_framing_nfca_standard */
+		{ PORT100_IN_PROT_END, 0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCF] = {
+		{ PORT100_IN_PROT_INITIAL_GUARD_TIME,     18 },
+		{ PORT100_IN_PROT_ADD_CRC,                 1 },
+		{ PORT100_IN_PROT_CHECK_CRC,               1 },
+		{ PORT100_IN_PROT_MULTI_CARD,              0 },
+		{ PORT100_IN_PROT_ADD_PARITY,              0 },
+		{ PORT100_IN_PROT_CHECK_PARITY,            0 },
+		{ PORT100_IN_PROT_BITWISE_AC_RECV_MODE,    0 },
+		{ PORT100_IN_PROT_VALID_BIT_NUMBER,        8 },
+		{ PORT100_IN_PROT_CRYPTO1,                 0 },
+		{ PORT100_IN_PROT_ADD_SOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_SOF,               0 },
+		{ PORT100_IN_PROT_ADD_EOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_EOF,               0 },
+		{ PORT100_IN_PROT_DEAF_TIME,               4 },
+		{ PORT100_IN_PROT_CRM,                     0 },
+		{ PORT100_IN_PROT_CRM_MIN_LEN,             0 },
+		{ PORT100_IN_PROT_T1_TAG_FRAME,            0 },
+		{ PORT100_IN_PROT_RFCA,                    0 },
+		{ PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 },
+		{ PORT100_IN_PROT_END,                     0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCF_T3T] = {
+		/* nfc_digital_framing_nfcf */
+		{ PORT100_IN_PROT_END, 0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCF_NFC_DEP] = {
+		/* nfc_digital_framing_nfcf */
+		{ PORT100_IN_PROT_INITIAL_GUARD_TIME,     18 },
+		{ PORT100_IN_PROT_ADD_CRC,                 1 },
+		{ PORT100_IN_PROT_CHECK_CRC,               1 },
+		{ PORT100_IN_PROT_MULTI_CARD,              0 },
+		{ PORT100_IN_PROT_ADD_PARITY,              0 },
+		{ PORT100_IN_PROT_CHECK_PARITY,            0 },
+		{ PORT100_IN_PROT_BITWISE_AC_RECV_MODE,    0 },
+		{ PORT100_IN_PROT_VALID_BIT_NUMBER,        8 },
+		{ PORT100_IN_PROT_CRYPTO1,                 0 },
+		{ PORT100_IN_PROT_ADD_SOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_SOF,               0 },
+		{ PORT100_IN_PROT_ADD_EOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_EOF,               0 },
+		{ PORT100_IN_PROT_DEAF_TIME,               4 },
+		{ PORT100_IN_PROT_CRM,                     0 },
+		{ PORT100_IN_PROT_CRM_MIN_LEN,             0 },
+		{ PORT100_IN_PROT_T1_TAG_FRAME,            0 },
+		{ PORT100_IN_PROT_RFCA,                    0 },
+		{ PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 },
+		{ PORT100_IN_PROT_END,                     0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED] = {
+		{ PORT100_IN_PROT_END, 0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCB] = {
+		{ PORT100_IN_PROT_INITIAL_GUARD_TIME,     20 },
+		{ PORT100_IN_PROT_ADD_CRC,                 1 },
+		{ PORT100_IN_PROT_CHECK_CRC,               1 },
+		{ PORT100_IN_PROT_MULTI_CARD,              0 },
+		{ PORT100_IN_PROT_ADD_PARITY,              0 },
+		{ PORT100_IN_PROT_CHECK_PARITY,            0 },
+		{ PORT100_IN_PROT_BITWISE_AC_RECV_MODE,    0 },
+		{ PORT100_IN_PROT_VALID_BIT_NUMBER,        8 },
+		{ PORT100_IN_PROT_CRYPTO1,                 0 },
+		{ PORT100_IN_PROT_ADD_SOF,                 1 },
+		{ PORT100_IN_PROT_CHECK_SOF,               1 },
+		{ PORT100_IN_PROT_ADD_EOF,                 1 },
+		{ PORT100_IN_PROT_CHECK_EOF,               1 },
+		{ PORT100_IN_PROT_DEAF_TIME,               4 },
+		{ PORT100_IN_PROT_CRM,                     0 },
+		{ PORT100_IN_PROT_CRM_MIN_LEN,             0 },
+		{ PORT100_IN_PROT_T1_TAG_FRAME,            0 },
+		{ PORT100_IN_PROT_RFCA,                    0 },
+		{ PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 },
+		{ PORT100_IN_PROT_END,                     0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCB_T4T] = {
+		/* nfc_digital_framing_nfcb */
+		{ PORT100_IN_PROT_END,                     0 },
+	},
+	/* Ensures the array has NFC_DIGITAL_FRAMING_LAST elements */
+	[NFC_DIGITAL_FRAMING_LAST] = {
+		{ PORT100_IN_PROT_END, 0 },
+	},
+};
+
+static struct port100_protocol
+tg_protocols[][PORT100_TG_MAX_NUM_PROTOCOLS + 1] = {
+	[NFC_DIGITAL_FRAMING_NFCA_SHORT] = {
+		{ PORT100_TG_PROT_END, 0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCA_STANDARD] = {
+		{ PORT100_TG_PROT_END, 0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A] = {
+		{ PORT100_TG_PROT_END, 0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCA_T1T] = {
+		{ PORT100_TG_PROT_END, 0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCA_T2T] = {
+		{ PORT100_TG_PROT_END, 0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCA_NFC_DEP] = {
+		{ PORT100_TG_PROT_TU,     1 },
+		{ PORT100_TG_PROT_RF_OFF, 0 },
+		{ PORT100_TG_PROT_CRM,    7 },
+		{ PORT100_TG_PROT_END,    0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCF] = {
+		{ PORT100_TG_PROT_END, 0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCF_T3T] = {
+		{ PORT100_TG_PROT_END, 0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFCF_NFC_DEP] = {
+		{ PORT100_TG_PROT_TU,     1 },
+		{ PORT100_TG_PROT_RF_OFF, 0 },
+		{ PORT100_TG_PROT_CRM,    7 },
+		{ PORT100_TG_PROT_END,    0 },
+	},
+	[NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED] = {
+		{ PORT100_TG_PROT_RF_OFF, 1 },
+		{ PORT100_TG_PROT_END,    0 },
+	},
+	/* Ensures the array has NFC_DIGITAL_FRAMING_LAST elements */
+	[NFC_DIGITAL_FRAMING_LAST] = {
+		{ PORT100_TG_PROT_END,    0 },
+	},
+};
+
+struct port100 {
+	struct nfc_digital_dev *nfc_digital_dev;
+
+	int skb_headroom;
+	int skb_tailroom;
+
+	struct usb_device *udev;
+	struct usb_interface *interface;
+
+	struct urb *out_urb;
+	struct urb *in_urb;
+
+	/* This mutex protects the out_urb and avoids to submit a new command
+	 * through port100_send_frame_async() while the previous one is being
+	 * canceled through port100_abort_cmd().
+	 */
+	struct mutex out_urb_lock;
+
+	struct work_struct cmd_complete_work;
+
+	u8 cmd_type;
+
+	/* The digital stack serializes commands to be sent. There is no need
+	 * for any queuing/locking mechanism at driver level.
+	 */
+	struct port100_cmd *cmd;
+
+	bool cmd_cancel;
+	struct completion cmd_cancel_done;
+};
+
+struct port100_cmd {
+	u8 code;
+	int status;
+	struct sk_buff *req;
+	struct sk_buff *resp;
+	int resp_len;
+	port100_send_async_complete_t  complete_cb;
+	void *complete_cb_context;
+};
+
+struct port100_frame {
+	u8 preamble;
+	__be16 start_frame;
+	__be16 extended_frame;
+	__le16 datalen;
+	u8 datalen_checksum;
+	u8 data[];
+} __packed;
+
+struct port100_ack_frame {
+	u8 preamble;
+	__be16 start_frame;
+	__be16 ack_frame;
+	u8 postambule;
+} __packed;
+
+struct port100_cb_arg {
+	nfc_digital_cmd_complete_t complete_cb;
+	void *complete_arg;
+	u8 mdaa;
+};
+
+struct port100_tg_comm_rf_cmd {
+	__le16 guard_time;
+	__le16 send_timeout;
+	u8 mdaa;
+	u8 nfca_param[6];
+	u8 nfcf_param[18];
+	u8 mf_halted;
+	u8 arae_flag;
+	__le16 recv_timeout;
+	u8 data[];
+} __packed;
+
+struct port100_tg_comm_rf_res {
+	u8 comm_type;
+	u8 ar_status;
+	u8 target_activated;
+	__le32 status;
+	u8 data[];
+} __packed;
+
+/* The rule: value + checksum = 0 */
+static inline u8 port100_checksum(u16 value)
+{
+	return ~(((u8 *)&value)[0] + ((u8 *)&value)[1]) + 1;
+}
+
+/* The rule: sum(data elements) + checksum = 0 */
+static u8 port100_data_checksum(u8 *data, int datalen)
+{
+	u8 sum = 0;
+	int i;
+
+	for (i = 0; i < datalen; i++)
+		sum += data[i];
+
+	return port100_checksum(sum);
+}
+
+static void port100_tx_frame_init(void *_frame, u8 cmd_code)
+{
+	struct port100_frame *frame = _frame;
+
+	frame->preamble = 0;
+	frame->start_frame = cpu_to_be16(PORT100_FRAME_SOF);
+	frame->extended_frame = cpu_to_be16(PORT100_FRAME_EXT);
+	PORT100_FRAME_DIRECTION(frame) = PORT100_FRAME_DIR_OUT;
+	PORT100_FRAME_CMD(frame) = cmd_code;
+	frame->datalen = cpu_to_le16(2);
+}
+
+static void port100_tx_frame_finish(void *_frame)
+{
+	struct port100_frame *frame = _frame;
+
+	frame->datalen_checksum = port100_checksum(le16_to_cpu(frame->datalen));
+
+	PORT100_FRAME_CHECKSUM(frame) =
+		port100_data_checksum(frame->data, le16_to_cpu(frame->datalen));
+
+	PORT100_FRAME_POSTAMBLE(frame) = 0;
+}
+
+static void port100_tx_update_payload_len(void *_frame, int len)
+{
+	struct port100_frame *frame = _frame;
+
+	le16_add_cpu(&frame->datalen, len);
+}
+
+static bool port100_rx_frame_is_valid(void *_frame)
+{
+	u8 checksum;
+	struct port100_frame *frame = _frame;
+
+	if (frame->start_frame != cpu_to_be16(PORT100_FRAME_SOF) ||
+	    frame->extended_frame != cpu_to_be16(PORT100_FRAME_EXT))
+		return false;
+
+	checksum = port100_checksum(le16_to_cpu(frame->datalen));
+	if (checksum != frame->datalen_checksum)
+		return false;
+
+	checksum = port100_data_checksum(frame->data,
+					 le16_to_cpu(frame->datalen));
+	if (checksum != PORT100_FRAME_CHECKSUM(frame))
+		return false;
+
+	return true;
+}
+
+static bool port100_rx_frame_is_ack(struct port100_ack_frame *frame)
+{
+	return (frame->start_frame == cpu_to_be16(PORT100_FRAME_SOF) &&
+		frame->ack_frame == cpu_to_be16(PORT100_FRAME_ACK));
+}
+
+static inline int port100_rx_frame_size(void *frame)
+{
+	struct port100_frame *f = frame;
+
+	return sizeof(struct port100_frame) + le16_to_cpu(f->datalen) +
+	       PORT100_FRAME_TAIL_LEN;
+}
+
+static bool port100_rx_frame_is_cmd_response(struct port100 *dev, void *frame)
+{
+	struct port100_frame *f = frame;
+
+	return (PORT100_FRAME_CMD(f) == PORT100_CMD_RESPONSE(dev->cmd->code));
+}
+
+static void port100_recv_response(struct urb *urb)
+{
+	struct port100 *dev = urb->context;
+	struct port100_cmd *cmd = dev->cmd;
+	u8 *in_frame;
+
+	cmd->status = urb->status;
+
+	switch (urb->status) {
+	case 0:
+		break; /* success */
+	case -ECONNRESET:
+	case -ENOENT:
+		nfc_err(&dev->interface->dev,
+			"The urb has been canceled (status %d)\n", urb->status);
+		goto sched_wq;
+	case -ESHUTDOWN:
+	default:
+		nfc_err(&dev->interface->dev, "Urb failure (status %d)\n",
+			urb->status);
+		goto sched_wq;
+	}
+
+	in_frame = dev->in_urb->transfer_buffer;
+
+	if (!port100_rx_frame_is_valid(in_frame)) {
+		nfc_err(&dev->interface->dev, "Received an invalid frame\n");
+		cmd->status = -EIO;
+		goto sched_wq;
+	}
+
+	print_hex_dump_debug("PORT100 RX: ", DUMP_PREFIX_NONE, 16, 1, in_frame,
+			     port100_rx_frame_size(in_frame), false);
+
+	if (!port100_rx_frame_is_cmd_response(dev, in_frame)) {
+		nfc_err(&dev->interface->dev,
+			"It's not the response to the last command\n");
+		cmd->status = -EIO;
+		goto sched_wq;
+	}
+
+sched_wq:
+	schedule_work(&dev->cmd_complete_work);
+}
+
+static int port100_submit_urb_for_response(struct port100 *dev, gfp_t flags)
+{
+	dev->in_urb->complete = port100_recv_response;
+
+	return usb_submit_urb(dev->in_urb, flags);
+}
+
+static void port100_recv_ack(struct urb *urb)
+{
+	struct port100 *dev = urb->context;
+	struct port100_cmd *cmd = dev->cmd;
+	struct port100_ack_frame *in_frame;
+	int rc;
+
+	cmd->status = urb->status;
+
+	switch (urb->status) {
+	case 0:
+		break; /* success */
+	case -ECONNRESET:
+	case -ENOENT:
+		nfc_err(&dev->interface->dev,
+			"The urb has been stopped (status %d)\n", urb->status);
+		goto sched_wq;
+	case -ESHUTDOWN:
+	default:
+		nfc_err(&dev->interface->dev, "Urb failure (status %d)\n",
+			urb->status);
+		goto sched_wq;
+	}
+
+	in_frame = dev->in_urb->transfer_buffer;
+
+	if (!port100_rx_frame_is_ack(in_frame)) {
+		nfc_err(&dev->interface->dev, "Received an invalid ack\n");
+		cmd->status = -EIO;
+		goto sched_wq;
+	}
+
+	rc = port100_submit_urb_for_response(dev, GFP_ATOMIC);
+	if (rc) {
+		nfc_err(&dev->interface->dev,
+			"usb_submit_urb failed with result %d\n", rc);
+		cmd->status = rc;
+		goto sched_wq;
+	}
+
+	return;
+
+sched_wq:
+	schedule_work(&dev->cmd_complete_work);
+}
+
+static int port100_submit_urb_for_ack(struct port100 *dev, gfp_t flags)
+{
+	dev->in_urb->complete = port100_recv_ack;
+
+	return usb_submit_urb(dev->in_urb, flags);
+}
+
+static int port100_send_ack(struct port100 *dev)
+{
+	int rc = 0;
+
+	mutex_lock(&dev->out_urb_lock);
+
+	/*
+	 * If prior cancel is in-flight (dev->cmd_cancel == true), we
+	 * can skip to send cancel. Then this will wait the prior
+	 * cancel, or merged into the next cancel rarely if next
+	 * cancel was started before waiting done. In any case, this
+	 * will be waked up soon or later.
+	 */
+	if (!dev->cmd_cancel) {
+		reinit_completion(&dev->cmd_cancel_done);
+
+		usb_kill_urb(dev->out_urb);
+
+		dev->out_urb->transfer_buffer = ack_frame;
+		dev->out_urb->transfer_buffer_length = sizeof(ack_frame);
+		rc = usb_submit_urb(dev->out_urb, GFP_KERNEL);
+
+		/*
+		 * Set the cmd_cancel flag only if the URB has been
+		 * successfully submitted. It will be reset by the out
+		 * URB completion callback port100_send_complete().
+		 */
+		dev->cmd_cancel = !rc;
+	}
+
+	mutex_unlock(&dev->out_urb_lock);
+
+	if (!rc)
+		wait_for_completion(&dev->cmd_cancel_done);
+
+	return rc;
+}
+
+static int port100_send_frame_async(struct port100 *dev, struct sk_buff *out,
+				    struct sk_buff *in, int in_len)
+{
+	int rc;
+
+	mutex_lock(&dev->out_urb_lock);
+
+	/* A command cancel frame as been sent through dev->out_urb. Don't try
+	 * to submit a new one.
+	 */
+	if (dev->cmd_cancel) {
+		rc = -EAGAIN;
+		goto exit;
+	}
+
+	dev->out_urb->transfer_buffer = out->data;
+	dev->out_urb->transfer_buffer_length = out->len;
+
+	dev->in_urb->transfer_buffer = in->data;
+	dev->in_urb->transfer_buffer_length = in_len;
+
+	print_hex_dump_debug("PORT100 TX: ", DUMP_PREFIX_NONE, 16, 1,
+			     out->data, out->len, false);
+
+	rc = usb_submit_urb(dev->out_urb, GFP_KERNEL);
+	if (rc)
+		goto exit;
+
+	rc = port100_submit_urb_for_ack(dev, GFP_KERNEL);
+	if (rc)
+		usb_kill_urb(dev->out_urb);
+
+exit:
+	mutex_unlock(&dev->out_urb_lock);
+
+	return rc;
+}
+
+static void port100_build_cmd_frame(struct port100 *dev, u8 cmd_code,
+				    struct sk_buff *skb)
+{
+	/* payload is already there, just update datalen */
+	int payload_len = skb->len;
+
+	skb_push(skb, PORT100_FRAME_HEADER_LEN);
+	skb_put(skb, PORT100_FRAME_TAIL_LEN);
+
+	port100_tx_frame_init(skb->data, cmd_code);
+	port100_tx_update_payload_len(skb->data, payload_len);
+	port100_tx_frame_finish(skb->data);
+}
+
+static void port100_send_async_complete(struct port100 *dev)
+{
+	struct port100_cmd *cmd = dev->cmd;
+	int status = cmd->status;
+
+	struct sk_buff *req = cmd->req;
+	struct sk_buff *resp = cmd->resp;
+
+	dev_kfree_skb(req);
+
+	dev->cmd = NULL;
+
+	if (status < 0) {
+		cmd->complete_cb(dev, cmd->complete_cb_context,
+				 ERR_PTR(status));
+		dev_kfree_skb(resp);
+		goto done;
+	}
+
+	skb_put(resp, port100_rx_frame_size(resp->data));
+	skb_pull(resp, PORT100_FRAME_HEADER_LEN);
+	skb_trim(resp, resp->len - PORT100_FRAME_TAIL_LEN);
+
+	cmd->complete_cb(dev, cmd->complete_cb_context, resp);
+
+done:
+	kfree(cmd);
+}
+
+static int port100_send_cmd_async(struct port100 *dev, u8 cmd_code,
+				struct sk_buff *req,
+				port100_send_async_complete_t complete_cb,
+				void *complete_cb_context)
+{
+	struct port100_cmd *cmd;
+	struct sk_buff *resp;
+	int rc;
+	int  resp_len = PORT100_FRAME_HEADER_LEN +
+			PORT100_FRAME_MAX_PAYLOAD_LEN +
+			PORT100_FRAME_TAIL_LEN;
+
+	if (dev->cmd) {
+		nfc_err(&dev->interface->dev,
+			"A command is still in process\n");
+		return -EBUSY;
+	}
+
+	resp = alloc_skb(resp_len, GFP_KERNEL);
+	if (!resp)
+		return -ENOMEM;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		dev_kfree_skb(resp);
+		return -ENOMEM;
+	}
+
+	cmd->code = cmd_code;
+	cmd->req = req;
+	cmd->resp = resp;
+	cmd->resp_len = resp_len;
+	cmd->complete_cb = complete_cb;
+	cmd->complete_cb_context = complete_cb_context;
+
+	port100_build_cmd_frame(dev, cmd_code, req);
+
+	dev->cmd = cmd;
+
+	rc = port100_send_frame_async(dev, req, resp, resp_len);
+	if (rc) {
+		kfree(cmd);
+		dev_kfree_skb(resp);
+		dev->cmd = NULL;
+	}
+
+	return rc;
+}
+
+struct port100_sync_cmd_response {
+	struct sk_buff *resp;
+	struct completion done;
+};
+
+static void port100_wq_cmd_complete(struct work_struct *work)
+{
+	struct port100 *dev = container_of(work, struct port100,
+					   cmd_complete_work);
+
+	port100_send_async_complete(dev);
+}
+
+static void port100_send_sync_complete(struct port100 *dev, void *_arg,
+				      struct sk_buff *resp)
+{
+	struct port100_sync_cmd_response *arg = _arg;
+
+	arg->resp = resp;
+	complete(&arg->done);
+}
+
+static struct sk_buff *port100_send_cmd_sync(struct port100 *dev, u8 cmd_code,
+					     struct sk_buff *req)
+{
+	int rc;
+	struct port100_sync_cmd_response arg;
+
+	init_completion(&arg.done);
+
+	rc = port100_send_cmd_async(dev, cmd_code, req,
+				    port100_send_sync_complete, &arg);
+	if (rc) {
+		dev_kfree_skb(req);
+		return ERR_PTR(rc);
+	}
+
+	wait_for_completion(&arg.done);
+
+	return arg.resp;
+}
+
+static void port100_send_complete(struct urb *urb)
+{
+	struct port100 *dev = urb->context;
+
+	if (dev->cmd_cancel) {
+		complete_all(&dev->cmd_cancel_done);
+		dev->cmd_cancel = false;
+	}
+
+	switch (urb->status) {
+	case 0:
+		break; /* success */
+	case -ECONNRESET:
+	case -ENOENT:
+		nfc_err(&dev->interface->dev,
+			"The urb has been stopped (status %d)\n", urb->status);
+		break;
+	case -ESHUTDOWN:
+	default:
+		nfc_err(&dev->interface->dev, "Urb failure (status %d)\n",
+			urb->status);
+	}
+}
+
+static void port100_abort_cmd(struct nfc_digital_dev *ddev)
+{
+	struct port100 *dev = nfc_digital_get_drvdata(ddev);
+
+	/* An ack will cancel the last issued command */
+	port100_send_ack(dev);
+
+	/* cancel the urb request */
+	usb_kill_urb(dev->in_urb);
+}
+
+static struct sk_buff *port100_alloc_skb(struct port100 *dev, unsigned int size)
+{
+	struct sk_buff *skb;
+
+	skb = alloc_skb(dev->skb_headroom + dev->skb_tailroom + size,
+			GFP_KERNEL);
+	if (skb)
+		skb_reserve(skb, dev->skb_headroom);
+
+	return skb;
+}
+
+static int port100_set_command_type(struct port100 *dev, u8 command_type)
+{
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+	int rc;
+
+	skb = port100_alloc_skb(dev, 1);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_u8(skb, command_type);
+
+	resp = port100_send_cmd_sync(dev, PORT100_CMD_SET_COMMAND_TYPE, skb);
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	rc = resp->data[0];
+
+	dev_kfree_skb(resp);
+
+	return rc;
+}
+
+static u64 port100_get_command_type_mask(struct port100 *dev)
+{
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+	u64 mask;
+
+	skb = port100_alloc_skb(dev, 0);
+	if (!skb)
+		return 0;
+
+	resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_COMMAND_TYPE, skb);
+	if (IS_ERR(resp))
+		return 0;
+
+	if (resp->len < 8)
+		mask = 0;
+	else
+		mask = be64_to_cpu(*(__be64 *)resp->data);
+
+	dev_kfree_skb(resp);
+
+	return mask;
+}
+
+static u16 port100_get_firmware_version(struct port100 *dev)
+{
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+	u16 fw_ver;
+
+	skb = port100_alloc_skb(dev, 0);
+	if (!skb)
+		return 0;
+
+	resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_FIRMWARE_VERSION,
+				     skb);
+	if (IS_ERR(resp))
+		return 0;
+
+	fw_ver = le16_to_cpu(*(__le16 *)resp->data);
+
+	dev_kfree_skb(resp);
+
+	return fw_ver;
+}
+
+static int port100_switch_rf(struct nfc_digital_dev *ddev, bool on)
+{
+	struct port100 *dev = nfc_digital_get_drvdata(ddev);
+	struct sk_buff *skb, *resp;
+
+	skb = port100_alloc_skb(dev, 1);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_u8(skb, on ? 1 : 0);
+
+	/* Cancel the last command if the device is being switched off */
+	if (!on)
+		port100_abort_cmd(ddev);
+
+	resp = port100_send_cmd_sync(dev, PORT100_CMD_SWITCH_RF, skb);
+
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	dev_kfree_skb(resp);
+
+	return 0;
+}
+
+static int port100_in_set_rf(struct nfc_digital_dev *ddev, u8 rf)
+{
+	struct port100 *dev = nfc_digital_get_drvdata(ddev);
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+	int rc;
+
+	if (rf >= NFC_DIGITAL_RF_TECH_LAST)
+		return -EINVAL;
+
+	skb = port100_alloc_skb(dev, sizeof(struct port100_in_rf_setting));
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_data(skb, &in_rf_settings[rf],
+		     sizeof(struct port100_in_rf_setting));
+
+	resp = port100_send_cmd_sync(dev, PORT100_CMD_IN_SET_RF, skb);
+
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	rc = resp->data[0];
+
+	dev_kfree_skb(resp);
+
+	return rc;
+}
+
+static int port100_in_set_framing(struct nfc_digital_dev *ddev, int param)
+{
+	struct port100 *dev = nfc_digital_get_drvdata(ddev);
+	struct port100_protocol *protocols;
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+	int num_protocols;
+	size_t size;
+	int rc;
+
+	if (param >= NFC_DIGITAL_FRAMING_LAST)
+		return -EINVAL;
+
+	protocols = in_protocols[param];
+
+	num_protocols = 0;
+	while (protocols[num_protocols].number != PORT100_IN_PROT_END)
+		num_protocols++;
+
+	if (!num_protocols)
+		return 0;
+
+	size = sizeof(struct port100_protocol) * num_protocols;
+
+	skb = port100_alloc_skb(dev, size);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_data(skb, protocols, size);
+
+	resp = port100_send_cmd_sync(dev, PORT100_CMD_IN_SET_PROTOCOL, skb);
+
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	rc = resp->data[0];
+
+	dev_kfree_skb(resp);
+
+	return rc;
+}
+
+static int port100_in_configure_hw(struct nfc_digital_dev *ddev, int type,
+				   int param)
+{
+	if (type == NFC_DIGITAL_CONFIG_RF_TECH)
+		return port100_in_set_rf(ddev, param);
+
+	if (type == NFC_DIGITAL_CONFIG_FRAMING)
+		return port100_in_set_framing(ddev, param);
+
+	return -EINVAL;
+}
+
+static void port100_in_comm_rf_complete(struct port100 *dev, void *arg,
+				       struct sk_buff *resp)
+{
+	struct port100_cb_arg *cb_arg = arg;
+	nfc_digital_cmd_complete_t cb = cb_arg->complete_cb;
+	u32 status;
+	int rc;
+
+	if (IS_ERR(resp)) {
+		rc =  PTR_ERR(resp);
+		goto exit;
+	}
+
+	if (resp->len < 4) {
+		nfc_err(&dev->interface->dev,
+			"Invalid packet length received\n");
+		rc = -EIO;
+		goto error;
+	}
+
+	status = le32_to_cpu(*(__le32 *)resp->data);
+
+	skb_pull(resp, sizeof(u32));
+
+	if (status == PORT100_CMD_STATUS_TIMEOUT) {
+		rc = -ETIMEDOUT;
+		goto error;
+	}
+
+	if (status != PORT100_CMD_STATUS_OK) {
+		nfc_err(&dev->interface->dev,
+			"in_comm_rf failed with status 0x%08x\n", status);
+		rc = -EIO;
+		goto error;
+	}
+
+	/* Remove collision bits byte */
+	skb_pull(resp, 1);
+
+	goto exit;
+
+error:
+	kfree_skb(resp);
+	resp = ERR_PTR(rc);
+
+exit:
+	cb(dev->nfc_digital_dev, cb_arg->complete_arg, resp);
+
+	kfree(cb_arg);
+}
+
+static int port100_in_send_cmd(struct nfc_digital_dev *ddev,
+			       struct sk_buff *skb, u16 _timeout,
+			       nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct port100 *dev = nfc_digital_get_drvdata(ddev);
+	struct port100_cb_arg *cb_arg;
+	__le16 timeout;
+
+	cb_arg = kzalloc(sizeof(struct port100_cb_arg), GFP_KERNEL);
+	if (!cb_arg)
+		return -ENOMEM;
+
+	cb_arg->complete_cb = cb;
+	cb_arg->complete_arg = arg;
+
+	timeout = cpu_to_le16(_timeout * 10);
+
+	memcpy(skb_push(skb, sizeof(__le16)), &timeout, sizeof(__le16));
+
+	return port100_send_cmd_async(dev, PORT100_CMD_IN_COMM_RF, skb,
+				      port100_in_comm_rf_complete, cb_arg);
+}
+
+static int port100_tg_set_rf(struct nfc_digital_dev *ddev, u8 rf)
+{
+	struct port100 *dev = nfc_digital_get_drvdata(ddev);
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+	int rc;
+
+	if (rf >= NFC_DIGITAL_RF_TECH_LAST)
+		return -EINVAL;
+
+	skb = port100_alloc_skb(dev, sizeof(struct port100_tg_rf_setting));
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_data(skb, &tg_rf_settings[rf],
+		     sizeof(struct port100_tg_rf_setting));
+
+	resp = port100_send_cmd_sync(dev, PORT100_CMD_TG_SET_RF, skb);
+
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	rc = resp->data[0];
+
+	dev_kfree_skb(resp);
+
+	return rc;
+}
+
+static int port100_tg_set_framing(struct nfc_digital_dev *ddev, int param)
+{
+	struct port100 *dev = nfc_digital_get_drvdata(ddev);
+	struct port100_protocol *protocols;
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+	int rc;
+	int num_protocols;
+	size_t size;
+
+	if (param >= NFC_DIGITAL_FRAMING_LAST)
+		return -EINVAL;
+
+	protocols = tg_protocols[param];
+
+	num_protocols = 0;
+	while (protocols[num_protocols].number != PORT100_TG_PROT_END)
+		num_protocols++;
+
+	if (!num_protocols)
+		return 0;
+
+	size = sizeof(struct port100_protocol) * num_protocols;
+
+	skb = port100_alloc_skb(dev, size);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_data(skb, protocols, size);
+
+	resp = port100_send_cmd_sync(dev, PORT100_CMD_TG_SET_PROTOCOL, skb);
+
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	rc = resp->data[0];
+
+	dev_kfree_skb(resp);
+
+	return rc;
+}
+
+static int port100_tg_configure_hw(struct nfc_digital_dev *ddev, int type,
+				   int param)
+{
+	if (type == NFC_DIGITAL_CONFIG_RF_TECH)
+		return port100_tg_set_rf(ddev, param);
+
+	if (type == NFC_DIGITAL_CONFIG_FRAMING)
+		return port100_tg_set_framing(ddev, param);
+
+	return -EINVAL;
+}
+
+static bool port100_tg_target_activated(struct port100 *dev, u8 tgt_activated)
+{
+	u8 mask;
+
+	switch (dev->cmd_type) {
+	case PORT100_CMD_TYPE_0:
+		mask = PORT100_MDAA_TGT_HAS_BEEN_ACTIVATED_MASK;
+		break;
+	case PORT100_CMD_TYPE_1:
+		mask = PORT100_MDAA_TGT_HAS_BEEN_ACTIVATED_MASK |
+		       PORT100_MDAA_TGT_WAS_ACTIVATED_MASK;
+		break;
+	default:
+		nfc_err(&dev->interface->dev, "Unknown command type\n");
+		return false;
+	}
+
+	return ((tgt_activated & mask) == mask);
+}
+
+static void port100_tg_comm_rf_complete(struct port100 *dev, void *arg,
+					struct sk_buff *resp)
+{
+	u32 status;
+	struct port100_cb_arg *cb_arg = arg;
+	nfc_digital_cmd_complete_t cb = cb_arg->complete_cb;
+	struct port100_tg_comm_rf_res *hdr;
+
+	if (IS_ERR(resp))
+		goto exit;
+
+	hdr = (struct port100_tg_comm_rf_res *)resp->data;
+
+	status = le32_to_cpu(hdr->status);
+
+	if (cb_arg->mdaa &&
+	    !port100_tg_target_activated(dev, hdr->target_activated)) {
+		kfree_skb(resp);
+		resp = ERR_PTR(-ETIMEDOUT);
+
+		goto exit;
+	}
+
+	skb_pull(resp, sizeof(struct port100_tg_comm_rf_res));
+
+	if (status != PORT100_CMD_STATUS_OK) {
+		kfree_skb(resp);
+
+		if (status == PORT100_CMD_STATUS_TIMEOUT)
+			resp = ERR_PTR(-ETIMEDOUT);
+		else
+			resp = ERR_PTR(-EIO);
+	}
+
+exit:
+	cb(dev->nfc_digital_dev, cb_arg->complete_arg, resp);
+
+	kfree(cb_arg);
+}
+
+static int port100_tg_send_cmd(struct nfc_digital_dev *ddev,
+			       struct sk_buff *skb, u16 timeout,
+			       nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct port100 *dev = nfc_digital_get_drvdata(ddev);
+	struct port100_tg_comm_rf_cmd *hdr;
+	struct port100_cb_arg *cb_arg;
+
+	cb_arg = kzalloc(sizeof(struct port100_cb_arg), GFP_KERNEL);
+	if (!cb_arg)
+		return -ENOMEM;
+
+	cb_arg->complete_cb = cb;
+	cb_arg->complete_arg = arg;
+
+	skb_push(skb, sizeof(struct port100_tg_comm_rf_cmd));
+
+	hdr = (struct port100_tg_comm_rf_cmd *)skb->data;
+
+	memset(hdr, 0, sizeof(struct port100_tg_comm_rf_cmd));
+	hdr->guard_time = cpu_to_le16(500);
+	hdr->send_timeout = cpu_to_le16(0xFFFF);
+	hdr->recv_timeout = cpu_to_le16(timeout);
+
+	return port100_send_cmd_async(dev, PORT100_CMD_TG_COMM_RF, skb,
+				      port100_tg_comm_rf_complete, cb_arg);
+}
+
+static int port100_listen_mdaa(struct nfc_digital_dev *ddev,
+			       struct digital_tg_mdaa_params *params,
+			       u16 timeout,
+			       nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct port100 *dev = nfc_digital_get_drvdata(ddev);
+	struct port100_tg_comm_rf_cmd *hdr;
+	struct port100_cb_arg *cb_arg;
+	struct sk_buff *skb;
+	int rc;
+
+	rc = port100_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_RF_TECH,
+				     NFC_DIGITAL_RF_TECH_106A);
+	if (rc)
+		return rc;
+
+	rc = port100_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_FRAMING,
+				     NFC_DIGITAL_FRAMING_NFCA_NFC_DEP);
+	if (rc)
+		return rc;
+
+	cb_arg = kzalloc(sizeof(struct port100_cb_arg), GFP_KERNEL);
+	if (!cb_arg)
+		return -ENOMEM;
+
+	cb_arg->complete_cb = cb;
+	cb_arg->complete_arg = arg;
+	cb_arg->mdaa = 1;
+
+	skb = port100_alloc_skb(dev, 0);
+	if (!skb) {
+		kfree(cb_arg);
+		return -ENOMEM;
+	}
+
+	skb_push(skb, sizeof(struct port100_tg_comm_rf_cmd));
+	hdr = (struct port100_tg_comm_rf_cmd *)skb->data;
+
+	memset(hdr, 0, sizeof(struct port100_tg_comm_rf_cmd));
+
+	hdr->guard_time = 0;
+	hdr->send_timeout = cpu_to_le16(0xFFFF);
+	hdr->mdaa = 1;
+	hdr->nfca_param[0] = (params->sens_res >> 8) & 0xFF;
+	hdr->nfca_param[1] = params->sens_res & 0xFF;
+	memcpy(hdr->nfca_param + 2, params->nfcid1, 3);
+	hdr->nfca_param[5] = params->sel_res;
+	memcpy(hdr->nfcf_param, params->nfcid2, 8);
+	hdr->nfcf_param[16] = (params->sc >> 8) & 0xFF;
+	hdr->nfcf_param[17] = params->sc & 0xFF;
+	hdr->recv_timeout = cpu_to_le16(timeout);
+
+	return port100_send_cmd_async(dev, PORT100_CMD_TG_COMM_RF, skb,
+				      port100_tg_comm_rf_complete, cb_arg);
+}
+
+static int port100_listen(struct nfc_digital_dev *ddev, u16 timeout,
+			  nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct port100 *dev = nfc_digital_get_drvdata(ddev);
+	struct sk_buff *skb;
+
+	skb = port100_alloc_skb(dev, 0);
+	if (!skb)
+		return -ENOMEM;
+
+	return port100_tg_send_cmd(ddev, skb, timeout, cb, arg);
+}
+
+static struct nfc_digital_ops port100_digital_ops = {
+	.in_configure_hw = port100_in_configure_hw,
+	.in_send_cmd = port100_in_send_cmd,
+
+	.tg_listen_mdaa = port100_listen_mdaa,
+	.tg_listen = port100_listen,
+	.tg_configure_hw = port100_tg_configure_hw,
+	.tg_send_cmd = port100_tg_send_cmd,
+
+	.switch_rf = port100_switch_rf,
+	.abort_cmd = port100_abort_cmd,
+};
+
+static const struct usb_device_id port100_table[] = {
+	{ USB_DEVICE(SONY_VENDOR_ID, RCS380S_PRODUCT_ID), },
+	{ USB_DEVICE(SONY_VENDOR_ID, RCS380P_PRODUCT_ID), },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, port100_table);
+
+static int port100_probe(struct usb_interface *interface,
+			 const struct usb_device_id *id)
+{
+	struct port100 *dev;
+	int rc;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	int in_endpoint;
+	int out_endpoint;
+	u16 fw_version;
+	u64 cmd_type_mask;
+	int i;
+
+	dev = devm_kzalloc(&interface->dev, sizeof(struct port100), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	mutex_init(&dev->out_urb_lock);
+	dev->udev = usb_get_dev(interface_to_usbdev(interface));
+	dev->interface = interface;
+	usb_set_intfdata(interface, dev);
+
+	in_endpoint = out_endpoint = 0;
+	iface_desc = interface->cur_altsetting;
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		endpoint = &iface_desc->endpoint[i].desc;
+
+		if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint))
+			in_endpoint = endpoint->bEndpointAddress;
+
+		if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint))
+			out_endpoint = endpoint->bEndpointAddress;
+	}
+
+	if (!in_endpoint || !out_endpoint) {
+		nfc_err(&interface->dev,
+			"Could not find bulk-in or bulk-out endpoint\n");
+		rc = -ENODEV;
+		goto error;
+	}
+
+	dev->in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	dev->out_urb = usb_alloc_urb(0, GFP_KERNEL);
+
+	if (!dev->in_urb || !dev->out_urb) {
+		nfc_err(&interface->dev, "Could not allocate USB URBs\n");
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	usb_fill_bulk_urb(dev->in_urb, dev->udev,
+			  usb_rcvbulkpipe(dev->udev, in_endpoint),
+			  NULL, 0, NULL, dev);
+	usb_fill_bulk_urb(dev->out_urb, dev->udev,
+			  usb_sndbulkpipe(dev->udev, out_endpoint),
+			  NULL, 0, port100_send_complete, dev);
+	dev->out_urb->transfer_flags = URB_ZERO_PACKET;
+
+	dev->skb_headroom = PORT100_FRAME_HEADER_LEN +
+			    PORT100_COMM_RF_HEAD_MAX_LEN;
+	dev->skb_tailroom = PORT100_FRAME_TAIL_LEN;
+
+	init_completion(&dev->cmd_cancel_done);
+	INIT_WORK(&dev->cmd_complete_work, port100_wq_cmd_complete);
+
+	/* The first thing to do with the Port-100 is to set the command type
+	 * to be used. If supported we use command type 1. 0 otherwise.
+	 */
+	cmd_type_mask = port100_get_command_type_mask(dev);
+	if (!cmd_type_mask) {
+		nfc_err(&interface->dev,
+			"Could not get supported command types\n");
+		rc = -ENODEV;
+		goto error;
+	}
+
+	if (PORT100_CMD_TYPE_IS_SUPPORTED(cmd_type_mask, PORT100_CMD_TYPE_1))
+		dev->cmd_type = PORT100_CMD_TYPE_1;
+	else
+		dev->cmd_type = PORT100_CMD_TYPE_0;
+
+	rc = port100_set_command_type(dev, dev->cmd_type);
+	if (rc) {
+		nfc_err(&interface->dev,
+			"The device does not support command type %u\n",
+			dev->cmd_type);
+		goto error;
+	}
+
+	fw_version = port100_get_firmware_version(dev);
+	if (!fw_version)
+		nfc_err(&interface->dev,
+			"Could not get device firmware version\n");
+
+	nfc_info(&interface->dev,
+		 "Sony NFC Port-100 Series attached (firmware v%x.%02x)\n",
+		 (fw_version & 0xFF00) >> 8, fw_version & 0xFF);
+
+	dev->nfc_digital_dev = nfc_digital_allocate_device(&port100_digital_ops,
+							   PORT100_PROTOCOLS,
+							   PORT100_CAPABILITIES,
+							   dev->skb_headroom,
+							   dev->skb_tailroom);
+	if (!dev->nfc_digital_dev) {
+		nfc_err(&interface->dev,
+			"Could not allocate nfc_digital_dev\n");
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	nfc_digital_set_parent_dev(dev->nfc_digital_dev, &interface->dev);
+	nfc_digital_set_drvdata(dev->nfc_digital_dev, dev);
+
+	rc = nfc_digital_register_device(dev->nfc_digital_dev);
+	if (rc) {
+		nfc_err(&interface->dev,
+			"Could not register digital device\n");
+		goto free_nfc_dev;
+	}
+
+	return 0;
+
+free_nfc_dev:
+	nfc_digital_free_device(dev->nfc_digital_dev);
+
+error:
+	usb_kill_urb(dev->in_urb);
+	usb_free_urb(dev->in_urb);
+	usb_kill_urb(dev->out_urb);
+	usb_free_urb(dev->out_urb);
+	usb_put_dev(dev->udev);
+
+	return rc;
+}
+
+static void port100_disconnect(struct usb_interface *interface)
+{
+	struct port100 *dev;
+
+	dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	nfc_digital_unregister_device(dev->nfc_digital_dev);
+	nfc_digital_free_device(dev->nfc_digital_dev);
+
+	usb_kill_urb(dev->in_urb);
+	usb_kill_urb(dev->out_urb);
+
+	usb_free_urb(dev->in_urb);
+	usb_free_urb(dev->out_urb);
+	usb_put_dev(dev->udev);
+
+	kfree(dev->cmd);
+
+	nfc_info(&interface->dev, "Sony Port-100 NFC device disconnected\n");
+}
+
+static struct usb_driver port100_driver = {
+	.name =		"port100",
+	.probe =	port100_probe,
+	.disconnect =	port100_disconnect,
+	.id_table =	port100_table,
+};
+
+module_usb_driver(port100_driver);
+
+MODULE_DESCRIPTION("NFC Port-100 series usb driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/nfc/s3fwrn5/Kconfig b/drivers/nfc/s3fwrn5/Kconfig
new file mode 100644
index 000000000..1eef91994
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/Kconfig
@@ -0,0 +1,20 @@
+config NFC_S3FWRN5
+	tristate
+	select CRYPTO
+	---help---
+	  Core driver for Samsung S3FWRN5 NFC chip. Contains core utilities
+	  of chip. It's intended to be used by PHYs to avoid duplicating lots
+	  of common code.
+
+config NFC_S3FWRN5_I2C
+	tristate "Samsung S3FWRN5 I2C support"
+	depends on NFC_NCI && I2C
+	select NFC_S3FWRN5
+	default n
+	---help---
+	  This module adds support for an I2C interface to the S3FWRN5 chip.
+	  Select this if your platform is using the I2C bus.
+
+	  To compile this driver as a module, choose m here. The module will
+	  be called s3fwrn5_i2c.ko.
+	  Say N if unsure.
diff --git a/drivers/nfc/s3fwrn5/Makefile b/drivers/nfc/s3fwrn5/Makefile
new file mode 100644
index 000000000..ddfa7be7d
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for Samsung S3FWRN5 NFC driver
+#
+
+s3fwrn5-objs = core.o firmware.o nci.o
+s3fwrn5_i2c-objs = i2c.o
+
+obj-$(CONFIG_NFC_S3FWRN5) += s3fwrn5.o
+obj-$(CONFIG_NFC_S3FWRN5_I2C) += s3fwrn5_i2c.o
diff --git a/drivers/nfc/s3fwrn5/core.c b/drivers/nfc/s3fwrn5/core.c
new file mode 100644
index 000000000..64b58455e
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/core.c
@@ -0,0 +1,220 @@
+/*
+ * NCI based driver for Samsung S3FWRN5 NFC chip
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <net/nfc/nci_core.h>
+
+#include "s3fwrn5.h"
+#include "firmware.h"
+#include "nci.h"
+
+#define S3FWRN5_NFC_PROTOCOLS  (NFC_PROTO_JEWEL_MASK | \
+				NFC_PROTO_MIFARE_MASK | \
+				NFC_PROTO_FELICA_MASK | \
+				NFC_PROTO_ISO14443_MASK | \
+				NFC_PROTO_ISO14443_B_MASK | \
+				NFC_PROTO_ISO15693_MASK)
+
+static int s3fwrn5_firmware_update(struct s3fwrn5_info *info)
+{
+	bool need_update;
+	int ret;
+
+	s3fwrn5_fw_init(&info->fw_info, "sec_s3fwrn5_firmware.bin");
+
+	/* Update firmware */
+
+	s3fwrn5_set_wake(info, false);
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_FW);
+
+	ret = s3fwrn5_fw_setup(&info->fw_info);
+	if (ret < 0)
+		return ret;
+
+	need_update = s3fwrn5_fw_check_version(&info->fw_info,
+		info->ndev->manufact_specific_info);
+	if (!need_update)
+		goto out;
+
+	dev_info(&info->ndev->nfc_dev->dev, "Detected new firmware version\n");
+
+	ret = s3fwrn5_fw_download(&info->fw_info);
+	if (ret < 0)
+		goto out;
+
+	/* Update RF configuration */
+
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI);
+
+	s3fwrn5_set_wake(info, true);
+	ret = s3fwrn5_nci_rf_configure(info, "sec_s3fwrn5_rfreg.bin");
+	s3fwrn5_set_wake(info, false);
+
+out:
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD);
+	s3fwrn5_fw_cleanup(&info->fw_info);
+	return ret;
+}
+
+static int s3fwrn5_nci_open(struct nci_dev *ndev)
+{
+	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
+
+	if (s3fwrn5_get_mode(info) != S3FWRN5_MODE_COLD)
+		return  -EBUSY;
+
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI);
+	s3fwrn5_set_wake(info, true);
+
+	return 0;
+}
+
+static int s3fwrn5_nci_close(struct nci_dev *ndev)
+{
+	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
+
+	s3fwrn5_set_wake(info, false);
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD);
+
+	return 0;
+}
+
+static int s3fwrn5_nci_send(struct nci_dev *ndev, struct sk_buff *skb)
+{
+	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
+	int ret;
+
+	mutex_lock(&info->mutex);
+
+	if (s3fwrn5_get_mode(info) != S3FWRN5_MODE_NCI) {
+		mutex_unlock(&info->mutex);
+		return -EINVAL;
+	}
+
+	ret = s3fwrn5_write(info, skb);
+	if (ret < 0)
+		kfree_skb(skb);
+
+	mutex_unlock(&info->mutex);
+	return ret;
+}
+
+static int s3fwrn5_nci_post_setup(struct nci_dev *ndev)
+{
+	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
+	int ret;
+
+	ret = s3fwrn5_firmware_update(info);
+	if (ret < 0)
+		goto out;
+
+	/* NCI core reset */
+
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI);
+	s3fwrn5_set_wake(info, true);
+
+	ret = nci_core_reset(info->ndev);
+	if (ret < 0)
+		goto out;
+
+	ret = nci_core_init(info->ndev);
+
+out:
+	return ret;
+}
+
+static struct nci_ops s3fwrn5_nci_ops = {
+	.open = s3fwrn5_nci_open,
+	.close = s3fwrn5_nci_close,
+	.send = s3fwrn5_nci_send,
+	.post_setup = s3fwrn5_nci_post_setup,
+};
+
+int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev,
+	const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload)
+{
+	struct s3fwrn5_info *info;
+	int ret;
+
+	info = devm_kzalloc(pdev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->phy_id = phy_id;
+	info->pdev = pdev;
+	info->phy_ops = phy_ops;
+	info->max_payload = max_payload;
+	mutex_init(&info->mutex);
+
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD);
+
+	s3fwrn5_nci_get_prop_ops(&s3fwrn5_nci_ops.prop_ops,
+		&s3fwrn5_nci_ops.n_prop_ops);
+
+	info->ndev = nci_allocate_device(&s3fwrn5_nci_ops,
+		S3FWRN5_NFC_PROTOCOLS, 0, 0);
+	if (!info->ndev)
+		return -ENOMEM;
+
+	nci_set_parent_dev(info->ndev, pdev);
+	nci_set_drvdata(info->ndev, info);
+
+	ret = nci_register_device(info->ndev);
+	if (ret < 0) {
+		nci_free_device(info->ndev);
+		return ret;
+	}
+
+	info->fw_info.ndev = info->ndev;
+
+	*ndev = info->ndev;
+
+	return ret;
+}
+EXPORT_SYMBOL(s3fwrn5_probe);
+
+void s3fwrn5_remove(struct nci_dev *ndev)
+{
+	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
+
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD);
+
+	nci_unregister_device(ndev);
+	nci_free_device(ndev);
+}
+EXPORT_SYMBOL(s3fwrn5_remove);
+
+int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb,
+	enum s3fwrn5_mode mode)
+{
+	switch (mode) {
+	case S3FWRN5_MODE_NCI:
+		return nci_recv_frame(ndev, skb);
+	case S3FWRN5_MODE_FW:
+		return s3fwrn5_fw_recv_frame(ndev, skb);
+	default:
+		kfree_skb(skb);
+		return -ENODEV;
+	}
+}
+EXPORT_SYMBOL(s3fwrn5_recv_frame);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Samsung S3FWRN5 NFC driver");
+MODULE_AUTHOR("Robert Baldyga <r.baldyga@samsung.com>");
diff --git a/drivers/nfc/s3fwrn5/firmware.c b/drivers/nfc/s3fwrn5/firmware.c
new file mode 100644
index 000000000..b7d5b1203
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/firmware.c
@@ -0,0 +1,531 @@
+/*
+ * NCI based driver for Samsung S3FWRN5 NFC chip
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/completion.h>
+#include <linux/firmware.h>
+#include <crypto/hash.h>
+#include <crypto/sha.h>
+
+#include "s3fwrn5.h"
+#include "firmware.h"
+
+struct s3fwrn5_fw_version {
+	__u8 major;
+	__u8 build1;
+	__u8 build2;
+	__u8 target;
+};
+
+static int s3fwrn5_fw_send_msg(struct s3fwrn5_fw_info *fw_info,
+	struct sk_buff *msg, struct sk_buff **rsp)
+{
+	struct s3fwrn5_info *info =
+		container_of(fw_info, struct s3fwrn5_info, fw_info);
+	long ret;
+
+	reinit_completion(&fw_info->completion);
+
+	ret = s3fwrn5_write(info, msg);
+	if (ret < 0)
+		return ret;
+
+	ret = wait_for_completion_interruptible_timeout(
+		&fw_info->completion, msecs_to_jiffies(1000));
+	if (ret < 0)
+		return ret;
+	else if (ret == 0)
+		return -ENXIO;
+
+	if (!fw_info->rsp)
+		return -EINVAL;
+
+	*rsp = fw_info->rsp;
+	fw_info->rsp = NULL;
+
+	return 0;
+}
+
+static int s3fwrn5_fw_prep_msg(struct s3fwrn5_fw_info *fw_info,
+	struct sk_buff **msg, u8 type, u8 code, const void *data, u16 len)
+{
+	struct s3fwrn5_fw_header hdr;
+	struct sk_buff *skb;
+
+	hdr.type = type | fw_info->parity;
+	fw_info->parity ^= 0x80;
+	hdr.code = code;
+	hdr.len = len;
+
+	skb = alloc_skb(S3FWRN5_FW_HDR_SIZE + len, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_data(skb, &hdr, S3FWRN5_FW_HDR_SIZE);
+	if (len)
+		skb_put_data(skb, data, len);
+
+	*msg = skb;
+
+	return 0;
+}
+
+static int s3fwrn5_fw_get_bootinfo(struct s3fwrn5_fw_info *fw_info,
+	struct s3fwrn5_fw_cmd_get_bootinfo_rsp *bootinfo)
+{
+	struct sk_buff *msg, *rsp = NULL;
+	struct s3fwrn5_fw_header *hdr;
+	int ret;
+
+	/* Send GET_BOOTINFO command */
+
+	ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD,
+		S3FWRN5_FW_CMD_GET_BOOTINFO, NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp);
+	kfree_skb(msg);
+	if (ret < 0)
+		return ret;
+
+	hdr = (struct s3fwrn5_fw_header *) rsp->data;
+	if (hdr->code != S3FWRN5_FW_RET_SUCCESS) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	memcpy(bootinfo, rsp->data + S3FWRN5_FW_HDR_SIZE, 10);
+
+out:
+	kfree_skb(rsp);
+	return ret;
+}
+
+static int s3fwrn5_fw_enter_update_mode(struct s3fwrn5_fw_info *fw_info,
+	const void *hash_data, u16 hash_size,
+	const void *sig_data, u16 sig_size)
+{
+	struct s3fwrn5_fw_cmd_enter_updatemode args;
+	struct sk_buff *msg, *rsp = NULL;
+	struct s3fwrn5_fw_header *hdr;
+	int ret;
+
+	/* Send ENTER_UPDATE_MODE command */
+
+	args.hashcode_size = hash_size;
+	args.signature_size = sig_size;
+
+	ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD,
+		S3FWRN5_FW_CMD_ENTER_UPDATE_MODE, &args, sizeof(args));
+	if (ret < 0)
+		return ret;
+
+	ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp);
+	kfree_skb(msg);
+	if (ret < 0)
+		return ret;
+
+	hdr = (struct s3fwrn5_fw_header *) rsp->data;
+	if (hdr->code != S3FWRN5_FW_RET_SUCCESS) {
+		ret = -EPROTO;
+		goto out;
+	}
+
+	kfree_skb(rsp);
+
+	/* Send hashcode data */
+
+	ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_DATA, 0,
+		hash_data, hash_size);
+	if (ret < 0)
+		return ret;
+
+	ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp);
+	kfree_skb(msg);
+	if (ret < 0)
+		return ret;
+
+	hdr = (struct s3fwrn5_fw_header *) rsp->data;
+	if (hdr->code != S3FWRN5_FW_RET_SUCCESS) {
+		ret = -EPROTO;
+		goto out;
+	}
+
+	kfree_skb(rsp);
+
+	/* Send signature data */
+
+	ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_DATA, 0,
+		sig_data, sig_size);
+	if (ret < 0)
+		return ret;
+
+	ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp);
+	kfree_skb(msg);
+	if (ret < 0)
+		return ret;
+
+	hdr = (struct s3fwrn5_fw_header *) rsp->data;
+	if (hdr->code != S3FWRN5_FW_RET_SUCCESS)
+		ret = -EPROTO;
+
+out:
+	kfree_skb(rsp);
+	return ret;
+}
+
+static int s3fwrn5_fw_update_sector(struct s3fwrn5_fw_info *fw_info,
+	u32 base_addr, const void *data)
+{
+	struct s3fwrn5_fw_cmd_update_sector args;
+	struct sk_buff *msg, *rsp = NULL;
+	struct s3fwrn5_fw_header *hdr;
+	int ret, i;
+
+	/* Send UPDATE_SECTOR command */
+
+	args.base_address = base_addr;
+
+	ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD,
+		S3FWRN5_FW_CMD_UPDATE_SECTOR, &args, sizeof(args));
+	if (ret < 0)
+		return ret;
+
+	ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp);
+	kfree_skb(msg);
+	if (ret < 0)
+		return ret;
+
+	hdr = (struct s3fwrn5_fw_header *) rsp->data;
+	if (hdr->code != S3FWRN5_FW_RET_SUCCESS) {
+		ret = -EPROTO;
+		goto err;
+	}
+
+	kfree_skb(rsp);
+
+	/* Send data split into 256-byte packets */
+
+	for (i = 0; i < 16; ++i) {
+		ret = s3fwrn5_fw_prep_msg(fw_info, &msg,
+			S3FWRN5_FW_MSG_DATA, 0, data+256*i, 256);
+		if (ret < 0)
+			break;
+
+		ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp);
+		kfree_skb(msg);
+		if (ret < 0)
+			break;
+
+		hdr = (struct s3fwrn5_fw_header *) rsp->data;
+		if (hdr->code != S3FWRN5_FW_RET_SUCCESS) {
+			ret = -EPROTO;
+			goto err;
+		}
+
+		kfree_skb(rsp);
+	}
+
+	return ret;
+
+err:
+	kfree_skb(rsp);
+	return ret;
+}
+
+static int s3fwrn5_fw_complete_update_mode(struct s3fwrn5_fw_info *fw_info)
+{
+	struct sk_buff *msg, *rsp = NULL;
+	struct s3fwrn5_fw_header *hdr;
+	int ret;
+
+	/* Send COMPLETE_UPDATE_MODE command */
+
+	ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD,
+		S3FWRN5_FW_CMD_COMPLETE_UPDATE_MODE, NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp);
+	kfree_skb(msg);
+	if (ret < 0)
+		return ret;
+
+	hdr = (struct s3fwrn5_fw_header *) rsp->data;
+	if (hdr->code != S3FWRN5_FW_RET_SUCCESS)
+		ret = -EPROTO;
+
+	kfree_skb(rsp);
+
+	return ret;
+}
+
+/*
+ * Firmware header stucture:
+ *
+ * 0x00 - 0x0B : Date and time string (w/o NUL termination)
+ * 0x10 - 0x13 : Firmware version
+ * 0x14 - 0x17 : Signature address
+ * 0x18 - 0x1B : Signature size
+ * 0x1C - 0x1F : Firmware image address
+ * 0x20 - 0x23 : Firmware sectors count
+ * 0x24 - 0x27 : Custom signature address
+ * 0x28 - 0x2B : Custom signature size
+ */
+
+#define S3FWRN5_FW_IMAGE_HEADER_SIZE 44
+
+static int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info)
+{
+	struct s3fwrn5_fw_image *fw = &fw_info->fw;
+	u32 sig_off;
+	u32 image_off;
+	u32 custom_sig_off;
+	int ret;
+
+	ret = request_firmware(&fw->fw, fw_info->fw_name,
+		&fw_info->ndev->nfc_dev->dev);
+	if (ret < 0)
+		return ret;
+
+	if (fw->fw->size < S3FWRN5_FW_IMAGE_HEADER_SIZE) {
+		release_firmware(fw->fw);
+		return -EINVAL;
+	}
+
+	memcpy(fw->date, fw->fw->data + 0x00, 12);
+	fw->date[12] = '\0';
+
+	memcpy(&fw->version, fw->fw->data + 0x10, 4);
+
+	memcpy(&sig_off, fw->fw->data + 0x14, 4);
+	fw->sig = fw->fw->data + sig_off;
+	memcpy(&fw->sig_size, fw->fw->data + 0x18, 4);
+
+	memcpy(&image_off, fw->fw->data + 0x1C, 4);
+	fw->image = fw->fw->data + image_off;
+	memcpy(&fw->image_sectors, fw->fw->data + 0x20, 4);
+
+	memcpy(&custom_sig_off, fw->fw->data + 0x24, 4);
+	fw->custom_sig = fw->fw->data + custom_sig_off;
+	memcpy(&fw->custom_sig_size, fw->fw->data + 0x28, 4);
+
+	return 0;
+}
+
+static void s3fwrn5_fw_release_firmware(struct s3fwrn5_fw_info *fw_info)
+{
+	release_firmware(fw_info->fw.fw);
+}
+
+static int s3fwrn5_fw_get_base_addr(
+	struct s3fwrn5_fw_cmd_get_bootinfo_rsp *bootinfo, u32 *base_addr)
+{
+	int i;
+	static const struct {
+		u8 version[4];
+		u32 base_addr;
+	} match[] = {
+		{{0x05, 0x00, 0x00, 0x00}, 0x00005000},
+		{{0x05, 0x00, 0x00, 0x01}, 0x00003000},
+		{{0x05, 0x00, 0x00, 0x02}, 0x00003000},
+		{{0x05, 0x00, 0x00, 0x03}, 0x00003000},
+		{{0x05, 0x00, 0x00, 0x05}, 0x00003000}
+	};
+
+	for (i = 0; i < ARRAY_SIZE(match); ++i)
+		if (bootinfo->hw_version[0] == match[i].version[0] &&
+			bootinfo->hw_version[1] == match[i].version[1] &&
+			bootinfo->hw_version[3] == match[i].version[3]) {
+			*base_addr = match[i].base_addr;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+static inline bool
+s3fwrn5_fw_is_custom(struct s3fwrn5_fw_cmd_get_bootinfo_rsp *bootinfo)
+{
+	return !!bootinfo->hw_version[2];
+}
+
+int s3fwrn5_fw_setup(struct s3fwrn5_fw_info *fw_info)
+{
+	struct s3fwrn5_fw_cmd_get_bootinfo_rsp bootinfo;
+	int ret;
+
+	/* Get firmware data */
+
+	ret = s3fwrn5_fw_request_firmware(fw_info);
+	if (ret < 0) {
+		dev_err(&fw_info->ndev->nfc_dev->dev,
+			"Failed to get fw file, ret=%02x\n", ret);
+		return ret;
+	}
+
+	/* Get bootloader info */
+
+	ret = s3fwrn5_fw_get_bootinfo(fw_info, &bootinfo);
+	if (ret < 0) {
+		dev_err(&fw_info->ndev->nfc_dev->dev,
+			"Failed to get bootinfo, ret=%02x\n", ret);
+		goto err;
+	}
+
+	/* Match hardware version to obtain firmware base address */
+
+	ret = s3fwrn5_fw_get_base_addr(&bootinfo, &fw_info->base_addr);
+	if (ret < 0) {
+		dev_err(&fw_info->ndev->nfc_dev->dev,
+			"Unknown hardware version\n");
+		goto err;
+	}
+
+	fw_info->sector_size = bootinfo.sector_size;
+
+	fw_info->sig_size = s3fwrn5_fw_is_custom(&bootinfo) ?
+		fw_info->fw.custom_sig_size : fw_info->fw.sig_size;
+	fw_info->sig = s3fwrn5_fw_is_custom(&bootinfo) ?
+		fw_info->fw.custom_sig : fw_info->fw.sig;
+
+	return 0;
+
+err:
+	s3fwrn5_fw_release_firmware(fw_info);
+	return ret;
+}
+
+bool s3fwrn5_fw_check_version(struct s3fwrn5_fw_info *fw_info, u32 version)
+{
+	struct s3fwrn5_fw_version *new = (void *) &fw_info->fw.version;
+	struct s3fwrn5_fw_version *old = (void *) &version;
+
+	if (new->major > old->major)
+		return true;
+	if (new->build1 > old->build1)
+		return true;
+	if (new->build2 > old->build2)
+		return true;
+
+	return false;
+}
+
+int s3fwrn5_fw_download(struct s3fwrn5_fw_info *fw_info)
+{
+	struct s3fwrn5_fw_image *fw = &fw_info->fw;
+	u8 hash_data[SHA1_DIGEST_SIZE];
+	struct crypto_shash *tfm;
+	u32 image_size, off;
+	int ret;
+
+	image_size = fw_info->sector_size * fw->image_sectors;
+
+	/* Compute SHA of firmware data */
+
+	tfm = crypto_alloc_shash("sha1", 0, 0);
+	if (IS_ERR(tfm)) {
+		ret = PTR_ERR(tfm);
+		dev_err(&fw_info->ndev->nfc_dev->dev,
+			"Cannot allocate shash (code=%d)\n", ret);
+		goto out;
+	}
+
+	{
+		SHASH_DESC_ON_STACK(desc, tfm);
+
+		desc->tfm = tfm;
+		desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
+
+		ret = crypto_shash_digest(desc, fw->image, image_size,
+					  hash_data);
+		shash_desc_zero(desc);
+	}
+
+	crypto_free_shash(tfm);
+	if (ret) {
+		dev_err(&fw_info->ndev->nfc_dev->dev,
+			"Cannot compute hash (code=%d)\n", ret);
+		goto out;
+	}
+
+	/* Firmware update process */
+
+	dev_info(&fw_info->ndev->nfc_dev->dev,
+		"Firmware update: %s\n", fw_info->fw_name);
+
+	ret = s3fwrn5_fw_enter_update_mode(fw_info, hash_data,
+		SHA1_DIGEST_SIZE, fw_info->sig, fw_info->sig_size);
+	if (ret < 0) {
+		dev_err(&fw_info->ndev->nfc_dev->dev,
+			"Unable to enter update mode\n");
+		goto out;
+	}
+
+	for (off = 0; off < image_size; off += fw_info->sector_size) {
+		ret = s3fwrn5_fw_update_sector(fw_info,
+			fw_info->base_addr + off, fw->image + off);
+		if (ret < 0) {
+			dev_err(&fw_info->ndev->nfc_dev->dev,
+				"Firmware update error (code=%d)\n", ret);
+			goto out;
+		}
+	}
+
+	ret = s3fwrn5_fw_complete_update_mode(fw_info);
+	if (ret < 0) {
+		dev_err(&fw_info->ndev->nfc_dev->dev,
+			"Unable to complete update mode\n");
+		goto out;
+	}
+
+	dev_info(&fw_info->ndev->nfc_dev->dev,
+		"Firmware update: success\n");
+
+out:
+	return ret;
+}
+
+void s3fwrn5_fw_init(struct s3fwrn5_fw_info *fw_info, const char *fw_name)
+{
+	fw_info->parity = 0x00;
+	fw_info->rsp = NULL;
+	fw_info->fw.fw = NULL;
+	strcpy(fw_info->fw_name, fw_name);
+	init_completion(&fw_info->completion);
+}
+
+void s3fwrn5_fw_cleanup(struct s3fwrn5_fw_info *fw_info)
+{
+	s3fwrn5_fw_release_firmware(fw_info);
+}
+
+int s3fwrn5_fw_recv_frame(struct nci_dev *ndev, struct sk_buff *skb)
+{
+	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
+	struct s3fwrn5_fw_info *fw_info = &info->fw_info;
+
+	BUG_ON(fw_info->rsp);
+
+	fw_info->rsp = skb;
+
+	complete(&fw_info->completion);
+
+	return 0;
+}
diff --git a/drivers/nfc/s3fwrn5/firmware.h b/drivers/nfc/s3fwrn5/firmware.h
new file mode 100644
index 000000000..1ec0647ab
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/firmware.h
@@ -0,0 +1,111 @@
+/*
+ * NCI based driver for Samsung S3FWRN5 NFC chip
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_S3FWRN5_FIRMWARE_H_
+#define __LOCAL_S3FWRN5_FIRMWARE_H_
+
+/* FW Message Types */
+#define S3FWRN5_FW_MSG_CMD			0x00
+#define S3FWRN5_FW_MSG_RSP			0x01
+#define S3FWRN5_FW_MSG_DATA			0x02
+
+/* FW Return Codes */
+#define S3FWRN5_FW_RET_SUCCESS			0x00
+#define S3FWRN5_FW_RET_MESSAGE_TYPE_INVALID	0x01
+#define S3FWRN5_FW_RET_COMMAND_INVALID		0x02
+#define S3FWRN5_FW_RET_PAGE_DATA_OVERFLOW	0x03
+#define S3FWRN5_FW_RET_SECT_DATA_OVERFLOW	0x04
+#define S3FWRN5_FW_RET_AUTHENTICATION_FAIL	0x05
+#define S3FWRN5_FW_RET_FLASH_OPERATION_FAIL	0x06
+#define S3FWRN5_FW_RET_ADDRESS_OUT_OF_RANGE	0x07
+#define S3FWRN5_FW_RET_PARAMETER_INVALID	0x08
+
+/* ---- FW Packet structures ---- */
+#define S3FWRN5_FW_HDR_SIZE 4
+
+struct s3fwrn5_fw_header {
+	__u8 type;
+	__u8 code;
+	__u16 len;
+};
+
+#define S3FWRN5_FW_CMD_RESET			0x00
+
+#define S3FWRN5_FW_CMD_GET_BOOTINFO		0x01
+
+struct s3fwrn5_fw_cmd_get_bootinfo_rsp {
+	__u8 hw_version[4];
+	__u16 sector_size;
+	__u16 page_size;
+	__u16 frame_max_size;
+	__u16 hw_buffer_size;
+};
+
+#define S3FWRN5_FW_CMD_ENTER_UPDATE_MODE	0x02
+
+struct s3fwrn5_fw_cmd_enter_updatemode {
+	__u16 hashcode_size;
+	__u16 signature_size;
+};
+
+#define S3FWRN5_FW_CMD_UPDATE_SECTOR		0x04
+
+struct s3fwrn5_fw_cmd_update_sector {
+	__u32 base_address;
+};
+
+#define S3FWRN5_FW_CMD_COMPLETE_UPDATE_MODE	0x05
+
+struct s3fwrn5_fw_image {
+	const struct firmware *fw;
+
+	char date[13];
+	u32 version;
+	const void *sig;
+	u32 sig_size;
+	const void *image;
+	u32 image_sectors;
+	const void *custom_sig;
+	u32 custom_sig_size;
+};
+
+struct s3fwrn5_fw_info {
+	struct nci_dev *ndev;
+	struct s3fwrn5_fw_image fw;
+	char fw_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
+
+	const void *sig;
+	u32 sig_size;
+	u32 sector_size;
+	u32 base_addr;
+
+	struct completion completion;
+	struct sk_buff *rsp;
+	char parity;
+};
+
+void s3fwrn5_fw_init(struct s3fwrn5_fw_info *fw_info, const char *fw_name);
+int s3fwrn5_fw_setup(struct s3fwrn5_fw_info *fw_info);
+bool s3fwrn5_fw_check_version(struct s3fwrn5_fw_info *fw_info, u32 version);
+int s3fwrn5_fw_download(struct s3fwrn5_fw_info *fw_info);
+void s3fwrn5_fw_cleanup(struct s3fwrn5_fw_info *fw_info);
+
+int s3fwrn5_fw_recv_frame(struct nci_dev *ndev, struct sk_buff *skb);
+
+#endif /* __LOCAL_S3FWRN5_FIRMWARE_H_ */
diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c
new file mode 100644
index 000000000..6c78529a8
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/i2c.c
@@ -0,0 +1,306 @@
+/*
+ * I2C Link Layer for Samsung S3FWRN5 NCI based Driver
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/module.h>
+
+#include <net/nfc/nfc.h>
+
+#include "s3fwrn5.h"
+
+#define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c"
+
+#define S3FWRN5_I2C_MAX_PAYLOAD 32
+#define S3FWRN5_EN_WAIT_TIME 150
+
+struct s3fwrn5_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct nci_dev *ndev;
+
+	int gpio_en;
+	int gpio_fw_wake;
+
+	struct mutex mutex;
+
+	enum s3fwrn5_mode mode;
+	unsigned int irq_skip:1;
+};
+
+static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake)
+{
+	struct s3fwrn5_i2c_phy *phy = phy_id;
+
+	mutex_lock(&phy->mutex);
+	gpio_set_value(phy->gpio_fw_wake, wake);
+	msleep(S3FWRN5_EN_WAIT_TIME/2);
+	mutex_unlock(&phy->mutex);
+}
+
+static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode)
+{
+	struct s3fwrn5_i2c_phy *phy = phy_id;
+
+	mutex_lock(&phy->mutex);
+
+	if (phy->mode == mode)
+		goto out;
+
+	phy->mode = mode;
+
+	gpio_set_value(phy->gpio_en, 1);
+	gpio_set_value(phy->gpio_fw_wake, 0);
+	if (mode == S3FWRN5_MODE_FW)
+		gpio_set_value(phy->gpio_fw_wake, 1);
+
+	if (mode != S3FWRN5_MODE_COLD) {
+		msleep(S3FWRN5_EN_WAIT_TIME);
+		gpio_set_value(phy->gpio_en, 0);
+		msleep(S3FWRN5_EN_WAIT_TIME/2);
+	}
+
+	phy->irq_skip = true;
+
+out:
+	mutex_unlock(&phy->mutex);
+}
+
+static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id)
+{
+	struct s3fwrn5_i2c_phy *phy = phy_id;
+	enum s3fwrn5_mode mode;
+
+	mutex_lock(&phy->mutex);
+
+	mode = phy->mode;
+
+	mutex_unlock(&phy->mutex);
+
+	return mode;
+}
+
+static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+	struct s3fwrn5_i2c_phy *phy = phy_id;
+	int ret;
+
+	mutex_lock(&phy->mutex);
+
+	phy->irq_skip = false;
+
+	ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len);
+	if (ret == -EREMOTEIO) {
+		/* Retry, chip was in standby */
+		usleep_range(110000, 120000);
+		ret  = i2c_master_send(phy->i2c_dev, skb->data, skb->len);
+	}
+
+	mutex_unlock(&phy->mutex);
+
+	if (ret < 0)
+		return ret;
+
+	if (ret != skb->len)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static const struct s3fwrn5_phy_ops i2c_phy_ops = {
+	.set_wake = s3fwrn5_i2c_set_wake,
+	.set_mode = s3fwrn5_i2c_set_mode,
+	.get_mode = s3fwrn5_i2c_get_mode,
+	.write = s3fwrn5_i2c_write,
+};
+
+static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
+{
+	struct sk_buff *skb;
+	size_t hdr_size;
+	size_t data_len;
+	char hdr[4];
+	int ret;
+
+	hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ?
+		NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE;
+	ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size);
+	if (ret < 0)
+		return ret;
+
+	if (ret < hdr_size)
+		return -EBADMSG;
+
+	data_len = (phy->mode == S3FWRN5_MODE_NCI) ?
+		((struct nci_ctrl_hdr *)hdr)->plen :
+		((struct s3fwrn5_fw_header *)hdr)->len;
+
+	skb = alloc_skb(hdr_size + data_len, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_data(skb, hdr, hdr_size);
+
+	if (data_len == 0)
+		goto out;
+
+	ret = i2c_master_recv(phy->i2c_dev, skb_put(skb, data_len), data_len);
+	if (ret != data_len) {
+		kfree_skb(skb);
+		return -EBADMSG;
+	}
+
+out:
+	return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode);
+}
+
+static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id)
+{
+	struct s3fwrn5_i2c_phy *phy = phy_id;
+	int ret = 0;
+
+	if (!phy || !phy->ndev) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	mutex_lock(&phy->mutex);
+
+	if (phy->irq_skip)
+		goto out;
+
+	switch (phy->mode) {
+	case S3FWRN5_MODE_NCI:
+	case S3FWRN5_MODE_FW:
+		ret = s3fwrn5_i2c_read(phy);
+		break;
+	case S3FWRN5_MODE_COLD:
+		ret = -EREMOTEIO;
+		break;
+	}
+
+out:
+	mutex_unlock(&phy->mutex);
+
+	return IRQ_HANDLED;
+}
+
+static int s3fwrn5_i2c_parse_dt(struct i2c_client *client)
+{
+	struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client);
+	struct device_node *np = client->dev.of_node;
+
+	if (!np)
+		return -ENODEV;
+
+	phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0);
+	if (!gpio_is_valid(phy->gpio_en))
+		return -ENODEV;
+
+	phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0);
+	if (!gpio_is_valid(phy->gpio_fw_wake))
+		return -ENODEV;
+
+	return 0;
+}
+
+static int s3fwrn5_i2c_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct s3fwrn5_i2c_phy *phy;
+	int ret;
+
+	phy = devm_kzalloc(&client->dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	mutex_init(&phy->mutex);
+	phy->mode = S3FWRN5_MODE_COLD;
+	phy->irq_skip = true;
+
+	phy->i2c_dev = client;
+	i2c_set_clientdata(client, phy);
+
+	ret = s3fwrn5_i2c_parse_dt(client);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en,
+		GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
+	if (ret < 0)
+		return ret;
+
+	ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake,
+		GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
+	if (ret < 0)
+		return ret;
+
+	ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops,
+		S3FWRN5_I2C_MAX_PAYLOAD);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL,
+		s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+		S3FWRN5_I2C_DRIVER_NAME, phy);
+	if (ret)
+		s3fwrn5_remove(phy->ndev);
+
+	return ret;
+}
+
+static int s3fwrn5_i2c_remove(struct i2c_client *client)
+{
+	struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client);
+
+	s3fwrn5_remove(phy->ndev);
+
+	return 0;
+}
+
+static const struct i2c_device_id s3fwrn5_i2c_id_table[] = {
+	{S3FWRN5_I2C_DRIVER_NAME, 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, s3fwrn5_i2c_id_table);
+
+static const struct of_device_id of_s3fwrn5_i2c_match[] = {
+	{ .compatible = "samsung,s3fwrn5-i2c", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_s3fwrn5_i2c_match);
+
+static struct i2c_driver s3fwrn5_i2c_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = S3FWRN5_I2C_DRIVER_NAME,
+		.of_match_table = of_match_ptr(of_s3fwrn5_i2c_match),
+	},
+	.probe = s3fwrn5_i2c_probe,
+	.remove = s3fwrn5_i2c_remove,
+	.id_table = s3fwrn5_i2c_id_table,
+};
+
+module_i2c_driver(s3fwrn5_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("I2C driver for Samsung S3FWRN5");
+MODULE_AUTHOR("Robert Baldyga <r.baldyga@samsung.com>");
diff --git a/drivers/nfc/s3fwrn5/nci.c b/drivers/nfc/s3fwrn5/nci.c
new file mode 100644
index 000000000..075e4e877
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/nci.c
@@ -0,0 +1,165 @@
+/*
+ * NCI based driver for Samsung S3FWRN5 NFC chip
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/completion.h>
+#include <linux/firmware.h>
+
+#include "s3fwrn5.h"
+#include "nci.h"
+
+static int s3fwrn5_nci_prop_rsp(struct nci_dev *ndev, struct sk_buff *skb)
+{
+	__u8 status = skb->data[0];
+
+	nci_req_complete(ndev, status);
+	return 0;
+}
+
+static struct nci_driver_ops s3fwrn5_nci_prop_ops[] = {
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROPRIETARY,
+				NCI_PROP_AGAIN),
+		.rsp = s3fwrn5_nci_prop_rsp,
+	},
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROPRIETARY,
+				NCI_PROP_GET_RFREG),
+		.rsp = s3fwrn5_nci_prop_rsp,
+	},
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROPRIETARY,
+				NCI_PROP_SET_RFREG),
+		.rsp = s3fwrn5_nci_prop_rsp,
+	},
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROPRIETARY,
+				NCI_PROP_GET_RFREG_VER),
+		.rsp = s3fwrn5_nci_prop_rsp,
+	},
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROPRIETARY,
+				NCI_PROP_SET_RFREG_VER),
+		.rsp = s3fwrn5_nci_prop_rsp,
+	},
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROPRIETARY,
+				NCI_PROP_START_RFREG),
+		.rsp = s3fwrn5_nci_prop_rsp,
+	},
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROPRIETARY,
+				NCI_PROP_STOP_RFREG),
+		.rsp = s3fwrn5_nci_prop_rsp,
+	},
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROPRIETARY,
+				NCI_PROP_FW_CFG),
+		.rsp = s3fwrn5_nci_prop_rsp,
+	},
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROPRIETARY,
+				NCI_PROP_WR_RESET),
+		.rsp = s3fwrn5_nci_prop_rsp,
+	},
+};
+
+void s3fwrn5_nci_get_prop_ops(struct nci_driver_ops **ops, size_t *n)
+{
+	*ops = s3fwrn5_nci_prop_ops;
+	*n = ARRAY_SIZE(s3fwrn5_nci_prop_ops);
+}
+
+#define S3FWRN5_RFREG_SECTION_SIZE 252
+
+int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name)
+{
+	const struct firmware *fw;
+	struct nci_prop_fw_cfg_cmd fw_cfg;
+	struct nci_prop_set_rfreg_cmd set_rfreg;
+	struct nci_prop_stop_rfreg_cmd stop_rfreg;
+	u32 checksum;
+	int i, len;
+	int ret;
+
+	ret = request_firmware(&fw, fw_name, &info->ndev->nfc_dev->dev);
+	if (ret < 0)
+		return ret;
+
+	/* Compute rfreg checksum */
+
+	checksum = 0;
+	for (i = 0; i < fw->size; i += 4)
+		checksum += *((u32 *)(fw->data+i));
+
+	/* Set default clock configuration for external crystal */
+
+	fw_cfg.clk_type = 0x01;
+	fw_cfg.clk_speed = 0xff;
+	fw_cfg.clk_req = 0xff;
+	ret = nci_prop_cmd(info->ndev, NCI_PROP_FW_CFG,
+		sizeof(fw_cfg), (__u8 *)&fw_cfg);
+	if (ret < 0)
+		goto out;
+
+	/* Start rfreg configuration */
+
+	dev_info(&info->ndev->nfc_dev->dev,
+		"rfreg configuration update: %s\n", fw_name);
+
+	ret = nci_prop_cmd(info->ndev, NCI_PROP_START_RFREG, 0, NULL);
+	if (ret < 0) {
+		dev_err(&info->ndev->nfc_dev->dev,
+			"Unable to start rfreg update\n");
+		goto out;
+	}
+
+	/* Update rfreg */
+
+	set_rfreg.index = 0;
+	for (i = 0; i < fw->size; i += S3FWRN5_RFREG_SECTION_SIZE) {
+		len = (fw->size - i < S3FWRN5_RFREG_SECTION_SIZE) ?
+			(fw->size - i) : S3FWRN5_RFREG_SECTION_SIZE;
+		memcpy(set_rfreg.data, fw->data+i, len);
+		ret = nci_prop_cmd(info->ndev, NCI_PROP_SET_RFREG,
+			len+1, (__u8 *)&set_rfreg);
+		if (ret < 0) {
+			dev_err(&info->ndev->nfc_dev->dev,
+				"rfreg update error (code=%d)\n", ret);
+			goto out;
+		}
+		set_rfreg.index++;
+	}
+
+	/* Finish rfreg configuration */
+
+	stop_rfreg.checksum = checksum & 0xffff;
+	ret = nci_prop_cmd(info->ndev, NCI_PROP_STOP_RFREG,
+		sizeof(stop_rfreg), (__u8 *)&stop_rfreg);
+	if (ret < 0) {
+		dev_err(&info->ndev->nfc_dev->dev,
+			"Unable to stop rfreg update\n");
+		goto out;
+	}
+
+	dev_info(&info->ndev->nfc_dev->dev,
+		"rfreg configuration update: success\n");
+out:
+	release_firmware(fw);
+	return ret;
+}
diff --git a/drivers/nfc/s3fwrn5/nci.h b/drivers/nfc/s3fwrn5/nci.h
new file mode 100644
index 000000000..60c7fb575
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/nci.h
@@ -0,0 +1,89 @@
+/*
+ * NCI based driver for Samsung S3FWRN5 NFC chip
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_S3FWRN5_NCI_H_
+#define __LOCAL_S3FWRN5_NCI_H_
+
+#include "s3fwrn5.h"
+
+#define NCI_PROP_AGAIN		0x01
+
+#define NCI_PROP_GET_RFREG	0x21
+#define NCI_PROP_SET_RFREG	0x22
+
+struct nci_prop_set_rfreg_cmd {
+	__u8 index;
+	__u8 data[252];
+};
+
+struct nci_prop_set_rfreg_rsp {
+	__u8 status;
+};
+
+#define NCI_PROP_GET_RFREG_VER	0x24
+
+struct nci_prop_get_rfreg_ver_rsp {
+	__u8 status;
+	__u8 data[8];
+};
+
+#define NCI_PROP_SET_RFREG_VER	0x25
+
+struct nci_prop_set_rfreg_ver_cmd {
+	__u8 data[8];
+};
+
+struct nci_prop_set_rfreg_ver_rsp {
+	__u8 status;
+};
+
+#define NCI_PROP_START_RFREG	0x26
+
+struct nci_prop_start_rfreg_rsp {
+	__u8 status;
+};
+
+#define NCI_PROP_STOP_RFREG	0x27
+
+struct nci_prop_stop_rfreg_cmd {
+	__u16 checksum;
+};
+
+struct nci_prop_stop_rfreg_rsp {
+	__u8 status;
+};
+
+#define NCI_PROP_FW_CFG		0x28
+
+struct nci_prop_fw_cfg_cmd {
+	__u8 clk_type;
+	__u8 clk_speed;
+	__u8 clk_req;
+};
+
+struct nci_prop_fw_cfg_rsp {
+	__u8 status;
+};
+
+#define NCI_PROP_WR_RESET	0x2f
+
+void s3fwrn5_nci_get_prop_ops(struct nci_driver_ops **ops, size_t *n);
+int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name);
+
+#endif /* __LOCAL_S3FWRN5_NCI_H_ */
diff --git a/drivers/nfc/s3fwrn5/s3fwrn5.h b/drivers/nfc/s3fwrn5/s3fwrn5.h
new file mode 100644
index 000000000..7d5e51603
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/s3fwrn5.h
@@ -0,0 +1,99 @@
+/*
+ * NCI based driver for Samsung S3FWRN5 NFC chip
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_S3FWRN5_H_
+#define __LOCAL_S3FWRN5_H_
+
+#include <linux/nfc.h>
+
+#include <net/nfc/nci_core.h>
+
+#include "firmware.h"
+
+enum s3fwrn5_mode {
+	S3FWRN5_MODE_COLD,
+	S3FWRN5_MODE_NCI,
+	S3FWRN5_MODE_FW,
+};
+
+struct s3fwrn5_phy_ops {
+	void (*set_wake)(void *id, bool sleep);
+	void (*set_mode)(void *id, enum s3fwrn5_mode);
+	enum s3fwrn5_mode (*get_mode)(void *id);
+	int (*write)(void *id, struct sk_buff *skb);
+};
+
+struct s3fwrn5_info {
+	struct nci_dev *ndev;
+	void *phy_id;
+	struct device *pdev;
+
+	const struct s3fwrn5_phy_ops *phy_ops;
+	unsigned int max_payload;
+
+	struct s3fwrn5_fw_info fw_info;
+
+	struct mutex mutex;
+};
+
+static inline int s3fwrn5_set_mode(struct s3fwrn5_info *info,
+	enum s3fwrn5_mode mode)
+{
+	if (!info->phy_ops->set_mode)
+		return -ENOTSUPP;
+
+	info->phy_ops->set_mode(info->phy_id, mode);
+
+	return 0;
+}
+
+static inline enum s3fwrn5_mode s3fwrn5_get_mode(struct s3fwrn5_info *info)
+{
+	if (!info->phy_ops->get_mode)
+		return -ENOTSUPP;
+
+	return info->phy_ops->get_mode(info->phy_id);
+}
+
+static inline int s3fwrn5_set_wake(struct s3fwrn5_info *info, bool wake)
+{
+	if (!info->phy_ops->set_wake)
+		return -ENOTSUPP;
+
+	info->phy_ops->set_wake(info->phy_id, wake);
+
+	return 0;
+}
+
+static inline int s3fwrn5_write(struct s3fwrn5_info *info, struct sk_buff *skb)
+{
+	if (!info->phy_ops->write)
+		return -ENOTSUPP;
+
+	return info->phy_ops->write(info->phy_id, skb);
+}
+
+int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev,
+	const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload);
+void s3fwrn5_remove(struct nci_dev *ndev);
+
+int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb,
+	enum s3fwrn5_mode mode);
+
+#endif /* __LOCAL_S3FWRN5_H_ */
diff --git a/drivers/nfc/st-nci/Kconfig b/drivers/nfc/st-nci/Kconfig
new file mode 100644
index 000000000..5c6e21ccb
--- /dev/null
+++ b/drivers/nfc/st-nci/Kconfig
@@ -0,0 +1,30 @@
+config NFC_ST_NCI
+	tristate
+	---help---
+	  STMicroelectronics NFC NCI chips core driver. It implements the chipset
+	  NCI logic and hooks into the NFC kernel APIs. Physical layers will
+	  register against it.
+
+config NFC_ST_NCI_I2C
+	tristate "STMicroelectronics ST NCI NFC driver (I2C)"
+	depends on NFC_NCI && I2C
+	select NFC_ST_NCI
+	---help---
+	  This module adds support for an I2C interface to the
+	  STMicroelectronics NFC NCI chips family.
+	  Select this if your platform is using the i2c bus.
+
+	  If you choose to build a module, it'll be called st-nci_i2c.
+	  Say N if unsure.
+
+config NFC_ST_NCI_SPI
+	tristate "STMicroelectronics ST NCI NFC driver (SPI)"
+	depends on NFC_NCI && SPI
+	select NFC_ST_NCI
+	---help---
+	  This module adds support for an SPI interface to the
+	  STMicroelectronics NFC NCI chips family.
+	  Select this if your platform is using the spi bus.
+
+	  If you choose to build a module, it'll be called st-nci_spi.
+	  Say N if unsure.
diff --git a/drivers/nfc/st-nci/Makefile b/drivers/nfc/st-nci/Makefile
new file mode 100644
index 000000000..e0310743f
--- /dev/null
+++ b/drivers/nfc/st-nci/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for ST_NCI NCI based NFC driver
+#
+
+st-nci-objs = ndlc.o core.o se.o vendor_cmds.o
+obj-$(CONFIG_NFC_ST_NCI)     += st-nci.o
+
+st-nci_i2c-objs = i2c.o
+obj-$(CONFIG_NFC_ST_NCI_I2C) += st-nci_i2c.o
+
+st-nci_spi-objs = spi.o
+obj-$(CONFIG_NFC_ST_NCI_SPI) += st-nci_spi.o
diff --git a/drivers/nfc/st-nci/core.c b/drivers/nfc/st-nci/core.c
new file mode 100644
index 000000000..c693128ee
--- /dev/null
+++ b/drivers/nfc/st-nci/core.c
@@ -0,0 +1,187 @@
+/*
+ * NCI based Driver for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014-2015  STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include "st-nci.h"
+
+#define DRIVER_DESC "NCI NFC driver for ST_NCI"
+
+#define ST_NCI1_X_PROPRIETARY_ISO15693 0x83
+
+static int st_nci_init(struct nci_dev *ndev)
+{
+	struct nci_mode_set_cmd cmd;
+
+	cmd.cmd_type = ST_NCI_SET_NFC_MODE;
+	cmd.mode = 1;
+
+	return nci_prop_cmd(ndev, ST_NCI_CORE_PROP,
+			sizeof(struct nci_mode_set_cmd), (__u8 *)&cmd);
+}
+
+static int st_nci_open(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	int r;
+
+	if (test_and_set_bit(ST_NCI_RUNNING, &info->flags))
+		return 0;
+
+	r = ndlc_open(info->ndlc);
+	if (r)
+		clear_bit(ST_NCI_RUNNING, &info->flags);
+
+	return r;
+}
+
+static int st_nci_close(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	if (!test_bit(ST_NCI_RUNNING, &info->flags))
+		return 0;
+
+	ndlc_close(info->ndlc);
+
+	clear_bit(ST_NCI_RUNNING, &info->flags);
+
+	return 0;
+}
+
+static int st_nci_send(struct nci_dev *ndev, struct sk_buff *skb)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	skb->dev = (void *)ndev;
+
+	if (!test_bit(ST_NCI_RUNNING, &info->flags))
+		return -EBUSY;
+
+	return ndlc_send(info->ndlc, skb);
+}
+
+static __u32 st_nci_get_rfprotocol(struct nci_dev *ndev,
+					 __u8 rf_protocol)
+{
+	return rf_protocol == ST_NCI1_X_PROPRIETARY_ISO15693 ?
+		NFC_PROTO_ISO15693_MASK : 0;
+}
+
+static int st_nci_prop_rsp_packet(struct nci_dev *ndev,
+					struct sk_buff *skb)
+{
+	__u8 status = skb->data[0];
+
+	nci_req_complete(ndev, status);
+	return 0;
+}
+
+static struct nci_driver_ops st_nci_prop_ops[] = {
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROPRIETARY,
+					  ST_NCI_CORE_PROP),
+		.rsp = st_nci_prop_rsp_packet,
+	},
+};
+
+static struct nci_ops st_nci_ops = {
+	.init = st_nci_init,
+	.open = st_nci_open,
+	.close = st_nci_close,
+	.send = st_nci_send,
+	.get_rfprotocol = st_nci_get_rfprotocol,
+	.discover_se = st_nci_discover_se,
+	.enable_se = st_nci_enable_se,
+	.disable_se = st_nci_disable_se,
+	.se_io = st_nci_se_io,
+	.hci_load_session = st_nci_hci_load_session,
+	.hci_event_received = st_nci_hci_event_received,
+	.hci_cmd_received = st_nci_hci_cmd_received,
+	.prop_ops = st_nci_prop_ops,
+	.n_prop_ops = ARRAY_SIZE(st_nci_prop_ops),
+};
+
+int st_nci_probe(struct llt_ndlc *ndlc, int phy_headroom,
+		 int phy_tailroom, struct st_nci_se_status *se_status)
+{
+	struct st_nci_info *info;
+	int r;
+	u32 protocols;
+
+	info = devm_kzalloc(ndlc->dev,
+			sizeof(struct st_nci_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	protocols = NFC_PROTO_JEWEL_MASK
+		| NFC_PROTO_MIFARE_MASK
+		| NFC_PROTO_FELICA_MASK
+		| NFC_PROTO_ISO14443_MASK
+		| NFC_PROTO_ISO14443_B_MASK
+		| NFC_PROTO_ISO15693_MASK
+		| NFC_PROTO_NFC_DEP_MASK;
+
+	ndlc->ndev = nci_allocate_device(&st_nci_ops, protocols,
+					phy_headroom, phy_tailroom);
+	if (!ndlc->ndev) {
+		pr_err("Cannot allocate nfc ndev\n");
+		return -ENOMEM;
+	}
+	info->ndlc = ndlc;
+
+	nci_set_drvdata(ndlc->ndev, info);
+
+	r = st_nci_vendor_cmds_init(ndlc->ndev);
+	if (r) {
+		pr_err("Cannot register proprietary vendor cmds\n");
+		goto err_reg_dev;
+	}
+
+	r = nci_register_device(ndlc->ndev);
+	if (r) {
+		pr_err("Cannot register nfc device to nci core\n");
+		goto err_reg_dev;
+	}
+
+	return st_nci_se_init(ndlc->ndev, se_status);
+
+err_reg_dev:
+	nci_free_device(ndlc->ndev);
+	return r;
+}
+EXPORT_SYMBOL_GPL(st_nci_probe);
+
+void st_nci_remove(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	ndlc_close(info->ndlc);
+
+	nci_unregister_device(ndev);
+	nci_free_device(ndev);
+}
+EXPORT_SYMBOL_GPL(st_nci_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/st-nci/i2c.c b/drivers/nfc/st-nci/i2c.c
new file mode 100644
index 000000000..f9525ef87
--- /dev/null
+++ b/drivers/nfc/st-nci/i2c.c
@@ -0,0 +1,316 @@
+/*
+ * I2C Link Layer for ST NCI NFC controller familly based Driver
+ * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/nfc.h>
+#include <linux/of.h>
+
+#include "st-nci.h"
+
+#define DRIVER_DESC "NCI NFC driver for ST_NCI"
+
+/* ndlc header */
+#define ST_NCI_FRAME_HEADROOM 1
+#define ST_NCI_FRAME_TAILROOM 0
+
+#define ST_NCI_I2C_MIN_SIZE 4   /* PCB(1) + NCI Packet header(3) */
+#define ST_NCI_I2C_MAX_SIZE 250 /* req 4.2.1 */
+
+#define ST_NCI_DRIVER_NAME "st_nci"
+#define ST_NCI_I2C_DRIVER_NAME "st_nci_i2c"
+
+struct st_nci_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct llt_ndlc *ndlc;
+
+	bool irq_active;
+
+	struct gpio_desc *gpiod_reset;
+
+	struct st_nci_se_status se_status;
+};
+
+static int st_nci_i2c_enable(void *phy_id)
+{
+	struct st_nci_i2c_phy *phy = phy_id;
+
+	gpiod_set_value(phy->gpiod_reset, 0);
+	usleep_range(10000, 15000);
+	gpiod_set_value(phy->gpiod_reset, 1);
+	usleep_range(80000, 85000);
+
+	if (phy->ndlc->powered == 0 && phy->irq_active == 0) {
+		enable_irq(phy->i2c_dev->irq);
+		phy->irq_active = true;
+	}
+
+	return 0;
+}
+
+static void st_nci_i2c_disable(void *phy_id)
+{
+	struct st_nci_i2c_phy *phy = phy_id;
+
+	disable_irq_nosync(phy->i2c_dev->irq);
+	phy->irq_active = false;
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int st_nci_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+	int r = -1;
+	struct st_nci_i2c_phy *phy = phy_id;
+	struct i2c_client *client = phy->i2c_dev;
+
+	if (phy->ndlc->hard_fault != 0)
+		return phy->ndlc->hard_fault;
+
+	r = i2c_master_send(client, skb->data, skb->len);
+	if (r < 0) {  /* Retry, chip was in standby */
+		usleep_range(1000, 4000);
+		r = i2c_master_send(client, skb->data, skb->len);
+	}
+
+	if (r >= 0) {
+		if (r != skb->len)
+			r = -EREMOTEIO;
+		else
+			r = 0;
+	}
+
+	return r;
+}
+
+/*
+ * Reads an ndlc frame and returns it in a newly allocated sk_buff.
+ * returns:
+ * 0 : if received frame is complete
+ * -EREMOTEIO : i2c read error (fatal)
+ * -EBADMSG : frame was incorrect and discarded
+ * -ENOMEM : cannot allocate skb, frame dropped
+ */
+static int st_nci_i2c_read(struct st_nci_i2c_phy *phy,
+				 struct sk_buff **skb)
+{
+	int r;
+	u8 len;
+	u8 buf[ST_NCI_I2C_MAX_SIZE];
+	struct i2c_client *client = phy->i2c_dev;
+
+	r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE);
+	if (r < 0) {  /* Retry, chip was in standby */
+		usleep_range(1000, 4000);
+		r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE);
+	}
+
+	if (r != ST_NCI_I2C_MIN_SIZE)
+		return -EREMOTEIO;
+
+	len = be16_to_cpu(*(__be16 *) (buf + 2));
+	if (len > ST_NCI_I2C_MAX_SIZE) {
+		nfc_err(&client->dev, "invalid frame len\n");
+		return -EBADMSG;
+	}
+
+	*skb = alloc_skb(ST_NCI_I2C_MIN_SIZE + len, GFP_KERNEL);
+	if (*skb == NULL)
+		return -ENOMEM;
+
+	skb_reserve(*skb, ST_NCI_I2C_MIN_SIZE);
+	skb_put(*skb, ST_NCI_I2C_MIN_SIZE);
+	memcpy((*skb)->data, buf, ST_NCI_I2C_MIN_SIZE);
+
+	if (!len)
+		return 0;
+
+	r = i2c_master_recv(client, buf, len);
+	if (r != len) {
+		kfree_skb(*skb);
+		return -EREMOTEIO;
+	}
+
+	skb_put(*skb, len);
+	memcpy((*skb)->data + ST_NCI_I2C_MIN_SIZE, buf, len);
+
+	return 0;
+}
+
+/*
+ * Reads an ndlc frame from the chip.
+ *
+ * On ST_NCI, IRQ goes in idle state when read starts.
+ */
+static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id)
+{
+	struct st_nci_i2c_phy *phy = phy_id;
+	struct i2c_client *client;
+	struct sk_buff *skb = NULL;
+	int r;
+
+	if (!phy || !phy->ndlc || irq != phy->i2c_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	client = phy->i2c_dev;
+	dev_dbg(&client->dev, "IRQ\n");
+
+	if (phy->ndlc->hard_fault)
+		return IRQ_HANDLED;
+
+	if (!phy->ndlc->powered) {
+		st_nci_i2c_disable(phy);
+		return IRQ_HANDLED;
+	}
+
+	r = st_nci_i2c_read(phy, &skb);
+	if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
+		return IRQ_HANDLED;
+
+	ndlc_recv(phy->ndlc, skb);
+
+	return IRQ_HANDLED;
+}
+
+static struct nfc_phy_ops i2c_phy_ops = {
+	.write = st_nci_i2c_write,
+	.enable = st_nci_i2c_enable,
+	.disable = st_nci_i2c_disable,
+};
+
+static const struct acpi_gpio_params reset_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_st_nci_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1 },
+	{},
+};
+
+static int st_nci_i2c_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct st_nci_i2c_phy *phy;
+	int r;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+	dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(dev, sizeof(struct st_nci_i2c_phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->i2c_dev = client;
+
+	i2c_set_clientdata(client, phy);
+
+	r = devm_acpi_dev_add_driver_gpios(dev, acpi_st_nci_gpios);
+	if (r)
+		dev_dbg(dev, "Unable to add GPIO mapping table\n");
+
+	/* Get RESET GPIO */
+	phy->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(phy->gpiod_reset)) {
+		nfc_err(dev, "Unable to get RESET GPIO\n");
+		return -ENODEV;
+	}
+
+	phy->se_status.is_ese_present =
+				device_property_read_bool(dev, "ese-present");
+	phy->se_status.is_uicc_present =
+				device_property_read_bool(dev, "uicc-present");
+
+	r = ndlc_probe(phy, &i2c_phy_ops, &client->dev,
+			ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM,
+			&phy->ndlc, &phy->se_status);
+	if (r < 0) {
+		nfc_err(&client->dev, "Unable to register ndlc layer\n");
+		return r;
+	}
+
+	phy->irq_active = true;
+	r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+				st_nci_irq_thread_fn,
+				IRQF_ONESHOT,
+				ST_NCI_DRIVER_NAME, phy);
+	if (r < 0)
+		nfc_err(&client->dev, "Unable to register IRQ handler\n");
+
+	return r;
+}
+
+static int st_nci_i2c_remove(struct i2c_client *client)
+{
+	struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	ndlc_remove(phy->ndlc);
+
+	return 0;
+}
+
+static const struct i2c_device_id st_nci_i2c_id_table[] = {
+	{ST_NCI_DRIVER_NAME, 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, st_nci_i2c_id_table);
+
+static const struct acpi_device_id st_nci_i2c_acpi_match[] = {
+	{"SMO2101"},
+	{"SMO2102"},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, st_nci_i2c_acpi_match);
+
+static const struct of_device_id of_st_nci_i2c_match[] = {
+	{ .compatible = "st,st21nfcb-i2c", },
+	{ .compatible = "st,st21nfcb_i2c", },
+	{ .compatible = "st,st21nfcc-i2c", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_st_nci_i2c_match);
+
+static struct i2c_driver st_nci_i2c_driver = {
+	.driver = {
+		.name = ST_NCI_I2C_DRIVER_NAME,
+		.of_match_table = of_match_ptr(of_st_nci_i2c_match),
+		.acpi_match_table = ACPI_PTR(st_nci_i2c_acpi_match),
+	},
+	.probe = st_nci_i2c_probe,
+	.id_table = st_nci_i2c_id_table,
+	.remove = st_nci_i2c_remove,
+};
+module_i2c_driver(st_nci_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/st-nci/ndlc.c b/drivers/nfc/st-nci/ndlc.c
new file mode 100644
index 000000000..f26d938d2
--- /dev/null
+++ b/drivers/nfc/st-nci/ndlc.c
@@ -0,0 +1,311 @@
+/*
+ * Low Level Transport (NDLC) Driver for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014-2015  STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/sched.h>
+#include <net/nfc/nci_core.h>
+
+#include "st-nci.h"
+
+#define NDLC_TIMER_T1		100
+#define NDLC_TIMER_T1_WAIT	400
+#define NDLC_TIMER_T2		1200
+
+#define PCB_TYPE_DATAFRAME		0x80
+#define PCB_TYPE_SUPERVISOR		0xc0
+#define PCB_TYPE_MASK			PCB_TYPE_SUPERVISOR
+
+#define PCB_SYNC_ACK			0x20
+#define PCB_SYNC_NACK			0x10
+#define PCB_SYNC_WAIT			0x30
+#define PCB_SYNC_NOINFO			0x00
+#define PCB_SYNC_MASK			PCB_SYNC_WAIT
+
+#define PCB_DATAFRAME_RETRANSMIT_YES	0x00
+#define PCB_DATAFRAME_RETRANSMIT_NO	0x04
+#define PCB_DATAFRAME_RETRANSMIT_MASK	PCB_DATAFRAME_RETRANSMIT_NO
+
+#define PCB_SUPERVISOR_RETRANSMIT_YES	0x00
+#define PCB_SUPERVISOR_RETRANSMIT_NO	0x02
+#define PCB_SUPERVISOR_RETRANSMIT_MASK	PCB_SUPERVISOR_RETRANSMIT_NO
+
+#define PCB_FRAME_CRC_INFO_PRESENT	0x08
+#define PCB_FRAME_CRC_INFO_NOTPRESENT	0x00
+#define PCB_FRAME_CRC_INFO_MASK		PCB_FRAME_CRC_INFO_PRESENT
+
+#define NDLC_DUMP_SKB(info, skb)                                 \
+do {                                                             \
+	pr_debug("%s:\n", info);                                 \
+	print_hex_dump(KERN_DEBUG, "ndlc: ", DUMP_PREFIX_OFFSET, \
+			16, 1, skb->data, skb->len, 0);          \
+} while (0)
+
+int ndlc_open(struct llt_ndlc *ndlc)
+{
+	/* toggle reset pin */
+	ndlc->ops->enable(ndlc->phy_id);
+	ndlc->powered = 1;
+	return 0;
+}
+EXPORT_SYMBOL(ndlc_open);
+
+void ndlc_close(struct llt_ndlc *ndlc)
+{
+	struct nci_mode_set_cmd cmd;
+
+	cmd.cmd_type = ST_NCI_SET_NFC_MODE;
+	cmd.mode = 0;
+
+	/* toggle reset pin */
+	ndlc->ops->enable(ndlc->phy_id);
+
+	nci_prop_cmd(ndlc->ndev, ST_NCI_CORE_PROP,
+		     sizeof(struct nci_mode_set_cmd), (__u8 *)&cmd);
+
+	ndlc->powered = 0;
+	ndlc->ops->disable(ndlc->phy_id);
+}
+EXPORT_SYMBOL(ndlc_close);
+
+int ndlc_send(struct llt_ndlc *ndlc, struct sk_buff *skb)
+{
+	/* add ndlc header */
+	u8 pcb = PCB_TYPE_DATAFRAME | PCB_DATAFRAME_RETRANSMIT_NO |
+		PCB_FRAME_CRC_INFO_NOTPRESENT;
+
+	*(u8 *)skb_push(skb, 1) = pcb;
+	skb_queue_tail(&ndlc->send_q, skb);
+
+	schedule_work(&ndlc->sm_work);
+
+	return 0;
+}
+EXPORT_SYMBOL(ndlc_send);
+
+static void llt_ndlc_send_queue(struct llt_ndlc *ndlc)
+{
+	struct sk_buff *skb;
+	int r;
+	unsigned long time_sent;
+
+	if (ndlc->send_q.qlen)
+		pr_debug("sendQlen=%d unackQlen=%d\n",
+			 ndlc->send_q.qlen, ndlc->ack_pending_q.qlen);
+
+	while (ndlc->send_q.qlen) {
+		skb = skb_dequeue(&ndlc->send_q);
+		NDLC_DUMP_SKB("ndlc frame written", skb);
+		r = ndlc->ops->write(ndlc->phy_id, skb);
+		if (r < 0) {
+			ndlc->hard_fault = r;
+			break;
+		}
+		time_sent = jiffies;
+		*(unsigned long *)skb->cb = time_sent;
+
+		skb_queue_tail(&ndlc->ack_pending_q, skb);
+
+		/* start timer t1 for ndlc aknowledge */
+		ndlc->t1_active = true;
+		mod_timer(&ndlc->t1_timer, time_sent +
+			msecs_to_jiffies(NDLC_TIMER_T1));
+		/* start timer t2 for chip availability */
+		ndlc->t2_active = true;
+		mod_timer(&ndlc->t2_timer, time_sent +
+			msecs_to_jiffies(NDLC_TIMER_T2));
+	}
+}
+
+static void llt_ndlc_requeue_data_pending(struct llt_ndlc *ndlc)
+{
+	struct sk_buff *skb;
+	u8 pcb;
+
+	while ((skb = skb_dequeue_tail(&ndlc->ack_pending_q))) {
+		pcb = skb->data[0];
+		switch (pcb & PCB_TYPE_MASK) {
+		case PCB_TYPE_SUPERVISOR:
+			skb->data[0] = (pcb & ~PCB_SUPERVISOR_RETRANSMIT_MASK) |
+				PCB_SUPERVISOR_RETRANSMIT_YES;
+			break;
+		case PCB_TYPE_DATAFRAME:
+			skb->data[0] = (pcb & ~PCB_DATAFRAME_RETRANSMIT_MASK) |
+				PCB_DATAFRAME_RETRANSMIT_YES;
+			break;
+		default:
+			pr_err("UNKNOWN Packet Control Byte=%d\n", pcb);
+			kfree_skb(skb);
+			continue;
+		}
+		skb_queue_head(&ndlc->send_q, skb);
+	}
+}
+
+static void llt_ndlc_rcv_queue(struct llt_ndlc *ndlc)
+{
+	struct sk_buff *skb;
+	u8 pcb;
+	unsigned long time_sent;
+
+	if (ndlc->rcv_q.qlen)
+		pr_debug("rcvQlen=%d\n", ndlc->rcv_q.qlen);
+
+	while ((skb = skb_dequeue(&ndlc->rcv_q)) != NULL) {
+		pcb = skb->data[0];
+		skb_pull(skb, 1);
+		if ((pcb & PCB_TYPE_MASK) == PCB_TYPE_SUPERVISOR) {
+			switch (pcb & PCB_SYNC_MASK) {
+			case PCB_SYNC_ACK:
+				skb = skb_dequeue(&ndlc->ack_pending_q);
+				kfree_skb(skb);
+				del_timer_sync(&ndlc->t1_timer);
+				del_timer_sync(&ndlc->t2_timer);
+				ndlc->t2_active = false;
+				ndlc->t1_active = false;
+				break;
+			case PCB_SYNC_NACK:
+				llt_ndlc_requeue_data_pending(ndlc);
+				llt_ndlc_send_queue(ndlc);
+				/* start timer t1 for ndlc aknowledge */
+				time_sent = jiffies;
+				ndlc->t1_active = true;
+				mod_timer(&ndlc->t1_timer, time_sent +
+					msecs_to_jiffies(NDLC_TIMER_T1));
+				break;
+			case PCB_SYNC_WAIT:
+				time_sent = jiffies;
+				ndlc->t1_active = true;
+				mod_timer(&ndlc->t1_timer, time_sent +
+					  msecs_to_jiffies(NDLC_TIMER_T1_WAIT));
+				break;
+			default:
+				kfree_skb(skb);
+				break;
+			}
+		} else if ((pcb & PCB_TYPE_MASK) == PCB_TYPE_DATAFRAME) {
+			nci_recv_frame(ndlc->ndev, skb);
+		} else {
+			kfree_skb(skb);
+		}
+	}
+}
+
+static void llt_ndlc_sm_work(struct work_struct *work)
+{
+	struct llt_ndlc *ndlc = container_of(work, struct llt_ndlc, sm_work);
+
+	llt_ndlc_send_queue(ndlc);
+	llt_ndlc_rcv_queue(ndlc);
+
+	if (ndlc->t1_active && timer_pending(&ndlc->t1_timer) == 0) {
+		pr_debug
+		    ("Handle T1(recv SUPERVISOR) elapsed (T1 now inactive)\n");
+		ndlc->t1_active = false;
+
+		llt_ndlc_requeue_data_pending(ndlc);
+		llt_ndlc_send_queue(ndlc);
+	}
+
+	if (ndlc->t2_active && timer_pending(&ndlc->t2_timer) == 0) {
+		pr_debug("Handle T2(recv DATA) elapsed (T2 now inactive)\n");
+		ndlc->t2_active = false;
+		ndlc->t1_active = false;
+		del_timer_sync(&ndlc->t1_timer);
+		del_timer_sync(&ndlc->t2_timer);
+		ndlc_close(ndlc);
+		ndlc->hard_fault = -EREMOTEIO;
+	}
+}
+
+void ndlc_recv(struct llt_ndlc *ndlc, struct sk_buff *skb)
+{
+	if (skb == NULL) {
+		pr_err("NULL Frame -> link is dead\n");
+		ndlc->hard_fault = -EREMOTEIO;
+		ndlc_close(ndlc);
+	} else {
+		NDLC_DUMP_SKB("incoming frame", skb);
+		skb_queue_tail(&ndlc->rcv_q, skb);
+	}
+
+	schedule_work(&ndlc->sm_work);
+}
+EXPORT_SYMBOL(ndlc_recv);
+
+static void ndlc_t1_timeout(struct timer_list *t)
+{
+	struct llt_ndlc *ndlc = from_timer(ndlc, t, t1_timer);
+
+	pr_debug("\n");
+
+	schedule_work(&ndlc->sm_work);
+}
+
+static void ndlc_t2_timeout(struct timer_list *t)
+{
+	struct llt_ndlc *ndlc = from_timer(ndlc, t, t2_timer);
+
+	pr_debug("\n");
+
+	schedule_work(&ndlc->sm_work);
+}
+
+int ndlc_probe(void *phy_id, struct nfc_phy_ops *phy_ops, struct device *dev,
+	       int phy_headroom, int phy_tailroom, struct llt_ndlc **ndlc_id,
+	       struct st_nci_se_status *se_status)
+{
+	struct llt_ndlc *ndlc;
+
+	ndlc = devm_kzalloc(dev, sizeof(struct llt_ndlc), GFP_KERNEL);
+	if (!ndlc)
+		return -ENOMEM;
+
+	ndlc->ops = phy_ops;
+	ndlc->phy_id = phy_id;
+	ndlc->dev = dev;
+	ndlc->powered = 0;
+
+	*ndlc_id = ndlc;
+
+	/* initialize timers */
+	timer_setup(&ndlc->t1_timer, ndlc_t1_timeout, 0);
+	timer_setup(&ndlc->t2_timer, ndlc_t2_timeout, 0);
+
+	skb_queue_head_init(&ndlc->rcv_q);
+	skb_queue_head_init(&ndlc->send_q);
+	skb_queue_head_init(&ndlc->ack_pending_q);
+
+	INIT_WORK(&ndlc->sm_work, llt_ndlc_sm_work);
+
+	return st_nci_probe(ndlc, phy_headroom, phy_tailroom, se_status);
+}
+EXPORT_SYMBOL(ndlc_probe);
+
+void ndlc_remove(struct llt_ndlc *ndlc)
+{
+	st_nci_remove(ndlc->ndev);
+
+	/* cancel timers */
+	del_timer_sync(&ndlc->t1_timer);
+	del_timer_sync(&ndlc->t2_timer);
+	ndlc->t2_active = false;
+	ndlc->t1_active = false;
+
+	skb_queue_purge(&ndlc->rcv_q);
+	skb_queue_purge(&ndlc->send_q);
+}
+EXPORT_SYMBOL(ndlc_remove);
diff --git a/drivers/nfc/st-nci/ndlc.h b/drivers/nfc/st-nci/ndlc.h
new file mode 100644
index 000000000..bdf78ffd5
--- /dev/null
+++ b/drivers/nfc/st-nci/ndlc.h
@@ -0,0 +1,63 @@
+/*
+ * NCI based Driver for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014-2015  STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_NDLC_H_
+#define __LOCAL_NDLC_H_
+
+#include <linux/skbuff.h>
+#include <net/nfc/nfc.h>
+
+struct st_nci_se_status;
+
+/* Low Level Transport description */
+struct llt_ndlc {
+	struct nci_dev *ndev;
+	struct nfc_phy_ops *ops;
+	void *phy_id;
+
+	struct timer_list t1_timer;
+	bool t1_active;
+
+	struct timer_list t2_timer;
+	bool t2_active;
+
+	struct sk_buff_head rcv_q;
+	struct sk_buff_head send_q;
+	struct sk_buff_head ack_pending_q;
+
+	struct work_struct sm_work;
+
+	struct device *dev;
+
+	/*
+	 * < 0 if hardware error occurred
+	 * and prevents normal operation.
+	 */
+	int hard_fault;
+	int powered;
+};
+
+int ndlc_open(struct llt_ndlc *ndlc);
+void ndlc_close(struct llt_ndlc *ndlc);
+int ndlc_send(struct llt_ndlc *ndlc, struct sk_buff *skb);
+void ndlc_recv(struct llt_ndlc *ndlc, struct sk_buff *skb);
+int ndlc_probe(void *phy_id, struct nfc_phy_ops *phy_ops, struct device *dev,
+	       int phy_headroom, int phy_tailroom, struct llt_ndlc **ndlc_id,
+	       struct st_nci_se_status *se_status);
+void ndlc_remove(struct llt_ndlc *ndlc);
+#endif /* __LOCAL_NDLC_H__ */
diff --git a/drivers/nfc/st-nci/se.c b/drivers/nfc/st-nci/se.c
new file mode 100644
index 000000000..5d6e7e931
--- /dev/null
+++ b/drivers/nfc/st-nci/se.c
@@ -0,0 +1,762 @@
+/*
+ * Secure Element driver for STMicroelectronics NFC NCI chip
+ *
+ * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <linux/delay.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+
+#include "st-nci.h"
+
+struct st_nci_pipe_info {
+	u8 pipe_state;
+	u8 src_host_id;
+	u8 src_gate_id;
+	u8 dst_host_id;
+	u8 dst_gate_id;
+} __packed;
+
+/* Hosts */
+#define ST_NCI_HOST_CONTROLLER_ID     0x00
+#define ST_NCI_TERMINAL_HOST_ID       0x01
+#define ST_NCI_UICC_HOST_ID           0x02
+#define ST_NCI_ESE_HOST_ID            0xc0
+
+/* Gates */
+#define ST_NCI_APDU_READER_GATE       0xf0
+#define ST_NCI_CONNECTIVITY_GATE      0x41
+
+/* Pipes */
+#define ST_NCI_DEVICE_MGNT_PIPE               0x02
+
+/* Connectivity pipe only */
+#define ST_NCI_SE_COUNT_PIPE_UICC             0x01
+/* Connectivity + APDU Reader pipe */
+#define ST_NCI_SE_COUNT_PIPE_EMBEDDED         0x02
+
+#define ST_NCI_SE_TO_HOT_PLUG			1000 /* msecs */
+#define ST_NCI_SE_TO_PIPES			2000
+
+#define ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(x)   (x->data[0] & 0x80)
+
+#define NCI_HCI_APDU_PARAM_ATR                     0x01
+#define NCI_HCI_ADMIN_PARAM_SESSION_IDENTITY       0x01
+#define NCI_HCI_ADMIN_PARAM_WHITELIST              0x03
+#define NCI_HCI_ADMIN_PARAM_HOST_LIST              0x04
+
+#define ST_NCI_EVT_SE_HARD_RESET		0x20
+#define ST_NCI_EVT_TRANSMIT_DATA		0x10
+#define ST_NCI_EVT_WTX_REQUEST			0x11
+#define ST_NCI_EVT_SE_SOFT_RESET		0x11
+#define ST_NCI_EVT_SE_END_OF_APDU_TRANSFER	0x21
+#define ST_NCI_EVT_HOT_PLUG			0x03
+
+#define ST_NCI_SE_MODE_OFF                    0x00
+#define ST_NCI_SE_MODE_ON                     0x01
+
+#define ST_NCI_EVT_CONNECTIVITY       0x10
+#define ST_NCI_EVT_TRANSACTION        0x12
+
+#define ST_NCI_DM_GETINFO             0x13
+#define ST_NCI_DM_GETINFO_PIPE_LIST   0x02
+#define ST_NCI_DM_GETINFO_PIPE_INFO   0x01
+#define ST_NCI_DM_PIPE_CREATED        0x02
+#define ST_NCI_DM_PIPE_OPEN           0x04
+#define ST_NCI_DM_RF_ACTIVE           0x80
+#define ST_NCI_DM_DISCONNECT          0x30
+
+#define ST_NCI_DM_IS_PIPE_OPEN(p) \
+	((p & 0x0f) == (ST_NCI_DM_PIPE_CREATED | ST_NCI_DM_PIPE_OPEN))
+
+#define ST_NCI_ATR_DEFAULT_BWI        0x04
+
+/*
+ * WT = 2^BWI/10[s], convert into msecs and add a secure
+ * room by increasing by 2 this timeout
+ */
+#define ST_NCI_BWI_TO_TIMEOUT(x)      ((1 << x) * 200)
+#define ST_NCI_ATR_GET_Y_FROM_TD(x)   (x >> 4)
+
+/* If TA is present bit 0 is set */
+#define ST_NCI_ATR_TA_PRESENT(x) (x & 0x01)
+/* If TB is present bit 1 is set */
+#define ST_NCI_ATR_TB_PRESENT(x) (x & 0x02)
+
+#define ST_NCI_NUM_DEVICES           256
+
+static DECLARE_BITMAP(dev_mask, ST_NCI_NUM_DEVICES);
+
+/* Here are the mandatory pipe for st_nci */
+static struct nci_hci_gate st_nci_gates[] = {
+	{NCI_HCI_ADMIN_GATE, NCI_HCI_ADMIN_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+	{NCI_HCI_LINK_MGMT_GATE, NCI_HCI_LINK_MGMT_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+	{ST_NCI_DEVICE_MGNT_GATE, ST_NCI_DEVICE_MGNT_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+
+	{NCI_HCI_IDENTITY_MGMT_GATE, NCI_HCI_INVALID_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+
+	/* Secure element pipes are created by secure element host */
+	{ST_NCI_CONNECTIVITY_GATE, NCI_HCI_DO_NOT_OPEN_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+	{ST_NCI_APDU_READER_GATE, NCI_HCI_DO_NOT_OPEN_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+};
+
+static u8 st_nci_se_get_bwi(struct nci_dev *ndev)
+{
+	int i;
+	u8 td;
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	/* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */
+	for (i = 1; i < ST_NCI_ESE_MAX_LENGTH; i++) {
+		td = ST_NCI_ATR_GET_Y_FROM_TD(info->se_info.atr[i]);
+		if (ST_NCI_ATR_TA_PRESENT(td))
+			i++;
+		if (ST_NCI_ATR_TB_PRESENT(td)) {
+			i++;
+			return info->se_info.atr[i] >> 4;
+		}
+	}
+	return ST_NCI_ATR_DEFAULT_BWI;
+}
+
+static void st_nci_se_get_atr(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	int r;
+	struct sk_buff *skb;
+
+	r = nci_hci_get_param(ndev, ST_NCI_APDU_READER_GATE,
+				NCI_HCI_APDU_PARAM_ATR, &skb);
+	if (r < 0)
+		return;
+
+	if (skb->len <= ST_NCI_ESE_MAX_LENGTH) {
+		memcpy(info->se_info.atr, skb->data, skb->len);
+
+		info->se_info.wt_timeout =
+			ST_NCI_BWI_TO_TIMEOUT(st_nci_se_get_bwi(ndev));
+	}
+	kfree_skb(skb);
+}
+
+int st_nci_hci_load_session(struct nci_dev *ndev)
+{
+	int i, j, r;
+	struct sk_buff *skb_pipe_list, *skb_pipe_info;
+	struct st_nci_pipe_info *dm_pipe_info;
+	u8 pipe_list[] = { ST_NCI_DM_GETINFO_PIPE_LIST,
+			ST_NCI_TERMINAL_HOST_ID};
+	u8 pipe_info[] = { ST_NCI_DM_GETINFO_PIPE_INFO,
+			ST_NCI_TERMINAL_HOST_ID, 0};
+
+	/* On ST_NCI device pipes number are dynamics
+	 * If pipes are already created, hci_dev_up will fail.
+	 * Doing a clear all pipe is a bad idea because:
+	 * - It does useless EEPROM cycling
+	 * - It might cause issue for secure elements support
+	 * (such as removing connectivity or APDU reader pipe)
+	 * A better approach on ST_NCI is to:
+	 * - get a pipe list for each host.
+	 * (eg: ST_NCI_HOST_CONTROLLER_ID for now).
+	 * (TODO Later on UICC HOST and eSE HOST)
+	 * - get pipe information
+	 * - match retrieved pipe list in st_nci_gates
+	 * ST_NCI_DEVICE_MGNT_GATE is a proprietary gate
+	 * with ST_NCI_DEVICE_MGNT_PIPE.
+	 * Pipe can be closed and need to be open.
+	 */
+	r = nci_hci_connect_gate(ndev, ST_NCI_HOST_CONTROLLER_ID,
+				ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_DEVICE_MGNT_PIPE);
+	if (r < 0)
+		return r;
+
+	/* Get pipe list */
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			ST_NCI_DM_GETINFO, pipe_list, sizeof(pipe_list),
+			&skb_pipe_list);
+	if (r < 0)
+		return r;
+
+	/* Complete the existing gate_pipe table */
+	for (i = 0; i < skb_pipe_list->len; i++) {
+		pipe_info[2] = skb_pipe_list->data[i];
+		r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+					ST_NCI_DM_GETINFO, pipe_info,
+					sizeof(pipe_info), &skb_pipe_info);
+
+		if (r)
+			continue;
+
+		/*
+		 * Match pipe ID and gate ID
+		 * Output format from ST21NFC_DM_GETINFO is:
+		 * - pipe state (1byte)
+		 * - source hid (1byte)
+		 * - source gid (1byte)
+		 * - destination hid (1byte)
+		 * - destination gid (1byte)
+		 */
+		dm_pipe_info = (struct st_nci_pipe_info *)skb_pipe_info->data;
+		if (dm_pipe_info->dst_gate_id == ST_NCI_APDU_READER_GATE &&
+		    dm_pipe_info->src_host_id == ST_NCI_UICC_HOST_ID) {
+			pr_err("Unexpected apdu_reader pipe on host %x\n",
+			       dm_pipe_info->src_host_id);
+			kfree_skb(skb_pipe_info);
+			continue;
+		}
+
+		for (j = 3; (j < ARRAY_SIZE(st_nci_gates)) &&
+		     (st_nci_gates[j].gate != dm_pipe_info->dst_gate_id); j++)
+			;
+
+		if (j < ARRAY_SIZE(st_nci_gates) &&
+		    st_nci_gates[j].gate == dm_pipe_info->dst_gate_id &&
+		    ST_NCI_DM_IS_PIPE_OPEN(dm_pipe_info->pipe_state)) {
+			ndev->hci_dev->init_data.gates[j].pipe = pipe_info[2];
+
+			ndev->hci_dev->gate2pipe[st_nci_gates[j].gate] =
+						pipe_info[2];
+			ndev->hci_dev->pipes[pipe_info[2]].gate =
+						st_nci_gates[j].gate;
+			ndev->hci_dev->pipes[pipe_info[2]].host =
+						dm_pipe_info->src_host_id;
+		}
+		kfree_skb(skb_pipe_info);
+	}
+
+	/*
+	 * 3 gates have a well known pipe ID. Only NCI_HCI_LINK_MGMT_GATE
+	 * is not yet open at this stage.
+	 */
+	r = nci_hci_connect_gate(ndev, ST_NCI_HOST_CONTROLLER_ID,
+				 NCI_HCI_LINK_MGMT_GATE,
+				 NCI_HCI_LINK_MGMT_PIPE);
+
+	kfree_skb(skb_pipe_list);
+	return r;
+}
+EXPORT_SYMBOL_GPL(st_nci_hci_load_session);
+
+static void st_nci_hci_admin_event_received(struct nci_dev *ndev,
+					      u8 event, struct sk_buff *skb)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	switch (event) {
+	case ST_NCI_EVT_HOT_PLUG:
+		if (info->se_info.se_active) {
+			if (!ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(skb)) {
+				del_timer_sync(&info->se_info.se_active_timer);
+				info->se_info.se_active = false;
+				complete(&info->se_info.req_completion);
+			} else {
+				mod_timer(&info->se_info.se_active_timer,
+				      jiffies +
+				      msecs_to_jiffies(ST_NCI_SE_TO_PIPES));
+			}
+		}
+	break;
+	default:
+		nfc_err(&ndev->nfc_dev->dev, "Unexpected event on admin gate\n");
+	}
+}
+
+static int st_nci_hci_apdu_reader_event_received(struct nci_dev *ndev,
+						   u8 event,
+						   struct sk_buff *skb)
+{
+	int r = 0;
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	pr_debug("apdu reader gate event: %x\n", event);
+
+	switch (event) {
+	case ST_NCI_EVT_TRANSMIT_DATA:
+		del_timer_sync(&info->se_info.bwi_timer);
+		info->se_info.bwi_active = false;
+		info->se_info.cb(info->se_info.cb_context,
+				 skb->data, skb->len, 0);
+	break;
+	case ST_NCI_EVT_WTX_REQUEST:
+		mod_timer(&info->se_info.bwi_timer, jiffies +
+			  msecs_to_jiffies(info->se_info.wt_timeout));
+	break;
+	default:
+		nfc_err(&ndev->nfc_dev->dev, "Unexpected event on apdu reader gate\n");
+		return 1;
+	}
+
+	kfree_skb(skb);
+	return r;
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the event, skb consumed
+ *    1: driver does not handle the event, please do standard processing
+ */
+static int st_nci_hci_connectivity_event_received(struct nci_dev *ndev,
+						u8 host, u8 event,
+						struct sk_buff *skb)
+{
+	int r = 0;
+	struct device *dev = &ndev->nfc_dev->dev;
+	struct nfc_evt_transaction *transaction;
+
+	pr_debug("connectivity gate event: %x\n", event);
+
+	switch (event) {
+	case ST_NCI_EVT_CONNECTIVITY:
+		r = nfc_se_connectivity(ndev->nfc_dev, host);
+	break;
+	case ST_NCI_EVT_TRANSACTION:
+		/* According to specification etsi 102 622
+		 * 11.2.2.4 EVT_TRANSACTION Table 52
+		 * Description  Tag     Length
+		 * AID          81      5 to 16
+		 * PARAMETERS   82      0 to 255
+		 */
+		if (skb->len < NFC_MIN_AID_LENGTH + 2 &&
+		    skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG)
+			return -EPROTO;
+
+		transaction = (struct nfc_evt_transaction *)devm_kzalloc(dev,
+					    skb->len - 2, GFP_KERNEL);
+		if (!transaction)
+			return -ENOMEM;
+
+		transaction->aid_len = skb->data[1];
+		memcpy(transaction->aid, &skb->data[2], transaction->aid_len);
+
+		/* Check next byte is PARAMETERS tag (82) */
+		if (skb->data[transaction->aid_len + 2] !=
+		    NFC_EVT_TRANSACTION_PARAMS_TAG)
+			return -EPROTO;
+
+		transaction->params_len = skb->data[transaction->aid_len + 3];
+		memcpy(transaction->params, skb->data +
+		       transaction->aid_len + 4, transaction->params_len);
+
+		r = nfc_se_transaction(ndev->nfc_dev, host, transaction);
+		break;
+	default:
+		nfc_err(&ndev->nfc_dev->dev, "Unexpected event on connectivity gate\n");
+		return 1;
+	}
+	kfree_skb(skb);
+	return r;
+}
+
+void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe,
+				 u8 event, struct sk_buff *skb)
+{
+	u8 gate = ndev->hci_dev->pipes[pipe].gate;
+	u8 host = ndev->hci_dev->pipes[pipe].host;
+
+	switch (gate) {
+	case NCI_HCI_ADMIN_GATE:
+		st_nci_hci_admin_event_received(ndev, event, skb);
+	break;
+	case ST_NCI_APDU_READER_GATE:
+		st_nci_hci_apdu_reader_event_received(ndev, event, skb);
+	break;
+	case ST_NCI_CONNECTIVITY_GATE:
+		st_nci_hci_connectivity_event_received(ndev, host, event, skb);
+	break;
+	}
+}
+EXPORT_SYMBOL_GPL(st_nci_hci_event_received);
+
+void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,
+			       struct sk_buff *skb)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	u8 gate = ndev->hci_dev->pipes[pipe].gate;
+
+	pr_debug("cmd: %x\n", cmd);
+
+	switch (cmd) {
+	case NCI_HCI_ANY_OPEN_PIPE:
+		if (gate != ST_NCI_APDU_READER_GATE &&
+		    ndev->hci_dev->pipes[pipe].host != ST_NCI_UICC_HOST_ID)
+			ndev->hci_dev->count_pipes++;
+
+		if (ndev->hci_dev->count_pipes ==
+		    ndev->hci_dev->expected_pipes) {
+			del_timer_sync(&info->se_info.se_active_timer);
+			info->se_info.se_active = false;
+			ndev->hci_dev->count_pipes = 0;
+			complete(&info->se_info.req_completion);
+		}
+	break;
+	}
+}
+EXPORT_SYMBOL_GPL(st_nci_hci_cmd_received);
+
+static int st_nci_control_se(struct nci_dev *ndev, u8 se_idx,
+			     u8 state)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	int r, i;
+	struct sk_buff *sk_host_list;
+	u8 host_id;
+
+	switch (se_idx) {
+	case ST_NCI_UICC_HOST_ID:
+		ndev->hci_dev->count_pipes = 0;
+		ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_UICC;
+		break;
+	case ST_NCI_ESE_HOST_ID:
+		ndev->hci_dev->count_pipes = 0;
+		ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_EMBEDDED;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Wait for an EVT_HOT_PLUG in order to
+	 * retrieve a relevant host list.
+	 */
+	reinit_completion(&info->se_info.req_completion);
+	r = nci_nfcee_mode_set(ndev, se_idx, state);
+	if (r != NCI_STATUS_OK)
+		return r;
+
+	mod_timer(&info->se_info.se_active_timer, jiffies +
+		msecs_to_jiffies(ST_NCI_SE_TO_HOT_PLUG));
+	info->se_info.se_active = true;
+
+	/* Ignore return value and check in any case the host_list */
+	wait_for_completion_interruptible(&info->se_info.req_completion);
+
+	/* There might be some "collision" after receiving a HOT_PLUG event
+	 * This may cause the CLF to not answer to the next hci command.
+	 * There is no possible synchronization to prevent this.
+	 * Adding a small delay is the only way to solve the issue.
+	 */
+	if (info->se_info.se_status->is_ese_present &&
+	    info->se_info.se_status->is_uicc_present)
+		usleep_range(15000, 20000);
+
+	r = nci_hci_get_param(ndev, NCI_HCI_ADMIN_GATE,
+			NCI_HCI_ADMIN_PARAM_HOST_LIST, &sk_host_list);
+	if (r != NCI_HCI_ANY_OK)
+		return r;
+
+	for (i = 0; i < sk_host_list->len &&
+		sk_host_list->data[i] != se_idx; i++)
+		;
+	host_id = sk_host_list->data[i];
+	kfree_skb(sk_host_list);
+	if (state == ST_NCI_SE_MODE_ON && host_id == se_idx)
+		return se_idx;
+	else if (state == ST_NCI_SE_MODE_OFF && host_id != se_idx)
+		return se_idx;
+
+	return -1;
+}
+
+int st_nci_disable_se(struct nci_dev *ndev, u32 se_idx)
+{
+	int r;
+
+	pr_debug("st_nci_disable_se\n");
+
+	/*
+	 * According to upper layer, se_idx == NFC_SE_UICC when
+	 * info->se_info.se_status->is_uicc_enable is true should never happen
+	 * Same for eSE.
+	 */
+	r = st_nci_control_se(ndev, se_idx, ST_NCI_SE_MODE_OFF);
+	if (r < 0) {
+		/* Do best effort to release SWP */
+		if (se_idx == NFC_SE_EMBEDDED) {
+			r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
+					ST_NCI_EVT_SE_END_OF_APDU_TRANSFER,
+					NULL, 0);
+		}
+		return r;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(st_nci_disable_se);
+
+int st_nci_enable_se(struct nci_dev *ndev, u32 se_idx)
+{
+	int r;
+
+	pr_debug("st_nci_enable_se\n");
+
+	/*
+	 * According to upper layer, se_idx == NFC_SE_UICC when
+	 * info->se_info.se_status->is_uicc_enable is true should never happen.
+	 * Same for eSE.
+	 */
+	r = st_nci_control_se(ndev, se_idx, ST_NCI_SE_MODE_ON);
+	if (r == ST_NCI_ESE_HOST_ID) {
+		st_nci_se_get_atr(ndev);
+		r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
+				ST_NCI_EVT_SE_SOFT_RESET, NULL, 0);
+	}
+
+	if (r < 0) {
+		/*
+		 * The activation procedure failed, the secure element
+		 * is not connected. Remove from the list.
+		 */
+		nfc_remove_se(ndev->nfc_dev, se_idx);
+		return r;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(st_nci_enable_se);
+
+static int st_nci_hci_network_init(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	struct core_conn_create_dest_spec_params *dest_params;
+	struct dest_spec_params spec_params;
+	struct nci_conn_info    *conn_info;
+	int r, dev_num;
+
+	dest_params =
+		kzalloc(sizeof(struct core_conn_create_dest_spec_params) +
+			sizeof(struct dest_spec_params), GFP_KERNEL);
+	if (dest_params == NULL) {
+		r = -ENOMEM;
+		goto exit;
+	}
+
+	dest_params->type = NCI_DESTINATION_SPECIFIC_PARAM_NFCEE_TYPE;
+	dest_params->length = sizeof(struct dest_spec_params);
+	spec_params.id = ndev->hci_dev->nfcee_id;
+	spec_params.protocol = NCI_NFCEE_INTERFACE_HCI_ACCESS;
+	memcpy(dest_params->value, &spec_params,
+	       sizeof(struct dest_spec_params));
+	r = nci_core_conn_create(ndev, NCI_DESTINATION_NFCEE, 1,
+				 sizeof(struct core_conn_create_dest_spec_params) +
+				 sizeof(struct dest_spec_params),
+				 dest_params);
+	if (r != NCI_STATUS_OK)
+		goto free_dest_params;
+
+	conn_info = ndev->hci_dev->conn_info;
+	if (!conn_info)
+		goto free_dest_params;
+
+	ndev->hci_dev->init_data.gate_count = ARRAY_SIZE(st_nci_gates);
+	memcpy(ndev->hci_dev->init_data.gates, st_nci_gates,
+	       sizeof(st_nci_gates));
+
+	/*
+	 * Session id must include the driver name + i2c bus addr
+	 * persistent info to discriminate 2 identical chips
+	 */
+	dev_num = find_first_zero_bit(dev_mask, ST_NCI_NUM_DEVICES);
+	if (dev_num >= ST_NCI_NUM_DEVICES) {
+		r = -ENODEV;
+		goto free_dest_params;
+	}
+
+	scnprintf(ndev->hci_dev->init_data.session_id,
+		  sizeof(ndev->hci_dev->init_data.session_id),
+		  "%s%2x", "ST21BH", dev_num);
+
+	r = nci_hci_dev_session_init(ndev);
+	if (r != NCI_HCI_ANY_OK)
+		goto free_dest_params;
+
+	/*
+	 * In factory mode, we prevent secure elements activation
+	 * by disabling nfcee on the current HCI connection id.
+	 * HCI will be used here only for proprietary commands.
+	 */
+	if (test_bit(ST_NCI_FACTORY_MODE, &info->flags))
+		r = nci_nfcee_mode_set(ndev,
+				       ndev->hci_dev->conn_info->dest_params->id,
+				       NCI_NFCEE_DISABLE);
+	else
+		r = nci_nfcee_mode_set(ndev,
+				       ndev->hci_dev->conn_info->dest_params->id,
+				       NCI_NFCEE_ENABLE);
+
+free_dest_params:
+	kfree(dest_params);
+
+exit:
+	return r;
+}
+
+int st_nci_discover_se(struct nci_dev *ndev)
+{
+	u8 white_list[2];
+	int r, wl_size = 0;
+	int se_count = 0;
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	pr_debug("st_nci_discover_se\n");
+
+	r = st_nci_hci_network_init(ndev);
+	if (r != 0)
+		return r;
+
+	if (test_bit(ST_NCI_FACTORY_MODE, &info->flags))
+		return 0;
+
+	if (info->se_info.se_status->is_uicc_present)
+		white_list[wl_size++] = ST_NCI_UICC_HOST_ID;
+	if (info->se_info.se_status->is_ese_present)
+		white_list[wl_size++] = ST_NCI_ESE_HOST_ID;
+
+	if (wl_size) {
+		r = nci_hci_set_param(ndev, NCI_HCI_ADMIN_GATE,
+				      NCI_HCI_ADMIN_PARAM_WHITELIST,
+				      white_list, wl_size);
+		if (r != NCI_HCI_ANY_OK)
+			return r;
+	}
+
+	if (info->se_info.se_status->is_uicc_present) {
+		nfc_add_se(ndev->nfc_dev, ST_NCI_UICC_HOST_ID, NFC_SE_UICC);
+		se_count++;
+	}
+
+	if (info->se_info.se_status->is_ese_present) {
+		nfc_add_se(ndev->nfc_dev, ST_NCI_ESE_HOST_ID, NFC_SE_EMBEDDED);
+		se_count++;
+	}
+
+	return !se_count;
+}
+EXPORT_SYMBOL_GPL(st_nci_discover_se);
+
+int st_nci_se_io(struct nci_dev *ndev, u32 se_idx,
+		       u8 *apdu, size_t apdu_length,
+		       se_io_cb_t cb, void *cb_context)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	pr_debug("\n");
+
+	switch (se_idx) {
+	case ST_NCI_ESE_HOST_ID:
+		info->se_info.cb = cb;
+		info->se_info.cb_context = cb_context;
+		mod_timer(&info->se_info.bwi_timer, jiffies +
+			  msecs_to_jiffies(info->se_info.wt_timeout));
+		info->se_info.bwi_active = true;
+		return nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
+					ST_NCI_EVT_TRANSMIT_DATA, apdu,
+					apdu_length);
+	default:
+		return -ENODEV;
+	}
+}
+EXPORT_SYMBOL(st_nci_se_io);
+
+static void st_nci_se_wt_timeout(struct timer_list *t)
+{
+	/*
+	 * No answer from the secure element
+	 * within the defined timeout.
+	 * Let's send a reset request as recovery procedure.
+	 * According to the situation, we first try to send a software reset
+	 * to the secure element. If the next command is still not
+	 * answering in time, we send to the CLF a secure element hardware
+	 * reset request.
+	 */
+	/* hardware reset managed through VCC_UICC_OUT power supply */
+	u8 param = 0x01;
+	struct st_nci_info *info = from_timer(info, t, se_info.bwi_timer);
+
+	pr_debug("\n");
+
+	info->se_info.bwi_active = false;
+
+	if (!info->se_info.xch_error) {
+		info->se_info.xch_error = true;
+		nci_hci_send_event(info->ndlc->ndev, ST_NCI_APDU_READER_GATE,
+				ST_NCI_EVT_SE_SOFT_RESET, NULL, 0);
+	} else {
+		info->se_info.xch_error = false;
+		nci_hci_send_event(info->ndlc->ndev, ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_EVT_SE_HARD_RESET, &param, 1);
+	}
+	info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME);
+}
+
+static void st_nci_se_activation_timeout(struct timer_list *t)
+{
+	struct st_nci_info *info = from_timer(info, t,
+					      se_info.se_active_timer);
+
+	pr_debug("\n");
+
+	info->se_info.se_active = false;
+
+	complete(&info->se_info.req_completion);
+}
+
+int st_nci_se_init(struct nci_dev *ndev, struct st_nci_se_status *se_status)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	init_completion(&info->se_info.req_completion);
+	/* initialize timers */
+	timer_setup(&info->se_info.bwi_timer, st_nci_se_wt_timeout, 0);
+	info->se_info.bwi_active = false;
+
+	timer_setup(&info->se_info.se_active_timer,
+		    st_nci_se_activation_timeout, 0);
+	info->se_info.se_active = false;
+
+	info->se_info.xch_error = false;
+
+	info->se_info.wt_timeout =
+		ST_NCI_BWI_TO_TIMEOUT(ST_NCI_ATR_DEFAULT_BWI);
+
+	info->se_info.se_status = se_status;
+
+	return 0;
+}
+EXPORT_SYMBOL(st_nci_se_init);
+
+void st_nci_se_deinit(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	if (info->se_info.bwi_active)
+		del_timer_sync(&info->se_info.bwi_timer);
+	if (info->se_info.se_active)
+		del_timer_sync(&info->se_info.se_active_timer);
+
+	info->se_info.se_active = false;
+	info->se_info.bwi_active = false;
+}
+EXPORT_SYMBOL(st_nci_se_deinit);
+
diff --git a/drivers/nfc/st-nci/spi.c b/drivers/nfc/st-nci/spi.c
new file mode 100644
index 000000000..14705591b
--- /dev/null
+++ b/drivers/nfc/st-nci/spi.c
@@ -0,0 +1,329 @@
+/*
+ * SPI Link Layer for ST NCI based Driver
+ * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/nfc.h>
+#include <linux/of.h>
+#include <net/nfc/nci.h>
+
+#include "st-nci.h"
+
+#define DRIVER_DESC "NCI NFC driver for ST_NCI"
+
+/* ndlc header */
+#define ST_NCI_FRAME_HEADROOM	1
+#define ST_NCI_FRAME_TAILROOM	0
+
+#define ST_NCI_SPI_MIN_SIZE 4   /* PCB(1) + NCI Packet header(3) */
+#define ST_NCI_SPI_MAX_SIZE 250 /* req 4.2.1 */
+
+#define ST_NCI_DRIVER_NAME "st_nci"
+#define ST_NCI_SPI_DRIVER_NAME "st_nci_spi"
+
+struct st_nci_spi_phy {
+	struct spi_device *spi_dev;
+	struct llt_ndlc *ndlc;
+
+	bool irq_active;
+
+	struct gpio_desc *gpiod_reset;
+
+	struct st_nci_se_status se_status;
+};
+
+static int st_nci_spi_enable(void *phy_id)
+{
+	struct st_nci_spi_phy *phy = phy_id;
+
+	gpiod_set_value(phy->gpiod_reset, 0);
+	usleep_range(10000, 15000);
+	gpiod_set_value(phy->gpiod_reset, 1);
+	usleep_range(80000, 85000);
+
+	if (phy->ndlc->powered == 0 && phy->irq_active == 0) {
+		enable_irq(phy->spi_dev->irq);
+		phy->irq_active = true;
+	}
+
+	return 0;
+}
+
+static void st_nci_spi_disable(void *phy_id)
+{
+	struct st_nci_spi_phy *phy = phy_id;
+
+	disable_irq_nosync(phy->spi_dev->irq);
+	phy->irq_active = false;
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int st_nci_spi_write(void *phy_id, struct sk_buff *skb)
+{
+	int r;
+	struct st_nci_spi_phy *phy = phy_id;
+	struct spi_device *dev = phy->spi_dev;
+	struct sk_buff *skb_rx;
+	u8 buf[ST_NCI_SPI_MAX_SIZE + NCI_DATA_HDR_SIZE +
+	       ST_NCI_FRAME_HEADROOM + ST_NCI_FRAME_TAILROOM];
+	struct spi_transfer spi_xfer = {
+		.tx_buf = skb->data,
+		.rx_buf = buf,
+		.len = skb->len,
+	};
+
+	if (phy->ndlc->hard_fault != 0)
+		return phy->ndlc->hard_fault;
+
+	r = spi_sync_transfer(dev, &spi_xfer, 1);
+	/*
+	 * We may have received some valuable data on miso line.
+	 * Send them back in the ndlc state machine.
+	 */
+	if (!r) {
+		skb_rx = alloc_skb(skb->len, GFP_KERNEL);
+		if (!skb_rx) {
+			r = -ENOMEM;
+			goto exit;
+		}
+
+		skb_put(skb_rx, skb->len);
+		memcpy(skb_rx->data, buf, skb->len);
+		ndlc_recv(phy->ndlc, skb_rx);
+	}
+
+exit:
+	return r;
+}
+
+/*
+ * Reads an ndlc frame and returns it in a newly allocated sk_buff.
+ * returns:
+ * 0 : if received frame is complete
+ * -EREMOTEIO : i2c read error (fatal)
+ * -EBADMSG : frame was incorrect and discarded
+ * -ENOMEM : cannot allocate skb, frame dropped
+ */
+static int st_nci_spi_read(struct st_nci_spi_phy *phy,
+			struct sk_buff **skb)
+{
+	int r;
+	u8 len;
+	u8 buf[ST_NCI_SPI_MAX_SIZE];
+	struct spi_device *dev = phy->spi_dev;
+	struct spi_transfer spi_xfer = {
+		.rx_buf = buf,
+		.len = ST_NCI_SPI_MIN_SIZE,
+	};
+
+	r = spi_sync_transfer(dev, &spi_xfer, 1);
+	if (r < 0)
+		return -EREMOTEIO;
+
+	len = be16_to_cpu(*(__be16 *) (buf + 2));
+	if (len > ST_NCI_SPI_MAX_SIZE) {
+		nfc_err(&dev->dev, "invalid frame len\n");
+		phy->ndlc->hard_fault = 1;
+		return -EBADMSG;
+	}
+
+	*skb = alloc_skb(ST_NCI_SPI_MIN_SIZE + len, GFP_KERNEL);
+	if (*skb == NULL)
+		return -ENOMEM;
+
+	skb_reserve(*skb, ST_NCI_SPI_MIN_SIZE);
+	skb_put(*skb, ST_NCI_SPI_MIN_SIZE);
+	memcpy((*skb)->data, buf, ST_NCI_SPI_MIN_SIZE);
+
+	if (!len)
+		return 0;
+
+	spi_xfer.len = len;
+	r = spi_sync_transfer(dev, &spi_xfer, 1);
+	if (r < 0) {
+		kfree_skb(*skb);
+		return -EREMOTEIO;
+	}
+
+	skb_put(*skb, len);
+	memcpy((*skb)->data + ST_NCI_SPI_MIN_SIZE, buf, len);
+
+	return 0;
+}
+
+/*
+ * Reads an ndlc frame from the chip.
+ *
+ * On ST21NFCB, IRQ goes in idle state when read starts.
+ */
+static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id)
+{
+	struct st_nci_spi_phy *phy = phy_id;
+	struct spi_device *dev;
+	struct sk_buff *skb = NULL;
+	int r;
+
+	if (!phy || !phy->ndlc || irq != phy->spi_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	dev = phy->spi_dev;
+	dev_dbg(&dev->dev, "IRQ\n");
+
+	if (phy->ndlc->hard_fault)
+		return IRQ_HANDLED;
+
+	if (!phy->ndlc->powered) {
+		st_nci_spi_disable(phy);
+		return IRQ_HANDLED;
+	}
+
+	r = st_nci_spi_read(phy, &skb);
+	if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
+		return IRQ_HANDLED;
+
+	ndlc_recv(phy->ndlc, skb);
+
+	return IRQ_HANDLED;
+}
+
+static struct nfc_phy_ops spi_phy_ops = {
+	.write = st_nci_spi_write,
+	.enable = st_nci_spi_enable,
+	.disable = st_nci_spi_disable,
+};
+
+static const struct acpi_gpio_params reset_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_st_nci_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1 },
+	{},
+};
+
+static int st_nci_spi_probe(struct spi_device *dev)
+{
+	struct st_nci_spi_phy *phy;
+	int r;
+
+	dev_dbg(&dev->dev, "%s\n", __func__);
+	dev_dbg(&dev->dev, "IRQ: %d\n", dev->irq);
+
+	/* Check SPI platform functionnalities */
+	if (!dev) {
+		pr_debug("%s: dev is NULL. Device is not accessible.\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(&dev->dev, sizeof(struct st_nci_spi_phy),
+			   GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->spi_dev = dev;
+
+	spi_set_drvdata(dev, phy);
+
+	r = devm_acpi_dev_add_driver_gpios(&dev->dev, acpi_st_nci_gpios);
+	if (r)
+		dev_dbg(&dev->dev, "Unable to add GPIO mapping table\n");
+
+	/* Get RESET GPIO */
+	phy->gpiod_reset = devm_gpiod_get(&dev->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(phy->gpiod_reset)) {
+		nfc_err(&dev->dev, "Unable to get RESET GPIO\n");
+		return PTR_ERR(phy->gpiod_reset);
+	}
+
+	phy->se_status.is_ese_present =
+			device_property_read_bool(&dev->dev, "ese-present");
+	phy->se_status.is_uicc_present =
+			device_property_read_bool(&dev->dev, "uicc-present");
+
+	r = ndlc_probe(phy, &spi_phy_ops, &dev->dev,
+			ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM,
+			&phy->ndlc, &phy->se_status);
+	if (r < 0) {
+		nfc_err(&dev->dev, "Unable to register ndlc layer\n");
+		return r;
+	}
+
+	phy->irq_active = true;
+	r = devm_request_threaded_irq(&dev->dev, dev->irq, NULL,
+				st_nci_irq_thread_fn,
+				IRQF_ONESHOT,
+				ST_NCI_SPI_DRIVER_NAME, phy);
+	if (r < 0)
+		nfc_err(&dev->dev, "Unable to register IRQ handler\n");
+
+	return r;
+}
+
+static int st_nci_spi_remove(struct spi_device *dev)
+{
+	struct st_nci_spi_phy *phy = spi_get_drvdata(dev);
+
+	dev_dbg(&dev->dev, "%s\n", __func__);
+
+	ndlc_remove(phy->ndlc);
+
+	return 0;
+}
+
+static struct spi_device_id st_nci_spi_id_table[] = {
+	{ST_NCI_SPI_DRIVER_NAME, 0},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table);
+
+static const struct acpi_device_id st_nci_spi_acpi_match[] = {
+	{"SMO2101", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, st_nci_spi_acpi_match);
+
+static const struct of_device_id of_st_nci_spi_match[] = {
+	{ .compatible = "st,st21nfcb-spi", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_st_nci_spi_match);
+
+static struct spi_driver st_nci_spi_driver = {
+	.driver = {
+		.name = ST_NCI_SPI_DRIVER_NAME,
+		.of_match_table = of_match_ptr(of_st_nci_spi_match),
+		.acpi_match_table = ACPI_PTR(st_nci_spi_acpi_match),
+	},
+	.probe = st_nci_spi_probe,
+	.id_table = st_nci_spi_id_table,
+	.remove = st_nci_spi_remove,
+};
+module_spi_driver(st_nci_spi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/st-nci/st-nci.h b/drivers/nfc/st-nci/st-nci.h
new file mode 100644
index 000000000..afaf138b7
--- /dev/null
+++ b/drivers/nfc/st-nci/st-nci.h
@@ -0,0 +1,153 @@
+/*
+ * NCI based Driver for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014  STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_ST_NCI_H_
+#define __LOCAL_ST_NCI_H_
+
+#include "ndlc.h"
+
+/* Define private flags: */
+#define ST_NCI_RUNNING			1
+
+#define ST_NCI_CORE_PROP                0x01
+#define ST_NCI_SET_NFC_MODE             0x02
+
+/*
+ * ref ISO7816-3 chap 8.1. the initial character TS is followed by a
+ * sequence of at most 32 characters.
+ */
+#define ST_NCI_ESE_MAX_LENGTH  33
+
+#define ST_NCI_DEVICE_MGNT_GATE		0x01
+
+#define ST_NCI_VENDOR_OUI 0x0080E1 /* STMicroelectronics */
+#define ST_NCI_FACTORY_MODE 2
+
+struct nci_mode_set_cmd {
+	u8 cmd_type;
+	u8 mode;
+} __packed;
+
+struct nci_mode_set_rsp {
+	u8 status;
+} __packed;
+
+struct st_nci_se_status {
+	bool is_ese_present;
+	bool is_uicc_present;
+};
+
+struct st_nci_se_info {
+	struct st_nci_se_status *se_status;
+	u8 atr[ST_NCI_ESE_MAX_LENGTH];
+	struct completion req_completion;
+
+	struct timer_list bwi_timer;
+	int wt_timeout; /* in msecs */
+	bool bwi_active;
+
+	struct timer_list se_active_timer;
+	bool se_active;
+
+	bool xch_error;
+
+	se_io_cb_t cb;
+	void *cb_context;
+};
+
+/**
+ * enum nfc_vendor_cmds - supported nfc vendor commands
+ *
+ * @FACTORY_MODE: Allow to set the driver into a mode where no secure element
+ *	are activated. It does not consider any NFC_ATTR_VENDOR_DATA.
+ * @HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command.
+ *	It does not consider any NFC_ATTR_VENDOR_DATA.
+ * @HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example
+ *	RF trimmings or low level drivers configurations (I2C, SPI, SWP).
+ * @HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing
+ *	table following RF technology, CLF mode or protocol.
+ * @HCI_DM_GET_INFO: Allow to retrieve CLF information.
+ * @HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low
+ *	level drivers configurations or RF trimmings.
+ * @HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF. A complete
+ *	packet can be more than 8KB.
+ * @HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF
+ *	configuration changes without CLF power off.
+ * @HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the
+ *	white list).
+ * @HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF
+ *	technology. When using this command to anti-collision is done.
+ * @LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity.
+ * @HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied on the
+ *	CLF antenna. A value between 0 and 0x0f is returned. 0 is maximum.
+ * @HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode. It is a
+ *	specific CLF command as there is no GPIO for this.
+ * @HCI_DM_FWUPD_END:  Allow to complete firmware update.
+ * @HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied on the
+ *	CLF antenna to a reference value.
+ * @MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data
+ *	received during a NCI_CORE_INIT_CMD.
+ */
+enum nfc_vendor_cmds {
+	FACTORY_MODE,
+	HCI_CLEAR_ALL_PIPES,
+	HCI_DM_PUT_DATA,
+	HCI_DM_UPDATE_AID,
+	HCI_DM_GET_INFO,
+	HCI_DM_GET_DATA,
+	HCI_DM_DIRECT_LOAD,
+	HCI_DM_RESET,
+	HCI_GET_PARAM,
+	HCI_DM_FIELD_GENERATOR,
+	LOOPBACK,
+	HCI_DM_FWUPD_START,
+	HCI_DM_FWUPD_END,
+	HCI_DM_VDC_MEASUREMENT_VALUE,
+	HCI_DM_VDC_VALUE_COMPARISON,
+	MANUFACTURER_SPECIFIC,
+};
+
+struct st_nci_info {
+	struct llt_ndlc *ndlc;
+	unsigned long flags;
+
+	struct st_nci_se_info se_info;
+};
+
+void st_nci_remove(struct nci_dev *ndev);
+int st_nci_probe(struct llt_ndlc *ndlc, int phy_headroom,
+		 int phy_tailroom, struct st_nci_se_status *se_status);
+
+int st_nci_se_init(struct nci_dev *ndev, struct st_nci_se_status *se_status);
+void st_nci_se_deinit(struct nci_dev *ndev);
+
+int st_nci_discover_se(struct nci_dev *ndev);
+int st_nci_enable_se(struct nci_dev *ndev, u32 se_idx);
+int st_nci_disable_se(struct nci_dev *ndev, u32 se_idx);
+int st_nci_se_io(struct nci_dev *ndev, u32 se_idx,
+				u8 *apdu, size_t apdu_length,
+				se_io_cb_t cb, void *cb_context);
+int st_nci_hci_load_session(struct nci_dev *ndev);
+void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe,
+					u8 event, struct sk_buff *skb);
+void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,
+						struct sk_buff *skb);
+
+int st_nci_vendor_cmds_init(struct nci_dev *ndev);
+
+#endif /* __LOCAL_ST_NCI_H_ */
diff --git a/drivers/nfc/st-nci/vendor_cmds.c b/drivers/nfc/st-nci/vendor_cmds.c
new file mode 100644
index 000000000..1a836c77c
--- /dev/null
+++ b/drivers/nfc/st-nci/vendor_cmds.c
@@ -0,0 +1,478 @@
+/*
+ * Proprietary commands extension for STMicroelectronics NFC NCI Chip
+ *
+ * Copyright (C) 2014-2015  STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <net/genetlink.h>
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <linux/delay.h>
+#include <net/nfc/nci_core.h>
+
+#include "st-nci.h"
+
+#define ST_NCI_HCI_DM_GETDATA			0x10
+#define ST_NCI_HCI_DM_PUTDATA			0x11
+#define ST_NCI_HCI_DM_LOAD			0x12
+#define ST_NCI_HCI_DM_GETINFO			0x13
+#define ST_NCI_HCI_DM_FWUPD_START		0x14
+#define ST_NCI_HCI_DM_FWUPD_STOP		0x15
+#define ST_NCI_HCI_DM_UPDATE_AID		0x20
+#define ST_NCI_HCI_DM_RESET			0x3e
+
+#define ST_NCI_HCI_DM_FIELD_GENERATOR		0x32
+#define ST_NCI_HCI_DM_VDC_MEASUREMENT_VALUE	0x33
+#define ST_NCI_HCI_DM_VDC_VALUE_COMPARISON	0x34
+
+#define ST_NCI_FACTORY_MODE_ON			1
+#define ST_NCI_FACTORY_MODE_OFF			0
+
+#define ST_NCI_EVT_POST_DATA			0x02
+
+struct get_param_data {
+	u8 gate;
+	u8 data;
+} __packed;
+
+static int st_nci_factory_mode(struct nfc_dev *dev, void *data,
+			       size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	if (data_len != 1)
+		return -EINVAL;
+
+	pr_debug("factory mode: %x\n", ((u8 *)data)[0]);
+
+	switch (((u8 *)data)[0]) {
+	case ST_NCI_FACTORY_MODE_ON:
+		test_and_set_bit(ST_NCI_FACTORY_MODE, &info->flags);
+	break;
+	case ST_NCI_FACTORY_MODE_OFF:
+		clear_bit(ST_NCI_FACTORY_MODE, &info->flags);
+	break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int st_nci_hci_clear_all_pipes(struct nfc_dev *dev, void *data,
+				      size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	return nci_hci_clear_all_pipes(ndev);
+}
+
+static int st_nci_hci_dm_put_data(struct nfc_dev *dev, void *data,
+				  size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_HCI_DM_PUTDATA, data,
+				data_len, NULL);
+}
+
+static int st_nci_hci_dm_update_aid(struct nfc_dev *dev, void *data,
+				    size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			ST_NCI_HCI_DM_UPDATE_AID, data, data_len, NULL);
+}
+
+static int st_nci_hci_dm_get_info(struct nfc_dev *dev, void *data,
+				  size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, ST_NCI_HCI_DM_GETINFO,
+			     data, data_len, &skb);
+	if (r)
+		goto exit;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					     HCI_DM_GET_INFO, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+exit:
+	return r;
+}
+
+static int st_nci_hci_dm_get_data(struct nfc_dev *dev, void *data,
+				  size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, ST_NCI_HCI_DM_GETDATA,
+			     data, data_len, &skb);
+	if (r)
+		goto exit;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					     HCI_DM_GET_DATA, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+exit:
+	return r;
+}
+
+static int st_nci_hci_dm_fwupd_start(struct nfc_dev *dev, void *data,
+				     size_t data_len)
+{
+	int r;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	dev->fw_download_in_progress = true;
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			ST_NCI_HCI_DM_FWUPD_START, data, data_len, NULL);
+	if (r)
+		dev->fw_download_in_progress = false;
+
+	return r;
+}
+
+static int st_nci_hci_dm_fwupd_end(struct nfc_dev *dev, void *data,
+				   size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			ST_NCI_HCI_DM_FWUPD_STOP, data, data_len, NULL);
+}
+
+static int st_nci_hci_dm_direct_load(struct nfc_dev *dev, void *data,
+				     size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	if (dev->fw_download_in_progress) {
+		dev->fw_download_in_progress = false;
+		return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_HCI_DM_LOAD, data, data_len, NULL);
+	}
+	return -EPROTO;
+}
+
+static int st_nci_hci_dm_reset(struct nfc_dev *dev, void *data,
+			       size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			ST_NCI_HCI_DM_RESET, data, data_len, NULL);
+	msleep(200);
+
+	return 0;
+}
+
+static int st_nci_hci_get_param(struct nfc_dev *dev, void *data,
+				size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+	struct get_param_data *param = (struct get_param_data *)data;
+
+	if (data_len < sizeof(struct get_param_data))
+		return -EPROTO;
+
+	r = nci_hci_get_param(ndev, param->gate, param->data, &skb);
+	if (r)
+		goto exit;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					     HCI_GET_PARAM, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+exit:
+	return r;
+}
+
+static int st_nci_hci_dm_field_generator(struct nfc_dev *dev, void *data,
+					 size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_HCI_DM_FIELD_GENERATOR, data, data_len, NULL);
+}
+
+static int st_nci_hci_dm_vdc_measurement_value(struct nfc_dev *dev, void *data,
+					       size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	if (data_len != 4)
+		return -EPROTO;
+
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			     ST_NCI_HCI_DM_VDC_MEASUREMENT_VALUE,
+			     data, data_len, &skb);
+	if (r)
+		goto exit;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+				HCI_DM_VDC_MEASUREMENT_VALUE, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+exit:
+	return r;
+}
+
+static int st_nci_hci_dm_vdc_value_comparison(struct nfc_dev *dev, void *data,
+					      size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	if (data_len != 2)
+		return -EPROTO;
+
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			     ST_NCI_HCI_DM_VDC_VALUE_COMPARISON,
+			     data, data_len, &skb);
+	if (r)
+		goto exit;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					HCI_DM_VDC_VALUE_COMPARISON, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+exit:
+	return r;
+}
+
+static int st_nci_loopback(struct nfc_dev *dev, void *data,
+			   size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	if (data_len <= 0)
+		return -EPROTO;
+
+	r = nci_nfcc_loopback(ndev, data, data_len, &skb);
+	if (r < 0)
+		return r;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					     LOOPBACK, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+free_skb:
+	kfree_skb(skb);
+	return r;
+}
+
+static int st_nci_manufacturer_specific(struct nfc_dev *dev, void *data,
+					size_t data_len)
+{
+	struct sk_buff *msg;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					MANUFACTURER_SPECIFIC,
+					sizeof(ndev->manufact_specific_info));
+	if (!msg)
+		return -ENOMEM;
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, sizeof(ndev->manufact_specific_info),
+		    &ndev->manufact_specific_info)) {
+		kfree_skb(msg);
+		return -ENOBUFS;
+	}
+
+	return nfc_vendor_cmd_reply(msg);
+}
+
+static struct nfc_vendor_cmd st_nci_vendor_cmds[] = {
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = FACTORY_MODE,
+		.doit = st_nci_factory_mode,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_CLEAR_ALL_PIPES,
+		.doit = st_nci_hci_clear_all_pipes,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_PUT_DATA,
+		.doit = st_nci_hci_dm_put_data,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_UPDATE_AID,
+		.doit = st_nci_hci_dm_update_aid,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_GET_INFO,
+		.doit = st_nci_hci_dm_get_info,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_GET_DATA,
+		.doit = st_nci_hci_dm_get_data,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_DIRECT_LOAD,
+		.doit = st_nci_hci_dm_direct_load,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_RESET,
+		.doit = st_nci_hci_dm_reset,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_GET_PARAM,
+		.doit = st_nci_hci_get_param,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_FIELD_GENERATOR,
+		.doit = st_nci_hci_dm_field_generator,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_FWUPD_START,
+		.doit = st_nci_hci_dm_fwupd_start,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_FWUPD_END,
+		.doit = st_nci_hci_dm_fwupd_end,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = LOOPBACK,
+		.doit = st_nci_loopback,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_VDC_MEASUREMENT_VALUE,
+		.doit = st_nci_hci_dm_vdc_measurement_value,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_VDC_VALUE_COMPARISON,
+		.doit = st_nci_hci_dm_vdc_value_comparison,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = MANUFACTURER_SPECIFIC,
+		.doit = st_nci_manufacturer_specific,
+	},
+};
+
+int st_nci_vendor_cmds_init(struct nci_dev *ndev)
+{
+	return nfc_set_vendor_cmds(ndev->nfc_dev, st_nci_vendor_cmds,
+				   sizeof(st_nci_vendor_cmds));
+}
+EXPORT_SYMBOL(st_nci_vendor_cmds_init);
diff --git a/drivers/nfc/st21nfca/Kconfig b/drivers/nfc/st21nfca/Kconfig
new file mode 100644
index 000000000..cc3bd5658
--- /dev/null
+++ b/drivers/nfc/st21nfca/Kconfig
@@ -0,0 +1,18 @@
+config NFC_ST21NFCA
+	tristate
+	select CRC_CCITT
+	---help---
+	  STMicroelectronics ST21NFCA core driver. It implements the chipset
+	  HCI logic and hooks into the NFC kernel APIs. Physical layers will
+	  register against it.
+
+config NFC_ST21NFCA_I2C
+	tristate "STMicroelectronics ST21NFCA NFC driver (I2C)"
+	depends on NFC_HCI && I2C && NFC_SHDLC
+	select NFC_ST21NFCA
+	---help---
+	  This module adds support for the STMicroelectronics st21nfca i2c interface.
+	  Select this if your platform is using the i2c bus.
+
+	  If you choose to build a module, it'll be called st21nfca_i2c.
+	  Say N if unsure.
diff --git a/drivers/nfc/st21nfca/Makefile b/drivers/nfc/st21nfca/Makefile
new file mode 100644
index 000000000..ded6489c3
--- /dev/null
+++ b/drivers/nfc/st21nfca/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for ST21NFCA HCI based NFC driver
+#
+
+st21nfca_hci-objs = core.o dep.o se.o vendor_cmds.o
+obj-$(CONFIG_NFC_ST21NFCA)     += st21nfca_hci.o
+
+st21nfca_i2c-objs  = i2c.o
+obj-$(CONFIG_NFC_ST21NFCA_I2C) += st21nfca_i2c.o
diff --git a/drivers/nfc/st21nfca/core.c b/drivers/nfc/st21nfca/core.c
new file mode 100644
index 000000000..f37069b53
--- /dev/null
+++ b/drivers/nfc/st21nfca/core.c
@@ -0,0 +1,1050 @@
+/*
+ * HCI based Driver for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014  STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "st21nfca.h"
+
+#define DRIVER_DESC "HCI NFC driver for ST21NFCA"
+
+#define FULL_VERSION_LEN 3
+
+/* Proprietary gates, events, commands and registers */
+
+/* Commands that apply to all RF readers */
+#define ST21NFCA_RF_READER_CMD_PRESENCE_CHECK	0x30
+
+#define ST21NFCA_RF_READER_ISO15693_GATE	0x12
+#define ST21NFCA_RF_READER_ISO15693_INVENTORY	0x01
+
+/*
+ * Reader gate for communication with contact-less cards using Type A
+ * protocol ISO14443-3 but not compliant with ISO14443-4
+ */
+#define ST21NFCA_RF_READER_14443_3_A_GATE	0x15
+#define ST21NFCA_RF_READER_14443_3_A_UID	0x02
+#define ST21NFCA_RF_READER_14443_3_A_ATQA	0x03
+#define ST21NFCA_RF_READER_14443_3_A_SAK	0x04
+
+#define ST21NFCA_RF_READER_F_DATARATE		0x01
+#define ST21NFCA_RF_READER_F_DATARATE_106	0x01
+#define ST21NFCA_RF_READER_F_DATARATE_212	0x02
+#define ST21NFCA_RF_READER_F_DATARATE_424	0x04
+#define ST21NFCA_RF_READER_F_POL_REQ		0x02
+#define ST21NFCA_RF_READER_F_POL_REQ_DEFAULT	0xffff0000
+#define ST21NFCA_RF_READER_F_NFCID2		0x03
+#define ST21NFCA_RF_READER_F_NFCID1		0x04
+
+#define ST21NFCA_RF_CARD_F_MODE			0x01
+#define ST21NFCA_RF_CARD_F_NFCID2_LIST		0x04
+#define ST21NFCA_RF_CARD_F_NFCID1		0x05
+#define ST21NFCA_RF_CARD_F_SENS_RES		0x06
+#define ST21NFCA_RF_CARD_F_SEL_RES		0x07
+#define ST21NFCA_RF_CARD_F_DATARATE		0x08
+#define ST21NFCA_RF_CARD_F_DATARATE_212_424	0x01
+
+#define ST21NFCA_DEVICE_MGNT_PIPE		0x02
+
+#define ST21NFCA_DM_GETINFO			0x13
+#define ST21NFCA_DM_GETINFO_PIPE_LIST		0x02
+#define ST21NFCA_DM_GETINFO_PIPE_INFO		0x01
+#define ST21NFCA_DM_PIPE_CREATED		0x02
+#define ST21NFCA_DM_PIPE_OPEN			0x04
+#define ST21NFCA_DM_RF_ACTIVE			0x80
+#define ST21NFCA_DM_DISCONNECT			0x30
+
+#define ST21NFCA_DM_IS_PIPE_OPEN(p) \
+	((p & 0x0f) == (ST21NFCA_DM_PIPE_CREATED | ST21NFCA_DM_PIPE_OPEN))
+
+#define ST21NFCA_NFC_MODE			0x03	/* NFC_MODE parameter*/
+
+#define ST21NFCA_EVT_HOT_PLUG			0x03
+#define ST21NFCA_EVT_HOT_PLUG_IS_INHIBITED(x) (x->data[0] & 0x80)
+
+#define ST21NFCA_SE_TO_PIPES			2000
+
+static DECLARE_BITMAP(dev_mask, ST21NFCA_NUM_DEVICES);
+
+static struct nfc_hci_gate st21nfca_gates[] = {
+	{NFC_HCI_ADMIN_GATE, NFC_HCI_ADMIN_PIPE},
+	{NFC_HCI_LINK_MGMT_GATE, NFC_HCI_LINK_MGMT_PIPE},
+	{ST21NFCA_DEVICE_MGNT_GATE, ST21NFCA_DEVICE_MGNT_PIPE},
+
+	{NFC_HCI_LOOPBACK_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_ID_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_RF_READER_B_GATE, NFC_HCI_INVALID_PIPE},
+	{NFC_HCI_RF_READER_A_GATE, NFC_HCI_INVALID_PIPE},
+	{ST21NFCA_RF_READER_F_GATE, NFC_HCI_INVALID_PIPE},
+	{ST21NFCA_RF_READER_14443_3_A_GATE, NFC_HCI_INVALID_PIPE},
+	{ST21NFCA_RF_READER_ISO15693_GATE, NFC_HCI_INVALID_PIPE},
+	{ST21NFCA_RF_CARD_F_GATE, NFC_HCI_INVALID_PIPE},
+
+	/* Secure element pipes are created by secure element host */
+	{ST21NFCA_CONNECTIVITY_GATE, NFC_HCI_DO_NOT_CREATE_PIPE},
+	{ST21NFCA_APDU_READER_GATE, NFC_HCI_DO_NOT_CREATE_PIPE},
+};
+
+struct st21nfca_pipe_info {
+	u8 pipe_state;
+	u8 src_host_id;
+	u8 src_gate_id;
+	u8 dst_host_id;
+	u8 dst_gate_id;
+} __packed;
+
+/* Largest headroom needed for outgoing custom commands */
+#define ST21NFCA_CMDS_HEADROOM  7
+
+static int st21nfca_hci_load_session(struct nfc_hci_dev *hdev)
+{
+	int i, j, r;
+	struct sk_buff *skb_pipe_list, *skb_pipe_info;
+	struct st21nfca_pipe_info *info;
+
+	u8 pipe_list[] = { ST21NFCA_DM_GETINFO_PIPE_LIST,
+		NFC_HCI_TERMINAL_HOST_ID
+	};
+	u8 pipe_info[] = { ST21NFCA_DM_GETINFO_PIPE_INFO,
+		NFC_HCI_TERMINAL_HOST_ID, 0
+	};
+
+	/* On ST21NFCA device pipes number are dynamics
+	 * A maximum of 16 pipes can be created at the same time
+	 * If pipes are already created, hci_dev_up will fail.
+	 * Doing a clear all pipe is a bad idea because:
+	 * - It does useless EEPROM cycling
+	 * - It might cause issue for secure elements support
+	 * (such as removing connectivity or APDU reader pipe)
+	 * A better approach on ST21NFCA is to:
+	 * - get a pipe list for each host.
+	 * (eg: NFC_HCI_HOST_CONTROLLER_ID for now).
+	 * (TODO Later on UICC HOST and eSE HOST)
+	 * - get pipe information
+	 * - match retrieved pipe list in st21nfca_gates
+	 * ST21NFCA_DEVICE_MGNT_GATE is a proprietary gate
+	 * with ST21NFCA_DEVICE_MGNT_PIPE.
+	 * Pipe can be closed and need to be open.
+	 */
+	r = nfc_hci_connect_gate(hdev, NFC_HCI_HOST_CONTROLLER_ID,
+				ST21NFCA_DEVICE_MGNT_GATE,
+				ST21NFCA_DEVICE_MGNT_PIPE);
+	if (r < 0)
+		return r;
+
+	/* Get pipe list */
+	r = nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+			ST21NFCA_DM_GETINFO, pipe_list, sizeof(pipe_list),
+			&skb_pipe_list);
+	if (r < 0)
+		return r;
+
+	/* Complete the existing gate_pipe table */
+	for (i = 0; i < skb_pipe_list->len; i++) {
+		pipe_info[2] = skb_pipe_list->data[i];
+		r = nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+					ST21NFCA_DM_GETINFO, pipe_info,
+					sizeof(pipe_info), &skb_pipe_info);
+		if (r)
+			continue;
+
+		/*
+		 * Match pipe ID and gate ID
+		 * Output format from ST21NFC_DM_GETINFO is:
+		 * - pipe state (1byte)
+		 * - source hid (1byte)
+		 * - source gid (1byte)
+		 * - destination hid (1byte)
+		 * - destination gid (1byte)
+		 */
+		info = (struct st21nfca_pipe_info *) skb_pipe_info->data;
+		if (info->dst_gate_id == ST21NFCA_APDU_READER_GATE &&
+			info->src_host_id == NFC_HCI_UICC_HOST_ID) {
+			pr_err("Unexpected apdu_reader pipe on host %x\n",
+				info->src_host_id);
+			kfree_skb(skb_pipe_info);
+			continue;
+		}
+
+		for (j = 3; (j < ARRAY_SIZE(st21nfca_gates)) &&
+			(st21nfca_gates[j].gate != info->dst_gate_id) ; j++)
+			;
+
+		if (j < ARRAY_SIZE(st21nfca_gates) &&
+			st21nfca_gates[j].gate == info->dst_gate_id &&
+			ST21NFCA_DM_IS_PIPE_OPEN(info->pipe_state)) {
+			hdev->init_data.gates[j].pipe = pipe_info[2];
+
+			hdev->gate2pipe[st21nfca_gates[j].gate] =
+						pipe_info[2];
+			hdev->pipes[pipe_info[2]].gate =
+						st21nfca_gates[j].gate;
+			hdev->pipes[pipe_info[2]].dest_host =
+						info->src_host_id;
+		}
+		kfree_skb(skb_pipe_info);
+	}
+
+	/*
+	 * 3 gates have a well known pipe ID. Only NFC_HCI_LINK_MGMT_GATE
+	 * is not yet open at this stage.
+	 */
+	r = nfc_hci_connect_gate(hdev, NFC_HCI_HOST_CONTROLLER_ID,
+				 NFC_HCI_LINK_MGMT_GATE,
+				 NFC_HCI_LINK_MGMT_PIPE);
+
+	kfree_skb(skb_pipe_list);
+	return r;
+}
+
+static int st21nfca_hci_open(struct nfc_hci_dev *hdev)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+	int r;
+
+	mutex_lock(&info->info_lock);
+
+	if (info->state != ST21NFCA_ST_COLD) {
+		r = -EBUSY;
+		goto out;
+	}
+
+	r = info->phy_ops->enable(info->phy_id);
+
+	if (r == 0)
+		info->state = ST21NFCA_ST_READY;
+
+out:
+	mutex_unlock(&info->info_lock);
+	return r;
+}
+
+static void st21nfca_hci_close(struct nfc_hci_dev *hdev)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	mutex_lock(&info->info_lock);
+
+	if (info->state == ST21NFCA_ST_COLD)
+		goto out;
+
+	info->phy_ops->disable(info->phy_id);
+	info->state = ST21NFCA_ST_COLD;
+
+out:
+	mutex_unlock(&info->info_lock);
+}
+
+static int st21nfca_hci_ready(struct nfc_hci_dev *hdev)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+	struct sk_buff *skb;
+
+	u8 param;
+	u8 white_list[2];
+	int wl_size = 0;
+	int r;
+
+	if (info->se_status->is_uicc_present)
+		white_list[wl_size++] = NFC_HCI_UICC_HOST_ID;
+	if (info->se_status->is_ese_present)
+		white_list[wl_size++] = ST21NFCA_ESE_HOST_ID;
+
+	if (wl_size) {
+		r = nfc_hci_set_param(hdev, NFC_HCI_ADMIN_GATE,
+					NFC_HCI_ADMIN_WHITELIST,
+					(u8 *) &white_list, wl_size);
+		if (r < 0)
+			return r;
+	}
+
+	/* Set NFC_MODE in device management gate to enable */
+	r = nfc_hci_get_param(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+			      ST21NFCA_NFC_MODE, &skb);
+	if (r < 0)
+		return r;
+
+	param = skb->data[0];
+	kfree_skb(skb);
+	if (param == 0) {
+		param = 1;
+
+		r = nfc_hci_set_param(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+					ST21NFCA_NFC_MODE, &param, 1);
+		if (r < 0)
+			return r;
+	}
+
+	r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+			       NFC_HCI_EVT_END_OPERATION, NULL, 0);
+	if (r < 0)
+		return r;
+
+	r = nfc_hci_get_param(hdev, NFC_HCI_ID_MGMT_GATE,
+			      NFC_HCI_ID_MGMT_VERSION_SW, &skb);
+	if (r < 0)
+		return r;
+
+	if (skb->len != FULL_VERSION_LEN) {
+		kfree_skb(skb);
+		return -EINVAL;
+	}
+
+	print_hex_dump(KERN_DEBUG, "FULL VERSION SOFTWARE INFO: ",
+		       DUMP_PREFIX_NONE, 16, 1,
+		       skb->data, FULL_VERSION_LEN, false);
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int st21nfca_hci_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	return info->phy_ops->write(info->phy_id, skb);
+}
+
+static int st21nfca_hci_start_poll(struct nfc_hci_dev *hdev,
+				   u32 im_protocols, u32 tm_protocols)
+{
+	int r;
+	u32 pol_req;
+	u8 param[19];
+	struct sk_buff *datarate_skb;
+
+	pr_info(DRIVER_DESC ": %s protocols 0x%x 0x%x\n",
+		__func__, im_protocols, tm_protocols);
+
+	r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+			       NFC_HCI_EVT_END_OPERATION, NULL, 0);
+	if (r < 0)
+		return r;
+	if (im_protocols) {
+		/*
+		 * enable polling according to im_protocols & tm_protocols
+		 * - CLOSE pipe according to im_protocols & tm_protocols
+		 */
+		if ((NFC_HCI_RF_READER_B_GATE & im_protocols) == 0) {
+			r = nfc_hci_disconnect_gate(hdev,
+					NFC_HCI_RF_READER_B_GATE);
+			if (r < 0)
+				return r;
+		}
+
+		if ((NFC_HCI_RF_READER_A_GATE & im_protocols) == 0) {
+			r = nfc_hci_disconnect_gate(hdev,
+					NFC_HCI_RF_READER_A_GATE);
+			if (r < 0)
+				return r;
+		}
+
+		if ((ST21NFCA_RF_READER_F_GATE & im_protocols) == 0) {
+			r = nfc_hci_disconnect_gate(hdev,
+					ST21NFCA_RF_READER_F_GATE);
+			if (r < 0)
+				return r;
+		} else {
+			hdev->gb = nfc_get_local_general_bytes(hdev->ndev,
+							       &hdev->gb_len);
+
+			if (hdev->gb == NULL || hdev->gb_len == 0) {
+				im_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+				tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+			}
+
+			param[0] = ST21NFCA_RF_READER_F_DATARATE_106 |
+			    ST21NFCA_RF_READER_F_DATARATE_212 |
+			    ST21NFCA_RF_READER_F_DATARATE_424;
+			r = nfc_hci_set_param(hdev, ST21NFCA_RF_READER_F_GATE,
+					      ST21NFCA_RF_READER_F_DATARATE,
+					      param, 1);
+			if (r < 0)
+				return r;
+
+			pol_req = be32_to_cpu((__force __be32)
+					ST21NFCA_RF_READER_F_POL_REQ_DEFAULT);
+			r = nfc_hci_set_param(hdev, ST21NFCA_RF_READER_F_GATE,
+					      ST21NFCA_RF_READER_F_POL_REQ,
+					      (u8 *) &pol_req, 4);
+			if (r < 0)
+				return r;
+		}
+
+		if ((ST21NFCA_RF_READER_14443_3_A_GATE & im_protocols) == 0) {
+			r = nfc_hci_disconnect_gate(hdev,
+					ST21NFCA_RF_READER_14443_3_A_GATE);
+			if (r < 0)
+				return r;
+		}
+
+		if ((ST21NFCA_RF_READER_ISO15693_GATE & im_protocols) == 0) {
+			r = nfc_hci_disconnect_gate(hdev,
+					ST21NFCA_RF_READER_ISO15693_GATE);
+			if (r < 0)
+				return r;
+		}
+
+		r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+				       NFC_HCI_EVT_READER_REQUESTED, NULL, 0);
+		if (r < 0)
+			nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+					   NFC_HCI_EVT_END_OPERATION, NULL, 0);
+	}
+
+	if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		r = nfc_hci_get_param(hdev, ST21NFCA_RF_CARD_F_GATE,
+				      ST21NFCA_RF_CARD_F_DATARATE,
+				      &datarate_skb);
+		if (r < 0)
+			return r;
+
+		/* Configure the maximum supported datarate to 424Kbps */
+		if (datarate_skb->len > 0 &&
+		    datarate_skb->data[0] !=
+		    ST21NFCA_RF_CARD_F_DATARATE_212_424) {
+			param[0] = ST21NFCA_RF_CARD_F_DATARATE_212_424;
+			r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE,
+					      ST21NFCA_RF_CARD_F_DATARATE,
+					      param, 1);
+			if (r < 0) {
+				kfree_skb(datarate_skb);
+				return r;
+			}
+		}
+		kfree_skb(datarate_skb);
+
+		/*
+		 * Configure sens_res
+		 *
+		 * NFC Forum Digital Spec Table 7:
+		 * NFCID1 size: triple (10 bytes)
+		 */
+		param[0] = 0x00;
+		param[1] = 0x08;
+		r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE,
+				      ST21NFCA_RF_CARD_F_SENS_RES, param, 2);
+		if (r < 0)
+			return r;
+
+		/*
+		 * Configure sel_res
+		 *
+		 * NFC Forum Digistal Spec Table 17:
+		 * b3 set to 0b (value b7-b6):
+		 * - 10b: Configured for NFC-DEP Protocol
+		 */
+		param[0] = 0x40;
+		r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE,
+				      ST21NFCA_RF_CARD_F_SEL_RES, param, 1);
+		if (r < 0)
+			return r;
+
+		/* Configure NFCID1 Random uid */
+		r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE,
+				      ST21NFCA_RF_CARD_F_NFCID1, NULL, 0);
+		if (r < 0)
+			return r;
+
+		/* Configure NFCID2_LIST */
+		/* System Code */
+		param[0] = 0x00;
+		param[1] = 0x00;
+		/* NFCID2 */
+		param[2] = 0x01;
+		param[3] = 0xfe;
+		param[4] = 'S';
+		param[5] = 'T';
+		param[6] = 'M';
+		param[7] = 'i';
+		param[8] = 'c';
+		param[9] = 'r';
+		/* 8 byte Pad bytes used for polling respone frame */
+
+		/*
+		 * Configuration byte:
+		 * - bit 0: define the default NFCID2 entry used when the
+		 * system code is equal to 'FFFF'
+		 * - bit 1: use a random value for lowest 6 bytes of
+		 * NFCID2 value
+		 * - bit 2: ignore polling request frame if request code
+		 * is equal to '01'
+		 * - Other bits are RFU
+		 */
+		param[18] = 0x01;
+		r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE,
+				      ST21NFCA_RF_CARD_F_NFCID2_LIST, param,
+				      19);
+		if (r < 0)
+			return r;
+
+		param[0] = 0x02;
+		r = nfc_hci_set_param(hdev, ST21NFCA_RF_CARD_F_GATE,
+				      ST21NFCA_RF_CARD_F_MODE, param, 1);
+	}
+
+	return r;
+}
+
+static void st21nfca_hci_stop_poll(struct nfc_hci_dev *hdev)
+{
+	nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+			ST21NFCA_DM_DISCONNECT, NULL, 0, NULL);
+}
+
+static int st21nfca_get_iso14443_3_atqa(struct nfc_hci_dev *hdev, u16 *atqa)
+{
+	int r;
+	struct sk_buff *atqa_skb = NULL;
+
+	r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_14443_3_A_GATE,
+			      ST21NFCA_RF_READER_14443_3_A_ATQA, &atqa_skb);
+	if (r < 0)
+		goto exit;
+
+	if (atqa_skb->len != 2) {
+		r = -EPROTO;
+		goto exit;
+	}
+
+	*atqa = be16_to_cpu(*(__be16 *) atqa_skb->data);
+
+exit:
+	kfree_skb(atqa_skb);
+	return r;
+}
+
+static int st21nfca_get_iso14443_3_sak(struct nfc_hci_dev *hdev, u8 *sak)
+{
+	int r;
+	struct sk_buff *sak_skb = NULL;
+
+	r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_14443_3_A_GATE,
+			      ST21NFCA_RF_READER_14443_3_A_SAK, &sak_skb);
+	if (r < 0)
+		goto exit;
+
+	if (sak_skb->len != 1) {
+		r = -EPROTO;
+		goto exit;
+	}
+
+	*sak = sak_skb->data[0];
+
+exit:
+	kfree_skb(sak_skb);
+	return r;
+}
+
+static int st21nfca_get_iso14443_3_uid(struct nfc_hci_dev *hdev, u8 *uid,
+				       int *len)
+{
+	int r;
+	struct sk_buff *uid_skb = NULL;
+
+	r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_14443_3_A_GATE,
+			      ST21NFCA_RF_READER_14443_3_A_UID, &uid_skb);
+	if (r < 0)
+		goto exit;
+
+	if (uid_skb->len == 0 || uid_skb->len > NFC_NFCID1_MAXSIZE) {
+		r = -EPROTO;
+		goto exit;
+	}
+
+	memcpy(uid, uid_skb->data, uid_skb->len);
+	*len = uid_skb->len;
+exit:
+	kfree_skb(uid_skb);
+	return r;
+}
+
+static int st21nfca_get_iso15693_inventory(struct nfc_hci_dev *hdev,
+					   struct nfc_target *target)
+{
+	int r;
+	struct sk_buff *inventory_skb = NULL;
+
+	r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_ISO15693_GATE,
+			      ST21NFCA_RF_READER_ISO15693_INVENTORY,
+			      &inventory_skb);
+	if (r < 0)
+		goto exit;
+
+	skb_pull(inventory_skb, 2);
+
+	if (inventory_skb->len == 0 ||
+	    inventory_skb->len > NFC_ISO15693_UID_MAXSIZE) {
+		r = -EPROTO;
+		goto exit;
+	}
+
+	memcpy(target->iso15693_uid, inventory_skb->data, inventory_skb->len);
+	target->iso15693_dsfid	= inventory_skb->data[1];
+	target->is_iso15693 = 1;
+exit:
+	kfree_skb(inventory_skb);
+	return r;
+}
+
+static int st21nfca_hci_dep_link_up(struct nfc_hci_dev *hdev,
+				    struct nfc_target *target, u8 comm_mode,
+				    u8 *gb, size_t gb_len)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	info->dep_info.idx = target->idx;
+	return st21nfca_im_send_atr_req(hdev, gb, gb_len);
+}
+
+static int st21nfca_hci_dep_link_down(struct nfc_hci_dev *hdev)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	info->state = ST21NFCA_ST_READY;
+
+	return nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+				ST21NFCA_DM_DISCONNECT, NULL, 0, NULL);
+}
+
+static int st21nfca_hci_target_from_gate(struct nfc_hci_dev *hdev, u8 gate,
+					 struct nfc_target *target)
+{
+	int r, len;
+	u16 atqa;
+	u8 sak;
+	u8 uid[NFC_NFCID1_MAXSIZE];
+
+	switch (gate) {
+	case ST21NFCA_RF_READER_F_GATE:
+		target->supported_protocols = NFC_PROTO_FELICA_MASK;
+		break;
+	case ST21NFCA_RF_READER_14443_3_A_GATE:
+		/* ISO14443-3 type 1 or 2 tags */
+		r = st21nfca_get_iso14443_3_atqa(hdev, &atqa);
+		if (r < 0)
+			return r;
+		if (atqa == 0x000c) {
+			target->supported_protocols = NFC_PROTO_JEWEL_MASK;
+			target->sens_res = 0x0c00;
+		} else {
+			r = st21nfca_get_iso14443_3_sak(hdev, &sak);
+			if (r < 0)
+				return r;
+
+			r = st21nfca_get_iso14443_3_uid(hdev, uid, &len);
+			if (r < 0)
+				return r;
+
+			target->supported_protocols =
+			    nfc_hci_sak_to_protocol(sak);
+			if (target->supported_protocols == 0xffffffff)
+				return -EPROTO;
+
+			target->sens_res = atqa;
+			target->sel_res = sak;
+			memcpy(target->nfcid1, uid, len);
+			target->nfcid1_len = len;
+		}
+
+		break;
+	case ST21NFCA_RF_READER_ISO15693_GATE:
+		target->supported_protocols = NFC_PROTO_ISO15693_MASK;
+		r = st21nfca_get_iso15693_inventory(hdev, target);
+		if (r < 0)
+			return r;
+		break;
+	default:
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+static int st21nfca_hci_complete_target_discovered(struct nfc_hci_dev *hdev,
+						u8 gate,
+						struct nfc_target *target)
+{
+	int r;
+	struct sk_buff *nfcid_skb = NULL;
+
+	if (gate == ST21NFCA_RF_READER_F_GATE) {
+		r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_F_GATE,
+				ST21NFCA_RF_READER_F_NFCID2, &nfcid_skb);
+		if (r < 0)
+			goto exit;
+
+		if (nfcid_skb->len > NFC_SENSF_RES_MAXSIZE) {
+			r = -EPROTO;
+			goto exit;
+		}
+
+		/*
+		 * - After the recepton of polling response for type F frame
+		 * at 212 or 424 Kbit/s, NFCID2 registry parameters will be
+		 * updated.
+		 * - After the reception of SEL_RES with NFCIP-1 compliant bit
+		 * set for type A frame NFCID1 will be updated
+		 */
+		if (nfcid_skb->len > 0) {
+			/* P2P in type F */
+			memcpy(target->sensf_res, nfcid_skb->data,
+				nfcid_skb->len);
+			target->sensf_res_len = nfcid_skb->len;
+			/* NFC Forum Digital Protocol Table 44 */
+			if (target->sensf_res[0] == 0x01 &&
+			    target->sensf_res[1] == 0xfe)
+				target->supported_protocols =
+							NFC_PROTO_NFC_DEP_MASK;
+			else
+				target->supported_protocols =
+							NFC_PROTO_FELICA_MASK;
+		} else {
+			kfree_skb(nfcid_skb);
+			nfcid_skb = NULL;
+			/* P2P in type A */
+			r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_F_GATE,
+					ST21NFCA_RF_READER_F_NFCID1,
+					&nfcid_skb);
+			if (r < 0)
+				goto exit;
+
+			if (nfcid_skb->len > NFC_NFCID1_MAXSIZE) {
+				r = -EPROTO;
+				goto exit;
+			}
+			memcpy(target->sensf_res, nfcid_skb->data,
+				nfcid_skb->len);
+			target->sensf_res_len = nfcid_skb->len;
+			target->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+		}
+		target->hci_reader_gate = ST21NFCA_RF_READER_F_GATE;
+	}
+	r = 1;
+exit:
+	kfree_skb(nfcid_skb);
+	return r;
+}
+
+#define ST21NFCA_CB_TYPE_READER_ISO15693 1
+static void st21nfca_hci_data_exchange_cb(void *context, struct sk_buff *skb,
+					  int err)
+{
+	struct st21nfca_hci_info *info = context;
+
+	switch (info->async_cb_type) {
+	case ST21NFCA_CB_TYPE_READER_ISO15693:
+		if (err == 0)
+			skb_trim(skb, skb->len - 1);
+		info->async_cb(info->async_cb_context, skb, err);
+		break;
+	default:
+		if (err == 0)
+			kfree_skb(skb);
+		break;
+	}
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the data exchange
+ *    1: driver doesn't especially handle, please do standard processing
+ */
+static int st21nfca_hci_im_transceive(struct nfc_hci_dev *hdev,
+				      struct nfc_target *target,
+				      struct sk_buff *skb,
+				      data_exchange_cb_t cb, void *cb_context)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	pr_info(DRIVER_DESC ": %s for gate=%d len=%d\n", __func__,
+		target->hci_reader_gate, skb->len);
+
+	switch (target->hci_reader_gate) {
+	case ST21NFCA_RF_READER_F_GATE:
+		if (target->supported_protocols == NFC_PROTO_NFC_DEP_MASK)
+			return st21nfca_im_send_dep_req(hdev, skb);
+
+		*(u8 *)skb_push(skb, 1) = 0x1a;
+		return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+					      ST21NFCA_WR_XCHG_DATA, skb->data,
+					      skb->len, cb, cb_context);
+	case ST21NFCA_RF_READER_14443_3_A_GATE:
+		*(u8 *)skb_push(skb, 1) = 0x1a;	/* CTR, see spec:10.2.2.1 */
+
+		return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+					      ST21NFCA_WR_XCHG_DATA, skb->data,
+					      skb->len, cb, cb_context);
+	case ST21NFCA_RF_READER_ISO15693_GATE:
+		info->async_cb_type = ST21NFCA_CB_TYPE_READER_ISO15693;
+		info->async_cb = cb;
+		info->async_cb_context = cb_context;
+
+		*(u8 *)skb_push(skb, 1) = 0x17;
+
+		return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+					      ST21NFCA_WR_XCHG_DATA, skb->data,
+					      skb->len,
+					      st21nfca_hci_data_exchange_cb,
+					      info);
+		break;
+	default:
+		return 1;
+	}
+}
+
+static int st21nfca_hci_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	return st21nfca_tm_send_dep_res(hdev, skb);
+}
+
+static int st21nfca_hci_check_presence(struct nfc_hci_dev *hdev,
+				       struct nfc_target *target)
+{
+	u8 fwi = 0x11;
+
+	switch (target->hci_reader_gate) {
+	case NFC_HCI_RF_READER_A_GATE:
+	case NFC_HCI_RF_READER_B_GATE:
+		/*
+		 * PRESENCE_CHECK on those gates is available
+		 * However, the answer to this command is taking 3 * fwi
+		 * if the card is no present.
+		 * Instead, we send an empty I-Frame with a very short
+		 * configurable fwi ~604µs.
+		 */
+		return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+					ST21NFCA_WR_XCHG_DATA, &fwi, 1, NULL);
+	case ST21NFCA_RF_READER_14443_3_A_GATE:
+		return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+					ST21NFCA_RF_READER_CMD_PRESENCE_CHECK,
+					NULL, 0, NULL);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void st21nfca_hci_cmd_received(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd,
+				struct sk_buff *skb)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+	u8 gate = hdev->pipes[pipe].gate;
+
+	pr_debug("cmd: %x\n", cmd);
+
+	switch (cmd) {
+	case NFC_HCI_ANY_OPEN_PIPE:
+		if (gate != ST21NFCA_APDU_READER_GATE &&
+			hdev->pipes[pipe].dest_host != NFC_HCI_UICC_HOST_ID)
+			info->se_info.count_pipes++;
+
+		if (info->se_info.count_pipes == info->se_info.expected_pipes) {
+			del_timer_sync(&info->se_info.se_active_timer);
+			info->se_info.se_active = false;
+			info->se_info.count_pipes = 0;
+			complete(&info->se_info.req_completion);
+		}
+	break;
+	}
+}
+
+static int st21nfca_admin_event_received(struct nfc_hci_dev *hdev, u8 event,
+					struct sk_buff *skb)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	pr_debug("admin event: %x\n", event);
+
+	switch (event) {
+	case ST21NFCA_EVT_HOT_PLUG:
+		if (info->se_info.se_active) {
+			if (!ST21NFCA_EVT_HOT_PLUG_IS_INHIBITED(skb)) {
+				del_timer_sync(&info->se_info.se_active_timer);
+				info->se_info.se_active = false;
+				complete(&info->se_info.req_completion);
+			} else {
+				mod_timer(&info->se_info.se_active_timer,
+					jiffies +
+					msecs_to_jiffies(ST21NFCA_SE_TO_PIPES));
+			}
+		}
+	break;
+	default:
+		nfc_err(&hdev->ndev->dev, "Unexpected event on admin gate\n");
+	}
+	kfree_skb(skb);
+	return 0;
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the event, skb consumed
+ *    1: driver does not handle the event, please do standard processing
+ */
+static int st21nfca_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe,
+				       u8 event, struct sk_buff *skb)
+{
+	u8 gate = hdev->pipes[pipe].gate;
+	u8 host = hdev->pipes[pipe].dest_host;
+
+	pr_debug("hci event: %d gate: %x\n", event, gate);
+
+	switch (gate) {
+	case NFC_HCI_ADMIN_GATE:
+		return st21nfca_admin_event_received(hdev, event, skb);
+	case ST21NFCA_RF_CARD_F_GATE:
+		return st21nfca_dep_event_received(hdev, event, skb);
+	case ST21NFCA_CONNECTIVITY_GATE:
+		return st21nfca_connectivity_event_received(hdev, host,
+							event, skb);
+	case ST21NFCA_APDU_READER_GATE:
+		return st21nfca_apdu_reader_event_received(hdev, event, skb);
+	case NFC_HCI_LOOPBACK_GATE:
+		return st21nfca_hci_loopback_event_received(hdev, event, skb);
+	default:
+		return 1;
+	}
+}
+
+static struct nfc_hci_ops st21nfca_hci_ops = {
+	.open = st21nfca_hci_open,
+	.close = st21nfca_hci_close,
+	.load_session = st21nfca_hci_load_session,
+	.hci_ready = st21nfca_hci_ready,
+	.xmit = st21nfca_hci_xmit,
+	.start_poll = st21nfca_hci_start_poll,
+	.stop_poll = st21nfca_hci_stop_poll,
+	.dep_link_up = st21nfca_hci_dep_link_up,
+	.dep_link_down = st21nfca_hci_dep_link_down,
+	.target_from_gate = st21nfca_hci_target_from_gate,
+	.complete_target_discovered = st21nfca_hci_complete_target_discovered,
+	.im_transceive = st21nfca_hci_im_transceive,
+	.tm_send = st21nfca_hci_tm_send,
+	.check_presence = st21nfca_hci_check_presence,
+	.event_received = st21nfca_hci_event_received,
+	.cmd_received = st21nfca_hci_cmd_received,
+	.discover_se = st21nfca_hci_discover_se,
+	.enable_se = st21nfca_hci_enable_se,
+	.disable_se = st21nfca_hci_disable_se,
+	.se_io = st21nfca_hci_se_io,
+};
+
+int st21nfca_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops,
+		       char *llc_name, int phy_headroom, int phy_tailroom,
+		       int phy_payload, struct nfc_hci_dev **hdev,
+			   struct st21nfca_se_status *se_status)
+{
+	struct st21nfca_hci_info *info;
+	int r = 0;
+	int dev_num;
+	u32 protocols;
+	struct nfc_hci_init_data init_data;
+	unsigned long quirks = 0;
+
+	info = kzalloc(sizeof(struct st21nfca_hci_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->phy_ops = phy_ops;
+	info->phy_id = phy_id;
+	info->state = ST21NFCA_ST_COLD;
+	mutex_init(&info->info_lock);
+
+	init_data.gate_count = ARRAY_SIZE(st21nfca_gates);
+
+	memcpy(init_data.gates, st21nfca_gates, sizeof(st21nfca_gates));
+
+	/*
+	 * Session id must include the driver name + i2c bus addr
+	 * persistent info to discriminate 2 identical chips
+	 */
+	dev_num = find_first_zero_bit(dev_mask, ST21NFCA_NUM_DEVICES);
+	if (dev_num >= ST21NFCA_NUM_DEVICES) {
+		r = -ENODEV;
+		goto err_alloc_hdev;
+	}
+
+	set_bit(dev_num, dev_mask);
+
+	scnprintf(init_data.session_id, sizeof(init_data.session_id), "%s%2x",
+		  "ST21AH", dev_num);
+
+	protocols = NFC_PROTO_JEWEL_MASK |
+	    NFC_PROTO_MIFARE_MASK |
+	    NFC_PROTO_FELICA_MASK |
+	    NFC_PROTO_ISO14443_MASK |
+	    NFC_PROTO_ISO14443_B_MASK |
+	    NFC_PROTO_ISO15693_MASK |
+	    NFC_PROTO_NFC_DEP_MASK;
+
+	set_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &quirks);
+
+	info->hdev =
+	    nfc_hci_allocate_device(&st21nfca_hci_ops, &init_data, quirks,
+				    protocols, llc_name,
+				    phy_headroom + ST21NFCA_CMDS_HEADROOM,
+				    phy_tailroom, phy_payload);
+
+	if (!info->hdev) {
+		pr_err("Cannot allocate nfc hdev.\n");
+		r = -ENOMEM;
+		goto err_alloc_hdev;
+	}
+
+	info->se_status = se_status;
+
+	nfc_hci_set_clientdata(info->hdev, info);
+
+	r = nfc_hci_register_device(info->hdev);
+	if (r)
+		goto err_regdev;
+
+	*hdev = info->hdev;
+	st21nfca_dep_init(info->hdev);
+	st21nfca_se_init(info->hdev);
+	st21nfca_vendor_cmds_init(info->hdev);
+
+	return 0;
+
+err_regdev:
+	nfc_hci_free_device(info->hdev);
+
+err_alloc_hdev:
+	kfree(info);
+
+	return r;
+}
+EXPORT_SYMBOL(st21nfca_hci_probe);
+
+void st21nfca_hci_remove(struct nfc_hci_dev *hdev)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	st21nfca_dep_deinit(hdev);
+	st21nfca_se_deinit(hdev);
+	nfc_hci_unregister_device(hdev);
+	nfc_hci_free_device(hdev);
+	kfree(info);
+}
+EXPORT_SYMBOL(st21nfca_hci_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/st21nfca/dep.c b/drivers/nfc/st21nfca/dep.c
new file mode 100644
index 000000000..7399eb2c5
--- /dev/null
+++ b/drivers/nfc/st21nfca/dep.c
@@ -0,0 +1,691 @@
+/*
+ * Copyright (C) 2014  STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <net/nfc/hci.h>
+
+#include "st21nfca.h"
+
+#define ST21NFCA_NFCIP1_INITIATOR 0x00
+#define ST21NFCA_NFCIP1_REQ 0xd4
+#define ST21NFCA_NFCIP1_RES 0xd5
+#define ST21NFCA_NFCIP1_ATR_REQ 0x00
+#define ST21NFCA_NFCIP1_ATR_RES 0x01
+#define ST21NFCA_NFCIP1_PSL_REQ 0x04
+#define ST21NFCA_NFCIP1_PSL_RES 0x05
+#define ST21NFCA_NFCIP1_DEP_REQ 0x06
+#define ST21NFCA_NFCIP1_DEP_RES 0x07
+
+#define ST21NFCA_NFC_DEP_PFB_PNI(pfb)     ((pfb) & 0x03)
+#define ST21NFCA_NFC_DEP_PFB_TYPE(pfb) ((pfb) & 0xE0)
+#define ST21NFCA_NFC_DEP_PFB_IS_TIMEOUT(pfb) \
+				((pfb) & ST21NFCA_NFC_DEP_PFB_TIMEOUT_BIT)
+#define ST21NFCA_NFC_DEP_DID_BIT_SET(pfb) ((pfb) & 0x04)
+#define ST21NFCA_NFC_DEP_NAD_BIT_SET(pfb) ((pfb) & 0x08)
+#define ST21NFCA_NFC_DEP_PFB_TIMEOUT_BIT 0x10
+
+#define ST21NFCA_NFC_DEP_PFB_IS_TIMEOUT(pfb) \
+				((pfb) & ST21NFCA_NFC_DEP_PFB_TIMEOUT_BIT)
+
+#define ST21NFCA_NFC_DEP_PFB_I_PDU          0x00
+#define ST21NFCA_NFC_DEP_PFB_ACK_NACK_PDU   0x40
+#define ST21NFCA_NFC_DEP_PFB_SUPERVISOR_PDU 0x80
+
+#define ST21NFCA_ATR_REQ_MIN_SIZE 17
+#define ST21NFCA_ATR_REQ_MAX_SIZE 65
+#define ST21NFCA_LR_BITS_PAYLOAD_SIZE_254B 0x30
+#define ST21NFCA_GB_BIT  0x02
+
+#define ST21NFCA_EVT_SEND_DATA		0x10
+#define ST21NFCA_EVT_FIELD_ON           0x11
+#define ST21NFCA_EVT_CARD_DEACTIVATED   0x12
+#define ST21NFCA_EVT_CARD_ACTIVATED     0x13
+#define ST21NFCA_EVT_FIELD_OFF          0x14
+
+#define ST21NFCA_EVT_CARD_F_BITRATE 0x16
+#define ST21NFCA_EVT_READER_F_BITRATE 0x13
+#define	ST21NFCA_PSL_REQ_SEND_SPEED(brs) (brs & 0x38)
+#define ST21NFCA_PSL_REQ_RECV_SPEED(brs) (brs & 0x07)
+#define ST21NFCA_PP2LRI(pp) ((pp & 0x30) >> 4)
+#define ST21NFCA_CARD_BITRATE_212 0x01
+#define ST21NFCA_CARD_BITRATE_424 0x02
+
+#define ST21NFCA_DEFAULT_TIMEOUT 0x0a
+
+
+#define PROTOCOL_ERR(req) pr_err("%d: ST21NFCA Protocol error: %s\n", \
+				 __LINE__, req)
+
+struct st21nfca_atr_req {
+	u8 length;
+	u8 cmd0;
+	u8 cmd1;
+	u8 nfcid3[NFC_NFCID3_MAXSIZE];
+	u8 did;
+	u8 bsi;
+	u8 bri;
+	u8 ppi;
+	u8 gbi[0];
+} __packed;
+
+struct st21nfca_atr_res {
+	u8 length;
+	u8 cmd0;
+	u8 cmd1;
+	u8 nfcid3[NFC_NFCID3_MAXSIZE];
+	u8 did;
+	u8 bsi;
+	u8 bri;
+	u8 to;
+	u8 ppi;
+	u8 gbi[0];
+} __packed;
+
+struct st21nfca_psl_req {
+	u8 length;
+	u8 cmd0;
+	u8 cmd1;
+	u8 did;
+	u8 brs;
+	u8 fsl;
+} __packed;
+
+struct st21nfca_psl_res {
+	u8 length;
+	u8 cmd0;
+	u8 cmd1;
+	u8 did;
+} __packed;
+
+struct st21nfca_dep_req_res {
+	u8 length;
+	u8 cmd0;
+	u8 cmd1;
+	u8 pfb;
+	u8 did;
+	u8 nad;
+} __packed;
+
+static void st21nfca_tx_work(struct work_struct *work)
+{
+	struct st21nfca_hci_info *info = container_of(work,
+						struct st21nfca_hci_info,
+						dep_info.tx_work);
+
+	struct nfc_dev *dev;
+	struct sk_buff *skb;
+
+	if (info) {
+		dev = info->hdev->ndev;
+		skb = info->dep_info.tx_pending;
+
+		device_lock(&dev->dev);
+
+		nfc_hci_send_cmd_async(info->hdev, ST21NFCA_RF_READER_F_GATE,
+				ST21NFCA_WR_XCHG_DATA, skb->data, skb->len,
+				info->async_cb, info);
+		device_unlock(&dev->dev);
+		kfree_skb(skb);
+	}
+}
+
+static void st21nfca_im_send_pdu(struct st21nfca_hci_info *info,
+						struct sk_buff *skb)
+{
+	info->dep_info.tx_pending = skb;
+	schedule_work(&info->dep_info.tx_work);
+}
+
+static int st21nfca_tm_send_atr_res(struct nfc_hci_dev *hdev,
+				    struct st21nfca_atr_req *atr_req)
+{
+	struct st21nfca_atr_res *atr_res;
+	struct sk_buff *skb;
+	size_t gb_len;
+	int r;
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
+	skb = alloc_skb(atr_req->length + 1, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put(skb, sizeof(struct st21nfca_atr_res));
+
+	atr_res = (struct st21nfca_atr_res *)skb->data;
+	memset(atr_res, 0, sizeof(struct st21nfca_atr_res));
+
+	atr_res->length = atr_req->length + 1;
+	atr_res->cmd0 = ST21NFCA_NFCIP1_RES;
+	atr_res->cmd1 = ST21NFCA_NFCIP1_ATR_RES;
+
+	memcpy(atr_res->nfcid3, atr_req->nfcid3, 6);
+	atr_res->bsi = 0x00;
+	atr_res->bri = 0x00;
+	atr_res->to = ST21NFCA_DEFAULT_TIMEOUT;
+	atr_res->ppi = ST21NFCA_LR_BITS_PAYLOAD_SIZE_254B;
+
+	if (gb_len) {
+		skb_put(skb, gb_len);
+
+		atr_res->ppi |= ST21NFCA_GB_BIT;
+		memcpy(atr_res->gbi, atr_req->gbi, gb_len);
+		r = nfc_set_remote_general_bytes(hdev->ndev, atr_res->gbi,
+						  gb_len);
+		if (r < 0) {
+			kfree_skb(skb);
+			return r;
+		}
+	}
+
+	info->dep_info.curr_nfc_dep_pni = 0;
+
+	r = nfc_hci_send_event(hdev, ST21NFCA_RF_CARD_F_GATE,
+				ST21NFCA_EVT_SEND_DATA, skb->data, skb->len);
+	kfree_skb(skb);
+	return r;
+}
+
+static int st21nfca_tm_recv_atr_req(struct nfc_hci_dev *hdev,
+				    struct sk_buff *skb)
+{
+	struct st21nfca_atr_req *atr_req;
+	size_t gb_len;
+	int r;
+
+	skb_trim(skb, skb->len - 1);
+
+	if (!skb->len) {
+		r = -EIO;
+		goto exit;
+	}
+
+	if (skb->len < ST21NFCA_ATR_REQ_MIN_SIZE) {
+		r = -EPROTO;
+		goto exit;
+	}
+
+	atr_req = (struct st21nfca_atr_req *)skb->data;
+
+	if (atr_req->length < sizeof(struct st21nfca_atr_req)) {
+		r = -EPROTO;
+		goto exit;
+	}
+
+	r = st21nfca_tm_send_atr_res(hdev, atr_req);
+	if (r)
+		goto exit;
+
+	gb_len = skb->len - sizeof(struct st21nfca_atr_req);
+
+	r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK,
+			      NFC_COMM_PASSIVE, atr_req->gbi, gb_len);
+	if (r)
+		goto exit;
+
+	r = 0;
+
+exit:
+	return r;
+}
+
+static int st21nfca_tm_send_psl_res(struct nfc_hci_dev *hdev,
+				    struct st21nfca_psl_req *psl_req)
+{
+	struct st21nfca_psl_res *psl_res;
+	struct sk_buff *skb;
+	u8 bitrate[2] = {0, 0};
+	int r;
+
+	skb = alloc_skb(sizeof(struct st21nfca_psl_res), GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+	skb_put(skb, sizeof(struct st21nfca_psl_res));
+
+	psl_res = (struct st21nfca_psl_res *)skb->data;
+
+	psl_res->length = sizeof(struct st21nfca_psl_res);
+	psl_res->cmd0 = ST21NFCA_NFCIP1_RES;
+	psl_res->cmd1 = ST21NFCA_NFCIP1_PSL_RES;
+	psl_res->did = psl_req->did;
+
+	r = nfc_hci_send_event(hdev, ST21NFCA_RF_CARD_F_GATE,
+				ST21NFCA_EVT_SEND_DATA, skb->data, skb->len);
+	if (r < 0)
+		goto error;
+
+	/*
+	 * ST21NFCA only support P2P passive.
+	 * PSL_REQ BRS value != 0 has only a meaning to
+	 * change technology to type F.
+	 * We change to BITRATE 424Kbits.
+	 * In other case switch to BITRATE 106Kbits.
+	 */
+	if (ST21NFCA_PSL_REQ_SEND_SPEED(psl_req->brs) &&
+	    ST21NFCA_PSL_REQ_RECV_SPEED(psl_req->brs)) {
+		bitrate[0] = ST21NFCA_CARD_BITRATE_424;
+		bitrate[1] = ST21NFCA_CARD_BITRATE_424;
+	}
+
+	/* Send an event to change bitrate change event to card f */
+	r = nfc_hci_send_event(hdev, ST21NFCA_RF_CARD_F_GATE,
+			ST21NFCA_EVT_CARD_F_BITRATE, bitrate, 2);
+error:
+	kfree_skb(skb);
+	return r;
+}
+
+static int st21nfca_tm_recv_psl_req(struct nfc_hci_dev *hdev,
+				    struct sk_buff *skb)
+{
+	struct st21nfca_psl_req *psl_req;
+	int r;
+
+	skb_trim(skb, skb->len - 1);
+
+	if (!skb->len) {
+		r = -EIO;
+		goto exit;
+	}
+
+	psl_req = (struct st21nfca_psl_req *)skb->data;
+
+	if (skb->len < sizeof(struct st21nfca_psl_req)) {
+		r = -EIO;
+		goto exit;
+	}
+
+	r = st21nfca_tm_send_psl_res(hdev, psl_req);
+exit:
+	return r;
+}
+
+int st21nfca_tm_send_dep_res(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	int r;
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	*(u8 *)skb_push(skb, 1) = info->dep_info.curr_nfc_dep_pni;
+	*(u8 *)skb_push(skb, 1) = ST21NFCA_NFCIP1_DEP_RES;
+	*(u8 *)skb_push(skb, 1) = ST21NFCA_NFCIP1_RES;
+	*(u8 *)skb_push(skb, 1) = skb->len;
+
+	r = nfc_hci_send_event(hdev, ST21NFCA_RF_CARD_F_GATE,
+			ST21NFCA_EVT_SEND_DATA, skb->data, skb->len);
+	kfree_skb(skb);
+
+	return r;
+}
+EXPORT_SYMBOL(st21nfca_tm_send_dep_res);
+
+static int st21nfca_tm_recv_dep_req(struct nfc_hci_dev *hdev,
+				    struct sk_buff *skb)
+{
+	struct st21nfca_dep_req_res *dep_req;
+	u8 size;
+	int r;
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	skb_trim(skb, skb->len - 1);
+
+	size = 4;
+
+	dep_req = (struct st21nfca_dep_req_res *)skb->data;
+	if (skb->len < size) {
+		r = -EIO;
+		goto exit;
+	}
+
+	if (ST21NFCA_NFC_DEP_DID_BIT_SET(dep_req->pfb))
+		size++;
+	if (ST21NFCA_NFC_DEP_NAD_BIT_SET(dep_req->pfb))
+		size++;
+
+	if (skb->len < size) {
+		r = -EIO;
+		goto exit;
+	}
+
+	/* Receiving DEP_REQ - Decoding */
+	switch (ST21NFCA_NFC_DEP_PFB_TYPE(dep_req->pfb)) {
+	case ST21NFCA_NFC_DEP_PFB_I_PDU:
+		info->dep_info.curr_nfc_dep_pni =
+				ST21NFCA_NFC_DEP_PFB_PNI(dep_req->pfb);
+		break;
+	case ST21NFCA_NFC_DEP_PFB_ACK_NACK_PDU:
+		pr_err("Received a ACK/NACK PDU\n");
+		break;
+	case ST21NFCA_NFC_DEP_PFB_SUPERVISOR_PDU:
+		pr_err("Received a SUPERVISOR PDU\n");
+		break;
+	}
+
+	skb_pull(skb, size);
+
+	return nfc_tm_data_received(hdev->ndev, skb);
+exit:
+	return r;
+}
+
+static int st21nfca_tm_event_send_data(struct nfc_hci_dev *hdev,
+				struct sk_buff *skb)
+{
+	u8 cmd0, cmd1;
+	int r;
+
+	cmd0 = skb->data[1];
+	switch (cmd0) {
+	case ST21NFCA_NFCIP1_REQ:
+		cmd1 = skb->data[2];
+		switch (cmd1) {
+		case ST21NFCA_NFCIP1_ATR_REQ:
+			r = st21nfca_tm_recv_atr_req(hdev, skb);
+			break;
+		case ST21NFCA_NFCIP1_PSL_REQ:
+			r = st21nfca_tm_recv_psl_req(hdev, skb);
+			break;
+		case ST21NFCA_NFCIP1_DEP_REQ:
+			r = st21nfca_tm_recv_dep_req(hdev, skb);
+			break;
+		default:
+			return 1;
+		}
+	default:
+		return 1;
+	}
+	return r;
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the event, skb consumed
+ *    1: driver does not handle the event, please do standard processing
+ */
+int st21nfca_dep_event_received(struct nfc_hci_dev *hdev,
+				u8 event, struct sk_buff *skb)
+{
+	int r = 0;
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	pr_debug("dep event: %d\n", event);
+
+	switch (event) {
+	case ST21NFCA_EVT_CARD_ACTIVATED:
+		info->dep_info.curr_nfc_dep_pni = 0;
+		break;
+	case ST21NFCA_EVT_CARD_DEACTIVATED:
+		break;
+	case ST21NFCA_EVT_FIELD_ON:
+		break;
+	case ST21NFCA_EVT_FIELD_OFF:
+		break;
+	case ST21NFCA_EVT_SEND_DATA:
+		r = st21nfca_tm_event_send_data(hdev, skb);
+		if (r < 0)
+			return r;
+		return 0;
+	default:
+		nfc_err(&hdev->ndev->dev, "Unexpected event on card f gate\n");
+		return 1;
+	}
+	kfree_skb(skb);
+	return r;
+}
+EXPORT_SYMBOL(st21nfca_dep_event_received);
+
+static void st21nfca_im_send_psl_req(struct nfc_hci_dev *hdev, u8 did, u8 bsi,
+				     u8 bri, u8 lri)
+{
+	struct sk_buff *skb;
+	struct st21nfca_psl_req *psl_req;
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	skb =
+	    alloc_skb(sizeof(struct st21nfca_psl_req) + 1, GFP_KERNEL);
+	if (!skb)
+		return;
+	skb_reserve(skb, 1);
+
+	skb_put(skb, sizeof(struct st21nfca_psl_req));
+	psl_req = (struct st21nfca_psl_req *) skb->data;
+
+	psl_req->length = sizeof(struct st21nfca_psl_req);
+	psl_req->cmd0 = ST21NFCA_NFCIP1_REQ;
+	psl_req->cmd1 = ST21NFCA_NFCIP1_PSL_REQ;
+	psl_req->did = did;
+	psl_req->brs = (0x30 & bsi << 4) | (bri & 0x03);
+	psl_req->fsl = lri;
+
+	*(u8 *)skb_push(skb, 1) = info->dep_info.to | 0x10;
+
+	st21nfca_im_send_pdu(info, skb);
+}
+
+#define ST21NFCA_CB_TYPE_READER_F 1
+static void st21nfca_im_recv_atr_res_cb(void *context, struct sk_buff *skb,
+					int err)
+{
+	struct st21nfca_hci_info *info = context;
+	struct st21nfca_atr_res *atr_res;
+	int r;
+
+	if (err != 0)
+		return;
+
+	if (!skb)
+		return;
+
+	switch (info->async_cb_type) {
+	case ST21NFCA_CB_TYPE_READER_F:
+		skb_trim(skb, skb->len - 1);
+		atr_res = (struct st21nfca_atr_res *)skb->data;
+		r = nfc_set_remote_general_bytes(info->hdev->ndev,
+				atr_res->gbi,
+				skb->len - sizeof(struct st21nfca_atr_res));
+		if (r < 0)
+			return;
+
+		if (atr_res->to >= 0x0e)
+			info->dep_info.to = 0x0e;
+		else
+			info->dep_info.to = atr_res->to + 1;
+
+		info->dep_info.to |= 0x10;
+
+		r = nfc_dep_link_is_up(info->hdev->ndev, info->dep_info.idx,
+					NFC_COMM_PASSIVE, NFC_RF_INITIATOR);
+		if (r < 0)
+			return;
+
+		info->dep_info.curr_nfc_dep_pni = 0;
+		if (ST21NFCA_PP2LRI(atr_res->ppi) != info->dep_info.lri)
+			st21nfca_im_send_psl_req(info->hdev, atr_res->did,
+						atr_res->bsi, atr_res->bri,
+						ST21NFCA_PP2LRI(atr_res->ppi));
+		break;
+	default:
+		kfree_skb(skb);
+		break;
+	}
+}
+
+int st21nfca_im_send_atr_req(struct nfc_hci_dev *hdev, u8 *gb, size_t gb_len)
+{
+	struct sk_buff *skb;
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+	struct st21nfca_atr_req *atr_req;
+	struct nfc_target *target;
+	uint size;
+
+	info->dep_info.to = ST21NFCA_DEFAULT_TIMEOUT;
+	size = ST21NFCA_ATR_REQ_MIN_SIZE + gb_len;
+	if (size > ST21NFCA_ATR_REQ_MAX_SIZE) {
+		PROTOCOL_ERR("14.6.1.1");
+		return -EINVAL;
+	}
+
+	skb =
+	    alloc_skb(sizeof(struct st21nfca_atr_req) + gb_len + 1, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_reserve(skb, 1);
+
+	skb_put(skb, sizeof(struct st21nfca_atr_req));
+
+	atr_req = (struct st21nfca_atr_req *)skb->data;
+	memset(atr_req, 0, sizeof(struct st21nfca_atr_req));
+
+	atr_req->cmd0 = ST21NFCA_NFCIP1_REQ;
+	atr_req->cmd1 = ST21NFCA_NFCIP1_ATR_REQ;
+	memset(atr_req->nfcid3, 0, NFC_NFCID3_MAXSIZE);
+	target = hdev->ndev->targets;
+
+	if (target->sensf_res_len > 0)
+		memcpy(atr_req->nfcid3, target->sensf_res,
+				target->sensf_res_len);
+	else
+		get_random_bytes(atr_req->nfcid3, NFC_NFCID3_MAXSIZE);
+
+	atr_req->did = 0x0;
+
+	atr_req->bsi = 0x00;
+	atr_req->bri = 0x00;
+	atr_req->ppi = ST21NFCA_LR_BITS_PAYLOAD_SIZE_254B;
+	if (gb_len) {
+		atr_req->ppi |= ST21NFCA_GB_BIT;
+		skb_put_data(skb, gb, gb_len);
+	}
+	atr_req->length = sizeof(struct st21nfca_atr_req) + hdev->gb_len;
+
+	*(u8 *)skb_push(skb, 1) = info->dep_info.to | 0x10; /* timeout */
+
+	info->async_cb_type = ST21NFCA_CB_TYPE_READER_F;
+	info->async_cb_context = info;
+	info->async_cb = st21nfca_im_recv_atr_res_cb;
+	info->dep_info.bri = atr_req->bri;
+	info->dep_info.bsi = atr_req->bsi;
+	info->dep_info.lri = ST21NFCA_PP2LRI(atr_req->ppi);
+
+	return nfc_hci_send_cmd_async(hdev, ST21NFCA_RF_READER_F_GATE,
+				ST21NFCA_WR_XCHG_DATA, skb->data,
+				skb->len, info->async_cb, info);
+}
+EXPORT_SYMBOL(st21nfca_im_send_atr_req);
+
+static void st21nfca_im_recv_dep_res_cb(void *context, struct sk_buff *skb,
+					int err)
+{
+	struct st21nfca_hci_info *info = context;
+	struct st21nfca_dep_req_res *dep_res;
+
+	int size;
+
+	if (err != 0)
+		return;
+
+	if (!skb)
+		return;
+
+	switch (info->async_cb_type) {
+	case ST21NFCA_CB_TYPE_READER_F:
+		dep_res = (struct st21nfca_dep_req_res *)skb->data;
+
+		size = 3;
+		if (skb->len < size)
+			goto exit;
+
+		if (ST21NFCA_NFC_DEP_DID_BIT_SET(dep_res->pfb))
+			size++;
+		if (ST21NFCA_NFC_DEP_NAD_BIT_SET(dep_res->pfb))
+			size++;
+
+		if (skb->len < size)
+			goto exit;
+
+		skb_trim(skb, skb->len - 1);
+
+		/* Receiving DEP_REQ - Decoding */
+		switch (ST21NFCA_NFC_DEP_PFB_TYPE(dep_res->pfb)) {
+		case ST21NFCA_NFC_DEP_PFB_ACK_NACK_PDU:
+			pr_err("Received a ACK/NACK PDU\n");
+		case ST21NFCA_NFC_DEP_PFB_I_PDU:
+			info->dep_info.curr_nfc_dep_pni =
+			    ST21NFCA_NFC_DEP_PFB_PNI(dep_res->pfb + 1);
+			size++;
+			skb_pull(skb, size);
+			nfc_tm_data_received(info->hdev->ndev, skb);
+			break;
+		case ST21NFCA_NFC_DEP_PFB_SUPERVISOR_PDU:
+			pr_err("Received a SUPERVISOR PDU\n");
+			skb_pull(skb, size);
+			*(u8 *)skb_push(skb, 1) = ST21NFCA_NFCIP1_DEP_REQ;
+			*(u8 *)skb_push(skb, 1) = ST21NFCA_NFCIP1_REQ;
+			*(u8 *)skb_push(skb, 1) = skb->len;
+			*(u8 *)skb_push(skb, 1) = info->dep_info.to | 0x10;
+
+			st21nfca_im_send_pdu(info, skb);
+			break;
+		}
+
+		return;
+	default:
+		break;
+	}
+
+exit:
+	kfree_skb(skb);
+}
+
+int st21nfca_im_send_dep_req(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	info->async_cb_type = ST21NFCA_CB_TYPE_READER_F;
+	info->async_cb_context = info;
+	info->async_cb = st21nfca_im_recv_dep_res_cb;
+
+	*(u8 *)skb_push(skb, 1) = info->dep_info.curr_nfc_dep_pni;
+	*(u8 *)skb_push(skb, 1) = ST21NFCA_NFCIP1_DEP_REQ;
+	*(u8 *)skb_push(skb, 1) = ST21NFCA_NFCIP1_REQ;
+	*(u8 *)skb_push(skb, 1) = skb->len;
+
+	*(u8 *)skb_push(skb, 1) = info->dep_info.to | 0x10;
+
+	return nfc_hci_send_cmd_async(hdev, ST21NFCA_RF_READER_F_GATE,
+				      ST21NFCA_WR_XCHG_DATA,
+				      skb->data, skb->len,
+				      info->async_cb, info);
+}
+EXPORT_SYMBOL(st21nfca_im_send_dep_req);
+
+void st21nfca_dep_init(struct nfc_hci_dev *hdev)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	INIT_WORK(&info->dep_info.tx_work, st21nfca_tx_work);
+	info->dep_info.curr_nfc_dep_pni = 0;
+	info->dep_info.idx = 0;
+	info->dep_info.to = ST21NFCA_DEFAULT_TIMEOUT;
+}
+EXPORT_SYMBOL(st21nfca_dep_init);
+
+void st21nfca_dep_deinit(struct nfc_hci_dev *hdev)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	cancel_work_sync(&info->dep_info.tx_work);
+}
+EXPORT_SYMBOL(st21nfca_dep_deinit);
diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c
new file mode 100644
index 000000000..ebea3b4dd
--- /dev/null
+++ b/drivers/nfc/st21nfca/i2c.c
@@ -0,0 +1,635 @@
+/*
+ * I2C Link Layer for ST21NFCA HCI based Driver
+ * Copyright (C) 2014  STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/crc-ccitt.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/nfc.h>
+#include <linux/firmware.h>
+
+#include <asm/unaligned.h>
+
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+#include <net/nfc/nfc.h>
+
+#include "st21nfca.h"
+
+/*
+ * Every frame starts with ST21NFCA_SOF_EOF and ends with ST21NFCA_SOF_EOF.
+ * Because ST21NFCA_SOF_EOF is a possible data value, there is a mecanism
+ * called byte stuffing has been introduced.
+ *
+ * if byte == ST21NFCA_SOF_EOF or ST21NFCA_ESCAPE_BYTE_STUFFING
+ * - insert ST21NFCA_ESCAPE_BYTE_STUFFING (escape byte)
+ * - xor byte with ST21NFCA_BYTE_STUFFING_MASK
+ */
+#define ST21NFCA_SOF_EOF		0x7e
+#define ST21NFCA_BYTE_STUFFING_MASK	0x20
+#define ST21NFCA_ESCAPE_BYTE_STUFFING	0x7d
+
+/* SOF + 00 */
+#define ST21NFCA_FRAME_HEADROOM			2
+
+/* 2 bytes crc + EOF */
+#define ST21NFCA_FRAME_TAILROOM 3
+#define IS_START_OF_FRAME(buf) (buf[0] == ST21NFCA_SOF_EOF && \
+				buf[1] == 0)
+
+#define ST21NFCA_HCI_DRIVER_NAME "st21nfca_hci"
+#define ST21NFCA_HCI_I2C_DRIVER_NAME "st21nfca_hci_i2c"
+
+struct st21nfca_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct nfc_hci_dev *hdev;
+
+	struct gpio_desc *gpiod_ena;
+	struct st21nfca_se_status se_status;
+
+	struct sk_buff *pending_skb;
+	int current_read_len;
+	/*
+	 * crc might have fail because i2c macro
+	 * is disable due to other interface activity
+	 */
+	int crc_trials;
+
+	int powered;
+	int run_mode;
+
+	/*
+	 * < 0 if hardware error occured (e.g. i2c err)
+	 * and prevents normal operation.
+	 */
+	int hard_fault;
+	struct mutex phy_lock;
+};
+
+static u8 len_seq[] = { 16, 24, 12, 29 };
+static u16 wait_tab[] = { 2, 3, 5, 15, 20, 40};
+
+#define I2C_DUMP_SKB(info, skb)					\
+do {								\
+	pr_debug("%s:\n", info);				\
+	print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET,	\
+		       16, 1, (skb)->data, (skb)->len, 0);	\
+} while (0)
+
+/*
+ * In order to get the CLF in a known state we generate an internal reboot
+ * using a proprietary command.
+ * Once the reboot is completed, we expect to receive a ST21NFCA_SOF_EOF
+ * fill buffer.
+ */
+static int st21nfca_hci_platform_init(struct st21nfca_i2c_phy *phy)
+{
+	u16 wait_reboot[] = { 50, 300, 1000 };
+	char reboot_cmd[] = { 0x7E, 0x66, 0x48, 0xF6, 0x7E };
+	u8 tmp[ST21NFCA_HCI_LLC_MAX_SIZE];
+	int i, r = -1;
+
+	for (i = 0; i < ARRAY_SIZE(wait_reboot) && r < 0; i++) {
+		r = i2c_master_send(phy->i2c_dev, reboot_cmd,
+				    sizeof(reboot_cmd));
+		if (r < 0)
+			msleep(wait_reboot[i]);
+	}
+	if (r < 0)
+		return r;
+
+	/* CLF is spending about 20ms to do an internal reboot */
+	msleep(20);
+	r = -1;
+	for (i = 0; i < ARRAY_SIZE(wait_reboot) && r < 0; i++) {
+		r = i2c_master_recv(phy->i2c_dev, tmp,
+				    ST21NFCA_HCI_LLC_MAX_SIZE);
+		if (r < 0)
+			msleep(wait_reboot[i]);
+	}
+	if (r < 0)
+		return r;
+
+	for (i = 0; i < ST21NFCA_HCI_LLC_MAX_SIZE &&
+		tmp[i] == ST21NFCA_SOF_EOF; i++)
+		;
+
+	if (r != ST21NFCA_HCI_LLC_MAX_SIZE)
+		return -ENODEV;
+
+	usleep_range(1000, 1500);
+	return 0;
+}
+
+static int st21nfca_hci_i2c_enable(void *phy_id)
+{
+	struct st21nfca_i2c_phy *phy = phy_id;
+
+	gpiod_set_value(phy->gpiod_ena, 1);
+	phy->powered = 1;
+	phy->run_mode = ST21NFCA_HCI_MODE;
+
+	usleep_range(10000, 15000);
+
+	return 0;
+}
+
+static void st21nfca_hci_i2c_disable(void *phy_id)
+{
+	struct st21nfca_i2c_phy *phy = phy_id;
+
+	gpiod_set_value(phy->gpiod_ena, 0);
+
+	phy->powered = 0;
+}
+
+static void st21nfca_hci_add_len_crc(struct sk_buff *skb)
+{
+	u16 crc;
+	u8 tmp;
+
+	*(u8 *)skb_push(skb, 1) = 0;
+
+	crc = crc_ccitt(0xffff, skb->data, skb->len);
+	crc = ~crc;
+
+	tmp = crc & 0x00ff;
+	skb_put_u8(skb, tmp);
+
+	tmp = (crc >> 8) & 0x00ff;
+	skb_put_u8(skb, tmp);
+}
+
+static void st21nfca_hci_remove_len_crc(struct sk_buff *skb)
+{
+	skb_pull(skb, ST21NFCA_FRAME_HEADROOM);
+	skb_trim(skb, skb->len - ST21NFCA_FRAME_TAILROOM);
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int st21nfca_hci_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+	int r = -1, i, j;
+	struct st21nfca_i2c_phy *phy = phy_id;
+	struct i2c_client *client = phy->i2c_dev;
+	u8 tmp[ST21NFCA_HCI_LLC_MAX_SIZE * 2];
+
+	I2C_DUMP_SKB("st21nfca_hci_i2c_write", skb);
+
+	if (phy->hard_fault != 0)
+		return phy->hard_fault;
+
+	/*
+	 * Compute CRC before byte stuffing computation on frame
+	 * Note st21nfca_hci_add_len_crc is doing a byte stuffing
+	 * on its own value
+	 */
+	st21nfca_hci_add_len_crc(skb);
+
+	/* add ST21NFCA_SOF_EOF on tail */
+	skb_put_u8(skb, ST21NFCA_SOF_EOF);
+	/* add ST21NFCA_SOF_EOF on head */
+	*(u8 *)skb_push(skb, 1) = ST21NFCA_SOF_EOF;
+
+	/*
+	 * Compute byte stuffing
+	 * if byte == ST21NFCA_SOF_EOF or ST21NFCA_ESCAPE_BYTE_STUFFING
+	 * insert ST21NFCA_ESCAPE_BYTE_STUFFING (escape byte)
+	 * xor byte with ST21NFCA_BYTE_STUFFING_MASK
+	 */
+	tmp[0] = skb->data[0];
+	for (i = 1, j = 1; i < skb->len - 1; i++, j++) {
+		if (skb->data[i] == ST21NFCA_SOF_EOF
+		    || skb->data[i] == ST21NFCA_ESCAPE_BYTE_STUFFING) {
+			tmp[j] = ST21NFCA_ESCAPE_BYTE_STUFFING;
+			j++;
+			tmp[j] = skb->data[i] ^ ST21NFCA_BYTE_STUFFING_MASK;
+		} else {
+			tmp[j] = skb->data[i];
+		}
+	}
+	tmp[j] = skb->data[i];
+	j++;
+
+	/*
+	 * Manage sleep mode
+	 * Try 3 times to send data with delay between each
+	 */
+	mutex_lock(&phy->phy_lock);
+	for (i = 0; i < ARRAY_SIZE(wait_tab) && r < 0; i++) {
+		r = i2c_master_send(client, tmp, j);
+		if (r < 0)
+			msleep(wait_tab[i]);
+	}
+	mutex_unlock(&phy->phy_lock);
+
+	if (r >= 0) {
+		if (r != j)
+			r = -EREMOTEIO;
+		else
+			r = 0;
+	}
+
+	st21nfca_hci_remove_len_crc(skb);
+
+	return r;
+}
+
+static int get_frame_size(u8 *buf, int buflen)
+{
+	int len = 0;
+
+	if (buf[len + 1] == ST21NFCA_SOF_EOF)
+		return 0;
+
+	for (len = 1; len < buflen && buf[len] != ST21NFCA_SOF_EOF; len++)
+		;
+
+	return len;
+}
+
+static int check_crc(u8 *buf, int buflen)
+{
+	u16 crc;
+
+	crc = crc_ccitt(0xffff, buf, buflen - 2);
+	crc = ~crc;
+
+	if (buf[buflen - 2] != (crc & 0xff) || buf[buflen - 1] != (crc >> 8)) {
+		pr_err(ST21NFCA_HCI_DRIVER_NAME
+		       ": CRC error 0x%x != 0x%x 0x%x\n", crc, buf[buflen - 1],
+		       buf[buflen - 2]);
+
+		pr_info(DRIVER_DESC ": %s : BAD CRC\n", __func__);
+		print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE,
+			       16, 2, buf, buflen, false);
+		return -EPERM;
+	}
+	return 0;
+}
+
+/*
+ * Prepare received data for upper layer.
+ * Received data include byte stuffing, crc and sof/eof
+ * which is not usable by hci part.
+ * returns:
+ * frame size without sof/eof, header and byte stuffing
+ * -EBADMSG : frame was incorrect and discarded
+ */
+static int st21nfca_hci_i2c_repack(struct sk_buff *skb)
+{
+	int i, j, r, size;
+
+	if (skb->len < 1 || (skb->len > 1 && skb->data[1] != 0))
+		return -EBADMSG;
+
+	size = get_frame_size(skb->data, skb->len);
+	if (size > 0) {
+		skb_trim(skb, size);
+		/* remove ST21NFCA byte stuffing for upper layer */
+		for (i = 1, j = 0; i < skb->len; i++) {
+			if (skb->data[i + j] ==
+					(u8) ST21NFCA_ESCAPE_BYTE_STUFFING) {
+				skb->data[i] = skb->data[i + j + 1]
+						| ST21NFCA_BYTE_STUFFING_MASK;
+				i++;
+				j++;
+			}
+			skb->data[i] = skb->data[i + j];
+		}
+		/* remove byte stuffing useless byte */
+		skb_trim(skb, i - j);
+		/* remove ST21NFCA_SOF_EOF from head */
+		skb_pull(skb, 1);
+
+		r = check_crc(skb->data, skb->len);
+		if (r != 0) {
+			i = 0;
+			return -EBADMSG;
+		}
+
+		/* remove headbyte */
+		skb_pull(skb, 1);
+		/* remove crc. Byte Stuffing is already removed here */
+		skb_trim(skb, skb->len - 2);
+		return skb->len;
+	}
+	return 0;
+}
+
+/*
+ * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees
+ * that i2c bus will be flushed and that next read will start on a new frame.
+ * returned skb contains only LLC header and payload.
+ * returns:
+ * frame size : if received frame is complete (find ST21NFCA_SOF_EOF at
+ * end of read)
+ * -EAGAIN : if received frame is incomplete (not find ST21NFCA_SOF_EOF
+ * at end of read)
+ * -EREMOTEIO : i2c read error (fatal)
+ * -EBADMSG : frame was incorrect and discarded
+ * (value returned from st21nfca_hci_i2c_repack)
+ * -EIO : if no ST21NFCA_SOF_EOF is found after reaching
+ * the read length end sequence
+ */
+static int st21nfca_hci_i2c_read(struct st21nfca_i2c_phy *phy,
+				 struct sk_buff *skb)
+{
+	int r, i;
+	u8 len;
+	u8 buf[ST21NFCA_HCI_LLC_MAX_PAYLOAD];
+	struct i2c_client *client = phy->i2c_dev;
+
+	if (phy->current_read_len < ARRAY_SIZE(len_seq)) {
+		len = len_seq[phy->current_read_len];
+
+		/*
+		 * Add retry mecanism
+		 * Operation on I2C interface may fail in case of operation on
+		 * RF or SWP interface
+		 */
+		r = 0;
+		mutex_lock(&phy->phy_lock);
+		for (i = 0; i < ARRAY_SIZE(wait_tab) && r <= 0; i++) {
+			r = i2c_master_recv(client, buf, len);
+			if (r < 0)
+				msleep(wait_tab[i]);
+		}
+		mutex_unlock(&phy->phy_lock);
+
+		if (r != len) {
+			phy->current_read_len = 0;
+			return -EREMOTEIO;
+		}
+
+		/*
+		 * The first read sequence does not start with SOF.
+		 * Data is corrupeted so we drop it.
+		 */
+		if (!phy->current_read_len && !IS_START_OF_FRAME(buf)) {
+			skb_trim(skb, 0);
+			phy->current_read_len = 0;
+			return -EIO;
+		} else if (phy->current_read_len && IS_START_OF_FRAME(buf)) {
+			/*
+			 * Previous frame transmission was interrupted and
+			 * the frame got repeated.
+			 * Received frame start with ST21NFCA_SOF_EOF + 00.
+			 */
+			skb_trim(skb, 0);
+			phy->current_read_len = 0;
+		}
+
+		skb_put_data(skb, buf, len);
+
+		if (skb->data[skb->len - 1] == ST21NFCA_SOF_EOF) {
+			phy->current_read_len = 0;
+			return st21nfca_hci_i2c_repack(skb);
+		}
+		phy->current_read_len++;
+		return -EAGAIN;
+	}
+	return -EIO;
+}
+
+/*
+ * Reads an shdlc frame from the chip. This is not as straightforward as it
+ * seems. The frame format is data-crc, and corruption can occur anywhere
+ * while transiting on i2c bus, such that we could read an invalid data.
+ * The tricky case is when we read a corrupted data or crc. We must detect
+ * this here in order to determine that data can be transmitted to the hci
+ * core. This is the reason why we check the crc here.
+ * The CLF will repeat a frame until we send a RR on that frame.
+ *
+ * On ST21NFCA, IRQ goes in idle when read starts. As no size information are
+ * available in the incoming data, other IRQ might come. Every IRQ will trigger
+ * a read sequence with different length and will fill the current frame.
+ * The reception is complete once we reach a ST21NFCA_SOF_EOF.
+ */
+static irqreturn_t st21nfca_hci_irq_thread_fn(int irq, void *phy_id)
+{
+	struct st21nfca_i2c_phy *phy = phy_id;
+	struct i2c_client *client;
+
+	int r;
+
+	if (!phy || irq != phy->i2c_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	client = phy->i2c_dev;
+	dev_dbg(&client->dev, "IRQ\n");
+
+	if (phy->hard_fault != 0)
+		return IRQ_HANDLED;
+
+	r = st21nfca_hci_i2c_read(phy, phy->pending_skb);
+	if (r == -EREMOTEIO) {
+		phy->hard_fault = r;
+
+		nfc_hci_recv_frame(phy->hdev, NULL);
+
+		return IRQ_HANDLED;
+	} else if (r == -EAGAIN || r == -EIO) {
+		return IRQ_HANDLED;
+	} else if (r == -EBADMSG && phy->crc_trials < ARRAY_SIZE(wait_tab)) {
+		/*
+		 * With ST21NFCA, only one interface (I2C, RF or SWP)
+		 * may be active at a time.
+		 * Having incorrect crc is usually due to i2c macrocell
+		 * deactivation in the middle of a transmission.
+		 * It may generate corrupted data on i2c.
+		 * We give sometime to get i2c back.
+		 * The complete frame will be repeated.
+		 */
+		msleep(wait_tab[phy->crc_trials]);
+		phy->crc_trials++;
+		phy->current_read_len = 0;
+		kfree_skb(phy->pending_skb);
+	} else if (r > 0) {
+		/*
+		 * We succeeded to read data from the CLF and
+		 * data is valid.
+		 * Reset counter.
+		 */
+		nfc_hci_recv_frame(phy->hdev, phy->pending_skb);
+		phy->crc_trials = 0;
+	} else {
+		kfree_skb(phy->pending_skb);
+	}
+
+	phy->pending_skb = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE * 2, GFP_KERNEL);
+	if (phy->pending_skb == NULL) {
+		phy->hard_fault = -ENOMEM;
+		nfc_hci_recv_frame(phy->hdev, NULL);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct nfc_phy_ops i2c_phy_ops = {
+	.write = st21nfca_hci_i2c_write,
+	.enable = st21nfca_hci_i2c_enable,
+	.disable = st21nfca_hci_i2c_disable,
+};
+
+static const struct acpi_gpio_params enable_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_st21nfca_gpios[] = {
+	{ "enable-gpios", &enable_gpios, 1 },
+	{},
+};
+
+static int st21nfca_hci_i2c_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct st21nfca_i2c_phy *phy;
+	int r;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+	dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(&client->dev, sizeof(struct st21nfca_i2c_phy),
+			   GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->i2c_dev = client;
+	phy->pending_skb = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE * 2, GFP_KERNEL);
+	if (phy->pending_skb == NULL)
+		return -ENOMEM;
+
+	phy->current_read_len = 0;
+	phy->crc_trials = 0;
+	mutex_init(&phy->phy_lock);
+	i2c_set_clientdata(client, phy);
+
+	r = devm_acpi_dev_add_driver_gpios(dev, acpi_st21nfca_gpios);
+	if (r)
+		dev_dbg(dev, "Unable to add GPIO mapping table\n");
+
+	/* Get EN GPIO from resource provider */
+	phy->gpiod_ena = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(phy->gpiod_ena)) {
+		nfc_err(dev, "Unable to get ENABLE GPIO\n");
+		r = PTR_ERR(phy->gpiod_ena);
+		goto out_free;
+	}
+
+	phy->se_status.is_ese_present =
+			device_property_read_bool(&client->dev, "ese-present");
+	phy->se_status.is_uicc_present =
+			device_property_read_bool(&client->dev, "uicc-present");
+
+	r = st21nfca_hci_platform_init(phy);
+	if (r < 0) {
+		nfc_err(&client->dev, "Unable to reboot st21nfca\n");
+		goto out_free;
+	}
+
+	r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+				st21nfca_hci_irq_thread_fn,
+				IRQF_ONESHOT,
+				ST21NFCA_HCI_DRIVER_NAME, phy);
+	if (r < 0) {
+		nfc_err(&client->dev, "Unable to register IRQ handler\n");
+		goto out_free;
+	}
+
+	r = st21nfca_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
+			       ST21NFCA_FRAME_HEADROOM,
+			       ST21NFCA_FRAME_TAILROOM,
+			       ST21NFCA_HCI_LLC_MAX_PAYLOAD,
+			       &phy->hdev,
+			       &phy->se_status);
+	if (r)
+		goto out_free;
+
+	return 0;
+
+out_free:
+	kfree_skb(phy->pending_skb);
+	return r;
+}
+
+static int st21nfca_hci_i2c_remove(struct i2c_client *client)
+{
+	struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	st21nfca_hci_remove(phy->hdev);
+
+	if (phy->powered)
+		st21nfca_hci_i2c_disable(phy);
+	if (phy->pending_skb)
+		kfree_skb(phy->pending_skb);
+
+	return 0;
+}
+
+static const struct i2c_device_id st21nfca_hci_i2c_id_table[] = {
+	{ST21NFCA_HCI_DRIVER_NAME, 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, st21nfca_hci_i2c_id_table);
+
+static const struct acpi_device_id st21nfca_hci_i2c_acpi_match[] = {
+	{"SMO2100", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, st21nfca_hci_i2c_acpi_match);
+
+static const struct of_device_id of_st21nfca_i2c_match[] = {
+	{ .compatible = "st,st21nfca-i2c", },
+	{ .compatible = "st,st21nfca_i2c", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_st21nfca_i2c_match);
+
+static struct i2c_driver st21nfca_hci_i2c_driver = {
+	.driver = {
+		.name = ST21NFCA_HCI_I2C_DRIVER_NAME,
+		.of_match_table = of_match_ptr(of_st21nfca_i2c_match),
+		.acpi_match_table = ACPI_PTR(st21nfca_hci_i2c_acpi_match),
+	},
+	.probe = st21nfca_hci_i2c_probe,
+	.id_table = st21nfca_hci_i2c_id_table,
+	.remove = st21nfca_hci_i2c_remove,
+};
+module_i2c_driver(st21nfca_hci_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/st21nfca/se.c b/drivers/nfc/st21nfca/se.c
new file mode 100644
index 000000000..52e209950
--- /dev/null
+++ b/drivers/nfc/st21nfca/se.c
@@ -0,0 +1,456 @@
+/*
+ * Copyright (C) 2014  STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <net/nfc/hci.h>
+
+#include "st21nfca.h"
+
+#define ST21NFCA_EVT_UICC_ACTIVATE		0x10
+#define ST21NFCA_EVT_UICC_DEACTIVATE		0x13
+#define ST21NFCA_EVT_SE_HARD_RESET		0x20
+#define ST21NFCA_EVT_SE_SOFT_RESET		0x11
+#define ST21NFCA_EVT_SE_END_OF_APDU_TRANSFER	0x21
+#define ST21NFCA_EVT_SE_ACTIVATE		0x22
+#define ST21NFCA_EVT_SE_DEACTIVATE		0x23
+
+#define ST21NFCA_EVT_TRANSMIT_DATA		0x10
+#define ST21NFCA_EVT_WTX_REQUEST		0x11
+
+#define ST21NFCA_EVT_CONNECTIVITY		0x10
+#define ST21NFCA_EVT_TRANSACTION		0x12
+
+#define ST21NFCA_SE_TO_HOT_PLUG			1000
+/* Connectivity pipe only */
+#define ST21NFCA_SE_COUNT_PIPE_UICC		0x01
+/* Connectivity + APDU Reader pipe */
+#define ST21NFCA_SE_COUNT_PIPE_EMBEDDED	0x02
+
+#define ST21NFCA_SE_MODE_OFF			0x00
+#define ST21NFCA_SE_MODE_ON				0x01
+
+#define ST21NFCA_PARAM_ATR				0x01
+#define ST21NFCA_ATR_DEFAULT_BWI		0x04
+
+/*
+ * WT = 2^BWI/10[s], convert into msecs and add a secure
+ * room by increasing by 2 this timeout
+ */
+#define ST21NFCA_BWI_TO_TIMEOUT(x)		((1 << x) * 200)
+#define ST21NFCA_ATR_GET_Y_FROM_TD(x)	(x >> 4)
+
+/* If TA is present bit 0 is set */
+#define ST21NFCA_ATR_TA_PRESENT(x) (x & 0x01)
+/* If TB is present bit 1 is set */
+#define ST21NFCA_ATR_TB_PRESENT(x) (x & 0x02)
+
+static u8 st21nfca_se_get_bwi(struct nfc_hci_dev *hdev)
+{
+	int i;
+	u8 td;
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	/* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */
+	for (i = 1; i < ST21NFCA_ESE_MAX_LENGTH; i++) {
+		td = ST21NFCA_ATR_GET_Y_FROM_TD(info->se_info.atr[i]);
+		if (ST21NFCA_ATR_TA_PRESENT(td))
+			i++;
+		if (ST21NFCA_ATR_TB_PRESENT(td)) {
+			i++;
+			return info->se_info.atr[i] >> 4;
+		}
+	}
+	return ST21NFCA_ATR_DEFAULT_BWI;
+}
+
+static void st21nfca_se_get_atr(struct nfc_hci_dev *hdev)
+{
+	int r;
+	struct sk_buff *skb;
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	r = nfc_hci_get_param(hdev, ST21NFCA_APDU_READER_GATE,
+			ST21NFCA_PARAM_ATR, &skb);
+	if (r < 0)
+		return;
+
+	if (skb->len <= ST21NFCA_ESE_MAX_LENGTH) {
+		memcpy(info->se_info.atr, skb->data, skb->len);
+		info->se_info.wt_timeout =
+			ST21NFCA_BWI_TO_TIMEOUT(st21nfca_se_get_bwi(hdev));
+	}
+	kfree_skb(skb);
+}
+
+static int st21nfca_hci_control_se(struct nfc_hci_dev *hdev, u32 se_idx,
+				u8 state)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+	int r, i;
+	struct sk_buff *sk_host_list;
+	u8 se_event, host_id;
+
+	switch (se_idx) {
+	case NFC_HCI_UICC_HOST_ID:
+		se_event = (state == ST21NFCA_SE_MODE_ON ?
+					ST21NFCA_EVT_UICC_ACTIVATE :
+					ST21NFCA_EVT_UICC_DEACTIVATE);
+
+		info->se_info.count_pipes = 0;
+		info->se_info.expected_pipes = ST21NFCA_SE_COUNT_PIPE_UICC;
+		break;
+	case ST21NFCA_ESE_HOST_ID:
+		se_event = (state == ST21NFCA_SE_MODE_ON ?
+					ST21NFCA_EVT_SE_ACTIVATE :
+					ST21NFCA_EVT_SE_DEACTIVATE);
+
+		info->se_info.count_pipes = 0;
+		info->se_info.expected_pipes = ST21NFCA_SE_COUNT_PIPE_EMBEDDED;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Wait for an EVT_HOT_PLUG in order to
+	 * retrieve a relevant host list.
+	 */
+	reinit_completion(&info->se_info.req_completion);
+	r = nfc_hci_send_event(hdev, ST21NFCA_DEVICE_MGNT_GATE, se_event,
+			       NULL, 0);
+	if (r < 0)
+		return r;
+
+	mod_timer(&info->se_info.se_active_timer, jiffies +
+		msecs_to_jiffies(ST21NFCA_SE_TO_HOT_PLUG));
+	info->se_info.se_active = true;
+
+	/* Ignore return value and check in any case the host_list */
+	wait_for_completion_interruptible(&info->se_info.req_completion);
+
+	r = nfc_hci_get_param(hdev, NFC_HCI_ADMIN_GATE,
+			NFC_HCI_ADMIN_HOST_LIST,
+			&sk_host_list);
+	if (r < 0)
+		return r;
+
+	for (i = 0; i < sk_host_list->len &&
+		sk_host_list->data[i] != se_idx; i++)
+		;
+	host_id = sk_host_list->data[i];
+	kfree_skb(sk_host_list);
+
+	if (state == ST21NFCA_SE_MODE_ON && host_id == se_idx)
+		return se_idx;
+	else if (state == ST21NFCA_SE_MODE_OFF && host_id != se_idx)
+		return se_idx;
+
+	return -1;
+}
+
+int st21nfca_hci_discover_se(struct nfc_hci_dev *hdev)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+	int se_count = 0;
+
+	if (test_bit(ST21NFCA_FACTORY_MODE, &hdev->quirks))
+		return 0;
+
+	if (info->se_status->is_uicc_present) {
+		nfc_add_se(hdev->ndev, NFC_HCI_UICC_HOST_ID, NFC_SE_UICC);
+		se_count++;
+	}
+
+	if (info->se_status->is_ese_present) {
+		nfc_add_se(hdev->ndev, ST21NFCA_ESE_HOST_ID, NFC_SE_EMBEDDED);
+		se_count++;
+	}
+
+	return !se_count;
+}
+EXPORT_SYMBOL(st21nfca_hci_discover_se);
+
+int st21nfca_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx)
+{
+	int r;
+
+	/*
+	 * According to upper layer, se_idx == NFC_SE_UICC when
+	 * info->se_status->is_uicc_enable is true should never happen.
+	 * Same for eSE.
+	 */
+	r = st21nfca_hci_control_se(hdev, se_idx, ST21NFCA_SE_MODE_ON);
+	if (r == ST21NFCA_ESE_HOST_ID) {
+		st21nfca_se_get_atr(hdev);
+		r = nfc_hci_send_event(hdev, ST21NFCA_APDU_READER_GATE,
+				ST21NFCA_EVT_SE_SOFT_RESET, NULL, 0);
+		if (r < 0)
+			return r;
+	} else if (r < 0) {
+		/*
+		 * The activation tentative failed, the secure element
+		 * is not connected. Remove from the list.
+		 */
+		nfc_remove_se(hdev->ndev, se_idx);
+		return r;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(st21nfca_hci_enable_se);
+
+int st21nfca_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx)
+{
+	int r;
+
+	/*
+	 * According to upper layer, se_idx == NFC_SE_UICC when
+	 * info->se_status->is_uicc_enable is true should never happen
+	 * Same for eSE.
+	 */
+	r = st21nfca_hci_control_se(hdev, se_idx, ST21NFCA_SE_MODE_OFF);
+	if (r < 0)
+		return r;
+
+	return 0;
+}
+EXPORT_SYMBOL(st21nfca_hci_disable_se);
+
+int st21nfca_hci_se_io(struct nfc_hci_dev *hdev, u32 se_idx,
+			u8 *apdu, size_t apdu_length,
+			se_io_cb_t cb, void *cb_context)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	pr_debug("se_io %x\n", se_idx);
+
+	switch (se_idx) {
+	case ST21NFCA_ESE_HOST_ID:
+		info->se_info.cb = cb;
+		info->se_info.cb_context = cb_context;
+		mod_timer(&info->se_info.bwi_timer, jiffies +
+			  msecs_to_jiffies(info->se_info.wt_timeout));
+		info->se_info.bwi_active = true;
+		return nfc_hci_send_event(hdev, ST21NFCA_APDU_READER_GATE,
+					ST21NFCA_EVT_TRANSMIT_DATA,
+					apdu, apdu_length);
+	default:
+		return -ENODEV;
+	}
+}
+EXPORT_SYMBOL(st21nfca_hci_se_io);
+
+static void st21nfca_se_wt_work(struct work_struct *work)
+{
+	/*
+	 * No answer from the secure element
+	 * within the defined timeout.
+	 * Let's send a reset request as recovery procedure.
+	 * According to the situation, we first try to send a software reset
+	 * to the secure element. If the next command is still not
+	 * answering in time, we send to the CLF a secure element hardware
+	 * reset request.
+	 */
+	/* hardware reset managed through VCC_UICC_OUT power supply */
+	u8 param = 0x01;
+	struct st21nfca_hci_info *info = container_of(work,
+						struct st21nfca_hci_info,
+						se_info.timeout_work);
+
+	pr_debug("\n");
+
+	info->se_info.bwi_active = false;
+
+	if (!info->se_info.xch_error) {
+		info->se_info.xch_error = true;
+		nfc_hci_send_event(info->hdev, ST21NFCA_APDU_READER_GATE,
+				ST21NFCA_EVT_SE_SOFT_RESET, NULL, 0);
+	} else {
+		info->se_info.xch_error = false;
+		nfc_hci_send_event(info->hdev, ST21NFCA_DEVICE_MGNT_GATE,
+				ST21NFCA_EVT_SE_HARD_RESET, &param, 1);
+	}
+	info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME);
+}
+
+static void st21nfca_se_wt_timeout(struct timer_list *t)
+{
+	struct st21nfca_hci_info *info = from_timer(info, t, se_info.bwi_timer);
+
+	schedule_work(&info->se_info.timeout_work);
+}
+
+static void st21nfca_se_activation_timeout(struct timer_list *t)
+{
+	struct st21nfca_hci_info *info = from_timer(info, t,
+						    se_info.se_active_timer);
+
+	pr_debug("\n");
+
+	info->se_info.se_active = false;
+
+	complete(&info->se_info.req_completion);
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the event, skb consumed
+ *    1: driver does not handle the event, please do standard processing
+ */
+int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host,
+				u8 event, struct sk_buff *skb)
+{
+	int r = 0;
+	struct device *dev = &hdev->ndev->dev;
+	struct nfc_evt_transaction *transaction;
+
+	pr_debug("connectivity gate event: %x\n", event);
+
+	switch (event) {
+	case ST21NFCA_EVT_CONNECTIVITY:
+		r = nfc_se_connectivity(hdev->ndev, host);
+	break;
+	case ST21NFCA_EVT_TRANSACTION:
+		/*
+		 * According to specification etsi 102 622
+		 * 11.2.2.4 EVT_TRANSACTION Table 52
+		 * Description	Tag	Length
+		 * AID		81	5 to 16
+		 * PARAMETERS	82	0 to 255
+		 */
+		if (skb->len < NFC_MIN_AID_LENGTH + 2 ||
+		    skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG)
+			return -EPROTO;
+
+		transaction = (struct nfc_evt_transaction *)devm_kzalloc(dev,
+						   skb->len - 2, GFP_KERNEL);
+		if (!transaction)
+			return -ENOMEM;
+
+		transaction->aid_len = skb->data[1];
+
+		/* Checking if the length of the AID is valid */
+		if (transaction->aid_len > sizeof(transaction->aid)) {
+			devm_kfree(dev, transaction);
+			return -EINVAL;
+		}
+
+		memcpy(transaction->aid, &skb->data[2],
+		       transaction->aid_len);
+
+		/* Check next byte is PARAMETERS tag (82) */
+		if (skb->data[transaction->aid_len + 2] !=
+		    NFC_EVT_TRANSACTION_PARAMS_TAG) {
+			devm_kfree(dev, transaction);
+			return -EPROTO;
+		}
+
+		transaction->params_len = skb->data[transaction->aid_len + 3];
+
+		/* Total size is allocated (skb->len - 2) minus fixed array members */
+		if (transaction->params_len > ((skb->len - 2) -
+		    sizeof(struct nfc_evt_transaction))) {
+			devm_kfree(dev, transaction);
+			return -EINVAL;
+		}
+
+		memcpy(transaction->params, skb->data +
+		       transaction->aid_len + 4, transaction->params_len);
+
+		r = nfc_se_transaction(hdev->ndev, host, transaction);
+	break;
+	default:
+		nfc_err(&hdev->ndev->dev, "Unexpected event on connectivity gate\n");
+		return 1;
+	}
+	kfree_skb(skb);
+	return r;
+}
+EXPORT_SYMBOL(st21nfca_connectivity_event_received);
+
+int st21nfca_apdu_reader_event_received(struct nfc_hci_dev *hdev,
+					u8 event, struct sk_buff *skb)
+{
+	int r = 0;
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	pr_debug("apdu reader gate event: %x\n", event);
+
+	switch (event) {
+	case ST21NFCA_EVT_TRANSMIT_DATA:
+		del_timer_sync(&info->se_info.bwi_timer);
+		cancel_work_sync(&info->se_info.timeout_work);
+		info->se_info.bwi_active = false;
+		r = nfc_hci_send_event(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+				ST21NFCA_EVT_SE_END_OF_APDU_TRANSFER, NULL, 0);
+		if (r < 0)
+			goto exit;
+
+		info->se_info.cb(info->se_info.cb_context,
+			skb->data, skb->len, 0);
+		break;
+	case ST21NFCA_EVT_WTX_REQUEST:
+		mod_timer(&info->se_info.bwi_timer, jiffies +
+				msecs_to_jiffies(info->se_info.wt_timeout));
+		break;
+	default:
+		nfc_err(&hdev->ndev->dev, "Unexpected event on apdu reader gate\n");
+		return 1;
+	}
+
+exit:
+	kfree_skb(skb);
+	return r;
+}
+EXPORT_SYMBOL(st21nfca_apdu_reader_event_received);
+
+void st21nfca_se_init(struct nfc_hci_dev *hdev)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	init_completion(&info->se_info.req_completion);
+	INIT_WORK(&info->se_info.timeout_work, st21nfca_se_wt_work);
+	/* initialize timers */
+	timer_setup(&info->se_info.bwi_timer, st21nfca_se_wt_timeout, 0);
+	info->se_info.bwi_active = false;
+
+	timer_setup(&info->se_info.se_active_timer,
+		    st21nfca_se_activation_timeout, 0);
+	info->se_info.se_active = false;
+
+	info->se_info.count_pipes = 0;
+	info->se_info.expected_pipes = 0;
+
+	info->se_info.xch_error = false;
+
+	info->se_info.wt_timeout =
+			ST21NFCA_BWI_TO_TIMEOUT(ST21NFCA_ATR_DEFAULT_BWI);
+}
+EXPORT_SYMBOL(st21nfca_se_init);
+
+void st21nfca_se_deinit(struct nfc_hci_dev *hdev)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	if (info->se_info.bwi_active)
+		del_timer_sync(&info->se_info.bwi_timer);
+	if (info->se_info.se_active)
+		del_timer_sync(&info->se_info.se_active_timer);
+
+	cancel_work_sync(&info->se_info.timeout_work);
+	info->se_info.bwi_active = false;
+	info->se_info.se_active = false;
+}
+EXPORT_SYMBOL(st21nfca_se_deinit);
diff --git a/drivers/nfc/st21nfca/st21nfca.h b/drivers/nfc/st21nfca/st21nfca.h
new file mode 100644
index 000000000..7e2923ac9
--- /dev/null
+++ b/drivers/nfc/st21nfca/st21nfca.h
@@ -0,0 +1,212 @@
+/*
+ * Copyright (C) 2014  STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_ST21NFCA_H_
+#define __LOCAL_ST21NFCA_H_
+
+#include <net/nfc/hci.h>
+#include <linux/skbuff.h>
+#include <linux/workqueue.h>
+
+#define HCI_MODE 0
+
+/* framing in HCI mode */
+#define ST21NFCA_SOF_EOF_LEN    2
+
+/* Almost every time value is 0 */
+#define ST21NFCA_HCI_LLC_LEN    1
+
+/* Size in worst case :
+ * In normal case CRC len = 2 but byte stuffing
+ * may appear in case one CRC byte = ST21NFCA_SOF_EOF
+ */
+#define ST21NFCA_HCI_LLC_CRC    4
+
+#define ST21NFCA_HCI_LLC_LEN_CRC        (ST21NFCA_SOF_EOF_LEN + \
+						ST21NFCA_HCI_LLC_LEN + \
+						ST21NFCA_HCI_LLC_CRC)
+#define ST21NFCA_HCI_LLC_MIN_SIZE       (1 + ST21NFCA_HCI_LLC_LEN_CRC)
+
+/* Worst case when adding byte stuffing between each byte */
+#define ST21NFCA_HCI_LLC_MAX_PAYLOAD    29
+#define ST21NFCA_HCI_LLC_MAX_SIZE       (ST21NFCA_HCI_LLC_LEN_CRC + 1 + \
+					ST21NFCA_HCI_LLC_MAX_PAYLOAD)
+
+/* Reader RF commands */
+#define ST21NFCA_WR_XCHG_DATA           0x10
+
+#define ST21NFCA_DEVICE_MGNT_GATE       0x01
+#define ST21NFCA_RF_READER_F_GATE       0x14
+#define ST21NFCA_RF_CARD_F_GATE		0x24
+#define ST21NFCA_APDU_READER_GATE	0xf0
+#define ST21NFCA_CONNECTIVITY_GATE	0x41
+
+/*
+ * ref ISO7816-3 chap 8.1. the initial character TS is followed by a
+ * sequence of at most 32 characters.
+ */
+#define ST21NFCA_ESE_MAX_LENGTH		33
+#define ST21NFCA_ESE_HOST_ID		0xc0
+
+#define DRIVER_DESC "HCI NFC driver for ST21NFCA"
+
+#define ST21NFCA_HCI_MODE		0
+#define ST21NFCA_NUM_DEVICES		256
+
+#define ST21NFCA_VENDOR_OUI		0x0080E1 /* STMicroelectronics */
+#define ST21NFCA_FACTORY_MODE		2
+
+struct st21nfca_se_status {
+	bool is_ese_present;
+	bool is_uicc_present;
+};
+
+enum st21nfca_state {
+	ST21NFCA_ST_COLD,
+	ST21NFCA_ST_READY,
+};
+
+/**
+ * enum nfc_vendor_cmds - supported nfc vendor commands
+ *
+ * @FACTORY_MODE: Allow to set the driver into a mode where no secure element
+ *	are activated. It does not consider any NFC_ATTR_VENDOR_DATA.
+ * @HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command.
+ *	It does not consider any NFC_ATTR_VENDOR_DATA.
+ * @HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example
+ *	RF trimmings or low level drivers configurations (I2C, SPI, SWP).
+ * @HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing
+ *	table following RF technology, CLF mode or protocol.
+ * @HCI_DM_GET_INFO: Allow to retrieve CLF information.
+ * @HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low
+ *	level drivers configurations or RF trimmings.
+ * @HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete
+ *	packet can be more than 8KB.
+ * @HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF
+ *	configuration changes without CLF power off.
+ * @HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the
+ *	white list).
+ * @HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF
+ *	technology. When using this command to anti-collision is done.
+ * @HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF
+ *	connectivity.
+ */
+enum nfc_vendor_cmds {
+	FACTORY_MODE,
+	HCI_CLEAR_ALL_PIPES,
+	HCI_DM_PUT_DATA,
+	HCI_DM_UPDATE_AID,
+	HCI_DM_GET_INFO,
+	HCI_DM_GET_DATA,
+	HCI_DM_LOAD,
+	HCI_DM_RESET,
+	HCI_GET_PARAM,
+	HCI_DM_FIELD_GENERATOR,
+	HCI_LOOPBACK,
+};
+
+struct st21nfca_vendor_info {
+	struct completion req_completion;
+	struct sk_buff *rx_skb;
+};
+
+struct st21nfca_dep_info {
+	struct sk_buff *tx_pending;
+	struct work_struct tx_work;
+	u8 curr_nfc_dep_pni;
+	u32 idx;
+	u8 to;
+	u8 did;
+	u8 bsi;
+	u8 bri;
+	u8 lri;
+} __packed;
+
+struct st21nfca_se_info {
+	u8 atr[ST21NFCA_ESE_MAX_LENGTH];
+	struct completion req_completion;
+
+	struct timer_list bwi_timer;
+	int wt_timeout; /* in msecs */
+	bool bwi_active;
+
+	struct timer_list se_active_timer;
+	bool se_active;
+	int expected_pipes;
+	int count_pipes;
+
+	bool xch_error;
+
+	se_io_cb_t cb;
+	void *cb_context;
+	struct work_struct timeout_work;
+};
+
+struct st21nfca_hci_info {
+	struct nfc_phy_ops *phy_ops;
+	void *phy_id;
+
+	struct nfc_hci_dev *hdev;
+	struct st21nfca_se_status *se_status;
+
+	enum st21nfca_state state;
+
+	struct mutex info_lock;
+
+	int async_cb_type;
+	data_exchange_cb_t async_cb;
+	void *async_cb_context;
+
+	struct st21nfca_dep_info dep_info;
+	struct st21nfca_se_info se_info;
+	struct st21nfca_vendor_info vendor_info;
+};
+
+int st21nfca_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops,
+		       char *llc_name, int phy_headroom, int phy_tailroom,
+		       int phy_payload, struct nfc_hci_dev **hdev,
+		       struct st21nfca_se_status *se_status);
+void st21nfca_hci_remove(struct nfc_hci_dev *hdev);
+
+int st21nfca_dep_event_received(struct nfc_hci_dev *hdev,
+				u8 event, struct sk_buff *skb);
+int st21nfca_tm_send_dep_res(struct nfc_hci_dev *hdev, struct sk_buff *skb);
+
+int st21nfca_im_send_atr_req(struct nfc_hci_dev *hdev, u8 *gb, size_t gb_len);
+int st21nfca_im_send_dep_req(struct nfc_hci_dev *hdev, struct sk_buff *skb);
+void st21nfca_dep_init(struct nfc_hci_dev *hdev);
+void st21nfca_dep_deinit(struct nfc_hci_dev *hdev);
+
+int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host,
+					u8 event, struct sk_buff *skb);
+int st21nfca_apdu_reader_event_received(struct nfc_hci_dev *hdev,
+					u8 event, struct sk_buff *skb);
+
+int st21nfca_hci_discover_se(struct nfc_hci_dev *hdev);
+int st21nfca_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx);
+int st21nfca_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx);
+int st21nfca_hci_se_io(struct nfc_hci_dev *hdev, u32 se_idx,
+		u8 *apdu, size_t apdu_length,
+		se_io_cb_t cb, void *cb_context);
+
+void st21nfca_se_init(struct nfc_hci_dev *hdev);
+void st21nfca_se_deinit(struct nfc_hci_dev *hdev);
+
+int st21nfca_hci_loopback_event_received(struct nfc_hci_dev *ndev, u8 event,
+					 struct sk_buff *skb);
+int st21nfca_vendor_cmds_init(struct nfc_hci_dev *ndev);
+
+#endif /* __LOCAL_ST21NFCA_H_ */
diff --git a/drivers/nfc/st21nfca/vendor_cmds.c b/drivers/nfc/st21nfca/vendor_cmds.c
new file mode 100644
index 000000000..ab765e547
--- /dev/null
+++ b/drivers/nfc/st21nfca/vendor_cmds.c
@@ -0,0 +1,375 @@
+/*
+ * Proprietary commands extension for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014-2015  STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <net/genetlink.h>
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "st21nfca.h"
+
+#define ST21NFCA_HCI_DM_GETDATA			0x10
+#define ST21NFCA_HCI_DM_PUTDATA			0x11
+#define ST21NFCA_HCI_DM_LOAD			0x12
+#define ST21NFCA_HCI_DM_GETINFO			0x13
+#define ST21NFCA_HCI_DM_UPDATE_AID		0x20
+#define ST21NFCA_HCI_DM_RESET			0x3e
+
+#define ST21NFCA_HCI_DM_FIELD_GENERATOR		0x32
+
+#define ST21NFCA_FACTORY_MODE_ON		1
+#define ST21NFCA_FACTORY_MODE_OFF		0
+
+#define ST21NFCA_EVT_POST_DATA			0x02
+
+struct get_param_data {
+	u8 gate;
+	u8 data;
+} __packed;
+
+static int st21nfca_factory_mode(struct nfc_dev *dev, void *data,
+			       size_t data_len)
+{
+	struct nfc_hci_dev *hdev = nfc_get_drvdata(dev);
+
+	if (data_len != 1)
+		return -EINVAL;
+
+	pr_debug("factory mode: %x\n", ((u8 *)data)[0]);
+
+	switch (((u8 *)data)[0]) {
+	case ST21NFCA_FACTORY_MODE_ON:
+		test_and_set_bit(ST21NFCA_FACTORY_MODE, &hdev->quirks);
+	break;
+	case ST21NFCA_FACTORY_MODE_OFF:
+		clear_bit(ST21NFCA_FACTORY_MODE, &hdev->quirks);
+	break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int st21nfca_hci_clear_all_pipes(struct nfc_dev *dev, void *data,
+				      size_t data_len)
+{
+	struct nfc_hci_dev *hdev = nfc_get_drvdata(dev);
+
+	return nfc_hci_disconnect_all_gates(hdev);
+}
+
+static int st21nfca_hci_dm_put_data(struct nfc_dev *dev, void *data,
+				  size_t data_len)
+{
+	struct nfc_hci_dev *hdev = nfc_get_drvdata(dev);
+
+	return nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+				ST21NFCA_HCI_DM_PUTDATA, data,
+				data_len, NULL);
+}
+
+static int st21nfca_hci_dm_update_aid(struct nfc_dev *dev, void *data,
+				    size_t data_len)
+{
+	struct nfc_hci_dev *hdev = nfc_get_drvdata(dev);
+
+	return nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+			ST21NFCA_HCI_DM_UPDATE_AID, data, data_len, NULL);
+}
+
+static int st21nfca_hci_dm_get_info(struct nfc_dev *dev, void *data,
+				    size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nfc_hci_dev *hdev = nfc_get_drvdata(dev);
+
+	r = nfc_hci_send_cmd(hdev,
+			     ST21NFCA_DEVICE_MGNT_GATE,
+			     ST21NFCA_HCI_DM_GETINFO,
+			     data, data_len, &skb);
+	if (r)
+		goto exit;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST21NFCA_VENDOR_OUI,
+					     HCI_DM_GET_INFO, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+exit:
+	return r;
+}
+
+static int st21nfca_hci_dm_get_data(struct nfc_dev *dev, void *data,
+				    size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nfc_hci_dev *hdev = nfc_get_drvdata(dev);
+
+	r = nfc_hci_send_cmd(hdev,
+			     ST21NFCA_DEVICE_MGNT_GATE,
+			     ST21NFCA_HCI_DM_GETDATA,
+			     data, data_len, &skb);
+	if (r)
+		goto exit;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST21NFCA_VENDOR_OUI,
+					     HCI_DM_GET_DATA, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+exit:
+	return r;
+}
+
+static int st21nfca_hci_dm_load(struct nfc_dev *dev, void *data,
+				size_t data_len)
+{
+	struct nfc_hci_dev *hdev = nfc_get_drvdata(dev);
+
+	return nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+				ST21NFCA_HCI_DM_LOAD, data, data_len, NULL);
+}
+
+static int st21nfca_hci_dm_reset(struct nfc_dev *dev, void *data,
+				 size_t data_len)
+{
+	int r;
+	struct nfc_hci_dev *hdev = nfc_get_drvdata(dev);
+
+	r = nfc_hci_send_cmd_async(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+			ST21NFCA_HCI_DM_RESET, data, data_len, NULL, NULL);
+	if (r < 0)
+		return r;
+
+	r = nfc_llc_stop(hdev->llc);
+	if (r < 0)
+		return r;
+
+	return nfc_llc_start(hdev->llc);
+}
+
+static int st21nfca_hci_get_param(struct nfc_dev *dev, void *data,
+				  size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nfc_hci_dev *hdev = nfc_get_drvdata(dev);
+	struct get_param_data *param = (struct get_param_data *)data;
+
+	if (data_len < sizeof(struct get_param_data))
+		return -EPROTO;
+
+	r = nfc_hci_get_param(hdev, param->gate, param->data, &skb);
+	if (r)
+		goto exit;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST21NFCA_VENDOR_OUI,
+					     HCI_GET_PARAM, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+exit:
+	return r;
+}
+
+static int st21nfca_hci_dm_field_generator(struct nfc_dev *dev, void *data,
+					   size_t data_len)
+{
+	struct nfc_hci_dev *hdev = nfc_get_drvdata(dev);
+
+	return nfc_hci_send_cmd(hdev,
+				ST21NFCA_DEVICE_MGNT_GATE,
+				ST21NFCA_HCI_DM_FIELD_GENERATOR,
+				data, data_len, NULL);
+}
+
+int st21nfca_hci_loopback_event_received(struct nfc_hci_dev *hdev, u8 event,
+					 struct sk_buff *skb)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	switch (event) {
+	case ST21NFCA_EVT_POST_DATA:
+		info->vendor_info.rx_skb = skb;
+	break;
+	default:
+		nfc_err(&hdev->ndev->dev, "Unexpected event on loopback gate\n");
+	}
+	complete(&info->vendor_info.req_completion);
+	return 0;
+}
+EXPORT_SYMBOL(st21nfca_hci_loopback_event_received);
+
+static int st21nfca_hci_loopback(struct nfc_dev *dev, void *data,
+				 size_t data_len)
+{
+	int r;
+	struct sk_buff *msg;
+	struct nfc_hci_dev *hdev = nfc_get_drvdata(dev);
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	if (data_len <= 0)
+		return -EPROTO;
+
+	reinit_completion(&info->vendor_info.req_completion);
+	info->vendor_info.rx_skb = NULL;
+
+	r = nfc_hci_send_event(hdev, NFC_HCI_LOOPBACK_GATE,
+			       ST21NFCA_EVT_POST_DATA, data, data_len);
+	if (r < 0) {
+		r = -EPROTO;
+		goto exit;
+	}
+
+	wait_for_completion_interruptible(&info->vendor_info.req_completion);
+	if (!info->vendor_info.rx_skb ||
+	    info->vendor_info.rx_skb->len != data_len) {
+		r = -EPROTO;
+		goto exit;
+	}
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(hdev->ndev,
+					ST21NFCA_VENDOR_OUI,
+					HCI_LOOPBACK,
+					info->vendor_info.rx_skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, info->vendor_info.rx_skb->len,
+		    info->vendor_info.rx_skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+free_skb:
+	kfree_skb(info->vendor_info.rx_skb);
+exit:
+	return r;
+}
+
+static struct nfc_vendor_cmd st21nfca_vendor_cmds[] = {
+	{
+		.vendor_id = ST21NFCA_VENDOR_OUI,
+		.subcmd = FACTORY_MODE,
+		.doit = st21nfca_factory_mode,
+	},
+	{
+		.vendor_id = ST21NFCA_VENDOR_OUI,
+		.subcmd = HCI_CLEAR_ALL_PIPES,
+		.doit = st21nfca_hci_clear_all_pipes,
+	},
+	{
+		.vendor_id = ST21NFCA_VENDOR_OUI,
+		.subcmd = HCI_DM_PUT_DATA,
+		.doit = st21nfca_hci_dm_put_data,
+	},
+	{
+		.vendor_id = ST21NFCA_VENDOR_OUI,
+		.subcmd = HCI_DM_UPDATE_AID,
+		.doit = st21nfca_hci_dm_update_aid,
+	},
+	{
+		.vendor_id = ST21NFCA_VENDOR_OUI,
+		.subcmd = HCI_DM_GET_INFO,
+		.doit = st21nfca_hci_dm_get_info,
+	},
+	{
+		.vendor_id = ST21NFCA_VENDOR_OUI,
+		.subcmd = HCI_DM_GET_DATA,
+		.doit = st21nfca_hci_dm_get_data,
+	},
+	{
+		.vendor_id = ST21NFCA_VENDOR_OUI,
+		.subcmd = HCI_DM_LOAD,
+		.doit = st21nfca_hci_dm_load,
+	},
+	{
+		.vendor_id = ST21NFCA_VENDOR_OUI,
+		.subcmd = HCI_DM_RESET,
+		.doit = st21nfca_hci_dm_reset,
+	},
+	{
+		.vendor_id = ST21NFCA_VENDOR_OUI,
+		.subcmd = HCI_GET_PARAM,
+		.doit = st21nfca_hci_get_param,
+	},
+	{
+		.vendor_id = ST21NFCA_VENDOR_OUI,
+		.subcmd = HCI_DM_FIELD_GENERATOR,
+		.doit = st21nfca_hci_dm_field_generator,
+	},
+	{
+		.vendor_id = ST21NFCA_VENDOR_OUI,
+		.subcmd = HCI_LOOPBACK,
+		.doit = st21nfca_hci_loopback,
+	},
+};
+
+int st21nfca_vendor_cmds_init(struct nfc_hci_dev *hdev)
+{
+	struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+	init_completion(&info->vendor_info.req_completion);
+	return nfc_set_vendor_cmds(hdev->ndev, st21nfca_vendor_cmds,
+				   sizeof(st21nfca_vendor_cmds));
+}
+EXPORT_SYMBOL(st21nfca_vendor_cmds_init);
diff --git a/drivers/nfc/st95hf/Kconfig b/drivers/nfc/st95hf/Kconfig
new file mode 100644
index 000000000..224f266fd
--- /dev/null
+++ b/drivers/nfc/st95hf/Kconfig
@@ -0,0 +1,10 @@
+config NFC_ST95HF
+	tristate "ST95HF NFC Transceiver driver"
+	depends on SPI && NFC_DIGITAL
+	help
+	This enables the ST NFC driver for ST95HF NFC transceiver.
+	This makes use of SPI framework to communicate with transceiver
+	and registered with NFC digital core to support Linux NFC framework.
+
+	Say Y here to compile support for ST NFC transceiver ST95HF
+	linux driver into the kernel or say M to compile it as module.
diff --git a/drivers/nfc/st95hf/Makefile b/drivers/nfc/st95hf/Makefile
new file mode 100644
index 000000000..00760b38a
--- /dev/null
+++ b/drivers/nfc/st95hf/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for STMicroelectronics NFC transceiver ST95HF
+#
+
+obj-$(CONFIG_NFC_ST95HF)	+= st95hf.o
+st95hf-objs			:= spi.o core.o
diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c
new file mode 100644
index 000000000..c4b6e29c0
--- /dev/null
+++ b/drivers/nfc/st95hf/core.c
@@ -0,0 +1,1280 @@
+/*
+ * --------------------------------------------------------------------
+ * Driver for ST NFC Transceiver ST95HF
+ * --------------------------------------------------------------------
+ * Copyright (C) 2015 STMicroelectronics Pvt. Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/nfc.h>
+#include <linux/of_gpio.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/wait.h>
+#include <net/nfc/digital.h>
+#include <net/nfc/nfc.h>
+
+#include "spi.h"
+
+/* supported protocols */
+#define ST95HF_SUPPORTED_PROT		(NFC_PROTO_ISO14443_MASK | \
+					NFC_PROTO_ISO14443_B_MASK | \
+					NFC_PROTO_ISO15693_MASK)
+/* driver capabilities */
+#define ST95HF_CAPABILITIES		NFC_DIGITAL_DRV_CAPS_IN_CRC
+
+/* Command Send Interface */
+/* ST95HF_COMMAND_SEND CMD Ids */
+#define ECHO_CMD			0x55
+#define WRITE_REGISTER_CMD		0x9
+#define PROTOCOL_SELECT_CMD		0x2
+#define SEND_RECEIVE_CMD		0x4
+
+/* Select protocol codes */
+#define ISO15693_PROTOCOL_CODE		0x1
+#define ISO14443A_PROTOCOL_CODE		0x2
+#define ISO14443B_PROTOCOL_CODE		0x3
+
+/*
+ * head room len is 3
+ * 1 byte for control byte
+ * 1 byte for cmd
+ * 1 byte for size
+ */
+#define ST95HF_HEADROOM_LEN		3
+
+/*
+ * tailroom is 1 for ISO14443A
+ * and 0 for ISO14443B/ISO15693,
+ * hence the max value 1 should be
+ * taken.
+ */
+#define ST95HF_TAILROOM_LEN		1
+
+/* Command Response interface */
+#define MAX_RESPONSE_BUFFER_SIZE	280
+#define ECHORESPONSE			0x55
+#define ST95HF_ERR_MASK			0xF
+#define ST95HF_TIMEOUT_ERROR		0x87
+#define ST95HF_NFCA_CRC_ERR_MASK	0x20
+#define ST95HF_NFCB_CRC_ERR_MASK	0x01
+
+/* ST95HF transmission flag values */
+#define TRFLAG_NFCA_SHORT_FRAME		0x07
+#define TRFLAG_NFCA_STD_FRAME		0x08
+#define TRFLAG_NFCA_STD_FRAME_CRC	0x28
+
+/* Misc defs */
+#define HIGH				1
+#define LOW				0
+#define ISO14443A_RATS_REQ		0xE0
+#define RATS_TB1_PRESENT_MASK		0x20
+#define RATS_TA1_PRESENT_MASK		0x10
+#define TB1_FWI_MASK			0xF0
+#define WTX_REQ_FROM_TAG		0xF2
+
+#define MAX_CMD_LEN			0x7
+
+#define MAX_CMD_PARAMS			4
+struct cmd {
+	int cmd_len;
+	unsigned char cmd_id;
+	unsigned char no_cmd_params;
+	unsigned char cmd_params[MAX_CMD_PARAMS];
+	enum req_type req;
+};
+
+struct param_list {
+	int param_offset;
+	int new_param_val;
+};
+
+/*
+ * List of top-level cmds to be used internally by the driver.
+ * All these commands are build on top of ST95HF basic commands
+ * such as SEND_RECEIVE_CMD, PROTOCOL_SELECT_CMD, etc.
+ * These top level cmds are used internally while implementing various ops of
+ * digital layer/driver probe or extending the digital framework layer for
+ * features that are not yet implemented there, for example, WTX cmd handling.
+ */
+enum st95hf_cmd_list {
+	CMD_ECHO,
+	CMD_ISO14443A_CONFIG,
+	CMD_ISO14443A_DEMOGAIN,
+	CMD_ISO14443B_DEMOGAIN,
+	CMD_ISO14443A_PROTOCOL_SELECT,
+	CMD_ISO14443B_PROTOCOL_SELECT,
+	CMD_WTX_RESPONSE,
+	CMD_FIELD_OFF,
+	CMD_ISO15693_PROTOCOL_SELECT,
+};
+
+static const struct cmd cmd_array[] = {
+	[CMD_ECHO] = {
+		.cmd_len = 0x2,
+		.cmd_id = ECHO_CMD,
+		.no_cmd_params = 0,
+		.req = SYNC,
+	},
+	[CMD_ISO14443A_CONFIG] = {
+		.cmd_len = 0x7,
+		.cmd_id = WRITE_REGISTER_CMD,
+		.no_cmd_params = 0x4,
+		.cmd_params = {0x3A, 0x00, 0x5A, 0x04},
+		.req = SYNC,
+	},
+	[CMD_ISO14443A_DEMOGAIN] = {
+		.cmd_len = 0x7,
+		.cmd_id = WRITE_REGISTER_CMD,
+		.no_cmd_params = 0x4,
+		.cmd_params = {0x68, 0x01, 0x01, 0xDF},
+		.req = SYNC,
+	},
+	[CMD_ISO14443B_DEMOGAIN] = {
+		.cmd_len = 0x7,
+		.cmd_id = WRITE_REGISTER_CMD,
+		.no_cmd_params = 0x4,
+		.cmd_params = {0x68, 0x01, 0x01, 0x51},
+		.req = SYNC,
+	},
+	[CMD_ISO14443A_PROTOCOL_SELECT] = {
+		.cmd_len = 0x7,
+		.cmd_id = PROTOCOL_SELECT_CMD,
+		.no_cmd_params = 0x4,
+		.cmd_params = {ISO14443A_PROTOCOL_CODE, 0x00, 0x01, 0xA0},
+		.req = SYNC,
+	},
+	[CMD_ISO14443B_PROTOCOL_SELECT] = {
+		.cmd_len = 0x7,
+		.cmd_id = PROTOCOL_SELECT_CMD,
+		.no_cmd_params = 0x4,
+		.cmd_params = {ISO14443B_PROTOCOL_CODE, 0x01, 0x03, 0xFF},
+		.req = SYNC,
+	},
+	[CMD_WTX_RESPONSE] = {
+		.cmd_len = 0x6,
+		.cmd_id = SEND_RECEIVE_CMD,
+		.no_cmd_params = 0x3,
+		.cmd_params = {0xF2, 0x00, TRFLAG_NFCA_STD_FRAME_CRC},
+		.req = ASYNC,
+	},
+	[CMD_FIELD_OFF] = {
+		.cmd_len = 0x5,
+		.cmd_id = PROTOCOL_SELECT_CMD,
+		.no_cmd_params = 0x2,
+		.cmd_params = {0x0, 0x0},
+		.req = SYNC,
+	},
+	[CMD_ISO15693_PROTOCOL_SELECT] = {
+		.cmd_len = 0x5,
+		.cmd_id = PROTOCOL_SELECT_CMD,
+		.no_cmd_params = 0x2,
+		.cmd_params = {ISO15693_PROTOCOL_CODE, 0x0D},
+		.req = SYNC,
+	},
+};
+
+/* st95_digital_cmd_complete_arg stores client context */
+struct st95_digital_cmd_complete_arg {
+	struct sk_buff *skb_resp;
+	nfc_digital_cmd_complete_t complete_cb;
+	void *cb_usrarg;
+	bool rats;
+};
+
+/*
+ * structure containing ST95HF driver specific data.
+ * @spicontext: structure containing information required
+ *	for spi communication between st95hf and host.
+ * @ddev: nfc digital device object.
+ * @nfcdev: nfc device object.
+ * @enable_gpio: gpio used to enable st95hf transceiver.
+ * @complete_cb_arg: structure to store various context information
+ *	that is passed from nfc requesting thread to the threaded ISR.
+ * @st95hf_supply: regulator "consumer" for NFC device.
+ * @sendrcv_trflag: last byte of frame send by sendrecv command
+ *	of st95hf. This byte contains transmission flag info.
+ * @exchange_lock: semaphore used for signaling the st95hf_remove
+ *	function that the last outstanding async nfc request is finished.
+ * @rm_lock: mutex for ensuring safe access of nfc digital object
+ *	from threaded ISR. Usage of this mutex avoids any race between
+ *	deletion of the object from st95hf_remove() and its access from
+ *	the threaded ISR.
+ * @nfcdev_free: flag to have the state of nfc device object.
+ *	[alive | died]
+ * @current_protocol: current nfc protocol.
+ * @current_rf_tech: current rf technology.
+ * @fwi: frame waiting index, received in reply of RATS according to
+ *	digital protocol.
+ */
+struct st95hf_context {
+	struct st95hf_spi_context spicontext;
+	struct nfc_digital_dev *ddev;
+	struct nfc_dev *nfcdev;
+	unsigned int enable_gpio;
+	struct st95_digital_cmd_complete_arg complete_cb_arg;
+	struct regulator *st95hf_supply;
+	unsigned char sendrcv_trflag;
+	struct semaphore exchange_lock;
+	struct mutex rm_lock;
+	bool nfcdev_free;
+	u8 current_protocol;
+	u8 current_rf_tech;
+	int fwi;
+};
+
+/*
+ * st95hf_send_recv_cmd() is for sending commands to ST95HF
+ * that are described in the cmd_array[]. It can optionally
+ * receive the response if the cmd request is of type
+ * SYNC. For that to happen caller must pass true to recv_res.
+ * For ASYNC request, recv_res is ignored and the
+ * function will never try to receive the response on behalf
+ * of the caller.
+ */
+static int st95hf_send_recv_cmd(struct st95hf_context *st95context,
+				enum st95hf_cmd_list cmd,
+				int no_modif,
+				struct param_list *list_array,
+				bool recv_res)
+{
+	unsigned char spi_cmd_buffer[MAX_CMD_LEN];
+	int i, ret;
+	struct device *dev = &st95context->spicontext.spidev->dev;
+
+	if (cmd_array[cmd].cmd_len > MAX_CMD_LEN)
+		return -EINVAL;
+	if (cmd_array[cmd].no_cmd_params < no_modif)
+		return -EINVAL;
+	if (no_modif && !list_array)
+		return -EINVAL;
+
+	spi_cmd_buffer[0] = ST95HF_COMMAND_SEND;
+	spi_cmd_buffer[1] = cmd_array[cmd].cmd_id;
+	spi_cmd_buffer[2] = cmd_array[cmd].no_cmd_params;
+
+	memcpy(&spi_cmd_buffer[3], cmd_array[cmd].cmd_params,
+	       spi_cmd_buffer[2]);
+
+	for (i = 0; i < no_modif; i++) {
+		if (list_array[i].param_offset >= cmd_array[cmd].no_cmd_params)
+			return -EINVAL;
+		spi_cmd_buffer[3 + list_array[i].param_offset] =
+						list_array[i].new_param_val;
+	}
+
+	ret = st95hf_spi_send(&st95context->spicontext,
+			      spi_cmd_buffer,
+			      cmd_array[cmd].cmd_len,
+			      cmd_array[cmd].req);
+	if (ret) {
+		dev_err(dev, "st95hf_spi_send failed with error %d\n", ret);
+		return ret;
+	}
+
+	if (cmd_array[cmd].req == SYNC && recv_res) {
+		unsigned char st95hf_response_arr[2];
+
+		ret = st95hf_spi_recv_response(&st95context->spicontext,
+					       st95hf_response_arr);
+		if (ret < 0) {
+			dev_err(dev, "spi error from st95hf_spi_recv_response(), err = 0x%x\n",
+				ret);
+			return ret;
+		}
+
+		if (st95hf_response_arr[0]) {
+			dev_err(dev, "st95hf error from st95hf_spi_recv_response(), err = 0x%x\n",
+				st95hf_response_arr[0]);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int st95hf_echo_command(struct st95hf_context *st95context)
+{
+	int result = 0;
+	unsigned char echo_response;
+
+	result = st95hf_send_recv_cmd(st95context, CMD_ECHO, 0, NULL, false);
+	if (result)
+		return result;
+
+	/* If control reached here, response can be taken */
+	result = st95hf_spi_recv_echo_res(&st95context->spicontext,
+					  &echo_response);
+	if (result) {
+		dev_err(&st95context->spicontext.spidev->dev,
+			"err: echo response receieve error = 0x%x\n", result);
+		return result;
+	}
+
+	if (echo_response == ECHORESPONSE)
+		return 0;
+
+	dev_err(&st95context->spicontext.spidev->dev, "err: echo res is 0x%x\n",
+		echo_response);
+
+	return -EIO;
+}
+
+static int secondary_configuration_type4a(struct st95hf_context *stcontext)
+{
+	int result = 0;
+	struct device *dev = &stcontext->nfcdev->dev;
+
+	/* 14443A config setting after select protocol */
+	result = st95hf_send_recv_cmd(stcontext,
+				      CMD_ISO14443A_CONFIG,
+				      0,
+				      NULL,
+				      true);
+	if (result) {
+		dev_err(dev, "type a config cmd, err = 0x%x\n", result);
+		return result;
+	}
+
+	/* 14443A demo gain setting */
+	result = st95hf_send_recv_cmd(stcontext,
+				      CMD_ISO14443A_DEMOGAIN,
+				      0,
+				      NULL,
+				      true);
+	if (result)
+		dev_err(dev, "type a demogain cmd, err = 0x%x\n", result);
+
+	return result;
+}
+
+static int secondary_configuration_type4b(struct st95hf_context *stcontext)
+{
+	int result = 0;
+	struct device *dev = &stcontext->nfcdev->dev;
+
+	result = st95hf_send_recv_cmd(stcontext,
+				      CMD_ISO14443B_DEMOGAIN,
+				      0,
+				      NULL,
+				      true);
+	if (result)
+		dev_err(dev, "type b demogain cmd, err = 0x%x\n", result);
+
+	return result;
+}
+
+static int st95hf_select_protocol(struct st95hf_context *stcontext, int type)
+{
+	int result = 0;
+	struct device *dev;
+
+	dev = &stcontext->nfcdev->dev;
+
+	switch (type) {
+	case NFC_DIGITAL_RF_TECH_106A:
+		stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_106A;
+		result = st95hf_send_recv_cmd(stcontext,
+					      CMD_ISO14443A_PROTOCOL_SELECT,
+					      0,
+					      NULL,
+					      true);
+		if (result) {
+			dev_err(dev, "protocol sel, err = 0x%x\n",
+				result);
+			return result;
+		}
+
+		/* secondary config. for 14443Type 4A after protocol select */
+		result = secondary_configuration_type4a(stcontext);
+		if (result) {
+			dev_err(dev, "type a secondary config, err = 0x%x\n",
+				result);
+			return result;
+		}
+		break;
+	case NFC_DIGITAL_RF_TECH_106B:
+		stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_106B;
+		result = st95hf_send_recv_cmd(stcontext,
+					      CMD_ISO14443B_PROTOCOL_SELECT,
+					      0,
+					      NULL,
+					      true);
+		if (result) {
+			dev_err(dev, "protocol sel send, err = 0x%x\n",
+				result);
+			return result;
+		}
+
+		/*
+		 * delay of 5-6 ms is required after select protocol
+		 * command in case of ISO14443 Type B
+		 */
+		usleep_range(50000, 60000);
+
+		/* secondary config. for 14443Type 4B after protocol select */
+		result = secondary_configuration_type4b(stcontext);
+		if (result) {
+			dev_err(dev, "type b secondary config, err = 0x%x\n",
+				result);
+			return result;
+		}
+		break;
+	case NFC_DIGITAL_RF_TECH_ISO15693:
+		stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_ISO15693;
+		result = st95hf_send_recv_cmd(stcontext,
+					      CMD_ISO15693_PROTOCOL_SELECT,
+					      0,
+					      NULL,
+					      true);
+		if (result) {
+			dev_err(dev, "protocol sel send, err = 0x%x\n",
+				result);
+			return result;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void st95hf_send_st95enable_negativepulse(struct st95hf_context *st95con)
+{
+	/* First make irq_in pin high */
+	gpio_set_value(st95con->enable_gpio, HIGH);
+
+	/* wait for 1 milisecond */
+	usleep_range(1000, 2000);
+
+	/* Make irq_in pin low */
+	gpio_set_value(st95con->enable_gpio, LOW);
+
+	/* wait for minimum interrupt pulse to make st95 active */
+	usleep_range(1000, 2000);
+
+	/* At end make it high */
+	gpio_set_value(st95con->enable_gpio, HIGH);
+}
+
+/*
+ * Send a reset sequence over SPI bus (Reset command + wait 3ms +
+ * negative pulse on st95hf enable gpio
+ */
+static int st95hf_send_spi_reset_sequence(struct st95hf_context *st95context)
+{
+	int result = 0;
+	unsigned char reset_cmd = ST95HF_COMMAND_RESET;
+
+	result = st95hf_spi_send(&st95context->spicontext,
+				 &reset_cmd,
+				 ST95HF_RESET_CMD_LEN,
+				 ASYNC);
+	if (result) {
+		dev_err(&st95context->spicontext.spidev->dev,
+			"spi reset sequence cmd error = %d", result);
+		return result;
+	}
+
+	/* wait for 3 milisecond to complete the controller reset process */
+	usleep_range(3000, 4000);
+
+	/* send negative pulse to make st95hf active */
+	st95hf_send_st95enable_negativepulse(st95context);
+
+	/* wait for 10 milisecond : HFO setup time */
+	usleep_range(10000, 20000);
+
+	return result;
+}
+
+static int st95hf_por_sequence(struct st95hf_context *st95context)
+{
+	int nth_attempt = 1;
+	int result;
+
+	st95hf_send_st95enable_negativepulse(st95context);
+
+	usleep_range(5000, 6000);
+	do {
+		/* send an ECHO command and checks ST95HF response */
+		result = st95hf_echo_command(st95context);
+
+		dev_dbg(&st95context->spicontext.spidev->dev,
+			"response from echo function = 0x%x, attempt = %d\n",
+			result, nth_attempt);
+
+		if (!result)
+			return 0;
+
+		/* send an pulse on IRQ in case of the chip is on sleep state */
+		if (nth_attempt == 2)
+			st95hf_send_st95enable_negativepulse(st95context);
+		else
+			st95hf_send_spi_reset_sequence(st95context);
+
+		/* delay of 50 milisecond */
+		usleep_range(50000, 51000);
+	} while (nth_attempt++ < 3);
+
+	return -ETIMEDOUT;
+}
+
+static int iso14443_config_fdt(struct st95hf_context *st95context, int wtxm)
+{
+	int result = 0;
+	struct device *dev = &st95context->spicontext.spidev->dev;
+	struct nfc_digital_dev *nfcddev = st95context->ddev;
+	unsigned char pp_typeb;
+	struct param_list new_params[2];
+
+	pp_typeb = cmd_array[CMD_ISO14443B_PROTOCOL_SELECT].cmd_params[2];
+
+	if (nfcddev->curr_protocol == NFC_PROTO_ISO14443 &&
+	    st95context->fwi < 4)
+		st95context->fwi = 4;
+
+	new_params[0].param_offset = 2;
+	if (nfcddev->curr_protocol == NFC_PROTO_ISO14443)
+		new_params[0].new_param_val = st95context->fwi;
+	else if (nfcddev->curr_protocol == NFC_PROTO_ISO14443_B)
+		new_params[0].new_param_val = pp_typeb;
+
+	new_params[1].param_offset = 3;
+	new_params[1].new_param_val = wtxm;
+
+	switch (nfcddev->curr_protocol) {
+	case NFC_PROTO_ISO14443:
+		result = st95hf_send_recv_cmd(st95context,
+					      CMD_ISO14443A_PROTOCOL_SELECT,
+					      2,
+					      new_params,
+					      true);
+		if (result) {
+			dev_err(dev, "WTX type a sel proto, err = 0x%x\n",
+				result);
+			return result;
+		}
+
+		/* secondary config. for 14443Type 4A after protocol select */
+		result = secondary_configuration_type4a(st95context);
+		if (result) {
+			dev_err(dev, "WTX type a second. config, err = 0x%x\n",
+				result);
+			return result;
+		}
+		break;
+	case NFC_PROTO_ISO14443_B:
+		result = st95hf_send_recv_cmd(st95context,
+					      CMD_ISO14443B_PROTOCOL_SELECT,
+					      2,
+					      new_params,
+					      true);
+		if (result) {
+			dev_err(dev, "WTX type b sel proto, err = 0x%x\n",
+				result);
+			return result;
+		}
+
+		/* secondary config. for 14443Type 4B after protocol select */
+		result = secondary_configuration_type4b(st95context);
+		if (result) {
+			dev_err(dev, "WTX type b second. config, err = 0x%x\n",
+				result);
+			return result;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int st95hf_handle_wtx(struct st95hf_context *stcontext,
+			     bool new_wtx,
+			     int wtx_val)
+{
+	int result = 0;
+	unsigned char val_mm = 0;
+	struct param_list new_params[1];
+	struct nfc_digital_dev *nfcddev = stcontext->ddev;
+	struct device *dev = &stcontext->nfcdev->dev;
+
+	if (new_wtx) {
+		result = iso14443_config_fdt(stcontext, wtx_val & 0x3f);
+		if (result) {
+			dev_err(dev, "Config. setting error on WTX req, err = 0x%x\n",
+				result);
+			return result;
+		}
+
+		/* Send response of wtx with ASYNC as no response expected */
+		new_params[0].param_offset = 1;
+		new_params[0].new_param_val = wtx_val;
+
+		result = st95hf_send_recv_cmd(stcontext,
+					      CMD_WTX_RESPONSE,
+					      1,
+					      new_params,
+					      false);
+		if (result)
+			dev_err(dev, "WTX response send, err = 0x%x\n", result);
+		return result;
+	}
+
+	/* if no new wtx, cofigure with default values */
+	if (nfcddev->curr_protocol == NFC_PROTO_ISO14443)
+		val_mm = cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[3];
+	else if (nfcddev->curr_protocol == NFC_PROTO_ISO14443_B)
+		val_mm = cmd_array[CMD_ISO14443B_PROTOCOL_SELECT].cmd_params[3];
+
+	result = iso14443_config_fdt(stcontext, val_mm);
+	if (result)
+		dev_err(dev, "Default config. setting error after WTX processing, err = 0x%x\n",
+			result);
+
+	return result;
+}
+
+static int st95hf_error_handling(struct st95hf_context *stcontext,
+				 struct sk_buff *skb_resp,
+				 int res_len)
+{
+	int result = 0;
+	unsigned char error_byte;
+	struct device *dev = &stcontext->nfcdev->dev;
+
+	/* First check ST95HF specific error */
+	if (skb_resp->data[0] & ST95HF_ERR_MASK) {
+		if (skb_resp->data[0] == ST95HF_TIMEOUT_ERROR)
+			result = -ETIMEDOUT;
+		else
+			result = -EIO;
+	return  result;
+	}
+
+	/* Check for CRC err only if CRC is present in the tag response */
+	switch (stcontext->current_rf_tech) {
+	case NFC_DIGITAL_RF_TECH_106A:
+		if (stcontext->sendrcv_trflag == TRFLAG_NFCA_STD_FRAME_CRC) {
+			error_byte = skb_resp->data[res_len - 3];
+			if (error_byte & ST95HF_NFCA_CRC_ERR_MASK) {
+				/* CRC error occurred */
+				dev_err(dev, "CRC error, byte received = 0x%x\n",
+					error_byte);
+				result = -EIO;
+			}
+		}
+		break;
+	case NFC_DIGITAL_RF_TECH_106B:
+	case NFC_DIGITAL_RF_TECH_ISO15693:
+		error_byte = skb_resp->data[res_len - 1];
+		if (error_byte & ST95HF_NFCB_CRC_ERR_MASK) {
+			/* CRC error occurred */
+			dev_err(dev, "CRC error, byte received = 0x%x\n",
+				error_byte);
+			result = -EIO;
+		}
+		break;
+	}
+
+	return result;
+}
+
+static int st95hf_response_handler(struct st95hf_context *stcontext,
+				   struct sk_buff *skb_resp,
+				   int res_len)
+{
+	int result = 0;
+	int skb_len;
+	unsigned char val_mm;
+	struct nfc_digital_dev *nfcddev = stcontext->ddev;
+	struct device *dev = &stcontext->nfcdev->dev;
+	struct st95_digital_cmd_complete_arg *cb_arg;
+
+	cb_arg = &stcontext->complete_cb_arg;
+
+	/* Process the response */
+	skb_put(skb_resp, res_len);
+
+	/* Remove st95 header */
+	skb_pull(skb_resp, 2);
+
+	skb_len = skb_resp->len;
+
+	/* check if it is case of RATS request reply & FWI is present */
+	if (nfcddev->curr_protocol == NFC_PROTO_ISO14443 && cb_arg->rats &&
+	    (skb_resp->data[1] & RATS_TB1_PRESENT_MASK)) {
+		if (skb_resp->data[1] & RATS_TA1_PRESENT_MASK)
+			stcontext->fwi =
+				(skb_resp->data[3] & TB1_FWI_MASK) >> 4;
+		else
+			stcontext->fwi =
+				(skb_resp->data[2] & TB1_FWI_MASK) >> 4;
+
+		val_mm = cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[3];
+
+		result = iso14443_config_fdt(stcontext, val_mm);
+		if (result) {
+			dev_err(dev, "error in config_fdt to handle fwi of ATS, error=%d\n",
+				result);
+			return result;
+		}
+	}
+	cb_arg->rats = false;
+
+	/* Remove CRC bytes only if received frames data has an eod (CRC) */
+	switch (stcontext->current_rf_tech) {
+	case NFC_DIGITAL_RF_TECH_106A:
+		if (stcontext->sendrcv_trflag == TRFLAG_NFCA_STD_FRAME_CRC)
+			skb_trim(skb_resp, (skb_len - 5));
+		else
+			skb_trim(skb_resp, (skb_len - 3));
+		break;
+	case NFC_DIGITAL_RF_TECH_106B:
+	case NFC_DIGITAL_RF_TECH_ISO15693:
+		skb_trim(skb_resp, (skb_len - 3));
+		break;
+	}
+
+	return result;
+}
+
+static irqreturn_t st95hf_irq_handler(int irq, void  *st95hfcontext)
+{
+	struct st95hf_context *stcontext  =
+		(struct st95hf_context *)st95hfcontext;
+
+	if (stcontext->spicontext.req_issync) {
+		complete(&stcontext->spicontext.done);
+		stcontext->spicontext.req_issync = false;
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t st95hf_irq_thread_handler(int irq, void  *st95hfcontext)
+{
+	int result = 0;
+	int res_len;
+	static bool wtx;
+	struct device *dev;
+	struct device *spidevice;
+	struct nfc_digital_dev *nfcddev;
+	struct sk_buff *skb_resp;
+	struct st95hf_context *stcontext  =
+		(struct st95hf_context *)st95hfcontext;
+	struct st95_digital_cmd_complete_arg *cb_arg;
+
+	spidevice = &stcontext->spicontext.spidev->dev;
+
+	/*
+	 * check semaphore, if not down() already, then we don't
+	 * know in which context the ISR is called and surely it
+	 * will be a bug. Note that down() of the semaphore is done
+	 * in the corresponding st95hf_in_send_cmd() and then
+	 * only this ISR should be called. ISR will up() the
+	 * semaphore before leaving. Hence when the ISR is called
+	 * the correct behaviour is down_trylock() should always
+	 * return 1 (indicating semaphore cant be taken and hence no
+	 * change in semaphore count).
+	 * If not, then we up() the semaphore and crash on
+	 * a BUG() !
+	 */
+	if (!down_trylock(&stcontext->exchange_lock)) {
+		up(&stcontext->exchange_lock);
+		WARN(1, "unknown context in ST95HF ISR");
+		return IRQ_NONE;
+	}
+
+	cb_arg = &stcontext->complete_cb_arg;
+	skb_resp = cb_arg->skb_resp;
+
+	mutex_lock(&stcontext->rm_lock);
+	res_len = st95hf_spi_recv_response(&stcontext->spicontext,
+					   skb_resp->data);
+	if (res_len < 0) {
+		dev_err(spidevice, "TISR spi response err = 0x%x\n", res_len);
+		result = res_len;
+		goto end;
+	}
+
+	/* if stcontext->nfcdev_free is true, it means remove already ran */
+	if (stcontext->nfcdev_free) {
+		result = -ENODEV;
+		goto end;
+	}
+
+	dev = &stcontext->nfcdev->dev;
+	nfcddev = stcontext->ddev;
+	if (skb_resp->data[2] == WTX_REQ_FROM_TAG) {
+		/* Request for new FWT from tag */
+		result = st95hf_handle_wtx(stcontext, true, skb_resp->data[3]);
+		if (result)
+			goto end;
+
+		wtx = true;
+		mutex_unlock(&stcontext->rm_lock);
+		return IRQ_HANDLED;
+	}
+
+	result = st95hf_error_handling(stcontext, skb_resp, res_len);
+	if (result)
+		goto end;
+
+	result = st95hf_response_handler(stcontext, skb_resp, res_len);
+	if (result)
+		goto end;
+
+	/*
+	 * If select protocol is done on wtx req. do select protocol
+	 * again with default values
+	 */
+	if (wtx) {
+		wtx = false;
+		result = st95hf_handle_wtx(stcontext, false, 0);
+		if (result)
+			goto end;
+	}
+
+	/* call digital layer callback */
+	cb_arg->complete_cb(stcontext->ddev, cb_arg->cb_usrarg, skb_resp);
+
+	/* up the semaphore before returning */
+	up(&stcontext->exchange_lock);
+	mutex_unlock(&stcontext->rm_lock);
+
+	return IRQ_HANDLED;
+
+end:
+	kfree_skb(skb_resp);
+	wtx = false;
+	cb_arg->rats = false;
+	skb_resp = ERR_PTR(result);
+	/* call of callback with error */
+	cb_arg->complete_cb(stcontext->ddev, cb_arg->cb_usrarg, skb_resp);
+	/* up the semaphore before returning */
+	up(&stcontext->exchange_lock);
+	mutex_unlock(&stcontext->rm_lock);
+	return IRQ_HANDLED;
+}
+
+/* NFC ops functions definition */
+static int st95hf_in_configure_hw(struct nfc_digital_dev *ddev,
+				  int type,
+				  int param)
+{
+	struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev);
+
+	if (type == NFC_DIGITAL_CONFIG_RF_TECH)
+		return st95hf_select_protocol(stcontext, param);
+
+	if (type == NFC_DIGITAL_CONFIG_FRAMING) {
+		switch (param) {
+		case NFC_DIGITAL_FRAMING_NFCA_SHORT:
+			stcontext->sendrcv_trflag = TRFLAG_NFCA_SHORT_FRAME;
+			break;
+		case NFC_DIGITAL_FRAMING_NFCA_STANDARD:
+			stcontext->sendrcv_trflag = TRFLAG_NFCA_STD_FRAME;
+			break;
+		case NFC_DIGITAL_FRAMING_NFCA_T4T:
+		case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP:
+		case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A:
+			stcontext->sendrcv_trflag = TRFLAG_NFCA_STD_FRAME_CRC;
+			break;
+		case NFC_DIGITAL_FRAMING_NFCB:
+		case NFC_DIGITAL_FRAMING_ISO15693_INVENTORY:
+		case NFC_DIGITAL_FRAMING_ISO15693_T5T:
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int rf_off(struct st95hf_context *stcontext)
+{
+	int rc;
+	struct device *dev;
+
+	dev = &stcontext->nfcdev->dev;
+
+	rc = st95hf_send_recv_cmd(stcontext, CMD_FIELD_OFF, 0, NULL, true);
+	if (rc)
+		dev_err(dev, "protocol sel send field off, err = 0x%x\n", rc);
+
+	return rc;
+}
+
+static int st95hf_in_send_cmd(struct nfc_digital_dev *ddev,
+			      struct sk_buff *skb,
+			      u16 timeout,
+			      nfc_digital_cmd_complete_t cb,
+			      void *arg)
+{
+	struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev);
+	int rc;
+	struct sk_buff *skb_resp;
+	int len_data_to_tag = 0;
+
+	skb_resp = nfc_alloc_recv_skb(MAX_RESPONSE_BUFFER_SIZE, GFP_KERNEL);
+	if (!skb_resp) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	switch (stcontext->current_rf_tech) {
+	case NFC_DIGITAL_RF_TECH_106A:
+		len_data_to_tag = skb->len + 1;
+		skb_put_u8(skb, stcontext->sendrcv_trflag);
+		break;
+	case NFC_DIGITAL_RF_TECH_106B:
+	case NFC_DIGITAL_RF_TECH_ISO15693:
+		len_data_to_tag = skb->len;
+		break;
+	default:
+		rc = -EINVAL;
+		goto free_skb_resp;
+	}
+
+	skb_push(skb, 3);
+	skb->data[0] = ST95HF_COMMAND_SEND;
+	skb->data[1] = SEND_RECEIVE_CMD;
+	skb->data[2] = len_data_to_tag;
+
+	stcontext->complete_cb_arg.skb_resp = skb_resp;
+	stcontext->complete_cb_arg.cb_usrarg = arg;
+	stcontext->complete_cb_arg.complete_cb = cb;
+
+	if ((skb->data[3] == ISO14443A_RATS_REQ) &&
+	    ddev->curr_protocol == NFC_PROTO_ISO14443)
+		stcontext->complete_cb_arg.rats = true;
+
+	/*
+	 * down the semaphore to indicate to remove func that an
+	 * ISR is pending, note that it will not block here in any case.
+	 * If found blocked, it is a BUG!
+	 */
+	rc = down_killable(&stcontext->exchange_lock);
+	if (rc) {
+		WARN(1, "Semaphore is not found up in st95hf_in_send_cmd\n");
+		goto free_skb_resp;
+	}
+
+	rc = st95hf_spi_send(&stcontext->spicontext, skb->data,
+			     skb->len,
+			     ASYNC);
+	if (rc) {
+		dev_err(&stcontext->nfcdev->dev,
+			"Error %d trying to perform data_exchange", rc);
+		/* up the semaphore since ISR will never come in this case */
+		up(&stcontext->exchange_lock);
+		goto free_skb_resp;
+	}
+
+	kfree_skb(skb);
+
+	return rc;
+
+free_skb_resp:
+	kfree_skb(skb_resp);
+error:
+	return rc;
+}
+
+/* p2p will be supported in a later release ! */
+static int st95hf_tg_configure_hw(struct nfc_digital_dev *ddev,
+				  int type,
+				  int param)
+{
+	return 0;
+}
+
+static int st95hf_tg_send_cmd(struct nfc_digital_dev *ddev,
+			      struct sk_buff *skb,
+			      u16 timeout,
+			      nfc_digital_cmd_complete_t cb,
+			      void *arg)
+{
+	return 0;
+}
+
+static int st95hf_tg_listen(struct nfc_digital_dev *ddev,
+			    u16 timeout,
+			    nfc_digital_cmd_complete_t cb,
+			    void *arg)
+{
+	return 0;
+}
+
+static int st95hf_tg_get_rf_tech(struct nfc_digital_dev *ddev, u8 *rf_tech)
+{
+	return 0;
+}
+
+static int st95hf_switch_rf(struct nfc_digital_dev *ddev, bool on)
+{
+	u8 rf_tech;
+	struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev);
+
+	rf_tech = ddev->curr_rf_tech;
+
+	if (on)
+		/* switch on RF field */
+		return st95hf_select_protocol(stcontext, rf_tech);
+
+	/* switch OFF RF field */
+	return rf_off(stcontext);
+}
+
+/* TODO st95hf_abort_cmd */
+static void st95hf_abort_cmd(struct nfc_digital_dev *ddev)
+{
+}
+
+static struct nfc_digital_ops st95hf_nfc_digital_ops = {
+	.in_configure_hw = st95hf_in_configure_hw,
+	.in_send_cmd = st95hf_in_send_cmd,
+
+	.tg_listen = st95hf_tg_listen,
+	.tg_configure_hw = st95hf_tg_configure_hw,
+	.tg_send_cmd = st95hf_tg_send_cmd,
+	.tg_get_rf_tech = st95hf_tg_get_rf_tech,
+
+	.switch_rf = st95hf_switch_rf,
+	.abort_cmd = st95hf_abort_cmd,
+};
+
+static const struct spi_device_id st95hf_id[] = {
+	{ "st95hf", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, st95hf_id);
+
+static const struct of_device_id st95hf_spi_of_match[] = {
+        { .compatible = "st,st95hf" },
+        { },
+};
+MODULE_DEVICE_TABLE(of, st95hf_spi_of_match);
+
+static int st95hf_probe(struct spi_device *nfc_spi_dev)
+{
+	int ret;
+
+	struct st95hf_context *st95context;
+	struct st95hf_spi_context *spicontext;
+
+	nfc_info(&nfc_spi_dev->dev, "ST95HF driver probe called.\n");
+
+	st95context = devm_kzalloc(&nfc_spi_dev->dev,
+				   sizeof(struct st95hf_context),
+				   GFP_KERNEL);
+	if (!st95context)
+		return -ENOMEM;
+
+	spicontext = &st95context->spicontext;
+
+	spicontext->spidev = nfc_spi_dev;
+
+	st95context->fwi =
+		cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[2];
+
+	if (device_property_present(&nfc_spi_dev->dev, "st95hfvin")) {
+		st95context->st95hf_supply =
+			devm_regulator_get(&nfc_spi_dev->dev,
+					   "st95hfvin");
+		if (IS_ERR(st95context->st95hf_supply)) {
+			dev_err(&nfc_spi_dev->dev, "failed to acquire regulator\n");
+			return PTR_ERR(st95context->st95hf_supply);
+		}
+
+		ret = regulator_enable(st95context->st95hf_supply);
+		if (ret) {
+			dev_err(&nfc_spi_dev->dev, "failed to enable regulator\n");
+			return ret;
+		}
+	}
+
+	init_completion(&spicontext->done);
+	mutex_init(&spicontext->spi_lock);
+
+	/*
+	 * Store spicontext in spi device object for using it in
+	 * remove function
+	 */
+	dev_set_drvdata(&nfc_spi_dev->dev, spicontext);
+
+	st95context->enable_gpio =
+		of_get_named_gpio(nfc_spi_dev->dev.of_node,
+				  "enable-gpio",
+				  0);
+	if (!gpio_is_valid(st95context->enable_gpio)) {
+		dev_err(&nfc_spi_dev->dev, "No valid enable gpio\n");
+		ret = st95context->enable_gpio;
+		goto err_disable_regulator;
+	}
+
+	ret = devm_gpio_request_one(&nfc_spi_dev->dev, st95context->enable_gpio,
+				    GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
+				    "enable_gpio");
+	if (ret)
+		goto err_disable_regulator;
+
+	if (nfc_spi_dev->irq > 0) {
+		if (devm_request_threaded_irq(&nfc_spi_dev->dev,
+					      nfc_spi_dev->irq,
+					      st95hf_irq_handler,
+					      st95hf_irq_thread_handler,
+					      IRQF_TRIGGER_FALLING,
+					      "st95hf",
+					      (void *)st95context) < 0) {
+			dev_err(&nfc_spi_dev->dev, "err: irq request for st95hf is failed\n");
+			ret =  -EINVAL;
+			goto err_disable_regulator;
+		}
+	} else {
+		dev_err(&nfc_spi_dev->dev, "not a valid IRQ associated with ST95HF\n");
+		ret = -EINVAL;
+		goto err_disable_regulator;
+	}
+
+	/*
+	 * First reset SPI to handle warm reset of the system.
+	 * It will put the ST95HF device in Power ON state
+	 * which make the state of device identical to state
+	 * at the time of cold reset of the system.
+	 */
+	ret = st95hf_send_spi_reset_sequence(st95context);
+	if (ret) {
+		dev_err(&nfc_spi_dev->dev, "err: spi_reset_sequence failed\n");
+		goto err_disable_regulator;
+	}
+
+	/* call PowerOnReset sequence of ST95hf to activate it */
+	ret = st95hf_por_sequence(st95context);
+	if (ret) {
+		dev_err(&nfc_spi_dev->dev, "err: por seq failed for st95hf\n");
+		goto err_disable_regulator;
+	}
+
+	/* create NFC dev object and register with NFC Subsystem */
+	st95context->ddev = nfc_digital_allocate_device(&st95hf_nfc_digital_ops,
+							ST95HF_SUPPORTED_PROT,
+							ST95HF_CAPABILITIES,
+							ST95HF_HEADROOM_LEN,
+							ST95HF_TAILROOM_LEN);
+	if (!st95context->ddev) {
+		ret = -ENOMEM;
+		goto err_disable_regulator;
+	}
+
+	st95context->nfcdev = st95context->ddev->nfc_dev;
+	nfc_digital_set_parent_dev(st95context->ddev, &nfc_spi_dev->dev);
+
+	ret =  nfc_digital_register_device(st95context->ddev);
+	if (ret) {
+		dev_err(&st95context->nfcdev->dev, "st95hf registration failed\n");
+		goto err_free_digital_device;
+	}
+
+	/* store st95context in nfc device object */
+	nfc_digital_set_drvdata(st95context->ddev, st95context);
+
+	sema_init(&st95context->exchange_lock, 1);
+	mutex_init(&st95context->rm_lock);
+
+	return ret;
+
+err_free_digital_device:
+	nfc_digital_free_device(st95context->ddev);
+err_disable_regulator:
+	if (st95context->st95hf_supply)
+		regulator_disable(st95context->st95hf_supply);
+
+	return ret;
+}
+
+static int st95hf_remove(struct spi_device *nfc_spi_dev)
+{
+	int result = 0;
+	unsigned char reset_cmd = ST95HF_COMMAND_RESET;
+	struct st95hf_spi_context *spictx = dev_get_drvdata(&nfc_spi_dev->dev);
+
+	struct st95hf_context *stcontext = container_of(spictx,
+							struct st95hf_context,
+							spicontext);
+
+	mutex_lock(&stcontext->rm_lock);
+
+	nfc_digital_unregister_device(stcontext->ddev);
+	nfc_digital_free_device(stcontext->ddev);
+	stcontext->nfcdev_free = true;
+
+	mutex_unlock(&stcontext->rm_lock);
+
+	/* if last in_send_cmd's ISR is pending, wait for it to finish */
+	result = down_killable(&stcontext->exchange_lock);
+	if (result == -EINTR)
+		dev_err(&spictx->spidev->dev, "sleep for semaphore interrupted by signal\n");
+
+	/* next reset the ST95HF controller */
+	result = st95hf_spi_send(&stcontext->spicontext,
+				 &reset_cmd,
+				 ST95HF_RESET_CMD_LEN,
+				 ASYNC);
+	if (result) {
+		dev_err(&spictx->spidev->dev,
+			"ST95HF reset failed in remove() err = %d\n", result);
+		return result;
+	}
+
+	/* wait for 3 ms to complete the controller reset process */
+	usleep_range(3000, 4000);
+
+	/* disable regulator */
+	if (stcontext->st95hf_supply)
+		regulator_disable(stcontext->st95hf_supply);
+
+	return result;
+}
+
+/* Register as SPI protocol driver */
+static struct spi_driver st95hf_driver = {
+	.driver = {
+		.name = "st95hf",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(st95hf_spi_of_match),
+	},
+	.id_table = st95hf_id,
+	.probe = st95hf_probe,
+	.remove = st95hf_remove,
+};
+
+module_spi_driver(st95hf_driver);
+
+MODULE_AUTHOR("Shikha Singh <shikha.singh@st.com>");
+MODULE_DESCRIPTION("ST NFC Transceiver ST95HF driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nfc/st95hf/spi.c b/drivers/nfc/st95hf/spi.c
new file mode 100644
index 000000000..e2d3bbcc8
--- /dev/null
+++ b/drivers/nfc/st95hf/spi.c
@@ -0,0 +1,167 @@
+/*
+ * ----------------------------------------------------------------------------
+ * drivers/nfc/st95hf/spi.c function definitions for SPI communication
+ * ----------------------------------------------------------------------------
+ * Copyright (C) 2015 STMicroelectronics Pvt. Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "spi.h"
+
+/* Function to send user provided buffer to ST95HF through SPI */
+int st95hf_spi_send(struct st95hf_spi_context *spicontext,
+		    unsigned char *buffertx,
+		    int datalen,
+		    enum req_type reqtype)
+{
+	struct spi_message m;
+	int result = 0;
+	struct spi_device *spidev = spicontext->spidev;
+	struct spi_transfer tx_transfer = {
+		.tx_buf = buffertx,
+		.len = datalen,
+	};
+
+	mutex_lock(&spicontext->spi_lock);
+
+	if (reqtype == SYNC) {
+		spicontext->req_issync = true;
+		reinit_completion(&spicontext->done);
+	} else {
+		spicontext->req_issync = false;
+	}
+
+	spi_message_init(&m);
+	spi_message_add_tail(&tx_transfer, &m);
+
+	result = spi_sync(spidev, &m);
+	if (result) {
+		dev_err(&spidev->dev, "error: sending cmd to st95hf using SPI = %d\n",
+			result);
+		mutex_unlock(&spicontext->spi_lock);
+		return result;
+	}
+
+	/* return for asynchronous or no-wait case */
+	if (reqtype == ASYNC) {
+		mutex_unlock(&spicontext->spi_lock);
+		return 0;
+	}
+
+	result = wait_for_completion_timeout(&spicontext->done,
+					     msecs_to_jiffies(1000));
+	/* check for timeout or success */
+	if (!result) {
+		dev_err(&spidev->dev, "error: response not ready timeout\n");
+		result = -ETIMEDOUT;
+	} else {
+		result = 0;
+	}
+
+	mutex_unlock(&spicontext->spi_lock);
+
+	return result;
+}
+EXPORT_SYMBOL_GPL(st95hf_spi_send);
+
+/* Function to Receive command Response */
+int st95hf_spi_recv_response(struct st95hf_spi_context *spicontext,
+			     unsigned char *receivebuff)
+{
+	int len = 0;
+	struct spi_transfer tx_takedata;
+	struct spi_message m;
+	struct spi_device *spidev = spicontext->spidev;
+	unsigned char readdata_cmd = ST95HF_COMMAND_RECEIVE;
+	struct spi_transfer t[2] = {
+		{.tx_buf = &readdata_cmd, .len = 1,},
+		{.rx_buf = receivebuff, .len = 2, .cs_change = 1,},
+	};
+
+	int ret = 0;
+
+	memset(&tx_takedata, 0x0, sizeof(struct spi_transfer));
+
+	mutex_lock(&spicontext->spi_lock);
+
+	/* First spi transfer to know the length of valid data */
+	spi_message_init(&m);
+	spi_message_add_tail(&t[0], &m);
+	spi_message_add_tail(&t[1], &m);
+
+	ret = spi_sync(spidev, &m);
+	if (ret) {
+		dev_err(&spidev->dev, "spi_recv_resp, data length error = %d\n",
+			ret);
+		mutex_unlock(&spicontext->spi_lock);
+		return ret;
+	}
+
+	/* As 2 bytes are already read */
+	len = 2;
+
+	/* Support of long frame */
+	if (receivebuff[0] & 0x60)
+		len += (((receivebuff[0] & 0x60) >> 5) << 8) | receivebuff[1];
+	else
+		len += receivebuff[1];
+
+	/* Now make a transfer to read only relevant bytes */
+	tx_takedata.rx_buf = &receivebuff[2];
+	tx_takedata.len = len - 2;
+
+	spi_message_init(&m);
+	spi_message_add_tail(&tx_takedata, &m);
+
+	ret = spi_sync(spidev, &m);
+
+	mutex_unlock(&spicontext->spi_lock);
+	if (ret) {
+		dev_err(&spidev->dev, "spi_recv_resp, data read error = %d\n",
+			ret);
+		return ret;
+	}
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(st95hf_spi_recv_response);
+
+int st95hf_spi_recv_echo_res(struct st95hf_spi_context *spicontext,
+			     unsigned char *receivebuff)
+{
+	unsigned char readdata_cmd = ST95HF_COMMAND_RECEIVE;
+	struct spi_transfer t[2] = {
+		{.tx_buf = &readdata_cmd, .len = 1,},
+		{.rx_buf = receivebuff, .len = 1,},
+	};
+	struct spi_message m;
+	struct spi_device *spidev = spicontext->spidev;
+	int ret = 0;
+
+	mutex_lock(&spicontext->spi_lock);
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t[0], &m);
+	spi_message_add_tail(&t[1], &m);
+	ret = spi_sync(spidev, &m);
+
+	mutex_unlock(&spicontext->spi_lock);
+
+	if (ret)
+		dev_err(&spidev->dev, "recv_echo_res, data read error = %d\n",
+			ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(st95hf_spi_recv_echo_res);
diff --git a/drivers/nfc/st95hf/spi.h b/drivers/nfc/st95hf/spi.h
new file mode 100644
index 000000000..552d22074
--- /dev/null
+++ b/drivers/nfc/st95hf/spi.h
@@ -0,0 +1,64 @@
+/*
+ * ---------------------------------------------------------------------------
+ * drivers/nfc/st95hf/spi.h functions declarations for SPI communication
+ * ---------------------------------------------------------------------------
+ * Copyright (C) 2015 STMicroelectronics – All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LINUX_ST95HF_SPI_H
+#define __LINUX_ST95HF_SPI_H
+
+#include <linux/spi/spi.h>
+
+/* Basic ST95HF SPI CMDs */
+#define ST95HF_COMMAND_SEND	0x0
+#define ST95HF_COMMAND_RESET	0x1
+#define ST95HF_COMMAND_RECEIVE	0x2
+
+#define ST95HF_RESET_CMD_LEN	0x1
+
+/*
+ * structure to contain st95hf spi communication specific information.
+ * @req_issync: true for synchronous calls.
+ * @spidev: st95hf spi device object.
+ * @done: completion structure to wait for st95hf response
+ *	for synchronous calls.
+ * @spi_lock: mutex to allow only one spi transfer at a time.
+ */
+struct st95hf_spi_context {
+	bool req_issync;
+	struct spi_device *spidev;
+	struct completion done;
+	struct mutex spi_lock;
+};
+
+/* flag to differentiate synchronous & asynchronous spi request */
+enum req_type {
+	SYNC,
+	ASYNC,
+};
+
+int st95hf_spi_send(struct st95hf_spi_context *spicontext,
+		    unsigned char *buffertx,
+		    int datalen,
+		    enum req_type reqtype);
+
+int st95hf_spi_recv_response(struct st95hf_spi_context *spicontext,
+			     unsigned char *receivebuff);
+
+int st95hf_spi_recv_echo_res(struct st95hf_spi_context *spicontext,
+			     unsigned char *receivebuff);
+
+#endif
diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
new file mode 100644
index 000000000..eee5cc1a9
--- /dev/null
+++ b/drivers/nfc/trf7970a.c
@@ -0,0 +1,2274 @@
+/*
+ * TI TRF7970a RFID/NFC Transceiver Driver
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Erick Macias <emacias@ti.com>
+ * Author: Felipe Balbi <balbi@ti.com>
+ * Author: Mark A. Greer <mgreer@animalcreek.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/nfc.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+
+#include <net/nfc/nfc.h>
+#include <net/nfc/digital.h>
+
+/* There are 3 ways the host can communicate with the trf7970a:
+ * parallel mode, SPI with Slave Select (SS) mode, and SPI without
+ * SS mode.  The driver only supports the two SPI modes.
+ *
+ * The trf7970a is very timing sensitive and the VIN, EN2, and EN
+ * pins must asserted in that order and with specific delays in between.
+ * The delays used in the driver were provided by TI and have been
+ * confirmed to work with this driver.  There is a bug with the current
+ * version of the trf7970a that requires that EN2 remain low no matter
+ * what.  If it goes high, it will generate an RF field even when in
+ * passive target mode.  TI has indicated that the chip will work okay
+ * when EN2 is left low.  The 'en2-rf-quirk' device tree property
+ * indicates that trf7970a currently being used has the erratum and
+ * that EN2 must be kept low.
+ *
+ * Timeouts are implemented using the delayed workqueue kernel facility.
+ * Timeouts are required so things don't hang when there is no response
+ * from the trf7970a (or tag).  Using this mechanism creates a race with
+ * interrupts, however.  That is, an interrupt and a timeout could occur
+ * closely enough together that one is blocked by the mutex while the other
+ * executes.  When the timeout handler executes first and blocks the
+ * interrupt handler, it will eventually set the state to IDLE so the
+ * interrupt handler will check the state and exit with no harm done.
+ * When the interrupt handler executes first and blocks the timeout handler,
+ * the cancel_delayed_work() call will know that it didn't cancel the
+ * work item (i.e., timeout) and will return zero.  That return code is
+ * used by the timer handler to indicate that it should ignore the timeout
+ * once its unblocked.
+ *
+ * Aborting an active command isn't as simple as it seems because the only
+ * way to abort a command that's already been sent to the tag is so turn
+ * off power to the tag.  If we do that, though, we'd have to go through
+ * the entire anticollision procedure again but the digital layer doesn't
+ * support that.  So, if an abort is received before trf7970a_send_cmd()
+ * has sent the command to the tag, it simply returns -ECANCELED.  If the
+ * command has already been sent to the tag, then the driver continues
+ * normally and recieves the response data (or error) but just before
+ * sending the data upstream, it frees the rx_skb and sends -ECANCELED
+ * upstream instead.  If the command failed, that error will be sent
+ * upstream.
+ *
+ * When recieving data from a tag and the interrupt status register has
+ * only the SRX bit set, it means that all of the data has been received
+ * (once what's in the fifo has been read).  However, depending on timing
+ * an interrupt status with only the SRX bit set may not be recived.  In
+ * those cases, the timeout mechanism is used to wait 20 ms in case more
+ * data arrives.  After 20 ms, it is assumed that all of the data has been
+ * received and the accumulated rx data is sent upstream.  The
+ * 'TRF7970A_ST_WAIT_FOR_RX_DATA_CONT' state is used for this purpose
+ * (i.e., it indicates that some data has been received but we're not sure
+ * if there is more coming so a timeout in this state means all data has
+ * been received and there isn't an error).  The delay is 20 ms since delays
+ * of ~16 ms have been observed during testing.
+ *
+ * When transmitting a frame larger than the FIFO size (127 bytes), the
+ * driver will wait 20 ms for the FIFO to drain past the low-watermark
+ * and generate an interrupt.  The low-watermark set to 32 bytes so the
+ * interrupt should fire after 127 - 32 = 95 bytes have been sent.  At
+ * the lowest possible bit rate (6.62 kbps for 15693), it will take up
+ * to ~14.35 ms so 20 ms is used for the timeout.
+ *
+ * Type 2 write and sector select commands respond with a 4-bit ACK or NACK.
+ * Having only 4 bits in the FIFO won't normally generate an interrupt so
+ * driver enables the '4_bit_RX' bit of the Special Functions register 1
+ * to cause an interrupt in that case.  Leaving that bit for a read command
+ * messes up the data returned so it is only enabled when the framing is
+ * 'NFC_DIGITAL_FRAMING_NFCA_T2T' and the command is not a read command.
+ * Unfortunately, that means that the driver has to peek into tx frames
+ * when the framing is 'NFC_DIGITAL_FRAMING_NFCA_T2T'.  This is done by
+ * the trf7970a_per_cmd_config() routine.
+ *
+ * ISO/IEC 15693 frames specify whether to use single or double sub-carrier
+ * frequencies and whether to use low or high data rates in the flags byte
+ * of the frame.  This means that the driver has to peek at all 15693 frames
+ * to determine what speed to set the communication to.  In addition, write
+ * and lock commands use the OPTION flag to indicate that an EOF must be
+ * sent to the tag before it will send its response.  So the driver has to
+ * examine all frames for that reason too.
+ *
+ * It is unclear how long to wait before sending the EOF.  According to the
+ * Note under Table 1-1 in section 1.6 of
+ * http://www.ti.com/lit/ug/scbu011/scbu011.pdf, that wait should be at least
+ * 10 ms for TI Tag-it HF-I tags; however testing has shown that is not long
+ * enough so 20 ms is used.  So the timer is set to 40 ms - 20 ms to drain
+ * up to 127 bytes in the FIFO at the lowest bit rate plus another 20 ms to
+ * ensure the wait is long enough before sending the EOF.  This seems to work
+ * reliably.
+ */
+
+#define TRF7970A_SUPPORTED_PROTOCOLS \
+		(NFC_PROTO_MIFARE_MASK | NFC_PROTO_ISO14443_MASK |	\
+		 NFC_PROTO_ISO14443_B_MASK | NFC_PROTO_FELICA_MASK | \
+		 NFC_PROTO_ISO15693_MASK | NFC_PROTO_NFC_DEP_MASK)
+
+#define TRF7970A_AUTOSUSPEND_DELAY		30000	/* 30 seconds */
+#define TRF7970A_13MHZ_CLOCK_FREQUENCY		13560000
+#define TRF7970A_27MHZ_CLOCK_FREQUENCY		27120000
+
+#define TRF7970A_RX_SKB_ALLOC_SIZE		256
+
+#define TRF7970A_FIFO_SIZE			127
+
+/* TX length is 3 nibbles long ==> 4KB - 1 bytes max */
+#define TRF7970A_TX_MAX				(4096 - 1)
+
+#define TRF7970A_WAIT_FOR_TX_IRQ		20
+#define TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT	20
+#define TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT	20
+#define TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF	40
+
+/* Guard times for various RF technologies (in us) */
+#define TRF7970A_GUARD_TIME_NFCA		5000
+#define TRF7970A_GUARD_TIME_NFCB		5000
+#define TRF7970A_GUARD_TIME_NFCF		20000
+#define TRF7970A_GUARD_TIME_15693		1000
+
+/* Quirks */
+/* Erratum: When reading IRQ Status register on trf7970a, we must issue a
+ * read continuous command for IRQ Status and Collision Position registers.
+ */
+#define TRF7970A_QUIRK_IRQ_STATUS_READ		BIT(0)
+#define TRF7970A_QUIRK_EN2_MUST_STAY_LOW	BIT(1)
+
+/* Direct commands */
+#define TRF7970A_CMD_IDLE			0x00
+#define TRF7970A_CMD_SOFT_INIT			0x03
+#define TRF7970A_CMD_RF_COLLISION		0x04
+#define TRF7970A_CMD_RF_COLLISION_RESPONSE_N	0x05
+#define TRF7970A_CMD_RF_COLLISION_RESPONSE_0	0x06
+#define TRF7970A_CMD_FIFO_RESET			0x0f
+#define TRF7970A_CMD_TRANSMIT_NO_CRC		0x10
+#define TRF7970A_CMD_TRANSMIT			0x11
+#define TRF7970A_CMD_DELAY_TRANSMIT_NO_CRC	0x12
+#define TRF7970A_CMD_DELAY_TRANSMIT		0x13
+#define TRF7970A_CMD_EOF			0x14
+#define TRF7970A_CMD_CLOSE_SLOT			0x15
+#define TRF7970A_CMD_BLOCK_RX			0x16
+#define TRF7970A_CMD_ENABLE_RX			0x17
+#define TRF7970A_CMD_TEST_INT_RF		0x18
+#define TRF7970A_CMD_TEST_EXT_RF		0x19
+#define TRF7970A_CMD_RX_GAIN_ADJUST		0x1a
+
+/* Bits determining whether its a direct command or register R/W,
+ * whether to use a continuous SPI transaction or not, and the actual
+ * direct cmd opcode or regster address.
+ */
+#define TRF7970A_CMD_BIT_CTRL			BIT(7)
+#define TRF7970A_CMD_BIT_RW			BIT(6)
+#define TRF7970A_CMD_BIT_CONTINUOUS		BIT(5)
+#define TRF7970A_CMD_BIT_OPCODE(opcode)		((opcode) & 0x1f)
+
+/* Registers addresses */
+#define TRF7970A_CHIP_STATUS_CTRL		0x00
+#define TRF7970A_ISO_CTRL			0x01
+#define TRF7970A_ISO14443B_TX_OPTIONS		0x02
+#define TRF7970A_ISO14443A_HIGH_BITRATE_OPTIONS	0x03
+#define TRF7970A_TX_TIMER_SETTING_H_BYTE	0x04
+#define TRF7970A_TX_TIMER_SETTING_L_BYTE	0x05
+#define TRF7970A_TX_PULSE_LENGTH_CTRL		0x06
+#define TRF7970A_RX_NO_RESPONSE_WAIT		0x07
+#define TRF7970A_RX_WAIT_TIME			0x08
+#define TRF7970A_MODULATOR_SYS_CLK_CTRL		0x09
+#define TRF7970A_RX_SPECIAL_SETTINGS		0x0a
+#define TRF7970A_REG_IO_CTRL			0x0b
+#define TRF7970A_IRQ_STATUS			0x0c
+#define TRF7970A_COLLISION_IRQ_MASK		0x0d
+#define TRF7970A_COLLISION_POSITION		0x0e
+#define TRF7970A_RSSI_OSC_STATUS		0x0f
+#define TRF7970A_SPECIAL_FCN_REG1		0x10
+#define TRF7970A_SPECIAL_FCN_REG2		0x11
+#define TRF7970A_RAM1				0x12
+#define TRF7970A_RAM2				0x13
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS	0x14
+#define TRF7970A_NFC_LOW_FIELD_LEVEL		0x16
+#define TRF7970A_NFCID1				0x17
+#define TRF7970A_NFC_TARGET_LEVEL		0x18
+#define TRF79070A_NFC_TARGET_PROTOCOL		0x19
+#define TRF7970A_TEST_REGISTER1			0x1a
+#define TRF7970A_TEST_REGISTER2			0x1b
+#define TRF7970A_FIFO_STATUS			0x1c
+#define TRF7970A_TX_LENGTH_BYTE1		0x1d
+#define TRF7970A_TX_LENGTH_BYTE2		0x1e
+#define TRF7970A_FIFO_IO_REGISTER		0x1f
+
+/* Chip Status Control Register Bits */
+#define TRF7970A_CHIP_STATUS_VRS5_3		BIT(0)
+#define TRF7970A_CHIP_STATUS_REC_ON		BIT(1)
+#define TRF7970A_CHIP_STATUS_AGC_ON		BIT(2)
+#define TRF7970A_CHIP_STATUS_PM_ON		BIT(3)
+#define TRF7970A_CHIP_STATUS_RF_PWR		BIT(4)
+#define TRF7970A_CHIP_STATUS_RF_ON		BIT(5)
+#define TRF7970A_CHIP_STATUS_DIRECT		BIT(6)
+#define TRF7970A_CHIP_STATUS_STBY		BIT(7)
+
+/* ISO Control Register Bits */
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF4_662	0x00
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF256_662	0x01
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648	0x02
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF256_2648	0x03
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a	0x04
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF256_667	0x05
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669	0x06
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF256_2669	0x07
+#define TRF7970A_ISO_CTRL_14443A_106		0x08
+#define TRF7970A_ISO_CTRL_14443A_212		0x09
+#define TRF7970A_ISO_CTRL_14443A_424		0x0a
+#define TRF7970A_ISO_CTRL_14443A_848		0x0b
+#define TRF7970A_ISO_CTRL_14443B_106		0x0c
+#define TRF7970A_ISO_CTRL_14443B_212		0x0d
+#define TRF7970A_ISO_CTRL_14443B_424		0x0e
+#define TRF7970A_ISO_CTRL_14443B_848		0x0f
+#define TRF7970A_ISO_CTRL_FELICA_212		0x1a
+#define TRF7970A_ISO_CTRL_FELICA_424		0x1b
+#define TRF7970A_ISO_CTRL_NFC_NFCA_106		0x01
+#define TRF7970A_ISO_CTRL_NFC_NFCF_212		0x02
+#define TRF7970A_ISO_CTRL_NFC_NFCF_424		0x03
+#define TRF7970A_ISO_CTRL_NFC_CE_14443A		0x00
+#define TRF7970A_ISO_CTRL_NFC_CE_14443B		0x01
+#define TRF7970A_ISO_CTRL_NFC_CE		BIT(2)
+#define TRF7970A_ISO_CTRL_NFC_ACTIVE		BIT(3)
+#define TRF7970A_ISO_CTRL_NFC_INITIATOR		BIT(4)
+#define TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE	BIT(5)
+#define TRF7970A_ISO_CTRL_RFID			BIT(5)
+#define TRF7970A_ISO_CTRL_DIR_MODE		BIT(6)
+#define TRF7970A_ISO_CTRL_RX_CRC_N		BIT(7)	/* true == No CRC */
+
+#define TRF7970A_ISO_CTRL_RFID_SPEED_MASK	0x1f
+
+/* Modulator and SYS_CLK Control Register Bits */
+#define TRF7970A_MODULATOR_DEPTH(n)		((n) & 0x7)
+#define TRF7970A_MODULATOR_DEPTH_ASK10		(TRF7970A_MODULATOR_DEPTH(0))
+#define TRF7970A_MODULATOR_DEPTH_OOK		(TRF7970A_MODULATOR_DEPTH(1))
+#define TRF7970A_MODULATOR_DEPTH_ASK7		(TRF7970A_MODULATOR_DEPTH(2))
+#define TRF7970A_MODULATOR_DEPTH_ASK8_5		(TRF7970A_MODULATOR_DEPTH(3))
+#define TRF7970A_MODULATOR_DEPTH_ASK13		(TRF7970A_MODULATOR_DEPTH(4))
+#define TRF7970A_MODULATOR_DEPTH_ASK16		(TRF7970A_MODULATOR_DEPTH(5))
+#define TRF7970A_MODULATOR_DEPTH_ASK22		(TRF7970A_MODULATOR_DEPTH(6))
+#define TRF7970A_MODULATOR_DEPTH_ASK30		(TRF7970A_MODULATOR_DEPTH(7))
+#define TRF7970A_MODULATOR_EN_ANA		BIT(3)
+#define TRF7970A_MODULATOR_CLK(n)		(((n) & 0x3) << 4)
+#define TRF7970A_MODULATOR_CLK_DISABLED		(TRF7970A_MODULATOR_CLK(0))
+#define TRF7970A_MODULATOR_CLK_3_6		(TRF7970A_MODULATOR_CLK(1))
+#define TRF7970A_MODULATOR_CLK_6_13		(TRF7970A_MODULATOR_CLK(2))
+#define TRF7970A_MODULATOR_CLK_13_27		(TRF7970A_MODULATOR_CLK(3))
+#define TRF7970A_MODULATOR_EN_OOK		BIT(6)
+#define TRF7970A_MODULATOR_27MHZ		BIT(7)
+
+#define TRF7970A_RX_SPECIAL_SETTINGS_NO_LIM	BIT(0)
+#define TRF7970A_RX_SPECIAL_SETTINGS_AGCR	BIT(1)
+#define TRF7970A_RX_SPECIAL_SETTINGS_GD_0DB	(0x0 << 2)
+#define TRF7970A_RX_SPECIAL_SETTINGS_GD_5DB	(0x1 << 2)
+#define TRF7970A_RX_SPECIAL_SETTINGS_GD_10DB	(0x2 << 2)
+#define TRF7970A_RX_SPECIAL_SETTINGS_GD_15DB	(0x3 << 2)
+#define TRF7970A_RX_SPECIAL_SETTINGS_HBT	BIT(4)
+#define TRF7970A_RX_SPECIAL_SETTINGS_M848	BIT(5)
+#define TRF7970A_RX_SPECIAL_SETTINGS_C424	BIT(6)
+#define TRF7970A_RX_SPECIAL_SETTINGS_C212	BIT(7)
+
+#define TRF7970A_REG_IO_CTRL_VRS(v)		((v) & 0x07)
+#define TRF7970A_REG_IO_CTRL_IO_LOW		BIT(5)
+#define TRF7970A_REG_IO_CTRL_EN_EXT_PA		BIT(6)
+#define TRF7970A_REG_IO_CTRL_AUTO_REG		BIT(7)
+
+/* IRQ Status Register Bits */
+#define TRF7970A_IRQ_STATUS_NORESP		BIT(0)	/* ISO15693 only */
+#define TRF7970A_IRQ_STATUS_NFC_COL_ERROR	BIT(0)
+#define TRF7970A_IRQ_STATUS_COL			BIT(1)
+#define TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR	BIT(2)
+#define TRF7970A_IRQ_STATUS_NFC_RF		BIT(2)
+#define TRF7970A_IRQ_STATUS_PARITY_ERROR	BIT(3)
+#define TRF7970A_IRQ_STATUS_NFC_SDD		BIT(3)
+#define TRF7970A_IRQ_STATUS_CRC_ERROR		BIT(4)
+#define TRF7970A_IRQ_STATUS_NFC_PROTO_ERROR	BIT(4)
+#define TRF7970A_IRQ_STATUS_FIFO		BIT(5)
+#define TRF7970A_IRQ_STATUS_SRX			BIT(6)
+#define TRF7970A_IRQ_STATUS_TX			BIT(7)
+
+#define TRF7970A_IRQ_STATUS_ERROR				\
+		(TRF7970A_IRQ_STATUS_COL |			\
+		 TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR |	\
+		 TRF7970A_IRQ_STATUS_PARITY_ERROR |		\
+		 TRF7970A_IRQ_STATUS_CRC_ERROR)
+
+#define TRF7970A_RSSI_OSC_STATUS_RSSI_MASK	(BIT(2) | BIT(1) | BIT(0))
+#define TRF7970A_RSSI_OSC_STATUS_RSSI_X_MASK	(BIT(5) | BIT(4) | BIT(3))
+#define TRF7970A_RSSI_OSC_STATUS_RSSI_OSC_OK	BIT(6)
+
+#define TRF7970A_SPECIAL_FCN_REG1_COL_7_6		BIT(0)
+#define TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL		BIT(1)
+#define TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX		BIT(2)
+#define TRF7970A_SPECIAL_FCN_REG1_SP_DIR_MODE		BIT(3)
+#define TRF7970A_SPECIAL_FCN_REG1_NEXT_SLOT_37US	BIT(4)
+#define TRF7970A_SPECIAL_FCN_REG1_PAR43			BIT(5)
+
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_124	(0x0 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_120	(0x1 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_112	(0x2 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96	(0x3 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_4	0x0
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_8	0x1
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_16	0x2
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32	0x3
+
+#define TRF7970A_NFC_LOW_FIELD_LEVEL_RFDET(v)	((v) & 0x07)
+#define TRF7970A_NFC_LOW_FIELD_LEVEL_CLEX_DIS	BIT(7)
+
+#define TRF7970A_NFC_TARGET_LEVEL_RFDET(v)	((v) & 0x07)
+#define TRF7970A_NFC_TARGET_LEVEL_HI_RF		BIT(3)
+#define TRF7970A_NFC_TARGET_LEVEL_SDD_EN	BIT(5)
+#define TRF7970A_NFC_TARGET_LEVEL_LD_S_4BYTES	(0x0 << 6)
+#define TRF7970A_NFC_TARGET_LEVEL_LD_S_7BYTES	(0x1 << 6)
+#define TRF7970A_NFC_TARGET_LEVEL_LD_S_10BYTES	(0x2 << 6)
+
+#define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106		BIT(0)
+#define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_212		BIT(1)
+#define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_424		(BIT(0) | BIT(1))
+#define TRF79070A_NFC_TARGET_PROTOCOL_PAS_14443B	BIT(2)
+#define TRF79070A_NFC_TARGET_PROTOCOL_PAS_106		BIT(3)
+#define TRF79070A_NFC_TARGET_PROTOCOL_FELICA		BIT(4)
+#define TRF79070A_NFC_TARGET_PROTOCOL_RF_L		BIT(6)
+#define TRF79070A_NFC_TARGET_PROTOCOL_RF_H		BIT(7)
+
+#define TRF79070A_NFC_TARGET_PROTOCOL_106A		\
+	 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_RF_L |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_PAS_106 |	\
+	  TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106)
+
+#define TRF79070A_NFC_TARGET_PROTOCOL_106B		\
+	 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_RF_L |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_PAS_14443B |	\
+	  TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106)
+
+#define TRF79070A_NFC_TARGET_PROTOCOL_212F		\
+	 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_RF_L |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_FELICA |	\
+	  TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_212)
+
+#define TRF79070A_NFC_TARGET_PROTOCOL_424F		\
+	 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_RF_L |		\
+	  TRF79070A_NFC_TARGET_PROTOCOL_FELICA |	\
+	  TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_424)
+
+#define TRF7970A_FIFO_STATUS_OVERFLOW		BIT(7)
+
+/* NFC (ISO/IEC 14443A) Type 2 Tag commands */
+#define NFC_T2T_CMD_READ			0x30
+
+/* ISO 15693 commands codes */
+#define ISO15693_CMD_INVENTORY			0x01
+#define ISO15693_CMD_READ_SINGLE_BLOCK		0x20
+#define ISO15693_CMD_WRITE_SINGLE_BLOCK		0x21
+#define ISO15693_CMD_LOCK_BLOCK			0x22
+#define ISO15693_CMD_READ_MULTIPLE_BLOCK	0x23
+#define ISO15693_CMD_WRITE_MULTIPLE_BLOCK	0x24
+#define ISO15693_CMD_SELECT			0x25
+#define ISO15693_CMD_RESET_TO_READY		0x26
+#define ISO15693_CMD_WRITE_AFI			0x27
+#define ISO15693_CMD_LOCK_AFI			0x28
+#define ISO15693_CMD_WRITE_DSFID		0x29
+#define ISO15693_CMD_LOCK_DSFID			0x2a
+#define ISO15693_CMD_GET_SYSTEM_INFO		0x2b
+#define ISO15693_CMD_GET_MULTIPLE_BLOCK_SECURITY_STATUS	0x2c
+
+/* ISO 15693 request and response flags */
+#define ISO15693_REQ_FLAG_SUB_CARRIER		BIT(0)
+#define ISO15693_REQ_FLAG_DATA_RATE		BIT(1)
+#define ISO15693_REQ_FLAG_INVENTORY		BIT(2)
+#define ISO15693_REQ_FLAG_PROTOCOL_EXT		BIT(3)
+#define ISO15693_REQ_FLAG_SELECT		BIT(4)
+#define ISO15693_REQ_FLAG_AFI			BIT(4)
+#define ISO15693_REQ_FLAG_ADDRESS		BIT(5)
+#define ISO15693_REQ_FLAG_NB_SLOTS		BIT(5)
+#define ISO15693_REQ_FLAG_OPTION		BIT(6)
+
+#define ISO15693_REQ_FLAG_SPEED_MASK \
+		(ISO15693_REQ_FLAG_SUB_CARRIER | ISO15693_REQ_FLAG_DATA_RATE)
+
+enum trf7970a_state {
+	TRF7970A_ST_PWR_OFF,
+	TRF7970A_ST_RF_OFF,
+	TRF7970A_ST_IDLE,
+	TRF7970A_ST_IDLE_RX_BLOCKED,
+	TRF7970A_ST_WAIT_FOR_TX_FIFO,
+	TRF7970A_ST_WAIT_FOR_RX_DATA,
+	TRF7970A_ST_WAIT_FOR_RX_DATA_CONT,
+	TRF7970A_ST_WAIT_TO_ISSUE_EOF,
+	TRF7970A_ST_LISTENING,
+	TRF7970A_ST_LISTENING_MD,
+	TRF7970A_ST_MAX
+};
+
+struct trf7970a {
+	enum trf7970a_state		state;
+	struct device			*dev;
+	struct spi_device		*spi;
+	struct regulator		*regulator;
+	struct nfc_digital_dev		*ddev;
+	u32				quirks;
+	bool				is_initiator;
+	bool				aborting;
+	struct sk_buff			*tx_skb;
+	struct sk_buff			*rx_skb;
+	nfc_digital_cmd_complete_t	cb;
+	void				*cb_arg;
+	u8				chip_status_ctrl;
+	u8				iso_ctrl;
+	u8				iso_ctrl_tech;
+	u8				modulator_sys_clk_ctrl;
+	u8				special_fcn_reg1;
+	u8				io_ctrl;
+	unsigned int			guard_time;
+	int				technology;
+	int				framing;
+	u8				md_rf_tech;
+	u8				tx_cmd;
+	bool				issue_eof;
+	struct gpio_desc		*en_gpiod;
+	struct gpio_desc		*en2_gpiod;
+	struct mutex			lock;
+	unsigned int			timeout;
+	bool				ignore_timeout;
+	struct delayed_work		timeout_work;
+};
+
+static int trf7970a_cmd(struct trf7970a *trf, u8 opcode)
+{
+	u8 cmd = TRF7970A_CMD_BIT_CTRL | TRF7970A_CMD_BIT_OPCODE(opcode);
+	int ret;
+
+	dev_dbg(trf->dev, "cmd: 0x%x\n", cmd);
+
+	ret = spi_write(trf->spi, &cmd, 1);
+	if (ret)
+		dev_err(trf->dev, "%s - cmd: 0x%x, ret: %d\n", __func__, cmd,
+			ret);
+	return ret;
+}
+
+static int trf7970a_read(struct trf7970a *trf, u8 reg, u8 *val)
+{
+	u8 addr = TRF7970A_CMD_BIT_RW | reg;
+	int ret;
+
+	ret = spi_write_then_read(trf->spi, &addr, 1, val, 1);
+	if (ret)
+		dev_err(trf->dev, "%s - addr: 0x%x, ret: %d\n", __func__, addr,
+			ret);
+
+	dev_dbg(trf->dev, "read(0x%x): 0x%x\n", addr, *val);
+
+	return ret;
+}
+
+static int trf7970a_read_cont(struct trf7970a *trf, u8 reg, u8 *buf,
+			      size_t len)
+{
+	u8 addr = reg | TRF7970A_CMD_BIT_RW | TRF7970A_CMD_BIT_CONTINUOUS;
+	struct spi_transfer t[2];
+	struct spi_message m;
+	int ret;
+
+	dev_dbg(trf->dev, "read_cont(0x%x, %zd)\n", addr, len);
+
+	spi_message_init(&m);
+
+	memset(&t, 0, sizeof(t));
+
+	t[0].tx_buf = &addr;
+	t[0].len = sizeof(addr);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = buf;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
+
+	ret = spi_sync(trf->spi, &m);
+	if (ret)
+		dev_err(trf->dev, "%s - addr: 0x%x, ret: %d\n", __func__, addr,
+			ret);
+	return ret;
+}
+
+static int trf7970a_write(struct trf7970a *trf, u8 reg, u8 val)
+{
+	u8 buf[2] = { reg, val };
+	int ret;
+
+	dev_dbg(trf->dev, "write(0x%x): 0x%x\n", reg, val);
+
+	ret = spi_write(trf->spi, buf, 2);
+	if (ret)
+		dev_err(trf->dev, "%s - write: 0x%x 0x%x, ret: %d\n", __func__,
+			buf[0], buf[1], ret);
+
+	return ret;
+}
+
+static int trf7970a_read_irqstatus(struct trf7970a *trf, u8 *status)
+{
+	int ret;
+	u8 buf[2];
+	u8 addr;
+
+	addr = TRF7970A_IRQ_STATUS | TRF7970A_CMD_BIT_RW;
+
+	if (trf->quirks & TRF7970A_QUIRK_IRQ_STATUS_READ) {
+		addr |= TRF7970A_CMD_BIT_CONTINUOUS;
+		ret = spi_write_then_read(trf->spi, &addr, 1, buf, 2);
+	} else {
+		ret = spi_write_then_read(trf->spi, &addr, 1, buf, 1);
+	}
+
+	if (ret)
+		dev_err(trf->dev, "%s - irqstatus: Status read failed: %d\n",
+			__func__, ret);
+	else
+		*status = buf[0];
+
+	return ret;
+}
+
+static int trf7970a_read_target_proto(struct trf7970a *trf, u8 *target_proto)
+{
+	int ret;
+	u8 buf[2];
+	u8 addr;
+
+	addr = TRF79070A_NFC_TARGET_PROTOCOL | TRF7970A_CMD_BIT_RW |
+	       TRF7970A_CMD_BIT_CONTINUOUS;
+
+	ret = spi_write_then_read(trf->spi, &addr, 1, buf, 2);
+	if (ret)
+		dev_err(trf->dev, "%s - target_proto: Read failed: %d\n",
+			__func__, ret);
+	else
+		*target_proto = buf[0];
+
+	return ret;
+}
+
+static int trf7970a_mode_detect(struct trf7970a *trf, u8 *rf_tech)
+{
+	int ret;
+	u8 target_proto, tech;
+
+	ret = trf7970a_read_target_proto(trf, &target_proto);
+	if (ret)
+		return ret;
+
+	switch (target_proto) {
+	case TRF79070A_NFC_TARGET_PROTOCOL_106A:
+		tech = NFC_DIGITAL_RF_TECH_106A;
+		break;
+	case TRF79070A_NFC_TARGET_PROTOCOL_106B:
+		tech = NFC_DIGITAL_RF_TECH_106B;
+		break;
+	case TRF79070A_NFC_TARGET_PROTOCOL_212F:
+		tech = NFC_DIGITAL_RF_TECH_212F;
+		break;
+	case TRF79070A_NFC_TARGET_PROTOCOL_424F:
+		tech = NFC_DIGITAL_RF_TECH_424F;
+		break;
+	default:
+		dev_dbg(trf->dev, "%s - mode_detect: target_proto: 0x%x\n",
+			__func__, target_proto);
+		return -EIO;
+	}
+
+	*rf_tech = tech;
+
+	return ret;
+}
+
+static void trf7970a_send_upstream(struct trf7970a *trf)
+{
+	dev_kfree_skb_any(trf->tx_skb);
+	trf->tx_skb = NULL;
+
+	if (trf->rx_skb && !IS_ERR(trf->rx_skb) && !trf->aborting)
+		print_hex_dump_debug("trf7970a rx data: ", DUMP_PREFIX_NONE,
+				     16, 1, trf->rx_skb->data, trf->rx_skb->len,
+				     false);
+
+	trf->state = TRF7970A_ST_IDLE;
+
+	if (trf->aborting) {
+		dev_dbg(trf->dev, "Abort process complete\n");
+
+		if (!IS_ERR(trf->rx_skb)) {
+			kfree_skb(trf->rx_skb);
+			trf->rx_skb = ERR_PTR(-ECANCELED);
+		}
+
+		trf->aborting = false;
+	}
+
+	trf->cb(trf->ddev, trf->cb_arg, trf->rx_skb);
+
+	trf->rx_skb = NULL;
+}
+
+static void trf7970a_send_err_upstream(struct trf7970a *trf, int errno)
+{
+	dev_dbg(trf->dev, "Error - state: %d, errno: %d\n", trf->state, errno);
+
+	cancel_delayed_work(&trf->timeout_work);
+
+	kfree_skb(trf->rx_skb);
+	trf->rx_skb = ERR_PTR(errno);
+
+	trf7970a_send_upstream(trf);
+}
+
+static int trf7970a_transmit(struct trf7970a *trf, struct sk_buff *skb,
+			     unsigned int len, u8 *prefix,
+			     unsigned int prefix_len)
+{
+	struct spi_transfer t[2];
+	struct spi_message m;
+	unsigned int timeout;
+	int ret;
+
+	print_hex_dump_debug("trf7970a tx data: ", DUMP_PREFIX_NONE,
+			     16, 1, skb->data, len, false);
+
+	spi_message_init(&m);
+
+	memset(&t, 0, sizeof(t));
+
+	t[0].tx_buf = prefix;
+	t[0].len = prefix_len;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = skb->data;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
+
+	ret = spi_sync(trf->spi, &m);
+	if (ret) {
+		dev_err(trf->dev, "%s - Can't send tx data: %d\n", __func__,
+			ret);
+		return ret;
+	}
+
+	skb_pull(skb, len);
+
+	if (skb->len > 0) {
+		trf->state = TRF7970A_ST_WAIT_FOR_TX_FIFO;
+		timeout = TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT;
+	} else {
+		if (trf->issue_eof) {
+			trf->state = TRF7970A_ST_WAIT_TO_ISSUE_EOF;
+			timeout = TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF;
+		} else {
+			trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA;
+
+			if (!trf->timeout)
+				timeout = TRF7970A_WAIT_FOR_TX_IRQ;
+			else
+				timeout = trf->timeout;
+		}
+	}
+
+	dev_dbg(trf->dev, "Setting timeout for %d ms, state: %d\n", timeout,
+		trf->state);
+
+	schedule_delayed_work(&trf->timeout_work, msecs_to_jiffies(timeout));
+
+	return 0;
+}
+
+static void trf7970a_fill_fifo(struct trf7970a *trf)
+{
+	struct sk_buff *skb = trf->tx_skb;
+	unsigned int len;
+	int ret;
+	u8 fifo_bytes;
+	u8 prefix;
+
+	ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, &fifo_bytes);
+	if (ret) {
+		trf7970a_send_err_upstream(trf, ret);
+		return;
+	}
+
+	dev_dbg(trf->dev, "Filling FIFO - fifo_bytes: 0x%x\n", fifo_bytes);
+
+	fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW;
+
+	/* Calculate how much more data can be written to the fifo */
+	len = TRF7970A_FIFO_SIZE - fifo_bytes;
+	if (!len) {
+		schedule_delayed_work(&trf->timeout_work,
+			msecs_to_jiffies(TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT));
+		return;
+	}
+
+	len = min(skb->len, len);
+
+	prefix = TRF7970A_CMD_BIT_CONTINUOUS | TRF7970A_FIFO_IO_REGISTER;
+
+	ret = trf7970a_transmit(trf, skb, len, &prefix, sizeof(prefix));
+	if (ret)
+		trf7970a_send_err_upstream(trf, ret);
+}
+
+static void trf7970a_drain_fifo(struct trf7970a *trf, u8 status)
+{
+	struct sk_buff *skb = trf->rx_skb;
+	int ret;
+	u8 fifo_bytes;
+
+	if (status & TRF7970A_IRQ_STATUS_ERROR) {
+		trf7970a_send_err_upstream(trf, -EIO);
+		return;
+	}
+
+	ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, &fifo_bytes);
+	if (ret) {
+		trf7970a_send_err_upstream(trf, ret);
+		return;
+	}
+
+	dev_dbg(trf->dev, "Draining FIFO - fifo_bytes: 0x%x\n", fifo_bytes);
+
+	fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW;
+
+	if (!fifo_bytes)
+		goto no_rx_data;
+
+	if (fifo_bytes > skb_tailroom(skb)) {
+		skb = skb_copy_expand(skb, skb_headroom(skb),
+				      max_t(int, fifo_bytes,
+					    TRF7970A_RX_SKB_ALLOC_SIZE),
+				      GFP_KERNEL);
+		if (!skb) {
+			trf7970a_send_err_upstream(trf, -ENOMEM);
+			return;
+		}
+
+		kfree_skb(trf->rx_skb);
+		trf->rx_skb = skb;
+	}
+
+	ret = trf7970a_read_cont(trf, TRF7970A_FIFO_IO_REGISTER,
+				 skb_put(skb, fifo_bytes), fifo_bytes);
+	if (ret) {
+		trf7970a_send_err_upstream(trf, ret);
+		return;
+	}
+
+	/* If received Type 2 ACK/NACK, shift right 4 bits and pass up */
+	if ((trf->framing == NFC_DIGITAL_FRAMING_NFCA_T2T) && (skb->len == 1) &&
+	    (trf->special_fcn_reg1 == TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX)) {
+		skb->data[0] >>= 4;
+		status = TRF7970A_IRQ_STATUS_SRX;
+	} else {
+		trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA_CONT;
+
+		ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, &fifo_bytes);
+		if (ret) {
+			trf7970a_send_err_upstream(trf, ret);
+			return;
+		}
+
+		fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW;
+
+		/* If there are bytes in the FIFO, set status to '0' so
+		 * the if stmt below doesn't fire and the driver will wait
+		 * for the trf7970a to generate another RX interrupt.
+		 */
+		if (fifo_bytes)
+			status = 0;
+	}
+
+no_rx_data:
+	if (status == TRF7970A_IRQ_STATUS_SRX) {	/* Receive complete */
+		trf7970a_send_upstream(trf);
+		return;
+	}
+
+	dev_dbg(trf->dev, "Setting timeout for %d ms\n",
+		TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT);
+
+	schedule_delayed_work(&trf->timeout_work,
+			   msecs_to_jiffies(TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT));
+}
+
+static irqreturn_t trf7970a_irq(int irq, void *dev_id)
+{
+	struct trf7970a *trf = dev_id;
+	int ret;
+	u8 status, fifo_bytes, iso_ctrl;
+
+	mutex_lock(&trf->lock);
+
+	if (trf->state == TRF7970A_ST_RF_OFF) {
+		mutex_unlock(&trf->lock);
+		return IRQ_NONE;
+	}
+
+	ret = trf7970a_read_irqstatus(trf, &status);
+	if (ret) {
+		mutex_unlock(&trf->lock);
+		return IRQ_NONE;
+	}
+
+	dev_dbg(trf->dev, "IRQ - state: %d, status: 0x%x\n", trf->state,
+		status);
+
+	if (!status) {
+		mutex_unlock(&trf->lock);
+		return IRQ_NONE;
+	}
+
+	switch (trf->state) {
+	case TRF7970A_ST_IDLE:
+	case TRF7970A_ST_IDLE_RX_BLOCKED:
+		/* If initiator and getting interrupts caused by RF noise,
+		 * turn off the receiver to avoid unnecessary interrupts.
+		 * It will be turned back on in trf7970a_send_cmd() when
+		 * the next command is issued.
+		 */
+		if (trf->is_initiator && (status & TRF7970A_IRQ_STATUS_ERROR)) {
+			trf7970a_cmd(trf, TRF7970A_CMD_BLOCK_RX);
+			trf->state = TRF7970A_ST_IDLE_RX_BLOCKED;
+		}
+
+		trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+		break;
+	case TRF7970A_ST_WAIT_FOR_TX_FIFO:
+		if (status & TRF7970A_IRQ_STATUS_TX) {
+			trf->ignore_timeout =
+			    !cancel_delayed_work(&trf->timeout_work);
+			trf7970a_fill_fifo(trf);
+		} else {
+			trf7970a_send_err_upstream(trf, -EIO);
+		}
+		break;
+	case TRF7970A_ST_WAIT_FOR_RX_DATA:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
+		if (status & TRF7970A_IRQ_STATUS_SRX) {
+			trf->ignore_timeout =
+			    !cancel_delayed_work(&trf->timeout_work);
+			trf7970a_drain_fifo(trf, status);
+		} else if (status & TRF7970A_IRQ_STATUS_FIFO) {
+			ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS,
+					    &fifo_bytes);
+
+			fifo_bytes &= ~TRF7970A_FIFO_STATUS_OVERFLOW;
+
+			if (ret)
+				trf7970a_send_err_upstream(trf, ret);
+			else if (!fifo_bytes)
+				trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+		} else if ((status == TRF7970A_IRQ_STATUS_TX) ||
+			   (!trf->is_initiator &&
+			    (status == (TRF7970A_IRQ_STATUS_TX |
+					TRF7970A_IRQ_STATUS_NFC_RF)))) {
+			trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+
+			if (!trf->timeout) {
+				trf->ignore_timeout =
+				    !cancel_delayed_work(&trf->timeout_work);
+				trf->rx_skb = ERR_PTR(0);
+				trf7970a_send_upstream(trf);
+				break;
+			}
+
+			if (trf->is_initiator)
+				break;
+
+			iso_ctrl = trf->iso_ctrl;
+
+			switch (trf->framing) {
+			case NFC_DIGITAL_FRAMING_NFCA_STANDARD:
+				trf->tx_cmd = TRF7970A_CMD_TRANSMIT_NO_CRC;
+				iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+				trf->iso_ctrl = 0xff; /* Force ISO_CTRL write */
+				break;
+			case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A:
+				trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+				iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N;
+				trf->iso_ctrl = 0xff; /* Force ISO_CTRL write */
+				break;
+			case NFC_DIGITAL_FRAMING_NFCA_ANTICOL_COMPLETE:
+				ret = trf7970a_write(trf,
+					 TRF7970A_SPECIAL_FCN_REG1,
+					 TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL);
+				if (ret)
+					goto err_unlock_exit;
+
+				trf->special_fcn_reg1 =
+				    TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL;
+				break;
+			default:
+				break;
+			}
+
+			if (iso_ctrl != trf->iso_ctrl) {
+				ret = trf7970a_write(trf, TRF7970A_ISO_CTRL,
+						     iso_ctrl);
+				if (ret)
+					goto err_unlock_exit;
+
+				trf->iso_ctrl = iso_ctrl;
+			}
+		} else {
+			trf7970a_send_err_upstream(trf, -EIO);
+		}
+		break;
+	case TRF7970A_ST_WAIT_TO_ISSUE_EOF:
+		if (status != TRF7970A_IRQ_STATUS_TX)
+			trf7970a_send_err_upstream(trf, -EIO);
+		break;
+	case TRF7970A_ST_LISTENING:
+		if (status & TRF7970A_IRQ_STATUS_SRX) {
+			trf->ignore_timeout =
+			    !cancel_delayed_work(&trf->timeout_work);
+			trf7970a_drain_fifo(trf, status);
+		} else if (!(status & TRF7970A_IRQ_STATUS_NFC_RF)) {
+			trf7970a_send_err_upstream(trf, -EIO);
+		}
+		break;
+	case TRF7970A_ST_LISTENING_MD:
+		if (status & TRF7970A_IRQ_STATUS_SRX) {
+			trf->ignore_timeout =
+			    !cancel_delayed_work(&trf->timeout_work);
+
+			ret = trf7970a_mode_detect(trf, &trf->md_rf_tech);
+			if (ret) {
+				trf7970a_send_err_upstream(trf, ret);
+			} else {
+				trf->state = TRF7970A_ST_LISTENING;
+				trf7970a_drain_fifo(trf, status);
+			}
+		} else if (!(status & TRF7970A_IRQ_STATUS_NFC_RF)) {
+			trf7970a_send_err_upstream(trf, -EIO);
+		}
+		break;
+	default:
+		dev_err(trf->dev, "%s - Driver in invalid state: %d\n",
+			__func__, trf->state);
+	}
+
+err_unlock_exit:
+	mutex_unlock(&trf->lock);
+	return IRQ_HANDLED;
+}
+
+static void trf7970a_issue_eof(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Issuing EOF\n");
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+	if (ret)
+		trf7970a_send_err_upstream(trf, ret);
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_EOF);
+	if (ret)
+		trf7970a_send_err_upstream(trf, ret);
+
+	trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA;
+
+	dev_dbg(trf->dev, "Setting timeout for %d ms, state: %d\n",
+		trf->timeout, trf->state);
+
+	schedule_delayed_work(&trf->timeout_work,
+			      msecs_to_jiffies(trf->timeout));
+}
+
+static void trf7970a_timeout_work_handler(struct work_struct *work)
+{
+	struct trf7970a *trf = container_of(work, struct trf7970a,
+					    timeout_work.work);
+
+	dev_dbg(trf->dev, "Timeout - state: %d, ignore_timeout: %d\n",
+		trf->state, trf->ignore_timeout);
+
+	mutex_lock(&trf->lock);
+
+	if (trf->ignore_timeout)
+		trf->ignore_timeout = false;
+	else if (trf->state == TRF7970A_ST_WAIT_FOR_RX_DATA_CONT)
+		trf7970a_drain_fifo(trf, TRF7970A_IRQ_STATUS_SRX);
+	else if (trf->state == TRF7970A_ST_WAIT_TO_ISSUE_EOF)
+		trf7970a_issue_eof(trf);
+	else
+		trf7970a_send_err_upstream(trf, -ETIMEDOUT);
+
+	mutex_unlock(&trf->lock);
+}
+
+static int trf7970a_init(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Initializing device - state: %d\n", trf->state);
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_SOFT_INIT);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_IDLE);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_write(trf, TRF7970A_REG_IO_CTRL,
+			     trf->io_ctrl | TRF7970A_REG_IO_CTRL_VRS(0x1));
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL, 0);
+	if (ret)
+		goto err_out;
+
+	usleep_range(1000, 2000);
+
+	trf->chip_status_ctrl &= ~TRF7970A_CHIP_STATUS_RF_ON;
+
+	ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL,
+			     trf->modulator_sys_clk_ctrl);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_write(trf, TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS,
+			     TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96 |
+			     TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_write(trf, TRF7970A_SPECIAL_FCN_REG1, 0);
+	if (ret)
+		goto err_out;
+
+	trf->special_fcn_reg1 = 0;
+
+	trf->iso_ctrl = 0xff;
+	return 0;
+
+err_out:
+	dev_dbg(trf->dev, "Couldn't init device: %d\n", ret);
+	return ret;
+}
+
+static void trf7970a_switch_rf_off(struct trf7970a *trf)
+{
+	if ((trf->state == TRF7970A_ST_PWR_OFF) ||
+	    (trf->state == TRF7970A_ST_RF_OFF))
+		return;
+
+	dev_dbg(trf->dev, "Switching rf off\n");
+
+	trf->chip_status_ctrl &= ~TRF7970A_CHIP_STATUS_RF_ON;
+
+	trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL, trf->chip_status_ctrl);
+
+	trf->aborting = false;
+	trf->state = TRF7970A_ST_RF_OFF;
+
+	pm_runtime_mark_last_busy(trf->dev);
+	pm_runtime_put_autosuspend(trf->dev);
+}
+
+static int trf7970a_switch_rf_on(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Switching rf on\n");
+
+	pm_runtime_get_sync(trf->dev);
+
+	if (trf->state != TRF7970A_ST_RF_OFF) {	/* Power on, RF off */
+		dev_err(trf->dev, "%s - Incorrect state: %d\n", __func__,
+			trf->state);
+		return -EINVAL;
+	}
+
+	ret = trf7970a_init(trf);
+	if (ret) {
+		dev_err(trf->dev, "%s - Can't initialize: %d\n", __func__, ret);
+		return ret;
+	}
+
+	trf->state = TRF7970A_ST_IDLE;
+
+	return 0;
+}
+
+static int trf7970a_switch_rf(struct nfc_digital_dev *ddev, bool on)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret = 0;
+
+	dev_dbg(trf->dev, "Switching RF - state: %d, on: %d\n", trf->state, on);
+
+	mutex_lock(&trf->lock);
+
+	if (on) {
+		switch (trf->state) {
+		case TRF7970A_ST_PWR_OFF:
+		case TRF7970A_ST_RF_OFF:
+			ret = trf7970a_switch_rf_on(trf);
+			break;
+		case TRF7970A_ST_IDLE:
+		case TRF7970A_ST_IDLE_RX_BLOCKED:
+			break;
+		default:
+			dev_err(trf->dev, "%s - Invalid request: %d %d\n",
+				__func__, trf->state, on);
+			trf7970a_switch_rf_off(trf);
+			ret = -EINVAL;
+		}
+	} else {
+		switch (trf->state) {
+		case TRF7970A_ST_PWR_OFF:
+		case TRF7970A_ST_RF_OFF:
+			break;
+		default:
+			dev_err(trf->dev, "%s - Invalid request: %d %d\n",
+				__func__, trf->state, on);
+			ret = -EINVAL;
+			/* FALLTHROUGH */
+		case TRF7970A_ST_IDLE:
+		case TRF7970A_ST_IDLE_RX_BLOCKED:
+		case TRF7970A_ST_WAIT_FOR_RX_DATA:
+		case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
+			trf7970a_switch_rf_off(trf);
+		}
+	}
+
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_in_config_rf_tech(struct trf7970a *trf, int tech)
+{
+	int ret = 0;
+
+	dev_dbg(trf->dev, "rf technology: %d\n", tech);
+
+	switch (tech) {
+	case NFC_DIGITAL_RF_TECH_106A:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_14443A_106;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_OOK;
+		trf->guard_time = TRF7970A_GUARD_TIME_NFCA;
+		break;
+	case NFC_DIGITAL_RF_TECH_106B:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_14443B_106;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_ASK10;
+		trf->guard_time = TRF7970A_GUARD_TIME_NFCB;
+		break;
+	case NFC_DIGITAL_RF_TECH_212F:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_FELICA_212;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_ASK10;
+		trf->guard_time = TRF7970A_GUARD_TIME_NFCF;
+		break;
+	case NFC_DIGITAL_RF_TECH_424F:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_FELICA_424;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_ASK10;
+		trf->guard_time = TRF7970A_GUARD_TIME_NFCF;
+		break;
+	case NFC_DIGITAL_RF_TECH_ISO15693:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_OOK;
+		trf->guard_time = TRF7970A_GUARD_TIME_15693;
+		break;
+	default:
+		dev_dbg(trf->dev, "Unsupported rf technology: %d\n", tech);
+		return -EINVAL;
+	}
+
+	trf->technology = tech;
+
+	/* If in initiator mode and not changing the RF tech due to a
+	 * PSL sequence (indicated by 'trf->iso_ctrl == 0xff' from
+	 * trf7970a_init()), clear the NFC Target Detection Level register
+	 * due to erratum.
+	 */
+	if (trf->iso_ctrl == 0xff)
+		ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL, 0);
+
+	return ret;
+}
+
+static int trf7970a_is_rf_field(struct trf7970a *trf, bool *is_rf_field)
+{
+	int ret;
+	u8 rssi;
+
+	ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL,
+			     trf->chip_status_ctrl |
+			     TRF7970A_CHIP_STATUS_REC_ON);
+	if (ret)
+		return ret;
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_TEST_EXT_RF);
+	if (ret)
+		return ret;
+
+	usleep_range(50, 60);
+
+	ret = trf7970a_read(trf, TRF7970A_RSSI_OSC_STATUS, &rssi);
+	if (ret)
+		return ret;
+
+	ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL,
+			     trf->chip_status_ctrl);
+	if (ret)
+		return ret;
+
+	if (rssi & TRF7970A_RSSI_OSC_STATUS_RSSI_MASK)
+		*is_rf_field = true;
+	else
+		*is_rf_field = false;
+
+	return 0;
+}
+
+static int trf7970a_in_config_framing(struct trf7970a *trf, int framing)
+{
+	u8 iso_ctrl = trf->iso_ctrl_tech;
+	bool is_rf_field = false;
+	int ret;
+
+	dev_dbg(trf->dev, "framing: %d\n", framing);
+
+	switch (framing) {
+	case NFC_DIGITAL_FRAMING_NFCA_SHORT:
+	case NFC_DIGITAL_FRAMING_NFCA_STANDARD:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT_NO_CRC;
+		iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A:
+	case NFC_DIGITAL_FRAMING_NFCA_T4T:
+	case NFC_DIGITAL_FRAMING_NFCB:
+	case NFC_DIGITAL_FRAMING_NFCB_T4T:
+	case NFC_DIGITAL_FRAMING_NFCF:
+	case NFC_DIGITAL_FRAMING_NFCF_T3T:
+	case NFC_DIGITAL_FRAMING_ISO15693_INVENTORY:
+	case NFC_DIGITAL_FRAMING_ISO15693_T5T:
+	case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP:
+	case NFC_DIGITAL_FRAMING_NFCF_NFC_DEP:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+		iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	case NFC_DIGITAL_FRAMING_NFCA_T2T:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+		iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	default:
+		dev_dbg(trf->dev, "Unsupported Framing: %d\n", framing);
+		return -EINVAL;
+	}
+
+	trf->framing = framing;
+
+	if (!(trf->chip_status_ctrl & TRF7970A_CHIP_STATUS_RF_ON)) {
+		ret = trf7970a_is_rf_field(trf, &is_rf_field);
+		if (ret)
+			return ret;
+
+		if (is_rf_field)
+			return -EBUSY;
+	}
+
+	if (iso_ctrl != trf->iso_ctrl) {
+		ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, iso_ctrl);
+		if (ret)
+			return ret;
+
+		trf->iso_ctrl = iso_ctrl;
+
+		ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL,
+				     trf->modulator_sys_clk_ctrl);
+		if (ret)
+			return ret;
+	}
+
+	if (!(trf->chip_status_ctrl & TRF7970A_CHIP_STATUS_RF_ON)) {
+		ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL,
+				     trf->chip_status_ctrl |
+				     TRF7970A_CHIP_STATUS_RF_ON);
+		if (ret)
+			return ret;
+
+		trf->chip_status_ctrl |= TRF7970A_CHIP_STATUS_RF_ON;
+
+		usleep_range(trf->guard_time, trf->guard_time + 1000);
+	}
+
+	return 0;
+}
+
+static int trf7970a_in_configure_hw(struct nfc_digital_dev *ddev, int type,
+				    int param)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret;
+
+	dev_dbg(trf->dev, "Configure hw - type: %d, param: %d\n", type, param);
+
+	mutex_lock(&trf->lock);
+
+	trf->is_initiator = true;
+
+	if ((trf->state == TRF7970A_ST_PWR_OFF) ||
+	    (trf->state == TRF7970A_ST_RF_OFF)) {
+		ret = trf7970a_switch_rf_on(trf);
+		if (ret)
+			goto err_unlock;
+	}
+
+	switch (type) {
+	case NFC_DIGITAL_CONFIG_RF_TECH:
+		ret = trf7970a_in_config_rf_tech(trf, param);
+		break;
+	case NFC_DIGITAL_CONFIG_FRAMING:
+		ret = trf7970a_in_config_framing(trf, param);
+		break;
+	default:
+		dev_dbg(trf->dev, "Unknown type: %d\n", type);
+		ret = -EINVAL;
+	}
+
+err_unlock:
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_is_iso15693_write_or_lock(u8 cmd)
+{
+	switch (cmd) {
+	case ISO15693_CMD_WRITE_SINGLE_BLOCK:
+	case ISO15693_CMD_LOCK_BLOCK:
+	case ISO15693_CMD_WRITE_MULTIPLE_BLOCK:
+	case ISO15693_CMD_WRITE_AFI:
+	case ISO15693_CMD_LOCK_AFI:
+	case ISO15693_CMD_WRITE_DSFID:
+	case ISO15693_CMD_LOCK_DSFID:
+		return 1;
+		break;
+	default:
+		return 0;
+	}
+}
+
+static int trf7970a_per_cmd_config(struct trf7970a *trf, struct sk_buff *skb)
+{
+	u8 *req = skb->data;
+	u8 special_fcn_reg1, iso_ctrl;
+	int ret;
+
+	trf->issue_eof = false;
+
+	/* When issuing Type 2 read command, make sure the '4_bit_RX' bit in
+	 * special functions register 1 is cleared; otherwise, its a write or
+	 * sector select command and '4_bit_RX' must be set.
+	 *
+	 * When issuing an ISO 15693 command, inspect the flags byte to see
+	 * what speed to use.  Also, remember if the OPTION flag is set on
+	 * a Type 5 write or lock command so the driver will know that it
+	 * has to send an EOF in order to get a response.
+	 */
+	if ((trf->technology == NFC_DIGITAL_RF_TECH_106A) &&
+	    (trf->framing == NFC_DIGITAL_FRAMING_NFCA_T2T)) {
+		if (req[0] == NFC_T2T_CMD_READ)
+			special_fcn_reg1 = 0;
+		else
+			special_fcn_reg1 = TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX;
+
+		if (special_fcn_reg1 != trf->special_fcn_reg1) {
+			ret = trf7970a_write(trf, TRF7970A_SPECIAL_FCN_REG1,
+					     special_fcn_reg1);
+			if (ret)
+				return ret;
+
+			trf->special_fcn_reg1 = special_fcn_reg1;
+		}
+	} else if (trf->technology == NFC_DIGITAL_RF_TECH_ISO15693) {
+		iso_ctrl = trf->iso_ctrl & ~TRF7970A_ISO_CTRL_RFID_SPEED_MASK;
+
+		switch (req[0] & ISO15693_REQ_FLAG_SPEED_MASK) {
+		case 0x00:
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_SGL_1OF4_662;
+			break;
+		case ISO15693_REQ_FLAG_SUB_CARRIER:
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a;
+			break;
+		case ISO15693_REQ_FLAG_DATA_RATE:
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648;
+			break;
+		case (ISO15693_REQ_FLAG_SUB_CARRIER |
+		      ISO15693_REQ_FLAG_DATA_RATE):
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669;
+			break;
+		}
+
+		if (iso_ctrl != trf->iso_ctrl) {
+			ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, iso_ctrl);
+			if (ret)
+				return ret;
+
+			trf->iso_ctrl = iso_ctrl;
+		}
+
+		if ((trf->framing == NFC_DIGITAL_FRAMING_ISO15693_T5T) &&
+		    trf7970a_is_iso15693_write_or_lock(req[1]) &&
+		    (req[0] & ISO15693_REQ_FLAG_OPTION))
+			trf->issue_eof = true;
+	}
+
+	return 0;
+}
+
+static int trf7970a_send_cmd(struct nfc_digital_dev *ddev,
+			     struct sk_buff *skb, u16 timeout,
+			     nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	u8 prefix[5];
+	unsigned int len;
+	int ret;
+	u8 status;
+
+	dev_dbg(trf->dev, "New request - state: %d, timeout: %d ms, len: %d\n",
+		trf->state, timeout, skb->len);
+
+	if (skb->len > TRF7970A_TX_MAX)
+		return -EINVAL;
+
+	mutex_lock(&trf->lock);
+
+	if ((trf->state != TRF7970A_ST_IDLE) &&
+	    (trf->state != TRF7970A_ST_IDLE_RX_BLOCKED)) {
+		dev_err(trf->dev, "%s - Bogus state: %d\n", __func__,
+			trf->state);
+		ret = -EIO;
+		goto out_err;
+	}
+
+	if (trf->aborting) {
+		dev_dbg(trf->dev, "Abort process complete\n");
+		trf->aborting = false;
+		ret = -ECANCELED;
+		goto out_err;
+	}
+
+	if (timeout) {
+		trf->rx_skb = nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE,
+						 GFP_KERNEL);
+		if (!trf->rx_skb) {
+			dev_dbg(trf->dev, "Can't alloc rx_skb\n");
+			ret = -ENOMEM;
+			goto out_err;
+		}
+	}
+
+	if (trf->state == TRF7970A_ST_IDLE_RX_BLOCKED) {
+		ret = trf7970a_cmd(trf, TRF7970A_CMD_ENABLE_RX);
+		if (ret)
+			goto out_err;
+
+		trf->state = TRF7970A_ST_IDLE;
+	}
+
+	if (trf->is_initiator) {
+		ret = trf7970a_per_cmd_config(trf, skb);
+		if (ret)
+			goto out_err;
+	}
+
+	trf->ddev = ddev;
+	trf->tx_skb = skb;
+	trf->cb = cb;
+	trf->cb_arg = arg;
+	trf->timeout = timeout;
+	trf->ignore_timeout = false;
+
+	len = skb->len;
+
+	/* TX data must be prefixed with a FIFO reset cmd, a cmd that depends
+	 * on what the current framing is, the address of the TX length byte 1
+	 * register (0x1d), and the 2 byte length of the data to be transmitted.
+	 * That totals 5 bytes.
+	 */
+	prefix[0] = TRF7970A_CMD_BIT_CTRL |
+	    TRF7970A_CMD_BIT_OPCODE(TRF7970A_CMD_FIFO_RESET);
+	prefix[1] = TRF7970A_CMD_BIT_CTRL |
+	    TRF7970A_CMD_BIT_OPCODE(trf->tx_cmd);
+	prefix[2] = TRF7970A_CMD_BIT_CONTINUOUS | TRF7970A_TX_LENGTH_BYTE1;
+
+	if (trf->framing == NFC_DIGITAL_FRAMING_NFCA_SHORT) {
+		prefix[3] = 0x00;
+		prefix[4] = 0x0f;	/* 7 bits */
+	} else {
+		prefix[3] = (len & 0xf00) >> 4;
+		prefix[3] |= ((len & 0xf0) >> 4);
+		prefix[4] = ((len & 0x0f) << 4);
+	}
+
+	len = min_t(int, skb->len, TRF7970A_FIFO_SIZE);
+
+	/* Clear possible spurious interrupt */
+	ret = trf7970a_read_irqstatus(trf, &status);
+	if (ret)
+		goto out_err;
+
+	ret = trf7970a_transmit(trf, skb, len, prefix, sizeof(prefix));
+	if (ret) {
+		kfree_skb(trf->rx_skb);
+		trf->rx_skb = NULL;
+	}
+
+out_err:
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_tg_config_rf_tech(struct trf7970a *trf, int tech)
+{
+	int ret = 0;
+
+	dev_dbg(trf->dev, "rf technology: %d\n", tech);
+
+	switch (tech) {
+	case NFC_DIGITAL_RF_TECH_106A:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE |
+		    TRF7970A_ISO_CTRL_NFC_CE | TRF7970A_ISO_CTRL_NFC_CE_14443A;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_OOK;
+		break;
+	case NFC_DIGITAL_RF_TECH_212F:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE |
+		    TRF7970A_ISO_CTRL_NFC_NFCF_212;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_ASK10;
+		break;
+	case NFC_DIGITAL_RF_TECH_424F:
+		trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE |
+		    TRF7970A_ISO_CTRL_NFC_NFCF_424;
+		trf->modulator_sys_clk_ctrl =
+		    (trf->modulator_sys_clk_ctrl & 0xf8) |
+		    TRF7970A_MODULATOR_DEPTH_ASK10;
+		break;
+	default:
+		dev_dbg(trf->dev, "Unsupported rf technology: %d\n", tech);
+		return -EINVAL;
+	}
+
+	trf->technology = tech;
+
+	/* Normally we write the ISO_CTRL register in
+	 * trf7970a_tg_config_framing() because the framing can change
+	 * the value written.  However, when sending a PSL RES,
+	 * digital_tg_send_psl_res_complete() doesn't call
+	 * trf7970a_tg_config_framing() so we must write the register
+	 * here.
+	 */
+	if ((trf->framing == NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED) &&
+	    (trf->iso_ctrl_tech != trf->iso_ctrl)) {
+		ret = trf7970a_write(trf, TRF7970A_ISO_CTRL,
+				     trf->iso_ctrl_tech);
+
+		trf->iso_ctrl = trf->iso_ctrl_tech;
+	}
+
+	return ret;
+}
+
+/* Since this is a target routine, several of the framing calls are
+ * made between receiving the request and sending the response so they
+ * should take effect until after the response is sent.  This is accomplished
+ * by skipping the ISO_CTRL register write here and doing it in the interrupt
+ * handler.
+ */
+static int trf7970a_tg_config_framing(struct trf7970a *trf, int framing)
+{
+	u8 iso_ctrl = trf->iso_ctrl_tech;
+	int ret;
+
+	dev_dbg(trf->dev, "framing: %d\n", framing);
+
+	switch (framing) {
+	case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT_NO_CRC;
+		iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	case NFC_DIGITAL_FRAMING_NFCA_STANDARD:
+	case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A:
+	case NFC_DIGITAL_FRAMING_NFCA_ANTICOL_COMPLETE:
+		/* These ones are applied in the interrupt handler */
+		iso_ctrl = trf->iso_ctrl; /* Don't write to ISO_CTRL yet */
+		break;
+	case NFC_DIGITAL_FRAMING_NFCF_NFC_DEP:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+		iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	case NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+		iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	default:
+		dev_dbg(trf->dev, "Unsupported Framing: %d\n", framing);
+		return -EINVAL;
+	}
+
+	trf->framing = framing;
+
+	if (iso_ctrl != trf->iso_ctrl) {
+		ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, iso_ctrl);
+		if (ret)
+			return ret;
+
+		trf->iso_ctrl = iso_ctrl;
+
+		ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL,
+				     trf->modulator_sys_clk_ctrl);
+		if (ret)
+			return ret;
+	}
+
+	if (!(trf->chip_status_ctrl & TRF7970A_CHIP_STATUS_RF_ON)) {
+		ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL,
+				     trf->chip_status_ctrl |
+				     TRF7970A_CHIP_STATUS_RF_ON);
+		if (ret)
+			return ret;
+
+		trf->chip_status_ctrl |= TRF7970A_CHIP_STATUS_RF_ON;
+	}
+
+	return 0;
+}
+
+static int trf7970a_tg_configure_hw(struct nfc_digital_dev *ddev, int type,
+				    int param)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret;
+
+	dev_dbg(trf->dev, "Configure hw - type: %d, param: %d\n", type, param);
+
+	mutex_lock(&trf->lock);
+
+	trf->is_initiator = false;
+
+	if ((trf->state == TRF7970A_ST_PWR_OFF) ||
+	    (trf->state == TRF7970A_ST_RF_OFF)) {
+		ret = trf7970a_switch_rf_on(trf);
+		if (ret)
+			goto err_unlock;
+	}
+
+	switch (type) {
+	case NFC_DIGITAL_CONFIG_RF_TECH:
+		ret = trf7970a_tg_config_rf_tech(trf, param);
+		break;
+	case NFC_DIGITAL_CONFIG_FRAMING:
+		ret = trf7970a_tg_config_framing(trf, param);
+		break;
+	default:
+		dev_dbg(trf->dev, "Unknown type: %d\n", type);
+		ret = -EINVAL;
+	}
+
+err_unlock:
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int _trf7970a_tg_listen(struct nfc_digital_dev *ddev, u16 timeout,
+			       nfc_digital_cmd_complete_t cb, void *arg,
+			       bool mode_detect)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret;
+
+	mutex_lock(&trf->lock);
+
+	if ((trf->state != TRF7970A_ST_IDLE) &&
+	    (trf->state != TRF7970A_ST_IDLE_RX_BLOCKED)) {
+		dev_err(trf->dev, "%s - Bogus state: %d\n", __func__,
+			trf->state);
+		ret = -EIO;
+		goto out_err;
+	}
+
+	if (trf->aborting) {
+		dev_dbg(trf->dev, "Abort process complete\n");
+		trf->aborting = false;
+		ret = -ECANCELED;
+		goto out_err;
+	}
+
+	trf->rx_skb = nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE,
+					 GFP_KERNEL);
+	if (!trf->rx_skb) {
+		dev_dbg(trf->dev, "Can't alloc rx_skb\n");
+		ret = -ENOMEM;
+		goto out_err;
+	}
+
+	ret = trf7970a_write(trf, TRF7970A_RX_SPECIAL_SETTINGS,
+			     TRF7970A_RX_SPECIAL_SETTINGS_HBT |
+			     TRF7970A_RX_SPECIAL_SETTINGS_M848 |
+			     TRF7970A_RX_SPECIAL_SETTINGS_C424 |
+			     TRF7970A_RX_SPECIAL_SETTINGS_C212);
+	if (ret)
+		goto out_err;
+
+	ret = trf7970a_write(trf, TRF7970A_REG_IO_CTRL,
+			     trf->io_ctrl | TRF7970A_REG_IO_CTRL_VRS(0x1));
+	if (ret)
+		goto out_err;
+
+	ret = trf7970a_write(trf, TRF7970A_NFC_LOW_FIELD_LEVEL,
+			     TRF7970A_NFC_LOW_FIELD_LEVEL_RFDET(0x3));
+	if (ret)
+		goto out_err;
+
+	ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL,
+			     TRF7970A_NFC_TARGET_LEVEL_RFDET(0x7));
+	if (ret)
+		goto out_err;
+
+	trf->ddev = ddev;
+	trf->cb = cb;
+	trf->cb_arg = arg;
+	trf->timeout = timeout;
+	trf->ignore_timeout = false;
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_ENABLE_RX);
+	if (ret)
+		goto out_err;
+
+	trf->state = mode_detect ? TRF7970A_ST_LISTENING_MD :
+				   TRF7970A_ST_LISTENING;
+
+	schedule_delayed_work(&trf->timeout_work, msecs_to_jiffies(timeout));
+
+out_err:
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_tg_listen(struct nfc_digital_dev *ddev, u16 timeout,
+			      nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+
+	dev_dbg(trf->dev, "Listen - state: %d, timeout: %d ms\n",
+		trf->state, timeout);
+
+	return _trf7970a_tg_listen(ddev, timeout, cb, arg, false);
+}
+
+static int trf7970a_tg_listen_md(struct nfc_digital_dev *ddev,
+				 u16 timeout, nfc_digital_cmd_complete_t cb,
+				 void *arg)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret;
+
+	dev_dbg(trf->dev, "Listen MD - state: %d, timeout: %d ms\n",
+		trf->state, timeout);
+
+	ret = trf7970a_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_RF_TECH,
+				       NFC_DIGITAL_RF_TECH_106A);
+	if (ret)
+		return ret;
+
+	ret = trf7970a_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_FRAMING,
+				       NFC_DIGITAL_FRAMING_NFCA_NFC_DEP);
+	if (ret)
+		return ret;
+
+	return _trf7970a_tg_listen(ddev, timeout, cb, arg, true);
+}
+
+static int trf7970a_tg_get_rf_tech(struct nfc_digital_dev *ddev, u8 *rf_tech)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+
+	dev_dbg(trf->dev, "Get RF Tech - state: %d, rf_tech: %d\n",
+		trf->state, trf->md_rf_tech);
+
+	*rf_tech = trf->md_rf_tech;
+
+	return 0;
+}
+
+static void trf7970a_abort_cmd(struct nfc_digital_dev *ddev)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+
+	dev_dbg(trf->dev, "Abort process initiated\n");
+
+	mutex_lock(&trf->lock);
+
+	switch (trf->state) {
+	case TRF7970A_ST_WAIT_FOR_TX_FIFO:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
+	case TRF7970A_ST_WAIT_TO_ISSUE_EOF:
+		trf->aborting = true;
+		break;
+	case TRF7970A_ST_LISTENING:
+		trf->ignore_timeout = !cancel_delayed_work(&trf->timeout_work);
+		trf7970a_send_err_upstream(trf, -ECANCELED);
+		dev_dbg(trf->dev, "Abort process complete\n");
+		break;
+	default:
+		break;
+	}
+
+	mutex_unlock(&trf->lock);
+}
+
+static struct nfc_digital_ops trf7970a_nfc_ops = {
+	.in_configure_hw	= trf7970a_in_configure_hw,
+	.in_send_cmd		= trf7970a_send_cmd,
+	.tg_configure_hw	= trf7970a_tg_configure_hw,
+	.tg_send_cmd		= trf7970a_send_cmd,
+	.tg_listen		= trf7970a_tg_listen,
+	.tg_listen_md		= trf7970a_tg_listen_md,
+	.tg_get_rf_tech		= trf7970a_tg_get_rf_tech,
+	.switch_rf		= trf7970a_switch_rf,
+	.abort_cmd		= trf7970a_abort_cmd,
+};
+
+static int trf7970a_power_up(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Powering up - state: %d\n", trf->state);
+
+	if (trf->state != TRF7970A_ST_PWR_OFF)
+		return 0;
+
+	ret = regulator_enable(trf->regulator);
+	if (ret) {
+		dev_err(trf->dev, "%s - Can't enable VIN: %d\n", __func__, ret);
+		return ret;
+	}
+
+	usleep_range(5000, 6000);
+
+	if (trf->en2_gpiod &&
+	    !(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) {
+		gpiod_set_value_cansleep(trf->en2_gpiod, 1);
+		usleep_range(1000, 2000);
+	}
+
+	gpiod_set_value_cansleep(trf->en_gpiod, 1);
+
+	usleep_range(20000, 21000);
+
+	trf->state = TRF7970A_ST_RF_OFF;
+
+	return 0;
+}
+
+static int trf7970a_power_down(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Powering down - state: %d\n", trf->state);
+
+	if (trf->state == TRF7970A_ST_PWR_OFF)
+		return 0;
+
+	if (trf->state != TRF7970A_ST_RF_OFF) {
+		dev_dbg(trf->dev, "Can't power down - not RF_OFF state (%d)\n",
+			trf->state);
+		return -EBUSY;
+	}
+
+	gpiod_set_value_cansleep(trf->en_gpiod, 0);
+
+	if (trf->en2_gpiod && !(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW))
+		gpiod_set_value_cansleep(trf->en2_gpiod, 0);
+
+	ret = regulator_disable(trf->regulator);
+	if (ret)
+		dev_err(trf->dev, "%s - Can't disable VIN: %d\n", __func__,
+			ret);
+
+	trf->state = TRF7970A_ST_PWR_OFF;
+
+	return ret;
+}
+
+static int trf7970a_startup(struct trf7970a *trf)
+{
+	int ret;
+
+	ret = trf7970a_power_up(trf);
+	if (ret)
+		return ret;
+
+	pm_runtime_set_active(trf->dev);
+	pm_runtime_enable(trf->dev);
+	pm_runtime_mark_last_busy(trf->dev);
+
+	return 0;
+}
+
+static void trf7970a_shutdown(struct trf7970a *trf)
+{
+	switch (trf->state) {
+	case TRF7970A_ST_WAIT_FOR_TX_FIFO:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
+	case TRF7970A_ST_WAIT_TO_ISSUE_EOF:
+	case TRF7970A_ST_LISTENING:
+		trf7970a_send_err_upstream(trf, -ECANCELED);
+		/* FALLTHROUGH */
+	case TRF7970A_ST_IDLE:
+	case TRF7970A_ST_IDLE_RX_BLOCKED:
+		trf7970a_switch_rf_off(trf);
+		break;
+	default:
+		break;
+	}
+
+	pm_runtime_disable(trf->dev);
+	pm_runtime_set_suspended(trf->dev);
+
+	trf7970a_power_down(trf);
+}
+
+static int trf7970a_get_autosuspend_delay(struct device_node *np)
+{
+	int autosuspend_delay, ret;
+
+	ret = of_property_read_u32(np, "autosuspend-delay", &autosuspend_delay);
+	if (ret)
+		autosuspend_delay = TRF7970A_AUTOSUSPEND_DELAY;
+
+	return autosuspend_delay;
+}
+
+static int trf7970a_probe(struct spi_device *spi)
+{
+	struct device_node *np = spi->dev.of_node;
+	struct trf7970a *trf;
+	int uvolts, autosuspend_delay, ret;
+	u32 clk_freq = TRF7970A_13MHZ_CLOCK_FREQUENCY;
+
+	if (!np) {
+		dev_err(&spi->dev, "No Device Tree entry\n");
+		return -EINVAL;
+	}
+
+	trf = devm_kzalloc(&spi->dev, sizeof(*trf), GFP_KERNEL);
+	if (!trf)
+		return -ENOMEM;
+
+	trf->state = TRF7970A_ST_PWR_OFF;
+	trf->dev = &spi->dev;
+	trf->spi = spi;
+
+	spi->mode = SPI_MODE_1;
+	spi->bits_per_word = 8;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(trf->dev, "Can't set up SPI Communication\n");
+		return ret;
+	}
+
+	if (of_property_read_bool(np, "irq-status-read-quirk"))
+		trf->quirks |= TRF7970A_QUIRK_IRQ_STATUS_READ;
+
+	/* There are two enable pins - only EN must be present in the DT */
+	trf->en_gpiod = devm_gpiod_get_index(trf->dev, "ti,enable", 0,
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(trf->en_gpiod)) {
+		dev_err(trf->dev, "No EN GPIO property\n");
+		return PTR_ERR(trf->en_gpiod);
+	}
+
+	trf->en2_gpiod = devm_gpiod_get_index_optional(trf->dev, "ti,enable", 1,
+						       GPIOD_OUT_LOW);
+	if (!trf->en2_gpiod) {
+		dev_info(trf->dev, "No EN2 GPIO property\n");
+	} else if (IS_ERR(trf->en2_gpiod)) {
+		dev_err(trf->dev, "Error getting EN2 GPIO property: %ld\n",
+			PTR_ERR(trf->en2_gpiod));
+		return PTR_ERR(trf->en2_gpiod);
+	} else if (of_property_read_bool(np, "en2-rf-quirk")) {
+		trf->quirks |= TRF7970A_QUIRK_EN2_MUST_STAY_LOW;
+	}
+
+	of_property_read_u32(np, "clock-frequency", &clk_freq);
+	if ((clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) &&
+	    (clk_freq != TRF7970A_13MHZ_CLOCK_FREQUENCY)) {
+		dev_err(trf->dev,
+			"clock-frequency (%u Hz) unsupported\n", clk_freq);
+		return -EINVAL;
+	}
+
+	if (clk_freq == TRF7970A_27MHZ_CLOCK_FREQUENCY) {
+		trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_27MHZ;
+		dev_dbg(trf->dev, "trf7970a configured for 27MHz crystal\n");
+	} else {
+		trf->modulator_sys_clk_ctrl = 0;
+	}
+
+	ret = devm_request_threaded_irq(trf->dev, spi->irq, NULL,
+					trf7970a_irq,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"trf7970a", trf);
+	if (ret) {
+		dev_err(trf->dev, "Can't request IRQ#%d: %d\n", spi->irq, ret);
+		return ret;
+	}
+
+	mutex_init(&trf->lock);
+	INIT_DELAYED_WORK(&trf->timeout_work, trf7970a_timeout_work_handler);
+
+	trf->regulator = devm_regulator_get(&spi->dev, "vin");
+	if (IS_ERR(trf->regulator)) {
+		ret = PTR_ERR(trf->regulator);
+		dev_err(trf->dev, "Can't get VIN regulator: %d\n", ret);
+		goto err_destroy_lock;
+	}
+
+	ret = regulator_enable(trf->regulator);
+	if (ret) {
+		dev_err(trf->dev, "Can't enable VIN: %d\n", ret);
+		goto err_destroy_lock;
+	}
+
+	uvolts = regulator_get_voltage(trf->regulator);
+	if (uvolts > 4000000)
+		trf->chip_status_ctrl = TRF7970A_CHIP_STATUS_VRS5_3;
+
+	trf->regulator = devm_regulator_get(&spi->dev, "vdd-io");
+	if (IS_ERR(trf->regulator)) {
+		ret = PTR_ERR(trf->regulator);
+		dev_err(trf->dev, "Can't get VDD_IO regulator: %d\n", ret);
+		goto err_destroy_lock;
+	}
+
+	ret = regulator_enable(trf->regulator);
+	if (ret) {
+		dev_err(trf->dev, "Can't enable VDD_IO: %d\n", ret);
+		goto err_destroy_lock;
+	}
+
+	if (regulator_get_voltage(trf->regulator) == 1800000) {
+		trf->io_ctrl = TRF7970A_REG_IO_CTRL_IO_LOW;
+		dev_dbg(trf->dev, "trf7970a config vdd_io to 1.8V\n");
+	}
+
+	trf->ddev = nfc_digital_allocate_device(&trf7970a_nfc_ops,
+						TRF7970A_SUPPORTED_PROTOCOLS,
+						NFC_DIGITAL_DRV_CAPS_IN_CRC |
+						NFC_DIGITAL_DRV_CAPS_TG_CRC, 0,
+						0);
+	if (!trf->ddev) {
+		dev_err(trf->dev, "Can't allocate NFC digital device\n");
+		ret = -ENOMEM;
+		goto err_disable_regulator;
+	}
+
+	nfc_digital_set_parent_dev(trf->ddev, trf->dev);
+	nfc_digital_set_drvdata(trf->ddev, trf);
+	spi_set_drvdata(spi, trf);
+
+	autosuspend_delay = trf7970a_get_autosuspend_delay(np);
+
+	pm_runtime_set_autosuspend_delay(trf->dev, autosuspend_delay);
+	pm_runtime_use_autosuspend(trf->dev);
+
+	ret = trf7970a_startup(trf);
+	if (ret)
+		goto err_free_ddev;
+
+	ret = nfc_digital_register_device(trf->ddev);
+	if (ret) {
+		dev_err(trf->dev, "Can't register NFC digital device: %d\n",
+			ret);
+		goto err_shutdown;
+	}
+
+	return 0;
+
+err_shutdown:
+	trf7970a_shutdown(trf);
+err_free_ddev:
+	nfc_digital_free_device(trf->ddev);
+err_disable_regulator:
+	regulator_disable(trf->regulator);
+err_destroy_lock:
+	mutex_destroy(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_remove(struct spi_device *spi)
+{
+	struct trf7970a *trf = spi_get_drvdata(spi);
+
+	mutex_lock(&trf->lock);
+
+	trf7970a_shutdown(trf);
+
+	mutex_unlock(&trf->lock);
+
+	nfc_digital_unregister_device(trf->ddev);
+	nfc_digital_free_device(trf->ddev);
+
+	regulator_disable(trf->regulator);
+
+	mutex_destroy(&trf->lock);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int trf7970a_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct trf7970a *trf = spi_get_drvdata(spi);
+
+	dev_dbg(dev, "Suspend\n");
+
+	mutex_lock(&trf->lock);
+
+	trf7970a_shutdown(trf);
+
+	mutex_unlock(&trf->lock);
+
+	return 0;
+}
+
+static int trf7970a_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct trf7970a *trf = spi_get_drvdata(spi);
+	int ret;
+
+	dev_dbg(dev, "Resume\n");
+
+	mutex_lock(&trf->lock);
+
+	ret = trf7970a_startup(trf);
+
+	mutex_unlock(&trf->lock);
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_PM
+static int trf7970a_pm_runtime_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct trf7970a *trf = spi_get_drvdata(spi);
+	int ret;
+
+	dev_dbg(dev, "Runtime suspend\n");
+
+	mutex_lock(&trf->lock);
+
+	ret = trf7970a_power_down(trf);
+
+	mutex_unlock(&trf->lock);
+
+	return ret;
+}
+
+static int trf7970a_pm_runtime_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct trf7970a *trf = spi_get_drvdata(spi);
+	int ret;
+
+	dev_dbg(dev, "Runtime resume\n");
+
+	ret = trf7970a_power_up(trf);
+	if (!ret)
+		pm_runtime_mark_last_busy(dev);
+
+	return ret;
+}
+#endif
+
+static const struct dev_pm_ops trf7970a_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(trf7970a_suspend, trf7970a_resume)
+	SET_RUNTIME_PM_OPS(trf7970a_pm_runtime_suspend,
+			   trf7970a_pm_runtime_resume, NULL)
+};
+
+static const struct of_device_id trf7970a_of_match[] = {
+	{.compatible = "ti,trf7970a",},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, trf7970a_of_match);
+
+static const struct spi_device_id trf7970a_id_table[] = {
+	{"trf7970a", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(spi, trf7970a_id_table);
+
+static struct spi_driver trf7970a_spi_driver = {
+	.probe		= trf7970a_probe,
+	.remove		= trf7970a_remove,
+	.id_table	= trf7970a_id_table,
+	.driver	= {
+		.name		= "trf7970a",
+		.of_match_table	= of_match_ptr(trf7970a_of_match),
+		.pm		= &trf7970a_pm_ops,
+	},
+};
+
+module_spi_driver(trf7970a_spi_driver);
+
+MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI trf7970a RFID/NFC Transceiver Driver");