Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 460 insertions, 0 deletions

diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
new file mode 100644
index 000000000..1255cd1d9
--- /dev/null
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -0,0 +1,460 @@
+// SPDX-Licence-Identifier: GPL-2.0
+/*
+ * STMicroelectronics STM32 USB PHY Controller driver
+ *
+ * Copyright (C) 2018 STMicroelectronics
+ * Author(s): Amelie Delaunay <amelie.delaunay@st.com>.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/reset.h>
+
+#define STM32_USBPHYC_PLL	0x0
+#define STM32_USBPHYC_MISC	0x8
+#define STM32_USBPHYC_VERSION	0x3F4
+
+/* STM32_USBPHYC_PLL bit fields */
+#define PLLNDIV			GENMASK(6, 0)
+#define PLLFRACIN		GENMASK(25, 10)
+#define PLLEN			BIT(26)
+#define PLLSTRB			BIT(27)
+#define PLLSTRBYP		BIT(28)
+#define PLLFRACCTL		BIT(29)
+#define PLLDITHEN0		BIT(30)
+#define PLLDITHEN1		BIT(31)
+
+/* STM32_USBPHYC_MISC bit fields */
+#define SWITHOST		BIT(0)
+
+/* STM32_USBPHYC_VERSION bit fields */
+#define MINREV			GENMASK(3, 0)
+#define MAJREV			GENMASK(7, 4)
+
+static const char * const supplies_names[] = {
+	"vdda1v1",	/* 1V1 */
+	"vdda1v8",	/* 1V8 */
+};
+
+#define NUM_SUPPLIES		ARRAY_SIZE(supplies_names)
+
+#define PLL_LOCK_TIME_US	100
+#define PLL_PWR_DOWN_TIME_US	5
+#define PLL_FVCO_MHZ		2880
+#define PLL_INFF_MIN_RATE_HZ	19200000
+#define PLL_INFF_MAX_RATE_HZ	38400000
+#define HZ_PER_MHZ		1000000L
+
+struct pll_params {
+	u8 ndiv;
+	u16 frac;
+};
+
+struct stm32_usbphyc_phy {
+	struct phy *phy;
+	struct stm32_usbphyc *usbphyc;
+	struct regulator_bulk_data supplies[NUM_SUPPLIES];
+	u32 index;
+	bool active;
+};
+
+struct stm32_usbphyc {
+	struct device *dev;
+	void __iomem *base;
+	struct clk *clk;
+	struct reset_control *rst;
+	struct stm32_usbphyc_phy **phys;
+	int nphys;
+	int switch_setup;
+};
+
+static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits)
+{
+	writel_relaxed(readl_relaxed(reg) | bits, reg);
+}
+
+static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits)
+{
+	writel_relaxed(readl_relaxed(reg) & ~bits, reg);
+}
+
+static void stm32_usbphyc_get_pll_params(u32 clk_rate,
+					 struct pll_params *pll_params)
+{
+	unsigned long long fvco, ndiv, frac;
+
+	/*    _
+	 *   | FVCO = INFF*2*(NDIV + FRACT/2^16) when DITHER_DISABLE[1] = 1
+	 *   | FVCO = 2880MHz
+	 *  <
+	 *   | NDIV = integer part of input bits to set the LDF
+	 *   |_FRACT = fractional part of input bits to set the LDF
+	 *  =>	PLLNDIV = integer part of (FVCO / (INFF*2))
+	 *  =>	PLLFRACIN = fractional part of(FVCO / INFF*2) * 2^16
+	 * <=>  PLLFRACIN = ((FVCO / (INFF*2)) - PLLNDIV) * 2^16
+	 */
+	fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ;
+
+	ndiv = fvco;
+	do_div(ndiv, (clk_rate * 2));
+	pll_params->ndiv = (u8)ndiv;
+
+	frac = fvco * (1 << 16);
+	do_div(frac, (clk_rate * 2));
+	frac = frac - (ndiv * (1 << 16));
+	pll_params->frac = (u16)frac;
+}
+
+static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)
+{
+	struct pll_params pll_params;
+	u32 clk_rate = clk_get_rate(usbphyc->clk);
+	u32 ndiv, frac;
+	u32 usbphyc_pll;
+
+	if ((clk_rate < PLL_INFF_MIN_RATE_HZ) ||
+	    (clk_rate > PLL_INFF_MAX_RATE_HZ)) {
+		dev_err(usbphyc->dev, "input clk freq (%dHz) out of range\n",
+			clk_rate);
+		return -EINVAL;
+	}
+
+	stm32_usbphyc_get_pll_params(clk_rate, &pll_params);
+	ndiv = FIELD_PREP(PLLNDIV, pll_params.ndiv);
+	frac = FIELD_PREP(PLLFRACIN, pll_params.frac);
+
+	usbphyc_pll = PLLDITHEN1 | PLLDITHEN0 | PLLSTRBYP | ndiv;
+
+	if (pll_params.frac)
+		usbphyc_pll |= PLLFRACCTL | frac;
+
+	writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL);
+
+	dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n",
+		clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll),
+		FIELD_GET(PLLFRACIN, usbphyc_pll));
+
+	return 0;
+}
+
+static bool stm32_usbphyc_has_one_phy_active(struct stm32_usbphyc *usbphyc)
+{
+	int i;
+
+	for (i = 0; i < usbphyc->nphys; i++)
+		if (usbphyc->phys[i]->active)
+			return true;
+
+	return false;
+}
+
+static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc)
+{
+	void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
+	bool pllen = (readl_relaxed(pll_reg) & PLLEN);
+	int ret;
+
+	/* Check if one phy port has already configured the pll */
+	if (pllen && stm32_usbphyc_has_one_phy_active(usbphyc))
+		return 0;
+
+	if (pllen) {
+		stm32_usbphyc_clr_bits(pll_reg, PLLEN);
+		/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
+		udelay(PLL_PWR_DOWN_TIME_US);
+	}
+
+	ret = stm32_usbphyc_pll_init(usbphyc);
+	if (ret)
+		return ret;
+
+	stm32_usbphyc_set_bits(pll_reg, PLLEN);
+
+	/* Wait for maximum lock time */
+	udelay(PLL_LOCK_TIME_US);
+
+	if (!(readl_relaxed(pll_reg) & PLLEN)) {
+		dev_err(usbphyc->dev, "PLLEN not set\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
+{
+	void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
+
+	/* Check if other phy port active */
+	if (stm32_usbphyc_has_one_phy_active(usbphyc))
+		return 0;
+
+	stm32_usbphyc_clr_bits(pll_reg, PLLEN);
+	/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
+	udelay(PLL_PWR_DOWN_TIME_US);
+
+	if (readl_relaxed(pll_reg) & PLLEN) {
+		dev_err(usbphyc->dev, "PLL not reset\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int stm32_usbphyc_phy_init(struct phy *phy)
+{
+	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+	struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc;
+	int ret;
+
+	ret = stm32_usbphyc_pll_enable(usbphyc);
+	if (ret)
+		return ret;
+
+	usbphyc_phy->active = true;
+
+	return 0;
+}
+
+static int stm32_usbphyc_phy_exit(struct phy *phy)
+{
+	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+	struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc;
+
+	usbphyc_phy->active = false;
+
+	return stm32_usbphyc_pll_disable(usbphyc);
+}
+
+static int stm32_usbphyc_phy_power_on(struct phy *phy)
+{
+	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+
+	return regulator_bulk_enable(NUM_SUPPLIES, usbphyc_phy->supplies);
+}
+
+static int stm32_usbphyc_phy_power_off(struct phy *phy)
+{
+	struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+
+	return regulator_bulk_disable(NUM_SUPPLIES, usbphyc_phy->supplies);
+}
+
+static const struct phy_ops stm32_usbphyc_phy_ops = {
+	.init = stm32_usbphyc_phy_init,
+	.exit = stm32_usbphyc_phy_exit,
+	.power_on = stm32_usbphyc_phy_power_on,
+	.power_off = stm32_usbphyc_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc,
+				       u32 utmi_switch)
+{
+	if (!utmi_switch)
+		stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_MISC,
+				       SWITHOST);
+	else
+		stm32_usbphyc_set_bits(usbphyc->base + STM32_USBPHYC_MISC,
+				       SWITHOST);
+	usbphyc->switch_setup = utmi_switch;
+}
+
+static struct phy *stm32_usbphyc_of_xlate(struct device *dev,
+					  struct of_phandle_args *args)
+{
+	struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev);
+	struct stm32_usbphyc_phy *usbphyc_phy = NULL;
+	struct device_node *phynode = args->np;
+	int port = 0;
+
+	for (port = 0; port < usbphyc->nphys; port++) {
+		if (phynode == usbphyc->phys[port]->phy->dev.of_node) {
+			usbphyc_phy = usbphyc->phys[port];
+			break;
+		}
+	}
+	if (!usbphyc_phy) {
+		dev_err(dev, "failed to find phy\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (((usbphyc_phy->index == 0) && (args->args_count != 0)) ||
+	    ((usbphyc_phy->index == 1) && (args->args_count != 1))) {
+		dev_err(dev, "invalid number of cells for phy port%d\n",
+			usbphyc_phy->index);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* Configure the UTMI switch for PHY port#2 */
+	if (usbphyc_phy->index == 1) {
+		if (usbphyc->switch_setup < 0) {
+			stm32_usbphyc_switch_setup(usbphyc, args->args[0]);
+		} else {
+			if (args->args[0] != usbphyc->switch_setup) {
+				dev_err(dev, "phy port1 already used\n");
+				return ERR_PTR(-EBUSY);
+			}
+		}
+	}
+
+	return usbphyc_phy->phy;
+}
+
+static int stm32_usbphyc_probe(struct platform_device *pdev)
+{
+	struct stm32_usbphyc *usbphyc;
+	struct device *dev = &pdev->dev;
+	struct device_node *child, *np = dev->of_node;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	u32 version;
+	int ret, port = 0;
+
+	usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL);
+	if (!usbphyc)
+		return -ENOMEM;
+	usbphyc->dev = dev;
+	dev_set_drvdata(dev, usbphyc);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	usbphyc->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(usbphyc->base))
+		return PTR_ERR(usbphyc->base);
+
+	usbphyc->clk = devm_clk_get(dev, 0);
+	if (IS_ERR(usbphyc->clk)) {
+		ret = PTR_ERR(usbphyc->clk);
+		dev_err(dev, "clk get failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(usbphyc->clk);
+	if (ret) {
+		dev_err(dev, "clk enable failed: %d\n", ret);
+		return ret;
+	}
+
+	usbphyc->rst = devm_reset_control_get(dev, 0);
+	if (!IS_ERR(usbphyc->rst)) {
+		reset_control_assert(usbphyc->rst);
+		udelay(2);
+		reset_control_deassert(usbphyc->rst);
+	}
+
+	usbphyc->switch_setup = -EINVAL;
+	usbphyc->nphys = of_get_child_count(np);
+	usbphyc->phys = devm_kcalloc(dev, usbphyc->nphys,
+				     sizeof(*usbphyc->phys), GFP_KERNEL);
+	if (!usbphyc->phys) {
+		ret = -ENOMEM;
+		goto clk_disable;
+	}
+
+	for_each_child_of_node(np, child) {
+		struct stm32_usbphyc_phy *usbphyc_phy;
+		struct phy *phy;
+		u32 index;
+		int i;
+
+		phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops);
+		if (IS_ERR(phy)) {
+			ret = PTR_ERR(phy);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "failed to create phy%d: %d\n",
+					port, ret);
+			goto put_child;
+		}
+
+		usbphyc_phy = devm_kzalloc(dev, sizeof(*usbphyc_phy),
+					   GFP_KERNEL);
+		if (!usbphyc_phy) {
+			ret = -ENOMEM;
+			goto put_child;
+		}
+
+		for (i = 0; i < NUM_SUPPLIES; i++)
+			usbphyc_phy->supplies[i].supply = supplies_names[i];
+
+		ret = devm_regulator_bulk_get(&phy->dev, NUM_SUPPLIES,
+					      usbphyc_phy->supplies);
+		if (ret) {
+			if (ret != -EPROBE_DEFER)
+				dev_err(&phy->dev,
+					"failed to get regulators: %d\n", ret);
+			goto put_child;
+		}
+
+		ret = of_property_read_u32(child, "reg", &index);
+		if (ret || index > usbphyc->nphys) {
+			dev_err(&phy->dev, "invalid reg property: %d\n", ret);
+			goto put_child;
+		}
+
+		usbphyc->phys[port] = usbphyc_phy;
+		phy_set_bus_width(phy, 8);
+		phy_set_drvdata(phy, usbphyc_phy);
+
+		usbphyc->phys[port]->phy = phy;
+		usbphyc->phys[port]->usbphyc = usbphyc;
+		usbphyc->phys[port]->index = index;
+		usbphyc->phys[port]->active = false;
+
+		port++;
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev,
+						     stm32_usbphyc_of_xlate);
+	if (IS_ERR(phy_provider)) {
+		ret = PTR_ERR(phy_provider);
+		dev_err(dev, "failed to register phy provider: %d\n", ret);
+		goto clk_disable;
+	}
+
+	version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION);
+	dev_info(dev, "registered rev:%lu.%lu\n",
+		 FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version));
+
+	return 0;
+
+put_child:
+	of_node_put(child);
+clk_disable:
+	clk_disable_unprepare(usbphyc->clk);
+
+	return ret;
+}
+
+static int stm32_usbphyc_remove(struct platform_device *pdev)
+{
+	struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev);
+
+	clk_disable_unprepare(usbphyc->clk);
+
+	return 0;
+}
+
+static const struct of_device_id stm32_usbphyc_of_match[] = {
+	{ .compatible = "st,stm32mp1-usbphyc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match);
+
+static struct platform_driver stm32_usbphyc_driver = {
+	.probe = stm32_usbphyc_probe,
+	.remove = stm32_usbphyc_remove,
+	.driver = {
+		.of_match_table = stm32_usbphyc_of_match,
+		.name = "stm32-usbphyc",
+	}
+};
+module_platform_driver(stm32_usbphyc_driver);
+
+MODULE_DESCRIPTION("STMicroelectronics STM32 USBPHYC driver");
+MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
+MODULE_LICENSE("GPL v2");