Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 181 insertions, 0 deletions

diff --git a/drivers/pinctrl/intel/pinctrl-intel.h b/drivers/pinctrl/intel/pinctrl-intel.h
new file mode 100644
index 000000000..1785abf15
--- /dev/null
+++ b/drivers/pinctrl/intel/pinctrl-intel.h
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Core pinctrl/GPIO driver for Intel GPIO controllers
+ *
+ * Copyright (C) 2015, Intel Corporation
+ * Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
+ *          Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#ifndef PINCTRL_INTEL_H
+#define PINCTRL_INTEL_H
+
+struct pinctrl_pin_desc;
+struct platform_device;
+struct device;
+
+/**
+ * struct intel_pingroup - Description about group of pins
+ * @name: Name of the groups
+ * @pins: All pins in this group
+ * @npins: Number of pins in this groups
+ * @mode: Native mode in which the group is muxed out @pins. Used if @modes
+ *        is %NULL.
+ * @modes: If not %NULL this will hold mode for each pin in @pins
+ */
+struct intel_pingroup {
+	const char *name;
+	const unsigned *pins;
+	size_t npins;
+	unsigned short mode;
+	const unsigned *modes;
+};
+
+/**
+ * struct intel_function - Description about a function
+ * @name: Name of the function
+ * @groups: An array of groups for this function
+ * @ngroups: Number of groups in @groups
+ */
+struct intel_function {
+	const char *name;
+	const char * const *groups;
+	size_t ngroups;
+};
+
+/**
+ * struct intel_padgroup - Hardware pad group information
+ * @reg_num: GPI_IS register number
+ * @base: Starting pin of this group
+ * @size: Size of this group (maximum is 32).
+ * @gpio_base: Starting GPIO base of this group (%0 if matches with @base,
+ *	       and %-1 if no GPIO mapping should be created)
+ * @padown_num: PAD_OWN register number (assigned by the core driver)
+ *
+ * If pad groups of a community are not the same size, use this structure
+ * to specify them.
+ */
+struct intel_padgroup {
+	unsigned reg_num;
+	unsigned base;
+	unsigned size;
+	int gpio_base;
+	unsigned padown_num;
+};
+
+/**
+ * struct intel_community - Intel pin community description
+ * @barno: MMIO BAR number where registers for this community reside
+ * @padown_offset: Register offset of PAD_OWN register from @regs. If %0
+ *                 then there is no support for owner.
+ * @padcfglock_offset: Register offset of PADCFGLOCK from @regs. If %0 then
+ *                     locking is not supported.
+ * @hostown_offset: Register offset of HOSTSW_OWN from @regs. If %0 then it
+ *                  is assumed that the host owns the pin (rather than
+ *                  ACPI).
+ * @is_offset: Register offset of GPI_IS from @regs. If %0 then uses the
+ *             default (%0x100).
+ * @ie_offset: Register offset of GPI_IE from @regs.
+ * @pin_base: Starting pin of pins in this community
+ * @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK,
+ *            HOSTSW_OWN,  GPI_IS, GPI_IE, etc. Used when @gpps is %NULL.
+ * @gpp_num_padown_regs: Number of pad registers each pad group consumes at
+ *			 minimum. Use %0 if the number of registers can be
+ *			 determined by the size of the group.
+ * @npins: Number of pins in this community
+ * @features: Additional features supported by the hardware
+ * @gpps: Pad groups if the controller has variable size pad groups
+ * @ngpps: Number of pad groups in this community
+ * @regs: Community specific common registers (reserved for core driver)
+ * @pad_regs: Community specific pad registers (reserved for core driver)
+ *
+ * Most Intel GPIO host controllers this driver supports each pad group is
+ * of equal size (except the last one). In that case the driver can just
+ * fill in @gpp_size field and let the core driver to handle the rest. If
+ * the controller has pad groups of variable size the client driver can
+ * pass custom @gpps and @ngpps instead.
+ */
+struct intel_community {
+	unsigned barno;
+	unsigned padown_offset;
+	unsigned padcfglock_offset;
+	unsigned hostown_offset;
+	unsigned is_offset;
+	unsigned ie_offset;
+	unsigned pin_base;
+	unsigned gpp_size;
+	unsigned gpp_num_padown_regs;
+	size_t npins;
+	unsigned features;
+	const struct intel_padgroup *gpps;
+	size_t ngpps;
+	/* Reserved for the core driver */
+	void __iomem *regs;
+	void __iomem *pad_regs;
+};
+
+/* Additional features supported by the hardware */
+#define PINCTRL_FEATURE_DEBOUNCE	BIT(0)
+#define PINCTRL_FEATURE_1K_PD		BIT(1)
+
+/**
+ * PIN_GROUP - Declare a pin group
+ * @n: Name of the group
+ * @p: An array of pins this group consists
+ * @m: Mode which the pins are put when this group is active. Can be either
+ *     a single integer or an array of integers in which case mode is per
+ *     pin.
+ */
+#define PIN_GROUP(n, p, m)					\
+	{							\
+		.name = (n),					\
+		.pins = (p),					\
+		.npins = ARRAY_SIZE((p)),			\
+		.mode = __builtin_choose_expr(			\
+			__builtin_constant_p((m)), (m), 0),	\
+		.modes = __builtin_choose_expr(			\
+			__builtin_constant_p((m)), NULL, (m)),	\
+	}
+
+#define FUNCTION(n, g)				\
+	{					\
+		.name = (n),			\
+		.groups = (g),			\
+		.ngroups = ARRAY_SIZE((g)),	\
+	}
+
+/**
+ * struct intel_pinctrl_soc_data - Intel pin controller per-SoC configuration
+ * @uid: ACPI _UID for the probe driver use if needed
+ * @pins: Array if pins this pinctrl controls
+ * @npins: Number of pins in the array
+ * @groups: Array of pin groups
+ * @ngroups: Number of groups in the array
+ * @functions: Array of functions
+ * @nfunctions: Number of functions in the array
+ * @communities: Array of communities this pinctrl handles
+ * @ncommunities: Number of communities in the array
+ *
+ * The @communities is used as a template by the core driver. It will make
+ * copy of all communities and fill in rest of the information.
+ */
+struct intel_pinctrl_soc_data {
+	const char *uid;
+	const struct pinctrl_pin_desc *pins;
+	size_t npins;
+	const struct intel_pingroup *groups;
+	size_t ngroups;
+	const struct intel_function *functions;
+	size_t nfunctions;
+	const struct intel_community *communities;
+	size_t ncommunities;
+};
+
+int intel_pinctrl_probe(struct platform_device *pdev,
+			const struct intel_pinctrl_soc_data *soc_data);
+#ifdef CONFIG_PM_SLEEP
+int intel_pinctrl_suspend(struct device *dev);
+int intel_pinctrl_resume(struct device *dev);
+#endif
+
+#endif /* PINCTRL_INTEL_H */