Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 939 insertions, 0 deletions

diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
new file mode 100644
index 000000000..64545b300
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -0,0 +1,939 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for         *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
+ * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
+ * www.broadcom.com                                                *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
+ *                                                                 *
+ * This program is free software; you can redistribute it and/or   *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
+ *******************************************************************/
+
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/sched/signal.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_fc.h>
+
+#include "lpfc_hw4.h"
+#include "lpfc_hw.h"
+#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
+#include "lpfc_nl.h"
+#include "lpfc_disc.h"
+#include "lpfc_scsi.h"
+#include "lpfc.h"
+#include "lpfc_logmsg.h"
+#include "lpfc_crtn.h"
+#include "lpfc_version.h"
+#include "lpfc_vport.h"
+
+inline void lpfc_vport_set_state(struct lpfc_vport *vport,
+				 enum fc_vport_state new_state)
+{
+	struct fc_vport *fc_vport = vport->fc_vport;
+
+	if (fc_vport) {
+		/*
+		 * When the transport defines fc_vport_set state we will replace
+		 * this code with the following line
+		 */
+		/* fc_vport_set_state(fc_vport, new_state); */
+		if (new_state != FC_VPORT_INITIALIZING)
+			fc_vport->vport_last_state = fc_vport->vport_state;
+		fc_vport->vport_state = new_state;
+	}
+
+	/* for all the error states we will set the invternal state to FAILED */
+	switch (new_state) {
+	case FC_VPORT_NO_FABRIC_SUPP:
+	case FC_VPORT_NO_FABRIC_RSCS:
+	case FC_VPORT_FABRIC_LOGOUT:
+	case FC_VPORT_FABRIC_REJ_WWN:
+	case FC_VPORT_FAILED:
+		vport->port_state = LPFC_VPORT_FAILED;
+		break;
+	case FC_VPORT_LINKDOWN:
+		vport->port_state = LPFC_VPORT_UNKNOWN;
+		break;
+	default:
+		/* do nothing */
+		break;
+	}
+}
+
+int
+lpfc_alloc_vpi(struct lpfc_hba *phba)
+{
+	unsigned long vpi;
+
+	spin_lock_irq(&phba->hbalock);
+	/* Start at bit 1 because vpi zero is reserved for the physical port */
+	vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1);
+	if (vpi > phba->max_vpi)
+		vpi = 0;
+	else
+		set_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used++;
+	spin_unlock_irq(&phba->hbalock);
+	return vpi;
+}
+
+static void
+lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
+{
+	if (vpi == 0)
+		return;
+	spin_lock_irq(&phba->hbalock);
+	clear_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used--;
+	spin_unlock_irq(&phba->hbalock);
+}
+
+static int
+lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
+{
+	LPFC_MBOXQ_t *pmb;
+	MAILBOX_t *mb;
+	struct lpfc_dmabuf *mp;
+	int  rc;
+
+	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		return -ENOMEM;
+	}
+	mb = &pmb->u.mb;
+
+	rc = lpfc_read_sparam(phba, pmb, vport->vpi);
+	if (rc) {
+		mempool_free(pmb, phba->mbox_mem_pool);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Grab buffer pointer and clear context1 so we can use
+	 * lpfc_sli_issue_box_wait
+	 */
+	mp = (struct lpfc_dmabuf *) pmb->context1;
+	pmb->context1 = NULL;
+
+	pmb->vport = vport;
+	rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2);
+	if (rc != MBX_SUCCESS) {
+		if (signal_pending(current)) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
+					 "1830 Signal aborted mbxCmd x%x\n",
+					 mb->mbxCommand);
+			lpfc_mbuf_free(phba, mp->virt, mp->phys);
+			kfree(mp);
+			if (rc != MBX_TIMEOUT)
+				mempool_free(pmb, phba->mbox_mem_pool);
+			return -EINTR;
+		} else {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
+					 "1818 VPort failed init, mbxCmd x%x "
+					 "READ_SPARM mbxStatus x%x, rc = x%x\n",
+					 mb->mbxCommand, mb->mbxStatus, rc);
+			lpfc_mbuf_free(phba, mp->virt, mp->phys);
+			kfree(mp);
+			if (rc != MBX_TIMEOUT)
+				mempool_free(pmb, phba->mbox_mem_pool);
+			return -EIO;
+		}
+	}
+
+	memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
+	memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
+	       sizeof (struct lpfc_name));
+	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
+	       sizeof (struct lpfc_name));
+
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	mempool_free(pmb, phba->mbox_mem_pool);
+
+	return 0;
+}
+
+static int
+lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn,
+		      const char *name_type)
+{
+				/* ensure that IEEE format 1 addresses
+				 * contain zeros in bits 59-48
+				 */
+	if (!((wwn->u.wwn[0] >> 4) == 1 &&
+	      ((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0)))
+		return 1;
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+			"1822 Invalid %s: %02x:%02x:%02x:%02x:"
+			"%02x:%02x:%02x:%02x\n",
+			name_type,
+			wwn->u.wwn[0], wwn->u.wwn[1],
+			wwn->u.wwn[2], wwn->u.wwn[3],
+			wwn->u.wwn[4], wwn->u.wwn[5],
+			wwn->u.wwn[6], wwn->u.wwn[7]);
+	return 0;
+}
+
+static int
+lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport)
+{
+	struct lpfc_vport *vport;
+	unsigned long flags;
+
+	spin_lock_irqsave(&phba->hbalock, flags);
+	list_for_each_entry(vport, &phba->port_list, listentry) {
+		if (vport == new_vport)
+			continue;
+		/* If they match, return not unique */
+		if (memcmp(&vport->fc_sparam.portName,
+			   &new_vport->fc_sparam.portName,
+			   sizeof(struct lpfc_name)) == 0) {
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			return 0;
+		}
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+	return 1;
+}
+
+/**
+ * lpfc_discovery_wait - Wait for driver discovery to quiesce
+ * @vport: The virtual port for which this call is being executed.
+ *
+ * This driver calls this routine specifically from lpfc_vport_delete
+ * to enforce a synchronous execution of vport
+ * delete relative to discovery activities.  The
+ * lpfc_vport_delete routine should not return until it
+ * can reasonably guarantee that discovery has quiesced.
+ * Post FDISC LOGO, the driver must wait until its SAN teardown is
+ * complete and all resources recovered before allowing
+ * cleanup.
+ *
+ * This routine does not require any locks held.
+ **/
+static void lpfc_discovery_wait(struct lpfc_vport *vport)
+{
+	struct lpfc_hba *phba = vport->phba;
+	uint32_t wait_flags = 0;
+	unsigned long wait_time_max;
+	unsigned long start_time;
+
+	wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE |
+		     FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO;
+
+	/*
+	 * The time constraint on this loop is a balance between the
+	 * fabric RA_TOV value and dev_loss tmo.  The driver's
+	 * devloss_tmo is 10 giving this loop a 3x multiplier minimally.
+	 */
+	wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000);
+	wait_time_max += jiffies;
+	start_time = jiffies;
+	while (time_before(jiffies, wait_time_max)) {
+		if ((vport->num_disc_nodes > 0)    ||
+		    (vport->fc_flag & wait_flags)  ||
+		    ((vport->port_state > LPFC_VPORT_FAILED) &&
+		     (vport->port_state < LPFC_VPORT_READY))) {
+			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
+					"1833 Vport discovery quiesce Wait:"
+					" state x%x fc_flags x%x"
+					" num_nodes x%x, waiting 1000 msecs"
+					" total wait msecs x%x\n",
+					vport->port_state, vport->fc_flag,
+					vport->num_disc_nodes,
+					jiffies_to_msecs(jiffies - start_time));
+			msleep(1000);
+		} else {
+			/* Base case.  Wait variants satisfied.  Break out */
+			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
+					 "1834 Vport discovery quiesced:"
+					 " state x%x fc_flags x%x"
+					 " wait msecs x%x\n",
+					 vport->port_state, vport->fc_flag,
+					 jiffies_to_msecs(jiffies
+						- start_time));
+			break;
+		}
+	}
+
+	if (time_after(jiffies, wait_time_max))
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+				"1835 Vport discovery quiesce failed:"
+				" state x%x fc_flags x%x wait msecs x%x\n",
+				vport->port_state, vport->fc_flag,
+				jiffies_to_msecs(jiffies - start_time));
+}
+
+int
+lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
+{
+	struct lpfc_nodelist *ndlp;
+	struct Scsi_Host *shost = fc_vport->shost;
+	struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = pport->phba;
+	struct lpfc_vport *vport = NULL;
+	int instance;
+	int vpi;
+	int rc = VPORT_ERROR;
+	int status;
+
+	if ((phba->sli_rev < 3) || !(phba->cfg_enable_npiv)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+				"1808 Create VPORT failed: "
+				"NPIV is not enabled: SLImode:%d\n",
+				phba->sli_rev);
+		rc = VPORT_INVAL;
+		goto error_out;
+	}
+
+	/* NPIV is not supported if HBA has NVME enabled */
+	if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+				"3189 Create VPORT failed: "
+				"NPIV is not supported on NVME\n");
+		rc = VPORT_INVAL;
+		goto error_out;
+	}
+
+	vpi = lpfc_alloc_vpi(phba);
+	if (vpi == 0) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+				"1809 Create VPORT failed: "
+				"Max VPORTs (%d) exceeded\n",
+				phba->max_vpi);
+		rc = VPORT_NORESOURCES;
+		goto error_out;
+	}
+
+	/* Assign an unused board number */
+	if ((instance = lpfc_get_instance()) < 0) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+				"1810 Create VPORT failed: Cannot get "
+				"instance number\n");
+		lpfc_free_vpi(phba, vpi);
+		rc = VPORT_NORESOURCES;
+		goto error_out;
+	}
+
+	vport = lpfc_create_port(phba, instance, &fc_vport->dev);
+	if (!vport) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+				"1811 Create VPORT failed: vpi x%x\n", vpi);
+		lpfc_free_vpi(phba, vpi);
+		rc = VPORT_NORESOURCES;
+		goto error_out;
+	}
+
+	vport->vpi = vpi;
+	lpfc_debugfs_initialize(vport);
+
+	if ((status = lpfc_vport_sparm(phba, vport))) {
+		if (status == -EINTR) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+					 "1831 Create VPORT Interrupted.\n");
+			rc = VPORT_ERROR;
+		} else {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+					 "1813 Create VPORT failed. "
+					 "Cannot get sparam\n");
+			rc = VPORT_NORESOURCES;
+		}
+		lpfc_free_vpi(phba, vpi);
+		destroy_port(vport);
+		goto error_out;
+	}
+
+	u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn);
+	u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn);
+
+	memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8);
+	memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8);
+
+	if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") ||
+	    !lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+				 "1821 Create VPORT failed. "
+				 "Invalid WWN format\n");
+		lpfc_free_vpi(phba, vpi);
+		destroy_port(vport);
+		rc = VPORT_INVAL;
+		goto error_out;
+	}
+
+	if (!lpfc_unique_wwpn(phba, vport)) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+				 "1823 Create VPORT failed. "
+				 "Duplicate WWN on HBA\n");
+		lpfc_free_vpi(phba, vpi);
+		destroy_port(vport);
+		rc = VPORT_INVAL;
+		goto error_out;
+	}
+
+	/* Create binary sysfs attribute for vport */
+	lpfc_alloc_sysfs_attr(vport);
+
+	/* Set the DFT_LUN_Q_DEPTH accordingly */
+	vport->cfg_lun_queue_depth  = phba->pport->cfg_lun_queue_depth;
+
+	*(struct lpfc_vport **)fc_vport->dd_data = vport;
+	vport->fc_vport = fc_vport;
+
+	/* At this point we are fully registered with SCSI Layer.  */
+	vport->load_flag |= FC_ALLOW_FDMI;
+	if (phba->cfg_enable_SmartSAN ||
+	    (phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) {
+		/* Setup appropriate attribute masks */
+		vport->fdmi_hba_mask = phba->pport->fdmi_hba_mask;
+		vport->fdmi_port_mask = phba->pport->fdmi_port_mask;
+	}
+
+	if ((phba->nvmet_support == 0) &&
+	    ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
+	     (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME))) {
+		/* Create NVME binding with nvme_fc_transport. This
+		 * ensures the vport is initialized.
+		 */
+		rc = lpfc_nvme_create_localport(vport);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"6003 %s status x%x\n",
+					"NVME registration failed, ",
+					rc);
+			goto error_out;
+		}
+	}
+
+	/*
+	 * In SLI4, the vpi must be activated before it can be used
+	 * by the port.
+	 */
+	if ((phba->sli_rev == LPFC_SLI_REV4) &&
+	    (pport->fc_flag & FC_VFI_REGISTERED)) {
+		rc = lpfc_sli4_init_vpi(vport);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+					"1838 Failed to INIT_VPI on vpi %d "
+					"status %d\n", vpi, rc);
+			rc = VPORT_NORESOURCES;
+			lpfc_free_vpi(phba, vpi);
+			goto error_out;
+		}
+	} else if (phba->sli_rev == LPFC_SLI_REV4) {
+		/*
+		 * Driver cannot INIT_VPI now. Set the flags to
+		 * init_vpi when reg_vfi complete.
+		 */
+		vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
+		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
+		rc = VPORT_OK;
+		goto out;
+	}
+
+	if ((phba->link_state < LPFC_LINK_UP) ||
+	    (pport->port_state < LPFC_FABRIC_CFG_LINK) ||
+	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
+		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
+		rc = VPORT_OK;
+		goto out;
+	}
+
+	if (disable) {
+		lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
+		rc = VPORT_OK;
+		goto out;
+	}
+
+	/* Use the Physical nodes Fabric NDLP to determine if the link is
+	 * up and ready to FDISC.
+	 */
+	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
+	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
+	    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
+		if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
+			lpfc_set_disctmo(vport);
+			lpfc_initial_fdisc(vport);
+		} else {
+			lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+					 "0262 No NPIV Fabric support\n");
+		}
+	} else {
+		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+	}
+	rc = VPORT_OK;
+
+out:
+	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+			"1825 Vport Created.\n");
+	lpfc_host_attrib_init(lpfc_shost_from_vport(vport));
+error_out:
+	return rc;
+}
+
+static int
+disable_vport(struct fc_vport *fc_vport)
+{
+	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
+	struct lpfc_hba   *phba = vport->phba;
+	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
+	long timeout;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+	ndlp = lpfc_findnode_did(vport, Fabric_DID);
+	if (ndlp && NLP_CHK_NODE_ACT(ndlp)
+	    && phba->link_state >= LPFC_LINK_UP) {
+		vport->unreg_vpi_cmpl = VPORT_INVAL;
+		timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
+		if (!lpfc_issue_els_npiv_logo(vport, ndlp))
+			while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
+				timeout = schedule_timeout(timeout);
+	}
+
+	lpfc_sli_host_down(vport);
+
+	/* Mark all nodes for discovery so we can remove them by
+	 * calling lpfc_cleanup_rpis(vport, 1)
+	 */
+	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
+		if (!NLP_CHK_NODE_ACT(ndlp))
+			continue;
+		if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
+			continue;
+		lpfc_disc_state_machine(vport, ndlp, NULL,
+					NLP_EVT_DEVICE_RECOVERY);
+	}
+	lpfc_cleanup_rpis(vport, 1);
+
+	lpfc_stop_vport_timers(vport);
+	lpfc_unreg_all_rpis(vport);
+	lpfc_unreg_default_rpis(vport);
+	/*
+	 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the
+	 * scsi_host_put() to release the vport.
+	 */
+	lpfc_mbx_unreg_vpi(vport);
+	spin_lock_irq(shost->host_lock);
+	vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
+	spin_unlock_irq(shost->host_lock);
+
+	lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
+	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+			 "1826 Vport Disabled.\n");
+	return VPORT_OK;
+}
+
+static int
+enable_vport(struct fc_vport *fc_vport)
+{
+	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
+	struct lpfc_hba   *phba = vport->phba;
+	struct lpfc_nodelist *ndlp = NULL;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+	if ((phba->link_state < LPFC_LINK_UP) ||
+	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
+		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
+		return VPORT_OK;
+	}
+
+	spin_lock_irq(shost->host_lock);
+	vport->load_flag |= FC_LOADING;
+	if (vport->fc_flag & FC_VPORT_NEEDS_INIT_VPI) {
+		spin_unlock_irq(shost->host_lock);
+		lpfc_issue_init_vpi(vport);
+		goto out;
+	}
+
+	vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+	spin_unlock_irq(shost->host_lock);
+
+	/* Use the Physical nodes Fabric NDLP to determine if the link is
+	 * up and ready to FDISC.
+	 */
+	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
+	if (ndlp && NLP_CHK_NODE_ACT(ndlp)
+	    && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
+		if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
+			lpfc_set_disctmo(vport);
+			lpfc_initial_fdisc(vport);
+		} else {
+			lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+					 "0264 No NPIV Fabric support\n");
+		}
+	} else {
+		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+	}
+
+out:
+	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+			 "1827 Vport Enabled.\n");
+	return VPORT_OK;
+}
+
+int
+lpfc_vport_disable(struct fc_vport *fc_vport, bool disable)
+{
+	if (disable)
+		return disable_vport(fc_vport);
+	else
+		return enable_vport(fc_vport);
+}
+
+
+int
+lpfc_vport_delete(struct fc_vport *fc_vport)
+{
+	struct lpfc_nodelist *ndlp = NULL;
+	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+	struct lpfc_hba   *phba = vport->phba;
+	long timeout;
+	bool ns_ndlp_referenced = false;
+
+	if (vport->port_type == LPFC_PHYSICAL_PORT) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+				 "1812 vport_delete failed: Cannot delete "
+				 "physical host\n");
+		return VPORT_ERROR;
+	}
+
+	/* If the vport is a static vport fail the deletion. */
+	if ((vport->vport_flag & STATIC_VPORT) &&
+		!(phba->pport->load_flag & FC_UNLOADING)) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+				 "1837 vport_delete failed: Cannot delete "
+				 "static vport.\n");
+		return VPORT_ERROR;
+	}
+	spin_lock_irq(&phba->hbalock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(&phba->hbalock);
+	/*
+	 * If we are not unloading the driver then prevent the vport_delete
+	 * from happening until after this vport's discovery is finished.
+	 */
+	if (!(phba->pport->load_flag & FC_UNLOADING)) {
+		int check_count = 0;
+		while (check_count < ((phba->fc_ratov * 3) + 3) &&
+		       vport->port_state > LPFC_VPORT_FAILED &&
+		       vport->port_state < LPFC_VPORT_READY) {
+			check_count++;
+			msleep(1000);
+		}
+		if (vport->port_state > LPFC_VPORT_FAILED &&
+		    vport->port_state < LPFC_VPORT_READY)
+			return -EAGAIN;
+	}
+
+	/*
+	 * Take early refcount for outstanding I/O requests we schedule during
+	 * delete processing for unreg_vpi.  Always keep this before
+	 * scsi_remove_host() as we can no longer obtain a reference through
+	 * scsi_host_get() after scsi_host_remove as shost is set to SHOST_DEL.
+	 */
+	if (!scsi_host_get(shost))
+		return VPORT_INVAL;
+
+	lpfc_free_sysfs_attr(vport);
+
+	lpfc_debugfs_terminate(vport);
+
+	/*
+	 * The call to fc_remove_host might release the NameServer ndlp. Since
+	 * we might need to use the ndlp to send the DA_ID CT command,
+	 * increment the reference for the NameServer ndlp to prevent it from
+	 * being released.
+	 */
+	ndlp = lpfc_findnode_did(vport, NameServer_DID);
+	if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
+		lpfc_nlp_get(ndlp);
+		ns_ndlp_referenced = true;
+	}
+
+	/* Remove FC host and then SCSI host with the vport */
+	fc_remove_host(shost);
+	scsi_remove_host(shost);
+
+	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
+
+	/* In case of driver unload, we shall not perform fabric logo as the
+	 * worker thread already stopped at this stage and, in this case, we
+	 * can safely skip the fabric logo.
+	 */
+	if (phba->pport->load_flag & FC_UNLOADING) {
+		if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
+		    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
+		    phba->link_state >= LPFC_LINK_UP) {
+			/* First look for the Fabric ndlp */
+			ndlp = lpfc_findnode_did(vport, Fabric_DID);
+			if (!ndlp)
+				goto skip_logo;
+			else if (!NLP_CHK_NODE_ACT(ndlp)) {
+				ndlp = lpfc_enable_node(vport, ndlp,
+							NLP_STE_UNUSED_NODE);
+				if (!ndlp)
+					goto skip_logo;
+			}
+			/* Remove ndlp from vport npld list */
+			lpfc_dequeue_node(vport, ndlp);
+
+			/* Indicate free memory when release */
+			spin_lock_irq(&phba->ndlp_lock);
+			NLP_SET_FREE_REQ(ndlp);
+			spin_unlock_irq(&phba->ndlp_lock);
+			/* Kick off release ndlp when it can be safely done */
+			lpfc_nlp_put(ndlp);
+		}
+		goto skip_logo;
+	}
+
+	/* Otherwise, we will perform fabric logo as needed */
+	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
+	    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
+	    phba->link_state >= LPFC_LINK_UP &&
+	    phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
+		if (vport->cfg_enable_da_id) {
+			timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
+			if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0))
+				while (vport->ct_flags && timeout)
+					timeout = schedule_timeout(timeout);
+			else
+				lpfc_printf_log(vport->phba, KERN_WARNING,
+						LOG_VPORT,
+						"1829 CT command failed to "
+						"delete objects on fabric\n");
+		}
+		/* First look for the Fabric ndlp */
+		ndlp = lpfc_findnode_did(vport, Fabric_DID);
+		if (!ndlp) {
+			/* Cannot find existing Fabric ndlp, allocate one */
+			ndlp = lpfc_nlp_init(vport, Fabric_DID);
+			if (!ndlp)
+				goto skip_logo;
+			/* Indicate free memory when release */
+			NLP_SET_FREE_REQ(ndlp);
+		} else {
+			if (!NLP_CHK_NODE_ACT(ndlp)) {
+				ndlp = lpfc_enable_node(vport, ndlp,
+						NLP_STE_UNUSED_NODE);
+				if (!ndlp)
+					goto skip_logo;
+			}
+
+			/* Remove ndlp from vport list */
+			lpfc_dequeue_node(vport, ndlp);
+			spin_lock_irq(&phba->ndlp_lock);
+			if (!NLP_CHK_FREE_REQ(ndlp))
+				/* Indicate free memory when release */
+				NLP_SET_FREE_REQ(ndlp);
+			else {
+				/* Skip this if ndlp is already in free mode */
+				spin_unlock_irq(&phba->ndlp_lock);
+				goto skip_logo;
+			}
+			spin_unlock_irq(&phba->ndlp_lock);
+		}
+
+		/*
+		 * If the vpi is not registered, then a valid FDISC doesn't
+		 * exist and there is no need for a ELS LOGO.  Just cleanup
+		 * the ndlp.
+		 */
+		if (!(vport->vpi_state & LPFC_VPI_REGISTERED)) {
+			lpfc_nlp_put(ndlp);
+			goto skip_logo;
+		}
+
+		vport->unreg_vpi_cmpl = VPORT_INVAL;
+		timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
+		if (!lpfc_issue_els_npiv_logo(vport, ndlp))
+			while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
+				timeout = schedule_timeout(timeout);
+	}
+
+	if (!(phba->pport->load_flag & FC_UNLOADING))
+		lpfc_discovery_wait(vport);
+
+skip_logo:
+
+	/*
+	 * If the NameServer ndlp has been incremented to allow the DA_ID CT
+	 * command to be sent, decrement the ndlp now.
+	 */
+	if (ns_ndlp_referenced) {
+		ndlp = lpfc_findnode_did(vport, NameServer_DID);
+		lpfc_nlp_put(ndlp);
+	}
+
+	lpfc_cleanup(vport);
+	lpfc_sli_host_down(vport);
+
+	lpfc_stop_vport_timers(vport);
+
+	if (!(phba->pport->load_flag & FC_UNLOADING)) {
+		lpfc_unreg_all_rpis(vport);
+		lpfc_unreg_default_rpis(vport);
+		/*
+		 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi)
+		 * does the scsi_host_put() to release the vport.
+		 */
+		if (!(vport->vpi_state & LPFC_VPI_REGISTERED) ||
+				lpfc_mbx_unreg_vpi(vport))
+			scsi_host_put(shost);
+	} else {
+		scsi_host_put(shost);
+	}
+
+	lpfc_free_vpi(phba, vport->vpi);
+	vport->work_port_events = 0;
+	spin_lock_irq(&phba->hbalock);
+	list_del_init(&vport->listentry);
+	spin_unlock_irq(&phba->hbalock);
+	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+			 "1828 Vport Deleted.\n");
+	scsi_host_put(shost);
+	return VPORT_OK;
+}
+
+struct lpfc_vport **
+lpfc_create_vport_work_array(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *port_iterator;
+	struct lpfc_vport **vports;
+	int index = 0;
+	vports = kcalloc(phba->max_vports + 1, sizeof(struct lpfc_vport *),
+			 GFP_KERNEL);
+	if (vports == NULL)
+		return NULL;
+	spin_lock_irq(&phba->hbalock);
+	list_for_each_entry(port_iterator, &phba->port_list, listentry) {
+		if (port_iterator->load_flag & FC_UNLOADING)
+			continue;
+		if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) {
+			lpfc_printf_vlog(port_iterator, KERN_ERR, LOG_VPORT,
+					 "1801 Create vport work array FAILED: "
+					 "cannot do scsi_host_get\n");
+			continue;
+		}
+		vports[index++] = port_iterator;
+	}
+	spin_unlock_irq(&phba->hbalock);
+	return vports;
+}
+
+void
+lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
+{
+	int i;
+	if (vports == NULL)
+		return;
+	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
+		scsi_host_put(lpfc_shost_from_vport(vports[i]));
+	kfree(vports);
+}
+
+
+/**
+ * lpfc_vport_reset_stat_data - Reset the statistical data for the vport
+ * @vport: Pointer to vport object.
+ *
+ * This function resets the statistical data for the vport. This function
+ * is called with the host_lock held
+ **/
+void
+lpfc_vport_reset_stat_data(struct lpfc_vport *vport)
+{
+	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
+
+	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
+		if (!NLP_CHK_NODE_ACT(ndlp))
+			continue;
+		if (ndlp->lat_data)
+			memset(ndlp->lat_data, 0, LPFC_MAX_BUCKET_COUNT *
+				sizeof(struct lpfc_scsicmd_bkt));
+	}
+}
+
+
+/**
+ * lpfc_alloc_bucket - Allocate data buffer required for statistical data
+ * @vport: Pointer to vport object.
+ *
+ * This function allocates data buffer required for all the FC
+ * nodes of the vport to collect statistical data.
+ **/
+void
+lpfc_alloc_bucket(struct lpfc_vport *vport)
+{
+	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
+
+	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
+		if (!NLP_CHK_NODE_ACT(ndlp))
+			continue;
+
+		kfree(ndlp->lat_data);
+		ndlp->lat_data = NULL;
+
+		if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) {
+			ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT,
+					 sizeof(struct lpfc_scsicmd_bkt),
+					 GFP_ATOMIC);
+
+			if (!ndlp->lat_data)
+				lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE,
+					"0287 lpfc_alloc_bucket failed to "
+					"allocate statistical data buffer DID "
+					"0x%x\n", ndlp->nlp_DID);
+		}
+	}
+}
+
+/**
+ * lpfc_free_bucket - Free data buffer required for statistical data
+ * @vport: Pointer to vport object.
+ *
+ * Th function frees statistical data buffer of all the FC
+ * nodes of the vport.
+ **/
+void
+lpfc_free_bucket(struct lpfc_vport *vport)
+{
+	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
+
+	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
+		if (!NLP_CHK_NODE_ACT(ndlp))
+			continue;
+
+		kfree(ndlp->lat_data);
+		ndlp->lat_data = NULL;
+	}
+}