Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 11209 insertions, 0 deletions

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
new file mode 100644
index 000000000..d899f2162
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -0,0 +1,11209 @@
+/*
+ * Scsi Host Layer for MPT (Message Passing Technology) based controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/blkdev.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/interrupt.h>
+#include <linux/aer.h>
+#include <linux/raid_class.h>
+#include <asm/unaligned.h>
+
+#include "mpt3sas_base.h"
+
+#define RAID_CHANNEL 1
+
+#define PCIE_CHANNEL 2
+
+/* forward proto's */
+static void _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander);
+static void _firmware_event_work(struct work_struct *work);
+
+static void _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device);
+static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u8 retry_count, u8 is_pd);
+static int _scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+static void _scsih_pcie_device_remove_from_sml(struct MPT3SAS_ADAPTER *ioc,
+	struct _pcie_device *pcie_device);
+static void
+_scsih_pcie_check_device(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+
+/* global parameters */
+LIST_HEAD(mpt3sas_ioc_list);
+/* global ioc lock for list operations */
+DEFINE_SPINLOCK(gioc_lock);
+
+MODULE_AUTHOR(MPT3SAS_AUTHOR);
+MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(MPT3SAS_DRIVER_VERSION);
+MODULE_ALIAS("mpt2sas");
+
+/* local parameters */
+static u8 scsi_io_cb_idx = -1;
+static u8 tm_cb_idx = -1;
+static u8 ctl_cb_idx = -1;
+static u8 base_cb_idx = -1;
+static u8 port_enable_cb_idx = -1;
+static u8 transport_cb_idx = -1;
+static u8 scsih_cb_idx = -1;
+static u8 config_cb_idx = -1;
+static int mpt2_ids;
+static int mpt3_ids;
+
+static u8 tm_tr_cb_idx = -1 ;
+static u8 tm_tr_volume_cb_idx = -1 ;
+static u8 tm_sas_control_cb_idx = -1;
+
+/* command line options */
+static u32 logging_level;
+MODULE_PARM_DESC(logging_level,
+	" bits for enabling additional logging info (default=0)");
+
+
+static ushort max_sectors = 0xFFFF;
+module_param(max_sectors, ushort, 0);
+MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 32767  default=32767");
+
+
+static int missing_delay[2] = {-1, -1};
+module_param_array(missing_delay, int, NULL, 0);
+MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
+
+/* scsi-mid layer global parmeter is max_report_luns, which is 511 */
+#define MPT3SAS_MAX_LUN (16895)
+static u64 max_lun = MPT3SAS_MAX_LUN;
+module_param(max_lun, ullong, 0);
+MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
+
+static ushort hbas_to_enumerate;
+module_param(hbas_to_enumerate, ushort, 0);
+MODULE_PARM_DESC(hbas_to_enumerate,
+		" 0 - enumerates both SAS 2.0 & SAS 3.0 generation HBAs\n \
+		  1 - enumerates only SAS 2.0 generation HBAs\n \
+		  2 - enumerates only SAS 3.0 generation HBAs (default=0)");
+
+/* diag_buffer_enable is bitwise
+ * bit 0 set = TRACE
+ * bit 1 set = SNAPSHOT
+ * bit 2 set = EXTENDED
+ *
+ * Either bit can be set, or both
+ */
+static int diag_buffer_enable = -1;
+module_param(diag_buffer_enable, int, 0);
+MODULE_PARM_DESC(diag_buffer_enable,
+	" post diag buffers (TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
+static int disable_discovery = -1;
+module_param(disable_discovery, int, 0);
+MODULE_PARM_DESC(disable_discovery, " disable discovery ");
+
+
+/* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
+static int prot_mask = -1;
+module_param(prot_mask, int, 0);
+MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=7 ");
+
+
+/* raid transport support */
+static struct raid_template *mpt3sas_raid_template;
+static struct raid_template *mpt2sas_raid_template;
+
+
+/**
+ * struct sense_info - common structure for obtaining sense keys
+ * @skey: sense key
+ * @asc: additional sense code
+ * @ascq: additional sense code qualifier
+ */
+struct sense_info {
+	u8 skey;
+	u8 asc;
+	u8 ascq;
+};
+
+#define MPT3SAS_PROCESS_TRIGGER_DIAG (0xFFFB)
+#define MPT3SAS_TURN_ON_PFA_LED (0xFFFC)
+#define MPT3SAS_PORT_ENABLE_COMPLETE (0xFFFD)
+#define MPT3SAS_ABRT_TASK_SET (0xFFFE)
+#define MPT3SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
+/**
+ * struct fw_event_work - firmware event struct
+ * @list: link list framework
+ * @work: work object (ioc->fault_reset_work_q)
+ * @ioc: per adapter object
+ * @device_handle: device handle
+ * @VF_ID: virtual function id
+ * @VP_ID: virtual port id
+ * @ignore: flag meaning this event has been marked to ignore
+ * @event: firmware event MPI2_EVENT_XXX defined in mpi2_ioc.h
+ * @refcount: kref for this event
+ * @event_data: reply event data payload follows
+ *
+ * This object stored on ioc->fw_event_list.
+ */
+struct fw_event_work {
+	struct list_head	list;
+	struct work_struct	work;
+
+	struct MPT3SAS_ADAPTER *ioc;
+	u16			device_handle;
+	u8			VF_ID;
+	u8			VP_ID;
+	u8			ignore;
+	u16			event;
+	struct kref		refcount;
+	char			event_data[0] __aligned(4);
+};
+
+static void fw_event_work_free(struct kref *r)
+{
+	kfree(container_of(r, struct fw_event_work, refcount));
+}
+
+static void fw_event_work_get(struct fw_event_work *fw_work)
+{
+	kref_get(&fw_work->refcount);
+}
+
+static void fw_event_work_put(struct fw_event_work *fw_work)
+{
+	kref_put(&fw_work->refcount, fw_event_work_free);
+}
+
+static struct fw_event_work *alloc_fw_event_work(int len)
+{
+	struct fw_event_work *fw_event;
+
+	fw_event = kzalloc(sizeof(*fw_event) + len, GFP_ATOMIC);
+	if (!fw_event)
+		return NULL;
+
+	kref_init(&fw_event->refcount);
+	return fw_event;
+}
+
+/**
+ * struct _scsi_io_transfer - scsi io transfer
+ * @handle: sas device handle (assigned by firmware)
+ * @is_raid: flag set for hidden raid components
+ * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE,
+ * @data_length: data transfer length
+ * @data_dma: dma pointer to data
+ * @sense: sense data
+ * @lun: lun number
+ * @cdb_length: cdb length
+ * @cdb: cdb contents
+ * @timeout: timeout for this command
+ * @VF_ID: virtual function id
+ * @VP_ID: virtual port id
+ * @valid_reply: flag set for reply message
+ * @sense_length: sense length
+ * @ioc_status: ioc status
+ * @scsi_state: scsi state
+ * @scsi_status: scsi staus
+ * @log_info: log information
+ * @transfer_length: data length transfer when there is a reply message
+ *
+ * Used for sending internal scsi commands to devices within this module.
+ * Refer to _scsi_send_scsi_io().
+ */
+struct _scsi_io_transfer {
+	u16	handle;
+	u8	is_raid;
+	enum dma_data_direction dir;
+	u32	data_length;
+	dma_addr_t data_dma;
+	u8	sense[SCSI_SENSE_BUFFERSIZE];
+	u32	lun;
+	u8	cdb_length;
+	u8	cdb[32];
+	u8	timeout;
+	u8	VF_ID;
+	u8	VP_ID;
+	u8	valid_reply;
+  /* the following bits are only valid when 'valid_reply = 1' */
+	u32	sense_length;
+	u16	ioc_status;
+	u8	scsi_state;
+	u8	scsi_status;
+	u32	log_info;
+	u32	transfer_length;
+};
+
+/**
+ * _scsih_set_debug_level - global setting of ioc->logging_level.
+ * @val: ?
+ * @kp: ?
+ *
+ * Note: The logging levels are defined in mpt3sas_debug.h.
+ */
+static int
+_scsih_set_debug_level(const char *val, const struct kernel_param *kp)
+{
+	int ret = param_set_int(val, kp);
+	struct MPT3SAS_ADAPTER *ioc;
+
+	if (ret)
+		return ret;
+
+	pr_info("setting logging_level(0x%08x)\n", logging_level);
+	spin_lock(&gioc_lock);
+	list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
+		ioc->logging_level = logging_level;
+	spin_unlock(&gioc_lock);
+	return 0;
+}
+module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
+	&logging_level, 0644);
+
+/**
+ * _scsih_srch_boot_sas_address - search based on sas_address
+ * @sas_address: sas address
+ * @boot_device: boot device object from bios page 2
+ *
+ * Return: 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_sas_address(u64 sas_address,
+	Mpi2BootDeviceSasWwid_t *boot_device)
+{
+	return (sas_address == le64_to_cpu(boot_device->SASAddress)) ?  1 : 0;
+}
+
+/**
+ * _scsih_srch_boot_device_name - search based on device name
+ * @device_name: device name specified in INDENTIFY fram
+ * @boot_device: boot device object from bios page 2
+ *
+ * Return: 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_device_name(u64 device_name,
+	Mpi2BootDeviceDeviceName_t *boot_device)
+{
+	return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0;
+}
+
+/**
+ * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot
+ * @enclosure_logical_id: enclosure logical id
+ * @slot_number: slot number
+ * @boot_device: boot device object from bios page 2
+ *
+ * Return: 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number,
+	Mpi2BootDeviceEnclosureSlot_t *boot_device)
+{
+	return (enclosure_logical_id == le64_to_cpu(boot_device->
+	    EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device->
+	    SlotNumber)) ? 1 : 0;
+}
+
+/**
+ * _scsih_is_boot_device - search for matching boot device.
+ * @sas_address: sas address
+ * @device_name: device name specified in INDENTIFY fram
+ * @enclosure_logical_id: enclosure logical id
+ * @slot: slot number
+ * @form: specifies boot device form
+ * @boot_device: boot device object from bios page 2
+ *
+ * Return: 1 when there's a match, 0 means no match.
+ */
+static int
+_scsih_is_boot_device(u64 sas_address, u64 device_name,
+	u64 enclosure_logical_id, u16 slot, u8 form,
+	Mpi2BiosPage2BootDevice_t *boot_device)
+{
+	int rc = 0;
+
+	switch (form) {
+	case MPI2_BIOSPAGE2_FORM_SAS_WWID:
+		if (!sas_address)
+			break;
+		rc = _scsih_srch_boot_sas_address(
+		    sas_address, &boot_device->SasWwid);
+		break;
+	case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT:
+		if (!enclosure_logical_id)
+			break;
+		rc = _scsih_srch_boot_encl_slot(
+		    enclosure_logical_id,
+		    slot, &boot_device->EnclosureSlot);
+		break;
+	case MPI2_BIOSPAGE2_FORM_DEVICE_NAME:
+		if (!device_name)
+			break;
+		rc = _scsih_srch_boot_device_name(
+		    device_name, &boot_device->DeviceName);
+		break;
+	case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED:
+		break;
+	}
+
+	return rc;
+}
+
+/**
+ * _scsih_get_sas_address - set the sas_address for given device handle
+ * @ioc: ?
+ * @handle: device handle
+ * @sas_address: sas address
+ *
+ * Return: 0 success, non-zero when failure
+ */
+static int
+_scsih_get_sas_address(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u64 *sas_address)
+{
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 ioc_status;
+
+	*sas_address = 0;
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
+		__FILE__, __LINE__, __func__);
+		return -ENXIO;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+		/* For HBA, vSES doesn't return HBA SAS address. Instead return
+		 * vSES's sas address.
+		 */
+		if ((handle <= ioc->sas_hba.num_phys) &&
+		   (!(le32_to_cpu(sas_device_pg0.DeviceInfo) &
+		   MPI2_SAS_DEVICE_INFO_SEP)))
+			*sas_address = ioc->sas_hba.sas_address;
+		else
+			*sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+		return 0;
+	}
+
+	/* we hit this because the given parent handle doesn't exist */
+	if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+		return -ENXIO;
+
+	/* else error case */
+	pr_err(MPT3SAS_FMT
+		"handle(0x%04x), ioc_status(0x%04x), failure at %s:%d/%s()!\n",
+		ioc->name, handle, ioc_status,
+	     __FILE__, __LINE__, __func__);
+	return -EIO;
+}
+
+/**
+ * _scsih_determine_boot_device - determine boot device.
+ * @ioc: per adapter object
+ * @device: sas_device or pcie_device object
+ * @channel: SAS or PCIe channel
+ *
+ * Determines whether this device should be first reported device to
+ * to scsi-ml or sas transport, this purpose is for persistent boot device.
+ * There are primary, alternate, and current entries in bios page 2. The order
+ * priority is primary, alternate, then current.  This routine saves
+ * the corresponding device object.
+ * The saved data to be used later in _scsih_probe_boot_devices().
+ */
+static void
+_scsih_determine_boot_device(struct MPT3SAS_ADAPTER *ioc, void *device,
+	u32 channel)
+{
+	struct _sas_device *sas_device;
+	struct _pcie_device *pcie_device;
+	struct _raid_device *raid_device;
+	u64 sas_address;
+	u64 device_name;
+	u64 enclosure_logical_id;
+	u16 slot;
+
+	 /* only process this function when driver loads */
+	if (!ioc->is_driver_loading)
+		return;
+
+	 /* no Bios, return immediately */
+	if (!ioc->bios_pg3.BiosVersion)
+		return;
+
+	if (channel == RAID_CHANNEL) {
+		raid_device = device;
+		sas_address = raid_device->wwid;
+		device_name = 0;
+		enclosure_logical_id = 0;
+		slot = 0;
+	} else if (channel == PCIE_CHANNEL) {
+		pcie_device = device;
+		sas_address = pcie_device->wwid;
+		device_name = 0;
+		enclosure_logical_id = 0;
+		slot = 0;
+	} else {
+		sas_device = device;
+		sas_address = sas_device->sas_address;
+		device_name = sas_device->device_name;
+		enclosure_logical_id = sas_device->enclosure_logical_id;
+		slot = sas_device->slot;
+	}
+
+	if (!ioc->req_boot_device.device) {
+		if (_scsih_is_boot_device(sas_address, device_name,
+		    enclosure_logical_id, slot,
+		    (ioc->bios_pg2.ReqBootDeviceForm &
+		    MPI2_BIOSPAGE2_FORM_MASK),
+		    &ioc->bios_pg2.RequestedBootDevice)) {
+			dinitprintk(ioc, pr_info(MPT3SAS_FMT
+			   "%s: req_boot_device(0x%016llx)\n",
+			    ioc->name, __func__,
+			    (unsigned long long)sas_address));
+			ioc->req_boot_device.device = device;
+			ioc->req_boot_device.channel = channel;
+		}
+	}
+
+	if (!ioc->req_alt_boot_device.device) {
+		if (_scsih_is_boot_device(sas_address, device_name,
+		    enclosure_logical_id, slot,
+		    (ioc->bios_pg2.ReqAltBootDeviceForm &
+		    MPI2_BIOSPAGE2_FORM_MASK),
+		    &ioc->bios_pg2.RequestedAltBootDevice)) {
+			dinitprintk(ioc, pr_info(MPT3SAS_FMT
+			   "%s: req_alt_boot_device(0x%016llx)\n",
+			    ioc->name, __func__,
+			    (unsigned long long)sas_address));
+			ioc->req_alt_boot_device.device = device;
+			ioc->req_alt_boot_device.channel = channel;
+		}
+	}
+
+	if (!ioc->current_boot_device.device) {
+		if (_scsih_is_boot_device(sas_address, device_name,
+		    enclosure_logical_id, slot,
+		    (ioc->bios_pg2.CurrentBootDeviceForm &
+		    MPI2_BIOSPAGE2_FORM_MASK),
+		    &ioc->bios_pg2.CurrentBootDevice)) {
+			dinitprintk(ioc, pr_info(MPT3SAS_FMT
+			   "%s: current_boot_device(0x%016llx)\n",
+			    ioc->name, __func__,
+			    (unsigned long long)sas_address));
+			ioc->current_boot_device.device = device;
+			ioc->current_boot_device.channel = channel;
+		}
+	}
+}
+
+static struct _sas_device *
+__mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+		struct MPT3SAS_TARGET *tgt_priv)
+{
+	struct _sas_device *ret;
+
+	assert_spin_locked(&ioc->sas_device_lock);
+
+	ret = tgt_priv->sas_dev;
+	if (ret)
+		sas_device_get(ret);
+
+	return ret;
+}
+
+static struct _sas_device *
+mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+		struct MPT3SAS_TARGET *tgt_priv)
+{
+	struct _sas_device *ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	ret = __mpt3sas_get_sdev_from_target(ioc, tgt_priv);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return ret;
+}
+
+static struct _pcie_device *
+__mpt3sas_get_pdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+	struct MPT3SAS_TARGET *tgt_priv)
+{
+	struct _pcie_device *ret;
+
+	assert_spin_locked(&ioc->pcie_device_lock);
+
+	ret = tgt_priv->pcie_dev;
+	if (ret)
+		pcie_device_get(ret);
+
+	return ret;
+}
+
+/**
+ * mpt3sas_get_pdev_from_target - pcie device search
+ * @ioc: per adapter object
+ * @tgt_priv: starget private object
+ *
+ * Context: This function will acquire ioc->pcie_device_lock and will release
+ * before returning the pcie_device object.
+ *
+ * This searches for pcie_device from target, then return pcie_device object.
+ */
+static struct _pcie_device *
+mpt3sas_get_pdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+	struct MPT3SAS_TARGET *tgt_priv)
+{
+	struct _pcie_device *ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	ret = __mpt3sas_get_pdev_from_target(ioc, tgt_priv);
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	return ret;
+}
+
+struct _sas_device *
+__mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc,
+					u64 sas_address)
+{
+	struct _sas_device *sas_device;
+
+	assert_spin_locked(&ioc->sas_device_lock);
+
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list)
+		if (sas_device->sas_address == sas_address)
+			goto found_device;
+
+	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
+		if (sas_device->sas_address == sas_address)
+			goto found_device;
+
+	return NULL;
+
+found_device:
+	sas_device_get(sas_device);
+	return sas_device;
+}
+
+/**
+ * mpt3sas_get_sdev_by_addr - sas device search
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for sas_device based on sas_address, then return sas_device
+ * object.
+ */
+struct _sas_device *
+mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+			sas_address);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return sas_device;
+}
+
+static struct _sas_device *
+__mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_device *sas_device;
+
+	assert_spin_locked(&ioc->sas_device_lock);
+
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list)
+		if (sas_device->handle == handle)
+			goto found_device;
+
+	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
+		if (sas_device->handle == handle)
+			goto found_device;
+
+	return NULL;
+
+found_device:
+	sas_device_get(sas_device);
+	return sas_device;
+}
+
+/**
+ * mpt3sas_get_sdev_by_handle - sas device search
+ * @ioc: per adapter object
+ * @handle: sas device handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for sas_device based on sas_address, then return sas_device
+ * object.
+ */
+struct _sas_device *
+mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return sas_device;
+}
+
+/**
+ * _scsih_display_enclosure_chassis_info - display device location info
+ * @ioc: per adapter object
+ * @sas_device: per sas device object
+ * @sdev: scsi device struct
+ * @starget: scsi target struct
+ */
+static void
+_scsih_display_enclosure_chassis_info(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device, struct scsi_device *sdev,
+	struct scsi_target *starget)
+{
+	if (sdev) {
+		if (sas_device->enclosure_handle != 0)
+			sdev_printk(KERN_INFO, sdev,
+			    "enclosure logical id (0x%016llx), slot(%d) \n",
+			    (unsigned long long)
+			    sas_device->enclosure_logical_id,
+			    sas_device->slot);
+		if (sas_device->connector_name[0] != '\0')
+			sdev_printk(KERN_INFO, sdev,
+			    "enclosure level(0x%04x), connector name( %s)\n",
+			    sas_device->enclosure_level,
+			    sas_device->connector_name);
+		if (sas_device->is_chassis_slot_valid)
+			sdev_printk(KERN_INFO, sdev, "chassis slot(0x%04x)\n",
+			    sas_device->chassis_slot);
+	} else if (starget) {
+		if (sas_device->enclosure_handle != 0)
+			starget_printk(KERN_INFO, starget,
+			    "enclosure logical id(0x%016llx), slot(%d) \n",
+			    (unsigned long long)
+			    sas_device->enclosure_logical_id,
+			    sas_device->slot);
+		if (sas_device->connector_name[0] != '\0')
+			starget_printk(KERN_INFO, starget,
+			    "enclosure level(0x%04x), connector name( %s)\n",
+			    sas_device->enclosure_level,
+			    sas_device->connector_name);
+		if (sas_device->is_chassis_slot_valid)
+			starget_printk(KERN_INFO, starget,
+			    "chassis slot(0x%04x)\n",
+			    sas_device->chassis_slot);
+	} else {
+		if (sas_device->enclosure_handle != 0)
+			pr_info(MPT3SAS_FMT
+			    "enclosure logical id(0x%016llx), slot(%d) \n",
+			    ioc->name, (unsigned long long)
+			    sas_device->enclosure_logical_id,
+			    sas_device->slot);
+		if (sas_device->connector_name[0] != '\0')
+			pr_info(MPT3SAS_FMT
+			    "enclosure level(0x%04x), connector name( %s)\n",
+			    ioc->name, sas_device->enclosure_level,
+			    sas_device->connector_name);
+		if (sas_device->is_chassis_slot_valid)
+			pr_info(MPT3SAS_FMT "chassis slot(0x%04x)\n",
+			    ioc->name, sas_device->chassis_slot);
+	}
+}
+
+/**
+ * _scsih_sas_device_remove - remove sas_device from list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * If sas_device is on the list, remove it and decrement its reference count.
+ */
+static void
+_scsih_sas_device_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	if (!sas_device)
+		return;
+	pr_info(MPT3SAS_FMT
+	    "removing handle(0x%04x), sas_addr(0x%016llx)\n",
+	    ioc->name, sas_device->handle,
+	    (unsigned long long) sas_device->sas_address);
+
+	_scsih_display_enclosure_chassis_info(ioc, sas_device, NULL, NULL);
+
+	/*
+	 * The lock serializes access to the list, but we still need to verify
+	 * that nobody removed the entry while we were waiting on the lock.
+	 */
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	if (!list_empty(&sas_device->list)) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_device_remove_by_handle - removing device object by handle
+ * @ioc: per adapter object
+ * @handle: device handle
+ */
+static void
+_scsih_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	if (ioc->shost_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (sas_device) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (sas_device) {
+		_scsih_remove_device(ioc, sas_device);
+		sas_device_put(sas_device);
+	}
+}
+
+/**
+ * mpt3sas_device_remove_by_sas_address - removing device object by sas address
+ * @ioc: per adapter object
+ * @sas_address: device sas_address
+ */
+void
+mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	if (ioc->shost_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc, sas_address);
+	if (sas_device) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (sas_device) {
+		_scsih_remove_device(ioc, sas_device);
+		sas_device_put(sas_device);
+	}
+}
+
+/**
+ * _scsih_sas_device_add - insert sas_device to the list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * Adding new object to the ioc->sas_device_list.
+ */
+static void
+_scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: handle(0x%04x), sas_addr(0x%016llx)\n",
+		ioc->name, __func__, sas_device->handle,
+		(unsigned long long)sas_device->sas_address));
+
+	dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+	    NULL, NULL));
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device_get(sas_device);
+	list_add_tail(&sas_device->list, &ioc->sas_device_list);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (ioc->hide_drives) {
+		clear_bit(sas_device->handle, ioc->pend_os_device_add);
+		return;
+	}
+
+	if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
+	     sas_device->sas_address_parent)) {
+		_scsih_sas_device_remove(ioc, sas_device);
+	} else if (!sas_device->starget) {
+		/*
+		 * When asyn scanning is enabled, its not possible to remove
+		 * devices while scanning is turned on due to an oops in
+		 * scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start()
+		 */
+		if (!ioc->is_driver_loading) {
+			mpt3sas_transport_port_remove(ioc,
+			    sas_device->sas_address,
+			    sas_device->sas_address_parent);
+			_scsih_sas_device_remove(ioc, sas_device);
+		}
+	} else
+		clear_bit(sas_device->handle, ioc->pend_os_device_add);
+}
+
+/**
+ * _scsih_sas_device_init_add - insert sas_device to the list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * Adding new object at driver load time to the ioc->sas_device_init_list.
+ */
+static void
+_scsih_sas_device_init_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name,
+		__func__, sas_device->handle,
+		(unsigned long long)sas_device->sas_address));
+
+	dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+	    NULL, NULL));
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device_get(sas_device);
+	list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
+	_scsih_determine_boot_device(ioc, sas_device, 0);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+
+static struct _pcie_device *
+__mpt3sas_get_pdev_by_wwid(struct MPT3SAS_ADAPTER *ioc, u64 wwid)
+{
+	struct _pcie_device *pcie_device;
+
+	assert_spin_locked(&ioc->pcie_device_lock);
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list)
+		if (pcie_device->wwid == wwid)
+			goto found_device;
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_init_list, list)
+		if (pcie_device->wwid == wwid)
+			goto found_device;
+
+	return NULL;
+
+found_device:
+	pcie_device_get(pcie_device);
+	return pcie_device;
+}
+
+
+/**
+ * mpt3sas_get_pdev_by_wwid - pcie device search
+ * @ioc: per adapter object
+ * @wwid: wwid
+ *
+ * Context: This function will acquire ioc->pcie_device_lock and will release
+ * before returning the pcie_device object.
+ *
+ * This searches for pcie_device based on wwid, then return pcie_device object.
+ */
+static struct _pcie_device *
+mpt3sas_get_pdev_by_wwid(struct MPT3SAS_ADAPTER *ioc, u64 wwid)
+{
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device = __mpt3sas_get_pdev_by_wwid(ioc, wwid);
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	return pcie_device;
+}
+
+
+static struct _pcie_device *
+__mpt3sas_get_pdev_by_idchannel(struct MPT3SAS_ADAPTER *ioc, int id,
+	int channel)
+{
+	struct _pcie_device *pcie_device;
+
+	assert_spin_locked(&ioc->pcie_device_lock);
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list)
+		if (pcie_device->id == id && pcie_device->channel == channel)
+			goto found_device;
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_init_list, list)
+		if (pcie_device->id == id && pcie_device->channel == channel)
+			goto found_device;
+
+	return NULL;
+
+found_device:
+	pcie_device_get(pcie_device);
+	return pcie_device;
+}
+
+static struct _pcie_device *
+__mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _pcie_device *pcie_device;
+
+	assert_spin_locked(&ioc->pcie_device_lock);
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list)
+		if (pcie_device->handle == handle)
+			goto found_device;
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_init_list, list)
+		if (pcie_device->handle == handle)
+			goto found_device;
+
+	return NULL;
+
+found_device:
+	pcie_device_get(pcie_device);
+	return pcie_device;
+}
+
+
+/**
+ * mpt3sas_get_pdev_by_handle - pcie device search
+ * @ioc: per adapter object
+ * @handle: Firmware device handle
+ *
+ * Context: This function will acquire ioc->pcie_device_lock and will release
+ * before returning the pcie_device object.
+ *
+ * This searches for pcie_device based on handle, then return pcie_device
+ * object.
+ */
+struct _pcie_device *
+mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	return pcie_device;
+}
+
+/**
+ * _scsih_pcie_device_remove - remove pcie_device from list.
+ * @ioc: per adapter object
+ * @pcie_device: the pcie_device object
+ * Context: This function will acquire ioc->pcie_device_lock.
+ *
+ * If pcie_device is on the list, remove it and decrement its reference count.
+ */
+static void
+_scsih_pcie_device_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _pcie_device *pcie_device)
+{
+	unsigned long flags;
+	int was_on_pcie_device_list = 0;
+
+	if (!pcie_device)
+		return;
+	pr_info(MPT3SAS_FMT
+		"removing handle(0x%04x), wwid(0x%016llx)\n",
+		ioc->name, pcie_device->handle,
+		(unsigned long long) pcie_device->wwid);
+	if (pcie_device->enclosure_handle != 0)
+		pr_info(MPT3SAS_FMT
+			"removing enclosure logical id(0x%016llx), slot(%d)\n",
+			ioc->name,
+			(unsigned long long)pcie_device->enclosure_logical_id,
+		pcie_device->slot);
+	if (pcie_device->connector_name[0] != '\0')
+		pr_info(MPT3SAS_FMT
+		    "removing enclosure level(0x%04x), connector name( %s)\n",
+			ioc->name, pcie_device->enclosure_level,
+			pcie_device->connector_name);
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	if (!list_empty(&pcie_device->list)) {
+		list_del_init(&pcie_device->list);
+		was_on_pcie_device_list = 1;
+	}
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+	if (was_on_pcie_device_list) {
+		kfree(pcie_device->serial_number);
+		pcie_device_put(pcie_device);
+	}
+}
+
+
+/**
+ * _scsih_pcie_device_remove_by_handle - removing pcie device object by handle
+ * @ioc: per adapter object
+ * @handle: device handle
+ */
+static void
+_scsih_pcie_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+	int was_on_pcie_device_list = 0;
+
+	if (ioc->shost_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+	if (pcie_device) {
+		if (!list_empty(&pcie_device->list)) {
+			list_del_init(&pcie_device->list);
+			was_on_pcie_device_list = 1;
+			pcie_device_put(pcie_device);
+		}
+	}
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+	if (was_on_pcie_device_list) {
+		_scsih_pcie_device_remove_from_sml(ioc, pcie_device);
+		pcie_device_put(pcie_device);
+	}
+}
+
+/**
+ * _scsih_pcie_device_add - add pcie_device object
+ * @ioc: per adapter object
+ * @pcie_device: pcie_device object
+ *
+ * This is added to the pcie_device_list link list.
+ */
+static void
+_scsih_pcie_device_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _pcie_device *pcie_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: handle (0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+		pcie_device->handle, (unsigned long long)pcie_device->wwid));
+	if (pcie_device->enclosure_handle != 0)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: enclosure logical id(0x%016llx), slot( %d)\n",
+			ioc->name, __func__,
+			(unsigned long long)pcie_device->enclosure_logical_id,
+			pcie_device->slot));
+	if (pcie_device->connector_name[0] != '\0')
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: enclosure level(0x%04x), connector name( %s)\n",
+			ioc->name, __func__, pcie_device->enclosure_level,
+			pcie_device->connector_name));
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device_get(pcie_device);
+	list_add_tail(&pcie_device->list, &ioc->pcie_device_list);
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	if (scsi_add_device(ioc->shost, PCIE_CHANNEL, pcie_device->id, 0)) {
+		_scsih_pcie_device_remove(ioc, pcie_device);
+	} else if (!pcie_device->starget) {
+		if (!ioc->is_driver_loading) {
+/*TODO-- Need to find out whether this condition will occur or not*/
+			clear_bit(pcie_device->handle, ioc->pend_os_device_add);
+		}
+	} else
+		clear_bit(pcie_device->handle, ioc->pend_os_device_add);
+}
+
+/*
+ * _scsih_pcie_device_init_add - insert pcie_device to the init list.
+ * @ioc: per adapter object
+ * @pcie_device: the pcie_device object
+ * Context: This function will acquire ioc->pcie_device_lock.
+ *
+ * Adding new object at driver load time to the ioc->pcie_device_init_list.
+ */
+static void
+_scsih_pcie_device_init_add(struct MPT3SAS_ADAPTER *ioc,
+				struct _pcie_device *pcie_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: handle (0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+		pcie_device->handle, (unsigned long long)pcie_device->wwid));
+	if (pcie_device->enclosure_handle != 0)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: enclosure logical id(0x%016llx), slot( %d)\n",
+			ioc->name, __func__,
+			(unsigned long long)pcie_device->enclosure_logical_id,
+			pcie_device->slot));
+	if (pcie_device->connector_name[0] != '\0')
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: enclosure level(0x%04x), connector name( %s)\n",
+			ioc->name, __func__, pcie_device->enclosure_level,
+			pcie_device->connector_name));
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device_get(pcie_device);
+	list_add_tail(&pcie_device->list, &ioc->pcie_device_init_list);
+	_scsih_determine_boot_device(ioc, pcie_device, PCIE_CHANNEL);
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+/**
+ * _scsih_raid_device_find_by_id - raid device search
+ * @ioc: per adapter object
+ * @id: sas device target id
+ * @channel: sas device channel
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on target id, then return raid_device
+ * object.
+ */
+static struct _raid_device *
+_scsih_raid_device_find_by_id(struct MPT3SAS_ADAPTER *ioc, int id, int channel)
+{
+	struct _raid_device *raid_device, *r;
+
+	r = NULL;
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->id == id && raid_device->channel == channel) {
+			r = raid_device;
+			goto out;
+		}
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_raid_device_find_by_handle - raid device search
+ * @ioc: per adapter object
+ * @handle: sas device handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on handle, then return raid_device
+ * object.
+ */
+struct _raid_device *
+mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _raid_device *raid_device, *r;
+
+	r = NULL;
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->handle != handle)
+			continue;
+		r = raid_device;
+		goto out;
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * _scsih_raid_device_find_by_wwid - raid device search
+ * @ioc: per adapter object
+ * @wwid: ?
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on wwid, then return raid_device
+ * object.
+ */
+static struct _raid_device *
+_scsih_raid_device_find_by_wwid(struct MPT3SAS_ADAPTER *ioc, u64 wwid)
+{
+	struct _raid_device *raid_device, *r;
+
+	r = NULL;
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->wwid != wwid)
+			continue;
+		r = raid_device;
+		goto out;
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * _scsih_raid_device_add - add raid_device object
+ * @ioc: per adapter object
+ * @raid_device: raid_device object
+ *
+ * This is added to the raid_device_list link list.
+ */
+static void
+_scsih_raid_device_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: handle(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+	    raid_device->handle, (unsigned long long)raid_device->wwid));
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	list_add_tail(&raid_device->list, &ioc->raid_device_list);
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * _scsih_raid_device_remove - delete raid_device object
+ * @ioc: per adapter object
+ * @raid_device: raid_device object
+ *
+ */
+static void
+_scsih_raid_device_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	list_del(&raid_device->list);
+	kfree(raid_device);
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * mpt3sas_scsih_expander_find_by_handle - expander device search
+ * @ioc: per adapter object
+ * @handle: expander handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for expander device based on handle, then returns the
+ * sas_node object.
+ */
+struct _sas_node *
+mpt3sas_scsih_expander_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_node *sas_expander, *r;
+
+	r = NULL;
+	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+		if (sas_expander->handle != handle)
+			continue;
+		r = sas_expander;
+		goto out;
+	}
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_scsih_enclosure_find_by_handle - exclosure device search
+ * @ioc: per adapter object
+ * @handle: enclosure handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for enclosure device based on handle, then returns the
+ * enclosure object.
+ */
+static struct _enclosure_node *
+mpt3sas_scsih_enclosure_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _enclosure_node *enclosure_dev, *r;
+
+	r = NULL;
+	list_for_each_entry(enclosure_dev, &ioc->enclosure_list, list) {
+		if (le16_to_cpu(enclosure_dev->pg0.EnclosureHandle) != handle)
+			continue;
+		r = enclosure_dev;
+		goto out;
+	}
+out:
+	return r;
+}
+/**
+ * mpt3sas_scsih_expander_find_by_sas_address - expander device search
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * Context: Calling function should acquire ioc->sas_node_lock.
+ *
+ * This searches for expander device based on sas_address, then returns the
+ * sas_node object.
+ */
+struct _sas_node *
+mpt3sas_scsih_expander_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address)
+{
+	struct _sas_node *sas_expander, *r;
+
+	r = NULL;
+	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+		if (sas_expander->sas_address != sas_address)
+			continue;
+		r = sas_expander;
+		goto out;
+	}
+ out:
+	return r;
+}
+
+/**
+ * _scsih_expander_node_add - insert expander device to the list.
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ * Context: This function will acquire ioc->sas_node_lock.
+ *
+ * Adding new object to the ioc->sas_expander_list.
+ */
+static void
+_scsih_expander_node_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	list_add_tail(&sas_expander->list, &ioc->sas_expander_list);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+}
+
+/**
+ * _scsih_is_end_device - determines if device is an end device
+ * @device_info: bitfield providing information about the device.
+ * Context: none
+ *
+ * Return: 1 if end device.
+ */
+static int
+_scsih_is_end_device(u32 device_info)
+{
+	if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE &&
+		((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) |
+		(device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) |
+		(device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * _scsih_is_nvme_device - determines if device is an nvme device
+ * @device_info: bitfield providing information about the device.
+ * Context: none
+ *
+ * Return: 1 if nvme device.
+ */
+static int
+_scsih_is_nvme_device(u32 device_info)
+{
+	if ((device_info & MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE)
+					== MPI26_PCIE_DEVINFO_NVME)
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * mpt3sas_scsih_scsi_lookup_get - returns scmd entry
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: the smid stored scmd pointer.
+ * Then will dereference the stored scmd pointer.
+ */
+struct scsi_cmnd *
+mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	struct scsi_cmnd *scmd = NULL;
+	struct scsiio_tracker *st;
+	Mpi25SCSIIORequest_t *mpi_request;
+
+	if (smid > 0  &&
+	    smid <= ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT) {
+		u32 unique_tag = smid - 1;
+
+		mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+		/*
+		 * If SCSI IO request is outstanding at driver level then
+		 * DevHandle filed must be non-zero. If DevHandle is zero
+		 * then it means that this smid is free at driver level,
+		 * so return NULL.
+		 */
+		if (!mpi_request->DevHandle)
+			return scmd;
+
+		scmd = scsi_host_find_tag(ioc->shost, unique_tag);
+		if (scmd) {
+			st = scsi_cmd_priv(scmd);
+			if (st->cb_idx == 0xFF || st->smid == 0)
+				scmd = NULL;
+		}
+	}
+	return scmd;
+}
+
+/**
+ * scsih_change_queue_depth - setting device queue depth
+ * @sdev: scsi device struct
+ * @qdepth: requested queue depth
+ *
+ * Return: queue depth.
+ */
+static int
+scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+	struct Scsi_Host *shost = sdev->host;
+	int max_depth;
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	max_depth = shost->can_queue;
+
+	/* limit max device queue for SATA to 32 */
+	sas_device_priv_data = sdev->hostdata;
+	if (!sas_device_priv_data)
+		goto not_sata;
+	sas_target_priv_data = sas_device_priv_data->sas_target;
+	if (!sas_target_priv_data)
+		goto not_sata;
+	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
+		goto not_sata;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
+	if (sas_device) {
+		if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+			max_depth = MPT3SAS_SATA_QUEUE_DEPTH;
+
+		sas_device_put(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ not_sata:
+
+	if (!sdev->tagged_supported)
+		max_depth = 1;
+	if (qdepth > max_depth)
+		qdepth = max_depth;
+	return scsi_change_queue_depth(sdev, qdepth);
+}
+
+/**
+ * scsih_target_alloc - target add routine
+ * @starget: scsi target struct
+ *
+ * Return: 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+scsih_target_alloc(struct scsi_target *starget)
+{
+	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	struct _raid_device *raid_device;
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+	struct sas_rphy *rphy;
+
+	sas_target_priv_data = kzalloc(sizeof(*sas_target_priv_data),
+				       GFP_KERNEL);
+	if (!sas_target_priv_data)
+		return -ENOMEM;
+
+	starget->hostdata = sas_target_priv_data;
+	sas_target_priv_data->starget = starget;
+	sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+
+	/* RAID volumes */
+	if (starget->channel == RAID_CHANNEL) {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
+		    starget->channel);
+		if (raid_device) {
+			sas_target_priv_data->handle = raid_device->handle;
+			sas_target_priv_data->sas_address = raid_device->wwid;
+			sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
+			if (ioc->is_warpdrive)
+				sas_target_priv_data->raid_device = raid_device;
+			raid_device->starget = starget;
+		}
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		return 0;
+	}
+
+	/* PCIe devices */
+	if (starget->channel == PCIE_CHANNEL) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_by_idchannel(ioc, starget->id,
+			starget->channel);
+		if (pcie_device) {
+			sas_target_priv_data->handle = pcie_device->handle;
+			sas_target_priv_data->sas_address = pcie_device->wwid;
+			sas_target_priv_data->pcie_dev = pcie_device;
+			pcie_device->starget = starget;
+			pcie_device->id = starget->id;
+			pcie_device->channel = starget->channel;
+			sas_target_priv_data->flags |=
+				MPT_TARGET_FLAGS_PCIE_DEVICE;
+			if (pcie_device->fast_path)
+				sas_target_priv_data->flags |=
+					MPT_TARGET_FASTPATH_IO;
+		}
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		return 0;
+	}
+
+	/* sas/sata devices */
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	rphy = dev_to_rphy(starget->dev.parent);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+	   rphy->identify.sas_address);
+
+	if (sas_device) {
+		sas_target_priv_data->handle = sas_device->handle;
+		sas_target_priv_data->sas_address = sas_device->sas_address;
+		sas_target_priv_data->sas_dev = sas_device;
+		sas_device->starget = starget;
+		sas_device->id = starget->id;
+		sas_device->channel = starget->channel;
+		if (test_bit(sas_device->handle, ioc->pd_handles))
+			sas_target_priv_data->flags |=
+			    MPT_TARGET_FLAGS_RAID_COMPONENT;
+		if (sas_device->fast_path)
+			sas_target_priv_data->flags |=
+					MPT_TARGET_FASTPATH_IO;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return 0;
+}
+
+/**
+ * scsih_target_destroy - target destroy routine
+ * @starget: scsi target struct
+ */
+static void
+scsih_target_destroy(struct scsi_target *starget)
+{
+	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	struct _raid_device *raid_device;
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	sas_target_priv_data = starget->hostdata;
+	if (!sas_target_priv_data)
+		return;
+
+	if (starget->channel == RAID_CHANNEL) {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
+		    starget->channel);
+		if (raid_device) {
+			raid_device->starget = NULL;
+			raid_device->sdev = NULL;
+		}
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		goto out;
+	}
+
+	if (starget->channel == PCIE_CHANNEL) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_from_target(ioc,
+							sas_target_priv_data);
+		if (pcie_device && (pcie_device->starget == starget) &&
+			(pcie_device->id == starget->id) &&
+			(pcie_device->channel == starget->channel))
+			pcie_device->starget = NULL;
+
+		if (pcie_device) {
+			/*
+			 * Corresponding get() is in _scsih_target_alloc()
+			 */
+			sas_target_priv_data->pcie_dev = NULL;
+			pcie_device_put(pcie_device);
+			pcie_device_put(pcie_device);
+		}
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		goto out;
+	}
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
+	if (sas_device && (sas_device->starget == starget) &&
+	    (sas_device->id == starget->id) &&
+	    (sas_device->channel == starget->channel))
+		sas_device->starget = NULL;
+
+	if (sas_device) {
+		/*
+		 * Corresponding get() is in _scsih_target_alloc()
+		 */
+		sas_target_priv_data->sas_dev = NULL;
+		sas_device_put(sas_device);
+
+		sas_device_put(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ out:
+	kfree(sas_target_priv_data);
+	starget->hostdata = NULL;
+}
+
+/**
+ * scsih_slave_alloc - device add routine
+ * @sdev: scsi device struct
+ *
+ * Return: 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+scsih_slave_alloc(struct scsi_device *sdev)
+{
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_target *starget;
+	struct _raid_device *raid_device;
+	struct _sas_device *sas_device;
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	sas_device_priv_data = kzalloc(sizeof(*sas_device_priv_data),
+				       GFP_KERNEL);
+	if (!sas_device_priv_data)
+		return -ENOMEM;
+
+	sas_device_priv_data->lun = sdev->lun;
+	sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT;
+
+	starget = scsi_target(sdev);
+	sas_target_priv_data = starget->hostdata;
+	sas_target_priv_data->num_luns++;
+	sas_device_priv_data->sas_target = sas_target_priv_data;
+	sdev->hostdata = sas_device_priv_data;
+	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT))
+		sdev->no_uld_attach = 1;
+
+	shost = dev_to_shost(&starget->dev);
+	ioc = shost_priv(shost);
+	if (starget->channel == RAID_CHANNEL) {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_id(ioc,
+		    starget->id, starget->channel);
+		if (raid_device)
+			raid_device->sdev = sdev; /* raid is single lun */
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+	if (starget->channel == PCIE_CHANNEL) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_by_wwid(ioc,
+				sas_target_priv_data->sas_address);
+		if (pcie_device && (pcie_device->starget == NULL)) {
+			sdev_printk(KERN_INFO, sdev,
+			    "%s : pcie_device->starget set to starget @ %d\n",
+			    __func__, __LINE__);
+			pcie_device->starget = starget;
+		}
+
+		if (pcie_device)
+			pcie_device_put(pcie_device);
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	} else  if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+					sas_target_priv_data->sas_address);
+		if (sas_device && (sas_device->starget == NULL)) {
+			sdev_printk(KERN_INFO, sdev,
+			"%s : sas_device->starget set to starget @ %d\n",
+			     __func__, __LINE__);
+			sas_device->starget = starget;
+		}
+
+		if (sas_device)
+			sas_device_put(sas_device);
+
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+
+	return 0;
+}
+
+/**
+ * scsih_slave_destroy - device destroy routine
+ * @sdev: scsi device struct
+ */
+static void
+scsih_slave_destroy(struct scsi_device *sdev)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct scsi_target *starget;
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+	struct _sas_device *sas_device;
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	if (!sdev->hostdata)
+		return;
+
+	starget = scsi_target(sdev);
+	sas_target_priv_data = starget->hostdata;
+	sas_target_priv_data->num_luns--;
+
+	shost = dev_to_shost(&starget->dev);
+	ioc = shost_priv(shost);
+
+	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_from_target(ioc,
+				sas_target_priv_data);
+		if (pcie_device && !sas_target_priv_data->num_luns)
+			pcie_device->starget = NULL;
+
+		if (pcie_device)
+			pcie_device_put(pcie_device);
+
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	} else if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = __mpt3sas_get_sdev_from_target(ioc,
+				sas_target_priv_data);
+		if (sas_device && !sas_target_priv_data->num_luns)
+			sas_device->starget = NULL;
+
+		if (sas_device)
+			sas_device_put(sas_device);
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+
+	kfree(sdev->hostdata);
+	sdev->hostdata = NULL;
+}
+
+/**
+ * _scsih_display_sata_capabilities - sata capabilities
+ * @ioc: per adapter object
+ * @handle: device handle
+ * @sdev: scsi device struct
+ */
+static void
+_scsih_display_sata_capabilities(struct MPT3SAS_ADAPTER *ioc,
+	u16 handle, struct scsi_device *sdev)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
+	u16 flags;
+	u32 device_info;
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	flags = le16_to_cpu(sas_device_pg0.Flags);
+	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+
+	sdev_printk(KERN_INFO, sdev,
+	    "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), "
+	    "sw_preserve(%s)\n",
+	    (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" :
+	    "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n");
+}
+
+/*
+ * raid transport support -
+ * Enabled for SLES11 and newer, in older kernels the driver will panic when
+ * unloading the driver followed by a load - I believe that the subroutine
+ * raid_class_release() is not cleaning up properly.
+ */
+
+/**
+ * scsih_is_raid - return boolean indicating device is raid volume
+ * @dev: the device struct object
+ */
+static int
+scsih_is_raid(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
+
+	if (ioc->is_warpdrive)
+		return 0;
+	return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
+}
+
+static int
+scsih_is_nvme(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	return (sdev->channel == PCIE_CHANNEL) ? 1 : 0;
+}
+
+/**
+ * scsih_get_resync - get raid volume resync percent complete
+ * @dev: the device struct object
+ */
+static void
+scsih_get_resync(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	Mpi2RaidVolPage0_t vol_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 volume_status_flags;
+	u8 percent_complete;
+	u16 handle;
+
+	percent_complete = 0;
+	handle = 0;
+	if (ioc->is_warpdrive)
+		goto out;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
+	    sdev->channel);
+	if (raid_device) {
+		handle = raid_device->handle;
+		percent_complete = raid_device->percent_complete;
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+	if (!handle)
+		goto out;
+
+	if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+	     sizeof(Mpi2RaidVolPage0_t))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		percent_complete = 0;
+		goto out;
+	}
+
+	volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags);
+	if (!(volume_status_flags &
+	    MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS))
+		percent_complete = 0;
+
+ out:
+
+	switch (ioc->hba_mpi_version_belonged) {
+	case MPI2_VERSION:
+		raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
+		break;
+	case MPI25_VERSION:
+	case MPI26_VERSION:
+		raid_set_resync(mpt3sas_raid_template, dev, percent_complete);
+		break;
+	}
+}
+
+/**
+ * scsih_get_state - get raid volume level
+ * @dev: the device struct object
+ */
+static void
+scsih_get_state(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	Mpi2RaidVolPage0_t vol_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 volstate;
+	enum raid_state state = RAID_STATE_UNKNOWN;
+	u16 handle = 0;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
+	    sdev->channel);
+	if (raid_device)
+		handle = raid_device->handle;
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+	if (!raid_device)
+		goto out;
+
+	if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+	     sizeof(Mpi2RaidVolPage0_t))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags);
+	if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
+		state = RAID_STATE_RESYNCING;
+		goto out;
+	}
+
+	switch (vol_pg0.VolumeState) {
+	case MPI2_RAID_VOL_STATE_OPTIMAL:
+	case MPI2_RAID_VOL_STATE_ONLINE:
+		state = RAID_STATE_ACTIVE;
+		break;
+	case  MPI2_RAID_VOL_STATE_DEGRADED:
+		state = RAID_STATE_DEGRADED;
+		break;
+	case MPI2_RAID_VOL_STATE_FAILED:
+	case MPI2_RAID_VOL_STATE_MISSING:
+		state = RAID_STATE_OFFLINE;
+		break;
+	}
+ out:
+	switch (ioc->hba_mpi_version_belonged) {
+	case MPI2_VERSION:
+		raid_set_state(mpt2sas_raid_template, dev, state);
+		break;
+	case MPI25_VERSION:
+	case MPI26_VERSION:
+		raid_set_state(mpt3sas_raid_template, dev, state);
+		break;
+	}
+}
+
+/**
+ * _scsih_set_level - set raid level
+ * @ioc: ?
+ * @sdev: scsi device struct
+ * @volume_type: volume type
+ */
+static void
+_scsih_set_level(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_device *sdev, u8 volume_type)
+{
+	enum raid_level level = RAID_LEVEL_UNKNOWN;
+
+	switch (volume_type) {
+	case MPI2_RAID_VOL_TYPE_RAID0:
+		level = RAID_LEVEL_0;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID10:
+		level = RAID_LEVEL_10;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID1E:
+		level = RAID_LEVEL_1E;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID1:
+		level = RAID_LEVEL_1;
+		break;
+	}
+
+	switch (ioc->hba_mpi_version_belonged) {
+	case MPI2_VERSION:
+		raid_set_level(mpt2sas_raid_template,
+			&sdev->sdev_gendev, level);
+		break;
+	case MPI25_VERSION:
+	case MPI26_VERSION:
+		raid_set_level(mpt3sas_raid_template,
+			&sdev->sdev_gendev, level);
+		break;
+	}
+}
+
+
+/**
+ * _scsih_get_volume_capabilities - volume capabilities
+ * @ioc: per adapter object
+ * @raid_device: the raid_device object
+ *
+ * Return: 0 for success, else 1
+ */
+static int
+_scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	Mpi2RaidVolPage0_t *vol_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 sz;
+	u8 num_pds;
+
+	if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
+	    &num_pds)) || !num_pds) {
+		dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
+		return 1;
+	}
+
+	raid_device->num_pds = num_pds;
+	sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
+	    sizeof(Mpi2RaidVol0PhysDisk_t));
+	vol_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!vol_pg0) {
+		dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
+		return 1;
+	}
+
+	if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
+		dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
+		kfree(vol_pg0);
+		return 1;
+	}
+
+	raid_device->volume_type = vol_pg0->VolumeType;
+
+	/* figure out what the underlying devices are by
+	 * obtaining the device_info bits for the 1st device
+	 */
+	if (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+	    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
+	    vol_pg0->PhysDisk[0].PhysDiskNum))) {
+		if (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    le16_to_cpu(pd_pg0.DevHandle)))) {
+			raid_device->device_info =
+			    le32_to_cpu(sas_device_pg0.DeviceInfo);
+		}
+	}
+
+	kfree(vol_pg0);
+	return 0;
+}
+
+/**
+ * _scsih_enable_tlr - setting TLR flags
+ * @ioc: per adapter object
+ * @sdev: scsi device struct
+ *
+ * Enabling Transaction Layer Retries for tape devices when
+ * vpd page 0x90 is present
+ *
+ */
+static void
+_scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev)
+{
+
+	/* only for TAPE */
+	if (sdev->type != TYPE_TAPE)
+		return;
+
+	if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR))
+		return;
+
+	sas_enable_tlr(sdev);
+	sdev_printk(KERN_INFO, sdev, "TLR %s\n",
+	    sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled");
+	return;
+
+}
+
+/**
+ * scsih_slave_configure - device configure routine.
+ * @sdev: scsi device struct
+ *
+ * Return: 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+scsih_slave_configure(struct scsi_device *sdev)
+{
+	struct Scsi_Host *shost = sdev->host;
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	struct _pcie_device *pcie_device;
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	int qdepth;
+	u8 ssp_target = 0;
+	char *ds = "";
+	char *r_level = "";
+	u16 handle, volume_handle = 0;
+	u64 volume_wwid = 0;
+
+	qdepth = 1;
+	sas_device_priv_data = sdev->hostdata;
+	sas_device_priv_data->configured_lun = 1;
+	sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT;
+	sas_target_priv_data = sas_device_priv_data->sas_target;
+	handle = sas_target_priv_data->handle;
+
+	/* raid volume handling */
+	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
+
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		if (!raid_device) {
+			dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+			    __LINE__, __func__));
+			return 1;
+		}
+
+		if (_scsih_get_volume_capabilities(ioc, raid_device)) {
+			dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+			    __LINE__, __func__));
+			return 1;
+		}
+
+		/*
+		 * WARPDRIVE: Initialize the required data for Direct IO
+		 */
+		mpt3sas_init_warpdrive_properties(ioc, raid_device);
+
+		/* RAID Queue Depth Support
+		 * IS volume = underlying qdepth of drive type, either
+		 *    MPT3SAS_SAS_QUEUE_DEPTH or MPT3SAS_SATA_QUEUE_DEPTH
+		 * IM/IME/R10 = 128 (MPT3SAS_RAID_QUEUE_DEPTH)
+		 */
+		if (raid_device->device_info &
+		    MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
+			qdepth = MPT3SAS_SAS_QUEUE_DEPTH;
+			ds = "SSP";
+		} else {
+			qdepth = MPT3SAS_SATA_QUEUE_DEPTH;
+			if (raid_device->device_info &
+			    MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+				ds = "SATA";
+			else
+				ds = "STP";
+		}
+
+		switch (raid_device->volume_type) {
+		case MPI2_RAID_VOL_TYPE_RAID0:
+			r_level = "RAID0";
+			break;
+		case MPI2_RAID_VOL_TYPE_RAID1E:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			if (ioc->manu_pg10.OEMIdentifier &&
+			    (le32_to_cpu(ioc->manu_pg10.GenericFlags0) &
+			    MFG10_GF0_R10_DISPLAY) &&
+			    !(raid_device->num_pds % 2))
+				r_level = "RAID10";
+			else
+				r_level = "RAID1E";
+			break;
+		case MPI2_RAID_VOL_TYPE_RAID1:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			r_level = "RAID1";
+			break;
+		case MPI2_RAID_VOL_TYPE_RAID10:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			r_level = "RAID10";
+			break;
+		case MPI2_RAID_VOL_TYPE_UNKNOWN:
+		default:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			r_level = "RAIDX";
+			break;
+		}
+
+		if (!ioc->hide_ir_msg)
+			sdev_printk(KERN_INFO, sdev,
+			   "%s: handle(0x%04x), wwid(0x%016llx),"
+			    " pd_count(%d), type(%s)\n",
+			    r_level, raid_device->handle,
+			    (unsigned long long)raid_device->wwid,
+			    raid_device->num_pds, ds);
+
+		if (shost->max_sectors > MPT3SAS_RAID_MAX_SECTORS) {
+			blk_queue_max_hw_sectors(sdev->request_queue,
+						MPT3SAS_RAID_MAX_SECTORS);
+			sdev_printk(KERN_INFO, sdev,
+					"Set queue's max_sector to: %u\n",
+						MPT3SAS_RAID_MAX_SECTORS);
+		}
+
+		scsih_change_queue_depth(sdev, qdepth);
+
+		/* raid transport support */
+		if (!ioc->is_warpdrive)
+			_scsih_set_level(ioc, sdev, raid_device->volume_type);
+		return 0;
+	}
+
+	/* non-raid handling */
+	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		if (mpt3sas_config_get_volume_handle(ioc, handle,
+		    &volume_handle)) {
+			dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name,
+			    __FILE__, __LINE__, __func__));
+			return 1;
+		}
+		if (volume_handle && mpt3sas_config_get_volume_wwid(ioc,
+		    volume_handle, &volume_wwid)) {
+			dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name,
+			    __FILE__, __LINE__, __func__));
+			return 1;
+		}
+	}
+
+	/* PCIe handling */
+	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_by_wwid(ioc,
+				sas_device_priv_data->sas_target->sas_address);
+		if (!pcie_device) {
+			spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+			dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+				"failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+				__LINE__, __func__));
+			return 1;
+		}
+
+		qdepth = MPT3SAS_NVME_QUEUE_DEPTH;
+		ds = "NVMe";
+		sdev_printk(KERN_INFO, sdev,
+			"%s: handle(0x%04x), wwid(0x%016llx), port(%d)\n",
+			ds, handle, (unsigned long long)pcie_device->wwid,
+			pcie_device->port_num);
+		if (pcie_device->enclosure_handle != 0)
+			sdev_printk(KERN_INFO, sdev,
+			"%s: enclosure logical id(0x%016llx), slot(%d)\n",
+			ds,
+			(unsigned long long)pcie_device->enclosure_logical_id,
+			pcie_device->slot);
+		if (pcie_device->connector_name[0] != '\0')
+			sdev_printk(KERN_INFO, sdev,
+				"%s: enclosure level(0x%04x),"
+				"connector name( %s)\n", ds,
+				pcie_device->enclosure_level,
+				pcie_device->connector_name);
+
+		if (pcie_device->nvme_mdts)
+			blk_queue_max_hw_sectors(sdev->request_queue,
+					pcie_device->nvme_mdts/512);
+
+		pcie_device_put(pcie_device);
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		scsih_change_queue_depth(sdev, qdepth);
+		/* Enable QUEUE_FLAG_NOMERGES flag, so that IOs won't be
+		 ** merged and can eliminate holes created during merging
+		 ** operation.
+		 **/
+		blk_queue_flag_set(QUEUE_FLAG_NOMERGES,
+				sdev->request_queue);
+		blk_queue_virt_boundary(sdev->request_queue,
+				ioc->page_size - 1);
+		return 0;
+	}
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+	   sas_device_priv_data->sas_target->sas_address);
+	if (!sas_device) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
+		return 1;
+	}
+
+	sas_device->volume_handle = volume_handle;
+	sas_device->volume_wwid = volume_wwid;
+	if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
+		qdepth = MPT3SAS_SAS_QUEUE_DEPTH;
+		ssp_target = 1;
+		if (sas_device->device_info &
+				MPI2_SAS_DEVICE_INFO_SEP) {
+			sdev_printk(KERN_WARNING, sdev,
+			"set ignore_delay_remove for handle(0x%04x)\n",
+			sas_device_priv_data->sas_target->handle);
+			sas_device_priv_data->ignore_delay_remove = 1;
+			ds = "SES";
+		} else
+			ds = "SSP";
+	} else {
+		qdepth = MPT3SAS_SATA_QUEUE_DEPTH;
+		if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
+			ds = "STP";
+		else if (sas_device->device_info &
+		    MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+			ds = "SATA";
+	}
+
+	sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " \
+	    "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n",
+	    ds, handle, (unsigned long long)sas_device->sas_address,
+	    sas_device->phy, (unsigned long long)sas_device->device_name);
+
+	_scsih_display_enclosure_chassis_info(NULL, sas_device, sdev, NULL);
+
+	sas_device_put(sas_device);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (!ssp_target)
+		_scsih_display_sata_capabilities(ioc, handle, sdev);
+
+
+	scsih_change_queue_depth(sdev, qdepth);
+
+	if (ssp_target) {
+		sas_read_port_mode_page(sdev);
+		_scsih_enable_tlr(ioc, sdev);
+	}
+
+	return 0;
+}
+
+/**
+ * scsih_bios_param - fetch head, sector, cylinder info for a disk
+ * @sdev: scsi device struct
+ * @bdev: pointer to block device context
+ * @capacity: device size (in 512 byte sectors)
+ * @params: three element array to place output:
+ *              params[0] number of heads (max 255)
+ *              params[1] number of sectors (max 63)
+ *              params[2] number of cylinders
+ */
+static int
+scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+	sector_t capacity, int params[])
+{
+	int		heads;
+	int		sectors;
+	sector_t	cylinders;
+	ulong		dummy;
+
+	heads = 64;
+	sectors = 32;
+
+	dummy = heads * sectors;
+	cylinders = capacity;
+	sector_div(cylinders, dummy);
+
+	/*
+	 * Handle extended translation size for logical drives
+	 * > 1Gb
+	 */
+	if ((ulong)capacity >= 0x200000) {
+		heads = 255;
+		sectors = 63;
+		dummy = heads * sectors;
+		cylinders = capacity;
+		sector_div(cylinders, dummy);
+	}
+
+	/* return result */
+	params[0] = heads;
+	params[1] = sectors;
+	params[2] = cylinders;
+
+	return 0;
+}
+
+/**
+ * _scsih_response_code - translation of device response code
+ * @ioc: per adapter object
+ * @response_code: response code returned by the device
+ */
+static void
+_scsih_response_code(struct MPT3SAS_ADAPTER *ioc, u8 response_code)
+{
+	char *desc;
+
+	switch (response_code) {
+	case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE:
+		desc = "task management request completed";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME:
+		desc = "invalid frame";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
+		desc = "task management request not supported";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_FAILED:
+		desc = "task management request failed";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED:
+		desc = "task management request succeeded";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN:
+		desc = "invalid lun";
+		break;
+	case 0xA:
+		desc = "overlapped tag attempted";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
+		desc = "task queued, however not sent to target";
+		break;
+	default:
+		desc = "unknown";
+		break;
+	}
+	pr_warn(MPT3SAS_FMT "response_code(0x%01x): %s\n",
+		ioc->name, response_code, desc);
+}
+
+/**
+ * _scsih_tm_done - tm completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: none.
+ *
+ * The callback handler when using scsih_issue_tm.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_tm_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	if (ioc->tm_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->tm_cmds.smid != smid)
+		return 1;
+	ioc->tm_cmds.status |= MPT3_CMD_COMPLETE;
+	mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (mpi_reply) {
+		memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+		ioc->tm_cmds.status |= MPT3_CMD_REPLY_VALID;
+	}
+	ioc->tm_cmds.status &= ~MPT3_CMD_PENDING;
+	complete(&ioc->tm_cmds.done);
+	return 1;
+}
+
+/**
+ * mpt3sas_scsih_set_tm_flag - set per target tm_busy
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During taskmangement request, we need to freeze the device queue.
+ */
+void
+mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+	u8 skip = 0;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		if (skip)
+			continue;
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->sas_target->handle == handle) {
+			sas_device_priv_data->sas_target->tm_busy = 1;
+			skip = 1;
+			ioc->ignore_loginfos = 1;
+		}
+	}
+}
+
+/**
+ * mpt3sas_scsih_clear_tm_flag - clear per target tm_busy
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During taskmangement request, we need to freeze the device queue.
+ */
+void
+mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+	u8 skip = 0;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		if (skip)
+			continue;
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->sas_target->handle == handle) {
+			sas_device_priv_data->sas_target->tm_busy = 0;
+			skip = 1;
+			ioc->ignore_loginfos = 0;
+		}
+	}
+}
+
+/**
+ * mpt3sas_scsih_issue_tm - main routine for sending tm requests
+ * @ioc: per adapter struct
+ * @handle: device handle
+ * @lun: lun number
+ * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
+ * @smid_task: smid assigned to the task
+ * @msix_task: MSIX table index supplied by the OS
+ * @timeout: timeout in seconds
+ * @tr_method: Target Reset Method
+ * Context: user
+ *
+ * A generic API for sending task management requests to firmware.
+ *
+ * The callback index is set inside `ioc->tm_cb_idx`.
+ * The caller is responsible to check for outstanding commands.
+ *
+ * Return: SUCCESS or FAILED.
+ */
+int
+mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, u64 lun,
+	u8 type, u16 smid_task, u16 msix_task, u8 timeout, u8 tr_method)
+{
+	Mpi2SCSITaskManagementRequest_t *mpi_request;
+	Mpi2SCSITaskManagementReply_t *mpi_reply;
+	u16 smid = 0;
+	u32 ioc_state;
+	int rc;
+
+	lockdep_assert_held(&ioc->tm_cmds.mutex);
+
+	if (ioc->tm_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_info(MPT3SAS_FMT "%s: tm_cmd busy!!!\n",
+		    __func__, ioc->name);
+		return FAILED;
+	}
+
+	if (ioc->shost_recovery || ioc->remove_host ||
+	    ioc->pci_error_recovery) {
+		pr_info(MPT3SAS_FMT "%s: host reset in progress!\n",
+		    __func__, ioc->name);
+		return FAILED;
+	}
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+	if (ioc_state & MPI2_DOORBELL_USED) {
+		dhsprintk(ioc, pr_info(MPT3SAS_FMT
+			"unexpected doorbell active!\n", ioc->name));
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+		return (!rc) ? SUCCESS : FAILED;
+	}
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+		mpt3sas_base_fault_info(ioc, ioc_state &
+		    MPI2_DOORBELL_DATA_MASK);
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+		return (!rc) ? SUCCESS : FAILED;
+	}
+
+	smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		return FAILED;
+	}
+
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT
+		"sending tm: handle(0x%04x), task_type(0x%02x), smid(%d), timeout(%d), tr_method(0x%x)\n",
+		ioc->name, handle, type, smid_task, timeout, tr_method));
+	ioc->tm_cmds.status = MPT3_CMD_PENDING;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->tm_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+	memset(ioc->tm_cmds.reply, 0, sizeof(Mpi2SCSITaskManagementReply_t));
+	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->TaskType = type;
+	mpi_request->MsgFlags = tr_method;
+	mpi_request->TaskMID = cpu_to_le16(smid_task);
+	int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
+	mpt3sas_scsih_set_tm_flag(ioc, handle);
+	init_completion(&ioc->tm_cmds.done);
+	mpt3sas_base_put_smid_hi_priority(ioc, smid, msix_task);
+	wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
+	if (!(ioc->tm_cmds.status & MPT3_CMD_COMPLETE)) {
+		if (mpt3sas_base_check_cmd_timeout(ioc,
+			ioc->tm_cmds.status, mpi_request,
+			sizeof(Mpi2SCSITaskManagementRequest_t)/4)) {
+			rc = mpt3sas_base_hard_reset_handler(ioc,
+					FORCE_BIG_HAMMER);
+			rc = (!rc) ? SUCCESS : FAILED;
+			goto out;
+		}
+	}
+
+	/* sync IRQs in case those were busy during flush. */
+	mpt3sas_base_sync_reply_irqs(ioc);
+
+	if (ioc->tm_cmds.status & MPT3_CMD_REPLY_VALID) {
+		mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
+		mpi_reply = ioc->tm_cmds.reply;
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT "complete tm: " \
+		    "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
+		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+		    le32_to_cpu(mpi_reply->IOCLogInfo),
+		    le32_to_cpu(mpi_reply->TerminationCount)));
+		if (ioc->logging_level & MPT_DEBUG_TM) {
+			_scsih_response_code(ioc, mpi_reply->ResponseCode);
+			if (mpi_reply->IOCStatus)
+				_debug_dump_mf(mpi_request,
+				    sizeof(Mpi2SCSITaskManagementRequest_t)/4);
+		}
+	}
+	rc = SUCCESS;
+
+out:
+	mpt3sas_scsih_clear_tm_flag(ioc, handle);
+	ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
+	return rc;
+}
+
+int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+		u64 lun, u8 type, u16 smid_task, u16 msix_task,
+		u8 timeout, u8 tr_method)
+{
+	int ret;
+
+	mutex_lock(&ioc->tm_cmds.mutex);
+	ret = mpt3sas_scsih_issue_tm(ioc, handle, lun, type, smid_task,
+			msix_task, timeout, tr_method);
+	mutex_unlock(&ioc->tm_cmds.mutex);
+
+	return ret;
+}
+
+/**
+ * _scsih_tm_display_info - displays info about the device
+ * @ioc: per adapter struct
+ * @scmd: pointer to scsi command object
+ *
+ * Called by task management callback handlers.
+ */
+static void
+_scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
+{
+	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *priv_target = starget->hostdata;
+	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
+	unsigned long flags;
+	char *device_str = NULL;
+
+	if (!priv_target)
+		return;
+	if (ioc->hide_ir_msg)
+		device_str = "WarpDrive";
+	else
+		device_str = "volume";
+
+	scsi_print_command(scmd);
+	if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
+		starget_printk(KERN_INFO, starget,
+			"%s handle(0x%04x), %s wwid(0x%016llx)\n",
+			device_str, priv_target->handle,
+		    device_str, (unsigned long long)priv_target->sas_address);
+
+	} else if (priv_target->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_from_target(ioc, priv_target);
+		if (pcie_device) {
+			starget_printk(KERN_INFO, starget,
+				"handle(0x%04x), wwid(0x%016llx), port(%d)\n",
+				pcie_device->handle,
+				(unsigned long long)pcie_device->wwid,
+				pcie_device->port_num);
+			if (pcie_device->enclosure_handle != 0)
+				starget_printk(KERN_INFO, starget,
+					"enclosure logical id(0x%016llx), slot(%d)\n",
+					(unsigned long long)
+					pcie_device->enclosure_logical_id,
+					pcie_device->slot);
+			if (pcie_device->connector_name[0] != '\0')
+				starget_printk(KERN_INFO, starget,
+					"enclosure level(0x%04x), connector name( %s)\n",
+					pcie_device->enclosure_level,
+					pcie_device->connector_name);
+			pcie_device_put(pcie_device);
+		}
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	} else {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = __mpt3sas_get_sdev_from_target(ioc, priv_target);
+		if (sas_device) {
+			if (priv_target->flags &
+			    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+				starget_printk(KERN_INFO, starget,
+				    "volume handle(0x%04x), "
+				    "volume wwid(0x%016llx)\n",
+				    sas_device->volume_handle,
+				   (unsigned long long)sas_device->volume_wwid);
+			}
+			starget_printk(KERN_INFO, starget,
+			    "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n",
+			    sas_device->handle,
+			    (unsigned long long)sas_device->sas_address,
+			    sas_device->phy);
+
+			_scsih_display_enclosure_chassis_info(NULL, sas_device,
+			    NULL, starget);
+
+			sas_device_put(sas_device);
+		}
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+}
+
+/**
+ * scsih_abort - eh threads main abort routine
+ * @scmd: pointer to scsi command object
+ *
+ * Return: SUCCESS if command aborted else FAILED
+ */
+static int
+scsih_abort(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsiio_tracker *st = scsi_cmd_priv(scmd);
+	u16 handle;
+	int r;
+
+	u8 timeout = 30;
+	struct _pcie_device *pcie_device = NULL;
+	sdev_printk(KERN_INFO, scmd->device,
+		"attempting task abort! scmd(%p)\n", scmd);
+	_scsih_tm_display_info(ioc, scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	    ioc->remove_host) {
+		sdev_printk(KERN_INFO, scmd->device,
+			"device been deleted! scmd(%p)\n", scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* check for completed command */
+	if (st == NULL || st->cb_idx == 0xFF) {
+		scmd->result = DID_RESET << 16;
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components and volumes this is not supported */
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT ||
+	    sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	mpt3sas_halt_firmware(ioc);
+
+	handle = sas_device_priv_data->sas_target->handle;
+	pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
+	if (pcie_device && (!ioc->tm_custom_handling))
+		timeout = ioc->nvme_abort_timeout;
+	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->lun,
+		MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
+		st->smid, st->msix_io, timeout, 0);
+	/* Command must be cleared after abort */
+	if (r == SUCCESS && st->cb_idx != 0xFF)
+		r = FAILED;
+ out:
+	sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
+	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+	if (pcie_device)
+		pcie_device_put(pcie_device);
+	return r;
+}
+
+/**
+ * scsih_dev_reset - eh threads main device reset routine
+ * @scmd: pointer to scsi command object
+ *
+ * Return: SUCCESS if command aborted else FAILED
+ */
+static int
+scsih_dev_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
+	u16	handle;
+	u8	tr_method = 0;
+	u8	tr_timeout = 30;
+	int r;
+
+	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
+
+	sdev_printk(KERN_INFO, scmd->device,
+		"attempting device reset! scmd(%p)\n", scmd);
+	_scsih_tm_display_info(ioc, scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	    ioc->remove_host) {
+		sdev_printk(KERN_INFO, scmd->device,
+			"device been deleted! scmd(%p)\n", scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components obtain the volume_handle */
+	handle = 0;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		sas_device = mpt3sas_get_sdev_from_target(ioc,
+				target_priv_data);
+		if (sas_device)
+			handle = sas_device->volume_handle;
+	} else
+		handle = sas_device_priv_data->sas_target->handle;
+
+	if (!handle) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
+
+	if (pcie_device && (!ioc->tm_custom_handling)) {
+		tr_timeout = pcie_device->reset_timeout;
+		tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
+	} else
+		tr_method = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
+	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->lun,
+		MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 0,
+		tr_timeout, tr_method);
+	/* Check for busy commands after reset */
+	if (r == SUCCESS && atomic_read(&scmd->device->device_busy))
+		r = FAILED;
+ out:
+	sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
+	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+	if (sas_device)
+		sas_device_put(sas_device);
+	if (pcie_device)
+		pcie_device_put(pcie_device);
+
+	return r;
+}
+
+/**
+ * scsih_target_reset - eh threads main target reset routine
+ * @scmd: pointer to scsi command object
+ *
+ * Return: SUCCESS if command aborted else FAILED
+ */
+static int
+scsih_target_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
+	u16	handle;
+	u8	tr_method = 0;
+	u8	tr_timeout = 30;
+	int r;
+	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
+
+	starget_printk(KERN_INFO, starget, "attempting target reset! scmd(%p)\n",
+		scmd);
+	_scsih_tm_display_info(ioc, scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	    ioc->remove_host) {
+		starget_printk(KERN_INFO, starget, "target been deleted! scmd(%p)\n",
+			scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components obtain the volume_handle */
+	handle = 0;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		sas_device = mpt3sas_get_sdev_from_target(ioc,
+				target_priv_data);
+		if (sas_device)
+			handle = sas_device->volume_handle;
+	} else
+		handle = sas_device_priv_data->sas_target->handle;
+
+	if (!handle) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
+
+	if (pcie_device && (!ioc->tm_custom_handling)) {
+		tr_timeout = pcie_device->reset_timeout;
+		tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
+	} else
+		tr_method = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
+	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, 0,
+		MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 0,
+	    tr_timeout, tr_method);
+	/* Check for busy commands after reset */
+	if (r == SUCCESS && atomic_read(&starget->target_busy))
+		r = FAILED;
+ out:
+	starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
+	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+	if (sas_device)
+		sas_device_put(sas_device);
+	if (pcie_device)
+		pcie_device_put(pcie_device);
+	return r;
+}
+
+
+/**
+ * scsih_host_reset - eh threads main host reset routine
+ * @scmd: pointer to scsi command object
+ *
+ * Return: SUCCESS if command aborted else FAILED
+ */
+static int
+scsih_host_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	int r, retval;
+
+	pr_info(MPT3SAS_FMT "attempting host reset! scmd(%p)\n",
+	    ioc->name, scmd);
+	scsi_print_command(scmd);
+
+	if (ioc->is_driver_loading || ioc->remove_host) {
+		pr_info(MPT3SAS_FMT "Blocking the host reset\n",
+		    ioc->name);
+		r = FAILED;
+		goto out;
+	}
+
+	retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+	r = (retval < 0) ? FAILED : SUCCESS;
+out:
+	pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n",
+	    ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+	return r;
+}
+
+/**
+ * _scsih_fw_event_add - insert and queue up fw_event
+ * @ioc: per adapter object
+ * @fw_event: object describing the event
+ * Context: This function will acquire ioc->fw_event_lock.
+ *
+ * This adds the firmware event object into link list, then queues it up to
+ * be processed from user context.
+ */
+static void
+_scsih_fw_event_add(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+	unsigned long flags;
+
+	if (ioc->firmware_event_thread == NULL)
+		return;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	fw_event_work_get(fw_event);
+	INIT_LIST_HEAD(&fw_event->list);
+	list_add_tail(&fw_event->list, &ioc->fw_event_list);
+	INIT_WORK(&fw_event->work, _firmware_event_work);
+	fw_event_work_get(fw_event);
+	queue_work(ioc->firmware_event_thread, &fw_event->work);
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_fw_event_del_from_list - delete fw_event from the list
+ * @ioc: per adapter object
+ * @fw_event: object describing the event
+ * Context: This function will acquire ioc->fw_event_lock.
+ *
+ * If the fw_event is on the fw_event_list, remove it and do a put.
+ */
+static void
+_scsih_fw_event_del_from_list(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work
+	*fw_event)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	if (!list_empty(&fw_event->list)) {
+		list_del_init(&fw_event->list);
+		fw_event_work_put(fw_event);
+	}
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+
+ /**
+ * mpt3sas_send_trigger_data_event - send event for processing trigger data
+ * @ioc: per adapter object
+ * @event_data: trigger event data
+ */
+void
+mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
+{
+	struct fw_event_work *fw_event;
+	u16 sz;
+
+	if (ioc->is_driver_loading)
+		return;
+	sz = sizeof(*event_data);
+	fw_event = alloc_fw_event_work(sz);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT3SAS_PROCESS_TRIGGER_DIAG;
+	fw_event->ioc = ioc;
+	memcpy(fw_event->event_data, event_data, sizeof(*event_data));
+	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
+}
+
+/**
+ * _scsih_error_recovery_delete_devices - remove devices not responding
+ * @ioc: per adapter object
+ */
+static void
+_scsih_error_recovery_delete_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+
+	if (ioc->is_driver_loading)
+		return;
+	fw_event = alloc_fw_event_work(0);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT3SAS_REMOVE_UNRESPONDING_DEVICES;
+	fw_event->ioc = ioc;
+	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
+}
+
+/**
+ * mpt3sas_port_enable_complete - port enable completed (fake event)
+ * @ioc: per adapter object
+ */
+void
+mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+
+	fw_event = alloc_fw_event_work(0);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT3SAS_PORT_ENABLE_COMPLETE;
+	fw_event->ioc = ioc;
+	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
+}
+
+static struct fw_event_work *dequeue_next_fw_event(struct MPT3SAS_ADAPTER *ioc)
+{
+	unsigned long flags;
+	struct fw_event_work *fw_event = NULL;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	if (!list_empty(&ioc->fw_event_list)) {
+		fw_event = list_first_entry(&ioc->fw_event_list,
+				struct fw_event_work, list);
+		list_del_init(&fw_event->list);
+	}
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
+	return fw_event;
+}
+
+/**
+ * _scsih_fw_event_cleanup_queue - cleanup event queue
+ * @ioc: per adapter object
+ *
+ * Walk the firmware event queue, either killing timers, or waiting
+ * for outstanding events to complete
+ */
+static void
+_scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+
+	if (list_empty(&ioc->fw_event_list) ||
+	     !ioc->firmware_event_thread || in_interrupt())
+		return;
+
+	while ((fw_event = dequeue_next_fw_event(ioc))) {
+		/*
+		 * Wait on the fw_event to complete. If this returns 1, then
+		 * the event was never executed, and we need a put for the
+		 * reference the work had on the fw_event.
+		 *
+		 * If it did execute, we wait for it to finish, and the put will
+		 * happen from _firmware_event_work()
+		 */
+		if (cancel_work_sync(&fw_event->work))
+			fw_event_work_put(fw_event);
+
+		fw_event_work_put(fw_event);
+	}
+}
+
+/**
+ * _scsih_internal_device_block - block the sdev device
+ * @sdev: per device object
+ * @sas_device_priv_data : per device driver private data
+ *
+ * make sure device is blocked without error, if not
+ * print an error
+ */
+static void
+_scsih_internal_device_block(struct scsi_device *sdev,
+			struct MPT3SAS_DEVICE *sas_device_priv_data)
+{
+	int r = 0;
+
+	sdev_printk(KERN_INFO, sdev, "device_block, handle(0x%04x)\n",
+	    sas_device_priv_data->sas_target->handle);
+	sas_device_priv_data->block = 1;
+
+	r = scsi_internal_device_block_nowait(sdev);
+	if (r == -EINVAL)
+		sdev_printk(KERN_WARNING, sdev,
+		    "device_block failed with return(%d) for handle(0x%04x)\n",
+		    r, sas_device_priv_data->sas_target->handle);
+}
+
+/**
+ * _scsih_internal_device_unblock - unblock the sdev device
+ * @sdev: per device object
+ * @sas_device_priv_data : per device driver private data
+ * make sure device is unblocked without error, if not retry
+ * by blocking and then unblocking
+ */
+
+static void
+_scsih_internal_device_unblock(struct scsi_device *sdev,
+			struct MPT3SAS_DEVICE *sas_device_priv_data)
+{
+	int r = 0;
+
+	sdev_printk(KERN_WARNING, sdev, "device_unblock and setting to running, "
+	    "handle(0x%04x)\n", sas_device_priv_data->sas_target->handle);
+	sas_device_priv_data->block = 0;
+	r = scsi_internal_device_unblock_nowait(sdev, SDEV_RUNNING);
+	if (r == -EINVAL) {
+		/* The device has been set to SDEV_RUNNING by SD layer during
+		 * device addition but the request queue is still stopped by
+		 * our earlier block call. We need to perform a block again
+		 * to get the device to SDEV_BLOCK and then to SDEV_RUNNING */
+
+		sdev_printk(KERN_WARNING, sdev,
+		    "device_unblock failed with return(%d) for handle(0x%04x) "
+		    "performing a block followed by an unblock\n",
+		    r, sas_device_priv_data->sas_target->handle);
+		sas_device_priv_data->block = 1;
+		r = scsi_internal_device_block_nowait(sdev);
+		if (r)
+			sdev_printk(KERN_WARNING, sdev, "retried device_block "
+			    "failed with return(%d) for handle(0x%04x)\n",
+			    r, sas_device_priv_data->sas_target->handle);
+
+		sas_device_priv_data->block = 0;
+		r = scsi_internal_device_unblock_nowait(sdev, SDEV_RUNNING);
+		if (r)
+			sdev_printk(KERN_WARNING, sdev, "retried device_unblock"
+			    " failed with return(%d) for handle(0x%04x)\n",
+			    r, sas_device_priv_data->sas_target->handle);
+	}
+}
+
+/**
+ * _scsih_ublock_io_all_device - unblock every device
+ * @ioc: per adapter object
+ *
+ * change the device state from block to running
+ */
+static void
+_scsih_ublock_io_all_device(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (!sas_device_priv_data->block)
+			continue;
+
+		dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
+			"device_running, handle(0x%04x)\n",
+		    sas_device_priv_data->sas_target->handle));
+		_scsih_internal_device_unblock(sdev, sas_device_priv_data);
+	}
+}
+
+
+/**
+ * _scsih_ublock_io_device - prepare device to be deleted
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ *
+ * unblock then put device in offline state
+ */
+static void
+_scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
+			continue;
+		if (sas_device_priv_data->sas_target->sas_address
+		    != sas_address)
+			continue;
+		if (sas_device_priv_data->block)
+			_scsih_internal_device_unblock(sdev,
+				sas_device_priv_data);
+	}
+}
+
+/**
+ * _scsih_block_io_all_device - set the device state to SDEV_BLOCK
+ * @ioc: per adapter object
+ *
+ * During device pull we need to appropriately set the sdev state.
+ */
+static void
+_scsih_block_io_all_device(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->block)
+			continue;
+		if (sas_device_priv_data->ignore_delay_remove) {
+			sdev_printk(KERN_INFO, sdev,
+			"%s skip device_block for SES handle(0x%04x)\n",
+			__func__, sas_device_priv_data->sas_target->handle);
+			continue;
+		}
+		_scsih_internal_device_block(sdev, sas_device_priv_data);
+	}
+}
+
+/**
+ * _scsih_block_io_device - set the device state to SDEV_BLOCK
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During device pull we need to appropriately set the sdev state.
+ */
+static void
+_scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+	struct _sas_device *sas_device;
+
+	sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->sas_target->handle != handle)
+			continue;
+		if (sas_device_priv_data->block)
+			continue;
+		if (sas_device && sas_device->pend_sas_rphy_add)
+			continue;
+		if (sas_device_priv_data->ignore_delay_remove) {
+			sdev_printk(KERN_INFO, sdev,
+			"%s skip device_block for SES handle(0x%04x)\n",
+			__func__, sas_device_priv_data->sas_target->handle);
+			continue;
+		}
+		_scsih_internal_device_block(sdev, sas_device_priv_data);
+	}
+
+	if (sas_device)
+		sas_device_put(sas_device);
+}
+
+/**
+ * _scsih_block_io_to_children_attached_to_ex
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * attached to this expander. This function called when expander is
+ * pulled.
+ */
+static void
+_scsih_block_io_to_children_attached_to_ex(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander)
+{
+	struct _sas_port *mpt3sas_port;
+	struct _sas_device *sas_device;
+	struct _sas_node *expander_sibling;
+	unsigned long flags;
+
+	if (!sas_expander)
+		return;
+
+	list_for_each_entry(mpt3sas_port,
+	   &sas_expander->sas_port_list, port_list) {
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_END_DEVICE) {
+			spin_lock_irqsave(&ioc->sas_device_lock, flags);
+			sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+			    mpt3sas_port->remote_identify.sas_address);
+			if (sas_device) {
+				set_bit(sas_device->handle,
+						ioc->blocking_handles);
+				sas_device_put(sas_device);
+			}
+			spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		}
+	}
+
+	list_for_each_entry(mpt3sas_port,
+	   &sas_expander->sas_port_list, port_list) {
+
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_EDGE_EXPANDER_DEVICE ||
+		    mpt3sas_port->remote_identify.device_type ==
+		    SAS_FANOUT_EXPANDER_DEVICE) {
+			expander_sibling =
+			    mpt3sas_scsih_expander_find_by_sas_address(
+			    ioc, mpt3sas_port->remote_identify.sas_address);
+			_scsih_block_io_to_children_attached_to_ex(ioc,
+			    expander_sibling);
+		}
+	}
+}
+
+/**
+ * _scsih_block_io_to_children_attached_directly
+ * @ioc: per adapter object
+ * @event_data: topology change event data
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * direct attached during device pull.
+ */
+static void
+_scsih_block_io_to_children_attached_directly(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
+			_scsih_block_io_device(ioc, handle);
+	}
+}
+
+/**
+ * _scsih_block_io_to_pcie_children_attached_directly
+ * @ioc: per adapter object
+ * @event_data: topology change event data
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * direct attached during device pull/reconnect.
+ */
+static void
+_scsih_block_io_to_pcie_children_attached_directly(struct MPT3SAS_ADAPTER *ioc,
+		Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle =
+			le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		reason_code = event_data->PortEntry[i].PortStatus;
+		if (reason_code ==
+				MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING)
+			_scsih_block_io_device(ioc, handle);
+	}
+}
+/**
+ * _scsih_tm_tr_send - send task management request
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt time.
+ *
+ * This code is to initiate the device removal handshake protocol
+ * with controller firmware.  This function will issue target reset
+ * using high priority request queue.  It will send a sas iounit
+ * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
+ *
+ * This is designed to send muliple task management request at the same
+ * time to the fifo. If the fifo is full, we will append the request,
+ * and process it in a future completion.
+ */
+static void
+_scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2SCSITaskManagementRequest_t *mpi_request;
+	u16 smid;
+	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
+	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
+	u64 sas_address = 0;
+	unsigned long flags;
+	struct _tr_list *delayed_tr;
+	u32 ioc_state;
+	u8 tr_method = 0;
+
+	if (ioc->pci_error_recovery) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host in pci error recovery: handle(0x%04x)\n",
+			__func__, ioc->name,
+		    handle));
+		return;
+	}
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host is not operational: handle(0x%04x)\n",
+			__func__, ioc->name,
+		   handle));
+		return;
+	}
+
+	/* if PD, then return */
+	if (test_bit(handle, ioc->pd_handles))
+		return;
+
+	clear_bit(handle, ioc->pend_os_device_add);
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (sas_device && sas_device->starget &&
+	    sas_device->starget->hostdata) {
+		sas_target_priv_data = sas_device->starget->hostdata;
+		sas_target_priv_data->deleted = 1;
+		sas_address = sas_device->sas_address;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (!sas_device) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+		if (pcie_device && pcie_device->starget &&
+			pcie_device->starget->hostdata) {
+			sas_target_priv_data = pcie_device->starget->hostdata;
+			sas_target_priv_data->deleted = 1;
+			sas_address = pcie_device->wwid;
+		}
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		if (pcie_device && (!ioc->tm_custom_handling))
+			tr_method =
+			    MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
+		else
+			tr_method = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
+	}
+	if (sas_target_priv_data) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"setting delete flag: handle(0x%04x), sas_addr(0x%016llx)\n",
+			ioc->name, handle,
+		    (unsigned long long)sas_address));
+		if (sas_device) {
+			if (sas_device->enclosure_handle != 0)
+				dewtprintk(ioc, pr_info(MPT3SAS_FMT
+				    "setting delete flag:enclosure logical "
+				    "id(0x%016llx), slot(%d)\n", ioc->name,
+				    (unsigned long long)
+				    sas_device->enclosure_logical_id,
+				    sas_device->slot));
+			if (sas_device->connector_name[0] != '\0')
+				dewtprintk(ioc, pr_info(MPT3SAS_FMT
+				    "setting delete flag: enclosure "
+				    "level(0x%04x), connector name( %s)\n",
+				    ioc->name, sas_device->enclosure_level,
+				    sas_device->connector_name));
+		} else if (pcie_device) {
+			if (pcie_device->enclosure_handle != 0)
+				dewtprintk(ioc, pr_info(MPT3SAS_FMT
+				    "setting delete flag: logical "
+				    "id(0x%016llx), slot(%d)\n", ioc->name,
+				    (unsigned long long)
+				    pcie_device->enclosure_logical_id,
+				    pcie_device->slot));
+			if (pcie_device->connector_name[0] != '\0')
+				dewtprintk(ioc, pr_info(MPT3SAS_FMT
+				    "setting delete flag:, enclosure "
+				    "level(0x%04x), "
+				    "connector name( %s)\n", ioc->name,
+				    pcie_device->enclosure_level,
+				    pcie_device->connector_name));
+		}
+		_scsih_ublock_io_device(ioc, sas_address);
+		sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+	}
+
+	smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
+	if (!smid) {
+		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
+		if (!delayed_tr)
+			goto out;
+		INIT_LIST_HEAD(&delayed_tr->list);
+		delayed_tr->handle = handle;
+		list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "DELAYED:tr:handle(0x%04x), (open)\n",
+		    ioc->name, handle));
+		goto out;
+	}
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
+		ioc->name, handle, smid,
+	    ioc->tm_tr_cb_idx));
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+	mpi_request->MsgFlags = tr_method;
+	set_bit(handle, ioc->device_remove_in_progress);
+	mpt3sas_base_put_smid_hi_priority(ioc, smid, 0);
+	mpt3sas_trigger_master(ioc, MASTER_TRIGGER_DEVICE_REMOVAL);
+
+out:
+	if (sas_device)
+		sas_device_put(sas_device);
+	if (pcie_device)
+		pcie_device_put(pcie_device);
+}
+
+/**
+ * _scsih_tm_tr_complete -
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * This is the target reset completion routine.
+ * This code is part of the code to initiate the device removal
+ * handshake protocol with controller firmware.
+ * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	u16 handle;
+	Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
+	Mpi2SCSITaskManagementReply_t *mpi_reply =
+	    mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	Mpi2SasIoUnitControlRequest_t *mpi_request;
+	u16 smid_sas_ctrl;
+	u32 ioc_state;
+	struct _sc_list *delayed_sc;
+
+	if (ioc->pci_error_recovery) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host in pci error recovery\n", __func__,
+			ioc->name));
+		return 1;
+	}
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host is not operational\n", __func__, ioc->name));
+		return 1;
+	}
+	if (unlikely(!mpi_reply)) {
+		pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 1;
+	}
+	mpi_request_tm = mpt3sas_base_get_msg_frame(ioc, smid);
+	handle = le16_to_cpu(mpi_request_tm->DevHandle);
+	if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
+		dewtprintk(ioc, pr_err(MPT3SAS_FMT
+			"spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n",
+			ioc->name, handle,
+		    le16_to_cpu(mpi_reply->DevHandle), smid));
+		return 0;
+	}
+
+	mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+	    "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
+	    "loginfo(0x%08x), completed(%d)\n", ioc->name,
+	    handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
+	    le32_to_cpu(mpi_reply->IOCLogInfo),
+	    le32_to_cpu(mpi_reply->TerminationCount)));
+
+	smid_sas_ctrl = mpt3sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx);
+	if (!smid_sas_ctrl) {
+		delayed_sc = kzalloc(sizeof(*delayed_sc), GFP_ATOMIC);
+		if (!delayed_sc)
+			return _scsih_check_for_pending_tm(ioc, smid);
+		INIT_LIST_HEAD(&delayed_sc->list);
+		delayed_sc->handle = le16_to_cpu(mpi_request_tm->DevHandle);
+		list_add_tail(&delayed_sc->list, &ioc->delayed_sc_list);
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "DELAYED:sc:handle(0x%04x), (open)\n",
+		    ioc->name, handle));
+		return _scsih_check_for_pending_tm(ioc, smid);
+	}
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
+		ioc->name, handle, smid_sas_ctrl,
+	    ioc->tm_sas_control_cb_idx));
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid_sas_ctrl);
+	memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
+	mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
+	mpi_request->DevHandle = mpi_request_tm->DevHandle;
+	mpt3sas_base_put_smid_default(ioc, smid_sas_ctrl);
+
+	return _scsih_check_for_pending_tm(ioc, smid);
+}
+
+/** _scsih_allow_scmd_to_device - check whether scmd needs to
+ *				 issue to IOC or not.
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ *
+ * Returns true if scmd can be issued to IOC otherwise returns false.
+ */
+inline bool _scsih_allow_scmd_to_device(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd)
+{
+
+	if (ioc->pci_error_recovery)
+		return false;
+
+	if (ioc->hba_mpi_version_belonged == MPI2_VERSION) {
+		if (ioc->remove_host)
+			return false;
+
+		return true;
+	}
+
+	if (ioc->remove_host) {
+
+		switch (scmd->cmnd[0]) {
+		case SYNCHRONIZE_CACHE:
+		case START_STOP:
+			return true;
+		default:
+			return false;
+		}
+	}
+
+	return true;
+}
+
+/**
+ * _scsih_sas_control_complete - completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * This is the sas iounit control completion routine.
+ * This code is part of the code to initiate the device removal
+ * handshake protocol with controller firmware.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_sas_control_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u8 msix_index, u32 reply)
+{
+	Mpi2SasIoUnitControlReply_t *mpi_reply =
+	    mpt3sas_base_get_reply_virt_addr(ioc, reply);
+
+	if (likely(mpi_reply)) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"sc_complete:handle(0x%04x), (open) "
+		"smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
+		ioc->name, le16_to_cpu(mpi_reply->DevHandle), smid,
+		le16_to_cpu(mpi_reply->IOCStatus),
+		le32_to_cpu(mpi_reply->IOCLogInfo)));
+		if (le16_to_cpu(mpi_reply->IOCStatus) ==
+		     MPI2_IOCSTATUS_SUCCESS) {
+			clear_bit(le16_to_cpu(mpi_reply->DevHandle),
+			    ioc->device_remove_in_progress);
+		}
+	} else {
+		pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+	}
+	return mpt3sas_check_for_pending_internal_cmds(ioc, smid);
+}
+
+/**
+ * _scsih_tm_tr_volume_send - send target reset request for volumes
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt time.
+ *
+ * This is designed to send muliple task management request at the same
+ * time to the fifo. If the fifo is full, we will append the request,
+ * and process it in a future completion.
+ */
+static void
+_scsih_tm_tr_volume_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2SCSITaskManagementRequest_t *mpi_request;
+	u16 smid;
+	struct _tr_list *delayed_tr;
+
+	if (ioc->pci_error_recovery) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host reset in progress!\n",
+			__func__, ioc->name));
+		return;
+	}
+
+	smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_tr_volume_cb_idx);
+	if (!smid) {
+		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
+		if (!delayed_tr)
+			return;
+		INIT_LIST_HEAD(&delayed_tr->list);
+		delayed_tr->handle = handle;
+		list_add_tail(&delayed_tr->list, &ioc->delayed_tr_volume_list);
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "DELAYED:tr:handle(0x%04x), (open)\n",
+		    ioc->name, handle));
+		return;
+	}
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
+		ioc->name, handle, smid,
+	    ioc->tm_tr_volume_cb_idx));
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+	mpt3sas_base_put_smid_hi_priority(ioc, smid, 0);
+}
+
+/**
+ * _scsih_tm_volume_tr_complete - target reset completion
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_tm_volume_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u8 msix_index, u32 reply)
+{
+	u16 handle;
+	Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
+	Mpi2SCSITaskManagementReply_t *mpi_reply =
+	    mpt3sas_base_get_reply_virt_addr(ioc, reply);
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host reset in progress!\n",
+			__func__, ioc->name));
+		return 1;
+	}
+	if (unlikely(!mpi_reply)) {
+		pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 1;
+	}
+
+	mpi_request_tm = mpt3sas_base_get_msg_frame(ioc, smid);
+	handle = le16_to_cpu(mpi_request_tm->DevHandle);
+	if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
+		dewtprintk(ioc, pr_err(MPT3SAS_FMT
+			"spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n",
+			ioc->name, handle,
+		    le16_to_cpu(mpi_reply->DevHandle), smid));
+		return 0;
+	}
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+	    "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
+	    "loginfo(0x%08x), completed(%d)\n", ioc->name,
+	    handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
+	    le32_to_cpu(mpi_reply->IOCLogInfo),
+	    le32_to_cpu(mpi_reply->TerminationCount)));
+
+	return _scsih_check_for_pending_tm(ioc, smid);
+}
+
+/**
+ * _scsih_issue_delayed_event_ack - issue delayed Event ACK messages
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @event: Event ID
+ * @event_context: used to track events uniquely
+ *
+ * Context - processed in interrupt context.
+ */
+static void
+_scsih_issue_delayed_event_ack(struct MPT3SAS_ADAPTER *ioc, u16 smid, U16 event,
+				U32 event_context)
+{
+	Mpi2EventAckRequest_t *ack_request;
+	int i = smid - ioc->internal_smid;
+	unsigned long flags;
+
+	/* Without releasing the smid just update the
+	 * call back index and reuse the same smid for
+	 * processing this delayed request
+	 */
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	ioc->internal_lookup[i].cb_idx = ioc->base_cb_idx;
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"EVENT ACK: event(0x%04x), smid(%d), cb(%d)\n",
+		ioc->name, le16_to_cpu(event), smid,
+		ioc->base_cb_idx));
+	ack_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
+	ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
+	ack_request->Event = event;
+	ack_request->EventContext = event_context;
+	ack_request->VF_ID = 0;  /* TODO */
+	ack_request->VP_ID = 0;
+	mpt3sas_base_put_smid_default(ioc, smid);
+}
+
+/**
+ * _scsih_issue_delayed_sas_io_unit_ctrl - issue delayed
+ *				sas_io_unit_ctrl messages
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ *
+ * Context - processed in interrupt context.
+ */
+static void
+_scsih_issue_delayed_sas_io_unit_ctrl(struct MPT3SAS_ADAPTER *ioc,
+					u16 smid, u16 handle)
+{
+	Mpi2SasIoUnitControlRequest_t *mpi_request;
+	u32 ioc_state;
+	int i = smid - ioc->internal_smid;
+	unsigned long flags;
+
+	if (ioc->remove_host) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			    "%s: host has been removed\n",
+			     __func__, ioc->name));
+		return;
+	} else if (ioc->pci_error_recovery) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			    "%s: host in pci error recovery\n",
+			    __func__, ioc->name));
+		return;
+	}
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: host is not operational\n",
+		    __func__, ioc->name));
+		return;
+	}
+
+	/* Without releasing the smid just update the
+	 * call back index and reuse the same smid for
+	 * processing this delayed request
+	 */
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	ioc->internal_lookup[i].cb_idx = ioc->tm_sas_control_cb_idx;
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+	    "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
+	    ioc->name, handle, smid,
+	    ioc->tm_sas_control_cb_idx));
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
+	mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpt3sas_base_put_smid_default(ioc, smid);
+}
+
+/**
+ * _scsih_check_for_pending_internal_cmds - check for pending internal messages
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Context: Executed in interrupt context
+ *
+ * This will check delayed internal messages list, and process the
+ * next request.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	struct _sc_list *delayed_sc;
+	struct _event_ack_list *delayed_event_ack;
+
+	if (!list_empty(&ioc->delayed_event_ack_list)) {
+		delayed_event_ack = list_entry(ioc->delayed_event_ack_list.next,
+						struct _event_ack_list, list);
+		_scsih_issue_delayed_event_ack(ioc, smid,
+		  delayed_event_ack->Event, delayed_event_ack->EventContext);
+		list_del(&delayed_event_ack->list);
+		kfree(delayed_event_ack);
+		return 0;
+	}
+
+	if (!list_empty(&ioc->delayed_sc_list)) {
+		delayed_sc = list_entry(ioc->delayed_sc_list.next,
+						struct _sc_list, list);
+		_scsih_issue_delayed_sas_io_unit_ctrl(ioc, smid,
+						 delayed_sc->handle);
+		list_del(&delayed_sc->list);
+		kfree(delayed_sc);
+		return 0;
+	}
+	return 1;
+}
+
+/**
+ * _scsih_check_for_pending_tm - check for pending task management
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * This will check delayed target reset list, and feed the
+ * next reqeust.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	struct _tr_list *delayed_tr;
+
+	if (!list_empty(&ioc->delayed_tr_volume_list)) {
+		delayed_tr = list_entry(ioc->delayed_tr_volume_list.next,
+		    struct _tr_list, list);
+		mpt3sas_base_free_smid(ioc, smid);
+		_scsih_tm_tr_volume_send(ioc, delayed_tr->handle);
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+		return 0;
+	}
+
+	if (!list_empty(&ioc->delayed_tr_list)) {
+		delayed_tr = list_entry(ioc->delayed_tr_list.next,
+		    struct _tr_list, list);
+		mpt3sas_base_free_smid(ioc, smid);
+		_scsih_tm_tr_send(ioc, delayed_tr->handle);
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+		return 0;
+	}
+
+	return 1;
+}
+
+/**
+ * _scsih_check_topo_delete_events - sanity check on topo events
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ *
+ * This routine added to better handle cable breaker.
+ *
+ * This handles the case where driver receives multiple expander
+ * add and delete events in a single shot.  When there is a delete event
+ * the routine will void any pending add events waiting in the event queue.
+ */
+static void
+_scsih_check_topo_delete_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+	struct fw_event_work *fw_event;
+	Mpi2EventDataSasTopologyChangeList_t *local_event_data;
+	u16 expander_handle;
+	struct _sas_node *sas_expander;
+	unsigned long flags;
+	int i, reason_code;
+	u16 handle;
+
+	for (i = 0 ; i < event_data->NumEntries; i++) {
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)
+			_scsih_tm_tr_send(ioc, handle);
+	}
+
+	expander_handle = le16_to_cpu(event_data->ExpanderDevHandle);
+	if (expander_handle < ioc->sas_hba.num_phys) {
+		_scsih_block_io_to_children_attached_directly(ioc, event_data);
+		return;
+	}
+	if (event_data->ExpStatus ==
+	    MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING) {
+		/* put expander attached devices into blocking state */
+		spin_lock_irqsave(&ioc->sas_node_lock, flags);
+		sas_expander = mpt3sas_scsih_expander_find_by_handle(ioc,
+		    expander_handle);
+		_scsih_block_io_to_children_attached_to_ex(ioc, sas_expander);
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		do {
+			handle = find_first_bit(ioc->blocking_handles,
+			    ioc->facts.MaxDevHandle);
+			if (handle < ioc->facts.MaxDevHandle)
+				_scsih_block_io_device(ioc, handle);
+		} while (test_and_clear_bit(handle, ioc->blocking_handles));
+	} else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING)
+		_scsih_block_io_to_children_attached_directly(ioc, event_data);
+
+	if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
+		return;
+
+	/* mark ignore flag for pending events */
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
+		if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
+		    fw_event->ignore)
+			continue;
+		local_event_data = (Mpi2EventDataSasTopologyChangeList_t *)
+				   fw_event->event_data;
+		if (local_event_data->ExpStatus ==
+		    MPI2_EVENT_SAS_TOPO_ES_ADDED ||
+		    local_event_data->ExpStatus ==
+		    MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
+			if (le16_to_cpu(local_event_data->ExpanderDevHandle) ==
+			    expander_handle) {
+				dewtprintk(ioc, pr_info(MPT3SAS_FMT
+				    "setting ignoring flag\n", ioc->name));
+				fw_event->ignore = 1;
+			}
+		}
+	}
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_check_pcie_topo_remove_events - sanity check on topo
+ * events
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ *
+ * This handles the case where driver receives multiple switch
+ * or device add and delete events in a single shot.  When there
+ * is a delete event the routine will void any pending add
+ * events waiting in the event queue.
+ */
+static void
+_scsih_check_pcie_topo_remove_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+	struct fw_event_work *fw_event;
+	Mpi26EventDataPCIeTopologyChangeList_t *local_event_data;
+	unsigned long flags;
+	int i, reason_code;
+	u16 handle, switch_handle;
+
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle =
+			le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		reason_code = event_data->PortEntry[i].PortStatus;
+		if (reason_code == MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING)
+			_scsih_tm_tr_send(ioc, handle);
+	}
+
+	switch_handle = le16_to_cpu(event_data->SwitchDevHandle);
+	if (!switch_handle) {
+		_scsih_block_io_to_pcie_children_attached_directly(
+							ioc, event_data);
+		return;
+	}
+    /* TODO We are not supporting cascaded PCIe Switch removal yet*/
+	if ((event_data->SwitchStatus
+		== MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING) ||
+		(event_data->SwitchStatus ==
+					MPI26_EVENT_PCIE_TOPO_SS_RESPONDING))
+		_scsih_block_io_to_pcie_children_attached_directly(
+							ioc, event_data);
+
+	if (event_data->SwitchStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
+		return;
+
+	/* mark ignore flag for pending events */
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
+		if (fw_event->event != MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST ||
+			fw_event->ignore)
+			continue;
+		local_event_data =
+			(Mpi26EventDataPCIeTopologyChangeList_t *)
+			fw_event->event_data;
+		if (local_event_data->SwitchStatus ==
+		    MPI2_EVENT_SAS_TOPO_ES_ADDED ||
+		    local_event_data->SwitchStatus ==
+		    MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
+			if (le16_to_cpu(local_event_data->SwitchDevHandle) ==
+				switch_handle) {
+				dewtprintk(ioc, pr_info(MPT3SAS_FMT
+					"setting ignoring flag for switch event\n",
+					ioc->name));
+				fw_event->ignore = 1;
+			}
+		}
+	}
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_set_volume_delete_flag - setting volume delete flag
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * This returns nothing.
+ */
+static void
+_scsih_set_volume_delete_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _raid_device *raid_device;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+	if (raid_device && raid_device->starget &&
+	    raid_device->starget->hostdata) {
+		sas_target_priv_data =
+		    raid_device->starget->hostdata;
+		sas_target_priv_data->deleted = 1;
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "setting delete flag: handle(0x%04x), "
+		    "wwid(0x%016llx)\n", ioc->name, handle,
+		    (unsigned long long) raid_device->wwid));
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * _scsih_set_volume_handle_for_tr - set handle for target reset to volume
+ * @handle: input handle
+ * @a: handle for volume a
+ * @b: handle for volume b
+ *
+ * IR firmware only supports two raid volumes.  The purpose of this
+ * routine is to set the volume handle in either a or b. When the given
+ * input handle is non-zero, or when a and b have not been set before.
+ */
+static void
+_scsih_set_volume_handle_for_tr(u16 handle, u16 *a, u16 *b)
+{
+	if (!handle || handle == *a || handle == *b)
+		return;
+	if (!*a)
+		*a = handle;
+	else if (!*b)
+		*b = handle;
+}
+
+/**
+ * _scsih_check_ir_config_unhide_events - check for UNHIDE events
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ * Context: interrupt time.
+ *
+ * This routine will send target reset to volume, followed by target
+ * resets to the PDs. This is called when a PD has been removed, or
+ * volume has been deleted or removed. When the target reset is sent
+ * to volume, the PD target resets need to be queued to start upon
+ * completion of the volume target reset.
+ */
+static void
+_scsih_check_ir_config_unhide_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrConfigChangeList_t *event_data)
+{
+	Mpi2EventIrConfigElement_t *element;
+	int i;
+	u16 handle, volume_handle, a, b;
+	struct _tr_list *delayed_tr;
+
+	a = 0;
+	b = 0;
+
+	if (ioc->is_warpdrive)
+		return;
+
+	/* Volume Resets for Deleted or Removed */
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		if (le32_to_cpu(event_data->Flags) &
+		    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
+			continue;
+		if (element->ReasonCode ==
+		    MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED ||
+		    element->ReasonCode ==
+		    MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
+			volume_handle = le16_to_cpu(element->VolDevHandle);
+			_scsih_set_volume_delete_flag(ioc, volume_handle);
+			_scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
+		}
+	}
+
+	/* Volume Resets for UNHIDE events */
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		if (le32_to_cpu(event_data->Flags) &
+		    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
+			continue;
+		if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_UNHIDE) {
+			volume_handle = le16_to_cpu(element->VolDevHandle);
+			_scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
+		}
+	}
+
+	if (a)
+		_scsih_tm_tr_volume_send(ioc, a);
+	if (b)
+		_scsih_tm_tr_volume_send(ioc, b);
+
+	/* PD target resets */
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		if (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_UNHIDE)
+			continue;
+		handle = le16_to_cpu(element->PhysDiskDevHandle);
+		volume_handle = le16_to_cpu(element->VolDevHandle);
+		clear_bit(handle, ioc->pd_handles);
+		if (!volume_handle)
+			_scsih_tm_tr_send(ioc, handle);
+		else if (volume_handle == a || volume_handle == b) {
+			delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
+			BUG_ON(!delayed_tr);
+			INIT_LIST_HEAD(&delayed_tr->list);
+			delayed_tr->handle = handle;
+			list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			    "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name,
+			    handle));
+		} else
+			_scsih_tm_tr_send(ioc, handle);
+	}
+}
+
+
+/**
+ * _scsih_check_volume_delete_events - set delete flag for volumes
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ * Context: interrupt time.
+ *
+ * This will handle the case when the cable connected to entire volume is
+ * pulled. We will take care of setting the deleted flag so normal IO will
+ * not be sent.
+ */
+static void
+_scsih_check_volume_delete_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrVolume_t *event_data)
+{
+	u32 state;
+
+	if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
+		return;
+	state = le32_to_cpu(event_data->NewValue);
+	if (state == MPI2_RAID_VOL_STATE_MISSING || state ==
+	    MPI2_RAID_VOL_STATE_FAILED)
+		_scsih_set_volume_delete_flag(ioc,
+		    le16_to_cpu(event_data->VolDevHandle));
+}
+
+/**
+ * _scsih_temp_threshold_events - display temperature threshold exceeded events
+ * @ioc: per adapter object
+ * @event_data: the temp threshold event data
+ * Context: interrupt time.
+ */
+static void
+_scsih_temp_threshold_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataTemperature_t *event_data)
+{
+	if (ioc->temp_sensors_count >= event_data->SensorNum) {
+		pr_err(MPT3SAS_FMT "Temperature Threshold flags %s%s%s%s"
+		  " exceeded for Sensor: %d !!!\n", ioc->name,
+		  ((le16_to_cpu(event_data->Status) & 0x1) == 1) ? "0 " : " ",
+		  ((le16_to_cpu(event_data->Status) & 0x2) == 2) ? "1 " : " ",
+		  ((le16_to_cpu(event_data->Status) & 0x4) == 4) ? "2 " : " ",
+		  ((le16_to_cpu(event_data->Status) & 0x8) == 8) ? "3 " : " ",
+		  event_data->SensorNum);
+		pr_err(MPT3SAS_FMT "Current Temp In Celsius: %d\n",
+			ioc->name, event_data->CurrentTemperature);
+	}
+}
+
+static int _scsih_set_satl_pending(struct scsi_cmnd *scmd, bool pending)
+{
+	struct MPT3SAS_DEVICE *priv = scmd->device->hostdata;
+
+	if (scmd->cmnd[0] != ATA_12 && scmd->cmnd[0] != ATA_16)
+		return 0;
+
+	if (pending)
+		return test_and_set_bit(0, &priv->ata_command_pending);
+
+	clear_bit(0, &priv->ata_command_pending);
+	return 0;
+}
+
+/**
+ * _scsih_flush_running_cmds - completing outstanding commands.
+ * @ioc: per adapter object
+ *
+ * The flushing out of all pending scmd commands following host reset,
+ * where all IO is dropped to the floor.
+ */
+static void
+_scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct scsi_cmnd *scmd;
+	struct scsiio_tracker *st;
+	u16 smid;
+	int count = 0;
+
+	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
+		scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+		if (!scmd)
+			continue;
+		count++;
+		_scsih_set_satl_pending(scmd, false);
+		st = scsi_cmd_priv(scmd);
+		mpt3sas_base_clear_st(ioc, st);
+		scsi_dma_unmap(scmd);
+		if (ioc->pci_error_recovery || ioc->remove_host)
+			scmd->result = DID_NO_CONNECT << 16;
+		else
+			scmd->result = DID_RESET << 16;
+		scmd->scsi_done(scmd);
+	}
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT "completing %d cmds\n",
+	    ioc->name, count));
+}
+
+/**
+ * _scsih_setup_eedp - setup MPI request for EEDP transfer
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @mpi_request: pointer to the SCSI_IO request message frame
+ *
+ * Supporting protection 1 and 3.
+ */
+static void
+_scsih_setup_eedp(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	Mpi25SCSIIORequest_t *mpi_request)
+{
+	u16 eedp_flags;
+	unsigned char prot_op = scsi_get_prot_op(scmd);
+	unsigned char prot_type = scsi_get_prot_type(scmd);
+	Mpi25SCSIIORequest_t *mpi_request_3v =
+	   (Mpi25SCSIIORequest_t *)mpi_request;
+
+	if (prot_type == SCSI_PROT_DIF_TYPE0 || prot_op == SCSI_PROT_NORMAL)
+		return;
+
+	if (prot_op ==  SCSI_PROT_READ_STRIP)
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
+	else if (prot_op ==  SCSI_PROT_WRITE_INSERT)
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
+	else
+		return;
+
+	switch (prot_type) {
+	case SCSI_PROT_DIF_TYPE1:
+	case SCSI_PROT_DIF_TYPE2:
+
+		/*
+		* enable ref/guard checking
+		* auto increment ref tag
+		*/
+		eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+		mpi_request->CDB.EEDP32.PrimaryReferenceTag =
+		    cpu_to_be32(t10_pi_ref_tag(scmd->request));
+		break;
+
+	case SCSI_PROT_DIF_TYPE3:
+
+		/*
+		* enable guard checking
+		*/
+		eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+
+		break;
+	}
+
+	mpi_request_3v->EEDPBlockSize =
+	    cpu_to_le16(scmd->device->sector_size);
+
+	if (ioc->is_gen35_ioc)
+		eedp_flags |= MPI25_SCSIIO_EEDPFLAGS_APPTAG_DISABLE_MODE;
+	mpi_request->EEDPFlags = cpu_to_le16(eedp_flags);
+}
+
+/**
+ * _scsih_eedp_error_handling - return sense code for EEDP errors
+ * @scmd: pointer to scsi command object
+ * @ioc_status: ioc status
+ */
+static void
+_scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
+{
+	u8 ascq;
+
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		ascq = 0x01;
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		ascq = 0x02;
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		ascq = 0x03;
+		break;
+	default:
+		ascq = 0x00;
+		break;
+	}
+	scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST, 0x10,
+	    ascq);
+	scmd->result = DRIVER_SENSE << 24 | (DID_ABORT << 16) |
+	    SAM_STAT_CHECK_CONDITION;
+}
+
+/**
+ * scsih_qcmd - main scsi request entry point
+ * @shost: SCSI host pointer
+ * @scmd: pointer to scsi command object
+ *
+ * The callback index is set inside `ioc->scsi_io_cb_idx`.
+ *
+ * Return: 0 on success.  If there's a failure, return either:
+ * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
+ * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
+ */
+static int
+scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _raid_device *raid_device;
+	struct request *rq = scmd->request;
+	int class;
+	Mpi25SCSIIORequest_t *mpi_request;
+	struct _pcie_device *pcie_device = NULL;
+	u32 mpi_control;
+	u16 smid;
+	u16 handle;
+
+	if (ioc->logging_level & MPT_DEBUG_SCSI)
+		scsi_print_command(scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		return 0;
+	}
+
+	if (!(_scsih_allow_scmd_to_device(ioc, scmd))) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		return 0;
+	}
+
+	sas_target_priv_data = sas_device_priv_data->sas_target;
+
+	/* invalid device handle */
+	handle = sas_target_priv_data->handle;
+	if (handle == MPT3SAS_INVALID_DEVICE_HANDLE) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		return 0;
+	}
+
+
+	if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress) {
+		/* host recovery or link resets sent via IOCTLs */
+		return SCSI_MLQUEUE_HOST_BUSY;
+	} else if (sas_target_priv_data->deleted) {
+		/* device has been deleted */
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		return 0;
+	} else if (sas_target_priv_data->tm_busy ||
+		   sas_device_priv_data->block) {
+		/* device busy with task management */
+		return SCSI_MLQUEUE_DEVICE_BUSY;
+	}
+
+	/*
+	 * Bug work around for firmware SATL handling.  The loop
+	 * is based on atomic operations and ensures consistency
+	 * since we're lockless at this point
+	 */
+	do {
+		if (test_bit(0, &sas_device_priv_data->ata_command_pending)) {
+			scmd->result = SAM_STAT_BUSY;
+			scmd->scsi_done(scmd);
+			return 0;
+		}
+	} while (_scsih_set_satl_pending(scmd, true));
+
+	if (scmd->sc_data_direction == DMA_FROM_DEVICE)
+		mpi_control = MPI2_SCSIIO_CONTROL_READ;
+	else if (scmd->sc_data_direction == DMA_TO_DEVICE)
+		mpi_control = MPI2_SCSIIO_CONTROL_WRITE;
+	else
+		mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
+
+	/* set tags */
+	mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
+	/* NCQ Prio supported, make sure control indicated high priority */
+	if (sas_device_priv_data->ncq_prio_enable) {
+		class = IOPRIO_PRIO_CLASS(req_get_ioprio(rq));
+		if (class == IOPRIO_CLASS_RT)
+			mpi_control |= 1 << MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT;
+	}
+	/* Make sure Device is not raid volume.
+	 * We do not expose raid functionality to upper layer for warpdrive.
+	 */
+	if (((!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev))
+		&& !scsih_is_nvme(&scmd->device->sdev_gendev))
+		&& sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
+		mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
+
+	smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		_scsih_set_satl_pending(scmd, false);
+		goto out;
+	}
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, ioc->request_sz);
+	_scsih_setup_eedp(ioc, scmd, mpi_request);
+
+	if (scmd->cmd_len == 32)
+		mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
+	mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT)
+		mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
+	else
+		mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
+	mpi_request->Control = cpu_to_le32(mpi_control);
+	mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len);
+	mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR;
+	mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
+	mpi_request->SenseBufferLowAddress =
+	    mpt3sas_base_get_sense_buffer_dma(ioc, smid);
+	mpi_request->SGLOffset0 = offsetof(Mpi25SCSIIORequest_t, SGL) / 4;
+	int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
+	    mpi_request->LUN);
+	memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
+
+	if (mpi_request->DataLength) {
+		pcie_device = sas_target_priv_data->pcie_dev;
+		if (ioc->build_sg_scmd(ioc, scmd, smid, pcie_device)) {
+			mpt3sas_base_free_smid(ioc, smid);
+			_scsih_set_satl_pending(scmd, false);
+			goto out;
+		}
+	} else
+		ioc->build_zero_len_sge(ioc, &mpi_request->SGL);
+
+	raid_device = sas_target_priv_data->raid_device;
+	if (raid_device && raid_device->direct_io_enabled)
+		mpt3sas_setup_direct_io(ioc, scmd,
+			raid_device, mpi_request);
+
+	if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) {
+		if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) {
+			mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len |
+			    MPI25_SCSIIO_IOFLAGS_FAST_PATH);
+			mpt3sas_base_put_smid_fast_path(ioc, smid, handle);
+		} else
+			ioc->put_smid_scsi_io(ioc, smid,
+			    le16_to_cpu(mpi_request->DevHandle));
+	} else
+		mpt3sas_base_put_smid_default(ioc, smid);
+	return 0;
+
+ out:
+	return SCSI_MLQUEUE_HOST_BUSY;
+}
+
+/**
+ * _scsih_normalize_sense - normalize descriptor and fixed format sense data
+ * @sense_buffer: sense data returned by target
+ * @data: normalized skey/asc/ascq
+ */
+static void
+_scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
+{
+	if ((sense_buffer[0] & 0x7F) >= 0x72) {
+		/* descriptor format */
+		data->skey = sense_buffer[1] & 0x0F;
+		data->asc = sense_buffer[2];
+		data->ascq = sense_buffer[3];
+	} else {
+		/* fixed format */
+		data->skey = sense_buffer[2] & 0x0F;
+		data->asc = sense_buffer[12];
+		data->ascq = sense_buffer[13];
+	}
+}
+
+/**
+ * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @smid: ?
+ *
+ * scsi_status - SCSI Status code returned from target device
+ * scsi_state - state info associated with SCSI_IO determined by ioc
+ * ioc_status - ioc supplied status info
+ */
+static void
+_scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	Mpi2SCSIIOReply_t *mpi_reply, u16 smid)
+{
+	u32 response_info;
+	u8 *response_bytes;
+	u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	u8 scsi_state = mpi_reply->SCSIState;
+	u8 scsi_status = mpi_reply->SCSIStatus;
+	char *desc_ioc_state = NULL;
+	char *desc_scsi_status = NULL;
+	char *desc_scsi_state = ioc->tmp_string;
+	u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
+	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
+	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *priv_target = starget->hostdata;
+	char *device_str = NULL;
+
+	if (!priv_target)
+		return;
+	if (ioc->hide_ir_msg)
+		device_str = "WarpDrive";
+	else
+		device_str = "volume";
+
+	if (log_info == 0x31170000)
+		return;
+
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_SUCCESS:
+		desc_ioc_state = "success";
+		break;
+	case MPI2_IOCSTATUS_INVALID_FUNCTION:
+		desc_ioc_state = "invalid function";
+		break;
+	case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+		desc_ioc_state = "scsi recovered error";
+		break;
+	case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
+		desc_ioc_state = "scsi invalid dev handle";
+		break;
+	case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+		desc_ioc_state = "scsi device not there";
+		break;
+	case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+		desc_ioc_state = "scsi data overrun";
+		break;
+	case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+		desc_ioc_state = "scsi data underrun";
+		break;
+	case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+		desc_ioc_state = "scsi io data error";
+		break;
+	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+		desc_ioc_state = "scsi protocol error";
+		break;
+	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+		desc_ioc_state = "scsi task terminated";
+		break;
+	case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+		desc_ioc_state = "scsi residual mismatch";
+		break;
+	case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+		desc_ioc_state = "scsi task mgmt failed";
+		break;
+	case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+		desc_ioc_state = "scsi ioc terminated";
+		break;
+	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+		desc_ioc_state = "scsi ext terminated";
+		break;
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		desc_ioc_state = "eedp guard error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		desc_ioc_state = "eedp ref tag error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		desc_ioc_state = "eedp app tag error";
+		break;
+	case MPI2_IOCSTATUS_INSUFFICIENT_POWER:
+		desc_ioc_state = "insufficient power";
+		break;
+	default:
+		desc_ioc_state = "unknown";
+		break;
+	}
+
+	switch (scsi_status) {
+	case MPI2_SCSI_STATUS_GOOD:
+		desc_scsi_status = "good";
+		break;
+	case MPI2_SCSI_STATUS_CHECK_CONDITION:
+		desc_scsi_status = "check condition";
+		break;
+	case MPI2_SCSI_STATUS_CONDITION_MET:
+		desc_scsi_status = "condition met";
+		break;
+	case MPI2_SCSI_STATUS_BUSY:
+		desc_scsi_status = "busy";
+		break;
+	case MPI2_SCSI_STATUS_INTERMEDIATE:
+		desc_scsi_status = "intermediate";
+		break;
+	case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET:
+		desc_scsi_status = "intermediate condmet";
+		break;
+	case MPI2_SCSI_STATUS_RESERVATION_CONFLICT:
+		desc_scsi_status = "reservation conflict";
+		break;
+	case MPI2_SCSI_STATUS_COMMAND_TERMINATED:
+		desc_scsi_status = "command terminated";
+		break;
+	case MPI2_SCSI_STATUS_TASK_SET_FULL:
+		desc_scsi_status = "task set full";
+		break;
+	case MPI2_SCSI_STATUS_ACA_ACTIVE:
+		desc_scsi_status = "aca active";
+		break;
+	case MPI2_SCSI_STATUS_TASK_ABORTED:
+		desc_scsi_status = "task aborted";
+		break;
+	default:
+		desc_scsi_status = "unknown";
+		break;
+	}
+
+	desc_scsi_state[0] = '\0';
+	if (!scsi_state)
+		desc_scsi_state = " ";
+	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
+		strcat(desc_scsi_state, "response info ");
+	if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+		strcat(desc_scsi_state, "state terminated ");
+	if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS)
+		strcat(desc_scsi_state, "no status ");
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED)
+		strcat(desc_scsi_state, "autosense failed ");
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)
+		strcat(desc_scsi_state, "autosense valid ");
+
+	scsi_print_command(scmd);
+
+	if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
+		pr_warn(MPT3SAS_FMT "\t%s wwid(0x%016llx)\n", ioc->name,
+		    device_str, (unsigned long long)priv_target->sas_address);
+	} else if (priv_target->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+		pcie_device = mpt3sas_get_pdev_from_target(ioc, priv_target);
+		if (pcie_device) {
+			pr_info(MPT3SAS_FMT "\twwid(0x%016llx), port(%d)\n",
+			    ioc->name,
+			    (unsigned long long)pcie_device->wwid,
+			    pcie_device->port_num);
+			if (pcie_device->enclosure_handle != 0)
+				pr_info(MPT3SAS_FMT
+				    "\tenclosure logical id(0x%016llx), "
+				    "slot(%d)\n", ioc->name,
+				    (unsigned long long)
+				    pcie_device->enclosure_logical_id,
+				    pcie_device->slot);
+			if (pcie_device->connector_name[0])
+				pr_info(MPT3SAS_FMT
+				    "\tenclosure level(0x%04x),"
+				    "connector name( %s)\n",
+				    ioc->name, pcie_device->enclosure_level,
+				    pcie_device->connector_name);
+			pcie_device_put(pcie_device);
+		}
+	} else {
+		sas_device = mpt3sas_get_sdev_from_target(ioc, priv_target);
+		if (sas_device) {
+			pr_warn(MPT3SAS_FMT
+				"\tsas_address(0x%016llx), phy(%d)\n",
+				ioc->name, (unsigned long long)
+			    sas_device->sas_address, sas_device->phy);
+
+			_scsih_display_enclosure_chassis_info(ioc, sas_device,
+			    NULL, NULL);
+
+			sas_device_put(sas_device);
+		}
+	}
+
+	pr_warn(MPT3SAS_FMT
+		"\thandle(0x%04x), ioc_status(%s)(0x%04x), smid(%d)\n",
+		ioc->name, le16_to_cpu(mpi_reply->DevHandle),
+	    desc_ioc_state, ioc_status, smid);
+	pr_warn(MPT3SAS_FMT
+		"\trequest_len(%d), underflow(%d), resid(%d)\n",
+		ioc->name, scsi_bufflen(scmd), scmd->underflow,
+	    scsi_get_resid(scmd));
+	pr_warn(MPT3SAS_FMT
+		"\ttag(%d), transfer_count(%d), sc->result(0x%08x)\n",
+		ioc->name, le16_to_cpu(mpi_reply->TaskTag),
+	    le32_to_cpu(mpi_reply->TransferCount), scmd->result);
+	pr_warn(MPT3SAS_FMT
+		"\tscsi_status(%s)(0x%02x), scsi_state(%s)(0x%02x)\n",
+		ioc->name, desc_scsi_status,
+	    scsi_status, desc_scsi_state, scsi_state);
+
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
+		struct sense_info data;
+		_scsih_normalize_sense(scmd->sense_buffer, &data);
+		pr_warn(MPT3SAS_FMT
+		  "\t[sense_key,asc,ascq]: [0x%02x,0x%02x,0x%02x], count(%d)\n",
+		  ioc->name, data.skey,
+		  data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount));
+	}
+	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
+		response_info = le32_to_cpu(mpi_reply->ResponseInfo);
+		response_bytes = (u8 *)&response_info;
+		_scsih_response_code(ioc, response_bytes[0]);
+	}
+}
+
+/**
+ * _scsih_turn_on_pfa_led - illuminate PFA LED
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: process
+ */
+static void
+_scsih_turn_on_pfa_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2SepReply_t mpi_reply;
+	Mpi2SepRequest_t mpi_request;
+	struct _sas_device *sas_device;
+
+	sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (!sas_device)
+		return;
+
+	memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
+	mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
+	mpi_request.SlotStatus =
+	    cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
+	mpi_request.DevHandle = cpu_to_le16(handle);
+	mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS;
+	if ((mpt3sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
+	    &mpi_request)) != 0) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
+		__FILE__, __LINE__, __func__);
+		goto out;
+	}
+	sas_device->pfa_led_on = 1;
+
+	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
+			ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
+		    le32_to_cpu(mpi_reply.IOCLogInfo)));
+		goto out;
+	}
+out:
+	sas_device_put(sas_device);
+}
+
+/**
+ * _scsih_turn_off_pfa_led - turn off Fault LED
+ * @ioc: per adapter object
+ * @sas_device: sas device whose PFA LED has to turned off
+ * Context: process
+ */
+static void
+_scsih_turn_off_pfa_led(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	Mpi2SepReply_t mpi_reply;
+	Mpi2SepRequest_t mpi_request;
+
+	memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
+	mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
+	mpi_request.SlotStatus = 0;
+	mpi_request.Slot = cpu_to_le16(sas_device->slot);
+	mpi_request.DevHandle = 0;
+	mpi_request.EnclosureHandle = cpu_to_le16(sas_device->enclosure_handle);
+	mpi_request.Flags = MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS;
+	if ((mpt3sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
+		&mpi_request)) != 0) {
+		printk(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
+		__FILE__, __LINE__, __func__);
+		return;
+	}
+
+	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
+		dewtprintk(ioc, printk(MPT3SAS_FMT
+		 "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
+		 ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
+		 le32_to_cpu(mpi_reply.IOCLogInfo)));
+		return;
+	}
+}
+
+/**
+ * _scsih_send_event_to_turn_on_pfa_led - fire delayed event
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt.
+ */
+static void
+_scsih_send_event_to_turn_on_pfa_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct fw_event_work *fw_event;
+
+	fw_event = alloc_fw_event_work(0);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT3SAS_TURN_ON_PFA_LED;
+	fw_event->device_handle = handle;
+	fw_event->ioc = ioc;
+	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
+}
+
+/**
+ * _scsih_smart_predicted_fault - process smart errors
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt.
+ */
+static void
+_scsih_smart_predicted_fault(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct scsi_target *starget;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	Mpi2EventNotificationReply_t *event_reply;
+	Mpi2EventDataSasDeviceStatusChange_t *event_data;
+	struct _sas_device *sas_device;
+	ssize_t sz;
+	unsigned long flags;
+
+	/* only handle non-raid devices */
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (!sas_device)
+		goto out_unlock;
+
+	starget = sas_device->starget;
+	sas_target_priv_data = starget->hostdata;
+
+	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) ||
+	   ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)))
+		goto out_unlock;
+
+	_scsih_display_enclosure_chassis_info(NULL, sas_device, NULL, starget);
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM)
+		_scsih_send_event_to_turn_on_pfa_led(ioc, handle);
+
+	/* insert into event log */
+	sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
+	     sizeof(Mpi2EventDataSasDeviceStatusChange_t);
+	event_reply = kzalloc(sz, GFP_KERNEL);
+	if (!event_reply) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
+	event_reply->Event =
+	    cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
+	event_reply->MsgLength = sz/4;
+	event_reply->EventDataLength =
+	    cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4);
+	event_data = (Mpi2EventDataSasDeviceStatusChange_t *)
+	    event_reply->EventData;
+	event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA;
+	event_data->ASC = 0x5D;
+	event_data->DevHandle = cpu_to_le16(handle);
+	event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address);
+	mpt3sas_ctl_add_to_event_log(ioc, event_reply);
+	kfree(event_reply);
+out:
+	if (sas_device)
+		sas_device_put(sas_device);
+	return;
+
+out_unlock:
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	goto out;
+}
+
+/**
+ * _scsih_io_done - scsi request callback
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Callback handler when using _scsih_qcmd.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
+{
+	Mpi25SCSIIORequest_t *mpi_request;
+	Mpi2SCSIIOReply_t *mpi_reply;
+	struct scsi_cmnd *scmd;
+	struct scsiio_tracker *st;
+	u16 ioc_status;
+	u32 xfer_cnt;
+	u8 scsi_state;
+	u8 scsi_status;
+	u32 log_info;
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	u32 response_code = 0;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+
+	scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+	if (scmd == NULL)
+		return 1;
+
+	_scsih_set_satl_pending(scmd, false);
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+	if (mpi_reply == NULL) {
+		scmd->result = DID_OK << 16;
+		goto out;
+	}
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	     sas_device_priv_data->sas_target->deleted) {
+		scmd->result = DID_NO_CONNECT << 16;
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+
+	/*
+	 * WARPDRIVE: If direct_io is set then it is directIO,
+	 * the failed direct I/O should be redirected to volume
+	 */
+	st = scsi_cmd_priv(scmd);
+	if (st->direct_io &&
+	     ((ioc_status & MPI2_IOCSTATUS_MASK)
+	      != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) {
+		st->direct_io = 0;
+		memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
+		mpi_request->DevHandle =
+		    cpu_to_le16(sas_device_priv_data->sas_target->handle);
+		ioc->put_smid_scsi_io(ioc, smid,
+		    sas_device_priv_data->sas_target->handle);
+		return 0;
+	}
+	/* turning off TLR */
+	scsi_state = mpi_reply->SCSIState;
+	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
+		response_code =
+		    le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
+	if (!sas_device_priv_data->tlr_snoop_check) {
+		sas_device_priv_data->tlr_snoop_check++;
+		if ((!ioc->is_warpdrive &&
+		    !scsih_is_raid(&scmd->device->sdev_gendev) &&
+		    !scsih_is_nvme(&scmd->device->sdev_gendev))
+		    && sas_is_tlr_enabled(scmd->device) &&
+		    response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
+			sas_disable_tlr(scmd->device);
+			sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
+		}
+	}
+
+	xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
+	scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
+	if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
+		log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);
+	else
+		log_info = 0;
+	ioc_status &= MPI2_IOCSTATUS_MASK;
+	scsi_status = mpi_reply->SCSIStatus;
+
+	if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
+	    (scsi_status == MPI2_SCSI_STATUS_BUSY ||
+	     scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT ||
+	     scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) {
+		ioc_status = MPI2_IOCSTATUS_SUCCESS;
+	}
+
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
+		struct sense_info data;
+		const void *sense_data = mpt3sas_base_get_sense_buffer(ioc,
+		    smid);
+		u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
+		    le32_to_cpu(mpi_reply->SenseCount));
+		memcpy(scmd->sense_buffer, sense_data, sz);
+		_scsih_normalize_sense(scmd->sense_buffer, &data);
+		/* failure prediction threshold exceeded */
+		if (data.asc == 0x5D)
+			_scsih_smart_predicted_fault(ioc,
+			    le16_to_cpu(mpi_reply->DevHandle));
+		mpt3sas_trigger_scsi(ioc, data.skey, data.asc, data.ascq);
+
+		if ((ioc->logging_level & MPT_DEBUG_REPLY) &&
+		     ((scmd->sense_buffer[2] == UNIT_ATTENTION) ||
+		     (scmd->sense_buffer[2] == MEDIUM_ERROR) ||
+		     (scmd->sense_buffer[2] == HARDWARE_ERROR)))
+			_scsih_scsi_ioc_info(ioc, scmd, mpi_reply, smid);
+	}
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_BUSY:
+	case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
+		scmd->result = SAM_STAT_BUSY;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+		scmd->result = DID_NO_CONNECT << 16;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+		if (sas_device_priv_data->block) {
+			scmd->result = DID_TRANSPORT_DISRUPTED << 16;
+			goto out;
+		}
+		if (log_info == 0x31110630) {
+			if (scmd->retries > 2) {
+				scmd->result = DID_NO_CONNECT << 16;
+				scsi_device_set_state(scmd->device,
+				    SDEV_OFFLINE);
+			} else {
+				scmd->result = DID_SOFT_ERROR << 16;
+				scmd->device->expecting_cc_ua = 1;
+			}
+			break;
+		} else if (log_info == VIRTUAL_IO_FAILED_RETRY) {
+			scmd->result = DID_RESET << 16;
+			break;
+		} else if ((scmd->device->channel == RAID_CHANNEL) &&
+		   (scsi_state == (MPI2_SCSI_STATE_TERMINATED |
+		   MPI2_SCSI_STATE_NO_SCSI_STATUS))) {
+			scmd->result = DID_RESET << 16;
+			break;
+		}
+		scmd->result = DID_SOFT_ERROR << 16;
+		break;
+	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+		scmd->result = DID_RESET << 16;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+		if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else
+			scmd->result = (DID_OK << 16) | scsi_status;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+		scmd->result = (DID_OK << 16) | scsi_status;
+
+		if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID))
+			break;
+
+		if (xfer_cnt < scmd->underflow) {
+			if (scsi_status == SAM_STAT_BUSY)
+				scmd->result = SAM_STAT_BUSY;
+			else
+				scmd->result = DID_SOFT_ERROR << 16;
+		} else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
+		     MPI2_SCSI_STATE_NO_SCSI_STATUS))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+			scmd->result = DID_RESET << 16;
+		else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) {
+			mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID;
+			mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION;
+			scmd->result = (DRIVER_SENSE << 24) |
+			    SAM_STAT_CHECK_CONDITION;
+			scmd->sense_buffer[0] = 0x70;
+			scmd->sense_buffer[2] = ILLEGAL_REQUEST;
+			scmd->sense_buffer[12] = 0x20;
+			scmd->sense_buffer[13] = 0;
+		}
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+		scsi_set_resid(scmd, 0);
+		/* fall through */
+	case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+	case MPI2_IOCSTATUS_SUCCESS:
+		scmd->result = (DID_OK << 16) | scsi_status;
+		if (response_code ==
+		    MPI2_SCSITASKMGMT_RSP_INVALID_FRAME ||
+		    (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
+		     MPI2_SCSI_STATE_NO_SCSI_STATUS)))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+			scmd->result = DID_RESET << 16;
+		break;
+
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		_scsih_eedp_error_handling(scmd, ioc_status);
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+	case MPI2_IOCSTATUS_INVALID_FUNCTION:
+	case MPI2_IOCSTATUS_INVALID_SGL:
+	case MPI2_IOCSTATUS_INTERNAL_ERROR:
+	case MPI2_IOCSTATUS_INVALID_FIELD:
+	case MPI2_IOCSTATUS_INVALID_STATE:
+	case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+	case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+	case MPI2_IOCSTATUS_INSUFFICIENT_POWER:
+	default:
+		scmd->result = DID_SOFT_ERROR << 16;
+		break;
+
+	}
+
+	if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
+		_scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
+
+ out:
+
+	scsi_dma_unmap(scmd);
+	mpt3sas_base_free_smid(ioc, smid);
+	scmd->scsi_done(scmd);
+	return 0;
+}
+
+/**
+ * _scsih_sas_host_refresh - refreshing sas host object contents
+ * @ioc: per adapter object
+ * Context: user
+ *
+ * During port enable, fw will send topology events for every device. Its
+ * possible that the handles may change from the previous setting, so this
+ * code keeping handles updating if changed.
+ */
+static void
+_scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
+{
+	u16 sz;
+	u16 ioc_status;
+	int i;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+	u16 attached_handle;
+	u8 link_rate;
+
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT
+	    "updating handles for sas_host(0x%016llx)\n",
+	    ioc->name, (unsigned long long)ioc->sas_hba.sas_address));
+
+	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
+	    * sizeof(Mpi2SasIOUnit0PhyData_t));
+	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg0) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+	    sas_iounit_pg0, sz)) != 0)
+		goto out;
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		goto out;
+	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+		link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4;
+		if (i == 0)
+			ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
+			    PhyData[0].ControllerDevHandle);
+		ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
+		attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
+		    AttachedDevHandle);
+		if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
+			link_rate = MPI2_SAS_NEG_LINK_RATE_1_5;
+		mpt3sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
+		    attached_handle, i, link_rate);
+	}
+ out:
+	kfree(sas_iounit_pg0);
+}
+
+/**
+ * _scsih_sas_host_add - create sas host object
+ * @ioc: per adapter object
+ *
+ * Creating host side data object, stored in ioc->sas_hba
+ */
+static void
+_scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
+{
+	int i;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+	Mpi2SasPhyPage0_t phy_pg0;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2SasEnclosurePage0_t enclosure_pg0;
+	u16 ioc_status;
+	u16 sz;
+	u8 device_missing_delay;
+	u8 num_phys;
+
+	mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
+	if (!num_phys) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+	ioc->sas_hba.phy = kcalloc(num_phys,
+	    sizeof(struct _sas_phy), GFP_KERNEL);
+	if (!ioc->sas_hba.phy) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc->sas_hba.num_phys = num_phys;
+
+	/* sas_iounit page 0 */
+	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit0PhyData_t));
+	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg0) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+	    sas_iounit_pg0, sz))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	/* sas_iounit page 1 */
+	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit1PhyData_t));
+	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg1) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+	    sas_iounit_pg1, sz))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	ioc->io_missing_delay =
+	    sas_iounit_pg1->IODeviceMissingDelay;
+	device_missing_delay =
+	    sas_iounit_pg1->ReportDeviceMissingDelay;
+	if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+		ioc->device_missing_delay = (device_missing_delay &
+		    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+	else
+		ioc->device_missing_delay = device_missing_delay &
+		    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+
+	ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev;
+	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+		if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
+		    i))) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			goto out;
+		}
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			goto out;
+		}
+
+		if (i == 0)
+			ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
+			    PhyData[0].ControllerDevHandle);
+		ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
+		ioc->sas_hba.phy[i].phy_id = i;
+		mpt3sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i],
+		    phy_pg0, ioc->sas_hba.parent_dev);
+	}
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc->sas_hba.enclosure_handle =
+	    le16_to_cpu(sas_device_pg0.EnclosureHandle);
+	ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+	pr_info(MPT3SAS_FMT
+		"host_add: handle(0x%04x), sas_addr(0x%016llx), phys(%d)\n",
+		ioc->name, ioc->sas_hba.handle,
+	    (unsigned long long) ioc->sas_hba.sas_address,
+	    ioc->sas_hba.num_phys) ;
+
+	if (ioc->sas_hba.enclosure_handle) {
+		if (!(mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+		    &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+		   ioc->sas_hba.enclosure_handle)))
+			ioc->sas_hba.enclosure_logical_id =
+			    le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+	}
+
+ out:
+	kfree(sas_iounit_pg1);
+	kfree(sas_iounit_pg0);
+}
+
+/**
+ * _scsih_expander_add -  creating expander object
+ * @ioc: per adapter object
+ * @handle: expander handle
+ *
+ * Creating expander object, stored in ioc->sas_expander_list.
+ *
+ * Return: 0 for success, else error.
+ */
+static int
+_scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_node *sas_expander;
+	struct _enclosure_node *enclosure_dev;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2ExpanderPage0_t expander_pg0;
+	Mpi2ExpanderPage1_t expander_pg1;
+	u32 ioc_status;
+	u16 parent_handle;
+	u64 sas_address, sas_address_parent = 0;
+	int i;
+	unsigned long flags;
+	struct _sas_port *mpt3sas_port = NULL;
+
+	int rc = 0;
+
+	if (!handle)
+		return -1;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery)
+		return -1;
+
+	if ((mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+	    MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	/* handle out of order topology events */
+	parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle);
+	if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent)
+	    != 0) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+	if (sas_address_parent != ioc->sas_hba.sas_address) {
+		spin_lock_irqsave(&ioc->sas_node_lock, flags);
+		sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
+		    sas_address_parent);
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		if (!sas_expander) {
+			rc = _scsih_expander_add(ioc, parent_handle);
+			if (rc != 0)
+				return rc;
+		}
+	}
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_address = le64_to_cpu(expander_pg0.SASAddress);
+	sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
+	    sas_address);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	if (sas_expander)
+		return 0;
+
+	sas_expander = kzalloc(sizeof(struct _sas_node),
+	    GFP_KERNEL);
+	if (!sas_expander) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	sas_expander->handle = handle;
+	sas_expander->num_phys = expander_pg0.NumPhys;
+	sas_expander->sas_address_parent = sas_address_parent;
+	sas_expander->sas_address = sas_address;
+
+	pr_info(MPT3SAS_FMT "expander_add: handle(0x%04x)," \
+	    " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name,
+	    handle, parent_handle, (unsigned long long)
+	    sas_expander->sas_address, sas_expander->num_phys);
+
+	if (!sas_expander->num_phys) {
+		rc = -1;
+		goto out_fail;
+	}
+	sas_expander->phy = kcalloc(sas_expander->num_phys,
+	    sizeof(struct _sas_phy), GFP_KERNEL);
+	if (!sas_expander->phy) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -1;
+		goto out_fail;
+	}
+
+	INIT_LIST_HEAD(&sas_expander->sas_port_list);
+	mpt3sas_port = mpt3sas_transport_port_add(ioc, handle,
+	    sas_address_parent);
+	if (!mpt3sas_port) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -1;
+		goto out_fail;
+	}
+	sas_expander->parent_dev = &mpt3sas_port->rphy->dev;
+
+	for (i = 0 ; i < sas_expander->num_phys ; i++) {
+		if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply,
+		    &expander_pg1, i, handle))) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			rc = -1;
+			goto out_fail;
+		}
+		sas_expander->phy[i].handle = handle;
+		sas_expander->phy[i].phy_id = i;
+
+		if ((mpt3sas_transport_add_expander_phy(ioc,
+		    &sas_expander->phy[i], expander_pg1,
+		    sas_expander->parent_dev))) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			rc = -1;
+			goto out_fail;
+		}
+	}
+
+	if (sas_expander->enclosure_handle) {
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+						sas_expander->enclosure_handle);
+		if (enclosure_dev)
+			sas_expander->enclosure_logical_id =
+			    le64_to_cpu(enclosure_dev->pg0.EnclosureLogicalID);
+	}
+
+	_scsih_expander_node_add(ioc, sas_expander);
+	return 0;
+
+ out_fail:
+
+	if (mpt3sas_port)
+		mpt3sas_transport_port_remove(ioc, sas_expander->sas_address,
+		    sas_address_parent);
+	kfree(sas_expander);
+	return rc;
+}
+
+/**
+ * mpt3sas_expander_remove - removing expander object
+ * @ioc: per adapter object
+ * @sas_address: expander sas_address
+ */
+void
+mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
+{
+	struct _sas_node *sas_expander;
+	unsigned long flags;
+
+	if (ioc->shost_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
+	    sas_address);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+	if (sas_expander)
+		_scsih_expander_node_remove(ioc, sas_expander);
+}
+
+/**
+ * _scsih_done -  internal SCSI_IO callback handler.
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Callback handler when sending internal generated SCSI_IO.
+ * The callback index passed is `ioc->scsih_cb_idx`
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (ioc->scsih_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->scsih_cmds.smid != smid)
+		return 1;
+	ioc->scsih_cmds.status |= MPT3_CMD_COMPLETE;
+	if (mpi_reply) {
+		memcpy(ioc->scsih_cmds.reply, mpi_reply,
+		    mpi_reply->MsgLength*4);
+		ioc->scsih_cmds.status |= MPT3_CMD_REPLY_VALID;
+	}
+	ioc->scsih_cmds.status &= ~MPT3_CMD_PENDING;
+	complete(&ioc->scsih_cmds.done);
+	return 1;
+}
+
+
+
+
+#define MPT3_MAX_LUNS (255)
+
+
+/**
+ * _scsih_check_access_status - check access flags
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * @handle: sas device handle
+ * @access_status: errors returned during discovery of the device
+ *
+ * Return: 0 for success, else failure
+ */
+static u8
+_scsih_check_access_status(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	u16 handle, u8 access_status)
+{
+	u8 rc = 1;
+	char *desc = NULL;
+
+	switch (access_status) {
+	case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS:
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION:
+		rc = 0;
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED:
+		desc = "sata capability failed";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT:
+		desc = "sata affiliation conflict";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE:
+		desc = "route not addressable";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE:
+		desc = "smp error not addressable";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED:
+		desc = "device blocked";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX:
+		desc = "sata initialization failed";
+		break;
+	default:
+		desc = "unknown";
+		break;
+	}
+
+	if (!rc)
+		return 0;
+
+	pr_err(MPT3SAS_FMT
+		"discovery errors(%s): sas_address(0x%016llx), handle(0x%04x)\n",
+		ioc->name, desc, (unsigned long long)sas_address, handle);
+	return rc;
+}
+
+/**
+ * _scsih_check_device - checking device responsiveness
+ * @ioc: per adapter object
+ * @parent_sas_address: sas address of parent expander or sas host
+ * @handle: attached device handle
+ * @phy_number: phy number
+ * @link_rate: new link rate
+ */
+static void
+_scsih_check_device(struct MPT3SAS_ADAPTER *ioc,
+	u64 parent_sas_address, u16 handle, u8 phy_number, u8 link_rate)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	struct _sas_device *sas_device;
+	struct _enclosure_node *enclosure_dev = NULL;
+	u32 ioc_status;
+	unsigned long flags;
+	u64 sas_address;
+	struct scsi_target *starget;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	u32 device_info;
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)))
+		return;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		return;
+
+	/* wide port handling ~ we need only handle device once for the phy that
+	 * is matched in sas device page zero
+	 */
+	if (phy_number != sas_device_pg0.PhyNum)
+		return;
+
+	/* check if this is end device */
+	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+	if (!(_scsih_is_end_device(device_info)))
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+	    sas_address);
+
+	if (!sas_device)
+		goto out_unlock;
+
+	if (unlikely(sas_device->handle != handle)) {
+		starget = sas_device->starget;
+		sas_target_priv_data = starget->hostdata;
+		starget_printk(KERN_INFO, starget,
+			"handle changed from(0x%04x) to (0x%04x)!!!\n",
+			sas_device->handle, handle);
+		sas_target_priv_data->handle = handle;
+		sas_device->handle = handle;
+		if (le16_to_cpu(sas_device_pg0.Flags) &
+		     MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
+			sas_device->enclosure_level =
+				sas_device_pg0.EnclosureLevel;
+			memcpy(sas_device->connector_name,
+				sas_device_pg0.ConnectorName, 4);
+			sas_device->connector_name[4] = '\0';
+		} else {
+			sas_device->enclosure_level = 0;
+			sas_device->connector_name[0] = '\0';
+		}
+
+		sas_device->enclosure_handle =
+				le16_to_cpu(sas_device_pg0.EnclosureHandle);
+		sas_device->is_chassis_slot_valid = 0;
+		enclosure_dev = mpt3sas_scsih_enclosure_find_by_handle(ioc,
+						sas_device->enclosure_handle);
+		if (enclosure_dev) {
+			sas_device->enclosure_logical_id =
+			    le64_to_cpu(enclosure_dev->pg0.EnclosureLogicalID);
+			if (le16_to_cpu(enclosure_dev->pg0.Flags) &
+			    MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID) {
+				sas_device->is_chassis_slot_valid = 1;
+				sas_device->chassis_slot =
+					enclosure_dev->pg0.ChassisSlot;
+			}
+		}
+	}
+
+	/* check if device is present */
+	if (!(le16_to_cpu(sas_device_pg0.Flags) &
+	    MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
+		pr_err(MPT3SAS_FMT
+			"device is not present handle(0x%04x), flags!!!\n",
+			ioc->name, handle);
+		goto out_unlock;
+	}
+
+	/* check if there were any issues with discovery */
+	if (_scsih_check_access_status(ioc, sas_address, handle,
+	    sas_device_pg0.AccessStatus))
+		goto out_unlock;
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	_scsih_ublock_io_device(ioc, sas_address);
+
+	if (sas_device)
+		sas_device_put(sas_device);
+	return;
+
+out_unlock:
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (sas_device)
+		sas_device_put(sas_device);
+}
+
+/**
+ * _scsih_add_device -  creating sas device object
+ * @ioc: per adapter object
+ * @handle: sas device handle
+ * @phy_num: phy number end device attached to
+ * @is_pd: is this hidden raid component
+ *
+ * Creating end device object, stored in ioc->sas_device_list.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
+	u8 is_pd)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	struct _sas_device *sas_device;
+	struct _enclosure_node *enclosure_dev = NULL;
+	u32 ioc_status;
+	u64 sas_address;
+	u32 device_info;
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	/* check if this is end device */
+	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+	if (!(_scsih_is_end_device(device_info)))
+		return -1;
+	set_bit(handle, ioc->pend_os_device_add);
+	sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+
+	/* check if device is present */
+	if (!(le16_to_cpu(sas_device_pg0.Flags) &
+	    MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
+		pr_err(MPT3SAS_FMT "device is not present handle(0x04%x)!!!\n",
+			ioc->name, handle);
+		return -1;
+	}
+
+	/* check if there were any issues with discovery */
+	if (_scsih_check_access_status(ioc, sas_address, handle,
+	    sas_device_pg0.AccessStatus))
+		return -1;
+
+	sas_device = mpt3sas_get_sdev_by_addr(ioc,
+					sas_address);
+	if (sas_device) {
+		clear_bit(handle, ioc->pend_os_device_add);
+		sas_device_put(sas_device);
+		return -1;
+	}
+
+	if (sas_device_pg0.EnclosureHandle) {
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+			    le16_to_cpu(sas_device_pg0.EnclosureHandle));
+		if (enclosure_dev == NULL)
+			pr_info(MPT3SAS_FMT "Enclosure handle(0x%04x)"
+			    "doesn't match with enclosure device!\n",
+			    ioc->name, sas_device_pg0.EnclosureHandle);
+	}
+
+	sas_device = kzalloc(sizeof(struct _sas_device),
+	    GFP_KERNEL);
+	if (!sas_device) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 0;
+	}
+
+	kref_init(&sas_device->refcount);
+	sas_device->handle = handle;
+	if (_scsih_get_sas_address(ioc,
+	    le16_to_cpu(sas_device_pg0.ParentDevHandle),
+	    &sas_device->sas_address_parent) != 0)
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+	sas_device->enclosure_handle =
+	    le16_to_cpu(sas_device_pg0.EnclosureHandle);
+	if (sas_device->enclosure_handle != 0)
+		sas_device->slot =
+		    le16_to_cpu(sas_device_pg0.Slot);
+	sas_device->device_info = device_info;
+	sas_device->sas_address = sas_address;
+	sas_device->phy = sas_device_pg0.PhyNum;
+	sas_device->fast_path = (le16_to_cpu(sas_device_pg0.Flags) &
+	    MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0;
+
+	if (le16_to_cpu(sas_device_pg0.Flags)
+		& MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
+		sas_device->enclosure_level =
+			sas_device_pg0.EnclosureLevel;
+		memcpy(sas_device->connector_name,
+			sas_device_pg0.ConnectorName, 4);
+		sas_device->connector_name[4] = '\0';
+	} else {
+		sas_device->enclosure_level = 0;
+		sas_device->connector_name[0] = '\0';
+	}
+	/* get enclosure_logical_id & chassis_slot*/
+	sas_device->is_chassis_slot_valid = 0;
+	if (enclosure_dev) {
+		sas_device->enclosure_logical_id =
+		    le64_to_cpu(enclosure_dev->pg0.EnclosureLogicalID);
+		if (le16_to_cpu(enclosure_dev->pg0.Flags) &
+		    MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID) {
+			sas_device->is_chassis_slot_valid = 1;
+			sas_device->chassis_slot =
+					enclosure_dev->pg0.ChassisSlot;
+		}
+	}
+
+	/* get device name */
+	sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
+
+	if (ioc->wait_for_discovery_to_complete)
+		_scsih_sas_device_init_add(ioc, sas_device);
+	else
+		_scsih_sas_device_add(ioc, sas_device);
+
+	sas_device_put(sas_device);
+	return 0;
+}
+
+/**
+ * _scsih_remove_device -  removing sas device object
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ */
+static void
+_scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+
+	if ((ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) &&
+	     (sas_device->pfa_led_on)) {
+		_scsih_turn_off_pfa_led(ioc, sas_device);
+		sas_device->pfa_led_on = 0;
+	}
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: enter: handle(0x%04x), sas_addr(0x%016llx)\n",
+		ioc->name, __func__,
+	    sas_device->handle, (unsigned long long)
+	    sas_device->sas_address));
+
+	dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+	    NULL, NULL));
+
+	if (sas_device->starget && sas_device->starget->hostdata) {
+		sas_target_priv_data = sas_device->starget->hostdata;
+		sas_target_priv_data->deleted = 1;
+		_scsih_ublock_io_device(ioc, sas_device->sas_address);
+		sas_target_priv_data->handle =
+		     MPT3SAS_INVALID_DEVICE_HANDLE;
+	}
+
+	if (!ioc->hide_drives)
+		mpt3sas_transport_port_remove(ioc,
+		    sas_device->sas_address,
+		    sas_device->sas_address_parent);
+
+	pr_info(MPT3SAS_FMT
+		"removing handle(0x%04x), sas_addr(0x%016llx)\n",
+		ioc->name, sas_device->handle,
+	    (unsigned long long) sas_device->sas_address);
+
+	_scsih_display_enclosure_chassis_info(ioc, sas_device, NULL, NULL);
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: exit: handle(0x%04x), sas_addr(0x%016llx)\n",
+		ioc->name, __func__,
+		sas_device->handle, (unsigned long long)
+		sas_device->sas_address));
+	dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+	    NULL, NULL));
+}
+
+/**
+ * _scsih_sas_topology_change_event_debug - debug for topology event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_topology_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+	u8 phy_number;
+	char *status_str = NULL;
+	u8 link_rate, prev_link_rate;
+
+	switch (event_data->ExpStatus) {
+	case MPI2_EVENT_SAS_TOPO_ES_ADDED:
+		status_str = "add";
+		break;
+	case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING:
+		status_str = "remove";
+		break;
+	case MPI2_EVENT_SAS_TOPO_ES_RESPONDING:
+	case 0:
+		status_str =  "responding";
+		break;
+	case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
+		status_str = "remove delay";
+		break;
+	default:
+		status_str = "unknown status";
+		break;
+	}
+	pr_info(MPT3SAS_FMT "sas topology change: (%s)\n",
+	    ioc->name, status_str);
+	pr_info("\thandle(0x%04x), enclosure_handle(0x%04x) " \
+	    "start_phy(%02d), count(%d)\n",
+	    le16_to_cpu(event_data->ExpanderDevHandle),
+	    le16_to_cpu(event_data->EnclosureHandle),
+	    event_data->StartPhyNum, event_data->NumEntries);
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		phy_number = event_data->StartPhyNum + i;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		switch (reason_code) {
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
+			status_str = "target add";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
+			status_str = "target remove";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
+			status_str = "delay target remove";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+			status_str = "link rate change";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
+			status_str = "target responding";
+			break;
+		default:
+			status_str = "unknown";
+			break;
+		}
+		link_rate = event_data->PHY[i].LinkRate >> 4;
+		prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
+		pr_info("\tphy(%02d), attached_handle(0x%04x): %s:" \
+		    " link rate: new(0x%02x), old(0x%02x)\n", phy_number,
+		    handle, status_str, link_rate, prev_link_rate);
+
+	}
+}
+
+/**
+ * _scsih_sas_topology_change_event - handle topology changes
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ */
+static int
+_scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	int i;
+	u16 parent_handle, handle;
+	u16 reason_code;
+	u8 phy_number, max_phys;
+	struct _sas_node *sas_expander;
+	u64 sas_address;
+	unsigned long flags;
+	u8 link_rate, prev_link_rate;
+	Mpi2EventDataSasTopologyChangeList_t *event_data =
+		(Mpi2EventDataSasTopologyChangeList_t *)
+		fw_event->event_data;
+
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_sas_topology_change_event_debug(ioc, event_data);
+
+	if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
+		return 0;
+
+	if (!ioc->sas_hba.num_phys)
+		_scsih_sas_host_add(ioc);
+	else
+		_scsih_sas_host_refresh(ioc);
+
+	if (fw_event->ignore) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"ignoring expander event\n", ioc->name));
+		return 0;
+	}
+
+	parent_handle = le16_to_cpu(event_data->ExpanderDevHandle);
+
+	/* handle expander add */
+	if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED)
+		if (_scsih_expander_add(ioc, parent_handle) != 0)
+			return 0;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_expander = mpt3sas_scsih_expander_find_by_handle(ioc,
+	    parent_handle);
+	if (sas_expander) {
+		sas_address = sas_expander->sas_address;
+		max_phys = sas_expander->num_phys;
+	} else if (parent_handle < ioc->sas_hba.num_phys) {
+		sas_address = ioc->sas_hba.sas_address;
+		max_phys = ioc->sas_hba.num_phys;
+	} else {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return 0;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	/* handle siblings events */
+	for (i = 0; i < event_data->NumEntries; i++) {
+		if (fw_event->ignore) {
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+				"ignoring expander event\n", ioc->name));
+			return 0;
+		}
+		if (ioc->remove_host || ioc->pci_error_recovery)
+			return 0;
+		phy_number = event_data->StartPhyNum + i;
+		if (phy_number >= max_phys)
+			continue;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		if ((event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code !=
+		    MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
+				continue;
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		link_rate = event_data->PHY[i].LinkRate >> 4;
+		prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
+		switch (reason_code) {
+		case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+
+			if (ioc->shost_recovery)
+				break;
+
+			if (link_rate == prev_link_rate)
+				break;
+
+			mpt3sas_transport_update_links(ioc, sas_address,
+			    handle, phy_number, link_rate);
+
+			if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
+				break;
+
+			_scsih_check_device(ioc, sas_address, handle,
+			    phy_number, link_rate);
+
+			if (!test_bit(handle, ioc->pend_os_device_add))
+				break;
+
+			/* fall through */
+
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
+
+			if (ioc->shost_recovery)
+				break;
+
+			mpt3sas_transport_update_links(ioc, sas_address,
+			    handle, phy_number, link_rate);
+
+			_scsih_add_device(ioc, handle, phy_number, 0);
+
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
+
+			_scsih_device_remove_by_handle(ioc, handle);
+			break;
+		}
+	}
+
+	/* handle expander removal */
+	if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
+	    sas_expander)
+		mpt3sas_expander_remove(ioc, sas_address);
+
+	return 0;
+}
+
+/**
+ * _scsih_sas_device_status_change_event_debug - debug for device event
+ * @ioc: ?
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasDeviceStatusChange_t *event_data)
+{
+	char *reason_str = NULL;
+
+	switch (event_data->ReasonCode) {
+	case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
+		reason_str = "smart data";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+		reason_str = "unsupported device discovered";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
+		reason_str = "internal device reset";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
+		reason_str = "internal task abort";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
+		reason_str = "internal task abort set";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
+		reason_str = "internal clear task set";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
+		reason_str = "internal query task";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE:
+		reason_str = "sata init failure";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
+		reason_str = "internal device reset complete";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
+		reason_str = "internal task abort complete";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION:
+		reason_str = "internal async notification";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY:
+		reason_str = "expander reduced functionality";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY:
+		reason_str = "expander reduced functionality complete";
+		break;
+	default:
+		reason_str = "unknown reason";
+		break;
+	}
+	pr_info(MPT3SAS_FMT "device status change: (%s)\n"
+	    "\thandle(0x%04x), sas address(0x%016llx), tag(%d)",
+	    ioc->name, reason_str, le16_to_cpu(event_data->DevHandle),
+	    (unsigned long long)le64_to_cpu(event_data->SASAddress),
+	    le16_to_cpu(event_data->TaskTag));
+	if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA)
+		pr_info(MPT3SAS_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
+		    event_data->ASC, event_data->ASCQ);
+	pr_info("\n");
+}
+
+/**
+ * _scsih_sas_device_status_change_event - handle device status change
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	struct MPT3SAS_TARGET *target_priv_data;
+	struct _sas_device *sas_device;
+	u64 sas_address;
+	unsigned long flags;
+	Mpi2EventDataSasDeviceStatusChange_t *event_data =
+		(Mpi2EventDataSasDeviceStatusChange_t *)
+		fw_event->event_data;
+
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_sas_device_status_change_event_debug(ioc,
+		     event_data);
+
+	/* In MPI Revision K (0xC), the internal device reset complete was
+	 * implemented, so avoid setting tm_busy flag for older firmware.
+	 */
+	if ((ioc->facts.HeaderVersion >> 8) < 0xC)
+		return;
+
+	if (event_data->ReasonCode !=
+	    MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
+	   event_data->ReasonCode !=
+	    MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_address = le64_to_cpu(event_data->SASAddress);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+	    sas_address);
+
+	if (!sas_device || !sas_device->starget)
+		goto out;
+
+	target_priv_data = sas_device->starget->hostdata;
+	if (!target_priv_data)
+		goto out;
+
+	if (event_data->ReasonCode ==
+	    MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
+		target_priv_data->tm_busy = 1;
+	else
+		target_priv_data->tm_busy = 0;
+
+out:
+	if (sas_device)
+		sas_device_put(sas_device);
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+
+/**
+ * _scsih_check_pcie_access_status - check access flags
+ * @ioc: per adapter object
+ * @wwid: wwid
+ * @handle: sas device handle
+ * @access_status: errors returned during discovery of the device
+ *
+ * Return: 0 for success, else failure
+ */
+static u8
+_scsih_check_pcie_access_status(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
+	u16 handle, u8 access_status)
+{
+	u8 rc = 1;
+	char *desc = NULL;
+
+	switch (access_status) {
+	case MPI26_PCIEDEV0_ASTATUS_NO_ERRORS:
+	case MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION:
+		rc = 0;
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED:
+		desc = "PCIe device capability failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED:
+		desc = "PCIe device blocked";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED:
+		desc = "PCIe device mem space access failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE:
+		desc = "PCIe device unsupported";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED:
+		desc = "PCIe device MSIx Required";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX:
+		desc = "PCIe device init fail max";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_UNKNOWN:
+		desc = "PCIe device status unknown";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT:
+		desc = "nvme ready timeout";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED:
+		desc = "nvme device configuration unsupported";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED:
+		desc = "nvme identify failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED:
+		desc = "nvme qconfig failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED:
+		desc = "nvme qcreation failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED:
+		desc = "nvme eventcfg failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED:
+		desc = "nvme get feature stat failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT:
+		desc = "nvme idle timeout";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS:
+		desc = "nvme failure status";
+		break;
+	default:
+		pr_err(MPT3SAS_FMT
+		    " NVMe discovery error(0x%02x): wwid(0x%016llx),"
+			"handle(0x%04x)\n", ioc->name, access_status,
+			(unsigned long long)wwid, handle);
+		return rc;
+	}
+
+	if (!rc)
+		return rc;
+
+	pr_info(MPT3SAS_FMT
+		"NVMe discovery error(%s): wwid(0x%016llx), handle(0x%04x)\n",
+			ioc->name, desc,
+			(unsigned long long)wwid, handle);
+	return rc;
+}
+
+/**
+ * _scsih_pcie_device_remove_from_sml -  removing pcie device
+ * from SML and free up associated memory
+ * @ioc: per adapter object
+ * @pcie_device: the pcie_device object
+ */
+static void
+_scsih_pcie_device_remove_from_sml(struct MPT3SAS_ADAPTER *ioc,
+	struct _pcie_device *pcie_device)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+	    "%s: enter: handle(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+	    pcie_device->handle, (unsigned long long)
+	    pcie_device->wwid));
+	if (pcie_device->enclosure_handle != 0)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: enter: enclosure logical id(0x%016llx), slot(%d)\n",
+		    ioc->name, __func__,
+		    (unsigned long long)pcie_device->enclosure_logical_id,
+		    pcie_device->slot));
+	if (pcie_device->connector_name[0] != '\0')
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: enter: enclosure level(0x%04x), connector name( %s)\n",
+		    ioc->name, __func__,
+		    pcie_device->enclosure_level,
+		    pcie_device->connector_name));
+
+	if (pcie_device->starget && pcie_device->starget->hostdata) {
+		sas_target_priv_data = pcie_device->starget->hostdata;
+		sas_target_priv_data->deleted = 1;
+		_scsih_ublock_io_device(ioc, pcie_device->wwid);
+		sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+	}
+
+	pr_info(MPT3SAS_FMT
+		"removing handle(0x%04x), wwid (0x%016llx)\n",
+		ioc->name, pcie_device->handle,
+		(unsigned long long) pcie_device->wwid);
+	if (pcie_device->enclosure_handle != 0)
+		pr_info(MPT3SAS_FMT
+		    "removing : enclosure logical id(0x%016llx), slot(%d)\n",
+		    ioc->name,
+		    (unsigned long long)pcie_device->enclosure_logical_id,
+		    pcie_device->slot);
+	if (pcie_device->connector_name[0] != '\0')
+		pr_info(MPT3SAS_FMT
+		    "removing: enclosure level(0x%04x), connector name( %s)\n",
+		    ioc->name, pcie_device->enclosure_level,
+		    pcie_device->connector_name);
+
+	if (pcie_device->starget)
+		scsi_remove_target(&pcie_device->starget->dev);
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+	    "%s: exit: handle(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+	    pcie_device->handle, (unsigned long long)
+	    pcie_device->wwid));
+	if (pcie_device->enclosure_handle != 0)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: exit: enclosure logical id(0x%016llx), slot(%d)\n",
+			ioc->name, __func__,
+			(unsigned long long)pcie_device->enclosure_logical_id,
+			pcie_device->slot));
+	if (pcie_device->connector_name[0] != '\0')
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: exit: enclosure level(0x%04x), connector name( %s)\n",
+		    ioc->name, __func__, pcie_device->enclosure_level,
+		    pcie_device->connector_name));
+
+	kfree(pcie_device->serial_number);
+}
+
+
+/**
+ * _scsih_pcie_check_device - checking device responsiveness
+ * @ioc: per adapter object
+ * @handle: attached device handle
+ */
+static void
+_scsih_pcie_check_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi26PCIeDevicePage0_t pcie_device_pg0;
+	u32 ioc_status;
+	struct _pcie_device *pcie_device;
+	u64 wwid;
+	unsigned long flags;
+	struct scsi_target *starget;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	u32 device_info;
+
+	if ((mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+		&pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle)))
+		return;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		return;
+
+	/* check if this is end device */
+	device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
+	if (!(_scsih_is_nvme_device(device_info)))
+		return;
+
+	wwid = le64_to_cpu(pcie_device_pg0.WWID);
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device = __mpt3sas_get_pdev_by_wwid(ioc, wwid);
+
+	if (!pcie_device) {
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		return;
+	}
+
+	if (unlikely(pcie_device->handle != handle)) {
+		starget = pcie_device->starget;
+		sas_target_priv_data = starget->hostdata;
+		starget_printk(KERN_INFO, starget,
+		    "handle changed from(0x%04x) to (0x%04x)!!!\n",
+		    pcie_device->handle, handle);
+		sas_target_priv_data->handle = handle;
+		pcie_device->handle = handle;
+
+		if (le32_to_cpu(pcie_device_pg0.Flags) &
+		    MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID) {
+			pcie_device->enclosure_level =
+			    pcie_device_pg0.EnclosureLevel;
+			memcpy(&pcie_device->connector_name[0],
+			    &pcie_device_pg0.ConnectorName[0], 4);
+		} else {
+			pcie_device->enclosure_level = 0;
+			pcie_device->connector_name[0] = '\0';
+		}
+	}
+
+	/* check if device is present */
+	if (!(le32_to_cpu(pcie_device_pg0.Flags) &
+	    MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT)) {
+		pr_info(MPT3SAS_FMT
+		    "device is not present handle(0x%04x), flags!!!\n",
+		    ioc->name, handle);
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		pcie_device_put(pcie_device);
+		return;
+	}
+
+	/* check if there were any issues with discovery */
+	if (_scsih_check_pcie_access_status(ioc, wwid, handle,
+	    pcie_device_pg0.AccessStatus)) {
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		pcie_device_put(pcie_device);
+		return;
+	}
+
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+	pcie_device_put(pcie_device);
+
+	_scsih_ublock_io_device(ioc, wwid);
+
+	return;
+}
+
+/**
+ * _scsih_pcie_add_device -  creating pcie device object
+ * @ioc: per adapter object
+ * @handle: pcie device handle
+ *
+ * Creating end device object, stored in ioc->pcie_device_list.
+ *
+ * Return: 1 means queue the event later, 0 means complete the event
+ */
+static int
+_scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi26PCIeDevicePage0_t pcie_device_pg0;
+	Mpi26PCIeDevicePage2_t pcie_device_pg2;
+	Mpi2ConfigReply_t mpi_reply;
+	struct _pcie_device *pcie_device;
+	struct _enclosure_node *enclosure_dev;
+	u32 ioc_status;
+	u64 wwid;
+
+	if ((mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+	    &pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 0;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 0;
+	}
+
+	set_bit(handle, ioc->pend_os_device_add);
+	wwid = le64_to_cpu(pcie_device_pg0.WWID);
+
+	/* check if device is present */
+	if (!(le32_to_cpu(pcie_device_pg0.Flags) &
+		MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT)) {
+		pr_err(MPT3SAS_FMT
+		    "device is not present handle(0x04%x)!!!\n",
+		    ioc->name, handle);
+		return 0;
+	}
+
+	/* check if there were any issues with discovery */
+	if (_scsih_check_pcie_access_status(ioc, wwid, handle,
+	    pcie_device_pg0.AccessStatus))
+		return 0;
+
+	if (!(_scsih_is_nvme_device(le32_to_cpu(pcie_device_pg0.DeviceInfo))))
+		return 0;
+
+	pcie_device = mpt3sas_get_pdev_by_wwid(ioc, wwid);
+	if (pcie_device) {
+		clear_bit(handle, ioc->pend_os_device_add);
+		pcie_device_put(pcie_device);
+		return 0;
+	}
+
+	pcie_device = kzalloc(sizeof(struct _pcie_device), GFP_KERNEL);
+	if (!pcie_device) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			ioc->name, __FILE__, __LINE__, __func__);
+		return 0;
+	}
+
+	kref_init(&pcie_device->refcount);
+	pcie_device->id = ioc->pcie_target_id++;
+	pcie_device->channel = PCIE_CHANNEL;
+	pcie_device->handle = handle;
+	pcie_device->device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
+	pcie_device->wwid = wwid;
+	pcie_device->port_num = pcie_device_pg0.PortNum;
+	pcie_device->fast_path = (le32_to_cpu(pcie_device_pg0.Flags) &
+	    MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0;
+
+	pcie_device->enclosure_handle =
+	    le16_to_cpu(pcie_device_pg0.EnclosureHandle);
+	if (pcie_device->enclosure_handle != 0)
+		pcie_device->slot = le16_to_cpu(pcie_device_pg0.Slot);
+
+	if (le32_to_cpu(pcie_device_pg0.Flags) &
+	    MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID) {
+		pcie_device->enclosure_level = pcie_device_pg0.EnclosureLevel;
+		memcpy(&pcie_device->connector_name[0],
+		    &pcie_device_pg0.ConnectorName[0], 4);
+	} else {
+		pcie_device->enclosure_level = 0;
+		pcie_device->connector_name[0] = '\0';
+	}
+
+	/* get enclosure_logical_id */
+	if (pcie_device->enclosure_handle) {
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+						pcie_device->enclosure_handle);
+		if (enclosure_dev)
+			pcie_device->enclosure_logical_id =
+			    le64_to_cpu(enclosure_dev->pg0.EnclosureLogicalID);
+	}
+	/* TODO -- Add device name once FW supports it */
+	if (mpt3sas_config_get_pcie_device_pg2(ioc, &mpi_reply,
+		&pcie_device_pg2, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+				ioc->name, __FILE__, __LINE__, __func__);
+		kfree(pcie_device);
+		return 0;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			ioc->name, __FILE__, __LINE__, __func__);
+		kfree(pcie_device);
+		return 0;
+	}
+	pcie_device->nvme_mdts =
+		le32_to_cpu(pcie_device_pg2.MaximumDataTransferSize);
+	if (pcie_device_pg2.ControllerResetTO)
+		pcie_device->reset_timeout =
+			pcie_device_pg2.ControllerResetTO;
+	else
+		pcie_device->reset_timeout = 30;
+
+	if (ioc->wait_for_discovery_to_complete)
+		_scsih_pcie_device_init_add(ioc, pcie_device);
+	else
+		_scsih_pcie_device_add(ioc, pcie_device);
+
+	pcie_device_put(pcie_device);
+	return 0;
+}
+
+/**
+ * _scsih_pcie_topology_change_event_debug - debug for topology
+ * event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_pcie_topology_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+	u8 port_number;
+	char *status_str = NULL;
+	u8 link_rate, prev_link_rate;
+
+	switch (event_data->SwitchStatus) {
+	case MPI26_EVENT_PCIE_TOPO_SS_ADDED:
+		status_str = "add";
+		break;
+	case MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING:
+		status_str = "remove";
+		break;
+	case MPI26_EVENT_PCIE_TOPO_SS_RESPONDING:
+	case 0:
+		status_str =  "responding";
+		break;
+	case MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING:
+		status_str = "remove delay";
+		break;
+	default:
+		status_str = "unknown status";
+		break;
+	}
+	pr_info(MPT3SAS_FMT "pcie topology change: (%s)\n",
+		ioc->name, status_str);
+	pr_info("\tswitch_handle(0x%04x), enclosure_handle(0x%04x)"
+		"start_port(%02d), count(%d)\n",
+		le16_to_cpu(event_data->SwitchDevHandle),
+		le16_to_cpu(event_data->EnclosureHandle),
+		event_data->StartPortNum, event_data->NumEntries);
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle =
+			le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		port_number = event_data->StartPortNum + i;
+		reason_code = event_data->PortEntry[i].PortStatus;
+		switch (reason_code) {
+		case MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED:
+			status_str = "target add";
+			break;
+		case MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+			status_str = "target remove";
+			break;
+		case MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING:
+			status_str = "delay target remove";
+			break;
+		case MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
+			status_str = "link rate change";
+			break;
+		case MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE:
+			status_str = "target responding";
+			break;
+		default:
+			status_str = "unknown";
+			break;
+		}
+		link_rate = event_data->PortEntry[i].CurrentPortInfo &
+			MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+		prev_link_rate = event_data->PortEntry[i].PreviousPortInfo &
+			MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+		pr_info("\tport(%02d), attached_handle(0x%04x): %s:"
+			" link rate: new(0x%02x), old(0x%02x)\n", port_number,
+			handle, status_str, link_rate, prev_link_rate);
+	}
+}
+
+/**
+ * _scsih_pcie_topology_change_event - handle PCIe topology
+ *  changes
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ */
+static void
+_scsih_pcie_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+	u8 link_rate, prev_link_rate;
+	unsigned long flags;
+	int rc;
+	Mpi26EventDataPCIeTopologyChangeList_t *event_data =
+		(Mpi26EventDataPCIeTopologyChangeList_t *) fw_event->event_data;
+	struct _pcie_device *pcie_device;
+
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_pcie_topology_change_event_debug(ioc, event_data);
+
+	if (ioc->shost_recovery || ioc->remove_host ||
+		ioc->pci_error_recovery)
+		return;
+
+	if (fw_event->ignore) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT "ignoring switch event\n",
+			ioc->name));
+		return;
+	}
+
+	/* handle siblings events */
+	for (i = 0; i < event_data->NumEntries; i++) {
+		if (fw_event->ignore) {
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+				"ignoring switch event\n", ioc->name));
+			return;
+		}
+		if (ioc->remove_host || ioc->pci_error_recovery)
+			return;
+		reason_code = event_data->PortEntry[i].PortStatus;
+		handle =
+			le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+
+		link_rate = event_data->PortEntry[i].CurrentPortInfo
+			& MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+		prev_link_rate = event_data->PortEntry[i].PreviousPortInfo
+			& MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+
+		switch (reason_code) {
+		case MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
+			if (ioc->shost_recovery)
+				break;
+			if (link_rate == prev_link_rate)
+				break;
+			if (link_rate < MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5)
+				break;
+
+			_scsih_pcie_check_device(ioc, handle);
+
+			/* This code after this point handles the test case
+			 * where a device has been added, however its returning
+			 * BUSY for sometime.  Then before the Device Missing
+			 * Delay expires and the device becomes READY, the
+			 * device is removed and added back.
+			 */
+			spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+			pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+			spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+			if (pcie_device) {
+				pcie_device_put(pcie_device);
+				break;
+			}
+
+			if (!test_bit(handle, ioc->pend_os_device_add))
+				break;
+
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+				"handle(0x%04x) device not found: convert "
+				"event to a device add\n", ioc->name, handle));
+			event_data->PortEntry[i].PortStatus &= 0xF0;
+			event_data->PortEntry[i].PortStatus |=
+				MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED;
+			/* fall through */
+		case MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED:
+			if (ioc->shost_recovery)
+				break;
+			if (link_rate < MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5)
+				break;
+
+			rc = _scsih_pcie_add_device(ioc, handle);
+			if (!rc) {
+				/* mark entry vacant */
+				/* TODO This needs to be reviewed and fixed,
+				 * we dont have an entry
+				 * to make an event void like vacant
+				 */
+				event_data->PortEntry[i].PortStatus |=
+					MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE;
+			}
+			break;
+		case MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+			_scsih_pcie_device_remove_by_handle(ioc, handle);
+			break;
+		}
+	}
+}
+
+/**
+ * _scsih_pcie_device_status_change_event_debug - debug for device event
+ * @ioc: ?
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_pcie_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi26EventDataPCIeDeviceStatusChange_t *event_data)
+{
+	char *reason_str = NULL;
+
+	switch (event_data->ReasonCode) {
+	case MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA:
+		reason_str = "smart data";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED:
+		reason_str = "unsupported device discovered";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET:
+		reason_str = "internal device reset";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL:
+		reason_str = "internal task abort";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
+		reason_str = "internal task abort set";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
+		reason_str = "internal clear task set";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL:
+		reason_str = "internal query task";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE:
+		reason_str = "device init failure";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
+		reason_str = "internal device reset complete";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
+		reason_str = "internal task abort complete";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION:
+		reason_str = "internal async notification";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED:
+		reason_str = "pcie hot reset failed";
+		break;
+	default:
+		reason_str = "unknown reason";
+		break;
+	}
+
+	pr_info(MPT3SAS_FMT "PCIE device status change: (%s)\n"
+		"\thandle(0x%04x), WWID(0x%016llx), tag(%d)",
+		ioc->name, reason_str, le16_to_cpu(event_data->DevHandle),
+		(unsigned long long)le64_to_cpu(event_data->WWID),
+		le16_to_cpu(event_data->TaskTag));
+	if (event_data->ReasonCode == MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA)
+		pr_info(MPT3SAS_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
+			event_data->ASC, event_data->ASCQ);
+	pr_info("\n");
+}
+
+/**
+ * _scsih_pcie_device_status_change_event - handle device status
+ * change
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_pcie_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	struct MPT3SAS_TARGET *target_priv_data;
+	struct _pcie_device *pcie_device;
+	u64 wwid;
+	unsigned long flags;
+	Mpi26EventDataPCIeDeviceStatusChange_t *event_data =
+		(Mpi26EventDataPCIeDeviceStatusChange_t *)fw_event->event_data;
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_pcie_device_status_change_event_debug(ioc,
+			event_data);
+
+	if (event_data->ReasonCode !=
+		MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET &&
+		event_data->ReasonCode !=
+		MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
+		return;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	wwid = le64_to_cpu(event_data->WWID);
+	pcie_device = __mpt3sas_get_pdev_by_wwid(ioc, wwid);
+
+	if (!pcie_device || !pcie_device->starget)
+		goto out;
+
+	target_priv_data = pcie_device->starget->hostdata;
+	if (!target_priv_data)
+		goto out;
+
+	if (event_data->ReasonCode ==
+		MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET)
+		target_priv_data->tm_busy = 1;
+	else
+		target_priv_data->tm_busy = 0;
+out:
+	if (pcie_device)
+		pcie_device_put(pcie_device);
+
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+
+/**
+ * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure
+ * event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_enclosure_dev_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasEnclDevStatusChange_t *event_data)
+{
+	char *reason_str = NULL;
+
+	switch (event_data->ReasonCode) {
+	case MPI2_EVENT_SAS_ENCL_RC_ADDED:
+		reason_str = "enclosure add";
+		break;
+	case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING:
+		reason_str = "enclosure remove";
+		break;
+	default:
+		reason_str = "unknown reason";
+		break;
+	}
+
+	pr_info(MPT3SAS_FMT "enclosure status change: (%s)\n"
+	    "\thandle(0x%04x), enclosure logical id(0x%016llx)"
+	    " number slots(%d)\n", ioc->name, reason_str,
+	    le16_to_cpu(event_data->EnclosureHandle),
+	    (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
+	    le16_to_cpu(event_data->StartSlot));
+}
+
+/**
+ * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_enclosure_dev_status_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	struct _enclosure_node *enclosure_dev = NULL;
+	Mpi2EventDataSasEnclDevStatusChange_t *event_data =
+		(Mpi2EventDataSasEnclDevStatusChange_t *)fw_event->event_data;
+	int rc;
+	u16 enclosure_handle = le16_to_cpu(event_data->EnclosureHandle);
+
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_sas_enclosure_dev_status_change_event_debug(ioc,
+		     (Mpi2EventDataSasEnclDevStatusChange_t *)
+		     fw_event->event_data);
+	if (ioc->shost_recovery)
+		return;
+
+	if (enclosure_handle)
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+						enclosure_handle);
+	switch (event_data->ReasonCode) {
+	case MPI2_EVENT_SAS_ENCL_RC_ADDED:
+		if (!enclosure_dev) {
+			enclosure_dev =
+				kzalloc(sizeof(struct _enclosure_node),
+					GFP_KERNEL);
+			if (!enclosure_dev) {
+				pr_info(MPT3SAS_FMT
+					"failure at %s:%d/%s()!\n", ioc->name,
+					__FILE__, __LINE__, __func__);
+				return;
+			}
+			rc = mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+				&enclosure_dev->pg0,
+				MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+				enclosure_handle);
+
+			if (rc || (le16_to_cpu(mpi_reply.IOCStatus) &
+						MPI2_IOCSTATUS_MASK)) {
+				kfree(enclosure_dev);
+				return;
+			}
+
+			list_add_tail(&enclosure_dev->list,
+							&ioc->enclosure_list);
+		}
+		break;
+	case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING:
+		if (enclosure_dev) {
+			list_del(&enclosure_dev->list);
+			kfree(enclosure_dev);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * _scsih_sas_broadcast_primitive_event - handle broadcast events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_broadcast_primitive_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	struct scsi_cmnd *scmd;
+	struct scsi_device *sdev;
+	struct scsiio_tracker *st;
+	u16 smid, handle;
+	u32 lun;
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	u32 termination_count;
+	u32 query_count;
+	Mpi2SCSITaskManagementReply_t *mpi_reply;
+	Mpi2EventDataSasBroadcastPrimitive_t *event_data =
+		(Mpi2EventDataSasBroadcastPrimitive_t *)
+		fw_event->event_data;
+	u16 ioc_status;
+	unsigned long flags;
+	int r;
+	u8 max_retries = 0;
+	u8 task_abort_retries;
+
+	mutex_lock(&ioc->tm_cmds.mutex);
+	pr_info(MPT3SAS_FMT
+		"%s: enter: phy number(%d), width(%d)\n",
+		ioc->name, __func__, event_data->PhyNum,
+	     event_data->PortWidth);
+
+	_scsih_block_io_all_device(ioc);
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	mpi_reply = ioc->tm_cmds.reply;
+ broadcast_aen_retry:
+
+	/* sanity checks for retrying this loop */
+	if (max_retries++ == 5) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT "%s: giving up\n",
+		    ioc->name, __func__));
+		goto out;
+	} else if (max_retries > 1)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT "%s: %d retry\n",
+		    ioc->name, __func__, max_retries - 1));
+
+	termination_count = 0;
+	query_count = 0;
+	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
+		if (ioc->shost_recovery)
+			goto out;
+		scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+		if (!scmd)
+			continue;
+		st = scsi_cmd_priv(scmd);
+		sdev = scmd->device;
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
+			continue;
+		 /* skip hidden raid components */
+		if (sas_device_priv_data->sas_target->flags &
+		    MPT_TARGET_FLAGS_RAID_COMPONENT)
+			continue;
+		 /* skip volumes */
+		if (sas_device_priv_data->sas_target->flags &
+		    MPT_TARGET_FLAGS_VOLUME)
+			continue;
+		 /* skip PCIe devices */
+		if (sas_device_priv_data->sas_target->flags &
+		    MPT_TARGET_FLAGS_PCIE_DEVICE)
+			continue;
+
+		handle = sas_device_priv_data->sas_target->handle;
+		lun = sas_device_priv_data->lun;
+		query_count++;
+
+		if (ioc->shost_recovery)
+			goto out;
+
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		r = mpt3sas_scsih_issue_tm(ioc, handle, lun,
+			MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, st->smid,
+			st->msix_io, 30, 0);
+		if (r == FAILED) {
+			sdev_printk(KERN_WARNING, sdev,
+			    "mpt3sas_scsih_issue_tm: FAILED when sending "
+			    "QUERY_TASK: scmd(%p)\n", scmd);
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			goto broadcast_aen_retry;
+		}
+		ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
+		    & MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			sdev_printk(KERN_WARNING, sdev,
+				"query task: FAILED with IOCSTATUS(0x%04x), scmd(%p)\n",
+				ioc_status, scmd);
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			goto broadcast_aen_retry;
+		}
+
+		/* see if IO is still owned by IOC and target */
+		if (mpi_reply->ResponseCode ==
+		     MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
+		     mpi_reply->ResponseCode ==
+		     MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC) {
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			continue;
+		}
+		task_abort_retries = 0;
+ tm_retry:
+		if (task_abort_retries++ == 60) {
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			    "%s: ABORT_TASK: giving up\n", ioc->name,
+			    __func__));
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			goto broadcast_aen_retry;
+		}
+
+		if (ioc->shost_recovery)
+			goto out_no_lock;
+
+		r = mpt3sas_scsih_issue_tm(ioc, handle, sdev->lun,
+			MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, st->smid,
+			st->msix_io, 30, 0);
+		if (r == FAILED || st->cb_idx != 0xFF) {
+			sdev_printk(KERN_WARNING, sdev,
+			    "mpt3sas_scsih_issue_tm: ABORT_TASK: FAILED : "
+			    "scmd(%p)\n", scmd);
+			goto tm_retry;
+		}
+
+		if (task_abort_retries > 1)
+			sdev_printk(KERN_WARNING, sdev,
+			    "mpt3sas_scsih_issue_tm: ABORT_TASK: RETRIES (%d):"
+			    " scmd(%p)\n",
+			    task_abort_retries - 1, scmd);
+
+		termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+		spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	}
+
+	if (ioc->broadcast_aen_pending) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: loop back due to pending AEN\n",
+			ioc->name, __func__));
+		 ioc->broadcast_aen_pending = 0;
+		 goto broadcast_aen_retry;
+	}
+
+ out:
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ out_no_lock:
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+	    "%s - exit, query_count = %d termination_count = %d\n",
+	    ioc->name, __func__, query_count, termination_count));
+
+	ioc->broadcast_aen_busy = 0;
+	if (!ioc->shost_recovery)
+		_scsih_ublock_io_all_device(ioc);
+	mutex_unlock(&ioc->tm_cmds.mutex);
+}
+
+/**
+ * _scsih_sas_discovery_event - handle discovery events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_discovery_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi2EventDataSasDiscovery_t *event_data =
+		(Mpi2EventDataSasDiscovery_t *) fw_event->event_data;
+
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
+		pr_info(MPT3SAS_FMT "discovery event: (%s)", ioc->name,
+		    (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
+		    "start" : "stop");
+		if (event_data->DiscoveryStatus)
+			pr_info("discovery_status(0x%08x)",
+			    le32_to_cpu(event_data->DiscoveryStatus));
+		pr_info("\n");
+	}
+
+	if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
+	    !ioc->sas_hba.num_phys) {
+		if (disable_discovery > 0 && ioc->shost_recovery) {
+			/* Wait for the reset to complete */
+			while (ioc->shost_recovery)
+				ssleep(1);
+		}
+		_scsih_sas_host_add(ioc);
+	}
+}
+
+/**
+ * _scsih_sas_device_discovery_error_event - display SAS device discovery error
+ *						events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_device_discovery_error_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi25EventDataSasDeviceDiscoveryError_t *event_data =
+		(Mpi25EventDataSasDeviceDiscoveryError_t *)fw_event->event_data;
+
+	switch (event_data->ReasonCode) {
+	case MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED:
+		pr_warn(MPT3SAS_FMT "SMP command sent to the expander"
+			"(handle:0x%04x, sas_address:0x%016llx,"
+			"physical_port:0x%02x) has failed",
+			ioc->name, le16_to_cpu(event_data->DevHandle),
+			(unsigned long long)le64_to_cpu(event_data->SASAddress),
+			event_data->PhysicalPort);
+		break;
+	case MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT:
+		pr_warn(MPT3SAS_FMT "SMP command sent to the expander"
+			"(handle:0x%04x, sas_address:0x%016llx,"
+			"physical_port:0x%02x) has timed out",
+			ioc->name, le16_to_cpu(event_data->DevHandle),
+			(unsigned long long)le64_to_cpu(event_data->SASAddress),
+			event_data->PhysicalPort);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * _scsih_pcie_enumeration_event - handle enumeration events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_pcie_enumeration_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi26EventDataPCIeEnumeration_t *event_data =
+		(Mpi26EventDataPCIeEnumeration_t *)fw_event->event_data;
+
+	if (!(ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK))
+		return;
+
+	pr_info(MPT3SAS_FMT "pcie enumeration event: (%s) Flag 0x%02x",
+		ioc->name,
+		(event_data->ReasonCode == MPI26_EVENT_PCIE_ENUM_RC_STARTED) ?
+			"started" : "completed",
+		event_data->Flags);
+	if (event_data->EnumerationStatus)
+		pr_cont("enumeration_status(0x%08x)",
+			le32_to_cpu(event_data->EnumerationStatus));
+	pr_cont("\n");
+}
+
+/**
+ * _scsih_ir_fastpath - turn on fastpath for IR physdisk
+ * @ioc: per adapter object
+ * @handle: device handle for physical disk
+ * @phys_disk_num: physical disk number
+ *
+ * Return: 0 for success, else failure.
+ */
+static int
+_scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num)
+{
+	Mpi2RaidActionRequest_t *mpi_request;
+	Mpi2RaidActionReply_t *mpi_reply;
+	u16 smid;
+	u8 issue_reset = 0;
+	int rc = 0;
+	u16 ioc_status;
+	u32 log_info;
+
+	if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+		return rc;
+
+	mutex_lock(&ioc->scsih_cmds.mutex);
+
+	if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: scsih_cmd in use\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->scsih_cmds.status = MPT3_CMD_PENDING;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->scsih_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
+
+	mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
+	mpi_request->Action = MPI2_RAID_ACTION_PHYSDISK_HIDDEN;
+	mpi_request->PhysDiskNum = phys_disk_num;
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT "IR RAID_ACTION: turning fast "\
+	    "path on for handle(0x%04x), phys_disk_num (0x%02x)\n", ioc->name,
+	    handle, phys_disk_num));
+
+	init_completion(&ioc->scsih_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
+
+	if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
+		issue_reset =
+			mpt3sas_base_check_cmd_timeout(ioc,
+				ioc->scsih_cmds.status, mpi_request,
+				sizeof(Mpi2RaidActionRequest_t)/4);
+		rc = -EFAULT;
+		goto out;
+	}
+
+	if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
+
+		mpi_reply = ioc->scsih_cmds.reply;
+		ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+		if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
+			log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);
+		else
+			log_info = 0;
+		ioc_status &= MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			    "IR RAID_ACTION: failed: ioc_status(0x%04x), "
+			    "loginfo(0x%08x)!!!\n", ioc->name, ioc_status,
+			    log_info));
+			rc = -EFAULT;
+		} else
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			    "IR RAID_ACTION: completed successfully\n",
+			    ioc->name));
+	}
+
+ out:
+	ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_unlock(&ioc->scsih_cmds.mutex);
+
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+	return rc;
+}
+
+/**
+ * _scsih_reprobe_lun - reprobing lun
+ * @sdev: scsi device struct
+ * @no_uld_attach: sdev->no_uld_attach flag setting
+ *
+ **/
+static void
+_scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
+{
+	sdev->no_uld_attach = no_uld_attach ? 1 : 0;
+	sdev_printk(KERN_INFO, sdev, "%s raid component\n",
+	    sdev->no_uld_attach ? "hiding" : "exposing");
+	WARN_ON(scsi_device_reprobe(sdev));
+}
+
+/**
+ * _scsih_sas_volume_add - add new volume
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ */
+static void
+_scsih_sas_volume_add(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	u64 wwid;
+	u16 handle = le16_to_cpu(element->VolDevHandle);
+	int rc;
+
+	mpt3sas_config_get_volume_wwid(ioc, handle, &wwid);
+	if (!wwid) {
+		pr_err(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name,
+		    __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid);
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+	if (raid_device)
+		return;
+
+	raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
+	if (!raid_device) {
+		pr_err(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name,
+		    __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	raid_device->id = ioc->sas_id++;
+	raid_device->channel = RAID_CHANNEL;
+	raid_device->handle = handle;
+	raid_device->wwid = wwid;
+	_scsih_raid_device_add(ioc, raid_device);
+	if (!ioc->wait_for_discovery_to_complete) {
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+	} else {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		_scsih_determine_boot_device(ioc, raid_device, 1);
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+}
+
+/**
+ * _scsih_sas_volume_delete - delete volume
+ * @ioc: per adapter object
+ * @handle: volume device handle
+ * Context: user.
+ */
+static void
+_scsih_sas_volume_delete(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct scsi_target *starget = NULL;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+	if (raid_device) {
+		if (raid_device->starget) {
+			starget = raid_device->starget;
+			sas_target_priv_data = starget->hostdata;
+			sas_target_priv_data->deleted = 1;
+		}
+		pr_info(MPT3SAS_FMT "removing handle(0x%04x), wwid(0x%016llx)\n",
+			ioc->name,  raid_device->handle,
+		    (unsigned long long) raid_device->wwid);
+		list_del(&raid_device->list);
+		kfree(raid_device);
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	if (starget)
+		scsi_remove_target(&starget->dev);
+}
+
+/**
+ * _scsih_sas_pd_expose - expose pd component to /dev/sdX
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ */
+static void
+_scsih_sas_pd_expose(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _sas_device *sas_device;
+	struct scsi_target *starget = NULL;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	unsigned long flags;
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (sas_device) {
+		sas_device->volume_handle = 0;
+		sas_device->volume_wwid = 0;
+		clear_bit(handle, ioc->pd_handles);
+		if (sas_device->starget && sas_device->starget->hostdata) {
+			starget = sas_device->starget;
+			sas_target_priv_data = starget->hostdata;
+			sas_target_priv_data->flags &=
+			    ~MPT_TARGET_FLAGS_RAID_COMPONENT;
+		}
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (!sas_device)
+		return;
+
+	/* exposing raid component */
+	if (starget)
+		starget_for_each_device(starget, NULL, _scsih_reprobe_lun);
+
+	sas_device_put(sas_device);
+}
+
+/**
+ * _scsih_sas_pd_hide - hide pd component from /dev/sdX
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ */
+static void
+_scsih_sas_pd_hide(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _sas_device *sas_device;
+	struct scsi_target *starget = NULL;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	unsigned long flags;
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+	u16 volume_handle = 0;
+	u64 volume_wwid = 0;
+
+	mpt3sas_config_get_volume_handle(ioc, handle, &volume_handle);
+	if (volume_handle)
+		mpt3sas_config_get_volume_wwid(ioc, volume_handle,
+		    &volume_wwid);
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (sas_device) {
+		set_bit(handle, ioc->pd_handles);
+		if (sas_device->starget && sas_device->starget->hostdata) {
+			starget = sas_device->starget;
+			sas_target_priv_data = starget->hostdata;
+			sas_target_priv_data->flags |=
+			    MPT_TARGET_FLAGS_RAID_COMPONENT;
+			sas_device->volume_handle = volume_handle;
+			sas_device->volume_wwid = volume_wwid;
+		}
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (!sas_device)
+		return;
+
+	/* hiding raid component */
+	_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+
+	if (starget)
+		starget_for_each_device(starget, (void *)1, _scsih_reprobe_lun);
+
+	sas_device_put(sas_device);
+}
+
+/**
+ * _scsih_sas_pd_delete - delete pd component
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ */
+static void
+_scsih_sas_pd_delete(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+
+	_scsih_device_remove_by_handle(ioc, handle);
+}
+
+/**
+ * _scsih_sas_pd_add - remove pd component
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ */
+static void
+_scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _sas_device *sas_device;
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
+	u64 sas_address;
+	u16 parent_handle;
+
+	set_bit(handle, ioc->pd_handles);
+
+	sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (sas_device) {
+		_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+		sas_device_put(sas_device);
+		return;
+	}
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+	if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
+		mpt3sas_transport_update_links(ioc, sas_address, handle,
+		    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+	_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+	_scsih_add_device(ioc, handle, 0, 1);
+}
+
+/**
+ * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_config_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrConfigChangeList_t *event_data)
+{
+	Mpi2EventIrConfigElement_t *element;
+	u8 element_type;
+	int i;
+	char *reason_str = NULL, *element_str = NULL;
+
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+
+	pr_info(MPT3SAS_FMT "raid config change: (%s), elements(%d)\n",
+	    ioc->name, (le32_to_cpu(event_data->Flags) &
+	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ?
+	    "foreign" : "native", event_data->NumElements);
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		switch (element->ReasonCode) {
+		case MPI2_EVENT_IR_CHANGE_RC_ADDED:
+			reason_str = "add";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
+			reason_str = "remove";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE:
+			reason_str = "no change";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_HIDE:
+			reason_str = "hide";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
+			reason_str = "unhide";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
+			reason_str = "volume_created";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
+			reason_str = "volume_deleted";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
+			reason_str = "pd_created";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
+			reason_str = "pd_deleted";
+			break;
+		default:
+			reason_str = "unknown reason";
+			break;
+		}
+		element_type = le16_to_cpu(element->ElementFlags) &
+		    MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK;
+		switch (element_type) {
+		case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT:
+			element_str = "volume";
+			break;
+		case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT:
+			element_str = "phys disk";
+			break;
+		case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT:
+			element_str = "hot spare";
+			break;
+		default:
+			element_str = "unknown element";
+			break;
+		}
+		pr_info("\t(%s:%s), vol handle(0x%04x), " \
+		    "pd handle(0x%04x), pd num(0x%02x)\n", element_str,
+		    reason_str, le16_to_cpu(element->VolDevHandle),
+		    le16_to_cpu(element->PhysDiskDevHandle),
+		    element->PhysDiskNum);
+	}
+}
+
+/**
+ * _scsih_sas_ir_config_change_event - handle ir configuration change events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi2EventIrConfigElement_t *element;
+	int i;
+	u8 foreign_config;
+	Mpi2EventDataIrConfigChangeList_t *event_data =
+		(Mpi2EventDataIrConfigChangeList_t *)
+		fw_event->event_data;
+
+	if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
+	     (!ioc->hide_ir_msg))
+		_scsih_sas_ir_config_change_event_debug(ioc, event_data);
+
+	foreign_config = (le32_to_cpu(event_data->Flags) &
+	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
+
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	if (ioc->shost_recovery &&
+	    ioc->hba_mpi_version_belonged != MPI2_VERSION) {
+		for (i = 0; i < event_data->NumElements; i++, element++) {
+			if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_HIDE)
+				_scsih_ir_fastpath(ioc,
+					le16_to_cpu(element->PhysDiskDevHandle),
+					element->PhysDiskNum);
+		}
+		return;
+	}
+
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+
+		switch (element->ReasonCode) {
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
+		case MPI2_EVENT_IR_CHANGE_RC_ADDED:
+			if (!foreign_config)
+				_scsih_sas_volume_add(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
+		case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
+			if (!foreign_config)
+				_scsih_sas_volume_delete(ioc,
+				    le16_to_cpu(element->VolDevHandle));
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_hide(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_expose(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_HIDE:
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_add(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_delete(ioc, element);
+			break;
+		}
+	}
+}
+
+/**
+ * _scsih_sas_ir_volume_event - IR volume event
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	u64 wwid;
+	unsigned long flags;
+	struct _raid_device *raid_device;
+	u16 handle;
+	u32 state;
+	int rc;
+	Mpi2EventDataIrVolume_t *event_data =
+		(Mpi2EventDataIrVolume_t *) fw_event->event_data;
+
+	if (ioc->shost_recovery)
+		return;
+
+	if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
+		return;
+
+	handle = le16_to_cpu(event_data->VolDevHandle);
+	state = le32_to_cpu(event_data->NewValue);
+	if (!ioc->hide_ir_msg)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
+		    ioc->name, __func__,  handle,
+		    le32_to_cpu(event_data->PreviousValue), state));
+	switch (state) {
+	case MPI2_RAID_VOL_STATE_MISSING:
+	case MPI2_RAID_VOL_STATE_FAILED:
+		_scsih_sas_volume_delete(ioc, handle);
+		break;
+
+	case MPI2_RAID_VOL_STATE_ONLINE:
+	case MPI2_RAID_VOL_STATE_DEGRADED:
+	case MPI2_RAID_VOL_STATE_OPTIMAL:
+
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+		if (raid_device)
+			break;
+
+		mpt3sas_config_get_volume_wwid(ioc, handle, &wwid);
+		if (!wwid) {
+			pr_err(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name,
+			    __FILE__, __LINE__, __func__);
+			break;
+		}
+
+		raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
+		if (!raid_device) {
+			pr_err(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name,
+			    __FILE__, __LINE__, __func__);
+			break;
+		}
+
+		raid_device->id = ioc->sas_id++;
+		raid_device->channel = RAID_CHANNEL;
+		raid_device->handle = handle;
+		raid_device->wwid = wwid;
+		_scsih_raid_device_add(ioc, raid_device);
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+		break;
+
+	case MPI2_RAID_VOL_STATE_INITIALIZING:
+	default:
+		break;
+	}
+}
+
+/**
+ * _scsih_sas_ir_physical_disk_event - PD event
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	u16 handle, parent_handle;
+	u32 state;
+	struct _sas_device *sas_device;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
+	Mpi2EventDataIrPhysicalDisk_t *event_data =
+		(Mpi2EventDataIrPhysicalDisk_t *) fw_event->event_data;
+	u64 sas_address;
+
+	if (ioc->shost_recovery)
+		return;
+
+	if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
+		return;
+
+	handle = le16_to_cpu(event_data->PhysDiskDevHandle);
+	state = le32_to_cpu(event_data->NewValue);
+
+	if (!ioc->hide_ir_msg)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
+		    ioc->name, __func__,  handle,
+		    le32_to_cpu(event_data->PreviousValue), state));
+
+	switch (state) {
+	case MPI2_RAID_PD_STATE_ONLINE:
+	case MPI2_RAID_PD_STATE_DEGRADED:
+	case MPI2_RAID_PD_STATE_REBUILDING:
+	case MPI2_RAID_PD_STATE_OPTIMAL:
+	case MPI2_RAID_PD_STATE_HOT_SPARE:
+
+		if (!ioc->is_warpdrive)
+			set_bit(handle, ioc->pd_handles);
+
+		sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+		if (sas_device) {
+			sas_device_put(sas_device);
+			return;
+		}
+
+		if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    handle))) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
+			mpt3sas_transport_update_links(ioc, sas_address, handle,
+			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+		_scsih_add_device(ioc, handle, 0, 1);
+
+		break;
+
+	case MPI2_RAID_PD_STATE_OFFLINE:
+	case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
+	case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
+	default:
+		break;
+	}
+}
+
+/**
+ * _scsih_sas_ir_operation_status_event_debug - debug for IR op event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_operation_status_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrOperationStatus_t *event_data)
+{
+	char *reason_str = NULL;
+
+	switch (event_data->RAIDOperation) {
+	case MPI2_EVENT_IR_RAIDOP_RESYNC:
+		reason_str = "resync";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION:
+		reason_str = "online capacity expansion";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK:
+		reason_str = "consistency check";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT:
+		reason_str = "background init";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT:
+		reason_str = "make data consistent";
+		break;
+	}
+
+	if (!reason_str)
+		return;
+
+	pr_info(MPT3SAS_FMT "raid operational status: (%s)" \
+	    "\thandle(0x%04x), percent complete(%d)\n",
+	    ioc->name, reason_str,
+	    le16_to_cpu(event_data->VolDevHandle),
+	    event_data->PercentComplete);
+}
+
+/**
+ * _scsih_sas_ir_operation_status_event - handle RAID operation events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi2EventDataIrOperationStatus_t *event_data =
+		(Mpi2EventDataIrOperationStatus_t *)
+		fw_event->event_data;
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	u16 handle;
+
+	if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
+	    (!ioc->hide_ir_msg))
+		_scsih_sas_ir_operation_status_event_debug(ioc,
+		     event_data);
+
+	/* code added for raid transport support */
+	if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
+
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		handle = le16_to_cpu(event_data->VolDevHandle);
+		raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+		if (raid_device)
+			raid_device->percent_complete =
+			    event_data->PercentComplete;
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+}
+
+/**
+ * _scsih_prep_device_scan - initialize parameters prior to device scan
+ * @ioc: per adapter object
+ *
+ * Set the deleted flag prior to device scan.  If the device is found during
+ * the scan, then we clear the deleted flag.
+ */
+static void
+_scsih_prep_device_scan(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (sas_device_priv_data && sas_device_priv_data->sas_target)
+			sas_device_priv_data->sas_target->deleted = 1;
+	}
+}
+
+/**
+ * _scsih_mark_responding_sas_device - mark a sas_devices as responding
+ * @ioc: per adapter object
+ * @sas_device_pg0: SAS Device page 0
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponsive_sas_devices.
+ */
+static void
+_scsih_mark_responding_sas_device(struct MPT3SAS_ADAPTER *ioc,
+Mpi2SasDevicePage0_t *sas_device_pg0)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
+	struct scsi_target *starget;
+	struct _sas_device *sas_device = NULL;
+	struct _enclosure_node *enclosure_dev = NULL;
+	unsigned long flags;
+
+	if (sas_device_pg0->EnclosureHandle) {
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+				le16_to_cpu(sas_device_pg0->EnclosureHandle));
+		if (enclosure_dev == NULL)
+			pr_info(MPT3SAS_FMT "Enclosure handle(0x%04x)"
+			    "doesn't match with enclosure device!\n",
+			    ioc->name, sas_device_pg0->EnclosureHandle);
+	}
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+		if ((sas_device->sas_address == le64_to_cpu(
+		    sas_device_pg0->SASAddress)) && (sas_device->slot ==
+		    le16_to_cpu(sas_device_pg0->Slot))) {
+			sas_device->responding = 1;
+			starget = sas_device->starget;
+			if (starget && starget->hostdata) {
+				sas_target_priv_data = starget->hostdata;
+				sas_target_priv_data->tm_busy = 0;
+				sas_target_priv_data->deleted = 0;
+			} else
+				sas_target_priv_data = NULL;
+			if (starget) {
+				starget_printk(KERN_INFO, starget,
+				    "handle(0x%04x), sas_addr(0x%016llx)\n",
+				    le16_to_cpu(sas_device_pg0->DevHandle),
+				    (unsigned long long)
+				    sas_device->sas_address);
+
+				if (sas_device->enclosure_handle != 0)
+					starget_printk(KERN_INFO, starget,
+					 "enclosure logical id(0x%016llx),"
+					 " slot(%d)\n",
+					 (unsigned long long)
+					 sas_device->enclosure_logical_id,
+					 sas_device->slot);
+			}
+			if (le16_to_cpu(sas_device_pg0->Flags) &
+			      MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
+				sas_device->enclosure_level =
+				   sas_device_pg0->EnclosureLevel;
+				memcpy(&sas_device->connector_name[0],
+					&sas_device_pg0->ConnectorName[0], 4);
+			} else {
+				sas_device->enclosure_level = 0;
+				sas_device->connector_name[0] = '\0';
+			}
+
+			sas_device->enclosure_handle =
+				le16_to_cpu(sas_device_pg0->EnclosureHandle);
+			sas_device->is_chassis_slot_valid = 0;
+			if (enclosure_dev) {
+				sas_device->enclosure_logical_id = le64_to_cpu(
+					enclosure_dev->pg0.EnclosureLogicalID);
+				if (le16_to_cpu(enclosure_dev->pg0.Flags) &
+				    MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID) {
+					sas_device->is_chassis_slot_valid = 1;
+					sas_device->chassis_slot =
+						enclosure_dev->pg0.ChassisSlot;
+				}
+			}
+
+			if (sas_device->handle == le16_to_cpu(
+			    sas_device_pg0->DevHandle))
+				goto out;
+			pr_info("\thandle changed from(0x%04x)!!!\n",
+			    sas_device->handle);
+			sas_device->handle = le16_to_cpu(
+			    sas_device_pg0->DevHandle);
+			if (sas_target_priv_data)
+				sas_target_priv_data->handle =
+				    le16_to_cpu(sas_device_pg0->DevHandle);
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_create_enclosure_list_after_reset - Free Existing list,
+ *	And create enclosure list by scanning all Enclosure Page(0)s
+ * @ioc: per adapter object
+ */
+static void
+_scsih_create_enclosure_list_after_reset(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _enclosure_node *enclosure_dev;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 enclosure_handle;
+	int rc;
+
+	/* Free existing enclosure list */
+	mpt3sas_free_enclosure_list(ioc);
+
+	/* Re constructing enclosure list after reset*/
+	enclosure_handle = 0xFFFF;
+	do {
+		enclosure_dev =
+			kzalloc(sizeof(struct _enclosure_node), GFP_KERNEL);
+		if (!enclosure_dev) {
+			pr_err(MPT3SAS_FMT
+				"failure at %s:%d/%s()!\n", ioc->name,
+				__FILE__, __LINE__, __func__);
+			return;
+		}
+		rc = mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+				&enclosure_dev->pg0,
+				MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE,
+				enclosure_handle);
+
+		if (rc || (le16_to_cpu(mpi_reply.IOCStatus) &
+						MPI2_IOCSTATUS_MASK)) {
+			kfree(enclosure_dev);
+			return;
+		}
+		list_add_tail(&enclosure_dev->list,
+						&ioc->enclosure_list);
+		enclosure_handle =
+			le16_to_cpu(enclosure_dev->pg0.EnclosureHandle);
+	} while (1);
+}
+
+/**
+ * _scsih_search_responding_sas_devices -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ */
+static void
+_scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 handle;
+	u32 device_info;
+
+	pr_info(MPT3SAS_FMT "search for end-devices: start\n", ioc->name);
+
+	if (list_empty(&ioc->sas_device_list))
+		goto out;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+	    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+	    handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+			break;
+		handle = le16_to_cpu(sas_device_pg0.DevHandle);
+		device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+		if (!(_scsih_is_end_device(device_info)))
+			continue;
+		_scsih_mark_responding_sas_device(ioc, &sas_device_pg0);
+	}
+
+ out:
+	pr_info(MPT3SAS_FMT "search for end-devices: complete\n",
+	    ioc->name);
+}
+
+/**
+ * _scsih_mark_responding_pcie_device - mark a pcie_device as responding
+ * @ioc: per adapter object
+ * @pcie_device_pg0: PCIe Device page 0
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponding_devices.
+ */
+static void
+_scsih_mark_responding_pcie_device(struct MPT3SAS_ADAPTER *ioc,
+	Mpi26PCIeDevicePage0_t *pcie_device_pg0)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
+	struct scsi_target *starget;
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list) {
+		if ((pcie_device->wwid == le64_to_cpu(pcie_device_pg0->WWID))
+		    && (pcie_device->slot == le16_to_cpu(
+		    pcie_device_pg0->Slot))) {
+			pcie_device->responding = 1;
+			starget = pcie_device->starget;
+			if (starget && starget->hostdata) {
+				sas_target_priv_data = starget->hostdata;
+				sas_target_priv_data->tm_busy = 0;
+				sas_target_priv_data->deleted = 0;
+			} else
+				sas_target_priv_data = NULL;
+			if (starget) {
+				starget_printk(KERN_INFO, starget,
+				    "handle(0x%04x), wwid(0x%016llx) ",
+				    pcie_device->handle,
+				    (unsigned long long)pcie_device->wwid);
+				if (pcie_device->enclosure_handle != 0)
+					starget_printk(KERN_INFO, starget,
+					    "enclosure logical id(0x%016llx), "
+					    "slot(%d)\n",
+					    (unsigned long long)
+					    pcie_device->enclosure_logical_id,
+					    pcie_device->slot);
+			}
+
+			if (((le32_to_cpu(pcie_device_pg0->Flags)) &
+			    MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID) &&
+			    (ioc->hba_mpi_version_belonged != MPI2_VERSION)) {
+				pcie_device->enclosure_level =
+				    pcie_device_pg0->EnclosureLevel;
+				memcpy(&pcie_device->connector_name[0],
+				    &pcie_device_pg0->ConnectorName[0], 4);
+			} else {
+				pcie_device->enclosure_level = 0;
+				pcie_device->connector_name[0] = '\0';
+			}
+
+			if (pcie_device->handle == le16_to_cpu(
+			    pcie_device_pg0->DevHandle))
+				goto out;
+			pr_info("\thandle changed from(0x%04x)!!!\n",
+			    pcie_device->handle);
+			pcie_device->handle = le16_to_cpu(
+			    pcie_device_pg0->DevHandle);
+			if (sas_target_priv_data)
+				sas_target_priv_data->handle =
+				    le16_to_cpu(pcie_device_pg0->DevHandle);
+			goto out;
+		}
+	}
+
+ out:
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_pcie_devices -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ */
+static void
+_scsih_search_responding_pcie_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi26PCIeDevicePage0_t pcie_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 handle;
+	u32 device_info;
+
+	pr_info(MPT3SAS_FMT "search for end-devices: start\n", ioc->name);
+
+	if (list_empty(&ioc->pcie_device_list))
+		goto out;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+		&pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+		handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from %s: "
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n", ioc->name,
+			    __func__, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(pcie_device_pg0.DevHandle);
+		device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
+		if (!(_scsih_is_nvme_device(device_info)))
+			continue;
+		_scsih_mark_responding_pcie_device(ioc, &pcie_device_pg0);
+	}
+out:
+	pr_info(MPT3SAS_FMT "search for PCIe end-devices: complete\n",
+	    ioc->name);
+}
+
+/**
+ * _scsih_mark_responding_raid_device - mark a raid_device as responding
+ * @ioc: per adapter object
+ * @wwid: world wide identifier for raid volume
+ * @handle: device handle
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponsive_raid_devices.
+ */
+static void
+_scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
+	u16 handle)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
+	struct scsi_target *starget;
+	struct _raid_device *raid_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->wwid == wwid && raid_device->starget) {
+			starget = raid_device->starget;
+			if (starget && starget->hostdata) {
+				sas_target_priv_data = starget->hostdata;
+				sas_target_priv_data->deleted = 0;
+			} else
+				sas_target_priv_data = NULL;
+			raid_device->responding = 1;
+			spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+			starget_printk(KERN_INFO, raid_device->starget,
+			    "handle(0x%04x), wwid(0x%016llx)\n", handle,
+			    (unsigned long long)raid_device->wwid);
+
+			/*
+			 * WARPDRIVE: The handles of the PDs might have changed
+			 * across the host reset so re-initialize the
+			 * required data for Direct IO
+			 */
+			mpt3sas_init_warpdrive_properties(ioc, raid_device);
+			spin_lock_irqsave(&ioc->raid_device_lock, flags);
+			if (raid_device->handle == handle) {
+				spin_unlock_irqrestore(&ioc->raid_device_lock,
+				    flags);
+				return;
+			}
+			pr_info("\thandle changed from(0x%04x)!!!\n",
+			    raid_device->handle);
+			raid_device->handle = handle;
+			if (sas_target_priv_data)
+				sas_target_priv_data->handle = handle;
+			spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_raid_devices -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ */
+static void
+_scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidVolPage1_t volume_pg1;
+	Mpi2RaidVolPage0_t volume_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 handle;
+	u8 phys_disk_num;
+
+	if (!ioc->ir_firmware)
+		return;
+
+	pr_info(MPT3SAS_FMT "search for raid volumes: start\n",
+	    ioc->name);
+
+	if (list_empty(&ioc->raid_device_list))
+		goto out;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+			break;
+		handle = le16_to_cpu(volume_pg1.DevHandle);
+
+		if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
+		    &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+		     sizeof(Mpi2RaidVolPage0_t)))
+			continue;
+
+		if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED)
+			_scsih_mark_responding_raid_device(ioc,
+			    le64_to_cpu(volume_pg1.WWID), handle);
+	}
+
+	/* refresh the pd_handles */
+	if (!ioc->is_warpdrive) {
+		phys_disk_num = 0xFF;
+		memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
+		while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+		    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
+		    phys_disk_num))) {
+			ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+			    MPI2_IOCSTATUS_MASK;
+			if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+				break;
+			phys_disk_num = pd_pg0.PhysDiskNum;
+			handle = le16_to_cpu(pd_pg0.DevHandle);
+			set_bit(handle, ioc->pd_handles);
+		}
+	}
+ out:
+	pr_info(MPT3SAS_FMT "search for responding raid volumes: complete\n",
+		ioc->name);
+}
+
+/**
+ * _scsih_mark_responding_expander - mark a expander as responding
+ * @ioc: per adapter object
+ * @expander_pg0:SAS Expander Config Page0
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponsive_expanders.
+ */
+static void
+_scsih_mark_responding_expander(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ExpanderPage0_t *expander_pg0)
+{
+	struct _sas_node *sas_expander = NULL;
+	unsigned long flags;
+	int i;
+	struct _enclosure_node *enclosure_dev = NULL;
+	u16 handle = le16_to_cpu(expander_pg0->DevHandle);
+	u16 enclosure_handle = le16_to_cpu(expander_pg0->EnclosureHandle);
+	u64 sas_address = le64_to_cpu(expander_pg0->SASAddress);
+
+	if (enclosure_handle)
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+							enclosure_handle);
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+		if (sas_expander->sas_address != sas_address)
+			continue;
+		sas_expander->responding = 1;
+
+		if (enclosure_dev) {
+			sas_expander->enclosure_logical_id =
+			    le64_to_cpu(enclosure_dev->pg0.EnclosureLogicalID);
+			sas_expander->enclosure_handle =
+			    le16_to_cpu(expander_pg0->EnclosureHandle);
+		}
+
+		if (sas_expander->handle == handle)
+			goto out;
+		pr_info("\texpander(0x%016llx): handle changed" \
+		    " from(0x%04x) to (0x%04x)!!!\n",
+		    (unsigned long long)sas_expander->sas_address,
+		    sas_expander->handle, handle);
+		sas_expander->handle = handle;
+		for (i = 0 ; i < sas_expander->num_phys ; i++)
+			sas_expander->phy[i].handle = handle;
+		goto out;
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_expanders -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ */
+static void
+_scsih_search_responding_expanders(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2ExpanderPage0_t expander_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u64 sas_address;
+	u16 handle;
+
+	pr_info(MPT3SAS_FMT "search for expanders: start\n", ioc->name);
+
+	if (list_empty(&ioc->sas_expander_list))
+		goto out;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+	    MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
+
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+			break;
+
+		handle = le16_to_cpu(expander_pg0.DevHandle);
+		sas_address = le64_to_cpu(expander_pg0.SASAddress);
+		pr_info("\texpander present: handle(0x%04x), sas_addr(0x%016llx)\n",
+			handle,
+		    (unsigned long long)sas_address);
+		_scsih_mark_responding_expander(ioc, &expander_pg0);
+	}
+
+ out:
+	pr_info(MPT3SAS_FMT "search for expanders: complete\n", ioc->name);
+}
+
+/**
+ * _scsih_remove_unresponding_devices - removing unresponding devices
+ * @ioc: per adapter object
+ */
+static void
+_scsih_remove_unresponding_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _sas_device *sas_device, *sas_device_next;
+	struct _sas_node *sas_expander, *sas_expander_next;
+	struct _raid_device *raid_device, *raid_device_next;
+	struct _pcie_device *pcie_device, *pcie_device_next;
+	struct list_head tmp_list;
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	pr_info(MPT3SAS_FMT "removing unresponding devices: start\n",
+	    ioc->name);
+
+	/* removing unresponding end devices */
+	pr_info(MPT3SAS_FMT "removing unresponding devices: end-devices\n",
+	    ioc->name);
+	/*
+	 * Iterate, pulling off devices marked as non-responding. We become the
+	 * owner for the reference the list had on any object we prune.
+	 */
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	list_for_each_entry_safe(sas_device, sas_device_next,
+	    &ioc->sas_device_list, list) {
+		if (!sas_device->responding)
+			list_move_tail(&sas_device->list, &head);
+		else
+			sas_device->responding = 0;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	/*
+	 * Now, uninitialize and remove the unresponding devices we pruned.
+	 */
+	list_for_each_entry_safe(sas_device, sas_device_next, &head, list) {
+		_scsih_remove_device(ioc, sas_device);
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+
+	pr_info(MPT3SAS_FMT
+		" Removing unresponding devices: pcie end-devices\n"
+		, ioc->name);
+	INIT_LIST_HEAD(&head);
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	list_for_each_entry_safe(pcie_device, pcie_device_next,
+	    &ioc->pcie_device_list, list) {
+		if (!pcie_device->responding)
+			list_move_tail(&pcie_device->list, &head);
+		else
+			pcie_device->responding = 0;
+	}
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	list_for_each_entry_safe(pcie_device, pcie_device_next, &head, list) {
+		_scsih_pcie_device_remove_from_sml(ioc, pcie_device);
+		list_del_init(&pcie_device->list);
+		pcie_device_put(pcie_device);
+	}
+
+	/* removing unresponding volumes */
+	if (ioc->ir_firmware) {
+		pr_info(MPT3SAS_FMT "removing unresponding devices: volumes\n",
+			ioc->name);
+		list_for_each_entry_safe(raid_device, raid_device_next,
+		    &ioc->raid_device_list, list) {
+			if (!raid_device->responding)
+				_scsih_sas_volume_delete(ioc,
+				    raid_device->handle);
+			else
+				raid_device->responding = 0;
+		}
+	}
+
+	/* removing unresponding expanders */
+	pr_info(MPT3SAS_FMT "removing unresponding devices: expanders\n",
+	    ioc->name);
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	INIT_LIST_HEAD(&tmp_list);
+	list_for_each_entry_safe(sas_expander, sas_expander_next,
+	    &ioc->sas_expander_list, list) {
+		if (!sas_expander->responding)
+			list_move_tail(&sas_expander->list, &tmp_list);
+		else
+			sas_expander->responding = 0;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+	list_for_each_entry_safe(sas_expander, sas_expander_next, &tmp_list,
+	    list) {
+		_scsih_expander_node_remove(ioc, sas_expander);
+	}
+
+	pr_info(MPT3SAS_FMT "removing unresponding devices: complete\n",
+	    ioc->name);
+
+	/* unblock devices */
+	_scsih_ublock_io_all_device(ioc);
+}
+
+static void
+_scsih_refresh_expander_links(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander, u16 handle)
+{
+	Mpi2ExpanderPage1_t expander_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	int i;
+
+	for (i = 0 ; i < sas_expander->num_phys ; i++) {
+		if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply,
+		    &expander_pg1, i, handle))) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		mpt3sas_transport_update_links(ioc, sas_expander->sas_address,
+		    le16_to_cpu(expander_pg1.AttachedDevHandle), i,
+		    expander_pg1.NegotiatedLinkRate >> 4);
+	}
+}
+
+/**
+ * _scsih_scan_for_devices_after_reset - scan for devices after host reset
+ * @ioc: per adapter object
+ */
+static void
+_scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2ExpanderPage0_t expander_pg0;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi26PCIeDevicePage0_t pcie_device_pg0;
+	Mpi2RaidVolPage1_t volume_pg1;
+	Mpi2RaidVolPage0_t volume_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2EventIrConfigElement_t element;
+	Mpi2ConfigReply_t mpi_reply;
+	u8 phys_disk_num;
+	u16 ioc_status;
+	u16 handle, parent_handle;
+	u64 sas_address;
+	struct _sas_device *sas_device;
+	struct _pcie_device *pcie_device;
+	struct _sas_node *expander_device;
+	static struct _raid_device *raid_device;
+	u8 retry_count;
+	unsigned long flags;
+
+	pr_info(MPT3SAS_FMT "scan devices: start\n", ioc->name);
+
+	_scsih_sas_host_refresh(ioc);
+
+	pr_info(MPT3SAS_FMT "\tscan devices: expanders start\n", ioc->name);
+
+	/* expanders */
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+	    MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from expander scan: " \
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(expander_pg0.DevHandle);
+		spin_lock_irqsave(&ioc->sas_node_lock, flags);
+		expander_device = mpt3sas_scsih_expander_find_by_sas_address(
+		    ioc, le64_to_cpu(expander_pg0.SASAddress));
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		if (expander_device)
+			_scsih_refresh_expander_links(ioc, expander_device,
+			    handle);
+		else {
+			pr_info(MPT3SAS_FMT "\tBEFORE adding expander: " \
+			    "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
+			    handle, (unsigned long long)
+			    le64_to_cpu(expander_pg0.SASAddress));
+			_scsih_expander_add(ioc, handle);
+			pr_info(MPT3SAS_FMT "\tAFTER adding expander: " \
+			    "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
+			    handle, (unsigned long long)
+			    le64_to_cpu(expander_pg0.SASAddress));
+		}
+	}
+
+	pr_info(MPT3SAS_FMT "\tscan devices: expanders complete\n",
+	    ioc->name);
+
+	if (!ioc->ir_firmware)
+		goto skip_to_sas;
+
+	pr_info(MPT3SAS_FMT "\tscan devices: phys disk start\n", ioc->name);
+
+	/* phys disk */
+	phys_disk_num = 0xFF;
+	while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+	    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
+	    phys_disk_num))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from phys disk scan: "\
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		phys_disk_num = pd_pg0.PhysDiskNum;
+		handle = le16_to_cpu(pd_pg0.DevHandle);
+		sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+		if (sas_device) {
+			sas_device_put(sas_device);
+			continue;
+		}
+		if (mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    handle) != 0)
+			continue;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from phys disk scan " \
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+		if (!_scsih_get_sas_address(ioc, parent_handle,
+		    &sas_address)) {
+			pr_info(MPT3SAS_FMT "\tBEFORE adding phys disk: " \
+			    " handle (0x%04x), sas_addr(0x%016llx)\n",
+			    ioc->name, handle, (unsigned long long)
+			    le64_to_cpu(sas_device_pg0.SASAddress));
+			mpt3sas_transport_update_links(ioc, sas_address,
+			    handle, sas_device_pg0.PhyNum,
+			    MPI2_SAS_NEG_LINK_RATE_1_5);
+			set_bit(handle, ioc->pd_handles);
+			retry_count = 0;
+			/* This will retry adding the end device.
+			 * _scsih_add_device() will decide on retries and
+			 * return "1" when it should be retried
+			 */
+			while (_scsih_add_device(ioc, handle, retry_count++,
+			    1)) {
+				ssleep(1);
+			}
+			pr_info(MPT3SAS_FMT "\tAFTER adding phys disk: " \
+			    " handle (0x%04x), sas_addr(0x%016llx)\n",
+			    ioc->name, handle, (unsigned long long)
+			    le64_to_cpu(sas_device_pg0.SASAddress));
+		}
+	}
+
+	pr_info(MPT3SAS_FMT "\tscan devices: phys disk complete\n",
+	    ioc->name);
+
+	pr_info(MPT3SAS_FMT "\tscan devices: volumes start\n", ioc->name);
+
+	/* volumes */
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(volume_pg1.DevHandle);
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_wwid(ioc,
+		    le64_to_cpu(volume_pg1.WWID));
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		if (raid_device)
+			continue;
+		if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
+		    &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+		     sizeof(Mpi2RaidVolPage0_t)))
+			continue;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
+			memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
+			element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
+			element.VolDevHandle = volume_pg1.DevHandle;
+			pr_info(MPT3SAS_FMT
+				"\tBEFORE adding volume: handle (0x%04x)\n",
+				ioc->name, volume_pg1.DevHandle);
+			_scsih_sas_volume_add(ioc, &element);
+			pr_info(MPT3SAS_FMT
+				"\tAFTER adding volume: handle (0x%04x)\n",
+				ioc->name, volume_pg1.DevHandle);
+		}
+	}
+
+	pr_info(MPT3SAS_FMT "\tscan devices: volumes complete\n",
+	    ioc->name);
+
+ skip_to_sas:
+
+	pr_info(MPT3SAS_FMT "\tscan devices: end devices start\n",
+	    ioc->name);
+
+	/* sas devices */
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+	    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+	    handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from end device scan:"\
+			    " ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(sas_device_pg0.DevHandle);
+		if (!(_scsih_is_end_device(
+		    le32_to_cpu(sas_device_pg0.DeviceInfo))))
+			continue;
+		sas_device = mpt3sas_get_sdev_by_addr(ioc,
+		    le64_to_cpu(sas_device_pg0.SASAddress));
+		if (sas_device) {
+			sas_device_put(sas_device);
+			continue;
+		}
+		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
+			pr_info(MPT3SAS_FMT "\tBEFORE adding end device: " \
+			    "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
+			    handle, (unsigned long long)
+			    le64_to_cpu(sas_device_pg0.SASAddress));
+			mpt3sas_transport_update_links(ioc, sas_address, handle,
+			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+			retry_count = 0;
+			/* This will retry adding the end device.
+			 * _scsih_add_device() will decide on retries and
+			 * return "1" when it should be retried
+			 */
+			while (_scsih_add_device(ioc, handle, retry_count++,
+			    0)) {
+				ssleep(1);
+			}
+			pr_info(MPT3SAS_FMT "\tAFTER adding end device: " \
+			    "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
+			    handle, (unsigned long long)
+			    le64_to_cpu(sas_device_pg0.SASAddress));
+		}
+	}
+	pr_info(MPT3SAS_FMT "\tscan devices: end devices complete\n",
+	    ioc->name);
+	pr_info(MPT3SAS_FMT "\tscan devices: pcie end devices start\n",
+	    ioc->name);
+
+	/* pcie devices */
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+		&pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+		handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus)
+				& MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from pcie end device"
+				" scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
+				ioc->name, ioc_status,
+				le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(pcie_device_pg0.DevHandle);
+		if (!(_scsih_is_nvme_device(
+			le32_to_cpu(pcie_device_pg0.DeviceInfo))))
+			continue;
+		pcie_device = mpt3sas_get_pdev_by_wwid(ioc,
+				le64_to_cpu(pcie_device_pg0.WWID));
+		if (pcie_device) {
+			pcie_device_put(pcie_device);
+			continue;
+		}
+		retry_count = 0;
+		parent_handle = le16_to_cpu(pcie_device_pg0.ParentDevHandle);
+		_scsih_pcie_add_device(ioc, handle);
+
+		pr_info(MPT3SAS_FMT "\tAFTER adding pcie end device: "
+			"handle (0x%04x), wwid(0x%016llx)\n", ioc->name,
+			handle,
+			(unsigned long long) le64_to_cpu(pcie_device_pg0.WWID));
+	}
+	pr_info(MPT3SAS_FMT "\tpcie devices: pcie end devices complete\n",
+		ioc->name);
+	pr_info(MPT3SAS_FMT "scan devices: complete\n", ioc->name);
+}
+
+/**
+ * mpt3sas_scsih_reset_handler - reset callback handler (for scsih)
+ * @ioc: per adapter object
+ *
+ * The handler for doing any required cleanup or initialization.
+ */
+void mpt3sas_scsih_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__));
+}
+
+/**
+ * mpt3sas_scsih_after_reset_handler - reset callback handler (for scsih)
+ * @ioc: per adapter object
+ *
+ * The handler for doing any required cleanup or initialization.
+ */
+void
+mpt3sas_scsih_after_reset_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__));
+	if (ioc->scsih_cmds.status & MPT3_CMD_PENDING) {
+		ioc->scsih_cmds.status |= MPT3_CMD_RESET;
+		mpt3sas_base_free_smid(ioc, ioc->scsih_cmds.smid);
+		complete(&ioc->scsih_cmds.done);
+	}
+	if (ioc->tm_cmds.status & MPT3_CMD_PENDING) {
+		ioc->tm_cmds.status |= MPT3_CMD_RESET;
+		mpt3sas_base_free_smid(ioc, ioc->tm_cmds.smid);
+		complete(&ioc->tm_cmds.done);
+	}
+
+	memset(ioc->pend_os_device_add, 0, ioc->pend_os_device_add_sz);
+	memset(ioc->device_remove_in_progress, 0,
+	       ioc->device_remove_in_progress_sz);
+	_scsih_fw_event_cleanup_queue(ioc);
+	_scsih_flush_running_cmds(ioc);
+}
+
+/**
+ * mpt3sas_scsih_reset_handler - reset callback handler (for scsih)
+ * @ioc: per adapter object
+ *
+ * The handler for doing any required cleanup or initialization.
+ */
+void
+mpt3sas_scsih_reset_done_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__));
+	if ((!ioc->is_driver_loading) && !(disable_discovery > 0 &&
+					   !ioc->sas_hba.num_phys)) {
+		_scsih_prep_device_scan(ioc);
+		_scsih_create_enclosure_list_after_reset(ioc);
+		_scsih_search_responding_sas_devices(ioc);
+		_scsih_search_responding_pcie_devices(ioc);
+		_scsih_search_responding_raid_devices(ioc);
+		_scsih_search_responding_expanders(ioc);
+		_scsih_error_recovery_delete_devices(ioc);
+	}
+}
+
+/**
+ * _mpt3sas_fw_work - delayed task for processing firmware events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+	_scsih_fw_event_del_from_list(ioc, fw_event);
+
+	/* the queue is being flushed so ignore this event */
+	if (ioc->remove_host || ioc->pci_error_recovery) {
+		fw_event_work_put(fw_event);
+		return;
+	}
+
+	switch (fw_event->event) {
+	case MPT3SAS_PROCESS_TRIGGER_DIAG:
+		mpt3sas_process_trigger_data(ioc,
+			(struct SL_WH_TRIGGERS_EVENT_DATA_T *)
+			fw_event->event_data);
+		break;
+	case MPT3SAS_REMOVE_UNRESPONDING_DEVICES:
+		while (scsi_host_in_recovery(ioc->shost) ||
+					 ioc->shost_recovery) {
+			/*
+			 * If we're unloading, bail. Otherwise, this can become
+			 * an infinite loop.
+			 */
+			if (ioc->remove_host)
+				goto out;
+			ssleep(1);
+		}
+		_scsih_remove_unresponding_devices(ioc);
+		_scsih_scan_for_devices_after_reset(ioc);
+		break;
+	case MPT3SAS_PORT_ENABLE_COMPLETE:
+		ioc->start_scan = 0;
+		if (missing_delay[0] != -1 && missing_delay[1] != -1)
+			mpt3sas_base_update_missing_delay(ioc, missing_delay[0],
+			    missing_delay[1]);
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"port enable: complete from worker thread\n",
+			ioc->name));
+		break;
+	case MPT3SAS_TURN_ON_PFA_LED:
+		_scsih_turn_on_pfa_led(ioc, fw_event->device_handle);
+		break;
+	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+		_scsih_sas_topology_change_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+		_scsih_sas_device_status_change_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_DISCOVERY:
+		_scsih_sas_discovery_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+		_scsih_sas_device_discovery_error_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+		_scsih_sas_broadcast_primitive_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+		_scsih_sas_enclosure_dev_status_change_event(ioc,
+		    fw_event);
+		break;
+	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+		_scsih_sas_ir_config_change_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_IR_VOLUME:
+		_scsih_sas_ir_volume_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_IR_PHYSICAL_DISK:
+		_scsih_sas_ir_physical_disk_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_IR_OPERATION_STATUS:
+		_scsih_sas_ir_operation_status_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
+		_scsih_pcie_device_status_change_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_PCIE_ENUMERATION:
+		_scsih_pcie_enumeration_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+		_scsih_pcie_topology_change_event(ioc, fw_event);
+			return;
+	break;
+	}
+out:
+	fw_event_work_put(fw_event);
+}
+
+/**
+ * _firmware_event_work
+ * @work: The fw_event_work object
+ * Context: user.
+ *
+ * wrappers for the work thread handling firmware events
+ */
+
+static void
+_firmware_event_work(struct work_struct *work)
+{
+	struct fw_event_work *fw_event = container_of(work,
+	    struct fw_event_work, work);
+
+	_mpt3sas_fw_work(fw_event->ioc, fw_event);
+}
+
+/**
+ * mpt3sas_scsih_event_callback - firmware event handler (called at ISR time)
+ * @ioc: per adapter object
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt.
+ *
+ * This function merely adds a new work task into ioc->firmware_event_thread.
+ * The tasks are worked from _firmware_event_work in user context.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
+	u32 reply)
+{
+	struct fw_event_work *fw_event;
+	Mpi2EventNotificationReply_t *mpi_reply;
+	u16 event;
+	u16 sz;
+	Mpi26EventDataActiveCableExcept_t *ActiveCableEventData;
+
+	/* events turned off due to host reset */
+	if (ioc->pci_error_recovery)
+		return 1;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+
+	if (unlikely(!mpi_reply)) {
+		pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 1;
+	}
+
+	event = le16_to_cpu(mpi_reply->Event);
+
+	if (event != MPI2_EVENT_LOG_ENTRY_ADDED)
+		mpt3sas_trigger_event(ioc, event, 0);
+
+	switch (event) {
+	/* handle these */
+	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+	{
+		Mpi2EventDataSasBroadcastPrimitive_t *baen_data =
+		    (Mpi2EventDataSasBroadcastPrimitive_t *)
+		    mpi_reply->EventData;
+
+		if (baen_data->Primitive !=
+		    MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT)
+			return 1;
+
+		if (ioc->broadcast_aen_busy) {
+			ioc->broadcast_aen_pending++;
+			return 1;
+		} else
+			ioc->broadcast_aen_busy = 1;
+		break;
+	}
+
+	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+		_scsih_check_topo_delete_events(ioc,
+		    (Mpi2EventDataSasTopologyChangeList_t *)
+		    mpi_reply->EventData);
+		break;
+	case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+	_scsih_check_pcie_topo_remove_events(ioc,
+		    (Mpi26EventDataPCIeTopologyChangeList_t *)
+		    mpi_reply->EventData);
+		break;
+	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+		_scsih_check_ir_config_unhide_events(ioc,
+		    (Mpi2EventDataIrConfigChangeList_t *)
+		    mpi_reply->EventData);
+		break;
+	case MPI2_EVENT_IR_VOLUME:
+		_scsih_check_volume_delete_events(ioc,
+		    (Mpi2EventDataIrVolume_t *)
+		    mpi_reply->EventData);
+		break;
+	case MPI2_EVENT_LOG_ENTRY_ADDED:
+	{
+		Mpi2EventDataLogEntryAdded_t *log_entry;
+		u32 *log_code;
+
+		if (!ioc->is_warpdrive)
+			break;
+
+		log_entry = (Mpi2EventDataLogEntryAdded_t *)
+		    mpi_reply->EventData;
+		log_code = (u32 *)log_entry->LogData;
+
+		if (le16_to_cpu(log_entry->LogEntryQualifier)
+		    != MPT2_WARPDRIVE_LOGENTRY)
+			break;
+
+		switch (le32_to_cpu(*log_code)) {
+		case MPT2_WARPDRIVE_LC_SSDT:
+			pr_warn(MPT3SAS_FMT "WarpDrive Warning: "
+			    "IO Throttling has occurred in the WarpDrive "
+			    "subsystem. Check WarpDrive documentation for "
+			    "additional details.\n", ioc->name);
+			break;
+		case MPT2_WARPDRIVE_LC_SSDLW:
+			pr_warn(MPT3SAS_FMT "WarpDrive Warning: "
+			    "Program/Erase Cycles for the WarpDrive subsystem "
+			    "in degraded range. Check WarpDrive documentation "
+			    "for additional details.\n", ioc->name);
+			break;
+		case MPT2_WARPDRIVE_LC_SSDLF:
+			pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: "
+			    "There are no Program/Erase Cycles for the "
+			    "WarpDrive subsystem. The storage device will be "
+			    "in read-only mode. Check WarpDrive documentation "
+			    "for additional details.\n", ioc->name);
+			break;
+		case MPT2_WARPDRIVE_LC_BRMF:
+			pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: "
+			    "The Backup Rail Monitor has failed on the "
+			    "WarpDrive subsystem. Check WarpDrive "
+			    "documentation for additional details.\n",
+			    ioc->name);
+			break;
+		}
+
+		break;
+	}
+	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+	case MPI2_EVENT_IR_OPERATION_STATUS:
+	case MPI2_EVENT_SAS_DISCOVERY:
+	case MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+	case MPI2_EVENT_IR_PHYSICAL_DISK:
+	case MPI2_EVENT_PCIE_ENUMERATION:
+	case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
+		break;
+
+	case MPI2_EVENT_TEMP_THRESHOLD:
+		_scsih_temp_threshold_events(ioc,
+			(Mpi2EventDataTemperature_t *)
+			mpi_reply->EventData);
+		break;
+	case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
+		ActiveCableEventData =
+		    (Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData;
+		switch (ActiveCableEventData->ReasonCode) {
+		case MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER:
+			pr_notice(MPT3SAS_FMT
+			    "Currently an active cable with ReceptacleID %d\n",
+			    ioc->name, ActiveCableEventData->ReceptacleID);
+			pr_notice("cannot be powered and devices connected\n");
+			pr_notice("to this active cable will not be seen\n");
+			pr_notice("This active cable requires %d mW of power\n",
+			     ActiveCableEventData->ActiveCablePowerRequirement);
+			break;
+
+		case MPI26_EVENT_ACTIVE_CABLE_DEGRADED:
+			pr_notice(MPT3SAS_FMT
+			    "Currently a cable with ReceptacleID %d\n",
+			    ioc->name, ActiveCableEventData->ReceptacleID);
+			pr_notice(
+			    "is not running at optimal speed(12 Gb/s rate)\n");
+			break;
+		}
+
+		break;
+
+	default: /* ignore the rest */
+		return 1;
+	}
+
+	sz = le16_to_cpu(mpi_reply->EventDataLength) * 4;
+	fw_event = alloc_fw_event_work(sz);
+	if (!fw_event) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 1;
+	}
+
+	memcpy(fw_event->event_data, mpi_reply->EventData, sz);
+	fw_event->ioc = ioc;
+	fw_event->VF_ID = mpi_reply->VF_ID;
+	fw_event->VP_ID = mpi_reply->VP_ID;
+	fw_event->event = event;
+	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
+	return 1;
+}
+
+/**
+ * _scsih_expander_node_remove - removing expander device from list.
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ *
+ * Removing object and freeing associated memory from the
+ * ioc->sas_expander_list.
+ */
+static void
+_scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander)
+{
+	struct _sas_port *mpt3sas_port, *next;
+	unsigned long flags;
+
+	/* remove sibling ports attached to this expander */
+	list_for_each_entry_safe(mpt3sas_port, next,
+	   &sas_expander->sas_port_list, port_list) {
+		if (ioc->shost_recovery)
+			return;
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_END_DEVICE)
+			mpt3sas_device_remove_by_sas_address(ioc,
+			    mpt3sas_port->remote_identify.sas_address);
+		else if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_EDGE_EXPANDER_DEVICE ||
+		    mpt3sas_port->remote_identify.device_type ==
+		    SAS_FANOUT_EXPANDER_DEVICE)
+			mpt3sas_expander_remove(ioc,
+			    mpt3sas_port->remote_identify.sas_address);
+	}
+
+	mpt3sas_transport_port_remove(ioc, sas_expander->sas_address,
+	    sas_expander->sas_address_parent);
+
+	pr_info(MPT3SAS_FMT
+		"expander_remove: handle(0x%04x), sas_addr(0x%016llx)\n",
+		ioc->name,
+	    sas_expander->handle, (unsigned long long)
+	    sas_expander->sas_address);
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	list_del(&sas_expander->list);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	kfree(sas_expander->phy);
+	kfree(sas_expander);
+}
+
+/**
+ * _scsih_ir_shutdown - IR shutdown notification
+ * @ioc: per adapter object
+ *
+ * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
+ * the host system is shutting down.
+ */
+static void
+_scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidActionRequest_t *mpi_request;
+	Mpi2RaidActionReply_t *mpi_reply;
+	u16 smid;
+
+	/* is IR firmware build loaded ? */
+	if (!ioc->ir_firmware)
+		return;
+
+	/* are there any volumes ? */
+	if (list_empty(&ioc->raid_device_list))
+		return;
+
+	mutex_lock(&ioc->scsih_cmds.mutex);
+
+	if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: scsih_cmd in use\n",
+		    ioc->name, __func__);
+		goto out;
+	}
+	ioc->scsih_cmds.status = MPT3_CMD_PENDING;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+		goto out;
+	}
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->scsih_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
+
+	mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
+	mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
+
+	if (!ioc->hide_ir_msg)
+		pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name);
+	init_completion(&ioc->scsih_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
+
+	if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		goto out;
+	}
+
+	if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
+		mpi_reply = ioc->scsih_cmds.reply;
+		if (!ioc->hide_ir_msg)
+			pr_info(MPT3SAS_FMT "IR shutdown "
+			   "(complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+			    le32_to_cpu(mpi_reply->IOCLogInfo));
+	}
+
+ out:
+	ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_unlock(&ioc->scsih_cmds.mutex);
+}
+
+/**
+ * scsih_remove - detach and remove add host
+ * @pdev: PCI device struct
+ *
+ * Routine called when unloading the driver.
+ */
+static void scsih_remove(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct _sas_port *mpt3sas_port, *next_port;
+	struct _raid_device *raid_device, *next;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _pcie_device *pcie_device, *pcienext;
+	struct workqueue_struct	*wq;
+	unsigned long flags;
+
+	ioc->remove_host = 1;
+
+	if (!pci_device_is_present(pdev))
+		_scsih_flush_running_cmds(ioc);
+
+	_scsih_fw_event_cleanup_queue(ioc);
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	wq = ioc->firmware_event_thread;
+	ioc->firmware_event_thread = NULL;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+	if (wq)
+		destroy_workqueue(wq);
+
+	/* release all the volumes */
+	_scsih_ir_shutdown(ioc);
+	sas_remove_host(shost);
+	list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
+	    list) {
+		if (raid_device->starget) {
+			sas_target_priv_data =
+			    raid_device->starget->hostdata;
+			sas_target_priv_data->deleted = 1;
+			scsi_remove_target(&raid_device->starget->dev);
+		}
+		pr_info(MPT3SAS_FMT "removing handle(0x%04x), wwid(0x%016llx)\n",
+			ioc->name,  raid_device->handle,
+		    (unsigned long long) raid_device->wwid);
+		_scsih_raid_device_remove(ioc, raid_device);
+	}
+	list_for_each_entry_safe(pcie_device, pcienext, &ioc->pcie_device_list,
+		list) {
+		_scsih_pcie_device_remove_from_sml(ioc, pcie_device);
+		list_del_init(&pcie_device->list);
+		pcie_device_put(pcie_device);
+	}
+
+	/* free ports attached to the sas_host */
+	list_for_each_entry_safe(mpt3sas_port, next_port,
+	   &ioc->sas_hba.sas_port_list, port_list) {
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_END_DEVICE)
+			mpt3sas_device_remove_by_sas_address(ioc,
+			    mpt3sas_port->remote_identify.sas_address);
+		else if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_EDGE_EXPANDER_DEVICE ||
+		    mpt3sas_port->remote_identify.device_type ==
+		    SAS_FANOUT_EXPANDER_DEVICE)
+			mpt3sas_expander_remove(ioc,
+			    mpt3sas_port->remote_identify.sas_address);
+	}
+
+	/* free phys attached to the sas_host */
+	if (ioc->sas_hba.num_phys) {
+		kfree(ioc->sas_hba.phy);
+		ioc->sas_hba.phy = NULL;
+		ioc->sas_hba.num_phys = 0;
+	}
+
+	mpt3sas_base_detach(ioc);
+	spin_lock(&gioc_lock);
+	list_del(&ioc->list);
+	spin_unlock(&gioc_lock);
+	scsi_host_put(shost);
+}
+
+/**
+ * scsih_shutdown - routine call during system shutdown
+ * @pdev: PCI device struct
+ */
+static void
+scsih_shutdown(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct workqueue_struct	*wq;
+	unsigned long flags;
+
+	ioc->remove_host = 1;
+
+	if (!pci_device_is_present(pdev))
+		_scsih_flush_running_cmds(ioc);
+
+	_scsih_fw_event_cleanup_queue(ioc);
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	wq = ioc->firmware_event_thread;
+	ioc->firmware_event_thread = NULL;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+	if (wq)
+		destroy_workqueue(wq);
+
+	_scsih_ir_shutdown(ioc);
+	mpt3sas_base_detach(ioc);
+}
+
+
+/**
+ * _scsih_probe_boot_devices - reports 1st device
+ * @ioc: per adapter object
+ *
+ * If specified in bios page 2, this routine reports the 1st
+ * device scsi-ml or sas transport for persistent boot device
+ * purposes.  Please refer to function _scsih_determine_boot_device()
+ */
+static void
+_scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 channel;
+	void *device;
+	struct _sas_device *sas_device;
+	struct _raid_device *raid_device;
+	struct _pcie_device *pcie_device;
+	u16 handle;
+	u64 sas_address_parent;
+	u64 sas_address;
+	unsigned long flags;
+	int rc;
+	int tid;
+
+	 /* no Bios, return immediately */
+	if (!ioc->bios_pg3.BiosVersion)
+		return;
+
+	device = NULL;
+	if (ioc->req_boot_device.device) {
+		device =  ioc->req_boot_device.device;
+		channel = ioc->req_boot_device.channel;
+	} else if (ioc->req_alt_boot_device.device) {
+		device =  ioc->req_alt_boot_device.device;
+		channel = ioc->req_alt_boot_device.channel;
+	} else if (ioc->current_boot_device.device) {
+		device =  ioc->current_boot_device.device;
+		channel = ioc->current_boot_device.channel;
+	}
+
+	if (!device)
+		return;
+
+	if (channel == RAID_CHANNEL) {
+		raid_device = device;
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+	} else if (channel == PCIE_CHANNEL) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = device;
+		tid = pcie_device->id;
+		list_move_tail(&pcie_device->list, &ioc->pcie_device_list);
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		rc = scsi_add_device(ioc->shost, PCIE_CHANNEL, tid, 0);
+		if (rc)
+			_scsih_pcie_device_remove(ioc, pcie_device);
+	} else {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = device;
+		handle = sas_device->handle;
+		sas_address_parent = sas_device->sas_address_parent;
+		sas_address = sas_device->sas_address;
+		list_move_tail(&sas_device->list, &ioc->sas_device_list);
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+		if (ioc->hide_drives)
+			return;
+		if (!mpt3sas_transport_port_add(ioc, handle,
+		    sas_address_parent)) {
+			_scsih_sas_device_remove(ioc, sas_device);
+		} else if (!sas_device->starget) {
+			if (!ioc->is_driver_loading) {
+				mpt3sas_transport_port_remove(ioc,
+				    sas_address,
+				    sas_address_parent);
+				_scsih_sas_device_remove(ioc, sas_device);
+			}
+		}
+	}
+}
+
+/**
+ * _scsih_probe_raid - reporting raid volumes to scsi-ml
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_raid(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _raid_device *raid_device, *raid_next;
+	int rc;
+
+	list_for_each_entry_safe(raid_device, raid_next,
+	    &ioc->raid_device_list, list) {
+		if (raid_device->starget)
+			continue;
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+	}
+}
+
+static struct _sas_device *get_next_sas_device(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _sas_device *sas_device = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	if (!list_empty(&ioc->sas_device_init_list)) {
+		sas_device = list_first_entry(&ioc->sas_device_init_list,
+				struct _sas_device, list);
+		sas_device_get(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return sas_device;
+}
+
+static void sas_device_make_active(struct MPT3SAS_ADAPTER *ioc,
+		struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+
+	/*
+	 * Since we dropped the lock during the call to port_add(), we need to
+	 * be careful here that somebody else didn't move or delete this item
+	 * while we were busy with other things.
+	 *
+	 * If it was on the list, we need a put() for the reference the list
+	 * had. Either way, we need a get() for the destination list.
+	 */
+	if (!list_empty(&sas_device->list)) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+
+	sas_device_get(sas_device);
+	list_add_tail(&sas_device->list, &ioc->sas_device_list);
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_probe_sas - reporting sas devices to sas transport
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _sas_device *sas_device;
+
+	if (ioc->hide_drives)
+		return;
+
+	while ((sas_device = get_next_sas_device(ioc))) {
+		if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
+		    sas_device->sas_address_parent)) {
+			_scsih_sas_device_remove(ioc, sas_device);
+			sas_device_put(sas_device);
+			continue;
+		} else if (!sas_device->starget) {
+			/*
+			 * When asyn scanning is enabled, its not possible to
+			 * remove devices while scanning is turned on due to an
+			 * oops in scsi_sysfs_add_sdev()->add_device()->
+			 * sysfs_addrm_start()
+			 */
+			if (!ioc->is_driver_loading) {
+				mpt3sas_transport_port_remove(ioc,
+				    sas_device->sas_address,
+				    sas_device->sas_address_parent);
+				_scsih_sas_device_remove(ioc, sas_device);
+				sas_device_put(sas_device);
+				continue;
+			}
+		}
+		sas_device_make_active(ioc, sas_device);
+		sas_device_put(sas_device);
+	}
+}
+
+/**
+ * get_next_pcie_device - Get the next pcie device
+ * @ioc: per adapter object
+ *
+ * Get the next pcie device from pcie_device_init_list list.
+ *
+ * Return: pcie device structure if pcie_device_init_list list is not empty
+ * otherwise returns NULL
+ */
+static struct _pcie_device *get_next_pcie_device(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _pcie_device *pcie_device = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	if (!list_empty(&ioc->pcie_device_init_list)) {
+		pcie_device = list_first_entry(&ioc->pcie_device_init_list,
+				struct _pcie_device, list);
+		pcie_device_get(pcie_device);
+	}
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	return pcie_device;
+}
+
+/**
+ * pcie_device_make_active - Add pcie device to pcie_device_list list
+ * @ioc: per adapter object
+ * @pcie_device: pcie device object
+ *
+ * Add the pcie device which has registered with SCSI Transport Later to
+ * pcie_device_list list
+ */
+static void pcie_device_make_active(struct MPT3SAS_ADAPTER *ioc,
+		struct _pcie_device *pcie_device)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+
+	if (!list_empty(&pcie_device->list)) {
+		list_del_init(&pcie_device->list);
+		pcie_device_put(pcie_device);
+	}
+	pcie_device_get(pcie_device);
+	list_add_tail(&pcie_device->list, &ioc->pcie_device_list);
+
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+
+/**
+ * _scsih_probe_pcie - reporting PCIe devices to scsi-ml
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_pcie(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _pcie_device *pcie_device;
+	int rc;
+
+	/* PCIe Device List */
+	while ((pcie_device = get_next_pcie_device(ioc))) {
+		if (pcie_device->starget) {
+			pcie_device_put(pcie_device);
+			continue;
+		}
+		rc = scsi_add_device(ioc->shost, PCIE_CHANNEL,
+			pcie_device->id, 0);
+		if (rc) {
+			_scsih_pcie_device_remove(ioc, pcie_device);
+			pcie_device_put(pcie_device);
+			continue;
+		} else if (!pcie_device->starget) {
+			/*
+			 * When async scanning is enabled, its not possible to
+			 * remove devices while scanning is turned on due to an
+			 * oops in scsi_sysfs_add_sdev()->add_device()->
+			 * sysfs_addrm_start()
+			 */
+			if (!ioc->is_driver_loading) {
+			/* TODO-- Need to find out whether this condition will
+			 * occur or not
+			 */
+				_scsih_pcie_device_remove(ioc, pcie_device);
+				pcie_device_put(pcie_device);
+				continue;
+			}
+		}
+		pcie_device_make_active(ioc, pcie_device);
+		pcie_device_put(pcie_device);
+	}
+}
+
+/**
+ * _scsih_probe_devices - probing for devices
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	u16 volume_mapping_flags;
+
+	if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
+		return;  /* return when IOC doesn't support initiator mode */
+
+	_scsih_probe_boot_devices(ioc);
+
+	if (ioc->ir_firmware) {
+		volume_mapping_flags =
+		    le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
+		    MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
+		if (volume_mapping_flags ==
+		    MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
+			_scsih_probe_raid(ioc);
+			_scsih_probe_sas(ioc);
+		} else {
+			_scsih_probe_sas(ioc);
+			_scsih_probe_raid(ioc);
+		}
+	} else {
+		_scsih_probe_sas(ioc);
+		_scsih_probe_pcie(ioc);
+	}
+}
+
+/**
+ * scsih_scan_start - scsi lld callback for .scan_start
+ * @shost: SCSI host pointer
+ *
+ * The shost has the ability to discover targets on its own instead
+ * of scanning the entire bus.  In our implemention, we will kick off
+ * firmware discovery.
+ */
+static void
+scsih_scan_start(struct Scsi_Host *shost)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	int rc;
+	if (diag_buffer_enable != -1 && diag_buffer_enable != 0)
+		mpt3sas_enable_diag_buffer(ioc, diag_buffer_enable);
+
+	if (disable_discovery > 0)
+		return;
+
+	ioc->start_scan = 1;
+	rc = mpt3sas_port_enable(ioc);
+
+	if (rc != 0)
+		pr_info(MPT3SAS_FMT "port enable: FAILED\n", ioc->name);
+}
+
+/**
+ * scsih_scan_finished - scsi lld callback for .scan_finished
+ * @shost: SCSI host pointer
+ * @time: elapsed time of the scan in jiffies
+ *
+ * This function will be called periodicallyn until it returns 1 with the
+ * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
+ * we wait for firmware discovery to complete, then return 1.
+ */
+static int
+scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	if (disable_discovery > 0) {
+		ioc->is_driver_loading = 0;
+		ioc->wait_for_discovery_to_complete = 0;
+		return 1;
+	}
+
+	if (time >= (300 * HZ)) {
+		ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+		pr_info(MPT3SAS_FMT
+			"port enable: FAILED with timeout (timeout=300s)\n",
+			ioc->name);
+		ioc->is_driver_loading = 0;
+		return 1;
+	}
+
+	if (ioc->start_scan)
+		return 0;
+
+	if (ioc->start_scan_failed) {
+		pr_info(MPT3SAS_FMT
+			"port enable: FAILED with (ioc_status=0x%08x)\n",
+			ioc->name, ioc->start_scan_failed);
+		ioc->is_driver_loading = 0;
+		ioc->wait_for_discovery_to_complete = 0;
+		ioc->remove_host = 1;
+		return 1;
+	}
+
+	pr_info(MPT3SAS_FMT "port enable: SUCCESS\n", ioc->name);
+	ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+
+	if (ioc->wait_for_discovery_to_complete) {
+		ioc->wait_for_discovery_to_complete = 0;
+		_scsih_probe_devices(ioc);
+	}
+	mpt3sas_base_start_watchdog(ioc);
+	ioc->is_driver_loading = 0;
+	return 1;
+}
+
+/* shost template for SAS 2.0 HBA devices */
+static struct scsi_host_template mpt2sas_driver_template = {
+	.module				= THIS_MODULE,
+	.name				= "Fusion MPT SAS Host",
+	.proc_name			= MPT2SAS_DRIVER_NAME,
+	.queuecommand			= scsih_qcmd,
+	.target_alloc			= scsih_target_alloc,
+	.slave_alloc			= scsih_slave_alloc,
+	.slave_configure		= scsih_slave_configure,
+	.target_destroy			= scsih_target_destroy,
+	.slave_destroy			= scsih_slave_destroy,
+	.scan_finished			= scsih_scan_finished,
+	.scan_start			= scsih_scan_start,
+	.change_queue_depth		= scsih_change_queue_depth,
+	.eh_abort_handler		= scsih_abort,
+	.eh_device_reset_handler	= scsih_dev_reset,
+	.eh_target_reset_handler	= scsih_target_reset,
+	.eh_host_reset_handler		= scsih_host_reset,
+	.bios_param			= scsih_bios_param,
+	.can_queue			= 1,
+	.this_id			= -1,
+	.sg_tablesize			= MPT2SAS_SG_DEPTH,
+	.max_sectors			= 32767,
+	.cmd_per_lun			= 7,
+	.use_clustering			= ENABLE_CLUSTERING,
+	.shost_attrs			= mpt3sas_host_attrs,
+	.sdev_attrs			= mpt3sas_dev_attrs,
+	.track_queue_depth		= 1,
+	.cmd_size			= sizeof(struct scsiio_tracker),
+};
+
+/* raid transport support for SAS 2.0 HBA devices */
+static struct raid_function_template mpt2sas_raid_functions = {
+	.cookie		= &mpt2sas_driver_template,
+	.is_raid	= scsih_is_raid,
+	.get_resync	= scsih_get_resync,
+	.get_state	= scsih_get_state,
+};
+
+/* shost template for SAS 3.0 HBA devices */
+static struct scsi_host_template mpt3sas_driver_template = {
+	.module				= THIS_MODULE,
+	.name				= "Fusion MPT SAS Host",
+	.proc_name			= MPT3SAS_DRIVER_NAME,
+	.queuecommand			= scsih_qcmd,
+	.target_alloc			= scsih_target_alloc,
+	.slave_alloc			= scsih_slave_alloc,
+	.slave_configure		= scsih_slave_configure,
+	.target_destroy			= scsih_target_destroy,
+	.slave_destroy			= scsih_slave_destroy,
+	.scan_finished			= scsih_scan_finished,
+	.scan_start			= scsih_scan_start,
+	.change_queue_depth		= scsih_change_queue_depth,
+	.eh_abort_handler		= scsih_abort,
+	.eh_device_reset_handler	= scsih_dev_reset,
+	.eh_target_reset_handler	= scsih_target_reset,
+	.eh_host_reset_handler		= scsih_host_reset,
+	.bios_param			= scsih_bios_param,
+	.can_queue			= 1,
+	.this_id			= -1,
+	.sg_tablesize			= MPT3SAS_SG_DEPTH,
+	.max_sectors			= 32767,
+	.cmd_per_lun			= 7,
+	.use_clustering			= ENABLE_CLUSTERING,
+	.shost_attrs			= mpt3sas_host_attrs,
+	.sdev_attrs			= mpt3sas_dev_attrs,
+	.track_queue_depth		= 1,
+	.cmd_size			= sizeof(struct scsiio_tracker),
+};
+
+/* raid transport support for SAS 3.0 HBA devices */
+static struct raid_function_template mpt3sas_raid_functions = {
+	.cookie		= &mpt3sas_driver_template,
+	.is_raid	= scsih_is_raid,
+	.get_resync	= scsih_get_resync,
+	.get_state	= scsih_get_state,
+};
+
+/**
+ * _scsih_determine_hba_mpi_version - determine in which MPI version class
+ *					this device belongs to.
+ * @pdev: PCI device struct
+ *
+ * return MPI2_VERSION for SAS 2.0 HBA devices,
+ *	MPI25_VERSION for SAS 3.0 HBA devices, and
+ *	MPI26 VERSION for Cutlass & Invader SAS 3.0 HBA devices
+ */
+static u16
+_scsih_determine_hba_mpi_version(struct pci_dev *pdev)
+{
+
+	switch (pdev->device) {
+	case MPI2_MFGPAGE_DEVID_SSS6200:
+	case MPI2_MFGPAGE_DEVID_SAS2004:
+	case MPI2_MFGPAGE_DEVID_SAS2008:
+	case MPI2_MFGPAGE_DEVID_SAS2108_1:
+	case MPI2_MFGPAGE_DEVID_SAS2108_2:
+	case MPI2_MFGPAGE_DEVID_SAS2108_3:
+	case MPI2_MFGPAGE_DEVID_SAS2116_1:
+	case MPI2_MFGPAGE_DEVID_SAS2116_2:
+	case MPI2_MFGPAGE_DEVID_SAS2208_1:
+	case MPI2_MFGPAGE_DEVID_SAS2208_2:
+	case MPI2_MFGPAGE_DEVID_SAS2208_3:
+	case MPI2_MFGPAGE_DEVID_SAS2208_4:
+	case MPI2_MFGPAGE_DEVID_SAS2208_5:
+	case MPI2_MFGPAGE_DEVID_SAS2208_6:
+	case MPI2_MFGPAGE_DEVID_SAS2308_1:
+	case MPI2_MFGPAGE_DEVID_SAS2308_2:
+	case MPI2_MFGPAGE_DEVID_SAS2308_3:
+	case MPI2_MFGPAGE_DEVID_SAS2308_MPI_EP:
+		return MPI2_VERSION;
+	case MPI25_MFGPAGE_DEVID_SAS3004:
+	case MPI25_MFGPAGE_DEVID_SAS3008:
+	case MPI25_MFGPAGE_DEVID_SAS3108_1:
+	case MPI25_MFGPAGE_DEVID_SAS3108_2:
+	case MPI25_MFGPAGE_DEVID_SAS3108_5:
+	case MPI25_MFGPAGE_DEVID_SAS3108_6:
+		return MPI25_VERSION;
+	case MPI26_MFGPAGE_DEVID_SAS3216:
+	case MPI26_MFGPAGE_DEVID_SAS3224:
+	case MPI26_MFGPAGE_DEVID_SAS3316_1:
+	case MPI26_MFGPAGE_DEVID_SAS3316_2:
+	case MPI26_MFGPAGE_DEVID_SAS3316_3:
+	case MPI26_MFGPAGE_DEVID_SAS3316_4:
+	case MPI26_MFGPAGE_DEVID_SAS3324_1:
+	case MPI26_MFGPAGE_DEVID_SAS3324_2:
+	case MPI26_MFGPAGE_DEVID_SAS3324_3:
+	case MPI26_MFGPAGE_DEVID_SAS3324_4:
+	case MPI26_MFGPAGE_DEVID_SAS3508:
+	case MPI26_MFGPAGE_DEVID_SAS3508_1:
+	case MPI26_MFGPAGE_DEVID_SAS3408:
+	case MPI26_MFGPAGE_DEVID_SAS3516:
+	case MPI26_MFGPAGE_DEVID_SAS3516_1:
+	case MPI26_MFGPAGE_DEVID_SAS3416:
+	case MPI26_MFGPAGE_DEVID_SAS3616:
+		return MPI26_VERSION;
+	}
+	return 0;
+}
+
+/**
+ * _scsih_probe - attach and add scsi host
+ * @pdev: PCI device struct
+ * @id: pci device id
+ *
+ * Return: 0 success, anything else error.
+ */
+static int
+_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct MPT3SAS_ADAPTER *ioc;
+	struct Scsi_Host *shost = NULL;
+	int rv;
+	u16 hba_mpi_version;
+
+	/* Determine in which MPI version class this pci device belongs */
+	hba_mpi_version = _scsih_determine_hba_mpi_version(pdev);
+	if (hba_mpi_version == 0)
+		return -ENODEV;
+
+	/* Enumerate only SAS 2.0 HBA's if hbas_to_enumerate is one,
+	 * for other generation HBA's return with -ENODEV
+	 */
+	if ((hbas_to_enumerate == 1) && (hba_mpi_version !=  MPI2_VERSION))
+		return -ENODEV;
+
+	/* Enumerate only SAS 3.0 HBA's if hbas_to_enumerate is two,
+	 * for other generation HBA's return with -ENODEV
+	 */
+	if ((hbas_to_enumerate == 2) && (!(hba_mpi_version ==  MPI25_VERSION
+		|| hba_mpi_version ==  MPI26_VERSION)))
+		return -ENODEV;
+
+	switch (hba_mpi_version) {
+	case MPI2_VERSION:
+		pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S |
+			PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+		/* Use mpt2sas driver host template for SAS 2.0 HBA's */
+		shost = scsi_host_alloc(&mpt2sas_driver_template,
+		  sizeof(struct MPT3SAS_ADAPTER));
+		if (!shost)
+			return -ENODEV;
+		ioc = shost_priv(shost);
+		memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
+		ioc->hba_mpi_version_belonged = hba_mpi_version;
+		ioc->id = mpt2_ids++;
+		sprintf(ioc->driver_name, "%s", MPT2SAS_DRIVER_NAME);
+		switch (pdev->device) {
+		case MPI2_MFGPAGE_DEVID_SSS6200:
+			ioc->is_warpdrive = 1;
+			ioc->hide_ir_msg = 1;
+			break;
+		case MPI2_MFGPAGE_DEVID_SAS2308_MPI_EP:
+			ioc->is_mcpu_endpoint = 1;
+			break;
+		default:
+			ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
+			break;
+		}
+		break;
+	case MPI25_VERSION:
+	case MPI26_VERSION:
+		/* Use mpt3sas driver host template for SAS 3.0 HBA's */
+		shost = scsi_host_alloc(&mpt3sas_driver_template,
+		  sizeof(struct MPT3SAS_ADAPTER));
+		if (!shost)
+			return -ENODEV;
+		ioc = shost_priv(shost);
+		memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
+		ioc->hba_mpi_version_belonged = hba_mpi_version;
+		ioc->id = mpt3_ids++;
+		sprintf(ioc->driver_name, "%s", MPT3SAS_DRIVER_NAME);
+		switch (pdev->device) {
+		case MPI26_MFGPAGE_DEVID_SAS3508:
+		case MPI26_MFGPAGE_DEVID_SAS3508_1:
+		case MPI26_MFGPAGE_DEVID_SAS3408:
+		case MPI26_MFGPAGE_DEVID_SAS3516:
+		case MPI26_MFGPAGE_DEVID_SAS3516_1:
+		case MPI26_MFGPAGE_DEVID_SAS3416:
+		case MPI26_MFGPAGE_DEVID_SAS3616:
+			ioc->is_gen35_ioc = 1;
+			break;
+		default:
+			ioc->is_gen35_ioc = 0;
+		}
+		if ((ioc->hba_mpi_version_belonged == MPI25_VERSION &&
+			pdev->revision >= SAS3_PCI_DEVICE_C0_REVISION) ||
+			(ioc->hba_mpi_version_belonged == MPI26_VERSION)) {
+			ioc->combined_reply_queue = 1;
+			if (ioc->is_gen35_ioc)
+				ioc->combined_reply_index_count =
+				 MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G35;
+			else
+				ioc->combined_reply_index_count =
+				 MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G3;
+		}
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	INIT_LIST_HEAD(&ioc->list);
+	spin_lock(&gioc_lock);
+	list_add_tail(&ioc->list, &mpt3sas_ioc_list);
+	spin_unlock(&gioc_lock);
+	ioc->shost = shost;
+	ioc->pdev = pdev;
+	ioc->scsi_io_cb_idx = scsi_io_cb_idx;
+	ioc->tm_cb_idx = tm_cb_idx;
+	ioc->ctl_cb_idx = ctl_cb_idx;
+	ioc->base_cb_idx = base_cb_idx;
+	ioc->port_enable_cb_idx = port_enable_cb_idx;
+	ioc->transport_cb_idx = transport_cb_idx;
+	ioc->scsih_cb_idx = scsih_cb_idx;
+	ioc->config_cb_idx = config_cb_idx;
+	ioc->tm_tr_cb_idx = tm_tr_cb_idx;
+	ioc->tm_tr_volume_cb_idx = tm_tr_volume_cb_idx;
+	ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
+	ioc->logging_level = logging_level;
+	ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds;
+	/* misc semaphores and spin locks */
+	mutex_init(&ioc->reset_in_progress_mutex);
+	/* initializing pci_access_mutex lock */
+	mutex_init(&ioc->pci_access_mutex);
+	spin_lock_init(&ioc->ioc_reset_in_progress_lock);
+	spin_lock_init(&ioc->scsi_lookup_lock);
+	spin_lock_init(&ioc->sas_device_lock);
+	spin_lock_init(&ioc->sas_node_lock);
+	spin_lock_init(&ioc->fw_event_lock);
+	spin_lock_init(&ioc->raid_device_lock);
+	spin_lock_init(&ioc->pcie_device_lock);
+	spin_lock_init(&ioc->diag_trigger_lock);
+
+	INIT_LIST_HEAD(&ioc->sas_device_list);
+	INIT_LIST_HEAD(&ioc->sas_device_init_list);
+	INIT_LIST_HEAD(&ioc->sas_expander_list);
+	INIT_LIST_HEAD(&ioc->enclosure_list);
+	INIT_LIST_HEAD(&ioc->pcie_device_list);
+	INIT_LIST_HEAD(&ioc->pcie_device_init_list);
+	INIT_LIST_HEAD(&ioc->fw_event_list);
+	INIT_LIST_HEAD(&ioc->raid_device_list);
+	INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
+	INIT_LIST_HEAD(&ioc->delayed_tr_list);
+	INIT_LIST_HEAD(&ioc->delayed_sc_list);
+	INIT_LIST_HEAD(&ioc->delayed_event_ack_list);
+	INIT_LIST_HEAD(&ioc->delayed_tr_volume_list);
+	INIT_LIST_HEAD(&ioc->reply_queue_list);
+
+	sprintf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id);
+
+	/* init shost parameters */
+	shost->max_cmd_len = 32;
+	shost->max_lun = max_lun;
+	shost->transportt = mpt3sas_transport_template;
+	shost->unique_id = ioc->id;
+
+	if (ioc->is_mcpu_endpoint) {
+		/* mCPU MPI support 64K max IO */
+		shost->max_sectors = 128;
+		pr_info(MPT3SAS_FMT
+				"The max_sectors value is set to %d\n",
+				ioc->name, shost->max_sectors);
+	} else {
+		if (max_sectors != 0xFFFF) {
+			if (max_sectors < 64) {
+				shost->max_sectors = 64;
+				pr_warn(MPT3SAS_FMT "Invalid value %d passed " \
+				    "for max_sectors, range is 64 to 32767. " \
+				    "Assigning value of 64.\n", \
+				    ioc->name, max_sectors);
+			} else if (max_sectors > 32767) {
+				shost->max_sectors = 32767;
+				pr_warn(MPT3SAS_FMT "Invalid value %d passed " \
+				    "for max_sectors, range is 64 to 32767." \
+				    "Assigning default value of 32767.\n", \
+				    ioc->name, max_sectors);
+			} else {
+				shost->max_sectors = max_sectors & 0xFFFE;
+				pr_info(MPT3SAS_FMT
+					"The max_sectors value is set to %d\n",
+					ioc->name, shost->max_sectors);
+			}
+		}
+	}
+	/* register EEDP capabilities with SCSI layer */
+	if (prot_mask > 0)
+		scsi_host_set_prot(shost, prot_mask);
+	else
+		scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
+				   | SHOST_DIF_TYPE2_PROTECTION
+				   | SHOST_DIF_TYPE3_PROTECTION);
+
+	scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
+
+	/* event thread */
+	snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
+	    "fw_event_%s%d", ioc->driver_name, ioc->id);
+	ioc->firmware_event_thread = alloc_ordered_workqueue(
+	    ioc->firmware_event_name, 0);
+	if (!ioc->firmware_event_thread) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rv = -ENODEV;
+		goto out_thread_fail;
+	}
+
+	ioc->is_driver_loading = 1;
+	if ((mpt3sas_base_attach(ioc))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rv = -ENODEV;
+		goto out_attach_fail;
+	}
+
+	if (ioc->is_warpdrive) {
+		if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS)
+			ioc->hide_drives = 0;
+		else if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_HIDE_ALL_DISKS)
+			ioc->hide_drives = 1;
+		else {
+			if (mpt3sas_get_num_volumes(ioc))
+				ioc->hide_drives = 1;
+			else
+				ioc->hide_drives = 0;
+		}
+	} else
+		ioc->hide_drives = 0;
+
+	rv = scsi_add_host(shost, &pdev->dev);
+	if (rv) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out_add_shost_fail;
+	}
+
+	scsi_scan_host(shost);
+	return 0;
+out_add_shost_fail:
+	mpt3sas_base_detach(ioc);
+ out_attach_fail:
+	destroy_workqueue(ioc->firmware_event_thread);
+ out_thread_fail:
+	spin_lock(&gioc_lock);
+	list_del(&ioc->list);
+	spin_unlock(&gioc_lock);
+	scsi_host_put(shost);
+	return rv;
+}
+
+#ifdef CONFIG_PM
+/**
+ * scsih_suspend - power management suspend main entry point
+ * @pdev: PCI device struct
+ * @state: PM state change to (usually PCI_D3)
+ *
+ * Return: 0 success, anything else error.
+ */
+static int
+scsih_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	pci_power_t device_state;
+
+	mpt3sas_base_stop_watchdog(ioc);
+	flush_scheduled_work();
+	scsi_block_requests(shost);
+	device_state = pci_choose_state(pdev, state);
+	pr_info(MPT3SAS_FMT
+		"pdev=0x%p, slot=%s, entering operating state [D%d]\n",
+		ioc->name, pdev, pci_name(pdev), device_state);
+
+	pci_save_state(pdev);
+	mpt3sas_base_free_resources(ioc);
+	pci_set_power_state(pdev, device_state);
+	return 0;
+}
+
+/**
+ * scsih_resume - power management resume main entry point
+ * @pdev: PCI device struct
+ *
+ * Return: 0 success, anything else error.
+ */
+static int
+scsih_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	pci_power_t device_state = pdev->current_state;
+	int r;
+
+	pr_info(MPT3SAS_FMT
+		"pdev=0x%p, slot=%s, previous operating state [D%d]\n",
+		ioc->name, pdev, pci_name(pdev), device_state);
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_enable_wake(pdev, PCI_D0, 0);
+	pci_restore_state(pdev);
+	ioc->pdev = pdev;
+	r = mpt3sas_base_map_resources(ioc);
+	if (r)
+		return r;
+
+	mpt3sas_base_hard_reset_handler(ioc, SOFT_RESET);
+	scsi_unblock_requests(shost);
+	mpt3sas_base_start_watchdog(ioc);
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+/**
+ * scsih_pci_error_detected - Called when a PCI error is detected.
+ * @pdev: PCI device struct
+ * @state: PCI channel state
+ *
+ * Description: Called when a PCI error is detected.
+ *
+ * Return: PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT.
+ */
+static pci_ers_result_t
+scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	pr_info(MPT3SAS_FMT "PCI error: detected callback, state(%d)!!\n",
+	    ioc->name, state);
+
+	switch (state) {
+	case pci_channel_io_normal:
+		return PCI_ERS_RESULT_CAN_RECOVER;
+	case pci_channel_io_frozen:
+		/* Fatal error, prepare for slot reset */
+		ioc->pci_error_recovery = 1;
+		scsi_block_requests(ioc->shost);
+		mpt3sas_base_stop_watchdog(ioc);
+		mpt3sas_base_free_resources(ioc);
+		return PCI_ERS_RESULT_NEED_RESET;
+	case pci_channel_io_perm_failure:
+		/* Permanent error, prepare for device removal */
+		ioc->pci_error_recovery = 1;
+		mpt3sas_base_stop_watchdog(ioc);
+		_scsih_flush_running_cmds(ioc);
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * scsih_pci_slot_reset - Called when PCI slot has been reset.
+ * @pdev: PCI device struct
+ *
+ * Description: This routine is called by the pci error recovery
+ * code after the PCI slot has been reset, just before we
+ * should resume normal operations.
+ */
+static pci_ers_result_t
+scsih_pci_slot_reset(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	int rc;
+
+	pr_info(MPT3SAS_FMT "PCI error: slot reset callback!!\n",
+	     ioc->name);
+
+	ioc->pci_error_recovery = 0;
+	ioc->pdev = pdev;
+	pci_restore_state(pdev);
+	rc = mpt3sas_base_map_resources(ioc);
+	if (rc)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+
+	pr_warn(MPT3SAS_FMT "hard reset: %s\n", ioc->name,
+	    (rc == 0) ? "success" : "failed");
+
+	if (!rc)
+		return PCI_ERS_RESULT_RECOVERED;
+	else
+		return PCI_ERS_RESULT_DISCONNECT;
+}
+
+/**
+ * scsih_pci_resume() - resume normal ops after PCI reset
+ * @pdev: pointer to PCI device
+ *
+ * Called when the error recovery driver tells us that its
+ * OK to resume normal operation. Use completion to allow
+ * halted scsi ops to resume.
+ */
+static void
+scsih_pci_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	pr_info(MPT3SAS_FMT "PCI error: resume callback!!\n", ioc->name);
+
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+	mpt3sas_base_start_watchdog(ioc);
+	scsi_unblock_requests(ioc->shost);
+}
+
+/**
+ * scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
+ * @pdev: pointer to PCI device
+ */
+static pci_ers_result_t
+scsih_pci_mmio_enabled(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	pr_info(MPT3SAS_FMT "PCI error: mmio enabled callback!!\n",
+	    ioc->name);
+
+	/* TODO - dump whatever for debugging purposes */
+
+	/* This called only if scsih_pci_error_detected returns
+	 * PCI_ERS_RESULT_CAN_RECOVER. Read/write to the device still
+	 * works, no need to reset slot.
+	 */
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * scsih__ncq_prio_supp - Check for NCQ command priority support
+ * @sdev: scsi device struct
+ *
+ * This is called when a user indicates they would like to enable
+ * ncq command priorities. This works only on SATA devices.
+ */
+bool scsih_ncq_prio_supp(struct scsi_device *sdev)
+{
+	unsigned char *buf;
+	bool ncq_prio_supp = false;
+
+	if (!scsi_device_supports_vpd(sdev))
+		return ncq_prio_supp;
+
+	buf = kmalloc(SCSI_VPD_PG_LEN, GFP_KERNEL);
+	if (!buf)
+		return ncq_prio_supp;
+
+	if (!scsi_get_vpd_page(sdev, 0x89, buf, SCSI_VPD_PG_LEN))
+		ncq_prio_supp = (buf[213] >> 4) & 1;
+
+	kfree(buf);
+	return ncq_prio_supp;
+}
+/*
+ * The pci device ids are defined in mpi/mpi2_cnfg.h.
+ */
+static const struct pci_device_id mpt3sas_pci_table[] = {
+	/* Spitfire ~ 2004 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Falcon ~ 2008 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Liberator ~ 2108 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Meteor ~ 2116 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Thunderbolt ~ 2208 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Mustang ~ 2308 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_MPI_EP,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* SSS6200 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Fury ~ 3004 and 3008 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Invader ~ 3108 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Cutlass ~ 3216 and 3224 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3216,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3224,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Intruder ~ 3316 and 3324 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_4,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_4,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Ventura, Crusader, Harpoon & Tomcat ~ 3516, 3416, 3508 & 3408*/
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3508,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3508_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3408,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3516,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3516_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3416,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Mercator ~ 3616*/
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3616,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{0}     /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, mpt3sas_pci_table);
+
+static struct pci_error_handlers _mpt3sas_err_handler = {
+	.error_detected	= scsih_pci_error_detected,
+	.mmio_enabled	= scsih_pci_mmio_enabled,
+	.slot_reset	= scsih_pci_slot_reset,
+	.resume		= scsih_pci_resume,
+};
+
+static struct pci_driver mpt3sas_driver = {
+	.name		= MPT3SAS_DRIVER_NAME,
+	.id_table	= mpt3sas_pci_table,
+	.probe		= _scsih_probe,
+	.remove		= scsih_remove,
+	.shutdown	= scsih_shutdown,
+	.err_handler	= &_mpt3sas_err_handler,
+#ifdef CONFIG_PM
+	.suspend	= scsih_suspend,
+	.resume		= scsih_resume,
+#endif
+};
+
+/**
+ * scsih_init - main entry point for this driver.
+ *
+ * Return: 0 success, anything else error.
+ */
+static int
+scsih_init(void)
+{
+	mpt2_ids = 0;
+	mpt3_ids = 0;
+
+	mpt3sas_base_initialize_callback_handler();
+
+	 /* queuecommand callback hander */
+	scsi_io_cb_idx = mpt3sas_base_register_callback_handler(_scsih_io_done);
+
+	/* task management callback handler */
+	tm_cb_idx = mpt3sas_base_register_callback_handler(_scsih_tm_done);
+
+	/* base internal commands callback handler */
+	base_cb_idx = mpt3sas_base_register_callback_handler(mpt3sas_base_done);
+	port_enable_cb_idx = mpt3sas_base_register_callback_handler(
+	    mpt3sas_port_enable_done);
+
+	/* transport internal commands callback handler */
+	transport_cb_idx = mpt3sas_base_register_callback_handler(
+	    mpt3sas_transport_done);
+
+	/* scsih internal commands callback handler */
+	scsih_cb_idx = mpt3sas_base_register_callback_handler(_scsih_done);
+
+	/* configuration page API internal commands callback handler */
+	config_cb_idx = mpt3sas_base_register_callback_handler(
+	    mpt3sas_config_done);
+
+	/* ctl module callback handler */
+	ctl_cb_idx = mpt3sas_base_register_callback_handler(mpt3sas_ctl_done);
+
+	tm_tr_cb_idx = mpt3sas_base_register_callback_handler(
+	    _scsih_tm_tr_complete);
+
+	tm_tr_volume_cb_idx = mpt3sas_base_register_callback_handler(
+	    _scsih_tm_volume_tr_complete);
+
+	tm_sas_control_cb_idx = mpt3sas_base_register_callback_handler(
+	    _scsih_sas_control_complete);
+
+	return 0;
+}
+
+/**
+ * scsih_exit - exit point for this driver (when it is a module).
+ *
+ * Return: 0 success, anything else error.
+ */
+static void
+scsih_exit(void)
+{
+
+	mpt3sas_base_release_callback_handler(scsi_io_cb_idx);
+	mpt3sas_base_release_callback_handler(tm_cb_idx);
+	mpt3sas_base_release_callback_handler(base_cb_idx);
+	mpt3sas_base_release_callback_handler(port_enable_cb_idx);
+	mpt3sas_base_release_callback_handler(transport_cb_idx);
+	mpt3sas_base_release_callback_handler(scsih_cb_idx);
+	mpt3sas_base_release_callback_handler(config_cb_idx);
+	mpt3sas_base_release_callback_handler(ctl_cb_idx);
+
+	mpt3sas_base_release_callback_handler(tm_tr_cb_idx);
+	mpt3sas_base_release_callback_handler(tm_tr_volume_cb_idx);
+	mpt3sas_base_release_callback_handler(tm_sas_control_cb_idx);
+
+/* raid transport support */
+	if (hbas_to_enumerate != 1)
+		raid_class_release(mpt3sas_raid_template);
+	if (hbas_to_enumerate != 2)
+		raid_class_release(mpt2sas_raid_template);
+	sas_release_transport(mpt3sas_transport_template);
+}
+
+/**
+ * _mpt3sas_init - main entry point for this driver.
+ *
+ * Return: 0 success, anything else error.
+ */
+static int __init
+_mpt3sas_init(void)
+{
+	int error;
+
+	pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME,
+					MPT3SAS_DRIVER_VERSION);
+
+	mpt3sas_transport_template =
+	    sas_attach_transport(&mpt3sas_transport_functions);
+	if (!mpt3sas_transport_template)
+		return -ENODEV;
+
+	/* No need attach mpt3sas raid functions template
+	 * if hbas_to_enumarate value is one.
+	 */
+	if (hbas_to_enumerate != 1) {
+		mpt3sas_raid_template =
+				raid_class_attach(&mpt3sas_raid_functions);
+		if (!mpt3sas_raid_template) {
+			sas_release_transport(mpt3sas_transport_template);
+			return -ENODEV;
+		}
+	}
+
+	/* No need to attach mpt2sas raid functions template
+	 * if hbas_to_enumarate value is two
+	 */
+	if (hbas_to_enumerate != 2) {
+		mpt2sas_raid_template =
+				raid_class_attach(&mpt2sas_raid_functions);
+		if (!mpt2sas_raid_template) {
+			sas_release_transport(mpt3sas_transport_template);
+			return -ENODEV;
+		}
+	}
+
+	error = scsih_init();
+	if (error) {
+		scsih_exit();
+		return error;
+	}
+
+	mpt3sas_ctl_init(hbas_to_enumerate);
+
+	error = pci_register_driver(&mpt3sas_driver);
+	if (error)
+		scsih_exit();
+
+	return error;
+}
+
+/**
+ * _mpt3sas_exit - exit point for this driver (when it is a module).
+ *
+ */
+static void __exit
+_mpt3sas_exit(void)
+{
+	pr_info("mpt3sas version %s unloading\n",
+				MPT3SAS_DRIVER_VERSION);
+
+	mpt3sas_ctl_exit(hbas_to_enumerate);
+
+	pci_unregister_driver(&mpt3sas_driver);
+
+	scsih_exit();
+}
+
+module_init(_mpt3sas_init);
+module_exit(_mpt3sas_exit);