Adding upstream version 4.19.304.upstream/4.19.304upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 279 insertions, 32 deletions

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 8c8aa3b9c..b0c5f0dba 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -85,7 +85,6 @@ struct serial8250_config {
 #define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
 #define UART_BUG_NOMSR	(1 << 2)	/* UART has buggy MSR status bits (Au1x00) */
 #define UART_BUG_THRE	(1 << 3)	/* UART has buggy THRE reassertion */
-#define UART_BUG_PARITY	(1 << 4)	/* UART mishandles parity if FIFO enabled */
 
 
 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
new file mode 100644
index 000000000..1cf229cca
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Synopsys DesignWare 8250 library. */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+
+#include "8250_dwlib.h"
+
+/* Offsets for the DesignWare specific registers */
+#define DW_UART_DLF	0xc0 /* Divisor Latch Fraction Register */
+#define DW_UART_CPR	0xf4 /* Component Parameter Register */
+#define DW_UART_UCV	0xf8 /* UART Component Version */
+
+/* Component Parameter Register bits */
+#define DW_UART_CPR_ABP_DATA_WIDTH	(3 << 0)
+#define DW_UART_CPR_AFCE_MODE		(1 << 4)
+#define DW_UART_CPR_THRE_MODE		(1 << 5)
+#define DW_UART_CPR_SIR_MODE		(1 << 6)
+#define DW_UART_CPR_SIR_LP_MODE		(1 << 7)
+#define DW_UART_CPR_ADDITIONAL_FEATURES	(1 << 8)
+#define DW_UART_CPR_FIFO_ACCESS		(1 << 9)
+#define DW_UART_CPR_FIFO_STAT		(1 << 10)
+#define DW_UART_CPR_SHADOW		(1 << 11)
+#define DW_UART_CPR_ENCODED_PARMS	(1 << 12)
+#define DW_UART_CPR_DMA_EXTRA		(1 << 13)
+#define DW_UART_CPR_FIFO_MODE		(0xff << 16)
+
+/* Helper for FIFO size calculation */
+#define DW_UART_CPR_FIFO_SIZE(a)	(((a >> 16) & 0xff) * 16)
+
+static inline u32 dw8250_readl_ext(struct uart_port *p, int offset)
+{
+	if (p->iotype == UPIO_MEM32BE)
+		return ioread32be(p->membase + offset);
+	return readl(p->membase + offset);
+}
+
+static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg)
+{
+	if (p->iotype == UPIO_MEM32BE)
+		iowrite32be(reg, p->membase + offset);
+	else
+		writel(reg, p->membase + offset);
+}
+
+/*
+ * divisor = div(I) + div(F)
+ * "I" means integer, "F" means fractional
+ * quot = div(I) = clk / (16 * baud)
+ * frac = div(F) * 2^dlf_size
+ *
+ * let rem = clk % (16 * baud)
+ * we have: div(F) * (16 * baud) = rem
+ * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud)
+ */
+static unsigned int dw8250_get_divisor(struct uart_port *p, unsigned int baud,
+				       unsigned int *frac)
+{
+	unsigned int quot, rem, base_baud = baud * 16;
+	struct dw8250_port_data *d = p->private_data;
+
+	quot = p->uartclk / base_baud;
+	rem = p->uartclk % base_baud;
+	*frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud);
+
+	return quot;
+}
+
+static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
+			       unsigned int quot, unsigned int quot_frac)
+{
+	dw8250_writel_ext(p, DW_UART_DLF, quot_frac);
+	serial8250_do_set_divisor(p, baud, quot, quot_frac);
+}
+
+void dw8250_setup_port(struct uart_port *p)
+{
+	struct uart_8250_port *up = up_to_u8250p(p);
+	u32 reg, old_dlf;
+
+	/*
+	 * If the Component Version Register returns zero, we know that
+	 * ADDITIONAL_FEATURES are not enabled. No need to go any further.
+	 */
+	reg = dw8250_readl_ext(p, DW_UART_UCV);
+	if (!reg)
+		return;
+
+	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
+		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
+
+	/* Preserve value written by firmware or bootloader  */
+	old_dlf = dw8250_readl_ext(p, DW_UART_DLF);
+	dw8250_writel_ext(p, DW_UART_DLF, ~0U);
+	reg = dw8250_readl_ext(p, DW_UART_DLF);
+	dw8250_writel_ext(p, DW_UART_DLF, old_dlf);
+
+	if (reg) {
+		struct dw8250_port_data *d = p->private_data;
+
+		d->dlf_size = fls(reg);
+		p->get_divisor = dw8250_get_divisor;
+		p->set_divisor = dw8250_set_divisor;
+	}
+
+	reg = dw8250_readl_ext(p, DW_UART_CPR);
+	if (!reg)
+		return;
+
+	/* Select the type based on FIFO */
+	if (reg & DW_UART_CPR_FIFO_MODE) {
+		p->type = PORT_16550A;
+		p->flags |= UPF_FIXED_TYPE;
+		p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
+		up->capabilities = UART_CAP_FIFO;
+	}
+
+	if (reg & DW_UART_CPR_AFCE_MODE)
+		up->capabilities |= UART_CAP_AFE;
+
+	if (reg & DW_UART_CPR_SIR_MODE)
+		up->capabilities |= UART_CAP_IRDA;
+}
+EXPORT_SYMBOL_GPL(dw8250_setup_port);
diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h
new file mode 100644
index 000000000..87a4db2a8
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_dwlib.h
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Synopsys DesignWare 8250 library header file. */
+
+#include <linux/types.h>
+
+#include "8250.h"
+
+struct dw8250_port_data {
+	/* Port properties */
+	int			line;
+
+	/* DMA operations */
+	struct uart_8250_dma	dma;
+
+	/* Hardware configuration */
+	u8			dlf_size;
+};
+
+void dw8250_setup_port(struct uart_port *p);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 5cd8c36c8..2acaea5f3 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -176,6 +176,7 @@ static int __init early_omap8250_setup(struct earlycon_device *device,
 OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup);
 OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
 OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
+OF_EARLYCON_DECLARE(omap8250, "ti,am654-uart", early_omap8250_setup);
 
 #endif
 
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 274e644f3..d05b155b4 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1049,14 +1049,6 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev)
 	return number_uarts;
 }
 
-static int pci_asix_setup(struct serial_private *priv,
-		  const struct pciserial_board *board,
-		  struct uart_8250_port *port, int idx)
-{
-	port->bugs |= UART_BUG_PARITY;
-	return pci_default_setup(priv, board, port, idx);
-}
-
 /* Quatech devices have their own extra interface features */
 
 struct quatech_feature {
@@ -1683,7 +1675,6 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_WCH_CH355_4S	0x7173
 #define PCI_VENDOR_ID_AGESTAR		0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375	0x6872
-#define PCI_VENDOR_ID_ASIX		0x9710
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
 #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
 
@@ -2455,16 +2446,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.setup          = pci_wch_ch38x_setup,
 	},
 	/*
-	 * ASIX devices with FIFO bug
-	 */
-	{
-		.vendor		= PCI_VENDOR_ID_ASIX,
-		.device		= PCI_ANY_ID,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_asix_setup,
-	},
-	/*
 	 * Broadcom TruManage (NetXtreme)
 	 */
 	{
@@ -4791,6 +4772,12 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		pbn_b1_bt_1_115200 },
 
 	/*
+	 * IntaShield IS-100
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0D60,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_1_115200 },
+	/*
 	 * IntaShield IS-200
 	 */
 	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
@@ -4817,10 +4804,14 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_1_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AA2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_1_115200 },
 	/*
-	 * Brainboxes UC-257
+	 * Brainboxes UC-253/UC-734
 	 */
-	{	PCI_VENDOR_ID_INTASHIELD, 0x0861,
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0CA1,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_2_115200 },
@@ -4856,6 +4847,14 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x08E2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x08E3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
 	/*
 	 * Brainboxes UC-310
 	 */
@@ -4866,6 +4865,14 @@ static const struct pci_device_id serial_pci_tbl[] = {
 	/*
 	 * Brainboxes UC-313
 	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x08A1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{       PCI_VENDOR_ID_INTASHIELD, 0x08A2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
 	{       PCI_VENDOR_ID_INTASHIELD, 0x08A3,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
@@ -4880,6 +4887,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
 	/*
 	 * Brainboxes UC-346
 	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B01,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
 	{	PCI_VENDOR_ID_INTASHIELD, 0x0B02,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
@@ -4891,6 +4902,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0A82,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
 	{	PCI_VENDOR_ID_INTASHIELD, 0x0A83,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
@@ -4903,13 +4918,95 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		0, 0,
 		pbn_b2_4_115200 },
 	/*
-	 * Brainboxes UC-420/431
+	 * Brainboxes UC-420
 	 */
 	{       PCI_VENDOR_ID_INTASHIELD, 0x0921,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_4_115200 },
 	/*
+	 * Brainboxes UC-607
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x09A1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x09A2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x09A3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-836
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0D41,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
+	/*
+	 * Brainboxes UP-189
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AC1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AC2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AC3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UP-200
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B21,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B22,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B23,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UP-869
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C01,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C02,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C03,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UP-880
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C21,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C22,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C23,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
 	 * Perle PCI-RAS cards
 	 */
 	{       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index cba4888bc..7f5d51de6 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1910,7 +1910,10 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 		skip_rx = true;
 
 	if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) {
-		if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
+		struct irq_data *d;
+
+		d = irq_get_irq_data(port->irq);
+		if (d && irqd_is_wakeup_set(d))
 			pm_wakeup_event(tport->tty->dev, 0);
 		if (!up->dma || handle_rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
@@ -2617,11 +2620,8 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
 
 	if (c_cflag & CSTOPB)
 		cval |= UART_LCR_STOP;
-	if (c_cflag & PARENB) {
+	if (c_cflag & PARENB)
 		cval |= UART_LCR_PARITY;
-		if (up->bugs & UART_BUG_PARITY)
-			up->fifo_bug = true;
-	}
 	if (!(c_cflag & PARODD))
 		cval |= UART_LCR_EPAR;
 #ifdef CMSPAR
@@ -2735,8 +2735,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	up->lcr = cval;					/* Save computed LCR */
 
 	if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
-		/* NOTE: If fifo_bug is not set, a user can set RX_trigger. */
-		if ((baud < 2400 && !up->dma) || up->fifo_bug) {
+		if (baud < 2400 && !up->dma) {
 			up->fcr &= ~UART_FCR_TRIGGER_MASK;
 			up->fcr |= UART_FCR_TRIGGER_1;
 		}
@@ -3072,8 +3071,7 @@ static int do_set_rxtrig(struct tty_port *port, unsigned char bytes)
 	struct uart_8250_port *up = up_to_u8250p(uport);
 	int rxtrig;
 
-	if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1 ||
-	    up->fifo_bug)
+	if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1)
 		return -EINVAL;
 
 	rxtrig = bytes_to_fcr_rxtrig(up, bytes);
@@ -3229,6 +3227,7 @@ void serial8250_init_port(struct uart_8250_port *up)
 	struct uart_port *port = &up->port;
 
 	spin_lock_init(&port->lock);
+	port->pm = NULL;
 	port->ops = &serial8250_pops;
 
 	up->cur_iotype = 0xFF;
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index a9ddd76d4..733ac3209 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -312,6 +312,9 @@ config SERIAL_8250_RSA
 
 	  If you don't have such card, or if unsure, say N.
 
+config SERIAL_8250_DWLIB
+	bool
+
 config SERIAL_8250_ACORN
 	tristate "Acorn expansion card serial port support"
 	depends on ARCH_ACORN && SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 18751bc63..9b451d815 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_SERIAL_8250)		+= 8250.o 8250_base.o
 8250-$(CONFIG_SERIAL_8250_PNP)		+= 8250_pnp.o
 8250_base-y				:= 8250_port.o
 8250_base-$(CONFIG_SERIAL_8250_DMA)	+= 8250_dma.o
+8250_base-$(CONFIG_SERIAL_8250_DWLIB)	+= 8250_dwlib.o
 8250_base-$(CONFIG_SERIAL_8250_FINTEK)	+= 8250_fintek.o
 obj-$(CONFIG_SERIAL_8250_GSC)		+= 8250_gsc.o
 obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o