diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-08 04:15:09 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-08 04:15:09 +0000 |
commit | d78786f17f03109c3e9c7043b1b63f947afb0ee0 (patch) | |
tree | 58709afdbb58c9a8b795c712d281a6b5710d36cc /drivers/tty/serial/serial-tegra.c | |
parent | Adding debian version 4.19.269-1. (diff) | |
download | linux-d78786f17f03109c3e9c7043b1b63f947afb0ee0.tar.xz linux-d78786f17f03109c3e9c7043b1b63f947afb0ee0.zip |
Merging upstream version 4.19.282.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/tty/serial/serial-tegra.c')
-rw-r--r-- | drivers/tty/serial/serial-tegra.c | 388 |
1 files changed, 325 insertions, 63 deletions
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index ee480a148..41fe45f23 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -62,7 +62,7 @@ #define TEGRA_UART_TX_TRIG_4B 0x20 #define TEGRA_UART_TX_TRIG_1B 0x30 -#define TEGRA_UART_MAXIMUM 5 +#define TEGRA_UART_MAXIMUM 8 /* Default UART setting when started: 115200 no parity, stop, 8 data bits */ #define TEGRA_UART_DEFAULT_BAUD 115200 @@ -72,6 +72,8 @@ #define TEGRA_TX_PIO 1 #define TEGRA_TX_DMA 2 +#define TEGRA_UART_FCR_IIR_FIFO_EN 0x40 + /** * tegra_uart_chip_data: SOC specific data. * @@ -84,6 +86,17 @@ struct tegra_uart_chip_data { bool tx_fifo_full_status; bool allow_txfifo_reset_fifo_mode; bool support_clk_src_div; + bool fifo_mode_enable_status; + int uart_max_port; + int max_dma_burst_bytes; + int error_tolerance_low_range; + int error_tolerance_high_range; +}; + +struct tegra_baud_tolerance { + u32 lower_range_baud; + u32 upper_range_baud; + s32 tolerance; }; struct tegra_uart_port { @@ -122,10 +135,19 @@ struct tegra_uart_port { dma_cookie_t rx_cookie; unsigned int tx_bytes_requested; unsigned int rx_bytes_requested; + struct tegra_baud_tolerance *baud_tolerance; + int n_adjustable_baud_rates; + int required_rate; + int configured_rate; + bool use_rx_pio; + bool use_tx_pio; + bool rx_dma_active; }; static void tegra_uart_start_next_tx(struct tegra_uart_port *tup); static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup); +static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup, + bool dma_to_memory); static inline unsigned long tegra_uart_read(struct tegra_uart_port *tup, unsigned long reg) @@ -243,6 +265,21 @@ static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup, tup->current_baud)); } +static int tegra_uart_wait_fifo_mode_enabled(struct tegra_uart_port *tup) +{ + unsigned long iir; + unsigned int tmout = 100; + + do { + iir = tegra_uart_read(tup, UART_IIR); + if (iir & TEGRA_UART_FCR_IIR_FIFO_EN) + return 0; + udelay(1); + } while (--tmout); + + return -ETIMEDOUT; +} + static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits) { unsigned long fcr = tup->fcr_shadow; @@ -258,6 +295,8 @@ static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits) tegra_uart_write(tup, fcr, UART_FCR); fcr |= UART_FCR_ENABLE_FIFO; tegra_uart_write(tup, fcr, UART_FCR); + if (tup->cdata->fifo_mode_enable_status) + tegra_uart_wait_fifo_mode_enabled(tup); } /* Dummy read to ensure the write is posted */ @@ -271,6 +310,37 @@ static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits) tegra_uart_wait_cycle_time(tup, 32); } +static long tegra_get_tolerance_rate(struct tegra_uart_port *tup, + unsigned int baud, long rate) +{ + int i; + + for (i = 0; i < tup->n_adjustable_baud_rates; ++i) { + if (baud >= tup->baud_tolerance[i].lower_range_baud && + baud <= tup->baud_tolerance[i].upper_range_baud) + return (rate + (rate * + tup->baud_tolerance[i].tolerance) / 10000); + } + + return rate; +} + +static int tegra_check_rate_in_range(struct tegra_uart_port *tup) +{ + long diff; + + diff = ((long)(tup->configured_rate - tup->required_rate) * 10000) + / tup->required_rate; + if (diff < (tup->cdata->error_tolerance_low_range * 100) || + diff > (tup->cdata->error_tolerance_high_range * 100)) { + dev_err(tup->uport.dev, + "configured baud rate is out of range by %ld", diff); + return -EIO; + } + + return 0; +} + static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud) { unsigned long rate; @@ -283,13 +353,22 @@ static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud) if (tup->cdata->support_clk_src_div) { rate = baud * 16; + tup->required_rate = rate; + + if (tup->n_adjustable_baud_rates) + rate = tegra_get_tolerance_rate(tup, baud, rate); + ret = clk_set_rate(tup->uart_clk, rate); if (ret < 0) { dev_err(tup->uport.dev, "clk_set_rate() failed for rate %lu\n", rate); return ret; } + tup->configured_rate = clk_get_rate(tup->uart_clk); divisor = 1; + ret = tegra_check_rate_in_range(tup); + if (ret < 0) + return ret; } else { rate = clk_get_rate(tup->uart_clk); divisor = DIV_ROUND_CLOSEST(rate, baud * 16); @@ -440,12 +519,15 @@ static void tegra_uart_start_next_tx(struct tegra_uart_port *tup) unsigned long count; struct circ_buf *xmit = &tup->uport.state->xmit; + if (!tup->current_baud) + return; + tail = (unsigned long)&xmit->buf[xmit->tail]; count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); if (!count) return; - if (count < TEGRA_UART_MIN_DMA) + if (tup->use_tx_pio || count < TEGRA_UART_MIN_DMA) tegra_uart_start_pio_tx(tup, count); else if (BYTES_TO_ALIGN(tail) > 0) tegra_uart_start_pio_tx(tup, BYTES_TO_ALIGN(tail)); @@ -488,8 +570,9 @@ static void tegra_uart_stop_tx(struct uart_port *u) if (tup->tx_in_progress != TEGRA_UART_TX_DMA) return; - dmaengine_terminate_all(tup->tx_dma_chan); + dmaengine_pause(tup->tx_dma_chan); dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state); + dmaengine_terminate_all(tup->tx_dma_chan); count = tup->tx_bytes_requested - state.residue; async_tx_ack(tup->tx_dma_desc); uart_xmit_advance(&tup->uport, count); @@ -555,11 +638,22 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup, TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE); } +static void do_handle_rx_pio(struct tegra_uart_port *tup) +{ + struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); + struct tty_port *port = &tup->uport.state->port; + + tegra_uart_handle_rx_pio(tup, port); + if (tty) { + tty_flip_buffer_push(port); + tty_kref_put(tty); + } +} + static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup, unsigned int residue) { struct tty_port *port = &tup->uport.state->port; - struct tty_struct *tty = tty_port_tty_get(port); unsigned int count; async_tx_ack(tup->rx_dma_desc); @@ -568,11 +662,7 @@ static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup, /* If we are here, DMA is stopped */ tegra_uart_copy_rx_to_tty(tup, port, count); - tegra_uart_handle_rx_pio(tup, port); - if (tty) { - tty_flip_buffer_push(port); - tty_kref_put(tty); - } + do_handle_rx_pio(tup); } static void tegra_uart_rx_dma_complete(void *args) @@ -596,6 +686,7 @@ static void tegra_uart_rx_dma_complete(void *args) if (tup->rts_active) set_rts(tup, false); + tup->rx_dma_active = false; tegra_uart_rx_buffer_push(tup, 0); tegra_uart_start_rx_dma(tup); @@ -607,18 +698,30 @@ done: spin_unlock_irqrestore(&u->lock, flags); } -static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup) +static void tegra_uart_terminate_rx_dma(struct tegra_uart_port *tup) { struct dma_tx_state state; + if (!tup->rx_dma_active) { + do_handle_rx_pio(tup); + return; + } + + dmaengine_pause(tup->rx_dma_chan); + dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); + dmaengine_terminate_all(tup->rx_dma_chan); + + tegra_uart_rx_buffer_push(tup, state.residue); + tup->rx_dma_active = false; +} + +static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup) +{ /* Deactivate flow control to stop sender */ if (tup->rts_active) set_rts(tup, false); - dmaengine_terminate_all(tup->rx_dma_chan); - dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); - tegra_uart_rx_buffer_push(tup, state.residue); - tegra_uart_start_rx_dma(tup); + tegra_uart_terminate_rx_dma(tup); if (tup->rts_active) set_rts(tup, true); @@ -628,6 +731,9 @@ static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup) { unsigned int count = TEGRA_UART_RX_DMA_BUFFER_SIZE; + if (tup->rx_dma_active) + return 0; + tup->rx_dma_desc = dmaengine_prep_slave_single(tup->rx_dma_chan, tup->rx_dma_buf_phys, count, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); @@ -636,6 +742,7 @@ static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup) return -EIO; } + tup->rx_dma_active = true; tup->rx_dma_desc->callback = tegra_uart_rx_dma_complete; tup->rx_dma_desc->callback_param = tup; dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys, @@ -673,6 +780,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data) struct uart_port *u = &tup->uport; unsigned long iir; unsigned long ier; + bool is_rx_start = false; bool is_rx_int = false; unsigned long flags; @@ -680,15 +788,17 @@ static irqreturn_t tegra_uart_isr(int irq, void *data) while (1) { iir = tegra_uart_read(tup, UART_IIR); if (iir & UART_IIR_NO_INT) { - if (is_rx_int) { + if (!tup->use_rx_pio && is_rx_int) { tegra_uart_handle_rx_dma(tup); if (tup->rx_in_progress) { ier = tup->ier_shadow; ier |= (UART_IER_RLSI | UART_IER_RTOIE | - TEGRA_UART_IER_EORD); + TEGRA_UART_IER_EORD | UART_IER_RDI); tup->ier_shadow = ier; tegra_uart_write(tup, ier, UART_IER); } + } else if (is_rx_start) { + tegra_uart_start_rx_dma(tup); } spin_unlock_irqrestore(&u->lock, flags); return IRQ_HANDLED; @@ -707,17 +817,25 @@ static irqreturn_t tegra_uart_isr(int irq, void *data) case 4: /* End of data */ case 6: /* Rx timeout */ - case 2: /* Receive */ - if (!is_rx_int) { - is_rx_int = true; + if (!tup->use_rx_pio) { + is_rx_int = tup->rx_in_progress; /* Disable Rx interrupts */ ier = tup->ier_shadow; - ier |= UART_IER_RDI; - tegra_uart_write(tup, ier, UART_IER); ier &= ~(UART_IER_RDI | UART_IER_RLSI | UART_IER_RTOIE | TEGRA_UART_IER_EORD); tup->ier_shadow = ier; tegra_uart_write(tup, ier, UART_IER); + break; + } + /* Fall through */ + case 2: /* Receive */ + if (!tup->use_rx_pio) { + is_rx_start = tup->rx_in_progress; + tup->ier_shadow &= ~UART_IER_RDI; + tegra_uart_write(tup, tup->ier_shadow, + UART_IER); + } else { + do_handle_rx_pio(tup); } break; @@ -736,7 +854,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data) static void tegra_uart_stop_rx(struct uart_port *u) { struct tegra_uart_port *tup = to_tegra_uport(u); - struct dma_tx_state state; + struct tty_port *port = &tup->uport.state->port; unsigned long ier; if (tup->rts_active) @@ -753,9 +871,11 @@ static void tegra_uart_stop_rx(struct uart_port *u) tup->ier_shadow = ier; tegra_uart_write(tup, ier, UART_IER); tup->rx_in_progress = 0; - dmaengine_terminate_all(tup->rx_dma_chan); - dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); - tegra_uart_rx_buffer_push(tup, state.residue); + + if (!tup->use_rx_pio) + tegra_uart_terminate_rx_dma(tup); + else + tegra_uart_handle_rx_pio(tup, port); } static void tegra_uart_hw_deinit(struct tegra_uart_port *tup) @@ -803,6 +923,14 @@ static void tegra_uart_hw_deinit(struct tegra_uart_port *tup) tup->current_baud = 0; spin_unlock_irqrestore(&tup->uport.lock, flags); + tup->rx_in_progress = 0; + tup->tx_in_progress = 0; + + if (!tup->use_rx_pio) + tegra_uart_dma_channel_free(tup, true); + if (!tup->use_tx_pio) + tegra_uart_dma_channel_free(tup, false); + clk_disable_unprepare(tup->uart_clk); } @@ -845,45 +973,62 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) * programmed in the DMA registers. */ tup->fcr_shadow = UART_FCR_ENABLE_FIFO; - tup->fcr_shadow |= UART_FCR_R_TRIG_01; + + if (tup->use_rx_pio) { + tup->fcr_shadow |= UART_FCR_R_TRIG_11; + } else { + if (tup->cdata->max_dma_burst_bytes == 8) + tup->fcr_shadow |= UART_FCR_R_TRIG_10; + else + tup->fcr_shadow |= UART_FCR_R_TRIG_01; + } + tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B; tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); /* Dummy read to ensure the write is posted */ tegra_uart_read(tup, UART_SCR); - /* - * For all tegra devices (up to t210), there is a hardware issue that - * requires software to wait for 3 UART clock periods after enabling - * the TX fifo, otherwise data could be lost. - */ - tegra_uart_wait_cycle_time(tup, 3); + if (tup->cdata->fifo_mode_enable_status) { + ret = tegra_uart_wait_fifo_mode_enabled(tup); + if (ret < 0) { + dev_err(tup->uport.dev, + "Failed to enable FIFO mode: %d\n", ret); + return ret; + } + } else { + /* + * For all tegra devices (up to t210), there is a hardware + * issue that requires software to wait for 3 UART clock + * periods after enabling the TX fifo, otherwise data could + * be lost. + */ + tegra_uart_wait_cycle_time(tup, 3); + } /* * Initialize the UART with default configuration * (115200, N, 8, 1) so that the receive DMA buffer may be * enqueued */ - tup->lcr_shadow = TEGRA_UART_DEFAULT_LSR; - tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD); - tup->fcr_shadow |= UART_FCR_DMA_SELECT; - tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); - - ret = tegra_uart_start_rx_dma(tup); + ret = tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD); if (ret < 0) { - dev_err(tup->uport.dev, "Not able to start Rx DMA\n"); + dev_err(tup->uport.dev, "Failed to set baud rate\n"); return ret; } + if (!tup->use_rx_pio) { + tup->lcr_shadow = TEGRA_UART_DEFAULT_LSR; + tup->fcr_shadow |= UART_FCR_DMA_SELECT; + tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); + } else { + tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); + } tup->rx_in_progress = 1; /* * Enable IE_RXS for the receive status interrupts like line errros. * Enable IE_RX_TIMEOUT to get the bytes which cannot be DMA'd. * - * If using DMA mode, enable EORD instead of receive interrupt which - * will interrupt after the UART is done with the receive instead of - * the interrupt when the FIFO "threshold" is reached. - * * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when * the DATA is sitting in the FIFO and couldn't be transferred to the * DMA as the DMA size alignment(4 bytes) is not met. EORD will be @@ -894,7 +1039,15 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) * both the EORD as well as RX_TIMEOUT - SW sees RX_TIMEOUT first * then the EORD. */ - tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | TEGRA_UART_IER_EORD; + tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | UART_IER_RDI; + + /* + * If using DMA mode, enable EORD interrupt to notify about RX + * completion. + */ + if (!tup->use_rx_pio) + tup->ier_shadow |= TEGRA_UART_IER_EORD; + tegra_uart_write(tup, tup->ier_shadow, UART_IER); return 0; } @@ -951,7 +1104,7 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup, } dma_sconfig.src_addr = tup->uport.mapbase; dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - dma_sconfig.src_maxburst = 4; + dma_sconfig.src_maxburst = tup->cdata->max_dma_burst_bytes; tup->rx_dma_chan = dma_chan; tup->rx_dma_buf_virt = dma_buf; tup->rx_dma_buf_phys = dma_phys; @@ -989,16 +1142,22 @@ static int tegra_uart_startup(struct uart_port *u) struct tegra_uart_port *tup = to_tegra_uport(u); int ret; - ret = tegra_uart_dma_channel_allocate(tup, false); - if (ret < 0) { - dev_err(u->dev, "Tx Dma allocation failed, err = %d\n", ret); - return ret; + if (!tup->use_tx_pio) { + ret = tegra_uart_dma_channel_allocate(tup, false); + if (ret < 0) { + dev_err(u->dev, "Tx Dma allocation failed, err = %d\n", + ret); + return ret; + } } - ret = tegra_uart_dma_channel_allocate(tup, true); - if (ret < 0) { - dev_err(u->dev, "Rx Dma allocation failed, err = %d\n", ret); - goto fail_rx_dma; + if (!tup->use_rx_pio) { + ret = tegra_uart_dma_channel_allocate(tup, true); + if (ret < 0) { + dev_err(u->dev, "Rx Dma allocation failed, err = %d\n", + ret); + goto fail_rx_dma; + } } ret = tegra_uart_hw_init(tup); @@ -1016,9 +1175,11 @@ static int tegra_uart_startup(struct uart_port *u) return 0; fail_hw_init: - tegra_uart_dma_channel_free(tup, true); + if (!tup->use_rx_pio) + tegra_uart_dma_channel_free(tup, true); fail_rx_dma: - tegra_uart_dma_channel_free(tup, false); + if (!tup->use_tx_pio) + tegra_uart_dma_channel_free(tup, false); return ret; } @@ -1040,12 +1201,6 @@ static void tegra_uart_shutdown(struct uart_port *u) struct tegra_uart_port *tup = to_tegra_uport(u); tegra_uart_hw_deinit(tup); - - tup->rx_in_progress = 0; - tup->tx_in_progress = 0; - - tegra_uart_dma_channel_free(tup, true); - tegra_uart_dma_channel_free(tup, false); free_irq(u->irq, tup); } @@ -1070,6 +1225,7 @@ static void tegra_uart_set_termios(struct uart_port *u, struct clk *parent_clk = clk_get_parent(tup->uart_clk); unsigned long parent_clk_rate = clk_get_rate(parent_clk); int max_divider = (tup->cdata->support_clk_src_div) ? 0x7FFF : 0xFFFF; + int ret; max_divider *= 16; spin_lock_irqsave(&u->lock, flags); @@ -1142,7 +1298,11 @@ static void tegra_uart_set_termios(struct uart_port *u, parent_clk_rate/max_divider, parent_clk_rate/16); spin_unlock_irqrestore(&u->lock, flags); - tegra_set_baudrate(tup, baud); + ret = tegra_set_baudrate(tup, baud); + if (ret < 0) { + dev_err(tup->uport.dev, "Failed to set baud rate\n"); + return; + } if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); spin_lock_irqsave(&u->lock, flags); @@ -1210,6 +1370,11 @@ static int tegra_uart_parse_dt(struct platform_device *pdev, { struct device_node *np = pdev->dev.of_node; int port; + int ret; + int index; + u32 pval; + int count; + int n_entries; port = of_alias_get_id(np, "serial"); if (port < 0) { @@ -1220,6 +1385,54 @@ static int tegra_uart_parse_dt(struct platform_device *pdev, tup->enable_modem_interrupt = of_property_read_bool(np, "nvidia,enable-modem-interrupt"); + + index = of_property_match_string(np, "dma-names", "rx"); + if (index < 0) { + tup->use_rx_pio = true; + dev_info(&pdev->dev, "RX in PIO mode\n"); + } + index = of_property_match_string(np, "dma-names", "tx"); + if (index < 0) { + tup->use_tx_pio = true; + dev_info(&pdev->dev, "TX in PIO mode\n"); + } + + n_entries = of_property_count_u32_elems(np, "nvidia,adjust-baud-rates"); + if (n_entries > 0) { + tup->n_adjustable_baud_rates = n_entries / 3; + tup->baud_tolerance = + devm_kzalloc(&pdev->dev, (tup->n_adjustable_baud_rates) * + sizeof(*tup->baud_tolerance), GFP_KERNEL); + if (!tup->baud_tolerance) + return -ENOMEM; + for (count = 0, index = 0; count < n_entries; count += 3, + index++) { + ret = + of_property_read_u32_index(np, + "nvidia,adjust-baud-rates", + count, &pval); + if (!ret) + tup->baud_tolerance[index].lower_range_baud = + pval; + ret = + of_property_read_u32_index(np, + "nvidia,adjust-baud-rates", + count + 1, &pval); + if (!ret) + tup->baud_tolerance[index].upper_range_baud = + pval; + ret = + of_property_read_u32_index(np, + "nvidia,adjust-baud-rates", + count + 2, &pval); + if (!ret) + tup->baud_tolerance[index].tolerance = + (s32)pval; + } + } else { + tup->n_adjustable_baud_rates = 0; + } + return 0; } @@ -1227,12 +1440,44 @@ static struct tegra_uart_chip_data tegra20_uart_chip_data = { .tx_fifo_full_status = false, .allow_txfifo_reset_fifo_mode = true, .support_clk_src_div = false, + .fifo_mode_enable_status = false, + .uart_max_port = 5, + .max_dma_burst_bytes = 4, + .error_tolerance_low_range = -4, + .error_tolerance_high_range = 4, }; static struct tegra_uart_chip_data tegra30_uart_chip_data = { .tx_fifo_full_status = true, .allow_txfifo_reset_fifo_mode = false, .support_clk_src_div = true, + .fifo_mode_enable_status = false, + .uart_max_port = 5, + .max_dma_burst_bytes = 4, + .error_tolerance_low_range = -4, + .error_tolerance_high_range = 4, +}; + +static struct tegra_uart_chip_data tegra186_uart_chip_data = { + .tx_fifo_full_status = true, + .allow_txfifo_reset_fifo_mode = false, + .support_clk_src_div = true, + .fifo_mode_enable_status = true, + .uart_max_port = 8, + .max_dma_burst_bytes = 8, + .error_tolerance_low_range = 0, + .error_tolerance_high_range = 4, +}; + +static struct tegra_uart_chip_data tegra194_uart_chip_data = { + .tx_fifo_full_status = true, + .allow_txfifo_reset_fifo_mode = false, + .support_clk_src_div = true, + .fifo_mode_enable_status = true, + .uart_max_port = 8, + .max_dma_burst_bytes = 8, + .error_tolerance_low_range = -2, + .error_tolerance_high_range = 2, }; static const struct of_device_id tegra_uart_of_match[] = { @@ -1243,6 +1488,12 @@ static const struct of_device_id tegra_uart_of_match[] = { .compatible = "nvidia,tegra20-hsuart", .data = &tegra20_uart_chip_data, }, { + .compatible = "nvidia,tegra186-hsuart", + .data = &tegra186_uart_chip_data, + }, { + .compatible = "nvidia,tegra194-hsuart", + .data = &tegra194_uart_chip_data, + }, { }, }; MODULE_DEVICE_TABLE(of, tegra_uart_of_match); @@ -1364,11 +1615,22 @@ static struct platform_driver tegra_uart_platform_driver = { static int __init tegra_uart_init(void) { int ret; + struct device_node *node; + const struct of_device_id *match = NULL; + const struct tegra_uart_chip_data *cdata = NULL; + + node = of_find_matching_node(NULL, tegra_uart_of_match); + if (node) + match = of_match_node(tegra_uart_of_match, node); + if (match) + cdata = match->data; + if (cdata) + tegra_uart_driver.nr = cdata->uart_max_port; ret = uart_register_driver(&tegra_uart_driver); if (ret < 0) { pr_err("Could not register %s driver\n", - tegra_uart_driver.driver_name); + tegra_uart_driver.driver_name); return ret; } |