Merging upstream version 4.19.260.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 62 insertions, 24 deletions

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index c73d0eddd..cc9d1f416 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -140,12 +140,15 @@ static void dw8250_check_lcr(struct uart_port *p, int value)
 /* Returns once the transmitter is empty or we run out of retries */
 static void dw8250_tx_wait_empty(struct uart_port *p)
 {
+	struct uart_8250_port *up = up_to_u8250p(p);
 	unsigned int tries = 20000;
 	unsigned int delay_threshold = tries - 1000;
 	unsigned int lsr;
 
 	while (tries--) {
 		lsr = readb (p->membase + (UART_LSR << p->regshift));
+		up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+
 		if (lsr & UART_LSR_TEMT)
 			break;
 
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 5a2e67a8d..f11d12025 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2917,8 +2917,10 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
 	case UPIO_MEM32BE:
 	case UPIO_MEM16:
 	case UPIO_MEM:
-		if (!port->mapbase)
+		if (!port->mapbase) {
+			ret = -EINVAL;
 			break;
+		}
 
 		if (!request_mem_region(port->mapbase, size, "serial")) {
 			ret = -EBUSY;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 5edc3813a..7de4bed1d 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1335,6 +1335,15 @@ static void pl011_stop_rx(struct uart_port *port)
 	pl011_dma_rx_stop(uap);
 }
 
+static void pl011_throttle_rx(struct uart_port *port)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	pl011_stop_rx(port);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
 static void pl011_enable_ms(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
@@ -1728,9 +1737,10 @@ static int pl011_allocate_irq(struct uart_amba_port *uap)
  */
 static void pl011_enable_interrupts(struct uart_amba_port *uap)
 {
+	unsigned long flags;
 	unsigned int i;
 
-	spin_lock_irq(&uap->port.lock);
+	spin_lock_irqsave(&uap->port.lock, flags);
 
 	/* Clear out any spuriously appearing RX interrupts */
 	pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
@@ -1752,7 +1762,14 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
 	if (!pl011_dma_rx_running(uap))
 		uap->im |= UART011_RXIM;
 	pl011_write(uap->im, uap, REG_IMSC);
-	spin_unlock_irq(&uap->port.lock);
+	spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+static void pl011_unthrottle_rx(struct uart_port *port)
+{
+	struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port);
+
+	pl011_enable_interrupts(uap);
 }
 
 static int pl011_startup(struct uart_port *port)
@@ -2127,6 +2144,8 @@ static const struct uart_ops amba_pl011_pops = {
 	.stop_tx	= pl011_stop_tx,
 	.start_tx	= pl011_start_tx,
 	.stop_rx	= pl011_stop_rx,
+	.throttle	= pl011_throttle_rx,
+	.unthrottle	= pl011_unthrottle_rx,
 	.enable_ms	= pl011_enable_ms,
 	.break_ctl	= pl011_break_ctl,
 	.startup	= pl011_startup,
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index b757fd1bd..069d02354 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1102,9 +1102,9 @@ static int lpuart_config_rs485(struct uart_port *port,
 		 * Note: UART is assumed to be active high.
 		 */
 		if (rs485->flags & SER_RS485_RTS_ON_SEND)
-			modem &= ~UARTMODEM_TXRTSPOL;
-		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
 			modem |= UARTMODEM_TXRTSPOL;
+		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+			modem &= ~UARTMODEM_TXRTSPOL;
 	}
 
 	/* Store the new configuration */
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index d1d732615..9c145ed0d 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -341,7 +341,7 @@ static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id)
 		       LPC32XX_HSUART_IIR(port->membase));
 		port->icount.overrun++;
 		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
-		tty_schedule_flip(tport);
+		tty_flip_buffer_push(tport);
 	}
 
 	/* Data received? */
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 77f3f3728..70f74ebc2 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -237,6 +237,7 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
 	struct tty_port *tport = &port->state->port;
 	unsigned char ch = 0;
 	char flag = 0;
+	int ret;
 
 	do {
 		if (status & STAT_RX_RDY(port)) {
@@ -249,6 +250,16 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
 				port->icount.parity++;
 		}
 
+		/*
+		 * For UART2, error bits are not cleared on buffer read.
+		 * This causes interrupt loop and system hang.
+		 */
+		if (IS_EXTENDED(port) && (status & STAT_BRK_ERR)) {
+			ret = readl(port->membase + UART_STAT);
+			ret |= STAT_BRK_ERR;
+			writel(ret, port->membase + UART_STAT);
+		}
+
 		if (status & STAT_BRK_DET) {
 			port->icount.brk++;
 			status &= ~(STAT_FRM_ERR | STAT_PAR_ERR);
@@ -442,14 +453,14 @@ static void mvebu_uart_shutdown(struct uart_port *port)
 	}
 }
 
-static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
+static unsigned int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
 {
 	struct mvebu_uart *mvuart = to_mvuart(port);
 	unsigned int d_divisor, m_divisor;
 	u32 brdv;
 
 	if (IS_ERR(mvuart->clk))
-		return -PTR_ERR(mvuart->clk);
+		return 0;
 
 	/*
 	 * The baudrate is derived from the UART clock thanks to two divisors:
@@ -469,7 +480,7 @@ static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
 	brdv |= d_divisor;
 	writel(brdv, port->membase + UART_BRDV);
 
-	return 0;
+	return DIV_ROUND_CLOSEST(port->uartclk, d_divisor * m_divisor);
 }
 
 static void mvebu_uart_set_termios(struct uart_port *port,
@@ -506,15 +517,11 @@ static void mvebu_uart_set_termios(struct uart_port *port,
 	max_baud = 230400;
 
 	baud = uart_get_baud_rate(port, termios, old, min_baud, max_baud);
-	if (mvebu_uart_baud_rate_set(port, baud)) {
-		/* No clock available, baudrate cannot be changed */
-		if (old)
-			baud = uart_get_baud_rate(port, old, NULL,
-						  min_baud, max_baud);
-	} else {
-		tty_termios_encode_baud_rate(termios, baud, baud);
-		uart_update_timeout(port, termios->c_cflag, baud);
-	}
+	baud = mvebu_uart_baud_rate_set(port, baud);
+
+	/* In case baudrate cannot be changed, report previous old value */
+	if (baud == 0 && old)
+		baud = tty_termios_baud_rate(old);
 
 	/* Only the following flag changes are supported */
 	if (old) {
@@ -525,6 +532,11 @@ static void mvebu_uart_set_termios(struct uart_port *port,
 		termios->c_cflag |= CS8;
 	}
 
+	if (baud != 0) {
+		tty_termios_encode_baud_rate(termios, baud, baud);
+		uart_update_timeout(port, termios->c_cflag, baud);
+	}
+
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 49661cef5..964d6d33b 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -238,8 +238,7 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
 	/* Enable tx dma mode */
 	ucon = rd_regl(port, S3C2410_UCON);
 	ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
-	ucon |= (dma_get_cache_alignment() >= 16) ?
-		S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
+	ucon |= S3C64XX_UCON_TXBURST_1;
 	ucon |= S3C64XX_UCON_TXMODE_DMA;
 	wr_regl(port,  S3C2410_UCON, ucon);
 
@@ -512,7 +511,7 @@ static void enable_rx_dma(struct s3c24xx_uart_port *ourport)
 			S3C64XX_UCON_DMASUS_EN |
 			S3C64XX_UCON_TIMEOUT_EN |
 			S3C64XX_UCON_RXMODE_MASK);
-	ucon |= S3C64XX_UCON_RXBURST_16 |
+	ucon |= S3C64XX_UCON_RXBURST_1 |
 			0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
 			S3C64XX_UCON_EMPTYINT_EN |
 			S3C64XX_UCON_TIMEOUT_EN |
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index af2a29cfb..ee480a148 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -398,7 +398,7 @@ static void tegra_uart_tx_dma_complete(void *args)
 	count = tup->tx_bytes_requested - state.residue;
 	async_tx_ack(tup->tx_dma_desc);
 	spin_lock_irqsave(&tup->uport.lock, flags);
-	xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+	uart_xmit_advance(&tup->uport, count);
 	tup->tx_in_progress = 0;
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(&tup->uport);
@@ -482,7 +482,6 @@ static unsigned int tegra_uart_tx_empty(struct uart_port *u)
 static void tegra_uart_stop_tx(struct uart_port *u)
 {
 	struct tegra_uart_port *tup = to_tegra_uport(u);
-	struct circ_buf *xmit = &tup->uport.state->xmit;
 	struct dma_tx_state state;
 	unsigned int count;
 
@@ -493,7 +492,7 @@ static void tegra_uart_stop_tx(struct uart_port *u)
 	dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
 	count = tup->tx_bytes_requested - state.residue;
 	async_tx_ack(tup->tx_dma_desc);
-	xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+	uart_xmit_advance(&tup->uport, count);
 	tup->tx_in_progress = 0;
 }
 
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index bb2f6f02c..d8e1b0356 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -72,6 +72,8 @@ static void stm32_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE,
 	*cr3 |= USART_CR3_DEM;
 	over8 = *cr1 & USART_CR1_OVER8;
 
+	*cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK);
+
 	if (over8)
 		rs485_deat_dedt = delay_ADE * baud * 8;
 	else
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 2b6376e6e..eb0d3f552 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1141,6 +1141,8 @@ static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l)
 		/* No compatible property, so try the name. */
 		soc_string = np->name;
 
+	of_node_put(np);
+
 	/* Extract the SOC number from the "PowerPC," string */
 	if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc)
 		return 0;