Adding upstream version 4.19.304.upstream/4.19.304upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

20 files changed, 397 insertions, 69 deletions

diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index db048dbe9..6fec20c01 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -3648,7 +3648,7 @@ static int cy_pci_probe(struct pci_dev *pdev,
 	struct cyclades_card *card;
 	void __iomem *addr0 = NULL, *addr2 = NULL;
 	char *card_name = NULL;
-	u32 uninitialized_var(mailbox);
+	u32 mailbox;
 	unsigned int device_id, nchan = 0, card_no, i, j;
 	unsigned char plx_ver;
 	int retval, irq;
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 59d85bdd1..c89f93ff0 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -587,7 +587,7 @@ static int __init xen_hvc_init(void)
 		ops = &dom0_hvc_ops;
 		r = xen_initial_domain_console_init();
 		if (r < 0)
-			return r;
+			goto register_fe;
 		info = vtermno_to_xencons(HVC_COOKIE);
 	} else {
 		ops = &domU_hvc_ops;
@@ -596,7 +596,7 @@ static int __init xen_hvc_init(void)
 		else
 			r = xen_pv_console_init();
 		if (r < 0)
-			return r;
+			goto register_fe;
 
 		info = vtermno_to_xencons(HVC_COOKIE);
 		info->irq = bind_evtchn_to_irq_lateeoi(info->evtchn);
@@ -621,6 +621,7 @@ static int __init xen_hvc_init(void)
 	}
 
 	r = 0;
+ register_fe:
 #ifdef CONFIG_HVC_XEN_FRONTEND
 	r = xenbus_register_frontend(&xencons_driver);
 #endif
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index 8d96e8696..274480a3c 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -1537,7 +1537,7 @@ static unsigned int card_count;
 static int isicom_probe(struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
-	unsigned int uninitialized_var(signature), index;
+	unsigned int signature, index;
 	int retval = -EPERM;
 	struct isi_board *board = NULL;
 
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 8c8aa3b9c..b0c5f0dba 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -85,7 +85,6 @@ struct serial8250_config {
 #define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
 #define UART_BUG_NOMSR	(1 << 2)	/* UART has buggy MSR status bits (Au1x00) */
 #define UART_BUG_THRE	(1 << 3)	/* UART has buggy THRE reassertion */
-#define UART_BUG_PARITY	(1 << 4)	/* UART mishandles parity if FIFO enabled */
 
 
 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
new file mode 100644
index 000000000..1cf229cca
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Synopsys DesignWare 8250 library. */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+
+#include "8250_dwlib.h"
+
+/* Offsets for the DesignWare specific registers */
+#define DW_UART_DLF	0xc0 /* Divisor Latch Fraction Register */
+#define DW_UART_CPR	0xf4 /* Component Parameter Register */
+#define DW_UART_UCV	0xf8 /* UART Component Version */
+
+/* Component Parameter Register bits */
+#define DW_UART_CPR_ABP_DATA_WIDTH	(3 << 0)
+#define DW_UART_CPR_AFCE_MODE		(1 << 4)
+#define DW_UART_CPR_THRE_MODE		(1 << 5)
+#define DW_UART_CPR_SIR_MODE		(1 << 6)
+#define DW_UART_CPR_SIR_LP_MODE		(1 << 7)
+#define DW_UART_CPR_ADDITIONAL_FEATURES	(1 << 8)
+#define DW_UART_CPR_FIFO_ACCESS		(1 << 9)
+#define DW_UART_CPR_FIFO_STAT		(1 << 10)
+#define DW_UART_CPR_SHADOW		(1 << 11)
+#define DW_UART_CPR_ENCODED_PARMS	(1 << 12)
+#define DW_UART_CPR_DMA_EXTRA		(1 << 13)
+#define DW_UART_CPR_FIFO_MODE		(0xff << 16)
+
+/* Helper for FIFO size calculation */
+#define DW_UART_CPR_FIFO_SIZE(a)	(((a >> 16) & 0xff) * 16)
+
+static inline u32 dw8250_readl_ext(struct uart_port *p, int offset)
+{
+	if (p->iotype == UPIO_MEM32BE)
+		return ioread32be(p->membase + offset);
+	return readl(p->membase + offset);
+}
+
+static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg)
+{
+	if (p->iotype == UPIO_MEM32BE)
+		iowrite32be(reg, p->membase + offset);
+	else
+		writel(reg, p->membase + offset);
+}
+
+/*
+ * divisor = div(I) + div(F)
+ * "I" means integer, "F" means fractional
+ * quot = div(I) = clk / (16 * baud)
+ * frac = div(F) * 2^dlf_size
+ *
+ * let rem = clk % (16 * baud)
+ * we have: div(F) * (16 * baud) = rem
+ * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud)
+ */
+static unsigned int dw8250_get_divisor(struct uart_port *p, unsigned int baud,
+				       unsigned int *frac)
+{
+	unsigned int quot, rem, base_baud = baud * 16;
+	struct dw8250_port_data *d = p->private_data;
+
+	quot = p->uartclk / base_baud;
+	rem = p->uartclk % base_baud;
+	*frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud);
+
+	return quot;
+}
+
+static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
+			       unsigned int quot, unsigned int quot_frac)
+{
+	dw8250_writel_ext(p, DW_UART_DLF, quot_frac);
+	serial8250_do_set_divisor(p, baud, quot, quot_frac);
+}
+
+void dw8250_setup_port(struct uart_port *p)
+{
+	struct uart_8250_port *up = up_to_u8250p(p);
+	u32 reg, old_dlf;
+
+	/*
+	 * If the Component Version Register returns zero, we know that
+	 * ADDITIONAL_FEATURES are not enabled. No need to go any further.
+	 */
+	reg = dw8250_readl_ext(p, DW_UART_UCV);
+	if (!reg)
+		return;
+
+	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
+		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
+
+	/* Preserve value written by firmware or bootloader  */
+	old_dlf = dw8250_readl_ext(p, DW_UART_DLF);
+	dw8250_writel_ext(p, DW_UART_DLF, ~0U);
+	reg = dw8250_readl_ext(p, DW_UART_DLF);
+	dw8250_writel_ext(p, DW_UART_DLF, old_dlf);
+
+	if (reg) {
+		struct dw8250_port_data *d = p->private_data;
+
+		d->dlf_size = fls(reg);
+		p->get_divisor = dw8250_get_divisor;
+		p->set_divisor = dw8250_set_divisor;
+	}
+
+	reg = dw8250_readl_ext(p, DW_UART_CPR);
+	if (!reg)
+		return;
+
+	/* Select the type based on FIFO */
+	if (reg & DW_UART_CPR_FIFO_MODE) {
+		p->type = PORT_16550A;
+		p->flags |= UPF_FIXED_TYPE;
+		p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
+		up->capabilities = UART_CAP_FIFO;
+	}
+
+	if (reg & DW_UART_CPR_AFCE_MODE)
+		up->capabilities |= UART_CAP_AFE;
+
+	if (reg & DW_UART_CPR_SIR_MODE)
+		up->capabilities |= UART_CAP_IRDA;
+}
+EXPORT_SYMBOL_GPL(dw8250_setup_port);
diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h
new file mode 100644
index 000000000..87a4db2a8
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_dwlib.h
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Synopsys DesignWare 8250 library header file. */
+
+#include <linux/types.h>
+
+#include "8250.h"
+
+struct dw8250_port_data {
+	/* Port properties */
+	int			line;
+
+	/* DMA operations */
+	struct uart_8250_dma	dma;
+
+	/* Hardware configuration */
+	u8			dlf_size;
+};
+
+void dw8250_setup_port(struct uart_port *p);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 5cd8c36c8..2acaea5f3 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -176,6 +176,7 @@ static int __init early_omap8250_setup(struct earlycon_device *device,
 OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup);
 OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
 OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
+OF_EARLYCON_DECLARE(omap8250, "ti,am654-uart", early_omap8250_setup);
 
 #endif
 
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 274e644f3..d05b155b4 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1049,14 +1049,6 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev)
 	return number_uarts;
 }
 
-static int pci_asix_setup(struct serial_private *priv,
-		  const struct pciserial_board *board,
-		  struct uart_8250_port *port, int idx)
-{
-	port->bugs |= UART_BUG_PARITY;
-	return pci_default_setup(priv, board, port, idx);
-}
-
 /* Quatech devices have their own extra interface features */
 
 struct quatech_feature {
@@ -1683,7 +1675,6 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_WCH_CH355_4S	0x7173
 #define PCI_VENDOR_ID_AGESTAR		0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375	0x6872
-#define PCI_VENDOR_ID_ASIX		0x9710
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
 #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
 
@@ -2455,16 +2446,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.setup          = pci_wch_ch38x_setup,
 	},
 	/*
-	 * ASIX devices with FIFO bug
-	 */
-	{
-		.vendor		= PCI_VENDOR_ID_ASIX,
-		.device		= PCI_ANY_ID,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_asix_setup,
-	},
-	/*
 	 * Broadcom TruManage (NetXtreme)
 	 */
 	{
@@ -4791,6 +4772,12 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		pbn_b1_bt_1_115200 },
 
 	/*
+	 * IntaShield IS-100
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0D60,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_1_115200 },
+	/*
 	 * IntaShield IS-200
 	 */
 	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
@@ -4817,10 +4804,14 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_1_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AA2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_1_115200 },
 	/*
-	 * Brainboxes UC-257
+	 * Brainboxes UC-253/UC-734
 	 */
-	{	PCI_VENDOR_ID_INTASHIELD, 0x0861,
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0CA1,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_2_115200 },
@@ -4856,6 +4847,14 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x08E2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x08E3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
 	/*
 	 * Brainboxes UC-310
 	 */
@@ -4866,6 +4865,14 @@ static const struct pci_device_id serial_pci_tbl[] = {
 	/*
 	 * Brainboxes UC-313
 	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x08A1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{       PCI_VENDOR_ID_INTASHIELD, 0x08A2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
 	{       PCI_VENDOR_ID_INTASHIELD, 0x08A3,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
@@ -4880,6 +4887,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
 	/*
 	 * Brainboxes UC-346
 	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B01,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
 	{	PCI_VENDOR_ID_INTASHIELD, 0x0B02,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
@@ -4891,6 +4902,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0A82,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
 	{	PCI_VENDOR_ID_INTASHIELD, 0x0A83,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
@@ -4903,13 +4918,95 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		0, 0,
 		pbn_b2_4_115200 },
 	/*
-	 * Brainboxes UC-420/431
+	 * Brainboxes UC-420
 	 */
 	{       PCI_VENDOR_ID_INTASHIELD, 0x0921,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_4_115200 },
 	/*
+	 * Brainboxes UC-607
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x09A1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x09A2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x09A3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-836
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0D41,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
+	/*
+	 * Brainboxes UP-189
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AC1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AC2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AC3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UP-200
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B21,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B22,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B23,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UP-869
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C01,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C02,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C03,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UP-880
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C21,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C22,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C23,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
 	 * Perle PCI-RAS cards
 	 */
 	{       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index cba4888bc..7f5d51de6 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1910,7 +1910,10 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 		skip_rx = true;
 
 	if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) {
-		if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
+		struct irq_data *d;
+
+		d = irq_get_irq_data(port->irq);
+		if (d && irqd_is_wakeup_set(d))
 			pm_wakeup_event(tport->tty->dev, 0);
 		if (!up->dma || handle_rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
@@ -2617,11 +2620,8 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
 
 	if (c_cflag & CSTOPB)
 		cval |= UART_LCR_STOP;
-	if (c_cflag & PARENB) {
+	if (c_cflag & PARENB)
 		cval |= UART_LCR_PARITY;
-		if (up->bugs & UART_BUG_PARITY)
-			up->fifo_bug = true;
-	}
 	if (!(c_cflag & PARODD))
 		cval |= UART_LCR_EPAR;
 #ifdef CMSPAR
@@ -2735,8 +2735,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	up->lcr = cval;					/* Save computed LCR */
 
 	if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
-		/* NOTE: If fifo_bug is not set, a user can set RX_trigger. */
-		if ((baud < 2400 && !up->dma) || up->fifo_bug) {
+		if (baud < 2400 && !up->dma) {
 			up->fcr &= ~UART_FCR_TRIGGER_MASK;
 			up->fcr |= UART_FCR_TRIGGER_1;
 		}
@@ -3072,8 +3071,7 @@ static int do_set_rxtrig(struct tty_port *port, unsigned char bytes)
 	struct uart_8250_port *up = up_to_u8250p(uport);
 	int rxtrig;
 
-	if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1 ||
-	    up->fifo_bug)
+	if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1)
 		return -EINVAL;
 
 	rxtrig = bytes_to_fcr_rxtrig(up, bytes);
@@ -3229,6 +3227,7 @@ void serial8250_init_port(struct uart_8250_port *up)
 	struct uart_port *port = &up->port;
 
 	spin_lock_init(&port->lock);
+	port->pm = NULL;
 	port->ops = &serial8250_pops;
 
 	up->cur_iotype = 0xFF;
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index a9ddd76d4..733ac3209 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -312,6 +312,9 @@ config SERIAL_8250_RSA
 
 	  If you don't have such card, or if unsure, say N.
 
+config SERIAL_8250_DWLIB
+	bool
+
 config SERIAL_8250_ACORN
 	tristate "Acorn expansion card serial port support"
 	depends on ARCH_ACORN && SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 18751bc63..9b451d815 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_SERIAL_8250)		+= 8250.o 8250_base.o
 8250-$(CONFIG_SERIAL_8250_PNP)		+= 8250_pnp.o
 8250_base-y				:= 8250_port.o
 8250_base-$(CONFIG_SERIAL_8250_DMA)	+= 8250_dma.o
+8250_base-$(CONFIG_SERIAL_8250_DWLIB)	+= 8250_dwlib.o
 8250_base-$(CONFIG_SERIAL_8250_FINTEK)	+= 8250_fintek.o
 obj-$(CONFIG_SERIAL_8250_GSC)		+= 8250_gsc.o
 obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 50c4058a0..1688c190f 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -791,11 +791,11 @@ static void atmel_complete_tx_dma(void *arg)
 
 	port->icount.tx += atmel_port->tx_len;
 
-	spin_lock_irq(&atmel_port->lock_tx);
+	spin_lock(&atmel_port->lock_tx);
 	async_tx_ack(atmel_port->desc_tx);
 	atmel_port->cookie_tx = -EINVAL;
 	atmel_port->desc_tx = NULL;
-	spin_unlock_irq(&atmel_port->lock_tx);
+	spin_unlock(&atmel_port->lock_tx);
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index ad40c75bb..375d4790e 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1269,19 +1269,14 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 {
 	struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
 	unsigned long flags;
-	int nolock = oops_in_progress;
 
-	if (unlikely(nolock)) {
+	if (unlikely(oops_in_progress)) {
 		local_irq_save(flags);
-	} else {
-		spin_lock_irqsave(&pinfo->port.lock, flags);
-	}
-
-	cpm_uart_early_write(pinfo, s, count, true);
-
-	if (unlikely(nolock)) {
+		cpm_uart_early_write(pinfo, s, count, true);
 		local_irq_restore(flags);
 	} else {
+		spin_lock_irqsave(&pinfo->port.lock, flags);
+		cpm_uart_early_write(pinfo, s, count, true);
 		spin_unlock_irqrestore(&pinfo->port.lock, flags);
 	}
 }
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 36321d810..af23d41b9 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2136,6 +2136,8 @@ static int __init lpuart32_imx_early_console_setup(struct earlycon_device *devic
 OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup);
 OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup);
 OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup);
+OF_EARLYCON_DECLARE(lpuart32, "fsl,imx8ulp-lpuart", lpuart32_imx_early_console_setup);
+OF_EARLYCON_DECLARE(lpuart32, "fsl,imx8qxp-lpuart", lpuart32_imx_early_console_setup);
 EARLYCON_DECLARE(lpuart, lpuart_early_console_setup);
 EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup);
 
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 1838d0be3..adb0bbcec 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -72,7 +72,8 @@
 #define AML_UART_BAUD_USE		BIT(23)
 #define AML_UART_BAUD_XTAL		BIT(24)
 
-#define AML_UART_PORT_NUM		6
+#define AML_UART_PORT_NUM		12
+#define AML_UART_PORT_OFFSET		6
 #define AML_UART_DEV_NAME		"ttyAML"
 
 
@@ -370,10 +371,14 @@ static void meson_uart_set_termios(struct uart_port *port,
 	else
 		val |= AML_UART_STOP_BIT_1SB;
 
-	if (cflags & CRTSCTS)
-		val &= ~AML_UART_TWO_WIRE_EN;
-	else
+	if (cflags & CRTSCTS) {
+		if (port->flags & UPF_HARD_FLOW)
+			val &= ~AML_UART_TWO_WIRE_EN;
+		else
+			termios->c_cflag &= ~CRTSCTS;
+	} else {
 		val |= AML_UART_TWO_WIRE_EN;
+	}
 
 	writel(val, port->membase + AML_UART_CONTROL);
 
@@ -664,13 +669,27 @@ static int meson_uart_probe_clocks(struct platform_device *pdev,
 
 static int meson_uart_probe(struct platform_device *pdev)
 {
-	struct resource *res_mem, *res_irq;
+	struct resource *res_mem;
 	struct uart_port *port;
+	u32 fifosize = 64; /* Default is 64, 128 for EE UART_0 */
 	int ret = 0;
+	int irq;
+	bool has_rtscts;
 
 	if (pdev->dev.of_node)
 		pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
 
+	if (pdev->id < 0) {
+		int id;
+
+		for (id = AML_UART_PORT_OFFSET; id < AML_UART_PORT_NUM; id++) {
+			if (!meson_ports[id]) {
+				pdev->id = id;
+				break;
+			}
+		}
+	}
+
 	if (pdev->id < 0 || pdev->id >= AML_UART_PORT_NUM)
 		return -EINVAL;
 
@@ -678,9 +697,12 @@ static int meson_uart_probe(struct platform_device *pdev)
 	if (!res_mem)
 		return -ENODEV;
 
-	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res_irq)
-		return -ENODEV;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	of_property_read_u32(pdev->dev.of_node, "fifo-size", &fifosize);
+	has_rtscts = of_property_read_bool(pdev->dev.of_node, "uart-has-rtscts");
 
 	if (meson_ports[pdev->id]) {
 		dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);
@@ -703,14 +725,16 @@ static int meson_uart_probe(struct platform_device *pdev)
 	port->iotype = UPIO_MEM;
 	port->mapbase = res_mem->start;
 	port->mapsize = resource_size(res_mem);
-	port->irq = res_irq->start;
+	port->irq = irq;
 	port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY;
+	if (has_rtscts)
+		port->flags |= UPF_HARD_FLOW;
 	port->dev = &pdev->dev;
 	port->line = pdev->id;
 	port->type = PORT_MESON;
 	port->x_char = 0;
 	port->ops = &meson_uart_ops;
-	port->fifosize = 64;
+	port->fifosize = fifosize;
 
 	meson_ports[pdev->id] = port;
 	platform_set_drvdata(pdev, port);
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 964d6d33b..5f1f52cc6 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1199,8 +1199,12 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
 			continue;
 
 		rate = clk_get_rate(clk);
-		if (!rate)
+		if (!rate) {
+			dev_err(ourport->port.dev,
+				"Failed to get clock rate for %s.\n", clkname);
+			clk_put(clk);
 			continue;
+		}
 
 		if (ourport->info->has_divslot) {
 			unsigned long div = rate / req_baud;
@@ -1226,10 +1230,18 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
 			calc_deviation = -calc_deviation;
 
 		if (calc_deviation < deviation) {
+			/*
+			 * If we find a better clk, release the previous one, if
+			 * any.
+			 */
+			if (!IS_ERR(*best_clk))
+				clk_put(*best_clk);
 			*best_clk = clk;
 			best_quot = quot;
 			*clk_num = cnt;
 			deviation = calc_deviation;
+		} else {
+			clk_put(clk);
 		}
 	}
 
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index ebea4a9d8..c65f9194a 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -694,6 +694,18 @@ static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
 		case SC16IS7XX_IIR_RTOI_SRC:
 		case SC16IS7XX_IIR_XOFFI_SRC:
 			rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG);
+
+			/*
+			 * There is a silicon bug that makes the chip report a
+			 * time-out interrupt but no data in the FIFO. This is
+			 * described in errata section 18.1.4.
+			 *
+			 * When this happens, read one byte from the FIFO to
+			 * clear the interrupt.
+			 */
+			if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen)
+				rxlen = 1;
+
 			if (rxlen)
 				sc16is7xx_handle_rx(port, rxlen, iir);
 			break;
@@ -1166,9 +1178,18 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
 		state |= BIT(offset);
 	else
 		state &= ~BIT(offset);
-	sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
+
+	/*
+	 * If we write IOSTATE first, and then IODIR, the output value is not
+	 * transferred to the corresponding I/O pin.
+	 * The datasheet states that each register bit will be transferred to
+	 * the corresponding I/O pin programmed as output when writing to
+	 * IOSTATE. Therefore, configure direction first with IODIR, and then
+	 * set value after with IOSTATE.
+	 */
 	sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset),
 			      BIT(offset));
+	sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
 
 	return 0;
 }
@@ -1255,6 +1276,13 @@ static int sc16is7xx_probe(struct device *dev,
 		s->p[i].port.type	= PORT_SC16IS7XX;
 		s->p[i].port.fifosize	= SC16IS7XX_FIFO_SIZE;
 		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
+		s->p[i].port.iobase	= i;
+		/*
+		 * Use all ones as membase to make sure uart_configure_port() in
+		 * serial_core.c does not abort for SPI/I2C devices where the
+		 * membase address is not applicable.
+		 */
+		s->p[i].port.membase	= (void __iomem *)~0;
 		s->p[i].port.iotype	= UPIO_PORT;
 		s->p[i].port.uartclk	= freq;
 		s->p[i].port.rs485_config = sc16is7xx_config_rs485;
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 41fe45f23..a30f7ed12 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -944,7 +944,11 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	tup->ier_shadow = 0;
 	tup->current_baud = 0;
 
-	clk_prepare_enable(tup->uart_clk);
+	ret = clk_prepare_enable(tup->uart_clk);
+	if (ret) {
+		dev_err(tup->uport.dev, "could not enable clk\n");
+		return ret;
+	}
 
 	/* Reset the UART controller to clear all previous status.*/
 	reset_control_assert(tup->rst);
diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c
index ffcab80ba..73fdd55c6 100644
--- a/drivers/tty/tty_jobctrl.c
+++ b/drivers/tty/tty_jobctrl.c
@@ -290,12 +290,7 @@ void disassociate_ctty(int on_exit)
 		return;
 	}
 
-	spin_lock_irq(&current->sighand->siglock);
-	put_pid(current->signal->tty_old_pgrp);
-	current->signal->tty_old_pgrp = NULL;
-	tty = tty_kref_get(current->signal->tty);
-	spin_unlock_irq(&current->sighand->siglock);
-
+	tty = get_current_tty();
 	if (tty) {
 		unsigned long flags;
 
@@ -310,6 +305,16 @@ void disassociate_ctty(int on_exit)
 		tty_kref_put(tty);
 	}
 
+	/* If tty->ctrl.pgrp is not NULL, it may be assigned to
+	 * current->signal->tty_old_pgrp in a race condition, and
+	 * cause pid memleak. Release current->signal->tty_old_pgrp
+	 * after tty->ctrl.pgrp set to NULL.
+	 */
+	spin_lock_irq(&current->sighand->siglock);
+	put_pid(current->signal->tty_old_pgrp);
+	current->signal->tty_old_pgrp = NULL;
+	spin_unlock_irq(&current->sighand->siglock);
+
 	/* Now clear signal->tty under the lock */
 	read_lock(&tasklist_lock);
 	session_clear_tty(task_session(current));
diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c
index 10a832a21..31ecba113 100644
--- a/drivers/tty/vcc.c
+++ b/drivers/tty/vcc.c
@@ -586,18 +586,22 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 		return -ENOMEM;
 
 	name = kstrdup(dev_name(&vdev->dev), GFP_KERNEL);
+	if (!name) {
+		rv = -ENOMEM;
+		goto free_port;
+	}
 
 	rv = vio_driver_init(&port->vio, vdev, VDEV_CONSOLE_CON, vcc_versions,
 			     ARRAY_SIZE(vcc_versions), NULL, name);
 	if (rv)
-		goto free_port;
+		goto free_name;
 
 	port->vio.debug = vcc_dbg_vio;
 	vcc_ldc_cfg.debug = vcc_dbg_ldc;
 
 	rv = vio_ldc_alloc(&port->vio, &vcc_ldc_cfg, port);
 	if (rv)
-		goto free_port;
+		goto free_name;
 
 	spin_lock_init(&port->lock);
 
@@ -631,6 +635,11 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 		goto unreg_tty;
 	}
 	port->domain = kstrdup(domain, GFP_KERNEL);
+	if (!port->domain) {
+		rv = -ENOMEM;
+		goto unreg_tty;
+	}
+
 
 	mdesc_release(hp);
 
@@ -660,8 +669,9 @@ free_table:
 	vcc_table_remove(port->index);
 free_ldc:
 	vio_ldc_free(&port->vio);
-free_port:
+free_name:
 	kfree(name);
+free_port:
 	kfree(port);
 
 	return rv;