Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1339 insertions, 0 deletions

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
new file mode 100644
index 000000000..c13f9a153
--- /dev/null
+++ b/drivers/usb/chipidea/core.c
@@ -0,0 +1,1339 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * core.c - ChipIdea USB IP core family device controller
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ */
+
+/*
+ * Description: ChipIdea USB IP core family device controller
+ *
+ * This driver is composed of several blocks:
+ * - HW:     hardware interface
+ * - DBG:    debug facilities (optional)
+ * - UTIL:   utilities
+ * - ISR:    interrupts handling
+ * - ENDPT:  endpoint operations (Gadget API)
+ * - GADGET: gadget operations (Gadget API)
+ * - BUS:    bus glue code, bus abstraction layer
+ *
+ * Compile Options
+ * - STALL_IN:  non-empty bulk-in pipes cannot be halted
+ *              if defined mass storage compliance succeeds but with warnings
+ *              => case 4: Hi >  Dn
+ *              => case 5: Hi >  Di
+ *              => case 8: Hi <> Do
+ *              if undefined usbtest 13 fails
+ * - TRACE:     enable function tracing (depends on DEBUG)
+ *
+ * Main Features
+ * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
+ * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
+ * - Normal & LPM support
+ *
+ * USBTEST Report
+ * - OK: 0-12, 13 (STALL_IN defined) & 14
+ * - Not Supported: 15 & 16 (ISO)
+ *
+ * TODO List
+ * - Suspend & Remote Wakeup
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/extcon.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/chipidea.h>
+#include <linux/usb/of.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/ehci_def.h>
+
+#include "ci.h"
+#include "udc.h"
+#include "bits.h"
+#include "host.h"
+#include "otg.h"
+#include "otg_fsm.h"
+
+/* Controller register map */
+static const u8 ci_regs_nolpm[] = {
+	[CAP_CAPLENGTH]		= 0x00U,
+	[CAP_HCCPARAMS]		= 0x08U,
+	[CAP_DCCPARAMS]		= 0x24U,
+	[CAP_TESTMODE]		= 0x38U,
+	[OP_USBCMD]		= 0x00U,
+	[OP_USBSTS]		= 0x04U,
+	[OP_USBINTR]		= 0x08U,
+	[OP_DEVICEADDR]		= 0x14U,
+	[OP_ENDPTLISTADDR]	= 0x18U,
+	[OP_TTCTRL]		= 0x1CU,
+	[OP_BURSTSIZE]		= 0x20U,
+	[OP_ULPI_VIEWPORT]	= 0x30U,
+	[OP_PORTSC]		= 0x44U,
+	[OP_DEVLC]		= 0x84U,
+	[OP_OTGSC]		= 0x64U,
+	[OP_USBMODE]		= 0x68U,
+	[OP_ENDPTSETUPSTAT]	= 0x6CU,
+	[OP_ENDPTPRIME]		= 0x70U,
+	[OP_ENDPTFLUSH]		= 0x74U,
+	[OP_ENDPTSTAT]		= 0x78U,
+	[OP_ENDPTCOMPLETE]	= 0x7CU,
+	[OP_ENDPTCTRL]		= 0x80U,
+};
+
+static const u8 ci_regs_lpm[] = {
+	[CAP_CAPLENGTH]		= 0x00U,
+	[CAP_HCCPARAMS]		= 0x08U,
+	[CAP_DCCPARAMS]		= 0x24U,
+	[CAP_TESTMODE]		= 0xFCU,
+	[OP_USBCMD]		= 0x00U,
+	[OP_USBSTS]		= 0x04U,
+	[OP_USBINTR]		= 0x08U,
+	[OP_DEVICEADDR]		= 0x14U,
+	[OP_ENDPTLISTADDR]	= 0x18U,
+	[OP_TTCTRL]		= 0x1CU,
+	[OP_BURSTSIZE]		= 0x20U,
+	[OP_ULPI_VIEWPORT]	= 0x30U,
+	[OP_PORTSC]		= 0x44U,
+	[OP_DEVLC]		= 0x84U,
+	[OP_OTGSC]		= 0xC4U,
+	[OP_USBMODE]		= 0xC8U,
+	[OP_ENDPTSETUPSTAT]	= 0xD8U,
+	[OP_ENDPTPRIME]		= 0xDCU,
+	[OP_ENDPTFLUSH]		= 0xE0U,
+	[OP_ENDPTSTAT]		= 0xE4U,
+	[OP_ENDPTCOMPLETE]	= 0xE8U,
+	[OP_ENDPTCTRL]		= 0xECU,
+};
+
+static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
+{
+	int i;
+
+	for (i = 0; i < OP_ENDPTCTRL; i++)
+		ci->hw_bank.regmap[i] =
+			(i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
+			(is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
+
+	for (; i <= OP_LAST; i++)
+		ci->hw_bank.regmap[i] = ci->hw_bank.op +
+			4 * (i - OP_ENDPTCTRL) +
+			(is_lpm
+			 ? ci_regs_lpm[OP_ENDPTCTRL]
+			 : ci_regs_nolpm[OP_ENDPTCTRL]);
+
+}
+
+static enum ci_revision ci_get_revision(struct ci_hdrc *ci)
+{
+	int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION);
+	enum ci_revision rev = CI_REVISION_UNKNOWN;
+
+	if (ver == 0x2) {
+		rev = hw_read_id_reg(ci, ID_ID, REVISION)
+			>> __ffs(REVISION);
+		rev += CI_REVISION_20;
+	} else if (ver == 0x0) {
+		rev = CI_REVISION_1X;
+	}
+
+	return rev;
+}
+
+/**
+ * hw_read_intr_enable: returns interrupt enable register
+ *
+ * @ci: the controller
+ *
+ * This function returns register data
+ */
+u32 hw_read_intr_enable(struct ci_hdrc *ci)
+{
+	return hw_read(ci, OP_USBINTR, ~0);
+}
+
+/**
+ * hw_read_intr_status: returns interrupt status register
+ *
+ * @ci: the controller
+ *
+ * This function returns register data
+ */
+u32 hw_read_intr_status(struct ci_hdrc *ci)
+{
+	return hw_read(ci, OP_USBSTS, ~0);
+}
+
+/**
+ * hw_port_test_set: writes port test mode (execute without interruption)
+ * @mode: new value
+ *
+ * This function returns an error code
+ */
+int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
+{
+	const u8 TEST_MODE_MAX = 7;
+
+	if (mode > TEST_MODE_MAX)
+		return -EINVAL;
+
+	hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
+	return 0;
+}
+
+/**
+ * hw_port_test_get: reads port test mode value
+ *
+ * @ci: the controller
+ *
+ * This function returns port test mode value
+ */
+u8 hw_port_test_get(struct ci_hdrc *ci)
+{
+	return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
+}
+
+static void hw_wait_phy_stable(void)
+{
+	/*
+	 * The phy needs some delay to output the stable status from low
+	 * power mode. And for OTGSC, the status inputs are debounced
+	 * using a 1 ms time constant, so, delay 2ms for controller to get
+	 * the stable status, like vbus and id when the phy leaves low power.
+	 */
+	usleep_range(2000, 2500);
+}
+
+/* The PHY enters/leaves low power mode */
+static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
+{
+	enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC;
+	bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm)));
+
+	if (enable && !lpm)
+		hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
+				PORTSC_PHCD(ci->hw_bank.lpm));
+	else if (!enable && lpm)
+		hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
+				0);
+}
+
+static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
+{
+	u32 reg;
+
+	/* bank is a module variable */
+	ci->hw_bank.abs = base;
+
+	ci->hw_bank.cap = ci->hw_bank.abs;
+	ci->hw_bank.cap += ci->platdata->capoffset;
+	ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
+
+	hw_alloc_regmap(ci, false);
+	reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
+		__ffs(HCCPARAMS_LEN);
+	ci->hw_bank.lpm  = reg;
+	if (reg)
+		hw_alloc_regmap(ci, !!reg);
+	ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
+	ci->hw_bank.size += OP_LAST;
+	ci->hw_bank.size /= sizeof(u32);
+
+	reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
+		__ffs(DCCPARAMS_DEN);
+	ci->hw_ep_max = reg * 2;   /* cache hw ENDPT_MAX */
+
+	if (ci->hw_ep_max > ENDPT_MAX)
+		return -ENODEV;
+
+	ci_hdrc_enter_lpm(ci, false);
+
+	/* Disable all interrupts bits */
+	hw_write(ci, OP_USBINTR, 0xffffffff, 0);
+
+	/* Clear all interrupts status bits*/
+	hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
+
+	ci->rev = ci_get_revision(ci);
+
+	dev_dbg(ci->dev,
+		"ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n",
+		ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
+
+	/* setup lock mode ? */
+
+	/* ENDPTSETUPSTAT is '0' by default */
+
+	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
+
+	return 0;
+}
+
+void hw_phymode_configure(struct ci_hdrc *ci)
+{
+	u32 portsc, lpm, sts = 0;
+
+	switch (ci->platdata->phy_mode) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+		portsc = PORTSC_PTS(PTS_UTMI);
+		lpm = DEVLC_PTS(PTS_UTMI);
+		break;
+	case USBPHY_INTERFACE_MODE_UTMIW:
+		portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
+		lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
+		break;
+	case USBPHY_INTERFACE_MODE_ULPI:
+		portsc = PORTSC_PTS(PTS_ULPI);
+		lpm = DEVLC_PTS(PTS_ULPI);
+		break;
+	case USBPHY_INTERFACE_MODE_SERIAL:
+		portsc = PORTSC_PTS(PTS_SERIAL);
+		lpm = DEVLC_PTS(PTS_SERIAL);
+		sts = 1;
+		break;
+	case USBPHY_INTERFACE_MODE_HSIC:
+		portsc = PORTSC_PTS(PTS_HSIC);
+		lpm = DEVLC_PTS(PTS_HSIC);
+		break;
+	default:
+		return;
+	}
+
+	if (ci->hw_bank.lpm) {
+		hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
+		if (sts)
+			hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS);
+	} else {
+		hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
+		if (sts)
+			hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
+	}
+}
+EXPORT_SYMBOL_GPL(hw_phymode_configure);
+
+/**
+ * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy
+ * interfaces
+ * @ci: the controller
+ *
+ * This function returns an error code if the phy failed to init
+ */
+static int _ci_usb_phy_init(struct ci_hdrc *ci)
+{
+	int ret;
+
+	if (ci->phy) {
+		ret = phy_init(ci->phy);
+		if (ret)
+			return ret;
+
+		ret = phy_power_on(ci->phy);
+		if (ret) {
+			phy_exit(ci->phy);
+			return ret;
+		}
+	} else {
+		ret = usb_phy_init(ci->usb_phy);
+	}
+
+	return ret;
+}
+
+/**
+ * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy
+ * interfaces
+ * @ci: the controller
+ */
+static void ci_usb_phy_exit(struct ci_hdrc *ci)
+{
+	if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
+		return;
+
+	if (ci->phy) {
+		phy_power_off(ci->phy);
+		phy_exit(ci->phy);
+	} else {
+		usb_phy_shutdown(ci->usb_phy);
+	}
+}
+
+/**
+ * ci_usb_phy_init: initialize phy according to different phy type
+ * @ci: the controller
+ *
+ * This function returns an error code if usb_phy_init has failed
+ */
+static int ci_usb_phy_init(struct ci_hdrc *ci)
+{
+	int ret;
+
+	if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
+		return 0;
+
+	switch (ci->platdata->phy_mode) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+	case USBPHY_INTERFACE_MODE_UTMIW:
+	case USBPHY_INTERFACE_MODE_HSIC:
+		ret = _ci_usb_phy_init(ci);
+		if (!ret)
+			hw_wait_phy_stable();
+		else
+			return ret;
+		hw_phymode_configure(ci);
+		break;
+	case USBPHY_INTERFACE_MODE_ULPI:
+	case USBPHY_INTERFACE_MODE_SERIAL:
+		hw_phymode_configure(ci);
+		ret = _ci_usb_phy_init(ci);
+		if (ret)
+			return ret;
+		break;
+	default:
+		ret = _ci_usb_phy_init(ci);
+		if (!ret)
+			hw_wait_phy_stable();
+	}
+
+	return ret;
+}
+
+
+/**
+ * ci_platform_configure: do controller configure
+ * @ci: the controller
+ *
+ */
+void ci_platform_configure(struct ci_hdrc *ci)
+{
+	bool is_device_mode, is_host_mode;
+
+	is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
+	is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
+
+	if (is_device_mode) {
+		phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE);
+
+		if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING)
+			hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
+				 USBMODE_CI_SDIS);
+	}
+
+	if (is_host_mode) {
+		phy_set_mode(ci->phy, PHY_MODE_USB_HOST);
+
+		if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING)
+			hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
+				 USBMODE_CI_SDIS);
+	}
+
+	if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
+		if (ci->hw_bank.lpm)
+			hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
+		else
+			hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
+	}
+
+	if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA)
+		hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA);
+
+	hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16);
+
+	if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST)
+		hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK,
+			ci->platdata->ahb_burst_config);
+
+	/* override burst size, take effect only when ahb_burst_config is 0 */
+	if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) {
+		if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST)
+			hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK,
+			ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK));
+
+		if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST)
+			hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK,
+				ci->platdata->rx_burst_size);
+	}
+}
+
+/**
+ * hw_controller_reset: do controller reset
+ * @ci: the controller
+  *
+ * This function returns an error code
+ */
+static int hw_controller_reset(struct ci_hdrc *ci)
+{
+	int count = 0;
+
+	hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
+	while (hw_read(ci, OP_USBCMD, USBCMD_RST)) {
+		udelay(10);
+		if (count++ > 1000)
+			return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+/**
+ * hw_device_reset: resets chip (execute without interruption)
+ * @ci: the controller
+ *
+ * This function returns an error code
+ */
+int hw_device_reset(struct ci_hdrc *ci)
+{
+	int ret;
+
+	/* should flush & stop before reset */
+	hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
+	hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+
+	ret = hw_controller_reset(ci);
+	if (ret) {
+		dev_err(ci->dev, "error resetting controller, ret=%d\n", ret);
+		return ret;
+	}
+
+	if (ci->platdata->notify_event) {
+		ret = ci->platdata->notify_event(ci,
+			CI_HDRC_CONTROLLER_RESET_EVENT);
+		if (ret)
+			return ret;
+	}
+
+	/* USBMODE should be configured step by step */
+	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
+	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC);
+	/* HW >= 2.3 */
+	hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
+
+	if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) {
+		pr_err("cannot enter in %s device mode", ci_role(ci)->name);
+		pr_err("lpm = %i", ci->hw_bank.lpm);
+		return -ENODEV;
+	}
+
+	ci_platform_configure(ci);
+
+	return 0;
+}
+
+static irqreturn_t ci_irq_handler(int irq, void *data)
+{
+	struct ci_hdrc *ci = data;
+	irqreturn_t ret = IRQ_NONE;
+	u32 otgsc = 0;
+
+	if (ci->in_lpm) {
+		disable_irq_nosync(irq);
+		ci->wakeup_int = true;
+		pm_runtime_get(ci->dev);
+		return IRQ_HANDLED;
+	}
+
+	if (ci->is_otg) {
+		otgsc = hw_read_otgsc(ci, ~0);
+		if (ci_otg_is_fsm_mode(ci)) {
+			ret = ci_otg_fsm_irq(ci);
+			if (ret == IRQ_HANDLED)
+				return ret;
+		}
+	}
+
+	/*
+	 * Handle id change interrupt, it indicates device/host function
+	 * switch.
+	 */
+	if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
+		ci->id_event = true;
+		/* Clear ID change irq status */
+		hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS);
+		ci_otg_queue_work(ci);
+		return IRQ_HANDLED;
+	}
+
+	/*
+	 * Handle vbus change interrupt, it indicates device connection
+	 * and disconnection events.
+	 */
+	if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
+		ci->b_sess_valid_event = true;
+		/* Clear BSV irq */
+		hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS);
+		ci_otg_queue_work(ci);
+		return IRQ_HANDLED;
+	}
+
+	/* Handle device/host interrupt */
+	if (ci->role != CI_ROLE_END)
+		ret = ci_role(ci)->irq(ci);
+
+	return ret;
+}
+
+static void ci_irq(struct ci_hdrc *ci)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ci_irq_handler(ci->irq, ci);
+	local_irq_restore(flags);
+}
+
+static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
+			     void *ptr)
+{
+	struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb);
+	struct ci_hdrc *ci = cbl->ci;
+
+	cbl->connected = event;
+	cbl->changed = true;
+
+	ci_irq(ci);
+	return NOTIFY_DONE;
+}
+
+static int ci_get_platdata(struct device *dev,
+		struct ci_hdrc_platform_data *platdata)
+{
+	struct extcon_dev *ext_vbus, *ext_id;
+	struct ci_hdrc_cable *cable;
+	int ret;
+
+	if (!platdata->phy_mode)
+		platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
+
+	if (!platdata->dr_mode)
+		platdata->dr_mode = usb_get_dr_mode(dev);
+
+	if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
+		platdata->dr_mode = USB_DR_MODE_OTG;
+
+	if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) {
+		/* Get the vbus regulator */
+		platdata->reg_vbus = devm_regulator_get(dev, "vbus");
+		if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
+			return -EPROBE_DEFER;
+		} else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
+			/* no vbus regulator is needed */
+			platdata->reg_vbus = NULL;
+		} else if (IS_ERR(platdata->reg_vbus)) {
+			dev_err(dev, "Getting regulator error: %ld\n",
+				PTR_ERR(platdata->reg_vbus));
+			return PTR_ERR(platdata->reg_vbus);
+		}
+		/* Get TPL support */
+		if (!platdata->tpl_support)
+			platdata->tpl_support =
+				of_usb_host_tpl_support(dev->of_node);
+	}
+
+	if (platdata->dr_mode == USB_DR_MODE_OTG) {
+		/* We can support HNP and SRP of OTG 2.0 */
+		platdata->ci_otg_caps.otg_rev = 0x0200;
+		platdata->ci_otg_caps.hnp_support = true;
+		platdata->ci_otg_caps.srp_support = true;
+
+		/* Update otg capabilities by DT properties */
+		ret = of_usb_update_otg_caps(dev->of_node,
+					&platdata->ci_otg_caps);
+		if (ret)
+			return ret;
+	}
+
+	if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
+		platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
+
+	of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
+				     &platdata->phy_clkgate_delay_us);
+
+	platdata->itc_setting = 1;
+
+	of_property_read_u32(dev->of_node, "itc-setting",
+					&platdata->itc_setting);
+
+	ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
+				&platdata->ahb_burst_config);
+	if (!ret) {
+		platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST;
+	} else if (ret != -EINVAL) {
+		dev_err(dev, "failed to get ahb-burst-config\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
+				&platdata->tx_burst_size);
+	if (!ret) {
+		platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST;
+	} else if (ret != -EINVAL) {
+		dev_err(dev, "failed to get tx-burst-size-dword\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
+				&platdata->rx_burst_size);
+	if (!ret) {
+		platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
+	} else if (ret != -EINVAL) {
+		dev_err(dev, "failed to get rx-burst-size-dword\n");
+		return ret;
+	}
+
+	if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL))
+		platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA;
+
+	ext_id = ERR_PTR(-ENODEV);
+	ext_vbus = ERR_PTR(-ENODEV);
+	if (of_property_read_bool(dev->of_node, "extcon")) {
+		/* Each one of them is not mandatory */
+		ext_vbus = extcon_get_edev_by_phandle(dev, 0);
+		if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
+			return PTR_ERR(ext_vbus);
+
+		ext_id = extcon_get_edev_by_phandle(dev, 1);
+		if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
+			return PTR_ERR(ext_id);
+	}
+
+	cable = &platdata->vbus_extcon;
+	cable->nb.notifier_call = ci_cable_notifier;
+	cable->edev = ext_vbus;
+
+	if (!IS_ERR(ext_vbus)) {
+		ret = extcon_get_state(cable->edev, EXTCON_USB);
+		if (ret)
+			cable->connected = true;
+		else
+			cable->connected = false;
+	}
+
+	cable = &platdata->id_extcon;
+	cable->nb.notifier_call = ci_cable_notifier;
+	cable->edev = ext_id;
+
+	if (!IS_ERR(ext_id)) {
+		ret = extcon_get_state(cable->edev, EXTCON_USB_HOST);
+		if (ret)
+			cable->connected = true;
+		else
+			cable->connected = false;
+	}
+	return 0;
+}
+
+static int ci_extcon_register(struct ci_hdrc *ci)
+{
+	struct ci_hdrc_cable *id, *vbus;
+	int ret;
+
+	id = &ci->platdata->id_extcon;
+	id->ci = ci;
+	if (!IS_ERR_OR_NULL(id->edev)) {
+		ret = devm_extcon_register_notifier(ci->dev, id->edev,
+						EXTCON_USB_HOST, &id->nb);
+		if (ret < 0) {
+			dev_err(ci->dev, "register ID failed\n");
+			return ret;
+		}
+	}
+
+	vbus = &ci->platdata->vbus_extcon;
+	vbus->ci = ci;
+	if (!IS_ERR_OR_NULL(vbus->edev)) {
+		ret = devm_extcon_register_notifier(ci->dev, vbus->edev,
+						EXTCON_USB, &vbus->nb);
+		if (ret < 0) {
+			dev_err(ci->dev, "register VBUS failed\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static DEFINE_IDA(ci_ida);
+
+struct platform_device *ci_hdrc_add_device(struct device *dev,
+			struct resource *res, int nres,
+			struct ci_hdrc_platform_data *platdata)
+{
+	struct platform_device *pdev;
+	int id, ret;
+
+	ret = ci_get_platdata(dev, platdata);
+	if (ret)
+		return ERR_PTR(ret);
+
+	id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
+	if (id < 0)
+		return ERR_PTR(id);
+
+	pdev = platform_device_alloc("ci_hdrc", id);
+	if (!pdev) {
+		ret = -ENOMEM;
+		goto put_id;
+	}
+
+	pdev->dev.parent = dev;
+
+	ret = platform_device_add_resources(pdev, res, nres);
+	if (ret)
+		goto err;
+
+	ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
+	if (ret)
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto err;
+
+	return pdev;
+
+err:
+	platform_device_put(pdev);
+put_id:
+	ida_simple_remove(&ci_ida, id);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
+
+void ci_hdrc_remove_device(struct platform_device *pdev)
+{
+	int id = pdev->id;
+	platform_device_unregister(pdev);
+	ida_simple_remove(&ci_ida, id);
+}
+EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
+
+static inline void ci_role_destroy(struct ci_hdrc *ci)
+{
+	ci_hdrc_gadget_destroy(ci);
+	ci_hdrc_host_destroy(ci);
+	if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
+		ci_hdrc_otg_destroy(ci);
+}
+
+static void ci_get_otg_capable(struct ci_hdrc *ci)
+{
+	if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
+		ci->is_otg = false;
+	else
+		ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
+				DCCPARAMS_DC | DCCPARAMS_HC)
+					== (DCCPARAMS_DC | DCCPARAMS_HC));
+	if (ci->is_otg) {
+		dev_dbg(ci->dev, "It is OTG capable controller\n");
+		/* Disable and clear all OTG irq */
+		hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
+							OTGSC_INT_STATUS_BITS);
+	}
+}
+
+static ssize_t role_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+	if (ci->role != CI_ROLE_END)
+		return sprintf(buf, "%s\n", ci_role(ci)->name);
+
+	return 0;
+}
+
+static ssize_t role_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t n)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	enum ci_role role;
+	int ret;
+
+	if (!(ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET])) {
+		dev_warn(dev, "Current configuration is not dual-role, quit\n");
+		return -EPERM;
+	}
+
+	for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++)
+		if (!strncmp(buf, ci->roles[role]->name,
+			     strlen(ci->roles[role]->name)))
+			break;
+
+	if (role == CI_ROLE_END || role == ci->role)
+		return -EINVAL;
+
+	pm_runtime_get_sync(dev);
+	disable_irq(ci->irq);
+	ci_role_stop(ci);
+	ret = ci_role_start(ci, role);
+	if (!ret && ci->role == CI_ROLE_GADGET)
+		ci_handle_vbus_change(ci);
+	enable_irq(ci->irq);
+	pm_runtime_put_sync(dev);
+
+	return (ret == 0) ? n : ret;
+}
+static DEVICE_ATTR_RW(role);
+
+static struct attribute *ci_attrs[] = {
+	&dev_attr_role.attr,
+	NULL,
+};
+
+static const struct attribute_group ci_attr_group = {
+	.attrs = ci_attrs,
+};
+
+static int ci_hdrc_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	struct ci_hdrc	*ci;
+	struct resource	*res;
+	void __iomem	*base;
+	int		ret;
+	enum usb_dr_mode dr_mode;
+
+	if (!dev_get_platdata(dev)) {
+		dev_err(dev, "platform data missing\n");
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
+	if (!ci)
+		return -ENOMEM;
+
+	spin_lock_init(&ci->lock);
+	ci->dev = dev;
+	ci->platdata = dev_get_platdata(dev);
+	ci->imx28_write_fix = !!(ci->platdata->flags &
+		CI_HDRC_IMX28_WRITE_FIX);
+	ci->supports_runtime_pm = !!(ci->platdata->flags &
+		CI_HDRC_SUPPORTS_RUNTIME_PM);
+	platform_set_drvdata(pdev, ci);
+
+	ret = hw_device_init(ci, base);
+	if (ret < 0) {
+		dev_err(dev, "can't initialize hardware\n");
+		return -ENODEV;
+	}
+
+	ret = ci_ulpi_init(ci);
+	if (ret)
+		return ret;
+
+	if (ci->platdata->phy) {
+		ci->phy = ci->platdata->phy;
+	} else if (ci->platdata->usb_phy) {
+		ci->usb_phy = ci->platdata->usb_phy;
+	} else {
+		ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent, "phys",
+							  0);
+		ci->phy = devm_phy_get(dev->parent, "usb-phy");
+
+		/* Fallback to grabbing any registered USB2 PHY */
+		if (IS_ERR(ci->usb_phy) &&
+		    PTR_ERR(ci->usb_phy) != -EPROBE_DEFER)
+			ci->usb_phy = devm_usb_get_phy(dev->parent,
+						       USB_PHY_TYPE_USB2);
+
+		/* if both generic PHY and USB PHY layers aren't enabled */
+		if (PTR_ERR(ci->phy) == -ENOSYS &&
+				PTR_ERR(ci->usb_phy) == -ENXIO) {
+			ret = -ENXIO;
+			goto ulpi_exit;
+		}
+
+		if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) {
+			ret = -EPROBE_DEFER;
+			goto ulpi_exit;
+		}
+
+		if (IS_ERR(ci->phy))
+			ci->phy = NULL;
+		else if (IS_ERR(ci->usb_phy))
+			ci->usb_phy = NULL;
+	}
+
+	ret = ci_usb_phy_init(ci);
+	if (ret) {
+		dev_err(dev, "unable to init phy: %d\n", ret);
+		return ret;
+	}
+
+	ci->hw_bank.phys = res->start;
+
+	ci->irq = platform_get_irq(pdev, 0);
+	if (ci->irq < 0) {
+		dev_err(dev, "missing IRQ\n");
+		ret = ci->irq;
+		goto deinit_phy;
+	}
+
+	ci_get_otg_capable(ci);
+
+	dr_mode = ci->platdata->dr_mode;
+	/* initialize role(s) before the interrupt is requested */
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+		ret = ci_hdrc_host_init(ci);
+		if (ret) {
+			if (ret == -ENXIO)
+				dev_info(dev, "doesn't support host\n");
+			else
+				goto deinit_phy;
+		}
+	}
+
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+		ret = ci_hdrc_gadget_init(ci);
+		if (ret) {
+			if (ret == -ENXIO)
+				dev_info(dev, "doesn't support gadget\n");
+			else
+				goto deinit_host;
+		}
+	}
+
+	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
+		dev_err(dev, "no supported roles\n");
+		ret = -ENODEV;
+		goto deinit_gadget;
+	}
+
+	if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
+		ret = ci_hdrc_otg_init(ci);
+		if (ret) {
+			dev_err(dev, "init otg fails, ret = %d\n", ret);
+			goto deinit_gadget;
+		}
+	}
+
+	if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
+		if (ci->is_otg) {
+			ci->role = ci_otg_role(ci);
+			/* Enable ID change irq */
+			hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
+		} else {
+			/*
+			 * If the controller is not OTG capable, but support
+			 * role switch, the defalt role is gadget, and the
+			 * user can switch it through debugfs.
+			 */
+			ci->role = CI_ROLE_GADGET;
+		}
+	} else {
+		ci->role = ci->roles[CI_ROLE_HOST]
+			? CI_ROLE_HOST
+			: CI_ROLE_GADGET;
+	}
+
+	if (!ci_otg_is_fsm_mode(ci)) {
+		/* only update vbus status for peripheral */
+		if (ci->role == CI_ROLE_GADGET)
+			ci_handle_vbus_change(ci);
+
+		ret = ci_role_start(ci, ci->role);
+		if (ret) {
+			dev_err(dev, "can't start %s role\n",
+						ci_role(ci)->name);
+			goto stop;
+		}
+	}
+
+	ret = devm_request_irq(dev, ci->irq, ci_irq_handler, IRQF_SHARED,
+			ci->platdata->name, ci);
+	if (ret)
+		goto stop;
+
+	ret = ci_extcon_register(ci);
+	if (ret)
+		goto stop;
+
+	if (ci->supports_runtime_pm) {
+		pm_runtime_set_active(&pdev->dev);
+		pm_runtime_enable(&pdev->dev);
+		pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
+		pm_runtime_mark_last_busy(ci->dev);
+		pm_runtime_use_autosuspend(&pdev->dev);
+	}
+
+	if (ci_otg_is_fsm_mode(ci))
+		ci_hdrc_otg_fsm_start(ci);
+
+	device_set_wakeup_capable(&pdev->dev, true);
+	dbg_create_files(ci);
+
+	ret = sysfs_create_group(&dev->kobj, &ci_attr_group);
+	if (ret)
+		goto remove_debug;
+
+	return 0;
+
+remove_debug:
+	dbg_remove_files(ci);
+stop:
+	if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
+		ci_hdrc_otg_destroy(ci);
+deinit_gadget:
+	ci_hdrc_gadget_destroy(ci);
+deinit_host:
+	ci_hdrc_host_destroy(ci);
+deinit_phy:
+	ci_usb_phy_exit(ci);
+ulpi_exit:
+	ci_ulpi_exit(ci);
+
+	return ret;
+}
+
+static int ci_hdrc_remove(struct platform_device *pdev)
+{
+	struct ci_hdrc *ci = platform_get_drvdata(pdev);
+
+	if (ci->supports_runtime_pm) {
+		pm_runtime_get_sync(&pdev->dev);
+		pm_runtime_disable(&pdev->dev);
+		pm_runtime_put_noidle(&pdev->dev);
+	}
+
+	dbg_remove_files(ci);
+	sysfs_remove_group(&ci->dev->kobj, &ci_attr_group);
+	ci_role_destroy(ci);
+	ci_hdrc_enter_lpm(ci, true);
+	ci_usb_phy_exit(ci);
+	ci_ulpi_exit(ci);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/* Prepare wakeup by SRP before suspend */
+static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
+{
+	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
+				!hw_read_otgsc(ci, OTGSC_ID)) {
+		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
+								PORTSC_PP);
+		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN,
+								PORTSC_WKCN);
+	}
+}
+
+/* Handle SRP when wakeup by data pulse */
+static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
+{
+	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
+		(ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
+		if (!hw_read_otgsc(ci, OTGSC_ID)) {
+			ci->fsm.a_srp_det = 1;
+			ci->fsm.a_bus_drop = 0;
+		} else {
+			ci->fsm.id = 1;
+		}
+		ci_otg_queue_work(ci);
+	}
+}
+
+static void ci_controller_suspend(struct ci_hdrc *ci)
+{
+	disable_irq(ci->irq);
+	ci_hdrc_enter_lpm(ci, true);
+	if (ci->platdata->phy_clkgate_delay_us)
+		usleep_range(ci->platdata->phy_clkgate_delay_us,
+			     ci->platdata->phy_clkgate_delay_us + 50);
+	usb_phy_set_suspend(ci->usb_phy, 1);
+	ci->in_lpm = true;
+	enable_irq(ci->irq);
+}
+
+/*
+ * Handle the wakeup interrupt triggered by extcon connector
+ * We need to call ci_irq again for extcon since the first
+ * interrupt (wakeup int) only let the controller be out of
+ * low power mode, but not handle any interrupts.
+ */
+static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
+{
+	struct ci_hdrc_cable *cable_id, *cable_vbus;
+	u32 otgsc = hw_read_otgsc(ci, ~0);
+
+	cable_id = &ci->platdata->id_extcon;
+	cable_vbus = &ci->platdata->vbus_extcon;
+
+	if (!IS_ERR(cable_id->edev) && ci->is_otg &&
+		(otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
+		ci_irq(ci);
+
+	if (!IS_ERR(cable_vbus->edev) && ci->is_otg &&
+		(otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
+		ci_irq(ci);
+}
+
+static int ci_controller_resume(struct device *dev)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "at %s\n", __func__);
+
+	if (!ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	ci_hdrc_enter_lpm(ci, false);
+
+	ret = ci_ulpi_resume(ci);
+	if (ret)
+		return ret;
+
+	if (ci->usb_phy) {
+		usb_phy_set_suspend(ci->usb_phy, 0);
+		usb_phy_set_wakeup(ci->usb_phy, false);
+		hw_wait_phy_stable();
+	}
+
+	ci->in_lpm = false;
+	if (ci->wakeup_int) {
+		ci->wakeup_int = false;
+		pm_runtime_mark_last_busy(ci->dev);
+		pm_runtime_put_autosuspend(ci->dev);
+		enable_irq(ci->irq);
+		if (ci_otg_is_fsm_mode(ci))
+			ci_otg_fsm_wakeup_by_srp(ci);
+		ci_extcon_wakeup_int(ci);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ci_suspend(struct device *dev)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+	if (ci->wq)
+		flush_workqueue(ci->wq);
+	/*
+	 * Controller needs to be active during suspend, otherwise the core
+	 * may run resume when the parent is at suspend if other driver's
+	 * suspend fails, it occurs before parent's suspend has not started,
+	 * but the core suspend has finished.
+	 */
+	if (ci->in_lpm)
+		pm_runtime_resume(dev);
+
+	if (ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	if (device_may_wakeup(dev)) {
+		if (ci_otg_is_fsm_mode(ci))
+			ci_otg_fsm_suspend_for_srp(ci);
+
+		usb_phy_set_wakeup(ci->usb_phy, true);
+		enable_irq_wake(ci->irq);
+	}
+
+	ci_controller_suspend(ci);
+
+	return 0;
+}
+
+static int ci_resume(struct device *dev)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	int ret;
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(ci->irq);
+
+	ret = ci_controller_resume(dev);
+	if (ret)
+		return ret;
+
+	if (ci->supports_runtime_pm) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static int ci_runtime_suspend(struct device *dev)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "at %s\n", __func__);
+
+	if (ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	if (ci_otg_is_fsm_mode(ci))
+		ci_otg_fsm_suspend_for_srp(ci);
+
+	usb_phy_set_wakeup(ci->usb_phy, true);
+	ci_controller_suspend(ci);
+
+	return 0;
+}
+
+static int ci_runtime_resume(struct device *dev)
+{
+	return ci_controller_resume(dev);
+}
+
+#endif /* CONFIG_PM */
+static const struct dev_pm_ops ci_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
+	SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
+};
+
+static struct platform_driver ci_hdrc_driver = {
+	.probe	= ci_hdrc_probe,
+	.remove	= ci_hdrc_remove,
+	.driver	= {
+		.name	= "ci_hdrc",
+		.pm	= &ci_pm_ops,
+	},
+};
+
+static int __init ci_hdrc_platform_register(void)
+{
+	ci_hdrc_host_driver_init();
+	return platform_driver_register(&ci_hdrc_driver);
+}
+module_init(ci_hdrc_platform_register);
+
+static void __exit ci_hdrc_platform_unregister(void)
+{
+	platform_driver_unregister(&ci_hdrc_driver);
+}
+module_exit(ci_hdrc_platform_unregister);
+
+MODULE_ALIAS("platform:ci_hdrc");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
+MODULE_DESCRIPTION("ChipIdea HDRC Driver");