Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 226 insertions, 0 deletions

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
new file mode 100644
index 000000000..57858f0c2
--- /dev/null
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * printer.c -- Printer gadget driver
+ *
+ * Copyright (C) 2003-2005 David Brownell
+ * Copyright (C) 2006 Craig W. Nadler
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <asm/byteorder.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/g_printer.h>
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+#define DRIVER_DESC		"Printer Gadget"
+#define DRIVER_VERSION		"2015 FEB 17"
+
+static const char shortname [] = "printer";
+static const char driver_desc [] = DRIVER_DESC;
+
+#include "u_printer.h"
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ */
+#define PRINTER_VENDOR_NUM	0x0525		/* NetChip */
+#define PRINTER_PRODUCT_NUM	0xa4a8		/* Linux-USB Printer Gadget */
+
+/* Some systems will want different product identifiers published in the
+ * device descriptor, either numbers or strings or both.  These string
+ * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+ */
+
+module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO);
+MODULE_PARM_DESC(iSerialNum, "1");
+
+static char *iPNPstring;
+module_param(iPNPstring, charp, S_IRUGO);
+MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
+
+/* Number of requests to allocate per endpoint, not used for ep0. */
+static unsigned qlen = 10;
+module_param(qlen, uint, S_IRUGO|S_IWUSR);
+
+#define QLEN	qlen
+
+static struct usb_function_instance *fi_printer;
+static struct usb_function *f_printer;
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand.
+ */
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+	/* .bcdUSB = DYNAMIC */
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+	.idVendor =		cpu_to_le16(PRINTER_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(PRINTER_PRODUCT_NUM),
+	.bNumConfigurations =	1
+};
+
+static const struct usb_descriptor_header *otg_desc[2];
+
+/*-------------------------------------------------------------------------*/
+
+/* descriptors that are built on-demand */
+
+static char				product_desc [40] = DRIVER_DESC;
+static char				serial_num [40] = "1";
+static char				*pnp_string =
+	"MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;";
+
+/* static strings, in UTF-8 */
+static struct usb_string		strings [] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = product_desc,
+	[USB_GADGET_SERIAL_IDX].s =	serial_num,
+	{  }		/* end of list */
+};
+
+static struct usb_gadget_strings	stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+static struct usb_configuration printer_cfg_driver = {
+	.label			= "printer",
+	.bConfigurationValue	= 1,
+	.bmAttributes		= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+};
+
+static int printer_do_config(struct usb_configuration *c)
+{
+	struct usb_gadget	*gadget = c->cdev->gadget;
+	int			status = 0;
+
+	usb_ep_autoconfig_reset(gadget);
+
+	usb_gadget_set_selfpowered(gadget);
+
+	if (gadget_is_otg(gadget)) {
+		printer_cfg_driver.descriptors = otg_desc;
+		printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	f_printer = usb_get_function(fi_printer);
+	if (IS_ERR(f_printer))
+		return PTR_ERR(f_printer);
+
+	status = usb_add_function(c, f_printer);
+	if (status < 0)
+		usb_put_function(f_printer);
+
+	return status;
+}
+
+static int printer_bind(struct usb_composite_dev *cdev)
+{
+	struct f_printer_opts *opts;
+	int ret;
+
+	fi_printer = usb_get_function_instance("printer");
+	if (IS_ERR(fi_printer))
+		return PTR_ERR(fi_printer);
+
+	opts = container_of(fi_printer, struct f_printer_opts, func_inst);
+	opts->minor = 0;
+	opts->q_len = QLEN;
+	if (iPNPstring) {
+		opts->pnp_string = kstrdup(iPNPstring, GFP_KERNEL);
+		if (!opts->pnp_string) {
+			ret = -ENOMEM;
+			goto fail_put_func_inst;
+		}
+		opts->pnp_string_allocated = true;
+		/*
+		 * we don't free this memory in case of error
+		 * as printer cleanup func will do this for us
+		 */
+	} else {
+		opts->pnp_string = pnp_string;
+	}
+
+	ret = usb_string_ids_tab(cdev, strings);
+	if (ret < 0)
+		goto fail_put_func_inst;
+
+	device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id;
+	device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id;
+
+	if (gadget_is_otg(cdev->gadget) && !otg_desc[0]) {
+		struct usb_descriptor_header *usb_desc;
+
+		usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
+		if (!usb_desc) {
+			ret = -ENOMEM;
+			goto fail_put_func_inst;
+		}
+		usb_otg_descriptor_init(cdev->gadget, usb_desc);
+		otg_desc[0] = usb_desc;
+		otg_desc[1] = NULL;
+	}
+
+	ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config);
+	if (ret)
+		goto fail_free_otg_desc;
+
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	return ret;
+
+fail_free_otg_desc:
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+fail_put_func_inst:
+	usb_put_function_instance(fi_printer);
+	return ret;
+}
+
+static int printer_unbind(struct usb_composite_dev *cdev)
+{
+	usb_put_function(f_printer);
+	usb_put_function_instance(fi_printer);
+
+	kfree(otg_desc[0]);
+	otg_desc[0] = NULL;
+
+	return 0;
+}
+
+static struct usb_composite_driver printer_driver = {
+	.name           = shortname,
+	.dev            = &device_desc,
+	.strings        = dev_strings,
+	.max_speed      = USB_SPEED_SUPER,
+	.bind		= printer_bind,
+	.unbind		= printer_unbind,
+};
+
+module_usb_composite_driver(printer_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Craig Nadler");
+MODULE_LICENSE("GPL");