Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 707 insertions, 0 deletions

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
new file mode 100644
index 000000000..0a9fd2022
--- /dev/null
+++ b/drivers/usb/host/ehci-fsl.c
@@ -0,0 +1,707 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2005-2009 MontaVista Software, Inc.
+ * Copyright 2008,2012,2015      Freescale Semiconductor, Inc.
+ *
+ * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
+ * by Hunter Wu.
+ * Power Management support by Dave Liu <daveliu@freescale.com>,
+ * Jerry Huang <Chang-Ming.Huang@freescale.com> and
+ * Anton Vorontsov <avorontsov@ru.mvista.com>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/err.h>
+#include <linux/usb.h>
+#include <linux/usb/ehci_def.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include "ehci.h"
+#include "ehci-fsl.h"
+
+#define DRIVER_DESC "Freescale EHCI Host controller driver"
+#define DRV_NAME "ehci-fsl"
+
+static struct hc_driver __read_mostly fsl_ehci_hc_driver;
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+/*
+ * fsl_ehci_drv_probe - initialize FSL-based HCDs
+ * @pdev: USB Host Controller being probed
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller.
+ *
+ */
+static int fsl_ehci_drv_probe(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata;
+	struct usb_hcd *hcd;
+	struct resource *res;
+	int irq;
+	int retval;
+
+	pr_debug("initializing FSL-SOC USB Controller\n");
+
+	/* Need platform data for setup */
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev,
+			"No platform data for %s.\n", dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	/*
+	 * This is a host mode driver, verify that we're supposed to be
+	 * in host mode.
+	 */
+	if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
+	      (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
+	      (pdata->operating_mode == FSL_USB2_DR_OTG))) {
+		dev_err(&pdev->dev,
+			"Non Host Mode configured for %s. Wrong driver linked.\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no IRQ. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	hcd = __usb_create_hcd(&fsl_ehci_hc_driver, pdev->dev.parent,
+			       &pdev->dev, dev_name(&pdev->dev), NULL);
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hcd->regs)) {
+		retval = PTR_ERR(hcd->regs);
+		goto err2;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	pdata->regs = hcd->regs;
+
+	if (pdata->power_budget)
+		hcd->power_budget = pdata->power_budget;
+
+	/*
+	 * do platform specific init: check the clock, grab/config pins, etc.
+	 */
+	if (pdata->init && pdata->init(pdev)) {
+		retval = -ENODEV;
+		goto err2;
+	}
+
+	/* Enable USB controller, 83xx or 8536 */
+	if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
+		clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
+				CONTROL_REGISTER_W1C_MASK, 0x4);
+
+	/*
+	 * Enable UTMI phy and program PTS field in UTMI mode before asserting
+	 * controller reset for USB Controller version 2.5
+	 */
+	if (pdata->has_fsl_erratum_a007792) {
+		clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
+				CONTROL_REGISTER_W1C_MASK, CTRL_UTMI_PHY_EN);
+		writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1);
+	}
+
+	/* Don't need to set host mode here. It will be done by tdi_reset() */
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval != 0)
+		goto err2;
+	device_wakeup_enable(hcd->self.controller);
+
+#ifdef CONFIG_USB_OTG
+	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
+		struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+		hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
+		dev_dbg(&pdev->dev, "hcd=0x%p  ehci=0x%p, phy=0x%p\n",
+			hcd, ehci, hcd->usb_phy);
+
+		if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+			retval = otg_set_host(hcd->usb_phy->otg,
+					      &ehci_to_hcd(ehci)->self);
+			if (retval) {
+				usb_put_phy(hcd->usb_phy);
+				goto err2;
+			}
+		} else {
+			dev_err(&pdev->dev, "can't find phy\n");
+			retval = -ENODEV;
+			goto err2;
+		}
+
+		hcd->skip_phy_initialization = 1;
+	}
+#endif
+	return retval;
+
+      err2:
+	usb_put_hcd(hcd);
+      err1:
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
+	if (pdata->exit)
+		pdata->exit(pdev);
+	return retval;
+}
+
+static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
+			       enum fsl_usb2_phy_modes phy_mode,
+			       unsigned int port_offset)
+{
+	u32 portsc;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	void __iomem *non_ehci = hcd->regs;
+	struct device *dev = hcd->self.controller;
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
+
+	if (pdata->controller_ver < 0) {
+		dev_warn(hcd->self.controller, "Could not get controller version\n");
+		return -ENODEV;
+	}
+
+	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
+	portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
+
+	switch (phy_mode) {
+	case FSL_USB2_PHY_ULPI:
+		if (pdata->have_sysif_regs && pdata->controller_ver) {
+			/* controller version 1.6 or above */
+			clrbits32(non_ehci + FSL_SOC_USB_CTRL,
+				  CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
+			clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+					CONTROL_REGISTER_W1C_MASK,
+					ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
+		}
+		portsc |= PORT_PTS_ULPI;
+		break;
+	case FSL_USB2_PHY_SERIAL:
+		portsc |= PORT_PTS_SERIAL;
+		break;
+	case FSL_USB2_PHY_UTMI_WIDE:
+		portsc |= PORT_PTS_PTW;
+		/* fall through */
+	case FSL_USB2_PHY_UTMI:
+	case FSL_USB2_PHY_UTMI_DUAL:
+		if (pdata->have_sysif_regs && pdata->controller_ver) {
+			/* controller version 1.6 or above */
+			clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+					CONTROL_REGISTER_W1C_MASK, UTMI_PHY_EN);
+			mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
+						become stable - 10ms*/
+		}
+		/* enable UTMI PHY */
+		if (pdata->have_sysif_regs)
+			clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+					CONTROL_REGISTER_W1C_MASK,
+					CTRL_UTMI_PHY_EN);
+		portsc |= PORT_PTS_UTMI;
+		break;
+	case FSL_USB2_PHY_NONE:
+		break;
+	}
+
+	/*
+	 * check PHY_CLK_VALID to determine phy clock presence before writing
+	 * to portsc
+	 */
+	if (pdata->check_phy_clk_valid) {
+		if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) &
+		    PHY_CLK_VALID)) {
+			dev_warn(hcd->self.controller,
+				 "USB PHY clock invalid\n");
+			return -EINVAL;
+		}
+	}
+
+	ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
+
+	if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
+		clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+				CONTROL_REGISTER_W1C_MASK, USB_CTRL_USB_EN);
+
+	return 0;
+}
+
+static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
+{
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	struct fsl_usb2_platform_data *pdata;
+	void __iomem *non_ehci = hcd->regs;
+
+	pdata = dev_get_platdata(hcd->self.controller);
+
+	if (pdata->have_sysif_regs) {
+		/*
+		* Turn on cache snooping hardware, since some PowerPC platforms
+		* wholly rely on hardware to deal with cache coherent
+		*/
+
+		/* Setup Snooping for all the 4GB space */
+		/* SNOOP1 starts from 0x0, size 2G */
+		iowrite32be(0x0 | SNOOP_SIZE_2GB,
+			    non_ehci + FSL_SOC_USB_SNOOP1);
+		/* SNOOP2 starts from 0x80000000, size 2G */
+		iowrite32be(0x80000000 | SNOOP_SIZE_2GB,
+			    non_ehci + FSL_SOC_USB_SNOOP2);
+	}
+
+	/* Deal with USB erratum A-005275 */
+	if (pdata->has_fsl_erratum_a005275 == 1)
+		ehci->has_fsl_hs_errata = 1;
+
+	if (pdata->has_fsl_erratum_a005697 == 1)
+		ehci->has_fsl_susp_errata = 1;
+
+	if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
+			(pdata->operating_mode == FSL_USB2_DR_OTG))
+		if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
+			return -EINVAL;
+
+	if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
+		unsigned int chip, rev, svr;
+
+		svr = mfspr(SPRN_SVR);
+		chip = svr >> 16;
+		rev = (svr >> 4) & 0xf;
+
+		/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
+		if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
+			ehci->has_fsl_port_bug = 1;
+
+		if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
+			if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
+				return -EINVAL;
+
+		if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
+			if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
+				return -EINVAL;
+	}
+
+	if (pdata->have_sysif_regs) {
+#ifdef CONFIG_FSL_SOC_BOOKE
+		iowrite32be(0x00000008, non_ehci + FSL_SOC_USB_PRICTRL);
+		iowrite32be(0x00000080, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
+#else
+		iowrite32be(0x0000000c, non_ehci + FSL_SOC_USB_PRICTRL);
+		iowrite32be(0x00000040, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
+#endif
+		iowrite32be(0x00000001, non_ehci + FSL_SOC_USB_SICTRL);
+	}
+
+	return 0;
+}
+
+/* called after powerup, by probe or system-pm "wakeup" */
+static int ehci_fsl_reinit(struct ehci_hcd *ehci)
+{
+	if (ehci_fsl_usb_setup(ehci))
+		return -EINVAL;
+
+	return 0;
+}
+
+/* called during probe() after chip reset completes */
+static int ehci_fsl_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+	struct fsl_usb2_platform_data *pdata;
+	struct device *dev;
+
+	dev = hcd->self.controller;
+	pdata = dev_get_platdata(hcd->self.controller);
+	ehci->big_endian_desc = pdata->big_endian_desc;
+	ehci->big_endian_mmio = pdata->big_endian_mmio;
+
+	/* EHCI registers start at offset 0x100 */
+	ehci->caps = hcd->regs + 0x100;
+
+#ifdef CONFIG_PPC_83xx
+	/*
+	 * Deal with MPC834X that need port power to be cycled after the power
+	 * fault condition is removed. Otherwise the state machine does not
+	 * reflect PORTSC[CSC] correctly.
+	 */
+	ehci->need_oc_pp_cycle = 1;
+#endif
+
+	hcd->has_tt = 1;
+
+	retval = ehci_setup(hcd);
+	if (retval)
+		return retval;
+
+	if (of_device_is_compatible(dev->parent->of_node,
+				    "fsl,mpc5121-usb2-dr")) {
+		/*
+		 * set SBUSCFG:AHBBRST so that control msgs don't
+		 * fail when doing heavy PATA writes.
+		 */
+		ehci_writel(ehci, SBUSCFG_INCR8,
+			    hcd->regs + FSL_SOC_USB_SBUSCFG);
+	}
+
+	retval = ehci_fsl_reinit(ehci);
+	return retval;
+}
+
+struct ehci_fsl {
+	struct ehci_hcd	ehci;
+
+#ifdef CONFIG_PM
+	/* Saved USB PHY settings, need to restore after deep sleep. */
+	u32 usb_ctrl;
+#endif
+};
+
+#ifdef CONFIG_PM
+
+#ifdef CONFIG_PPC_MPC512x
+static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
+	u32 tmp;
+
+#ifdef CONFIG_DYNAMIC_DEBUG
+	u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
+	mode &= USBMODE_CM_MASK;
+	tmp = ehci_readl(ehci, hcd->regs + 0x140);	/* usbcmd */
+
+	dev_dbg(dev, "suspend=%d already_suspended=%d "
+		"mode=%d  usbcmd %08x\n", pdata->suspended,
+		pdata->already_suspended, mode, tmp);
+#endif
+
+	/*
+	 * If the controller is already suspended, then this must be a
+	 * PM suspend.  Remember this fact, so that we will leave the
+	 * controller suspended at PM resume time.
+	 */
+	if (pdata->suspended) {
+		dev_dbg(dev, "already suspended, leaving early\n");
+		pdata->already_suspended = 1;
+		return 0;
+	}
+
+	dev_dbg(dev, "suspending...\n");
+
+	ehci->rh_state = EHCI_RH_SUSPENDED;
+	dev->power.power_state = PMSG_SUSPEND;
+
+	/* ignore non-host interrupts */
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/* stop the controller */
+	tmp = ehci_readl(ehci, &ehci->regs->command);
+	tmp &= ~CMD_RUN;
+	ehci_writel(ehci, tmp, &ehci->regs->command);
+
+	/* save EHCI registers */
+	pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
+	pdata->pm_command &= ~CMD_RUN;
+	pdata->pm_status  = ehci_readl(ehci, &ehci->regs->status);
+	pdata->pm_intr_enable  = ehci_readl(ehci, &ehci->regs->intr_enable);
+	pdata->pm_frame_index  = ehci_readl(ehci, &ehci->regs->frame_index);
+	pdata->pm_segment  = ehci_readl(ehci, &ehci->regs->segment);
+	pdata->pm_frame_list  = ehci_readl(ehci, &ehci->regs->frame_list);
+	pdata->pm_async_next  = ehci_readl(ehci, &ehci->regs->async_next);
+	pdata->pm_configured_flag  =
+		ehci_readl(ehci, &ehci->regs->configured_flag);
+	pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
+	pdata->pm_usbgenctrl = ehci_readl(ehci,
+					  hcd->regs + FSL_SOC_USB_USBGENCTRL);
+
+	/* clear the W1C bits */
+	pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
+
+	pdata->suspended = 1;
+
+	/* clear PP to cut power to the port */
+	tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
+	tmp &= ~PORT_POWER;
+	ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
+
+	return 0;
+}
+
+static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
+	u32 tmp;
+
+	dev_dbg(dev, "suspend=%d already_suspended=%d\n",
+		pdata->suspended, pdata->already_suspended);
+
+	/*
+	 * If the controller was already suspended at suspend time,
+	 * then don't resume it now.
+	 */
+	if (pdata->already_suspended) {
+		dev_dbg(dev, "already suspended, leaving early\n");
+		pdata->already_suspended = 0;
+		return 0;
+	}
+
+	if (!pdata->suspended) {
+		dev_dbg(dev, "not suspended, leaving early\n");
+		return 0;
+	}
+
+	pdata->suspended = 0;
+
+	dev_dbg(dev, "resuming...\n");
+
+	/* set host mode */
+	tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
+	ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
+
+	ehci_writel(ehci, pdata->pm_usbgenctrl,
+		    hcd->regs + FSL_SOC_USB_USBGENCTRL);
+	ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
+		    hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
+
+	ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
+
+	/* restore EHCI registers */
+	ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
+	ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
+	ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
+	ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
+	ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
+	ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
+	ehci_writel(ehci, pdata->pm_configured_flag,
+		    &ehci->regs->configured_flag);
+	ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
+
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	ehci->rh_state = EHCI_RH_RUNNING;
+	dev->power.power_state = PMSG_ON;
+
+	tmp = ehci_readl(ehci, &ehci->regs->command);
+	tmp |= CMD_RUN;
+	ehci_writel(ehci, tmp, &ehci->regs->command);
+
+	usb_hcd_resume_root_hub(hcd);
+
+	return 0;
+}
+#else
+static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
+{
+	return 0;
+}
+#endif /* CONFIG_PPC_MPC512x */
+
+static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	return container_of(ehci, struct ehci_fsl, ehci);
+}
+
+static int ehci_fsl_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+	void __iomem *non_ehci = hcd->regs;
+
+	if (of_device_is_compatible(dev->parent->of_node,
+				    "fsl,mpc5121-usb2-dr")) {
+		return ehci_fsl_mpc512x_drv_suspend(dev);
+	}
+
+	ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
+			device_may_wakeup(dev));
+	if (!fsl_deep_sleep())
+		return 0;
+
+	ehci_fsl->usb_ctrl = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+	return 0;
+}
+
+static int ehci_fsl_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	void __iomem *non_ehci = hcd->regs;
+
+	if (of_device_is_compatible(dev->parent->of_node,
+				    "fsl,mpc5121-usb2-dr")) {
+		return ehci_fsl_mpc512x_drv_resume(dev);
+	}
+
+	ehci_prepare_ports_for_controller_resume(ehci);
+	if (!fsl_deep_sleep())
+		return 0;
+
+	usb_root_hub_lost_power(hcd->self.root_hub);
+
+	/* Restore USB PHY settings and enable the controller. */
+	iowrite32be(ehci_fsl->usb_ctrl, non_ehci + FSL_SOC_USB_CTRL);
+
+	ehci_reset(ehci);
+	ehci_fsl_reinit(ehci);
+
+	return 0;
+}
+
+static int ehci_fsl_drv_restore(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	usb_root_hub_lost_power(hcd->self.root_hub);
+	return 0;
+}
+
+static const struct dev_pm_ops ehci_fsl_pm_ops = {
+	.suspend = ehci_fsl_drv_suspend,
+	.resume = ehci_fsl_drv_resume,
+	.restore = ehci_fsl_drv_restore,
+};
+
+#define EHCI_FSL_PM_OPS		(&ehci_fsl_pm_ops)
+#else
+#define EHCI_FSL_PM_OPS		NULL
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_USB_OTG
+static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	u32 status;
+
+	if (!port)
+		return -EINVAL;
+
+	port--;
+
+	/* start port reset before HNP protocol time out */
+	status = readl(&ehci->regs->port_status[port]);
+	if (!(status & PORT_CONNECT))
+		return -ENODEV;
+
+	/* hub_wq will finish the reset later */
+	if (ehci_is_TDI(ehci)) {
+		writel(PORT_RESET |
+		       (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
+		       &ehci->regs->port_status[port]);
+	} else {
+		writel(PORT_RESET, &ehci->regs->port_status[port]);
+	}
+
+	return 0;
+}
+#else
+#define ehci_start_port_reset	NULL
+#endif /* CONFIG_USB_OTG */
+
+static const struct ehci_driver_overrides ehci_fsl_overrides __initconst = {
+	.extra_priv_size = sizeof(struct ehci_fsl),
+	.reset = ehci_fsl_setup,
+};
+
+/**
+ * fsl_ehci_drv_remove - shutdown processing for FSL-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_fsl_probe().
+ *
+ */
+
+static int fsl_ehci_drv_remove(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+		otg_set_host(hcd->usb_phy->otg, NULL);
+		usb_put_phy(hcd->usb_phy);
+	}
+
+	usb_remove_hcd(hcd);
+
+	/*
+	 * do platform specific un-initialization:
+	 * release iomux pins, disable clock, etc.
+	 */
+	if (pdata->exit)
+		pdata->exit(pdev);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static struct platform_driver ehci_fsl_driver = {
+	.probe = fsl_ehci_drv_probe,
+	.remove = fsl_ehci_drv_remove,
+	.shutdown = usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "fsl-ehci",
+		.pm = EHCI_FSL_PM_OPS,
+	},
+};
+
+static int __init ehci_fsl_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info(DRV_NAME ": " DRIVER_DESC "\n");
+
+	ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides);
+
+	fsl_ehci_hc_driver.product_desc =
+			"Freescale On-Chip EHCI Host Controller";
+	fsl_ehci_hc_driver.start_port_reset = ehci_start_port_reset;
+
+
+	return platform_driver_register(&ehci_fsl_driver);
+}
+module_init(ehci_fsl_init);
+
+static void __exit ehci_fsl_cleanup(void)
+{
+	platform_driver_unregister(&ehci_fsl_driver);
+}
+module_exit(ehci_fsl_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);