Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1352 insertions, 0 deletions

diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
new file mode 100644
index 000000000..9f9ab5cce
--- /dev/null
+++ b/drivers/usb/host/ehci-hub.c
@@ -0,0 +1,1352 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2001-2004 by David Brownell
+ */
+
+/* this file is part of ehci-hcd.c */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Root Hub ... the nonsharable stuff
+ *
+ * Registers don't need cpu_to_le32, that happens transparently
+ */
+
+/*-------------------------------------------------------------------------*/
+
+#define	PORT_WAKE_BITS	(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
+
+#ifdef	CONFIG_PM
+
+static void unlink_empty_async_suspended(struct ehci_hcd *ehci);
+
+static int persist_enabled_on_companion(struct usb_device *udev, void *unused)
+{
+	return !udev->maxchild && udev->persist_enabled &&
+		udev->bus->root_hub->speed < USB_SPEED_HIGH;
+}
+
+/* After a power loss, ports that were owned by the companion must be
+ * reset so that the companion can still own them.
+ */
+static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
+{
+	u32 __iomem	*reg;
+	u32		status;
+	int		port;
+	__le32		buf;
+	struct usb_hcd	*hcd = ehci_to_hcd(ehci);
+
+	if (!ehci->owned_ports)
+		return;
+
+	/*
+	 * USB 1.1 devices are mostly HIDs, which don't need to persist across
+	 * suspends. If we ensure that none of our companion's devices have
+	 * persist_enabled (by looking through all USB 1.1 buses in the system),
+	 * we can skip this and avoid slowing resume down. Devices without
+	 * persist will just get reenumerated shortly after resume anyway.
+	 */
+	if (!usb_for_each_dev(NULL, persist_enabled_on_companion))
+		return;
+
+	/* Make sure the ports are powered */
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		if (test_bit(port, &ehci->owned_ports)) {
+			reg = &ehci->regs->port_status[port];
+			status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+			if (!(status & PORT_POWER))
+				ehci_port_power(ehci, port, true);
+		}
+	}
+
+	/* Give the connections some time to appear */
+	msleep(20);
+
+	spin_lock_irq(&ehci->lock);
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		if (test_bit(port, &ehci->owned_ports)) {
+			reg = &ehci->regs->port_status[port];
+			status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+
+			/* Port already owned by companion? */
+			if (status & PORT_OWNER)
+				clear_bit(port, &ehci->owned_ports);
+			else if (test_bit(port, &ehci->companion_ports))
+				ehci_writel(ehci, status & ~PORT_PE, reg);
+			else {
+				spin_unlock_irq(&ehci->lock);
+				ehci_hub_control(hcd, SetPortFeature,
+						USB_PORT_FEAT_RESET, port + 1,
+						NULL, 0);
+				spin_lock_irq(&ehci->lock);
+			}
+		}
+	}
+	spin_unlock_irq(&ehci->lock);
+
+	if (!ehci->owned_ports)
+		return;
+	msleep(90);		/* Wait for resets to complete */
+
+	spin_lock_irq(&ehci->lock);
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		if (test_bit(port, &ehci->owned_ports)) {
+			spin_unlock_irq(&ehci->lock);
+			ehci_hub_control(hcd, GetPortStatus,
+					0, port + 1,
+					(char *) &buf, sizeof(buf));
+			spin_lock_irq(&ehci->lock);
+
+			/* The companion should now own the port,
+			 * but if something went wrong the port must not
+			 * remain enabled.
+			 */
+			reg = &ehci->regs->port_status[port];
+			status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+			if (status & PORT_OWNER)
+				ehci_writel(ehci, status | PORT_CSC, reg);
+			else {
+				ehci_dbg(ehci, "failed handover port %d: %x\n",
+						port + 1, status);
+				ehci_writel(ehci, status & ~PORT_PE, reg);
+			}
+		}
+	}
+
+	ehci->owned_ports = 0;
+	spin_unlock_irq(&ehci->lock);
+}
+
+static int ehci_port_change(struct ehci_hcd *ehci)
+{
+	int i = HCS_N_PORTS(ehci->hcs_params);
+
+	/* First check if the controller indicates a change event */
+
+	if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
+		return 1;
+
+	/*
+	 * Not all controllers appear to update this while going from D3 to D0,
+	 * so check the individual port status registers as well
+	 */
+
+	while (i--)
+		if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
+			return 1;
+
+	return 0;
+}
+
+void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
+		bool suspending, bool do_wakeup)
+{
+	int		port;
+	u32		temp;
+
+	/* If remote wakeup is enabled for the root hub but disabled
+	 * for the controller, we must adjust all the port wakeup flags
+	 * when the controller is suspended or resumed.  In all other
+	 * cases they don't need to be changed.
+	 */
+	if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
+		return;
+
+	spin_lock_irq(&ehci->lock);
+
+	/* clear phy low-power mode before changing wakeup flags */
+	if (ehci->has_tdi_phy_lpm) {
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[port];
+
+			temp = ehci_readl(ehci, hostpc_reg);
+			ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
+		}
+		spin_unlock_irq(&ehci->lock);
+		msleep(5);
+		spin_lock_irq(&ehci->lock);
+	}
+
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		u32 __iomem	*reg = &ehci->regs->port_status[port];
+		u32		t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+		u32		t2 = t1 & ~PORT_WAKE_BITS;
+
+		/* If we are suspending the controller, clear the flags.
+		 * If we are resuming the controller, set the wakeup flags.
+		 */
+		if (!suspending) {
+			if (t1 & PORT_CONNECT)
+				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
+			else
+				t2 |= PORT_WKOC_E | PORT_WKCONN_E;
+		}
+		ehci_writel(ehci, t2, reg);
+	}
+
+	/* enter phy low-power mode again */
+	if (ehci->has_tdi_phy_lpm) {
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[port];
+
+			temp = ehci_readl(ehci, hostpc_reg);
+			ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
+		}
+	}
+
+	/* Does the root hub have a port wakeup pending? */
+	if (!suspending && ehci_port_change(ehci))
+		usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
+
+	spin_unlock_irq(&ehci->lock);
+}
+EXPORT_SYMBOL_GPL(ehci_adjust_port_wakeup_flags);
+
+static int ehci_bus_suspend (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	int			port;
+	int			mask;
+	int			changed;
+	bool			fs_idle_delay;
+
+	ehci_dbg(ehci, "suspend root hub\n");
+
+	if (time_before (jiffies, ehci->next_statechange))
+		msleep(5);
+
+	/* stop the schedules */
+	ehci_quiesce(ehci);
+
+	spin_lock_irq (&ehci->lock);
+	if (ehci->rh_state < EHCI_RH_RUNNING)
+		goto done;
+
+	/* Once the controller is stopped, port resumes that are already
+	 * in progress won't complete.  Hence if remote wakeup is enabled
+	 * for the root hub and any ports are in the middle of a resume or
+	 * remote wakeup, we must fail the suspend.
+	 */
+	if (hcd->self.root_hub->do_remote_wakeup) {
+		if (ehci->resuming_ports) {
+			spin_unlock_irq(&ehci->lock);
+			ehci_dbg(ehci, "suspend failed because a port is resuming\n");
+			return -EBUSY;
+		}
+	}
+
+	/* Unlike other USB host controller types, EHCI doesn't have
+	 * any notion of "global" or bus-wide suspend.  The driver has
+	 * to manually suspend all the active unsuspended ports, and
+	 * then manually resume them in the bus_resume() routine.
+	 */
+	ehci->bus_suspended = 0;
+	ehci->owned_ports = 0;
+	changed = 0;
+	fs_idle_delay = false;
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		u32 __iomem	*reg = &ehci->regs->port_status [port];
+		u32		t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+		u32		t2 = t1 & ~PORT_WAKE_BITS;
+
+		/* keep track of which ports we suspend */
+		if (t1 & PORT_OWNER)
+			set_bit(port, &ehci->owned_ports);
+		else if ((t1 & PORT_PE) && !(t1 & PORT_SUSPEND)) {
+			t2 |= PORT_SUSPEND;
+			set_bit(port, &ehci->bus_suspended);
+		}
+
+		/* enable remote wakeup on all ports, if told to do so */
+		if (hcd->self.root_hub->do_remote_wakeup) {
+			/* only enable appropriate wake bits, otherwise the
+			 * hardware can not go phy low power mode. If a race
+			 * condition happens here(connection change during bits
+			 * set), the port change detection will finally fix it.
+			 */
+			if (t1 & PORT_CONNECT)
+				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
+			else
+				t2 |= PORT_WKOC_E | PORT_WKCONN_E;
+		}
+
+		if (t1 != t2) {
+			/*
+			 * On some controllers, Wake-On-Disconnect will
+			 * generate false wakeup signals until the bus
+			 * switches over to full-speed idle.  For their
+			 * sake, add a delay if we need one.
+			 */
+			if ((t2 & PORT_WKDISC_E) &&
+					ehci_port_speed(ehci, t2) ==
+						USB_PORT_STAT_HIGH_SPEED)
+				fs_idle_delay = true;
+			ehci_writel(ehci, t2, reg);
+			changed = 1;
+		}
+	}
+	spin_unlock_irq(&ehci->lock);
+
+	if (changed && ehci_has_fsl_susp_errata(ehci))
+		/*
+		 * Wait for at least 10 millisecondes to ensure the controller
+		 * enter the suspend status before initiating a port resume
+		 * using the Force Port Resume bit (Not-EHCI compatible).
+		 */
+		usleep_range(10000, 20000);
+
+	if ((changed && ehci->has_tdi_phy_lpm) || fs_idle_delay) {
+		/*
+		 * Wait for HCD to enter low-power mode or for the bus
+		 * to switch to full-speed idle.
+		 */
+		usleep_range(5000, 5500);
+	}
+
+	if (changed && ehci->has_tdi_phy_lpm) {
+		spin_lock_irq(&ehci->lock);
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[port];
+			u32		t3;
+
+			t3 = ehci_readl(ehci, hostpc_reg);
+			ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
+			t3 = ehci_readl(ehci, hostpc_reg);
+			ehci_dbg(ehci, "Port %d phy low-power mode %s\n",
+					port, (t3 & HOSTPC_PHCD) ?
+					"succeeded" : "failed");
+		}
+		spin_unlock_irq(&ehci->lock);
+	}
+
+	/* Apparently some devices need a >= 1-uframe delay here */
+	if (ehci->bus_suspended)
+		udelay(150);
+
+	/* turn off now-idle HC */
+	ehci_halt (ehci);
+
+	spin_lock_irq(&ehci->lock);
+	if (ehci->enabled_hrtimer_events & BIT(EHCI_HRTIMER_POLL_DEAD))
+		ehci_handle_controller_death(ehci);
+	if (ehci->rh_state != EHCI_RH_RUNNING)
+		goto done;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
+
+	unlink_empty_async_suspended(ehci);
+
+	/* Some Synopsys controllers mistakenly leave IAA turned on */
+	ehci_writel(ehci, STS_IAA, &ehci->regs->status);
+
+	/* Any IAA cycle that started before the suspend is now invalid */
+	end_iaa_cycle(ehci);
+	ehci_handle_start_intr_unlinks(ehci);
+	ehci_handle_intr_unlinks(ehci);
+	end_free_itds(ehci);
+
+	/* allow remote wakeup */
+	mask = INTR_MASK;
+	if (!hcd->self.root_hub->do_remote_wakeup)
+		mask &= ~STS_PCD;
+	ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+	ehci_readl(ehci, &ehci->regs->intr_enable);
+
+ done:
+	ehci->next_statechange = jiffies + msecs_to_jiffies(10);
+	ehci->enabled_hrtimer_events = 0;
+	ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
+	spin_unlock_irq (&ehci->lock);
+
+	hrtimer_cancel(&ehci->hrtimer);
+	return 0;
+}
+
+
+/* caller has locked the root hub, and should reset/reinit on error */
+static int ehci_bus_resume (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	u32			temp;
+	u32			power_okay;
+	int			i;
+	unsigned long		resume_needed = 0;
+
+	if (time_before (jiffies, ehci->next_statechange))
+		msleep(5);
+	spin_lock_irq (&ehci->lock);
+	if (!HCD_HW_ACCESSIBLE(hcd) || ehci->shutdown)
+		goto shutdown;
+
+	if (unlikely(ehci->debug)) {
+		if (!dbgp_reset_prep(hcd))
+			ehci->debug = NULL;
+		else
+			dbgp_external_startup(hcd);
+	}
+
+	/* Ideally and we've got a real resume here, and no port's power
+	 * was lost.  (For PCI, that means Vaux was maintained.)  But we
+	 * could instead be restoring a swsusp snapshot -- so that BIOS was
+	 * the last user of the controller, not reset/pm hardware keeping
+	 * state we gave to it.
+	 */
+	power_okay = ehci_readl(ehci, &ehci->regs->intr_enable);
+	ehci_dbg(ehci, "resume root hub%s\n",
+			power_okay ? "" : " after power loss");
+
+	/* at least some APM implementations will try to deliver
+	 * IRQs right away, so delay them until we're ready.
+	 */
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+
+	/* re-init operational registers */
+	ehci_writel(ehci, 0, &ehci->regs->segment);
+	ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+	ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
+
+	/* restore CMD_RUN, framelist size, and irq threshold */
+	ehci->command |= CMD_RUN;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci->rh_state = EHCI_RH_RUNNING;
+
+	/*
+	 * According to Bugzilla #8190, the port status for some controllers
+	 * will be wrong without a delay. At their wrong status, the port
+	 * is enabled, but not suspended neither resumed.
+	 */
+	i = HCS_N_PORTS(ehci->hcs_params);
+	while (i--) {
+		temp = ehci_readl(ehci, &ehci->regs->port_status[i]);
+		if ((temp & PORT_PE) &&
+				!(temp & (PORT_SUSPEND | PORT_RESUME))) {
+			ehci_dbg(ehci, "Port status(0x%x) is wrong\n", temp);
+			spin_unlock_irq(&ehci->lock);
+			msleep(8);
+			spin_lock_irq(&ehci->lock);
+			break;
+		}
+	}
+
+	if (ehci->shutdown)
+		goto shutdown;
+
+	/* clear phy low-power mode before resume */
+	if (ehci->bus_suspended && ehci->has_tdi_phy_lpm) {
+		i = HCS_N_PORTS(ehci->hcs_params);
+		while (i--) {
+			if (test_bit(i, &ehci->bus_suspended)) {
+				u32 __iomem	*hostpc_reg =
+							&ehci->regs->hostpc[i];
+
+				temp = ehci_readl(ehci, hostpc_reg);
+				ehci_writel(ehci, temp & ~HOSTPC_PHCD,
+						hostpc_reg);
+			}
+		}
+		spin_unlock_irq(&ehci->lock);
+		msleep(5);
+		spin_lock_irq(&ehci->lock);
+		if (ehci->shutdown)
+			goto shutdown;
+	}
+
+	/* manually resume the ports we suspended during bus_suspend() */
+	i = HCS_N_PORTS (ehci->hcs_params);
+	while (i--) {
+		temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
+		temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
+		if (test_bit(i, &ehci->bus_suspended) &&
+				(temp & PORT_SUSPEND)) {
+			temp |= PORT_RESUME;
+			set_bit(i, &resume_needed);
+		}
+		ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
+	}
+
+	/*
+	 * msleep for USB_RESUME_TIMEOUT ms only if code is trying to resume
+	 * port
+	 */
+	if (resume_needed) {
+		spin_unlock_irq(&ehci->lock);
+		msleep(USB_RESUME_TIMEOUT);
+		spin_lock_irq(&ehci->lock);
+		if (ehci->shutdown)
+			goto shutdown;
+	}
+
+	i = HCS_N_PORTS (ehci->hcs_params);
+	while (i--) {
+		temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
+		if (test_bit(i, &resume_needed)) {
+			temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME);
+			ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
+		}
+	}
+
+	ehci->next_statechange = jiffies + msecs_to_jiffies(5);
+	spin_unlock_irq(&ehci->lock);
+
+	ehci_handover_companion_ports(ehci);
+
+	/* Now we can safely re-enable irqs */
+	spin_lock_irq(&ehci->lock);
+	if (ehci->shutdown)
+		goto shutdown;
+	ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
+	(void) ehci_readl(ehci, &ehci->regs->intr_enable);
+	spin_unlock_irq(&ehci->lock);
+
+	return 0;
+
+ shutdown:
+	spin_unlock_irq(&ehci->lock);
+	return -ESHUTDOWN;
+}
+
+static unsigned long ehci_get_resuming_ports(struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+
+	return ehci->resuming_ports;
+}
+
+#else
+
+#define ehci_bus_suspend	NULL
+#define ehci_bus_resume		NULL
+#define ehci_get_resuming_ports	NULL
+
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Sets the owner of a port
+ */
+static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
+{
+	u32 __iomem		*status_reg;
+	u32			port_status;
+	int 			try;
+
+	status_reg = &ehci->regs->port_status[portnum];
+
+	/*
+	 * The controller won't set the OWNER bit if the port is
+	 * enabled, so this loop will sometimes require at least two
+	 * iterations: one to disable the port and one to set OWNER.
+	 */
+	for (try = 4; try > 0; --try) {
+		spin_lock_irq(&ehci->lock);
+		port_status = ehci_readl(ehci, status_reg);
+		if ((port_status & PORT_OWNER) == new_owner
+				|| (port_status & (PORT_OWNER | PORT_CONNECT))
+					== 0)
+			try = 0;
+		else {
+			port_status ^= PORT_OWNER;
+			port_status &= ~(PORT_PE | PORT_RWC_BITS);
+			ehci_writel(ehci, port_status, status_reg);
+		}
+		spin_unlock_irq(&ehci->lock);
+		if (try > 1)
+			msleep(5);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int check_reset_complete (
+	struct ehci_hcd	*ehci,
+	int		index,
+	u32 __iomem	*status_reg,
+	int		port_status
+) {
+	if (!(port_status & PORT_CONNECT))
+		return port_status;
+
+	/* if reset finished and it's still not enabled -- handoff */
+	if (!(port_status & PORT_PE)) {
+
+		/* with integrated TT, there's nobody to hand it to! */
+		if (ehci_is_TDI(ehci)) {
+			ehci_dbg (ehci,
+				"Failed to enable port %d on root hub TT\n",
+				index+1);
+			return port_status;
+		}
+
+		ehci_dbg (ehci, "port %d full speed --> companion\n",
+			index + 1);
+
+		// what happens if HCS_N_CC(params) == 0 ?
+		port_status |= PORT_OWNER;
+		port_status &= ~PORT_RWC_BITS;
+		ehci_writel(ehci, port_status, status_reg);
+
+		/* ensure 440EPX ohci controller state is operational */
+		if (ehci->has_amcc_usb23)
+			set_ohci_hcfs(ehci, 1);
+	} else {
+		ehci_dbg(ehci, "port %d reset complete, port enabled\n",
+			index + 1);
+		/* ensure 440EPx ohci controller state is suspended */
+		if (ehci->has_amcc_usb23)
+			set_ohci_hcfs(ehci, 0);
+	}
+
+	return port_status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+
+/* build "status change" packet (one or two bytes) from HC registers */
+
+static int
+ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
+	u32		temp, status;
+	u32		mask;
+	int		ports, i, retval = 1;
+	unsigned long	flags;
+	u32		ppcd = ~0;
+
+	/* init status to no-changes */
+	buf [0] = 0;
+	ports = HCS_N_PORTS (ehci->hcs_params);
+	if (ports > 7) {
+		buf [1] = 0;
+		retval++;
+	}
+
+	/* Inform the core about resumes-in-progress by returning
+	 * a non-zero value even if there are no status changes.
+	 */
+	status = ehci->resuming_ports;
+
+	/* Some boards (mostly VIA?) report bogus overcurrent indications,
+	 * causing massive log spam unless we completely ignore them.  It
+	 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
+	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+	 * PORT_POWER; that's surprising, but maybe within-spec.
+	 */
+	if (!ignore_oc)
+		mask = PORT_CSC | PORT_PEC | PORT_OCC;
+	else
+		mask = PORT_CSC | PORT_PEC;
+	// PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
+
+	/* no hub change reports (bit 0) for now (power, ...) */
+
+	/* port N changes (bit N)? */
+	spin_lock_irqsave (&ehci->lock, flags);
+
+	/* get per-port change detect bits */
+	if (ehci->has_ppcd)
+		ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
+
+	for (i = 0; i < ports; i++) {
+		/* leverage per-port change bits feature */
+		if (ppcd & (1 << i))
+			temp = ehci_readl(ehci, &ehci->regs->port_status[i]);
+		else
+			temp = 0;
+
+		/*
+		 * Return status information even for ports with OWNER set.
+		 * Otherwise hub_wq wouldn't see the disconnect event when a
+		 * high-speed device is switched over to the companion
+		 * controller by the user.
+		 */
+
+		if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend)
+				|| (ehci->reset_done[i] && time_after_eq(
+					jiffies, ehci->reset_done[i]))) {
+			if (i < 7)
+			    buf [0] |= 1 << (i + 1);
+			else
+			    buf [1] |= 1 << (i - 7);
+			status = STS_PCD;
+		}
+	}
+
+	/* If a resume is in progress, make sure it can finish */
+	if (ehci->resuming_ports)
+		mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(25));
+
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return status ? retval : 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+ehci_hub_descriptor (
+	struct ehci_hcd			*ehci,
+	struct usb_hub_descriptor	*desc
+) {
+	int		ports = HCS_N_PORTS (ehci->hcs_params);
+	u16		temp;
+
+	desc->bDescriptorType = USB_DT_HUB;
+	desc->bPwrOn2PwrGood = 10;	/* ehci 1.0, 2.3.9 says 20ms max */
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = ports;
+	temp = 1 + (ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+
+	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+	memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
+
+	temp = HUB_CHAR_INDV_PORT_OCPM;	/* per-port overcurrent reporting */
+	if (HCS_PPC (ehci->hcs_params))
+		temp |= HUB_CHAR_INDV_PORT_LPSM; /* per-port power control */
+	else
+		temp |= HUB_CHAR_NO_LPSM; /* no power switching */
+#if 0
+// re-enable when we support USB_PORT_FEAT_INDICATOR below.
+	if (HCS_INDICATOR (ehci->hcs_params))
+		temp |= HUB_CHAR_PORTIND; /* per-port indicators (LEDs) */
+#endif
+	desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+/*-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_HCD_TEST_MODE
+
+#define EHSET_TEST_SINGLE_STEP_SET_FEATURE 0x06
+
+static void usb_ehset_completion(struct urb *urb)
+{
+	struct completion  *done = urb->context;
+
+	complete(done);
+}
+static int submit_single_step_set_feature(
+	struct usb_hcd	*hcd,
+	struct urb	*urb,
+	int		is_setup
+);
+
+/*
+ * Allocate and initialize a control URB. This request will be used by the
+ * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages
+ * of the GetDescriptor request are sent 15 seconds after the SETUP stage.
+ * Return NULL if failed.
+ */
+static struct urb *request_single_step_set_feature_urb(
+	struct usb_device	*udev,
+	void			*dr,
+	void			*buf,
+	struct completion	*done
+) {
+	struct urb *urb;
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	struct usb_host_endpoint *ep;
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return NULL;
+
+	urb->pipe = usb_rcvctrlpipe(udev, 0);
+	ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out)
+				[usb_pipeendpoint(urb->pipe)];
+	if (!ep) {
+		usb_free_urb(urb);
+		return NULL;
+	}
+
+	urb->ep = ep;
+	urb->dev = udev;
+	urb->setup_packet = (void *)dr;
+	urb->transfer_buffer = buf;
+	urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
+	urb->complete = usb_ehset_completion;
+	urb->status = -EINPROGRESS;
+	urb->actual_length = 0;
+	urb->transfer_flags = URB_DIR_IN;
+	usb_get_urb(urb);
+	atomic_inc(&urb->use_count);
+	atomic_inc(&urb->dev->urbnum);
+	urb->setup_dma = dma_map_single(
+			hcd->self.sysdev,
+			urb->setup_packet,
+			sizeof(struct usb_ctrlrequest),
+			DMA_TO_DEVICE);
+	urb->transfer_dma = dma_map_single(
+			hcd->self.sysdev,
+			urb->transfer_buffer,
+			urb->transfer_buffer_length,
+			DMA_FROM_DEVICE);
+	urb->context = done;
+	return urb;
+}
+
+static int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
+{
+	int retval = -ENOMEM;
+	struct usb_ctrlrequest *dr;
+	struct urb *urb;
+	struct usb_device *udev;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct usb_device_descriptor *buf;
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	/* Obtain udev of the rhub's child port */
+	udev = usb_hub_find_child(hcd->self.root_hub, port);
+	if (!udev) {
+		ehci_err(ehci, "No device attached to the RootHub\n");
+		return -ENODEV;
+	}
+	buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+	if (!dr) {
+		kfree(buf);
+		return -ENOMEM;
+	}
+
+	/* Fill Setup packet for GetDescriptor */
+	dr->bRequestType = USB_DIR_IN;
+	dr->bRequest = USB_REQ_GET_DESCRIPTOR;
+	dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
+	dr->wIndex = 0;
+	dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
+	urb = request_single_step_set_feature_urb(udev, dr, buf, &done);
+	if (!urb)
+		goto cleanup;
+
+	/* Submit just the SETUP stage */
+	retval = submit_single_step_set_feature(hcd, urb, 1);
+	if (retval)
+		goto out1;
+	if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
+		usb_kill_urb(urb);
+		retval = -ETIMEDOUT;
+		ehci_err(ehci, "%s SETUP stage timed out on ep0\n", __func__);
+		goto out1;
+	}
+	msleep(15 * 1000);
+
+	/* Complete remaining DATA and STATUS stages using the same URB */
+	urb->status = -EINPROGRESS;
+	usb_get_urb(urb);
+	atomic_inc(&urb->use_count);
+	atomic_inc(&urb->dev->urbnum);
+	retval = submit_single_step_set_feature(hcd, urb, 0);
+	if (!retval && !wait_for_completion_timeout(&done,
+						msecs_to_jiffies(2000))) {
+		usb_kill_urb(urb);
+		retval = -ETIMEDOUT;
+		ehci_err(ehci, "%s IN stage timed out on ep0\n", __func__);
+	}
+out1:
+	usb_free_urb(urb);
+cleanup:
+	kfree(dr);
+	kfree(buf);
+	return retval;
+}
+#endif /* CONFIG_USB_HCD_TEST_MODE */
+/*-------------------------------------------------------------------------*/
+
+int ehci_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength
+) {
+	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
+	int		ports = HCS_N_PORTS (ehci->hcs_params);
+	u32 __iomem	*status_reg, *hostpc_reg;
+	u32		temp, temp1, status;
+	unsigned long	flags;
+	int		retval = 0;
+	unsigned	selector;
+
+	/*
+	 * Avoid underflow while calculating (wIndex & 0xff) - 1.
+	 * The compiler might deduce that wIndex can never be 0 and then
+	 * optimize away the tests for !wIndex below.
+	 */
+	temp = wIndex & 0xff;
+	temp -= (temp > 0);
+	status_reg = &ehci->regs->port_status[temp];
+	hostpc_reg = &ehci->regs->hostpc[temp];
+
+	/*
+	 * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+	 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+	 * (track current state ourselves) ... blink for diagnostics,
+	 * power, "this is the one", etc.  EHCI spec supports this.
+	 */
+
+	spin_lock_irqsave (&ehci->lock, flags);
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		temp = ehci_readl(ehci, status_reg);
+		temp &= ~PORT_RWC_BITS;
+
+		/*
+		 * Even if OWNER is set, so the port is owned by the
+		 * companion controller, hub_wq needs to be able to clear
+		 * the port-change status bits (especially
+		 * USB_PORT_STAT_C_CONNECTION).
+		 */
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			ehci_writel(ehci, temp & ~PORT_PE, status_reg);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			ehci_writel(ehci, temp | PORT_PEC, status_reg);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			if (temp & PORT_RESET)
+				goto error;
+			if (ehci->no_selective_suspend)
+				break;
+#ifdef CONFIG_USB_OTG
+			if ((hcd->self.otg_port == (wIndex + 1))
+			    && hcd->self.b_hnp_enable) {
+				otg_start_hnp(hcd->usb_phy->otg);
+				break;
+			}
+#endif
+			if (!(temp & PORT_SUSPEND))
+				break;
+			if ((temp & PORT_PE) == 0)
+				goto error;
+
+			/* clear phy low-power mode before resume */
+			if (ehci->has_tdi_phy_lpm) {
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
+						hostpc_reg);
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				msleep(5);/* wait to leave low-power mode */
+				spin_lock_irqsave(&ehci->lock, flags);
+			}
+			/* resume signaling for 20 msec */
+			temp &= ~PORT_WAKE_BITS;
+			ehci_writel(ehci, temp | PORT_RESUME, status_reg);
+			ehci->reset_done[wIndex] = jiffies
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
+			set_bit(wIndex, &ehci->resuming_ports);
+			usb_hcd_start_port_resume(&hcd->self, wIndex);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			clear_bit(wIndex, &ehci->port_c_suspend);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (HCS_PPC(ehci->hcs_params)) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				ehci_port_power(ehci, wIndex, false);
+				spin_lock_irqsave(&ehci->lock, flags);
+			}
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			ehci_writel(ehci, temp | PORT_CSC, status_reg);
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			ehci_writel(ehci, temp | PORT_OCC, status_reg);
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			/* GetPortStatus clears reset */
+			break;
+		default:
+			goto error;
+		}
+		ehci_readl(ehci, &ehci->regs->command);	/* unblock posted write */
+		break;
+	case GetHubDescriptor:
+		ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
+			buf);
+		break;
+	case GetHubStatus:
+		/* no hub-wide feature/status flags */
+		memset (buf, 0, 4);
+		//cpu_to_le32s ((u32 *) buf);
+		break;
+	case GetPortStatus:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		status = 0;
+		temp = ehci_readl(ehci, status_reg);
+
+		// wPortChange bits
+		if (temp & PORT_CSC)
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
+		if (temp & PORT_PEC)
+			status |= USB_PORT_STAT_C_ENABLE << 16;
+
+		if ((temp & PORT_OCC) && !ignore_oc){
+			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+
+			/*
+			 * Hubs should disable port power on over-current.
+			 * However, not all EHCI implementations do this
+			 * automatically, even if they _do_ support per-port
+			 * power switching; they're allowed to just limit the
+			 * current.  hub_wq will turn the power back on.
+			 */
+			if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle))
+					&& HCS_PPC(ehci->hcs_params)) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				ehci_port_power(ehci, wIndex, false);
+				spin_lock_irqsave(&ehci->lock, flags);
+				temp = ehci_readl(ehci, status_reg);
+			}
+		}
+
+		/* no reset or resume pending */
+		if (!ehci->reset_done[wIndex]) {
+
+			/* Remote Wakeup received? */
+			if (temp & PORT_RESUME) {
+				/* resume signaling for 20 msec */
+				ehci->reset_done[wIndex] = jiffies
+						+ msecs_to_jiffies(20);
+				usb_hcd_start_port_resume(&hcd->self, wIndex);
+				set_bit(wIndex, &ehci->resuming_ports);
+				/* check the port again */
+				mod_timer(&ehci_to_hcd(ehci)->rh_timer,
+						ehci->reset_done[wIndex]);
+			}
+
+		/* reset or resume not yet complete */
+		} else if (!time_after_eq(jiffies, ehci->reset_done[wIndex])) {
+			;	/* wait until it is complete */
+
+		/* resume completed */
+		} else if (test_bit(wIndex, &ehci->resuming_ports)) {
+			clear_bit(wIndex, &ehci->suspended_ports);
+			set_bit(wIndex, &ehci->port_c_suspend);
+			ehci->reset_done[wIndex] = 0;
+			usb_hcd_end_port_resume(&hcd->self, wIndex);
+
+			/* stop resume signaling */
+			temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME);
+			ehci_writel(ehci, temp, status_reg);
+			clear_bit(wIndex, &ehci->resuming_ports);
+			retval = ehci_handshake(ehci, status_reg,
+					PORT_RESUME, 0, 2000 /* 2msec */);
+			if (retval != 0) {
+				ehci_err(ehci, "port %d resume error %d\n",
+						wIndex + 1, retval);
+				goto error;
+			}
+			temp = ehci_readl(ehci, status_reg);
+
+		/* whoever resets must GetPortStatus to complete it!! */
+		} else {
+			status |= USB_PORT_STAT_C_RESET << 16;
+			ehci->reset_done [wIndex] = 0;
+
+			/* force reset to complete */
+			ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
+					status_reg);
+			/* REVISIT:  some hardware needs 550+ usec to clear
+			 * this bit; seems too long to spin routinely...
+			 */
+			retval = ehci_handshake(ehci, status_reg,
+					PORT_RESET, 0, 1000);
+			if (retval != 0) {
+				ehci_err (ehci, "port %d reset error %d\n",
+					wIndex + 1, retval);
+				goto error;
+			}
+
+			/* see what we found out */
+			temp = check_reset_complete (ehci, wIndex, status_reg,
+					ehci_readl(ehci, status_reg));
+		}
+
+		/* transfer dedicated ports to the companion hc */
+		if ((temp & PORT_CONNECT) &&
+				test_bit(wIndex, &ehci->companion_ports)) {
+			temp &= ~PORT_RWC_BITS;
+			temp |= PORT_OWNER;
+			ehci_writel(ehci, temp, status_reg);
+			ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
+			temp = ehci_readl(ehci, status_reg);
+		}
+
+		/*
+		 * Even if OWNER is set, there's no harm letting hub_wq
+		 * see the wPortStatus values (they should all be 0 except
+		 * for PORT_POWER anyway).
+		 */
+
+		if (temp & PORT_CONNECT) {
+			status |= USB_PORT_STAT_CONNECTION;
+			// status may be from integrated TT
+			if (ehci->has_hostpc) {
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				status |= ehci_port_speed(ehci, temp1);
+			} else
+				status |= ehci_port_speed(ehci, temp);
+		}
+		if (temp & PORT_PE)
+			status |= USB_PORT_STAT_ENABLE;
+
+		/* maybe the port was unsuspended without our knowledge */
+		if (temp & (PORT_SUSPEND|PORT_RESUME)) {
+			status |= USB_PORT_STAT_SUSPEND;
+		} else if (test_bit(wIndex, &ehci->suspended_ports)) {
+			clear_bit(wIndex, &ehci->suspended_ports);
+			clear_bit(wIndex, &ehci->resuming_ports);
+			ehci->reset_done[wIndex] = 0;
+			if (temp & PORT_PE)
+				set_bit(wIndex, &ehci->port_c_suspend);
+			usb_hcd_end_port_resume(&hcd->self, wIndex);
+		}
+
+		if (temp & PORT_OC)
+			status |= USB_PORT_STAT_OVERCURRENT;
+		if (temp & PORT_RESET)
+			status |= USB_PORT_STAT_RESET;
+		if (temp & PORT_POWER)
+			status |= USB_PORT_STAT_POWER;
+		if (test_bit(wIndex, &ehci->port_c_suspend))
+			status |= USB_PORT_STAT_C_SUSPEND << 16;
+
+		if (status & ~0xffff)	/* only if wPortChange is interesting */
+			dbg_port(ehci, "GetStatus", wIndex + 1, temp);
+		put_unaligned_le32(status, buf);
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		selector = wIndex >> 8;
+		wIndex &= 0xff;
+		if (unlikely(ehci->debug)) {
+			/* If the debug port is active any port
+			 * feature requests should get denied */
+			if (wIndex == HCS_DEBUG_PORT(ehci->hcs_params) &&
+			    (readl(&ehci->debug->control) & DBGP_ENABLED)) {
+				retval = -ENODEV;
+				goto error_exit;
+			}
+		}
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		temp = ehci_readl(ehci, status_reg);
+		if (temp & PORT_OWNER)
+			break;
+
+		temp &= ~PORT_RWC_BITS;
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			if (ehci->no_selective_suspend)
+				break;
+			if ((temp & PORT_PE) == 0
+					|| (temp & PORT_RESET) != 0)
+				goto error;
+
+			/* After above check the port must be connected.
+			 * Set appropriate bit thus could put phy into low power
+			 * mode if we have tdi_phy_lpm feature
+			 */
+			temp &= ~PORT_WKCONN_E;
+			temp |= PORT_WKDISC_E | PORT_WKOC_E;
+			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+			if (ehci->has_tdi_phy_lpm) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				msleep(5);/* 5ms for HCD enter low pwr mode */
+				spin_lock_irqsave(&ehci->lock, flags);
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				ehci_writel(ehci, temp1 | HOSTPC_PHCD,
+					hostpc_reg);
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
+					wIndex, (temp1 & HOSTPC_PHCD) ?
+					"succeeded" : "failed");
+			}
+			if (ehci_has_fsl_susp_errata(ehci)) {
+				/* 10ms for HCD enter suspend */
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				usleep_range(10000, 20000);
+				spin_lock_irqsave(&ehci->lock, flags);
+			}
+			set_bit(wIndex, &ehci->suspended_ports);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (HCS_PPC(ehci->hcs_params)) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				ehci_port_power(ehci, wIndex, true);
+				spin_lock_irqsave(&ehci->lock, flags);
+			}
+			break;
+		case USB_PORT_FEAT_RESET:
+			if (temp & (PORT_SUSPEND|PORT_RESUME))
+				goto error;
+			/* line status bits may report this as low speed,
+			 * which can be fine if this root hub has a
+			 * transaction translator built in.
+			 */
+			if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
+					&& !ehci_is_TDI(ehci)
+					&& PORT_USB11 (temp)) {
+				ehci_dbg (ehci,
+					"port %d low speed --> companion\n",
+					wIndex + 1);
+				temp |= PORT_OWNER;
+			} else {
+				temp |= PORT_RESET;
+				temp &= ~PORT_PE;
+
+				/*
+				 * caller must wait, then call GetPortStatus
+				 * usb 2.0 spec says 50 ms resets on root
+				 */
+				ehci->reset_done [wIndex] = jiffies
+						+ msecs_to_jiffies (50);
+
+				/*
+				 * Force full-speed connect for FSL high-speed
+				 * erratum; disable HS Chirp by setting PFSC bit
+				 */
+				if (ehci_has_fsl_hs_errata(ehci))
+					temp |= (1 << PORTSC_FSL_PFSC);
+			}
+			ehci_writel(ehci, temp, status_reg);
+			break;
+
+		/* For downstream facing ports (these):  one hub port is put
+		 * into test mode according to USB2 11.24.2.13, then the hub
+		 * must be reset (which for root hub now means rmmod+modprobe,
+		 * or else system reboot).  See EHCI 2.3.9 and 4.14 for info
+		 * about the EHCI-specific stuff.
+		 */
+		case USB_PORT_FEAT_TEST:
+#ifdef CONFIG_USB_HCD_TEST_MODE
+			if (selector == EHSET_TEST_SINGLE_STEP_SET_FEATURE) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				retval = ehset_single_step_set_feature(hcd,
+								wIndex + 1);
+				spin_lock_irqsave(&ehci->lock, flags);
+				break;
+			}
+#endif
+			if (!selector || selector > 5)
+				goto error;
+			spin_unlock_irqrestore(&ehci->lock, flags);
+			ehci_quiesce(ehci);
+			spin_lock_irqsave(&ehci->lock, flags);
+
+			/* Put all enabled ports into suspend */
+			while (ports--) {
+				u32 __iomem *sreg =
+						&ehci->regs->port_status[ports];
+
+				temp = ehci_readl(ehci, sreg) & ~PORT_RWC_BITS;
+				if (temp & PORT_PE)
+					ehci_writel(ehci, temp | PORT_SUSPEND,
+							sreg);
+			}
+
+			spin_unlock_irqrestore(&ehci->lock, flags);
+			ehci_halt(ehci);
+			spin_lock_irqsave(&ehci->lock, flags);
+
+			temp = ehci_readl(ehci, status_reg);
+			temp |= selector << 16;
+			ehci_writel(ehci, temp, status_reg);
+			break;
+
+		default:
+			goto error;
+		}
+		ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+		break;
+
+	default:
+error:
+		/* "stall" on error */
+		retval = -EPIPE;
+	}
+error_exit:
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(ehci_hub_control);
+
+static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+
+	if (ehci_is_TDI(ehci))
+		return;
+	set_owner(ehci, --portnum, PORT_OWNER);
+}
+
+static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	u32 __iomem		*reg;
+
+	if (ehci_is_TDI(ehci))
+		return 0;
+	reg = &ehci->regs->port_status[portnum - 1];
+	return ehci_readl(ehci, reg) & PORT_OWNER;
+}
+
+static int ehci_port_power(struct ehci_hcd *ehci, int portnum, bool enable)
+{
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	u32 __iomem *status_reg = &ehci->regs->port_status[portnum];
+	u32 temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS;
+
+	if (enable)
+		ehci_writel(ehci, temp | PORT_POWER, status_reg);
+	else
+		ehci_writel(ehci, temp & ~PORT_POWER, status_reg);
+
+	if (hcd->driver->port_power)
+		hcd->driver->port_power(hcd, portnum, enable);
+
+	return 0;
+}