Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 698 insertions, 0 deletions

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
new file mode 100644
index 000000000..ec6739ef3
--- /dev/null
+++ b/drivers/usb/host/ohci-at91.c
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ *  Copyright (C) 2004 SAN People (Pty) Ltd.
+ *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * AT91 Bus Glue
+ *
+ * Based on fragments of 2.4 driver by Rick Bronson.
+ * Based on ohci-omap.c
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/atmel.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <soc/at91/atmel-sfr.h>
+
+#include "ohci.h"
+
+#define valid_port(index)	((index) >= 0 && (index) < AT91_MAX_USBH_PORTS)
+#define at91_for_each_port(index)	\
+		for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
+
+/* interface, function and usb clocks; sometimes also an AHB clock */
+#define hcd_to_ohci_at91_priv(h) \
+	((struct ohci_at91_priv *)hcd_to_ohci(h)->priv)
+
+#define AT91_MAX_USBH_PORTS	3
+struct at91_usbh_data {
+	struct gpio_desc *vbus_pin[AT91_MAX_USBH_PORTS];
+	struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
+	u8 ports;				/* number of ports on root hub */
+	u8 overcurrent_supported;
+	u8 overcurrent_status[AT91_MAX_USBH_PORTS];
+	u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
+};
+
+struct ohci_at91_priv {
+	struct clk *iclk;
+	struct clk *fclk;
+	struct clk *hclk;
+	bool clocked;
+	bool wakeup;		/* Saved wake-up state for resume */
+	struct regmap *sfr_regmap;
+};
+/* interface and function clocks; sometimes also an AHB clock */
+
+#define DRIVER_DESC "OHCI Atmel driver"
+
+static const char hcd_name[] = "ohci-atmel";
+
+static struct hc_driver __read_mostly ohci_at91_hc_driver;
+
+static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = {
+	.extra_priv_size = sizeof(struct ohci_at91_priv),
+};
+
+/*-------------------------------------------------------------------------*/
+
+static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
+{
+	if (ohci_at91->clocked)
+		return;
+
+	clk_set_rate(ohci_at91->fclk, 48000000);
+	clk_prepare_enable(ohci_at91->hclk);
+	clk_prepare_enable(ohci_at91->iclk);
+	clk_prepare_enable(ohci_at91->fclk);
+	ohci_at91->clocked = true;
+}
+
+static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
+{
+	if (!ohci_at91->clocked)
+		return;
+
+	clk_disable_unprepare(ohci_at91->fclk);
+	clk_disable_unprepare(ohci_at91->iclk);
+	clk_disable_unprepare(ohci_at91->hclk);
+	ohci_at91->clocked = false;
+}
+
+static void at91_start_hc(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_regs __iomem *regs = hcd->regs;
+	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+	dev_dbg(&pdev->dev, "start\n");
+
+	/*
+	 * Start the USB clocks.
+	 */
+	at91_start_clock(ohci_at91);
+
+	/*
+	 * The USB host controller must remain in reset.
+	 */
+	writel(0, &regs->control);
+}
+
+static void at91_stop_hc(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_regs __iomem *regs = hcd->regs;
+	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+	dev_dbg(&pdev->dev, "stop\n");
+
+	/*
+	 * Put the USB host controller into reset.
+	 */
+	writel(0, &regs->control);
+
+	/*
+	 * Stop the USB clocks.
+	 */
+	at91_stop_clock(ohci_at91);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
+
+static struct regmap *at91_dt_syscon_sfr(void)
+{
+	struct regmap *regmap;
+
+	regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+	if (IS_ERR(regmap))
+		regmap = NULL;
+
+	return regmap;
+}
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+
+/**
+ * usb_hcd_at91_probe - initialize AT91-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int usb_hcd_at91_probe(const struct hc_driver *driver,
+			struct platform_device *pdev)
+{
+	struct at91_usbh_data *board;
+	struct ohci_hcd *ohci;
+	int retval;
+	struct usb_hcd *hcd;
+	struct ohci_at91_priv *ohci_at91;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_dbg(dev, "hcd probe: missing irq resource\n");
+		return irq;
+	}
+
+	hcd = usb_create_hcd(driver, dev, "at91");
+	if (!hcd)
+		return -ENOMEM;
+	ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(hcd->regs)) {
+		retval = PTR_ERR(hcd->regs);
+		goto err;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	ohci_at91->iclk = devm_clk_get(dev, "ohci_clk");
+	if (IS_ERR(ohci_at91->iclk)) {
+		dev_err(dev, "failed to get ohci_clk\n");
+		retval = PTR_ERR(ohci_at91->iclk);
+		goto err;
+	}
+	ohci_at91->fclk = devm_clk_get(dev, "uhpck");
+	if (IS_ERR(ohci_at91->fclk)) {
+		dev_err(dev, "failed to get uhpck\n");
+		retval = PTR_ERR(ohci_at91->fclk);
+		goto err;
+	}
+	ohci_at91->hclk = devm_clk_get(dev, "hclk");
+	if (IS_ERR(ohci_at91->hclk)) {
+		dev_err(dev, "failed to get hclk\n");
+		retval = PTR_ERR(ohci_at91->hclk);
+		goto err;
+	}
+
+	ohci_at91->sfr_regmap = at91_dt_syscon_sfr();
+	if (!ohci_at91->sfr_regmap)
+		dev_dbg(dev, "failed to find sfr node\n");
+
+	board = hcd->self.controller->platform_data;
+	ohci = hcd_to_ohci(hcd);
+	ohci->num_ports = board->ports;
+	at91_start_hc(pdev);
+
+	/*
+	 * The RemoteWakeupConnected bit has to be set explicitly
+	 * before calling ohci_run. The reset value of this bit is 0.
+	 */
+	ohci->hc_control = OHCI_CTRL_RWC;
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval == 0) {
+		device_wakeup_enable(hcd->self.controller);
+		return retval;
+	}
+
+	/* Error handling */
+	at91_stop_hc(pdev);
+
+ err:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+
+/* may be called with controller, bus, and devices active */
+
+/**
+ * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_at91_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, "rmmod" or something similar.
+ *
+ */
+static void usb_hcd_at91_remove(struct usb_hcd *hcd,
+				struct platform_device *pdev)
+{
+	usb_remove_hcd(hcd);
+	at91_stop_hc(pdev);
+	usb_put_hcd(hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
+{
+	if (!valid_port(port))
+		return;
+
+	gpiod_set_value(pdata->vbus_pin[port], enable);
+}
+
+static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
+{
+	if (!valid_port(port))
+		return -EINVAL;
+
+	return gpiod_get_value(pdata->vbus_pin[port]);
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+	int length = ohci_hub_status_data(hcd, buf);
+	int port;
+
+	at91_for_each_port(port) {
+		if (pdata->overcurrent_changed[port]) {
+			if (!length)
+				length = 1;
+			buf[0] |= 1 << (port + 1);
+		}
+	}
+
+	return length;
+}
+
+static int ohci_at91_port_suspend(struct regmap *regmap, u8 set)
+{
+	u32 regval;
+	int ret;
+
+	if (!regmap)
+		return 0;
+
+	ret = regmap_read(regmap, AT91_SFR_OHCIICR, &regval);
+	if (ret)
+		return ret;
+
+	if (set)
+		regval |= AT91_OHCIICR_USB_SUSPEND;
+	else
+		regval &= ~AT91_OHCIICR_USB_SUSPEND;
+
+	regmap_write(regmap, AT91_SFR_OHCIICR, regval);
+
+	return 0;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+				 u16 wIndex, char *buf, u16 wLength)
+{
+	struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller);
+	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+	struct usb_hub_descriptor *desc;
+	int ret = -EINVAL;
+	u32 *data = (u32 *)buf;
+
+	dev_dbg(hcd->self.controller,
+		"ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+		hcd, typeReq, wValue, wIndex, buf, wLength);
+
+	wIndex--;
+
+	switch (typeReq) {
+	case SetPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+			if (valid_port(wIndex)) {
+				ohci_at91_usb_set_power(pdata, wIndex, 1);
+				ret = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(hcd->self.controller, "SetPortFeat: SUSPEND\n");
+			if (valid_port(wIndex) && ohci_at91->sfr_regmap) {
+				ohci_at91_port_suspend(ohci_at91->sfr_regmap,
+						       1);
+				return 0;
+			}
+			break;
+		}
+		break;
+
+	case ClearPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: C_OVER_CURRENT\n");
+
+			if (valid_port(wIndex)) {
+				pdata->overcurrent_changed[wIndex] = 0;
+				pdata->overcurrent_status[wIndex] = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: OVER_CURRENT\n");
+
+			if (valid_port(wIndex))
+				pdata->overcurrent_status[wIndex] = 0;
+
+			goto out;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: POWER\n");
+
+			if (valid_port(wIndex)) {
+				ohci_at91_usb_set_power(pdata, wIndex, 0);
+				return 0;
+			}
+			break;
+
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(hcd->self.controller, "ClearPortFeature: SUSPEND\n");
+			if (valid_port(wIndex) && ohci_at91->sfr_regmap) {
+				ohci_at91_port_suspend(ohci_at91->sfr_regmap,
+						       0);
+				return 0;
+			}
+			break;
+		}
+		break;
+	}
+
+	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength);
+	if (ret)
+		goto out;
+
+	switch (typeReq) {
+	case GetHubDescriptor:
+
+		/* update the hub's descriptor */
+
+		desc = (struct usb_hub_descriptor *)buf;
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		/* remove the old configurations for power-switching, and
+		 * over-current protection, and insert our new configuration
+		 */
+
+		desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+		desc->wHubCharacteristics |=
+			cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM);
+
+		if (pdata->overcurrent_supported) {
+			desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+			desc->wHubCharacteristics |=
+				cpu_to_le16(HUB_CHAR_INDV_PORT_OCPM);
+		}
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		return ret;
+
+	case GetPortStatus:
+		/* check port status */
+
+		dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+		if (valid_port(wIndex)) {
+			if (!ohci_at91_usb_get_power(pdata, wIndex))
+				*data &= ~cpu_to_le32(RH_PS_PPS);
+
+			if (pdata->overcurrent_changed[wIndex])
+				*data |= cpu_to_le32(RH_PS_OCIC);
+
+			if (pdata->overcurrent_status[wIndex])
+				*data |= cpu_to_le32(RH_PS_POCI);
+		}
+	}
+
+ out:
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev);
+	int val, port;
+
+	/* From the GPIO notifying the over-current situation, find
+	 * out the corresponding port */
+	at91_for_each_port(port) {
+		if (gpiod_to_irq(pdata->overcurrent_pin[port]) == irq)
+			break;
+	}
+
+	if (port == AT91_MAX_USBH_PORTS) {
+		dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
+		return IRQ_HANDLED;
+	}
+
+	val = gpiod_get_value(pdata->overcurrent_pin[port]);
+
+	/* When notified of an over-current situation, disable power
+	   on the corresponding port, and mark this port in
+	   over-current. */
+	if (!val) {
+		ohci_at91_usb_set_power(pdata, port, 0);
+		pdata->overcurrent_status[port]  = 1;
+		pdata->overcurrent_changed[port] = 1;
+	}
+
+	dev_dbg(& pdev->dev, "overcurrent situation %s\n",
+		val ? "exited" : "notified");
+
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id at91_ohci_dt_ids[] = {
+	{ .compatible = "atmel,at91rm9200-ohci" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct at91_usbh_data	*pdata;
+	int			i;
+	int			ret;
+	int			err;
+	u32			ports;
+
+	/* Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdev->dev.platform_data = pdata;
+
+	if (!of_property_read_u32(np, "num-ports", &ports))
+		pdata->ports = ports;
+
+	at91_for_each_port(i) {
+		if (i >= pdata->ports)
+			break;
+
+		pdata->vbus_pin[i] =
+			devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus",
+						      i, GPIOD_OUT_HIGH);
+		if (IS_ERR(pdata->vbus_pin[i])) {
+			err = PTR_ERR(pdata->vbus_pin[i]);
+			dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
+			continue;
+		}
+	}
+
+	at91_for_each_port(i) {
+		if (i >= pdata->ports)
+			break;
+
+		pdata->overcurrent_pin[i] =
+			devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
+						      i, GPIOD_IN);
+		if (!pdata->overcurrent_pin[i])
+			continue;
+		if (IS_ERR(pdata->overcurrent_pin[i])) {
+			err = PTR_ERR(pdata->overcurrent_pin[i]);
+			dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
+			continue;
+		}
+
+		ret = devm_request_irq(&pdev->dev,
+				       gpiod_to_irq(pdata->overcurrent_pin[i]),
+				       ohci_hcd_at91_overcurrent_irq,
+				       IRQF_SHARED,
+				       "ohci_overcurrent", pdev);
+		if (ret)
+			dev_info(&pdev->dev, "failed to request gpio \"overcurrent\" IRQ\n");
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+	return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
+}
+
+static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
+{
+	struct at91_usbh_data	*pdata = dev_get_platdata(&pdev->dev);
+	int			i;
+
+	if (pdata) {
+		at91_for_each_port(i)
+			ohci_at91_usb_set_power(pdata, i, 0);
+	}
+
+	device_init_wakeup(&pdev->dev, 0);
+	usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
+	return 0;
+}
+
+static int __maybe_unused
+ohci_hcd_at91_drv_suspend(struct device *dev)
+{
+	struct usb_hcd	*hcd = dev_get_drvdata(dev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+	int		ret;
+
+	/*
+	 * Disable wakeup if we are going to sleep with slow clock mode
+	 * enabled.
+	 */
+	ohci_at91->wakeup = device_may_wakeup(dev)
+			&& !at91_suspend_entering_slow_clock();
+
+	if (ohci_at91->wakeup)
+		enable_irq_wake(hcd->irq);
+
+	ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1);
+
+	ret = ohci_suspend(hcd, ohci_at91->wakeup);
+	if (ret) {
+		if (ohci_at91->wakeup)
+			disable_irq_wake(hcd->irq);
+		return ret;
+	}
+	/*
+	 * The integrated transceivers seem unable to notice disconnect,
+	 * reconnect, or wakeup without the 48 MHz clock active.  so for
+	 * correctness, always discard connection state (using reset).
+	 *
+	 * REVISIT: some boards will be able to turn VBUS off...
+	 */
+	if (!ohci_at91->wakeup) {
+		ohci->rh_state = OHCI_RH_HALTED;
+
+		/* flush the writes */
+		(void) ohci_readl (ohci, &ohci->regs->control);
+		at91_stop_clock(ohci_at91);
+	}
+
+	return ret;
+}
+
+static int __maybe_unused
+ohci_hcd_at91_drv_resume(struct device *dev)
+{
+	struct usb_hcd	*hcd = dev_get_drvdata(dev);
+	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+	if (ohci_at91->wakeup)
+		disable_irq_wake(hcd->irq);
+
+	at91_start_clock(ohci_at91);
+
+	ohci_resume(hcd, false);
+
+	ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ohci_hcd_at91_pm_ops, ohci_hcd_at91_drv_suspend,
+					ohci_hcd_at91_drv_resume);
+
+static struct platform_driver ohci_hcd_at91_driver = {
+	.probe		= ohci_hcd_at91_drv_probe,
+	.remove		= ohci_hcd_at91_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "at91_ohci",
+		.pm	= &ohci_hcd_at91_pm_ops,
+		.of_match_table	= at91_ohci_dt_ids,
+	},
+};
+
+static int __init ohci_at91_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+	ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides);
+
+	/*
+	 * The Atmel HW has some unusual quirks, which require Atmel-specific
+	 * workarounds. We override certain hc_driver functions here to
+	 * achieve that. We explicitly do not enhance ohci_driver_overrides to
+	 * allow this more easily, since this is an unusual case, and we don't
+	 * want to encourage others to override these functions by making it
+	 * too easy.
+	 */
+
+	ohci_at91_hc_driver.hub_status_data	= ohci_at91_hub_status_data;
+	ohci_at91_hc_driver.hub_control		= ohci_at91_hub_control;
+
+	return platform_driver_register(&ohci_hcd_at91_driver);
+}
+module_init(ohci_at91_init);
+
+static void __exit ohci_at91_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_at91_driver);
+}
+module_exit(ohci_at91_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_ohci");