Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 311 insertions, 0 deletions

diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c
new file mode 100644
index 000000000..0dd944277
--- /dev/null
+++ b/drivers/usb/host/uhci-pci.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UHCI HCD (Host Controller Driver) PCI Bus Glue.
+ *
+ * Extracted from uhci-hcd.c:
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
+ * (C) Copyright 1999 Randy Dunlap
+ * (C) Copyright 1999 Georg Acher, acher@in.tum.de
+ * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
+ * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
+ * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
+ * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
+ *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
+ * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
+ * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
+ */
+
+#include "pci-quirks.h"
+
+/*
+ * Make sure the controller is completely inactive, unable to
+ * generate interrupts or do DMA.
+ */
+static void uhci_pci_reset_hc(struct uhci_hcd *uhci)
+{
+	uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
+}
+
+/*
+ * Initialize a controller that was newly discovered or has just been
+ * resumed.  In either case we can't be sure of its previous state.
+ *
+ * Returns: 1 if the controller was reset, 0 otherwise.
+ */
+static int uhci_pci_check_and_reset_hc(struct uhci_hcd *uhci)
+{
+	return uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)),
+				uhci->io_addr);
+}
+
+/*
+ * Store the basic register settings needed by the controller.
+ * This function is called at the end of configure_hc in uhci-hcd.c.
+ */
+static void uhci_pci_configure_hc(struct uhci_hcd *uhci)
+{
+	struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
+
+	/* Enable PIRQ */
+	pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT);
+
+	/* Disable platform-specific non-PME# wakeup */
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+		pci_write_config_byte(pdev, USBRES_INTEL, 0);
+}
+
+static int uhci_pci_resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
+{
+	int port;
+
+	switch (to_pci_dev(uhci_dev(uhci))->vendor) {
+	default:
+		break;
+
+	case PCI_VENDOR_ID_GENESYS:
+		/* Genesys Logic's GL880S controllers don't generate
+		 * resume-detect interrupts.
+		 */
+		return 1;
+
+	case PCI_VENDOR_ID_INTEL:
+		/* Some of Intel's USB controllers have a bug that causes
+		 * resume-detect interrupts if any port has an over-current
+		 * condition.  To make matters worse, some motherboards
+		 * hardwire unused USB ports' over-current inputs active!
+		 * To prevent problems, we will not enable resume-detect
+		 * interrupts if any ports are OC.
+		 */
+		for (port = 0; port < uhci->rh_numports; ++port) {
+			if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
+					USBPORTSC_OC)
+				return 1;
+		}
+		break;
+	}
+	return 0;
+}
+
+static int uhci_pci_global_suspend_mode_is_broken(struct uhci_hcd *uhci)
+{
+	int port;
+	const char *sys_info;
+	static const char bad_Asus_board[] = "A7V8X";
+
+	/* One of Asus's motherboards has a bug which causes it to
+	 * wake up immediately from suspend-to-RAM if any of the ports
+	 * are connected.  In such cases we will not set EGSM.
+	 */
+	sys_info = dmi_get_system_info(DMI_BOARD_NAME);
+	if (sys_info && !strcmp(sys_info, bad_Asus_board)) {
+		for (port = 0; port < uhci->rh_numports; ++port) {
+			if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
+					USBPORTSC_CCS)
+				return 1;
+		}
+	}
+
+	return 0;
+}
+
+static int uhci_pci_init(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+	uhci->io_addr = (unsigned long) hcd->rsrc_start;
+
+	uhci->rh_numports = uhci_count_ports(hcd);
+
+	/* Intel controllers report the OverCurrent bit active on.
+	 * VIA controllers report it active off, so we'll adjust the
+	 * bit value.  (It's not standardized in the UHCI spec.)
+	 */
+	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA)
+		uhci->oc_low = 1;
+
+	/* HP's server management chip requires a longer port reset delay. */
+	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP)
+		uhci->wait_for_hp = 1;
+
+	/* Intel controllers use non-PME wakeup signalling */
+	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_INTEL)
+		device_set_wakeup_capable(uhci_dev(uhci), true);
+
+	/* Set up pointers to PCI-specific functions */
+	uhci->reset_hc = uhci_pci_reset_hc;
+	uhci->check_and_reset_hc = uhci_pci_check_and_reset_hc;
+	uhci->configure_hc = uhci_pci_configure_hc;
+	uhci->resume_detect_interrupts_are_broken =
+		uhci_pci_resume_detect_interrupts_are_broken;
+	uhci->global_suspend_mode_is_broken =
+		uhci_pci_global_suspend_mode_is_broken;
+
+
+	/* Kick BIOS off this hardware and reset if the controller
+	 * isn't already safely quiescent.
+	 */
+	check_and_reset_hc(uhci);
+	return 0;
+}
+
+/* Make sure the controller is quiescent and that we're not using it
+ * any more.  This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel.  Hence we
+ * do not acquire the spinlock before shutting down the controller.
+ */
+static void uhci_shutdown(struct pci_dev *pdev)
+{
+	struct usb_hcd *hcd = pci_get_drvdata(pdev);
+
+	uhci_hc_died(hcd_to_uhci(hcd));
+}
+
+#ifdef CONFIG_PM
+
+static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated);
+
+static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
+	int rc = 0;
+
+	dev_dbg(uhci_dev(uhci), "%s\n", __func__);
+
+	spin_lock_irq(&uhci->lock);
+	if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
+		goto done_okay;		/* Already suspended or dead */
+
+	/* All PCI host controllers are required to disable IRQ generation
+	 * at the source, so we must turn off PIRQ.
+	 */
+	pci_write_config_word(pdev, USBLEGSUP, 0);
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+	/* Enable platform-specific non-PME# wakeup */
+	if (do_wakeup) {
+		if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+			pci_write_config_byte(pdev, USBRES_INTEL,
+					USBPORT1EN | USBPORT2EN);
+	}
+
+done_okay:
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	spin_unlock_irq(&uhci->lock);
+
+	synchronize_irq(hcd->irq);
+
+	/* Check for race with a wakeup request */
+	if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
+		uhci_pci_resume(hcd, false);
+		rc = -EBUSY;
+	}
+	return rc;
+}
+
+static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+	dev_dbg(uhci_dev(uhci), "%s\n", __func__);
+
+	/* Since we aren't in D3 any more, it's safe to set this flag
+	 * even if the controller was dead.
+	 */
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	spin_lock_irq(&uhci->lock);
+
+	/* Make sure resume from hibernation re-enumerates everything */
+	if (hibernated) {
+		uhci->reset_hc(uhci);
+		finish_reset(uhci);
+	}
+
+	/* The firmware may have changed the controller settings during
+	 * a system wakeup.  Check it and reconfigure to avoid problems.
+	 */
+	else {
+		check_and_reset_hc(uhci);
+	}
+	configure_hc(uhci);
+
+	/* Tell the core if the controller had to be reset */
+	if (uhci->rh_state == UHCI_RH_RESET)
+		usb_root_hub_lost_power(hcd->self.root_hub);
+
+	spin_unlock_irq(&uhci->lock);
+
+	/* If interrupts don't work and remote wakeup is enabled then
+	 * the suspended root hub needs to be polled.
+	 */
+	if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup)
+		set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+	/* Does the root hub have a port wakeup pending? */
+	usb_hcd_poll_rh_status(hcd);
+	return 0;
+}
+
+#endif
+
+static const struct hc_driver uhci_driver = {
+	.description =		hcd_name,
+	.product_desc =		"UHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct uhci_hcd),
+
+	/* Generic hardware linkage */
+	.irq =			uhci_irq,
+	.flags =		HCD_USB11,
+
+	/* Basic lifecycle operations */
+	.reset =		uhci_pci_init,
+	.start =		uhci_start,
+#ifdef CONFIG_PM
+	.pci_suspend =		uhci_pci_suspend,
+	.pci_resume =		uhci_pci_resume,
+	.bus_suspend =		uhci_rh_suspend,
+	.bus_resume =		uhci_rh_resume,
+#endif
+	.stop =			uhci_stop,
+
+	.urb_enqueue =		uhci_urb_enqueue,
+	.urb_dequeue =		uhci_urb_dequeue,
+
+	.endpoint_disable =	uhci_hcd_endpoint_disable,
+	.get_frame_number =	uhci_hcd_get_frame_number,
+
+	.hub_status_data =	uhci_hub_status_data,
+	.hub_control =		uhci_hub_control,
+};
+
+static const struct pci_device_id uhci_pci_ids[] = { {
+	/* handle any USB UHCI controller */
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0),
+	.driver_data =	(unsigned long) &uhci_driver,
+	}, { /* end: all zeroes */ }
+};
+
+MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
+
+static struct pci_driver uhci_pci_driver = {
+	.name =		(char *)hcd_name,
+	.id_table =	uhci_pci_ids,
+
+	.probe =	usb_hcd_pci_probe,
+	.remove =	usb_hcd_pci_remove,
+	.shutdown =	uhci_shutdown,
+
+#ifdef CONFIG_PM
+	.driver =	{
+		.pm =	&usb_hcd_pci_pm_ops
+	},
+#endif
+};
+
+MODULE_SOFTDEP("pre: ehci_pci");