Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 286 insertions, 0 deletions

diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
new file mode 100644
index 000000000..482590237
--- /dev/null
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for emulating SAT (ata pass through) on devices based
+ *       on the Cypress USB/ATA bridge supporting ATACB.
+ *
+ * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr)
+ */
+
+#include <linux/module.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_eh.h>
+#include <linux/ata.h>
+
+#include "usb.h"
+#include "protocol.h"
+#include "scsiglue.h"
+#include "debug.h"
+
+#define DRV_NAME "ums-cypress"
+
+MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB");
+MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id cypress_usb_ids[] = {
+#	include "unusual_cypress.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, cypress_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev cypress_unusual_dev_list[] = {
+#	include "unusual_cypress.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/*
+ * ATACB is a protocol used on cypress usb<->ata bridge to
+ * send raw ATA command over mass storage
+ * There is a ATACB2 protocol that support LBA48 on newer chip.
+ * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf
+ * datasheet from cypress.com.
+ */
+static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
+{
+	unsigned char save_cmnd[MAX_COMMAND_SIZE];
+
+	if (likely(srb->cmnd[0] != ATA_16 && srb->cmnd[0] != ATA_12)) {
+		usb_stor_transparent_scsi_command(srb, us);
+		return;
+	}
+
+	memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd));
+	memset(srb->cmnd, 0, MAX_COMMAND_SIZE);
+
+	/* check if we support the command */
+	if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */
+		goto invalid_fld;
+	/* check protocol */
+	switch ((save_cmnd[1] >> 1) & 0xf) {
+	case 3: /*no DATA */
+	case 4: /* PIO in */
+	case 5: /* PIO out */
+		break;
+	default:
+		goto invalid_fld;
+	}
+
+	/* first build the ATACB command */
+	srb->cmd_len = 16;
+
+	srb->cmnd[0] = 0x24; /*
+			      * bVSCBSignature : vendor-specific command
+			      * this value can change, but most(all ?) manufacturers
+			      * keep the cypress default : 0x24
+			      */
+	srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */
+
+	srb->cmnd[3] = 0xff - 1; /*
+				  * features, sector count, lba low, lba med
+				  * lba high, device, command are valid
+				  */
+	srb->cmnd[4] = 1; /* TransferBlockCount : 512 */
+
+	if (save_cmnd[0] == ATA_16) {
+		srb->cmnd[ 6] = save_cmnd[ 4]; /* features */
+		srb->cmnd[ 7] = save_cmnd[ 6]; /* sector count */
+		srb->cmnd[ 8] = save_cmnd[ 8]; /* lba low */
+		srb->cmnd[ 9] = save_cmnd[10]; /* lba med */
+		srb->cmnd[10] = save_cmnd[12]; /* lba high */
+		srb->cmnd[11] = save_cmnd[13]; /* device */
+		srb->cmnd[12] = save_cmnd[14]; /* command */
+
+		if (save_cmnd[1] & 0x01) {/* extended bit set for LBA48 */
+			/* this could be supported by atacb2 */
+			if (save_cmnd[3] || save_cmnd[5] || save_cmnd[7] || save_cmnd[9]
+					|| save_cmnd[11])
+				goto invalid_fld;
+		}
+	} else { /* ATA12 */
+		srb->cmnd[ 6] = save_cmnd[3]; /* features */
+		srb->cmnd[ 7] = save_cmnd[4]; /* sector count */
+		srb->cmnd[ 8] = save_cmnd[5]; /* lba low */
+		srb->cmnd[ 9] = save_cmnd[6]; /* lba med */
+		srb->cmnd[10] = save_cmnd[7]; /* lba high */
+		srb->cmnd[11] = save_cmnd[8]; /* device */
+		srb->cmnd[12] = save_cmnd[9]; /* command */
+
+	}
+	/* Filter SET_FEATURES - XFER MODE command */
+	if ((srb->cmnd[12] == ATA_CMD_SET_FEATURES)
+			&& (srb->cmnd[6] == SETFEATURES_XFER))
+		goto invalid_fld;
+
+	if (srb->cmnd[12] == ATA_CMD_ID_ATA || srb->cmnd[12] == ATA_CMD_ID_ATAPI)
+		srb->cmnd[2] |= (1<<7); /* set  IdentifyPacketDevice for these cmds */
+
+
+	usb_stor_transparent_scsi_command(srb, us);
+
+	/* if the device doesn't support ATACB */
+	if (srb->result == SAM_STAT_CHECK_CONDITION &&
+			memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB,
+				sizeof(usb_stor_sense_invalidCDB)) == 0) {
+		usb_stor_dbg(us, "cypress atacb not supported ???\n");
+		goto end;
+	}
+
+	/*
+	 * if ck_cond flags is set, and there wasn't critical error,
+	 * build the special sense
+	 */
+	if ((srb->result != (DID_ERROR << 16) &&
+				srb->result != (DID_ABORT << 16)) &&
+			save_cmnd[2] & 0x20) {
+		struct scsi_eh_save ses;
+		unsigned char regs[8];
+		unsigned char *sb = srb->sense_buffer;
+		unsigned char *desc = sb + 8;
+		int tmp_result;
+
+		/* build the command for reading the ATA registers */
+		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
+
+		/*
+		 * we use the same command as before, but we set
+		 * the read taskfile bit, for not executing atacb command,
+		 * but reading register selected in srb->cmnd[4]
+		 */
+		srb->cmd_len = 16;
+		srb->cmnd = ses.cmnd;
+		srb->cmnd[2] = 1;
+
+		usb_stor_transparent_scsi_command(srb, us);
+		memcpy(regs, srb->sense_buffer, sizeof(regs));
+		tmp_result = srb->result;
+		scsi_eh_restore_cmnd(srb, &ses);
+		/* we fail to get registers, report invalid command */
+		if (tmp_result != SAM_STAT_GOOD)
+			goto invalid_fld;
+
+		/* build the sense */
+		memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+		/* set sk, asc for a good command */
+		sb[1] = RECOVERED_ERROR;
+		sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */
+		sb[3] = 0x1D;
+
+		/*
+		 * XXX we should generate sk, asc, ascq from status and error
+		 * regs
+		 * (see 11.1 Error translation ATA device error to SCSI error
+		 * map, and ata_to_sense_error from libata.)
+		 */
+
+		/* Sense data is current and format is descriptor. */
+		sb[0] = 0x72;
+		desc[0] = 0x09; /* ATA_RETURN_DESCRIPTOR */
+
+		/* set length of additional sense data */
+		sb[7] = 14;
+		desc[1] = 12;
+
+		/* Copy registers into sense buffer. */
+		desc[ 2] = 0x00;
+		desc[ 3] = regs[1];  /* features */
+		desc[ 5] = regs[2];  /* sector count */
+		desc[ 7] = regs[3];  /* lba low */
+		desc[ 9] = regs[4];  /* lba med */
+		desc[11] = regs[5];  /* lba high */
+		desc[12] = regs[6];  /* device */
+		desc[13] = regs[7];  /* command */
+
+		srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+	}
+	goto end;
+invalid_fld:
+	srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+	memcpy(srb->sense_buffer,
+			usb_stor_sense_invalidCDB,
+			sizeof(usb_stor_sense_invalidCDB));
+end:
+	memcpy(srb->cmnd, save_cmnd, sizeof(save_cmnd));
+	if (srb->cmnd[0] == ATA_12)
+		srb->cmd_len = 12;
+}
+
+static struct scsi_host_template cypress_host_template;
+
+static int cypress_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+	struct usb_device *device;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - cypress_usb_ids) + cypress_unusual_dev_list,
+			&cypress_host_template);
+	if (result)
+		return result;
+
+	/*
+	 * Among CY7C68300 chips, the A revision does not support Cypress ATACB
+	 * Filter out this revision from EEPROM default descriptor values
+	 */
+	device = interface_to_usbdev(intf);
+	if (device->descriptor.iManufacturer != 0x38 ||
+	    device->descriptor.iProduct != 0x4e ||
+	    device->descriptor.iSerialNumber != 0x64) {
+		us->protocol_name = "Transparent SCSI with Cypress ATACB";
+		us->proto_handler = cypress_atacb_passthrough;
+	} else {
+		us->protocol_name = "Transparent SCSI";
+		us->proto_handler = usb_stor_transparent_scsi_command;
+	}
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver cypress_driver = {
+	.name =		DRV_NAME,
+	.probe =	cypress_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	cypress_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(cypress_driver, cypress_host_template, DRV_NAME);