Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 682 insertions, 0 deletions

diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
new file mode 100644
index 000000000..917f170c4
--- /dev/null
+++ b/drivers/usb/storage/jumpshot.c
@@ -0,0 +1,682 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Lexar "Jumpshot" Compact Flash reader
+ *
+ * jumpshot driver v0.1:
+ *
+ * First release
+ *
+ * Current development and maintenance by:
+ *   (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org)
+ *
+ *   Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver
+ *   which I used as a template for this driver.
+ *
+ *   Some bugfixes and scatter-gather code by Gregory P. Smith 
+ *   (greg-usb@electricrain.com)
+ *
+ *   Fix for media change by Joerg Schneider (js@joergschneider.com)
+ *
+ * Developed with the assistance of:
+ *
+ *   (C) 2002 Alan Stern <stern@rowland.org>
+ */
+ 
+ /*
+  * This driver attempts to support the Lexar Jumpshot USB CompactFlash 
+  * reader.  Like many other USB CompactFlash readers, the Jumpshot contains
+  * a USB-to-ATA chip. 
+  *
+  * This driver supports reading and writing.  If you're truly paranoid,
+  * however, you can force the driver into a write-protected state by setting
+  * the WP enable bits in jumpshot_handle_mode_sense.  See the comments
+  * in that routine.
+  */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-jumpshot"
+
+MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader");
+MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+static struct usb_device_id jumpshot_usb_ids[] = {
+#	include "unusual_jumpshot.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev jumpshot_unusual_dev_list[] = {
+#	include "unusual_jumpshot.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+struct jumpshot_info {
+   unsigned long   sectors;     /* total sector count */
+   unsigned long   ssize;       /* sector size in bytes */
+
+   /* the following aren't used yet */
+   unsigned char   sense_key;
+   unsigned long   sense_asc;   /* additional sense code */
+   unsigned long   sense_ascq;  /* additional sense code qualifier */
+};
+
+static inline int jumpshot_bulk_read(struct us_data *us,
+				     unsigned char *data, 
+				     unsigned int len)
+{
+	if (len == 0)
+		return USB_STOR_XFER_GOOD;
+
+	usb_stor_dbg(us, "len = %d\n", len);
+	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			data, len, NULL);
+}
+
+
+static inline int jumpshot_bulk_write(struct us_data *us,
+				      unsigned char *data, 
+				      unsigned int len)
+{
+	if (len == 0)
+		return USB_STOR_XFER_GOOD;
+
+	usb_stor_dbg(us, "len = %d\n", len);
+	return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+			data, len, NULL);
+}
+
+
+static int jumpshot_get_status(struct us_data  *us)
+{
+	int rc;
+
+	if (!us)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	// send the setup
+	rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
+				   0, 0xA0, 0, 7, us->iobuf, 1);
+
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	if (us->iobuf[0] != 0x50) {
+		usb_stor_dbg(us, "0x%2x\n", us->iobuf[0]);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int jumpshot_read_data(struct us_data *us,
+			      struct jumpshot_info *info,
+			      u32 sector,
+			      u32 sectors)
+{
+	unsigned char *command = us->iobuf;
+	unsigned char *buffer;
+	unsigned char  thistime;
+	unsigned int totallen, alloclen;
+	int len, result;
+	unsigned int sg_offset = 0;
+	struct scatterlist *sg = NULL;
+
+	// we're working in LBA mode.  according to the ATA spec, 
+	// we can support up to 28-bit addressing.  I don't know if Jumpshot
+	// supports beyond 24-bit addressing.  It's kind of hard to test 
+	// since it requires > 8GB CF card.
+
+	if (sector > 0x0FFFFFFF)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	totallen = sectors * info->ssize;
+
+	// Since we don't read more than 64 KB at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	alloclen = min(totallen, 65536u);
+	buffer = kmalloc(alloclen, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	do {
+		// loop, never allocate or transfer more than 64k at once
+		// (min(128k, 255*info->ssize) is the real limit)
+		len = min(totallen, alloclen);
+		thistime = (len / info->ssize) & 0xff;
+
+		command[0] = 0;
+		command[1] = thistime;
+		command[2] = sector & 0xFF;
+		command[3] = (sector >>  8) & 0xFF;
+		command[4] = (sector >> 16) & 0xFF;
+
+		command[5] = 0xE0 | ((sector >> 24) & 0x0F);
+		command[6] = 0x20;
+
+		// send the setup + command
+		result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+					       0, 0x20, 0, 1, command, 7);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		// read the result
+		result = jumpshot_bulk_read(us, buffer, len);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		usb_stor_dbg(us, "%d bytes\n", len);
+
+		// Store the data in the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				 &sg, &sg_offset, TO_XFER_BUF);
+
+		sector += thistime;
+		totallen -= len;
+	} while (totallen > 0);
+
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+
+static int jumpshot_write_data(struct us_data *us,
+			       struct jumpshot_info *info,
+			       u32 sector,
+			       u32 sectors)
+{
+	unsigned char *command = us->iobuf;
+	unsigned char *buffer;
+	unsigned char  thistime;
+	unsigned int totallen, alloclen;
+	int len, result, waitcount;
+	unsigned int sg_offset = 0;
+	struct scatterlist *sg = NULL;
+
+	// we're working in LBA mode.  according to the ATA spec, 
+	// we can support up to 28-bit addressing.  I don't know if Jumpshot
+	// supports beyond 24-bit addressing.  It's kind of hard to test 
+	// since it requires > 8GB CF card.
+	//
+	if (sector > 0x0FFFFFFF)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	totallen = sectors * info->ssize;
+
+	// Since we don't write more than 64 KB at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	alloclen = min(totallen, 65536u);
+	buffer = kmalloc(alloclen, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	do {
+		// loop, never allocate or transfer more than 64k at once
+		// (min(128k, 255*info->ssize) is the real limit)
+
+		len = min(totallen, alloclen);
+		thistime = (len / info->ssize) & 0xff;
+
+		// Get the data from the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+				&sg, &sg_offset, FROM_XFER_BUF);
+
+		command[0] = 0;
+		command[1] = thistime;
+		command[2] = sector & 0xFF;
+		command[3] = (sector >>  8) & 0xFF;
+		command[4] = (sector >> 16) & 0xFF;
+
+		command[5] = 0xE0 | ((sector >> 24) & 0x0F);
+		command[6] = 0x30;
+
+		// send the setup + command
+		result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+			0, 0x20, 0, 1, command, 7);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		// send the data
+		result = jumpshot_bulk_write(us, buffer, len);
+		if (result != USB_STOR_XFER_GOOD)
+			goto leave;
+
+		// read the result.  apparently the bulk write can complete
+		// before the jumpshot drive is finished writing.  so we loop
+		// here until we get a good return code
+		waitcount = 0;
+		do {
+			result = jumpshot_get_status(us);
+			if (result != USB_STOR_TRANSPORT_GOOD) {
+				// I have not experimented to find the smallest value.
+				//
+				msleep(50); 
+			}
+		} while ((result != USB_STOR_TRANSPORT_GOOD) && (waitcount < 10));
+
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			usb_stor_dbg(us, "Gah!  Waitcount = 10.  Bad write!?\n");
+
+		sector += thistime;
+		totallen -= len;
+	} while (totallen > 0);
+
+	kfree(buffer);
+	return result;
+
+ leave:
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+static int jumpshot_id_device(struct us_data *us,
+			      struct jumpshot_info *info)
+{
+	unsigned char *command = us->iobuf;
+	unsigned char *reply;
+	int 	 rc;
+
+	if (!info)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	command[0] = 0xE0;
+	command[1] = 0xEC;
+	reply = kmalloc(512, GFP_NOIO);
+	if (!reply)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	// send the setup
+	rc = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+				   0, 0x20, 0, 6, command, 2);
+
+	if (rc != USB_STOR_XFER_GOOD) {
+		usb_stor_dbg(us, "Gah! send_control for read_capacity failed\n");
+		rc = USB_STOR_TRANSPORT_ERROR;
+		goto leave;
+	}
+
+	// read the reply
+	rc = jumpshot_bulk_read(us, reply, 512);
+	if (rc != USB_STOR_XFER_GOOD) {
+		rc = USB_STOR_TRANSPORT_ERROR;
+		goto leave;
+	}
+
+	info->sectors = ((u32)(reply[117]) << 24) |
+			((u32)(reply[116]) << 16) |
+			((u32)(reply[115]) <<  8) |
+			((u32)(reply[114])      );
+
+	rc = USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+	kfree(reply);
+	return rc;
+}
+
+static int jumpshot_handle_mode_sense(struct us_data *us,
+				      struct scsi_cmnd * srb, 
+				      int sense_6)
+{
+	static unsigned char rw_err_page[12] = {
+		0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0
+	};
+	static unsigned char cache_page[12] = {
+		0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0
+	};
+	static unsigned char rbac_page[12] = {
+		0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0
+	};
+	static unsigned char timer_page[8] = {
+		0x1C, 0x6, 0, 0, 0, 0
+	};
+	unsigned char pc, page_code;
+	unsigned int i = 0;
+	struct jumpshot_info *info = (struct jumpshot_info *) (us->extra);
+	unsigned char *ptr = us->iobuf;
+
+	pc = srb->cmnd[2] >> 6;
+	page_code = srb->cmnd[2] & 0x3F;
+
+	switch (pc) {
+	   case 0x0:
+		   usb_stor_dbg(us, "Current values\n");
+		   break;
+	   case 0x1:
+		   usb_stor_dbg(us, "Changeable values\n");
+		   break;
+	   case 0x2:
+		   usb_stor_dbg(us, "Default values\n");
+		   break;
+	   case 0x3:
+		   usb_stor_dbg(us, "Saves values\n");
+		   break;
+	}
+
+	memset(ptr, 0, 8);
+	if (sense_6) {
+		ptr[2] = 0x00;		// WP enable: 0x80
+		i = 4;
+	} else {
+		ptr[3] = 0x00;		// WP enable: 0x80
+		i = 8;
+	}
+
+	switch (page_code) {
+	   case 0x0:
+		// vendor-specific mode
+		info->sense_key = 0x05;
+		info->sense_asc = 0x24;
+		info->sense_ascq = 0x00;
+		return USB_STOR_TRANSPORT_FAILED;
+
+	   case 0x1:
+		memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
+		i += sizeof(rw_err_page);
+		break;
+
+	   case 0x8:
+		memcpy(ptr + i, cache_page, sizeof(cache_page));
+		i += sizeof(cache_page);
+		break;
+
+	   case 0x1B:
+		memcpy(ptr + i, rbac_page, sizeof(rbac_page));
+		i += sizeof(rbac_page);
+		break;
+
+	   case 0x1C:
+		memcpy(ptr + i, timer_page, sizeof(timer_page));
+		i += sizeof(timer_page);
+		break;
+
+	   case 0x3F:
+		memcpy(ptr + i, timer_page, sizeof(timer_page));
+		i += sizeof(timer_page);
+		memcpy(ptr + i, rbac_page, sizeof(rbac_page));
+		i += sizeof(rbac_page);
+		memcpy(ptr + i, cache_page, sizeof(cache_page));
+		i += sizeof(cache_page);
+		memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
+		i += sizeof(rw_err_page);
+		break;
+	}
+
+	if (sense_6)
+		ptr[0] = i - 1;
+	else
+		((__be16 *) ptr)[0] = cpu_to_be16(i - 2);
+	usb_stor_set_xfer_buf(ptr, i, srb);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+
+static void jumpshot_info_destructor(void *extra)
+{
+	// this routine is a placeholder...
+	// currently, we don't allocate any extra blocks so we're okay
+}
+
+
+
+// Transport for the Lexar 'Jumpshot'
+//
+static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	struct jumpshot_info *info;
+	int rc;
+	unsigned long block, blocks;
+	unsigned char *ptr = us->iobuf;
+	static unsigned char inquiry_response[8] = {
+		0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+	};
+
+	if (!us->extra) {
+		us->extra = kzalloc(sizeof(struct jumpshot_info), GFP_NOIO);
+		if (!us->extra)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		us->extra_destructor = jumpshot_info_destructor;
+	}
+
+	info = (struct jumpshot_info *) (us->extra);
+
+	if (srb->cmnd[0] == INQUIRY) {
+		usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
+		memcpy(ptr, inquiry_response, sizeof(inquiry_response));
+		fill_inquiry_response(us, ptr, 36);
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == READ_CAPACITY) {
+		info->ssize = 0x200;  // hard coded 512 byte sectors as per ATA spec
+
+		rc = jumpshot_get_status(us);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		rc = jumpshot_id_device(us, info);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		usb_stor_dbg(us, "READ_CAPACITY:  %ld sectors, %ld bytes per sector\n",
+			     info->sectors, info->ssize);
+
+		// build the reply
+		//
+		((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
+		((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
+		usb_stor_set_xfer_buf(ptr, 8, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == MODE_SELECT_10) {
+		usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	if (srb->cmnd[0] == READ_10) {
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+		usb_stor_dbg(us, "READ_10: read block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return jumpshot_read_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == READ_12) {
+		// I don't think we'll ever see a READ_12 but support it anyway...
+		//
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+			 ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
+
+		usb_stor_dbg(us, "READ_12: read block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return jumpshot_read_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == WRITE_10) {
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+		usb_stor_dbg(us, "WRITE_10: write block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return jumpshot_write_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == WRITE_12) {
+		// I don't think we'll ever see a WRITE_12 but support it anyway...
+		//
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+			((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+			 ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
+
+		usb_stor_dbg(us, "WRITE_12: write block 0x%04lx  count %ld\n",
+			     block, blocks);
+		return jumpshot_write_data(us, info, block, blocks);
+	}
+
+
+	if (srb->cmnd[0] == TEST_UNIT_READY) {
+		usb_stor_dbg(us, "TEST_UNIT_READY\n");
+		return jumpshot_get_status(us);
+	}
+
+	if (srb->cmnd[0] == REQUEST_SENSE) {
+		usb_stor_dbg(us, "REQUEST_SENSE\n");
+
+		memset(ptr, 0, 18);
+		ptr[0] = 0xF0;
+		ptr[2] = info->sense_key;
+		ptr[7] = 11;
+		ptr[12] = info->sense_asc;
+		ptr[13] = info->sense_ascq;
+		usb_stor_set_xfer_buf(ptr, 18, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == MODE_SENSE) {
+		usb_stor_dbg(us, "MODE_SENSE_6 detected\n");
+		return jumpshot_handle_mode_sense(us, srb, 1);
+	}
+
+	if (srb->cmnd[0] == MODE_SENSE_10) {
+		usb_stor_dbg(us, "MODE_SENSE_10 detected\n");
+		return jumpshot_handle_mode_sense(us, srb, 0);
+	}
+
+	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+		/*
+		 * sure.  whatever.  not like we can stop the user from popping
+		 * the media out of the device (no locking doors, etc)
+		 */
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == START_STOP) {
+		/*
+		 * this is used by sd.c'check_scsidisk_media_change to detect
+		 * media change
+		 */
+		usb_stor_dbg(us, "START_STOP\n");
+		/*
+		 * the first jumpshot_id_device after a media change returns
+		 * an error (determined experimentally)
+		 */
+		rc = jumpshot_id_device(us, info);
+		if (rc == USB_STOR_TRANSPORT_GOOD) {
+			info->sense_key = NO_SENSE;
+			srb->result = SUCCESS;
+		} else {
+			info->sense_key = UNIT_ATTENTION;
+			srb->result = SAM_STAT_CHECK_CONDITION;
+		}
+		return rc;
+	}
+
+	usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+		     srb->cmnd[0], srb->cmnd[0]);
+	info->sense_key = 0x05;
+	info->sense_asc = 0x20;
+	info->sense_ascq = 0x00;
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+static struct scsi_host_template jumpshot_host_template;
+
+static int jumpshot_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - jumpshot_usb_ids) + jumpshot_unusual_dev_list,
+			&jumpshot_host_template);
+	if (result)
+		return result;
+
+	us->transport_name  = "Lexar Jumpshot Control/Bulk";
+	us->transport = jumpshot_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+	us->max_lun = 1;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver jumpshot_driver = {
+	.name =		DRV_NAME,
+	.probe =	jumpshot_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	jumpshot_usb_ids,
+	.soft_unbind =	1,
+	.no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(jumpshot_driver, jumpshot_host_template, DRV_NAME);