Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

37 files changed, 12436 insertions, 0 deletions

diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig
new file mode 100644
index 000000000..afac2588d
--- /dev/null
+++ b/drivers/uwb/Kconfig
@@ -0,0 +1,71 @@
+#
+# UWB device configuration
+#
+
+menuconfig UWB
+	tristate "Ultra Wideband devices"
+	default n
+	select GENERIC_NET_UTILS
+	help
+	  UWB is a high-bandwidth, low-power, point-to-point radio
+	  technology using a wide spectrum (3.1-10.6GHz). It is
+	  optimized for in-room use (480Mbps at 2 meters, 110Mbps at
+	  10m). It serves as the transport layer for other protocols,
+	  such as Wireless USB (WUSB).
+
+	  The topology is peer to peer; however, higher level
+	  protocols (such as WUSB) might impose a master/slave
+	  relationship.
+
+	  Say Y here if your computer has UWB radio controllers (USB or PCI)
+	  based. You will need to enable the radio controllers
+	  below.  It is ok to select all of them, no harm done.
+
+	  For more help check the UWB and WUSB related files in
+	  <file:Documentation/usb/>.
+
+	  To compile the UWB stack as a module, choose M here.
+
+if UWB
+
+config UWB_HWA
+	tristate "UWB Radio Control driver for WUSB-compliant USB dongles (HWA)"
+	depends on USB
+	help
+	  This driver enables the radio controller for HWA USB
+	  devices. HWA stands for Host Wire Adapter, and it is a UWB
+	  Radio Controller connected to your system via USB. Most of
+	  them come with a Wireless USB host controller also.
+
+	  To compile this driver select Y (built in) or M (module). It
+	  is safe to select any even if you do not have the hardware.
+
+config UWB_WHCI
+        tristate "UWB Radio Control driver for WHCI-compliant cards"
+        depends on PCI
+        help
+          This driver enables the radio controller for WHCI cards.
+
+          WHCI is a specification developed by Intel
+          (http://www.intel.com/technology/comms/wusb/whci.htm) much
+          in the spirit of USB's EHCI, but for UWB and Wireless USB
+          radio/host controllers connected via memory mapping (eg:
+          PCI). Most of these cards come also with a Wireless USB host
+          controller.
+
+          To compile this driver select Y (built in) or M (module). It
+          is safe to select any even if you do not have the hardware.
+
+config UWB_I1480U
+        tristate "Support for Intel Wireless UWB Link 1480 HWA"
+        depends on UWB_HWA
+        select FW_LOADER
+        help
+         This driver enables support for the i1480 when connected via
+         USB. It consists of a firmware uploader that will enable it
+         to behave as an HWA device.
+
+         To compile this driver select Y (built in) or M (module). It
+         is safe to select any even if you do not have the hardware.
+
+endif # UWB
diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile
new file mode 100644
index 000000000..32f4de7af
--- /dev/null
+++ b/drivers/uwb/Makefile
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_UWB)		+= uwb.o
+obj-$(CONFIG_UWB_WHCI)		+= umc.o whci.o whc-rc.o
+obj-$(CONFIG_UWB_HWA)		+= hwa-rc.o
+obj-$(CONFIG_UWB_I1480U)	+= i1480/
+
+uwb-objs :=		\
+	address.o	\
+	allocator.o	\
+	beacon.o	\
+	driver.o	\
+	drp.o		\
+	drp-avail.o	\
+	drp-ie.o	\
+	est.o		\
+	ie.o		\
+	ie-rcv.o	\
+	lc-dev.o	\
+	lc-rc.o		\
+	neh.o		\
+	pal.o		\
+	radio.o		\
+	reset.o		\
+	rsv.o		\
+	scan.o		\
+	uwb-debug.o	\
+	uwbd.o
+
+umc-objs :=		\
+	umc-bus.o	\
+	umc-dev.o	\
+	umc-drv.o
diff --git a/drivers/uwb/address.c b/drivers/uwb/address.c
new file mode 100644
index 000000000..2833be9cb
--- /dev/null
+++ b/drivers/uwb/address.c
@@ -0,0 +1,366 @@
+/*
+ * Ultra Wide Band
+ * Address management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/random.h>
+#include <linux/etherdevice.h>
+
+#include "uwb-internal.h"
+
+
+/** Device Address Management command */
+struct uwb_rc_cmd_dev_addr_mgmt {
+	struct uwb_rccb rccb;
+	u8 bmOperationType;
+	u8 baAddr[6];
+} __attribute__((packed));
+
+
+/**
+ * Low level command for setting/getting UWB radio's addresses
+ *
+ * @hwarc:	HWA Radio Control interface instance
+ * @bmOperationType:
+ * 		Set/get, MAC/DEV (see WUSB1.0[8.6.2.2])
+ * @baAddr:	address buffer--assumed to have enough data to hold
+ *              the address type requested.
+ * @reply:	Pointer to reply buffer (can be stack allocated)
+ * @returns:	0 if ok, < 0 errno code on error.
+ *
+ * @cmd has to be allocated because USB cannot grok USB or vmalloc
+ * buffers depending on your combination of host architecture.
+ */
+static
+int uwb_rc_dev_addr_mgmt(struct uwb_rc *rc,
+			 u8 bmOperationType, const u8 *baAddr,
+			 struct uwb_rc_evt_dev_addr_mgmt *reply)
+{
+	int result;
+	struct uwb_rc_cmd_dev_addr_mgmt *cmd;
+
+	result = -ENOMEM;
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		goto error_kzalloc;
+	cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+	cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_DEV_ADDR_MGMT);
+	cmd->bmOperationType = bmOperationType;
+	if (baAddr) {
+		size_t size = 0;
+		switch (bmOperationType >> 1) {
+		case 0:	size = 2; break;
+		case 1:	size = 6; break;
+		default: BUG();
+		}
+		memcpy(cmd->baAddr, baAddr, size);
+	}
+	reply->rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply->rceb.wEvent = UWB_RC_CMD_DEV_ADDR_MGMT;
+	result = uwb_rc_cmd(rc, "DEV-ADDR-MGMT",
+			    &cmd->rccb, sizeof(*cmd),
+			    &reply->rceb, sizeof(*reply));
+	if (result < 0)
+		goto error_cmd;
+	if (result < sizeof(*reply)) {
+		dev_err(&rc->uwb_dev.dev,
+			"DEV-ADDR-MGMT: not enough data replied: "
+			"%d vs %zu bytes needed\n", result, sizeof(*reply));
+		result = -ENOMSG;
+	} else if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(&rc->uwb_dev.dev,
+			"DEV-ADDR-MGMT: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply->bResultCode),
+			reply->bResultCode);
+		result = -EIO;
+	} else
+		result = 0;
+error_cmd:
+	kfree(cmd);
+error_kzalloc:
+	return result;
+}
+
+
+/**
+ * Set the UWB RC MAC or device address.
+ *
+ * @rc:      UWB Radio Controller
+ * @_addr:   Pointer to address to write [assumed to be either a
+ *           'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *'].
+ * @type:    Type of address to set (UWB_ADDR_DEV or UWB_ADDR_MAC).
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * Some anal retentivity here: even if both 'struct
+ * uwb_{dev,mac}_addr' have the actual byte array in the same offset
+ * and I could just pass _addr to hwarc_cmd_dev_addr_mgmt(), I prefer
+ * to use some syntatic sugar in case someday we decide to change the
+ * format of the structs. The compiler will optimize it out anyway.
+ */
+static int uwb_rc_addr_set(struct uwb_rc *rc,
+		    const void *_addr, enum uwb_addr_type type)
+{
+	int result;
+	u8 bmOperationType = 0x1; 		/* Set address */
+	const struct uwb_dev_addr *dev_addr = _addr;
+	const struct uwb_mac_addr *mac_addr = _addr;
+	struct uwb_rc_evt_dev_addr_mgmt reply;
+	const u8 *baAddr;
+
+	result = -EINVAL;
+	switch (type) {
+	case UWB_ADDR_DEV:
+		baAddr = dev_addr->data;
+		break;
+	case UWB_ADDR_MAC:
+		baAddr = mac_addr->data;
+		bmOperationType |= 0x2;
+		break;
+	default:
+		return result;
+	}
+	return uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &reply);
+}
+
+
+/**
+ * Get the UWB radio's MAC or device address.
+ *
+ * @rc:      UWB Radio Controller
+ * @_addr:   Where to write the address data [assumed to be either a
+ *           'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *'].
+ * @type:    Type of address to get (UWB_ADDR_DEV or UWB_ADDR_MAC).
+ * @returns: 0 if ok (and *_addr set), < 0 errno code on error.
+ *
+ * See comment in uwb_rc_addr_set() about anal retentivity in the
+ * type handling of the address variables.
+ */
+static int uwb_rc_addr_get(struct uwb_rc *rc,
+		    void *_addr, enum uwb_addr_type type)
+{
+	int result;
+	u8 bmOperationType = 0x0; 		/* Get address */
+	struct uwb_rc_evt_dev_addr_mgmt evt;
+	struct uwb_dev_addr *dev_addr = _addr;
+	struct uwb_mac_addr *mac_addr = _addr;
+	u8 *baAddr;
+
+	result = -EINVAL;
+	switch (type) {
+	case UWB_ADDR_DEV:
+		baAddr = dev_addr->data;
+		break;
+	case UWB_ADDR_MAC:
+		bmOperationType |= 0x2;
+		baAddr = mac_addr->data;
+		break;
+	default:
+		return result;
+	}
+	result = uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &evt);
+	if (result == 0)
+		switch (type) {
+		case UWB_ADDR_DEV:
+			memcpy(&dev_addr->data, evt.baAddr,
+			       sizeof(dev_addr->data));
+			break;
+		case UWB_ADDR_MAC:
+			memcpy(&mac_addr->data, evt.baAddr,
+			       sizeof(mac_addr->data));
+			break;
+		default:		/* shut gcc up */
+			BUG();
+		}
+	return result;
+}
+
+
+/** Get @rc's MAC address to @addr */
+int uwb_rc_mac_addr_get(struct uwb_rc *rc,
+			struct uwb_mac_addr *addr) {
+	return uwb_rc_addr_get(rc, addr, UWB_ADDR_MAC);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_mac_addr_get);
+
+
+/** Get @rc's device address to @addr */
+int uwb_rc_dev_addr_get(struct uwb_rc *rc,
+			struct uwb_dev_addr *addr) {
+	return uwb_rc_addr_get(rc, addr, UWB_ADDR_DEV);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_dev_addr_get);
+
+
+/** Set @rc's address to @addr */
+int uwb_rc_mac_addr_set(struct uwb_rc *rc,
+			const struct uwb_mac_addr *addr)
+{
+	int result = -EINVAL;
+	mutex_lock(&rc->uwb_dev.mutex);
+	result = uwb_rc_addr_set(rc, addr, UWB_ADDR_MAC);
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+
+/** Set @rc's address to @addr */
+int uwb_rc_dev_addr_set(struct uwb_rc *rc,
+			const struct uwb_dev_addr *addr)
+{
+	int result = -EINVAL;
+	mutex_lock(&rc->uwb_dev.mutex);
+	result = uwb_rc_addr_set(rc, addr, UWB_ADDR_DEV);
+	rc->uwb_dev.dev_addr = *addr;
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+/* Returns !0 if given address is already assigned to device. */
+int __uwb_mac_addr_assigned_check(struct device *dev, void *_addr)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_mac_addr *addr = _addr;
+
+	if (!uwb_mac_addr_cmp(addr, &uwb_dev->mac_addr))
+		return !0;
+	return 0;
+}
+
+/* Returns !0 if given address is already assigned to device. */
+int __uwb_dev_addr_assigned_check(struct device *dev, void *_addr)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_dev_addr *addr = _addr;
+	if (!uwb_dev_addr_cmp(addr, &uwb_dev->dev_addr))
+		return !0;
+	return 0;
+}
+
+/**
+ * uwb_dev_addr_assign - assigned a generated DevAddr to a radio controller
+ * @rc:      the (local) radio controller device requiring a new DevAddr
+ *
+ * A new DevAddr is required when:
+ *    - first setting up a radio controller
+ *    - if the hardware reports a DevAddr conflict
+ *
+ * The DevAddr is randomly generated in the generated DevAddr range
+ * [0x100, 0xfeff]. The number of devices in a beacon group is limited
+ * by mMaxBPLength (96) so this address space will never be exhausted.
+ *
+ * [ECMA-368] 17.1.1, 17.16.
+ */
+int uwb_rc_dev_addr_assign(struct uwb_rc *rc)
+{
+	struct uwb_dev_addr new_addr;
+
+	do {
+		get_random_bytes(new_addr.data, sizeof(new_addr.data));
+	} while (new_addr.data[0] == 0x00 || new_addr.data[0] == 0xff
+		 || __uwb_dev_addr_assigned(rc, &new_addr));
+
+	return uwb_rc_dev_addr_set(rc, &new_addr);
+}
+
+/**
+ * uwbd_evt_handle_rc_dev_addr_conflict - handle a DEV_ADDR_CONFLICT event
+ * @evt: the DEV_ADDR_CONFLICT notification from the radio controller
+ *
+ * A new (non-conflicting) DevAddr is assigned to the radio controller.
+ *
+ * [ECMA-368] 17.1.1.1.
+ */
+int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt)
+{
+	struct uwb_rc *rc = evt->rc;
+
+	return uwb_rc_dev_addr_assign(rc);
+}
+
+/*
+ * Print the 48-bit EUI MAC address of the radio controller when
+ * reading /sys/class/uwb_rc/XX/mac_address
+ */
+static ssize_t uwb_rc_mac_addr_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	struct uwb_mac_addr addr;
+	ssize_t result;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	result = uwb_rc_addr_get(rc, &addr, UWB_ADDR_MAC);
+	mutex_unlock(&rc->uwb_dev.mutex);
+	if (result >= 0) {
+		result = uwb_mac_addr_print(buf, UWB_ADDR_STRSIZE, &addr);
+		buf[result++] = '\n';
+	}
+	return result;
+}
+
+/*
+ * Parse a 48 bit address written to /sys/class/uwb_rc/XX/mac_address
+ * and if correct, set it.
+ */
+static ssize_t uwb_rc_mac_addr_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	struct uwb_mac_addr addr;
+	ssize_t result;
+
+	if (!mac_pton(buf, addr.data))
+		return -EINVAL;
+	if (is_multicast_ether_addr(addr.data)) {
+		dev_err(&rc->uwb_dev.dev, "refusing to set multicast "
+			"MAC address %s\n", buf);
+		return -EINVAL;
+	}
+	result = uwb_rc_mac_addr_set(rc, &addr);
+	if (result == 0)
+		rc->uwb_dev.mac_addr = addr;
+
+	return result < 0 ? result : size;
+}
+DEVICE_ATTR(mac_address, S_IRUGO | S_IWUSR, uwb_rc_mac_addr_show, uwb_rc_mac_addr_store);
+
+/** Print @addr to @buf, @return bytes written */
+size_t __uwb_addr_print(char *buf, size_t buf_size, const unsigned char *addr,
+			int type)
+{
+	size_t result;
+	if (type)
+		result = scnprintf(buf, buf_size, "%pM", addr);
+	else
+		result = scnprintf(buf, buf_size, "%02x:%02x",
+				  addr[1], addr[0]);
+	return result;
+}
+EXPORT_SYMBOL_GPL(__uwb_addr_print);
diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c
new file mode 100644
index 000000000..6e3e713f0
--- /dev/null
+++ b/drivers/uwb/allocator.c
@@ -0,0 +1,385 @@
+/*
+ * UWB reservation management.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/uwb.h>
+
+#include "uwb-internal.h"
+
+static void uwb_rsv_fill_column_alloc(struct uwb_rsv_alloc_info *ai)
+{
+	int col, mas, safe_mas, unsafe_mas;
+	unsigned char *bm = ai->bm;
+	struct uwb_rsv_col_info *ci = ai->ci;
+	unsigned char c;
+
+	for (col = ci->csi.start_col; col < UWB_NUM_ZONES; col += ci->csi.interval) {
+    
+		safe_mas   = ci->csi.safe_mas_per_col;
+		unsafe_mas = ci->csi.unsafe_mas_per_col;
+    
+		for (mas = 0; mas < UWB_MAS_PER_ZONE; mas++ ) {
+			if (bm[col * UWB_MAS_PER_ZONE + mas] == 0) {
+	
+				if (safe_mas > 0) {
+					safe_mas--;
+					c = UWB_RSV_MAS_SAFE;
+				} else if (unsafe_mas > 0) {
+					unsafe_mas--;
+					c = UWB_RSV_MAS_UNSAFE;
+				} else {
+					break;
+				}
+				bm[col * UWB_MAS_PER_ZONE + mas] = c;
+			}
+		}
+	}
+}
+
+static void uwb_rsv_fill_row_alloc(struct uwb_rsv_alloc_info *ai)
+{
+	int mas, col, rows;
+	unsigned char *bm = ai->bm;
+	struct uwb_rsv_row_info *ri = &ai->ri;
+	unsigned char c;
+
+	rows = 1;
+	c = UWB_RSV_MAS_SAFE;
+	for (mas = UWB_MAS_PER_ZONE - 1; mas >= 0; mas--) {
+		if (ri->avail[mas] == 1) {
+      
+			if (rows > ri->used_rows) {
+				break;
+			} else if (rows > 7) {
+				c = UWB_RSV_MAS_UNSAFE;
+			}
+
+			for (col = 0; col < UWB_NUM_ZONES; col++) {
+				if (bm[col * UWB_NUM_ZONES + mas] != UWB_RSV_MAS_NOT_AVAIL) {
+					bm[col * UWB_NUM_ZONES + mas] = c;
+					if(c == UWB_RSV_MAS_SAFE)
+						ai->safe_allocated_mases++;
+					else
+						ai->unsafe_allocated_mases++;
+				}
+			}
+			rows++;
+		}
+	}
+	ai->total_allocated_mases = ai->safe_allocated_mases + ai->unsafe_allocated_mases;
+}
+
+/*
+ * Find the best column set for a given availability, interval, num safe mas and
+ * num unsafe mas.
+ *
+ * The different sets are tried in order as shown below, depending on the interval.
+ *
+ * interval = 16
+ *	deep = 0
+ *		set 1 ->  {  8 }
+ *	deep = 1
+ *		set 1 ->  {  4 }
+ *		set 2 ->  { 12 }
+ *	deep = 2
+ *		set 1 ->  {  2 }
+ *		set 2 ->  {  6 }
+ *		set 3 ->  { 10 }
+ *		set 4 ->  { 14 }
+ *	deep = 3
+ *		set 1 ->  {  1 }
+ *		set 2 ->  {  3 }
+ *		set 3 ->  {  5 }
+ *		set 4 ->  {  7 }
+ *		set 5 ->  {  9 }
+ *		set 6 ->  { 11 }
+ *		set 7 ->  { 13 }
+ *		set 8 ->  { 15 }
+ *
+ * interval = 8
+ *	deep = 0
+ *		set 1 ->  {  4  12 }
+ *	deep = 1
+ *		set 1 ->  {  2  10 }
+ *		set 2 ->  {  6  14 }
+ *	deep = 2
+ *		set 1 ->  {  1   9 }
+ *		set 2 ->  {  3  11 }
+ *		set 3 ->  {  5  13 }
+ *		set 4 ->  {  7  15 }
+ *
+ * interval = 4
+ *	deep = 0
+ *		set 1 ->  {  2   6  10  14 }
+ *	deep = 1
+ *		set 1 ->  {  1   5   9  13 }
+ *		set 2 ->  {  3   7  11  15 }
+ *
+ * interval = 2
+ *	deep = 0
+ *		set 1 ->  {  1   3   5   7   9  11  13  15 }
+ */
+static int uwb_rsv_find_best_column_set(struct uwb_rsv_alloc_info *ai, int interval, 
+					int num_safe_mas, int num_unsafe_mas)
+{
+	struct uwb_rsv_col_info *ci = ai->ci;
+	struct uwb_rsv_col_set_info *csi = &ci->csi;
+	struct uwb_rsv_col_set_info tmp_csi;
+	int deep, set, col, start_col_deep, col_start_set;
+	int start_col, max_mas_in_set, lowest_max_mas_in_deep;
+	int n_mas;
+	int found = UWB_RSV_ALLOC_NOT_FOUND; 
+
+	tmp_csi.start_col = 0;
+	start_col_deep = interval;
+	n_mas = num_unsafe_mas + num_safe_mas;
+
+	for (deep = 0; ((interval >> deep) & 0x1) == 0; deep++) {
+		start_col_deep /= 2;
+		col_start_set = 0;
+		lowest_max_mas_in_deep = UWB_MAS_PER_ZONE;
+
+		for (set = 1; set <= (1 << deep); set++) {
+			max_mas_in_set = 0;
+			start_col = start_col_deep + col_start_set;
+			for (col = start_col; col < UWB_NUM_ZONES; col += interval) {
+                
+				if (ci[col].max_avail_safe >= num_safe_mas &&
+				    ci[col].max_avail_unsafe >= n_mas) {
+					if (ci[col].highest_mas[n_mas] > max_mas_in_set)
+						max_mas_in_set = ci[col].highest_mas[n_mas];
+				} else {
+					max_mas_in_set = 0;
+					break;
+				}
+			}
+			if ((lowest_max_mas_in_deep > max_mas_in_set) && max_mas_in_set) {
+				lowest_max_mas_in_deep = max_mas_in_set;
+
+				tmp_csi.start_col = start_col;
+			}
+			col_start_set += (interval >> deep);
+		}
+
+		if (lowest_max_mas_in_deep < 8) {
+			csi->start_col = tmp_csi.start_col;
+			found = UWB_RSV_ALLOC_FOUND;
+			break;
+		} else if ((lowest_max_mas_in_deep > 8) && 
+			   (lowest_max_mas_in_deep != UWB_MAS_PER_ZONE) &&
+			   (found == UWB_RSV_ALLOC_NOT_FOUND)) {
+			csi->start_col = tmp_csi.start_col;
+			found = UWB_RSV_ALLOC_FOUND;
+		}
+	}
+
+	if (found == UWB_RSV_ALLOC_FOUND) {
+		csi->interval = interval;
+		csi->safe_mas_per_col = num_safe_mas;
+		csi->unsafe_mas_per_col = num_unsafe_mas;
+
+		ai->safe_allocated_mases = (UWB_NUM_ZONES / interval) * num_safe_mas;
+		ai->unsafe_allocated_mases = (UWB_NUM_ZONES / interval) * num_unsafe_mas;
+		ai->total_allocated_mases = ai->safe_allocated_mases + ai->unsafe_allocated_mases;
+		ai->interval = interval;		
+	}
+	return found;
+}
+
+static void get_row_descriptors(struct uwb_rsv_alloc_info *ai)
+{
+	unsigned char *bm = ai->bm;
+	struct uwb_rsv_row_info *ri = &ai->ri;
+	int col, mas;
+  
+	ri->free_rows = 16;
+	for (mas = 0; mas < UWB_MAS_PER_ZONE; mas ++) {
+		ri->avail[mas] = 1;
+		for (col = 1; col < UWB_NUM_ZONES; col++) {
+			if (bm[col * UWB_NUM_ZONES + mas] == UWB_RSV_MAS_NOT_AVAIL) {
+				ri->free_rows--;
+				ri->avail[mas]=0;
+				break;
+			}
+		}
+	}
+}
+
+static void uwb_rsv_fill_column_info(unsigned char *bm, int column, struct uwb_rsv_col_info *rci)
+{
+	int mas;
+	int block_count = 0, start_block = 0; 
+	int previous_avail = 0;
+	int available = 0;
+	int safe_mas_in_row[UWB_MAS_PER_ZONE] = {
+		8, 7, 6, 5, 4, 4, 4, 4, 4, 4, 4, 4, 4, 3, 2, 1,
+	};
+
+	rci->max_avail_safe = 0;
+
+	for (mas = 0; mas < UWB_MAS_PER_ZONE; mas ++) {
+		if (!bm[column * UWB_NUM_ZONES + mas]) {
+			available++;
+			rci->max_avail_unsafe = available;
+
+			rci->highest_mas[available] = mas;
+
+			if (previous_avail) {
+				block_count++;
+				if ((block_count > safe_mas_in_row[start_block]) &&
+				    (!rci->max_avail_safe))
+					rci->max_avail_safe = available - 1;
+			} else {
+				previous_avail = 1;
+				start_block = mas;
+				block_count = 1;
+			}
+		} else {
+			previous_avail = 0;
+		}
+	}
+	if (!rci->max_avail_safe)
+		rci->max_avail_safe = rci->max_avail_unsafe;
+}
+
+static void get_column_descriptors(struct uwb_rsv_alloc_info *ai)
+{
+	unsigned char *bm = ai->bm;
+	struct uwb_rsv_col_info *ci = ai->ci;
+	int col;
+
+	for (col = 1; col < UWB_NUM_ZONES; col++) {
+		uwb_rsv_fill_column_info(bm, col, &ci[col]);
+	}
+}
+
+static int uwb_rsv_find_best_row_alloc(struct uwb_rsv_alloc_info *ai)
+{
+	int n_rows;
+	int max_rows = ai->max_mas / UWB_USABLE_MAS_PER_ROW;
+	int min_rows = ai->min_mas / UWB_USABLE_MAS_PER_ROW;
+	if (ai->min_mas % UWB_USABLE_MAS_PER_ROW)
+		min_rows++;
+	for (n_rows = max_rows; n_rows >= min_rows; n_rows--) {
+		if (n_rows <= ai->ri.free_rows) {
+			ai->ri.used_rows = n_rows;
+			ai->interval = 1; /* row reservation */
+			uwb_rsv_fill_row_alloc(ai);
+			return UWB_RSV_ALLOC_FOUND;
+		}
+	}  
+	return UWB_RSV_ALLOC_NOT_FOUND;
+}
+
+static int uwb_rsv_find_best_col_alloc(struct uwb_rsv_alloc_info *ai, int interval)
+{
+	int n_safe, n_unsafe, n_mas;  
+	int n_column = UWB_NUM_ZONES / interval;
+	int max_per_zone = ai->max_mas / n_column;
+	int min_per_zone = ai->min_mas / n_column;
+
+	if (ai->min_mas % n_column)
+		min_per_zone++;
+
+	if (min_per_zone > UWB_MAS_PER_ZONE) {
+		return UWB_RSV_ALLOC_NOT_FOUND;
+	}
+    
+	if (max_per_zone > UWB_MAS_PER_ZONE) {
+		max_per_zone = UWB_MAS_PER_ZONE;
+	}
+    
+	for (n_mas = max_per_zone; n_mas >= min_per_zone; n_mas--) {
+		if (uwb_rsv_find_best_column_set(ai, interval, 0, n_mas) == UWB_RSV_ALLOC_NOT_FOUND)
+			continue;
+		for (n_safe = n_mas; n_safe >= 0; n_safe--) {
+			n_unsafe = n_mas - n_safe;
+			if (uwb_rsv_find_best_column_set(ai, interval, n_safe, n_unsafe) == UWB_RSV_ALLOC_FOUND) {
+				uwb_rsv_fill_column_alloc(ai);
+				return UWB_RSV_ALLOC_FOUND;
+			}
+		}
+	}
+	return UWB_RSV_ALLOC_NOT_FOUND;
+}
+
+int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv, struct uwb_mas_bm *available, 
+				 struct uwb_mas_bm *result)
+{
+	struct uwb_rsv_alloc_info *ai;
+	int interval;
+	int bit_index;
+
+	ai = kzalloc(sizeof(struct uwb_rsv_alloc_info), GFP_KERNEL);
+	if (!ai)
+		return UWB_RSV_ALLOC_NOT_FOUND;
+	ai->min_mas = rsv->min_mas;
+	ai->max_mas = rsv->max_mas;
+	ai->max_interval = rsv->max_interval;
+
+
+	/* fill the not available vector from the available bm */
+	for_each_clear_bit(bit_index, available->bm, UWB_NUM_MAS)
+		ai->bm[bit_index] = UWB_RSV_MAS_NOT_AVAIL;
+
+	if (ai->max_interval == 1) {
+		get_row_descriptors(ai);
+		if (uwb_rsv_find_best_row_alloc(ai) == UWB_RSV_ALLOC_FOUND)
+			goto alloc_found;
+		else
+			goto alloc_not_found;
+	}
+
+	get_column_descriptors(ai);
+        
+	for (interval = 16; interval >= 2; interval>>=1) {
+		if (interval > ai->max_interval)
+			continue;
+		if (uwb_rsv_find_best_col_alloc(ai, interval) == UWB_RSV_ALLOC_FOUND)
+			goto alloc_found;
+	}
+
+	/* try row reservation if no column is found */
+	get_row_descriptors(ai);
+	if (uwb_rsv_find_best_row_alloc(ai) == UWB_RSV_ALLOC_FOUND)
+		goto alloc_found;
+	else
+		goto alloc_not_found;
+
+  alloc_found:
+	bitmap_zero(result->bm, UWB_NUM_MAS);
+	bitmap_zero(result->unsafe_bm, UWB_NUM_MAS);
+	/* fill the safe and unsafe bitmaps */
+	for (bit_index = 0; bit_index < UWB_NUM_MAS; bit_index++) {
+		if (ai->bm[bit_index] == UWB_RSV_MAS_SAFE)
+			set_bit(bit_index, result->bm);
+		else if (ai->bm[bit_index] == UWB_RSV_MAS_UNSAFE)
+			set_bit(bit_index, result->unsafe_bm);
+	}
+	bitmap_or(result->bm, result->bm, result->unsafe_bm, UWB_NUM_MAS);
+
+	result->safe   = ai->safe_allocated_mases;
+	result->unsafe = ai->unsafe_allocated_mases;
+	
+	kfree(ai);		
+	return UWB_RSV_ALLOC_FOUND;
+  
+  alloc_not_found:
+	kfree(ai);
+	return UWB_RSV_ALLOC_NOT_FOUND;
+}
diff --git a/drivers/uwb/beacon.c b/drivers/uwb/beacon.c
new file mode 100644
index 000000000..f40745fcb
--- /dev/null
+++ b/drivers/uwb/beacon.c
@@ -0,0 +1,609 @@
+/*
+ * Ultra Wide Band
+ * Beacon management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/slab.h>
+
+#include "uwb-internal.h"
+
+/* Start Beaconing command structure */
+struct uwb_rc_cmd_start_beacon {
+	struct uwb_rccb rccb;
+	__le16 wBPSTOffset;
+	u8 bChannelNumber;
+} __attribute__((packed));
+
+
+static int uwb_rc_start_beacon(struct uwb_rc *rc, u16 bpst_offset, u8 channel)
+{
+	int result;
+	struct uwb_rc_cmd_start_beacon *cmd;
+	struct uwb_rc_evt_confirm reply;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+	cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+	cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_START_BEACON);
+	cmd->wBPSTOffset = cpu_to_le16(bpst_offset);
+	cmd->bChannelNumber = channel;
+	reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply.rceb.wEvent = UWB_RC_CMD_START_BEACON;
+	result = uwb_rc_cmd(rc, "START-BEACON", &cmd->rccb, sizeof(*cmd),
+			    &reply.rceb, sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(&rc->uwb_dev.dev,
+			"START-BEACON: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+		result = -EIO;
+	}
+error_cmd:
+	kfree(cmd);
+	return result;
+}
+
+static int uwb_rc_stop_beacon(struct uwb_rc *rc)
+{
+	int result;
+	struct uwb_rccb *cmd;
+	struct uwb_rc_evt_confirm reply;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+	cmd->bCommandType = UWB_RC_CET_GENERAL;
+	cmd->wCommand = cpu_to_le16(UWB_RC_CMD_STOP_BEACON);
+	reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply.rceb.wEvent = UWB_RC_CMD_STOP_BEACON;
+	result = uwb_rc_cmd(rc, "STOP-BEACON", cmd, sizeof(*cmd),
+			    &reply.rceb, sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(&rc->uwb_dev.dev,
+			"STOP-BEACON: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+		result = -EIO;
+	}
+error_cmd:
+	kfree(cmd);
+	return result;
+}
+
+/*
+ * Start/stop beacons
+ *
+ * @rc:          UWB Radio Controller to operate on
+ * @channel:     UWB channel on which to beacon (WUSB[table
+ *               5-12]). If -1, stop beaconing.
+ * @bpst_offset: Beacon Period Start Time offset; FIXME-do zero
+ *
+ * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB
+ * of a SET IE command after the device sent the first beacon that includes
+ * the IEs specified in the SET IE command. So, after we start beaconing we
+ * check if there is anything in the IE cache and call the SET IE command
+ * if needed.
+ */
+int uwb_rc_beacon(struct uwb_rc *rc, int channel, unsigned bpst_offset)
+{
+	int result;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	dev_dbg(dev, "%s: channel = %d\n", __func__, channel);
+	if (channel < 0)
+		channel = -1;
+	if (channel == -1)
+		result = uwb_rc_stop_beacon(rc);
+	else {
+		/* channel >= 0...dah */
+		result = uwb_rc_start_beacon(rc, bpst_offset, channel);
+		if (result < 0) {
+			dev_err(dev, "Cannot start beaconing: %d\n", result);
+			return result;
+		}
+		if (le16_to_cpu(rc->ies->wIELength) > 0) {
+			result = uwb_rc_set_ie(rc, rc->ies);
+			if (result < 0) {
+				dev_err(dev, "Cannot set new IE on device: "
+					"%d\n", result);
+				result = uwb_rc_stop_beacon(rc);
+				channel = -1;
+				bpst_offset = 0;
+			}
+		}
+	}
+
+	if (result >= 0)
+		rc->beaconing = channel;
+	return result;
+}
+
+/*
+ * Beacon cache
+ *
+ * The purpose of this is to speed up the lookup of becon information
+ * when a new beacon arrives. The UWB Daemon uses it also to keep a
+ * tab of which devices are in radio distance and which not. When a
+ * device's beacon stays present for more than a certain amount of
+ * time, it is considered a new, usable device. When a beacon ceases
+ * to be received for a certain amount of time, it is considered that
+ * the device is gone.
+ *
+ * FIXME: use an allocator for the entries
+ * FIXME: use something faster for search than a list
+ */
+
+void uwb_bce_kfree(struct kref *_bce)
+{
+	struct uwb_beca_e *bce = container_of(_bce, struct uwb_beca_e, refcnt);
+
+	kfree(bce->be);
+	kfree(bce);
+}
+
+
+/* Find a beacon by dev addr in the cache */
+static
+struct uwb_beca_e *__uwb_beca_find_bydev(struct uwb_rc *rc,
+					 const struct uwb_dev_addr *dev_addr)
+{
+	struct uwb_beca_e *bce, *next;
+	list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
+		if (!memcmp(&bce->dev_addr, dev_addr, sizeof(bce->dev_addr)))
+			goto out;
+	}
+	bce = NULL;
+out:
+	return bce;
+}
+
+/* Find a beacon by dev addr in the cache */
+static
+struct uwb_beca_e *__uwb_beca_find_bymac(struct uwb_rc *rc,
+					 const struct uwb_mac_addr *mac_addr)
+{
+	struct uwb_beca_e *bce, *next;
+	list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
+		if (!memcmp(bce->mac_addr, mac_addr->data,
+			    sizeof(struct uwb_mac_addr)))
+			goto out;
+	}
+	bce = NULL;
+out:
+	return bce;
+}
+
+/**
+ * uwb_dev_get_by_devaddr - get a UWB device with a specific DevAddr
+ * @rc:      the radio controller that saw the device
+ * @devaddr: DevAddr of the UWB device to find
+ *
+ * There may be more than one matching device (in the case of a
+ * DevAddr conflict), but only the first one is returned.
+ */
+struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
+				       const struct uwb_dev_addr *devaddr)
+{
+	struct uwb_dev *found = NULL;
+	struct uwb_beca_e *bce;
+
+	mutex_lock(&rc->uwb_beca.mutex);
+	bce = __uwb_beca_find_bydev(rc, devaddr);
+	if (bce)
+		found = uwb_dev_try_get(rc, bce->uwb_dev);
+	mutex_unlock(&rc->uwb_beca.mutex);
+
+	return found;
+}
+
+/**
+ * uwb_dev_get_by_macaddr - get a UWB device with a specific EUI-48
+ * @rc:      the radio controller that saw the device
+ * @devaddr: EUI-48 of the UWB device to find
+ */
+struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc,
+				       const struct uwb_mac_addr *macaddr)
+{
+	struct uwb_dev *found = NULL;
+	struct uwb_beca_e *bce;
+
+	mutex_lock(&rc->uwb_beca.mutex);
+	bce = __uwb_beca_find_bymac(rc, macaddr);
+	if (bce)
+		found = uwb_dev_try_get(rc, bce->uwb_dev);
+	mutex_unlock(&rc->uwb_beca.mutex);
+
+	return found;
+}
+
+/* Initialize a beacon cache entry */
+static void uwb_beca_e_init(struct uwb_beca_e *bce)
+{
+	mutex_init(&bce->mutex);
+	kref_init(&bce->refcnt);
+	stats_init(&bce->lqe_stats);
+	stats_init(&bce->rssi_stats);
+}
+
+/*
+ * Add a beacon to the cache
+ *
+ * @be:         Beacon event information
+ * @bf:         Beacon frame (part of b, really)
+ * @ts_jiffies: Timestamp (in jiffies) when the beacon was received
+ */
+static
+struct uwb_beca_e *__uwb_beca_add(struct uwb_rc *rc,
+				  struct uwb_rc_evt_beacon *be,
+				  struct uwb_beacon_frame *bf,
+				  unsigned long ts_jiffies)
+{
+	struct uwb_beca_e *bce;
+
+	bce = kzalloc(sizeof(*bce), GFP_KERNEL);
+	if (bce == NULL)
+		return NULL;
+	uwb_beca_e_init(bce);
+	bce->ts_jiffies = ts_jiffies;
+	bce->uwb_dev = NULL;
+	list_add(&bce->node, &rc->uwb_beca.list);
+	return bce;
+}
+
+/*
+ * Wipe out beacon entries that became stale
+ *
+ * Remove associated devicest too.
+ */
+void uwb_beca_purge(struct uwb_rc *rc)
+{
+	struct uwb_beca_e *bce, *next;
+	unsigned long expires;
+
+	mutex_lock(&rc->uwb_beca.mutex);
+	list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
+		expires = bce->ts_jiffies + msecs_to_jiffies(beacon_timeout_ms);
+		if (time_after(jiffies, expires)) {
+			uwbd_dev_offair(bce);
+		}
+	}
+	mutex_unlock(&rc->uwb_beca.mutex);
+}
+
+/* Clean up the whole beacon cache. Called on shutdown */
+void uwb_beca_release(struct uwb_rc *rc)
+{
+	struct uwb_beca_e *bce, *next;
+
+	mutex_lock(&rc->uwb_beca.mutex);
+	list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
+		list_del(&bce->node);
+		uwb_bce_put(bce);
+	}
+	mutex_unlock(&rc->uwb_beca.mutex);
+}
+
+static void uwb_beacon_print(struct uwb_rc *rc, struct uwb_rc_evt_beacon *be,
+			     struct uwb_beacon_frame *bf)
+{
+	char macbuf[UWB_ADDR_STRSIZE];
+	char devbuf[UWB_ADDR_STRSIZE];
+	char dstbuf[UWB_ADDR_STRSIZE];
+
+	uwb_mac_addr_print(macbuf, sizeof(macbuf), &bf->Device_Identifier);
+	uwb_dev_addr_print(devbuf, sizeof(devbuf), &bf->hdr.SrcAddr);
+	uwb_dev_addr_print(dstbuf, sizeof(dstbuf), &bf->hdr.DestAddr);
+	dev_info(&rc->uwb_dev.dev,
+		 "BEACON from %s to %s (ch%u offset %u slot %u MAC %s)\n",
+		 devbuf, dstbuf, be->bChannelNumber, be->wBPSTOffset,
+		 bf->Beacon_Slot_Number, macbuf);
+}
+
+/*
+ * @bce: beacon cache entry, referenced
+ */
+ssize_t uwb_bce_print_IEs(struct uwb_dev *uwb_dev, struct uwb_beca_e *bce,
+			  char *buf, size_t size)
+{
+	ssize_t result = 0;
+	struct uwb_rc_evt_beacon *be;
+	struct uwb_beacon_frame *bf;
+	int ies_len;
+	struct uwb_ie_hdr *ies;
+
+	mutex_lock(&bce->mutex);
+
+	be = bce->be;
+	if (be) {
+		bf = (struct uwb_beacon_frame *)bce->be->BeaconInfo;
+		ies_len = be->wBeaconInfoLength - sizeof(struct uwb_beacon_frame);
+		ies = (struct uwb_ie_hdr *)bf->IEData;
+
+		result = uwb_ie_dump_hex(ies, ies_len, buf, size);
+	}
+
+	mutex_unlock(&bce->mutex);
+
+	return result;
+}
+
+/*
+ * Verify that the beacon event, frame and IEs are ok
+ */
+static int uwb_verify_beacon(struct uwb_rc *rc, struct uwb_event *evt,
+			     struct uwb_rc_evt_beacon *be)
+{
+	int result = -EINVAL;
+	struct uwb_beacon_frame *bf;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	/* Is there enough data to decode a beacon frame? */
+	if (evt->notif.size < sizeof(*be) + sizeof(*bf)) {
+		dev_err(dev, "BEACON event: Not enough data to decode "
+			"(%zu vs %zu bytes needed)\n", evt->notif.size,
+			sizeof(*be) + sizeof(*bf));
+		goto error;
+	}
+	/* FIXME: make sure beacon frame IEs are fine and that the whole thing
+	 * is consistent */
+	result = 0;
+error:
+	return result;
+}
+
+/*
+ * Handle UWB_RC_EVT_BEACON events
+ *
+ * We check the beacon cache to see how the received beacon fares. If
+ * is there already we refresh the timestamp. If not we create a new
+ * entry.
+ *
+ * According to the WHCI and WUSB specs, only one beacon frame is
+ * allowed per notification block, so we don't bother about scanning
+ * for more.
+ */
+int uwbd_evt_handle_rc_beacon(struct uwb_event *evt)
+{
+	int result = -EINVAL;
+	struct uwb_rc *rc;
+	struct uwb_rc_evt_beacon *be;
+	struct uwb_beacon_frame *bf;
+	struct uwb_beca_e *bce;
+
+	rc = evt->rc;
+	be = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon, rceb);
+	result = uwb_verify_beacon(rc, evt, be);
+	if (result < 0)
+		return result;
+
+	/* FIXME: handle alien beacons. */
+	if (be->bBeaconType == UWB_RC_BEACON_TYPE_OL_ALIEN ||
+	    be->bBeaconType == UWB_RC_BEACON_TYPE_NOL_ALIEN) {
+		return -ENOSYS;
+	}
+
+	bf = (struct uwb_beacon_frame *) be->BeaconInfo;
+
+	/*
+	 * Drop beacons from devices with a NULL EUI-48 -- they cannot
+	 * be uniquely identified.
+	 *
+	 * It's expected that these will all be WUSB devices and they
+	 * have a WUSB specific connection method so ignoring them
+	 * here shouldn't be a problem.
+	 */
+	if (uwb_mac_addr_bcast(&bf->Device_Identifier))
+		return 0;
+
+	mutex_lock(&rc->uwb_beca.mutex);
+	bce = __uwb_beca_find_bymac(rc, &bf->Device_Identifier);
+	if (bce == NULL) {
+		/* Not in there, a new device is pinging */
+		uwb_beacon_print(evt->rc, be, bf);
+		bce = __uwb_beca_add(rc, be, bf, evt->ts_jiffies);
+		if (bce == NULL) {
+			mutex_unlock(&rc->uwb_beca.mutex);
+			return -ENOMEM;
+		}
+	}
+	mutex_unlock(&rc->uwb_beca.mutex);
+
+	mutex_lock(&bce->mutex);
+	/* purge old beacon data */
+	kfree(bce->be);
+
+	/* Update commonly used fields */
+	bce->ts_jiffies = evt->ts_jiffies;
+	bce->be = be;
+	bce->dev_addr = bf->hdr.SrcAddr;
+	bce->mac_addr = &bf->Device_Identifier;
+	be->wBPSTOffset = le16_to_cpu(be->wBPSTOffset);
+	be->wBeaconInfoLength = le16_to_cpu(be->wBeaconInfoLength);
+	stats_add_sample(&bce->lqe_stats, be->bLQI - 7);
+	stats_add_sample(&bce->rssi_stats, be->bRSSI + 18);
+
+	/*
+	 * This might be a beacon from a new device.
+	 */
+	if (bce->uwb_dev == NULL)
+		uwbd_dev_onair(evt->rc, bce);
+
+	mutex_unlock(&bce->mutex);
+
+	return 1; /* we keep the event data */
+}
+
+/*
+ * Handle UWB_RC_EVT_BEACON_SIZE events
+ *
+ * XXXXX
+ */
+int uwbd_evt_handle_rc_beacon_size(struct uwb_event *evt)
+{
+	int result = -EINVAL;
+	struct device *dev = &evt->rc->uwb_dev.dev;
+	struct uwb_rc_evt_beacon_size *bs;
+
+	/* Is there enough data to decode the event? */
+	if (evt->notif.size < sizeof(*bs)) {
+		dev_err(dev, "BEACON SIZE notification: Not enough data to "
+			"decode (%zu vs %zu bytes needed)\n",
+			evt->notif.size, sizeof(*bs));
+		goto error;
+	}
+	bs = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon_size, rceb);
+	if (0)
+		dev_info(dev, "Beacon size changed to %u bytes "
+			"(FIXME: action?)\n", le16_to_cpu(bs->wNewBeaconSize));
+	else {
+		/* temporary hack until we do something with this message... */
+		static unsigned count;
+		if (++count % 1000 == 0)
+			dev_info(dev, "Beacon size changed %u times "
+				"(FIXME: action?)\n", count);
+	}
+	result = 0;
+error:
+	return result;
+}
+
+/**
+ * uwbd_evt_handle_rc_bp_slot_change - handle a BP_SLOT_CHANGE event
+ * @evt: the BP_SLOT_CHANGE notification from the radio controller
+ *
+ * If the event indicates that no beacon period slots were available
+ * then radio controller has transitioned to a non-beaconing state.
+ * Otherwise, simply save the current beacon slot.
+ */
+int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *evt)
+{
+	struct uwb_rc *rc = evt->rc;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_evt_bp_slot_change *bpsc;
+
+	if (evt->notif.size < sizeof(*bpsc)) {
+		dev_err(dev, "BP SLOT CHANGE event: Not enough data\n");
+		return -EINVAL;
+	}
+	bpsc = container_of(evt->notif.rceb, struct uwb_rc_evt_bp_slot_change, rceb);
+
+	if (uwb_rc_evt_bp_slot_change_no_slot(bpsc)) {
+		dev_err(dev, "stopped beaconing: No free slots in BP\n");
+		mutex_lock(&rc->uwb_dev.mutex);
+		rc->beaconing = -1;
+		mutex_unlock(&rc->uwb_dev.mutex);
+	} else
+		rc->uwb_dev.beacon_slot = uwb_rc_evt_bp_slot_change_slot_num(bpsc);
+
+	return 0;
+}
+
+/**
+ * Handle UWB_RC_EVT_BPOIE_CHANGE events
+ *
+ * XXXXX
+ */
+struct uwb_ie_bpo {
+	struct uwb_ie_hdr hdr;
+	u8                bp_length;
+	u8                data[];
+} __attribute__((packed));
+
+int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *evt)
+{
+	int result = -EINVAL;
+	struct device *dev = &evt->rc->uwb_dev.dev;
+	struct uwb_rc_evt_bpoie_change *bpoiec;
+	struct uwb_ie_bpo *bpoie;
+	static unsigned count;	/* FIXME: this is a temp hack */
+	size_t iesize;
+
+	/* Is there enough data to decode it? */
+	if (evt->notif.size < sizeof(*bpoiec)) {
+		dev_err(dev, "BPOIEC notification: Not enough data to "
+			"decode (%zu vs %zu bytes needed)\n",
+			evt->notif.size, sizeof(*bpoiec));
+		goto error;
+	}
+	bpoiec = container_of(evt->notif.rceb, struct uwb_rc_evt_bpoie_change, rceb);
+	iesize = le16_to_cpu(bpoiec->wBPOIELength);
+	if (iesize < sizeof(*bpoie)) {
+		dev_err(dev, "BPOIEC notification: Not enough IE data to "
+			"decode (%zu vs %zu bytes needed)\n",
+			iesize, sizeof(*bpoie));
+		goto error;
+	}
+	if (++count % 1000 == 0)	/* Lame placeholder */
+		dev_info(dev, "BPOIE: %u changes received\n", count);
+	/*
+	 * FIXME: At this point we should go over all the IEs in the
+	 *        bpoiec->BPOIE array and act on each.
+	 */
+	result = 0;
+error:
+	return result;
+}
+
+/*
+ * Print beaconing state.
+ */
+static ssize_t uwb_rc_beacon_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	ssize_t result;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	result = sprintf(buf, "%d\n", rc->beaconing);
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+/*
+ * Start beaconing on the specified channel, or stop beaconing.
+ */
+static ssize_t uwb_rc_beacon_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	int channel;
+	ssize_t result = -EINVAL;
+
+	result = sscanf(buf, "%d", &channel);
+	if (result >= 1)
+		result = uwb_radio_force_channel(rc, channel);
+
+	return result < 0 ? result : size;
+}
+DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, uwb_rc_beacon_show, uwb_rc_beacon_store);
diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c
new file mode 100644
index 000000000..ff2d4240b
--- /dev/null
+++ b/drivers/uwb/driver.c
@@ -0,0 +1,157 @@
+/*
+ * Ultra Wide Band
+ * Driver initialization, etc
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * Life cycle: FIXME: explain
+ *
+ *  UWB radio controller:
+ *
+ *    1. alloc a uwb_rc, zero it
+ *    2. call uwb_rc_init() on it to set it up + ops (won't do any
+ *       kind of allocation)
+ *    3. register (now it is owned by the UWB stack--deregister before
+ *       freeing/destroying).
+ *    4. It lives on it's own now (UWB stack handles)--when it
+ *       disconnects, call unregister()
+ *    5. free it.
+ *
+ *    Make sure you have a reference to the uwb_rc before calling
+ *    any of the UWB API functions.
+ *
+ * TODO:
+ *
+ * 1. Locking and life cycle management is crappy still. All entry
+ *    points to the UWB HCD API assume you have a reference on the
+ *    uwb_rc structure and that it won't go away. They mutex lock it
+ *    before doing anything.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/random.h>
+
+#include "uwb-internal.h"
+
+
+/* UWB stack attributes (or 'global' constants) */
+
+
+/**
+ * If a beacon disappears for longer than this, then we consider the
+ * device who was represented by that beacon to be gone.
+ *
+ * ECMA-368[17.2.3, last para] establishes that a device must not
+ * consider a device to be its neighbour if he doesn't receive a beacon
+ * for more than mMaxLostBeacons. mMaxLostBeacons is defined in
+ * ECMA-368[17.16] as 3; because we can get only one beacon per
+ * superframe, that'd be 3 * 65ms = 195 ~ 200 ms. Let's give it time
+ * for jitter and stuff and make it 500 ms.
+ */
+unsigned long beacon_timeout_ms = 500;
+
+static
+ssize_t beacon_timeout_ms_show(struct class *class,
+				struct class_attribute *attr,
+				char *buf)
+{
+	return scnprintf(buf, PAGE_SIZE, "%lu\n", beacon_timeout_ms);
+}
+
+static
+ssize_t beacon_timeout_ms_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf, size_t size)
+{
+	unsigned long bt;
+	ssize_t result;
+	result = sscanf(buf, "%lu", &bt);
+	if (result != 1)
+		return -EINVAL;
+	beacon_timeout_ms = bt;
+	return size;
+}
+static CLASS_ATTR_RW(beacon_timeout_ms);
+
+static struct attribute *uwb_class_attrs[] = {
+	&class_attr_beacon_timeout_ms.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(uwb_class);
+
+/** Device model classes */
+struct class uwb_rc_class = {
+	.name        = "uwb_rc",
+	.class_groups = uwb_class_groups,
+};
+
+
+static int __init uwb_subsys_init(void)
+{
+	int result = 0;
+
+	result = uwb_est_create();
+	if (result < 0) {
+		printk(KERN_ERR "uwb: Can't initialize EST subsystem\n");
+		goto error_est_init;
+	}
+
+	result = class_register(&uwb_rc_class);
+	if (result < 0)
+		goto error_uwb_rc_class_register;
+
+	/* Register the UWB bus */
+	result = bus_register(&uwb_bus_type);
+	if (result) {
+		pr_err("%s - registering bus driver failed\n", __func__);
+		goto exit_bus;
+	}
+
+	uwb_dbg_init();
+	return 0;
+
+exit_bus:
+	class_unregister(&uwb_rc_class);
+error_uwb_rc_class_register:
+	uwb_est_destroy();
+error_est_init:
+	return result;
+}
+module_init(uwb_subsys_init);
+
+static void __exit uwb_subsys_exit(void)
+{
+	uwb_dbg_exit();
+	bus_unregister(&uwb_bus_type);
+	class_unregister(&uwb_rc_class);
+	uwb_est_destroy();
+	return;
+}
+module_exit(uwb_subsys_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Ultra Wide Band core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/drp-avail.c b/drivers/uwb/drp-avail.c
new file mode 100644
index 000000000..40a540a5a
--- /dev/null
+++ b/drivers/uwb/drp-avail.c
@@ -0,0 +1,290 @@
+/*
+ * Ultra Wide Band
+ * DRP availability management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Reinette Chatre <reinette.chatre@intel.com>
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * Manage DRP Availability (the MAS available for DRP
+ * reservations). Thus:
+ *
+ * - Handle DRP Availability Change notifications
+ *
+ * - Allow the reservation manager to indicate MAS reserved/released
+ *   by local (owned by/targeted at the radio controller)
+ *   reservations.
+ *
+ * - Based on the two sources above, generate a DRP Availability IE to
+ *   be included in the beacon.
+ *
+ * See also the documentation for struct uwb_drp_avail.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/bitmap.h>
+#include "uwb-internal.h"
+
+/**
+ * uwb_drp_avail_init - initialize an RC's MAS availability
+ *
+ * All MAS are available initially.  The RC will inform use which
+ * slots are used for the BP (it may change in size).
+ */
+void uwb_drp_avail_init(struct uwb_rc *rc)
+{
+	bitmap_fill(rc->drp_avail.global, UWB_NUM_MAS);
+	bitmap_fill(rc->drp_avail.local, UWB_NUM_MAS);
+	bitmap_fill(rc->drp_avail.pending, UWB_NUM_MAS);
+}
+
+/*
+ * Determine MAS available for new local reservations.
+ *
+ * avail = global & local & pending
+ */
+void uwb_drp_available(struct uwb_rc *rc, struct uwb_mas_bm *avail)
+{
+	bitmap_and(avail->bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS);
+	bitmap_and(avail->bm, avail->bm, rc->drp_avail.pending, UWB_NUM_MAS);
+}
+
+/**
+ * uwb_drp_avail_reserve_pending - reserve MAS for a new reservation
+ * @rc: the radio controller
+ * @mas: the MAS to reserve
+ *
+ * Returns 0 on success, or -EBUSY if the MAS requested aren't available.
+ */
+int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas)
+{
+	struct uwb_mas_bm avail;
+
+	uwb_drp_available(rc, &avail);
+	if (!bitmap_subset(mas->bm, avail.bm, UWB_NUM_MAS))
+		return -EBUSY;
+
+	bitmap_andnot(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
+	return 0;
+}
+
+/**
+ * uwb_drp_avail_reserve - reserve MAS for an established reservation
+ * @rc: the radio controller
+ * @mas: the MAS to reserve
+ */
+void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas)
+{
+	bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
+	bitmap_andnot(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS);
+	rc->drp_avail.ie_valid = false;
+}
+
+/**
+ * uwb_drp_avail_release - release MAS from a pending or established reservation
+ * @rc: the radio controller
+ * @mas: the MAS to release
+ */
+void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas)
+{
+	bitmap_or(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS);
+	bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
+	rc->drp_avail.ie_valid = false;
+	uwb_rsv_handle_drp_avail_change(rc);
+}
+
+/**
+ * uwb_drp_avail_ie_update - update the DRP Availability IE
+ * @rc: the radio controller
+ *
+ * avail = global & local
+ */
+void uwb_drp_avail_ie_update(struct uwb_rc *rc)
+{
+	struct uwb_mas_bm avail;
+
+	bitmap_and(avail.bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS);
+
+	rc->drp_avail.ie.hdr.element_id = UWB_IE_DRP_AVAILABILITY;
+	rc->drp_avail.ie.hdr.length = UWB_NUM_MAS / 8;
+	uwb_mas_bm_copy_le(rc->drp_avail.ie.bmp, &avail);
+	rc->drp_avail.ie_valid = true;
+}
+
+/**
+ * Create an unsigned long from a buffer containing a byte stream.
+ *
+ * @array: pointer to buffer
+ * @itr:   index of buffer from where we start
+ * @len:   the buffer's remaining size may not be exact multiple of
+ *         sizeof(unsigned long), @len is the length of buffer that needs
+ *         to be converted. This will be sizeof(unsigned long) or smaller
+ *         (BUG if not). If it is smaller then we will pad the remaining
+ *         space of the result with zeroes.
+ */
+static
+unsigned long get_val(u8 *array, size_t itr, size_t len)
+{
+	unsigned long val = 0;
+	size_t top = itr + len;
+
+	BUG_ON(len > sizeof(val));
+
+	while (itr < top) {
+		val <<= 8;
+		val |= array[top - 1];
+		top--;
+	}
+	val <<= 8 * (sizeof(val) - len); /* padding */
+	return val;
+}
+
+/**
+ * Initialize bitmap from data buffer.
+ *
+ * The bitmap to be converted could come from a IE, for example a
+ * DRP Availability IE.
+ * From ECMA-368 1.0 [16.8.7]: "
+ * octets: 1            1               N * (0 to 32)
+ *         Element ID   Length (=N)     DRP Availability Bitmap
+ *
+ * The DRP Availability Bitmap field is up to 256 bits long, one
+ * bit for each MAS in the superframe, where the least-significant
+ * bit of the field corresponds to the first MAS in the superframe
+ * and successive bits correspond to successive MASs."
+ *
+ * The DRP Availability bitmap is in octets from 0 to 32, so octet
+ * 32 contains bits for MAS 1-8, etc. If the bitmap is smaller than 32
+ * octets, the bits in octets not included at the end of the bitmap are
+ * treated as zero. In this case (when the bitmap is smaller than 32
+ * octets) the MAS represented range from MAS 1 to MAS (size of bitmap)
+ * with the last octet still containing bits for MAS 1-8, etc.
+ *
+ * For example:
+ * F00F0102 03040506 0708090A 0B0C0D0E 0F010203
+ * ^^^^
+ * ||||
+ * ||||
+ * |||\LSB of byte is MAS 9
+ * ||\MSB of byte is MAS 16
+ * |\LSB of first byte is MAS 1
+ * \ MSB of byte is MAS 8
+ *
+ * An example of this encoding can be found in ECMA-368 Annex-D [Table D.11]
+ *
+ * The resulting bitmap will have the following mapping:
+ *	bit position 0 == MAS 1
+ *	bit position 1 == MAS 2
+ *	...
+ *	bit position (UWB_NUM_MAS - 1) == MAS UWB_NUM_MAS
+ *
+ * @bmp_itr:	pointer to bitmap (can be declared with DECLARE_BITMAP)
+ * @buffer:	pointer to buffer containing bitmap data in big endian
+ *              format (MSB first)
+ * @buffer_size:number of bytes with which bitmap should be initialized
+ */
+static
+void buffer_to_bmp(unsigned long *bmp_itr, void *_buffer,
+		   size_t buffer_size)
+{
+	u8 *buffer = _buffer;
+	size_t itr, len;
+	unsigned long val;
+
+	itr = 0;
+	while (itr < buffer_size) {
+		len = buffer_size - itr >= sizeof(val) ?
+			sizeof(val) : buffer_size - itr;
+		val = get_val(buffer, itr, len);
+		bmp_itr[itr / sizeof(val)] = val;
+		itr += sizeof(val);
+	}
+}
+
+
+/**
+ * Extract DRP Availability bitmap from the notification.
+ *
+ * The notification that comes in contains a bitmap of (UWB_NUM_MAS / 8) bytes
+ * We convert that to our internal representation.
+ */
+static
+int uwbd_evt_get_drp_avail(struct uwb_event *evt, unsigned long *bmp)
+{
+	struct device *dev = &evt->rc->uwb_dev.dev;
+	struct uwb_rc_evt_drp_avail *drp_evt;
+	int result = -EINVAL;
+
+	/* Is there enough data to decode the event? */
+	if (evt->notif.size < sizeof(*drp_evt)) {
+		dev_err(dev, "DRP Availability Change: Not enough "
+			"data to decode event [%zu bytes, %zu "
+			"needed]\n", evt->notif.size, sizeof(*drp_evt));
+		goto error;
+	}
+	drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp_avail, rceb);
+	buffer_to_bmp(bmp, drp_evt->bmp, UWB_NUM_MAS/8);
+	result = 0;
+error:
+	return result;
+}
+
+
+/**
+ * Process an incoming DRP Availability notification.
+ *
+ * @evt:	Event information (packs the actual event data, which
+ *              radio controller it came to, etc).
+ *
+ * @returns:    0 on success (so uwbd() frees the event buffer), < 0
+ *              on error.
+ *
+ * According to ECMA-368 1.0 [16.8.7], bits set to ONE indicate that
+ * the MAS slot is available, bits set to ZERO indicate that the slot
+ * is busy.
+ *
+ * So we clear available slots, we set used slots :)
+ *
+ * The notification only marks non-availability based on the BP and
+ * received DRP IEs that are not for this radio controller.  A copy of
+ * this bitmap is needed to generate the real availability (which
+ * includes local and pending reservations).
+ *
+ * The DRP Availability IE that this radio controller emits will need
+ * to be updated.
+ */
+int uwbd_evt_handle_rc_drp_avail(struct uwb_event *evt)
+{
+	int result;
+	struct uwb_rc *rc = evt->rc;
+	DECLARE_BITMAP(bmp, UWB_NUM_MAS);
+
+	result = uwbd_evt_get_drp_avail(evt, bmp);
+	if (result < 0)
+		return result;
+
+	mutex_lock(&rc->rsvs_mutex);
+	bitmap_copy(rc->drp_avail.global, bmp, UWB_NUM_MAS);
+	rc->drp_avail.ie_valid = false;
+	uwb_rsv_handle_drp_avail_change(rc);
+	mutex_unlock(&rc->rsvs_mutex);
+
+	uwb_rsv_sched_update(rc);
+
+	return 0;
+}
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
new file mode 100644
index 000000000..1d2a939cf
--- /dev/null
+++ b/drivers/uwb/drp-ie.c
@@ -0,0 +1,317 @@
+/*
+ * UWB DRP IE management.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/uwb.h>
+
+#include "uwb-internal.h"
+
+
+/*
+ * Return the reason code for a reservations's DRP IE.
+ */
+static int uwb_rsv_reason_code(struct uwb_rsv *rsv)
+{
+	static const int reason_codes[] = {
+		[UWB_RSV_STATE_O_INITIATED]          = UWB_DRP_REASON_ACCEPTED,
+		[UWB_RSV_STATE_O_PENDING]            = UWB_DRP_REASON_ACCEPTED,
+		[UWB_RSV_STATE_O_MODIFIED]           = UWB_DRP_REASON_MODIFIED,
+		[UWB_RSV_STATE_O_ESTABLISHED]        = UWB_DRP_REASON_ACCEPTED,
+		[UWB_RSV_STATE_O_TO_BE_MOVED]        = UWB_DRP_REASON_ACCEPTED,
+		[UWB_RSV_STATE_O_MOVE_COMBINING]     = UWB_DRP_REASON_MODIFIED,
+		[UWB_RSV_STATE_O_MOVE_REDUCING]      = UWB_DRP_REASON_MODIFIED,
+		[UWB_RSV_STATE_O_MOVE_EXPANDING]     = UWB_DRP_REASON_ACCEPTED,
+		[UWB_RSV_STATE_T_ACCEPTED]           = UWB_DRP_REASON_ACCEPTED,
+		[UWB_RSV_STATE_T_CONFLICT]           = UWB_DRP_REASON_CONFLICT,
+		[UWB_RSV_STATE_T_PENDING]            = UWB_DRP_REASON_PENDING,
+		[UWB_RSV_STATE_T_DENIED]             = UWB_DRP_REASON_DENIED,
+		[UWB_RSV_STATE_T_RESIZED]            = UWB_DRP_REASON_ACCEPTED,
+		[UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = UWB_DRP_REASON_ACCEPTED,
+		[UWB_RSV_STATE_T_EXPANDING_CONFLICT] = UWB_DRP_REASON_CONFLICT,
+		[UWB_RSV_STATE_T_EXPANDING_PENDING]  = UWB_DRP_REASON_PENDING,
+		[UWB_RSV_STATE_T_EXPANDING_DENIED]   = UWB_DRP_REASON_DENIED,
+	};
+
+	return reason_codes[rsv->state];
+}
+
+/*
+ * Return the reason code for a reservations's companion DRP IE .
+ */
+static int uwb_rsv_companion_reason_code(struct uwb_rsv *rsv)
+{
+	static const int companion_reason_codes[] = {
+		[UWB_RSV_STATE_O_MOVE_EXPANDING]     = UWB_DRP_REASON_ACCEPTED,
+		[UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = UWB_DRP_REASON_ACCEPTED,
+		[UWB_RSV_STATE_T_EXPANDING_CONFLICT] = UWB_DRP_REASON_CONFLICT,
+		[UWB_RSV_STATE_T_EXPANDING_PENDING]  = UWB_DRP_REASON_PENDING,
+		[UWB_RSV_STATE_T_EXPANDING_DENIED]   = UWB_DRP_REASON_DENIED,
+	};
+
+	return companion_reason_codes[rsv->state];
+}
+
+/*
+ * Return the status bit for a reservations's DRP IE.
+ */
+int uwb_rsv_status(struct uwb_rsv *rsv)
+{
+	static const int statuses[] = {
+		[UWB_RSV_STATE_O_INITIATED]          = 0,
+		[UWB_RSV_STATE_O_PENDING]            = 0,
+		[UWB_RSV_STATE_O_MODIFIED]           = 1,
+		[UWB_RSV_STATE_O_ESTABLISHED]        = 1,
+		[UWB_RSV_STATE_O_TO_BE_MOVED]        = 0,
+		[UWB_RSV_STATE_O_MOVE_COMBINING]     = 1,
+		[UWB_RSV_STATE_O_MOVE_REDUCING]      = 1,
+		[UWB_RSV_STATE_O_MOVE_EXPANDING]     = 1,
+		[UWB_RSV_STATE_T_ACCEPTED]           = 1,
+		[UWB_RSV_STATE_T_CONFLICT]           = 0,
+		[UWB_RSV_STATE_T_PENDING]            = 0,
+		[UWB_RSV_STATE_T_DENIED]             = 0,
+		[UWB_RSV_STATE_T_RESIZED]            = 1,
+		[UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = 1,
+		[UWB_RSV_STATE_T_EXPANDING_CONFLICT] = 1,
+		[UWB_RSV_STATE_T_EXPANDING_PENDING]  = 1,
+		[UWB_RSV_STATE_T_EXPANDING_DENIED]   = 1,
+
+	};
+
+	return statuses[rsv->state];
+}
+
+/*
+ * Return the status bit for a reservations's companion DRP IE .
+ */
+int uwb_rsv_companion_status(struct uwb_rsv *rsv)
+{
+	static const int companion_statuses[] = {
+		[UWB_RSV_STATE_O_MOVE_EXPANDING]     = 0,
+		[UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = 1,
+		[UWB_RSV_STATE_T_EXPANDING_CONFLICT] = 0,
+		[UWB_RSV_STATE_T_EXPANDING_PENDING]  = 0,
+		[UWB_RSV_STATE_T_EXPANDING_DENIED]   = 0,
+	};
+
+	return companion_statuses[rsv->state];
+}
+
+/*
+ * Allocate a DRP IE.
+ *
+ * To save having to free/allocate a DRP IE when its MAS changes,
+ * enough memory is allocated for the maxiumum number of DRP
+ * allocation fields.  This gives an overhead per reservation of up to
+ * (UWB_NUM_ZONES - 1) * 4 = 60 octets.
+ */
+static struct uwb_ie_drp *uwb_drp_ie_alloc(void)
+{
+	struct uwb_ie_drp *drp_ie;
+
+	drp_ie = kzalloc(sizeof(struct uwb_ie_drp) +
+			UWB_NUM_ZONES * sizeof(struct uwb_drp_alloc),
+			GFP_KERNEL);
+	if (drp_ie)
+		drp_ie->hdr.element_id = UWB_IE_DRP;
+	return drp_ie;
+}
+
+
+/*
+ * Fill a DRP IE's allocation fields from a MAS bitmap.
+ */
+static void uwb_drp_ie_from_bm(struct uwb_ie_drp *drp_ie,
+			       struct uwb_mas_bm *mas)
+{
+	int z, i, num_fields = 0, next = 0;
+	struct uwb_drp_alloc *zones;
+	__le16 current_bmp;
+	DECLARE_BITMAP(tmp_bmp, UWB_NUM_MAS);
+	DECLARE_BITMAP(tmp_mas_bm, UWB_MAS_PER_ZONE);
+
+	zones = drp_ie->allocs;
+
+	bitmap_copy(tmp_bmp, mas->bm, UWB_NUM_MAS);
+
+	/* Determine unique MAS bitmaps in zones from bitmap. */
+	for (z = 0; z < UWB_NUM_ZONES; z++) {
+		bitmap_copy(tmp_mas_bm, tmp_bmp, UWB_MAS_PER_ZONE);
+		if (bitmap_weight(tmp_mas_bm, UWB_MAS_PER_ZONE) > 0) {
+			bool found = false;
+			current_bmp = (__le16) *tmp_mas_bm;
+			for (i = 0; i < next; i++) {
+				if (current_bmp == zones[i].mas_bm) {
+					zones[i].zone_bm |= 1 << z;
+					found = true;
+					break;
+				}
+			}
+			if (!found)  {
+				num_fields++;
+				zones[next].zone_bm = 1 << z;
+				zones[next].mas_bm = current_bmp;
+				next++;
+			}
+		}
+		bitmap_shift_right(tmp_bmp, tmp_bmp, UWB_MAS_PER_ZONE, UWB_NUM_MAS);
+	}
+
+	/* Store in format ready for transmission (le16). */
+	for (i = 0; i < num_fields; i++) {
+		drp_ie->allocs[i].zone_bm = cpu_to_le16(zones[i].zone_bm);
+		drp_ie->allocs[i].mas_bm = cpu_to_le16(zones[i].mas_bm);
+	}
+
+	drp_ie->hdr.length = sizeof(struct uwb_ie_drp) - sizeof(struct uwb_ie_hdr)
+		+ num_fields * sizeof(struct uwb_drp_alloc);
+}
+
+/**
+ * uwb_drp_ie_update - update a reservation's DRP IE
+ * @rsv: the reservation
+ */
+int uwb_drp_ie_update(struct uwb_rsv *rsv)
+{
+	struct uwb_ie_drp *drp_ie;
+	struct uwb_rsv_move *mv;
+	int unsafe;
+
+	if (rsv->state == UWB_RSV_STATE_NONE) {
+		kfree(rsv->drp_ie);
+		rsv->drp_ie = NULL;
+		return 0;
+	}
+
+	unsafe = rsv->mas.unsafe ? 1 : 0;
+
+	if (rsv->drp_ie == NULL) {
+		rsv->drp_ie = uwb_drp_ie_alloc();
+		if (rsv->drp_ie == NULL)
+			return -ENOMEM;
+	}
+	drp_ie = rsv->drp_ie;
+
+	uwb_ie_drp_set_unsafe(drp_ie,       unsafe);
+	uwb_ie_drp_set_tiebreaker(drp_ie,   rsv->tiebreaker);
+	uwb_ie_drp_set_owner(drp_ie,        uwb_rsv_is_owner(rsv));
+	uwb_ie_drp_set_status(drp_ie,       uwb_rsv_status(rsv));
+	uwb_ie_drp_set_reason_code(drp_ie,  uwb_rsv_reason_code(rsv));
+	uwb_ie_drp_set_stream_index(drp_ie, rsv->stream);
+	uwb_ie_drp_set_type(drp_ie,         rsv->type);
+
+	if (uwb_rsv_is_owner(rsv)) {
+		switch (rsv->target.type) {
+		case UWB_RSV_TARGET_DEV:
+			drp_ie->dev_addr = rsv->target.dev->dev_addr;
+			break;
+		case UWB_RSV_TARGET_DEVADDR:
+			drp_ie->dev_addr = rsv->target.devaddr;
+			break;
+		}
+	} else
+		drp_ie->dev_addr = rsv->owner->dev_addr;
+
+	uwb_drp_ie_from_bm(drp_ie, &rsv->mas);
+
+	if (uwb_rsv_has_two_drp_ies(rsv)) {
+		mv = &rsv->mv;
+		if (mv->companion_drp_ie == NULL) {
+			mv->companion_drp_ie = uwb_drp_ie_alloc();
+			if (mv->companion_drp_ie == NULL)
+				return -ENOMEM;
+		}
+		drp_ie = mv->companion_drp_ie;
+
+		/* keep all the same configuration of the main drp_ie */
+		memcpy(drp_ie, rsv->drp_ie, sizeof(struct uwb_ie_drp));
+
+
+		/* FIXME: handle properly the unsafe bit */
+		uwb_ie_drp_set_unsafe(drp_ie,       1);
+		uwb_ie_drp_set_status(drp_ie,       uwb_rsv_companion_status(rsv));
+		uwb_ie_drp_set_reason_code(drp_ie,  uwb_rsv_companion_reason_code(rsv));
+
+		uwb_drp_ie_from_bm(drp_ie, &mv->companion_mas);
+	}
+
+	rsv->ie_valid = true;
+	return 0;
+}
+
+/*
+ * Set MAS bits from given MAS bitmap in a single zone of large bitmap.
+ *
+ * We are given a zone id and the MAS bitmap of bits that need to be set in
+ * this zone. Note that this zone may already have bits set and this only
+ * adds settings - we cannot simply assign the MAS bitmap contents to the
+ * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * bits that are set in the given MAS bitmap.
+ */
+static
+void uwb_drp_ie_single_zone_to_bm(struct uwb_mas_bm *bm, u8 zone, u16 mas_bm)
+{
+	int mas;
+	u16 mas_mask;
+
+	for (mas = 0; mas < UWB_MAS_PER_ZONE; mas++) {
+		mas_mask = 1 << mas;
+		if (mas_bm & mas_mask)
+			set_bit(zone * UWB_NUM_ZONES + mas, bm->bm);
+	}
+}
+
+/**
+ * uwb_drp_ie_zones_to_bm - convert DRP allocation fields to a bitmap
+ * @mas:    MAS bitmap that will be populated to correspond to the
+ *          allocation fields in the DRP IE
+ * @drp_ie: the DRP IE that contains the allocation fields.
+ *
+ * The input format is an array of MAS allocation fields (16 bit Zone
+ * bitmap, 16 bit MAS bitmap) as described in [ECMA-368] section
+ * 16.8.6. The output is a full 256 bit MAS bitmap.
+ *
+ * We go over all the allocation fields, for each allocation field we
+ * know which zones are impacted. We iterate over all the zones
+ * impacted and call a function that will set the correct MAS bits in
+ * each zone.
+ */
+void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie)
+{
+	int numallocs = (drp_ie->hdr.length - 4) / 4;
+	const struct uwb_drp_alloc *alloc;
+	int cnt;
+	u16 zone_bm, mas_bm;
+	u8 zone;
+	u16 zone_mask;
+
+	bitmap_zero(bm->bm, UWB_NUM_MAS);
+
+	for (cnt = 0; cnt < numallocs; cnt++) {
+		alloc = &drp_ie->allocs[cnt];
+		zone_bm = le16_to_cpu(alloc->zone_bm);
+		mas_bm = le16_to_cpu(alloc->mas_bm);
+		for (zone = 0; zone < UWB_NUM_ZONES; zone++)   {
+			zone_mask = 1 << zone;
+			if (zone_bm & zone_mask)
+				uwb_drp_ie_single_zone_to_bm(bm, zone, mas_bm);
+		}
+	}
+}
+
diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c
new file mode 100644
index 000000000..625f706b8
--- /dev/null
+++ b/drivers/uwb/drp.c
@@ -0,0 +1,853 @@
+/*
+ * Ultra Wide Band
+ * Dynamic Reservation Protocol handling
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "uwb-internal.h"
+
+
+/* DRP Conflict Actions ([ECMA-368 2nd Edition] 17.4.6) */
+enum uwb_drp_conflict_action {
+	/* Reservation is maintained, no action needed */
+	UWB_DRP_CONFLICT_MANTAIN = 0,
+
+	/* the device shall not transmit frames in conflicting MASs in
+	 * the following superframe. If the device is the reservation
+	 * target, it shall also set the Reason Code in its DRP IE to
+	 * Conflict in its beacon in the following superframe.
+	 */
+	UWB_DRP_CONFLICT_ACT1,
+
+	/* the device shall not set the Reservation Status bit to ONE
+	 * and shall not transmit frames in conflicting MASs. If the
+	 * device is the reservation target, it shall also set the
+	 * Reason Code in its DRP IE to Conflict.
+	 */
+	UWB_DRP_CONFLICT_ACT2,
+
+	/* the device shall not transmit frames in conflicting MASs in
+	 * the following superframe. It shall remove the conflicting
+	 * MASs from the reservation or set the Reservation Status to
+	 * ZERO in its beacon in the following superframe. If the
+	 * device is the reservation target, it shall also set the
+	 * Reason Code in its DRP IE to Conflict.
+	 */
+	UWB_DRP_CONFLICT_ACT3,
+};
+
+
+static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg,
+				    struct uwb_rceb *reply, ssize_t reply_size)
+{
+	struct uwb_rc_evt_set_drp_ie *r = (struct uwb_rc_evt_set_drp_ie *)reply;
+	unsigned long flags;
+
+	if (r != NULL) {
+		if (r->bResultCode != UWB_RC_RES_SUCCESS)
+			dev_err(&rc->uwb_dev.dev, "SET-DRP-IE failed: %s (%d)\n",
+				uwb_rc_strerror(r->bResultCode), r->bResultCode);
+	} else
+		dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n");
+
+	spin_lock_irqsave(&rc->rsvs_lock, flags);
+	if (rc->set_drp_ie_pending > 1) {
+		rc->set_drp_ie_pending = 0;
+		uwb_rsv_queue_update(rc);
+	} else {
+		rc->set_drp_ie_pending = 0;
+	}
+	spin_unlock_irqrestore(&rc->rsvs_lock, flags);
+}
+
+/**
+ * Construct and send the SET DRP IE
+ *
+ * @rc:         UWB Host controller
+ * @returns:    >= 0 number of bytes still available in the beacon
+ *              < 0 errno code on error.
+ *
+ * See WUSB[8.6.2.7]: The host must set all the DRP IEs that it wants the
+ * device to include in its beacon at the same time. We thus have to
+ * traverse all reservations and include the DRP IEs of all PENDING
+ * and NEGOTIATED reservations in a SET DRP command for transmission.
+ *
+ * A DRP Availability IE is appended.
+ *
+ * rc->rsvs_mutex is held
+ *
+ * FIXME We currently ignore the returned value indicating the remaining space
+ * in beacon. This could be used to deny reservation requests earlier if
+ * determined that they would cause the beacon space to be exceeded.
+ */
+int uwb_rc_send_all_drp_ie(struct uwb_rc *rc)
+{
+	int result;
+	struct uwb_rc_cmd_set_drp_ie *cmd;
+	struct uwb_rsv *rsv;
+	struct uwb_rsv_move *mv;
+	int num_bytes = 0;
+	u8 *IEDataptr;
+
+	result = -ENOMEM;
+	/* First traverse all reservations to determine memory needed. */
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		if (rsv->drp_ie != NULL) {
+			num_bytes += rsv->drp_ie->hdr.length + 2;
+			if (uwb_rsv_has_two_drp_ies(rsv) &&
+				(rsv->mv.companion_drp_ie != NULL)) {
+				mv = &rsv->mv;
+				num_bytes +=
+					mv->companion_drp_ie->hdr.length + 2;
+			}
+		}
+	}
+	num_bytes += sizeof(rc->drp_avail.ie);
+	cmd = kzalloc(sizeof(*cmd) + num_bytes, GFP_KERNEL);
+	if (cmd == NULL)
+		goto error;
+	cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+	cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_DRP_IE);
+	cmd->wIELength = num_bytes;
+	IEDataptr = (u8 *)&cmd->IEData[0];
+
+	/* FIXME: DRV avail IE is not always needed */
+	/* put DRP avail IE first */
+	memcpy(IEDataptr, &rc->drp_avail.ie, sizeof(rc->drp_avail.ie));
+	IEDataptr += sizeof(struct uwb_ie_drp_avail);
+
+	/* Next traverse all reservations to place IEs in allocated memory. */
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		if (rsv->drp_ie != NULL) {
+			memcpy(IEDataptr, rsv->drp_ie,
+			       rsv->drp_ie->hdr.length + 2);
+			IEDataptr += rsv->drp_ie->hdr.length + 2;
+
+			if (uwb_rsv_has_two_drp_ies(rsv) &&
+				(rsv->mv.companion_drp_ie != NULL)) {
+				mv = &rsv->mv;
+				memcpy(IEDataptr, mv->companion_drp_ie,
+				       mv->companion_drp_ie->hdr.length + 2);
+				IEDataptr +=
+					mv->companion_drp_ie->hdr.length + 2;
+			}
+		}
+	}
+
+	result = uwb_rc_cmd_async(rc, "SET-DRP-IE",
+				&cmd->rccb, sizeof(*cmd) + num_bytes,
+				UWB_RC_CET_GENERAL, UWB_RC_CMD_SET_DRP_IE,
+				uwb_rc_set_drp_cmd_done, NULL);
+
+	rc->set_drp_ie_pending = 1;
+
+	kfree(cmd);
+error:
+	return result;
+}
+
+/*
+ * Evaluate the action to perform using conflict resolution rules
+ *
+ * Return a uwb_drp_conflict_action.
+ */
+static int evaluate_conflict_action(struct uwb_ie_drp *ext_drp_ie, int ext_beacon_slot,
+				    struct uwb_rsv *rsv, int our_status)
+{
+	int our_tie_breaker = rsv->tiebreaker;
+	int our_type        = rsv->type;
+	int our_beacon_slot = rsv->rc->uwb_dev.beacon_slot;
+
+	int ext_tie_breaker = uwb_ie_drp_tiebreaker(ext_drp_ie);
+	int ext_status      = uwb_ie_drp_status(ext_drp_ie);
+	int ext_type        = uwb_ie_drp_type(ext_drp_ie);
+
+
+	/* [ECMA-368 2nd Edition] 17.4.6 */
+	if (ext_type == UWB_DRP_TYPE_PCA && our_type == UWB_DRP_TYPE_PCA) {
+		return UWB_DRP_CONFLICT_MANTAIN;
+	}
+
+	/* [ECMA-368 2nd Edition] 17.4.6-1 */
+	if (our_type == UWB_DRP_TYPE_ALIEN_BP) {
+		return UWB_DRP_CONFLICT_MANTAIN;
+	}
+
+	/* [ECMA-368 2nd Edition] 17.4.6-2 */
+	if (ext_type == UWB_DRP_TYPE_ALIEN_BP) {
+		/* here we know our_type != UWB_DRP_TYPE_ALIEN_BP */
+		return UWB_DRP_CONFLICT_ACT1;
+	}
+
+	/* [ECMA-368 2nd Edition] 17.4.6-3 */
+	if (our_status == 0 && ext_status == 1) {
+		return UWB_DRP_CONFLICT_ACT2;
+	}
+
+	/* [ECMA-368 2nd Edition] 17.4.6-4 */
+	if (our_status == 1 && ext_status == 0) {
+		return UWB_DRP_CONFLICT_MANTAIN;
+	}
+
+	/* [ECMA-368 2nd Edition] 17.4.6-5a */
+	if (our_tie_breaker == ext_tie_breaker &&
+	    our_beacon_slot <  ext_beacon_slot) {
+		return UWB_DRP_CONFLICT_MANTAIN;
+	}
+
+	/* [ECMA-368 2nd Edition] 17.4.6-5b */
+	if (our_tie_breaker != ext_tie_breaker &&
+	    our_beacon_slot >  ext_beacon_slot) {
+		return UWB_DRP_CONFLICT_MANTAIN;
+	}
+
+	if (our_status == 0) {
+		if (our_tie_breaker == ext_tie_breaker) {
+			/* [ECMA-368 2nd Edition] 17.4.6-6a */
+			if (our_beacon_slot > ext_beacon_slot) {
+				return UWB_DRP_CONFLICT_ACT2;
+			}
+		} else  {
+			/* [ECMA-368 2nd Edition] 17.4.6-6b */
+			if (our_beacon_slot < ext_beacon_slot) {
+				return UWB_DRP_CONFLICT_ACT2;
+			}
+		}
+	} else {
+		if (our_tie_breaker == ext_tie_breaker) {
+			/* [ECMA-368 2nd Edition] 17.4.6-7a */
+			if (our_beacon_slot > ext_beacon_slot) {
+				return UWB_DRP_CONFLICT_ACT3;
+			}
+		} else {
+			/* [ECMA-368 2nd Edition] 17.4.6-7b */
+			if (our_beacon_slot < ext_beacon_slot) {
+				return UWB_DRP_CONFLICT_ACT3;
+			}
+		}
+	}
+	return UWB_DRP_CONFLICT_MANTAIN;
+}
+
+static void handle_conflict_normal(struct uwb_ie_drp *drp_ie,
+				   int ext_beacon_slot,
+				   struct uwb_rsv *rsv,
+				   struct uwb_mas_bm *conflicting_mas)
+{
+	struct uwb_rc *rc = rsv->rc;
+	struct uwb_rsv_move *mv = &rsv->mv;
+	struct uwb_drp_backoff_win *bow = &rc->bow;
+	int action;
+
+	action = evaluate_conflict_action(drp_ie, ext_beacon_slot, rsv, uwb_rsv_status(rsv));
+
+	if (uwb_rsv_is_owner(rsv)) {
+		switch(action) {
+		case UWB_DRP_CONFLICT_ACT2:
+			/* try move */
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_TO_BE_MOVED);
+			if (bow->can_reserve_extra_mases == false)
+				uwb_rsv_backoff_win_increment(rc);
+
+			break;
+		case UWB_DRP_CONFLICT_ACT3:
+			uwb_rsv_backoff_win_increment(rc);
+			/* drop some mases with reason modified */
+			/* put in the companion the mases to be dropped */
+			bitmap_and(mv->companion_mas.bm, rsv->mas.bm, conflicting_mas->bm, UWB_NUM_MAS);
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED);
+		default:
+			break;
+		}
+	} else {
+		switch(action) {
+		case UWB_DRP_CONFLICT_ACT2:
+		case UWB_DRP_CONFLICT_ACT3:
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT);
+		default:
+			break;
+		}
+
+	}
+
+}
+
+static void handle_conflict_expanding(struct uwb_ie_drp *drp_ie, int ext_beacon_slot,
+				      struct uwb_rsv *rsv, bool companion_only,
+				      struct uwb_mas_bm *conflicting_mas)
+{
+	struct uwb_rc *rc = rsv->rc;
+	struct uwb_drp_backoff_win *bow = &rc->bow;
+	struct uwb_rsv_move *mv = &rsv->mv;
+	int action;
+
+	if (companion_only) {
+		/* status of companion is 0 at this point */
+		action = evaluate_conflict_action(drp_ie, ext_beacon_slot, rsv, 0);
+		if (uwb_rsv_is_owner(rsv)) {
+			switch(action) {
+			case UWB_DRP_CONFLICT_ACT2:
+			case UWB_DRP_CONFLICT_ACT3:
+				uwb_rsv_set_state(rsv,
+						UWB_RSV_STATE_O_ESTABLISHED);
+				rsv->needs_release_companion_mas = false;
+				if (bow->can_reserve_extra_mases == false)
+					uwb_rsv_backoff_win_increment(rc);
+				uwb_drp_avail_release(rsv->rc,
+						&rsv->mv.companion_mas);
+			}
+		} else { /* rsv is target */
+			switch(action) {
+			case UWB_DRP_CONFLICT_ACT2:
+			case UWB_DRP_CONFLICT_ACT3:
+				uwb_rsv_set_state(rsv,
+					UWB_RSV_STATE_T_EXPANDING_CONFLICT);
+                                /* send_drp_avail_ie = true; */
+			}
+		}
+	} else { /* also base part of the reservation is conflicting */
+		if (uwb_rsv_is_owner(rsv)) {
+			uwb_rsv_backoff_win_increment(rc);
+			/* remove companion part */
+			uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas);
+
+			/* drop some mases with reason modified */
+
+			/* put in the companion the mases to be dropped */
+			bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm,
+					conflicting_mas->bm, UWB_NUM_MAS);
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED);
+		} else { /* it is a target rsv */
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT);
+                        /* send_drp_avail_ie = true; */
+		}
+	}
+}
+
+static void uwb_drp_handle_conflict_rsv(struct uwb_rc *rc, struct uwb_rsv *rsv,
+					struct uwb_rc_evt_drp *drp_evt,
+					struct uwb_ie_drp *drp_ie,
+					struct uwb_mas_bm *conflicting_mas)
+{
+	struct uwb_rsv_move *mv;
+
+	/* check if the conflicting reservation has two drp_ies */
+	if (uwb_rsv_has_two_drp_ies(rsv)) {
+		mv = &rsv->mv;
+		if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm,
+								UWB_NUM_MAS)) {
+			handle_conflict_expanding(drp_ie,
+						drp_evt->beacon_slot_number,
+						rsv, false, conflicting_mas);
+		} else {
+			if (bitmap_intersects(mv->companion_mas.bm,
+					conflicting_mas->bm, UWB_NUM_MAS)) {
+				handle_conflict_expanding(
+					drp_ie, drp_evt->beacon_slot_number,
+					rsv, true, conflicting_mas);
+			}
+		}
+	} else if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm,
+							UWB_NUM_MAS)) {
+		handle_conflict_normal(drp_ie, drp_evt->beacon_slot_number,
+					rsv, conflicting_mas);
+	}
+}
+
+static void uwb_drp_handle_all_conflict_rsv(struct uwb_rc *rc,
+					    struct uwb_rc_evt_drp *drp_evt,
+					    struct uwb_ie_drp *drp_ie,
+					    struct uwb_mas_bm *conflicting_mas)
+{
+	struct uwb_rsv *rsv;
+
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		uwb_drp_handle_conflict_rsv(rc, rsv, drp_evt, drp_ie,
+							conflicting_mas);
+	}
+}
+
+static void uwb_drp_process_target_accepted(struct uwb_rc *rc,
+	struct uwb_rsv *rsv, struct uwb_rc_evt_drp *drp_evt,
+	struct uwb_ie_drp *drp_ie, struct uwb_mas_bm *mas)
+{
+	struct uwb_rsv_move *mv = &rsv->mv;
+	int status;
+
+	status = uwb_ie_drp_status(drp_ie);
+
+	if (rsv->state == UWB_RSV_STATE_T_CONFLICT) {
+		uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT);
+		return;
+	}
+
+	if (rsv->state == UWB_RSV_STATE_T_EXPANDING_ACCEPTED) {
+		/* drp_ie is companion */
+		if (!bitmap_equal(rsv->mas.bm, mas->bm, UWB_NUM_MAS)) {
+			/* stroke companion */
+			uwb_rsv_set_state(rsv,
+				UWB_RSV_STATE_T_EXPANDING_ACCEPTED);
+		}
+	} else {
+		if (!bitmap_equal(rsv->mas.bm, mas->bm, UWB_NUM_MAS)) {
+			if (uwb_drp_avail_reserve_pending(rc, mas) == -EBUSY) {
+				/* FIXME: there is a conflict, find
+				 * the conflicting reservations and
+				 * take a sensible action. Consider
+				 * that in drp_ie there is the
+				 * "neighbour" */
+				uwb_drp_handle_all_conflict_rsv(rc, drp_evt,
+						drp_ie, mas);
+			} else {
+				/* accept the extra reservation */
+				bitmap_copy(mv->companion_mas.bm, mas->bm,
+								UWB_NUM_MAS);
+				uwb_rsv_set_state(rsv,
+					UWB_RSV_STATE_T_EXPANDING_ACCEPTED);
+			}
+		} else {
+			if (status) {
+				uwb_rsv_set_state(rsv,
+						UWB_RSV_STATE_T_ACCEPTED);
+			}
+		}
+
+	}
+}
+
+/*
+ * Based on the DRP IE, transition a target reservation to a new
+ * state.
+ */
+static void uwb_drp_process_target(struct uwb_rc *rc, struct uwb_rsv *rsv,
+		   struct uwb_ie_drp *drp_ie, struct uwb_rc_evt_drp *drp_evt)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rsv_move *mv = &rsv->mv;
+	int status;
+	enum uwb_drp_reason reason_code;
+	struct uwb_mas_bm mas;
+
+	status = uwb_ie_drp_status(drp_ie);
+	reason_code = uwb_ie_drp_reason_code(drp_ie);
+	uwb_drp_ie_to_bm(&mas, drp_ie);
+
+	switch (reason_code) {
+	case UWB_DRP_REASON_ACCEPTED:
+		uwb_drp_process_target_accepted(rc, rsv, drp_evt, drp_ie, &mas);
+		break;
+
+	case UWB_DRP_REASON_MODIFIED:
+		/* check to see if we have already modified the reservation */
+		if (bitmap_equal(rsv->mas.bm, mas.bm, UWB_NUM_MAS)) {
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED);
+			break;
+		}
+
+		/* find if the owner wants to expand or reduce */
+		if (bitmap_subset(mas.bm, rsv->mas.bm, UWB_NUM_MAS)) {
+			/* owner is reducing */
+			bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, mas.bm,
+				UWB_NUM_MAS);
+			uwb_drp_avail_release(rsv->rc, &mv->companion_mas);
+		}
+
+		bitmap_copy(rsv->mas.bm, mas.bm, UWB_NUM_MAS);
+		uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_RESIZED);
+		break;
+	default:
+		dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
+			 reason_code, status);
+	}
+}
+
+static void uwb_drp_process_owner_accepted(struct uwb_rsv *rsv,
+						struct uwb_mas_bm *mas)
+{
+	struct uwb_rsv_move *mv = &rsv->mv;
+
+	switch (rsv->state) {
+	case UWB_RSV_STATE_O_PENDING:
+	case UWB_RSV_STATE_O_INITIATED:
+	case UWB_RSV_STATE_O_ESTABLISHED:
+		uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+		break;
+	case UWB_RSV_STATE_O_MODIFIED:
+		if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS))
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+		else
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED);
+		break;
+
+	case UWB_RSV_STATE_O_MOVE_REDUCING: /* shouldn' t be a problem */
+		if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS))
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+		else
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
+		break;
+	case UWB_RSV_STATE_O_MOVE_EXPANDING:
+		if (bitmap_equal(mas->bm, mv->companion_mas.bm, UWB_NUM_MAS)) {
+			/* Companion reservation accepted */
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
+		} else {
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING);
+		}
+		break;
+	case UWB_RSV_STATE_O_MOVE_COMBINING:
+		if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS))
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
+		else
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
+		break;
+	default:
+		break;
+	}
+}
+/*
+ * Based on the DRP IE, transition an owner reservation to a new
+ * state.
+ */
+static void uwb_drp_process_owner(struct uwb_rc *rc, struct uwb_rsv *rsv,
+				  struct uwb_dev *src, struct uwb_ie_drp *drp_ie,
+				  struct uwb_rc_evt_drp *drp_evt)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	int status;
+	enum uwb_drp_reason reason_code;
+	struct uwb_mas_bm mas;
+
+	status = uwb_ie_drp_status(drp_ie);
+	reason_code = uwb_ie_drp_reason_code(drp_ie);
+	uwb_drp_ie_to_bm(&mas, drp_ie);
+
+	if (status) {
+		switch (reason_code) {
+		case UWB_DRP_REASON_ACCEPTED:
+			uwb_drp_process_owner_accepted(rsv, &mas);
+			break;
+		default:
+			dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
+				 reason_code, status);
+		}
+	} else {
+		switch (reason_code) {
+		case UWB_DRP_REASON_PENDING:
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_PENDING);
+			break;
+		case UWB_DRP_REASON_DENIED:
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+			break;
+		case UWB_DRP_REASON_CONFLICT:
+			/* resolve the conflict */
+			bitmap_complement(mas.bm, src->last_availability_bm,
+					  UWB_NUM_MAS);
+			uwb_drp_handle_conflict_rsv(rc, rsv, drp_evt, drp_ie, &mas);
+			break;
+		default:
+			dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
+				 reason_code, status);
+		}
+	}
+}
+
+static void uwb_cnflt_alien_stroke_timer(struct uwb_cnflt_alien *cnflt)
+{
+	unsigned timeout_us = UWB_MAX_LOST_BEACONS * UWB_SUPERFRAME_LENGTH_US;
+	mod_timer(&cnflt->timer, jiffies + usecs_to_jiffies(timeout_us));
+}
+
+static void uwb_cnflt_update_work(struct work_struct *work)
+{
+	struct uwb_cnflt_alien *cnflt = container_of(work,
+						     struct uwb_cnflt_alien,
+						     cnflt_update_work);
+	struct uwb_cnflt_alien *c;
+	struct uwb_rc *rc = cnflt->rc;
+
+	unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE;
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	list_del(&cnflt->rc_node);
+
+	/* update rc global conflicting alien bitmap */
+	bitmap_zero(rc->cnflt_alien_bitmap.bm, UWB_NUM_MAS);
+
+	list_for_each_entry(c, &rc->cnflt_alien_list, rc_node) {
+		bitmap_or(rc->cnflt_alien_bitmap.bm, rc->cnflt_alien_bitmap.bm,
+						c->mas.bm, UWB_NUM_MAS);
+	}
+
+	queue_delayed_work(rc->rsv_workq, &rc->rsv_alien_bp_work,
+					usecs_to_jiffies(delay_us));
+
+	kfree(cnflt);
+	mutex_unlock(&rc->rsvs_mutex);
+}
+
+static void uwb_cnflt_timer(struct timer_list *t)
+{
+	struct uwb_cnflt_alien *cnflt = from_timer(cnflt, t, timer);
+
+	queue_work(cnflt->rc->rsv_workq, &cnflt->cnflt_update_work);
+}
+
+/*
+ * We have received an DRP_IE of type Alien BP and we need to make
+ * sure we do not transmit in conflicting MASs.
+ */
+static void uwb_drp_handle_alien_drp(struct uwb_rc *rc, struct uwb_ie_drp *drp_ie)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_mas_bm mas;
+	struct uwb_cnflt_alien *cnflt;
+	unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE;
+
+	uwb_drp_ie_to_bm(&mas, drp_ie);
+
+	list_for_each_entry(cnflt, &rc->cnflt_alien_list, rc_node) {
+		if (bitmap_equal(cnflt->mas.bm, mas.bm, UWB_NUM_MAS)) {
+			/* Existing alien BP reservation conflicting
+			 * bitmap, just reset the timer */
+			uwb_cnflt_alien_stroke_timer(cnflt);
+			return;
+		}
+	}
+
+	/* New alien BP reservation conflicting bitmap */
+
+	/* alloc and initialize new uwb_cnflt_alien */
+	cnflt = kzalloc(sizeof(struct uwb_cnflt_alien), GFP_KERNEL);
+	if (!cnflt) {
+		dev_err(dev, "failed to alloc uwb_cnflt_alien struct\n");
+		return;
+	}
+
+	INIT_LIST_HEAD(&cnflt->rc_node);
+	timer_setup(&cnflt->timer, uwb_cnflt_timer, 0);
+
+	cnflt->rc = rc;
+	INIT_WORK(&cnflt->cnflt_update_work, uwb_cnflt_update_work);
+
+	bitmap_copy(cnflt->mas.bm, mas.bm, UWB_NUM_MAS);
+
+	list_add_tail(&cnflt->rc_node, &rc->cnflt_alien_list);
+
+	/* update rc global conflicting alien bitmap */
+	bitmap_or(rc->cnflt_alien_bitmap.bm, rc->cnflt_alien_bitmap.bm, mas.bm, UWB_NUM_MAS);
+
+	queue_delayed_work(rc->rsv_workq, &rc->rsv_alien_bp_work, usecs_to_jiffies(delay_us));
+
+	/* start the timer */
+	uwb_cnflt_alien_stroke_timer(cnflt);
+}
+
+static void uwb_drp_process_not_involved(struct uwb_rc *rc,
+					 struct uwb_rc_evt_drp *drp_evt,
+					 struct uwb_ie_drp *drp_ie)
+{
+	struct uwb_mas_bm mas;
+
+	uwb_drp_ie_to_bm(&mas, drp_ie);
+	uwb_drp_handle_all_conflict_rsv(rc, drp_evt, drp_ie, &mas);
+}
+
+static void uwb_drp_process_involved(struct uwb_rc *rc, struct uwb_dev *src,
+				     struct uwb_rc_evt_drp *drp_evt,
+				     struct uwb_ie_drp *drp_ie)
+{
+	struct uwb_rsv *rsv;
+
+	rsv = uwb_rsv_find(rc, src, drp_ie);
+	if (!rsv) {
+		/*
+		 * No reservation? It's either for a recently
+		 * terminated reservation; or the DRP IE couldn't be
+		 * processed (e.g., an invalid IE or out of memory).
+		 */
+		return;
+	}
+
+	/*
+	 * Do nothing with DRP IEs for reservations that have been
+	 * terminated.
+	 */
+	if (rsv->state == UWB_RSV_STATE_NONE) {
+		uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+		return;
+	}
+
+	if (uwb_ie_drp_owner(drp_ie))
+		uwb_drp_process_target(rc, rsv, drp_ie, drp_evt);
+	else
+		uwb_drp_process_owner(rc, rsv, src, drp_ie, drp_evt);
+
+}
+
+
+static bool uwb_drp_involves_us(struct uwb_rc *rc, struct uwb_ie_drp *drp_ie)
+{
+	return uwb_dev_addr_cmp(&rc->uwb_dev.dev_addr, &drp_ie->dev_addr) == 0;
+}
+
+/*
+ * Process a received DRP IE.
+ */
+static void uwb_drp_process(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt,
+			    struct uwb_dev *src, struct uwb_ie_drp *drp_ie)
+{
+	if (uwb_ie_drp_type(drp_ie) == UWB_DRP_TYPE_ALIEN_BP)
+		uwb_drp_handle_alien_drp(rc, drp_ie);
+	else if (uwb_drp_involves_us(rc, drp_ie))
+		uwb_drp_process_involved(rc, src, drp_evt, drp_ie);
+	else
+		uwb_drp_process_not_involved(rc, drp_evt, drp_ie);
+}
+
+/*
+ * Process a received DRP Availability IE
+ */
+static void uwb_drp_availability_process(struct uwb_rc *rc, struct uwb_dev *src,
+					 struct uwb_ie_drp_avail *drp_availability_ie)
+{
+	bitmap_copy(src->last_availability_bm,
+		    drp_availability_ie->bmp, UWB_NUM_MAS);
+}
+
+/*
+ * Process all the DRP IEs (both DRP IEs and the DRP Availability IE)
+ * from a device.
+ */
+static
+void uwb_drp_process_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt,
+			 size_t ielen, struct uwb_dev *src_dev)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_ie_hdr *ie_hdr;
+	void *ptr;
+
+	ptr = drp_evt->ie_data;
+	for (;;) {
+		ie_hdr = uwb_ie_next(&ptr, &ielen);
+		if (!ie_hdr)
+			break;
+
+		switch (ie_hdr->element_id) {
+		case UWB_IE_DRP_AVAILABILITY:
+			uwb_drp_availability_process(rc, src_dev, (struct uwb_ie_drp_avail *)ie_hdr);
+			break;
+		case UWB_IE_DRP:
+			uwb_drp_process(rc, drp_evt, src_dev, (struct uwb_ie_drp *)ie_hdr);
+			break;
+		default:
+			dev_warn(dev, "unexpected IE in DRP notification\n");
+			break;
+		}
+	}
+
+	if (ielen > 0)
+		dev_warn(dev, "%d octets remaining in DRP notification\n",
+			 (int)ielen);
+}
+
+/**
+ * uwbd_evt_handle_rc_drp - handle a DRP_IE event
+ * @evt: the DRP_IE event from the radio controller
+ *
+ * This processes DRP notifications from the radio controller, either
+ * initiating a new reservation or transitioning an existing
+ * reservation into a different state.
+ *
+ * DRP notifications can occur for three different reasons:
+ *
+ * - UWB_DRP_NOTIF_DRP_IE_RECVD: one or more DRP IEs with the RC as
+ *   the target or source have been received.
+ *
+ *   These DRP IEs could be new or for an existing reservation.
+ *
+ *   If the DRP IE for an existing reservation ceases to be to
+ *   received for at least mMaxLostBeacons, the reservation should be
+ *   considered to be terminated.  Note that the TERMINATE reason (see
+ *   below) may not always be signalled (e.g., the remote device has
+ *   two or more reservations established with the RC).
+ *
+ * - UWB_DRP_NOTIF_CONFLICT: DRP IEs from any device in the beacon
+ *   group conflict with the RC's reservations.
+ *
+ * - UWB_DRP_NOTIF_TERMINATE: DRP IEs are no longer being received
+ *   from a device (i.e., it's terminated all reservations).
+ *
+ * Only the software state of the reservations is changed; the setting
+ * of the radio controller's DRP IEs is done after all the events in
+ * an event buffer are processed.  This saves waiting multiple times
+ * for the SET_DRP_IE command to complete.
+ */
+int uwbd_evt_handle_rc_drp(struct uwb_event *evt)
+{
+	struct device *dev = &evt->rc->uwb_dev.dev;
+	struct uwb_rc *rc = evt->rc;
+	struct uwb_rc_evt_drp *drp_evt;
+	size_t ielength, bytes_left;
+	struct uwb_dev_addr src_addr;
+	struct uwb_dev *src_dev;
+
+	/* Is there enough data to decode the event (and any IEs in
+	   its payload)? */
+	if (evt->notif.size < sizeof(*drp_evt)) {
+		dev_err(dev, "DRP event: Not enough data to decode event "
+			"[%zu bytes left, %zu needed]\n",
+			evt->notif.size, sizeof(*drp_evt));
+		return 0;
+	}
+	bytes_left = evt->notif.size - sizeof(*drp_evt);
+	drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp, rceb);
+	ielength = le16_to_cpu(drp_evt->ie_length);
+	if (bytes_left != ielength) {
+		dev_err(dev, "DRP event: Not enough data in payload [%zu"
+			"bytes left, %zu declared in the event]\n",
+			bytes_left, ielength);
+		return 0;
+	}
+
+	memcpy(src_addr.data, &drp_evt->src_addr, sizeof(src_addr));
+	src_dev = uwb_dev_get_by_devaddr(rc, &src_addr);
+	if (!src_dev) {
+		/*
+		 * A DRP notification from an unrecognized device.
+		 *
+		 * This is probably from a WUSB device that doesn't
+		 * have an EUI-48 and therefore doesn't show up in the
+		 * UWB device database.  It's safe to simply ignore
+		 * these.
+		 */
+		return 0;
+	}
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	/* We do not distinguish from the reason */
+	uwb_drp_process_all(rc, drp_evt, ielength, src_dev);
+
+	mutex_unlock(&rc->rsvs_mutex);
+
+	uwb_dev_put(src_dev);
+	return 0;
+}
diff --git a/drivers/uwb/est.c b/drivers/uwb/est.c
new file mode 100644
index 000000000..ad30ddfe3
--- /dev/null
+++ b/drivers/uwb/est.c
@@ -0,0 +1,464 @@
+/*
+ * Ultra Wide Band Radio Control
+ * Event Size Tables management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * Infrastructure, code and data tables for guessing the size of
+ * events received on the notification endpoints of UWB radio
+ * controllers.
+ *
+ * You define a table of events and for each, its size and how to get
+ * the extra size.
+ *
+ * ENTRY POINTS:
+ *
+ * uwb_est_{init/destroy}(): To initialize/release the EST subsystem.
+ *
+ * uwb_est_[u]register(): To un/register event size tables
+ *   uwb_est_grow()
+ *
+ * uwb_est_find_size(): Get the size of an event
+ *   uwb_est_get_size()
+ */
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+struct uwb_est {
+	u16 type_event_high;
+	u16 vendor, product;
+	u8 entries;
+	const struct uwb_est_entry *entry;
+};
+
+static struct uwb_est *uwb_est;
+static u8 uwb_est_size;
+static u8 uwb_est_used;
+static DEFINE_RWLOCK(uwb_est_lock);
+
+/**
+ * WUSB Standard Event Size Table, HWA-RC interface
+ *
+ * Sizes for events and notifications type 0 (general), high nibble 0.
+ */
+static
+struct uwb_est_entry uwb_est_00_00xx[] = {
+	[UWB_RC_EVT_IE_RCV] = {
+		.size = sizeof(struct uwb_rc_evt_ie_rcv),
+		.offset = 1 + offsetof(struct uwb_rc_evt_ie_rcv, wIELength),
+	},
+	[UWB_RC_EVT_BEACON] = {
+		.size = sizeof(struct uwb_rc_evt_beacon),
+		.offset = 1 + offsetof(struct uwb_rc_evt_beacon, wBeaconInfoLength),
+	},
+	[UWB_RC_EVT_BEACON_SIZE] = {
+		.size = sizeof(struct uwb_rc_evt_beacon_size),
+	},
+	[UWB_RC_EVT_BPOIE_CHANGE] = {
+		.size = sizeof(struct uwb_rc_evt_bpoie_change),
+		.offset = 1 + offsetof(struct uwb_rc_evt_bpoie_change,
+				       wBPOIELength),
+	},
+	[UWB_RC_EVT_BP_SLOT_CHANGE] = {
+		.size = sizeof(struct uwb_rc_evt_bp_slot_change),
+	},
+	[UWB_RC_EVT_BP_SWITCH_IE_RCV] = {
+		.size = sizeof(struct uwb_rc_evt_bp_switch_ie_rcv),
+		.offset = 1 + offsetof(struct uwb_rc_evt_bp_switch_ie_rcv, wIELength),
+	},
+	[UWB_RC_EVT_DEV_ADDR_CONFLICT] = {
+		.size = sizeof(struct uwb_rc_evt_dev_addr_conflict),
+	},
+	[UWB_RC_EVT_DRP_AVAIL] = {
+		.size = sizeof(struct uwb_rc_evt_drp_avail)
+	},
+	[UWB_RC_EVT_DRP] = {
+		.size = sizeof(struct uwb_rc_evt_drp),
+		.offset = 1 + offsetof(struct uwb_rc_evt_drp, ie_length),
+	},
+	[UWB_RC_EVT_BP_SWITCH_STATUS] = {
+		.size = sizeof(struct uwb_rc_evt_bp_switch_status),
+	},
+	[UWB_RC_EVT_CMD_FRAME_RCV] = {
+		.size = sizeof(struct uwb_rc_evt_cmd_frame_rcv),
+		.offset = 1 + offsetof(struct uwb_rc_evt_cmd_frame_rcv, dataLength),
+	},
+	[UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV] = {
+		.size = sizeof(struct uwb_rc_evt_channel_change_ie_rcv),
+		.offset = 1 + offsetof(struct uwb_rc_evt_channel_change_ie_rcv, wIELength),
+	},
+	[UWB_RC_CMD_CHANNEL_CHANGE] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_DEV_ADDR_MGMT] = {
+		.size = sizeof(struct uwb_rc_evt_dev_addr_mgmt) },
+	[UWB_RC_CMD_GET_IE] = {
+		.size = sizeof(struct uwb_rc_evt_get_ie),
+		.offset = 1 + offsetof(struct uwb_rc_evt_get_ie, wIELength),
+	},
+	[UWB_RC_CMD_RESET] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SCAN] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SET_BEACON_FILTER] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SET_DRP_IE] = {
+		.size = sizeof(struct uwb_rc_evt_set_drp_ie),
+	},
+	[UWB_RC_CMD_SET_IE] = {
+		.size = sizeof(struct uwb_rc_evt_set_ie),
+	},
+	[UWB_RC_CMD_SET_NOTIFICATION_FILTER] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SET_TX_POWER] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SLEEP] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_START_BEACON] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_STOP_BEACON] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_BP_MERGE] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SEND_COMMAND_FRAME] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SET_ASIE_NOTIF] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+};
+
+static
+struct uwb_est_entry uwb_est_01_00xx[] = {
+	[UWB_RC_DAA_ENERGY_DETECTED] = {
+		.size = sizeof(struct uwb_rc_evt_daa_energy_detected),
+	},
+	[UWB_RC_SET_DAA_ENERGY_MASK] = {
+		.size = sizeof(struct uwb_rc_evt_set_daa_energy_mask),
+	},
+	[UWB_RC_SET_NOTIFICATION_FILTER_EX] = {
+		.size = sizeof(struct uwb_rc_evt_set_notification_filter_ex),
+	},
+};
+
+/**
+ * Initialize the EST subsystem
+ *
+ * Register the standard tables also.
+ *
+ * FIXME: tag init
+ */
+int uwb_est_create(void)
+{
+	int result;
+
+	uwb_est_size = 2;
+	uwb_est_used = 0;
+	uwb_est = kcalloc(uwb_est_size, sizeof(uwb_est[0]), GFP_KERNEL);
+	if (uwb_est == NULL)
+		return -ENOMEM;
+
+	result = uwb_est_register(UWB_RC_CET_GENERAL, 0, 0xffff, 0xffff,
+				  uwb_est_00_00xx, ARRAY_SIZE(uwb_est_00_00xx));
+	if (result < 0)
+		goto out;
+	result = uwb_est_register(UWB_RC_CET_EX_TYPE_1, 0, 0xffff, 0xffff,
+				  uwb_est_01_00xx, ARRAY_SIZE(uwb_est_01_00xx));
+out:
+	return result;
+}
+
+
+/** Clean it up */
+void uwb_est_destroy(void)
+{
+	kfree(uwb_est);
+	uwb_est = NULL;
+	uwb_est_size = uwb_est_used = 0;
+}
+
+
+/**
+ * Double the capacity of the EST table
+ *
+ * @returns 0 if ok, < 0 errno no error.
+ */
+static
+int uwb_est_grow(void)
+{
+	size_t actual_size = uwb_est_size * sizeof(uwb_est[0]);
+	void *new = kmalloc_array(2, actual_size, GFP_ATOMIC);
+	if (new == NULL)
+		return -ENOMEM;
+	memcpy(new, uwb_est, actual_size);
+	memset(new + actual_size, 0, actual_size);
+	kfree(uwb_est);
+	uwb_est = new;
+	uwb_est_size *= 2;
+	return 0;
+}
+
+
+/**
+ * Register an event size table
+ *
+ * Makes room for it if the table is full, and then inserts  it in the
+ * right position (entries are sorted by type, event_high, vendor and
+ * then product).
+ *
+ * @vendor:  vendor code for matching against the device (0x0000 and
+ *           0xffff mean any); use 0x0000 to force all to match without
+ *           checking possible vendor specific ones, 0xfffff to match
+ *           after checking vendor specific ones.
+ *
+ * @product: product code from that vendor; same matching rules, use
+ *           0x0000 for not allowing vendor specific matches, 0xffff
+ *           for allowing.
+ *
+ * This arragement just makes the tables sort differenty. Because the
+ * table is sorted by growing type-event_high-vendor-product, a zero
+ * vendor will match before than a 0x456a vendor, that will match
+ * before a 0xfffff vendor.
+ *
+ * @returns 0 if ok, < 0 errno on error (-ENOENT if not found).
+ */
+/* FIXME: add bus type to vendor/product code */
+int uwb_est_register(u8 type, u8 event_high, u16 vendor, u16 product,
+		     const struct uwb_est_entry *entry, size_t entries)
+{
+	unsigned long flags;
+	unsigned itr;
+	int result = 0;
+
+	write_lock_irqsave(&uwb_est_lock, flags);
+	if (uwb_est_used == uwb_est_size) {
+		result = uwb_est_grow();
+		if (result < 0)
+			goto out;
+	}
+	/* Find the right spot to insert it in */
+	for (itr = 0; itr < uwb_est_used; itr++)
+		if (uwb_est[itr].type_event_high < type
+		    && uwb_est[itr].vendor < vendor
+		    && uwb_est[itr].product < product)
+			break;
+
+	/* Shift others to make room for the new one? */
+	if (itr < uwb_est_used)
+		memmove(&uwb_est[itr+1], &uwb_est[itr], uwb_est_used - itr);
+	uwb_est[itr].type_event_high = type << 8 | event_high;
+	uwb_est[itr].vendor = vendor;
+	uwb_est[itr].product = product;
+	uwb_est[itr].entry = entry;
+	uwb_est[itr].entries = entries;
+	uwb_est_used++;
+out:
+	write_unlock_irqrestore(&uwb_est_lock, flags);
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_est_register);
+
+
+/**
+ * Unregister an event size table
+ *
+ * This just removes the specified entry and moves the ones after it
+ * to fill in the gap. This is needed to keep the list sorted; no
+ * reallocation is done to reduce the size of the table.
+ *
+ * We unregister by all the data we used to register instead of by
+ * pointer to the @entry array because we might have used the same
+ * table for a bunch of IDs (for example).
+ *
+ * @returns 0 if ok, < 0 errno on error (-ENOENT if not found).
+ */
+int uwb_est_unregister(u8 type, u8 event_high, u16 vendor, u16 product,
+		       const struct uwb_est_entry *entry, size_t entries)
+{
+	unsigned long flags;
+	unsigned itr;
+	struct uwb_est est_cmp = {
+		.type_event_high = type << 8 | event_high,
+		.vendor = vendor,
+		.product = product,
+		.entry = entry,
+		.entries = entries
+	};
+	write_lock_irqsave(&uwb_est_lock, flags);
+	for (itr = 0; itr < uwb_est_used; itr++)
+		if (!memcmp(&uwb_est[itr], &est_cmp, sizeof(est_cmp)))
+			goto found;
+	write_unlock_irqrestore(&uwb_est_lock, flags);
+	return -ENOENT;
+
+found:
+	if (itr < uwb_est_used - 1)	/* Not last one? move ones above */
+		memmove(&uwb_est[itr], &uwb_est[itr+1], uwb_est_used - itr - 1);
+	uwb_est_used--;
+	write_unlock_irqrestore(&uwb_est_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_est_unregister);
+
+
+/**
+ * Get the size of an event from a table
+ *
+ * @rceb: pointer to the buffer with the event
+ * @rceb_size: size of the area pointed to by @rceb in bytes.
+ * @returns: > 0      Size of the event
+ *	     -ENOSPC  An area big enough was not provided to look
+ *		      ahead into the event's guts and guess the size.
+ *	     -EINVAL  Unknown event code (wEvent).
+ *
+ * This will look at the received RCEB and guess what is the total
+ * size. For variable sized events, it will look further ahead into
+ * their length field to see how much data should be read.
+ *
+ * Note this size is *not* final--the neh (Notification/Event Handle)
+ * might specificy an extra size to add.
+ */
+static
+ssize_t uwb_est_get_size(struct uwb_rc *uwb_rc, struct uwb_est *est,
+			 u8 event_low, const struct uwb_rceb *rceb,
+			 size_t rceb_size)
+{
+	unsigned offset;
+	ssize_t size;
+	struct device *dev = &uwb_rc->uwb_dev.dev;
+	const struct uwb_est_entry *entry;
+
+	size = -ENOENT;
+	if (event_low >= est->entries) {	/* in range? */
+		dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u out of range\n",
+			est, est->type_event_high, est->vendor, est->product,
+			est->entries, event_low);
+		goto out;
+	}
+	size = -ENOENT;
+	entry = &est->entry[event_low];
+	if (entry->size == 0 && entry->offset == 0) {	/* unknown? */
+		dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u unknown\n",
+			est, est->type_event_high, est->vendor,	est->product,
+			est->entries, event_low);
+		goto out;
+	}
+	offset = entry->offset;	/* extra fries with that? */
+	if (offset == 0)
+		size = entry->size;
+	else {
+		/* Ops, got an extra size field at 'offset'--read it */
+		const void *ptr = rceb;
+		size_t type_size = 0;
+		offset--;
+		size = -ENOSPC;			/* enough data for more? */
+		switch (entry->type) {
+		case UWB_EST_16:  type_size = sizeof(__le16); break;
+		case UWB_EST_8:   type_size = sizeof(u8);     break;
+		default: 	 BUG();
+		}
+		if (offset + type_size > rceb_size) {
+			dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: "
+				"not enough data to read extra size\n",
+				est, est->type_event_high, est->vendor,
+				est->product, est->entries);
+			goto out;
+		}
+		size = entry->size;
+		ptr += offset;
+		switch (entry->type) {
+		case UWB_EST_16:  size += le16_to_cpu(*(__le16 *)ptr); break;
+		case UWB_EST_8:   size += *(u8 *)ptr;                  break;
+		default: 	 BUG();
+		}
+	}
+out:
+	return size;
+}
+
+
+/**
+ * Guesses the size of a WA event
+ *
+ * @rceb: pointer to the buffer with the event
+ * @rceb_size: size of the area pointed to by @rceb in bytes.
+ * @returns: > 0      Size of the event
+ *	     -ENOSPC  An area big enough was not provided to look
+ *		      ahead into the event's guts and guess the size.
+ *	     -EINVAL  Unknown event code (wEvent).
+ *
+ * This will look at the received RCEB and guess what is the total
+ * size by checking all the tables registered with
+ * uwb_est_register(). For variable sized events, it will look further
+ * ahead into their length field to see how much data should be read.
+ *
+ * Note this size is *not* final--the neh (Notification/Event Handle)
+ * might specificy an extra size to add or replace.
+ */
+ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
+			  size_t rceb_size)
+{
+	/* FIXME: add vendor/product data */
+	ssize_t size;
+	struct device *dev = &rc->uwb_dev.dev;
+	unsigned long flags;
+	unsigned itr;
+	u16 type_event_high, event;
+
+	read_lock_irqsave(&uwb_est_lock, flags);
+	size = -ENOSPC;
+	if (rceb_size < sizeof(*rceb))
+		goto out;
+	event = le16_to_cpu(rceb->wEvent);
+	type_event_high = rceb->bEventType << 8 | (event & 0xff00) >> 8;
+	for (itr = 0; itr < uwb_est_used; itr++) {
+		if (uwb_est[itr].type_event_high != type_event_high)
+			continue;
+		size = uwb_est_get_size(rc, &uwb_est[itr],
+					event & 0x00ff, rceb, rceb_size);
+		/* try more tables that might handle the same type */
+		if (size != -ENOENT)
+			goto out;
+	}
+	dev_dbg(dev,
+		"event 0x%02x/%04x/%02x: no handlers available; RCEB %4ph\n",
+		(unsigned) rceb->bEventType,
+		(unsigned) le16_to_cpu(rceb->wEvent),
+		(unsigned) rceb->bEventContext,
+		rceb);
+	size = -ENOENT;
+out:
+	read_unlock_irqrestore(&uwb_est_lock, flags);
+	return size;
+}
+EXPORT_SYMBOL_GPL(uwb_est_find_size);
diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
new file mode 100644
index 000000000..5d3ba747a
--- /dev/null
+++ b/drivers/uwb/hwa-rc.c
@@ -0,0 +1,946 @@
+/*
+ * WUSB Host Wire Adapter: Radio Control Interface (WUSB[8.6])
+ * Radio Control command/event transport
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Initialize the Radio Control interface Driver.
+ *
+ * For each device probed, creates an 'struct hwarc' which contains
+ * just the representation of the UWB Radio Controller, and the logic
+ * for reading notifications and passing them to the UWB Core.
+ *
+ * So we initialize all of those, register the UWB Radio Controller
+ * and setup the notification/event handle to pipe the notifications
+ * to the UWB management Daemon.
+ *
+ * Command and event filtering.
+ *
+ * This is the driver for the Radio Control Interface described in WUSB
+ * 1.0. The core UWB module assumes that all drivers are compliant to the
+ * WHCI 0.95 specification. We thus create a filter that parses all
+ * incoming messages from the (WUSB 1.0) device and manipulate them to
+ * conform to the WHCI 0.95 specification. Similarly, outgoing messages
+ * are parsed and manipulated to conform to the WUSB 1.0 compliant messages
+ * that the device expects. Only a few messages are affected:
+ * Affected events:
+ *    UWB_RC_EVT_BEACON
+ *    UWB_RC_EVT_BP_SLOT_CHANGE
+ *    UWB_RC_EVT_DRP_AVAIL
+ *    UWB_RC_EVT_DRP
+ * Affected commands:
+ *    UWB_RC_CMD_SCAN
+ *    UWB_RC_CMD_SET_DRP_IE
+ *
+ *
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/wusb.h>
+#include <linux/usb/wusb-wa.h>
+#include <linux/uwb.h>
+
+#include "uwb-internal.h"
+
+/* The device uses commands and events from the WHCI specification, although
+ * reporting itself as WUSB compliant. */
+#define WUSB_QUIRK_WHCI_CMD_EVT		0x01
+
+/**
+ * Descriptor for an instance of the UWB Radio Control Driver that
+ * attaches to the RCI interface of the Host Wired Adapter.
+ *
+ * Unless there is a lock specific to the 'data members', all access
+ * is protected by uwb_rc->mutex.
+ *
+ * The NEEP (Notification/Event EndPoint) URB (@neep_urb) writes to
+ * @rd_buffer. Note there is no locking because it is perfectly (heh!)
+ * serialized--probe() submits an URB, callback is called, processes
+ * the data (synchronously), submits another URB, and so on. There is
+ * no concurrent access to the buffer.
+ */
+struct hwarc {
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_iface;
+	struct uwb_rc *uwb_rc;		/* UWB host controller */
+	struct urb *neep_urb;		/* Notification endpoint handling */
+	struct edc neep_edc;
+	void *rd_buffer;		/* NEEP read buffer */
+};
+
+
+/* Beacon received notification (WUSB 1.0 [8.6.3.2]) */
+struct uwb_rc_evt_beacon_WUSB_0100 {
+	struct uwb_rceb rceb;
+	u8	bChannelNumber;
+	__le16	wBPSTOffset;
+	u8	bLQI;
+	u8	bRSSI;
+	__le16	wBeaconInfoLength;
+	u8	BeaconInfo[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 BEACON RCV notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ *
+ * The WHCI 0.95 spec has a "Beacon Type" field. This value is unknown at
+ * the time we receive the beacon from WUSB so we just set it to
+ * UWB_RC_BEACON_TYPE_NEIGHBOR as a default.
+ * The solution below allocates memory upon receipt of every beacon from a
+ * WUSB device. This will deteriorate performance. What is the right way to
+ * do this?
+ */
+static
+int hwarc_filter_evt_beacon_WUSB_0100(struct uwb_rc *rc,
+				      struct uwb_rceb **header,
+				      const size_t buf_size,
+				      size_t *new_size)
+{
+	struct uwb_rc_evt_beacon_WUSB_0100 *be;
+	struct uwb_rc_evt_beacon *newbe;
+	size_t bytes_left, ielength;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	be = container_of(*header, struct uwb_rc_evt_beacon_WUSB_0100, rceb);
+	bytes_left = buf_size;
+	if (bytes_left < sizeof(*be)) {
+		dev_err(dev, "Beacon Received Notification: Not enough data "
+			"to decode for filtering (%zu vs %zu bytes needed)\n",
+			bytes_left, sizeof(*be));
+		return -EINVAL;
+	}
+	bytes_left -= sizeof(*be);
+	ielength = le16_to_cpu(be->wBeaconInfoLength);
+	if (bytes_left < ielength) {
+		dev_err(dev, "Beacon Received Notification: Not enough data "
+			"to decode IEs (%zu vs %zu bytes needed)\n",
+			bytes_left, ielength);
+		return -EINVAL;
+	}
+	newbe = kzalloc(sizeof(*newbe) + ielength, GFP_ATOMIC);
+	if (newbe == NULL)
+		return -ENOMEM;
+	newbe->rceb = be->rceb;
+	newbe->bChannelNumber = be->bChannelNumber;
+	newbe->bBeaconType = UWB_RC_BEACON_TYPE_NEIGHBOR;
+	newbe->wBPSTOffset = be->wBPSTOffset;
+	newbe->bLQI = be->bLQI;
+	newbe->bRSSI = be->bRSSI;
+	newbe->wBeaconInfoLength = be->wBeaconInfoLength;
+	memcpy(newbe->BeaconInfo, be->BeaconInfo, ielength);
+	*header = &newbe->rceb;
+	*new_size = sizeof(*newbe) + ielength;
+	return 1;  /* calling function will free memory */
+}
+
+
+/* DRP Availability change notification (WUSB 1.0 [8.6.3.8]) */
+struct uwb_rc_evt_drp_avail_WUSB_0100 {
+	struct uwb_rceb rceb;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 DRP AVAILABILITY CHANGE notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ */
+static
+int hwarc_filter_evt_drp_avail_WUSB_0100(struct uwb_rc *rc,
+					 struct uwb_rceb **header,
+					 const size_t buf_size,
+					 size_t *new_size)
+{
+	struct uwb_rc_evt_drp_avail_WUSB_0100 *da;
+	struct uwb_rc_evt_drp_avail *newda;
+	struct uwb_ie_hdr *ie_hdr;
+	size_t bytes_left, ielength;
+	struct device *dev = &rc->uwb_dev.dev;
+
+
+	da = container_of(*header, struct uwb_rc_evt_drp_avail_WUSB_0100, rceb);
+	bytes_left = buf_size;
+	if (bytes_left < sizeof(*da)) {
+		dev_err(dev, "Not enough data to decode DRP Avail "
+			"Notification for filtering. Expected %zu, "
+			"received %zu.\n", (size_t)sizeof(*da), bytes_left);
+		return -EINVAL;
+	}
+	bytes_left -= sizeof(*da);
+	ielength = le16_to_cpu(da->wIELength);
+	if (bytes_left < ielength) {
+		dev_err(dev, "DRP Avail Notification filter: IE length "
+			"[%zu bytes] does not match actual length "
+			"[%zu bytes].\n", ielength, bytes_left);
+		return -EINVAL;
+	}
+	if (ielength < sizeof(*ie_hdr)) {
+		dev_err(dev, "DRP Avail Notification filter: Not enough "
+			"data to decode IE [%zu bytes, %zu needed]\n",
+			ielength, sizeof(*ie_hdr));
+		return -EINVAL;
+	}
+	ie_hdr = (void *) da->IEData;
+	if (ie_hdr->length > 32) {
+		dev_err(dev, "DRP Availability Change event has unexpected "
+			"length for filtering. Expected < 32 bytes, "
+			"got %zu bytes.\n", (size_t)ie_hdr->length);
+		return -EINVAL;
+	}
+	newda = kzalloc(sizeof(*newda), GFP_ATOMIC);
+	if (newda == NULL)
+		return -ENOMEM;
+	newda->rceb = da->rceb;
+	memcpy(newda->bmp, (u8 *) ie_hdr + sizeof(*ie_hdr), ie_hdr->length);
+	*header = &newda->rceb;
+	*new_size = sizeof(*newda);
+	return 1; /* calling function will free memory */
+}
+
+
+/* DRP notification (WUSB 1.0 [8.6.3.9]) */
+struct uwb_rc_evt_drp_WUSB_0100 {
+	struct uwb_rceb rceb;
+	struct uwb_dev_addr wSrcAddr;
+	u8 bExplicit;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 DRP Notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ *
+ * It is hard to manage DRP reservations without having a Reason code.
+ * Unfortunately there is none in the WUSB spec. We just set the default to
+ * DRP IE RECEIVED.
+ * We do not currently use the bBeaconSlotNumber value, so we set this to
+ * zero for now.
+ */
+static
+int hwarc_filter_evt_drp_WUSB_0100(struct uwb_rc *rc,
+				   struct uwb_rceb **header,
+				   const size_t buf_size,
+				   size_t *new_size)
+{
+	struct uwb_rc_evt_drp_WUSB_0100 *drpev;
+	struct uwb_rc_evt_drp *newdrpev;
+	size_t bytes_left, ielength;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	drpev = container_of(*header, struct uwb_rc_evt_drp_WUSB_0100, rceb);
+	bytes_left = buf_size;
+	if (bytes_left < sizeof(*drpev)) {
+		dev_err(dev, "Not enough data to decode DRP Notification "
+			"for filtering. Expected %zu, received %zu.\n",
+			(size_t)sizeof(*drpev), bytes_left);
+		return -EINVAL;
+	}
+	ielength = le16_to_cpu(drpev->wIELength);
+	bytes_left -= sizeof(*drpev);
+	if (bytes_left < ielength) {
+		dev_err(dev, "DRP Notification filter: header length [%zu "
+			"bytes] does not match actual length [%zu "
+			"bytes].\n", ielength, bytes_left);
+		return -EINVAL;
+	}
+	newdrpev = kzalloc(sizeof(*newdrpev) + ielength, GFP_ATOMIC);
+	if (newdrpev == NULL)
+		return -ENOMEM;
+	newdrpev->rceb = drpev->rceb;
+	newdrpev->src_addr = drpev->wSrcAddr;
+	newdrpev->reason = UWB_DRP_NOTIF_DRP_IE_RCVD;
+	newdrpev->beacon_slot_number = 0;
+	newdrpev->ie_length = drpev->wIELength;
+	memcpy(newdrpev->ie_data, drpev->IEData, ielength);
+	*header = &newdrpev->rceb;
+	*new_size = sizeof(*newdrpev) + ielength;
+	return 1; /* calling function will free memory */
+}
+
+
+/* Scan Command (WUSB 1.0 [8.6.2.5]) */
+struct uwb_rc_cmd_scan_WUSB_0100 {
+	struct uwb_rccb rccb;
+	u8 bChannelNumber;
+	u8 bScanState;
+} __attribute__((packed));
+
+/**
+ * Filter WHCI 0.95 SCAN command to be WUSB 1.0 SCAN command
+ *
+ * @header:   command sent to device (compliant to WHCI 0.95)
+ * @size:     size of command sent to device
+ *
+ * We only reduce the size by two bytes because the WUSB 1.0 scan command
+ * does not have the last field (wStarttime). Also, make sure we don't send
+ * the device an unexpected scan type.
+ */
+static
+int hwarc_filter_cmd_scan_WUSB_0100(struct uwb_rc *rc,
+				    struct uwb_rccb **header,
+				    size_t *size)
+{
+	struct uwb_rc_cmd_scan *sc;
+
+	sc = container_of(*header, struct uwb_rc_cmd_scan, rccb);
+
+	if (sc->bScanState == UWB_SCAN_ONLY_STARTTIME)
+		sc->bScanState = UWB_SCAN_ONLY;
+	/* Don't send the last two bytes. */
+	*size -= 2;
+	return 0;
+}
+
+
+/* SET DRP IE command (WUSB 1.0 [8.6.2.7]) */
+struct uwb_rc_cmd_set_drp_ie_WUSB_0100 {
+	struct uwb_rccb rccb;
+	u8 bExplicit;
+	__le16 wIELength;
+	struct uwb_ie_drp IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WHCI 0.95 SET DRP IE command to be WUSB 1.0 SET DRP IE command
+ *
+ * @header:   command sent to device (compliant to WHCI 0.95)
+ * @size:     size of command sent to device
+ *
+ * WUSB has an extra bExplicit field - we assume always explicit
+ * negotiation so this field is set. The command expected by the device is
+ * thus larger than the one prepared by the driver so we need to
+ * reallocate memory to accommodate this.
+ * We trust the driver to send us the correct data so no checking is done
+ * on incoming data - evn though it is variable length.
+ */
+static
+int hwarc_filter_cmd_set_drp_ie_WUSB_0100(struct uwb_rc *rc,
+					  struct uwb_rccb **header,
+					  size_t *size)
+{
+	struct uwb_rc_cmd_set_drp_ie *orgcmd;
+	struct uwb_rc_cmd_set_drp_ie_WUSB_0100 *cmd;
+	size_t ielength;
+
+	orgcmd = container_of(*header, struct uwb_rc_cmd_set_drp_ie, rccb);
+	ielength = le16_to_cpu(orgcmd->wIELength);
+	cmd = kzalloc(sizeof(*cmd) + ielength, GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+	cmd->rccb = orgcmd->rccb;
+	cmd->bExplicit = 0;
+	cmd->wIELength = orgcmd->wIELength;
+	memcpy(cmd->IEData, orgcmd->IEData, ielength);
+	*header = &cmd->rccb;
+	*size = sizeof(*cmd) + ielength;
+	return 1; /* calling function will free memory */
+}
+
+
+/**
+ * Filter data from WHCI driver to WUSB device
+ *
+ * @header: WHCI 0.95 compliant command from driver
+ * @size:   length of command
+ *
+ * The routine managing commands to the device (uwb_rc_cmd()) will call the
+ * filtering function pointer (if it exists) before it passes any data to
+ * the device. At this time the command has been formatted according to
+ * WHCI 0.95 and is ready to be sent to the device.
+ *
+ * The filter function will be provided with the current command and its
+ * length. The function will manipulate the command if necessary and
+ * potentially reallocate memory for a command that needed more memory that
+ * the given command. If new memory was created the function will return 1
+ * to indicate to the calling function that the memory need to be freed
+ * when not needed any more. The size will contain the new length of the
+ * command.
+ * If memory has not been allocated we rely on the original mechanisms to
+ * free the memory of the command - even when we reduce the value of size.
+ */
+static
+int hwarc_filter_cmd_WUSB_0100(struct uwb_rc *rc, struct uwb_rccb **header,
+			       size_t *size)
+{
+	int result;
+	struct uwb_rccb *rccb = *header;
+	int cmd = le16_to_cpu(rccb->wCommand);
+	switch (cmd) {
+	case UWB_RC_CMD_SCAN:
+		result = hwarc_filter_cmd_scan_WUSB_0100(rc, header, size);
+		break;
+	case UWB_RC_CMD_SET_DRP_IE:
+		result = hwarc_filter_cmd_set_drp_ie_WUSB_0100(rc, header, size);
+		break;
+	default:
+		result = -ENOANO;
+		break;
+	}
+	return result;
+}
+
+
+/**
+ * Filter data from WHCI driver to WUSB device
+ *
+ * @header: WHCI 0.95 compliant command from driver
+ * @size:   length of command
+ *
+ * Filter commands based on which protocol the device supports. The WUSB
+ * errata should be the same as WHCI 0.95 so we do not filter that here -
+ * only WUSB 1.0.
+ */
+static
+int hwarc_filter_cmd(struct uwb_rc *rc, struct uwb_rccb **header,
+		     size_t *size)
+{
+	int result = -ENOANO;
+	if (rc->version == 0x0100)
+		result = hwarc_filter_cmd_WUSB_0100(rc, header, size);
+	return result;
+}
+
+
+/**
+ * Compute return value as sum of incoming value and value at given offset
+ *
+ * @rceb:      event for which we compute the size, it contains a variable
+ *	       length field.
+ * @core_size: size of the "non variable" part of the event
+ * @offset:    place in event where the length of the variable part is stored
+ * @buf_size: total length of buffer in which event arrived - we need to make
+ *	       sure we read the offset in memory that is still part of the event
+ */
+static
+ssize_t hwarc_get_event_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
+			     size_t core_size, size_t offset,
+			     const size_t buf_size)
+{
+	ssize_t size = -ENOSPC;
+	const void *ptr = rceb;
+	size_t type_size = sizeof(__le16);
+	struct device *dev = &rc->uwb_dev.dev;
+
+	if (offset + type_size >= buf_size) {
+		dev_err(dev, "Not enough data to read extra size of event "
+			"0x%02x/%04x/%02x, only got %zu bytes.\n",
+			rceb->bEventType, le16_to_cpu(rceb->wEvent),
+			rceb->bEventContext, buf_size);
+		goto out;
+	}
+	ptr += offset;
+	size = core_size + le16_to_cpu(*(__le16 *)ptr);
+out:
+	return size;
+}
+
+
+/* Beacon slot change notification (WUSB 1.0 [8.6.3.5]) */
+struct uwb_rc_evt_bp_slot_change_WUSB_0100 {
+	struct uwb_rceb rceb;
+	u8 bSlotNumber;
+} __attribute__((packed));
+
+
+/**
+ * Filter data from WUSB device to WHCI driver
+ *
+ * @header:	 incoming event
+ * @buf_size:	 size of buffer in which event arrived
+ * @_event_size: actual size of event in the buffer
+ * @new_size:	 size of event after filtered
+ *
+ * We don't know how the buffer is constructed - there may be more than one
+ * event in it so buffer length does not determine event length. We first
+ * determine the expected size of the incoming event. This value is passed
+ * back only if the actual filtering succeeded (so we know the computed
+ * expected size is correct). This value will be zero if
+ * the event did not need any filtering.
+ *
+ * WHCI interprets the BP Slot Change event's data differently than
+ * WUSB. The event sizes are exactly the same. The data field
+ * indicates the new beacon slot in which a RC is transmitting its
+ * beacon. The maximum value of this is 96 (wMacBPLength ECMA-368
+ * 17.16 (Table 117)). We thus know that the WUSB value will not set
+ * the bit bNoSlot, so we don't really do anything (placeholder).
+ */
+static
+int hwarc_filter_event_WUSB_0100(struct uwb_rc *rc, struct uwb_rceb **header,
+				 const size_t buf_size, size_t *_real_size,
+				 size_t *_new_size)
+{
+	int result = -ENOANO;
+	struct uwb_rceb *rceb = *header;
+	int event = le16_to_cpu(rceb->wEvent);
+	ssize_t event_size;
+	size_t core_size, offset;
+
+	if (rceb->bEventType != UWB_RC_CET_GENERAL)
+		goto out;
+	switch (event) {
+	case UWB_RC_EVT_BEACON:
+		core_size = sizeof(struct uwb_rc_evt_beacon_WUSB_0100);
+		offset = offsetof(struct uwb_rc_evt_beacon_WUSB_0100,
+				  wBeaconInfoLength);
+		event_size = hwarc_get_event_size(rc, rceb, core_size,
+						  offset, buf_size);
+		if (event_size < 0)
+			goto out;
+		*_real_size = event_size;
+		result = hwarc_filter_evt_beacon_WUSB_0100(rc, header,
+							   buf_size, _new_size);
+		break;
+	case UWB_RC_EVT_BP_SLOT_CHANGE:
+		*_new_size = *_real_size =
+			sizeof(struct uwb_rc_evt_bp_slot_change_WUSB_0100);
+		result = 0;
+		break;
+
+	case UWB_RC_EVT_DRP_AVAIL:
+		core_size = sizeof(struct uwb_rc_evt_drp_avail_WUSB_0100);
+		offset = offsetof(struct uwb_rc_evt_drp_avail_WUSB_0100,
+				  wIELength);
+		event_size = hwarc_get_event_size(rc, rceb, core_size,
+						  offset, buf_size);
+		if (event_size < 0)
+			goto out;
+		*_real_size = event_size;
+		result = hwarc_filter_evt_drp_avail_WUSB_0100(
+			rc, header, buf_size, _new_size);
+		break;
+
+	case UWB_RC_EVT_DRP:
+		core_size = sizeof(struct uwb_rc_evt_drp_WUSB_0100);
+		offset = offsetof(struct uwb_rc_evt_drp_WUSB_0100, wIELength);
+		event_size = hwarc_get_event_size(rc, rceb, core_size,
+						  offset, buf_size);
+		if (event_size < 0)
+			goto out;
+		*_real_size = event_size;
+		result = hwarc_filter_evt_drp_WUSB_0100(rc, header,
+							buf_size, _new_size);
+		break;
+
+	default:
+		break;
+	}
+out:
+	return result;
+}
+
+/**
+ * Filter data from WUSB device to WHCI driver
+ *
+ * @header:	 incoming event
+ * @buf_size:	 size of buffer in which event arrived
+ * @_event_size: actual size of event in the buffer
+ * @_new_size:	 size of event after filtered
+ *
+ * Filter events based on which protocol the device supports. The WUSB
+ * errata should be the same as WHCI 0.95 so we do not filter that here -
+ * only WUSB 1.0.
+ *
+ * If we don't handle it, we return -ENOANO (why the weird error code?
+ * well, so if I get it, I can pinpoint in the code that raised
+ * it...after all, not too many places use the higher error codes).
+ */
+static
+int hwarc_filter_event(struct uwb_rc *rc, struct uwb_rceb **header,
+		       const size_t buf_size, size_t *_real_size,
+		       size_t *_new_size)
+{
+	int result = -ENOANO;
+	if (rc->version == 0x0100)
+		result =  hwarc_filter_event_WUSB_0100(
+			rc, header, buf_size, _real_size, _new_size);
+	return result;
+}
+
+
+/**
+ * Execute an UWB RC command on HWA
+ *
+ * @rc:	      Instance of a Radio Controller that is a HWA
+ * @cmd:      Buffer containing the RCCB and payload to execute
+ * @cmd_size: Size of the command buffer.
+ *
+ * NOTE: rc's mutex has to be locked
+ */
+static
+int hwarc_cmd(struct uwb_rc *uwb_rc, const struct uwb_rccb *cmd, size_t cmd_size)
+{
+	struct hwarc *hwarc = uwb_rc->priv;
+	return usb_control_msg(
+		hwarc->usb_dev, usb_sndctrlpipe(hwarc->usb_dev, 0),
+		WA_EXEC_RC_CMD, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		0, hwarc->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+		(void *) cmd, cmd_size, 100 /* FIXME: this is totally arbitrary */);
+}
+
+static
+int hwarc_reset(struct uwb_rc *uwb_rc)
+{
+	struct hwarc *hwarc = uwb_rc->priv;
+	int result;
+
+	/* device lock must be held when calling usb_reset_device. */
+	result = usb_lock_device_for_reset(hwarc->usb_dev, NULL);
+	if (result >= 0) {
+		result = usb_reset_device(hwarc->usb_dev);
+		usb_unlock_device(hwarc->usb_dev);
+	}
+
+	return result;
+}
+
+/**
+ * Callback for the notification and event endpoint
+ *
+ * Check's that everything is fine and then passes the read data to
+ * the notification/event handling mechanism (neh).
+ */
+static
+void hwarc_neep_cb(struct urb *urb)
+{
+	struct hwarc *hwarc = urb->context;
+	struct usb_interface *usb_iface = hwarc->usb_iface;
+	struct device *dev = &usb_iface->dev;
+	int result;
+
+	switch (result = urb->status) {
+	case 0:
+		uwb_rc_neh_grok(hwarc->uwb_rc, urb->transfer_buffer,
+				urb->actual_length);
+		break;
+	case -ECONNRESET:	/* Not an error, but a controlled situation; */
+	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
+		goto out;
+	case -ESHUTDOWN:	/* going away! */
+		goto out;
+	default:		/* On general errors, retry unless it gets ugly */
+		if (edc_inc(&hwarc->neep_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME))
+			goto error_exceeded;
+		dev_err(dev, "NEEP: URB error %d\n", urb->status);
+	}
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result < 0 && result != -ENODEV && result != -EPERM) {
+		/* ignoring unrecoverable errors */
+		dev_err(dev, "NEEP: Can't resubmit URB (%d) resetting device\n",
+			result);
+		goto error;
+	}
+out:
+	return;
+
+error_exceeded:
+	dev_err(dev, "NEEP: URB max acceptable errors "
+		"exceeded, resetting device\n");
+error:
+	uwb_rc_neh_error(hwarc->uwb_rc, result);
+	uwb_rc_reset_all(hwarc->uwb_rc);
+	return;
+}
+
+static void hwarc_init(struct hwarc *hwarc)
+{
+	edc_init(&hwarc->neep_edc);
+}
+
+/**
+ * Initialize the notification/event endpoint stuff
+ *
+ * Note this is effectively a parallel thread; it knows that
+ * hwarc->uwb_rc always exists because the existence of a 'hwarc'
+ * means that there is a reverence on the hwarc->uwb_rc (see
+ * _probe()), and thus _neep_cb() can execute safely.
+ */
+static int hwarc_neep_init(struct uwb_rc *rc)
+{
+	struct hwarc *hwarc = rc->priv;
+	struct usb_interface *iface = hwarc->usb_iface;
+	struct usb_device *usb_dev = interface_to_usbdev(iface);
+	struct device *dev = &iface->dev;
+	int result;
+	struct usb_endpoint_descriptor *epd;
+
+	epd = &iface->cur_altsetting->endpoint[0].desc;
+	hwarc->rd_buffer = (void *) __get_free_page(GFP_KERNEL);
+	if (hwarc->rd_buffer == NULL) {
+		dev_err(dev, "Unable to allocate notification's read buffer\n");
+		goto error_rd_buffer;
+	}
+	hwarc->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (hwarc->neep_urb == NULL)
+		goto error_urb_alloc;
+	usb_fill_int_urb(hwarc->neep_urb, usb_dev,
+			 usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
+			 hwarc->rd_buffer, PAGE_SIZE,
+			 hwarc_neep_cb, hwarc, epd->bInterval);
+	result = usb_submit_urb(hwarc->neep_urb, GFP_ATOMIC);
+	if (result < 0) {
+		dev_err(dev, "Cannot submit notification URB: %d\n", result);
+		goto error_neep_submit;
+	}
+	return 0;
+
+error_neep_submit:
+	usb_free_urb(hwarc->neep_urb);
+	hwarc->neep_urb = NULL;
+error_urb_alloc:
+	free_page((unsigned long)hwarc->rd_buffer);
+	hwarc->rd_buffer = NULL;
+error_rd_buffer:
+	return -ENOMEM;
+}
+
+
+/** Clean up all the notification endpoint resources */
+static void hwarc_neep_release(struct uwb_rc *rc)
+{
+	struct hwarc *hwarc = rc->priv;
+
+	usb_kill_urb(hwarc->neep_urb);
+	usb_free_urb(hwarc->neep_urb);
+	hwarc->neep_urb = NULL;
+
+	free_page((unsigned long)hwarc->rd_buffer);
+	hwarc->rd_buffer = NULL;
+}
+
+/**
+ * Get the version from class-specific descriptor
+ *
+ * NOTE: this descriptor comes with the big bundled configuration
+ *	 descriptor that includes the interfaces' and endpoints', so
+ *	 we just look for it in the cached copy kept by the USB stack.
+ *
+ * NOTE2: We convert LE fields to CPU order.
+ */
+static int hwarc_get_version(struct uwb_rc *rc)
+{
+	int result;
+
+	struct hwarc *hwarc = rc->priv;
+	struct uwb_rc_control_intf_class_desc *descr;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct usb_device *usb_dev = hwarc->usb_dev;
+	char *itr;
+	struct usb_descriptor_header *hdr;
+	size_t itr_size, actconfig_idx;
+	u16 version;
+
+	actconfig_idx = (usb_dev->actconfig - usb_dev->config) /
+		sizeof(usb_dev->config[0]);
+	itr = usb_dev->rawdescriptors[actconfig_idx];
+	itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
+	while (itr_size >= sizeof(*hdr)) {
+		hdr = (struct usb_descriptor_header *) itr;
+		dev_dbg(dev, "Extra device descriptor: "
+			"type %02x/%u bytes @ %zu (%zu left)\n",
+			hdr->bDescriptorType, hdr->bLength,
+			(itr - usb_dev->rawdescriptors[actconfig_idx]),
+			itr_size);
+		if (hdr->bDescriptorType == USB_DT_CS_RADIO_CONTROL)
+			goto found;
+		itr += hdr->bLength;
+		itr_size -= hdr->bLength;
+	}
+	dev_err(dev, "cannot find Radio Control Interface Class descriptor\n");
+	return -ENODEV;
+
+found:
+	result = -EINVAL;
+	if (hdr->bLength > itr_size) {	/* is it available? */
+		dev_err(dev, "incomplete Radio Control Interface Class "
+			"descriptor (%zu bytes left, %u needed)\n",
+			itr_size, hdr->bLength);
+		goto error;
+	}
+	if (hdr->bLength < sizeof(*descr)) {
+		dev_err(dev, "short Radio Control Interface Class "
+			"descriptor\n");
+		goto error;
+	}
+	descr = (struct uwb_rc_control_intf_class_desc *) hdr;
+	/* Make LE fields CPU order */
+	version = __le16_to_cpu(descr->bcdRCIVersion);
+	if (version != 0x0100) {
+		dev_err(dev, "Device reports protocol version 0x%04x. We "
+			"do not support that. \n", version);
+		result = -EINVAL;
+		goto error;
+	}
+	rc->version = version;
+	dev_dbg(dev, "Device supports WUSB protocol version 0x%04x \n",	rc->version);
+	result = 0;
+error:
+	return result;
+}
+
+/*
+ * By creating a 'uwb_rc', we have a reference on it -- that reference
+ * is the one we drop when we disconnect.
+ *
+ * No need to switch altsettings; according to WUSB1.0[8.6.1.1], there
+ * is only one altsetting allowed.
+ */
+static int hwarc_probe(struct usb_interface *iface,
+		       const struct usb_device_id *id)
+{
+	int result;
+	struct uwb_rc *uwb_rc;
+	struct hwarc *hwarc;
+	struct device *dev = &iface->dev;
+
+	if (iface->cur_altsetting->desc.bNumEndpoints < 1)
+		return -ENODEV;
+	if (!usb_endpoint_xfer_int(&iface->cur_altsetting->endpoint[0].desc))
+		return -ENODEV;
+
+	result = -ENOMEM;
+	uwb_rc = uwb_rc_alloc();
+	if (uwb_rc == NULL) {
+		dev_err(dev, "unable to allocate RC instance\n");
+		goto error_rc_alloc;
+	}
+	hwarc = kzalloc(sizeof(*hwarc), GFP_KERNEL);
+	if (hwarc == NULL) {
+		dev_err(dev, "unable to allocate HWA RC instance\n");
+		goto error_alloc;
+	}
+	hwarc_init(hwarc);
+	hwarc->usb_dev = usb_get_dev(interface_to_usbdev(iface));
+	hwarc->usb_iface = usb_get_intf(iface);
+	hwarc->uwb_rc = uwb_rc;
+
+	uwb_rc->owner = THIS_MODULE;
+	uwb_rc->start = hwarc_neep_init;
+	uwb_rc->stop  = hwarc_neep_release;
+	uwb_rc->cmd   = hwarc_cmd;
+	uwb_rc->reset = hwarc_reset;
+	if (id->driver_info & WUSB_QUIRK_WHCI_CMD_EVT) {
+		uwb_rc->filter_cmd   = NULL;
+		uwb_rc->filter_event = NULL;
+	} else {
+		uwb_rc->filter_cmd   = hwarc_filter_cmd;
+		uwb_rc->filter_event = hwarc_filter_event;
+	}
+
+	result = uwb_rc_add(uwb_rc, dev, hwarc);
+	if (result < 0)
+		goto error_rc_add;
+	result = hwarc_get_version(uwb_rc);
+	if (result < 0) {
+		dev_err(dev, "cannot retrieve version of RC \n");
+		goto error_get_version;
+	}
+	usb_set_intfdata(iface, hwarc);
+	return 0;
+
+error_get_version:
+	uwb_rc_rm(uwb_rc);
+error_rc_add:
+	usb_put_intf(iface);
+	usb_put_dev(hwarc->usb_dev);
+	kfree(hwarc);
+error_alloc:
+	uwb_rc_put(uwb_rc);
+error_rc_alloc:
+	return result;
+}
+
+static void hwarc_disconnect(struct usb_interface *iface)
+{
+	struct hwarc *hwarc = usb_get_intfdata(iface);
+	struct uwb_rc *uwb_rc = hwarc->uwb_rc;
+
+	usb_set_intfdata(hwarc->usb_iface, NULL);
+	uwb_rc_rm(uwb_rc);
+	usb_put_intf(hwarc->usb_iface);
+	usb_put_dev(hwarc->usb_dev);
+	kfree(hwarc);
+	uwb_rc_put(uwb_rc);	/* when creating the device, refcount = 1 */
+}
+
+static int hwarc_pre_reset(struct usb_interface *iface)
+{
+	struct hwarc *hwarc = usb_get_intfdata(iface);
+	struct uwb_rc *uwb_rc = hwarc->uwb_rc;
+
+	uwb_rc_pre_reset(uwb_rc);
+	return 0;
+}
+
+static int hwarc_post_reset(struct usb_interface *iface)
+{
+	struct hwarc *hwarc = usb_get_intfdata(iface);
+	struct uwb_rc *uwb_rc = hwarc->uwb_rc;
+
+	return uwb_rc_post_reset(uwb_rc);
+}
+
+/** USB device ID's that we handle */
+static const struct usb_device_id hwarc_id_table[] = {
+	/* D-Link DUB-1210 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3d02, 0xe0, 0x01, 0x02),
+	  .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+	/* Intel i1480 (using firmware 1.3PA2-20070828) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x8086, 0x0c3b, 0xe0, 0x01, 0x02),
+	  .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+	/* Alereon 5310 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x01, 0x02),
+	  .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+	/* Alereon 5611 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x01, 0x02),
+	  .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+	/* Generic match for the Radio Control interface */
+	{ USB_INTERFACE_INFO(0xe0, 0x01, 0x02), },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, hwarc_id_table);
+
+static struct usb_driver hwarc_driver = {
+	.name =		"hwa-rc",
+	.id_table =	hwarc_id_table,
+	.probe =	hwarc_probe,
+	.disconnect =	hwarc_disconnect,
+	.pre_reset =    hwarc_pre_reset,
+	.post_reset =   hwarc_post_reset,
+};
+
+module_usb_driver(hwarc_driver);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Host Wireless Adapter Radio Control Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/i1480/Makefile b/drivers/uwb/i1480/Makefile
new file mode 100644
index 000000000..d69da1684
--- /dev/null
+++ b/drivers/uwb/i1480/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_UWB_I1480U)	+= dfu/ i1480-est.o
diff --git a/drivers/uwb/i1480/dfu/Makefile b/drivers/uwb/i1480/dfu/Makefile
new file mode 100644
index 000000000..4739fdac5
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_UWB_I1480U)	+= i1480-dfu-usb.o
+
+i1480-dfu-usb-objs := \
+	dfu.o 	\
+	mac.o	\
+	phy.o	\
+	usb.o
+
+
diff --git a/drivers/uwb/i1480/dfu/dfu.c b/drivers/uwb/i1480/dfu/dfu.c
new file mode 100644
index 000000000..b08d1c2ee
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/dfu.c
@@ -0,0 +1,212 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * Main driver
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Common code for firmware upload used by the USB and PCI version;
+ * i1480_fw_upload() takes a device descriptor and uses the function
+ * pointers it provides to upload firmware and prepare the PHY.
+ *
+ * As well, provides common functions used by the rest of the code.
+ */
+#include "i1480-dfu.h"
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/device.h>
+#include <linux/uwb.h>
+#include <linux/random.h>
+#include <linux/export.h>
+
+/*
+ * i1480_rceb_check - Check RCEB for expected field values
+ * @i1480: pointer to device for which RCEB is being checked
+ * @rceb: RCEB being checked
+ * @cmd: which command the RCEB is related to
+ * @context: expected context
+ * @expected_type: expected event type
+ * @expected_event: expected event
+ *
+ * If @cmd is NULL, do not print error messages, but still return an error
+ * code.
+ *
+ * Return 0 if @rceb matches the expected values, -EINVAL otherwise.
+ */
+int i1480_rceb_check(const struct i1480 *i1480, const struct uwb_rceb *rceb,
+		     const char *cmd, u8 context, u8 expected_type,
+		     unsigned expected_event)
+{
+	int result = 0;
+	struct device *dev = i1480->dev;
+	if (rceb->bEventContext != context) {
+		if (cmd)
+			dev_err(dev, "%s: unexpected context id 0x%02x "
+				"(expected 0x%02x)\n", cmd,
+				rceb->bEventContext, context);
+		result = -EINVAL;
+	}
+	if (rceb->bEventType != expected_type) {
+		if (cmd)
+			dev_err(dev, "%s: unexpected event type 0x%02x "
+				"(expected 0x%02x)\n", cmd,
+				rceb->bEventType, expected_type);
+		result = -EINVAL;
+	}
+	if (le16_to_cpu(rceb->wEvent) != expected_event) {
+		if (cmd)
+			dev_err(dev, "%s: unexpected event 0x%04x "
+				"(expected 0x%04x)\n", cmd,
+				le16_to_cpu(rceb->wEvent), expected_event);
+		result = -EINVAL;
+	}
+	return result;
+}
+EXPORT_SYMBOL_GPL(i1480_rceb_check);
+
+
+/*
+ * Execute a Radio Control Command
+ *
+ * Command data has to be in i1480->cmd_buf.
+ *
+ * @returns size of the reply data filled in i1480->evt_buf or < 0 errno
+ *          code on error.
+ */
+ssize_t i1480_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size,
+		  size_t reply_size)
+{
+	ssize_t result;
+	struct uwb_rceb *reply = i1480->evt_buf;
+	struct uwb_rccb *cmd = i1480->cmd_buf;
+	u16 expected_event = reply->wEvent;
+	u8 expected_type = reply->bEventType;
+	u8 context;
+
+	init_completion(&i1480->evt_complete);
+	i1480->evt_result = -EINPROGRESS;
+	do {
+		get_random_bytes(&context, 1);
+	} while (context == 0x00 || context == 0xff);
+	cmd->bCommandContext = context;
+	result = i1480->cmd(i1480, cmd_name, cmd_size);
+	if (result < 0)
+		goto error;
+	/* wait for the callback to report a event was received */
+	result = wait_for_completion_interruptible_timeout(
+		&i1480->evt_complete, HZ);
+	if (result == 0) {
+		result = -ETIMEDOUT;
+		goto error;
+	}
+	if (result < 0)
+		goto error;
+	result = i1480->evt_result;
+	if (result < 0) {
+		dev_err(i1480->dev, "%s: command reply reception failed: %zd\n",
+			cmd_name, result);
+		goto error;
+	}
+	/*
+	 * Firmware versions >= 1.4.12224 for IOGear GUWA100U generate a
+	 * spurious notification after firmware is downloaded. So check whether
+	 * the receibed RCEB is such notification before assuming that the
+	 * command has failed.
+	 */
+	if (i1480_rceb_check(i1480, i1480->evt_buf, NULL,
+			     0, 0xfd, 0x0022) == 0) {
+		/* Now wait for the actual RCEB for this command. */
+		result = i1480->wait_init_done(i1480);
+		if (result < 0)
+			goto error;
+		result = i1480->evt_result;
+	}
+	if (result != reply_size) {
+		dev_err(i1480->dev, "%s returned only %zu bytes, %zu expected\n",
+			cmd_name, result, reply_size);
+		result = -EINVAL;
+		goto error;
+	}
+	/* Verify we got the right event in response */
+	result = i1480_rceb_check(i1480, i1480->evt_buf, cmd_name, context,
+				  expected_type, expected_event);
+error:
+	return result;
+}
+EXPORT_SYMBOL_GPL(i1480_cmd);
+
+
+static
+int i1480_print_state(struct i1480 *i1480)
+{
+	int result;
+	u32 *buf = (u32 *) i1480->cmd_buf;
+
+	result = i1480->read(i1480, 0x80080000, 2 * sizeof(*buf));
+	if (result < 0) {
+		dev_err(i1480->dev, "cannot read U & L states: %d\n", result);
+		goto error;
+	}
+	dev_info(i1480->dev, "state U 0x%08x, L 0x%08x\n", buf[0], buf[1]);
+error:
+	return result;
+}
+
+
+/*
+ * PCI probe, firmware uploader
+ *
+ * _mac_fw_upload() will call rc_setup(), which needs an rc_release().
+ */
+int i1480_fw_upload(struct i1480 *i1480)
+{
+	int result;
+
+	result = i1480_pre_fw_upload(i1480);	/* PHY pre fw */
+	if (result < 0 && result != -ENOENT) {
+		i1480_print_state(i1480);
+		goto error;
+	}
+	result = i1480_mac_fw_upload(i1480);	/* MAC fw */
+	if (result < 0) {
+		if (result == -ENOENT)
+			dev_err(i1480->dev, "Cannot locate MAC FW file '%s'\n",
+				i1480->mac_fw_name);
+		else
+			i1480_print_state(i1480);
+		goto error;
+	}
+	result = i1480_phy_fw_upload(i1480);	/* PHY fw */
+	if (result < 0 && result != -ENOENT) {
+		i1480_print_state(i1480);
+		goto error_rc_release;
+	}
+	/*
+	 * FIXME: find some reliable way to check whether firmware is running
+	 * properly. Maybe use some standard request that has no side effects?
+	 */
+	dev_info(i1480->dev, "firmware uploaded successfully\n");
+error_rc_release:
+	if (i1480->rc_release)
+		i1480->rc_release(i1480);
+	result = 0;
+error:
+	return result;
+}
+EXPORT_SYMBOL_GPL(i1480_fw_upload);
diff --git a/drivers/uwb/i1480/dfu/i1480-dfu.h b/drivers/uwb/i1480/dfu/i1480-dfu.h
new file mode 100644
index 000000000..46f45e800
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/i1480-dfu.h
@@ -0,0 +1,260 @@
+/*
+ * i1480 Device Firmware Upload
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This driver is the firmware uploader for the Intel Wireless UWB
+ * Link 1480 device (both in the USB and PCI incarnations).
+ *
+ * The process is quite simple: we stop the device, write the firmware
+ * to its memory and then restart it. Wait for the device to let us
+ * know it is done booting firmware. Ready.
+ *
+ * We might have to upload before or after a phy firmware (which might
+ * be done in two methods, using a normal firmware image or through
+ * the MPI port).
+ *
+ * Because USB and PCI use common methods, we just make ops out of the
+ * common operations (read, write, wait_init_done and cmd) and
+ * implement them in usb.c and pci.c.
+ *
+ * The flow is (some parts omitted):
+ *
+ * i1480_{usb,pci}_probe()	  On enumerate/discovery
+ *   i1480_fw_upload()
+ *     i1480_pre_fw_upload()
+ *       __mac_fw_upload()
+ *         fw_hdrs_load()
+ *         mac_fw_hdrs_push()
+ *           i1480->write()       [i1480_{usb,pci}_write()]
+ *           i1480_fw_cmp()
+ *             i1480->read()      [i1480_{usb,pci}_read()]
+ *     i1480_mac_fw_upload()
+ *       __mac_fw_upload()
+ *       i1480->setup(()
+ *       i1480->wait_init_done()
+ *       i1480_cmd_reset()
+ *         i1480->cmd()           [i1480_{usb,pci}_cmd()]
+ *         ...
+ *     i1480_phy_fw_upload()
+ *       request_firmware()
+ *       i1480_mpi_write()
+ *         i1480->cmd()           [i1480_{usb,pci}_cmd()]
+ *
+ * Once the probe function enumerates the device and uploads the
+ * firmware, we just exit with -ENODEV, as we don't really want to
+ * attach to the device.
+ */
+#ifndef __i1480_DFU_H__
+#define __i1480_DFU_H__
+
+#include <linux/uwb/spec.h>
+#include <linux/types.h>
+#include <linux/completion.h>
+
+#define i1480_FW_UPLOAD_MODE_MASK (cpu_to_le32(0x00000018))
+
+#if i1480_FW > 0x00000302
+#define i1480_RCEB_EXTENDED
+#endif
+
+struct uwb_rccb;
+struct uwb_rceb;
+
+/*
+ * Common firmware upload handlers
+ *
+ * Normally you embed this struct in another one specific to your hw.
+ *
+ * @write	Write to device's memory from buffer.
+ * @read	Read from device's memory to i1480->evt_buf.
+ * @setup	Setup device after basic firmware is uploaded
+ * @wait_init_done
+ *              Wait for the device to send a notification saying init
+ *              is done.
+ * @cmd         FOP for issuing the command to the hardware. The
+ *              command data is contained in i1480->cmd_buf and the size
+ *              is supplied as an argument. The command replied is put
+ *              in i1480->evt_buf and the size in i1480->evt_result (or if
+ *              an error, a < 0 errno code).
+ *
+ * @cmd_buf	Memory buffer used to send commands to the device.
+ *              Allocated by the upper layers i1480_fw_upload().
+ *              Size has to be @buf_size.
+ * @evt_buf	Memory buffer used to place the async notifications
+ *              received by the hw. Allocated by the upper layers
+ *              i1480_fw_upload().
+ *              Size has to be @buf_size.
+ * @cmd_complete
+ *              Low level driver uses this to notify code waiting afor
+ *              an event that the event has arrived and data is in
+ *              i1480->evt_buf (and size/result in i1480->evt_result).
+ * @hw_rev
+ *              Use this value to activate dfu code to support new revisions
+ *              of hardware.  i1480_init() sets this to a default value.
+ *              It should be updated by the USB and PCI code.
+ */
+struct i1480 {
+	struct device *dev;
+
+	int (*write)(struct i1480 *, u32 addr, const void *, size_t);
+	int (*read)(struct i1480 *, u32 addr, size_t);
+	int (*rc_setup)(struct i1480 *);
+	void (*rc_release)(struct i1480 *);
+	int (*wait_init_done)(struct i1480 *);
+	int (*cmd)(struct i1480 *, const char *cmd_name, size_t cmd_size);
+	const char *pre_fw_name;
+	const char *mac_fw_name;
+	const char *mac_fw_name_deprecate;	/* FIXME: Will go away */
+	const char *phy_fw_name;
+	u8 hw_rev;
+
+	size_t buf_size;	/* size of both evt_buf and cmd_buf */
+	void *evt_buf, *cmd_buf;
+	ssize_t evt_result;
+	struct completion evt_complete;
+};
+
+static inline
+void i1480_init(struct i1480 *i1480)
+{
+	i1480->hw_rev = 1;
+	init_completion(&i1480->evt_complete);
+}
+
+extern int i1480_fw_upload(struct i1480 *);
+extern int i1480_pre_fw_upload(struct i1480 *);
+extern int i1480_mac_fw_upload(struct i1480 *);
+extern int i1480_phy_fw_upload(struct i1480 *);
+extern ssize_t i1480_cmd(struct i1480 *, const char *, size_t, size_t);
+extern int i1480_rceb_check(const struct i1480 *,
+			    const struct uwb_rceb *, const char *, u8,
+			    u8, unsigned);
+
+enum {
+	/* Vendor specific command type */
+	i1480_CET_VS1 = 		0xfd,
+	/* i1480 commands */
+	i1480_CMD_SET_IP_MAS = 		0x000e,
+	i1480_CMD_GET_MAC_PHY_INFO = 	0x0003,
+	i1480_CMD_MPI_WRITE =		0x000f,
+	i1480_CMD_MPI_READ = 		0x0010,
+	/* i1480 events */
+#if i1480_FW > 0x00000302
+	i1480_EVT_CONFIRM = 		0x0002,
+	i1480_EVT_RM_INIT_DONE = 	0x0101,
+	i1480_EVT_DEV_ADD = 		0x0103,
+	i1480_EVT_DEV_RM = 		0x0104,
+	i1480_EVT_DEV_ID_CHANGE = 	0x0105,
+	i1480_EVT_GET_MAC_PHY_INFO =	i1480_CMD_GET_MAC_PHY_INFO,
+#else
+	i1480_EVT_CONFIRM = 		0x0002,
+	i1480_EVT_RM_INIT_DONE = 	0x0101,
+	i1480_EVT_DEV_ADD = 		0x0103,
+	i1480_EVT_DEV_RM = 		0x0104,
+	i1480_EVT_DEV_ID_CHANGE = 	0x0105,
+	i1480_EVT_GET_MAC_PHY_INFO =	i1480_EVT_CONFIRM,
+#endif
+};
+
+
+struct i1480_evt_confirm {
+	struct uwb_rceb rceb;
+#ifdef i1480_RCEB_EXTENDED
+	__le16 wParamLength;
+#endif
+	u8 bResultCode;
+} __attribute__((packed));
+
+
+struct i1480_rceb {
+	struct uwb_rceb rceb;
+#ifdef i1480_RCEB_EXTENDED
+	__le16 wParamLength;
+#endif
+} __attribute__((packed));
+
+
+/**
+ * Get MAC & PHY Information confirm event structure
+ *
+ * Confirm event returned by the command.
+ */
+struct i1480_evt_confirm_GMPI {
+#if i1480_FW > 0x00000302
+	struct uwb_rceb rceb;
+	__le16 wParamLength;
+	__le16 status;
+	u8 mac_addr[6];		/* EUI-64 bit IEEE address [still 8 bytes?] */
+	u8 dev_addr[2];
+	__le16 mac_fw_rev;	/* major = v >> 8; minor = v & 0xff */
+	u8 hw_rev;
+	u8 phy_vendor;
+	u8 phy_rev;		/* major v = >> 8; minor = v & 0xff */
+	__le16 mac_caps;
+	u8 phy_caps[3];
+	u8 key_stores;
+	__le16 mcast_addr_stores;
+	u8 sec_mode_supported;
+#else
+	struct uwb_rceb rceb;
+	u8 status;
+	u8 mac_addr[8];         /* EUI-64 bit IEEE address [still 8 bytes?] */
+	u8 dev_addr[2];
+	__le16 mac_fw_rev;      /* major = v >> 8; minor = v & 0xff */
+	__le16 phy_fw_rev;      /* major v = >> 8; minor = v & 0xff */
+	__le16 mac_caps;
+	u8 phy_caps;
+	u8 key_stores;
+	__le16 mcast_addr_stores;
+	u8 sec_mode_supported;
+#endif
+} __attribute__((packed));
+
+
+struct i1480_cmd_mpi_write {
+	struct uwb_rccb rccb;
+	__le16 size;
+	u8 data[];
+};
+
+
+struct i1480_cmd_mpi_read {
+	struct uwb_rccb rccb;
+	__le16 size;
+	struct {
+		u8 page, offset;
+	} __attribute__((packed)) data[];
+} __attribute__((packed));
+
+
+struct i1480_evt_mpi_read {
+	struct uwb_rceb rceb;
+#ifdef i1480_RCEB_EXTENDED
+	__le16 wParamLength;
+#endif
+	u8 bResultCode;
+	__le16 size;
+	struct {
+		u8 page, offset, value;
+	} __attribute__((packed)) data[];
+} __attribute__((packed));
+
+
+#endif /* #ifndef __i1480_DFU_H__ */
diff --git a/drivers/uwb/i1480/dfu/mac.c b/drivers/uwb/i1480/dfu/mac.c
new file mode 100644
index 000000000..6ec14f5fc
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/mac.c
@@ -0,0 +1,510 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * MAC Firmware upload implementation
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Implementation of the code for parsing the firmware file (extract
+ * the headers and binary code chunks) in the fw_*() functions. The
+ * code to upload pre and mac firmwares is the same, so it uses a
+ * common entry point in __mac_fw_upload(), which uses the i1480
+ * function pointers to push the firmware to the device.
+ */
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/uwb.h>
+#include "i1480-dfu.h"
+
+/*
+ * Descriptor for a continuous segment of MAC fw data
+ */
+struct fw_hdr {
+	unsigned long address;
+	size_t length;
+	const u32 *bin;
+	struct fw_hdr *next;
+};
+
+
+/* Free a chain of firmware headers */
+static
+void fw_hdrs_free(struct fw_hdr *hdr)
+{
+	struct fw_hdr *next;
+
+	while (hdr) {
+		next = hdr->next;
+		kfree(hdr);
+		hdr = next;
+	}
+}
+
+
+/* Fill a firmware header descriptor from a memory buffer */
+static
+int fw_hdr_load(struct i1480 *i1480, struct fw_hdr *hdr, unsigned hdr_cnt,
+		const char *_data, const u32 *data_itr, const u32 *data_top)
+{
+	size_t hdr_offset =  (const char *) data_itr - _data;
+	size_t remaining_size = (void *) data_top - (void *) data_itr;
+	if (data_itr + 2 > data_top) {
+		dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in header at "
+		       "offset %zu, limit %zu\n",
+		       hdr_cnt, hdr_offset,
+		       (const char *) data_itr + 2 - _data,
+		       (const char *) data_top - _data);
+		return -EINVAL;
+	}
+	hdr->next = NULL;
+	hdr->address = le32_to_cpu(*data_itr++);
+	hdr->length = le32_to_cpu(*data_itr++);
+	hdr->bin = data_itr;
+	if (hdr->length > remaining_size) {
+		dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in data; "
+		       "chunk too long (%zu bytes), only %zu left\n",
+		       hdr_cnt, hdr_offset, hdr->length, remaining_size);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
+/**
+ * Get a buffer where the firmware is supposed to be and create a
+ * chain of headers linking them together.
+ *
+ * @phdr: where to place the pointer to the first header (headers link
+ *        to the next via the @hdr->next ptr); need to free the whole
+ *        chain when done.
+ *
+ * @_data: Pointer to the data buffer.
+ *
+ * @_data_size: Size of the data buffer (bytes); data size has to be a
+ *              multiple of 4. Function will fail if not.
+ *
+ * Goes over the whole binary blob; reads the first chunk and creates
+ * a fw hdr from it (which points to where the data is in @_data and
+ * the length of the chunk); then goes on to the next chunk until
+ * done. Each header is linked to the next.
+ */
+static
+int fw_hdrs_load(struct i1480 *i1480, struct fw_hdr **phdr,
+		 const char *_data, size_t data_size)
+{
+	int result;
+	unsigned hdr_cnt = 0;
+	u32 *data = (u32 *) _data, *data_itr, *data_top;
+	struct fw_hdr *hdr, **prev_hdr = phdr;
+
+	result = -EINVAL;
+	/* Check size is ok and pointer is aligned */
+	if (data_size % sizeof(u32) != 0)
+		goto error;
+	if ((unsigned long) _data % sizeof(u16) != 0)
+		goto error;
+	*phdr = NULL;
+	data_itr = data;
+	data_top = (u32 *) (_data + data_size);
+	while (data_itr < data_top) {
+		result = -ENOMEM;
+		hdr = kmalloc(sizeof(*hdr), GFP_KERNEL);
+		if (hdr == NULL) {
+			dev_err(i1480->dev, "Cannot allocate fw header "
+			       "for chunk #%u\n", hdr_cnt);
+			goto error_alloc;
+		}
+		result = fw_hdr_load(i1480, hdr, hdr_cnt,
+				     _data, data_itr, data_top);
+		if (result < 0)
+			goto error_load;
+		data_itr += 2 + hdr->length;
+		*prev_hdr = hdr;
+		prev_hdr = &hdr->next;
+		hdr_cnt++;
+	};
+	*prev_hdr = NULL;
+	return 0;
+
+error_load:
+	kfree(hdr);
+error_alloc:
+	fw_hdrs_free(*phdr);
+error:
+	return result;
+}
+
+
+/**
+ * Compares a chunk of fw with one in the devices's memory
+ *
+ * @i1480:     Device instance
+ * @hdr:     Pointer to the firmware chunk
+ * @returns: 0 if equal, < 0 errno on error. If > 0, it is the offset
+ *           where the difference was found (plus one).
+ *
+ * Kind of dirty and simplistic, but does the trick in both the PCI
+ * and USB version. We do a quick[er] memcmp(), and if it fails, we do
+ * a byte-by-byte to find the offset.
+ */
+static
+ssize_t i1480_fw_cmp(struct i1480 *i1480, struct fw_hdr *hdr)
+{
+	ssize_t result = 0;
+	u32 src_itr = 0, cnt;
+	size_t size = hdr->length*sizeof(hdr->bin[0]);
+	size_t chunk_size;
+	u8 *bin = (u8 *) hdr->bin;
+
+	while (size > 0) {
+		chunk_size = size < i1480->buf_size ? size : i1480->buf_size;
+		result = i1480->read(i1480, hdr->address + src_itr, chunk_size);
+		if (result < 0) {
+			dev_err(i1480->dev, "error reading for verification: "
+				"%zd\n", result);
+			goto error;
+		}
+		if (memcmp(i1480->cmd_buf, bin + src_itr, result)) {
+			u8 *buf = i1480->cmd_buf;
+			for (cnt = 0; cnt < result; cnt++)
+				if (bin[src_itr + cnt] != buf[cnt]) {
+					dev_err(i1480->dev, "byte failed at "
+						"src_itr %u cnt %u [0x%02x "
+						"vs 0x%02x]\n", src_itr, cnt,
+						bin[src_itr + cnt], buf[cnt]);
+					result = src_itr + cnt + 1;
+					goto cmp_failed;
+				}
+		}
+		src_itr += result;
+		size -= result;
+	}
+	result = 0;
+error:
+cmp_failed:
+	return result;
+}
+
+
+/**
+ * Writes firmware headers to the device.
+ *
+ * @prd:     PRD instance
+ * @hdr:     Processed firmware
+ * @returns: 0 if ok, < 0 errno on error.
+ */
+static
+int mac_fw_hdrs_push(struct i1480 *i1480, struct fw_hdr *hdr,
+		     const char *fw_name, const char *fw_tag)
+{
+	struct device *dev = i1480->dev;
+	ssize_t result = 0;
+	struct fw_hdr *hdr_itr;
+	int verif_retry_count;
+
+	/* Now, header by header, push them to the hw */
+	for (hdr_itr = hdr; hdr_itr != NULL; hdr_itr = hdr_itr->next) {
+		verif_retry_count = 0;
+retry:
+		dev_dbg(dev, "fw chunk (%zu @ 0x%08lx)\n",
+			hdr_itr->length * sizeof(hdr_itr->bin[0]),
+			hdr_itr->address);
+		result = i1480->write(i1480, hdr_itr->address, hdr_itr->bin,
+				    hdr_itr->length*sizeof(hdr_itr->bin[0]));
+		if (result < 0) {
+			dev_err(dev, "%s fw '%s': write failed (%zuB @ 0x%lx):"
+				" %zd\n", fw_tag, fw_name,
+				hdr_itr->length * sizeof(hdr_itr->bin[0]),
+				hdr_itr->address, result);
+			break;
+		}
+		result = i1480_fw_cmp(i1480, hdr_itr);
+		if (result < 0) {
+			dev_err(dev, "%s fw '%s': verification read "
+				"failed (%zuB @ 0x%lx): %zd\n",
+				fw_tag, fw_name,
+				hdr_itr->length * sizeof(hdr_itr->bin[0]),
+				hdr_itr->address, result);
+			break;
+		}
+		if (result > 0) {	/* Offset where it failed + 1 */
+			result--;
+			dev_err(dev, "%s fw '%s': WARNING: verification "
+				"failed at 0x%lx: retrying\n",
+				fw_tag, fw_name, hdr_itr->address + result);
+			if (++verif_retry_count < 3)
+				goto retry;	/* write this block again! */
+			dev_err(dev, "%s fw '%s': verification failed at 0x%lx: "
+				"tried %d times\n", fw_tag, fw_name,
+				hdr_itr->address + result, verif_retry_count);
+			result = -EINVAL;
+			break;
+		}
+	}
+	return result;
+}
+
+
+/** Puts the device in firmware upload mode.*/
+static
+int mac_fw_upload_enable(struct i1480 *i1480)
+{
+	int result;
+	u32 reg = 0x800000c0;
+	u32 *buffer = (u32 *)i1480->cmd_buf;
+
+	if (i1480->hw_rev > 1)
+		reg = 0x8000d0d4;
+	result = i1480->read(i1480, reg, sizeof(u32));
+	if (result < 0)
+		goto error_cmd;
+	*buffer &= ~i1480_FW_UPLOAD_MODE_MASK;
+	result = i1480->write(i1480, reg, buffer, sizeof(u32));
+	if (result < 0)
+		goto error_cmd;
+	return 0;
+error_cmd:
+	dev_err(i1480->dev, "can't enable fw upload mode: %d\n", result);
+	return result;
+}
+
+
+/** Gets the device out of firmware upload mode. */
+static
+int mac_fw_upload_disable(struct i1480 *i1480)
+{
+	int result;
+	u32 reg = 0x800000c0;
+	u32 *buffer = (u32 *)i1480->cmd_buf;
+
+	if (i1480->hw_rev > 1)
+		reg = 0x8000d0d4;
+	result = i1480->read(i1480, reg, sizeof(u32));
+	if (result < 0)
+		goto error_cmd;
+	*buffer |= i1480_FW_UPLOAD_MODE_MASK;
+	result = i1480->write(i1480, reg, buffer, sizeof(u32));
+	if (result < 0)
+		goto error_cmd;
+	return 0;
+error_cmd:
+	dev_err(i1480->dev, "can't disable fw upload mode: %d\n", result);
+	return result;
+}
+
+
+
+/**
+ * Generic function for uploading a MAC firmware.
+ *
+ * @i1480:     Device instance
+ * @fw_name: Name of firmware file to upload.
+ * @fw_tag:  Name of the firmware type (for messages)
+ *           [eg: MAC, PRE]
+ * @do_wait: Wait for device to emit initialization done message (0
+ *           for PRE fws, 1 for MAC fws).
+ * @returns: 0 if ok, < 0 errno on error.
+ */
+static
+int __mac_fw_upload(struct i1480 *i1480, const char *fw_name,
+		    const char *fw_tag)
+{
+	int result;
+	const struct firmware *fw;
+	struct fw_hdr *fw_hdrs;
+
+	result = request_firmware(&fw, fw_name, i1480->dev);
+	if (result < 0)	/* Up to caller to complain on -ENOENT */
+		goto out;
+	result = fw_hdrs_load(i1480, &fw_hdrs, fw->data, fw->size);
+	if (result < 0) {
+		dev_err(i1480->dev, "%s fw '%s': failed to parse firmware "
+			"file: %d\n", fw_tag, fw_name, result);
+		goto out_release;
+	}
+	result = mac_fw_upload_enable(i1480);
+	if (result < 0)
+		goto out_hdrs_release;
+	result = mac_fw_hdrs_push(i1480, fw_hdrs, fw_name, fw_tag);
+	mac_fw_upload_disable(i1480);
+out_hdrs_release:
+	if (result >= 0)
+		dev_info(i1480->dev, "%s fw '%s': uploaded\n", fw_tag, fw_name);
+	else
+		dev_err(i1480->dev, "%s fw '%s': failed to upload (%d), "
+			"power cycle device\n", fw_tag, fw_name, result);
+	fw_hdrs_free(fw_hdrs);
+out_release:
+	release_firmware(fw);
+out:
+	return result;
+}
+
+
+/**
+ * Upload a pre-PHY firmware
+ *
+ */
+int i1480_pre_fw_upload(struct i1480 *i1480)
+{
+	int result;
+	result = __mac_fw_upload(i1480, i1480->pre_fw_name, "PRE");
+	if (result == 0)
+		msleep(400);
+	return result;
+}
+
+
+/**
+ * Reset a the MAC and PHY
+ *
+ * @i1480:     Device's instance
+ * @returns: 0 if ok, < 0 errno code on error
+ *
+ * We put the command on kmalloc'ed memory as some arches cannot do
+ * USB from the stack. The reply event is copied from an stage buffer,
+ * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
+ *
+ * We issue the reset to make sure the UWB controller reinits the PHY;
+ * this way we can now if the PHY init went ok.
+ */
+static
+int i1480_cmd_reset(struct i1480 *i1480)
+{
+	int result;
+	struct uwb_rccb *cmd = (void *) i1480->cmd_buf;
+	struct i1480_evt_reset {
+		struct uwb_rceb rceb;
+		u8 bResultCode;
+	} __attribute__((packed)) *reply = (void *) i1480->evt_buf;
+
+	result = -ENOMEM;
+	cmd->bCommandType = UWB_RC_CET_GENERAL;
+	cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET);
+	reply->rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply->rceb.wEvent = UWB_RC_CMD_RESET;
+	result = i1480_cmd(i1480, "RESET", sizeof(*cmd), sizeof(*reply));
+	if (result < 0)
+		goto out;
+	if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(i1480->dev, "RESET: command execution failed: %u\n",
+			reply->bResultCode);
+		result = -EIO;
+	}
+out:
+	return result;
+
+}
+
+
+/* Wait for the MAC FW to start running */
+static
+int i1480_fw_is_running_q(struct i1480 *i1480)
+{
+	int cnt = 0;
+	int result;
+	u32 *val = (u32 *) i1480->cmd_buf;
+
+	for (cnt = 0; cnt < 10; cnt++) {
+		msleep(100);
+		result = i1480->read(i1480, 0x80080000, 4);
+		if (result < 0) {
+			dev_err(i1480->dev, "Can't read 0x8008000: %d\n", result);
+			goto out;
+		}
+		if (*val == 0x55555555UL)	/* fw running? cool */
+			goto out;
+	}
+	dev_err(i1480->dev, "Timed out waiting for fw to start\n");
+	result = -ETIMEDOUT;
+out:
+	return result;
+
+}
+
+
+/**
+ * Upload MAC firmware, wait for it to start
+ *
+ * @i1480:     Device instance
+ * @fw_name: Name of the file that contains the firmware
+ *
+ * This has to be called after the pre fw has been uploaded (if
+ * there is any).
+ */
+int i1480_mac_fw_upload(struct i1480 *i1480)
+{
+	int result = 0, deprecated_name = 0;
+	struct i1480_rceb *rcebe = (void *) i1480->evt_buf;
+
+	result = __mac_fw_upload(i1480, i1480->mac_fw_name, "MAC");
+	if (result == -ENOENT) {
+		result = __mac_fw_upload(i1480, i1480->mac_fw_name_deprecate,
+					 "MAC");
+		deprecated_name = 1;
+	}
+	if (result < 0)
+		return result;
+	if (deprecated_name == 1)
+		dev_warn(i1480->dev,
+			 "WARNING: firmware file name %s is deprecated, "
+			 "please rename to %s\n",
+			 i1480->mac_fw_name_deprecate, i1480->mac_fw_name);
+	result = i1480_fw_is_running_q(i1480);
+	if (result < 0)
+		goto error_fw_not_running;
+	result = i1480->rc_setup ? i1480->rc_setup(i1480) : 0;
+	if (result < 0) {
+		dev_err(i1480->dev, "Cannot setup after MAC fw upload: %d\n",
+			result);
+		goto error_setup;
+	}
+	result = i1480->wait_init_done(i1480);	/* wait init'on */
+	if (result < 0) {
+		dev_err(i1480->dev, "MAC fw '%s': Initialization timed out "
+			"(%d)\n", i1480->mac_fw_name, result);
+		goto error_init_timeout;
+	}
+	/* verify we got the right initialization done event */
+	if (i1480->evt_result != sizeof(*rcebe)) {
+		dev_err(i1480->dev, "MAC fw '%s': initialization event returns "
+			"wrong size (%zu bytes vs %zu needed)\n",
+			i1480->mac_fw_name, i1480->evt_result, sizeof(*rcebe));
+		goto error_size;
+	}
+	result = -EIO;
+	if (i1480_rceb_check(i1480, &rcebe->rceb, NULL, 0, i1480_CET_VS1,
+			     i1480_EVT_RM_INIT_DONE) < 0) {
+		dev_err(i1480->dev, "wrong initialization event 0x%02x/%04x/%02x "
+			"received; expected 0x%02x/%04x/00\n",
+			rcebe->rceb.bEventType, le16_to_cpu(rcebe->rceb.wEvent),
+			rcebe->rceb.bEventContext, i1480_CET_VS1,
+			i1480_EVT_RM_INIT_DONE);
+		goto error_init_timeout;
+	}
+	result = i1480_cmd_reset(i1480);
+	if (result < 0)
+		dev_err(i1480->dev, "MAC fw '%s': MBOA reset failed (%d)\n",
+			i1480->mac_fw_name, result);
+error_fw_not_running:
+error_init_timeout:
+error_size:
+error_setup:
+	return result;
+}
diff --git a/drivers/uwb/i1480/dfu/phy.c b/drivers/uwb/i1480/dfu/phy.c
new file mode 100644
index 000000000..1ac8526bb
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/phy.c
@@ -0,0 +1,204 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * PHY parameters upload
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Code for uploading the PHY parameters to the PHY through the UWB
+ * Radio Control interface.
+ *
+ * We just send the data through the MPI interface using HWA-like
+ * commands and then reset the PHY to make sure it is ok.
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/usb/wusb.h>
+#include "i1480-dfu.h"
+
+
+/**
+ * Write a value array to an address of the MPI interface
+ *
+ * @i1480:	Device descriptor
+ * @data:	Data array to write
+ * @size:	Size of the data array
+ * @returns:	0 if ok, < 0 errno code on error.
+ *
+ * The data array is organized into pairs:
+ *
+ * ADDRESS VALUE
+ *
+ * ADDRESS is BE 16 bit unsigned, VALUE 8 bit unsigned. Size thus has
+ * to be a multiple of three.
+ */
+static
+int i1480_mpi_write(struct i1480 *i1480, const void *data, size_t size)
+{
+	int result;
+	struct i1480_cmd_mpi_write *cmd = i1480->cmd_buf;
+	struct i1480_evt_confirm *reply = i1480->evt_buf;
+
+	BUG_ON(size > 480);
+	result = -ENOMEM;
+	cmd->rccb.bCommandType = i1480_CET_VS1;
+	cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_WRITE);
+	cmd->size = cpu_to_le16(size);
+	memcpy(cmd->data, data, size);
+	reply->rceb.bEventType = i1480_CET_VS1;
+	reply->rceb.wEvent = i1480_CMD_MPI_WRITE;
+	result = i1480_cmd(i1480, "MPI-WRITE", sizeof(*cmd) + size, sizeof(*reply));
+	if (result < 0)
+		goto out;
+	if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(i1480->dev, "MPI-WRITE: command execution failed: %d\n",
+			reply->bResultCode);
+		result = -EIO;
+	}
+out:
+	return result;
+}
+
+
+/**
+ * Read a value array to from an address of the MPI interface
+ *
+ * @i1480:	Device descriptor
+ * @data:	where to place the read array
+ * @srcaddr:	Where to read from
+ * @size:	Size of the data read array
+ * @returns:	0 if ok, < 0 errno code on error.
+ *
+ * The command data array is organized into pairs ADDR0 ADDR1..., and
+ * the returned data in ADDR0 VALUE0 ADDR1 VALUE1...
+ *
+ * We generate the command array to be a sequential read and then
+ * rearrange the result.
+ *
+ * We use the i1480->cmd_buf for the command, i1480->evt_buf for the reply.
+ *
+ * As the reply has to fit in 512 bytes (i1480->evt_buffer), the max amount
+ * of values we can read is (512 - sizeof(*reply)) / 3
+ */
+static
+int i1480_mpi_read(struct i1480 *i1480, u8 *data, u16 srcaddr, size_t size)
+{
+	int result;
+	struct i1480_cmd_mpi_read *cmd = i1480->cmd_buf;
+	struct i1480_evt_mpi_read *reply = i1480->evt_buf;
+	unsigned cnt;
+
+	memset(i1480->cmd_buf, 0x69, 512);
+	memset(i1480->evt_buf, 0x69, 512);
+
+	BUG_ON(size > (i1480->buf_size - sizeof(*reply)) / 3);
+	result = -ENOMEM;
+	cmd->rccb.bCommandType = i1480_CET_VS1;
+	cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_READ);
+	cmd->size = cpu_to_le16(3*size);
+	for (cnt = 0; cnt < size; cnt++) {
+		cmd->data[cnt].page = (srcaddr + cnt) >> 8;
+		cmd->data[cnt].offset = (srcaddr + cnt) & 0xff;
+	}
+	reply->rceb.bEventType = i1480_CET_VS1;
+	reply->rceb.wEvent = i1480_CMD_MPI_READ;
+	result = i1480_cmd(i1480, "MPI-READ", sizeof(*cmd) + 2*size,
+			sizeof(*reply) + 3*size);
+	if (result < 0)
+		goto out;
+	if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(i1480->dev, "MPI-READ: command execution failed: %d\n",
+			reply->bResultCode);
+		result = -EIO;
+		goto out;
+	}
+	for (cnt = 0; cnt < size; cnt++) {
+		if (reply->data[cnt].page != (srcaddr + cnt) >> 8)
+			dev_err(i1480->dev, "MPI-READ: page inconsistency at "
+				"index %u: expected 0x%02x, got 0x%02x\n", cnt,
+				(srcaddr + cnt) >> 8, reply->data[cnt].page);
+		if (reply->data[cnt].offset != ((srcaddr + cnt) & 0x00ff))
+			dev_err(i1480->dev, "MPI-READ: offset inconsistency at "
+				"index %u: expected 0x%02x, got 0x%02x\n", cnt,
+				(srcaddr + cnt) & 0x00ff,
+				reply->data[cnt].offset);
+		data[cnt] = reply->data[cnt].value;
+	}
+	result = 0;
+out:
+	return result;
+}
+
+
+/**
+ * Upload a PHY firmware, wait for it to start
+ *
+ * @i1480:     Device instance
+ * @fw_name: Name of the file that contains the firmware
+ *
+ * We assume the MAC fw is up and running. This means we can use the
+ * MPI interface to write the PHY firmware. Once done, we issue an
+ * MBOA Reset, which will force the MAC to reset and reinitialize the
+ * PHY. If that works, we are ready to go.
+ *
+ * Max packet size for the MPI write is 512, so the max buffer is 480
+ * (which gives us 160 byte triads of MSB, LSB and VAL for the data).
+ */
+int i1480_phy_fw_upload(struct i1480 *i1480)
+{
+	int result;
+	const struct firmware *fw;
+	const char *data_itr, *data_top;
+	const size_t MAX_BLK_SIZE = 480;	/* 160 triads */
+	size_t data_size;
+	u8 phy_stat;
+
+	result = request_firmware(&fw, i1480->phy_fw_name, i1480->dev);
+	if (result < 0)
+		goto out;
+	/* Loop writing data in chunks as big as possible until done. */
+	for (data_itr = fw->data, data_top = data_itr + fw->size;
+	     data_itr < data_top; data_itr += MAX_BLK_SIZE) {
+		data_size = min(MAX_BLK_SIZE, (size_t) (data_top - data_itr));
+		result = i1480_mpi_write(i1480, data_itr, data_size);
+		if (result < 0)
+			goto error_mpi_write;
+	}
+	/* Read MPI page 0, offset 6; if 0, PHY was initialized correctly. */
+	result = i1480_mpi_read(i1480, &phy_stat, 0x0006, 1);
+	if (result < 0) {
+		dev_err(i1480->dev, "PHY: can't get status: %d\n", result);
+		goto error_mpi_status;
+	}
+	if (phy_stat != 0) {
+		result = -ENODEV;
+		dev_info(i1480->dev, "error, PHY not ready: %u\n", phy_stat);
+		goto error_phy_status;
+	}
+	dev_info(i1480->dev, "PHY fw '%s': uploaded\n", i1480->phy_fw_name);
+error_phy_status:
+error_mpi_status:
+error_mpi_write:
+	release_firmware(fw);
+	if (result < 0)
+		dev_err(i1480->dev, "PHY fw '%s': failed to upload (%d), "
+			"power cycle device\n", i1480->phy_fw_name, result);
+out:
+	return result;
+}
diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c
new file mode 100644
index 000000000..c0430a41e
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/usb.c
@@ -0,0 +1,462 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * USB SKU firmware upload implementation
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This driver will prepare the i1480 device to behave as a real
+ * Wireless USB HWA adaptor by uploading the firmware.
+ *
+ * When the device is connected or driver is loaded, i1480_usb_probe()
+ * is called--this will allocate and initialize the device structure,
+ * fill in the pointers to the common functions (read, write,
+ * wait_init_done and cmd for HWA command execution) and once that is
+ * done, call the common firmware uploading routine. Then clean up and
+ * return -ENODEV, as we don't attach to the device.
+ *
+ * The rest are the basic ops we implement that the fw upload code
+ * uses to do its job. All the ops in the common code are i1480->NAME,
+ * the functions are i1480_usb_NAME().
+ */
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/uwb.h>
+#include <linux/usb/wusb.h>
+#include <linux/usb/wusb-wa.h>
+#include "i1480-dfu.h"
+
+struct i1480_usb {
+	struct i1480 i1480;
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_iface;
+	struct urb *neep_urb;	/* URB for reading from EP1 */
+};
+
+
+static
+void i1480_usb_init(struct i1480_usb *i1480_usb)
+{
+	i1480_init(&i1480_usb->i1480);
+}
+
+
+static
+int i1480_usb_create(struct i1480_usb *i1480_usb, struct usb_interface *iface)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(iface);
+	int result = -ENOMEM;
+
+	i1480_usb->usb_dev = usb_get_dev(usb_dev);	/* bind the USB device */
+	i1480_usb->usb_iface = usb_get_intf(iface);
+	usb_set_intfdata(iface, i1480_usb);		/* Bind the driver to iface0 */
+	i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (i1480_usb->neep_urb == NULL)
+		goto error;
+	return 0;
+
+error:
+	usb_set_intfdata(iface, NULL);
+	usb_put_intf(iface);
+	usb_put_dev(usb_dev);
+	return result;
+}
+
+
+static
+void i1480_usb_destroy(struct i1480_usb *i1480_usb)
+{
+	usb_kill_urb(i1480_usb->neep_urb);
+	usb_free_urb(i1480_usb->neep_urb);
+	usb_set_intfdata(i1480_usb->usb_iface, NULL);
+	usb_put_intf(i1480_usb->usb_iface);
+	usb_put_dev(i1480_usb->usb_dev);
+}
+
+
+/**
+ * Write a buffer to a memory address in the i1480 device
+ *
+ * @i1480:  i1480 instance
+ * @memory_address:
+ *          Address where to write the data buffer to.
+ * @buffer: Buffer to the data
+ * @size:   Size of the buffer [has to be < 512].
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * Data buffers to USB cannot be on the stack or in vmalloc'ed areas,
+ * so we copy it to the local i1480 buffer before proceeding. In any
+ * case, we have a max size we can send.
+ */
+static
+int i1480_usb_write(struct i1480 *i1480, u32 memory_address,
+		    const void *buffer, size_t size)
+{
+	int result = 0;
+	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+	size_t buffer_size, itr = 0;
+
+	BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
+	while (size > 0) {
+		buffer_size = size < i1480->buf_size ? size : i1480->buf_size;
+		memcpy(i1480->cmd_buf, buffer + itr, buffer_size);
+		result = usb_control_msg(
+			i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
+			0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			memory_address,	(memory_address >> 16),
+			i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */);
+		if (result < 0)
+			break;
+		itr += result;
+		memory_address += result;
+		size -= result;
+	}
+	return result;
+}
+
+
+/**
+ * Read a block [max size 512] of the device's memory to @i1480's buffer.
+ *
+ * @i1480: i1480 instance
+ * @memory_address:
+ *         Address where to read from.
+ * @size:  Size to read. Smaller than or equal to 512.
+ * @returns: >= 0 number of bytes written if ok, < 0 errno code on error.
+ *
+ * NOTE: if the memory address or block is incorrect, you might get a
+ *       stall or a different memory read. Caller has to verify the
+ *       memory address and size passed back in the @neh structure.
+ */
+static
+int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size)
+{
+	ssize_t result = 0, bytes = 0;
+	size_t itr, read_size = i1480->buf_size;
+	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+
+	BUG_ON(size > i1480->buf_size);
+	BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
+	BUG_ON(read_size > 512);
+
+	if (addr >= 0x8000d200 && addr < 0x8000d400)	/* Yeah, HW quirk */
+		read_size = 4;
+
+	for (itr = 0; itr < size; itr += read_size) {
+		size_t itr_addr = addr + itr;
+		size_t itr_size = min(read_size, size - itr);
+		result = usb_control_msg(
+			i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0),
+			0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			itr_addr, (itr_addr >> 16),
+			i1480->cmd_buf + itr, itr_size,
+			100 /* FIXME: arbitrary */);
+		if (result < 0) {
+			dev_err(i1480->dev, "%s: USB read error: %zd\n",
+				__func__, result);
+			goto out;
+		}
+		if (result != itr_size) {
+			result = -EIO;
+			dev_err(i1480->dev,
+				"%s: partial read got only %zu bytes vs %zu expected\n",
+				__func__, result, itr_size);
+			goto out;
+		}
+		bytes += result;
+	}
+	result = bytes;
+out:
+	return result;
+}
+
+
+/**
+ * Callback for reads on the notification/event endpoint
+ *
+ * Just enables the completion read handler.
+ */
+static
+void i1480_usb_neep_cb(struct urb *urb)
+{
+	struct i1480 *i1480 = urb->context;
+	struct device *dev = i1480->dev;
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -ECONNRESET:	/* Not an error, but a controlled situation; */
+	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
+		dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status);
+		break;
+	case -ESHUTDOWN:	/* going away! */
+		dev_dbg(dev, "NEEP: down %d\n", urb->status);
+		break;
+	default:
+		dev_err(dev, "NEEP: unknown status %d\n", urb->status);
+		break;
+	}
+	i1480->evt_result = urb->actual_length;
+	complete(&i1480->evt_complete);
+	return;
+}
+
+
+/**
+ * Wait for the MAC FW to initialize
+ *
+ * MAC FW sends a 0xfd/0101/00 notification to EP1 when done
+ * initializing. Get that notification into i1480->evt_buf; upper layer
+ * will verify it.
+ *
+ * Set i1480->evt_result with the result of getting the event or its
+ * size (if successful).
+ *
+ * Delivers the data directly to i1480->evt_buf
+ */
+static
+int i1480_usb_wait_init_done(struct i1480 *i1480)
+{
+	int result;
+	struct device *dev = i1480->dev;
+	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+	struct usb_endpoint_descriptor *epd;
+
+	init_completion(&i1480->evt_complete);
+	i1480->evt_result = -EINPROGRESS;
+	epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
+	usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev,
+			 usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
+			 i1480->evt_buf, i1480->buf_size,
+			 i1480_usb_neep_cb, i1480, epd->bInterval);
+	result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
+	if (result < 0) {
+		dev_err(dev, "init done: cannot submit NEEP read: %d\n",
+			result);
+		goto error_submit;
+	}
+	/* Wait for the USB callback to get the data */
+	result = wait_for_completion_interruptible_timeout(
+		&i1480->evt_complete, HZ);
+	if (result <= 0) {
+		result = result == 0 ? -ETIMEDOUT : result;
+		goto error_wait;
+	}
+	usb_kill_urb(i1480_usb->neep_urb);
+	return 0;
+
+error_wait:
+	usb_kill_urb(i1480_usb->neep_urb);
+error_submit:
+	i1480->evt_result = result;
+	return result;
+}
+
+
+/**
+ * Generic function for issuing commands to the i1480
+ *
+ * @i1480:      i1480 instance
+ * @cmd_name:   Name of the command (for error messages)
+ * @cmd:        Pointer to command buffer
+ * @cmd_size:   Size of the command buffer
+ * @reply:      Buffer for the reply event
+ * @reply_size: Expected size back (including RCEB); the reply buffer
+ *              is assumed to be as big as this.
+ * @returns:    >= 0 size of the returned event data if ok,
+ *              < 0 errno code on error.
+ *
+ * Arms the NE handle, issues the command to the device and checks the
+ * basics of the reply event.
+ */
+static
+int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size)
+{
+	int result;
+	struct device *dev = i1480->dev;
+	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+	struct usb_endpoint_descriptor *epd;
+	struct uwb_rccb *cmd = i1480->cmd_buf;
+	u8 iface_no;
+
+	/* Post a read on the notification & event endpoint */
+	iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+	epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
+	usb_fill_int_urb(
+		i1480_usb->neep_urb, i1480_usb->usb_dev,
+		usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
+		i1480->evt_buf, i1480->buf_size,
+		i1480_usb_neep_cb, i1480, epd->bInterval);
+	result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
+	if (result < 0) {
+		dev_err(dev, "%s: cannot submit NEEP read: %d\n",
+			cmd_name, result);
+			goto error_submit_ep1;
+	}
+	/* Now post the command on EP0 */
+	result = usb_control_msg(
+		i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
+		WA_EXEC_RC_CMD,
+		USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
+		0, iface_no,
+		cmd, cmd_size,
+		100 /* FIXME: this is totally arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "%s: control request failed: %d\n",
+			cmd_name, result);
+		goto error_submit_ep0;
+	}
+	return result;
+
+error_submit_ep0:
+	usb_kill_urb(i1480_usb->neep_urb);
+error_submit_ep1:
+	return result;
+}
+
+
+/*
+ * Probe a i1480 device for uploading firmware.
+ *
+ * We attach only to interface #0, which is the radio control interface.
+ */
+static
+int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(iface);
+	struct i1480_usb *i1480_usb;
+	struct i1480 *i1480;
+	struct device *dev = &iface->dev;
+	int result;
+
+	result = -ENODEV;
+	if (iface->cur_altsetting->desc.bInterfaceNumber != 0) {
+		dev_dbg(dev, "not attaching to iface %d\n",
+			iface->cur_altsetting->desc.bInterfaceNumber);
+		goto error;
+	}
+	if (iface->num_altsetting > 1 &&
+			le16_to_cpu(udev->descriptor.idProduct) == 0xbabe) {
+		/* Need altsetting #1 [HW QUIRK] or EP1 won't work */
+		result = usb_set_interface(interface_to_usbdev(iface), 0, 1);
+		if (result < 0)
+			dev_warn(dev,
+				 "can't set altsetting 1 on iface 0: %d\n",
+				 result);
+	}
+
+	if (iface->cur_altsetting->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
+	result = -ENOMEM;
+	i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL);
+	if (i1480_usb == NULL) {
+		dev_err(dev, "Unable to allocate instance\n");
+		goto error;
+	}
+	i1480_usb_init(i1480_usb);
+
+	i1480 = &i1480_usb->i1480;
+	i1480->buf_size = 512;
+	i1480->cmd_buf = kmalloc_array(2, i1480->buf_size, GFP_KERNEL);
+	if (i1480->cmd_buf == NULL) {
+		dev_err(dev, "Cannot allocate transfer buffers\n");
+		result = -ENOMEM;
+		goto error_buf_alloc;
+	}
+	i1480->evt_buf = i1480->cmd_buf + i1480->buf_size;
+
+	result = i1480_usb_create(i1480_usb, iface);
+	if (result < 0) {
+		dev_err(dev, "Cannot create instance: %d\n", result);
+		goto error_create;
+	}
+
+	/* setup the fops and upload the firmware */
+	i1480->pre_fw_name = "i1480-pre-phy-0.0.bin";
+	i1480->mac_fw_name = "i1480-usb-0.0.bin";
+	i1480->mac_fw_name_deprecate = "ptc-0.0.bin";
+	i1480->phy_fw_name = "i1480-phy-0.0.bin";
+	i1480->dev = &iface->dev;
+	i1480->write = i1480_usb_write;
+	i1480->read = i1480_usb_read;
+	i1480->rc_setup = NULL;
+	i1480->wait_init_done = i1480_usb_wait_init_done;
+	i1480->cmd = i1480_usb_cmd;
+
+	result = i1480_fw_upload(&i1480_usb->i1480);	/* the real thing */
+	if (result >= 0) {
+		usb_reset_device(i1480_usb->usb_dev);
+		result = -ENODEV;	/* we don't want to bind to the iface */
+	}
+	i1480_usb_destroy(i1480_usb);
+error_create:
+	kfree(i1480->cmd_buf);
+error_buf_alloc:
+	kfree(i1480_usb);
+error:
+	return result;
+}
+
+MODULE_FIRMWARE("i1480-pre-phy-0.0.bin");
+MODULE_FIRMWARE("i1480-usb-0.0.bin");
+MODULE_FIRMWARE("i1480-phy-0.0.bin");
+
+#define i1480_USB_DEV(v, p)				\
+{							\
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE	\
+		 | USB_DEVICE_ID_MATCH_DEV_INFO		\
+		 | USB_DEVICE_ID_MATCH_INT_INFO,	\
+	.idVendor = (v),				\
+	.idProduct = (p),				\
+	.bDeviceClass = 0xff,				\
+	.bDeviceSubClass = 0xff,			\
+	.bDeviceProtocol = 0xff,			\
+	.bInterfaceClass = 0xff,			\
+	.bInterfaceSubClass = 0xff,			\
+	.bInterfaceProtocol = 0xff,			\
+}
+
+
+/** USB device ID's that we handle */
+static const struct usb_device_id i1480_usb_id_table[] = {
+	i1480_USB_DEV(0x8086, 0xdf3b),
+	i1480_USB_DEV(0x15a9, 0x0005),
+	i1480_USB_DEV(0x07d1, 0x3802),
+	i1480_USB_DEV(0x050d, 0x305a),
+	i1480_USB_DEV(0x3495, 0x3007),
+	{},
+};
+MODULE_DEVICE_TABLE(usb, i1480_usb_id_table);
+
+
+static struct usb_driver i1480_dfu_driver = {
+	.name =		"i1480-dfu-usb",
+	.id_table =	i1480_usb_id_table,
+	.probe =	i1480_usb_probe,
+	.disconnect =	NULL,
+};
+
+module_usb_driver(i1480_dfu_driver);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c
new file mode 100644
index 000000000..d5de5e131
--- /dev/null
+++ b/drivers/uwb/i1480/i1480-est.c
@@ -0,0 +1,99 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * Event Size tables for Wired Adaptors
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/uwb.h>
+#include "dfu/i1480-dfu.h"
+
+
+/** Event size table for wEvents 0x00XX */
+static struct uwb_est_entry i1480_est_fd00[] = {
+	/* Anybody expecting this response has to use
+	 * neh->extra_size to specify the real size that will
+	 * come back. */
+	[i1480_EVT_CONFIRM] = { .size = sizeof(struct i1480_evt_confirm) },
+	[i1480_CMD_SET_IP_MAS] = { .size = sizeof(struct i1480_evt_confirm) },
+#ifdef i1480_RCEB_EXTENDED
+	[0x09] = {
+		.size = sizeof(struct i1480_rceb),
+		.offset = 1 + offsetof(struct i1480_rceb, wParamLength),
+	},
+#endif
+};
+
+/** Event size table for wEvents 0x01XX */
+static struct uwb_est_entry i1480_est_fd01[] = {
+	[0xff & i1480_EVT_RM_INIT_DONE] = { .size = sizeof(struct i1480_rceb) },
+	[0xff & i1480_EVT_DEV_ADD] = { .size = sizeof(struct i1480_rceb) + 9 },
+	[0xff & i1480_EVT_DEV_RM] = { .size = sizeof(struct i1480_rceb) + 9 },
+	[0xff & i1480_EVT_DEV_ID_CHANGE] = {
+		.size = sizeof(struct i1480_rceb) + 2 },
+};
+
+static int __init i1480_est_init(void)
+{
+	int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
+				      i1480_est_fd00,
+				      ARRAY_SIZE(i1480_est_fd00));
+	if (result < 0) {
+		printk(KERN_ERR "Can't register EST table fd00: %d\n", result);
+		return result;
+	}
+	result = uwb_est_register(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b,
+				  i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01));
+	if (result < 0) {
+		printk(KERN_ERR "Can't register EST table fd01: %d\n", result);
+		return result;
+	}
+	return 0;
+}
+module_init(i1480_est_init);
+
+static void __exit i1480_est_exit(void)
+{
+	uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
+			   i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00));
+	uwb_est_unregister(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b,
+			   i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01));
+}
+module_exit(i1480_est_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("i1480's Vendor Specific Event Size Tables");
+MODULE_LICENSE("GPL");
+
+/**
+ * USB device ID's that we handle
+ *
+ * [so we are loaded when this kind device is connected]
+ */
+static struct usb_device_id __used i1480_est_id_table[] = {
+	{ USB_DEVICE(0x8086, 0xdf3b), },
+	{ USB_DEVICE(0x8086, 0x0c3b), },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, i1480_est_id_table);
diff --git a/drivers/uwb/ie-rcv.c b/drivers/uwb/ie-rcv.c
new file mode 100644
index 000000000..5fac5744a
--- /dev/null
+++ b/drivers/uwb/ie-rcv.c
@@ -0,0 +1,53 @@
+/*
+ * Ultra Wide Band
+ * IE Received notification handling.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/bitmap.h>
+#include "uwb-internal.h"
+
+/*
+ * Process an incoming IE Received notification.
+ */
+int uwbd_evt_handle_rc_ie_rcv(struct uwb_event *evt)
+{
+	int result = -EINVAL;
+	struct device *dev = &evt->rc->uwb_dev.dev;
+	struct uwb_rc_evt_ie_rcv *iercv;
+
+	/* Is there enough data to decode it? */
+	if (evt->notif.size < sizeof(*iercv)) {
+		dev_err(dev, "IE Received notification: Not enough data to "
+			"decode (%zu vs %zu bytes needed)\n",
+			evt->notif.size, sizeof(*iercv));
+		goto error;
+	}
+	iercv = container_of(evt->notif.rceb, struct uwb_rc_evt_ie_rcv, rceb);
+
+	dev_dbg(dev, "IE received, element ID=%d\n", iercv->IEData[0]);
+
+	if (iercv->IEData[0] == UWB_RELINQUISH_REQUEST_IE) {
+		dev_warn(dev, "unhandled Relinquish Request IE\n");
+	}
+
+	return 0;
+error:
+	return result;
+}
diff --git a/drivers/uwb/ie.c b/drivers/uwb/ie.c
new file mode 100644
index 000000000..902b0f2f9
--- /dev/null
+++ b/drivers/uwb/ie.c
@@ -0,0 +1,380 @@
+/*
+ * Ultra Wide Band
+ * Information Element Handling
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ * Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/slab.h>
+#include <linux/export.h>
+#include "uwb-internal.h"
+
+/**
+ * uwb_ie_next - get the next IE in a buffer
+ * @ptr: start of the buffer containing the IE data
+ * @len: length of the buffer
+ *
+ * Both @ptr and @len are updated so subsequent calls to uwb_ie_next()
+ * will get the next IE.
+ *
+ * NULL is returned (and @ptr and @len will not be updated) if there
+ * are no more IEs in the buffer or the buffer is too short.
+ */
+struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len)
+{
+	struct uwb_ie_hdr *hdr;
+	size_t ie_len;
+
+	if (*len < sizeof(struct uwb_ie_hdr))
+		return NULL;
+
+	hdr = *ptr;
+	ie_len = sizeof(struct uwb_ie_hdr) + hdr->length;
+
+	if (*len < ie_len)
+		return NULL;
+
+	*ptr += ie_len;
+	*len -= ie_len;
+
+	return hdr;
+}
+EXPORT_SYMBOL_GPL(uwb_ie_next);
+
+/**
+ * uwb_ie_dump_hex - print IEs to a character buffer
+ * @ies: the IEs to print.
+ * @len: length of all the IEs.
+ * @buf: the destination buffer.
+ * @size: size of @buf.
+ *
+ * Returns the number of characters written.
+ */
+int uwb_ie_dump_hex(const struct uwb_ie_hdr *ies, size_t len,
+		    char *buf, size_t size)
+{
+	void *ptr;
+	const struct uwb_ie_hdr *ie;
+	int r = 0;
+	u8 *d;
+
+	ptr = (void *)ies;
+	for (;;) {
+		ie = uwb_ie_next(&ptr, &len);
+		if (!ie)
+			break;
+
+		r += scnprintf(buf + r, size - r, "%02x %02x",
+			       (unsigned)ie->element_id,
+			       (unsigned)ie->length);
+		d = (uint8_t *)ie + sizeof(struct uwb_ie_hdr);
+		while (d != ptr && r < size)
+			r += scnprintf(buf + r, size - r, " %02x", (unsigned)*d++);
+		if (r < size)
+			buf[r++] = '\n';
+	};
+
+	return r;
+}
+
+/**
+ * Get the IEs that a radio controller is sending in its beacon
+ *
+ * @uwb_rc:  UWB Radio Controller
+ * @returns: Size read from the system
+ *
+ * We don't need to lock the uwb_rc's mutex because we don't modify
+ * anything. Once done with the iedata buffer, call
+ * uwb_rc_ie_release(iedata). Don't call kfree on it.
+ */
+static
+ssize_t uwb_rc_get_ie(struct uwb_rc *uwb_rc, struct uwb_rc_evt_get_ie **pget_ie)
+{
+	ssize_t result;
+	struct device *dev = &uwb_rc->uwb_dev.dev;
+	struct uwb_rccb *cmd = NULL;
+	struct uwb_rceb *reply = NULL;
+	struct uwb_rc_evt_get_ie *get_ie;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->bCommandType = UWB_RC_CET_GENERAL;
+	cmd->wCommand = cpu_to_le16(UWB_RC_CMD_GET_IE);
+	result = uwb_rc_vcmd(uwb_rc, "GET_IE", cmd, sizeof(*cmd),
+			     UWB_RC_CET_GENERAL, UWB_RC_CMD_GET_IE,
+			     &reply);
+	kfree(cmd);
+	if (result < 0)
+		return result;
+
+	get_ie = container_of(reply, struct uwb_rc_evt_get_ie, rceb);
+	if (result < sizeof(*get_ie)) {
+		dev_err(dev, "not enough data returned for decoding GET IE "
+			"(%zu bytes received vs %zu needed)\n",
+			result, sizeof(*get_ie));
+		return -EINVAL;
+	} else if (result < sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)) {
+		dev_err(dev, "not enough data returned for decoding GET IE "
+			"payload (%zu bytes received vs %zu needed)\n", result,
+			sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength));
+		return -EINVAL;
+	}
+
+	*pget_ie = get_ie;
+	return result;
+}
+
+
+/**
+ * Replace all IEs currently being transmitted by a device
+ *
+ * @cmd:    pointer to the SET-IE command with the IEs to set
+ * @size:   size of @buf
+ */
+int uwb_rc_set_ie(struct uwb_rc *rc, struct uwb_rc_cmd_set_ie *cmd)
+{
+	int result;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_evt_set_ie reply;
+
+	reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply.rceb.wEvent = UWB_RC_CMD_SET_IE;
+	result = uwb_rc_cmd(rc, "SET-IE", &cmd->rccb,
+			    sizeof(*cmd) + le16_to_cpu(cmd->wIELength),
+			    &reply.rceb, sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	else if (result != sizeof(reply)) {
+		dev_err(dev, "SET-IE: not enough data to decode reply "
+			"(%d bytes received vs %zu needed)\n",
+			result, sizeof(reply));
+		result = -EIO;
+	} else if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(dev, "SET-IE: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+		result = -EIO;
+	} else
+		result = 0;
+error_cmd:
+	return result;
+}
+
+/* Cleanup the whole IE management subsystem */
+void uwb_rc_ie_init(struct uwb_rc *uwb_rc)
+{
+	mutex_init(&uwb_rc->ies_mutex);
+}
+
+
+/**
+ * uwb_rc_ie_setup - setup a radio controller's IE manager
+ * @uwb_rc: the radio controller.
+ *
+ * The current set of IEs are obtained from the hardware with a GET-IE
+ * command (since the radio controller is not yet beaconing this will
+ * be just the hardware's MAC and PHY Capability IEs).
+ *
+ * Returns 0 on success; -ve on an error.
+ */
+int uwb_rc_ie_setup(struct uwb_rc *uwb_rc)
+{
+	struct uwb_rc_evt_get_ie *ie_info = NULL;
+	int capacity;
+
+	capacity = uwb_rc_get_ie(uwb_rc, &ie_info);
+	if (capacity < 0)
+		return capacity;
+
+	mutex_lock(&uwb_rc->ies_mutex);
+
+	uwb_rc->ies = (struct uwb_rc_cmd_set_ie *)ie_info;
+	uwb_rc->ies->rccb.bCommandType = UWB_RC_CET_GENERAL;
+	uwb_rc->ies->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_IE);
+	uwb_rc->ies_capacity = capacity;
+
+	mutex_unlock(&uwb_rc->ies_mutex);
+
+	return 0;
+}
+
+
+/* Cleanup the whole IE management subsystem */
+void uwb_rc_ie_release(struct uwb_rc *uwb_rc)
+{
+	kfree(uwb_rc->ies);
+	uwb_rc->ies = NULL;
+	uwb_rc->ies_capacity = 0;
+}
+
+
+static int uwb_rc_ie_add_one(struct uwb_rc *rc, const struct uwb_ie_hdr *new_ie)
+{
+	struct uwb_rc_cmd_set_ie *new_ies;
+	void *ptr, *prev_ie;
+	struct uwb_ie_hdr *ie;
+	size_t length, new_ie_len, new_capacity, size, prev_size;
+
+	length = le16_to_cpu(rc->ies->wIELength);
+	new_ie_len = sizeof(struct uwb_ie_hdr) + new_ie->length;
+	new_capacity = sizeof(struct uwb_rc_cmd_set_ie) + length + new_ie_len;
+
+	if (new_capacity > rc->ies_capacity) {
+		new_ies = krealloc(rc->ies, new_capacity, GFP_KERNEL);
+		if (!new_ies)
+			return -ENOMEM;
+		rc->ies = new_ies;
+	}
+
+	ptr = rc->ies->IEData;
+	size = length;
+	for (;;) {
+		prev_ie = ptr;
+		prev_size = size;
+		ie = uwb_ie_next(&ptr, &size);
+		if (!ie || ie->element_id > new_ie->element_id)
+			break;
+	}
+
+	memmove(prev_ie + new_ie_len, prev_ie, prev_size);
+	memcpy(prev_ie, new_ie, new_ie_len);
+	rc->ies->wIELength = cpu_to_le16(length + new_ie_len);
+
+	return 0;
+}
+
+/**
+ * uwb_rc_ie_add - add new IEs to the radio controller's beacon
+ * @uwb_rc: the radio controller.
+ * @ies: the buffer containing the new IE or IEs to be added to
+ *       the device's beacon.
+ * @size: length of all the IEs.
+ *
+ * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB
+ * after the device sent the first beacon that includes the IEs specified
+ * in the SET IE command. We thus cannot send this command if the device is
+ * not beaconing. Instead, a SET IE command will be sent later right after
+ * we start beaconing.
+ *
+ * Setting an IE on the device will overwrite all current IEs in device. So
+ * we take the current IEs being transmitted by the device, insert the
+ * new one, and call SET IE with all the IEs needed.
+ *
+ * Returns 0 on success; or -ENOMEM.
+ */
+int uwb_rc_ie_add(struct uwb_rc *uwb_rc,
+		  const struct uwb_ie_hdr *ies, size_t size)
+{
+	int result = 0;
+	void *ptr;
+	const struct uwb_ie_hdr *ie;
+
+	mutex_lock(&uwb_rc->ies_mutex);
+
+	ptr = (void *)ies;
+	for (;;) {
+		ie = uwb_ie_next(&ptr, &size);
+		if (!ie)
+			break;
+
+		result = uwb_rc_ie_add_one(uwb_rc, ie);
+		if (result < 0)
+			break;
+	}
+	if (result >= 0) {
+		if (size == 0) {
+			if (uwb_rc->beaconing != -1)
+				result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies);
+		} else
+			result = -EINVAL;
+	}
+
+	mutex_unlock(&uwb_rc->ies_mutex);
+
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_ie_add);
+
+
+/*
+ * Remove an IE from internal cache
+ *
+ * We are dealing with our internal IE cache so no need to verify that the
+ * IEs are valid (it has been done already).
+ *
+ * Should be called with ies_mutex held
+ *
+ * We do not break out once an IE is found in the cache. It is currently
+ * possible to have more than one IE with the same ID included in the
+ * beacon. We don't reallocate, we just mark the size smaller.
+ */
+static
+void uwb_rc_ie_cache_rm(struct uwb_rc *uwb_rc, enum uwb_ie to_remove)
+{
+	struct uwb_ie_hdr *ie;
+	size_t len = le16_to_cpu(uwb_rc->ies->wIELength);
+	void *ptr;
+	size_t size;
+
+	ptr = uwb_rc->ies->IEData;
+	size = len;
+	for (;;) {
+		ie = uwb_ie_next(&ptr, &size);
+		if (!ie)
+			break;
+		if (ie->element_id == to_remove) {
+			len -= sizeof(struct uwb_ie_hdr) + ie->length;
+			memmove(ie, ptr, size);
+			ptr = ie;
+		}
+	}
+	uwb_rc->ies->wIELength = cpu_to_le16(len);
+}
+
+
+/**
+ * uwb_rc_ie_rm - remove an IE from the radio controller's beacon
+ * @uwb_rc: the radio controller.
+ * @element_id: the element ID of the IE to remove.
+ *
+ * Only IEs previously added with uwb_rc_ie_add() may be removed.
+ *
+ * Returns 0 on success; or -ve the SET-IE command to the radio
+ * controller failed.
+ */
+int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id)
+{
+	int result = 0;
+
+	mutex_lock(&uwb_rc->ies_mutex);
+
+	uwb_rc_ie_cache_rm(uwb_rc, element_id);
+
+	if (uwb_rc->beaconing != -1)
+		result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies);
+
+	mutex_unlock(&uwb_rc->ies_mutex);
+
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_ie_rm);
diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c
new file mode 100644
index 000000000..72033589d
--- /dev/null
+++ b/drivers/uwb/lc-dev.c
@@ -0,0 +1,471 @@
+/*
+ * Ultra Wide Band
+ * Life cycle of devices
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/random.h>
+#include <linux/stat.h>
+#include "uwb-internal.h"
+
+/* We initialize addresses to 0xff (invalid, as it is bcast) */
+static inline void uwb_dev_addr_init(struct uwb_dev_addr *addr)
+{
+	memset(&addr->data, 0xff, sizeof(addr->data));
+}
+
+static inline void uwb_mac_addr_init(struct uwb_mac_addr *addr)
+{
+	memset(&addr->data, 0xff, sizeof(addr->data));
+}
+
+/*
+ * Add callback @new to be called when an event occurs in @rc.
+ */
+int uwb_notifs_register(struct uwb_rc *rc, struct uwb_notifs_handler *new)
+{
+	if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
+		return -ERESTARTSYS;
+	list_add(&new->list_node, &rc->notifs_chain.list);
+	mutex_unlock(&rc->notifs_chain.mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_notifs_register);
+
+/*
+ * Remove event handler (callback)
+ */
+int uwb_notifs_deregister(struct uwb_rc *rc, struct uwb_notifs_handler *entry)
+{
+	if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
+		return -ERESTARTSYS;
+	list_del(&entry->list_node);
+	mutex_unlock(&rc->notifs_chain.mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_notifs_deregister);
+
+/*
+ * Notify all event handlers of a given event on @rc
+ *
+ * We are called with a valid reference to the device, or NULL if the
+ * event is not for a particular event (e.g., a BG join event).
+ */
+void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event)
+{
+	struct uwb_notifs_handler *handler;
+	if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
+		return;
+	if (!list_empty(&rc->notifs_chain.list)) {
+		list_for_each_entry(handler, &rc->notifs_chain.list, list_node) {
+			handler->cb(handler->data, uwb_dev, event);
+		}
+	}
+	mutex_unlock(&rc->notifs_chain.mutex);
+}
+
+/*
+ * Release the backing device of a uwb_dev that has been dynamically allocated.
+ */
+static void uwb_dev_sys_release(struct device *dev)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+
+	uwb_bce_put(uwb_dev->bce);
+	memset(uwb_dev, 0x69, sizeof(*uwb_dev));
+	kfree(uwb_dev);
+}
+
+/*
+ * Initialize a UWB device instance
+ *
+ * Alloc, zero and call this function.
+ */
+void uwb_dev_init(struct uwb_dev *uwb_dev)
+{
+	mutex_init(&uwb_dev->mutex);
+	device_initialize(&uwb_dev->dev);
+	uwb_dev->dev.release = uwb_dev_sys_release;
+	uwb_dev_addr_init(&uwb_dev->dev_addr);
+	uwb_mac_addr_init(&uwb_dev->mac_addr);
+	bitmap_fill(uwb_dev->streams, UWB_NUM_GLOBAL_STREAMS);
+}
+
+static ssize_t uwb_dev_EUI_48_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	char addr[UWB_ADDR_STRSIZE];
+
+	uwb_mac_addr_print(addr, sizeof(addr), &uwb_dev->mac_addr);
+	return sprintf(buf, "%s\n", addr);
+}
+static DEVICE_ATTR(EUI_48, S_IRUGO, uwb_dev_EUI_48_show, NULL);
+
+static ssize_t uwb_dev_DevAddr_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	char addr[UWB_ADDR_STRSIZE];
+
+	uwb_dev_addr_print(addr, sizeof(addr), &uwb_dev->dev_addr);
+	return sprintf(buf, "%s\n", addr);
+}
+static DEVICE_ATTR(DevAddr, S_IRUGO, uwb_dev_DevAddr_show, NULL);
+
+/*
+ * Show the BPST of this device.
+ *
+ * Calculated from the receive time of the device's beacon and it's
+ * slot number.
+ */
+static ssize_t uwb_dev_BPST_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_beca_e *bce;
+	struct uwb_beacon_frame *bf;
+	u16 bpst;
+
+	bce = uwb_dev->bce;
+	mutex_lock(&bce->mutex);
+	bf = (struct uwb_beacon_frame *)bce->be->BeaconInfo;
+	bpst = bce->be->wBPSTOffset
+		- (u16)(bf->Beacon_Slot_Number * UWB_BEACON_SLOT_LENGTH_US);
+	mutex_unlock(&bce->mutex);
+
+	return sprintf(buf, "%d\n", bpst);
+}
+static DEVICE_ATTR(BPST, S_IRUGO, uwb_dev_BPST_show, NULL);
+
+/*
+ * Show the IEs a device is beaconing
+ *
+ * We need to access the beacon cache, so we just lock it really
+ * quick, print the IEs and unlock.
+ *
+ * We have a reference on the cache entry, so that should be
+ * quite safe.
+ */
+static ssize_t uwb_dev_IEs_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+
+	return uwb_bce_print_IEs(uwb_dev, uwb_dev->bce, buf, PAGE_SIZE);
+}
+static DEVICE_ATTR(IEs, S_IRUGO | S_IWUSR, uwb_dev_IEs_show, NULL);
+
+static ssize_t uwb_dev_LQE_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_beca_e *bce = uwb_dev->bce;
+	size_t result;
+
+	mutex_lock(&bce->mutex);
+	result = stats_show(&uwb_dev->bce->lqe_stats, buf);
+	mutex_unlock(&bce->mutex);
+	return result;
+}
+
+static ssize_t uwb_dev_LQE_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_beca_e *bce = uwb_dev->bce;
+	ssize_t result;
+
+	mutex_lock(&bce->mutex);
+	result = stats_store(&uwb_dev->bce->lqe_stats, buf, size);
+	mutex_unlock(&bce->mutex);
+	return result;
+}
+static DEVICE_ATTR(LQE, S_IRUGO | S_IWUSR, uwb_dev_LQE_show, uwb_dev_LQE_store);
+
+static ssize_t uwb_dev_RSSI_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_beca_e *bce = uwb_dev->bce;
+	size_t result;
+
+	mutex_lock(&bce->mutex);
+	result = stats_show(&uwb_dev->bce->rssi_stats, buf);
+	mutex_unlock(&bce->mutex);
+	return result;
+}
+
+static ssize_t uwb_dev_RSSI_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_beca_e *bce = uwb_dev->bce;
+	ssize_t result;
+
+	mutex_lock(&bce->mutex);
+	result = stats_store(&uwb_dev->bce->rssi_stats, buf, size);
+	mutex_unlock(&bce->mutex);
+	return result;
+}
+static DEVICE_ATTR(RSSI, S_IRUGO | S_IWUSR, uwb_dev_RSSI_show, uwb_dev_RSSI_store);
+
+
+static struct attribute *uwb_dev_attrs[] = {
+	&dev_attr_EUI_48.attr,
+	&dev_attr_DevAddr.attr,
+	&dev_attr_BPST.attr,
+	&dev_attr_IEs.attr,
+	&dev_attr_LQE.attr,
+	&dev_attr_RSSI.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(uwb_dev);
+
+/* UWB bus type. */
+struct bus_type uwb_bus_type = {
+	.name =		"uwb",
+	.dev_groups =	uwb_dev_groups,
+};
+
+/**
+ * Device SYSFS registration
+ */
+static int __uwb_dev_sys_add(struct uwb_dev *uwb_dev, struct device *parent_dev)
+{
+	struct device *dev;
+
+	dev = &uwb_dev->dev;
+	dev->parent = parent_dev;
+	dev_set_drvdata(dev, uwb_dev);
+
+	return device_add(dev);
+}
+
+
+static void __uwb_dev_sys_rm(struct uwb_dev *uwb_dev)
+{
+	dev_set_drvdata(&uwb_dev->dev, NULL);
+	device_del(&uwb_dev->dev);
+}
+
+
+/**
+ * Register and initialize a new UWB device
+ *
+ * Did you call uwb_dev_init() on it?
+ *
+ * @parent_rc: is the parent radio controller who has the link to the
+ *             device. When registering the UWB device that is a UWB
+ *             Radio Controller, we point back to it.
+ *
+ * If registering the device that is part of a radio, caller has set
+ * rc->uwb_dev->dev. Otherwise it is to be left NULL--a new one will
+ * be allocated.
+ */
+int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev,
+		struct uwb_rc *parent_rc)
+{
+	int result;
+	struct device *dev;
+
+	BUG_ON(uwb_dev == NULL);
+	BUG_ON(parent_dev == NULL);
+	BUG_ON(parent_rc == NULL);
+
+	mutex_lock(&uwb_dev->mutex);
+	dev = &uwb_dev->dev;
+	uwb_dev->rc = parent_rc;
+	result = __uwb_dev_sys_add(uwb_dev, parent_dev);
+	if (result < 0)
+		printk(KERN_ERR "UWB: unable to register dev %s with sysfs: %d\n",
+		       dev_name(dev), result);
+	mutex_unlock(&uwb_dev->mutex);
+	return result;
+}
+
+
+void uwb_dev_rm(struct uwb_dev *uwb_dev)
+{
+	mutex_lock(&uwb_dev->mutex);
+	__uwb_dev_sys_rm(uwb_dev);
+	mutex_unlock(&uwb_dev->mutex);
+}
+
+
+static
+int __uwb_dev_try_get(struct device *dev, void *__target_uwb_dev)
+{
+	struct uwb_dev *target_uwb_dev = __target_uwb_dev;
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	if (uwb_dev == target_uwb_dev) {
+		uwb_dev_get(uwb_dev);
+		return 1;
+	} else
+		return 0;
+}
+
+
+/**
+ * Given a UWB device descriptor, validate and refcount it
+ *
+ * @returns NULL if the device does not exist or is quiescing; the ptr to
+ *               it otherwise.
+ */
+struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev)
+{
+	if (uwb_dev_for_each(rc, __uwb_dev_try_get, uwb_dev))
+		return uwb_dev;
+	else
+		return NULL;
+}
+EXPORT_SYMBOL_GPL(uwb_dev_try_get);
+
+
+/**
+ * Remove a device from the system [grunt for other functions]
+ */
+int __uwb_dev_offair(struct uwb_dev *uwb_dev, struct uwb_rc *rc)
+{
+	struct device *dev = &uwb_dev->dev;
+	char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
+
+	uwb_mac_addr_print(macbuf, sizeof(macbuf), &uwb_dev->mac_addr);
+	uwb_dev_addr_print(devbuf, sizeof(devbuf), &uwb_dev->dev_addr);
+	dev_info(dev, "uwb device (mac %s dev %s) disconnected from %s %s\n",
+		 macbuf, devbuf,
+		 uwb_dev->dev.bus->name,
+		 rc ? dev_name(&(rc->uwb_dev.dev)) : "");
+	uwb_dev_rm(uwb_dev);
+	list_del(&uwb_dev->bce->node);
+	uwb_bce_put(uwb_dev->bce);
+	uwb_dev_put(uwb_dev);	/* for the creation in _onair() */
+
+	return 0;
+}
+
+
+/**
+ * A device went off the air, clean up after it!
+ *
+ * This is called by the UWB Daemon (through the beacon purge function
+ * uwb_bcn_cache_purge) when it is detected that a device has been in
+ * radio silence for a while.
+ *
+ * If this device is actually a local radio controller we don't need
+ * to go through the offair process, as it is not registered as that.
+ *
+ * NOTE: uwb_bcn_cache.mutex is held!
+ */
+void uwbd_dev_offair(struct uwb_beca_e *bce)
+{
+	struct uwb_dev *uwb_dev;
+
+	uwb_dev = bce->uwb_dev;
+	if (uwb_dev) {
+		uwb_notify(uwb_dev->rc, uwb_dev, UWB_NOTIF_OFFAIR);
+		__uwb_dev_offair(uwb_dev, uwb_dev->rc);
+	}
+}
+
+
+/**
+ * A device went on the air, start it up!
+ *
+ * This is called by the UWB Daemon when it is detected that a device
+ * has popped up in the radio range of the radio controller.
+ *
+ * It will just create the freaking device, register the beacon and
+ * stuff and yatla, done.
+ *
+ *
+ * NOTE: uwb_beca.mutex is held, bce->mutex is held
+ */
+void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
+{
+	int result;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_dev *uwb_dev;
+	char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
+
+	uwb_mac_addr_print(macbuf, sizeof(macbuf), bce->mac_addr);
+	uwb_dev_addr_print(devbuf, sizeof(devbuf), &bce->dev_addr);
+	uwb_dev = kzalloc(sizeof(struct uwb_dev), GFP_KERNEL);
+	if (uwb_dev == NULL) {
+		dev_err(dev, "new device %s: Cannot allocate memory\n",
+			macbuf);
+		return;
+	}
+	uwb_dev_init(uwb_dev);		/* This sets refcnt to one, we own it */
+	uwb_dev->dev.bus = &uwb_bus_type;
+	uwb_dev->mac_addr = *bce->mac_addr;
+	uwb_dev->dev_addr = bce->dev_addr;
+	dev_set_name(&uwb_dev->dev, "%s", macbuf);
+
+	/* plug the beacon cache */
+	bce->uwb_dev = uwb_dev;
+	uwb_dev->bce = bce;
+	uwb_bce_get(bce);		/* released in uwb_dev_sys_release() */
+
+	result = uwb_dev_add(uwb_dev, &rc->uwb_dev.dev, rc);
+	if (result < 0) {
+		dev_err(dev, "new device %s: cannot instantiate device\n",
+			macbuf);
+		goto error_dev_add;
+	}
+
+	dev_info(dev, "uwb device (mac %s dev %s) connected to %s %s\n",
+		 macbuf, devbuf, uwb_dev->dev.bus->name,
+		 dev_name(&(rc->uwb_dev.dev)));
+	uwb_notify(rc, uwb_dev, UWB_NOTIF_ONAIR);
+	return;
+
+error_dev_add:
+	bce->uwb_dev = NULL;
+	uwb_bce_put(bce);
+	kfree(uwb_dev);
+	return;
+}
+
+/**
+ * Iterate over the list of UWB devices, calling a @function on each
+ *
+ * See docs for bus_for_each()....
+ *
+ * @rc:       radio controller for the devices.
+ * @function: function to call.
+ * @priv:     data to pass to @function.
+ * @returns:  0 if no invocation of function() returned a value
+ *            different to zero. That value otherwise.
+ */
+int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f function, void *priv)
+{
+	return device_for_each_child(&rc->uwb_dev.dev, priv, function);
+}
+EXPORT_SYMBOL_GPL(uwb_dev_for_each);
diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c
new file mode 100644
index 000000000..b0816c753
--- /dev/null
+++ b/drivers/uwb/lc-rc.c
@@ -0,0 +1,583 @@
+/*
+ * Ultra Wide Band
+ * Life cycle of radio controllers
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * A UWB radio controller is also a UWB device, so it embeds one...
+ *
+ * List of RCs comes from the 'struct class uwb_rc_class'.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/random.h>
+#include <linux/kdev_t.h>
+#include <linux/etherdevice.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+static int uwb_rc_index_match(struct device *dev, const void *data)
+{
+	const int *index = data;
+	struct uwb_rc *rc = dev_get_drvdata(dev);
+
+	if (rc->index == *index)
+		return 1;
+	return 0;
+}
+
+static struct uwb_rc *uwb_rc_find_by_index(int index)
+{
+	struct device *dev;
+	struct uwb_rc *rc = NULL;
+
+	dev = class_find_device(&uwb_rc_class, NULL, &index, uwb_rc_index_match);
+	if (dev) {
+		rc = dev_get_drvdata(dev);
+		put_device(dev);
+	}
+
+	return rc;
+}
+
+static int uwb_rc_new_index(void)
+{
+	int index = 0;
+
+	for (;;) {
+		if (!uwb_rc_find_by_index(index))
+			return index;
+		if (++index < 0)
+			index = 0;
+	}
+}
+
+/**
+ * Release the backing device of a uwb_rc that has been dynamically allocated.
+ */
+static void uwb_rc_sys_release(struct device *dev)
+{
+	struct uwb_dev *uwb_dev = container_of(dev, struct uwb_dev, dev);
+	struct uwb_rc *rc = container_of(uwb_dev, struct uwb_rc, uwb_dev);
+
+	uwb_rc_ie_release(rc);
+	kfree(rc);
+}
+
+
+void uwb_rc_init(struct uwb_rc *rc)
+{
+	struct uwb_dev *uwb_dev = &rc->uwb_dev;
+
+	uwb_dev_init(uwb_dev);
+	rc->uwb_dev.dev.class = &uwb_rc_class;
+	rc->uwb_dev.dev.release = uwb_rc_sys_release;
+	uwb_rc_neh_create(rc);
+	rc->beaconing = -1;
+	rc->scan_type = UWB_SCAN_DISABLED;
+	INIT_LIST_HEAD(&rc->notifs_chain.list);
+	mutex_init(&rc->notifs_chain.mutex);
+	INIT_LIST_HEAD(&rc->uwb_beca.list);
+	mutex_init(&rc->uwb_beca.mutex);
+	uwb_drp_avail_init(rc);
+	uwb_rc_ie_init(rc);
+	uwb_rsv_init(rc);
+	uwb_rc_pal_init(rc);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_init);
+
+
+struct uwb_rc *uwb_rc_alloc(void)
+{
+	struct uwb_rc *rc;
+	rc = kzalloc(sizeof(*rc), GFP_KERNEL);
+	if (rc == NULL)
+		return NULL;
+	uwb_rc_init(rc);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_alloc);
+
+/*
+ * Show the ASIE that is broadcast in the UWB beacon by this uwb_rc device.
+ */
+static ssize_t ASIE_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	struct uwb_ie_hdr *ie;
+	void *ptr;
+	size_t len;
+	int result = 0;
+
+	/* init empty buffer. */
+	result = scnprintf(buf, PAGE_SIZE, "\n");
+	mutex_lock(&rc->ies_mutex);
+	/* walk IEData looking for an ASIE. */
+	ptr = rc->ies->IEData;
+	len = le16_to_cpu(rc->ies->wIELength);
+	for (;;) {
+		ie = uwb_ie_next(&ptr, &len);
+		if (!ie)
+			break;
+		if (ie->element_id == UWB_APP_SPEC_IE) {
+			result = uwb_ie_dump_hex(ie,
+					ie->length + sizeof(struct uwb_ie_hdr),
+					buf, PAGE_SIZE);
+			break;
+		}
+	}
+	mutex_unlock(&rc->ies_mutex);
+
+	return result;
+}
+
+/*
+ * Update the ASIE that is broadcast in the UWB beacon by this uwb_rc device.
+ */
+static ssize_t ASIE_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	char ie_buf[255];
+	int result, ie_len = 0;
+	const char *cur_ptr = buf;
+	struct uwb_ie_hdr *ie;
+
+	/* empty string means clear the ASIE. */
+	if (strlen(buf) <= 1) {
+		uwb_rc_ie_rm(rc, UWB_APP_SPEC_IE);
+		return size;
+	}
+
+	/* if non-empty string, convert string of hex chars to binary. */
+	while (ie_len < sizeof(ie_buf)) {
+		int char_count;
+
+		if (sscanf(cur_ptr, " %02hhX %n",
+				&(ie_buf[ie_len]), &char_count) > 0) {
+			++ie_len;
+			/* skip chars read from cur_ptr. */
+			cur_ptr += char_count;
+		} else {
+			break;
+		}
+	}
+
+	/* validate IE length and type. */
+	if (ie_len < sizeof(struct uwb_ie_hdr)) {
+		dev_err(dev, "%s: Invalid ASIE size %d.\n", __func__, ie_len);
+		return -EINVAL;
+	}
+
+	ie = (struct uwb_ie_hdr *)ie_buf;
+	if (ie->element_id != UWB_APP_SPEC_IE) {
+		dev_err(dev, "%s: Invalid IE element type size = 0x%02X.\n",
+				__func__, ie->element_id);
+		return -EINVAL;
+	}
+
+	/* bounds check length field from user. */
+	if (ie->length > (ie_len - sizeof(struct uwb_ie_hdr)))
+		ie->length = ie_len - sizeof(struct uwb_ie_hdr);
+
+	/*
+	 * Valid ASIE received. Remove current ASIE then add the new one using
+	 * uwb_rc_ie_add.
+	 */
+	uwb_rc_ie_rm(rc, UWB_APP_SPEC_IE);
+
+	result = uwb_rc_ie_add(rc, ie, ie->length + sizeof(struct uwb_ie_hdr));
+
+	return result >= 0 ? size : result;
+}
+static DEVICE_ATTR_RW(ASIE);
+
+static struct attribute *rc_attrs[] = {
+		&dev_attr_mac_address.attr,
+		&dev_attr_scan.attr,
+		&dev_attr_beacon.attr,
+		&dev_attr_ASIE.attr,
+		NULL,
+};
+
+static const struct attribute_group rc_attr_group = {
+	.attrs = rc_attrs,
+};
+
+/*
+ * Registration of sysfs specific stuff
+ */
+static int uwb_rc_sys_add(struct uwb_rc *rc)
+{
+	return sysfs_create_group(&rc->uwb_dev.dev.kobj, &rc_attr_group);
+}
+
+
+static void __uwb_rc_sys_rm(struct uwb_rc *rc)
+{
+	sysfs_remove_group(&rc->uwb_dev.dev.kobj, &rc_attr_group);
+}
+
+/**
+ * uwb_rc_mac_addr_setup - get an RC's EUI-48 address or set it
+ * @rc:  the radio controller.
+ *
+ * If the EUI-48 address is 00:00:00:00:00:00 or FF:FF:FF:FF:FF:FF
+ * then a random locally administered EUI-48 is generated and set on
+ * the device.  The probability of address collisions is sufficiently
+ * unlikely (1/2^40 = 9.1e-13) that they're not checked for.
+ */
+static
+int uwb_rc_mac_addr_setup(struct uwb_rc *rc)
+{
+	int result;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_dev *uwb_dev = &rc->uwb_dev;
+	char devname[UWB_ADDR_STRSIZE];
+	struct uwb_mac_addr addr;
+
+	result = uwb_rc_mac_addr_get(rc, &addr);
+	if (result < 0) {
+		dev_err(dev, "cannot retrieve UWB EUI-48 address: %d\n", result);
+		return result;
+	}
+
+	if (uwb_mac_addr_unset(&addr) || uwb_mac_addr_bcast(&addr)) {
+		addr.data[0] = 0x02; /* locally administered and unicast */
+		get_random_bytes(&addr.data[1], sizeof(addr.data)-1);
+
+		result = uwb_rc_mac_addr_set(rc, &addr);
+		if (result < 0) {
+			uwb_mac_addr_print(devname, sizeof(devname), &addr);
+			dev_err(dev, "cannot set EUI-48 address %s: %d\n",
+				devname, result);
+			return result;
+		}
+	}
+	uwb_dev->mac_addr = addr;
+	return 0;
+}
+
+
+
+static int uwb_rc_setup(struct uwb_rc *rc)
+{
+	int result;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	result = uwb_radio_setup(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot setup UWB radio: %d\n", result);
+		goto error;
+	}
+	result = uwb_rc_mac_addr_setup(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot setup UWB MAC address: %d\n", result);
+		goto error;
+	}
+	result = uwb_rc_dev_addr_assign(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot assign UWB DevAddr: %d\n", result);
+		goto error;
+	}
+	result = uwb_rc_ie_setup(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot setup IE subsystem: %d\n", result);
+		goto error_ie_setup;
+	}
+	result = uwb_rsv_setup(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot setup reservation subsystem: %d\n", result);
+		goto error_rsv_setup;
+	}
+	uwb_dbg_add_rc(rc);
+	return 0;
+
+error_rsv_setup:
+	uwb_rc_ie_release(rc);
+error_ie_setup:
+error:
+	return result;
+}
+
+
+/**
+ * Register a new UWB radio controller
+ *
+ * Did you call uwb_rc_init() on your rc?
+ *
+ * We assume that this is being called with a > 0 refcount on
+ * it [through ops->{get|put}_device(). We'll take our own, though.
+ *
+ * @parent_dev is our real device, the one that provides the actual UWB device
+ */
+int uwb_rc_add(struct uwb_rc *rc, struct device *parent_dev, void *priv)
+{
+	int result;
+	struct device *dev;
+	char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
+
+	rc->index = uwb_rc_new_index();
+
+	dev = &rc->uwb_dev.dev;
+	dev_set_name(dev, "uwb%d", rc->index);
+
+	rc->priv = priv;
+
+	init_waitqueue_head(&rc->uwbd.wq);
+	INIT_LIST_HEAD(&rc->uwbd.event_list);
+	spin_lock_init(&rc->uwbd.event_list_lock);
+
+	uwbd_start(rc);
+
+	result = rc->start(rc);
+	if (result < 0)
+		goto error_rc_start;
+
+	result = uwb_rc_setup(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot setup UWB radio controller: %d\n", result);
+		goto error_rc_setup;
+	}
+
+	result = uwb_dev_add(&rc->uwb_dev, parent_dev, rc);
+	if (result < 0 && result != -EADDRNOTAVAIL)
+		goto error_dev_add;
+
+	result = uwb_rc_sys_add(rc);
+	if (result < 0) {
+		dev_err(parent_dev, "cannot register UWB radio controller "
+			"dev attributes: %d\n", result);
+		goto error_sys_add;
+	}
+
+	uwb_mac_addr_print(macbuf, sizeof(macbuf), &rc->uwb_dev.mac_addr);
+	uwb_dev_addr_print(devbuf, sizeof(devbuf), &rc->uwb_dev.dev_addr);
+	dev_info(dev,
+		 "new uwb radio controller (mac %s dev %s) on %s %s\n",
+		 macbuf, devbuf, parent_dev->bus->name, dev_name(parent_dev));
+	rc->ready = 1;
+	return 0;
+
+error_sys_add:
+	uwb_dev_rm(&rc->uwb_dev);
+error_dev_add:
+error_rc_setup:
+	rc->stop(rc);
+error_rc_start:
+	uwbd_stop(rc);
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_add);
+
+
+static int uwb_dev_offair_helper(struct device *dev, void *priv)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+
+	return __uwb_dev_offair(uwb_dev, uwb_dev->rc);
+}
+
+/*
+ * Remove a Radio Controller; stop beaconing/scanning, disconnect all children
+ */
+void uwb_rc_rm(struct uwb_rc *rc)
+{
+	rc->ready = 0;
+
+	uwb_dbg_del_rc(rc);
+	uwb_rsv_remove_all(rc);
+	uwb_radio_shutdown(rc);
+
+	rc->stop(rc);
+
+	uwbd_stop(rc);
+	uwb_rc_neh_destroy(rc);
+
+	uwb_dev_lock(&rc->uwb_dev);
+	rc->priv = NULL;
+	rc->cmd = NULL;
+	uwb_dev_unlock(&rc->uwb_dev);
+	mutex_lock(&rc->uwb_beca.mutex);
+	uwb_dev_for_each(rc, uwb_dev_offair_helper, NULL);
+	__uwb_rc_sys_rm(rc);
+	mutex_unlock(&rc->uwb_beca.mutex);
+	uwb_rsv_cleanup(rc);
+ 	uwb_beca_release(rc);
+	uwb_dev_rm(&rc->uwb_dev);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_rm);
+
+static int find_rc_try_get(struct device *dev, const void *data)
+{
+	const struct uwb_rc *target_rc = data;
+	struct uwb_rc *rc = dev_get_drvdata(dev);
+
+	if (rc == NULL) {
+		WARN_ON(1);
+		return 0;
+	}
+	if (rc == target_rc) {
+		if (rc->ready == 0)
+			return 0;
+		else
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * Given a radio controller descriptor, validate and refcount it
+ *
+ * @returns NULL if the rc does not exist or is quiescing; the ptr to
+ *               it otherwise.
+ */
+struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *target_rc)
+{
+	struct device *dev;
+	struct uwb_rc *rc = NULL;
+
+	dev = class_find_device(&uwb_rc_class, NULL, target_rc,
+				find_rc_try_get);
+	if (dev) {
+		rc = dev_get_drvdata(dev);
+		__uwb_rc_get(rc);
+		put_device(dev);
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(__uwb_rc_try_get);
+
+/*
+ * RC get for external refcount acquirers...
+ *
+ * Increments the refcount of the device and it's backend modules
+ */
+static inline struct uwb_rc *uwb_rc_get(struct uwb_rc *rc)
+{
+	if (rc->ready == 0)
+		return NULL;
+	uwb_dev_get(&rc->uwb_dev);
+	return rc;
+}
+
+static int find_rc_grandpa(struct device *dev, const void *data)
+{
+	const struct device *grandpa_dev = data;
+	struct uwb_rc *rc = dev_get_drvdata(dev);
+
+	if (rc->uwb_dev.dev.parent->parent == grandpa_dev) {
+		rc = uwb_rc_get(rc);
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ * Locate and refcount a radio controller given a common grand-parent
+ *
+ * @grandpa_dev  Pointer to the 'grandparent' device structure.
+ * @returns NULL If the rc does not exist or is quiescing; the ptr to
+ *               it otherwise, properly referenced.
+ *
+ * The Radio Control interface (or the UWB Radio Controller) is always
+ * an interface of a device. The parent is the interface, the
+ * grandparent is the device that encapsulates the interface.
+ *
+ * There is no need to lock around as the "grandpa" would be
+ * refcounted by the target, and to remove the referemes, the
+ * uwb_rc_class->sem would have to be taken--we hold it, ergo we
+ * should be safe.
+ */
+struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *grandpa_dev)
+{
+	struct device *dev;
+	struct uwb_rc *rc = NULL;
+
+	dev = class_find_device(&uwb_rc_class, NULL, grandpa_dev,
+				find_rc_grandpa);
+	if (dev) {
+		rc = dev_get_drvdata(dev);
+		put_device(dev);
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_get_by_grandpa);
+
+/**
+ * Find a radio controller by device address
+ *
+ * @returns the pointer to the radio controller, properly referenced
+ */
+static int find_rc_dev(struct device *dev, const void *data)
+{
+	const struct uwb_dev_addr *addr = data;
+	struct uwb_rc *rc = dev_get_drvdata(dev);
+
+	if (rc == NULL) {
+		WARN_ON(1);
+		return 0;
+	}
+	if (!uwb_dev_addr_cmp(&rc->uwb_dev.dev_addr, addr)) {
+		rc = uwb_rc_get(rc);
+		return 1;
+	}
+	return 0;
+}
+
+struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *addr)
+{
+	struct device *dev;
+	struct uwb_rc *rc = NULL;
+
+	dev = class_find_device(&uwb_rc_class, NULL, addr, find_rc_dev);
+	if (dev) {
+		rc = dev_get_drvdata(dev);
+		put_device(dev);
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_get_by_dev);
+
+/**
+ * Drop a reference on a radio controller
+ *
+ * This is the version that should be done by entities external to the
+ * UWB Radio Control stack (ie: clients of the API).
+ */
+void uwb_rc_put(struct uwb_rc *rc)
+{
+	__uwb_rc_put(rc);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_put);
diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c
new file mode 100644
index 000000000..fbdca728b
--- /dev/null
+++ b/drivers/uwb/neh.c
@@ -0,0 +1,620 @@
+/*
+ * WUSB Wire Adapter: Radio Control Interface (WUSB[8])
+ * Notification and Event Handling
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * The RC interface of the Host Wire Adapter (USB dongle) or WHCI PCI
+ * card delivers a stream of notifications and events to the
+ * notification end event endpoint or area. This code takes care of
+ * getting a buffer with that data, breaking it up in separate
+ * notifications and events and then deliver those.
+ *
+ * Events are answers to commands and they carry a context ID that
+ * associates them to the command. Notifications are that,
+ * notifications, they come out of the blue and have a context ID of
+ * zero. Think of the context ID kind of like a handler. The
+ * uwb_rc_neh_* code deals with managing context IDs.
+ *
+ * This is why you require a handle to operate on a UWB host. When you
+ * open a handle a context ID is assigned to you.
+ *
+ * So, as it is done is:
+ *
+ * 1. Add an event handler [uwb_rc_neh_add()] (assigns a ctx id)
+ * 2. Issue command [rc->cmd(rc, ...)]
+ * 3. Arm the timeout timer [uwb_rc_neh_arm()]
+ * 4, Release the reference to the neh [uwb_rc_neh_put()]
+ * 5. Wait for the callback
+ * 6. Command result (RCEB) is passed to the callback
+ *
+ * If (2) fails, you should remove the handle [uwb_rc_neh_rm()]
+ * instead of arming the timer.
+ *
+ * Handles are for using in *serialized* code, single thread.
+ *
+ * When the notification/event comes, the IRQ handler/endpoint
+ * callback passes the data read to uwb_rc_neh_grok() which will break
+ * it up in a discrete series of events, look up who is listening for
+ * them and execute the pertinent callbacks.
+ *
+ * If the reader detects an error while reading the data stream, call
+ * uwb_rc_neh_error().
+ *
+ * CONSTRAINTS/ASSUMPTIONS:
+ *
+ * - Most notifications/events are small (less thank .5k), copying
+ *   around is ok.
+ *
+ * - Notifications/events are ALWAYS smaller than PAGE_SIZE
+ *
+ * - Notifications/events always come in a single piece (ie: a buffer
+ *   will always contain entire notifications/events).
+ *
+ * - we cannot know in advance how long each event is (because they
+ *   lack a length field in their header--smart move by the standards
+ *   body, btw). So we need a facility to get the event size given the
+ *   header. This is what the EST code does (notif/Event Size
+ *   Tables), check nest.c--as well, you can associate the size to
+ *   the handle [w/ neh->extra_size()].
+ *
+ * - Most notifications/events are fixed size; only a few are variable
+ *   size (NEST takes care of that).
+ *
+ * - Listeners of events expect them, so they usually provide a
+ *   buffer, as they know the size. Listeners to notifications don't,
+ *   so we allocate their buffers dynamically.
+ */
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+/*
+ * UWB Radio Controller Notification/Event Handle
+ *
+ * Represents an entity waiting for an event coming from the UWB Radio
+ * Controller with a given context id (context) and type (evt_type and
+ * evt). On reception of the notification/event, the callback (cb) is
+ * called with the event.
+ *
+ * If the timer expires before the event is received, the callback is
+ * called with -ETIMEDOUT as the event size.
+ */
+struct uwb_rc_neh {
+	struct kref kref;
+
+	struct uwb_rc *rc;
+	u8 evt_type;
+	__le16 evt;
+	u8 context;
+	u8 completed;
+	uwb_rc_cmd_cb_f cb;
+	void *arg;
+
+	struct timer_list timer;
+	struct list_head list_node;
+};
+
+static void uwb_rc_neh_timer(struct timer_list *t);
+
+static void uwb_rc_neh_release(struct kref *kref)
+{
+	struct uwb_rc_neh *neh = container_of(kref, struct uwb_rc_neh, kref);
+
+	kfree(neh);
+}
+
+static void uwb_rc_neh_get(struct uwb_rc_neh *neh)
+{
+	kref_get(&neh->kref);
+}
+
+/**
+ * uwb_rc_neh_put - release reference to a neh
+ * @neh: the neh
+ */
+void uwb_rc_neh_put(struct uwb_rc_neh *neh)
+{
+	kref_put(&neh->kref, uwb_rc_neh_release);
+}
+
+
+/**
+ * Assigns @neh a context id from @rc's pool
+ *
+ * @rc:	    UWB Radio Controller descriptor; @rc->neh_lock taken
+ * @neh:    Notification/Event Handle
+ * @returns 0 if context id was assigned ok; < 0 errno on error (if
+ *	    all the context IDs are taken).
+ *
+ * (assumes @wa is locked).
+ *
+ * NOTE: WUSB spec reserves context ids 0x00 for notifications and
+ *	 0xff is invalid, so they must not be used. Initialization
+ *	 fills up those two in the bitmap so they are not allocated.
+ *
+ * We spread the allocation around to reduce the possibility of two
+ * consecutive opened @neh's getting the same context ID assigned (to
+ * avoid surprises with late events that timed out long time ago). So
+ * first we search from where @rc->ctx_roll is, if not found, we
+ * search from zero.
+ */
+static
+int __uwb_rc_ctx_get(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+	int result;
+	result = find_next_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX,
+				    rc->ctx_roll++);
+	if (result < UWB_RC_CTX_MAX)
+		goto found;
+	result = find_first_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX);
+	if (result < UWB_RC_CTX_MAX)
+		goto found;
+	return -ENFILE;
+found:
+	set_bit(result, rc->ctx_bm);
+	neh->context = result;
+	return 0;
+}
+
+
+/** Releases @neh's context ID back to @rc (@rc->neh_lock is locked). */
+static
+void __uwb_rc_ctx_put(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	if (neh->context == 0)
+		return;
+	if (test_bit(neh->context, rc->ctx_bm) == 0) {
+		dev_err(dev, "context %u not set in bitmap\n",
+			neh->context);
+		WARN_ON(1);
+	}
+	clear_bit(neh->context, rc->ctx_bm);
+	neh->context = 0;
+}
+
+/**
+ * uwb_rc_neh_add - add a neh for a radio controller command
+ * @rc:             the radio controller
+ * @cmd:            the radio controller command
+ * @expected_type:  the type of the expected response event
+ * @expected_event: the expected event ID
+ * @cb:             callback for when the event is received
+ * @arg:            argument for the callback
+ *
+ * Creates a neh and adds it to the list of those waiting for an
+ * event.  A context ID will be assigned to the command.
+ */
+struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd,
+				  u8 expected_type, u16 expected_event,
+				  uwb_rc_cmd_cb_f cb, void *arg)
+{
+	int result;
+	unsigned long flags;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_neh *neh;
+
+	neh = kzalloc(sizeof(*neh), GFP_KERNEL);
+	if (neh == NULL) {
+		result = -ENOMEM;
+		goto error_kzalloc;
+	}
+
+	kref_init(&neh->kref);
+	INIT_LIST_HEAD(&neh->list_node);
+	timer_setup(&neh->timer, uwb_rc_neh_timer, 0);
+
+	neh->rc = rc;
+	neh->evt_type = expected_type;
+	neh->evt = cpu_to_le16(expected_event);
+	neh->cb = cb;
+	neh->arg = arg;
+
+	spin_lock_irqsave(&rc->neh_lock, flags);
+	result = __uwb_rc_ctx_get(rc, neh);
+	if (result >= 0) {
+		cmd->bCommandContext = neh->context;
+		list_add_tail(&neh->list_node, &rc->neh_list);
+		uwb_rc_neh_get(neh);
+	}
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+	if (result < 0)
+		goto error_ctx_get;
+
+	return neh;
+
+error_ctx_get:
+	kfree(neh);
+error_kzalloc:
+	dev_err(dev, "cannot open handle to radio controller: %d\n", result);
+	return ERR_PTR(result);
+}
+
+static void __uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+	__uwb_rc_ctx_put(rc, neh);
+	list_del(&neh->list_node);
+}
+
+/**
+ * uwb_rc_neh_rm - remove a neh.
+ * @rc:  the radio controller
+ * @neh: the neh to remove
+ *
+ * Remove an active neh immediately instead of waiting for the event
+ * (or a time out).
+ */
+void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc->neh_lock, flags);
+	__uwb_rc_neh_rm(rc, neh);
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+	del_timer_sync(&neh->timer);
+	uwb_rc_neh_put(neh);
+}
+
+/**
+ * uwb_rc_neh_arm - arm an event handler timeout timer
+ *
+ * @rc:     UWB Radio Controller
+ * @neh:    Notification/event handler for @rc
+ *
+ * The timer is only armed if the neh is active.
+ */
+void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc->neh_lock, flags);
+	if (neh->context)
+		mod_timer(&neh->timer,
+			  jiffies + msecs_to_jiffies(UWB_RC_CMD_TIMEOUT_MS));
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+}
+
+static void uwb_rc_neh_cb(struct uwb_rc_neh *neh, struct uwb_rceb *rceb, size_t size)
+{
+	(*neh->cb)(neh->rc, neh->arg, rceb, size);
+	uwb_rc_neh_put(neh);
+}
+
+static bool uwb_rc_neh_match(struct uwb_rc_neh *neh, const struct uwb_rceb *rceb)
+{
+	return neh->evt_type == rceb->bEventType
+		&& neh->evt == rceb->wEvent
+		&& neh->context == rceb->bEventContext;
+}
+
+/**
+ * Find the handle waiting for a RC Radio Control Event
+ *
+ * @rc:         UWB Radio Controller
+ * @rceb:       Pointer to the RCEB buffer
+ * @event_size: Pointer to the size of the RCEB buffer. Might be
+ *              adjusted to take into account the @neh->extra_size
+ *              settings.
+ *
+ * If the listener has no buffer (NULL buffer), one is allocated for
+ * the right size (the amount of data received). @neh->ptr will point
+ * to the event payload, which always starts with a 'struct
+ * uwb_rceb'. kfree() it when done.
+ */
+static
+struct uwb_rc_neh *uwb_rc_neh_lookup(struct uwb_rc *rc,
+				     const struct uwb_rceb *rceb)
+{
+	struct uwb_rc_neh *neh = NULL, *h;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc->neh_lock, flags);
+
+	list_for_each_entry(h, &rc->neh_list, list_node) {
+		if (uwb_rc_neh_match(h, rceb)) {
+			neh = h;
+			break;
+		}
+	}
+
+	if (neh)
+		__uwb_rc_neh_rm(rc, neh);
+
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+	return neh;
+}
+
+
+/*
+ * Process notifications coming from the radio control interface
+ *
+ * @rc:    UWB Radio Control Interface descriptor
+ * @neh:   Notification/Event Handler @neh->ptr points to
+ *         @uwb_evt->buffer.
+ *
+ * This function is called by the event/notif handling subsystem when
+ * notifications arrive (hwarc_probe() arms a notification/event handle
+ * that calls back this function for every received notification; this
+ * function then will rearm itself).
+ *
+ * Notification data buffers are dynamically allocated by the NEH
+ * handling code in neh.c [uwb_rc_neh_lookup()]. What is actually
+ * allocated is space to contain the notification data.
+ *
+ * Buffers are prefixed with a Radio Control Event Block (RCEB) as
+ * defined by the WUSB Wired-Adapter Radio Control interface. We
+ * just use it for the notification code.
+ *
+ * On each case statement we just transcode endianess of the different
+ * fields. We declare a pointer to a RCI definition of an event, and
+ * then to a UWB definition of the same event (which are the same,
+ * remember). Event if we use different pointers
+ */
+static
+void uwb_rc_notif(struct uwb_rc *rc, struct uwb_rceb *rceb, ssize_t size)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_event *uwb_evt;
+
+	if (size == -ESHUTDOWN)
+		return;
+	if (size < 0) {
+		dev_err(dev, "ignoring event with error code %zu\n",
+			size);
+		return;
+	}
+
+	uwb_evt = kzalloc(sizeof(*uwb_evt), GFP_ATOMIC);
+	if (unlikely(uwb_evt == NULL)) {
+		dev_err(dev, "no memory to queue event 0x%02x/%04x/%02x\n",
+			rceb->bEventType, le16_to_cpu(rceb->wEvent),
+			rceb->bEventContext);
+		return;
+	}
+	uwb_evt->rc = __uwb_rc_get(rc);	/* will be put by uwbd's uwbd_event_handle() */
+	uwb_evt->ts_jiffies = jiffies;
+	uwb_evt->type = UWB_EVT_TYPE_NOTIF;
+	uwb_evt->notif.size = size;
+	uwb_evt->notif.rceb = rceb;
+
+	uwbd_event_queue(uwb_evt);
+}
+
+static void uwb_rc_neh_grok_event(struct uwb_rc *rc, struct uwb_rceb *rceb, size_t size)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_neh *neh;
+	struct uwb_rceb *notif;
+	unsigned long flags;
+
+	if (rceb->bEventContext == 0) {
+		notif = kmalloc(size, GFP_ATOMIC);
+		if (notif) {
+			memcpy(notif, rceb, size);
+			uwb_rc_notif(rc, notif, size);
+		} else
+			dev_err(dev, "event 0x%02x/%04x/%02x (%zu bytes): no memory\n",
+				rceb->bEventType, le16_to_cpu(rceb->wEvent),
+				rceb->bEventContext, size);
+	} else {
+		neh = uwb_rc_neh_lookup(rc, rceb);
+		if (neh) {
+			spin_lock_irqsave(&rc->neh_lock, flags);
+			/* to guard against a timeout */
+			neh->completed = 1;
+			del_timer(&neh->timer);
+			spin_unlock_irqrestore(&rc->neh_lock, flags);
+			uwb_rc_neh_cb(neh, rceb, size);
+		} else
+			dev_warn(dev, "event 0x%02x/%04x/%02x (%zu bytes): nobody cared\n",
+				 rceb->bEventType, le16_to_cpu(rceb->wEvent),
+				 rceb->bEventContext, size);
+	}
+}
+
+/**
+ * Given a buffer with one or more UWB RC events/notifications, break
+ * them up and dispatch them.
+ *
+ * @rc:	      UWB Radio Controller
+ * @buf:      Buffer with the stream of notifications/events
+ * @buf_size: Amount of data in the buffer
+ *
+ * Note each notification/event starts always with a 'struct
+ * uwb_rceb', so the minimum size if 4 bytes.
+ *
+ * The device may pass us events formatted differently than expected.
+ * These are first filtered, potentially creating a new event in a new
+ * memory location. If a new event is created by the filter it is also
+ * freed here.
+ *
+ * For each notif/event, tries to guess the size looking at the EST
+ * tables, then looks for a neh that is waiting for that event and if
+ * found, copies the payload to the neh's buffer and calls it back. If
+ * not, the data is ignored.
+ *
+ * Note that if we can't find a size description in the EST tables, we
+ * still might find a size in the 'neh' handle in uwb_rc_neh_lookup().
+ *
+ * Assumptions:
+ *
+ *   @rc->neh_lock is NOT taken
+ *
+ * We keep track of various sizes here:
+ * size:      contains the size of the buffer that is processed for the
+ *            incoming event. this buffer may contain events that are not
+ *            formatted as WHCI.
+ * real_size: the actual space taken by this event in the buffer.
+ *            We need to keep track of the real size of an event to be able to
+ *            advance the buffer correctly.
+ * event_size: the size of the event as expected by the core layer
+ *            [OR] the size of the event after filtering. if the filtering
+ *            created a new event in a new memory location then this is
+ *            effectively the size of a new event buffer
+ */
+void uwb_rc_neh_grok(struct uwb_rc *rc, void *buf, size_t buf_size)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	void *itr;
+	struct uwb_rceb *rceb;
+	size_t size, real_size, event_size;
+	int needtofree;
+
+	itr = buf;
+	size = buf_size;
+	while (size > 0) {
+		if (size < sizeof(*rceb)) {
+			dev_err(dev, "not enough data in event buffer to "
+				"process incoming events (%zu left, minimum is "
+				"%zu)\n", size, sizeof(*rceb));
+			break;
+		}
+
+		rceb = itr;
+		if (rc->filter_event) {
+			needtofree = rc->filter_event(rc, &rceb, size,
+						      &real_size, &event_size);
+			if (needtofree < 0 && needtofree != -ENOANO) {
+				dev_err(dev, "BUG: Unable to filter event "
+					"(0x%02x/%04x/%02x) from "
+					"device. \n", rceb->bEventType,
+					le16_to_cpu(rceb->wEvent),
+					rceb->bEventContext);
+				break;
+			}
+		} else
+			needtofree = -ENOANO;
+		/* do real processing if there was no filtering or the
+		 * filtering didn't act */
+		if (needtofree == -ENOANO) {
+			ssize_t ret = uwb_est_find_size(rc, rceb, size);
+			if (ret < 0)
+				break;
+			if (ret > size) {
+				dev_err(dev, "BUG: hw sent incomplete event "
+					"0x%02x/%04x/%02x (%zd bytes), only got "
+					"%zu bytes. We don't handle that.\n",
+					rceb->bEventType, le16_to_cpu(rceb->wEvent),
+					rceb->bEventContext, ret, size);
+				break;
+			}
+			real_size = event_size = ret;
+		}
+		uwb_rc_neh_grok_event(rc, rceb, event_size);
+
+		if (needtofree == 1)
+			kfree(rceb);
+
+		itr += real_size;
+		size -= real_size;
+	}
+}
+EXPORT_SYMBOL_GPL(uwb_rc_neh_grok);
+
+
+/**
+ * The entity that reads from the device notification/event channel has
+ * detected an error.
+ *
+ * @rc:    UWB Radio Controller
+ * @error: Errno error code
+ *
+ */
+void uwb_rc_neh_error(struct uwb_rc *rc, int error)
+{
+	struct uwb_rc_neh *neh;
+	unsigned long flags;
+
+	for (;;) {
+		spin_lock_irqsave(&rc->neh_lock, flags);
+		if (list_empty(&rc->neh_list)) {
+			spin_unlock_irqrestore(&rc->neh_lock, flags);
+			break;
+		}
+		neh = list_first_entry(&rc->neh_list, struct uwb_rc_neh, list_node);
+		__uwb_rc_neh_rm(rc, neh);
+		spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+		del_timer_sync(&neh->timer);
+		uwb_rc_neh_cb(neh, NULL, error);
+	}
+}
+EXPORT_SYMBOL_GPL(uwb_rc_neh_error);
+
+
+static void uwb_rc_neh_timer(struct timer_list *t)
+{
+	struct uwb_rc_neh *neh = from_timer(neh, t, timer);
+	struct uwb_rc *rc = neh->rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc->neh_lock, flags);
+	if (neh->completed) {
+		spin_unlock_irqrestore(&rc->neh_lock, flags);
+		return;
+	}
+	if (neh->context)
+		__uwb_rc_neh_rm(rc, neh);
+	else
+		neh = NULL;
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+	if (neh)
+		uwb_rc_neh_cb(neh, NULL, -ETIMEDOUT);
+}
+
+/** Initializes the @rc's neh subsystem
+ */
+void uwb_rc_neh_create(struct uwb_rc *rc)
+{
+	spin_lock_init(&rc->neh_lock);
+	INIT_LIST_HEAD(&rc->neh_list);
+	set_bit(0, rc->ctx_bm);		/* 0 is reserved (see [WUSB] table 8-65) */
+	set_bit(0xff, rc->ctx_bm);	/* and 0xff is invalid */
+	rc->ctx_roll = 1;
+}
+
+
+/** Release's the @rc's neh subsystem */
+void uwb_rc_neh_destroy(struct uwb_rc *rc)
+{
+	unsigned long flags;
+	struct uwb_rc_neh *neh;
+
+	for (;;) {
+		spin_lock_irqsave(&rc->neh_lock, flags);
+		if (list_empty(&rc->neh_list)) {
+			spin_unlock_irqrestore(&rc->neh_lock, flags);
+			break;
+		}
+		neh = list_first_entry(&rc->neh_list, struct uwb_rc_neh, list_node);
+		__uwb_rc_neh_rm(rc, neh);
+		spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+		del_timer_sync(&neh->timer);
+		uwb_rc_neh_put(neh);
+	}
+}
diff --git a/drivers/uwb/pal.c b/drivers/uwb/pal.c
new file mode 100644
index 000000000..678e93741
--- /dev/null
+++ b/drivers/uwb/pal.c
@@ -0,0 +1,139 @@
+/*
+ * UWB PAL support.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+#include <linux/uwb.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+/**
+ * uwb_pal_init - initialize a UWB PAL
+ * @pal: the PAL to initialize
+ */
+void uwb_pal_init(struct uwb_pal *pal)
+{
+	INIT_LIST_HEAD(&pal->node);
+}
+EXPORT_SYMBOL_GPL(uwb_pal_init);
+
+/**
+ * uwb_pal_register - register a UWB PAL
+ * @pal: the PAL
+ *
+ * The PAL must be initialized with uwb_pal_init().
+ */
+int uwb_pal_register(struct uwb_pal *pal)
+{
+	struct uwb_rc *rc = pal->rc;
+	int ret;
+
+	if (pal->device) {
+		/* create a link to the uwb_rc in the PAL device's directory. */
+		ret = sysfs_create_link(&pal->device->kobj,
+					&rc->uwb_dev.dev.kobj, "uwb_rc");
+		if (ret < 0)
+			return ret;
+		/* create a link to the PAL in the UWB device's directory. */
+		ret = sysfs_create_link(&rc->uwb_dev.dev.kobj,
+					&pal->device->kobj, pal->name);
+		if (ret < 0) {
+			sysfs_remove_link(&pal->device->kobj, "uwb_rc");
+			return ret;
+		}
+	}
+
+	pal->debugfs_dir = uwb_dbg_create_pal_dir(pal);
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	list_add(&pal->node, &rc->pals);
+	mutex_unlock(&rc->uwb_dev.mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_pal_register);
+
+static int find_rc(struct device *dev, const void *data)
+{
+	const struct uwb_rc *target_rc = data;
+	struct uwb_rc *rc = dev_get_drvdata(dev);
+
+	if (rc == NULL) {
+		WARN_ON(1);
+		return 0;
+	}
+	if (rc == target_rc) {
+		if (rc->ready == 0)
+			return 0;
+		else
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * Given a radio controller descriptor see if it is registered.
+ *
+ * @returns false if the rc does not exist or is quiescing; true otherwise.
+ */
+static bool uwb_rc_class_device_exists(struct uwb_rc *target_rc)
+{
+	struct device *dev;
+
+	dev = class_find_device(&uwb_rc_class, NULL, target_rc,	find_rc);
+
+	put_device(dev);
+
+	return (dev != NULL);
+}
+
+/**
+ * uwb_pal_unregister - unregister a UWB PAL
+ * @pal: the PAL
+ */
+void uwb_pal_unregister(struct uwb_pal *pal)
+{
+	struct uwb_rc *rc = pal->rc;
+
+	uwb_radio_stop(pal);
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	list_del(&pal->node);
+	mutex_unlock(&rc->uwb_dev.mutex);
+
+	debugfs_remove(pal->debugfs_dir);
+
+	if (pal->device) {
+		/* remove link to the PAL in the UWB device's directory. */
+		if (uwb_rc_class_device_exists(rc))
+			sysfs_remove_link(&rc->uwb_dev.dev.kobj, pal->name);
+
+		/* remove link to uwb_rc in the PAL device's directory. */
+		sysfs_remove_link(&pal->device->kobj, "uwb_rc");
+	}
+}
+EXPORT_SYMBOL_GPL(uwb_pal_unregister);
+
+/**
+ * uwb_rc_pal_init - initialize the PAL related parts of a radio controller
+ * @rc: the radio controller
+ */
+void uwb_rc_pal_init(struct uwb_rc *rc)
+{
+	INIT_LIST_HEAD(&rc->pals);
+}
diff --git a/drivers/uwb/radio.c b/drivers/uwb/radio.c
new file mode 100644
index 000000000..2427e9448
--- /dev/null
+++ b/drivers/uwb/radio.c
@@ -0,0 +1,207 @@
+/*
+ * UWB radio (channel) management.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/uwb.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+
+static int uwb_radio_select_channel(struct uwb_rc *rc)
+{
+	/*
+	 * Default to channel 9 (BG1, TFC1) unless the user has
+	 * selected a specific channel or there are no active PALs.
+	 */
+	if (rc->active_pals == 0)
+		return -1;
+	if (rc->beaconing_forced)
+		return rc->beaconing_forced;
+	return 9;
+}
+
+
+/*
+ * Notify all active PALs that the channel has changed.
+ */
+static void uwb_radio_channel_changed(struct uwb_rc *rc, int channel)
+{
+	struct uwb_pal *pal;
+
+	list_for_each_entry(pal, &rc->pals, node) {
+		if (pal->channel && channel != pal->channel) {
+			pal->channel = channel;
+			if (pal->channel_changed)
+				pal->channel_changed(pal, pal->channel);
+		}
+	}
+}
+
+/*
+ * Change to a new channel and notify any active PALs of the new
+ * channel.
+ *
+ * When stopping the radio, PALs need to be notified first so they can
+ * terminate any active reservations.
+ */
+static int uwb_radio_change_channel(struct uwb_rc *rc, int channel)
+{
+	int ret = 0;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	dev_dbg(dev, "%s: channel = %d, rc->beaconing = %d\n", __func__,
+		channel, rc->beaconing);
+
+	if (channel == -1)
+		uwb_radio_channel_changed(rc, channel);
+
+	if (channel != rc->beaconing) {
+		if (rc->beaconing != -1 && channel != -1) {
+			/*
+			 * FIXME: should signal the channel change
+			 * with a Channel Change IE.
+			 */
+			ret = uwb_radio_change_channel(rc, -1);
+			if (ret < 0)
+				return ret;
+		}
+		ret = uwb_rc_beacon(rc, channel, 0);
+	}
+
+	if (channel != -1)
+		uwb_radio_channel_changed(rc, rc->beaconing);
+
+	return ret;
+}
+
+/**
+ * uwb_radio_start - request that the radio be started
+ * @pal: the PAL making the request.
+ *
+ * If the radio is not already active, a suitable channel is selected
+ * and beacons are started.
+ */
+int uwb_radio_start(struct uwb_pal *pal)
+{
+	struct uwb_rc *rc = pal->rc;
+	int ret = 0;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+
+	if (!pal->channel) {
+		pal->channel = -1;
+		rc->active_pals++;
+		ret = uwb_radio_change_channel(rc, uwb_radio_select_channel(rc));
+	}
+
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(uwb_radio_start);
+
+/**
+ * uwb_radio_stop - request that the radio be stopped.
+ * @pal: the PAL making the request.
+ *
+ * Stops the radio if no other PAL is making use of it.
+ */
+void uwb_radio_stop(struct uwb_pal *pal)
+{
+	struct uwb_rc *rc = pal->rc;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+
+	if (pal->channel) {
+		rc->active_pals--;
+		uwb_radio_change_channel(rc, uwb_radio_select_channel(rc));
+		pal->channel = 0;
+	}
+
+	mutex_unlock(&rc->uwb_dev.mutex);
+}
+EXPORT_SYMBOL_GPL(uwb_radio_stop);
+
+/*
+ * uwb_radio_force_channel - force a specific channel to be used
+ * @rc: the radio controller.
+ * @channel: the channel to use; -1 to force the radio to stop; 0 to
+ *   use the default channel selection algorithm.
+ */
+int uwb_radio_force_channel(struct uwb_rc *rc, int channel)
+{
+	int ret = 0;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+
+	rc->beaconing_forced = channel;
+	ret = uwb_radio_change_channel(rc, uwb_radio_select_channel(rc));
+
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return ret;
+}
+
+/*
+ * uwb_radio_setup - setup the radio manager
+ * @rc: the radio controller.
+ *
+ * The radio controller is reset to ensure it's in a known state
+ * before it's used.
+ */
+int uwb_radio_setup(struct uwb_rc *rc)
+{
+	return uwb_rc_reset(rc);
+}
+
+/*
+ * uwb_radio_reset_state - reset any radio manager state
+ * @rc: the radio controller.
+ *
+ * All internal radio manager state is reset to values corresponding
+ * to a reset radio controller.
+ */
+void uwb_radio_reset_state(struct uwb_rc *rc)
+{
+	struct uwb_pal *pal;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+
+	list_for_each_entry(pal, &rc->pals, node) {
+		if (pal->channel) {
+			pal->channel = -1;
+			if (pal->channel_changed)
+				pal->channel_changed(pal, -1);
+		}
+	}
+
+	rc->beaconing = -1;
+	rc->scanning = -1;
+
+	mutex_unlock(&rc->uwb_dev.mutex);
+}
+
+/*
+ * uwb_radio_shutdown - shutdown the radio manager
+ * @rc: the radio controller.
+ *
+ * The radio controller is reset.
+ */
+void uwb_radio_shutdown(struct uwb_rc *rc)
+{
+	uwb_radio_reset_state(rc);
+	uwb_rc_reset(rc);
+}
diff --git a/drivers/uwb/reset.c b/drivers/uwb/reset.c
new file mode 100644
index 000000000..8b47c9cdd
--- /dev/null
+++ b/drivers/uwb/reset.c
@@ -0,0 +1,393 @@
+/*
+ * Ultra Wide Band
+ * UWB basic command support and radio reset
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME:
+ *
+ *  - docs
+ *
+ *  - Now we are serializing (using the uwb_dev->mutex) the command
+ *    execution; it should be parallelized as much as possible some
+ *    day.
+ */
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+/**
+ * Command result codes (WUSB1.0[T8-69])
+ */
+static
+const char *__strerror[] = {
+	"success",
+	"failure",
+	"hardware failure",
+	"no more slots",
+	"beacon is too large",
+	"invalid parameter",
+	"unsupported power level",
+	"time out (wa) or invalid ie data (whci)",
+	"beacon size exceeded",
+	"cancelled",
+	"invalid state",
+	"invalid size",
+	"ack not received",
+	"no more asie notification",
+};
+
+
+/** Return a string matching the given error code */
+const char *uwb_rc_strerror(unsigned code)
+{
+	if (code == 255)
+		return "time out";
+	if (code >= ARRAY_SIZE(__strerror))
+		return "unknown error";
+	return __strerror[code];
+}
+
+int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
+		     struct uwb_rccb *cmd, size_t cmd_size,
+		     u8 expected_type, u16 expected_event,
+		     uwb_rc_cmd_cb_f cb, void *arg)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_neh *neh;
+	int needtofree = 0;
+	int result;
+
+	uwb_dev_lock(&rc->uwb_dev);	/* Protect against rc->priv being removed */
+	if (rc->priv == NULL) {
+		uwb_dev_unlock(&rc->uwb_dev);
+		return -ESHUTDOWN;
+	}
+
+	if (rc->filter_cmd) {
+		needtofree = rc->filter_cmd(rc, &cmd, &cmd_size);
+		if (needtofree < 0 && needtofree != -ENOANO) {
+			dev_err(dev, "%s: filter error: %d\n",
+				cmd_name, needtofree);
+			uwb_dev_unlock(&rc->uwb_dev);
+			return needtofree;
+		}
+	}
+
+	neh = uwb_rc_neh_add(rc, cmd, expected_type, expected_event, cb, arg);
+	if (IS_ERR(neh)) {
+		result = PTR_ERR(neh);
+		uwb_dev_unlock(&rc->uwb_dev);
+		goto out;
+	}
+
+	result = rc->cmd(rc, cmd, cmd_size);
+	uwb_dev_unlock(&rc->uwb_dev);
+	if (result < 0)
+		uwb_rc_neh_rm(rc, neh);
+	else
+		uwb_rc_neh_arm(rc, neh);
+	uwb_rc_neh_put(neh);
+out:
+	if (needtofree == 1)
+		kfree(cmd);
+	return result < 0 ? result : 0;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_cmd_async);
+
+struct uwb_rc_cmd_done_params {
+	struct completion completion;
+	struct uwb_rceb *reply;
+	ssize_t reply_size;
+};
+
+static void uwb_rc_cmd_done(struct uwb_rc *rc, void *arg,
+			    struct uwb_rceb *reply, ssize_t reply_size)
+{
+	struct uwb_rc_cmd_done_params *p = (struct uwb_rc_cmd_done_params *)arg;
+
+	if (reply_size > 0) {
+		if (p->reply)
+			reply_size = min(p->reply_size, reply_size);
+		else
+			p->reply = kmalloc(reply_size, GFP_ATOMIC);
+
+		if (p->reply)
+			memcpy(p->reply, reply, reply_size);
+		else
+			reply_size = -ENOMEM;
+	}
+	p->reply_size = reply_size;
+	complete(&p->completion);
+}
+
+
+/**
+ * Generic function for issuing commands to the Radio Control Interface
+ *
+ * @rc:       UWB Radio Control descriptor
+ * @cmd_name: Name of the command being issued (for error messages)
+ * @cmd:      Pointer to rccb structure containing the command;
+ *            normally you embed this structure as the first member of
+ *            the full command structure.
+ * @cmd_size: Size of the whole command buffer pointed to by @cmd.
+ * @reply:    Pointer to where to store the reply
+ * @reply_size: @reply's size
+ * @expected_type: Expected type in the return event
+ * @expected_event: Expected event code in the return event
+ * @preply:   Here a pointer to where the event data is received will
+ *            be stored. Once done with the data, free with kfree().
+ *
+ * This function is generic; it works for commands that return a fixed
+ * and known size or for commands that return a variable amount of data.
+ *
+ * If a buffer is provided, that is used, although it could be chopped
+ * to the maximum size of the buffer. If the buffer is NULL, then one
+ * be allocated in *preply with the whole contents of the reply.
+ *
+ * @rc needs to be referenced
+ */
+static
+ssize_t __uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
+		     struct uwb_rccb *cmd, size_t cmd_size,
+		     struct uwb_rceb *reply, size_t reply_size,
+		     u8 expected_type, u16 expected_event,
+		     struct uwb_rceb **preply)
+{
+	ssize_t result = 0;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_cmd_done_params params;
+
+	init_completion(&params.completion);
+	params.reply = reply;
+	params.reply_size = reply_size;
+
+	result = uwb_rc_cmd_async(rc, cmd_name, cmd, cmd_size,
+				  expected_type, expected_event,
+				  uwb_rc_cmd_done, &params);
+	if (result)
+		return result;
+
+	wait_for_completion(&params.completion);
+
+	if (preply)
+		*preply = params.reply;
+
+	if (params.reply_size < 0)
+		dev_err(dev, "%s: confirmation event 0x%02x/%04x/%02x "
+			"reception failed: %d\n", cmd_name,
+			expected_type, expected_event, cmd->bCommandContext,
+			(int)params.reply_size);
+	return params.reply_size;
+}
+
+
+/**
+ * Generic function for issuing commands to the Radio Control Interface
+ *
+ * @rc:       UWB Radio Control descriptor
+ * @cmd_name: Name of the command being issued (for error messages)
+ * @cmd:      Pointer to rccb structure containing the command;
+ *            normally you embed this structure as the first member of
+ *            the full command structure.
+ * @cmd_size: Size of the whole command buffer pointed to by @cmd.
+ * @reply:    Pointer to the beginning of the confirmation event
+ *            buffer. Normally bigger than an 'struct hwarc_rceb'.
+ *            You need to fill out reply->bEventType and reply->wEvent (in
+ *            cpu order) as the function will use them to verify the
+ *            confirmation event.
+ * @reply_size: Size of the reply buffer
+ *
+ * The function checks that the length returned in the reply is at
+ * least as big as @reply_size; if not, it will be deemed an error and
+ * -EIO returned.
+ *
+ * @rc needs to be referenced
+ */
+ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
+		   struct uwb_rccb *cmd, size_t cmd_size,
+		   struct uwb_rceb *reply, size_t reply_size)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	ssize_t result;
+
+	result = __uwb_rc_cmd(rc, cmd_name,
+			      cmd, cmd_size, reply, reply_size,
+			      reply->bEventType, reply->wEvent, NULL);
+
+	if (result > 0 && result < reply_size) {
+		dev_err(dev, "%s: not enough data returned for decoding reply "
+			"(%zu bytes received vs at least %zu needed)\n",
+			cmd_name, result, reply_size);
+		result = -EIO;
+	}
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_cmd);
+
+
+/**
+ * Generic function for issuing commands to the Radio Control
+ * Interface that return an unknown amount of data
+ *
+ * @rc:       UWB Radio Control descriptor
+ * @cmd_name: Name of the command being issued (for error messages)
+ * @cmd:      Pointer to rccb structure containing the command;
+ *            normally you embed this structure as the first member of
+ *            the full command structure.
+ * @cmd_size: Size of the whole command buffer pointed to by @cmd.
+ * @expected_type: Expected type in the return event
+ * @expected_event: Expected event code in the return event
+ * @preply:   Here a pointer to where the event data is received will
+ *            be stored. Once done with the data, free with kfree().
+ *
+ * The function checks that the length returned in the reply is at
+ * least as big as a 'struct uwb_rceb *'; if not, it will be deemed an
+ * error and -EIO returned.
+ *
+ * @rc needs to be referenced
+ */
+ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name,
+		    struct uwb_rccb *cmd, size_t cmd_size,
+		    u8 expected_type, u16 expected_event,
+		    struct uwb_rceb **preply)
+{
+	return __uwb_rc_cmd(rc, cmd_name, cmd, cmd_size, NULL, 0,
+			    expected_type, expected_event, preply);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_vcmd);
+
+
+/**
+ * Reset a UWB Host Controller (and all radio settings)
+ *
+ * @rc:      Host Controller descriptor
+ * @returns: 0 if ok, < 0 errno code on error
+ *
+ * We put the command on kmalloc'ed memory as some arches cannot do
+ * USB from the stack. The reply event is copied from an stage buffer,
+ * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
+ */
+int uwb_rc_reset(struct uwb_rc *rc)
+{
+	int result = -ENOMEM;
+	struct uwb_rc_evt_confirm reply;
+	struct uwb_rccb *cmd;
+	size_t cmd_size = sizeof(*cmd);
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		goto error_kzalloc;
+	cmd->bCommandType = UWB_RC_CET_GENERAL;
+	cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET);
+	reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply.rceb.wEvent = UWB_RC_CMD_RESET;
+	result = uwb_rc_cmd(rc, "RESET", cmd, cmd_size,
+			    &reply.rceb, sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(&rc->uwb_dev.dev,
+			"RESET: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+		result = -EIO;
+	}
+error_cmd:
+	kfree(cmd);
+error_kzalloc:
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+int uwbd_msg_handle_reset(struct uwb_event *evt)
+{
+	struct uwb_rc *rc = evt->rc;
+	int ret;
+
+	dev_info(&rc->uwb_dev.dev, "resetting radio controller\n");
+	ret = rc->reset(rc);
+	if (ret < 0) {
+		dev_err(&rc->uwb_dev.dev, "failed to reset hardware: %d\n", ret);
+		goto error;
+	}
+	return 0;
+error:
+	/* Nothing can be done except try the reset again. Wait a bit
+	   to avoid reset loops during probe() or remove(). */
+	msleep(1000);
+	uwb_rc_reset_all(rc);
+	return ret;
+}
+
+/**
+ * uwb_rc_reset_all - request a reset of the radio controller and PALs
+ * @rc: the radio controller of the hardware device to be reset.
+ *
+ * The full hardware reset of the radio controller and all the PALs
+ * will be scheduled.
+ */
+void uwb_rc_reset_all(struct uwb_rc *rc)
+{
+	struct uwb_event *evt;
+
+	evt = kzalloc(sizeof(struct uwb_event), GFP_ATOMIC);
+	if (unlikely(evt == NULL))
+		return;
+
+	evt->rc = __uwb_rc_get(rc);	/* will be put by uwbd's uwbd_event_handle() */
+	evt->ts_jiffies = jiffies;
+	evt->type = UWB_EVT_TYPE_MSG;
+	evt->message = UWB_EVT_MSG_RESET;
+
+	uwbd_event_queue(evt);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_reset_all);
+
+void uwb_rc_pre_reset(struct uwb_rc *rc)
+{
+	rc->stop(rc);
+	uwbd_flush(rc);
+
+	uwb_radio_reset_state(rc);
+	uwb_rsv_remove_all(rc);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_pre_reset);
+
+int uwb_rc_post_reset(struct uwb_rc *rc)
+{
+	int ret;
+
+	ret = rc->start(rc);
+	if (ret)
+		goto out;
+	ret = uwb_rc_mac_addr_set(rc, &rc->uwb_dev.mac_addr);
+	if (ret)
+		goto out;
+	ret = uwb_rc_dev_addr_set(rc, &rc->uwb_dev.dev_addr);
+	if (ret)
+		goto out;
+out:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_post_reset);
diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c
new file mode 100644
index 000000000..fe25a8cc6
--- /dev/null
+++ b/drivers/uwb/rsv.c
@@ -0,0 +1,1011 @@
+/*
+ * UWB reservation management.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/uwb.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+static void uwb_rsv_timer(struct timer_list *t);
+
+static const char *rsv_states[] = {
+	[UWB_RSV_STATE_NONE]                 = "none            ",
+	[UWB_RSV_STATE_O_INITIATED]          = "o initiated     ",
+	[UWB_RSV_STATE_O_PENDING]            = "o pending       ",
+	[UWB_RSV_STATE_O_MODIFIED]           = "o modified      ",
+	[UWB_RSV_STATE_O_ESTABLISHED]        = "o established   ",
+	[UWB_RSV_STATE_O_TO_BE_MOVED]        = "o to be moved   ",
+	[UWB_RSV_STATE_O_MOVE_EXPANDING]     = "o move expanding",
+	[UWB_RSV_STATE_O_MOVE_COMBINING]     = "o move combining",
+	[UWB_RSV_STATE_O_MOVE_REDUCING]      = "o move reducing ",
+	[UWB_RSV_STATE_T_ACCEPTED]           = "t accepted      ",
+	[UWB_RSV_STATE_T_CONFLICT]           = "t conflict      ",
+	[UWB_RSV_STATE_T_PENDING]            = "t pending       ",
+	[UWB_RSV_STATE_T_DENIED]             = "t denied        ",
+	[UWB_RSV_STATE_T_RESIZED]            = "t resized       ",
+	[UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = "t expanding acc ",
+	[UWB_RSV_STATE_T_EXPANDING_CONFLICT] = "t expanding conf",
+	[UWB_RSV_STATE_T_EXPANDING_PENDING]  = "t expanding pend",
+	[UWB_RSV_STATE_T_EXPANDING_DENIED]   = "t expanding den ",
+};
+
+static const char *rsv_types[] = {
+	[UWB_DRP_TYPE_ALIEN_BP] = "alien-bp",
+	[UWB_DRP_TYPE_HARD]     = "hard",
+	[UWB_DRP_TYPE_SOFT]     = "soft",
+	[UWB_DRP_TYPE_PRIVATE]  = "private",
+	[UWB_DRP_TYPE_PCA]      = "pca",
+};
+
+bool uwb_rsv_has_two_drp_ies(struct uwb_rsv *rsv)
+{
+	static const bool has_two_drp_ies[] = {
+		[UWB_RSV_STATE_O_INITIATED]               = false,
+		[UWB_RSV_STATE_O_PENDING]                 = false,
+		[UWB_RSV_STATE_O_MODIFIED]                = false,
+		[UWB_RSV_STATE_O_ESTABLISHED]             = false,
+		[UWB_RSV_STATE_O_TO_BE_MOVED]             = false,
+		[UWB_RSV_STATE_O_MOVE_COMBINING]          = false,
+		[UWB_RSV_STATE_O_MOVE_REDUCING]           = false,
+		[UWB_RSV_STATE_O_MOVE_EXPANDING]          = true,
+		[UWB_RSV_STATE_T_ACCEPTED]                = false,
+		[UWB_RSV_STATE_T_CONFLICT]                = false,
+		[UWB_RSV_STATE_T_PENDING]                 = false,
+		[UWB_RSV_STATE_T_DENIED]                  = false,
+		[UWB_RSV_STATE_T_RESIZED]                 = false,
+		[UWB_RSV_STATE_T_EXPANDING_ACCEPTED]      = true,
+		[UWB_RSV_STATE_T_EXPANDING_CONFLICT]      = true,
+		[UWB_RSV_STATE_T_EXPANDING_PENDING]       = true,
+		[UWB_RSV_STATE_T_EXPANDING_DENIED]        = true,
+	};
+
+	return has_two_drp_ies[rsv->state];
+}
+
+/**
+ * uwb_rsv_state_str - return a string for a reservation state
+ * @state: the reservation state.
+ */
+const char *uwb_rsv_state_str(enum uwb_rsv_state state)
+{
+	if (state < UWB_RSV_STATE_NONE || state >= UWB_RSV_STATE_LAST)
+		return "unknown";
+	return rsv_states[state];
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_state_str);
+
+/**
+ * uwb_rsv_type_str - return a string for a reservation type
+ * @type: the reservation type
+ */
+const char *uwb_rsv_type_str(enum uwb_drp_type type)
+{
+	if (type < UWB_DRP_TYPE_ALIEN_BP || type > UWB_DRP_TYPE_PCA)
+		return "invalid";
+	return rsv_types[type];
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_type_str);
+
+void uwb_rsv_dump(char *text, struct uwb_rsv *rsv)
+{
+	struct device *dev = &rsv->rc->uwb_dev.dev;
+	struct uwb_dev_addr devaddr;
+	char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE];
+
+	uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr);
+	if (rsv->target.type == UWB_RSV_TARGET_DEV)
+		devaddr = rsv->target.dev->dev_addr;
+	else
+		devaddr = rsv->target.devaddr;
+	uwb_dev_addr_print(target, sizeof(target), &devaddr);
+
+	dev_dbg(dev, "rsv %s %s -> %s: %s\n",
+		text, owner, target, uwb_rsv_state_str(rsv->state));
+}
+
+static void uwb_rsv_release(struct kref *kref)
+{
+	struct uwb_rsv *rsv = container_of(kref, struct uwb_rsv, kref);
+
+	kfree(rsv);
+}
+
+void uwb_rsv_get(struct uwb_rsv *rsv)
+{
+	kref_get(&rsv->kref);
+}
+
+void uwb_rsv_put(struct uwb_rsv *rsv)
+{
+	kref_put(&rsv->kref, uwb_rsv_release);
+}
+
+/*
+ * Get a free stream index for a reservation.
+ *
+ * If the target is a DevAddr (e.g., a WUSB cluster reservation) then
+ * the stream is allocated from a pool of per-RC stream indexes,
+ * otherwise a unique stream index for the target is selected.
+ */
+static int uwb_rsv_get_stream(struct uwb_rsv *rsv)
+{
+	struct uwb_rc *rc = rsv->rc;
+	struct device *dev = &rc->uwb_dev.dev;
+	unsigned long *streams_bm;
+	int stream;
+
+	switch (rsv->target.type) {
+	case UWB_RSV_TARGET_DEV:
+		streams_bm = rsv->target.dev->streams;
+		break;
+	case UWB_RSV_TARGET_DEVADDR:
+		streams_bm = rc->uwb_dev.streams;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	stream = find_first_zero_bit(streams_bm, UWB_NUM_STREAMS);
+	if (stream >= UWB_NUM_STREAMS) {
+		dev_err(dev, "%s: no available stream found\n", __func__);
+		return -EBUSY;
+	}
+
+	rsv->stream = stream;
+	set_bit(stream, streams_bm);
+
+	dev_dbg(dev, "get stream %d\n", rsv->stream);
+
+	return 0;
+}
+
+static void uwb_rsv_put_stream(struct uwb_rsv *rsv)
+{
+	struct uwb_rc *rc = rsv->rc;
+	struct device *dev = &rc->uwb_dev.dev;
+	unsigned long *streams_bm;
+
+	switch (rsv->target.type) {
+	case UWB_RSV_TARGET_DEV:
+		streams_bm = rsv->target.dev->streams;
+		break;
+	case UWB_RSV_TARGET_DEVADDR:
+		streams_bm = rc->uwb_dev.streams;
+		break;
+	default:
+		return;
+	}
+
+	clear_bit(rsv->stream, streams_bm);
+
+	dev_dbg(dev, "put stream %d\n", rsv->stream);
+}
+
+void uwb_rsv_backoff_win_timer(struct timer_list *t)
+{
+	struct uwb_drp_backoff_win *bow = from_timer(bow, t, timer);
+	struct uwb_rc *rc = container_of(bow, struct uwb_rc, bow);
+	struct device *dev = &rc->uwb_dev.dev;
+
+	bow->can_reserve_extra_mases = true;
+	if (bow->total_expired <= 4) {
+		bow->total_expired++;
+	} else {
+		/* after 4 backoff window has expired we can exit from
+		 * the backoff procedure */
+		bow->total_expired = 0;
+		bow->window = UWB_DRP_BACKOFF_WIN_MIN >> 1;
+	}
+	dev_dbg(dev, "backoff_win_timer total_expired=%d, n=%d\n", bow->total_expired, bow->n);
+
+	/* try to relocate all the "to be moved" relocations */
+	uwb_rsv_handle_drp_avail_change(rc);
+}
+
+void uwb_rsv_backoff_win_increment(struct uwb_rc *rc)
+{
+	struct uwb_drp_backoff_win *bow = &rc->bow;
+	struct device *dev = &rc->uwb_dev.dev;
+	unsigned timeout_us;
+
+	dev_dbg(dev, "backoff_win_increment: window=%d\n", bow->window);
+
+	bow->can_reserve_extra_mases = false;
+
+	if((bow->window << 1) == UWB_DRP_BACKOFF_WIN_MAX)
+		return;
+
+	bow->window <<= 1;
+	bow->n = prandom_u32() & (bow->window - 1);
+	dev_dbg(dev, "new_window=%d, n=%d\n", bow->window, bow->n);
+
+	/* reset the timer associated variables */
+	timeout_us = bow->n * UWB_SUPERFRAME_LENGTH_US;
+	bow->total_expired = 0;
+	mod_timer(&bow->timer, jiffies + usecs_to_jiffies(timeout_us));
+}
+
+static void uwb_rsv_stroke_timer(struct uwb_rsv *rsv)
+{
+	int sframes = UWB_MAX_LOST_BEACONS;
+
+	/*
+	 * Multicast reservations can become established within 1
+	 * super frame and should not be terminated if no response is
+	 * received.
+	 */
+	if (rsv->state == UWB_RSV_STATE_NONE) {
+		sframes = 0;
+	} else if (rsv->is_multicast) {
+		if (rsv->state == UWB_RSV_STATE_O_INITIATED
+		    || rsv->state == UWB_RSV_STATE_O_MOVE_EXPANDING
+		    || rsv->state == UWB_RSV_STATE_O_MOVE_COMBINING
+		    || rsv->state == UWB_RSV_STATE_O_MOVE_REDUCING)
+			sframes = 1;
+		if (rsv->state == UWB_RSV_STATE_O_ESTABLISHED)
+			sframes = 0;
+
+	}
+
+	if (sframes > 0) {
+		/*
+		 * Add an additional 2 superframes to account for the
+		 * time to send the SET DRP IE command.
+		 */
+		unsigned timeout_us = (sframes + 2) * UWB_SUPERFRAME_LENGTH_US;
+		mod_timer(&rsv->timer, jiffies + usecs_to_jiffies(timeout_us));
+	} else
+		del_timer(&rsv->timer);
+}
+
+/*
+ * Update a reservations state, and schedule an update of the
+ * transmitted DRP IEs.
+ */
+static void uwb_rsv_state_update(struct uwb_rsv *rsv,
+				 enum uwb_rsv_state new_state)
+{
+	rsv->state = new_state;
+	rsv->ie_valid = false;
+
+	uwb_rsv_dump("SU", rsv);
+
+	uwb_rsv_stroke_timer(rsv);
+	uwb_rsv_sched_update(rsv->rc);
+}
+
+static void uwb_rsv_callback(struct uwb_rsv *rsv)
+{
+	if (rsv->callback)
+		rsv->callback(rsv);
+}
+
+void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state)
+{
+	struct uwb_rsv_move *mv = &rsv->mv;
+
+	if (rsv->state == new_state) {
+		switch (rsv->state) {
+		case UWB_RSV_STATE_O_ESTABLISHED:
+		case UWB_RSV_STATE_O_MOVE_EXPANDING:
+		case UWB_RSV_STATE_O_MOVE_COMBINING:
+		case UWB_RSV_STATE_O_MOVE_REDUCING:
+		case UWB_RSV_STATE_T_ACCEPTED:
+		case UWB_RSV_STATE_T_EXPANDING_ACCEPTED:
+		case UWB_RSV_STATE_T_RESIZED:
+		case UWB_RSV_STATE_NONE:
+			uwb_rsv_stroke_timer(rsv);
+			break;
+		default:
+			/* Expecting a state transition so leave timer
+			   as-is. */
+			break;
+		}
+		return;
+	}
+
+	uwb_rsv_dump("SC", rsv);
+
+	switch (new_state) {
+	case UWB_RSV_STATE_NONE:
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_NONE);
+		uwb_rsv_remove(rsv);
+		uwb_rsv_callback(rsv);
+		break;
+	case UWB_RSV_STATE_O_INITIATED:
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_INITIATED);
+		break;
+	case UWB_RSV_STATE_O_PENDING:
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_PENDING);
+		break;
+	case UWB_RSV_STATE_O_MODIFIED:
+		/* in the companion there are the MASes to drop */
+		bitmap_andnot(rsv->mas.bm, rsv->mas.bm, mv->companion_mas.bm, UWB_NUM_MAS);
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MODIFIED);
+		break;
+	case UWB_RSV_STATE_O_ESTABLISHED:
+		if (rsv->state == UWB_RSV_STATE_O_MODIFIED
+		    || rsv->state == UWB_RSV_STATE_O_MOVE_REDUCING) {
+			uwb_drp_avail_release(rsv->rc, &mv->companion_mas);
+			rsv->needs_release_companion_mas = false;
+		}
+		uwb_drp_avail_reserve(rsv->rc, &rsv->mas);
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+		uwb_rsv_callback(rsv);
+		break;
+	case UWB_RSV_STATE_O_MOVE_EXPANDING:
+		rsv->needs_release_companion_mas = true;
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING);
+		break;
+	case UWB_RSV_STATE_O_MOVE_COMBINING:
+		rsv->needs_release_companion_mas = false;
+		uwb_drp_avail_reserve(rsv->rc, &mv->companion_mas);
+		bitmap_or(rsv->mas.bm, rsv->mas.bm, mv->companion_mas.bm, UWB_NUM_MAS);
+		rsv->mas.safe   += mv->companion_mas.safe;
+		rsv->mas.unsafe += mv->companion_mas.unsafe;
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
+		break;
+	case UWB_RSV_STATE_O_MOVE_REDUCING:
+		bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS);
+		rsv->needs_release_companion_mas = true;
+		rsv->mas.safe   = mv->final_mas.safe;
+		rsv->mas.unsafe = mv->final_mas.unsafe;
+		bitmap_copy(rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS);
+		bitmap_copy(rsv->mas.unsafe_bm, mv->final_mas.unsafe_bm, UWB_NUM_MAS);
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
+		break;
+	case UWB_RSV_STATE_T_ACCEPTED:
+	case UWB_RSV_STATE_T_RESIZED:
+		rsv->needs_release_companion_mas = false;
+		uwb_drp_avail_reserve(rsv->rc, &rsv->mas);
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_ACCEPTED);
+		uwb_rsv_callback(rsv);
+		break;
+	case UWB_RSV_STATE_T_DENIED:
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_DENIED);
+		break;
+	case UWB_RSV_STATE_T_CONFLICT:
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_CONFLICT);
+		break;
+	case UWB_RSV_STATE_T_PENDING:
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_PENDING);
+		break;
+	case UWB_RSV_STATE_T_EXPANDING_ACCEPTED:
+		rsv->needs_release_companion_mas = true;
+		uwb_drp_avail_reserve(rsv->rc, &mv->companion_mas);
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_EXPANDING_ACCEPTED);
+		break;
+	default:
+		dev_err(&rsv->rc->uwb_dev.dev, "unhandled state: %s (%d)\n",
+			uwb_rsv_state_str(new_state), new_state);
+	}
+}
+
+static void uwb_rsv_handle_timeout_work(struct work_struct *work)
+{
+	struct uwb_rsv *rsv = container_of(work, struct uwb_rsv,
+					   handle_timeout_work);
+	struct uwb_rc *rc = rsv->rc;
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	uwb_rsv_dump("TO", rsv);
+
+	switch (rsv->state) {
+	case UWB_RSV_STATE_O_INITIATED:
+		if (rsv->is_multicast) {
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+			goto unlock;
+		}
+		break;
+	case UWB_RSV_STATE_O_MOVE_EXPANDING:
+		if (rsv->is_multicast) {
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
+			goto unlock;
+		}
+		break;
+	case UWB_RSV_STATE_O_MOVE_COMBINING:
+		if (rsv->is_multicast) {
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
+			goto unlock;
+		}
+		break;
+	case UWB_RSV_STATE_O_MOVE_REDUCING:
+		if (rsv->is_multicast) {
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+			goto unlock;
+		}
+		break;
+	case UWB_RSV_STATE_O_ESTABLISHED:
+		if (rsv->is_multicast)
+			goto unlock;
+		break;
+	case UWB_RSV_STATE_T_EXPANDING_ACCEPTED:
+		/*
+		 * The time out could be for the main or of the
+		 * companion DRP, assume it's for the companion and
+		 * drop that first.  A further time out is required to
+		 * drop the main.
+		 */
+		uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED);
+		uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas);
+		goto unlock;
+	case UWB_RSV_STATE_NONE:
+		goto unlock;
+	default:
+		break;
+	}
+
+	uwb_rsv_remove(rsv);
+
+unlock:
+	mutex_unlock(&rc->rsvs_mutex);
+}
+
+static struct uwb_rsv *uwb_rsv_alloc(struct uwb_rc *rc)
+{
+	struct uwb_rsv *rsv;
+
+	rsv = kzalloc(sizeof(struct uwb_rsv), GFP_KERNEL);
+	if (!rsv)
+		return NULL;
+
+	INIT_LIST_HEAD(&rsv->rc_node);
+	INIT_LIST_HEAD(&rsv->pal_node);
+	kref_init(&rsv->kref);
+	timer_setup(&rsv->timer, uwb_rsv_timer, 0);
+
+	rsv->rc = rc;
+	INIT_WORK(&rsv->handle_timeout_work, uwb_rsv_handle_timeout_work);
+
+	return rsv;
+}
+
+/**
+ * uwb_rsv_create - allocate and initialize a UWB reservation structure
+ * @rc: the radio controller
+ * @cb: callback to use when the reservation completes or terminates
+ * @pal_priv: data private to the PAL to be passed in the callback
+ *
+ * The callback is called when the state of the reservation changes from:
+ *
+ *   - pending to accepted
+ *   - pending to denined
+ *   - accepted to terminated
+ *   - pending to terminated
+ */
+struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb, void *pal_priv)
+{
+	struct uwb_rsv *rsv;
+
+	rsv = uwb_rsv_alloc(rc);
+	if (!rsv)
+		return NULL;
+
+	rsv->callback = cb;
+	rsv->pal_priv = pal_priv;
+
+	return rsv;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_create);
+
+void uwb_rsv_remove(struct uwb_rsv *rsv)
+{
+	uwb_rsv_dump("RM", rsv);
+
+	if (rsv->state != UWB_RSV_STATE_NONE)
+		uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+
+	if (rsv->needs_release_companion_mas)
+		uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas);
+	uwb_drp_avail_release(rsv->rc, &rsv->mas);
+
+	if (uwb_rsv_is_owner(rsv))
+		uwb_rsv_put_stream(rsv);
+
+	uwb_dev_put(rsv->owner);
+	if (rsv->target.type == UWB_RSV_TARGET_DEV)
+		uwb_dev_put(rsv->target.dev);
+
+	list_del_init(&rsv->rc_node);
+	uwb_rsv_put(rsv);
+}
+
+/**
+ * uwb_rsv_destroy - free a UWB reservation structure
+ * @rsv: the reservation to free
+ *
+ * The reservation must already be terminated.
+ */
+void uwb_rsv_destroy(struct uwb_rsv *rsv)
+{
+	uwb_rsv_put(rsv);
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_destroy);
+
+/**
+ * usb_rsv_establish - start a reservation establishment
+ * @rsv: the reservation
+ *
+ * The PAL should fill in @rsv's owner, target, type, max_mas,
+ * min_mas, max_interval and is_multicast fields.  If the target is a
+ * uwb_dev it must be referenced.
+ *
+ * The reservation's callback will be called when the reservation is
+ * accepted, denied or times out.
+ */
+int uwb_rsv_establish(struct uwb_rsv *rsv)
+{
+	struct uwb_rc *rc = rsv->rc;
+	struct uwb_mas_bm available;
+	struct device *dev = &rc->uwb_dev.dev;
+	int ret;
+
+	mutex_lock(&rc->rsvs_mutex);
+	ret = uwb_rsv_get_stream(rsv);
+	if (ret) {
+		dev_err(dev, "%s: uwb_rsv_get_stream failed: %d\n",
+			__func__, ret);
+		goto out;
+	}
+
+	rsv->tiebreaker = prandom_u32() & 1;
+	/* get available mas bitmap */
+	uwb_drp_available(rc, &available);
+
+	ret = uwb_rsv_find_best_allocation(rsv, &available, &rsv->mas);
+	if (ret == UWB_RSV_ALLOC_NOT_FOUND) {
+		ret = -EBUSY;
+		uwb_rsv_put_stream(rsv);
+		dev_err(dev, "%s: uwb_rsv_find_best_allocation failed: %d\n",
+			__func__, ret);
+		goto out;
+	}
+
+	ret = uwb_drp_avail_reserve_pending(rc, &rsv->mas);
+	if (ret != 0) {
+		uwb_rsv_put_stream(rsv);
+		dev_err(dev, "%s: uwb_drp_avail_reserve_pending failed: %d\n",
+			__func__, ret);
+		goto out;
+	}
+
+	uwb_rsv_get(rsv);
+	list_add_tail(&rsv->rc_node, &rc->reservations);
+	rsv->owner = &rc->uwb_dev;
+	uwb_dev_get(rsv->owner);
+	uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_INITIATED);
+out:
+	mutex_unlock(&rc->rsvs_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_establish);
+
+/**
+ * uwb_rsv_modify - modify an already established reservation
+ * @rsv: the reservation to modify
+ * @max_mas: new maximum MAS to reserve
+ * @min_mas: new minimum MAS to reserve
+ * @max_interval: new max_interval to use
+ *
+ * FIXME: implement this once there are PALs that use it.
+ */
+int uwb_rsv_modify(struct uwb_rsv *rsv, int max_mas, int min_mas, int max_interval)
+{
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_modify);
+
+/*
+ * move an already established reservation (rc->rsvs_mutex must to be
+ * taken when tis function is called)
+ */
+int uwb_rsv_try_move(struct uwb_rsv *rsv, struct uwb_mas_bm *available)
+{
+	struct uwb_rc *rc = rsv->rc;
+	struct uwb_drp_backoff_win *bow = &rc->bow;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rsv_move *mv;
+	int ret = 0;
+
+	if (bow->can_reserve_extra_mases == false)
+		return -EBUSY;
+
+	mv = &rsv->mv;
+
+	if (uwb_rsv_find_best_allocation(rsv, available, &mv->final_mas) == UWB_RSV_ALLOC_FOUND) {
+
+		if (!bitmap_equal(rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS)) {
+			/* We want to move the reservation */
+			bitmap_andnot(mv->companion_mas.bm, mv->final_mas.bm, rsv->mas.bm, UWB_NUM_MAS);
+			uwb_drp_avail_reserve_pending(rc, &mv->companion_mas);
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING);
+		}
+	} else {
+		dev_dbg(dev, "new allocation not found\n");
+	}
+
+	return ret;
+}
+
+/* It will try to move every reservation in state O_ESTABLISHED giving
+ * to the MAS allocator algorithm an availability that is the real one
+ * plus the allocation already established from the reservation. */
+void uwb_rsv_handle_drp_avail_change(struct uwb_rc *rc)
+{
+	struct uwb_drp_backoff_win *bow = &rc->bow;
+	struct uwb_rsv *rsv;
+	struct uwb_mas_bm mas;
+
+	if (bow->can_reserve_extra_mases == false)
+		return;
+
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		if (rsv->state == UWB_RSV_STATE_O_ESTABLISHED ||
+		    rsv->state == UWB_RSV_STATE_O_TO_BE_MOVED) {
+			uwb_drp_available(rc, &mas);
+			bitmap_or(mas.bm, mas.bm, rsv->mas.bm, UWB_NUM_MAS);
+			uwb_rsv_try_move(rsv, &mas);
+		}
+	}
+
+}
+
+/**
+ * uwb_rsv_terminate - terminate an established reservation
+ * @rsv: the reservation to terminate
+ *
+ * A reservation is terminated by removing the DRP IE from the beacon,
+ * the other end will consider the reservation to be terminated when
+ * it does not see the DRP IE for at least mMaxLostBeacons.
+ *
+ * If applicable, the reference to the target uwb_dev will be released.
+ */
+void uwb_rsv_terminate(struct uwb_rsv *rsv)
+{
+	struct uwb_rc *rc = rsv->rc;
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	if (rsv->state != UWB_RSV_STATE_NONE)
+		uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+
+	mutex_unlock(&rc->rsvs_mutex);
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_terminate);
+
+/**
+ * uwb_rsv_accept - accept a new reservation from a peer
+ * @rsv:      the reservation
+ * @cb:       call back for reservation changes
+ * @pal_priv: data to be passed in the above call back
+ *
+ * Reservation requests from peers are denied unless a PAL accepts it
+ * by calling this function.
+ *
+ * The PAL call uwb_rsv_destroy() for all accepted reservations before
+ * calling uwb_pal_unregister().
+ */
+void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv)
+{
+	uwb_rsv_get(rsv);
+
+	rsv->callback = cb;
+	rsv->pal_priv = pal_priv;
+	rsv->state    = UWB_RSV_STATE_T_ACCEPTED;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_accept);
+
+/*
+ * Is a received DRP IE for this reservation?
+ */
+static bool uwb_rsv_match(struct uwb_rsv *rsv, struct uwb_dev *src,
+			  struct uwb_ie_drp *drp_ie)
+{
+	struct uwb_dev_addr *rsv_src;
+	int stream;
+
+	stream = uwb_ie_drp_stream_index(drp_ie);
+
+	if (rsv->stream != stream)
+		return false;
+
+	switch (rsv->target.type) {
+	case UWB_RSV_TARGET_DEVADDR:
+		return rsv->stream == stream;
+	case UWB_RSV_TARGET_DEV:
+		if (uwb_ie_drp_owner(drp_ie))
+			rsv_src = &rsv->owner->dev_addr;
+		else
+			rsv_src = &rsv->target.dev->dev_addr;
+		return uwb_dev_addr_cmp(&src->dev_addr, rsv_src) == 0;
+	}
+	return false;
+}
+
+static struct uwb_rsv *uwb_rsv_new_target(struct uwb_rc *rc,
+					  struct uwb_dev *src,
+					  struct uwb_ie_drp *drp_ie)
+{
+	struct uwb_rsv *rsv;
+	struct uwb_pal *pal;
+	enum uwb_rsv_state state;
+
+	rsv = uwb_rsv_alloc(rc);
+	if (!rsv)
+		return NULL;
+
+	rsv->rc          = rc;
+	rsv->owner       = src;
+	uwb_dev_get(rsv->owner);
+	rsv->target.type = UWB_RSV_TARGET_DEV;
+	rsv->target.dev  = &rc->uwb_dev;
+	uwb_dev_get(&rc->uwb_dev);
+	rsv->type        = uwb_ie_drp_type(drp_ie);
+	rsv->stream      = uwb_ie_drp_stream_index(drp_ie);
+	uwb_drp_ie_to_bm(&rsv->mas, drp_ie);
+
+	/*
+	 * See if any PALs are interested in this reservation. If not,
+	 * deny the request.
+	 */
+	rsv->state = UWB_RSV_STATE_T_DENIED;
+	mutex_lock(&rc->uwb_dev.mutex);
+	list_for_each_entry(pal, &rc->pals, node) {
+		if (pal->new_rsv)
+			pal->new_rsv(pal, rsv);
+		if (rsv->state == UWB_RSV_STATE_T_ACCEPTED)
+			break;
+	}
+	mutex_unlock(&rc->uwb_dev.mutex);
+
+	list_add_tail(&rsv->rc_node, &rc->reservations);
+	state = rsv->state;
+	rsv->state = UWB_RSV_STATE_NONE;
+
+	/* FIXME: do something sensible here */
+	if (state == UWB_RSV_STATE_T_ACCEPTED
+	    && uwb_drp_avail_reserve_pending(rc, &rsv->mas) == -EBUSY) {
+		/* FIXME: do something sensible here */
+	} else {
+		uwb_rsv_set_state(rsv, state);
+	}
+
+	return rsv;
+}
+
+/**
+ * uwb_rsv_get_usable_mas - get the bitmap of the usable MAS of a reservations
+ * @rsv: the reservation.
+ * @mas: returns the available MAS.
+ *
+ * The usable MAS of a reservation may be less than the negotiated MAS
+ * if alien BPs are present.
+ */
+void uwb_rsv_get_usable_mas(struct uwb_rsv *rsv, struct uwb_mas_bm *mas)
+{
+	bitmap_zero(mas->bm, UWB_NUM_MAS);
+	bitmap_andnot(mas->bm, rsv->mas.bm, rsv->rc->cnflt_alien_bitmap.bm, UWB_NUM_MAS);
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_get_usable_mas);
+
+/**
+ * uwb_rsv_find - find a reservation for a received DRP IE.
+ * @rc: the radio controller
+ * @src: source of the DRP IE
+ * @drp_ie: the DRP IE
+ *
+ * If the reservation cannot be found and the DRP IE is from a peer
+ * attempting to establish a new reservation, create a new reservation
+ * and add it to the list.
+ */
+struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src,
+			     struct uwb_ie_drp *drp_ie)
+{
+	struct uwb_rsv *rsv;
+
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		if (uwb_rsv_match(rsv, src, drp_ie))
+			return rsv;
+	}
+
+	if (uwb_ie_drp_owner(drp_ie))
+		return uwb_rsv_new_target(rc, src, drp_ie);
+
+	return NULL;
+}
+
+/*
+ * Go through all the reservations and check for timeouts and (if
+ * necessary) update their DRP IEs.
+ *
+ * FIXME: look at building the SET_DRP_IE command here rather than
+ * having to rescan the list in uwb_rc_send_all_drp_ie().
+ */
+static bool uwb_rsv_update_all(struct uwb_rc *rc)
+{
+	struct uwb_rsv *rsv, *t;
+	bool ie_updated = false;
+
+	list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+		if (!rsv->ie_valid) {
+			uwb_drp_ie_update(rsv);
+			ie_updated = true;
+		}
+	}
+
+	return ie_updated;
+}
+
+void uwb_rsv_queue_update(struct uwb_rc *rc)
+{
+	unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE;
+
+	queue_delayed_work(rc->rsv_workq, &rc->rsv_update_work, usecs_to_jiffies(delay_us));
+}
+
+/**
+ * uwb_rsv_sched_update - schedule an update of the DRP IEs
+ * @rc: the radio controller.
+ *
+ * To improve performance and ensure correctness with [ECMA-368] the
+ * number of SET-DRP-IE commands that are done are limited.
+ *
+ * DRP IEs update come from two sources: DRP events from the hardware
+ * which all occur at the beginning of the superframe ('syncronous'
+ * events) and reservation establishment/termination requests from
+ * PALs or timers ('asynchronous' events).
+ *
+ * A delayed work ensures that all the synchronous events result in
+ * one SET-DRP-IE command.
+ *
+ * Additional logic (the set_drp_ie_pending and rsv_updated_postponed
+ * flags) will prevent an asynchrous event starting a SET-DRP-IE
+ * command if one is currently awaiting a response.
+ *
+ * FIXME: this does leave a window where an asynchrous event can delay
+ * the SET-DRP-IE for a synchronous event by one superframe.
+ */
+void uwb_rsv_sched_update(struct uwb_rc *rc)
+{
+	spin_lock_irq(&rc->rsvs_lock);
+	if (!delayed_work_pending(&rc->rsv_update_work)) {
+		if (rc->set_drp_ie_pending > 0) {
+			rc->set_drp_ie_pending++;
+			goto unlock;
+		}
+		uwb_rsv_queue_update(rc);
+	}
+unlock:
+	spin_unlock_irq(&rc->rsvs_lock);
+}
+
+/*
+ * Update DRP IEs and, if necessary, the DRP Availability IE and send
+ * the updated IEs to the radio controller.
+ */
+static void uwb_rsv_update_work(struct work_struct *work)
+{
+	struct uwb_rc *rc = container_of(work, struct uwb_rc,
+					 rsv_update_work.work);
+	bool ie_updated;
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	ie_updated = uwb_rsv_update_all(rc);
+
+	if (!rc->drp_avail.ie_valid) {
+		uwb_drp_avail_ie_update(rc);
+		ie_updated = true;
+	}
+
+	if (ie_updated && (rc->set_drp_ie_pending == 0))
+		uwb_rc_send_all_drp_ie(rc);
+
+	mutex_unlock(&rc->rsvs_mutex);
+}
+
+static void uwb_rsv_alien_bp_work(struct work_struct *work)
+{
+	struct uwb_rc *rc = container_of(work, struct uwb_rc,
+					 rsv_alien_bp_work.work);
+	struct uwb_rsv *rsv;
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		if (rsv->type != UWB_DRP_TYPE_ALIEN_BP) {
+			uwb_rsv_callback(rsv);
+		}
+	}
+
+	mutex_unlock(&rc->rsvs_mutex);
+}
+
+static void uwb_rsv_timer(struct timer_list *t)
+{
+	struct uwb_rsv *rsv = from_timer(rsv, t, timer);
+
+	queue_work(rsv->rc->rsv_workq, &rsv->handle_timeout_work);
+}
+
+/**
+ * uwb_rsv_remove_all - remove all reservations
+ * @rc: the radio controller
+ *
+ * A DRP IE update is not done.
+ */
+void uwb_rsv_remove_all(struct uwb_rc *rc)
+{
+	struct uwb_rsv *rsv, *t;
+
+	mutex_lock(&rc->rsvs_mutex);
+	list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+		if (rsv->state != UWB_RSV_STATE_NONE)
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+		del_timer_sync(&rsv->timer);
+	}
+	/* Cancel any postponed update. */
+	rc->set_drp_ie_pending = 0;
+	mutex_unlock(&rc->rsvs_mutex);
+
+	cancel_delayed_work_sync(&rc->rsv_update_work);
+	flush_workqueue(rc->rsv_workq);
+
+	mutex_lock(&rc->rsvs_mutex);
+	list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+		uwb_rsv_remove(rsv);
+	}
+	mutex_unlock(&rc->rsvs_mutex);
+}
+
+void uwb_rsv_init(struct uwb_rc *rc)
+{
+	INIT_LIST_HEAD(&rc->reservations);
+	INIT_LIST_HEAD(&rc->cnflt_alien_list);
+	mutex_init(&rc->rsvs_mutex);
+	spin_lock_init(&rc->rsvs_lock);
+	INIT_DELAYED_WORK(&rc->rsv_update_work, uwb_rsv_update_work);
+	INIT_DELAYED_WORK(&rc->rsv_alien_bp_work, uwb_rsv_alien_bp_work);
+	rc->bow.can_reserve_extra_mases = true;
+	rc->bow.total_expired = 0;
+	rc->bow.window = UWB_DRP_BACKOFF_WIN_MIN >> 1;
+	timer_setup(&rc->bow.timer, uwb_rsv_backoff_win_timer, 0);
+
+	bitmap_complement(rc->uwb_dev.streams, rc->uwb_dev.streams, UWB_NUM_STREAMS);
+}
+
+int uwb_rsv_setup(struct uwb_rc *rc)
+{
+	char name[16];
+
+	snprintf(name, sizeof(name), "%s_rsvd", dev_name(&rc->uwb_dev.dev));
+	rc->rsv_workq = create_singlethread_workqueue(name);
+	if (rc->rsv_workq == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+
+void uwb_rsv_cleanup(struct uwb_rc *rc)
+{
+	uwb_rsv_remove_all(rc);
+	destroy_workqueue(rc->rsv_workq);
+}
diff --git a/drivers/uwb/scan.c b/drivers/uwb/scan.c
new file mode 100644
index 000000000..cbb6a5e70
--- /dev/null
+++ b/drivers/uwb/scan.c
@@ -0,0 +1,135 @@
+/*
+ * Ultra Wide Band
+ * Scanning management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ *
+ * FIXME: docs
+ * FIXME: there are issues here on how BEACON and SCAN on USB RCI deal
+ *        with each other. Currently seems that START_BEACON while
+ *        SCAN_ONLY will cancel the scan, so we need to update the
+ *        state here. Clarification request sent by email on
+ *        10/05/2005.
+ *        10/28/2005 No clear answer heard--maybe we'll hack the API
+ *                   so that when we start beaconing, if the HC is
+ *                   scanning in a mode not compatible with beaconing
+ *                   we just fail.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include "uwb-internal.h"
+
+
+/**
+ * Start/stop scanning in a radio controller
+ *
+ * @rc:      UWB Radio Controller
+ * @channel: Channel to scan; encodings in WUSB1.0[Table 5.12]
+ * @type:    Type of scanning to do.
+ * @bpst_offset: value at which to start scanning (if type ==
+ *                UWB_SCAN_ONLY_STARTTIME)
+ * @returns: 0 if ok, < 0 errno code on error
+ *
+ * We put the command on kmalloc'ed memory as some arches cannot do
+ * USB from the stack. The reply event is copied from an stage buffer,
+ * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
+ */
+int uwb_rc_scan(struct uwb_rc *rc,
+		unsigned channel, enum uwb_scan_type type,
+		unsigned bpst_offset)
+{
+	int result;
+	struct uwb_rc_cmd_scan *cmd;
+	struct uwb_rc_evt_confirm reply;
+
+	result = -ENOMEM;
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		goto error_kzalloc;
+	mutex_lock(&rc->uwb_dev.mutex);
+	cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+	cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SCAN);
+	cmd->bChannelNumber = channel;
+	cmd->bScanState = type;
+	cmd->wStartTime = cpu_to_le16(bpst_offset);
+	reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply.rceb.wEvent = UWB_RC_CMD_SCAN;
+	result = uwb_rc_cmd(rc, "SCAN", &cmd->rccb, sizeof(*cmd),
+			    &reply.rceb, sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(&rc->uwb_dev.dev,
+			"SCAN: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+		result = -EIO;
+		goto error_cmd;
+	}
+	rc->scanning = channel;
+	rc->scan_type = type;
+error_cmd:
+	mutex_unlock(&rc->uwb_dev.mutex);
+	kfree(cmd);
+error_kzalloc:
+	return result;
+}
+
+/*
+ * Print scanning state
+ */
+static ssize_t uwb_rc_scan_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	ssize_t result;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	result = sprintf(buf, "%d %d\n", rc->scanning, rc->scan_type);
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+/*
+ *
+ */
+static ssize_t uwb_rc_scan_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	unsigned channel;
+	unsigned type;
+	unsigned bpst_offset = 0;
+	ssize_t result = -EINVAL;
+
+	result = sscanf(buf, "%u %u %u\n", &channel, &type, &bpst_offset);
+	if (result >= 2 && type < UWB_SCAN_TOP)
+		result = uwb_rc_scan(rc, channel, type, bpst_offset);
+
+	return result < 0 ? result : size;
+}
+
+/** Radio Control sysfs interface (declaration) */
+DEVICE_ATTR(scan, S_IRUGO | S_IWUSR, uwb_rc_scan_show, uwb_rc_scan_store);
diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c
new file mode 100644
index 000000000..c85714051
--- /dev/null
+++ b/drivers/uwb/umc-bus.c
@@ -0,0 +1,212 @@
+/*
+ * Bus for UWB Multi-interface Controller capabilities.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/workqueue.h>
+#include <linux/module.h>
+#include <linux/uwb/umc.h>
+#include <linux/pci.h>
+
+static int umc_bus_pre_reset_helper(struct device *dev, void *data)
+{
+	int ret = 0;
+
+	if (dev->driver) {
+		struct umc_dev *umc = to_umc_dev(dev);
+		struct umc_driver *umc_drv = to_umc_driver(dev->driver);
+
+		if (umc_drv->pre_reset)
+			ret = umc_drv->pre_reset(umc);
+		else
+			device_release_driver(dev);
+	}
+	return ret;
+}
+
+static int umc_bus_post_reset_helper(struct device *dev, void *data)
+{
+	int ret = 0;
+
+	if (dev->driver) {
+		struct umc_dev *umc = to_umc_dev(dev);
+		struct umc_driver *umc_drv = to_umc_driver(dev->driver);
+
+		if (umc_drv->post_reset)
+			ret = umc_drv->post_reset(umc);
+	} else
+		ret = device_attach(dev);
+
+	return ret;
+}
+
+/**
+ * umc_controller_reset - reset the whole UMC controller
+ * @umc: the UMC device for the radio controller.
+ *
+ * Drivers or all capabilities of the controller will have their
+ * pre_reset methods called or be unbound from their device.  Then all
+ * post_reset methods will be called or the drivers will be rebound.
+ *
+ * Radio controllers must provide pre_reset and post_reset methods and
+ * reset the hardware in their start method.
+ *
+ * If this is called while a probe() or remove() is in progress it
+ * will return -EAGAIN and not perform the reset.
+ */
+int umc_controller_reset(struct umc_dev *umc)
+{
+	struct device *parent = umc->dev.parent;
+	int ret = 0;
+
+	if (!device_trylock(parent))
+		return -EAGAIN;
+	ret = device_for_each_child(parent, parent, umc_bus_pre_reset_helper);
+	if (ret >= 0)
+		ret = device_for_each_child(parent, parent, umc_bus_post_reset_helper);
+	device_unlock(parent);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(umc_controller_reset);
+
+/**
+ * umc_match_pci_id - match a UMC driver to a UMC device's parent PCI device.
+ * @umc_drv: umc driver with match_data pointing to a zero-terminated
+ * table of pci_device_id's.
+ * @umc: umc device whose parent is to be matched.
+ */
+int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc)
+{
+	const struct pci_device_id *id_table = umc_drv->match_data;
+	struct pci_dev *pci;
+
+	if (!dev_is_pci(umc->dev.parent))
+		return 0;
+
+	pci = to_pci_dev(umc->dev.parent);
+	return pci_match_id(id_table, pci) != NULL;
+}
+EXPORT_SYMBOL_GPL(umc_match_pci_id);
+
+static int umc_bus_rescan_helper(struct device *dev, void *data)
+{
+	int ret = 0;
+
+	if (!dev->driver)
+		ret = device_attach(dev);
+
+	return ret;
+}
+
+static void umc_bus_rescan(struct device *parent)
+{
+	int err;
+
+	/*
+	 * We can't use bus_rescan_devices() here as it deadlocks when
+	 * it tries to retake the dev->parent semaphore.
+	 */
+	err = device_for_each_child(parent, NULL, umc_bus_rescan_helper);
+	if (err < 0)
+		printk(KERN_WARNING "%s: rescan of bus failed: %d\n",
+		       KBUILD_MODNAME, err);
+}
+
+static int umc_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct umc_dev *umc = to_umc_dev(dev);
+	struct umc_driver *umc_driver = to_umc_driver(drv);
+
+	if (umc->cap_id == umc_driver->cap_id) {
+		if (umc_driver->match)
+			return umc_driver->match(umc_driver, umc);
+		else
+			return 1;
+	}
+	return 0;
+}
+
+static int umc_device_probe(struct device *dev)
+{
+	struct umc_dev *umc;
+	struct umc_driver *umc_driver;
+	int err;
+
+	umc_driver = to_umc_driver(dev->driver);
+	umc = to_umc_dev(dev);
+
+	get_device(dev);
+	err = umc_driver->probe(umc);
+	if (err)
+		put_device(dev);
+	else
+		umc_bus_rescan(dev->parent);
+
+	return err;
+}
+
+static int umc_device_remove(struct device *dev)
+{
+	struct umc_dev *umc;
+	struct umc_driver *umc_driver;
+
+	umc_driver = to_umc_driver(dev->driver);
+	umc = to_umc_dev(dev);
+
+	umc_driver->remove(umc);
+	put_device(dev);
+	return 0;
+}
+
+static ssize_t capability_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct umc_dev *umc = to_umc_dev(dev);
+
+	return sprintf(buf, "0x%02x\n", umc->cap_id);
+}
+static DEVICE_ATTR_RO(capability_id);
+
+static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct umc_dev *umc = to_umc_dev(dev);
+
+	return sprintf(buf, "0x%04x\n", umc->version);
+}
+static DEVICE_ATTR_RO(version);
+
+static struct attribute *umc_dev_attrs[] = {
+	&dev_attr_capability_id.attr,
+	&dev_attr_version.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(umc_dev);
+
+struct bus_type umc_bus_type = {
+	.name		= "umc",
+	.match		= umc_bus_match,
+	.probe		= umc_device_probe,
+	.remove		= umc_device_remove,
+	.dev_groups	= umc_dev_groups,
+};
+EXPORT_SYMBOL_GPL(umc_bus_type);
+
+static int __init umc_bus_init(void)
+{
+	return bus_register(&umc_bus_type);
+}
+module_init(umc_bus_init);
+
+static void __exit umc_bus_exit(void)
+{
+	bus_unregister(&umc_bus_type);
+}
+module_exit(umc_bus_exit);
+
+MODULE_DESCRIPTION("UWB Multi-interface Controller capability bus");
+MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/umc-dev.c b/drivers/uwb/umc-dev.c
new file mode 100644
index 000000000..7b0b268e0
--- /dev/null
+++ b/drivers/uwb/umc-dev.c
@@ -0,0 +1,95 @@
+/*
+ * UWB Multi-interface Controller device management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/uwb/umc.h>
+
+static void umc_device_release(struct device *dev)
+{
+	struct umc_dev *umc = to_umc_dev(dev);
+
+	kfree(umc);
+}
+
+/**
+ * umc_device_create - allocate a child UMC device
+ * @parent: parent of the new UMC device.
+ * @n:      index of the new device.
+ *
+ * The new UMC device will have a bus ID of the parent with '-n'
+ * appended.
+ */
+struct umc_dev *umc_device_create(struct device *parent, int n)
+{
+	struct umc_dev *umc;
+
+	umc = kzalloc(sizeof(struct umc_dev), GFP_KERNEL);
+	if (umc) {
+		dev_set_name(&umc->dev, "%s-%d", dev_name(parent), n);
+		umc->dev.parent  = parent;
+		umc->dev.bus     = &umc_bus_type;
+		umc->dev.release = umc_device_release;
+
+		umc->dev.dma_mask = parent->dma_mask;
+	}
+	return umc;
+}
+EXPORT_SYMBOL_GPL(umc_device_create);
+
+/**
+ * umc_device_register - register a UMC device
+ * @umc: pointer to the UMC device
+ *
+ * The memory resource for the UMC device is acquired and the device
+ * registered with the system.
+ */
+int umc_device_register(struct umc_dev *umc)
+{
+	int err;
+
+	err = request_resource(umc->resource.parent, &umc->resource);
+	if (err < 0) {
+		dev_err(&umc->dev, "can't allocate resource range %pR: %d\n",
+			&umc->resource, err);
+		goto error_request_resource;
+	}
+
+	err = device_register(&umc->dev);
+	if (err < 0)
+		goto error_device_register;
+	return 0;
+
+error_device_register:
+	put_device(&umc->dev);
+	release_resource(&umc->resource);
+error_request_resource:
+	return err;
+}
+EXPORT_SYMBOL_GPL(umc_device_register);
+
+/**
+ * umc_device_unregister - unregister a UMC device
+ * @umc: pointer to the UMC device
+ *
+ * First we unregister the device, make sure the driver can do it's
+ * resource release thing and then we try to release any left over
+ * resources. We take a ref to the device, to make sure it doesn't
+ * disappear under our feet.
+ */
+void umc_device_unregister(struct umc_dev *umc)
+{
+	struct device *dev;
+	if (!umc)
+		return;
+	dev = get_device(&umc->dev);
+	device_unregister(&umc->dev);
+	release_resource(&umc->resource);
+	put_device(dev);
+}
+EXPORT_SYMBOL_GPL(umc_device_unregister);
diff --git a/drivers/uwb/umc-drv.c b/drivers/uwb/umc-drv.c
new file mode 100644
index 000000000..26d0ae181
--- /dev/null
+++ b/drivers/uwb/umc-drv.c
@@ -0,0 +1,32 @@
+/*
+ * UWB Multi-interface Controller driver management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/uwb/umc.h>
+
+int __umc_driver_register(struct umc_driver *umc_drv, struct module *module,
+			  const char *mod_name)
+{
+	umc_drv->driver.name     = umc_drv->name;
+	umc_drv->driver.owner    = module;
+	umc_drv->driver.mod_name = mod_name;
+	umc_drv->driver.bus      = &umc_bus_type;
+
+	return driver_register(&umc_drv->driver);
+}
+EXPORT_SYMBOL_GPL(__umc_driver_register);
+
+/**
+ * umc_driver_register - unregister a UMC capabiltity driver.
+ * @umc_drv:  pointer to the driver.
+ */
+void umc_driver_unregister(struct umc_driver *umc_drv)
+{
+	driver_unregister(&umc_drv->driver);
+}
+EXPORT_SYMBOL_GPL(umc_driver_unregister);
diff --git a/drivers/uwb/uwb-debug.c b/drivers/uwb/uwb-debug.c
new file mode 100644
index 000000000..f1622bae1
--- /dev/null
+++ b/drivers/uwb/uwb-debug.c
@@ -0,0 +1,369 @@
+/*
+ * Ultra Wide Band
+ * Debug support
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: doc
+ */
+
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+#include <linux/uwb/debug-cmd.h>
+
+#include "uwb-internal.h"
+
+/*
+ * Debug interface
+ *
+ * Per radio controller debugfs files (in uwb/uwbN/):
+ *
+ * command: Flexible command interface (see <linux/uwb/debug-cmd.h>).
+ *
+ * reservations: information on reservations.
+ *
+ * accept: Set to true (Y or 1) to accept reservation requests from
+ * peers.
+ *
+ * drp_avail: DRP availability information.
+ */
+
+struct uwb_dbg {
+	struct uwb_pal pal;
+
+	bool accept;
+	struct list_head rsvs;
+
+	struct dentry *root_d;
+	struct dentry *command_f;
+	struct dentry *reservations_f;
+	struct dentry *accept_f;
+	struct dentry *drp_avail_f;
+	spinlock_t list_lock;
+};
+
+static struct dentry *root_dir;
+
+static void uwb_dbg_rsv_cb(struct uwb_rsv *rsv)
+{
+	struct uwb_dbg *dbg = rsv->pal_priv;
+
+	uwb_rsv_dump("debug", rsv);
+
+	if (rsv->state == UWB_RSV_STATE_NONE) {
+		spin_lock(&dbg->list_lock);
+		list_del(&rsv->pal_node);
+		spin_unlock(&dbg->list_lock);
+		uwb_rsv_destroy(rsv);
+	}
+}
+
+static int cmd_rsv_establish(struct uwb_rc *rc,
+			     struct uwb_dbg_cmd_rsv_establish *cmd)
+{
+	struct uwb_mac_addr macaddr;
+	struct uwb_rsv *rsv;
+	struct uwb_dev *target;
+	int ret;
+
+	memcpy(&macaddr, cmd->target, sizeof(macaddr));
+	target = uwb_dev_get_by_macaddr(rc, &macaddr);
+	if (target == NULL)
+		return -ENODEV;
+
+	rsv = uwb_rsv_create(rc, uwb_dbg_rsv_cb, rc->dbg);
+	if (rsv == NULL) {
+		uwb_dev_put(target);
+		return -ENOMEM;
+	}
+
+	rsv->target.type  = UWB_RSV_TARGET_DEV;
+	rsv->target.dev   = target;
+	rsv->type         = cmd->type;
+	rsv->max_mas      = cmd->max_mas;
+	rsv->min_mas      = cmd->min_mas;
+	rsv->max_interval = cmd->max_interval;
+
+	ret = uwb_rsv_establish(rsv);
+	if (ret)
+		uwb_rsv_destroy(rsv);
+	else {
+		spin_lock(&(rc->dbg)->list_lock);
+		list_add_tail(&rsv->pal_node, &rc->dbg->rsvs);
+		spin_unlock(&(rc->dbg)->list_lock);
+	}
+	return ret;
+}
+
+static int cmd_rsv_terminate(struct uwb_rc *rc,
+			     struct uwb_dbg_cmd_rsv_terminate *cmd)
+{
+	struct uwb_rsv *rsv, *found = NULL;
+	int i = 0;
+
+	spin_lock(&(rc->dbg)->list_lock);
+
+	list_for_each_entry(rsv, &rc->dbg->rsvs, pal_node) {
+		if (i == cmd->index) {
+			found = rsv;
+			uwb_rsv_get(found);
+			break;
+		}
+		i++;
+	}
+
+	spin_unlock(&(rc->dbg)->list_lock);
+
+	if (!found)
+		return -EINVAL;
+
+	uwb_rsv_terminate(found);
+	uwb_rsv_put(found);
+
+	return 0;
+}
+
+static int cmd_ie_add(struct uwb_rc *rc, struct uwb_dbg_cmd_ie *ie_to_add)
+{
+	return uwb_rc_ie_add(rc,
+			     (const struct uwb_ie_hdr *) ie_to_add->data,
+			     ie_to_add->len);
+}
+
+static int cmd_ie_rm(struct uwb_rc *rc, struct uwb_dbg_cmd_ie *ie_to_rm)
+{
+	return uwb_rc_ie_rm(rc, ie_to_rm->data[0]);
+}
+
+static ssize_t command_write(struct file *file, const char __user *buf,
+			 size_t len, loff_t *off)
+{
+	struct uwb_rc *rc = file->private_data;
+	struct uwb_dbg_cmd cmd;
+	int ret = 0;
+	
+	if (len != sizeof(struct uwb_dbg_cmd))
+		return -EINVAL;
+
+	if (copy_from_user(&cmd, buf, len) != 0)
+		return -EFAULT;
+
+	switch (cmd.type) {
+	case UWB_DBG_CMD_RSV_ESTABLISH:
+		ret = cmd_rsv_establish(rc, &cmd.rsv_establish);
+		break;
+	case UWB_DBG_CMD_RSV_TERMINATE:
+		ret = cmd_rsv_terminate(rc, &cmd.rsv_terminate);
+		break;
+	case UWB_DBG_CMD_IE_ADD:
+		ret = cmd_ie_add(rc, &cmd.ie_add);
+		break;
+	case UWB_DBG_CMD_IE_RM:
+		ret = cmd_ie_rm(rc, &cmd.ie_rm);
+		break;
+	case UWB_DBG_CMD_RADIO_START:
+		ret = uwb_radio_start(&rc->dbg->pal);
+		break;
+	case UWB_DBG_CMD_RADIO_STOP:
+		uwb_radio_stop(&rc->dbg->pal);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret < 0 ? ret : len;
+}
+
+static const struct file_operations command_fops = {
+	.open	= simple_open,
+	.write  = command_write,
+	.read   = NULL,
+	.llseek = no_llseek,
+	.owner  = THIS_MODULE,
+};
+
+static int reservations_show(struct seq_file *s, void *p)
+{
+	struct uwb_rc *rc = s->private;
+	struct uwb_rsv *rsv;
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		struct uwb_dev_addr devaddr;
+		char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE];
+		bool is_owner;
+
+		uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr);
+		if (rsv->target.type == UWB_RSV_TARGET_DEV) {
+			devaddr = rsv->target.dev->dev_addr;
+			is_owner = &rc->uwb_dev == rsv->owner;
+		} else {
+			devaddr = rsv->target.devaddr;
+			is_owner = true;
+		}
+		uwb_dev_addr_print(target, sizeof(target), &devaddr);
+
+		seq_printf(s, "%c %s -> %s: %s\n",
+			   is_owner ? 'O' : 'T',
+			   owner, target, uwb_rsv_state_str(rsv->state));
+		seq_printf(s, "  stream: %d  type: %s\n",
+			   rsv->stream, uwb_rsv_type_str(rsv->type));
+		seq_printf(s, "  %*pb\n", UWB_NUM_MAS, rsv->mas.bm);
+	}
+
+	mutex_unlock(&rc->rsvs_mutex);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(reservations);
+
+static int drp_avail_show(struct seq_file *s, void *p)
+{
+	struct uwb_rc *rc = s->private;
+
+	seq_printf(s, "global:  %*pb\n", UWB_NUM_MAS, rc->drp_avail.global);
+	seq_printf(s, "local:   %*pb\n", UWB_NUM_MAS, rc->drp_avail.local);
+	seq_printf(s, "pending: %*pb\n", UWB_NUM_MAS, rc->drp_avail.pending);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(drp_avail);
+
+static void uwb_dbg_channel_changed(struct uwb_pal *pal, int channel)
+{
+	struct device *dev = &pal->rc->uwb_dev.dev;
+
+	if (channel > 0)
+		dev_info(dev, "debug: channel %d started\n", channel);
+	else
+		dev_info(dev, "debug: channel stopped\n");
+}
+
+static void uwb_dbg_new_rsv(struct uwb_pal *pal, struct uwb_rsv *rsv)
+{
+	struct uwb_dbg *dbg = container_of(pal, struct uwb_dbg, pal);
+
+	if (dbg->accept) {
+		spin_lock(&dbg->list_lock);
+		list_add_tail(&rsv->pal_node, &dbg->rsvs);
+		spin_unlock(&dbg->list_lock);
+		uwb_rsv_accept(rsv, uwb_dbg_rsv_cb, dbg);
+	}
+}
+
+/**
+ * uwb_dbg_add_rc - add a debug interface for a radio controller
+ * @rc: the radio controller
+ */
+void uwb_dbg_add_rc(struct uwb_rc *rc)
+{
+	rc->dbg = kzalloc(sizeof(struct uwb_dbg), GFP_KERNEL);
+	if (rc->dbg == NULL)
+		return;
+
+	INIT_LIST_HEAD(&rc->dbg->rsvs);
+	spin_lock_init(&(rc->dbg)->list_lock);
+
+	uwb_pal_init(&rc->dbg->pal);
+	rc->dbg->pal.rc = rc;
+	rc->dbg->pal.channel_changed = uwb_dbg_channel_changed;
+	rc->dbg->pal.new_rsv = uwb_dbg_new_rsv;
+	uwb_pal_register(&rc->dbg->pal);
+
+	if (root_dir) {
+		rc->dbg->root_d = debugfs_create_dir(dev_name(&rc->uwb_dev.dev),
+						     root_dir);
+		rc->dbg->command_f = debugfs_create_file("command", 0200,
+							 rc->dbg->root_d, rc,
+							 &command_fops);
+		rc->dbg->reservations_f = debugfs_create_file("reservations", 0444,
+							      rc->dbg->root_d, rc,
+							      &reservations_fops);
+		rc->dbg->accept_f = debugfs_create_bool("accept", 0644,
+							rc->dbg->root_d,
+							&rc->dbg->accept);
+		rc->dbg->drp_avail_f = debugfs_create_file("drp_avail", 0444,
+							   rc->dbg->root_d, rc,
+							   &drp_avail_fops);
+	}
+}
+
+/**
+ * uwb_dbg_del_rc - remove a radio controller's debug interface
+ * @rc: the radio controller
+ */
+void uwb_dbg_del_rc(struct uwb_rc *rc)
+{
+	struct uwb_rsv *rsv, *t;
+
+	if (rc->dbg == NULL)
+		return;
+
+	list_for_each_entry_safe(rsv, t, &rc->dbg->rsvs, pal_node) {
+		uwb_rsv_terminate(rsv);
+	}
+
+	uwb_pal_unregister(&rc->dbg->pal);
+
+	if (root_dir) {
+		debugfs_remove(rc->dbg->drp_avail_f);
+		debugfs_remove(rc->dbg->accept_f);
+		debugfs_remove(rc->dbg->reservations_f);
+		debugfs_remove(rc->dbg->command_f);
+		debugfs_remove(rc->dbg->root_d);
+	}
+}
+
+/**
+ * uwb_dbg_exit - initialize the debug interface sub-module
+ */
+void uwb_dbg_init(void)
+{
+	root_dir = debugfs_create_dir("uwb", NULL);
+}
+
+/**
+ * uwb_dbg_exit - clean-up the debug interface sub-module
+ */
+void uwb_dbg_exit(void)
+{
+	debugfs_remove(root_dir);
+}
+
+/**
+ * uwb_dbg_create_pal_dir - create a debugfs directory for a PAL
+ * @pal: The PAL.
+ */
+struct dentry *uwb_dbg_create_pal_dir(struct uwb_pal *pal)
+{
+	struct uwb_rc *rc = pal->rc;
+
+	if (root_dir && rc->dbg && rc->dbg->root_d && pal->name)
+		return debugfs_create_dir(pal->name, rc->dbg->root_d);
+	return NULL;
+}
diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h
new file mode 100644
index 000000000..91326ce09
--- /dev/null
+++ b/drivers/uwb/uwb-internal.h
@@ -0,0 +1,379 @@
+/*
+ * Ultra Wide Band
+ * UWB internal API
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ * This contains most of the internal API for UWB. This is stuff used
+ * across the stack that of course, is of no interest to the rest.
+ *
+ * Some parts might end up going public (like uwb_rc_*())...
+ */
+
+#ifndef __UWB_INTERNAL_H__
+#define __UWB_INTERNAL_H__
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/uwb.h>
+#include <linux/mutex.h>
+
+struct uwb_beca_e;
+
+/* General device API */
+extern void uwb_dev_init(struct uwb_dev *uwb_dev);
+extern int __uwb_dev_offair(struct uwb_dev *, struct uwb_rc *);
+extern int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev,
+		       struct uwb_rc *parent_rc);
+extern void uwb_dev_rm(struct uwb_dev *uwb_dev);
+extern void uwbd_dev_onair(struct uwb_rc *, struct uwb_beca_e *);
+extern void uwbd_dev_offair(struct uwb_beca_e *);
+void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event);
+
+/* General UWB Radio Controller Internal API */
+extern struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *);
+static inline struct uwb_rc *__uwb_rc_get(struct uwb_rc *rc)
+{
+	uwb_dev_get(&rc->uwb_dev);
+	return rc;
+}
+
+static inline void __uwb_rc_put(struct uwb_rc *rc)
+{
+	if (rc)
+		uwb_dev_put(&rc->uwb_dev);
+}
+
+extern int uwb_rc_reset(struct uwb_rc *rc);
+extern int uwb_rc_beacon(struct uwb_rc *rc,
+			 int channel, unsigned bpst_offset);
+extern int uwb_rc_scan(struct uwb_rc *rc,
+		       unsigned channel, enum uwb_scan_type type,
+		       unsigned bpst_offset);
+extern int uwb_rc_send_all_drp_ie(struct uwb_rc *rc);
+
+void uwb_rc_ie_init(struct uwb_rc *);
+int uwb_rc_ie_setup(struct uwb_rc *);
+void uwb_rc_ie_release(struct uwb_rc *);
+int uwb_ie_dump_hex(const struct uwb_ie_hdr *ies, size_t len,
+		    char *buf, size_t size);
+int uwb_rc_set_ie(struct uwb_rc *, struct uwb_rc_cmd_set_ie *);
+
+
+extern const char *uwb_rc_strerror(unsigned code);
+
+/*
+ * Time to wait for a response to an RC command.
+ *
+ * Some commands can take a long time to response. e.g., START_BEACON
+ * may scan for several superframes before joining an existing beacon
+ * group and this can take around 600 ms.
+ */
+#define UWB_RC_CMD_TIMEOUT_MS 1000 /* ms */
+
+/*
+ * Notification/Event Handlers
+ */
+
+struct uwb_rc_neh;
+
+extern int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
+			    struct uwb_rccb *cmd, size_t cmd_size,
+			    u8 expected_type, u16 expected_event,
+			    uwb_rc_cmd_cb_f cb, void *arg);
+
+
+void uwb_rc_neh_create(struct uwb_rc *rc);
+void uwb_rc_neh_destroy(struct uwb_rc *rc);
+
+struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd,
+				  u8 expected_type, u16 expected_event,
+				  uwb_rc_cmd_cb_f cb, void *arg);
+void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh);
+void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh);
+void uwb_rc_neh_put(struct uwb_rc_neh *neh);
+
+/* Event size tables */
+extern int uwb_est_create(void);
+extern void uwb_est_destroy(void);
+
+/*
+ * UWB conflicting alien reservations
+ */
+struct uwb_cnflt_alien {
+	struct uwb_rc *rc;
+	struct list_head rc_node;
+	struct uwb_mas_bm mas;
+	struct timer_list timer;
+	struct work_struct cnflt_update_work;
+};
+
+enum uwb_uwb_rsv_alloc_result {
+	UWB_RSV_ALLOC_FOUND = 0,
+	UWB_RSV_ALLOC_NOT_FOUND,
+};
+
+enum uwb_rsv_mas_status {
+	UWB_RSV_MAS_NOT_AVAIL = 1,
+	UWB_RSV_MAS_SAFE,
+	UWB_RSV_MAS_UNSAFE,
+};
+
+struct uwb_rsv_col_set_info {
+	unsigned char start_col;
+	unsigned char interval;
+	unsigned char safe_mas_per_col;
+	unsigned char unsafe_mas_per_col;
+};
+
+struct uwb_rsv_col_info {
+	unsigned char max_avail_safe;
+	unsigned char max_avail_unsafe;
+	unsigned char highest_mas[UWB_MAS_PER_ZONE];
+	struct uwb_rsv_col_set_info csi;
+};
+
+struct uwb_rsv_row_info {
+	unsigned char avail[UWB_MAS_PER_ZONE];
+	unsigned char free_rows;
+	unsigned char used_rows;
+};
+
+/*
+ * UWB find allocation
+ */
+struct uwb_rsv_alloc_info {
+	unsigned char bm[UWB_MAS_PER_ZONE * UWB_NUM_ZONES];
+	struct uwb_rsv_col_info ci[UWB_NUM_ZONES];
+	struct uwb_rsv_row_info ri;
+	struct uwb_mas_bm *not_available;
+	struct uwb_mas_bm *result;
+	int min_mas;
+	int max_mas;
+	int max_interval;
+	int total_allocated_mases;
+	int safe_allocated_mases;
+	int unsafe_allocated_mases;
+	int interval;
+};
+
+int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv,
+				 struct uwb_mas_bm *available,
+				 struct uwb_mas_bm *result);
+void uwb_rsv_handle_drp_avail_change(struct uwb_rc *rc);
+/*
+ * UWB Events & management daemon
+ */
+
+/**
+ * enum uwb_event_type - types of UWB management daemon events
+ *
+ * The UWB management daemon (uwbd) can receive two types of events:
+ *   UWB_EVT_TYPE_NOTIF - notification from the radio controller.
+ *   UWB_EVT_TYPE_MSG   - a simple message.
+ */
+enum uwb_event_type {
+	UWB_EVT_TYPE_NOTIF,
+	UWB_EVT_TYPE_MSG,
+};
+
+/**
+ * struct uwb_event_notif - an event for a radio controller notification
+ * @size: Size of the buffer (ie: Guaranteed to contain at least
+ *        a full 'struct uwb_rceb')
+ * @rceb: Pointer to a kmalloced() event payload
+ */
+struct uwb_event_notif {
+	size_t size;
+	struct uwb_rceb *rceb;
+};
+
+/**
+ * enum uwb_event_message - an event for a message for asynchronous processing
+ *
+ * UWB_EVT_MSG_RESET - reset the radio controller and all PAL hardware.
+ */
+enum uwb_event_message {
+	UWB_EVT_MSG_RESET,
+};
+
+/**
+ * UWB Event
+ * @rc:         Radio controller that emitted the event (referenced)
+ * @ts_jiffies: Timestamp, when was it received
+ * @type:       This event's type.
+ */
+struct uwb_event {
+	struct list_head list_node;
+	struct uwb_rc *rc;
+	unsigned long ts_jiffies;
+	enum uwb_event_type type;
+	union {
+		struct uwb_event_notif notif;
+		enum uwb_event_message message;
+	};
+};
+
+extern void uwbd_start(struct uwb_rc *rc);
+extern void uwbd_stop(struct uwb_rc *rc);
+extern struct uwb_event *uwb_event_alloc(size_t, gfp_t gfp_mask);
+extern void uwbd_event_queue(struct uwb_event *);
+void uwbd_flush(struct uwb_rc *rc);
+
+/* UWB event handlers */
+extern int uwbd_evt_handle_rc_ie_rcv(struct uwb_event *);
+extern int uwbd_evt_handle_rc_beacon(struct uwb_event *);
+extern int uwbd_evt_handle_rc_beacon_size(struct uwb_event *);
+extern int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *);
+extern int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *);
+extern int uwbd_evt_handle_rc_drp(struct uwb_event *);
+extern int uwbd_evt_handle_rc_drp_avail(struct uwb_event *);
+
+int uwbd_msg_handle_reset(struct uwb_event *evt);
+
+
+/*
+ * Address management
+ */
+int uwb_rc_dev_addr_assign(struct uwb_rc *rc);
+int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt);
+
+/*
+ * UWB Beacon Cache
+ *
+ * Each beacon we received is kept in a cache--when we receive that
+ * beacon consistently, that means there is a new device that we have
+ * to add to the system.
+ */
+
+extern unsigned long beacon_timeout_ms;
+
+/**
+ * Beacon cache entry
+ *
+ * @jiffies_refresh: last time a beacon was  received that refreshed
+ *                   this cache entry.
+ * @uwb_dev: device connected to this beacon. This pointer is not
+ *           safe, you need to get it with uwb_dev_try_get()
+ *
+ * @hits: how many time we have seen this beacon since last time we
+ *        cleared it
+ */
+struct uwb_beca_e {
+	struct mutex mutex;
+	struct kref refcnt;
+	struct list_head node;
+	struct uwb_mac_addr *mac_addr;
+	struct uwb_dev_addr dev_addr;
+	u8 hits;
+	unsigned long ts_jiffies;
+	struct uwb_dev *uwb_dev;
+	struct uwb_rc_evt_beacon *be;
+	struct stats lqe_stats, rssi_stats;	/* radio statistics */
+};
+struct uwb_beacon_frame;
+extern ssize_t uwb_bce_print_IEs(struct uwb_dev *, struct uwb_beca_e *,
+				 char *, size_t);
+
+extern void uwb_bce_kfree(struct kref *_bce);
+static inline void uwb_bce_get(struct uwb_beca_e *bce)
+{
+	kref_get(&bce->refcnt);
+}
+static inline void uwb_bce_put(struct uwb_beca_e *bce)
+{
+	kref_put(&bce->refcnt, uwb_bce_kfree);
+}
+extern void uwb_beca_purge(struct uwb_rc *rc);
+extern void uwb_beca_release(struct uwb_rc *rc);
+
+struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
+				       const struct uwb_dev_addr *devaddr);
+struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc,
+				       const struct uwb_mac_addr *macaddr);
+
+int uwb_radio_setup(struct uwb_rc *rc);
+void uwb_radio_reset_state(struct uwb_rc *rc);
+void uwb_radio_shutdown(struct uwb_rc *rc);
+int uwb_radio_force_channel(struct uwb_rc *rc, int channel);
+
+/* -- UWB Sysfs representation */
+extern struct class uwb_rc_class;
+extern struct bus_type uwb_bus_type;
+extern struct device_attribute dev_attr_mac_address;
+extern struct device_attribute dev_attr_beacon;
+extern struct device_attribute dev_attr_scan;
+
+/* -- DRP Bandwidth allocator: bandwidth allocations, reservations, DRP */
+void uwb_rsv_init(struct uwb_rc *rc);
+int uwb_rsv_setup(struct uwb_rc *rc);
+void uwb_rsv_cleanup(struct uwb_rc *rc);
+void uwb_rsv_remove_all(struct uwb_rc *rc);
+void uwb_rsv_get(struct uwb_rsv *rsv);
+void uwb_rsv_put(struct uwb_rsv *rsv);
+bool uwb_rsv_has_two_drp_ies(struct uwb_rsv *rsv);
+void uwb_rsv_dump(char *text, struct uwb_rsv *rsv);
+int uwb_rsv_try_move(struct uwb_rsv *rsv, struct uwb_mas_bm *available);
+void uwb_rsv_backoff_win_timer(struct timer_list *t);
+void uwb_rsv_backoff_win_increment(struct uwb_rc *rc);
+int uwb_rsv_status(struct uwb_rsv *rsv);
+int uwb_rsv_companion_status(struct uwb_rsv *rsv);
+
+void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state);
+void uwb_rsv_remove(struct uwb_rsv *rsv);
+struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src,
+			     struct uwb_ie_drp *drp_ie);
+void uwb_rsv_sched_update(struct uwb_rc *rc);
+void uwb_rsv_queue_update(struct uwb_rc *rc);
+
+int uwb_drp_ie_update(struct uwb_rsv *rsv);
+void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie);
+
+void uwb_drp_avail_init(struct uwb_rc *rc);
+void uwb_drp_available(struct uwb_rc *rc, struct uwb_mas_bm *avail);
+int  uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas);
+void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas);
+void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas);
+void uwb_drp_avail_ie_update(struct uwb_rc *rc);
+
+/* -- PAL support */
+void uwb_rc_pal_init(struct uwb_rc *rc);
+
+/* -- Misc */
+
+extern ssize_t uwb_mac_frame_hdr_print(char *, size_t,
+				       const struct uwb_mac_frame_hdr *);
+
+/* -- Debug interface */
+void uwb_dbg_init(void);
+void uwb_dbg_exit(void);
+void uwb_dbg_add_rc(struct uwb_rc *rc);
+void uwb_dbg_del_rc(struct uwb_rc *rc);
+struct dentry *uwb_dbg_create_pal_dir(struct uwb_pal *pal);
+
+static inline void uwb_dev_lock(struct uwb_dev *uwb_dev)
+{
+	device_lock(&uwb_dev->dev);
+}
+
+static inline void uwb_dev_unlock(struct uwb_dev *uwb_dev)
+{
+	device_unlock(&uwb_dev->dev);
+}
+
+#endif /* #ifndef __UWB_INTERNAL_H__ */
diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c
new file mode 100644
index 000000000..39dd4ef53
--- /dev/null
+++ b/drivers/uwb/uwbd.c
@@ -0,0 +1,370 @@
+/*
+ * Ultra Wide Band
+ * Neighborhood Management Daemon
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This daemon takes care of maintaing information that describes the
+ * UWB neighborhood that the radios in this machine can see. It also
+ * keeps a tab of which devices are visible, makes sure each HC sits
+ * on a different channel to avoid interfering, etc.
+ *
+ * Different drivers (radio controller, device, any API in general)
+ * communicate with this daemon through an event queue. Daemon wakes
+ * up, takes a list of events and handles them one by one; handling
+ * function is extracted from a table based on the event's type and
+ * subtype. Events are freed only if the handling function says so.
+ *
+ *   . Lock protecting the event list has to be an spinlock and locked
+ *     with IRQSAVE because it might be called from an interrupt
+ *     context (ie: when events arrive and the notification drops
+ *     down from the ISR).
+ *
+ *   . UWB radio controller drivers queue events to the daemon using
+ *     uwbd_event_queue(). They just get the event, chew it to make it
+ *     look like UWBD likes it and pass it in a buffer allocated with
+ *     uwb_event_alloc().
+ *
+ * EVENTS
+ *
+ * Events have a type, a subtype, a length, some other stuff and the
+ * data blob, which depends on the event. The header is 'struct
+ * uwb_event'; for payloads, see 'struct uwbd_evt_*'.
+ *
+ * EVENT HANDLER TABLES
+ *
+ * To find a handling function for an event, the type is used to index
+ * a subtype-table in the type-table. The subtype-table is indexed
+ * with the subtype to get the function that handles the event. Start
+ * with the main type-table 'uwbd_evt_type_handler'.
+ *
+ * DEVICES
+ *
+ * Devices are created when a bunch of beacons have been received and
+ * it is stablished that the device has stable radio presence. CREATED
+ * only, not configured. Devices are ONLY configured when an
+ * Application-Specific IE Probe is receieved, in which the device
+ * declares which Protocol ID it groks. Then the device is CONFIGURED
+ * (and the driver->probe() stuff of the device model is invoked).
+ *
+ * Devices are considered disconnected when a certain number of
+ * beacons are not received in an amount of time.
+ *
+ * Handler functions are called normally uwbd_evt_handle_*().
+ */
+#include <linux/kthread.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/freezer.h>
+
+#include "uwb-internal.h"
+
+/*
+ * UWBD Event handler function signature
+ *
+ * Return !0 if the event needs not to be freed (ie the handler
+ * takes/took care of it). 0 means the daemon code will free the
+ * event.
+ *
+ * @evt->rc is already referenced and guaranteed to exist. See
+ * uwb_evt_handle().
+ */
+typedef int (*uwbd_evt_handler_f)(struct uwb_event *);
+
+/**
+ * Properties of a UWBD event
+ *
+ * @handler:    the function that will handle this event
+ * @name:       text name of event
+ */
+struct uwbd_event {
+	uwbd_evt_handler_f handler;
+	const char *name;
+};
+
+/* Table of handlers for and properties of the UWBD Radio Control Events */
+static struct uwbd_event uwbd_urc_events[] = {
+	[UWB_RC_EVT_IE_RCV] = {
+		.handler = uwbd_evt_handle_rc_ie_rcv,
+		.name = "IE_RECEIVED"
+	},
+	[UWB_RC_EVT_BEACON] = {
+		.handler = uwbd_evt_handle_rc_beacon,
+		.name = "BEACON_RECEIVED"
+	},
+	[UWB_RC_EVT_BEACON_SIZE] = {
+		.handler = uwbd_evt_handle_rc_beacon_size,
+		.name = "BEACON_SIZE_CHANGE"
+	},
+	[UWB_RC_EVT_BPOIE_CHANGE] = {
+		.handler = uwbd_evt_handle_rc_bpoie_change,
+		.name = "BPOIE_CHANGE"
+	},
+	[UWB_RC_EVT_BP_SLOT_CHANGE] = {
+		.handler = uwbd_evt_handle_rc_bp_slot_change,
+		.name = "BP_SLOT_CHANGE"
+	},
+	[UWB_RC_EVT_DRP_AVAIL] = {
+		.handler = uwbd_evt_handle_rc_drp_avail,
+		.name = "DRP_AVAILABILITY_CHANGE"
+	},
+	[UWB_RC_EVT_DRP] = {
+		.handler = uwbd_evt_handle_rc_drp,
+		.name = "DRP"
+	},
+	[UWB_RC_EVT_DEV_ADDR_CONFLICT] = {
+		.handler = uwbd_evt_handle_rc_dev_addr_conflict,
+		.name = "DEV_ADDR_CONFLICT",
+	},
+};
+
+
+
+struct uwbd_evt_type_handler {
+	const char *name;
+	struct uwbd_event *uwbd_events;
+	size_t size;
+};
+
+/* Table of handlers for each UWBD Event type. */
+static struct uwbd_evt_type_handler uwbd_urc_evt_type_handlers[] = {
+	[UWB_RC_CET_GENERAL] = {
+		.name        = "URC",
+		.uwbd_events = uwbd_urc_events,
+		.size        = ARRAY_SIZE(uwbd_urc_events),
+	},
+};
+
+static const struct uwbd_event uwbd_message_handlers[] = {
+	[UWB_EVT_MSG_RESET] = {
+		.handler = uwbd_msg_handle_reset,
+		.name = "reset",
+	},
+};
+
+/*
+ * Handle an URC event passed to the UWB Daemon
+ *
+ * @evt: the event to handle
+ * @returns: 0 if the event can be kfreed, !0 on the contrary
+ *           (somebody else took ownership) [coincidentally, returning
+ *           a <0 errno code will free it :)].
+ *
+ * Looks up the two indirection tables (one for the type, one for the
+ * subtype) to decide which function handles it and then calls the
+ * handler.
+ *
+ * The event structure passed to the event handler has the radio
+ * controller in @evt->rc referenced. The reference will be dropped
+ * once the handler returns, so if it needs it for longer (async),
+ * it'll need to take another one.
+ */
+static
+int uwbd_event_handle_urc(struct uwb_event *evt)
+{
+	int result = -EINVAL;
+	struct uwbd_evt_type_handler *type_table;
+	uwbd_evt_handler_f handler;
+	u8 type, context;
+	u16 event;
+
+	type = evt->notif.rceb->bEventType;
+	event = le16_to_cpu(evt->notif.rceb->wEvent);
+	context = evt->notif.rceb->bEventContext;
+
+	if (type >= ARRAY_SIZE(uwbd_urc_evt_type_handlers))
+		goto out;
+	type_table = &uwbd_urc_evt_type_handlers[type];
+	if (type_table->uwbd_events == NULL)
+		goto out;
+	if (event >= type_table->size)
+		goto out;
+	handler = type_table->uwbd_events[event].handler;
+	if (handler == NULL)
+		goto out;
+
+	result = (*handler)(evt);
+out:
+	if (result < 0)
+		dev_err(&evt->rc->uwb_dev.dev,
+			"UWBD: event 0x%02x/%04x/%02x, handling failed: %d\n",
+			type, event, context, result);
+	return result;
+}
+
+static void uwbd_event_handle_message(struct uwb_event *evt)
+{
+	struct uwb_rc *rc;
+	int result;
+
+	rc = evt->rc;
+
+	if (evt->message < 0 || evt->message >= ARRAY_SIZE(uwbd_message_handlers)) {
+		dev_err(&rc->uwb_dev.dev, "UWBD: invalid message type %d\n", evt->message);
+		return;
+	}
+
+	result = uwbd_message_handlers[evt->message].handler(evt);
+	if (result < 0)
+		dev_err(&rc->uwb_dev.dev, "UWBD: '%s' message failed: %d\n",
+			uwbd_message_handlers[evt->message].name, result);
+}
+
+static void uwbd_event_handle(struct uwb_event *evt)
+{
+	struct uwb_rc *rc;
+	int should_keep;
+
+	rc = evt->rc;
+
+	if (rc->ready) {
+		switch (evt->type) {
+		case UWB_EVT_TYPE_NOTIF:
+			should_keep = uwbd_event_handle_urc(evt);
+			if (should_keep <= 0)
+				kfree(evt->notif.rceb);
+			break;
+		case UWB_EVT_TYPE_MSG:
+			uwbd_event_handle_message(evt);
+			break;
+		default:
+			dev_err(&rc->uwb_dev.dev, "UWBD: invalid event type %d\n", evt->type);
+			break;
+		}
+	}
+
+	__uwb_rc_put(rc);	/* for the __uwb_rc_get() in uwb_rc_notif_cb() */
+}
+
+/**
+ * UWB Daemon
+ *
+ * Listens to all UWB notifications and takes care to track the state
+ * of the UWB neighbourhood for the kernel. When we do a run, we
+ * spinlock, move the list to a private copy and release the
+ * lock. Hold it as little as possible. Not a conflict: it is
+ * guaranteed we own the events in the private list.
+ *
+ * FIXME: should change so we don't have a 1HZ timer all the time, but
+ *        only if there are devices.
+ */
+static int uwbd(void *param)
+{
+	struct uwb_rc *rc = param;
+	unsigned long flags;
+	struct uwb_event *evt;
+	int should_stop = 0;
+
+	while (1) {
+		wait_event_interruptible_timeout(
+			rc->uwbd.wq,
+			!list_empty(&rc->uwbd.event_list)
+			  || (should_stop = kthread_should_stop()),
+			HZ);
+		if (should_stop)
+			break;
+
+		spin_lock_irqsave(&rc->uwbd.event_list_lock, flags);
+		if (!list_empty(&rc->uwbd.event_list)) {
+			evt = list_first_entry(&rc->uwbd.event_list, struct uwb_event, list_node);
+			list_del(&evt->list_node);
+		} else
+			evt = NULL;
+		spin_unlock_irqrestore(&rc->uwbd.event_list_lock, flags);
+
+		if (evt) {
+			uwbd_event_handle(evt);
+			kfree(evt);
+		}
+
+		uwb_beca_purge(rc);	/* Purge devices that left */
+	}
+	return 0;
+}
+
+
+/** Start the UWB daemon */
+void uwbd_start(struct uwb_rc *rc)
+{
+	struct task_struct *task = kthread_run(uwbd, rc, "uwbd");
+	if (IS_ERR(task)) {
+		rc->uwbd.task = NULL;
+		printk(KERN_ERR "UWB: Cannot start management daemon; "
+		       "UWB won't work\n");
+	} else {
+		rc->uwbd.task = task;
+		rc->uwbd.pid = rc->uwbd.task->pid;
+	}
+}
+
+/* Stop the UWB daemon and free any unprocessed events */
+void uwbd_stop(struct uwb_rc *rc)
+{
+	if (rc->uwbd.task)
+		kthread_stop(rc->uwbd.task);
+	uwbd_flush(rc);
+}
+
+/*
+ * Queue an event for the management daemon
+ *
+ * When some lower layer receives an event, it uses this function to
+ * push it forward to the UWB daemon.
+ *
+ * Once you pass the event, you don't own it any more, but the daemon
+ * does. It will uwb_event_free() it when done, so make sure you
+ * uwb_event_alloc()ed it or bad things will happen.
+ *
+ * If the daemon is not running, we just free the event.
+ */
+void uwbd_event_queue(struct uwb_event *evt)
+{
+	struct uwb_rc *rc = evt->rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc->uwbd.event_list_lock, flags);
+	if (rc->uwbd.pid != 0) {
+		list_add(&evt->list_node, &rc->uwbd.event_list);
+		wake_up_all(&rc->uwbd.wq);
+	} else {
+		__uwb_rc_put(evt->rc);
+		if (evt->type == UWB_EVT_TYPE_NOTIF)
+			kfree(evt->notif.rceb);
+		kfree(evt);
+	}
+	spin_unlock_irqrestore(&rc->uwbd.event_list_lock, flags);
+	return;
+}
+
+void uwbd_flush(struct uwb_rc *rc)
+{
+	struct uwb_event *evt, *nxt;
+
+	spin_lock_irq(&rc->uwbd.event_list_lock);
+	list_for_each_entry_safe(evt, nxt, &rc->uwbd.event_list, list_node) {
+		if (evt->rc == rc) {
+			__uwb_rc_put(rc);
+			list_del(&evt->list_node);
+			if (evt->type == UWB_EVT_TYPE_NOTIF)
+				kfree(evt->notif.rceb);
+			kfree(evt);
+		}
+	}
+	spin_unlock_irq(&rc->uwbd.event_list_lock);
+}
diff --git a/drivers/uwb/whc-rc.c b/drivers/uwb/whc-rc.c
new file mode 100644
index 000000000..3ae3c7025
--- /dev/null
+++ b/drivers/uwb/whc-rc.c
@@ -0,0 +1,481 @@
+/*
+ * Wireless Host Controller: Radio Control Interface (WHCI v0.95[2.3])
+ * Radio Control command/event transport to the UWB stack
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Initialize and hook up the Radio Control interface.
+ *
+ * For each device probed, creates an 'struct whcrc' which contains
+ * just the representation of the UWB Radio Controller, and the logic
+ * for reading notifications and passing them to the UWB Core.
+ *
+ * So we initialize all of those, register the UWB Radio Controller
+ * and setup the notification/event handle to pipe the notifications
+ * to the UWB management Daemon.
+ *
+ * Once uwb_rc_add() is called, the UWB stack takes control, resets
+ * the radio and readies the device to take commands the UWB
+ * API/user-space.
+ *
+ * Note this driver is just a transport driver; the commands are
+ * formed at the UWB stack and given to this driver who will deliver
+ * them to the hw and transfer the replies/notifications back to the
+ * UWB stack through the UWB daemon (UWBD).
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/uwb.h>
+#include <linux/uwb/whci.h>
+#include <linux/uwb/umc.h>
+
+#include "uwb-internal.h"
+
+/**
+ * Descriptor for an instance of the UWB Radio Control Driver that
+ * attaches to the URC interface of the WHCI PCI card.
+ *
+ * Unless there is a lock specific to the 'data members', all access
+ * is protected by uwb_rc->mutex.
+ */
+struct whcrc {
+	struct umc_dev *umc_dev;
+	struct uwb_rc *uwb_rc;		/* UWB host controller */
+
+	unsigned long area;
+	void __iomem *rc_base;
+	size_t rc_len;
+	spinlock_t irq_lock;
+
+	void *evt_buf, *cmd_buf;
+	dma_addr_t evt_dma_buf, cmd_dma_buf;
+	wait_queue_head_t cmd_wq;
+	struct work_struct event_work;
+};
+
+/**
+ * Execute an UWB RC command on WHCI/RC
+ *
+ * @rc:       Instance of a Radio Controller that is a whcrc
+ * @cmd:      Buffer containing the RCCB and payload to execute
+ * @cmd_size: Size of the command buffer.
+ *
+ * We copy the command into whcrc->cmd_buf (as it is pretty and
+ * aligned`and physically contiguous) and then press the right keys in
+ * the controller's URCCMD register to get it to read it. We might
+ * have to wait for the cmd_sem to be open to us.
+ *
+ * NOTE: rc's mutex has to be locked
+ */
+static int whcrc_cmd(struct uwb_rc *uwb_rc,
+	      const struct uwb_rccb *cmd, size_t cmd_size)
+{
+	int result = 0;
+	struct whcrc *whcrc = uwb_rc->priv;
+	struct device *dev = &whcrc->umc_dev->dev;
+	u32 urccmd;
+
+	if (cmd_size >= 4096)
+		return -EINVAL;
+
+	/*
+	 * If the URC is halted, then the hardware has reset itself.
+	 * Attempt to recover by restarting the device and then return
+	 * an error as it's likely that the current command isn't
+	 * valid for a newly started RC.
+	 */
+	if (le_readl(whcrc->rc_base + URCSTS) & URCSTS_HALTED) {
+		dev_err(dev, "requesting reset of halted radio controller\n");
+		uwb_rc_reset_all(uwb_rc);
+		return -EIO;
+	}
+
+	result = wait_event_timeout(whcrc->cmd_wq,
+		!(le_readl(whcrc->rc_base + URCCMD) & URCCMD_ACTIVE), HZ/2);
+	if (result == 0) {
+		dev_err(dev, "device is not ready to execute commands\n");
+		return -ETIMEDOUT;
+	}
+
+	memmove(whcrc->cmd_buf, cmd, cmd_size);
+	le_writeq(whcrc->cmd_dma_buf, whcrc->rc_base + URCCMDADDR);
+
+	spin_lock(&whcrc->irq_lock);
+	urccmd = le_readl(whcrc->rc_base + URCCMD);
+	urccmd &= ~(URCCMD_EARV | URCCMD_SIZE_MASK);
+	le_writel(urccmd | URCCMD_ACTIVE | URCCMD_IWR | cmd_size,
+		  whcrc->rc_base + URCCMD);
+	spin_unlock(&whcrc->irq_lock);
+
+	return 0;
+}
+
+static int whcrc_reset(struct uwb_rc *rc)
+{
+	struct whcrc *whcrc = rc->priv;
+
+	return umc_controller_reset(whcrc->umc_dev);
+}
+
+/**
+ * Reset event reception mechanism and tell hw we are ready to get more
+ *
+ * We have read all the events in the event buffer, so we are ready to
+ * reset it to the beginning.
+ *
+ * This is only called during initialization or after an event buffer
+ * has been retired.  This means we can be sure that event processing
+ * is disabled and it's safe to update the URCEVTADDR register.
+ *
+ * There's no need to wait for the event processing to start as the
+ * URC will not clear URCCMD_ACTIVE until (internal) event buffer
+ * space is available.
+ */
+static
+void whcrc_enable_events(struct whcrc *whcrc)
+{
+	u32 urccmd;
+
+	le_writeq(whcrc->evt_dma_buf, whcrc->rc_base + URCEVTADDR);
+
+	spin_lock(&whcrc->irq_lock);
+	urccmd = le_readl(whcrc->rc_base + URCCMD) & ~URCCMD_ACTIVE;
+	le_writel(urccmd | URCCMD_EARV, whcrc->rc_base + URCCMD);
+	spin_unlock(&whcrc->irq_lock);
+}
+
+static void whcrc_event_work(struct work_struct *work)
+{
+	struct whcrc *whcrc = container_of(work, struct whcrc, event_work);
+	size_t size;
+	u64 urcevtaddr;
+
+	urcevtaddr = le_readq(whcrc->rc_base + URCEVTADDR);
+	size = urcevtaddr & URCEVTADDR_OFFSET_MASK;
+
+	uwb_rc_neh_grok(whcrc->uwb_rc, whcrc->evt_buf, size);
+	whcrc_enable_events(whcrc);
+}
+
+/**
+ * Catch interrupts?
+ *
+ * We ack inmediately (and expect the hw to do the right thing and
+ * raise another IRQ if things have changed :)
+ */
+static
+irqreturn_t whcrc_irq_cb(int irq, void *_whcrc)
+{
+	struct whcrc *whcrc = _whcrc;
+	struct device *dev = &whcrc->umc_dev->dev;
+	u32 urcsts;
+
+	urcsts = le_readl(whcrc->rc_base + URCSTS);
+	if (!(urcsts & URCSTS_INT_MASK))
+		return IRQ_NONE;
+	le_writel(urcsts & URCSTS_INT_MASK, whcrc->rc_base + URCSTS);
+
+	if (urcsts & URCSTS_HSE) {
+		dev_err(dev, "host system error -- hardware halted\n");
+		/* FIXME: do something sensible here */
+		goto out;
+	}
+	if (urcsts & URCSTS_ER)
+		schedule_work(&whcrc->event_work);
+	if (urcsts & URCSTS_RCI)
+		wake_up_all(&whcrc->cmd_wq);
+out:
+	return IRQ_HANDLED;
+}
+
+
+/**
+ * Initialize a UMC RC interface: map regions, get (shared) IRQ
+ */
+static
+int whcrc_setup_rc_umc(struct whcrc *whcrc)
+{
+	int result = 0;
+	struct device *dev = &whcrc->umc_dev->dev;
+	struct umc_dev *umc_dev = whcrc->umc_dev;
+
+	whcrc->area = umc_dev->resource.start;
+	whcrc->rc_len = resource_size(&umc_dev->resource);
+	result = -EBUSY;
+	if (request_mem_region(whcrc->area, whcrc->rc_len, KBUILD_MODNAME) == NULL) {
+		dev_err(dev, "can't request URC region (%zu bytes @ 0x%lx): %d\n",
+			whcrc->rc_len, whcrc->area, result);
+		goto error_request_region;
+	}
+
+	whcrc->rc_base = ioremap_nocache(whcrc->area, whcrc->rc_len);
+	if (whcrc->rc_base == NULL) {
+		dev_err(dev, "can't ioremap registers (%zu bytes @ 0x%lx): %d\n",
+			whcrc->rc_len, whcrc->area, result);
+		goto error_ioremap_nocache;
+	}
+
+	result = request_irq(umc_dev->irq, whcrc_irq_cb, IRQF_SHARED,
+			     KBUILD_MODNAME, whcrc);
+	if (result < 0) {
+		dev_err(dev, "can't allocate IRQ %d: %d\n",
+			umc_dev->irq, result);
+		goto error_request_irq;
+	}
+
+	result = -ENOMEM;
+	whcrc->cmd_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE,
+					    &whcrc->cmd_dma_buf, GFP_KERNEL);
+	if (whcrc->cmd_buf == NULL) {
+		dev_err(dev, "Can't allocate cmd transfer buffer\n");
+		goto error_cmd_buffer;
+	}
+
+	whcrc->evt_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE,
+					    &whcrc->evt_dma_buf, GFP_KERNEL);
+	if (whcrc->evt_buf == NULL) {
+		dev_err(dev, "Can't allocate evt transfer buffer\n");
+		goto error_evt_buffer;
+	}
+	return 0;
+
+error_evt_buffer:
+	dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf,
+			  whcrc->cmd_dma_buf);
+error_cmd_buffer:
+	free_irq(umc_dev->irq, whcrc);
+error_request_irq:
+	iounmap(whcrc->rc_base);
+error_ioremap_nocache:
+	release_mem_region(whcrc->area, whcrc->rc_len);
+error_request_region:
+	return result;
+}
+
+
+/**
+ * Release RC's UMC resources
+ */
+static
+void whcrc_release_rc_umc(struct whcrc *whcrc)
+{
+	struct umc_dev *umc_dev = whcrc->umc_dev;
+
+	dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->evt_buf,
+			  whcrc->evt_dma_buf);
+	dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf,
+			  whcrc->cmd_dma_buf);
+	free_irq(umc_dev->irq, whcrc);
+	iounmap(whcrc->rc_base);
+	release_mem_region(whcrc->area, whcrc->rc_len);
+}
+
+
+/**
+ * whcrc_start_rc - start a WHCI radio controller
+ * @whcrc: the radio controller to start
+ *
+ * Reset the UMC device, start the radio controller, enable events and
+ * finally enable interrupts.
+ */
+static int whcrc_start_rc(struct uwb_rc *rc)
+{
+	struct whcrc *whcrc = rc->priv;
+	struct device *dev = &whcrc->umc_dev->dev;
+
+	/* Reset the thing */
+	le_writel(URCCMD_RESET, whcrc->rc_base + URCCMD);
+	if (whci_wait_for(dev, whcrc->rc_base + URCCMD, URCCMD_RESET, 0,
+			  5000, "hardware reset") < 0)
+		return -EBUSY;
+
+	/* Set the event buffer, start the controller (enable IRQs later) */
+	le_writel(0, whcrc->rc_base + URCINTR);
+	le_writel(URCCMD_RS, whcrc->rc_base + URCCMD);
+	if (whci_wait_for(dev, whcrc->rc_base + URCSTS, URCSTS_HALTED, 0,
+			  5000, "radio controller start") < 0)
+		return -ETIMEDOUT;
+	whcrc_enable_events(whcrc);
+	le_writel(URCINTR_EN_ALL, whcrc->rc_base + URCINTR);
+	return 0;
+}
+
+
+/**
+ * whcrc_stop_rc - stop a WHCI radio controller
+ * @whcrc: the radio controller to stop
+ *
+ * Disable interrupts and cancel any pending event processing work
+ * before clearing the Run/Stop bit.
+ */
+static
+void whcrc_stop_rc(struct uwb_rc *rc)
+{
+	struct whcrc *whcrc = rc->priv;
+	struct umc_dev *umc_dev = whcrc->umc_dev;
+
+	le_writel(0, whcrc->rc_base + URCINTR);
+	cancel_work_sync(&whcrc->event_work);
+
+	le_writel(0, whcrc->rc_base + URCCMD);
+	whci_wait_for(&umc_dev->dev, whcrc->rc_base + URCSTS,
+		      URCSTS_HALTED, URCSTS_HALTED, 100, "radio controller stop");
+}
+
+static void whcrc_init(struct whcrc *whcrc)
+{
+	spin_lock_init(&whcrc->irq_lock);
+	init_waitqueue_head(&whcrc->cmd_wq);
+	INIT_WORK(&whcrc->event_work, whcrc_event_work);
+}
+
+/**
+ * Initialize the radio controller.
+ *
+ * NOTE: we setup whcrc->uwb_rc before calling uwb_rc_add(); in the
+ *       IRQ handler we use that to determine if the hw is ready to
+ *       handle events. Looks like a race condition, but it really is
+ *       not.
+ */
+static
+int whcrc_probe(struct umc_dev *umc_dev)
+{
+	int result;
+	struct uwb_rc *uwb_rc;
+	struct whcrc *whcrc;
+	struct device *dev = &umc_dev->dev;
+
+	result = -ENOMEM;
+	uwb_rc = uwb_rc_alloc();
+	if (uwb_rc == NULL) {
+		dev_err(dev, "unable to allocate RC instance\n");
+		goto error_rc_alloc;
+	}
+	whcrc = kzalloc(sizeof(*whcrc), GFP_KERNEL);
+	if (whcrc == NULL) {
+		dev_err(dev, "unable to allocate WHC-RC instance\n");
+		goto error_alloc;
+	}
+	whcrc_init(whcrc);
+	whcrc->umc_dev = umc_dev;
+
+	result = whcrc_setup_rc_umc(whcrc);
+	if (result < 0) {
+		dev_err(dev, "Can't setup RC UMC interface: %d\n", result);
+		goto error_setup_rc_umc;
+	}
+	whcrc->uwb_rc = uwb_rc;
+
+	uwb_rc->owner = THIS_MODULE;
+	uwb_rc->cmd   = whcrc_cmd;
+	uwb_rc->reset = whcrc_reset;
+	uwb_rc->start = whcrc_start_rc;
+	uwb_rc->stop  = whcrc_stop_rc;
+
+	result = uwb_rc_add(uwb_rc, dev, whcrc);
+	if (result < 0)
+		goto error_rc_add;
+	umc_set_drvdata(umc_dev, whcrc);
+	return 0;
+
+error_rc_add:
+	whcrc_release_rc_umc(whcrc);
+error_setup_rc_umc:
+	kfree(whcrc);
+error_alloc:
+	uwb_rc_put(uwb_rc);
+error_rc_alloc:
+	return result;
+}
+
+/**
+ * Clean up the radio control resources
+ *
+ * When we up the command semaphore, everybody possibly held trying to
+ * execute a command should be granted entry and then they'll see the
+ * host is quiescing and up it (so it will chain to the next waiter).
+ * This should not happen (in any case), as we can only remove when
+ * there are no handles open...
+ */
+static void whcrc_remove(struct umc_dev *umc_dev)
+{
+	struct whcrc *whcrc = umc_get_drvdata(umc_dev);
+	struct uwb_rc *uwb_rc = whcrc->uwb_rc;
+
+	umc_set_drvdata(umc_dev, NULL);
+	uwb_rc_rm(uwb_rc);
+	whcrc_release_rc_umc(whcrc);
+	kfree(whcrc);
+	uwb_rc_put(uwb_rc);
+}
+
+static int whcrc_pre_reset(struct umc_dev *umc)
+{
+	struct whcrc *whcrc = umc_get_drvdata(umc);
+	struct uwb_rc *uwb_rc = whcrc->uwb_rc;
+
+	uwb_rc_pre_reset(uwb_rc);
+	return 0;
+}
+
+static int whcrc_post_reset(struct umc_dev *umc)
+{
+	struct whcrc *whcrc = umc_get_drvdata(umc);
+	struct uwb_rc *uwb_rc = whcrc->uwb_rc;
+
+	return uwb_rc_post_reset(uwb_rc);
+}
+
+/* PCI device ID's that we handle [so it gets loaded] */
+static struct pci_device_id __used whcrc_id_table[] = {
+	{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
+	{ /* empty last entry */ }
+};
+MODULE_DEVICE_TABLE(pci, whcrc_id_table);
+
+static struct umc_driver whcrc_driver = {
+	.name       = "whc-rc",
+	.cap_id     = UMC_CAP_ID_WHCI_RC,
+	.probe      = whcrc_probe,
+	.remove     = whcrc_remove,
+	.pre_reset  = whcrc_pre_reset,
+	.post_reset = whcrc_post_reset,
+};
+
+static int __init whcrc_driver_init(void)
+{
+	return umc_driver_register(&whcrc_driver);
+}
+module_init(whcrc_driver_init);
+
+static void __exit whcrc_driver_exit(void)
+{
+	umc_driver_unregister(&whcrc_driver);
+}
+module_exit(whcrc_driver_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Wireless Host Controller Radio Control Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/whci.c b/drivers/uwb/whci.c
new file mode 100644
index 000000000..c3ee39a04
--- /dev/null
+++ b/drivers/uwb/whci.c
@@ -0,0 +1,258 @@
+/*
+ * WHCI UWB Multi-interface Controller enumerator.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/uwb/whci.h>
+#include <linux/uwb/umc.h>
+
+struct whci_card {
+	struct pci_dev *pci;
+	void __iomem *uwbbase;
+	u8 n_caps;
+	struct umc_dev *devs[0];
+};
+
+
+/* Fix faulty HW :( */
+static
+u64 whci_capdata_quirks(struct whci_card *card, u64 capdata)
+{
+	u64 capdata_orig = capdata;
+	struct pci_dev *pci_dev = card->pci;
+	if (pci_dev->vendor == PCI_VENDOR_ID_INTEL
+	    && (pci_dev->device == 0x0c3b || pci_dev->device == 0004)
+	    && pci_dev->class == 0x0d1010) {
+		switch (UWBCAPDATA_TO_CAP_ID(capdata)) {
+			/* WLP capability has 0x100 bytes of aperture */
+		case 0x80:
+			capdata |= 0x40 << 8; break;
+			/* WUSB capability has 0x80 bytes of aperture
+			 * and ID is 1 */
+		case 0x02:
+			capdata &= ~0xffff;
+			capdata |= 0x2001;
+			break;
+		}
+	}
+	if (capdata_orig != capdata)
+		dev_warn(&pci_dev->dev,
+			 "PCI v%04x d%04x c%06x#%02x: "
+			 "corrected capdata from %016Lx to %016Lx\n",
+			 pci_dev->vendor, pci_dev->device, pci_dev->class,
+			 (unsigned)UWBCAPDATA_TO_CAP_ID(capdata),
+			 (unsigned long long)capdata_orig,
+			 (unsigned long long)capdata);
+	return capdata;
+}
+
+
+/**
+ * whci_wait_for - wait for a WHCI register to be set
+ *
+ * Polls (for at most @max_ms ms) until '*@reg & @mask == @result'.
+ */
+int whci_wait_for(struct device *dev, u32 __iomem *reg, u32 mask, u32 result,
+	unsigned long max_ms, const char *tag)
+{
+	unsigned t = 0;
+	u32 val;
+	for (;;) {
+		val = le_readl(reg);
+		if ((val & mask) == result)
+			break;
+		if (t >= max_ms) {
+			dev_err(dev, "%s timed out\n", tag);
+			return -ETIMEDOUT;
+		}
+		msleep(10);
+		t += 10;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(whci_wait_for);
+
+
+/*
+ * NOTE: the capinfo and capdata registers are slightly different
+ *       (size and cap-id fields). So for cap #0, we need to fill
+ *       in. Size comes from the size of the register block
+ *       (statically calculated); cap_id comes from nowhere, we use
+ *       zero, that is reserved, for the radio controller, because
+ *       none was defined at the spec level.
+ */
+static int whci_add_cap(struct whci_card *card, int n)
+{
+	struct umc_dev *umc;
+	u64 capdata;
+	int bar, err;
+
+	umc = umc_device_create(&card->pci->dev, n);
+	if (umc == NULL)
+		return -ENOMEM;
+
+	capdata = le_readq(card->uwbbase + UWBCAPDATA(n));
+
+	bar = UWBCAPDATA_TO_BAR(capdata) << 1;
+
+	capdata = whci_capdata_quirks(card, capdata);
+	/* Capability 0 is the radio controller. It's size is 32
+	 * bytes (WHCI0.95[2.3, T2-9]). */
+	umc->version         = UWBCAPDATA_TO_VERSION(capdata);
+	umc->cap_id          = n == 0 ? 0 : UWBCAPDATA_TO_CAP_ID(capdata);
+	umc->bar	     = bar;
+	umc->resource.start  = pci_resource_start(card->pci, bar)
+		+ UWBCAPDATA_TO_OFFSET(capdata);
+	umc->resource.end    = umc->resource.start
+		+ (n == 0 ? 0x20 : UWBCAPDATA_TO_SIZE(capdata)) - 1;
+	umc->resource.name   = dev_name(&umc->dev);
+	umc->resource.flags  = card->pci->resource[bar].flags;
+	umc->resource.parent = &card->pci->resource[bar];
+	umc->irq             = card->pci->irq;
+
+	err = umc_device_register(umc);
+	if (err < 0)
+		goto error;
+	card->devs[n] = umc;
+	return 0;
+
+error:
+	kfree(umc);
+	return err;
+}
+
+static void whci_del_cap(struct whci_card *card, int n)
+{
+	struct umc_dev *umc = card->devs[n];
+
+	umc_device_unregister(umc);
+}
+
+static int whci_n_caps(struct pci_dev *pci)
+{
+	void __iomem *uwbbase;
+	u64 capinfo;
+
+	uwbbase = pci_iomap(pci, 0, 8);
+	if (!uwbbase)
+		return -ENOMEM;
+	capinfo = le_readq(uwbbase + UWBCAPINFO);
+	pci_iounmap(pci, uwbbase);
+
+	return UWBCAPINFO_TO_N_CAPS(capinfo);
+}
+
+static int whci_probe(struct pci_dev *pci, const struct pci_device_id *id)
+{
+	struct whci_card *card;
+	int err, n_caps, n;
+
+	err = pci_enable_device(pci);
+	if (err < 0)
+		goto error;
+	pci_enable_msi(pci);
+	pci_set_master(pci);
+	err = -ENXIO;
+	if (!pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
+		pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
+	else if (!pci_set_dma_mask(pci, DMA_BIT_MASK(32)))
+		pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
+	else
+		goto error_dma;
+
+	err = n_caps = whci_n_caps(pci);
+	if (n_caps < 0)
+		goto error_ncaps;
+
+	err = -ENOMEM;
+	card = kzalloc(sizeof(struct whci_card)
+		       + sizeof(struct umc_dev *) * (n_caps + 1),
+		       GFP_KERNEL);
+	if (card == NULL)
+		goto error_kzalloc;
+	card->pci = pci;
+	card->n_caps = n_caps;
+
+	err = -EBUSY;
+	if (!request_mem_region(pci_resource_start(pci, 0),
+				UWBCAPDATA_SIZE(card->n_caps),
+				"whci (capability data)"))
+		goto error_request_memregion;
+	err = -ENOMEM;
+	card->uwbbase = pci_iomap(pci, 0, UWBCAPDATA_SIZE(card->n_caps));
+	if (!card->uwbbase)
+		goto error_iomap;
+
+	/* Add each capability. */
+	for (n = 0; n <= card->n_caps; n++) {
+		err = whci_add_cap(card, n);
+		if (err < 0 && n == 0) {
+			dev_err(&pci->dev, "cannot bind UWB radio controller:"
+				" %d\n", err);
+			goto error_bind;
+		}
+		if (err < 0)
+			dev_warn(&pci->dev, "warning: cannot bind capability "
+				 "#%u: %d\n", n, err);
+	}
+	pci_set_drvdata(pci, card);
+	return 0;
+
+error_bind:
+	pci_iounmap(pci, card->uwbbase);
+error_iomap:
+	release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps));
+error_request_memregion:
+	kfree(card);
+error_kzalloc:
+error_ncaps:
+error_dma:
+	pci_disable_msi(pci);
+	pci_disable_device(pci);
+error:
+	return err;
+}
+
+static void whci_remove(struct pci_dev *pci)
+{
+	struct whci_card *card = pci_get_drvdata(pci);
+	int n;
+
+	pci_set_drvdata(pci, NULL);
+	/* Unregister each capability in reverse (so the master device
+	 * is unregistered last). */
+	for (n = card->n_caps; n >= 0 ; n--)
+		whci_del_cap(card, n);
+	pci_iounmap(pci, card->uwbbase);
+	release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps));
+	kfree(card);
+	pci_disable_msi(pci);
+	pci_disable_device(pci);
+}
+
+static struct pci_device_id whci_id_table[] = {
+	{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
+	{ 0 },
+};
+MODULE_DEVICE_TABLE(pci, whci_id_table);
+
+
+static struct pci_driver whci_driver = {
+	.name     = "whci",
+	.id_table = whci_id_table,
+	.probe    = whci_probe,
+	.remove   = whci_remove,
+};
+
+module_pci_driver(whci_driver);
+MODULE_DESCRIPTION("WHCI UWB Multi-interface Controller enumerator");
+MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
+MODULE_LICENSE("GPL");