Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 485 insertions, 0 deletions

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
new file mode 100644
index 000000000..2919e2334
--- /dev/null
+++ b/drivers/video/backlight/Kconfig
@@ -0,0 +1,485 @@
+#
+# Backlight & LCD drivers configuration
+#
+
+menuconfig BACKLIGHT_LCD_SUPPORT
+	bool "Backlight & LCD device support"
+	help
+	  Enable this to be able to choose the drivers for controlling the
+	  backlight and the LCD panel on some platforms, for example on PDAs.
+
+if BACKLIGHT_LCD_SUPPORT
+
+#
+# LCD
+#
+config LCD_CLASS_DEVICE
+        tristate "Lowlevel LCD controls"
+	default m
+	help
+	  This framework adds support for low-level control of LCD.
+	  Some framebuffer devices connect to platform-specific LCD modules
+	  in order to have a platform-specific way to control the flat panel
+	  (contrast and applying power to the LCD (not to the backlight!)).
+
+	  To have support for your specific LCD panel you will have to
+	  select the proper drivers which depend on this option.
+
+if LCD_CLASS_DEVICE
+
+config LCD_CORGI
+	tristate "LCD Panel support for SHARP corgi/spitz model"
+	depends on SPI_MASTER && PXA_SHARPSL && BACKLIGHT_CLASS_DEVICE
+	help
+	  Say y here to support the LCD panels usually found on SHARP
+	  corgi (C7x0) and spitz (Cxx00) models.
+
+config LCD_L4F00242T03
+	tristate "Epson L4F00242T03 LCD"
+	depends on SPI_MASTER
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  SPI driver for Epson L4F00242T03. This provides basic support
+	  for init and powering the LCD up/down through a sysfs interface.
+
+config LCD_LMS283GF05
+	tristate "Samsung LMS283GF05 LCD"
+	depends on SPI_MASTER
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  SPI driver for Samsung LMS283GF05. This provides basic support
+	  for powering the LCD up/down through a sysfs interface.
+
+config LCD_LTV350QV
+	tristate "Samsung LTV350QV LCD Panel"
+	depends on SPI_MASTER
+	help
+	  If you have a Samsung LTV350QV LCD panel, say y to include a
+	  power control driver for it.  The panel starts up in power
+	  off state, so you need this driver in order to see any
+	  output.
+
+	  The LTV350QV panel is present on all ATSTK1000 boards.
+
+config LCD_ILI922X
+	tristate "ILI Technology ILI9221/ILI9222 support"
+	depends on SPI
+	help
+	  If you have a panel based on the ILI9221/9222 controller
+	  chip then say y to include a driver for it.
+
+config LCD_ILI9320
+	tristate "ILI Technology ILI9320 controller support"
+	depends on SPI
+	help
+	  If you have a panel based on the ILI9320 controller chip
+	  then say y to include a power driver for it.
+
+config LCD_TDO24M
+	tristate "Toppoly TDO24M  and TDO35S LCD Panels support"
+	depends on SPI_MASTER
+	help
+	  If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to
+	  include the support for it.
+
+config LCD_VGG2432A4
+	tristate "VGG2432A4 LCM device support"
+	depends on SPI_MASTER
+	select LCD_ILI9320
+	help
+	  If you have a VGG2432A4 panel based on the ILI9320 controller chip
+	  then say y to include a power driver for it.
+
+config LCD_PLATFORM
+	tristate "Platform LCD controls"
+	help
+	  This driver provides a platform-device registered LCD power
+	  control interface.
+
+config LCD_TOSA
+	tristate "Sharp SL-6000 LCD Driver"
+	depends on I2C && SPI && MACH_TOSA
+	help
+	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
+	  for its LCD.
+
+config LCD_HP700
+	tristate "HP Jornada 700 series LCD Driver"
+	depends on SA1100_JORNADA720_SSP && !PREEMPT
+	default y
+	help
+	  If you have an HP Jornada 700 series handheld (710/720/728)
+	  say Y to enable LCD control driver.
+
+config LCD_S6E63M0
+	tristate "S6E63M0 AMOLED LCD Driver"
+	depends on SPI && BACKLIGHT_CLASS_DEVICE
+	default n
+	help
+	  If you have an S6E63M0 LCD Panel, say Y to enable its
+	  LCD control driver.
+
+config LCD_LD9040
+	tristate "LD9040 AMOLED LCD Driver"
+	depends on SPI && BACKLIGHT_CLASS_DEVICE
+	default n
+	help
+	  If you have an LD9040 Panel, say Y to enable its
+	  control driver.
+
+config LCD_AMS369FG06
+	tristate "AMS369FG06 AMOLED LCD Driver"
+	depends on SPI && BACKLIGHT_CLASS_DEVICE
+	default n
+	help
+	  If you have an AMS369FG06 AMOLED Panel, say Y to enable its
+	  LCD control driver.
+
+config LCD_LMS501KF03
+	tristate "LMS501KF03 LCD Driver"
+	depends on SPI
+	default n
+	help
+	  If you have an LMS501KF03 LCD Panel, say Y to enable its
+	  LCD control driver.
+
+config LCD_HX8357
+	tristate "Himax HX-8357 LCD Driver"
+	depends on SPI
+	help
+	  If you have a HX-8357 LCD panel, say Y to enable its LCD control
+	  driver.
+
+  config LCD_OTM3225A
+  	tristate "ORISE Technology OTM3225A support"
+  	depends on SPI
+  	help
+  	  If you have a panel based on the OTM3225A controller
+  	  chip then say y to include a driver for it.
+
+endif # LCD_CLASS_DEVICE
+
+#
+# Backlight
+#
+config BACKLIGHT_CLASS_DEVICE
+        tristate "Lowlevel Backlight controls"
+	default m
+	help
+	  This framework adds support for low-level control of the LCD
+          backlight. This includes support for brightness and power.
+
+	  To have support for your specific LCD panel you will have to
+	  select the proper drivers which depend on this option.
+
+if BACKLIGHT_CLASS_DEVICE
+
+config BACKLIGHT_ATMEL_LCDC
+	bool "Atmel LCDC Contrast-as-Backlight control"
+	depends on FB_ATMEL
+	help
+	  This provides a backlight control internal to the Atmel LCDC
+	  driver.  If the LCD "contrast control" on your board is wired
+	  so it controls the backlight brightness, select this option to
+	  export this as a PWM-based backlight control.
+
+	  If in doubt, it's safe to enable this option; it doesn't kick
+	  in unless the board's description says it's wired that way.
+
+config BACKLIGHT_EP93XX
+	tristate "Cirrus EP93xx Backlight Driver"
+	depends on FB_EP93XX
+	help
+	  If you have a LCD backlight connected to the BRIGHT output of
+	  the EP93xx, say Y here to enable this driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called ep93xx_bl.
+
+config BACKLIGHT_GENERIC
+	tristate "Generic (aka Sharp Corgi) Backlight Driver"
+	default y
+	help
+	  Say y to enable the generic platform backlight driver previously
+	  known as the Corgi backlight driver. If you have a Sharp Zaurus
+	  SL-C7xx, SL-Cxx00 or SL-6000x say y.
+
+config BACKLIGHT_IPAQ_MICRO
+	tristate "iPAQ microcontroller backlight driver"
+	depends on MFD_IPAQ_MICRO
+	default y
+	help
+	  Say y to enable the backlight driver for Compaq iPAQ handheld
+	  computers. Say yes if you have one of the h3100/h3600/h3700
+	  machines.
+
+config BACKLIGHT_LM3533
+	tristate "Backlight Driver for LM3533"
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on MFD_LM3533
+	help
+	  Say Y to enable the backlight driver for National Semiconductor / TI
+	  LM3533 Lighting Power chips.
+
+	  The backlights can be controlled directly, through PWM input, or by
+	  the ambient-light-sensor interface. The chip supports 256 brightness
+	  levels.
+
+config BACKLIGHT_LOCOMO
+	tristate "Sharp LOCOMO LCD/Backlight Driver"
+	depends on SHARP_LOCOMO
+	default y
+	help
+	  If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
+	  enable the LCD/backlight driver.
+
+config BACKLIGHT_OMAP1
+	tristate "OMAP1 PWL-based LCD Backlight"
+	depends on ARCH_OMAP1
+	default y
+	help
+	  This driver controls the LCD backlight level and power for
+	  the PWL module of OMAP1 processors.  Say Y if your board
+	  uses this hardware.
+
+config BACKLIGHT_HP680
+	tristate "HP Jornada 680 Backlight Driver"
+	depends on SH_HP6XX
+	default y
+	help
+	  If you have a HP Jornada 680, say y to enable the
+	  backlight driver.
+
+config BACKLIGHT_HP700
+	tristate "HP Jornada 700 series Backlight Driver"
+	depends on SA1100_JORNADA720_SSP && !PREEMPT
+	default y
+	help
+	  If you have an HP Jornada 700 series,
+	  say Y to include backlight control driver.
+
+config BACKLIGHT_CARILLO_RANCH
+	tristate "Intel Carillo Ranch Backlight Driver"
+	depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
+	help
+	  If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
+	  backlight driver.
+
+config BACKLIGHT_PWM
+	tristate "Generic PWM based Backlight Driver"
+	depends on PWM
+	help
+	  If you have a LCD backlight adjustable by PWM, say Y to enable
+	  this driver.
+
+config BACKLIGHT_DA903X
+	tristate "Backlight Driver for DA9030/DA9034 using WLED"
+	depends on PMIC_DA903X
+	help
+	  If you have a LCD backlight connected to the WLED output of DA9030
+	  or DA9034 WLED output, say Y here to enable this driver.
+
+config BACKLIGHT_DA9052
+	tristate "Dialog DA9052/DA9053 WLED"
+	depends on PMIC_DA9052
+	help
+	  Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs.
+
+config BACKLIGHT_MAX8925
+	tristate "Backlight driver for MAX8925"
+	depends on MFD_MAX8925
+	help
+	  If you have a LCD backlight connected to the WLED output of MAX8925
+	  WLED output, say Y here to enable this driver.
+
+config BACKLIGHT_APPLE
+       tristate "Apple Backlight Driver"
+       depends on X86 && ACPI
+       help
+         If you have an Intel-based Apple say Y to enable a driver for its
+	 backlight.
+
+config BACKLIGHT_TOSA
+	tristate "Sharp SL-6000 Backlight Driver"
+	depends on I2C && MACH_TOSA && LCD_TOSA
+	help
+	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
+	  for its backlight
+
+config BACKLIGHT_PM8941_WLED
+	tristate "Qualcomm PM8941 WLED Driver"
+	select REGMAP
+	help
+	  If you have the Qualcomm PM8941, say Y to enable a driver for the
+	  WLED block.
+
+config BACKLIGHT_SAHARA
+	tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
+	depends on X86
+	help
+	  If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
+	  backlight driver.
+
+config BACKLIGHT_WM831X
+	tristate "WM831x PMIC Backlight Driver"
+	depends on MFD_WM831X
+	help
+	  If you have a backlight driven by the ISINK and DCDC of a
+	  WM831x PMIC say y to enable the backlight driver for it.
+
+config BACKLIGHT_ADP5520
+	tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
+	depends on PMIC_ADP5520
+	help
+	  If you have a LCD backlight connected to the BST/BL_SNK output of
+	  ADP5520 or ADP5501, say Y here to enable this driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called adp5520_bl.
+
+config BACKLIGHT_ADP8860
+	tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED"
+	depends on BACKLIGHT_CLASS_DEVICE && I2C
+	select NEW_LEDS
+	select LEDS_CLASS
+	help
+	  If you have a LCD backlight connected to the ADP8860, ADP8861 or
+	  ADP8863 say Y here to enable this driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called adp8860_bl.
+
+config BACKLIGHT_ADP8870
+	tristate "Backlight Driver for ADP8870 using WLED"
+	depends on BACKLIGHT_CLASS_DEVICE && I2C
+	select NEW_LEDS
+	select LEDS_CLASS
+	help
+	  If you have a LCD backlight connected to the ADP8870,
+	  say Y here to enable this driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called adp8870_bl.
+
+config BACKLIGHT_88PM860X
+	tristate "Backlight Driver for 88PM8606 using WLED"
+	depends on MFD_88PM860X
+	help
+	  Say Y to enable the backlight driver for Marvell 88PM8606.
+
+config BACKLIGHT_PCF50633
+	tristate "Backlight driver for NXP PCF50633 MFD"
+	depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633
+	help
+	  If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
+	  enable its driver.
+
+config BACKLIGHT_AAT2870
+	tristate "AnalogicTech AAT2870 Backlight"
+	depends on BACKLIGHT_CLASS_DEVICE && MFD_AAT2870_CORE
+	help
+	  If you have a AnalogicTech AAT2870 say Y to enable the
+	  backlight driver.
+
+config BACKLIGHT_LM3630A
+	tristate "Backlight Driver for LM3630A"
+	depends on BACKLIGHT_CLASS_DEVICE && I2C && PWM
+	select REGMAP_I2C
+	help
+	  This supports TI LM3630A Backlight Driver
+
+config BACKLIGHT_LM3639
+	tristate "Backlight Driver for LM3639"
+	depends on BACKLIGHT_CLASS_DEVICE && I2C
+	select REGMAP_I2C
+	select NEW_LEDS
+	select LEDS_CLASS
+	help
+	  This supports TI LM3639 Backlight + 1.5A Flash LED Driver
+
+config BACKLIGHT_LP855X
+	tristate "Backlight driver for TI LP855X"
+	depends on BACKLIGHT_CLASS_DEVICE && I2C && PWM
+	help
+	  This supports TI LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
+	  LP8557 backlight driver.
+
+config BACKLIGHT_LP8788
+	tristate "Backlight driver for TI LP8788 MFD"
+	depends on BACKLIGHT_CLASS_DEVICE && MFD_LP8788 && PWM
+	help
+	  This supports TI LP8788 backlight driver.
+
+config BACKLIGHT_OT200
+	tristate "Backlight driver for ot200 visualisation device"
+	depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT && GPIO_CS5535
+	help
+	  To compile this driver as a module, choose M here: the module will be
+	  called ot200_bl.
+
+config BACKLIGHT_PANDORA
+	tristate "Backlight driver for Pandora console"
+	depends on TWL4030_CORE
+	help
+	  If you have a Pandora console, say Y to enable the
+	  backlight driver.
+
+config BACKLIGHT_SKY81452
+	tristate "Backlight driver for SKY81452"
+	depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452
+	help
+	  If you have a Skyworks SKY81452, say Y to enable the
+	  backlight driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called sky81452-backlight
+
+config BACKLIGHT_TPS65217
+	tristate "TPS65217 Backlight"
+	depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
+	help
+	  If you have a Texas Instruments TPS65217 say Y to enable the
+	  backlight driver.
+
+config BACKLIGHT_AS3711
+	tristate "AS3711 Backlight"
+	depends on BACKLIGHT_CLASS_DEVICE && MFD_AS3711
+	help
+	  If you have an Austrian Microsystems AS3711 say Y to enable the
+	  backlight driver.
+
+config BACKLIGHT_GPIO
+	tristate "Generic GPIO based Backlight Driver"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  If you have a LCD backlight adjustable by GPIO, say Y to enable
+	  this driver.
+
+config BACKLIGHT_LV5207LP
+	tristate "Sanyo LV5207LP Backlight"
+	depends on I2C
+	help
+	  If you have a Sanyo LV5207LP say Y to enable the backlight driver.
+
+config BACKLIGHT_BD6107
+	tristate "Rohm BD6107 Backlight"
+	depends on I2C
+	help
+	  If you have a Rohm BD6107 say Y to enable the backlight driver.
+
+config BACKLIGHT_ARCXCNN
+	tristate "Backlight driver for the Arctic Sands ARCxCnnnn family"
+	depends on I2C
+	help
+	  If you have an ARCxCnnnn family backlight say Y to enable
+	  the backlight driver.
+
+config BACKLIGHT_RAVE_SP
+	tristate "RAVE SP Backlight driver"
+	depends on RAVE_SP_CORE
+	help
+	  Support for backlight control on RAVE SP device.
+
+endif # BACKLIGHT_CLASS_DEVICE
+
+endif # BACKLIGHT_LCD_SUPPORT