Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

13 files changed, 1971 insertions, 0 deletions

diff --git a/include/media/drv-intf/cx2341x.h b/include/media/drv-intf/cx2341x.h
new file mode 100644
index 000000000..33a97bfce
--- /dev/null
+++ b/include/media/drv-intf/cx2341x.h
@@ -0,0 +1,295 @@
+/*
+    cx23415/6/8 header containing common defines.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef CX2341X_H
+#define CX2341X_H
+
+#include <media/v4l2-ctrls.h>
+
+enum cx2341x_port {
+	CX2341X_PORT_MEMORY    = 0,
+	CX2341X_PORT_STREAMING = 1,
+	CX2341X_PORT_SERIAL    = 2
+};
+
+enum cx2341x_cap {
+	CX2341X_CAP_HAS_SLICED_VBI = 1 << 0,
+	CX2341X_CAP_HAS_TS	   = 1 << 1,
+	CX2341X_CAP_HAS_AC3	   = 1 << 2,
+};
+
+struct cx2341x_mpeg_params {
+	/* misc */
+	u32 capabilities;
+	enum cx2341x_port port;
+	u16 width;
+	u16 height;
+	u16 is_50hz;
+
+	/* stream */
+	enum v4l2_mpeg_stream_type stream_type;
+	enum v4l2_mpeg_stream_vbi_fmt stream_vbi_fmt;
+	u16 stream_insert_nav_packets;
+
+	/* audio */
+	enum v4l2_mpeg_audio_sampling_freq audio_sampling_freq;
+	enum v4l2_mpeg_audio_encoding audio_encoding;
+	enum v4l2_mpeg_audio_l2_bitrate audio_l2_bitrate;
+	enum v4l2_mpeg_audio_ac3_bitrate audio_ac3_bitrate;
+	enum v4l2_mpeg_audio_mode audio_mode;
+	enum v4l2_mpeg_audio_mode_extension audio_mode_extension;
+	enum v4l2_mpeg_audio_emphasis audio_emphasis;
+	enum v4l2_mpeg_audio_crc audio_crc;
+	u32 audio_properties;
+	u16 audio_mute;
+
+	/* video */
+	enum v4l2_mpeg_video_encoding video_encoding;
+	enum v4l2_mpeg_video_aspect video_aspect;
+	u16 video_b_frames;
+	u16 video_gop_size;
+	u16 video_gop_closure;
+	enum v4l2_mpeg_video_bitrate_mode video_bitrate_mode;
+	u32 video_bitrate;
+	u32 video_bitrate_peak;
+	u16 video_temporal_decimation;
+	u16 video_mute;
+	u32 video_mute_yuv;
+
+	/* encoding filters */
+	enum v4l2_mpeg_cx2341x_video_spatial_filter_mode video_spatial_filter_mode;
+	u16 video_spatial_filter;
+	enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type video_luma_spatial_filter_type;
+	enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type video_chroma_spatial_filter_type;
+	enum v4l2_mpeg_cx2341x_video_temporal_filter_mode video_temporal_filter_mode;
+	u16 video_temporal_filter;
+	enum v4l2_mpeg_cx2341x_video_median_filter_type video_median_filter_type;
+	u16 video_luma_median_filter_top;
+	u16 video_luma_median_filter_bottom;
+	u16 video_chroma_median_filter_top;
+	u16 video_chroma_median_filter_bottom;
+};
+
+#define CX2341X_MBOX_MAX_DATA 16
+
+extern const u32 cx2341x_mpeg_ctrls[];
+typedef int (*cx2341x_mbox_func)(void *priv, u32 cmd, int in, int out,
+		u32 data[CX2341X_MBOX_MAX_DATA]);
+int cx2341x_update(void *priv, cx2341x_mbox_func func,
+		const struct cx2341x_mpeg_params *old,
+		const struct cx2341x_mpeg_params *new);
+int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
+		struct v4l2_queryctrl *qctrl);
+const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id);
+int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
+		struct v4l2_ext_controls *ctrls, unsigned int cmd);
+void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p);
+void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix);
+
+struct cx2341x_handler;
+
+struct cx2341x_handler_ops {
+	/* needed for the video clock freq */
+	int (*s_audio_sampling_freq)(struct cx2341x_handler *hdl, u32 val);
+	/* needed for dualwatch */
+	int (*s_audio_mode)(struct cx2341x_handler *hdl, u32 val);
+	/* needed for setting up the video resolution */
+	int (*s_video_encoding)(struct cx2341x_handler *hdl, u32 val);
+	/* needed for setting up the sliced vbi insertion data structures */
+	int (*s_stream_vbi_fmt)(struct cx2341x_handler *hdl, u32 val);
+};
+
+struct cx2341x_handler {
+	u32 capabilities;
+	enum cx2341x_port port;
+	u16 width;
+	u16 height;
+	u16 is_50hz;
+	u32 audio_properties;
+
+	struct v4l2_ctrl_handler hdl;
+	void *priv;
+	cx2341x_mbox_func func;
+	const struct cx2341x_handler_ops *ops;
+
+	struct v4l2_ctrl *stream_vbi_fmt;
+
+	struct {
+		/* audio cluster */
+		struct v4l2_ctrl *audio_sampling_freq;
+		struct v4l2_ctrl *audio_encoding;
+		struct v4l2_ctrl *audio_l2_bitrate;
+		struct v4l2_ctrl *audio_mode;
+		struct v4l2_ctrl *audio_mode_extension;
+		struct v4l2_ctrl *audio_emphasis;
+		struct v4l2_ctrl *audio_crc;
+		struct v4l2_ctrl *audio_ac3_bitrate;
+	};
+
+	struct {
+		/* video gop cluster */
+		struct v4l2_ctrl *video_b_frames;
+		struct v4l2_ctrl *video_gop_size;
+	};
+
+	struct {
+		/* stream type cluster */
+		struct v4l2_ctrl *stream_type;
+		struct v4l2_ctrl *video_encoding;
+		struct v4l2_ctrl *video_bitrate_mode;
+		struct v4l2_ctrl *video_bitrate;
+		struct v4l2_ctrl *video_bitrate_peak;
+	};
+
+	struct {
+		/* video mute cluster */
+		struct v4l2_ctrl *video_mute;
+		struct v4l2_ctrl *video_mute_yuv;
+	};
+
+	struct {
+		/* video filter mode cluster */
+		struct v4l2_ctrl *video_spatial_filter_mode;
+		struct v4l2_ctrl *video_temporal_filter_mode;
+		struct v4l2_ctrl *video_median_filter_type;
+	};
+
+	struct {
+		/* video filter type cluster */
+		struct v4l2_ctrl *video_luma_spatial_filter_type;
+		struct v4l2_ctrl *video_chroma_spatial_filter_type;
+	};
+
+	struct  {
+		/* video filter cluster */
+		struct v4l2_ctrl *video_spatial_filter;
+		struct v4l2_ctrl *video_temporal_filter;
+	};
+
+	struct {
+		/* video median cluster */
+		struct v4l2_ctrl *video_luma_median_filter_top;
+		struct v4l2_ctrl *video_luma_median_filter_bottom;
+		struct v4l2_ctrl *video_chroma_median_filter_top;
+		struct v4l2_ctrl *video_chroma_median_filter_bottom;
+	};
+};
+
+int cx2341x_handler_init(struct cx2341x_handler *cxhdl,
+			 unsigned nr_of_controls_hint);
+void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz);
+int cx2341x_handler_setup(struct cx2341x_handler *cxhdl);
+void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy);
+
+/* Firmware names */
+#define CX2341X_FIRM_ENC_FILENAME "v4l-cx2341x-enc.fw"
+/* Decoder firmware for the cx23415 only */
+#define CX2341X_FIRM_DEC_FILENAME "v4l-cx2341x-dec.fw"
+
+/* Firmware API commands */
+
+/* MPEG decoder API, specific to the cx23415 */
+#define CX2341X_DEC_PING_FW			0x00
+#define CX2341X_DEC_START_PLAYBACK		0x01
+#define CX2341X_DEC_STOP_PLAYBACK		0x02
+#define CX2341X_DEC_SET_PLAYBACK_SPEED		0x03
+#define CX2341X_DEC_STEP_VIDEO			0x05
+#define CX2341X_DEC_SET_DMA_BLOCK_SIZE		0x08
+#define CX2341X_DEC_GET_XFER_INFO		0x09
+#define CX2341X_DEC_GET_DMA_STATUS		0x0a
+#define CX2341X_DEC_SCHED_DMA_FROM_HOST		0x0b
+#define CX2341X_DEC_PAUSE_PLAYBACK		0x0d
+#define CX2341X_DEC_HALT_FW			0x0e
+#define CX2341X_DEC_SET_STANDARD		0x10
+#define CX2341X_DEC_GET_VERSION			0x11
+#define CX2341X_DEC_SET_STREAM_INPUT		0x14
+#define CX2341X_DEC_GET_TIMING_INFO		0x15
+#define CX2341X_DEC_SET_AUDIO_MODE		0x16
+#define CX2341X_DEC_SET_EVENT_NOTIFICATION	0x17
+#define CX2341X_DEC_SET_DISPLAY_BUFFERS		0x18
+#define CX2341X_DEC_EXTRACT_VBI			0x19
+#define CX2341X_DEC_SET_DECODER_SOURCE		0x1a
+#define CX2341X_DEC_SET_PREBUFFERING		0x1e
+
+/* MPEG encoder API */
+#define CX2341X_ENC_PING_FW			0x80
+#define CX2341X_ENC_START_CAPTURE		0x81
+#define CX2341X_ENC_STOP_CAPTURE		0x82
+#define CX2341X_ENC_SET_AUDIO_ID		0x89
+#define CX2341X_ENC_SET_VIDEO_ID		0x8b
+#define CX2341X_ENC_SET_PCR_ID			0x8d
+#define CX2341X_ENC_SET_FRAME_RATE		0x8f
+#define CX2341X_ENC_SET_FRAME_SIZE		0x91
+#define CX2341X_ENC_SET_BIT_RATE		0x95
+#define CX2341X_ENC_SET_GOP_PROPERTIES		0x97
+#define CX2341X_ENC_SET_ASPECT_RATIO		0x99
+#define CX2341X_ENC_SET_DNR_FILTER_MODE		0x9b
+#define CX2341X_ENC_SET_DNR_FILTER_PROPS	0x9d
+#define CX2341X_ENC_SET_CORING_LEVELS		0x9f
+#define CX2341X_ENC_SET_SPATIAL_FILTER_TYPE	0xa1
+#define CX2341X_ENC_SET_VBI_LINE		0xb7
+#define CX2341X_ENC_SET_STREAM_TYPE		0xb9
+#define CX2341X_ENC_SET_OUTPUT_PORT		0xbb
+#define CX2341X_ENC_SET_AUDIO_PROPERTIES	0xbd
+#define CX2341X_ENC_HALT_FW			0xc3
+#define CX2341X_ENC_GET_VERSION			0xc4
+#define CX2341X_ENC_SET_GOP_CLOSURE		0xc5
+#define CX2341X_ENC_GET_SEQ_END			0xc6
+#define CX2341X_ENC_SET_PGM_INDEX_INFO		0xc7
+#define CX2341X_ENC_SET_VBI_CONFIG		0xc8
+#define CX2341X_ENC_SET_DMA_BLOCK_SIZE		0xc9
+#define CX2341X_ENC_GET_PREV_DMA_INFO_MB_10	0xca
+#define CX2341X_ENC_GET_PREV_DMA_INFO_MB_9	0xcb
+#define CX2341X_ENC_SCHED_DMA_TO_HOST		0xcc
+#define CX2341X_ENC_INITIALIZE_INPUT		0xcd
+#define CX2341X_ENC_SET_FRAME_DROP_RATE		0xd0
+#define CX2341X_ENC_PAUSE_ENCODER		0xd2
+#define CX2341X_ENC_REFRESH_INPUT		0xd3
+#define CX2341X_ENC_SET_COPYRIGHT		0xd4
+#define CX2341X_ENC_SET_EVENT_NOTIFICATION	0xd5
+#define CX2341X_ENC_SET_NUM_VSYNC_LINES		0xd6
+#define CX2341X_ENC_SET_PLACEHOLDER		0xd7
+#define CX2341X_ENC_MUTE_VIDEO			0xd9
+#define CX2341X_ENC_MUTE_AUDIO			0xda
+#define CX2341X_ENC_SET_VERT_CROP_LINE		0xdb
+#define CX2341X_ENC_MISC			0xdc
+
+/* OSD API, specific to the cx23415 */
+#define CX2341X_OSD_GET_FRAMEBUFFER		0x41
+#define CX2341X_OSD_GET_PIXEL_FORMAT		0x42
+#define CX2341X_OSD_SET_PIXEL_FORMAT		0x43
+#define CX2341X_OSD_GET_STATE			0x44
+#define CX2341X_OSD_SET_STATE			0x45
+#define CX2341X_OSD_GET_OSD_COORDS		0x46
+#define CX2341X_OSD_SET_OSD_COORDS		0x47
+#define CX2341X_OSD_GET_SCREEN_COORDS		0x48
+#define CX2341X_OSD_SET_SCREEN_COORDS		0x49
+#define CX2341X_OSD_GET_GLOBAL_ALPHA		0x4a
+#define CX2341X_OSD_SET_GLOBAL_ALPHA		0x4b
+#define CX2341X_OSD_SET_BLEND_COORDS		0x4c
+#define CX2341X_OSD_GET_FLICKER_STATE		0x4f
+#define CX2341X_OSD_SET_FLICKER_STATE		0x50
+#define CX2341X_OSD_BLT_COPY			0x52
+#define CX2341X_OSD_BLT_FILL			0x53
+#define CX2341X_OSD_BLT_TEXT			0x54
+#define CX2341X_OSD_SET_FRAMEBUFFER_WINDOW	0x56
+#define CX2341X_OSD_SET_CHROMA_KEY		0x60
+#define CX2341X_OSD_GET_ALPHA_CONTENT_INDEX	0x61
+#define CX2341X_OSD_SET_ALPHA_CONTENT_INDEX	0x62
+
+#endif /* CX2341X_H */
diff --git a/include/media/drv-intf/cx25840.h b/include/media/drv-intf/cx25840.h
new file mode 100644
index 000000000..783c5bdd6
--- /dev/null
+++ b/include/media/drv-intf/cx25840.h
@@ -0,0 +1,188 @@
+/*
+    cx25840.h - definition for cx25840/1/2/3 inputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _CX25840_H_
+#define _CX25840_H_
+
+/* Note that the cx25840 driver requires that the bridge driver calls the
+   v4l2_subdev's init operation in order to load the driver's firmware.
+   Without this the audio standard detection will fail and you will
+   only get mono.
+
+   Since loading the firmware is often problematic when the driver is
+   compiled into the kernel I recommend postponing calling this function
+   until the first open of the video device. Another reason for
+   postponing it is that loading this firmware takes a long time (seconds)
+   due to the slow i2c bus speed. So it will speed up the boot process if
+   you can avoid loading the fw as long as the video device isn't used. */
+
+enum cx25840_video_input {
+	/* Composite video inputs In1-In8 */
+	CX25840_COMPOSITE1 = 1,
+	CX25840_COMPOSITE2,
+	CX25840_COMPOSITE3,
+	CX25840_COMPOSITE4,
+	CX25840_COMPOSITE5,
+	CX25840_COMPOSITE6,
+	CX25840_COMPOSITE7,
+	CX25840_COMPOSITE8,
+
+	/* S-Video inputs consist of one luma input (In1-In8) ORed with one
+	   chroma input (In5-In8) */
+	CX25840_SVIDEO_LUMA1 = 0x10,
+	CX25840_SVIDEO_LUMA2 = 0x20,
+	CX25840_SVIDEO_LUMA3 = 0x30,
+	CX25840_SVIDEO_LUMA4 = 0x40,
+	CX25840_SVIDEO_LUMA5 = 0x50,
+	CX25840_SVIDEO_LUMA6 = 0x60,
+	CX25840_SVIDEO_LUMA7 = 0x70,
+	CX25840_SVIDEO_LUMA8 = 0x80,
+	CX25840_SVIDEO_CHROMA4 = 0x400,
+	CX25840_SVIDEO_CHROMA5 = 0x500,
+	CX25840_SVIDEO_CHROMA6 = 0x600,
+	CX25840_SVIDEO_CHROMA7 = 0x700,
+	CX25840_SVIDEO_CHROMA8 = 0x800,
+
+	/* S-Video aliases for common luma/chroma combinations */
+	CX25840_SVIDEO1 = 0x510,
+	CX25840_SVIDEO2 = 0x620,
+	CX25840_SVIDEO3 = 0x730,
+	CX25840_SVIDEO4 = 0x840,
+
+	/* Allow frames to specify specific input configurations */
+	CX25840_VIN1_CH1  = 0x80000000,
+	CX25840_VIN2_CH1  = 0x80000001,
+	CX25840_VIN3_CH1  = 0x80000002,
+	CX25840_VIN4_CH1  = 0x80000003,
+	CX25840_VIN5_CH1  = 0x80000004,
+	CX25840_VIN6_CH1  = 0x80000005,
+	CX25840_VIN7_CH1  = 0x80000006,
+	CX25840_VIN8_CH1  = 0x80000007,
+	CX25840_VIN4_CH2  = 0x80000000,
+	CX25840_VIN5_CH2  = 0x80000010,
+	CX25840_VIN6_CH2  = 0x80000020,
+	CX25840_NONE_CH2  = 0x80000030,
+	CX25840_VIN7_CH3  = 0x80000000,
+	CX25840_VIN8_CH3  = 0x80000040,
+	CX25840_NONE0_CH3 = 0x80000080,
+	CX25840_NONE1_CH3 = 0x800000c0,
+	CX25840_SVIDEO_ON = 0x80000100,
+	CX25840_COMPONENT_ON = 0x80000200,
+	CX25840_DIF_ON = 0x80000400,
+};
+
+enum cx25840_audio_input {
+	/* Audio inputs: serial or In4-In8 */
+	CX25840_AUDIO_SERIAL,
+	CX25840_AUDIO4 = 4,
+	CX25840_AUDIO5,
+	CX25840_AUDIO6,
+	CX25840_AUDIO7,
+	CX25840_AUDIO8,
+};
+
+enum cx25840_io_pin {
+	CX25840_PIN_DVALID_PRGM0 = 0,
+	CX25840_PIN_FIELD_PRGM1,
+	CX25840_PIN_HRESET_PRGM2,
+	CX25840_PIN_VRESET_HCTL_PRGM3,
+	CX25840_PIN_IRQ_N_PRGM4,
+	CX25840_PIN_IR_TX_PRGM6,
+	CX25840_PIN_IR_RX_PRGM5,
+	CX25840_PIN_GPIO0_PRGM8,
+	CX25840_PIN_GPIO1_PRGM9,
+	CX25840_PIN_SA_SDIN,		/* Alternate GP Input only */
+	CX25840_PIN_SA_SDOUT,		/* Alternate GP Input only */
+	CX25840_PIN_PLL_CLK_PRGM7,
+	CX25840_PIN_CHIP_SEL_VIPCLK,	/* Output only */
+};
+
+enum cx25840_io_pad {
+	/* Output pads */
+	CX25840_PAD_DEFAULT = 0,
+	CX25840_PAD_ACTIVE,
+	CX25840_PAD_VACTIVE,
+	CX25840_PAD_CBFLAG,
+	CX25840_PAD_VID_DATA_EXT0,
+	CX25840_PAD_VID_DATA_EXT1,
+	CX25840_PAD_GPO0,
+	CX25840_PAD_GPO1,
+	CX25840_PAD_GPO2,
+	CX25840_PAD_GPO3,
+	CX25840_PAD_IRQ_N,
+	CX25840_PAD_AC_SYNC,
+	CX25840_PAD_AC_SDOUT,
+	CX25840_PAD_PLL_CLK,
+	CX25840_PAD_VRESET,
+	CX25840_PAD_RESERVED,
+	/* Pads for PLL_CLK output only */
+	CX25840_PAD_XTI_X5_DLL,
+	CX25840_PAD_AUX_PLL,
+	CX25840_PAD_VID_PLL,
+	CX25840_PAD_XTI,
+	/* Input Pads */
+	CX25840_PAD_GPI0,
+	CX25840_PAD_GPI1,
+	CX25840_PAD_GPI2,
+	CX25840_PAD_GPI3,
+};
+
+enum cx25840_io_pin_strength {
+	CX25840_PIN_DRIVE_MEDIUM = 0,
+	CX25840_PIN_DRIVE_SLOW,
+	CX25840_PIN_DRIVE_FAST,
+};
+
+enum cx23885_io_pin {
+	CX23885_PIN_IR_RX_GPIO19,
+	CX23885_PIN_IR_TX_GPIO20,
+	CX23885_PIN_I2S_SDAT_GPIO21,
+	CX23885_PIN_I2S_WCLK_GPIO22,
+	CX23885_PIN_I2S_BCLK_GPIO23,
+	CX23885_PIN_IRQ_N_GPIO16,
+};
+
+enum cx23885_io_pad {
+	CX23885_PAD_IR_RX,
+	CX23885_PAD_GPIO19,
+	CX23885_PAD_IR_TX,
+	CX23885_PAD_GPIO20,
+	CX23885_PAD_I2S_SDAT,
+	CX23885_PAD_GPIO21,
+	CX23885_PAD_I2S_WCLK,
+	CX23885_PAD_GPIO22,
+	CX23885_PAD_I2S_BCLK,
+	CX23885_PAD_GPIO23,
+	CX23885_PAD_IRQ_N,
+	CX23885_PAD_GPIO16,
+};
+
+/* pvr150_workaround activates a workaround for a hardware bug that is
+   present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
+   certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
+   audio autodetect fails on some channels for these models and the workaround
+   is to select the audio standard explicitly. Many thanks to Hauppauge for
+   providing this information.
+   This platform data only needs to be supplied by the ivtv driver. */
+struct cx25840_platform_data {
+	int pvr150_workaround;
+};
+
+#endif
diff --git a/include/media/drv-intf/exynos-fimc.h b/include/media/drv-intf/exynos-fimc.h
new file mode 100644
index 000000000..f9c643388
--- /dev/null
+++ b/include/media/drv-intf/exynos-fimc.h
@@ -0,0 +1,162 @@
+/*
+ * Samsung S5P/Exynos4 SoC series camera interface driver header
+ *
+ * Copyright (C) 2010 - 2013 Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef S5P_FIMC_H_
+#define S5P_FIMC_H_
+
+#include <media/media-entity.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-mediabus.h>
+
+/*
+ * Enumeration of data inputs to the camera subsystem.
+ */
+enum fimc_input {
+	FIMC_INPUT_PARALLEL_0	= 1,
+	FIMC_INPUT_PARALLEL_1,
+	FIMC_INPUT_MIPI_CSI2_0	= 3,
+	FIMC_INPUT_MIPI_CSI2_1,
+	FIMC_INPUT_WRITEBACK_A	= 5,
+	FIMC_INPUT_WRITEBACK_B,
+	FIMC_INPUT_WRITEBACK_ISP = 5,
+};
+
+/*
+ * Enumeration of the FIMC data bus types.
+ */
+enum fimc_bus_type {
+	/* Camera parallel bus */
+	FIMC_BUS_TYPE_ITU_601 = 1,
+	/* Camera parallel bus with embedded synchronization */
+	FIMC_BUS_TYPE_ITU_656,
+	/* Camera MIPI-CSI2 serial bus */
+	FIMC_BUS_TYPE_MIPI_CSI2,
+	/* FIFO link from LCD controller (WriteBack A) */
+	FIMC_BUS_TYPE_LCD_WRITEBACK_A,
+	/* FIFO link from LCD controller (WriteBack B) */
+	FIMC_BUS_TYPE_LCD_WRITEBACK_B,
+	/* FIFO link from FIMC-IS */
+	FIMC_BUS_TYPE_ISP_WRITEBACK = FIMC_BUS_TYPE_LCD_WRITEBACK_B,
+};
+
+#define fimc_input_is_parallel(x) ((x) == 1 || (x) == 2)
+#define fimc_input_is_mipi_csi(x) ((x) == 3 || (x) == 4)
+
+/*
+ * The subdevices' group IDs.
+ */
+#define GRP_ID_SENSOR		(1 << 8)
+#define GRP_ID_FIMC_IS_SENSOR	(1 << 9)
+#define GRP_ID_WRITEBACK	(1 << 10)
+#define GRP_ID_CSIS		(1 << 11)
+#define GRP_ID_FIMC		(1 << 12)
+#define GRP_ID_FLITE		(1 << 13)
+#define GRP_ID_FIMC_IS		(1 << 14)
+
+/**
+ * struct fimc_source_info - video source description required for the host
+ *			     interface configuration
+ *
+ * @fimc_bus_type: FIMC camera input type
+ * @sensor_bus_type: image sensor bus type, MIPI, ITU-R BT.601 etc.
+ * @flags: the parallel sensor bus flags defining signals polarity (V4L2_MBUS_*)
+ * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
+ */
+struct fimc_source_info {
+	enum fimc_bus_type fimc_bus_type;
+	enum fimc_bus_type sensor_bus_type;
+	u16 flags;
+	u16 mux_id;
+};
+
+/*
+ * v4l2_device notification id. This is only for internal use in the kernel.
+ * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single
+ * frame capture mode when there is only one VSYNC pulse issued by the sensor
+ * at begining of the frame transmission.
+ */
+#define S5P_FIMC_TX_END_NOTIFY _IO('e', 0)
+
+#define FIMC_MAX_PLANES	3
+
+/**
+ * struct fimc_fmt - color format data structure
+ * @mbus_code: media bus pixel code, -1 if not applicable
+ * @name: format description
+ * @fourcc: fourcc code for this format, 0 if not applicable
+ * @color: the driver's private color format id
+ * @memplanes: number of physically non-contiguous data planes
+ * @colplanes: number of physically contiguous data planes
+ * @colorspace: v4l2 colorspace (V4L2_COLORSPACE_*)
+ * @depth: per plane driver's private 'number of bits per pixel'
+ * @mdataplanes: bitmask indicating meta data plane(s), (1 << plane_no)
+ * @flags: flags indicating which operation mode format applies to
+ */
+struct fimc_fmt {
+	u32 mbus_code;
+	char	*name;
+	u32	fourcc;
+	u32	color;
+	u16	memplanes;
+	u16	colplanes;
+	u8	colorspace;
+	u8	depth[FIMC_MAX_PLANES];
+	u16	mdataplanes;
+	u16	flags;
+#define FMT_FLAGS_CAM		(1 << 0)
+#define FMT_FLAGS_M2M_IN	(1 << 1)
+#define FMT_FLAGS_M2M_OUT	(1 << 2)
+#define FMT_FLAGS_M2M		(1 << 1 | 1 << 2)
+#define FMT_HAS_ALPHA		(1 << 3)
+#define FMT_FLAGS_COMPRESSED	(1 << 4)
+#define FMT_FLAGS_WRITEBACK	(1 << 5)
+#define FMT_FLAGS_RAW_BAYER	(1 << 6)
+#define FMT_FLAGS_YUV		(1 << 7)
+};
+
+struct exynos_media_pipeline;
+
+/*
+ * Media pipeline operations to be called from within a video node,  i.e. the
+ * last entity within the pipeline. Implemented by related media device driver.
+ */
+struct exynos_media_pipeline_ops {
+	int (*prepare)(struct exynos_media_pipeline *p,
+						struct media_entity *me);
+	int (*unprepare)(struct exynos_media_pipeline *p);
+	int (*open)(struct exynos_media_pipeline *p, struct media_entity *me,
+							bool resume);
+	int (*close)(struct exynos_media_pipeline *p);
+	int (*set_stream)(struct exynos_media_pipeline *p, bool state);
+};
+
+struct exynos_video_entity {
+	struct video_device vdev;
+	struct exynos_media_pipeline *pipe;
+};
+
+struct exynos_media_pipeline {
+	struct media_pipeline mp;
+	const struct exynos_media_pipeline_ops *ops;
+};
+
+static inline struct exynos_video_entity *vdev_to_exynos_video_entity(
+					struct video_device *vdev)
+{
+	return container_of(vdev, struct exynos_video_entity, vdev);
+}
+
+#define fimc_pipeline_call(ent, op, args...)				  \
+	((!(ent) || !(ent)->pipe) ? -ENOENT : \
+	(((ent)->pipe->ops && (ent)->pipe->ops->op) ? \
+	(ent)->pipe->ops->op(((ent)->pipe), ##args) : -ENOIOCTLCMD))	  \
+
+#endif /* S5P_FIMC_H_ */
diff --git a/include/media/drv-intf/msp3400.h b/include/media/drv-intf/msp3400.h
new file mode 100644
index 000000000..db98ce49e
--- /dev/null
+++ b/include/media/drv-intf/msp3400.h
@@ -0,0 +1,225 @@
+/*
+    msp3400.h - definition for msp3400 inputs and outputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _MSP3400_H_
+#define _MSP3400_H_
+
+/* msp3400 routing
+   ===============
+
+   The msp3400 has a complicated routing scheme with many possible
+   combinations. The details are all in the datasheets but I will try
+   to give a short description here.
+
+   Inputs
+   ======
+
+   There are 1) tuner inputs, 2) I2S inputs, 3) SCART inputs. You will have
+   to select which tuner input to use and which SCART input to use. The
+   selected tuner input, the selected SCART input and all I2S inputs go to
+   the DSP (the tuner input first goes through the demodulator).
+
+   The DSP handles things like volume, bass/treble, balance, and some chips
+   have support for surround sound. It has several outputs: MAIN, AUX, I2S
+   and SCART1/2. Each output can select which DSP input to use. So the MAIN
+   output can select the tuner input while at the same time the SCART1 output
+   uses the I2S input.
+
+   Outputs
+   =======
+
+   Most DSP outputs are also the outputs of the msp3400. However, the SCART
+   outputs of the msp3400 can select which input to use: either the SCART1 or
+   SCART2 output from the DSP, or the msp3400 SCART inputs, thus completely
+   bypassing the DSP.
+
+   Summary
+   =======
+
+   So to specify a complete routing scheme for the msp3400 you will have to
+   specify in the 'input' arg of the s_routing function:
+
+   1) which tuner input to use
+   2) which SCART input to use
+   3) which DSP input to use for each DSP output
+
+   And in the 'output' arg of the s_routing function you specify:
+
+   1) which SCART input to use for each SCART output
+
+   Depending on how the msp is wired to the other components you can
+   ignore or mute certain inputs or outputs.
+
+   Also, depending on the msp version only a subset of the inputs or
+   outputs may be present. At the end of this header some tables are
+   added containing a list of what is available for each msp version.
+ */
+
+/* Inputs to the DSP unit: two independent selections have to be made:
+   1) the tuner (SIF) input
+   2) the SCART input
+   Bits 0-2 are used for the SCART input select, bit 3 is used for the tuner
+   input, bits 4-7 are reserved.
+ */
+
+/* SCART input to DSP selection */
+#define MSP_IN_SCART1		0  /* Pin SC1_IN */
+#define MSP_IN_SCART2		1  /* Pin SC2_IN */
+#define MSP_IN_SCART3		2  /* Pin SC3_IN */
+#define MSP_IN_SCART4		3  /* Pin SC4_IN */
+#define MSP_IN_MONO		6  /* Pin MONO_IN */
+#define MSP_IN_MUTE		7  /* Mute DSP input */
+#define MSP_SCART_TO_DSP(in)	(in)
+/* Tuner input to demodulator and DSP selection */
+#define MSP_IN_TUNER1		0  /* Analog Sound IF input pin ANA_IN1 */
+#define MSP_IN_TUNER2		1  /* Analog Sound IF input pin ANA_IN2 */
+#define MSP_TUNER_TO_DSP(in)	((in) << 3)
+
+/* The msp has up to 5 DSP outputs, each output can independently select
+   a DSP input.
+
+   The DSP outputs are: loudspeaker output (aka MAIN), headphones output
+   (aka AUX), SCART1 DA output, SCART2 DA output and an I2S output.
+   There also is a quasi-peak detector output, but that is not used by
+   this driver and is set to the same input as the loudspeaker output.
+   Not all outputs are supported by all msp models. Setting the input
+   of an unsupported output will be ignored by the driver.
+
+   There are up to 16 DSP inputs to choose from, so each output is
+   assigned 4 bits.
+
+   Note: the 44x8G can mix two inputs and feed the result back to the
+   DSP. This is currently not implemented. Also not implemented is the
+   multi-channel capable I2S3 input of the 44x0G. If someone can demonstrate
+   a need for one of those features then additional support can be added. */
+#define MSP_DSP_IN_TUNER	0  /* Tuner DSP input */
+#define MSP_DSP_IN_SCART	2  /* SCART DSP input */
+#define MSP_DSP_IN_I2S1		5  /* I2S1 DSP input */
+#define MSP_DSP_IN_I2S2		6  /* I2S2 DSP input */
+#define MSP_DSP_IN_I2S3		7  /* I2S3 DSP input */
+#define MSP_DSP_IN_MAIN_AVC	11 /* MAIN AVC processed DSP input */
+#define MSP_DSP_IN_MAIN		12 /* MAIN DSP input */
+#define MSP_DSP_IN_AUX		13 /* AUX DSP input */
+#define MSP_DSP_TO_MAIN(in)	((in) << 4)
+#define MSP_DSP_TO_AUX(in)	((in) << 8)
+#define MSP_DSP_TO_SCART1(in)	((in) << 12)
+#define MSP_DSP_TO_SCART2(in)	((in) << 16)
+#define MSP_DSP_TO_I2S(in)	((in) << 20)
+
+/* Output SCART select: the SCART outputs can select which input
+   to use. */
+#define MSP_SC_IN_SCART1	0  /* SCART1 input, bypassing the DSP */
+#define MSP_SC_IN_SCART2	1  /* SCART2 input, bypassing the DSP */
+#define MSP_SC_IN_SCART3	2  /* SCART3 input, bypassing the DSP */
+#define MSP_SC_IN_SCART4	3  /* SCART4 input, bypassing the DSP */
+#define MSP_SC_IN_DSP_SCART1	4  /* DSP SCART1 input */
+#define MSP_SC_IN_DSP_SCART2	5  /* DSP SCART2 input */
+#define MSP_SC_IN_MONO		6  /* MONO input, bypassing the DSP */
+#define MSP_SC_IN_MUTE		7  /* MUTE output */
+#define MSP_SC_TO_SCART1(in)	(in)
+#define MSP_SC_TO_SCART2(in)	((in) << 4)
+
+/* Shortcut macros */
+#define MSP_INPUT(sc, t, main_aux_src, sc_i2s_src) \
+	(MSP_SCART_TO_DSP(sc) | \
+	 MSP_TUNER_TO_DSP(t) | \
+	 MSP_DSP_TO_MAIN(main_aux_src) | \
+	 MSP_DSP_TO_AUX(main_aux_src) | \
+	 MSP_DSP_TO_SCART1(sc_i2s_src) | \
+	 MSP_DSP_TO_SCART2(sc_i2s_src) | \
+	 MSP_DSP_TO_I2S(sc_i2s_src))
+#define MSP_INPUT_DEFAULT MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, \
+				    MSP_DSP_IN_TUNER, MSP_DSP_IN_TUNER)
+#define MSP_OUTPUT(sc) \
+	(MSP_SC_TO_SCART1(sc) | \
+	 MSP_SC_TO_SCART2(sc))
+/* This equals the RESET position of the msp3400 ACB register */
+#define MSP_OUTPUT_DEFAULT (MSP_SC_TO_SCART1(MSP_SC_IN_SCART3) | \
+			    MSP_SC_TO_SCART2(MSP_SC_IN_DSP_SCART1))
+
+/* Tuner inputs vs. msp version */
+/* Chip      TUNER_1   TUNER_2
+   -------------------------
+   msp34x0b  y         y
+   msp34x0c  y         y
+   msp34x0d  y         y
+   msp34x5d  y         n
+   msp34x7d  y         n
+   msp34x0g  y         y
+   msp34x1g  y         y
+   msp34x2g  y         y
+   msp34x5g  y         n
+   msp34x7g  y         n
+   msp44x0g  y         y
+   msp44x8g  y         y
+ */
+
+/* SCART inputs vs. msp version */
+/* Chip      SC1 SC2 SC3 SC4
+   -------------------------
+   msp34x0b  y   y   y   n
+   msp34x0c  y   y   y   n
+   msp34x0d  y   y   y   y
+   msp34x5d  y   y   n   n
+   msp34x7d  y   n   n   n
+   msp34x0g  y   y   y   y
+   msp34x1g  y   y   y   y
+   msp34x2g  y   y   y   y
+   msp34x5g  y   y   n   n
+   msp34x7g  y   n   n   n
+   msp44x0g  y   y   y   y
+   msp44x8g  y   y   y   y
+ */
+
+/* DSP inputs vs. msp version (tuner and SCART inputs are always available) */
+/* Chip      I2S1 I2S2 I2S3 MAIN_AVC MAIN AUX
+   ------------------------------------------
+   msp34x0b  y    n    n    n        n    n
+   msp34x0c  y    y    n    n        n    n
+   msp34x0d  y    y    n    n        n    n
+   msp34x5d  y    y    n    n        n    n
+   msp34x7d  n    n    n    n        n    n
+   msp34x0g  y    y    n    n        n    n
+   msp34x1g  y    y    n    n        n    n
+   msp34x2g  y    y    n    y        y    y
+   msp34x5g  y    y    n    n        n    n
+   msp34x7g  n    n    n    n        n    n
+   msp44x0g  y    y    y    y        y    y
+   msp44x8g  y    y    y    n        n    n
+ */
+
+/* DSP outputs vs. msp version */
+/* Chip      MAIN AUX SCART1 SCART2 I2S
+   ------------------------------------
+   msp34x0b  y    y   y      n      y
+   msp34x0c  y    y   y      n      y
+   msp34x0d  y    y   y      y      y
+   msp34x5d  y    n   y      n      y
+   msp34x7d  y    n   y      n      n
+   msp34x0g  y    y   y      y      y
+   msp34x1g  y    y   y      y      y
+   msp34x2g  y    y   y      y      y
+   msp34x5g  y    n   y      n      y
+   msp34x7g  y    n   y      n      n
+   msp44x0g  y    y   y      y      y
+   msp44x8g  y    y   y      y      y
+ */
+
+#endif /* MSP3400_H */
diff --git a/include/media/drv-intf/renesas-ceu.h b/include/media/drv-intf/renesas-ceu.h
new file mode 100644
index 000000000..52841d1b4
--- /dev/null
+++ b/include/media/drv-intf/renesas-ceu.h
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * renesas-ceu.h - Renesas CEU driver interface
+ *
+ * Copyright 2017-2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#ifndef __MEDIA_DRV_INTF_RENESAS_CEU_H__
+#define __MEDIA_DRV_INTF_RENESAS_CEU_H__
+
+#define CEU_MAX_SUBDEVS		2
+
+struct ceu_async_subdev {
+	unsigned long flags;
+	unsigned char bus_width;
+	unsigned char bus_shift;
+	unsigned int i2c_adapter_id;
+	unsigned int i2c_address;
+};
+
+struct ceu_platform_data {
+	unsigned int num_subdevs;
+	struct ceu_async_subdev subdevs[CEU_MAX_SUBDEVS];
+};
+
+#endif /* ___MEDIA_DRV_INTF_RENESAS_CEU_H__ */
diff --git a/include/media/drv-intf/s3c_camif.h b/include/media/drv-intf/s3c_camif.h
new file mode 100644
index 000000000..df96c2c78
--- /dev/null
+++ b/include/media/drv-intf/s3c_camif.h
@@ -0,0 +1,45 @@
+/*
+ * s3c24xx/s3c64xx SoC series Camera Interface (CAMIF) driver
+ *
+ * Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef MEDIA_S3C_CAMIF_
+#define MEDIA_S3C_CAMIF_
+
+#include <linux/i2c.h>
+#include <media/v4l2-mediabus.h>
+
+/**
+ * struct s3c_camif_sensor_info - an image sensor description
+ * @i2c_board_info: pointer to an I2C sensor subdevice board info
+ * @clock_frequency: frequency of the clock the host provides to a sensor
+ * @mbus_type: media bus type
+ * @i2c_bus_num: i2c control bus id the sensor is attached to
+ * @flags: the parallel bus flags defining signals polarity (V4L2_MBUS_*)
+ * @use_field: 1 if parallel bus FIELD signal is used (only s3c64xx)
+ */
+struct s3c_camif_sensor_info {
+	struct i2c_board_info i2c_board_info;
+	unsigned long clock_frequency;
+	enum v4l2_mbus_type mbus_type;
+	u16 i2c_bus_num;
+	u16 flags;
+	u8 use_field;
+};
+
+struct s3c_camif_plat_data {
+	struct s3c_camif_sensor_info sensor;
+	int (*gpio_get)(void);
+	int (*gpio_put)(void);
+};
+
+/* Platform default helper functions */
+int s3c_camif_gpio_get(void);
+int s3c_camif_gpio_put(void);
+
+#endif /* MEDIA_S3C_CAMIF_ */
diff --git a/include/media/drv-intf/saa7146.h b/include/media/drv-intf/saa7146.h
new file mode 100644
index 000000000..a7bf2c4a2
--- /dev/null
+++ b/include/media/drv-intf/saa7146.h
@@ -0,0 +1,472 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SAA7146__
+#define __SAA7146__
+
+#include <linux/delay.h>	/* for delay-stuff */
+#include <linux/slab.h>		/* for kmalloc/kfree */
+#include <linux/pci.h>		/* for pci-config-stuff, vendor ids etc. */
+#include <linux/init.h>		/* for "__init" */
+#include <linux/interrupt.h>	/* for IMMEDIATE_BH */
+#include <linux/kmod.h>		/* for kernel module loader */
+#include <linux/i2c.h>		/* for i2c subsystem */
+#include <asm/io.h>		/* for accessing devices */
+#include <linux/stringify.h>
+#include <linux/mutex.h>
+#include <linux/scatterlist.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+
+#include <linux/vmalloc.h>	/* for vmalloc() */
+#include <linux/mm.h>		/* for vmalloc_to_page() */
+
+#define saa7146_write(sxy,adr,dat)    writel((dat),(sxy->mem+(adr)))
+#define saa7146_read(sxy,adr)         readl(sxy->mem+(adr))
+
+extern unsigned int saa7146_debug;
+
+#ifndef DEBUG_VARIABLE
+	#define DEBUG_VARIABLE saa7146_debug
+#endif
+
+#define ERR(fmt, ...)	pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define _DBG(mask, fmt, ...)						\
+do {									\
+	if (DEBUG_VARIABLE & mask)					\
+		pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__);	\
+} while (0)
+
+/* simple debug messages */
+#define DEB_S(fmt, ...)		_DBG(0x01, fmt, ##__VA_ARGS__)
+/* more detailed debug messages */
+#define DEB_D(fmt, ...)		_DBG(0x02, fmt, ##__VA_ARGS__)
+/* print enter and exit of functions */
+#define DEB_EE(fmt, ...)	_DBG(0x04, fmt, ##__VA_ARGS__)
+/* i2c debug messages */
+#define DEB_I2C(fmt, ...)	_DBG(0x08, fmt, ##__VA_ARGS__)
+/* vbi debug messages */
+#define DEB_VBI(fmt, ...)	_DBG(0x10, fmt, ##__VA_ARGS__)
+/* interrupt debug messages */
+#define DEB_INT(fmt, ...)	_DBG(0x20, fmt, ##__VA_ARGS__)
+/* capture debug messages */
+#define DEB_CAP(fmt, ...)	_DBG(0x40, fmt, ##__VA_ARGS__)
+
+#define SAA7146_ISR_CLEAR(x,y) \
+	saa7146_write(x, ISR, (y));
+
+struct module;
+
+struct saa7146_dev;
+struct saa7146_extension;
+struct saa7146_vv;
+
+/* saa7146 page table */
+struct saa7146_pgtable {
+	unsigned int	size;
+	__le32		*cpu;
+	dma_addr_t	dma;
+	/* used for offsets for u,v planes for planar capture modes */
+	unsigned long	offset;
+	/* used for custom pagetables (used for example by budget dvb cards) */
+	struct scatterlist *slist;
+	int		nents;
+};
+
+struct saa7146_pci_extension_data {
+	struct saa7146_extension *ext;
+	void *ext_priv;			/* most likely a name string */
+};
+
+#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device)		\
+	{							\
+		.vendor    = PCI_VENDOR_ID_PHILIPS,		\
+		.device	   = PCI_DEVICE_ID_PHILIPS_SAA7146,	\
+		.subvendor = x_vendor,				\
+		.subdevice = x_device,				\
+		.driver_data = (unsigned long)& x_var,		\
+	}
+
+struct saa7146_extension
+{
+	char	name[32];		/* name of the device */
+#define SAA7146_USE_I2C_IRQ	0x1
+#define SAA7146_I2C_SHORT_DELAY	0x2
+	int	flags;
+
+	/* pairs of subvendor and subdevice ids for
+	   supported devices, last entry 0xffff, 0xfff */
+	struct module *module;
+	struct pci_driver driver;
+	const struct pci_device_id *pci_tbl;
+
+	/* extension functions */
+	int (*probe)(struct saa7146_dev *);
+	int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *);
+	int (*detach)(struct saa7146_dev*);
+
+	u32	irq_mask;	/* mask to indicate, which irq-events are handled by the extension */
+	void	(*irq_func)(struct saa7146_dev*, u32* irq_mask);
+};
+
+struct saa7146_dma
+{
+	dma_addr_t	dma_handle;
+	__le32		*cpu_addr;
+};
+
+struct saa7146_dev
+{
+	struct module			*module;
+
+	struct v4l2_device		v4l2_dev;
+	struct v4l2_ctrl_handler	ctrl_handler;
+
+	/* different device locks */
+	spinlock_t			slock;
+	struct mutex			v4l2_lock;
+
+	unsigned char			__iomem *mem;		/* pointer to mapped IO memory */
+	u32				revision;	/* chip revision; needed for bug-workarounds*/
+
+	/* pci-device & irq stuff*/
+	char				name[32];
+	struct pci_dev			*pci;
+	u32				int_todo;
+	spinlock_t			int_slock;
+
+	/* extension handling */
+	struct saa7146_extension	*ext;		/* indicates if handled by extension */
+	void				*ext_priv;	/* pointer for extension private use (most likely some private data) */
+	struct saa7146_ext_vv		*ext_vv_data;
+
+	/* per device video/vbi informations (if available) */
+	struct saa7146_vv	*vv_data;
+	void (*vv_callback)(struct saa7146_dev *dev, unsigned long status);
+
+	/* i2c-stuff */
+	struct mutex			i2c_lock;
+
+	u32				i2c_bitrate;
+	struct saa7146_dma		d_i2c;	/* pointer to i2c memory */
+	wait_queue_head_t		i2c_wq;
+	int				i2c_op;
+
+	/* memories */
+	struct saa7146_dma		d_rps0;
+	struct saa7146_dma		d_rps1;
+};
+
+static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct saa7146_dev, v4l2_dev);
+}
+
+/* from saa7146_i2c.c */
+int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate);
+
+/* from saa7146_core.c */
+int saa7146_register_extension(struct saa7146_extension*);
+int saa7146_unregister_extension(struct saa7146_extension*);
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc);
+int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
+void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
+int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
+void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt);
+void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt);
+void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data);
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop);
+
+/* some memory sizes */
+#define SAA7146_I2C_MEM		( 1*PAGE_SIZE)
+#define SAA7146_RPS_MEM		( 1*PAGE_SIZE)
+
+/* some i2c constants */
+#define SAA7146_I2C_TIMEOUT	100	/* i2c-timeout-value in ms */
+#define SAA7146_I2C_RETRIES	3	/* how many times shall we retry an i2c-operation? */
+#define SAA7146_I2C_DELAY	5	/* time we wait after certain i2c-operations */
+
+/* unsorted defines */
+#define ME1    0x0000000800
+#define PV1    0x0000000008
+
+/* gpio defines */
+#define SAA7146_GPIO_INPUT 0x00
+#define SAA7146_GPIO_IRQHI 0x10
+#define SAA7146_GPIO_IRQLO 0x20
+#define SAA7146_GPIO_IRQHL 0x30
+#define SAA7146_GPIO_OUTLO 0x40
+#define SAA7146_GPIO_OUTHI 0x50
+
+/* debi defines */
+#define DEBINOSWAP 0x000e0000
+
+/* define for the register programming sequencer (rps) */
+#define CMD_NOP		0x00000000  /* No operation */
+#define CMD_CLR_EVENT	0x00000000  /* Clear event */
+#define CMD_SET_EVENT	0x10000000  /* Set signal event */
+#define CMD_PAUSE	0x20000000  /* Pause */
+#define CMD_CHECK_LATE	0x30000000  /* Check late */
+#define CMD_UPLOAD	0x40000000  /* Upload */
+#define CMD_STOP	0x50000000  /* Stop */
+#define CMD_INTERRUPT	0x60000000  /* Interrupt */
+#define CMD_JUMP	0x80000000  /* Jump */
+#define CMD_WR_REG	0x90000000  /* Write (load) register */
+#define CMD_RD_REG	0xa0000000  /* Read (store) register */
+#define CMD_WR_REG_MASK	0xc0000000  /* Write register with mask */
+
+#define CMD_OAN		MASK_27
+#define CMD_INV		MASK_26
+#define CMD_SIG4	MASK_25
+#define CMD_SIG3	MASK_24
+#define CMD_SIG2	MASK_23
+#define CMD_SIG1	MASK_22
+#define CMD_SIG0	MASK_21
+#define CMD_O_FID_B	MASK_14
+#define CMD_E_FID_B	MASK_13
+#define CMD_O_FID_A	MASK_12
+#define CMD_E_FID_A	MASK_11
+
+/* some events and command modifiers for rps1 squarewave generator */
+#define EVT_HS          (1<<15)     // Source Line Threshold reached
+#define EVT_VBI_B       (1<<9)      // VSYNC Event
+#define RPS_OAN         (1<<27)     // 1: OR events, 0: AND events
+#define RPS_INV         (1<<26)     // Invert (compound) event
+#define GPIO3_MSK       0xFF000000  // GPIO #3 control bits
+
+/* Bit mask constants */
+#define MASK_00   0x00000001    /* Mask value for bit 0 */
+#define MASK_01   0x00000002    /* Mask value for bit 1 */
+#define MASK_02   0x00000004    /* Mask value for bit 2 */
+#define MASK_03   0x00000008    /* Mask value for bit 3 */
+#define MASK_04   0x00000010    /* Mask value for bit 4 */
+#define MASK_05   0x00000020    /* Mask value for bit 5 */
+#define MASK_06   0x00000040    /* Mask value for bit 6 */
+#define MASK_07   0x00000080    /* Mask value for bit 7 */
+#define MASK_08   0x00000100    /* Mask value for bit 8 */
+#define MASK_09   0x00000200    /* Mask value for bit 9 */
+#define MASK_10   0x00000400    /* Mask value for bit 10 */
+#define MASK_11   0x00000800    /* Mask value for bit 11 */
+#define MASK_12   0x00001000    /* Mask value for bit 12 */
+#define MASK_13   0x00002000    /* Mask value for bit 13 */
+#define MASK_14   0x00004000    /* Mask value for bit 14 */
+#define MASK_15   0x00008000    /* Mask value for bit 15 */
+#define MASK_16   0x00010000    /* Mask value for bit 16 */
+#define MASK_17   0x00020000    /* Mask value for bit 17 */
+#define MASK_18   0x00040000    /* Mask value for bit 18 */
+#define MASK_19   0x00080000    /* Mask value for bit 19 */
+#define MASK_20   0x00100000    /* Mask value for bit 20 */
+#define MASK_21   0x00200000    /* Mask value for bit 21 */
+#define MASK_22   0x00400000    /* Mask value for bit 22 */
+#define MASK_23   0x00800000    /* Mask value for bit 23 */
+#define MASK_24   0x01000000    /* Mask value for bit 24 */
+#define MASK_25   0x02000000    /* Mask value for bit 25 */
+#define MASK_26   0x04000000    /* Mask value for bit 26 */
+#define MASK_27   0x08000000    /* Mask value for bit 27 */
+#define MASK_28   0x10000000    /* Mask value for bit 28 */
+#define MASK_29   0x20000000    /* Mask value for bit 29 */
+#define MASK_30   0x40000000    /* Mask value for bit 30 */
+#define MASK_31   0x80000000    /* Mask value for bit 31 */
+
+#define MASK_B0   0x000000ff    /* Mask value for byte 0 */
+#define MASK_B1   0x0000ff00    /* Mask value for byte 1 */
+#define MASK_B2   0x00ff0000    /* Mask value for byte 2 */
+#define MASK_B3   0xff000000    /* Mask value for byte 3 */
+
+#define MASK_W0   0x0000ffff    /* Mask value for word 0 */
+#define MASK_W1   0xffff0000    /* Mask value for word 1 */
+
+#define MASK_PA   0xfffffffc    /* Mask value for physical address */
+#define MASK_PR   0xfffffffe	/* Mask value for protection register */
+#define MASK_ER   0xffffffff    /* Mask value for the entire register */
+
+#define MASK_NONE 0x00000000    /* No mask */
+
+/* register aliases */
+#define BASE_ODD1         0x00  /* Video DMA 1 registers  */
+#define BASE_EVEN1        0x04
+#define PROT_ADDR1        0x08
+#define PITCH1            0x0C
+#define BASE_PAGE1        0x10  /* Video DMA 1 base page */
+#define NUM_LINE_BYTE1    0x14
+
+#define BASE_ODD2         0x18  /* Video DMA 2 registers */
+#define BASE_EVEN2        0x1C
+#define PROT_ADDR2        0x20
+#define PITCH2            0x24
+#define BASE_PAGE2        0x28  /* Video DMA 2 base page */
+#define NUM_LINE_BYTE2    0x2C
+
+#define BASE_ODD3         0x30  /* Video DMA 3 registers */
+#define BASE_EVEN3        0x34
+#define PROT_ADDR3        0x38
+#define PITCH3            0x3C
+#define BASE_PAGE3        0x40  /* Video DMA 3 base page */
+#define NUM_LINE_BYTE3    0x44
+
+#define PCI_BT_V1         0x48  /* Video/FIFO 1 */
+#define PCI_BT_V2         0x49  /* Video/FIFO 2 */
+#define PCI_BT_V3         0x4A  /* Video/FIFO 3 */
+#define PCI_BT_DEBI       0x4B  /* DEBI */
+#define PCI_BT_A          0x4C  /* Audio */
+
+#define DD1_INIT          0x50  /* Init setting of DD1 interface */
+
+#define DD1_STREAM_B      0x54  /* DD1 B video data stream handling */
+#define DD1_STREAM_A      0x56  /* DD1 A video data stream handling */
+
+#define BRS_CTRL          0x58  /* BRS control register */
+#define HPS_CTRL          0x5C  /* HPS control register */
+#define HPS_V_SCALE       0x60  /* HPS vertical scale */
+#define HPS_V_GAIN        0x64  /* HPS vertical ACL and gain */
+#define HPS_H_PRESCALE    0x68  /* HPS horizontal prescale   */
+#define HPS_H_SCALE       0x6C  /* HPS horizontal scale */
+#define BCS_CTRL          0x70  /* BCS control */
+#define CHROMA_KEY_RANGE  0x74
+#define CLIP_FORMAT_CTRL  0x78  /* HPS outputs formats & clipping */
+
+#define DEBI_CONFIG       0x7C
+#define DEBI_COMMAND      0x80
+#define DEBI_PAGE         0x84
+#define DEBI_AD           0x88
+
+#define I2C_TRANSFER      0x8C
+#define I2C_STATUS        0x90
+
+#define BASE_A1_IN        0x94	/* Audio 1 input DMA */
+#define PROT_A1_IN        0x98
+#define PAGE_A1_IN        0x9C
+
+#define BASE_A1_OUT       0xA0  /* Audio 1 output DMA */
+#define PROT_A1_OUT       0xA4
+#define PAGE_A1_OUT       0xA8
+
+#define BASE_A2_IN        0xAC  /* Audio 2 input DMA */
+#define PROT_A2_IN        0xB0
+#define PAGE_A2_IN        0xB4
+
+#define BASE_A2_OUT       0xB8  /* Audio 2 output DMA */
+#define PROT_A2_OUT       0xBC
+#define PAGE_A2_OUT       0xC0
+
+#define RPS_PAGE0         0xC4  /* RPS task 0 page register */
+#define RPS_PAGE1         0xC8  /* RPS task 1 page register */
+
+#define RPS_THRESH0       0xCC  /* HBI threshold for task 0 */
+#define RPS_THRESH1       0xD0  /* HBI threshold for task 1 */
+
+#define RPS_TOV0          0xD4  /* RPS timeout for task 0 */
+#define RPS_TOV1          0xD8  /* RPS timeout for task 1 */
+
+#define IER               0xDC  /* Interrupt enable register */
+
+#define GPIO_CTRL         0xE0  /* GPIO 0-3 register */
+
+#define EC1SSR            0xE4  /* Event cnt set 1 source select */
+#define EC2SSR            0xE8  /* Event cnt set 2 source select */
+#define ECT1R             0xEC  /* Event cnt set 1 thresholds */
+#define ECT2R             0xF0  /* Event cnt set 2 thresholds */
+
+#define ACON1             0xF4
+#define ACON2             0xF8
+
+#define MC1               0xFC   /* Main control register 1 */
+#define MC2               0x100  /* Main control register 2  */
+
+#define RPS_ADDR0         0x104  /* RPS task 0 address register */
+#define RPS_ADDR1         0x108  /* RPS task 1 address register */
+
+#define ISR               0x10C  /* Interrupt status register */
+#define PSR               0x110  /* Primary status register */
+#define SSR               0x114  /* Secondary status register */
+
+#define EC1R              0x118  /* Event counter set 1 register */
+#define EC2R              0x11C  /* Event counter set 2 register */
+
+#define PCI_VDP1          0x120  /* Video DMA pointer of FIFO 1 */
+#define PCI_VDP2          0x124  /* Video DMA pointer of FIFO 2 */
+#define PCI_VDP3          0x128  /* Video DMA pointer of FIFO 3 */
+#define PCI_ADP1          0x12C  /* Audio DMA pointer of audio out 1 */
+#define PCI_ADP2          0x130  /* Audio DMA pointer of audio in 1 */
+#define PCI_ADP3          0x134  /* Audio DMA pointer of audio out 2 */
+#define PCI_ADP4          0x138  /* Audio DMA pointer of audio in 2 */
+#define PCI_DMA_DDP       0x13C  /* DEBI DMA pointer */
+
+#define LEVEL_REP         0x140,
+#define A_TIME_SLOT1      0x180,  /* from 180 - 1BC */
+#define A_TIME_SLOT2      0x1C0,  /* from 1C0 - 1FC */
+
+/* isr masks */
+#define SPCI_PPEF       0x80000000  /* PCI parity error */
+#define SPCI_PABO       0x40000000  /* PCI access error (target or master abort) */
+#define SPCI_PPED       0x20000000  /* PCI parity error on 'real time data' */
+#define SPCI_RPS_I1     0x10000000  /* Interrupt issued by RPS1 */
+#define SPCI_RPS_I0     0x08000000  /* Interrupt issued by RPS0 */
+#define SPCI_RPS_LATE1  0x04000000  /* RPS task 1 is late */
+#define SPCI_RPS_LATE0  0x02000000  /* RPS task 0 is late */
+#define SPCI_RPS_E1     0x01000000  /* RPS error from task 1 */
+#define SPCI_RPS_E0     0x00800000  /* RPS error from task 0 */
+#define SPCI_RPS_TO1    0x00400000  /* RPS timeout task 1 */
+#define SPCI_RPS_TO0    0x00200000  /* RPS timeout task 0 */
+#define SPCI_UPLD       0x00100000  /* RPS in upload */
+#define SPCI_DEBI_S     0x00080000  /* DEBI status */
+#define SPCI_DEBI_E     0x00040000  /* DEBI error */
+#define SPCI_IIC_S      0x00020000  /* I2C status */
+#define SPCI_IIC_E      0x00010000  /* I2C error */
+#define SPCI_A2_IN      0x00008000  /* Audio 2 input DMA protection / limit */
+#define SPCI_A2_OUT     0x00004000  /* Audio 2 output DMA protection / limit */
+#define SPCI_A1_IN      0x00002000  /* Audio 1 input DMA protection / limit */
+#define SPCI_A1_OUT     0x00001000  /* Audio 1 output DMA protection / limit */
+#define SPCI_AFOU       0x00000800  /* Audio FIFO over- / underflow */
+#define SPCI_V_PE       0x00000400  /* Video protection address */
+#define SPCI_VFOU       0x00000200  /* Video FIFO over- / underflow */
+#define SPCI_FIDA       0x00000100  /* Field ID video port A */
+#define SPCI_FIDB       0x00000080  /* Field ID video port B */
+#define SPCI_PIN3       0x00000040  /* GPIO pin 3 */
+#define SPCI_PIN2       0x00000020  /* GPIO pin 2 */
+#define SPCI_PIN1       0x00000010  /* GPIO pin 1 */
+#define SPCI_PIN0       0x00000008  /* GPIO pin 0 */
+#define SPCI_ECS        0x00000004  /* Event counter 1, 2, 4, 5 */
+#define SPCI_EC3S       0x00000002  /* Event counter 3 */
+#define SPCI_EC0S       0x00000001  /* Event counter 0 */
+
+/* i2c */
+#define	SAA7146_I2C_ABORT	(1<<7)
+#define	SAA7146_I2C_SPERR	(1<<6)
+#define	SAA7146_I2C_APERR	(1<<5)
+#define	SAA7146_I2C_DTERR	(1<<4)
+#define	SAA7146_I2C_DRERR	(1<<3)
+#define	SAA7146_I2C_AL		(1<<2)
+#define	SAA7146_I2C_ERR		(1<<1)
+#define	SAA7146_I2C_BUSY	(1<<0)
+
+#define	SAA7146_I2C_START	(0x3)
+#define	SAA7146_I2C_CONT	(0x2)
+#define	SAA7146_I2C_STOP	(0x1)
+#define	SAA7146_I2C_NOP		(0x0)
+
+#define SAA7146_I2C_BUS_BIT_RATE_6400	(0x500)
+#define SAA7146_I2C_BUS_BIT_RATE_3200	(0x100)
+#define SAA7146_I2C_BUS_BIT_RATE_480	(0x400)
+#define SAA7146_I2C_BUS_BIT_RATE_320	(0x600)
+#define SAA7146_I2C_BUS_BIT_RATE_240	(0x700)
+#define SAA7146_I2C_BUS_BIT_RATE_120	(0x000)
+#define SAA7146_I2C_BUS_BIT_RATE_80	(0x200)
+#define SAA7146_I2C_BUS_BIT_RATE_60	(0x300)
+
+static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&x->int_slock, flags);
+	saa7146_write(x, IER, saa7146_read(x, IER) & ~y);
+	spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
+static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&x->int_slock, flags);
+	saa7146_write(x, IER, saa7146_read(x, IER) | y);
+	spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
+#endif
diff --git a/include/media/drv-intf/saa7146_vv.h b/include/media/drv-intf/saa7146_vv.h
new file mode 100644
index 000000000..6f80fb7f3
--- /dev/null
+++ b/include/media/drv-intf/saa7146_vv.h
@@ -0,0 +1,267 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SAA7146_VV__
+#define __SAA7146_VV__
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/drv-intf/saa7146.h>
+#include <media/videobuf-dma-sg.h>
+
+#define MAX_SAA7146_CAPTURE_BUFFERS	32	/* arbitrary */
+#define BUFFER_TIMEOUT     (HZ/2)  /* 0.5 seconds */
+
+#define WRITE_RPS0(x) do { \
+	dev->d_rps0.cpu_addr[ count++ ] = cpu_to_le32(x); \
+	} while (0);
+
+#define WRITE_RPS1(x) do { \
+	dev->d_rps1.cpu_addr[ count++ ] = cpu_to_le32(x); \
+	} while (0);
+
+struct	saa7146_video_dma {
+	u32 base_odd;
+	u32 base_even;
+	u32 prot_addr;
+	u32 pitch;
+	u32 base_page;
+	u32 num_line_byte;
+};
+
+#define FORMAT_BYTE_SWAP	0x1
+#define FORMAT_IS_PLANAR	0x2
+
+struct saa7146_format {
+	char	*name;
+	u32	pixelformat;
+	u32	trans;
+	u8	depth;
+	u8	flags;
+	u8	swap;
+};
+
+struct saa7146_standard
+{
+	char          *name;
+	v4l2_std_id   id;
+
+	int v_offset;	/* number of lines of vertical offset before processing */
+	int v_field;	/* number of lines in a field for HPS to process */
+
+	int h_offset;	/* horizontal offset of processing window */
+	int h_pixels;	/* number of horizontal pixels to process */
+
+	int v_max_out;
+	int h_max_out;
+};
+
+/* buffer for one video/vbi frame */
+struct saa7146_buf {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer vb;
+
+	/* saa7146 specific */
+	struct v4l2_pix_format  *fmt;
+	int (*activate)(struct saa7146_dev *dev,
+			struct saa7146_buf *buf,
+			struct saa7146_buf *next);
+
+	/* page tables */
+	struct saa7146_pgtable  pt[3];
+};
+
+struct saa7146_dmaqueue {
+	struct saa7146_dev	*dev;
+	struct saa7146_buf	*curr;
+	struct list_head	queue;
+	struct timer_list	timeout;
+};
+
+struct saa7146_overlay {
+	struct saa7146_fh	*fh;
+	struct v4l2_window	win;
+	struct v4l2_clip	clips[16];
+	int			nclips;
+};
+
+/* per open data */
+struct saa7146_fh {
+	/* Must be the first field! */
+	struct v4l2_fh		fh;
+	struct saa7146_dev	*dev;
+
+	/* video capture */
+	struct videobuf_queue	video_q;
+
+	/* vbi capture */
+	struct videobuf_queue	vbi_q;
+
+	unsigned int resources;	/* resource management for device open */
+};
+
+#define STATUS_OVERLAY	0x01
+#define STATUS_CAPTURE	0x02
+
+struct saa7146_vv
+{
+	/* vbi capture */
+	struct saa7146_dmaqueue		vbi_dmaq;
+	struct v4l2_vbi_format		vbi_fmt;
+	struct timer_list		vbi_read_timeout;
+	struct file			*vbi_read_timeout_file;
+	/* vbi workaround interrupt queue */
+	wait_queue_head_t		vbi_wq;
+	int				vbi_fieldcount;
+	struct saa7146_fh		*vbi_streaming;
+
+	int				video_status;
+	struct saa7146_fh		*video_fh;
+
+	/* video overlay */
+	struct saa7146_overlay		ov;
+	struct v4l2_framebuffer		ov_fb;
+	struct saa7146_format		*ov_fmt;
+	struct saa7146_fh		*ov_suspend;
+
+	/* video capture */
+	struct saa7146_dmaqueue		video_dmaq;
+	struct v4l2_pix_format		video_fmt;
+	enum v4l2_field			last_field;
+
+	/* common: fixme? shouldn't this be in saa7146_fh?
+	   (this leads to a more complicated question: shall the driver
+	   store the different settings (for example S_INPUT) for every open
+	   and restore it appropriately, or should all settings be common for
+	   all opens? currently, we do the latter, like all other
+	   drivers do... */
+	struct saa7146_standard	*standard;
+
+	int	vflip;
+	int	hflip;
+	int	current_hps_source;
+	int	current_hps_sync;
+
+	struct saa7146_dma	d_clipping;	/* pointer to clipping memory */
+
+	unsigned int resources;	/* resource management for device */
+};
+
+/* flags */
+#define SAA7146_USE_PORT_B_FOR_VBI	0x2     /* use input port b for vbi hardware bug workaround */
+
+struct saa7146_ext_vv
+{
+	/* informations about the video capabilities of the device */
+	int	inputs;
+	int	audios;
+	u32	capabilities;
+	int	flags;
+
+	/* additionally supported transmission standards */
+	struct saa7146_standard *stds;
+	int num_stds;
+	int (*std_callback)(struct saa7146_dev*, struct saa7146_standard *);
+
+	/* the extension can override this */
+	struct v4l2_ioctl_ops vid_ops;
+	struct v4l2_ioctl_ops vbi_ops;
+	/* pointer to the saa7146 core ops */
+	const struct v4l2_ioctl_ops *core_ops;
+
+	struct v4l2_file_operations vbi_fops;
+};
+
+struct saa7146_use_ops  {
+	void (*init)(struct saa7146_dev *, struct saa7146_vv *);
+	int(*open)(struct saa7146_dev *, struct file *);
+	void (*release)(struct saa7146_dev *, struct file *);
+	void (*irq_done)(struct saa7146_dev *, unsigned long status);
+	ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
+};
+
+/* from saa7146_fops.c */
+int saa7146_register_device(struct video_device *vid, struct saa7146_dev *dev, char *name, int type);
+int saa7146_unregister_device(struct video_device *vid, struct saa7146_dev *dev);
+void saa7146_buffer_finish(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, int state);
+void saa7146_buffer_next(struct saa7146_dev *dev, struct saa7146_dmaqueue *q,int vbi);
+int saa7146_buffer_queue(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, struct saa7146_buf *buf);
+void saa7146_buffer_timeout(struct timer_list *t);
+void saa7146_dma_free(struct saa7146_dev* dev,struct videobuf_queue *q,
+						struct saa7146_buf *buf);
+
+int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv);
+int saa7146_vv_release(struct saa7146_dev* dev);
+
+/* from saa7146_hlp.c */
+int saa7146_enable_overlay(struct saa7146_fh *fh);
+void saa7146_disable_overlay(struct saa7146_fh *fh);
+
+void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next);
+void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) ;
+void saa7146_set_hps_source_and_sync(struct saa7146_dev *saa, int source, int sync);
+void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data);
+
+/* from saa7146_video.c */
+extern const struct v4l2_ioctl_ops saa7146_video_ioctl_ops;
+extern const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops;
+extern const struct saa7146_use_ops saa7146_video_uops;
+int saa7146_start_preview(struct saa7146_fh *fh);
+int saa7146_stop_preview(struct saa7146_fh *fh);
+long saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg);
+int saa7146_s_ctrl(struct v4l2_ctrl *ctrl);
+
+/* from saa7146_vbi.c */
+extern const struct saa7146_use_ops saa7146_vbi_uops;
+
+/* resource management functions */
+int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit);
+void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits);
+
+#define RESOURCE_DMA1_HPS	0x1
+#define RESOURCE_DMA2_CLP	0x2
+#define RESOURCE_DMA3_BRS	0x4
+
+/* saa7146 source inputs */
+#define SAA7146_HPS_SOURCE_PORT_A	0x00
+#define SAA7146_HPS_SOURCE_PORT_B	0x01
+#define SAA7146_HPS_SOURCE_YPB_CPA	0x02
+#define SAA7146_HPS_SOURCE_YPA_CPB	0x03
+
+/* sync inputs */
+#define SAA7146_HPS_SYNC_PORT_A		0x00
+#define SAA7146_HPS_SYNC_PORT_B		0x01
+
+/* some memory sizes */
+/* max. 16 clipping rectangles */
+#define SAA7146_CLIPPING_MEM	(16 * 4 * sizeof(u32))
+
+/* some defines for the various clipping-modes */
+#define SAA7146_CLIPPING_RECT		0x4
+#define SAA7146_CLIPPING_RECT_INVERTED	0x5
+#define SAA7146_CLIPPING_MASK		0x6
+#define SAA7146_CLIPPING_MASK_INVERTED	0x7
+
+/* output formats: each entry holds four informations */
+#define RGB08_COMPOSED	0x0217 /* composed is used in the sense of "not-planar" */
+/* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1), format-mode = 7 */
+#define RGB15_COMPOSED	0x0213
+#define RGB16_COMPOSED	0x0210
+#define RGB24_COMPOSED	0x0201
+#define RGB32_COMPOSED	0x0202
+
+#define Y8			0x0006
+#define YUV411_COMPOSED		0x0003
+#define YUV422_COMPOSED		0x0000
+/* this means: planar?=1, yuv2rgb-conversion-mode=0, dither=no(=0), format-mode = b */
+#define YUV411_DECOMPOSED	0x100b
+#define YUV422_DECOMPOSED	0x1009
+#define YUV420_DECOMPOSED	0x100a
+
+#define IS_PLANAR(x) (x & 0xf000)
+
+/* misc defines */
+#define SAA7146_NO_SWAP		(0x0)
+#define SAA7146_TWO_BYTE_SWAP	(0x1)
+#define SAA7146_FOUR_BYTE_SWAP	(0x2)
+
+#endif
diff --git a/include/media/drv-intf/sh_mobile_ceu.h b/include/media/drv-intf/sh_mobile_ceu.h
new file mode 100644
index 000000000..555f0ecc0
--- /dev/null
+++ b/include/media/drv-intf/sh_mobile_ceu.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_MOBILE_CEU_H__
+#define __ASM_SH_MOBILE_CEU_H__
+
+#define SH_CEU_FLAG_USE_8BIT_BUS	(1 << 0) /* use  8bit bus width */
+#define SH_CEU_FLAG_USE_16BIT_BUS	(1 << 1) /* use 16bit bus width */
+#define SH_CEU_FLAG_HSYNC_LOW		(1 << 2) /* default High if possible */
+#define SH_CEU_FLAG_VSYNC_LOW		(1 << 3) /* default High if possible */
+#define SH_CEU_FLAG_LOWER_8BIT		(1 << 4) /* default upper 8bit */
+
+struct device;
+struct resource;
+
+struct sh_mobile_ceu_companion {
+	u32		num_resources;
+	struct resource	*resource;
+	int		id;
+	void		*platform_data;
+};
+
+struct sh_mobile_ceu_info {
+	unsigned long flags;
+	int max_width;
+	int max_height;
+	struct v4l2_async_subdev **asd;	/* Flat array, arranged in groups */
+	unsigned int *asd_sizes;	/* 0-terminated array pf asd group sizes */
+};
+
+#endif /* __ASM_SH_MOBILE_CEU_H__ */
diff --git a/include/media/drv-intf/sh_vou.h b/include/media/drv-intf/sh_vou.h
new file mode 100644
index 000000000..ec3ba9a59
--- /dev/null
+++ b/include/media/drv-intf/sh_vou.h
@@ -0,0 +1,33 @@
+/*
+ * SuperH Video Output Unit (VOU) driver header
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef SH_VOU_H
+#define SH_VOU_H
+
+#include <linux/i2c.h>
+
+/* Bus flags */
+#define SH_VOU_PCLK_FALLING	(1 << 0)
+#define SH_VOU_HSYNC_LOW	(1 << 1)
+#define SH_VOU_VSYNC_LOW	(1 << 2)
+
+enum sh_vou_bus_fmt {
+	SH_VOU_BUS_8BIT,
+	SH_VOU_BUS_16BIT,
+	SH_VOU_BUS_BT656,
+};
+
+struct sh_vou_pdata {
+	enum sh_vou_bus_fmt bus_fmt;
+	int i2c_adap;
+	struct i2c_board_info *board_info;
+	unsigned long flags;
+};
+
+#endif
diff --git a/include/media/drv-intf/si476x.h b/include/media/drv-intf/si476x.h
new file mode 100644
index 000000000..ad87fa848
--- /dev/null
+++ b/include/media/drv-intf/si476x.h
@@ -0,0 +1,37 @@
+/*
+ * include/media/drv-intf/si476x.h -- Common definitions for si476x driver
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef SI476X_H
+#define SI476X_H
+
+#include <linux/types.h>
+#include <linux/videodev2.h>
+
+#include <linux/mfd/si476x-reports.h>
+
+enum si476x_ctrl_id {
+	V4L2_CID_SI476X_RSSI_THRESHOLD	= (V4L2_CID_USER_SI476X_BASE + 1),
+	V4L2_CID_SI476X_SNR_THRESHOLD	= (V4L2_CID_USER_SI476X_BASE + 2),
+	V4L2_CID_SI476X_MAX_TUNE_ERROR	= (V4L2_CID_USER_SI476X_BASE + 3),
+	V4L2_CID_SI476X_HARMONICS_COUNT	= (V4L2_CID_USER_SI476X_BASE + 4),
+	V4L2_CID_SI476X_DIVERSITY_MODE	= (V4L2_CID_USER_SI476X_BASE + 5),
+	V4L2_CID_SI476X_INTERCHIP_LINK	= (V4L2_CID_USER_SI476X_BASE + 6),
+};
+
+#endif /* SI476X_H*/
diff --git a/include/media/drv-intf/soc_mediabus.h b/include/media/drv-intf/soc_mediabus.h
new file mode 100644
index 000000000..2ff773785
--- /dev/null
+++ b/include/media/drv-intf/soc_mediabus.h
@@ -0,0 +1,112 @@
+/*
+ * SoC-camera Media Bus API extensions
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SOC_MEDIABUS_H
+#define SOC_MEDIABUS_H
+
+#include <linux/videodev2.h>
+#include <linux/v4l2-mediabus.h>
+
+/**
+ * enum soc_mbus_packing - data packing types on the media-bus
+ * @SOC_MBUS_PACKING_NONE:	no packing, bit-for-bit transfer to RAM, one
+ *				sample represents one pixel
+ * @SOC_MBUS_PACKING_2X8_PADHI:	16 bits transferred in 2 8-bit samples, in the
+ *				possibly incomplete byte high bits are padding
+ * @SOC_MBUS_PACKING_2X8_PADLO:	as above, but low bits are padding
+ * @SOC_MBUS_PACKING_EXTEND16:	sample width (e.g., 10 bits) has to be extended
+ *				to 16 bits
+ * @SOC_MBUS_PACKING_VARIABLE:	compressed formats with variable packing
+ * @SOC_MBUS_PACKING_1_5X8:	used for packed YUV 4:2:0 formats, where 4
+ *				pixels occupy 6 bytes in RAM
+ * @SOC_MBUS_PACKING_EXTEND32:	sample width (e.g., 24 bits) has to be extended
+ *				to 32 bits
+ */
+enum soc_mbus_packing {
+	SOC_MBUS_PACKING_NONE,
+	SOC_MBUS_PACKING_2X8_PADHI,
+	SOC_MBUS_PACKING_2X8_PADLO,
+	SOC_MBUS_PACKING_EXTEND16,
+	SOC_MBUS_PACKING_VARIABLE,
+	SOC_MBUS_PACKING_1_5X8,
+	SOC_MBUS_PACKING_EXTEND32,
+};
+
+/**
+ * enum soc_mbus_order - sample order on the media bus
+ * @SOC_MBUS_ORDER_LE:		least significant sample first
+ * @SOC_MBUS_ORDER_BE:		most significant sample first
+ */
+enum soc_mbus_order {
+	SOC_MBUS_ORDER_LE,
+	SOC_MBUS_ORDER_BE,
+};
+
+/**
+ * enum soc_mbus_layout - planes layout in memory
+ * @SOC_MBUS_LAYOUT_PACKED:		color components packed
+ * @SOC_MBUS_LAYOUT_PLANAR_2Y_U_V:	YUV components stored in 3 planes (4:2:2)
+ * @SOC_MBUS_LAYOUT_PLANAR_2Y_C:	YUV components stored in a luma and a
+ *					chroma plane (C plane is half the size
+ *					of Y plane)
+ * @SOC_MBUS_LAYOUT_PLANAR_Y_C:		YUV components stored in a luma and a
+ *					chroma plane (C plane is the same size
+ *					as Y plane)
+ */
+enum soc_mbus_layout {
+	SOC_MBUS_LAYOUT_PACKED = 0,
+	SOC_MBUS_LAYOUT_PLANAR_2Y_U_V,
+	SOC_MBUS_LAYOUT_PLANAR_2Y_C,
+	SOC_MBUS_LAYOUT_PLANAR_Y_C,
+};
+
+/**
+ * struct soc_mbus_pixelfmt - Data format on the media bus
+ * @name:		Name of the format
+ * @fourcc:		Fourcc code, that will be obtained if the data is
+ *			stored in memory in the following way:
+ * @packing:		Type of sample-packing, that has to be used
+ * @order:		Sample order when storing in memory
+ * @bits_per_sample:	How many bits the bridge has to sample
+ */
+struct soc_mbus_pixelfmt {
+	const char		*name;
+	u32			fourcc;
+	enum soc_mbus_packing	packing;
+	enum soc_mbus_order	order;
+	enum soc_mbus_layout	layout;
+	u8			bits_per_sample;
+};
+
+/**
+ * struct soc_mbus_lookup - Lookup FOURCC IDs by mediabus codes for pass-through
+ * @code:	mediabus pixel-code
+ * @fmt:	pixel format description
+ */
+struct soc_mbus_lookup {
+	u32	code;
+	struct soc_mbus_pixelfmt	fmt;
+};
+
+const struct soc_mbus_pixelfmt *soc_mbus_find_fmtdesc(
+	u32 code,
+	const struct soc_mbus_lookup *lookup,
+	int n);
+const struct soc_mbus_pixelfmt *soc_mbus_get_fmtdesc(
+	u32 code);
+s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf);
+s32 soc_mbus_image_size(const struct soc_mbus_pixelfmt *mf,
+			u32 bytes_per_line, u32 height);
+int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf,
+			unsigned int *numerator, unsigned int *denominator);
+unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
+					unsigned int flags);
+
+#endif
diff --git a/include/media/drv-intf/tea575x.h b/include/media/drv-intf/tea575x.h
new file mode 100644
index 000000000..ba4923844
--- /dev/null
+++ b/include/media/drv-intf/tea575x.h
@@ -0,0 +1,80 @@
+#ifndef __SOUND_TEA575X_TUNER_H
+#define __SOUND_TEA575X_TUNER_H
+
+/*
+ *   ALSA driver for TEA5757/5759 Philips AM/FM tuner chips
+ *
+ *	Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ */
+
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+
+#define TEA575X_FMIF	10700
+#define TEA575X_AMIF	  450
+
+#define TEA575X_DATA	(1 << 0)
+#define TEA575X_CLK	(1 << 1)
+#define TEA575X_WREN	(1 << 2)
+#define TEA575X_MOST	(1 << 3)
+
+struct snd_tea575x;
+
+struct snd_tea575x_ops {
+	/* Drivers using snd_tea575x must either define read_ and write_val */
+	void (*write_val)(struct snd_tea575x *tea, u32 val);
+	u32 (*read_val)(struct snd_tea575x *tea);
+	/* Or define the 3 pin functions */
+	void (*set_pins)(struct snd_tea575x *tea, u8 pins);
+	u8 (*get_pins)(struct snd_tea575x *tea);
+	void (*set_direction)(struct snd_tea575x *tea, bool output);
+};
+
+struct snd_tea575x {
+	struct v4l2_device *v4l2_dev;
+	struct v4l2_file_operations fops;
+	struct video_device vd;		/* video device */
+	int radio_nr;			/* radio_nr */
+	bool tea5759;			/* 5759 chip is present */
+	bool has_am;			/* Device can tune to AM freqs */
+	bool cannot_read_data;		/* Device cannot read the data pin */
+	bool cannot_mute;		/* Device cannot mute */
+	bool mute;			/* Device is muted? */
+	bool stereo;			/* receiving stereo */
+	bool tuned;			/* tuned to a station */
+	unsigned int val;		/* hw value */
+	u32 band;			/* 0: FM, 1: FM-Japan, 2: AM */
+	u32 freq;			/* frequency */
+	struct mutex mutex;
+	const struct snd_tea575x_ops *ops;
+	void *private_data;
+	u8 card[32];
+	u8 bus_info[32];
+	struct v4l2_ctrl_handler ctrl_handler;
+	int (*ext_init)(struct snd_tea575x *tea);
+};
+
+int snd_tea575x_enum_freq_bands(struct snd_tea575x *tea,
+					struct v4l2_frequency_band *band);
+int snd_tea575x_g_tuner(struct snd_tea575x *tea, struct v4l2_tuner *v);
+int snd_tea575x_s_hw_freq_seek(struct file *file, struct snd_tea575x *tea,
+				const struct v4l2_hw_freq_seek *a);
+int snd_tea575x_hw_init(struct snd_tea575x *tea);
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner);
+void snd_tea575x_exit(struct snd_tea575x *tea);
+void snd_tea575x_set_freq(struct snd_tea575x *tea);
+
+#endif /* __SOUND_TEA575X_TUNER_H */