Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 180 insertions, 0 deletions

diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
new file mode 100644
index 000000000..4bbb5f3d2
--- /dev/null
+++ b/include/media/v4l2-mediabus.h
@@ -0,0 +1,180 @@
+/*
+ * Media Bus API header
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef V4L2_MEDIABUS_H
+#define V4L2_MEDIABUS_H
+
+#include <linux/v4l2-mediabus.h>
+#include <linux/bitops.h>
+
+
+/* Parallel flags */
+/*
+ * Can the client run in master or in slave mode. By "Master mode" an operation
+ * mode is meant, when the client (e.g., a camera sensor) is producing
+ * horizontal and vertical synchronisation. In "Slave mode" the host is
+ * providing these signals to the slave.
+ */
+#define V4L2_MBUS_MASTER			BIT(0)
+#define V4L2_MBUS_SLAVE				BIT(1)
+/*
+ * Signal polarity flags
+ * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused
+ * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
+ * configuration of hardware that uses [HV]REF signals
+ */
+#define V4L2_MBUS_HSYNC_ACTIVE_HIGH		BIT(2)
+#define V4L2_MBUS_HSYNC_ACTIVE_LOW		BIT(3)
+#define V4L2_MBUS_VSYNC_ACTIVE_HIGH		BIT(4)
+#define V4L2_MBUS_VSYNC_ACTIVE_LOW		BIT(5)
+#define V4L2_MBUS_PCLK_SAMPLE_RISING		BIT(6)
+#define V4L2_MBUS_PCLK_SAMPLE_FALLING		BIT(7)
+#define V4L2_MBUS_DATA_ACTIVE_HIGH		BIT(8)
+#define V4L2_MBUS_DATA_ACTIVE_LOW		BIT(9)
+/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
+#define V4L2_MBUS_FIELD_EVEN_HIGH		BIT(10)
+/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
+#define V4L2_MBUS_FIELD_EVEN_LOW		BIT(11)
+/* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */
+#define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH		BIT(12)
+#define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW		BIT(13)
+#define V4L2_MBUS_DATA_ENABLE_HIGH		BIT(14)
+#define V4L2_MBUS_DATA_ENABLE_LOW		BIT(15)
+
+/* Serial flags */
+/* How many lanes the client can use */
+#define V4L2_MBUS_CSI2_1_LANE			BIT(0)
+#define V4L2_MBUS_CSI2_2_LANE			BIT(1)
+#define V4L2_MBUS_CSI2_3_LANE			BIT(2)
+#define V4L2_MBUS_CSI2_4_LANE			BIT(3)
+/* On which channels it can send video data */
+#define V4L2_MBUS_CSI2_CHANNEL_0		BIT(4)
+#define V4L2_MBUS_CSI2_CHANNEL_1		BIT(5)
+#define V4L2_MBUS_CSI2_CHANNEL_2		BIT(6)
+#define V4L2_MBUS_CSI2_CHANNEL_3		BIT(7)
+/* Does it support only continuous or also non-continuous clock mode */
+#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK		BIT(8)
+#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	BIT(9)
+
+#define V4L2_MBUS_CSI2_LANES		(V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \
+					 V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE)
+#define V4L2_MBUS_CSI2_CHANNELS		(V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \
+					 V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3)
+
+/**
+ * enum v4l2_mbus_type - media bus type
+ * @V4L2_MBUS_PARALLEL:	parallel interface with hsync and vsync
+ * @V4L2_MBUS_BT656:	parallel interface with embedded synchronisation, can
+ *			also be used for BT.1120
+ * @V4L2_MBUS_CSI1:	MIPI CSI-1 serial interface
+ * @V4L2_MBUS_CCP2:	CCP2 (Compact Camera Port 2)
+ * @V4L2_MBUS_CSI2:	MIPI CSI-2 serial interface
+ */
+enum v4l2_mbus_type {
+	V4L2_MBUS_PARALLEL,
+	V4L2_MBUS_BT656,
+	V4L2_MBUS_CSI1,
+	V4L2_MBUS_CCP2,
+	V4L2_MBUS_CSI2,
+};
+
+/**
+ * struct v4l2_mbus_config - media bus configuration
+ * @type:	in: interface type
+ * @flags:	in / out: configuration flags, depending on @type
+ */
+struct v4l2_mbus_config {
+	enum v4l2_mbus_type type;
+	unsigned int flags;
+};
+
+/**
+ * v4l2_fill_pix_format - Ancillary routine that fills a &struct
+ *	v4l2_pix_format fields from a &struct v4l2_mbus_framefmt.
+ *
+ * @pix_fmt:	pointer to &struct v4l2_pix_format to be filled
+ * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be used as model
+ */
+static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
+				const struct v4l2_mbus_framefmt *mbus_fmt)
+{
+	pix_fmt->width = mbus_fmt->width;
+	pix_fmt->height = mbus_fmt->height;
+	pix_fmt->field = mbus_fmt->field;
+	pix_fmt->colorspace = mbus_fmt->colorspace;
+	pix_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
+	pix_fmt->quantization = mbus_fmt->quantization;
+	pix_fmt->xfer_func = mbus_fmt->xfer_func;
+}
+
+/**
+ * v4l2_fill_pix_format - Ancillary routine that fills a &struct
+ *	v4l2_mbus_framefmt from a &struct v4l2_pix_format and a
+ *	data format code.
+ *
+ * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be filled
+ * @pix_fmt:	pointer to &struct v4l2_pix_format to be used as model
+ * @code:	data format code (from &enum v4l2_mbus_pixelcode)
+ */
+static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
+			   const struct v4l2_pix_format *pix_fmt,
+			   u32 code)
+{
+	mbus_fmt->width = pix_fmt->width;
+	mbus_fmt->height = pix_fmt->height;
+	mbus_fmt->field = pix_fmt->field;
+	mbus_fmt->colorspace = pix_fmt->colorspace;
+	mbus_fmt->ycbcr_enc = pix_fmt->ycbcr_enc;
+	mbus_fmt->quantization = pix_fmt->quantization;
+	mbus_fmt->xfer_func = pix_fmt->xfer_func;
+	mbus_fmt->code = code;
+}
+
+/**
+ * v4l2_fill_pix_format - Ancillary routine that fills a &struct
+ *	v4l2_pix_format_mplane fields from a media bus structure.
+ *
+ * @pix_mp_fmt:	pointer to &struct v4l2_pix_format_mplane to be filled
+ * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be used as model
+ */
+static inline void v4l2_fill_pix_format_mplane(
+				struct v4l2_pix_format_mplane *pix_mp_fmt,
+				const struct v4l2_mbus_framefmt *mbus_fmt)
+{
+	pix_mp_fmt->width = mbus_fmt->width;
+	pix_mp_fmt->height = mbus_fmt->height;
+	pix_mp_fmt->field = mbus_fmt->field;
+	pix_mp_fmt->colorspace = mbus_fmt->colorspace;
+	pix_mp_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
+	pix_mp_fmt->quantization = mbus_fmt->quantization;
+	pix_mp_fmt->xfer_func = mbus_fmt->xfer_func;
+}
+
+/**
+ * v4l2_fill_pix_format - Ancillary routine that fills a &struct
+ *	v4l2_mbus_framefmt from a &struct v4l2_pix_format_mplane.
+ *
+ * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be filled
+ * @pix_mp_fmt:	pointer to &struct v4l2_pix_format_mplane to be used as model
+ */
+static inline void v4l2_fill_mbus_format_mplane(
+				struct v4l2_mbus_framefmt *mbus_fmt,
+				const struct v4l2_pix_format_mplane *pix_mp_fmt)
+{
+	mbus_fmt->width = pix_mp_fmt->width;
+	mbus_fmt->height = pix_mp_fmt->height;
+	mbus_fmt->field = pix_mp_fmt->field;
+	mbus_fmt->colorspace = pix_mp_fmt->colorspace;
+	mbus_fmt->ycbcr_enc = pix_mp_fmt->ycbcr_enc;
+	mbus_fmt->quantization = pix_mp_fmt->quantization;
+	mbus_fmt->xfer_func = pix_mp_fmt->xfer_func;
+}
+
+#endif