Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 3367 insertions, 0 deletions

diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig
new file mode 100644
index 000000000..02f50b7a9
--- /dev/null
+++ b/sound/soc/bcm/Kconfig
@@ -0,0 +1,18 @@
+config SND_BCM2835_SOC_I2S
+	tristate "SoC Audio support for the Broadcom BCM2835 I2S module"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select REGMAP_MMIO
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the BCM2835 I2S interface. You will also need
+	  to select the audio interfaces to support below.
+
+config SND_SOC_CYGNUS
+	tristate "SoC platform audio for Broadcom Cygnus chips"
+	depends on ARCH_BCM_CYGNUS || COMPILE_TEST
+	help
+	  Say Y if you want to add support for ASoC audio on Broadcom
+	  Cygnus chips (bcm958300, bcm958305, bcm911360)
+
+	  If you don't know what to do here, say N.
diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile
new file mode 100644
index 000000000..fc739d007
--- /dev/null
+++ b/sound/soc/bcm/Makefile
@@ -0,0 +1,10 @@
+# BCM2835 Platform Support
+snd-soc-bcm2835-i2s-objs := bcm2835-i2s.o
+
+obj-$(CONFIG_SND_BCM2835_SOC_I2S) += snd-soc-bcm2835-i2s.o
+
+# CYGNUS Platform Support
+snd-soc-cygnus-objs := cygnus-pcm.o cygnus-ssp.o
+
+obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o
+
diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c
new file mode 100644
index 000000000..d5f73a8ab
--- /dev/null
+++ b/sound/soc/bcm/bcm2835-i2s.c
@@ -0,0 +1,942 @@
+/*
+ * ALSA SoC I2S Audio Layer for Broadcom BCM2835 SoC
+ *
+ * Author:	Florian Meier <florian.meier@koalo.de>
+ *		Copyright 2013
+ *
+ * Based on
+ *	Raspberry Pi PCM I2S ALSA Driver
+ *	Copyright (c) by Phil Poole 2013
+ *
+ *	ALSA SoC I2S (McBSP) Audio Layer for TI DAVINCI processor
+ *      Vladimir Barinov, <vbarinov@embeddedalley.com>
+ *	Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ *
+ *	OMAP ALSA SoC DAI driver using McBSP port
+ *	Copyright (C) 2008 Nokia Corporation
+ *	Contact: Jarkko Nikula <jarkko.nikula@bitmer.com>
+ *		 Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ *	Freescale SSI ALSA SoC Digital Audio Interface (DAI) driver
+ *	Author: Timur Tabi <timur@freescale.com>
+ *	Copyright 2007-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include <sound/core.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+/* I2S registers */
+#define BCM2835_I2S_CS_A_REG		0x00
+#define BCM2835_I2S_FIFO_A_REG		0x04
+#define BCM2835_I2S_MODE_A_REG		0x08
+#define BCM2835_I2S_RXC_A_REG		0x0c
+#define BCM2835_I2S_TXC_A_REG		0x10
+#define BCM2835_I2S_DREQ_A_REG		0x14
+#define BCM2835_I2S_INTEN_A_REG	0x18
+#define BCM2835_I2S_INTSTC_A_REG	0x1c
+#define BCM2835_I2S_GRAY_REG		0x20
+
+/* I2S register settings */
+#define BCM2835_I2S_STBY		BIT(25)
+#define BCM2835_I2S_SYNC		BIT(24)
+#define BCM2835_I2S_RXSEX		BIT(23)
+#define BCM2835_I2S_RXF		BIT(22)
+#define BCM2835_I2S_TXE		BIT(21)
+#define BCM2835_I2S_RXD		BIT(20)
+#define BCM2835_I2S_TXD		BIT(19)
+#define BCM2835_I2S_RXR		BIT(18)
+#define BCM2835_I2S_TXW		BIT(17)
+#define BCM2835_I2S_CS_RXERR		BIT(16)
+#define BCM2835_I2S_CS_TXERR		BIT(15)
+#define BCM2835_I2S_RXSYNC		BIT(14)
+#define BCM2835_I2S_TXSYNC		BIT(13)
+#define BCM2835_I2S_DMAEN		BIT(9)
+#define BCM2835_I2S_RXTHR(v)		((v) << 7)
+#define BCM2835_I2S_TXTHR(v)		((v) << 5)
+#define BCM2835_I2S_RXCLR		BIT(4)
+#define BCM2835_I2S_TXCLR		BIT(3)
+#define BCM2835_I2S_TXON		BIT(2)
+#define BCM2835_I2S_RXON		BIT(1)
+#define BCM2835_I2S_EN			(1)
+
+#define BCM2835_I2S_CLKDIS		BIT(28)
+#define BCM2835_I2S_PDMN		BIT(27)
+#define BCM2835_I2S_PDME		BIT(26)
+#define BCM2835_I2S_FRXP		BIT(25)
+#define BCM2835_I2S_FTXP		BIT(24)
+#define BCM2835_I2S_CLKM		BIT(23)
+#define BCM2835_I2S_CLKI		BIT(22)
+#define BCM2835_I2S_FSM		BIT(21)
+#define BCM2835_I2S_FSI		BIT(20)
+#define BCM2835_I2S_FLEN(v)		((v) << 10)
+#define BCM2835_I2S_FSLEN(v)		(v)
+
+#define BCM2835_I2S_CHWEX		BIT(15)
+#define BCM2835_I2S_CHEN		BIT(14)
+#define BCM2835_I2S_CHPOS(v)		((v) << 4)
+#define BCM2835_I2S_CHWID(v)		(v)
+#define BCM2835_I2S_CH1(v)		((v) << 16)
+#define BCM2835_I2S_CH2(v)		(v)
+#define BCM2835_I2S_CH1_POS(v)		BCM2835_I2S_CH1(BCM2835_I2S_CHPOS(v))
+#define BCM2835_I2S_CH2_POS(v)		BCM2835_I2S_CH2(BCM2835_I2S_CHPOS(v))
+
+#define BCM2835_I2S_TX_PANIC(v)	((v) << 24)
+#define BCM2835_I2S_RX_PANIC(v)	((v) << 16)
+#define BCM2835_I2S_TX(v)		((v) << 8)
+#define BCM2835_I2S_RX(v)		(v)
+
+#define BCM2835_I2S_INT_RXERR		BIT(3)
+#define BCM2835_I2S_INT_TXERR		BIT(2)
+#define BCM2835_I2S_INT_RXR		BIT(1)
+#define BCM2835_I2S_INT_TXW		BIT(0)
+
+/* Frame length register is 10 bit, maximum length 1024 */
+#define BCM2835_I2S_MAX_FRAME_LENGTH	1024
+
+/* General device struct */
+struct bcm2835_i2s_dev {
+	struct device				*dev;
+	struct snd_dmaengine_dai_dma_data	dma_data[2];
+	unsigned int				fmt;
+	unsigned int				tdm_slots;
+	unsigned int				rx_mask;
+	unsigned int				tx_mask;
+	unsigned int				slot_width;
+	unsigned int				frame_length;
+
+	struct regmap				*i2s_regmap;
+	struct clk				*clk;
+	bool					clk_prepared;
+	int					clk_rate;
+};
+
+static void bcm2835_i2s_start_clock(struct bcm2835_i2s_dev *dev)
+{
+	unsigned int master = dev->fmt & SND_SOC_DAIFMT_MASTER_MASK;
+
+	if (dev->clk_prepared)
+		return;
+
+	switch (master) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+	case SND_SOC_DAIFMT_CBS_CFM:
+		clk_prepare_enable(dev->clk);
+		dev->clk_prepared = true;
+		break;
+	default:
+		break;
+	}
+}
+
+static void bcm2835_i2s_stop_clock(struct bcm2835_i2s_dev *dev)
+{
+	if (dev->clk_prepared)
+		clk_disable_unprepare(dev->clk);
+	dev->clk_prepared = false;
+}
+
+static void bcm2835_i2s_clear_fifos(struct bcm2835_i2s_dev *dev,
+				    bool tx, bool rx)
+{
+	int timeout = 1000;
+	uint32_t syncval;
+	uint32_t csreg;
+	uint32_t i2s_active_state;
+	bool clk_was_prepared;
+	uint32_t off;
+	uint32_t clr;
+
+	off =  tx ? BCM2835_I2S_TXON : 0;
+	off |= rx ? BCM2835_I2S_RXON : 0;
+
+	clr =  tx ? BCM2835_I2S_TXCLR : 0;
+	clr |= rx ? BCM2835_I2S_RXCLR : 0;
+
+	/* Backup the current state */
+	regmap_read(dev->i2s_regmap, BCM2835_I2S_CS_A_REG, &csreg);
+	i2s_active_state = csreg & (BCM2835_I2S_RXON | BCM2835_I2S_TXON);
+
+	/* Start clock if not running */
+	clk_was_prepared = dev->clk_prepared;
+	if (!clk_was_prepared)
+		bcm2835_i2s_start_clock(dev);
+
+	/* Stop I2S module */
+	regmap_update_bits(dev->i2s_regmap, BCM2835_I2S_CS_A_REG, off, 0);
+
+	/*
+	 * Clear the FIFOs
+	 * Requires at least 2 PCM clock cycles to take effect
+	 */
+	regmap_update_bits(dev->i2s_regmap, BCM2835_I2S_CS_A_REG, clr, clr);
+
+	/* Wait for 2 PCM clock cycles */
+
+	/*
+	 * Toggle the SYNC flag. After 2 PCM clock cycles it can be read back
+	 * FIXME: This does not seem to work for slave mode!
+	 */
+	regmap_read(dev->i2s_regmap, BCM2835_I2S_CS_A_REG, &syncval);
+	syncval &= BCM2835_I2S_SYNC;
+
+	regmap_update_bits(dev->i2s_regmap, BCM2835_I2S_CS_A_REG,
+			BCM2835_I2S_SYNC, ~syncval);
+
+	/* Wait for the SYNC flag changing it's state */
+	while (--timeout) {
+		regmap_read(dev->i2s_regmap, BCM2835_I2S_CS_A_REG, &csreg);
+		if ((csreg & BCM2835_I2S_SYNC) != syncval)
+			break;
+	}
+
+	if (!timeout)
+		dev_err(dev->dev, "I2S SYNC error!\n");
+
+	/* Stop clock if it was not running before */
+	if (!clk_was_prepared)
+		bcm2835_i2s_stop_clock(dev);
+
+	/* Restore I2S state */
+	regmap_update_bits(dev->i2s_regmap, BCM2835_I2S_CS_A_REG,
+			BCM2835_I2S_RXON | BCM2835_I2S_TXON, i2s_active_state);
+}
+
+static int bcm2835_i2s_set_dai_fmt(struct snd_soc_dai *dai,
+				      unsigned int fmt)
+{
+	struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+	dev->fmt = fmt;
+	return 0;
+}
+
+static int bcm2835_i2s_set_dai_bclk_ratio(struct snd_soc_dai *dai,
+				      unsigned int ratio)
+{
+	struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	if (!ratio) {
+		dev->tdm_slots = 0;
+		return 0;
+	}
+
+	if (ratio > BCM2835_I2S_MAX_FRAME_LENGTH)
+		return -EINVAL;
+
+	dev->tdm_slots = 2;
+	dev->rx_mask = 0x03;
+	dev->tx_mask = 0x03;
+	dev->slot_width = ratio / 2;
+	dev->frame_length = ratio;
+
+	return 0;
+}
+
+static int bcm2835_i2s_set_dai_tdm_slot(struct snd_soc_dai *dai,
+	unsigned int tx_mask, unsigned int rx_mask,
+	int slots, int width)
+{
+	struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	if (slots) {
+		if (slots < 0 || width < 0)
+			return -EINVAL;
+
+		/* Limit masks to available slots */
+		rx_mask &= GENMASK(slots - 1, 0);
+		tx_mask &= GENMASK(slots - 1, 0);
+
+		/*
+		 * The driver is limited to 2-channel setups.
+		 * Check that exactly 2 bits are set in the masks.
+		 */
+		if (hweight_long((unsigned long) rx_mask) != 2
+		    || hweight_long((unsigned long) tx_mask) != 2)
+			return -EINVAL;
+
+		if (slots * width > BCM2835_I2S_MAX_FRAME_LENGTH)
+			return -EINVAL;
+	}
+
+	dev->tdm_slots = slots;
+
+	dev->rx_mask = rx_mask;
+	dev->tx_mask = tx_mask;
+	dev->slot_width = width;
+	dev->frame_length = slots * width;
+
+	return 0;
+}
+
+/*
+ * Convert logical slot number into physical slot number.
+ *
+ * If odd_offset is 0 sequential number is identical to logical number.
+ * This is used for DSP modes with slot numbering 0 1 2 3 ...
+ *
+ * Otherwise odd_offset defines the physical offset for odd numbered
+ * slots. This is used for I2S and left/right justified modes to
+ * translate from logical slot numbers 0 1 2 3 ... into physical slot
+ * numbers 0 2 ... 3 4 ...
+ */
+static int bcm2835_i2s_convert_slot(unsigned int slot, unsigned int odd_offset)
+{
+	if (!odd_offset)
+		return slot;
+
+	if (slot & 1)
+		return (slot >> 1) + odd_offset;
+
+	return slot >> 1;
+}
+
+/*
+ * Calculate channel position from mask and slot width.
+ *
+ * Mask must contain exactly 2 set bits.
+ * Lowest set bit is channel 1 position, highest set bit channel 2.
+ * The constant offset is added to both channel positions.
+ *
+ * If odd_offset is > 0 slot positions are translated to
+ * I2S-style TDM slot numbering ( 0 2 ... 3 4 ...) with odd
+ * logical slot numbers starting at physical slot odd_offset.
+ */
+static void bcm2835_i2s_calc_channel_pos(
+	unsigned int *ch1_pos, unsigned int *ch2_pos,
+	unsigned int mask, unsigned int width,
+	unsigned int bit_offset, unsigned int odd_offset)
+{
+	*ch1_pos = bcm2835_i2s_convert_slot((ffs(mask) - 1), odd_offset)
+			* width + bit_offset;
+	*ch2_pos = bcm2835_i2s_convert_slot((fls(mask) - 1), odd_offset)
+			* width + bit_offset;
+}
+
+static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *dai)
+{
+	struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+	unsigned int data_length, data_delay, framesync_length;
+	unsigned int slots, slot_width, odd_slot_offset;
+	int frame_length, bclk_rate;
+	unsigned int rx_mask, tx_mask;
+	unsigned int rx_ch1_pos, rx_ch2_pos, tx_ch1_pos, tx_ch2_pos;
+	unsigned int mode, format;
+	bool bit_clock_master = false;
+	bool frame_sync_master = false;
+	bool frame_start_falling_edge = false;
+	uint32_t csreg;
+	int ret = 0;
+
+	/*
+	 * If a stream is already enabled,
+	 * the registers are already set properly.
+	 */
+	regmap_read(dev->i2s_regmap, BCM2835_I2S_CS_A_REG, &csreg);
+
+	if (csreg & (BCM2835_I2S_TXON | BCM2835_I2S_RXON))
+		return 0;
+
+	data_length = params_width(params);
+	data_delay = 0;
+	odd_slot_offset = 0;
+	mode = 0;
+
+	if (dev->tdm_slots) {
+		slots = dev->tdm_slots;
+		slot_width = dev->slot_width;
+		frame_length = dev->frame_length;
+		rx_mask = dev->rx_mask;
+		tx_mask = dev->tx_mask;
+		bclk_rate = dev->frame_length * params_rate(params);
+	} else {
+		slots = 2;
+		slot_width = params_width(params);
+		rx_mask = 0x03;
+		tx_mask = 0x03;
+
+		frame_length = snd_soc_params_to_frame_size(params);
+		if (frame_length < 0)
+			return frame_length;
+
+		bclk_rate = snd_soc_params_to_bclk(params);
+		if (bclk_rate < 0)
+			return bclk_rate;
+	}
+
+	/* Check if data fits into slots */
+	if (data_length > slot_width)
+		return -EINVAL;
+
+	/* Check if CPU is bit clock master */
+	switch (dev->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+	case SND_SOC_DAIFMT_CBS_CFM:
+		bit_clock_master = true;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+	case SND_SOC_DAIFMT_CBM_CFM:
+		bit_clock_master = false;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Check if CPU is frame sync master */
+	switch (dev->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+	case SND_SOC_DAIFMT_CBM_CFS:
+		frame_sync_master = true;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+	case SND_SOC_DAIFMT_CBM_CFM:
+		frame_sync_master = false;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Clock should only be set up here if CPU is clock master */
+	if (bit_clock_master &&
+	    (!dev->clk_prepared || dev->clk_rate != bclk_rate)) {
+		if (dev->clk_prepared)
+			bcm2835_i2s_stop_clock(dev);
+
+		if (dev->clk_rate != bclk_rate) {
+			ret = clk_set_rate(dev->clk, bclk_rate);
+			if (ret)
+				return ret;
+			dev->clk_rate = bclk_rate;
+		}
+
+		bcm2835_i2s_start_clock(dev);
+	}
+
+	/* Setup the frame format */
+	format = BCM2835_I2S_CHEN;
+
+	if (data_length >= 24)
+		format |= BCM2835_I2S_CHWEX;
+
+	format |= BCM2835_I2S_CHWID((data_length-8)&0xf);
+
+	/* CH2 format is the same as for CH1 */
+	format = BCM2835_I2S_CH1(format) | BCM2835_I2S_CH2(format);
+
+	switch (dev->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		/* I2S mode needs an even number of slots */
+		if (slots & 1)
+			return -EINVAL;
+
+		/*
+		 * Use I2S-style logical slot numbering: even slots
+		 * are in first half of frame, odd slots in second half.
+		 */
+		odd_slot_offset = slots >> 1;
+
+		/* MSB starts one cycle after frame start */
+		data_delay = 1;
+
+		/* Setup frame sync signal for 50% duty cycle */
+		framesync_length = frame_length / 2;
+		frame_start_falling_edge = true;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		if (slots & 1)
+			return -EINVAL;
+
+		odd_slot_offset = slots >> 1;
+		data_delay = 0;
+		framesync_length = frame_length / 2;
+		frame_start_falling_edge = false;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		if (slots & 1)
+			return -EINVAL;
+
+		/* Odd frame lengths aren't supported */
+		if (frame_length & 1)
+			return -EINVAL;
+
+		odd_slot_offset = slots >> 1;
+		data_delay = slot_width - data_length;
+		framesync_length = frame_length / 2;
+		frame_start_falling_edge = false;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		data_delay = 1;
+		framesync_length = 1;
+		frame_start_falling_edge = false;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		data_delay = 0;
+		framesync_length = 1;
+		frame_start_falling_edge = false;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	bcm2835_i2s_calc_channel_pos(&rx_ch1_pos, &rx_ch2_pos,
+		rx_mask, slot_width, data_delay, odd_slot_offset);
+	bcm2835_i2s_calc_channel_pos(&tx_ch1_pos, &tx_ch2_pos,
+		tx_mask, slot_width, data_delay, odd_slot_offset);
+
+	/*
+	 * Transmitting data immediately after frame start, eg
+	 * in left-justified or DSP mode A, only works stable
+	 * if bcm2835 is the frame clock master.
+	 */
+	if ((!rx_ch1_pos || !tx_ch1_pos) && !frame_sync_master)
+		dev_warn(dev->dev,
+			"Unstable slave config detected, L/R may be swapped");
+
+	/*
+	 * Set format for both streams.
+	 * We cannot set another frame length
+	 * (and therefore word length) anyway,
+	 * so the format will be the same.
+	 */
+	regmap_write(dev->i2s_regmap, BCM2835_I2S_RXC_A_REG, 
+		  format
+		| BCM2835_I2S_CH1_POS(rx_ch1_pos)
+		| BCM2835_I2S_CH2_POS(rx_ch2_pos));
+	regmap_write(dev->i2s_regmap, BCM2835_I2S_TXC_A_REG, 
+		  format
+		| BCM2835_I2S_CH1_POS(tx_ch1_pos)
+		| BCM2835_I2S_CH2_POS(tx_ch2_pos));
+
+	/* Setup the I2S mode */
+
+	if (data_length <= 16) {
+		/*
+		 * Use frame packed mode (2 channels per 32 bit word)
+		 * We cannot set another frame length in the second stream
+		 * (and therefore word length) anyway,
+		 * so the format will be the same.
+		 */
+		mode |= BCM2835_I2S_FTXP | BCM2835_I2S_FRXP;
+	}
+
+	mode |= BCM2835_I2S_FLEN(frame_length - 1);
+	mode |= BCM2835_I2S_FSLEN(framesync_length);
+
+	/* CLKM selects bcm2835 clock slave mode */
+	if (!bit_clock_master)
+		mode |= BCM2835_I2S_CLKM;
+
+	/* FSM selects bcm2835 frame sync slave mode */
+	if (!frame_sync_master)
+		mode |= BCM2835_I2S_FSM;
+
+	/* CLKI selects normal clocking mode, sampling on rising edge */
+        switch (dev->fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+	case SND_SOC_DAIFMT_NB_IF:
+		mode |= BCM2835_I2S_CLKI;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+	case SND_SOC_DAIFMT_IB_IF:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* FSI selects frame start on falling edge */
+	switch (dev->fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+	case SND_SOC_DAIFMT_IB_NF:
+		if (frame_start_falling_edge)
+			mode |= BCM2835_I2S_FSI;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+	case SND_SOC_DAIFMT_IB_IF:
+		if (!frame_start_falling_edge)
+			mode |= BCM2835_I2S_FSI;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_write(dev->i2s_regmap, BCM2835_I2S_MODE_A_REG, mode);
+
+	/* Setup the DMA parameters */
+	regmap_update_bits(dev->i2s_regmap, BCM2835_I2S_CS_A_REG,
+			BCM2835_I2S_RXTHR(1)
+			| BCM2835_I2S_TXTHR(1)
+			| BCM2835_I2S_DMAEN, 0xffffffff);
+
+	regmap_update_bits(dev->i2s_regmap, BCM2835_I2S_DREQ_A_REG,
+			  BCM2835_I2S_TX_PANIC(0x10)
+			| BCM2835_I2S_RX_PANIC(0x30)
+			| BCM2835_I2S_TX(0x30)
+			| BCM2835_I2S_RX(0x20), 0xffffffff);
+
+	/* Clear FIFOs */
+	bcm2835_i2s_clear_fifos(dev, true, true);
+
+	dev_dbg(dev->dev,
+		"slots: %d width: %d rx mask: 0x%02x tx_mask: 0x%02x\n",
+		slots, slot_width, rx_mask, tx_mask);
+
+	dev_dbg(dev->dev, "frame len: %d sync len: %d data len: %d\n",
+		frame_length, framesync_length, data_length);
+
+	dev_dbg(dev->dev, "rx pos: %d,%d tx pos: %d,%d\n",
+		rx_ch1_pos, rx_ch2_pos, tx_ch1_pos, tx_ch2_pos);
+
+	dev_dbg(dev->dev, "sampling rate: %d bclk rate: %d\n",
+		params_rate(params), bclk_rate);
+
+	dev_dbg(dev->dev, "CLKM: %d CLKI: %d FSM: %d FSI: %d frame start: %s edge\n",
+		!!(mode & BCM2835_I2S_CLKM),
+		!!(mode & BCM2835_I2S_CLKI),
+		!!(mode & BCM2835_I2S_FSM),
+		!!(mode & BCM2835_I2S_FSI),
+		(mode & BCM2835_I2S_FSI) ? "falling" : "rising");
+
+	return ret;
+}
+
+static int bcm2835_i2s_prepare(struct snd_pcm_substream *substream,
+		struct snd_soc_dai *dai)
+{
+	struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+	uint32_t cs_reg;
+
+	/*
+	 * Clear both FIFOs if the one that should be started
+	 * is not empty at the moment. This should only happen
+	 * after overrun. Otherwise, hw_params would have cleared
+	 * the FIFO.
+	 */
+	regmap_read(dev->i2s_regmap, BCM2835_I2S_CS_A_REG, &cs_reg);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+			&& !(cs_reg & BCM2835_I2S_TXE))
+		bcm2835_i2s_clear_fifos(dev, true, false);
+	else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE
+			&& (cs_reg & BCM2835_I2S_RXD))
+		bcm2835_i2s_clear_fifos(dev, false, true);
+
+	return 0;
+}
+
+static void bcm2835_i2s_stop(struct bcm2835_i2s_dev *dev,
+		struct snd_pcm_substream *substream,
+		struct snd_soc_dai *dai)
+{
+	uint32_t mask;
+
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		mask = BCM2835_I2S_RXON;
+	else
+		mask = BCM2835_I2S_TXON;
+
+	regmap_update_bits(dev->i2s_regmap,
+			BCM2835_I2S_CS_A_REG, mask, 0);
+
+	/* Stop also the clock when not SND_SOC_DAIFMT_CONT */
+	if (!dai->active && !(dev->fmt & SND_SOC_DAIFMT_CONT))
+		bcm2835_i2s_stop_clock(dev);
+}
+
+static int bcm2835_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+	uint32_t mask;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		bcm2835_i2s_start_clock(dev);
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			mask = BCM2835_I2S_RXON;
+		else
+			mask = BCM2835_I2S_TXON;
+
+		regmap_update_bits(dev->i2s_regmap,
+				BCM2835_I2S_CS_A_REG, mask, mask);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		bcm2835_i2s_stop(dev, substream, dai);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bcm2835_i2s_startup(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	if (dai->active)
+		return 0;
+
+	/* Should this still be running stop it */
+	bcm2835_i2s_stop_clock(dev);
+
+	/* Enable PCM block */
+	regmap_update_bits(dev->i2s_regmap, BCM2835_I2S_CS_A_REG,
+			BCM2835_I2S_EN, BCM2835_I2S_EN);
+
+	/*
+	 * Disable STBY.
+	 * Requires at least 4 PCM clock cycles to take effect.
+	 */
+	regmap_update_bits(dev->i2s_regmap, BCM2835_I2S_CS_A_REG,
+			BCM2835_I2S_STBY, BCM2835_I2S_STBY);
+
+	return 0;
+}
+
+static void bcm2835_i2s_shutdown(struct snd_pcm_substream *substream,
+		struct snd_soc_dai *dai)
+{
+	struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	bcm2835_i2s_stop(dev, substream, dai);
+
+	/* If both streams are stopped, disable module and clock */
+	if (dai->active)
+		return;
+
+	/* Disable the module */
+	regmap_update_bits(dev->i2s_regmap, BCM2835_I2S_CS_A_REG,
+			BCM2835_I2S_EN, 0);
+
+	/*
+	 * Stopping clock is necessary, because stop does
+	 * not stop the clock when SND_SOC_DAIFMT_CONT
+	 */
+	bcm2835_i2s_stop_clock(dev);
+}
+
+static const struct snd_soc_dai_ops bcm2835_i2s_dai_ops = {
+	.startup	= bcm2835_i2s_startup,
+	.shutdown	= bcm2835_i2s_shutdown,
+	.prepare	= bcm2835_i2s_prepare,
+	.trigger	= bcm2835_i2s_trigger,
+	.hw_params	= bcm2835_i2s_hw_params,
+	.set_fmt	= bcm2835_i2s_set_dai_fmt,
+	.set_bclk_ratio	= bcm2835_i2s_set_dai_bclk_ratio,
+	.set_tdm_slot	= bcm2835_i2s_set_dai_tdm_slot,
+};
+
+static int bcm2835_i2s_dai_probe(struct snd_soc_dai *dai)
+{
+	struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_init_dma_data(dai,
+			&dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK],
+			&dev->dma_data[SNDRV_PCM_STREAM_CAPTURE]);
+
+	return 0;
+}
+
+static struct snd_soc_dai_driver bcm2835_i2s_dai = {
+	.name	= "bcm2835-i2s",
+	.probe	= bcm2835_i2s_dai_probe,
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates =	SNDRV_PCM_RATE_CONTINUOUS,
+		.rate_min =	8000,
+		.rate_max =	384000,
+		.formats =	SNDRV_PCM_FMTBIT_S16_LE
+				| SNDRV_PCM_FMTBIT_S24_LE
+				| SNDRV_PCM_FMTBIT_S32_LE
+		},
+	.capture = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates =	SNDRV_PCM_RATE_CONTINUOUS,
+		.rate_min =	8000,
+		.rate_max =	384000,
+		.formats =	SNDRV_PCM_FMTBIT_S16_LE
+				| SNDRV_PCM_FMTBIT_S24_LE
+				| SNDRV_PCM_FMTBIT_S32_LE
+		},
+	.ops = &bcm2835_i2s_dai_ops,
+	.symmetric_rates = 1,
+	.symmetric_samplebits = 1,
+};
+
+static bool bcm2835_i2s_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BCM2835_I2S_CS_A_REG:
+	case BCM2835_I2S_FIFO_A_REG:
+	case BCM2835_I2S_INTSTC_A_REG:
+	case BCM2835_I2S_GRAY_REG:
+		return true;
+	default:
+		return false;
+	};
+}
+
+static bool bcm2835_i2s_precious_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BCM2835_I2S_FIFO_A_REG:
+		return true;
+	default:
+		return false;
+	};
+}
+
+static const struct regmap_config bcm2835_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = BCM2835_I2S_GRAY_REG,
+	.precious_reg = bcm2835_i2s_precious_reg,
+	.volatile_reg = bcm2835_i2s_volatile_reg,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static const struct snd_soc_component_driver bcm2835_i2s_component = {
+	.name		= "bcm2835-i2s-comp",
+};
+
+static int bcm2835_i2s_probe(struct platform_device *pdev)
+{
+	struct bcm2835_i2s_dev *dev;
+	int ret;
+	struct resource *mem;
+	void __iomem *base;
+	const __be32 *addr;
+	dma_addr_t dma_base;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev),
+			   GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	/* get the clock */
+	dev->clk_prepared = false;
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk)) {
+		dev_err(&pdev->dev, "could not get clk: %ld\n",
+			PTR_ERR(dev->clk));
+		return PTR_ERR(dev->clk);
+	}
+
+	/* Request ioarea */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	dev->i2s_regmap = devm_regmap_init_mmio(&pdev->dev, base,
+				&bcm2835_regmap_config);
+	if (IS_ERR(dev->i2s_regmap))
+		return PTR_ERR(dev->i2s_regmap);
+
+	/* Set the DMA address - we have to parse DT ourselves */
+	addr = of_get_address(pdev->dev.of_node, 0, NULL, NULL);
+	if (!addr) {
+		dev_err(&pdev->dev, "could not get DMA-register address\n");
+		return -EINVAL;
+	}
+	dma_base = be32_to_cpup(addr);
+
+	dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr =
+		dma_base + BCM2835_I2S_FIFO_A_REG;
+
+	dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr =
+		dma_base + BCM2835_I2S_FIFO_A_REG;
+
+	/* Set the bus width */
+	dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	/* Set burst */
+	dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].maxburst = 2;
+	dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].maxburst = 2;
+
+	/*
+	 * Set the PACK flag to enable S16_LE support (2 S16_LE values
+	 * packed into 32-bit transfers).
+	 */
+	dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].flags =
+		SND_DMAENGINE_PCM_DAI_FLAG_PACK;
+	dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].flags =
+		SND_DMAENGINE_PCM_DAI_FLAG_PACK;
+
+	/* Store the pdev */
+	dev->dev = &pdev->dev;
+	dev_set_drvdata(&pdev->dev, dev);
+
+	ret = devm_snd_soc_register_component(&pdev->dev,
+			&bcm2835_i2s_component, &bcm2835_i2s_dai, 1);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not register DAI: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not register PCM: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id bcm2835_i2s_of_match[] = {
+	{ .compatible = "brcm,bcm2835-i2s", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, bcm2835_i2s_of_match);
+
+static struct platform_driver bcm2835_i2s_driver = {
+	.probe		= bcm2835_i2s_probe,
+	.driver		= {
+		.name	= "bcm2835-i2s",
+		.of_match_table = bcm2835_i2s_of_match,
+	},
+};
+
+module_platform_driver(bcm2835_i2s_driver);
+
+MODULE_ALIAS("platform:bcm2835-i2s");
+MODULE_DESCRIPTION("BCM2835 I2S interface");
+MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/bcm/cygnus-pcm.c b/sound/soc/bcm/cygnus-pcm.c
new file mode 100644
index 000000000..123ecf547
--- /dev/null
+++ b/sound/soc/bcm/cygnus-pcm.c
@@ -0,0 +1,860 @@
+/*
+ * Copyright (C) 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/debugfs.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "cygnus-ssp.h"
+
+/* Register offset needed for ASoC PCM module */
+
+#define INTH_R5F_STATUS_OFFSET     0x040
+#define INTH_R5F_CLEAR_OFFSET      0x048
+#define INTH_R5F_MASK_SET_OFFSET   0x050
+#define INTH_R5F_MASK_CLEAR_OFFSET 0x054
+
+#define BF_REARM_FREE_MARK_OFFSET 0x344
+#define BF_REARM_FULL_MARK_OFFSET 0x348
+
+/* Ring Buffer Ctrl Regs --- Start */
+/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_RDADDR_REG_BASE */
+#define SRC_RBUF_0_RDADDR_OFFSET 0x500
+#define SRC_RBUF_1_RDADDR_OFFSET 0x518
+#define SRC_RBUF_2_RDADDR_OFFSET 0x530
+#define SRC_RBUF_3_RDADDR_OFFSET 0x548
+#define SRC_RBUF_4_RDADDR_OFFSET 0x560
+#define SRC_RBUF_5_RDADDR_OFFSET 0x578
+#define SRC_RBUF_6_RDADDR_OFFSET 0x590
+
+/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_WRADDR_REG_BASE */
+#define SRC_RBUF_0_WRADDR_OFFSET 0x504
+#define SRC_RBUF_1_WRADDR_OFFSET 0x51c
+#define SRC_RBUF_2_WRADDR_OFFSET 0x534
+#define SRC_RBUF_3_WRADDR_OFFSET 0x54c
+#define SRC_RBUF_4_WRADDR_OFFSET 0x564
+#define SRC_RBUF_5_WRADDR_OFFSET 0x57c
+#define SRC_RBUF_6_WRADDR_OFFSET 0x594
+
+/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_BASEADDR_REG_BASE */
+#define SRC_RBUF_0_BASEADDR_OFFSET 0x508
+#define SRC_RBUF_1_BASEADDR_OFFSET 0x520
+#define SRC_RBUF_2_BASEADDR_OFFSET 0x538
+#define SRC_RBUF_3_BASEADDR_OFFSET 0x550
+#define SRC_RBUF_4_BASEADDR_OFFSET 0x568
+#define SRC_RBUF_5_BASEADDR_OFFSET 0x580
+#define SRC_RBUF_6_BASEADDR_OFFSET 0x598
+
+/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_ENDADDR_REG_BASE */
+#define SRC_RBUF_0_ENDADDR_OFFSET 0x50c
+#define SRC_RBUF_1_ENDADDR_OFFSET 0x524
+#define SRC_RBUF_2_ENDADDR_OFFSET 0x53c
+#define SRC_RBUF_3_ENDADDR_OFFSET 0x554
+#define SRC_RBUF_4_ENDADDR_OFFSET 0x56c
+#define SRC_RBUF_5_ENDADDR_OFFSET 0x584
+#define SRC_RBUF_6_ENDADDR_OFFSET 0x59c
+
+/* AUD_FMM_BF_CTRL_SOURCECH_RINGBUF_X_FREE_MARK_REG_BASE */
+#define SRC_RBUF_0_FREE_MARK_OFFSET 0x510
+#define SRC_RBUF_1_FREE_MARK_OFFSET 0x528
+#define SRC_RBUF_2_FREE_MARK_OFFSET 0x540
+#define SRC_RBUF_3_FREE_MARK_OFFSET 0x558
+#define SRC_RBUF_4_FREE_MARK_OFFSET 0x570
+#define SRC_RBUF_5_FREE_MARK_OFFSET 0x588
+#define SRC_RBUF_6_FREE_MARK_OFFSET 0x5a0
+
+/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_RDADDR_REG_BASE */
+#define DST_RBUF_0_RDADDR_OFFSET 0x5c0
+#define DST_RBUF_1_RDADDR_OFFSET 0x5d8
+#define DST_RBUF_2_RDADDR_OFFSET 0x5f0
+#define DST_RBUF_3_RDADDR_OFFSET 0x608
+#define DST_RBUF_4_RDADDR_OFFSET 0x620
+#define DST_RBUF_5_RDADDR_OFFSET 0x638
+
+/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_WRADDR_REG_BASE */
+#define DST_RBUF_0_WRADDR_OFFSET 0x5c4
+#define DST_RBUF_1_WRADDR_OFFSET 0x5dc
+#define DST_RBUF_2_WRADDR_OFFSET 0x5f4
+#define DST_RBUF_3_WRADDR_OFFSET 0x60c
+#define DST_RBUF_4_WRADDR_OFFSET 0x624
+#define DST_RBUF_5_WRADDR_OFFSET 0x63c
+
+/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_BASEADDR_REG_BASE */
+#define DST_RBUF_0_BASEADDR_OFFSET 0x5c8
+#define DST_RBUF_1_BASEADDR_OFFSET 0x5e0
+#define DST_RBUF_2_BASEADDR_OFFSET 0x5f8
+#define DST_RBUF_3_BASEADDR_OFFSET 0x610
+#define DST_RBUF_4_BASEADDR_OFFSET 0x628
+#define DST_RBUF_5_BASEADDR_OFFSET 0x640
+
+/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_ENDADDR_REG_BASE */
+#define DST_RBUF_0_ENDADDR_OFFSET 0x5cc
+#define DST_RBUF_1_ENDADDR_OFFSET 0x5e4
+#define DST_RBUF_2_ENDADDR_OFFSET 0x5fc
+#define DST_RBUF_3_ENDADDR_OFFSET 0x614
+#define DST_RBUF_4_ENDADDR_OFFSET 0x62c
+#define DST_RBUF_5_ENDADDR_OFFSET 0x644
+
+/* AUD_FMM_BF_CTRL_DESTCH_RINGBUF_X_FULL_MARK_REG_BASE */
+#define DST_RBUF_0_FULL_MARK_OFFSET 0x5d0
+#define DST_RBUF_1_FULL_MARK_OFFSET 0x5e8
+#define DST_RBUF_2_FULL_MARK_OFFSET 0x600
+#define DST_RBUF_3_FULL_MARK_OFFSET 0x618
+#define DST_RBUF_4_FULL_MARK_OFFSET 0x630
+#define DST_RBUF_5_FULL_MARK_OFFSET 0x648
+/* Ring Buffer Ctrl Regs --- End */
+
+/* Error Status Regs --- Start */
+/* AUD_FMM_BF_ESR_ESRX_STATUS_REG_BASE */
+#define ESR0_STATUS_OFFSET 0x900
+#define ESR1_STATUS_OFFSET 0x918
+#define ESR2_STATUS_OFFSET 0x930
+#define ESR3_STATUS_OFFSET 0x948
+#define ESR4_STATUS_OFFSET 0x960
+
+/* AUD_FMM_BF_ESR_ESRX_STATUS_CLEAR_REG_BASE */
+#define ESR0_STATUS_CLR_OFFSET 0x908
+#define ESR1_STATUS_CLR_OFFSET 0x920
+#define ESR2_STATUS_CLR_OFFSET 0x938
+#define ESR3_STATUS_CLR_OFFSET 0x950
+#define ESR4_STATUS_CLR_OFFSET 0x968
+
+/* AUD_FMM_BF_ESR_ESRX_MASK_REG_BASE */
+#define ESR0_MASK_STATUS_OFFSET 0x90c
+#define ESR1_MASK_STATUS_OFFSET 0x924
+#define ESR2_MASK_STATUS_OFFSET 0x93c
+#define ESR3_MASK_STATUS_OFFSET 0x954
+#define ESR4_MASK_STATUS_OFFSET 0x96c
+
+/* AUD_FMM_BF_ESR_ESRX_MASK_SET_REG_BASE */
+#define ESR0_MASK_SET_OFFSET 0x910
+#define ESR1_MASK_SET_OFFSET 0x928
+#define ESR2_MASK_SET_OFFSET 0x940
+#define ESR3_MASK_SET_OFFSET 0x958
+#define ESR4_MASK_SET_OFFSET 0x970
+
+/* AUD_FMM_BF_ESR_ESRX_MASK_CLEAR_REG_BASE */
+#define ESR0_MASK_CLR_OFFSET 0x914
+#define ESR1_MASK_CLR_OFFSET 0x92c
+#define ESR2_MASK_CLR_OFFSET 0x944
+#define ESR3_MASK_CLR_OFFSET 0x95c
+#define ESR4_MASK_CLR_OFFSET 0x974
+/* Error Status Regs --- End */
+
+#define R5F_ESR0_SHIFT  0    /* esr0 = fifo underflow */
+#define R5F_ESR1_SHIFT  1    /* esr1 = ringbuf underflow */
+#define R5F_ESR2_SHIFT  2    /* esr2 = ringbuf overflow */
+#define R5F_ESR3_SHIFT  3    /* esr3 = freemark */
+#define R5F_ESR4_SHIFT  4    /* esr4 = fullmark */
+
+
+/* Mask for R5F register.  Set all relevant interrupt for playback handler */
+#define ANY_PLAYBACK_IRQ  (BIT(R5F_ESR0_SHIFT) | \
+			   BIT(R5F_ESR1_SHIFT) | \
+			   BIT(R5F_ESR3_SHIFT))
+
+/* Mask for R5F register.  Set all relevant interrupt for capture handler */
+#define ANY_CAPTURE_IRQ   (BIT(R5F_ESR2_SHIFT) | BIT(R5F_ESR4_SHIFT))
+
+/*
+ * PERIOD_BYTES_MIN is the number of bytes to at which the interrupt will tick.
+ * This number should be a multiple of 256. Minimum value is 256
+ */
+#define PERIOD_BYTES_MIN 0x100
+
+static const struct snd_pcm_hardware cygnus_pcm_hw = {
+	.info = SNDRV_PCM_INFO_MMAP |
+			SNDRV_PCM_INFO_MMAP_VALID |
+			SNDRV_PCM_INFO_INTERLEAVED,
+	.formats = SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S32_LE,
+
+	/* A period is basically an interrupt */
+	.period_bytes_min = PERIOD_BYTES_MIN,
+	.period_bytes_max = 0x10000,
+
+	/* period_min/max gives range of approx interrupts per buffer */
+	.periods_min = 2,
+	.periods_max = 8,
+
+	/*
+	 * maximum buffer size in bytes = period_bytes_max * periods_max
+	 * We allocate this amount of data for each enabled channel
+	 */
+	.buffer_bytes_max = 4 * 0x8000,
+};
+
+static u64 cygnus_dma_dmamask = DMA_BIT_MASK(32);
+
+static struct cygnus_aio_port *cygnus_dai_get_dma_data(
+				struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+
+	return snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
+}
+
+static void ringbuf_set_initial(void __iomem *audio_io,
+		struct ringbuf_regs *p_rbuf,
+		bool is_playback,
+		u32 start,
+		u32 periodsize,
+		u32 bufsize)
+{
+	u32 initial_rd;
+	u32 initial_wr;
+	u32 end;
+	u32 fmark_val; /* free or full mark */
+
+	p_rbuf->period_bytes = periodsize;
+	p_rbuf->buf_size = bufsize;
+
+	if (is_playback) {
+		/* Set the pointers to indicate full (flip uppermost bit) */
+		initial_rd = start;
+		initial_wr = initial_rd ^ BIT(31);
+	} else {
+		/* Set the pointers to indicate empty */
+		initial_wr = start;
+		initial_rd = initial_wr;
+	}
+
+	end = start + bufsize - 1;
+
+	/*
+	 * The interrupt will fire when free/full mark is *exceeded*
+	 * The fmark value must be multiple of PERIOD_BYTES_MIN so set fmark
+	 * to be PERIOD_BYTES_MIN less than the period size.
+	 */
+	fmark_val = periodsize - PERIOD_BYTES_MIN;
+
+	writel(start, audio_io + p_rbuf->baseaddr);
+	writel(end, audio_io + p_rbuf->endaddr);
+	writel(fmark_val, audio_io + p_rbuf->fmark);
+	writel(initial_rd, audio_io + p_rbuf->rdaddr);
+	writel(initial_wr, audio_io + p_rbuf->wraddr);
+}
+
+static int configure_ringbuf_regs(struct snd_pcm_substream *substream)
+{
+	struct cygnus_aio_port *aio;
+	struct ringbuf_regs *p_rbuf;
+	int status = 0;
+
+	aio = cygnus_dai_get_dma_data(substream);
+
+	/* Map the ssp portnum to a set of ring buffers. */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		p_rbuf = &aio->play_rb_regs;
+
+		switch (aio->portnum) {
+		case 0:
+			*p_rbuf = RINGBUF_REG_PLAYBACK(0);
+			break;
+		case 1:
+			*p_rbuf = RINGBUF_REG_PLAYBACK(2);
+			break;
+		case 2:
+			*p_rbuf = RINGBUF_REG_PLAYBACK(4);
+			break;
+		case 3: /* SPDIF */
+			*p_rbuf = RINGBUF_REG_PLAYBACK(6);
+			break;
+		default:
+			status = -EINVAL;
+		}
+	} else {
+		p_rbuf = &aio->capture_rb_regs;
+
+		switch (aio->portnum) {
+		case 0:
+			*p_rbuf = RINGBUF_REG_CAPTURE(0);
+			break;
+		case 1:
+			*p_rbuf = RINGBUF_REG_CAPTURE(2);
+			break;
+		case 2:
+			*p_rbuf = RINGBUF_REG_CAPTURE(4);
+			break;
+		default:
+			status = -EINVAL;
+		}
+	}
+
+	return status;
+}
+
+static struct ringbuf_regs *get_ringbuf(struct snd_pcm_substream *substream)
+{
+	struct cygnus_aio_port *aio;
+	struct ringbuf_regs *p_rbuf = NULL;
+
+	aio = cygnus_dai_get_dma_data(substream);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		p_rbuf = &aio->play_rb_regs;
+	else
+		p_rbuf = &aio->capture_rb_regs;
+
+	return p_rbuf;
+}
+
+static void enable_intr(struct snd_pcm_substream *substream)
+{
+	struct cygnus_aio_port *aio;
+	u32 clear_mask;
+
+	aio = cygnus_dai_get_dma_data(substream);
+
+	/* The port number maps to the bit position to be cleared */
+	clear_mask = BIT(aio->portnum);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		/* Clear interrupt status before enabling them */
+		writel(clear_mask, aio->cygaud->audio + ESR0_STATUS_CLR_OFFSET);
+		writel(clear_mask, aio->cygaud->audio + ESR1_STATUS_CLR_OFFSET);
+		writel(clear_mask, aio->cygaud->audio + ESR3_STATUS_CLR_OFFSET);
+		/* Unmask the interrupts of the given port*/
+		writel(clear_mask, aio->cygaud->audio + ESR0_MASK_CLR_OFFSET);
+		writel(clear_mask, aio->cygaud->audio + ESR1_MASK_CLR_OFFSET);
+		writel(clear_mask, aio->cygaud->audio + ESR3_MASK_CLR_OFFSET);
+
+		writel(ANY_PLAYBACK_IRQ,
+			aio->cygaud->audio + INTH_R5F_MASK_CLEAR_OFFSET);
+	} else {
+		writel(clear_mask, aio->cygaud->audio + ESR2_STATUS_CLR_OFFSET);
+		writel(clear_mask, aio->cygaud->audio + ESR4_STATUS_CLR_OFFSET);
+		writel(clear_mask, aio->cygaud->audio + ESR2_MASK_CLR_OFFSET);
+		writel(clear_mask, aio->cygaud->audio + ESR4_MASK_CLR_OFFSET);
+
+		writel(ANY_CAPTURE_IRQ,
+			aio->cygaud->audio + INTH_R5F_MASK_CLEAR_OFFSET);
+	}
+
+}
+
+static void disable_intr(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct cygnus_aio_port *aio;
+	u32 set_mask;
+
+	aio = cygnus_dai_get_dma_data(substream);
+
+	dev_dbg(rtd->cpu_dai->dev, "%s on port %d\n", __func__, aio->portnum);
+
+	/* The port number maps to the bit position to be set */
+	set_mask = BIT(aio->portnum);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		/* Mask the interrupts of the given port*/
+		writel(set_mask, aio->cygaud->audio + ESR0_MASK_SET_OFFSET);
+		writel(set_mask, aio->cygaud->audio + ESR1_MASK_SET_OFFSET);
+		writel(set_mask, aio->cygaud->audio + ESR3_MASK_SET_OFFSET);
+	} else {
+		writel(set_mask, aio->cygaud->audio + ESR2_MASK_SET_OFFSET);
+		writel(set_mask, aio->cygaud->audio + ESR4_MASK_SET_OFFSET);
+	}
+
+}
+
+static int cygnus_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	int ret = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		enable_intr(substream);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		disable_intr(substream);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void cygnus_pcm_period_elapsed(struct snd_pcm_substream *substream)
+{
+	struct cygnus_aio_port *aio;
+	struct ringbuf_regs *p_rbuf = NULL;
+	u32 regval;
+
+	aio = cygnus_dai_get_dma_data(substream);
+
+	p_rbuf = get_ringbuf(substream);
+
+	/*
+	 * If free/full mark interrupt occurs, provide timestamp
+	 * to ALSA and update appropriate idx by period_bytes
+	 */
+	snd_pcm_period_elapsed(substream);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		/* Set the ring buffer to full */
+		regval = readl(aio->cygaud->audio + p_rbuf->rdaddr);
+		regval = regval ^ BIT(31);
+		writel(regval, aio->cygaud->audio + p_rbuf->wraddr);
+	} else {
+		/* Set the ring buffer to empty */
+		regval = readl(aio->cygaud->audio + p_rbuf->wraddr);
+		writel(regval, aio->cygaud->audio + p_rbuf->rdaddr);
+	}
+}
+
+/*
+ * ESR0/1/3 status  Description
+ *  0x1	I2S0_out port caused interrupt
+ *  0x2	I2S1_out port caused interrupt
+ *  0x4	I2S2_out port caused interrupt
+ *  0x8	SPDIF_out port caused interrupt
+ */
+static void handle_playback_irq(struct cygnus_audio *cygaud)
+{
+	void __iomem *audio_io;
+	u32 port;
+	u32 esr_status0, esr_status1, esr_status3;
+
+	audio_io = cygaud->audio;
+
+	/*
+	 * ESR status gets updates with/without interrupts enabled.
+	 * So, check the ESR mask, which provides interrupt enable/
+	 * disable status and use it to determine which ESR status
+	 * should be serviced.
+	 */
+	esr_status0 = readl(audio_io + ESR0_STATUS_OFFSET);
+	esr_status0 &= ~readl(audio_io + ESR0_MASK_STATUS_OFFSET);
+	esr_status1 = readl(audio_io + ESR1_STATUS_OFFSET);
+	esr_status1 &= ~readl(audio_io + ESR1_MASK_STATUS_OFFSET);
+	esr_status3 = readl(audio_io + ESR3_STATUS_OFFSET);
+	esr_status3 &= ~readl(audio_io + ESR3_MASK_STATUS_OFFSET);
+
+	for (port = 0; port < CYGNUS_MAX_PLAYBACK_PORTS; port++) {
+		u32 esrmask = BIT(port);
+
+		/*
+		 * Ringbuffer or FIFO underflow
+		 * If we get this interrupt then, it is also true that we have
+		 * not yet responded to the freemark interrupt.
+		 * Log a debug message.  The freemark handler below will
+		 * handle getting everything going again.
+		 */
+		if ((esrmask & esr_status1) || (esrmask & esr_status0)) {
+			dev_dbg(cygaud->dev,
+				"Underrun: esr0=0x%x, esr1=0x%x esr3=0x%x\n",
+				esr_status0, esr_status1, esr_status3);
+		}
+
+		/*
+		 * Freemark is hit. This is the normal interrupt.
+		 * In typical operation the read and write regs will be equal
+		 */
+		if (esrmask & esr_status3) {
+			struct snd_pcm_substream *playstr;
+
+			playstr = cygaud->portinfo[port].play_stream;
+			cygnus_pcm_period_elapsed(playstr);
+		}
+	}
+
+	/* Clear ESR interrupt */
+	writel(esr_status0, audio_io + ESR0_STATUS_CLR_OFFSET);
+	writel(esr_status1, audio_io + ESR1_STATUS_CLR_OFFSET);
+	writel(esr_status3, audio_io + ESR3_STATUS_CLR_OFFSET);
+	/* Rearm freemark logic by writing 1 to the correct bit */
+	writel(esr_status3, audio_io + BF_REARM_FREE_MARK_OFFSET);
+}
+
+/*
+ * ESR2/4 status  Description
+ *  0x1	I2S0_in port caused interrupt
+ *  0x2	I2S1_in port caused interrupt
+ *  0x4	I2S2_in port caused interrupt
+ */
+static void handle_capture_irq(struct cygnus_audio *cygaud)
+{
+	void __iomem *audio_io;
+	u32 port;
+	u32 esr_status2, esr_status4;
+
+	audio_io = cygaud->audio;
+
+	/*
+	 * ESR status gets updates with/without interrupts enabled.
+	 * So, check the ESR mask, which provides interrupt enable/
+	 * disable status and use it to determine which ESR status
+	 * should be serviced.
+	 */
+	esr_status2 = readl(audio_io + ESR2_STATUS_OFFSET);
+	esr_status2 &= ~readl(audio_io + ESR2_MASK_STATUS_OFFSET);
+	esr_status4 = readl(audio_io + ESR4_STATUS_OFFSET);
+	esr_status4 &= ~readl(audio_io + ESR4_MASK_STATUS_OFFSET);
+
+	for (port = 0; port < CYGNUS_MAX_CAPTURE_PORTS; port++) {
+		u32 esrmask = BIT(port);
+
+		/*
+		 * Ringbuffer or FIFO overflow
+		 * If we get this interrupt then, it is also true that we have
+		 * not yet responded to the fullmark interrupt.
+		 * Log a debug message.  The fullmark handler below will
+		 * handle getting everything going again.
+		 */
+		if (esrmask & esr_status2)
+			dev_dbg(cygaud->dev,
+				"Overflow: esr2=0x%x\n", esr_status2);
+
+		if (esrmask & esr_status4) {
+			struct snd_pcm_substream *capstr;
+
+			capstr = cygaud->portinfo[port].capture_stream;
+			cygnus_pcm_period_elapsed(capstr);
+		}
+	}
+
+	writel(esr_status2, audio_io + ESR2_STATUS_CLR_OFFSET);
+	writel(esr_status4, audio_io + ESR4_STATUS_CLR_OFFSET);
+	/* Rearm fullmark logic by writing 1 to the correct bit */
+	writel(esr_status4, audio_io + BF_REARM_FULL_MARK_OFFSET);
+}
+
+static irqreturn_t cygnus_dma_irq(int irq, void *data)
+{
+	u32 r5_status;
+	struct cygnus_audio *cygaud = data;
+
+	/*
+	 * R5 status bits	Description
+	 *  0		ESR0 (playback FIFO interrupt)
+	 *  1		ESR1 (playback rbuf interrupt)
+	 *  2		ESR2 (capture rbuf interrupt)
+	 *  3		ESR3 (Freemark play. interrupt)
+	 *  4		ESR4 (Fullmark capt. interrupt)
+	 */
+	r5_status = readl(cygaud->audio + INTH_R5F_STATUS_OFFSET);
+
+	if (!(r5_status & (ANY_PLAYBACK_IRQ | ANY_CAPTURE_IRQ)))
+		return IRQ_NONE;
+
+	/* If playback interrupt happened */
+	if (ANY_PLAYBACK_IRQ & r5_status) {
+		handle_playback_irq(cygaud);
+		writel(ANY_PLAYBACK_IRQ & r5_status,
+			cygaud->audio + INTH_R5F_CLEAR_OFFSET);
+	}
+
+	/* If  capture interrupt happened */
+	if (ANY_CAPTURE_IRQ & r5_status) {
+		handle_capture_irq(cygaud);
+		writel(ANY_CAPTURE_IRQ & r5_status,
+			cygaud->audio + INTH_R5F_CLEAR_OFFSET);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int cygnus_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct cygnus_aio_port *aio;
+	int ret;
+
+	aio = cygnus_dai_get_dma_data(substream);
+	if (!aio)
+		return -ENODEV;
+
+	dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum);
+
+	snd_soc_set_runtime_hwparams(substream, &cygnus_pcm_hw);
+
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+		SNDRV_PCM_HW_PARAM_PERIOD_BYTES, PERIOD_BYTES_MIN);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+		SNDRV_PCM_HW_PARAM_BUFFER_BYTES, PERIOD_BYTES_MIN);
+	if (ret < 0)
+		return ret;
+	/*
+	 * Keep track of which substream belongs to which port.
+	 * This info is needed by snd_pcm_period_elapsed() in irq_handler
+	 */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		aio->play_stream = substream;
+	else
+		aio->capture_stream = substream;
+
+	return 0;
+}
+
+static int cygnus_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct cygnus_aio_port *aio;
+
+	aio = cygnus_dai_get_dma_data(substream);
+
+	dev_dbg(rtd->cpu_dai->dev, "%s  port %d\n", __func__, aio->portnum);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		aio->play_stream = NULL;
+	else
+		aio->capture_stream = NULL;
+
+	if (!aio->play_stream && !aio->capture_stream)
+		dev_dbg(rtd->cpu_dai->dev, "freed  port %d\n", aio->portnum);
+
+	return 0;
+}
+
+static int cygnus_pcm_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct cygnus_aio_port *aio;
+	int ret = 0;
+
+	aio = cygnus_dai_get_dma_data(substream);
+	dev_dbg(rtd->cpu_dai->dev, "%s  port %d\n", __func__, aio->portnum);
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+	runtime->dma_bytes = params_buffer_bytes(params);
+
+	return ret;
+}
+
+static int cygnus_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct cygnus_aio_port *aio;
+
+	aio = cygnus_dai_get_dma_data(substream);
+	dev_dbg(rtd->cpu_dai->dev, "%s  port %d\n", __func__, aio->portnum);
+
+	snd_pcm_set_runtime_buffer(substream, NULL);
+	return 0;
+}
+
+static int cygnus_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct cygnus_aio_port *aio;
+	unsigned long bufsize, periodsize;
+	int ret = 0;
+	bool is_play;
+	u32 start;
+	struct ringbuf_regs *p_rbuf = NULL;
+
+	aio = cygnus_dai_get_dma_data(substream);
+	dev_dbg(rtd->cpu_dai->dev, "%s port %d\n", __func__, aio->portnum);
+
+	bufsize = snd_pcm_lib_buffer_bytes(substream);
+	periodsize = snd_pcm_lib_period_bytes(substream);
+
+	dev_dbg(rtd->cpu_dai->dev, "%s (buf_size %lu) (period_size %lu)\n",
+			__func__, bufsize, periodsize);
+
+	configure_ringbuf_regs(substream);
+
+	p_rbuf = get_ringbuf(substream);
+
+	start = runtime->dma_addr;
+
+	is_play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 1 : 0;
+
+	ringbuf_set_initial(aio->cygaud->audio, p_rbuf, is_play, start,
+				periodsize, bufsize);
+
+	return ret;
+}
+
+static snd_pcm_uframes_t cygnus_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct cygnus_aio_port *aio;
+	unsigned int res = 0, cur = 0, base = 0;
+	struct ringbuf_regs *p_rbuf = NULL;
+
+	aio = cygnus_dai_get_dma_data(substream);
+
+	/*
+	 * Get the offset of the current read (for playack) or write
+	 * index (for capture).  Report this value back to the asoc framework.
+	 */
+	p_rbuf = get_ringbuf(substream);
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		cur = readl(aio->cygaud->audio + p_rbuf->rdaddr);
+	else
+		cur = readl(aio->cygaud->audio + p_rbuf->wraddr);
+
+	base = readl(aio->cygaud->audio + p_rbuf->baseaddr);
+
+	/*
+	 * Mask off the MSB of the rdaddr,wraddr and baseaddr
+	 * since MSB is not part of the address
+	 */
+	res = (cur & 0x7fffffff) - (base & 0x7fffffff);
+
+	return bytes_to_frames(substream->runtime, res);
+}
+
+static int cygnus_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size;
+
+	size = cygnus_pcm_hw.buffer_bytes_max;
+
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+	buf->area = dma_alloc_coherent(pcm->card->dev, size,
+			&buf->addr, GFP_KERNEL);
+
+	dev_dbg(rtd->cpu_dai->dev, "%s: size 0x%zx @ %pK\n",
+				__func__, size, buf->area);
+
+	if (!buf->area) {
+		dev_err(rtd->cpu_dai->dev, "%s: dma_alloc failed\n", __func__);
+		return -ENOMEM;
+	}
+	buf->bytes = size;
+
+	return 0;
+}
+
+
+static const struct snd_pcm_ops cygnus_pcm_ops = {
+	.open		= cygnus_pcm_open,
+	.close		= cygnus_pcm_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= cygnus_pcm_hw_params,
+	.hw_free	= cygnus_pcm_hw_free,
+	.prepare	= cygnus_pcm_prepare,
+	.trigger	= cygnus_pcm_trigger,
+	.pointer	= cygnus_pcm_pointer,
+};
+
+static void cygnus_dma_free_dma_buffers(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+
+	substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+	if (substream) {
+		buf = &substream->dma_buffer;
+		if (buf->area) {
+			dma_free_coherent(pcm->card->dev, buf->bytes,
+				buf->area, buf->addr);
+			buf->area = NULL;
+		}
+	}
+
+	substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
+	if (substream) {
+		buf = &substream->dma_buffer;
+		if (buf->area) {
+			dma_free_coherent(pcm->card->dev, buf->bytes,
+				buf->area, buf->addr);
+			buf->area = NULL;
+		}
+	}
+}
+
+static int cygnus_dma_new(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_card *card = rtd->card->snd_card;
+	struct snd_pcm *pcm = rtd->pcm;
+	int ret;
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &cygnus_dma_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+	if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+		ret = cygnus_pcm_preallocate_dma_buffer(pcm,
+				SNDRV_PCM_STREAM_PLAYBACK);
+		if (ret)
+			return ret;
+	}
+
+	if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
+		ret = cygnus_pcm_preallocate_dma_buffer(pcm,
+				SNDRV_PCM_STREAM_CAPTURE);
+		if (ret) {
+			cygnus_dma_free_dma_buffers(pcm);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct snd_soc_component_driver cygnus_soc_platform = {
+	.ops		= &cygnus_pcm_ops,
+	.pcm_new	= cygnus_dma_new,
+	.pcm_free	= cygnus_dma_free_dma_buffers,
+};
+
+int cygnus_soc_platform_register(struct device *dev,
+				 struct cygnus_audio *cygaud)
+{
+	int rc = 0;
+
+	dev_dbg(dev, "%s Enter\n", __func__);
+
+	rc = devm_request_irq(dev, cygaud->irq_num, cygnus_dma_irq,
+				IRQF_SHARED, "cygnus-audio", cygaud);
+	if (rc) {
+		dev_err(dev, "%s request_irq error %d\n", __func__, rc);
+		return rc;
+	}
+
+	rc = devm_snd_soc_register_component(dev, &cygnus_soc_platform,
+					     NULL, 0);
+	if (rc) {
+		dev_err(dev, "%s failed\n", __func__);
+		return rc;
+	}
+
+	return 0;
+}
+
+int cygnus_soc_platform_unregister(struct device *dev)
+{
+	return 0;
+}
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("Cygnus ASoC PCM module");
diff --git a/sound/soc/bcm/cygnus-ssp.c b/sound/soc/bcm/cygnus-ssp.c
new file mode 100644
index 000000000..b733f1446
--- /dev/null
+++ b/sound/soc/bcm/cygnus-ssp.c
@@ -0,0 +1,1398 @@
+/*
+ * Copyright (C) 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "cygnus-ssp.h"
+
+#define DEFAULT_VCO    1354750204
+
+#define CAPTURE_FCI_ID_BASE 0x180
+#define CYGNUS_SSP_TRISTATE_MASK 0x001fff
+#define CYGNUS_PLLCLKSEL_MASK 0xf
+
+/* Used with stream_on field to indicate which streams are active */
+#define  PLAYBACK_STREAM_MASK   BIT(0)
+#define  CAPTURE_STREAM_MASK    BIT(1)
+
+#define I2S_STREAM_CFG_MASK      0xff003ff
+#define I2S_CAP_STREAM_CFG_MASK  0xf0
+#define SPDIF_STREAM_CFG_MASK    0x3ff
+#define CH_GRP_STEREO            0x1
+
+/* Begin register offset defines */
+#define AUD_MISC_SEROUT_OE_REG_BASE  0x01c
+#define AUD_MISC_SEROUT_SPDIF_OE  12
+#define AUD_MISC_SEROUT_MCLK_OE   3
+#define AUD_MISC_SEROUT_LRCK_OE   2
+#define AUD_MISC_SEROUT_SCLK_OE   1
+#define AUD_MISC_SEROUT_SDAT_OE   0
+
+/* AUD_FMM_BF_CTRL_xxx regs */
+#define BF_DST_CFG0_OFFSET  0x100
+#define BF_DST_CFG1_OFFSET  0x104
+#define BF_DST_CFG2_OFFSET  0x108
+
+#define BF_DST_CTRL0_OFFSET 0x130
+#define BF_DST_CTRL1_OFFSET 0x134
+#define BF_DST_CTRL2_OFFSET 0x138
+
+#define BF_SRC_CFG0_OFFSET  0x148
+#define BF_SRC_CFG1_OFFSET  0x14c
+#define BF_SRC_CFG2_OFFSET  0x150
+#define BF_SRC_CFG3_OFFSET  0x154
+
+#define BF_SRC_CTRL0_OFFSET 0x1c0
+#define BF_SRC_CTRL1_OFFSET 0x1c4
+#define BF_SRC_CTRL2_OFFSET 0x1c8
+#define BF_SRC_CTRL3_OFFSET 0x1cc
+
+#define BF_SRC_GRP0_OFFSET  0x1fc
+#define BF_SRC_GRP1_OFFSET  0x200
+#define BF_SRC_GRP2_OFFSET  0x204
+#define BF_SRC_GRP3_OFFSET  0x208
+
+#define BF_SRC_GRP_EN_OFFSET        0x320
+#define BF_SRC_GRP_FLOWON_OFFSET    0x324
+#define BF_SRC_GRP_SYNC_DIS_OFFSET  0x328
+
+/* AUD_FMM_IOP_OUT_I2S_xxx regs */
+#define OUT_I2S_0_STREAM_CFG_OFFSET 0xa00
+#define OUT_I2S_0_CFG_OFFSET        0xa04
+#define OUT_I2S_0_MCLK_CFG_OFFSET   0xa0c
+
+#define OUT_I2S_1_STREAM_CFG_OFFSET 0xa40
+#define OUT_I2S_1_CFG_OFFSET        0xa44
+#define OUT_I2S_1_MCLK_CFG_OFFSET   0xa4c
+
+#define OUT_I2S_2_STREAM_CFG_OFFSET 0xa80
+#define OUT_I2S_2_CFG_OFFSET        0xa84
+#define OUT_I2S_2_MCLK_CFG_OFFSET   0xa8c
+
+/* AUD_FMM_IOP_OUT_SPDIF_xxx regs */
+#define SPDIF_STREAM_CFG_OFFSET  0xac0
+#define SPDIF_CTRL_OFFSET        0xac4
+#define SPDIF_FORMAT_CFG_OFFSET  0xad8
+#define SPDIF_MCLK_CFG_OFFSET    0xadc
+
+/* AUD_FMM_IOP_PLL_0_xxx regs */
+#define IOP_PLL_0_MACRO_OFFSET    0xb00
+#define IOP_PLL_0_MDIV_Ch0_OFFSET 0xb14
+#define IOP_PLL_0_MDIV_Ch1_OFFSET 0xb18
+#define IOP_PLL_0_MDIV_Ch2_OFFSET 0xb1c
+
+#define IOP_PLL_0_ACTIVE_MDIV_Ch0_OFFSET 0xb30
+#define IOP_PLL_0_ACTIVE_MDIV_Ch1_OFFSET 0xb34
+#define IOP_PLL_0_ACTIVE_MDIV_Ch2_OFFSET 0xb38
+
+/* AUD_FMM_IOP_xxx regs */
+#define IOP_PLL_0_CONTROL_OFFSET     0xb04
+#define IOP_PLL_0_USER_NDIV_OFFSET   0xb08
+#define IOP_PLL_0_ACTIVE_NDIV_OFFSET 0xb20
+#define IOP_PLL_0_RESET_OFFSET       0xb5c
+
+/* AUD_FMM_IOP_IN_I2S_xxx regs */
+#define IN_I2S_0_STREAM_CFG_OFFSET 0x00
+#define IN_I2S_0_CFG_OFFSET        0x04
+#define IN_I2S_1_STREAM_CFG_OFFSET 0x40
+#define IN_I2S_1_CFG_OFFSET        0x44
+#define IN_I2S_2_STREAM_CFG_OFFSET 0x80
+#define IN_I2S_2_CFG_OFFSET        0x84
+
+/* AUD_FMM_IOP_MISC_xxx regs */
+#define IOP_SW_INIT_LOGIC          0x1c0
+
+/* End register offset defines */
+
+
+/* AUD_FMM_IOP_OUT_I2S_x_MCLK_CFG_0_REG */
+#define I2S_OUT_MCLKRATE_SHIFT 16
+
+/* AUD_FMM_IOP_OUT_I2S_x_MCLK_CFG_REG */
+#define I2S_OUT_PLLCLKSEL_SHIFT  0
+
+/* AUD_FMM_IOP_OUT_I2S_x_STREAM_CFG */
+#define I2S_OUT_STREAM_ENA  31
+#define I2S_OUT_STREAM_CFG_GROUP_ID  20
+#define I2S_OUT_STREAM_CFG_CHANNEL_GROUPING  24
+
+/* AUD_FMM_IOP_IN_I2S_x_CAP */
+#define I2S_IN_STREAM_CFG_CAP_ENA   31
+#define I2S_IN_STREAM_CFG_0_GROUP_ID 4
+
+/* AUD_FMM_IOP_OUT_I2S_x_I2S_CFG_REG */
+#define I2S_OUT_CFGX_CLK_ENA         0
+#define I2S_OUT_CFGX_DATA_ENABLE     1
+#define I2S_OUT_CFGX_DATA_ALIGNMENT  6
+#define I2S_OUT_CFGX_BITS_PER_SLOT  13
+#define I2S_OUT_CFGX_VALID_SLOT     14
+#define I2S_OUT_CFGX_FSYNC_WIDTH    18
+#define I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32 26
+#define I2S_OUT_CFGX_SLAVE_MODE     30
+#define I2S_OUT_CFGX_TDM_MODE       31
+
+/* AUD_FMM_BF_CTRL_SOURCECH_CFGx_REG */
+#define BF_SRC_CFGX_SFIFO_ENA              0
+#define BF_SRC_CFGX_BUFFER_PAIR_ENABLE     1
+#define BF_SRC_CFGX_SAMPLE_CH_MODE         2
+#define BF_SRC_CFGX_SFIFO_SZ_DOUBLE        5
+#define BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY  10
+#define BF_SRC_CFGX_BIT_RES               20
+#define BF_SRC_CFGX_PROCESS_SEQ_ID_VALID  31
+
+/* AUD_FMM_BF_CTRL_DESTCH_CFGx_REG */
+#define BF_DST_CFGX_CAP_ENA              0
+#define BF_DST_CFGX_BUFFER_PAIR_ENABLE   1
+#define BF_DST_CFGX_DFIFO_SZ_DOUBLE      2
+#define BF_DST_CFGX_NOT_PAUSE_WHEN_FULL 11
+#define BF_DST_CFGX_FCI_ID              12
+#define BF_DST_CFGX_CAP_MODE            24
+#define BF_DST_CFGX_PROC_SEQ_ID_VALID   31
+
+/* AUD_FMM_IOP_OUT_SPDIF_xxx */
+#define SPDIF_0_OUT_DITHER_ENA     3
+#define SPDIF_0_OUT_STREAM_ENA    31
+
+/* AUD_FMM_IOP_PLL_0_USER */
+#define IOP_PLL_0_USER_NDIV_FRAC   10
+
+/* AUD_FMM_IOP_PLL_0_ACTIVE */
+#define IOP_PLL_0_ACTIVE_NDIV_FRAC 10
+
+
+#define INIT_SSP_REGS(num) (struct cygnus_ssp_regs){ \
+		.i2s_stream_cfg = OUT_I2S_ ##num## _STREAM_CFG_OFFSET, \
+		.i2s_cap_stream_cfg = IN_I2S_ ##num## _STREAM_CFG_OFFSET, \
+		.i2s_cfg = OUT_I2S_ ##num## _CFG_OFFSET, \
+		.i2s_cap_cfg = IN_I2S_ ##num## _CFG_OFFSET, \
+		.i2s_mclk_cfg = OUT_I2S_ ##num## _MCLK_CFG_OFFSET, \
+		.bf_destch_ctrl = BF_DST_CTRL ##num## _OFFSET, \
+		.bf_destch_cfg = BF_DST_CFG ##num## _OFFSET, \
+		.bf_sourcech_ctrl = BF_SRC_CTRL ##num## _OFFSET, \
+		.bf_sourcech_cfg = BF_SRC_CFG ##num## _OFFSET, \
+		.bf_sourcech_grp = BF_SRC_GRP ##num## _OFFSET \
+}
+
+struct pll_macro_entry {
+	u32 mclk;
+	u32 pll_ch_num;
+};
+
+/*
+ * PLL has 3 output channels (1x, 2x, and 4x). Below are
+ * the common MCLK frequencies used by audio driver
+ */
+static const struct pll_macro_entry pll_predef_mclk[] = {
+	{ 4096000, 0},
+	{ 8192000, 1},
+	{16384000, 2},
+
+	{ 5644800, 0},
+	{11289600, 1},
+	{22579200, 2},
+
+	{ 6144000, 0},
+	{12288000, 1},
+	{24576000, 2},
+
+	{12288000, 0},
+	{24576000, 1},
+	{49152000, 2},
+
+	{22579200, 0},
+	{45158400, 1},
+	{90316800, 2},
+
+	{24576000, 0},
+	{49152000, 1},
+	{98304000, 2},
+};
+
+#define CYGNUS_RATE_MIN     8000
+#define CYGNUS_RATE_MAX   384000
+
+/* List of valid frame sizes for tdm mode */
+static const int ssp_valid_tdm_framesize[] = {32, 64, 128, 256, 512};
+
+static const unsigned int cygnus_rates[] = {
+	 8000, 11025,  16000,  22050,  32000,  44100, 48000,
+	88200, 96000, 176400, 192000, 352800, 384000
+};
+
+static const struct snd_pcm_hw_constraint_list cygnus_rate_constraint = {
+	.count = ARRAY_SIZE(cygnus_rates),
+	.list = cygnus_rates,
+};
+
+static struct cygnus_aio_port *cygnus_dai_get_portinfo(struct snd_soc_dai *dai)
+{
+	struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai);
+
+	return &cygaud->portinfo[dai->id];
+}
+
+static int audio_ssp_init_portregs(struct cygnus_aio_port *aio)
+{
+	u32 value, fci_id;
+	int status = 0;
+
+	switch (aio->port_type) {
+	case PORT_TDM:
+		value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg);
+		value &= ~I2S_STREAM_CFG_MASK;
+
+		/* Set Group ID */
+		writel(aio->portnum,
+			aio->cygaud->audio + aio->regs.bf_sourcech_grp);
+
+		/* Configure the AUD_FMM_IOP_OUT_I2S_x_STREAM_CFG reg */
+		value |= aio->portnum << I2S_OUT_STREAM_CFG_GROUP_ID;
+		value |= aio->portnum; /* FCI ID is the port num */
+		value |= CH_GRP_STEREO << I2S_OUT_STREAM_CFG_CHANNEL_GROUPING;
+		writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg);
+
+		/* Configure the AUD_FMM_BF_CTRL_SOURCECH_CFGX reg */
+		value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+		value &= ~BIT(BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY);
+		value |= BIT(BF_SRC_CFGX_SFIFO_SZ_DOUBLE);
+		value |= BIT(BF_SRC_CFGX_PROCESS_SEQ_ID_VALID);
+		writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+
+		/* Configure the AUD_FMM_IOP_IN_I2S_x_CAP_STREAM_CFG_0 reg */
+		value = readl(aio->cygaud->i2s_in +
+			aio->regs.i2s_cap_stream_cfg);
+		value &= ~I2S_CAP_STREAM_CFG_MASK;
+		value |= aio->portnum << I2S_IN_STREAM_CFG_0_GROUP_ID;
+		writel(value, aio->cygaud->i2s_in +
+			aio->regs.i2s_cap_stream_cfg);
+
+		/* Configure the AUD_FMM_BF_CTRL_DESTCH_CFGX_REG_BASE reg */
+		fci_id = CAPTURE_FCI_ID_BASE + aio->portnum;
+
+		value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg);
+		value |= BIT(BF_DST_CFGX_DFIFO_SZ_DOUBLE);
+		value &= ~BIT(BF_DST_CFGX_NOT_PAUSE_WHEN_FULL);
+		value |= (fci_id << BF_DST_CFGX_FCI_ID);
+		value |= BIT(BF_DST_CFGX_PROC_SEQ_ID_VALID);
+		writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg);
+
+		/* Enable the transmit pin for this port */
+		value = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE);
+		value &= ~BIT((aio->portnum * 4) + AUD_MISC_SEROUT_SDAT_OE);
+		writel(value, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE);
+		break;
+	case PORT_SPDIF:
+		writel(aio->portnum, aio->cygaud->audio + BF_SRC_GRP3_OFFSET);
+
+		value = readl(aio->cygaud->audio + SPDIF_CTRL_OFFSET);
+		value |= BIT(SPDIF_0_OUT_DITHER_ENA);
+		writel(value, aio->cygaud->audio + SPDIF_CTRL_OFFSET);
+
+		/* Enable and set the FCI ID for the SPDIF channel */
+		value = readl(aio->cygaud->audio + SPDIF_STREAM_CFG_OFFSET);
+		value &= ~SPDIF_STREAM_CFG_MASK;
+		value |= aio->portnum; /* FCI ID is the port num */
+		value |= BIT(SPDIF_0_OUT_STREAM_ENA);
+		writel(value, aio->cygaud->audio + SPDIF_STREAM_CFG_OFFSET);
+
+		value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+		value &= ~BIT(BF_SRC_CFGX_NOT_PAUSE_WHEN_EMPTY);
+		value |= BIT(BF_SRC_CFGX_SFIFO_SZ_DOUBLE);
+		value |= BIT(BF_SRC_CFGX_PROCESS_SEQ_ID_VALID);
+		writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+
+		/* Enable the spdif output pin */
+		value = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE);
+		value &= ~BIT(AUD_MISC_SEROUT_SPDIF_OE);
+		writel(value, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE);
+		break;
+	default:
+		dev_err(aio->cygaud->dev, "Port not supported\n");
+		status = -EINVAL;
+	}
+
+	return status;
+}
+
+static void audio_ssp_in_enable(struct cygnus_aio_port *aio)
+{
+	u32 value;
+
+	value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg);
+	value |= BIT(BF_DST_CFGX_CAP_ENA);
+	writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg);
+
+	writel(0x1, aio->cygaud->audio + aio->regs.bf_destch_ctrl);
+
+	value = readl(aio->cygaud->audio + aio->regs.i2s_cfg);
+	value |= BIT(I2S_OUT_CFGX_CLK_ENA);
+	value |= BIT(I2S_OUT_CFGX_DATA_ENABLE);
+	writel(value, aio->cygaud->audio + aio->regs.i2s_cfg);
+
+	value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg);
+	value |= BIT(I2S_IN_STREAM_CFG_CAP_ENA);
+	writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg);
+
+	aio->streams_on |= CAPTURE_STREAM_MASK;
+}
+
+static void audio_ssp_in_disable(struct cygnus_aio_port *aio)
+{
+	u32 value;
+
+	value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg);
+	value &= ~BIT(I2S_IN_STREAM_CFG_CAP_ENA);
+	writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_stream_cfg);
+
+	aio->streams_on &= ~CAPTURE_STREAM_MASK;
+
+	/* If both playback and capture are off */
+	if (!aio->streams_on) {
+		value = readl(aio->cygaud->audio + aio->regs.i2s_cfg);
+		value &= ~BIT(I2S_OUT_CFGX_CLK_ENA);
+		value &= ~BIT(I2S_OUT_CFGX_DATA_ENABLE);
+		writel(value, aio->cygaud->audio + aio->regs.i2s_cfg);
+	}
+
+	writel(0x0, aio->cygaud->audio + aio->regs.bf_destch_ctrl);
+
+	value = readl(aio->cygaud->audio + aio->regs.bf_destch_cfg);
+	value &= ~BIT(BF_DST_CFGX_CAP_ENA);
+	writel(value, aio->cygaud->audio + aio->regs.bf_destch_cfg);
+}
+
+static int audio_ssp_out_enable(struct cygnus_aio_port *aio)
+{
+	u32 value;
+	int status = 0;
+
+	switch (aio->port_type) {
+	case PORT_TDM:
+		value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg);
+		value |= BIT(I2S_OUT_STREAM_ENA);
+		writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg);
+
+		writel(1, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl);
+
+		value = readl(aio->cygaud->audio + aio->regs.i2s_cfg);
+		value |= BIT(I2S_OUT_CFGX_CLK_ENA);
+		value |= BIT(I2S_OUT_CFGX_DATA_ENABLE);
+		writel(value, aio->cygaud->audio + aio->regs.i2s_cfg);
+
+		value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+		value |= BIT(BF_SRC_CFGX_SFIFO_ENA);
+		writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+
+		aio->streams_on |= PLAYBACK_STREAM_MASK;
+		break;
+	case PORT_SPDIF:
+		value = readl(aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET);
+		value |= 0x3;
+		writel(value, aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET);
+
+		writel(1, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl);
+
+		value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+		value |= BIT(BF_SRC_CFGX_SFIFO_ENA);
+		writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+		break;
+	default:
+		dev_err(aio->cygaud->dev,
+			"Port not supported %d\n", aio->portnum);
+		status = -EINVAL;
+	}
+
+	return status;
+}
+
+static int audio_ssp_out_disable(struct cygnus_aio_port *aio)
+{
+	u32 value;
+	int status = 0;
+
+	switch (aio->port_type) {
+	case PORT_TDM:
+		aio->streams_on &= ~PLAYBACK_STREAM_MASK;
+
+		/* If both playback and capture are off */
+		if (!aio->streams_on) {
+			value = readl(aio->cygaud->audio + aio->regs.i2s_cfg);
+			value &= ~BIT(I2S_OUT_CFGX_CLK_ENA);
+			value &= ~BIT(I2S_OUT_CFGX_DATA_ENABLE);
+			writel(value, aio->cygaud->audio + aio->regs.i2s_cfg);
+		}
+
+		/* set group_sync_dis = 1 */
+		value = readl(aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET);
+		value |= BIT(aio->portnum);
+		writel(value, aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET);
+
+		writel(0, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl);
+
+		value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+		value &= ~BIT(BF_SRC_CFGX_SFIFO_ENA);
+		writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+
+		/* set group_sync_dis = 0 */
+		value = readl(aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET);
+		value &= ~BIT(aio->portnum);
+		writel(value, aio->cygaud->audio + BF_SRC_GRP_SYNC_DIS_OFFSET);
+
+		value = readl(aio->cygaud->audio + aio->regs.i2s_stream_cfg);
+		value &= ~BIT(I2S_OUT_STREAM_ENA);
+		writel(value, aio->cygaud->audio + aio->regs.i2s_stream_cfg);
+
+		/* IOP SW INIT on OUT_I2S_x */
+		value = readl(aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC);
+		value |= BIT(aio->portnum);
+		writel(value, aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC);
+		value &= ~BIT(aio->portnum);
+		writel(value, aio->cygaud->i2s_in + IOP_SW_INIT_LOGIC);
+		break;
+	case PORT_SPDIF:
+		value = readl(aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET);
+		value &= ~0x3;
+		writel(value, aio->cygaud->audio + SPDIF_FORMAT_CFG_OFFSET);
+		writel(0, aio->cygaud->audio + aio->regs.bf_sourcech_ctrl);
+
+		value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+		value &= ~BIT(BF_SRC_CFGX_SFIFO_ENA);
+		writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+		break;
+	default:
+		dev_err(aio->cygaud->dev,
+			"Port not supported %d\n", aio->portnum);
+		status = -EINVAL;
+	}
+
+	return status;
+}
+
+static int pll_configure_mclk(struct cygnus_audio *cygaud, u32 mclk,
+	struct cygnus_aio_port *aio)
+{
+	int i = 0, error;
+	bool found = false;
+	const struct pll_macro_entry *p_entry;
+	struct clk *ch_clk;
+
+	for (i = 0; i < ARRAY_SIZE(pll_predef_mclk); i++) {
+		p_entry = &pll_predef_mclk[i];
+		if (p_entry->mclk == mclk) {
+			found = true;
+			break;
+		}
+	}
+	if (!found) {
+		dev_err(cygaud->dev,
+			"%s No valid mclk freq (%u) found!\n", __func__, mclk);
+		return -EINVAL;
+	}
+
+	ch_clk = cygaud->audio_clk[p_entry->pll_ch_num];
+
+	if ((aio->clk_trace.cap_en) && (!aio->clk_trace.cap_clk_en)) {
+		error = clk_prepare_enable(ch_clk);
+		if (error) {
+			dev_err(cygaud->dev, "%s clk_prepare_enable failed %d\n",
+				__func__, error);
+			return error;
+		}
+		aio->clk_trace.cap_clk_en = true;
+	}
+
+	if ((aio->clk_trace.play_en) && (!aio->clk_trace.play_clk_en)) {
+		error = clk_prepare_enable(ch_clk);
+		if (error) {
+			dev_err(cygaud->dev, "%s clk_prepare_enable failed %d\n",
+				__func__, error);
+			return error;
+		}
+		aio->clk_trace.play_clk_en = true;
+	}
+
+	error = clk_set_rate(ch_clk, mclk);
+	if (error) {
+		dev_err(cygaud->dev, "%s Set MCLK rate failed: %d\n",
+			__func__, error);
+		return error;
+	}
+
+	return p_entry->pll_ch_num;
+}
+
+static int cygnus_ssp_set_clocks(struct cygnus_aio_port *aio)
+{
+	u32 value;
+	u32 mask = 0xf;
+	u32 sclk;
+	u32 mclk_rate;
+	unsigned int bit_rate;
+	unsigned int ratio;
+
+	bit_rate = aio->bit_per_frame * aio->lrclk;
+
+	/*
+	 * Check if the bit clock can be generated from the given MCLK.
+	 * MCLK must be a perfect multiple of bit clock and must be one of the
+	 * following values... (2,4,6,8,10,12,14)
+	 */
+	if ((aio->mclk % bit_rate) != 0)
+		return -EINVAL;
+
+	ratio = aio->mclk / bit_rate;
+	switch (ratio) {
+	case 2:
+	case 4:
+	case 6:
+	case 8:
+	case 10:
+	case 12:
+	case 14:
+		mclk_rate = ratio / 2;
+		break;
+
+	default:
+		dev_err(aio->cygaud->dev,
+			"Invalid combination of MCLK and BCLK\n");
+		dev_err(aio->cygaud->dev, "lrclk = %u, bits/frame = %u, mclk = %u\n",
+			aio->lrclk, aio->bit_per_frame, aio->mclk);
+		return -EINVAL;
+	}
+
+	/* Set sclk rate */
+	switch (aio->port_type) {
+	case PORT_TDM:
+		sclk = aio->bit_per_frame;
+		if (sclk == 512)
+			sclk = 0;
+
+		/* sclks_per_1fs_div = sclk cycles/32 */
+		sclk /= 32;
+
+		/* Set number of bitclks per frame */
+		value = readl(aio->cygaud->audio + aio->regs.i2s_cfg);
+		value &= ~(mask << I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32);
+		value |= sclk << I2S_OUT_CFGX_SCLKS_PER_1FS_DIV32;
+		writel(value, aio->cygaud->audio + aio->regs.i2s_cfg);
+		dev_dbg(aio->cygaud->dev,
+			"SCLKS_PER_1FS_DIV32 = 0x%x\n", value);
+		break;
+	case PORT_SPDIF:
+		break;
+	default:
+		dev_err(aio->cygaud->dev, "Unknown port type\n");
+		return -EINVAL;
+	}
+
+	/* Set MCLK_RATE ssp port (spdif and ssp are the same) */
+	value = readl(aio->cygaud->audio + aio->regs.i2s_mclk_cfg);
+	value &= ~(0xf << I2S_OUT_MCLKRATE_SHIFT);
+	value |= (mclk_rate << I2S_OUT_MCLKRATE_SHIFT);
+	writel(value, aio->cygaud->audio + aio->regs.i2s_mclk_cfg);
+
+	dev_dbg(aio->cygaud->dev, "mclk cfg reg = 0x%x\n", value);
+	dev_dbg(aio->cygaud->dev, "bits per frame = %u, mclk = %u Hz, lrclk = %u Hz\n",
+			aio->bit_per_frame, aio->mclk, aio->lrclk);
+	return 0;
+}
+
+static int cygnus_ssp_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *dai)
+{
+	struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai);
+	int rate, bitres;
+	u32 value;
+	u32 mask = 0x1f;
+	int ret = 0;
+
+	dev_dbg(aio->cygaud->dev, "%s port = %d\n", __func__, aio->portnum);
+	dev_dbg(aio->cygaud->dev, "params_channels %d\n",
+			params_channels(params));
+	dev_dbg(aio->cygaud->dev, "rate %d\n", params_rate(params));
+	dev_dbg(aio->cygaud->dev, "format %d\n", params_format(params));
+
+	rate = params_rate(params);
+
+	switch (aio->mode) {
+	case CYGNUS_SSPMODE_TDM:
+		if ((rate == 192000) && (params_channels(params) > 4)) {
+			dev_err(aio->cygaud->dev, "Cannot run %d channels at %dHz\n",
+				params_channels(params), rate);
+			return -EINVAL;
+		}
+		break;
+	case CYGNUS_SSPMODE_I2S:
+		aio->bit_per_frame = 64; /* I2S must be 64 bit per frame */
+		break;
+	default:
+		dev_err(aio->cygaud->dev,
+			"%s port running in unknown mode\n", __func__);
+		return -EINVAL;
+	}
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+		value &= ~BIT(BF_SRC_CFGX_BUFFER_PAIR_ENABLE);
+		value &= ~BIT(BF_SRC_CFGX_SAMPLE_CH_MODE);
+		writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+
+		switch (params_format(params)) {
+		case SNDRV_PCM_FORMAT_S16_LE:
+			bitres = 16;
+			break;
+
+		case SNDRV_PCM_FORMAT_S32_LE:
+			/* 32 bit mode is coded as 0 */
+			bitres = 0;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+		value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+		value &= ~(mask << BF_SRC_CFGX_BIT_RES);
+		value |= (bitres << BF_SRC_CFGX_BIT_RES);
+		writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
+
+	} else {
+
+		switch (params_format(params)) {
+		case SNDRV_PCM_FORMAT_S16_LE:
+			value = readl(aio->cygaud->audio +
+					aio->regs.bf_destch_cfg);
+			value |= BIT(BF_DST_CFGX_CAP_MODE);
+			writel(value, aio->cygaud->audio +
+					aio->regs.bf_destch_cfg);
+			break;
+
+		case SNDRV_PCM_FORMAT_S32_LE:
+			value = readl(aio->cygaud->audio +
+					aio->regs.bf_destch_cfg);
+			value &= ~BIT(BF_DST_CFGX_CAP_MODE);
+			writel(value, aio->cygaud->audio +
+					aio->regs.bf_destch_cfg);
+			break;
+
+		default:
+			return -EINVAL;
+		}
+	}
+
+	aio->lrclk = rate;
+
+	if (!aio->is_slave)
+		ret = cygnus_ssp_set_clocks(aio);
+
+	return ret;
+}
+
+/*
+ * This function sets the mclk frequency for pll clock
+ */
+static int cygnus_ssp_set_sysclk(struct snd_soc_dai *dai,
+			int clk_id, unsigned int freq, int dir)
+{
+	int sel;
+	u32 value;
+	struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai);
+	struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai);
+
+	dev_dbg(aio->cygaud->dev,
+		"%s Enter port = %d\n", __func__, aio->portnum);
+	sel = pll_configure_mclk(cygaud, freq, aio);
+	if (sel < 0) {
+		dev_err(aio->cygaud->dev,
+			"%s Setting mclk failed.\n", __func__);
+		return -EINVAL;
+	}
+
+	aio->mclk = freq;
+
+	dev_dbg(aio->cygaud->dev, "%s Setting MCLKSEL to %d\n", __func__, sel);
+	value = readl(aio->cygaud->audio + aio->regs.i2s_mclk_cfg);
+	value &= ~(0xf << I2S_OUT_PLLCLKSEL_SHIFT);
+	value |= (sel << I2S_OUT_PLLCLKSEL_SHIFT);
+	writel(value, aio->cygaud->audio + aio->regs.i2s_mclk_cfg);
+
+	return 0;
+}
+
+static int cygnus_ssp_startup(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai);
+
+	snd_soc_dai_set_dma_data(dai, substream, aio);
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		aio->clk_trace.play_en = true;
+	else
+		aio->clk_trace.cap_en = true;
+
+	substream->runtime->hw.rate_min = CYGNUS_RATE_MIN;
+	substream->runtime->hw.rate_max = CYGNUS_RATE_MAX;
+
+	snd_pcm_hw_constraint_list(substream->runtime, 0,
+			SNDRV_PCM_HW_PARAM_RATE, &cygnus_rate_constraint);
+	return 0;
+}
+
+static void cygnus_ssp_shutdown(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		aio->clk_trace.play_en = false;
+	else
+		aio->clk_trace.cap_en = false;
+
+	if (!aio->is_slave) {
+		u32 val;
+
+		val = readl(aio->cygaud->audio + aio->regs.i2s_mclk_cfg);
+		val &= CYGNUS_PLLCLKSEL_MASK;
+		if (val >= ARRAY_SIZE(aio->cygaud->audio_clk)) {
+			dev_err(aio->cygaud->dev, "Clk index %u is out of bounds\n",
+				val);
+			return;
+		}
+
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			if (aio->clk_trace.play_clk_en) {
+				clk_disable_unprepare(aio->cygaud->
+						audio_clk[val]);
+				aio->clk_trace.play_clk_en = false;
+			}
+		} else {
+			if (aio->clk_trace.cap_clk_en) {
+				clk_disable_unprepare(aio->cygaud->
+						audio_clk[val]);
+				aio->clk_trace.cap_clk_en = false;
+			}
+		}
+	}
+}
+
+/*
+ * Bit    Update  Notes
+ * 31     Yes     TDM Mode        (1 = TDM, 0 = i2s)
+ * 30     Yes     Slave Mode	  (1 = Slave, 0 = Master)
+ * 29:26  No      Sclks per frame
+ * 25:18  Yes     FS Width
+ * 17:14  No      Valid Slots
+ * 13     No      Bits		  (1 = 16 bits, 0 = 32 bits)
+ * 12:08  No     Bits per samp
+ * 07     Yes     Justifcation    (1 = LSB, 0 = MSB)
+ * 06     Yes     Alignment       (1 = Delay 1 clk, 0 = no delay
+ * 05     Yes     SCLK polarity   (1 = Rising, 0 = Falling)
+ * 04     Yes     LRCLK Polarity  (1 = High for left, 0 = Low for left)
+ * 03:02  Yes     Reserved - write as zero
+ * 01     No      Data Enable
+ * 00     No      CLK Enable
+ */
+#define I2S_OUT_CFG_REG_UPDATE_MASK   0x3C03FF03
+
+/* Input cfg is same as output, but the FS width is not a valid field */
+#define I2S_IN_CFG_REG_UPDATE_MASK  (I2S_OUT_CFG_REG_UPDATE_MASK | 0x03FC0000)
+
+int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai, int len)
+{
+	struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai);
+
+	if ((len > 0) && (len < 256)) {
+		aio->fsync_width = len;
+		return 0;
+	} else {
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL_GPL(cygnus_ssp_set_custom_fsync_width);
+
+static int cygnus_ssp_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
+{
+	struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai);
+	u32 ssp_curcfg;
+	u32 ssp_newcfg;
+	u32 ssp_outcfg;
+	u32 ssp_incfg;
+	u32 val;
+	u32 mask;
+
+	dev_dbg(aio->cygaud->dev, "%s Enter  fmt: %x\n", __func__, fmt);
+
+	if (aio->port_type == PORT_SPDIF)
+		return -EINVAL;
+
+	ssp_newcfg = 0;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		ssp_newcfg |= BIT(I2S_OUT_CFGX_SLAVE_MODE);
+		aio->is_slave = 1;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		ssp_newcfg &= ~BIT(I2S_OUT_CFGX_SLAVE_MODE);
+		aio->is_slave = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		ssp_newcfg |= BIT(I2S_OUT_CFGX_DATA_ALIGNMENT);
+		ssp_newcfg |= BIT(I2S_OUT_CFGX_FSYNC_WIDTH);
+		aio->mode = CYGNUS_SSPMODE_I2S;
+		break;
+
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		ssp_newcfg |= BIT(I2S_OUT_CFGX_TDM_MODE);
+
+		/* DSP_A = data after FS, DSP_B = data during FS */
+		if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_DSP_A)
+			ssp_newcfg |= BIT(I2S_OUT_CFGX_DATA_ALIGNMENT);
+
+		if ((aio->fsync_width > 0) && (aio->fsync_width < 256))
+			ssp_newcfg |=
+				(aio->fsync_width << I2S_OUT_CFGX_FSYNC_WIDTH);
+		else
+			ssp_newcfg |= BIT(I2S_OUT_CFGX_FSYNC_WIDTH);
+
+		aio->mode = CYGNUS_SSPMODE_TDM;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * SSP out cfg.
+	 * Retain bits we do not want to update, then OR in new bits
+	 */
+	ssp_curcfg = readl(aio->cygaud->audio + aio->regs.i2s_cfg);
+	ssp_outcfg = (ssp_curcfg & I2S_OUT_CFG_REG_UPDATE_MASK) | ssp_newcfg;
+	writel(ssp_outcfg, aio->cygaud->audio + aio->regs.i2s_cfg);
+
+	/*
+	 * SSP in cfg.
+	 * Retain bits we do not want to update, then OR in new bits
+	 */
+	ssp_curcfg = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg);
+	ssp_incfg = (ssp_curcfg & I2S_IN_CFG_REG_UPDATE_MASK) | ssp_newcfg;
+	writel(ssp_incfg, aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg);
+
+	val = readl(aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE);
+
+	/*
+	 * Configure the word clk and bit clk as output or tristate
+	 * Each port has 4 bits for controlling its pins.
+	 * Shift the mask based upon port number.
+	 */
+	mask = BIT(AUD_MISC_SEROUT_LRCK_OE)
+			| BIT(AUD_MISC_SEROUT_SCLK_OE)
+			| BIT(AUD_MISC_SEROUT_MCLK_OE);
+	mask = mask << (aio->portnum * 4);
+	if (aio->is_slave)
+		/* Set bit for tri-state */
+		val |= mask;
+	else
+		/* Clear bit for drive */
+		val &= ~mask;
+
+	dev_dbg(aio->cygaud->dev, "%s  Set OE bits 0x%x\n", __func__, val);
+	writel(val, aio->cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE);
+
+	return 0;
+}
+
+static int cygnus_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(dai);
+	struct cygnus_audio *cygaud = snd_soc_dai_get_drvdata(dai);
+
+	dev_dbg(aio->cygaud->dev,
+		"%s cmd %d at port = %d\n", __func__, cmd, aio->portnum);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			audio_ssp_out_enable(aio);
+		else
+			audio_ssp_in_enable(aio);
+		cygaud->active_ports++;
+
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			audio_ssp_out_disable(aio);
+		else
+			audio_ssp_in_disable(aio);
+		cygaud->active_ports--;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cygnus_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
+	unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
+{
+	struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai);
+	u32 value;
+	int bits_per_slot = 0;     /* default to 32-bits per slot */
+	int frame_bits;
+	unsigned int active_slots;
+	bool found = false;
+	int i;
+
+	if (tx_mask != rx_mask) {
+		dev_err(aio->cygaud->dev,
+			"%s tx_mask must equal rx_mask\n", __func__);
+		return -EINVAL;
+	}
+
+	active_slots = hweight32(tx_mask);
+
+	if (active_slots > 16)
+		return -EINVAL;
+
+	/* Slot value must be even */
+	if (active_slots % 2)
+		return -EINVAL;
+
+	/* We encode 16 slots as 0 in the reg */
+	if (active_slots == 16)
+		active_slots = 0;
+
+	/* Slot Width is either 16 or 32 */
+	switch (slot_width) {
+	case 16:
+		bits_per_slot = 1;
+		break;
+	case 32:
+		bits_per_slot = 0;
+		break;
+	default:
+		bits_per_slot = 0;
+		dev_warn(aio->cygaud->dev,
+			"%s Defaulting Slot Width to 32\n", __func__);
+	}
+
+	frame_bits = slots * slot_width;
+
+	for (i = 0; i < ARRAY_SIZE(ssp_valid_tdm_framesize); i++) {
+		if (ssp_valid_tdm_framesize[i] == frame_bits) {
+			found = true;
+			break;
+		}
+	}
+
+	if (!found) {
+		dev_err(aio->cygaud->dev,
+			"%s In TDM mode, frame bits INVALID (%d)\n",
+			__func__, frame_bits);
+		return -EINVAL;
+	}
+
+	aio->bit_per_frame = frame_bits;
+
+	dev_dbg(aio->cygaud->dev, "%s active_slots %u, bits per frame %d\n",
+			__func__, active_slots, frame_bits);
+
+	/* Set capture side of ssp port */
+	value = readl(aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg);
+	value &= ~(0xf << I2S_OUT_CFGX_VALID_SLOT);
+	value |= (active_slots << I2S_OUT_CFGX_VALID_SLOT);
+	value &= ~BIT(I2S_OUT_CFGX_BITS_PER_SLOT);
+	value |= (bits_per_slot << I2S_OUT_CFGX_BITS_PER_SLOT);
+	writel(value, aio->cygaud->i2s_in + aio->regs.i2s_cap_cfg);
+
+	/* Set playback side of ssp port */
+	value = readl(aio->cygaud->audio + aio->regs.i2s_cfg);
+	value &= ~(0xf << I2S_OUT_CFGX_VALID_SLOT);
+	value |= (active_slots << I2S_OUT_CFGX_VALID_SLOT);
+	value &= ~BIT(I2S_OUT_CFGX_BITS_PER_SLOT);
+	value |= (bits_per_slot << I2S_OUT_CFGX_BITS_PER_SLOT);
+	writel(value, aio->cygaud->audio + aio->regs.i2s_cfg);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cygnus_ssp_suspend(struct snd_soc_dai *cpu_dai)
+{
+	struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai);
+
+	if (!aio->is_slave) {
+		u32 val;
+
+		val = readl(aio->cygaud->audio + aio->regs.i2s_mclk_cfg);
+		val &= CYGNUS_PLLCLKSEL_MASK;
+		if (val >= ARRAY_SIZE(aio->cygaud->audio_clk)) {
+			dev_err(aio->cygaud->dev, "Clk index %u is out of bounds\n",
+				val);
+			return -EINVAL;
+		}
+
+		if (aio->clk_trace.cap_clk_en)
+			clk_disable_unprepare(aio->cygaud->audio_clk[val]);
+		if (aio->clk_trace.play_clk_en)
+			clk_disable_unprepare(aio->cygaud->audio_clk[val]);
+
+		aio->pll_clk_num = val;
+	}
+
+	return 0;
+}
+
+static int cygnus_ssp_resume(struct snd_soc_dai *cpu_dai)
+{
+	struct cygnus_aio_port *aio = cygnus_dai_get_portinfo(cpu_dai);
+	int error;
+
+	if (!aio->is_slave) {
+		if (aio->clk_trace.cap_clk_en) {
+			error = clk_prepare_enable(aio->cygaud->
+					audio_clk[aio->pll_clk_num]);
+			if (error) {
+				dev_err(aio->cygaud->dev, "%s clk_prepare_enable failed\n",
+					__func__);
+				return -EINVAL;
+			}
+		}
+		if (aio->clk_trace.play_clk_en) {
+			error = clk_prepare_enable(aio->cygaud->
+					audio_clk[aio->pll_clk_num]);
+			if (error) {
+				if (aio->clk_trace.cap_clk_en)
+					clk_disable_unprepare(aio->cygaud->
+						audio_clk[aio->pll_clk_num]);
+				dev_err(aio->cygaud->dev, "%s clk_prepare_enable failed\n",
+					__func__);
+				return -EINVAL;
+			}
+		}
+	}
+
+	return 0;
+}
+#else
+#define cygnus_ssp_suspend NULL
+#define cygnus_ssp_resume  NULL
+#endif
+
+static const struct snd_soc_dai_ops cygnus_ssp_dai_ops = {
+	.startup	= cygnus_ssp_startup,
+	.shutdown	= cygnus_ssp_shutdown,
+	.trigger	= cygnus_ssp_trigger,
+	.hw_params	= cygnus_ssp_hw_params,
+	.set_fmt	= cygnus_ssp_set_fmt,
+	.set_sysclk	= cygnus_ssp_set_sysclk,
+	.set_tdm_slot	= cygnus_set_dai_tdm_slot,
+};
+
+static const struct snd_soc_dai_ops cygnus_spdif_dai_ops = {
+	.startup	= cygnus_ssp_startup,
+	.shutdown	= cygnus_ssp_shutdown,
+	.trigger	= cygnus_ssp_trigger,
+	.hw_params	= cygnus_ssp_hw_params,
+	.set_sysclk	= cygnus_ssp_set_sysclk,
+};
+
+#define INIT_CPU_DAI(num) { \
+	.name = "cygnus-ssp" #num, \
+	.playback = { \
+		.channels_min = 2, \
+		.channels_max = 16, \
+		.rates = SNDRV_PCM_RATE_KNOT, \
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | \
+				SNDRV_PCM_FMTBIT_S32_LE, \
+	}, \
+	.capture = { \
+		.channels_min = 2, \
+		.channels_max = 16, \
+		.rates = SNDRV_PCM_RATE_KNOT, \
+		.formats =  SNDRV_PCM_FMTBIT_S16_LE | \
+				SNDRV_PCM_FMTBIT_S32_LE, \
+	}, \
+	.ops = &cygnus_ssp_dai_ops, \
+	.suspend = cygnus_ssp_suspend, \
+	.resume = cygnus_ssp_resume, \
+}
+
+static const struct snd_soc_dai_driver cygnus_ssp_dai_info[] = {
+	INIT_CPU_DAI(0),
+	INIT_CPU_DAI(1),
+	INIT_CPU_DAI(2),
+};
+
+static const struct snd_soc_dai_driver cygnus_spdif_dai_info = {
+	.name = "cygnus-spdif",
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_KNOT,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S32_LE,
+	},
+	.ops = &cygnus_spdif_dai_ops,
+	.suspend = cygnus_ssp_suspend,
+	.resume = cygnus_ssp_resume,
+};
+
+static struct snd_soc_dai_driver cygnus_ssp_dai[CYGNUS_MAX_PORTS];
+
+static const struct snd_soc_component_driver cygnus_ssp_component = {
+	.name		= "cygnus-audio",
+};
+
+/*
+ * Return < 0 if error
+ * Return 0 if disabled
+ * Return 1 if enabled and node is parsed successfully
+ */
+static int parse_ssp_child_node(struct platform_device *pdev,
+				struct device_node *dn,
+				struct cygnus_audio *cygaud,
+				struct snd_soc_dai_driver *p_dai)
+{
+	struct cygnus_aio_port *aio;
+	struct cygnus_ssp_regs ssp_regs[3];
+	u32 rawval;
+	int portnum = -1;
+	enum cygnus_audio_port_type port_type;
+
+	if (of_property_read_u32(dn, "reg", &rawval)) {
+		dev_err(&pdev->dev, "Missing reg property\n");
+		return -EINVAL;
+	}
+
+	portnum = rawval;
+	switch (rawval) {
+	case 0:
+		ssp_regs[0] = INIT_SSP_REGS(0);
+		port_type = PORT_TDM;
+		break;
+	case 1:
+		ssp_regs[1] = INIT_SSP_REGS(1);
+		port_type = PORT_TDM;
+		break;
+	case 2:
+		ssp_regs[2] = INIT_SSP_REGS(2);
+		port_type = PORT_TDM;
+		break;
+	case 3:
+		port_type = PORT_SPDIF;
+		break;
+	default:
+		dev_err(&pdev->dev, "Bad value for reg %u\n", rawval);
+		return -EINVAL;
+	}
+
+	aio = &cygaud->portinfo[portnum];
+	aio->cygaud = cygaud;
+	aio->portnum = portnum;
+	aio->port_type = port_type;
+	aio->fsync_width = -1;
+
+	switch (port_type) {
+	case PORT_TDM:
+		aio->regs = ssp_regs[portnum];
+		*p_dai = cygnus_ssp_dai_info[portnum];
+		aio->mode = CYGNUS_SSPMODE_UNKNOWN;
+		break;
+
+	case PORT_SPDIF:
+		aio->regs.bf_sourcech_cfg = BF_SRC_CFG3_OFFSET;
+		aio->regs.bf_sourcech_ctrl = BF_SRC_CTRL3_OFFSET;
+		aio->regs.i2s_mclk_cfg = SPDIF_MCLK_CFG_OFFSET;
+		aio->regs.i2s_stream_cfg = SPDIF_STREAM_CFG_OFFSET;
+		*p_dai = cygnus_spdif_dai_info;
+
+		/* For the purposes of this code SPDIF can be I2S mode */
+		aio->mode = CYGNUS_SSPMODE_I2S;
+		break;
+	default:
+		dev_err(&pdev->dev, "Bad value for port_type %d\n", port_type);
+		return -EINVAL;
+	}
+
+	dev_dbg(&pdev->dev, "%s portnum = %d\n", __func__, aio->portnum);
+	aio->streams_on = 0;
+	aio->cygaud->dev = &pdev->dev;
+	aio->clk_trace.play_en = false;
+	aio->clk_trace.cap_en = false;
+
+	audio_ssp_init_portregs(aio);
+	return 0;
+}
+
+static int audio_clk_init(struct platform_device *pdev,
+						struct cygnus_audio *cygaud)
+{
+	int i;
+	char clk_name[PROP_LEN_MAX];
+
+	for (i = 0; i < ARRAY_SIZE(cygaud->audio_clk); i++) {
+		snprintf(clk_name, PROP_LEN_MAX, "ch%d_audio", i);
+
+		cygaud->audio_clk[i] = devm_clk_get(&pdev->dev, clk_name);
+		if (IS_ERR(cygaud->audio_clk[i]))
+			return PTR_ERR(cygaud->audio_clk[i]);
+	}
+
+	return 0;
+}
+
+static int cygnus_ssp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *child_node;
+	struct resource *res;
+	struct cygnus_audio *cygaud;
+	int err = -EINVAL;
+	int node_count;
+	int active_port_count;
+
+	cygaud = devm_kzalloc(dev, sizeof(struct cygnus_audio), GFP_KERNEL);
+	if (!cygaud)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, cygaud);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "aud");
+	cygaud->audio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(cygaud->audio))
+		return PTR_ERR(cygaud->audio);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "i2s_in");
+	cygaud->i2s_in = devm_ioremap_resource(dev, res);
+	if (IS_ERR(cygaud->i2s_in))
+		return PTR_ERR(cygaud->i2s_in);
+
+	/* Tri-state all controlable pins until we know that we need them */
+	writel(CYGNUS_SSP_TRISTATE_MASK,
+			cygaud->audio + AUD_MISC_SEROUT_OE_REG_BASE);
+
+	node_count = of_get_child_count(pdev->dev.of_node);
+	if ((node_count < 1) || (node_count > CYGNUS_MAX_PORTS)) {
+		dev_err(dev, "child nodes is %d.  Must be between 1 and %d\n",
+			node_count, CYGNUS_MAX_PORTS);
+		return -EINVAL;
+	}
+
+	active_port_count = 0;
+
+	for_each_available_child_of_node(pdev->dev.of_node, child_node) {
+		err = parse_ssp_child_node(pdev, child_node, cygaud,
+					&cygnus_ssp_dai[active_port_count]);
+
+		/* negative is err, 0 is active and good, 1 is disabled */
+		if (err < 0)
+			return err;
+		else if (!err) {
+			dev_dbg(dev, "Activating DAI: %s\n",
+				cygnus_ssp_dai[active_port_count].name);
+			active_port_count++;
+		}
+	}
+
+	cygaud->dev = dev;
+	cygaud->active_ports = 0;
+
+	dev_dbg(dev, "Registering %d DAIs\n", active_port_count);
+	err = snd_soc_register_component(dev, &cygnus_ssp_component,
+				cygnus_ssp_dai, active_port_count);
+	if (err) {
+		dev_err(dev, "snd_soc_register_dai failed\n");
+		return err;
+	}
+
+	cygaud->irq_num = platform_get_irq(pdev, 0);
+	if (cygaud->irq_num <= 0) {
+		dev_err(dev, "platform_get_irq failed\n");
+		err = cygaud->irq_num;
+		goto err_irq;
+	}
+
+	err = audio_clk_init(pdev, cygaud);
+	if (err) {
+		dev_err(dev, "audio clock initialization failed\n");
+		goto err_irq;
+	}
+
+	err = cygnus_soc_platform_register(dev, cygaud);
+	if (err) {
+		dev_err(dev, "platform reg error %d\n", err);
+		goto err_irq;
+	}
+
+	return 0;
+
+err_irq:
+	snd_soc_unregister_component(dev);
+	return err;
+}
+
+static int cygnus_ssp_remove(struct platform_device *pdev)
+{
+	cygnus_soc_platform_unregister(&pdev->dev);
+	snd_soc_unregister_component(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id cygnus_ssp_of_match[] = {
+	{ .compatible = "brcm,cygnus-audio" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cygnus_ssp_of_match);
+
+static struct platform_driver cygnus_ssp_driver = {
+	.probe		= cygnus_ssp_probe,
+	.remove		= cygnus_ssp_remove,
+	.driver		= {
+		.name	= "cygnus-ssp",
+		.of_match_table = cygnus_ssp_of_match,
+	},
+};
+
+module_platform_driver(cygnus_ssp_driver);
+
+MODULE_ALIAS("platform:cygnus-ssp");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("Cygnus ASoC SSP Interface");
diff --git a/sound/soc/bcm/cygnus-ssp.h b/sound/soc/bcm/cygnus-ssp.h
new file mode 100644
index 000000000..33dd34305
--- /dev/null
+++ b/sound/soc/bcm/cygnus-ssp.h
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __CYGNUS_SSP_H__
+#define __CYGNUS_SSP_H__
+
+#define CYGNUS_TDM_DAI_MAX_SLOTS 16
+
+#define CYGNUS_MAX_PLAYBACK_PORTS 4
+#define CYGNUS_MAX_CAPTURE_PORTS 3
+#define CYGNUS_MAX_I2S_PORTS 3
+#define CYGNUS_MAX_PORTS  CYGNUS_MAX_PLAYBACK_PORTS
+#define CYGNUS_AUIDO_MAX_NUM_CLKS 3
+
+#define CYGNUS_SSP_FRAMEBITS_DIV 1
+
+#define CYGNUS_SSPMODE_I2S 0
+#define CYGNUS_SSPMODE_TDM 1
+#define CYGNUS_SSPMODE_UNKNOWN -1
+
+#define CYGNUS_SSP_CLKSRC_PLL      0
+
+/* Max string length of our dt property names */
+#define PROP_LEN_MAX 40
+
+struct ringbuf_regs {
+	unsigned rdaddr;
+	unsigned wraddr;
+	unsigned baseaddr;
+	unsigned endaddr;
+	unsigned fmark;   /* freemark for play, fullmark for caputure */
+	unsigned period_bytes;
+	unsigned buf_size;
+};
+
+#define RINGBUF_REG_PLAYBACK(num) ((struct ringbuf_regs) { \
+	.rdaddr = SRC_RBUF_ ##num## _RDADDR_OFFSET, \
+	.wraddr = SRC_RBUF_ ##num## _WRADDR_OFFSET, \
+	.baseaddr = SRC_RBUF_ ##num## _BASEADDR_OFFSET, \
+	.endaddr = SRC_RBUF_ ##num## _ENDADDR_OFFSET, \
+	.fmark = SRC_RBUF_ ##num## _FREE_MARK_OFFSET, \
+	.period_bytes = 0, \
+	.buf_size = 0, \
+})
+
+#define RINGBUF_REG_CAPTURE(num) ((struct ringbuf_regs)  { \
+	.rdaddr = DST_RBUF_ ##num## _RDADDR_OFFSET, \
+	.wraddr = DST_RBUF_ ##num## _WRADDR_OFFSET, \
+	.baseaddr = DST_RBUF_ ##num## _BASEADDR_OFFSET, \
+	.endaddr = DST_RBUF_ ##num## _ENDADDR_OFFSET, \
+	.fmark = DST_RBUF_ ##num## _FULL_MARK_OFFSET, \
+	.period_bytes = 0, \
+	.buf_size = 0, \
+})
+
+enum cygnus_audio_port_type {
+	PORT_TDM,
+	PORT_SPDIF,
+};
+
+struct cygnus_ssp_regs {
+	u32 i2s_stream_cfg;
+	u32 i2s_cfg;
+	u32 i2s_cap_stream_cfg;
+	u32 i2s_cap_cfg;
+	u32 i2s_mclk_cfg;
+
+	u32 bf_destch_ctrl;
+	u32 bf_destch_cfg;
+	u32 bf_sourcech_ctrl;
+	u32 bf_sourcech_cfg;
+	u32 bf_sourcech_grp;
+};
+
+struct cygnus_track_clk {
+	bool cap_en;
+	bool play_en;
+	bool cap_clk_en;
+	bool play_clk_en;
+};
+
+struct cygnus_aio_port {
+	int portnum;
+	int mode;
+	bool is_slave;
+	int streams_on;   /* will be 0 if both capture and play are off */
+	int fsync_width;
+	int port_type;
+
+	u32 mclk;
+	u32 lrclk;
+	u32 bit_per_frame;
+	u32 pll_clk_num;
+
+	struct cygnus_audio *cygaud;
+	struct cygnus_ssp_regs regs;
+
+	struct ringbuf_regs play_rb_regs;
+	struct ringbuf_regs capture_rb_regs;
+
+	struct snd_pcm_substream *play_stream;
+	struct snd_pcm_substream *capture_stream;
+
+	struct cygnus_track_clk clk_trace;
+};
+
+
+struct cygnus_audio {
+	struct cygnus_aio_port  portinfo[CYGNUS_MAX_PORTS];
+
+	int irq_num;
+	void __iomem *audio;
+	struct device *dev;
+	void __iomem *i2s_in;
+
+	struct clk *audio_clk[CYGNUS_AUIDO_MAX_NUM_CLKS];
+	int active_ports;
+	unsigned long vco_rate;
+};
+
+extern int cygnus_ssp_get_mode(struct snd_soc_dai *cpu_dai);
+extern int cygnus_ssp_add_pll_tweak_controls(struct snd_soc_pcm_runtime *rtd);
+extern int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai,
+						int len);
+extern int cygnus_soc_platform_register(struct device *dev,
+					struct cygnus_audio *cygaud);
+extern int cygnus_soc_platform_unregister(struct device *dev);
+extern int cygnus_ssp_set_custom_fsync_width(struct snd_soc_dai *cpu_dai,
+	int len);
+#endif