Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1806 insertions, 0 deletions

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
new file mode 100644
index 000000000..17255e968
--- /dev/null
+++ b/sound/soc/codecs/sgtl5000.c
@@ -0,0 +1,1806 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// sgtl5000.c  --  SGTL5000 ALSA SoC Audio driver
+//
+// Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/log2.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_device.h>
+#include <sound/core.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "sgtl5000.h"
+
+#define SGTL5000_DAP_REG_OFFSET	0x0100
+#define SGTL5000_MAX_REG_OFFSET	0x013A
+
+/* Delay for the VAG ramp up */
+#define SGTL5000_VAG_POWERUP_DELAY 500 /* ms */
+/* Delay for the VAG ramp down */
+#define SGTL5000_VAG_POWERDOWN_DELAY 500 /* ms */
+
+#define SGTL5000_OUTPUTS_MUTE (SGTL5000_HP_MUTE | SGTL5000_LINE_OUT_MUTE)
+
+/* default value of sgtl5000 registers */
+static const struct reg_default sgtl5000_reg_defaults[] = {
+	{ SGTL5000_CHIP_DIG_POWER,		0x0000 },
+	{ SGTL5000_CHIP_I2S_CTRL,		0x0010 },
+	{ SGTL5000_CHIP_SSS_CTRL,		0x0010 },
+	{ SGTL5000_CHIP_ADCDAC_CTRL,		0x020c },
+	{ SGTL5000_CHIP_DAC_VOL,		0x3c3c },
+	{ SGTL5000_CHIP_PAD_STRENGTH,		0x015f },
+	{ SGTL5000_CHIP_ANA_ADC_CTRL,		0x0000 },
+	{ SGTL5000_CHIP_ANA_HP_CTRL,		0x1818 },
+	{ SGTL5000_CHIP_ANA_CTRL,		0x0111 },
+	{ SGTL5000_CHIP_REF_CTRL,		0x0000 },
+	{ SGTL5000_CHIP_MIC_CTRL,		0x0000 },
+	{ SGTL5000_CHIP_LINE_OUT_CTRL,		0x0000 },
+	{ SGTL5000_CHIP_LINE_OUT_VOL,		0x0404 },
+	{ SGTL5000_CHIP_PLL_CTRL,		0x5000 },
+	{ SGTL5000_CHIP_CLK_TOP_CTRL,		0x0000 },
+	{ SGTL5000_CHIP_ANA_STATUS,		0x0000 },
+	{ SGTL5000_CHIP_SHORT_CTRL,		0x0000 },
+	{ SGTL5000_CHIP_ANA_TEST2,		0x0000 },
+	{ SGTL5000_DAP_CTRL,			0x0000 },
+	{ SGTL5000_DAP_PEQ,			0x0000 },
+	{ SGTL5000_DAP_BASS_ENHANCE,		0x0040 },
+	{ SGTL5000_DAP_BASS_ENHANCE_CTRL,	0x051f },
+	{ SGTL5000_DAP_AUDIO_EQ,		0x0000 },
+	{ SGTL5000_DAP_SURROUND,		0x0040 },
+	{ SGTL5000_DAP_EQ_BASS_BAND0,		0x002f },
+	{ SGTL5000_DAP_EQ_BASS_BAND1,		0x002f },
+	{ SGTL5000_DAP_EQ_BASS_BAND2,		0x002f },
+	{ SGTL5000_DAP_EQ_BASS_BAND3,		0x002f },
+	{ SGTL5000_DAP_EQ_BASS_BAND4,		0x002f },
+	{ SGTL5000_DAP_MAIN_CHAN,		0x8000 },
+	{ SGTL5000_DAP_MIX_CHAN,		0x0000 },
+	{ SGTL5000_DAP_AVC_CTRL,		0x5100 },
+	{ SGTL5000_DAP_AVC_THRESHOLD,		0x1473 },
+	{ SGTL5000_DAP_AVC_ATTACK,		0x0028 },
+	{ SGTL5000_DAP_AVC_DECAY,		0x0050 },
+};
+
+/* AVC: Threshold dB -> register: pre-calculated values */
+static const u16 avc_thr_db2reg[97] = {
+	0x5168, 0x488E, 0x40AA, 0x39A1, 0x335D, 0x2DC7, 0x28CC, 0x245D, 0x2068,
+	0x1CE2, 0x19BE, 0x16F1, 0x1472, 0x1239, 0x103E, 0x0E7A, 0x0CE6, 0x0B7F,
+	0x0A3F, 0x0922, 0x0824, 0x0741, 0x0677, 0x05C3, 0x0522, 0x0493, 0x0414,
+	0x03A2, 0x033D, 0x02E3, 0x0293, 0x024B, 0x020B, 0x01D2, 0x019F, 0x0172,
+	0x014A, 0x0126, 0x0106, 0x00E9, 0x00D0, 0x00B9, 0x00A5, 0x0093, 0x0083,
+	0x0075, 0x0068, 0x005D, 0x0052, 0x0049, 0x0041, 0x003A, 0x0034, 0x002E,
+	0x0029, 0x0025, 0x0021, 0x001D, 0x001A, 0x0017, 0x0014, 0x0012, 0x0010,
+	0x000E, 0x000D, 0x000B, 0x000A, 0x0009, 0x0008, 0x0007, 0x0006, 0x0005,
+	0x0005, 0x0004, 0x0004, 0x0003, 0x0003, 0x0002, 0x0002, 0x0002, 0x0002,
+	0x0001, 0x0001, 0x0001, 0x0001, 0x0001, 0x0001, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000};
+
+/* regulator supplies for sgtl5000, VDDD is an optional external supply */
+enum sgtl5000_regulator_supplies {
+	VDDA,
+	VDDIO,
+	VDDD,
+	SGTL5000_SUPPLY_NUM
+};
+
+/* vddd is optional supply */
+static const char *supply_names[SGTL5000_SUPPLY_NUM] = {
+	"VDDA",
+	"VDDIO",
+	"VDDD"
+};
+
+#define LDO_VOLTAGE		1200000
+#define LINREG_VDDD	((1600 - LDO_VOLTAGE / 1000) / 50)
+
+enum sgtl5000_micbias_resistor {
+	SGTL5000_MICBIAS_OFF = 0,
+	SGTL5000_MICBIAS_2K = 2,
+	SGTL5000_MICBIAS_4K = 4,
+	SGTL5000_MICBIAS_8K = 8,
+};
+
+enum  {
+	I2S_LRCLK_STRENGTH_DISABLE,
+	I2S_LRCLK_STRENGTH_LOW,
+	I2S_LRCLK_STRENGTH_MEDIUM,
+	I2S_LRCLK_STRENGTH_HIGH,
+};
+
+enum {
+	HP_POWER_EVENT,
+	DAC_POWER_EVENT,
+	ADC_POWER_EVENT,
+	LAST_POWER_EVENT = ADC_POWER_EVENT
+};
+
+/* sgtl5000 private structure in codec */
+struct sgtl5000_priv {
+	int sysclk;	/* sysclk rate */
+	int master;	/* i2s master or not */
+	int fmt;	/* i2s data format */
+	struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM];
+	int num_supplies;
+	struct regmap *regmap;
+	struct clk *mclk;
+	int revision;
+	u8 micbias_resistor;
+	u8 micbias_voltage;
+	u8 lrclk_strength;
+	u16 mute_state[LAST_POWER_EVENT + 1];
+};
+
+static inline int hp_sel_input(struct snd_soc_component *component)
+{
+	return (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_CTRL) &
+		SGTL5000_HP_SEL_MASK) >> SGTL5000_HP_SEL_SHIFT;
+}
+
+static inline u16 mute_output(struct snd_soc_component *component,
+			      u16 mute_mask)
+{
+	u16 mute_reg = snd_soc_component_read32(component,
+					      SGTL5000_CHIP_ANA_CTRL);
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+			    mute_mask, mute_mask);
+	return mute_reg;
+}
+
+static inline void restore_output(struct snd_soc_component *component,
+				  u16 mute_mask, u16 mute_reg)
+{
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+		mute_mask, mute_reg);
+}
+
+static void vag_power_on(struct snd_soc_component *component, u32 source)
+{
+	if (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
+	    SGTL5000_VAG_POWERUP)
+		return;
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+			    SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
+
+	/* When VAG powering on to get local loop from Line-In, the sleep
+	 * is required to avoid loud pop.
+	 */
+	if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN &&
+	    source == HP_POWER_EVENT)
+		msleep(SGTL5000_VAG_POWERUP_DELAY);
+}
+
+static int vag_power_consumers(struct snd_soc_component *component,
+			       u16 ana_pwr_reg, u32 source)
+{
+	int consumers = 0;
+
+	/* count dac/adc consumers unconditional */
+	if (ana_pwr_reg & SGTL5000_DAC_POWERUP)
+		consumers++;
+	if (ana_pwr_reg & SGTL5000_ADC_POWERUP)
+		consumers++;
+
+	/*
+	 * If the event comes from HP and Line-In is selected,
+	 * current action is 'DAC to be powered down'.
+	 * As HP_POWERUP is not set when HP muxed to line-in,
+	 * we need to keep VAG power ON.
+	 */
+	if (source == HP_POWER_EVENT) {
+		if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN)
+			consumers++;
+	} else {
+		if (ana_pwr_reg & SGTL5000_HP_POWERUP)
+			consumers++;
+	}
+
+	return consumers;
+}
+
+static void vag_power_off(struct snd_soc_component *component, u32 source)
+{
+	u16 ana_pwr = snd_soc_component_read32(component,
+					     SGTL5000_CHIP_ANA_POWER);
+
+	if (!(ana_pwr & SGTL5000_VAG_POWERUP))
+		return;
+
+	/*
+	 * This function calls when any of VAG power consumers is disappearing.
+	 * Thus, if there is more than one consumer at the moment, as minimum
+	 * one consumer will definitely stay after the end of the current
+	 * event.
+	 * Don't clear VAG_POWERUP if 2 or more consumers of VAG present:
+	 * - LINE_IN (for HP events) / HP (for DAC/ADC events)
+	 * - DAC
+	 * - ADC
+	 * (the current consumer is disappearing right now)
+	 */
+	if (vag_power_consumers(component, ana_pwr, source) >= 2)
+		return;
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+		SGTL5000_VAG_POWERUP, 0);
+	/* In power down case, we need wait 400-1000 ms
+	 * when VAG fully ramped down.
+	 * As longer we wait, as smaller pop we've got.
+	 */
+	msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+}
+
+/*
+ * mic_bias power on/off share the same register bits with
+ * output impedance of mic bias, when power on mic bias, we
+ * need reclaim it to impedance value.
+ * 0x0 = Powered off
+ * 0x1 = 2Kohm
+ * 0x2 = 4Kohm
+ * 0x3 = 8Kohm
+ */
+static int mic_bias_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+	struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		/* change mic bias resistor */
+		snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL,
+			SGTL5000_BIAS_R_MASK,
+			sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);
+		break;
+
+	case SND_SOC_DAPM_PRE_PMD:
+		snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL,
+				SGTL5000_BIAS_R_MASK, 0);
+		break;
+	}
+	return 0;
+}
+
+static int vag_and_mute_control(struct snd_soc_component *component,
+				 int event, int event_source)
+{
+	static const u16 mute_mask[] = {
+		/*
+		 * Mask for HP_POWER_EVENT.
+		 * Muxing Headphones have to be wrapped with mute/unmute
+		 * headphones only.
+		 */
+		SGTL5000_HP_MUTE,
+		/*
+		 * Masks for DAC_POWER_EVENT/ADC_POWER_EVENT.
+		 * Muxing DAC or ADC block have to wrapped with mute/unmute
+		 * both headphones and line-out.
+		 */
+		SGTL5000_OUTPUTS_MUTE,
+		SGTL5000_OUTPUTS_MUTE
+	};
+
+	struct sgtl5000_priv *sgtl5000 =
+		snd_soc_component_get_drvdata(component);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		sgtl5000->mute_state[event_source] =
+			mute_output(component, mute_mask[event_source]);
+		break;
+	case SND_SOC_DAPM_POST_PMU:
+		vag_power_on(component, event_source);
+		restore_output(component, mute_mask[event_source],
+			       sgtl5000->mute_state[event_source]);
+		break;
+	case SND_SOC_DAPM_PRE_PMD:
+		sgtl5000->mute_state[event_source] =
+			mute_output(component, mute_mask[event_source]);
+		vag_power_off(component, event_source);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		restore_output(component, mute_mask[event_source],
+			       sgtl5000->mute_state[event_source]);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * Mute Headphone when power it up/down.
+ * Control VAG power on HP power path.
+ */
+static int headphone_pga_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+
+	return vag_and_mute_control(component, event, HP_POWER_EVENT);
+}
+
+/* As manual describes, ADC/DAC powering up/down requires
+ * to mute outputs to avoid pops.
+ * Control VAG power on ADC/DAC power path.
+ */
+static int adc_updown_depop(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+
+	return vag_and_mute_control(component, event, ADC_POWER_EVENT);
+}
+
+static int dac_updown_depop(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+
+	return vag_and_mute_control(component, event, DAC_POWER_EVENT);
+}
+
+/* input sources for ADC */
+static const char *adc_mux_text[] = {
+	"MIC_IN", "LINE_IN"
+};
+
+static SOC_ENUM_SINGLE_DECL(adc_enum,
+			    SGTL5000_CHIP_ANA_CTRL, 2,
+			    adc_mux_text);
+
+static const struct snd_kcontrol_new adc_mux =
+SOC_DAPM_ENUM("Capture Mux", adc_enum);
+
+/* input sources for headphone */
+static const char *hp_mux_text[] = {
+	"DAC", "LINE_IN"
+};
+
+static SOC_ENUM_SINGLE_DECL(hp_enum,
+			    SGTL5000_CHIP_ANA_CTRL, 6,
+			    hp_mux_text);
+
+static const struct snd_kcontrol_new hp_mux =
+SOC_DAPM_ENUM("Headphone Mux", hp_enum);
+
+/* input sources for DAC */
+static const char *dac_mux_text[] = {
+	"ADC", "I2S", "Rsvrd", "DAP"
+};
+
+static SOC_ENUM_SINGLE_DECL(dac_enum,
+			    SGTL5000_CHIP_SSS_CTRL, SGTL5000_DAC_SEL_SHIFT,
+			    dac_mux_text);
+
+static const struct snd_kcontrol_new dac_mux =
+SOC_DAPM_ENUM("Digital Input Mux", dac_enum);
+
+/* input sources for DAP */
+static const char *dap_mux_text[] = {
+	"ADC", "I2S"
+};
+
+static SOC_ENUM_SINGLE_DECL(dap_enum,
+			    SGTL5000_CHIP_SSS_CTRL, SGTL5000_DAP_SEL_SHIFT,
+			    dap_mux_text);
+
+static const struct snd_kcontrol_new dap_mux =
+SOC_DAPM_ENUM("DAP Mux", dap_enum);
+
+/* input sources for DAP mix */
+static const char *dapmix_mux_text[] = {
+	"ADC", "I2S"
+};
+
+static SOC_ENUM_SINGLE_DECL(dapmix_enum,
+			    SGTL5000_CHIP_SSS_CTRL, SGTL5000_DAP_MIX_SEL_SHIFT,
+			    dapmix_mux_text);
+
+static const struct snd_kcontrol_new dapmix_mux =
+SOC_DAPM_ENUM("DAP MIX Mux", dapmix_enum);
+
+
+static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
+	SND_SOC_DAPM_INPUT("LINE_IN"),
+	SND_SOC_DAPM_INPUT("MIC_IN"),
+
+	SND_SOC_DAPM_OUTPUT("HP_OUT"),
+	SND_SOC_DAPM_OUTPUT("LINE_OUT"),
+
+	SND_SOC_DAPM_SUPPLY("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0,
+			    mic_bias_event,
+			    SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+	SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
+			   headphone_pga_event,
+			   SND_SOC_DAPM_PRE_POST_PMU |
+			   SND_SOC_DAPM_PRE_POST_PMD),
+	SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
+
+	SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
+	SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &hp_mux),
+	SND_SOC_DAPM_MUX("Digital Input Mux", SND_SOC_NOPM, 0, 0, &dac_mux),
+	SND_SOC_DAPM_MUX("DAP Mux", SGTL5000_DAP_CTRL, 0, 0, &dap_mux),
+	SND_SOC_DAPM_MUX("DAP MIX Mux", SGTL5000_DAP_CTRL, 4, 0, &dapmix_mux),
+	SND_SOC_DAPM_MIXER("DAP", SGTL5000_CHIP_DIG_POWER, 4, 0, NULL, 0),
+
+
+	/* aif for i2s input */
+	SND_SOC_DAPM_AIF_IN("AIFIN", "Playback",
+				0, SGTL5000_CHIP_DIG_POWER,
+				0, 0),
+
+	/* aif for i2s output */
+	SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture",
+				0, SGTL5000_CHIP_DIG_POWER,
+				1, 0),
+
+	SND_SOC_DAPM_ADC_E("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0,
+			   adc_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+			   SND_SOC_DAPM_PRE_POST_PMD),
+	SND_SOC_DAPM_DAC_E("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0,
+			   dac_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+			   SND_SOC_DAPM_PRE_POST_PMD),
+};
+
+/* routes for sgtl5000 */
+static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = {
+	{"Capture Mux", "LINE_IN", "LINE_IN"},	/* line_in --> adc_mux */
+	{"Capture Mux", "MIC_IN", "MIC_IN"},	/* mic_in --> adc_mux */
+
+	{"ADC", NULL, "Capture Mux"},		/* adc_mux --> adc */
+	{"AIFOUT", NULL, "ADC"},		/* adc --> i2s_out */
+
+	{"DAP Mux", "ADC", "ADC"},		/* adc --> DAP mux */
+	{"DAP Mux", NULL, "AIFIN"},		/* i2s --> DAP mux */
+	{"DAP", NULL, "DAP Mux"},		/* DAP mux --> dap */
+
+	{"DAP MIX Mux", "ADC", "ADC"},		/* adc --> DAP MIX mux */
+	{"DAP MIX Mux", NULL, "AIFIN"},		/* i2s --> DAP MIX mux */
+	{"DAP", NULL, "DAP MIX Mux"},		/* DAP MIX mux --> dap */
+
+	{"Digital Input Mux", "ADC", "ADC"},	/* adc --> audio mux */
+	{"Digital Input Mux", NULL, "AIFIN"},	/* i2s --> audio mux */
+	{"Digital Input Mux", NULL, "DAP"},	/* dap --> audio mux */
+	{"DAC", NULL, "Digital Input Mux"},	/* audio mux --> dac */
+
+	{"Headphone Mux", "DAC", "DAC"},	/* dac --> hp_mux */
+	{"LO", NULL, "DAC"},			/* dac --> line_out */
+
+	{"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */
+	{"HP", NULL, "Headphone Mux"},		/* hp_mux --> hp */
+
+	{"LINE_OUT", NULL, "LO"},
+	{"HP_OUT", NULL, "HP"},
+};
+
+/* custom function to fetch info of PCM playback volume */
+static int dac_info_volsw(struct snd_kcontrol *kcontrol,
+			  struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 0xfc - 0x3c;
+	return 0;
+}
+
+/*
+ * custom function to get of PCM playback volume
+ *
+ * dac volume register
+ * 15-------------8-7--------------0
+ * | R channel vol | L channel vol |
+ *  -------------------------------
+ *
+ * PCM volume with 0.5017 dB steps from 0 to -90 dB
+ *
+ * register values map to dB
+ * 0x3B and less = Reserved
+ * 0x3C = 0 dB
+ * 0x3D = -0.5 dB
+ * 0xF0 = -90 dB
+ * 0xFC and greater = Muted
+ *
+ * register value map to userspace value
+ *
+ * register value	0x3c(0dB)	  0xf0(-90dB)0xfc
+ *			------------------------------
+ * userspace value	0xc0			     0
+ */
+static int dac_get_volsw(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	int reg;
+	int l;
+	int r;
+
+	reg = snd_soc_component_read32(component, SGTL5000_CHIP_DAC_VOL);
+
+	/* get left channel volume */
+	l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT;
+
+	/* get right channel volume */
+	r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT;
+
+	/* make sure value fall in (0x3c,0xfc) */
+	l = clamp(l, 0x3c, 0xfc);
+	r = clamp(r, 0x3c, 0xfc);
+
+	/* invert it and map to userspace value */
+	l = 0xfc - l;
+	r = 0xfc - r;
+
+	ucontrol->value.integer.value[0] = l;
+	ucontrol->value.integer.value[1] = r;
+
+	return 0;
+}
+
+/*
+ * custom function to put of PCM playback volume
+ *
+ * dac volume register
+ * 15-------------8-7--------------0
+ * | R channel vol | L channel vol |
+ *  -------------------------------
+ *
+ * PCM volume with 0.5017 dB steps from 0 to -90 dB
+ *
+ * register values map to dB
+ * 0x3B and less = Reserved
+ * 0x3C = 0 dB
+ * 0x3D = -0.5 dB
+ * 0xF0 = -90 dB
+ * 0xFC and greater = Muted
+ *
+ * userspace value map to register value
+ *
+ * userspace value	0xc0			     0
+ *			------------------------------
+ * register value	0x3c(0dB)	0xf0(-90dB)0xfc
+ */
+static int dac_put_volsw(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	int reg;
+	int l;
+	int r;
+
+	l = ucontrol->value.integer.value[0];
+	r = ucontrol->value.integer.value[1];
+
+	/* make sure userspace volume fall in (0, 0xfc-0x3c) */
+	l = clamp(l, 0, 0xfc - 0x3c);
+	r = clamp(r, 0, 0xfc - 0x3c);
+
+	/* invert it, get the value can be set to register */
+	l = 0xfc - l;
+	r = 0xfc - r;
+
+	/* shift to get the register value */
+	reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT |
+		r << SGTL5000_DAC_VOL_RIGHT_SHIFT;
+
+	snd_soc_component_write(component, SGTL5000_CHIP_DAC_VOL, reg);
+
+	return 0;
+}
+
+/*
+ * custom function to get AVC threshold
+ *
+ * The threshold dB is calculated by rearranging the calculation from the
+ * avc_put_threshold function: register_value = 10^(dB/20) * 0.636 * 2^15 ==>
+ * dB = ( fls(register_value) - 14.347 ) * 6.02
+ *
+ * As this calculation is expensive and the threshold dB values may not exceed
+ * 0 to 96 we use pre-calculated values.
+ */
+static int avc_get_threshold(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	int db, i;
+	u16 reg = snd_soc_component_read32(component, SGTL5000_DAP_AVC_THRESHOLD);
+
+	/* register value 0 => -96dB */
+	if (!reg) {
+		ucontrol->value.integer.value[0] = 96;
+		ucontrol->value.integer.value[1] = 96;
+		return 0;
+	}
+
+	/* get dB from register value (rounded down) */
+	for (i = 0; avc_thr_db2reg[i] > reg; i++)
+		;
+	db = i;
+
+	ucontrol->value.integer.value[0] = db;
+	ucontrol->value.integer.value[1] = db;
+
+	return 0;
+}
+
+/*
+ * custom function to put AVC threshold
+ *
+ * The register value is calculated by following formula:
+ *                                    register_value = 10^(dB/20) * 0.636 * 2^15
+ * As this calculation is expensive and the threshold dB values may not exceed
+ * 0 to 96 we use pre-calculated values.
+ */
+static int avc_put_threshold(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	int db;
+	u16 reg;
+
+	db = (int)ucontrol->value.integer.value[0];
+	if (db < 0 || db > 96)
+		return -EINVAL;
+	reg = avc_thr_db2reg[db];
+	snd_soc_component_write(component, SGTL5000_DAP_AVC_THRESHOLD, reg);
+
+	return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0);
+
+/* tlv for mic gain, 0db 20db 30db 40db */
+static const DECLARE_TLV_DB_RANGE(mic_gain_tlv,
+	0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+	1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0)
+);
+
+/* tlv for DAP channels, 0% - 100% - 200% */
+static const DECLARE_TLV_DB_SCALE(dap_volume, 0, 1, 0);
+
+/* tlv for bass bands, -11.75db to 12.0db, step .25db */
+static const DECLARE_TLV_DB_SCALE(bass_band, -1175, 25, 0);
+
+/* tlv for hp volume, -51.5db to 12.0db, step .5db */
+static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0);
+
+/* tlv for lineout volume, 31 steps of .5db each */
+static const DECLARE_TLV_DB_SCALE(lineout_volume, -1550, 50, 0);
+
+/* tlv for dap avc max gain, 0db, 6db, 12db */
+static const DECLARE_TLV_DB_SCALE(avc_max_gain, 0, 600, 0);
+
+/* tlv for dap avc threshold, */
+static const DECLARE_TLV_DB_MINMAX(avc_threshold, 0, 9600);
+
+static const struct snd_kcontrol_new sgtl5000_snd_controls[] = {
+	/* SOC_DOUBLE_S8_TLV with invert */
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "PCM Playback Volume",
+		.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+			SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = dac_info_volsw,
+		.get = dac_get_volsw,
+		.put = dac_put_volsw,
+	},
+
+	SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0),
+	SOC_SINGLE_TLV("Capture Attenuate Switch (-6dB)",
+			SGTL5000_CHIP_ANA_ADC_CTRL,
+			8, 1, 0, capture_6db_attenuate),
+	SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0),
+
+	SOC_DOUBLE_TLV("Headphone Playback Volume",
+			SGTL5000_CHIP_ANA_HP_CTRL,
+			0, 8,
+			0x7f, 1,
+			headphone_volume),
+	SOC_SINGLE("Headphone Playback Switch", SGTL5000_CHIP_ANA_CTRL,
+			4, 1, 1),
+	SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL,
+			5, 1, 0),
+
+	SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL,
+			0, 3, 0, mic_gain_tlv),
+
+	SOC_DOUBLE_TLV("Lineout Playback Volume",
+			SGTL5000_CHIP_LINE_OUT_VOL,
+			SGTL5000_LINE_OUT_VOL_LEFT_SHIFT,
+			SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT,
+			0x1f, 1,
+			lineout_volume),
+	SOC_SINGLE("Lineout Playback Switch", SGTL5000_CHIP_ANA_CTRL, 8, 1, 1),
+
+	SOC_SINGLE_TLV("DAP Main channel", SGTL5000_DAP_MAIN_CHAN,
+	0, 0xffff, 0, dap_volume),
+
+	SOC_SINGLE_TLV("DAP Mix channel", SGTL5000_DAP_MIX_CHAN,
+	0, 0xffff, 0, dap_volume),
+	/* Automatic Volume Control (DAP AVC) */
+	SOC_SINGLE("AVC Switch", SGTL5000_DAP_AVC_CTRL, 0, 1, 0),
+	SOC_SINGLE("AVC Hard Limiter Switch", SGTL5000_DAP_AVC_CTRL, 5, 1, 0),
+	SOC_SINGLE_TLV("AVC Max Gain Volume", SGTL5000_DAP_AVC_CTRL, 12, 2, 0,
+			avc_max_gain),
+	SOC_SINGLE("AVC Integrator Response", SGTL5000_DAP_AVC_CTRL, 8, 3, 0),
+	SOC_SINGLE_EXT_TLV("AVC Threshold Volume", SGTL5000_DAP_AVC_THRESHOLD,
+			0, 96, 0, avc_get_threshold, avc_put_threshold,
+			avc_threshold),
+
+	SOC_SINGLE_TLV("BASS 0", SGTL5000_DAP_EQ_BASS_BAND0,
+	0, 0x5F, 0, bass_band),
+
+	SOC_SINGLE_TLV("BASS 1", SGTL5000_DAP_EQ_BASS_BAND1,
+	0, 0x5F, 0, bass_band),
+
+	SOC_SINGLE_TLV("BASS 2", SGTL5000_DAP_EQ_BASS_BAND2,
+	0, 0x5F, 0, bass_band),
+
+	SOC_SINGLE_TLV("BASS 3", SGTL5000_DAP_EQ_BASS_BAND3,
+	0, 0x5F, 0, bass_band),
+
+	SOC_SINGLE_TLV("BASS 4", SGTL5000_DAP_EQ_BASS_BAND4,
+	0, 0x5F, 0, bass_band),
+};
+
+/* mute the codec used by alsa core */
+static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	u16 i2s_pwr = SGTL5000_I2S_IN_POWERUP;
+
+	/*
+	 * During 'digital mute' do not mute DAC
+	 * because LINE_IN would be muted aswell. We want to mute
+	 * only I2S block - this can be done by powering it off
+	 */
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_DIG_POWER,
+			i2s_pwr, mute ? 0 : i2s_pwr);
+
+	return 0;
+}
+
+/* set codec format */
+static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
+	u16 i2sctl = 0;
+
+	sgtl5000->master = 0;
+	/*
+	 * i2s clock and frame master setting.
+	 * ONLY support:
+	 *  - clock and frame slave,
+	 *  - clock and frame master
+	 */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		i2sctl |= SGTL5000_I2S_MASTER;
+		sgtl5000->master = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* setting i2s data format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+		i2sctl |= SGTL5000_I2S_MODE_PCM << SGTL5000_I2S_MODE_SHIFT;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		i2sctl |= SGTL5000_I2S_MODE_PCM << SGTL5000_I2S_MODE_SHIFT;
+		i2sctl |= SGTL5000_I2S_LRALIGN;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		i2sctl |= SGTL5000_I2S_MODE_I2S_LJ << SGTL5000_I2S_MODE_SHIFT;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		i2sctl |= SGTL5000_I2S_MODE_RJ << SGTL5000_I2S_MODE_SHIFT;
+		i2sctl |= SGTL5000_I2S_LRPOL;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		i2sctl |= SGTL5000_I2S_MODE_I2S_LJ << SGTL5000_I2S_MODE_SHIFT;
+		i2sctl |= SGTL5000_I2S_LRALIGN;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+
+	/* Clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		i2sctl |= SGTL5000_I2S_SCLK_INV;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_component_write(component, SGTL5000_CHIP_I2S_CTRL, i2sctl);
+
+	return 0;
+}
+
+/* set codec sysclk */
+static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+				   int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
+
+	switch (clk_id) {
+	case SGTL5000_SYSCLK:
+		sgtl5000->sysclk = freq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * set clock according to i2s frame clock,
+ * sgtl5000 provides 2 clock sources:
+ * 1. sys_mclk: sample freq can only be configured to
+ *	1/256, 1/384, 1/512 of sys_mclk.
+ * 2. pll: can derive any audio clocks.
+ *
+ * clock setting rules:
+ * 1. in slave mode, only sys_mclk can be used
+ * 2. as constraint by sys_mclk, sample freq should be set to 32 kHz, 44.1 kHz
+ * and above.
+ * 3. usage of sys_mclk is preferred over pll to save power.
+ */
+static int sgtl5000_set_clock(struct snd_soc_component *component, int frame_rate)
+{
+	struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
+	int clk_ctl = 0;
+	int sys_fs;	/* sample freq */
+
+	/*
+	 * sample freq should be divided by frame clock,
+	 * if frame clock is lower than 44.1 kHz, sample freq should be set to
+	 * 32 kHz or 44.1 kHz.
+	 */
+	switch (frame_rate) {
+	case 8000:
+	case 16000:
+		sys_fs = 32000;
+		break;
+	case 11025:
+	case 22050:
+		sys_fs = 44100;
+		break;
+	default:
+		sys_fs = frame_rate;
+		break;
+	}
+
+	/* set divided factor of frame clock */
+	switch (sys_fs / frame_rate) {
+	case 4:
+		clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT;
+		break;
+	case 2:
+		clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT;
+		break;
+	case 1:
+		clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set the sys_fs according to frame rate */
+	switch (sys_fs) {
+	case 32000:
+		clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT;
+		break;
+	case 44100:
+		clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT;
+		break;
+	case 48000:
+		clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT;
+		break;
+	case 96000:
+		clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT;
+		break;
+	default:
+		dev_err(component->dev, "frame rate %d not supported\n",
+			frame_rate);
+		return -EINVAL;
+	}
+
+	/*
+	 * calculate the divider of mclk/sample_freq,
+	 * factor of freq = 96 kHz can only be 256, since mclk is in the range
+	 * of 8 MHz - 27 MHz
+	 */
+	switch (sgtl5000->sysclk / frame_rate) {
+	case 256:
+		clk_ctl |= SGTL5000_MCLK_FREQ_256FS <<
+			SGTL5000_MCLK_FREQ_SHIFT;
+		break;
+	case 384:
+		clk_ctl |= SGTL5000_MCLK_FREQ_384FS <<
+			SGTL5000_MCLK_FREQ_SHIFT;
+		break;
+	case 512:
+		clk_ctl |= SGTL5000_MCLK_FREQ_512FS <<
+			SGTL5000_MCLK_FREQ_SHIFT;
+		break;
+	default:
+		/* if mclk does not satisfy the divider, use pll */
+		if (sgtl5000->master) {
+			clk_ctl |= SGTL5000_MCLK_FREQ_PLL <<
+				SGTL5000_MCLK_FREQ_SHIFT;
+		} else {
+			dev_err(component->dev,
+				"PLL not supported in slave mode\n");
+			dev_err(component->dev, "%d ratio is not supported. "
+				"SYS_MCLK needs to be 256, 384 or 512 * fs\n",
+				sgtl5000->sysclk / frame_rate);
+			return -EINVAL;
+		}
+	}
+
+	/* if using pll, please check manual 6.4.2 for detail */
+	if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) {
+		u64 out, t;
+		int div2;
+		int pll_ctl;
+		unsigned int in, int_div, frac_div;
+
+		if (sgtl5000->sysclk > 17000000) {
+			div2 = 1;
+			in = sgtl5000->sysclk / 2;
+		} else {
+			div2 = 0;
+			in = sgtl5000->sysclk;
+		}
+		if (sys_fs == 44100)
+			out = 180633600;
+		else
+			out = 196608000;
+		t = do_div(out, in);
+		int_div = out;
+		t *= 2048;
+		do_div(t, in);
+		frac_div = t;
+		pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT |
+		    frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT;
+
+		snd_soc_component_write(component, SGTL5000_CHIP_PLL_CTRL, pll_ctl);
+		if (div2)
+			snd_soc_component_update_bits(component,
+				SGTL5000_CHIP_CLK_TOP_CTRL,
+				SGTL5000_INPUT_FREQ_DIV2,
+				SGTL5000_INPUT_FREQ_DIV2);
+		else
+			snd_soc_component_update_bits(component,
+				SGTL5000_CHIP_CLK_TOP_CTRL,
+				SGTL5000_INPUT_FREQ_DIV2,
+				0);
+
+		/* power up pll */
+		snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+			SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
+			SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP);
+
+		/* if using pll, clk_ctrl must be set after pll power up */
+		snd_soc_component_write(component, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
+	} else {
+		/* otherwise, clk_ctrl must be set before pll power down */
+		snd_soc_component_write(component, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
+
+		/* power down pll */
+		snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+			SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
+			0);
+	}
+
+	return 0;
+}
+
+/*
+ * Set PCM DAI bit size and sample rate.
+ * input: params_rate, params_fmt
+ */
+static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
+				  struct snd_pcm_hw_params *params,
+				  struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
+	int channels = params_channels(params);
+	int i2s_ctl = 0;
+	int stereo;
+	int ret;
+
+	/* sysclk should already set */
+	if (!sgtl5000->sysclk) {
+		dev_err(component->dev, "%s: set sysclk first!\n", __func__);
+		return -EFAULT;
+	}
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		stereo = SGTL5000_DAC_STEREO;
+	else
+		stereo = SGTL5000_ADC_STEREO;
+
+	/* set mono to save power */
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER, stereo,
+			channels == 1 ? 0 : stereo);
+
+	/* set codec clock base on lrclk */
+	ret = sgtl5000_set_clock(component, params_rate(params));
+	if (ret)
+		return ret;
+
+	/* set i2s data format */
+	switch (params_width(params)) {
+	case 16:
+		if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
+			return -EINVAL;
+		i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT;
+		i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS <<
+		    SGTL5000_I2S_SCLKFREQ_SHIFT;
+		break;
+	case 20:
+		i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT;
+		i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+		    SGTL5000_I2S_SCLKFREQ_SHIFT;
+		break;
+	case 24:
+		i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT;
+		i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+		    SGTL5000_I2S_SCLKFREQ_SHIFT;
+		break;
+	case 32:
+		if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
+			return -EINVAL;
+		i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT;
+		i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+		    SGTL5000_I2S_SCLKFREQ_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_I2S_CTRL,
+			    SGTL5000_I2S_DLEN_MASK | SGTL5000_I2S_SCLKFREQ_MASK,
+			    i2s_ctl);
+
+	return 0;
+}
+
+/*
+ * set dac bias
+ * common state changes:
+ * startup:
+ * off --> standby --> prepare --> on
+ * standby --> prepare --> on
+ *
+ * stop:
+ * on --> prepare --> standby
+ */
+static int sgtl5000_set_bias_level(struct snd_soc_component *component,
+				   enum snd_soc_bias_level level)
+{
+	struct sgtl5000_priv *sgtl = snd_soc_component_get_drvdata(component);
+	int ret;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+	case SND_SOC_BIAS_PREPARE:
+	case SND_SOC_BIAS_STANDBY:
+		regcache_cache_only(sgtl->regmap, false);
+		ret = regcache_sync(sgtl->regmap);
+		if (ret) {
+			regcache_cache_only(sgtl->regmap, true);
+			return ret;
+		}
+
+		snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+				    SGTL5000_REFTOP_POWERUP,
+				    SGTL5000_REFTOP_POWERUP);
+		break;
+	case SND_SOC_BIAS_OFF:
+		regcache_cache_only(sgtl->regmap, true);
+		snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+				    SGTL5000_REFTOP_POWERUP, 0);
+		break;
+	}
+
+	return 0;
+}
+
+#define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+			SNDRV_PCM_FMTBIT_S20_3LE |\
+			SNDRV_PCM_FMTBIT_S24_LE |\
+			SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops sgtl5000_ops = {
+	.hw_params = sgtl5000_pcm_hw_params,
+	.digital_mute = sgtl5000_digital_mute,
+	.set_fmt = sgtl5000_set_dai_fmt,
+	.set_sysclk = sgtl5000_set_dai_sysclk,
+};
+
+static struct snd_soc_dai_driver sgtl5000_dai = {
+	.name = "sgtl5000",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		/*
+		 * only support 8~48K + 96K,
+		 * TODO modify hw_param to support more
+		 */
+		.rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
+		.formats = SGTL5000_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
+		.formats = SGTL5000_FORMATS,
+	},
+	.ops = &sgtl5000_ops,
+	.symmetric_rates = 1,
+};
+
+static bool sgtl5000_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case SGTL5000_CHIP_ID:
+	case SGTL5000_CHIP_ADCDAC_CTRL:
+	case SGTL5000_CHIP_ANA_STATUS:
+		return true;
+	}
+
+	return false;
+}
+
+static bool sgtl5000_readable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case SGTL5000_CHIP_ID:
+	case SGTL5000_CHIP_DIG_POWER:
+	case SGTL5000_CHIP_CLK_CTRL:
+	case SGTL5000_CHIP_I2S_CTRL:
+	case SGTL5000_CHIP_SSS_CTRL:
+	case SGTL5000_CHIP_ADCDAC_CTRL:
+	case SGTL5000_CHIP_DAC_VOL:
+	case SGTL5000_CHIP_PAD_STRENGTH:
+	case SGTL5000_CHIP_ANA_ADC_CTRL:
+	case SGTL5000_CHIP_ANA_HP_CTRL:
+	case SGTL5000_CHIP_ANA_CTRL:
+	case SGTL5000_CHIP_LINREG_CTRL:
+	case SGTL5000_CHIP_REF_CTRL:
+	case SGTL5000_CHIP_MIC_CTRL:
+	case SGTL5000_CHIP_LINE_OUT_CTRL:
+	case SGTL5000_CHIP_LINE_OUT_VOL:
+	case SGTL5000_CHIP_ANA_POWER:
+	case SGTL5000_CHIP_PLL_CTRL:
+	case SGTL5000_CHIP_CLK_TOP_CTRL:
+	case SGTL5000_CHIP_ANA_STATUS:
+	case SGTL5000_CHIP_SHORT_CTRL:
+	case SGTL5000_CHIP_ANA_TEST2:
+	case SGTL5000_DAP_CTRL:
+	case SGTL5000_DAP_PEQ:
+	case SGTL5000_DAP_BASS_ENHANCE:
+	case SGTL5000_DAP_BASS_ENHANCE_CTRL:
+	case SGTL5000_DAP_AUDIO_EQ:
+	case SGTL5000_DAP_SURROUND:
+	case SGTL5000_DAP_FLT_COEF_ACCESS:
+	case SGTL5000_DAP_COEF_WR_B0_MSB:
+	case SGTL5000_DAP_COEF_WR_B0_LSB:
+	case SGTL5000_DAP_EQ_BASS_BAND0:
+	case SGTL5000_DAP_EQ_BASS_BAND1:
+	case SGTL5000_DAP_EQ_BASS_BAND2:
+	case SGTL5000_DAP_EQ_BASS_BAND3:
+	case SGTL5000_DAP_EQ_BASS_BAND4:
+	case SGTL5000_DAP_MAIN_CHAN:
+	case SGTL5000_DAP_MIX_CHAN:
+	case SGTL5000_DAP_AVC_CTRL:
+	case SGTL5000_DAP_AVC_THRESHOLD:
+	case SGTL5000_DAP_AVC_ATTACK:
+	case SGTL5000_DAP_AVC_DECAY:
+	case SGTL5000_DAP_COEF_WR_B1_MSB:
+	case SGTL5000_DAP_COEF_WR_B1_LSB:
+	case SGTL5000_DAP_COEF_WR_B2_MSB:
+	case SGTL5000_DAP_COEF_WR_B2_LSB:
+	case SGTL5000_DAP_COEF_WR_A1_MSB:
+	case SGTL5000_DAP_COEF_WR_A1_LSB:
+	case SGTL5000_DAP_COEF_WR_A2_MSB:
+	case SGTL5000_DAP_COEF_WR_A2_LSB:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+/*
+ * This precalculated table contains all (vag_val * 100 / lo_calcntrl) results
+ * to select an appropriate lo_vol_* in SGTL5000_CHIP_LINE_OUT_VOL
+ * The calculatation was done for all possible register values which
+ * is the array index and the following formula: 10^((idx−15)/40) * 100
+ */
+static const u8 vol_quot_table[] = {
+	42, 45, 47, 50, 53, 56, 60, 63,
+	67, 71, 75, 79, 84, 89, 94, 100,
+	106, 112, 119, 126, 133, 141, 150, 158,
+	168, 178, 188, 200, 211, 224, 237, 251
+};
+
+/*
+ * sgtl5000 has 3 internal power supplies:
+ * 1. VAG, normally set to vdda/2
+ * 2. charge pump, set to different value
+ *	according to voltage of vdda and vddio
+ * 3. line out VAG, normally set to vddio/2
+ *
+ * and should be set according to:
+ * 1. vddd provided by external or not
+ * 2. vdda and vddio voltage value. > 3.1v or not
+ */
+static int sgtl5000_set_power_regs(struct snd_soc_component *component)
+{
+	int vddd;
+	int vdda;
+	int vddio;
+	u16 ana_pwr;
+	u16 lreg_ctrl;
+	int vag;
+	int lo_vag;
+	int vol_quot;
+	int lo_vol;
+	size_t i;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
+
+	vdda  = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
+	vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer);
+	vddd  = (sgtl5000->num_supplies > VDDD)
+		? regulator_get_voltage(sgtl5000->supplies[VDDD].consumer)
+		: LDO_VOLTAGE;
+
+	vdda  = vdda / 1000;
+	vddio = vddio / 1000;
+	vddd  = vddd / 1000;
+
+	if (vdda <= 0 || vddio <= 0 || vddd < 0) {
+		dev_err(component->dev, "regulator voltage not set correctly\n");
+
+		return -EINVAL;
+	}
+
+	/* according to datasheet, maximum voltage of supplies */
+	if (vdda > 3600 || vddio > 3600 || vddd > 1980) {
+		dev_err(component->dev,
+			"exceed max voltage vdda %dmV vddio %dmV vddd %dmV\n",
+			vdda, vddio, vddd);
+
+		return -EINVAL;
+	}
+
+	/* reset value */
+	ana_pwr = snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER);
+	ana_pwr |= SGTL5000_DAC_STEREO |
+			SGTL5000_ADC_STEREO |
+			SGTL5000_REFTOP_POWERUP;
+	lreg_ctrl = snd_soc_component_read32(component, SGTL5000_CHIP_LINREG_CTRL);
+
+	if (vddio < 3100 && vdda < 3100) {
+		/* enable internal oscillator used for charge pump */
+		snd_soc_component_update_bits(component, SGTL5000_CHIP_CLK_TOP_CTRL,
+					SGTL5000_INT_OSC_EN,
+					SGTL5000_INT_OSC_EN);
+		/* Enable VDDC charge pump */
+		ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
+	} else {
+		ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP;
+		/*
+		 * if vddio == vdda the source of charge pump should be
+		 * assigned manually to VDDIO
+		 */
+		if (vddio == vdda) {
+			lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
+			lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
+				    SGTL5000_VDDC_MAN_ASSN_SHIFT;
+		}
+	}
+
+	snd_soc_component_write(component, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
+
+	snd_soc_component_write(component, SGTL5000_CHIP_ANA_POWER, ana_pwr);
+
+	/*
+	 * set ADC/DAC VAG to vdda / 2,
+	 * should stay in range (0.8v, 1.575v)
+	 */
+	vag = vdda / 2;
+	if (vag <= SGTL5000_ANA_GND_BASE)
+		vag = 0;
+	else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP *
+		 (SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT))
+		vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT;
+	else
+		vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP;
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_REF_CTRL,
+			SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT);
+
+	/* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
+	lo_vag = vddio / 2;
+	if (lo_vag <= SGTL5000_LINE_OUT_GND_BASE)
+		lo_vag = 0;
+	else if (lo_vag >= SGTL5000_LINE_OUT_GND_BASE +
+		SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
+		lo_vag = SGTL5000_LINE_OUT_GND_MAX;
+	else
+		lo_vag = (lo_vag - SGTL5000_LINE_OUT_GND_BASE) /
+		    SGTL5000_LINE_OUT_GND_STP;
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_LINE_OUT_CTRL,
+			SGTL5000_LINE_OUT_CURRENT_MASK |
+			SGTL5000_LINE_OUT_GND_MASK,
+			lo_vag << SGTL5000_LINE_OUT_GND_SHIFT |
+			SGTL5000_LINE_OUT_CURRENT_360u <<
+				SGTL5000_LINE_OUT_CURRENT_SHIFT);
+
+	/*
+	 * Set lineout output level in range (0..31)
+	 * the same value is used for right and left channel
+	 *
+	 * Searching for a suitable index solving this formula:
+	 * idx = 40 * log10(vag_val / lo_cagcntrl) + 15
+	 */
+	vol_quot = lo_vag ? (vag * 100) / lo_vag : 0;
+	lo_vol = 0;
+	for (i = 0; i < ARRAY_SIZE(vol_quot_table); i++) {
+		if (vol_quot >= vol_quot_table[i])
+			lo_vol = i;
+		else
+			break;
+	}
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_LINE_OUT_VOL,
+		SGTL5000_LINE_OUT_VOL_RIGHT_MASK |
+		SGTL5000_LINE_OUT_VOL_LEFT_MASK,
+		lo_vol << SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT |
+		lo_vol << SGTL5000_LINE_OUT_VOL_LEFT_SHIFT);
+
+	return 0;
+}
+
+static int sgtl5000_enable_regulators(struct i2c_client *client)
+{
+	int ret;
+	int i;
+	int external_vddd = 0;
+	struct regulator *vddd;
+	struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
+
+	for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++)
+		sgtl5000->supplies[i].supply = supply_names[i];
+
+	vddd = regulator_get_optional(&client->dev, "VDDD");
+	if (IS_ERR(vddd)) {
+		/* See if it's just not registered yet */
+		if (PTR_ERR(vddd) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+	} else {
+		external_vddd = 1;
+		regulator_put(vddd);
+	}
+
+	sgtl5000->num_supplies = ARRAY_SIZE(sgtl5000->supplies)
+				 - 1 + external_vddd;
+	ret = regulator_bulk_get(&client->dev, sgtl5000->num_supplies,
+				 sgtl5000->supplies);
+	if (ret)
+		return ret;
+
+	ret = regulator_bulk_enable(sgtl5000->num_supplies,
+				    sgtl5000->supplies);
+	if (!ret)
+		usleep_range(10, 20);
+	else
+		regulator_bulk_free(sgtl5000->num_supplies,
+				    sgtl5000->supplies);
+
+	return ret;
+}
+
+static int sgtl5000_probe(struct snd_soc_component *component)
+{
+	int ret;
+	u16 reg;
+	struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
+	unsigned int zcd_mask = SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN;
+
+	/* power up sgtl5000 */
+	ret = sgtl5000_set_power_regs(component);
+	if (ret)
+		goto err;
+
+	/* enable small pop, introduce 400ms delay in turning off */
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_REF_CTRL,
+				SGTL5000_SMALL_POP, 1);
+
+	/* disable short cut detector */
+	snd_soc_component_write(component, SGTL5000_CHIP_SHORT_CTRL, 0);
+
+	snd_soc_component_write(component, SGTL5000_CHIP_DIG_POWER,
+			SGTL5000_ADC_EN | SGTL5000_DAC_EN);
+
+	/* enable dac volume ramp by default */
+	snd_soc_component_write(component, SGTL5000_CHIP_ADCDAC_CTRL,
+			SGTL5000_DAC_VOL_RAMP_EN |
+			SGTL5000_DAC_MUTE_RIGHT |
+			SGTL5000_DAC_MUTE_LEFT);
+
+	reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT | 0x5f);
+	snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg);
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+		zcd_mask, zcd_mask);
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL,
+			SGTL5000_BIAS_R_MASK,
+			sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL,
+			SGTL5000_BIAS_VOLT_MASK,
+			sgtl5000->micbias_voltage << SGTL5000_BIAS_VOLT_SHIFT);
+	/*
+	 * enable DAP Graphic EQ
+	 * TODO:
+	 * Add control for changing between PEQ/Tone Control/GEQ
+	 */
+	snd_soc_component_write(component, SGTL5000_DAP_AUDIO_EQ, SGTL5000_DAP_SEL_GEQ);
+
+	/* Unmute DAC after start */
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ADCDAC_CTRL,
+		SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT, 0);
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static const struct snd_soc_component_driver sgtl5000_driver = {
+	.probe			= sgtl5000_probe,
+	.set_bias_level		= sgtl5000_set_bias_level,
+	.controls		= sgtl5000_snd_controls,
+	.num_controls		= ARRAY_SIZE(sgtl5000_snd_controls),
+	.dapm_widgets		= sgtl5000_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(sgtl5000_dapm_widgets),
+	.dapm_routes		= sgtl5000_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(sgtl5000_dapm_routes),
+	.suspend_bias_off	= 1,
+	.idle_bias_on		= 1,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+static const struct regmap_config sgtl5000_regmap = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.reg_stride = 2,
+
+	.max_register = SGTL5000_MAX_REG_OFFSET,
+	.volatile_reg = sgtl5000_volatile,
+	.readable_reg = sgtl5000_readable,
+
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults = sgtl5000_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(sgtl5000_reg_defaults),
+};
+
+/*
+ * Write all the default values from sgtl5000_reg_defaults[] array into the
+ * sgtl5000 registers, to make sure we always start with the sane registers
+ * values as stated in the datasheet.
+ *
+ * Since sgtl5000 does not have a reset line, nor a reset command in software,
+ * we follow this approach to guarantee we always start from the default values
+ * and avoid problems like, not being able to probe after an audio playback
+ * followed by a system reset or a 'reboot' command in Linux
+ */
+static void sgtl5000_fill_defaults(struct i2c_client *client)
+{
+	struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
+	int i, ret, val, index;
+
+	for (i = 0; i < ARRAY_SIZE(sgtl5000_reg_defaults); i++) {
+		val = sgtl5000_reg_defaults[i].def;
+		index = sgtl5000_reg_defaults[i].reg;
+		ret = regmap_write(sgtl5000->regmap, index, val);
+		if (ret)
+			dev_err(&client->dev,
+				"%s: error %d setting reg 0x%02x to 0x%04x\n",
+				__func__, ret, index, val);
+	}
+}
+
+static int sgtl5000_i2c_probe(struct i2c_client *client,
+			      const struct i2c_device_id *id)
+{
+	struct sgtl5000_priv *sgtl5000;
+	int ret, reg, rev;
+	struct device_node *np = client->dev.of_node;
+	u32 value;
+	u16 ana_pwr;
+
+	sgtl5000 = devm_kzalloc(&client->dev, sizeof(*sgtl5000), GFP_KERNEL);
+	if (!sgtl5000)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, sgtl5000);
+
+	ret = sgtl5000_enable_regulators(client);
+	if (ret)
+		return ret;
+
+	sgtl5000->regmap = devm_regmap_init_i2c(client, &sgtl5000_regmap);
+	if (IS_ERR(sgtl5000->regmap)) {
+		ret = PTR_ERR(sgtl5000->regmap);
+		dev_err(&client->dev, "Failed to allocate regmap: %d\n", ret);
+		goto disable_regs;
+	}
+
+	sgtl5000->mclk = devm_clk_get(&client->dev, NULL);
+	if (IS_ERR(sgtl5000->mclk)) {
+		ret = PTR_ERR(sgtl5000->mclk);
+		/* Defer the probe to see if the clk will be provided later */
+		if (ret == -ENOENT)
+			ret = -EPROBE_DEFER;
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(&client->dev, "Failed to get mclock: %d\n",
+				ret);
+		goto disable_regs;
+	}
+
+	ret = clk_prepare_enable(sgtl5000->mclk);
+	if (ret) {
+		dev_err(&client->dev, "Error enabling clock %d\n", ret);
+		goto disable_regs;
+	}
+
+	/* Need 8 clocks before I2C accesses */
+	udelay(1);
+
+	/* read chip information */
+	ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, &reg);
+	if (ret) {
+		dev_err(&client->dev, "Error reading chip id %d\n", ret);
+		goto disable_clk;
+	}
+
+	if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
+	    SGTL5000_PARTID_PART_ID) {
+		dev_err(&client->dev,
+			"Device with ID register %x is not a sgtl5000\n", reg);
+		ret = -ENODEV;
+		goto disable_clk;
+	}
+
+	rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
+	dev_info(&client->dev, "sgtl5000 revision 0x%x\n", rev);
+	sgtl5000->revision = rev;
+
+	/* reconfigure the clocks in case we're using the PLL */
+	ret = regmap_write(sgtl5000->regmap,
+			   SGTL5000_CHIP_CLK_CTRL,
+			   SGTL5000_CHIP_CLK_CTRL_DEFAULT);
+	if (ret)
+		dev_err(&client->dev,
+			"Error %d initializing CHIP_CLK_CTRL\n", ret);
+
+	/* Mute everything to avoid pop from the following power-up */
+	ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_CTRL,
+			   SGTL5000_CHIP_ANA_CTRL_DEFAULT);
+	if (ret) {
+		dev_err(&client->dev,
+			"Error %d muting outputs via CHIP_ANA_CTRL\n", ret);
+		goto disable_clk;
+	}
+
+	/*
+	 * If VAG is powered-on (e.g. from previous boot), it would be disabled
+	 * by the write to ANA_POWER in later steps of the probe code. This
+	 * may create a loud pop even with all outputs muted. The proper way
+	 * to circumvent this is disabling the bit first and waiting the proper
+	 * cool-down time.
+	 */
+	ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, &value);
+	if (ret) {
+		dev_err(&client->dev, "Failed to read ANA_POWER: %d\n", ret);
+		goto disable_clk;
+	}
+	if (value & SGTL5000_VAG_POWERUP) {
+		ret = regmap_update_bits(sgtl5000->regmap,
+					 SGTL5000_CHIP_ANA_POWER,
+					 SGTL5000_VAG_POWERUP,
+					 0);
+		if (ret) {
+			dev_err(&client->dev, "Error %d disabling VAG\n", ret);
+			goto disable_clk;
+		}
+
+		msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+	}
+
+	/* Follow section 2.2.1.1 of AN3663 */
+	ana_pwr = SGTL5000_ANA_POWER_DEFAULT;
+	if (sgtl5000->num_supplies <= VDDD) {
+		/* internal VDDD at 1.2V */
+		ret = regmap_update_bits(sgtl5000->regmap,
+					 SGTL5000_CHIP_LINREG_CTRL,
+					 SGTL5000_LINREG_VDDD_MASK,
+					 LINREG_VDDD);
+		if (ret)
+			dev_err(&client->dev,
+				"Error %d setting LINREG_VDDD\n", ret);
+
+		ana_pwr |= SGTL5000_LINEREG_D_POWERUP;
+		dev_info(&client->dev,
+			 "Using internal LDO instead of VDDD: check ER1 erratum\n");
+	} else {
+		/* using external LDO for VDDD
+		 * Clear startup powerup and simple powerup
+		 * bits to save power
+		 */
+		ana_pwr &= ~(SGTL5000_STARTUP_POWERUP
+			     | SGTL5000_LINREG_SIMPLE_POWERUP);
+		dev_dbg(&client->dev, "Using external VDDD\n");
+	}
+	ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, ana_pwr);
+	if (ret)
+		dev_err(&client->dev,
+			"Error %d setting CHIP_ANA_POWER to %04x\n",
+			ret, ana_pwr);
+
+	if (np) {
+		if (!of_property_read_u32(np,
+			"micbias-resistor-k-ohms", &value)) {
+			switch (value) {
+			case SGTL5000_MICBIAS_OFF:
+				sgtl5000->micbias_resistor = 0;
+				break;
+			case SGTL5000_MICBIAS_2K:
+				sgtl5000->micbias_resistor = 1;
+				break;
+			case SGTL5000_MICBIAS_4K:
+				sgtl5000->micbias_resistor = 2;
+				break;
+			case SGTL5000_MICBIAS_8K:
+				sgtl5000->micbias_resistor = 3;
+				break;
+			default:
+				sgtl5000->micbias_resistor = 2;
+				dev_err(&client->dev,
+					"Unsuitable MicBias resistor\n");
+			}
+		} else {
+			/* default is 4Kohms */
+			sgtl5000->micbias_resistor = 2;
+		}
+		if (!of_property_read_u32(np,
+			"micbias-voltage-m-volts", &value)) {
+			/* 1250mV => 0 */
+			/* steps of 250mV */
+			if ((value >= 1250) && (value <= 3000))
+				sgtl5000->micbias_voltage = (value / 250) - 5;
+			else {
+				sgtl5000->micbias_voltage = 0;
+				dev_err(&client->dev,
+					"Unsuitable MicBias voltage\n");
+			}
+		} else {
+			sgtl5000->micbias_voltage = 0;
+		}
+	}
+
+	sgtl5000->lrclk_strength = I2S_LRCLK_STRENGTH_LOW;
+	if (!of_property_read_u32(np, "lrclk-strength", &value)) {
+		if (value > I2S_LRCLK_STRENGTH_HIGH)
+			value = I2S_LRCLK_STRENGTH_LOW;
+		sgtl5000->lrclk_strength = value;
+	}
+
+	/* Ensure sgtl5000 will start with sane register values */
+	sgtl5000_fill_defaults(client);
+
+	ret = devm_snd_soc_register_component(&client->dev,
+			&sgtl5000_driver, &sgtl5000_dai, 1);
+	if (ret)
+		goto disable_clk;
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(sgtl5000->mclk);
+
+disable_regs:
+	regulator_bulk_disable(sgtl5000->num_supplies, sgtl5000->supplies);
+	regulator_bulk_free(sgtl5000->num_supplies, sgtl5000->supplies);
+
+	return ret;
+}
+
+static int sgtl5000_i2c_remove(struct i2c_client *client)
+{
+	struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
+
+	clk_disable_unprepare(sgtl5000->mclk);
+	regulator_bulk_disable(sgtl5000->num_supplies, sgtl5000->supplies);
+	regulator_bulk_free(sgtl5000->num_supplies, sgtl5000->supplies);
+
+	return 0;
+}
+
+static const struct i2c_device_id sgtl5000_id[] = {
+	{"sgtl5000", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, sgtl5000_id);
+
+static const struct of_device_id sgtl5000_dt_ids[] = {
+	{ .compatible = "fsl,sgtl5000", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sgtl5000_dt_ids);
+
+static struct i2c_driver sgtl5000_i2c_driver = {
+	.driver = {
+		   .name = "sgtl5000",
+		   .of_match_table = sgtl5000_dt_ids,
+		   },
+	.probe = sgtl5000_i2c_probe,
+	.remove = sgtl5000_i2c_remove,
+	.id_table = sgtl5000_id,
+};
+
+module_i2c_driver(sgtl5000_i2c_driver);
+
+MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver");
+MODULE_AUTHOR("Zeng Zhaoming <zengzm.kernel@gmail.com>");
+MODULE_LICENSE("GPL");