Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 291 insertions, 0 deletions

diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
new file mode 100644
index 000000000..34c35196a
--- /dev/null
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -0,0 +1,291 @@
+/*
+ * ALSA SoC TLV320AIC3X codec driver
+ *
+ * Author:      Vladimir Barinov, <vbarinov@embeddedalley.com>
+ * Copyright:   (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _AIC3X_H
+#define _AIC3X_H
+
+/* AIC3X register space */
+#define AIC3X_CACHEREGNUM		110
+
+/* Page select register */
+#define AIC3X_PAGE_SELECT		0
+/* Software reset register */
+#define AIC3X_RESET			1
+/* Codec Sample rate select register */
+#define AIC3X_SAMPLE_RATE_SEL_REG	2
+/* PLL progrramming register A */
+#define AIC3X_PLL_PROGA_REG		3
+/* PLL progrramming register B */
+#define AIC3X_PLL_PROGB_REG		4
+/* PLL progrramming register C */
+#define AIC3X_PLL_PROGC_REG		5
+/* PLL progrramming register D */
+#define AIC3X_PLL_PROGD_REG		6
+/* Codec datapath setup register */
+#define AIC3X_CODEC_DATAPATH_REG	7
+/* Audio serial data interface control register A */
+#define AIC3X_ASD_INTF_CTRLA		8
+/* Audio serial data interface control register B */
+#define AIC3X_ASD_INTF_CTRLB		9
+/* Audio serial data interface control register C */
+#define AIC3X_ASD_INTF_CTRLC		10
+/* Audio overflow status and PLL R value programming register */
+#define AIC3X_OVRF_STATUS_AND_PLLR_REG	11
+/* Audio codec digital filter control register */
+#define AIC3X_CODEC_DFILT_CTRL		12
+/* Headset/button press detection register */
+#define AIC3X_HEADSET_DETECT_CTRL_A	13
+#define AIC3X_HEADSET_DETECT_CTRL_B	14
+/* ADC PGA Gain control registers */
+#define LADC_VOL			15
+#define RADC_VOL			16
+/* MIC3 control registers */
+#define MIC3LR_2_LADC_CTRL		17
+#define MIC3LR_2_RADC_CTRL		18
+/* Line1 Input control registers */
+#define LINE1L_2_LADC_CTRL		19
+#define LINE1R_2_LADC_CTRL		21
+#define LINE1R_2_RADC_CTRL		22
+#define LINE1L_2_RADC_CTRL		24
+/* Line2 Input control registers */
+#define LINE2L_2_LADC_CTRL		20
+#define LINE2R_2_RADC_CTRL		23
+/* MICBIAS Control Register */
+#define MICBIAS_CTRL			25
+
+/* AGC Control Registers A, B, C */
+#define LAGC_CTRL_A			26
+#define LAGC_CTRL_B			27
+#define LAGC_CTRL_C			28
+#define RAGC_CTRL_A			29
+#define RAGC_CTRL_B			30
+#define RAGC_CTRL_C			31
+
+/* DAC Power and Left High Power Output control registers */
+#define DAC_PWR				37
+#define HPLCOM_CFG			37
+/* Right High Power Output control registers */
+#define HPRCOM_CFG			38
+/* High Power Output Stage Control Register */
+#define HPOUT_SC			40
+/* DAC Output Switching control registers */
+#define DAC_LINE_MUX			41
+/* High Power Output Driver Pop Reduction registers */
+#define HPOUT_POP_REDUCTION		42
+/* DAC Digital control registers */
+#define LDAC_VOL			43
+#define RDAC_VOL			44
+/* Left High Power Output control registers */
+#define LINE2L_2_HPLOUT_VOL		45
+#define PGAL_2_HPLOUT_VOL		46
+#define DACL1_2_HPLOUT_VOL		47
+#define LINE2R_2_HPLOUT_VOL		48
+#define PGAR_2_HPLOUT_VOL		49
+#define DACR1_2_HPLOUT_VOL		50
+#define HPLOUT_CTRL			51
+/* Left High Power COM control registers */
+#define LINE2L_2_HPLCOM_VOL		52
+#define PGAL_2_HPLCOM_VOL		53
+#define DACL1_2_HPLCOM_VOL		54
+#define LINE2R_2_HPLCOM_VOL		55
+#define PGAR_2_HPLCOM_VOL		56
+#define DACR1_2_HPLCOM_VOL		57
+#define HPLCOM_CTRL			58
+/* Right High Power Output control registers */
+#define LINE2L_2_HPROUT_VOL		59
+#define PGAL_2_HPROUT_VOL		60
+#define DACL1_2_HPROUT_VOL		61
+#define LINE2R_2_HPROUT_VOL		62
+#define PGAR_2_HPROUT_VOL		63
+#define DACR1_2_HPROUT_VOL		64
+#define HPROUT_CTRL			65
+/* Right High Power COM control registers */
+#define LINE2L_2_HPRCOM_VOL		66
+#define PGAL_2_HPRCOM_VOL		67
+#define DACL1_2_HPRCOM_VOL		68
+#define LINE2R_2_HPRCOM_VOL		69
+#define PGAR_2_HPRCOM_VOL		70
+#define DACR1_2_HPRCOM_VOL		71
+#define HPRCOM_CTRL			72
+/* Mono Line Output Plus/Minus control registers */
+#define LINE2L_2_MONOLOPM_VOL		73
+#define PGAL_2_MONOLOPM_VOL		74
+#define DACL1_2_MONOLOPM_VOL		75
+#define LINE2R_2_MONOLOPM_VOL		76
+#define PGAR_2_MONOLOPM_VOL		77
+#define DACR1_2_MONOLOPM_VOL		78
+#define MONOLOPM_CTRL			79
+/* Class-D speaker driver on tlv320aic3007 */
+#define CLASSD_CTRL			73
+/* Left Line Output Plus/Minus control registers */
+#define LINE2L_2_LLOPM_VOL		80
+#define PGAL_2_LLOPM_VOL		81
+#define DACL1_2_LLOPM_VOL		82
+#define LINE2R_2_LLOPM_VOL		83
+#define PGAR_2_LLOPM_VOL		84
+#define DACR1_2_LLOPM_VOL		85
+#define LLOPM_CTRL			86
+/* Right Line Output Plus/Minus control registers */
+#define LINE2L_2_RLOPM_VOL		87
+#define PGAL_2_RLOPM_VOL		88
+#define DACL1_2_RLOPM_VOL		89
+#define LINE2R_2_RLOPM_VOL		90
+#define PGAR_2_RLOPM_VOL		91
+#define DACR1_2_RLOPM_VOL		92
+#define RLOPM_CTRL			93
+/* GPIO/IRQ registers */
+#define AIC3X_STICKY_IRQ_FLAGS_REG	96
+#define AIC3X_RT_IRQ_FLAGS_REG		97
+#define AIC3X_GPIO1_REG			98
+#define AIC3X_GPIO2_REG			99
+#define AIC3X_GPIOA_REG			100
+#define AIC3X_GPIOB_REG			101
+/* Clock generation control register */
+#define AIC3X_CLKGEN_CTRL_REG		102
+/* New AGC registers */
+#define LAGCN_ATTACK			103
+#define LAGCN_DECAY			104
+#define RAGCN_ATTACK			105
+#define RAGCN_DECAY			106
+/* New Programmable ADC Digital Path and I2C Bus Condition Register */
+#define NEW_ADC_DIGITALPATH		107
+/* Passive Analog Signal Bypass Selection During Powerdown Register */
+#define PASSIVE_BYPASS			108
+/* DAC Quiescent Current Adjustment Register */
+#define DAC_ICC_ADJ			109
+
+/* Page select register bits */
+#define PAGE0_SELECT		0
+#define PAGE1_SELECT		1
+
+/* Audio serial data interface control register A bits */
+#define BIT_CLK_MASTER          0x80
+#define WORD_CLK_MASTER         0x40
+#define DOUT_TRISTATE		0x20
+
+/* Codec Datapath setup register 7 */
+#define FSREF_44100		(1 << 7)
+#define FSREF_48000		(0 << 7)
+#define DUAL_RATE_MODE		((1 << 5) | (1 << 6))
+#define LDAC2LCH		(0x1 << 3)
+#define RDAC2RCH		(0x1 << 1)
+#define LDAC2RCH		(0x2 << 3)
+#define RDAC2LCH		(0x2 << 1)
+#define LDAC2MONOMIX		(0x3 << 3)
+#define RDAC2MONOMIX		(0x3 << 1)
+
+/* PLL registers bitfields */
+#define PLLP_SHIFT		0
+#define PLLP_MASK		7
+#define PLLQ_SHIFT		3
+#define PLLR_SHIFT		0
+#define PLLJ_SHIFT		2
+#define PLLD_MSB_SHIFT		0
+#define PLLD_LSB_SHIFT		2
+
+/* Clock generation register bits */
+#define CODEC_CLKIN_PLLDIV	0
+#define CODEC_CLKIN_CLKDIV	1
+#define PLL_CLKIN_SHIFT		4
+#define MCLK_SOURCE		0x0
+#define PLL_CLKDIV_SHIFT	0
+#define PLLCLK_IN_MASK		0x30
+#define PLLCLK_IN_SHIFT		4
+#define CLKDIV_IN_MASK		0xc0
+#define CLKDIV_IN_SHIFT		6
+/* clock in source */
+#define CLKIN_MCLK		0
+#define CLKIN_GPIO2		1
+#define CLKIN_BCLK		2
+
+/* Software reset register bits */
+#define SOFT_RESET		0x80
+
+/* PLL progrramming register A bits */
+#define PLL_ENABLE		0x80
+
+/* Route bits */
+#define ROUTE_ON		0x80
+
+/* Mute bits */
+#define UNMUTE			0x08
+#define MUTE_ON			0x80
+
+/* Power bits */
+#define LADC_PWR_ON		0x04
+#define RADC_PWR_ON		0x04
+#define LDAC_PWR_ON		0x80
+#define RDAC_PWR_ON		0x40
+#define HPLOUT_PWR_ON		0x01
+#define HPROUT_PWR_ON		0x01
+#define HPLCOM_PWR_ON		0x01
+#define HPRCOM_PWR_ON		0x01
+#define MONOLOPM_PWR_ON		0x01
+#define LLOPM_PWR_ON		0x01
+#define RLOPM_PWR_ON	0x01
+
+#define INVERT_VOL(val)   (0x7f - val)
+
+/* Default output volume (inverted) */
+#define DEFAULT_VOL     INVERT_VOL(0x50)
+/* Default input volume */
+#define DEFAULT_GAIN    0x20
+
+/* MICBIAS Control Register */
+#define MICBIAS_LEVEL_SHIFT	(6)
+#define MICBIAS_LEVEL_MASK	(3 << 6)
+
+/* HPOUT_SC */
+#define HPOUT_SC_OCMV_MASK	(3 << 6)
+#define HPOUT_SC_OCMV_SHIFT	(6)
+#define HPOUT_SC_OCMV_1_35V	0
+#define HPOUT_SC_OCMV_1_5V	1
+#define HPOUT_SC_OCMV_1_65V	2
+#define HPOUT_SC_OCMV_1_8V	3
+
+/* headset detection / button API */
+
+/* The AIC3x supports detection of stereo headsets (GND + left + right signal)
+ * and cellular headsets (GND + speaker output + microphone input).
+ * It is recommended to enable MIC bias for this function to work properly.
+ * For more information, please refer to the datasheet. */
+enum {
+	AIC3X_HEADSET_DETECT_OFF	= 0,
+	AIC3X_HEADSET_DETECT_STEREO	= 1,
+	AIC3X_HEADSET_DETECT_CELLULAR   = 2,
+	AIC3X_HEADSET_DETECT_BOTH	= 3
+};
+
+enum {
+	AIC3X_HEADSET_DEBOUNCE_16MS	= 0,
+	AIC3X_HEADSET_DEBOUNCE_32MS	= 1,
+	AIC3X_HEADSET_DEBOUNCE_64MS	= 2,
+	AIC3X_HEADSET_DEBOUNCE_128MS	= 3,
+	AIC3X_HEADSET_DEBOUNCE_256MS	= 4,
+	AIC3X_HEADSET_DEBOUNCE_512MS	= 5
+};
+
+enum {
+	AIC3X_BUTTON_DEBOUNCE_0MS	= 0,
+	AIC3X_BUTTON_DEBOUNCE_8MS	= 1,
+	AIC3X_BUTTON_DEBOUNCE_16MS	= 2,
+	AIC3X_BUTTON_DEBOUNCE_32MS	= 3
+};
+
+#define AIC3X_HEADSET_DETECT_ENABLED	0x80
+#define AIC3X_HEADSET_DETECT_SHIFT	5
+#define AIC3X_HEADSET_DETECT_MASK	3
+#define AIC3X_HEADSET_DEBOUNCE_SHIFT	2
+#define AIC3X_HEADSET_DEBOUNCE_MASK	7
+#define AIC3X_BUTTON_DEBOUNCE_SHIFT 	0
+#define AIC3X_BUTTON_DEBOUNCE_MASK	3
+
+#endif /* _AIC3X_H */