Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

112 files changed, 18449 insertions, 0 deletions

diff --git a/tools/include/asm-generic/atomic-gcc.h b/tools/include/asm-generic/atomic-gcc.h
new file mode 100644
index 000000000..4c1966f7c
--- /dev/null
+++ b/tools/include/asm-generic/atomic-gcc.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __TOOLS_ASM_GENERIC_ATOMIC_H
+#define __TOOLS_ASM_GENERIC_ATOMIC_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * Excerpts obtained from the Linux kernel sources.
+ */
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+static inline int atomic_read(const atomic_t *v)
+{
+	return READ_ONCE((v)->counter);
+}
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+static inline void atomic_set(atomic_t *v, int i)
+{
+        v->counter = i;
+}
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+static inline void atomic_inc(atomic_t *v)
+{
+	__sync_add_and_fetch(&v->counter, 1);
+}
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+	return __sync_sub_and_fetch(&v->counter, 1) == 0;
+}
+
+#define cmpxchg(ptr, oldval, newval) \
+	__sync_val_compare_and_swap(ptr, oldval, newval)
+
+static inline int atomic_cmpxchg(atomic_t *v, int oldval, int newval)
+{
+	return cmpxchg(&(v)->counter, oldval, newval);
+}
+
+#endif /* __TOOLS_ASM_GENERIC_ATOMIC_H */
diff --git a/tools/include/asm-generic/barrier.h b/tools/include/asm-generic/barrier.h
new file mode 100644
index 000000000..52278d880
--- /dev/null
+++ b/tools/include/asm-generic/barrier.h
@@ -0,0 +1,44 @@
+/*
+ * Copied from the kernel sources to tools/perf/:
+ *
+ * Generic barrier definitions.
+ *
+ * It should be possible to use these on really simple architectures,
+ * but it serves more as a starting point for new ports.
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef __TOOLS_LINUX_ASM_GENERIC_BARRIER_H
+#define __TOOLS_LINUX_ASM_GENERIC_BARRIER_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+
+/*
+ * Force strict CPU ordering. And yes, this is required on UP too when we're
+ * talking to devices.
+ *
+ * Fall back to compiler barriers if nothing better is provided.
+ */
+
+#ifndef mb
+#define mb()	barrier()
+#endif
+
+#ifndef rmb
+#define rmb()	mb()
+#endif
+
+#ifndef wmb
+#define wmb()	mb()
+#endif
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __TOOLS_LINUX_ASM_GENERIC_BARRIER_H */
diff --git a/tools/include/asm-generic/bitops.h b/tools/include/asm-generic/bitops.h
new file mode 100644
index 000000000..9bce3b56b
--- /dev/null
+++ b/tools/include/asm-generic/bitops.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __TOOLS_ASM_GENERIC_BITOPS_H
+#define __TOOLS_ASM_GENERIC_BITOPS_H
+
+/*
+ * tools/ copied this from include/asm-generic/bitops.h, bit by bit as it needed
+ * some functions.
+ *
+ * For the benefit of those who are trying to port Linux to another
+ * architecture, here are some C-language equivalents.  You should
+ * recode these in the native assembly language, if at all possible.
+ *
+ * C language equivalents written by Theodore Ts'o, 9/26/92
+ */
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/__ffz.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+
+#ifndef _TOOLS_LINUX_BITOPS_H_
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/hweight.h>
+
+#include <asm-generic/bitops/atomic.h>
+
+#endif /* __TOOLS_ASM_GENERIC_BITOPS_H */
diff --git a/tools/include/asm-generic/bitops/__ffs.h b/tools/include/asm-generic/bitops/__ffs.h
new file mode 100644
index 000000000..9d1310519
--- /dev/null
+++ b/tools/include/asm-generic/bitops/__ffs.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_ASM_GENERIC_BITOPS___FFS_H_
+#define _TOOLS_LINUX_ASM_GENERIC_BITOPS___FFS_H_
+
+#include <asm/types.h>
+#include <asm/bitsperlong.h>
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __always_inline unsigned long __ffs(unsigned long word)
+{
+	int num = 0;
+
+#if __BITS_PER_LONG == 64
+	if ((word & 0xffffffff) == 0) {
+		num += 32;
+		word >>= 32;
+	}
+#endif
+	if ((word & 0xffff) == 0) {
+		num += 16;
+		word >>= 16;
+	}
+	if ((word & 0xff) == 0) {
+		num += 8;
+		word >>= 8;
+	}
+	if ((word & 0xf) == 0) {
+		num += 4;
+		word >>= 4;
+	}
+	if ((word & 0x3) == 0) {
+		num += 2;
+		word >>= 2;
+	}
+	if ((word & 0x1) == 0)
+		num += 1;
+	return num;
+}
+
+#endif /* _TOOLS_LINUX_ASM_GENERIC_BITOPS___FFS_H_ */
diff --git a/tools/include/asm-generic/bitops/__ffz.h b/tools/include/asm-generic/bitops/__ffz.h
new file mode 100644
index 000000000..6744bd4cd
--- /dev/null
+++ b/tools/include/asm-generic/bitops/__ffz.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_GENERIC_BITOPS_FFZ_H_
+#define _ASM_GENERIC_BITOPS_FFZ_H_
+
+/*
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+#define ffz(x)  __ffs(~(x))
+
+#endif /* _ASM_GENERIC_BITOPS_FFZ_H_ */
diff --git a/tools/include/asm-generic/bitops/__fls.h b/tools/include/asm-generic/bitops/__fls.h
new file mode 100644
index 000000000..03f721a8a
--- /dev/null
+++ b/tools/include/asm-generic/bitops/__fls.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_GENERIC_BITOPS___FLS_H_
+#define _ASM_GENERIC_BITOPS___FLS_H_
+
+#include <asm/types.h>
+
+/**
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static __always_inline unsigned long __fls(unsigned long word)
+{
+	int num = BITS_PER_LONG - 1;
+
+#if BITS_PER_LONG == 64
+	if (!(word & (~0ul << 32))) {
+		num -= 32;
+		word <<= 32;
+	}
+#endif
+	if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
+		num -= 16;
+		word <<= 16;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
+		num -= 8;
+		word <<= 8;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
+		num -= 4;
+		word <<= 4;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
+		num -= 2;
+		word <<= 2;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-1))))
+		num -= 1;
+	return num;
+}
+
+#endif /* _ASM_GENERIC_BITOPS___FLS_H_ */
diff --git a/tools/include/asm-generic/bitops/arch_hweight.h b/tools/include/asm-generic/bitops/arch_hweight.h
new file mode 100644
index 000000000..c2705e1d2
--- /dev/null
+++ b/tools/include/asm-generic/bitops/arch_hweight.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_GENERIC_BITOPS_ARCH_HWEIGHT_H_
+#define _ASM_GENERIC_BITOPS_ARCH_HWEIGHT_H_
+
+#include <asm/types.h>
+
+static inline unsigned int __arch_hweight32(unsigned int w)
+{
+	return __sw_hweight32(w);
+}
+
+static inline unsigned int __arch_hweight16(unsigned int w)
+{
+	return __sw_hweight16(w);
+}
+
+static inline unsigned int __arch_hweight8(unsigned int w)
+{
+	return __sw_hweight8(w);
+}
+
+static inline unsigned long __arch_hweight64(__u64 w)
+{
+	return __sw_hweight64(w);
+}
+#endif /* _ASM_GENERIC_BITOPS_HWEIGHT_H_ */
diff --git a/tools/include/asm-generic/bitops/atomic.h b/tools/include/asm-generic/bitops/atomic.h
new file mode 100644
index 000000000..21c41ccd1
--- /dev/null
+++ b/tools/include/asm-generic/bitops/atomic.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_ASM_GENERIC_BITOPS_ATOMIC_H_
+#define _TOOLS_LINUX_ASM_GENERIC_BITOPS_ATOMIC_H_
+
+#include <asm/types.h>
+#include <asm/bitsperlong.h>
+
+static inline void set_bit(int nr, unsigned long *addr)
+{
+	addr[nr / __BITS_PER_LONG] |= 1UL << (nr % __BITS_PER_LONG);
+}
+
+static inline void clear_bit(int nr, unsigned long *addr)
+{
+	addr[nr / __BITS_PER_LONG] &= ~(1UL << (nr % __BITS_PER_LONG));
+}
+
+static __always_inline int test_bit(unsigned int nr, const unsigned long *addr)
+{
+	return ((1UL << (nr % __BITS_PER_LONG)) &
+		(((unsigned long *)addr)[nr / __BITS_PER_LONG])) != 0;
+}
+
+#define __set_bit(nr, addr)	set_bit(nr, addr)
+#define __clear_bit(nr, addr)	clear_bit(nr, addr)
+
+#endif /* _TOOLS_LINUX_ASM_GENERIC_BITOPS_ATOMIC_H_ */
diff --git a/tools/include/asm-generic/bitops/const_hweight.h b/tools/include/asm-generic/bitops/const_hweight.h
new file mode 100644
index 000000000..149faeeee
--- /dev/null
+++ b/tools/include/asm-generic/bitops/const_hweight.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_GENERIC_BITOPS_CONST_HWEIGHT_H_
+#define _ASM_GENERIC_BITOPS_CONST_HWEIGHT_H_
+
+/*
+ * Compile time versions of __arch_hweightN()
+ */
+#define __const_hweight8(w)		\
+	((unsigned int)			\
+	 ((!!((w) & (1ULL << 0))) +	\
+	  (!!((w) & (1ULL << 1))) +	\
+	  (!!((w) & (1ULL << 2))) +	\
+	  (!!((w) & (1ULL << 3))) +	\
+	  (!!((w) & (1ULL << 4))) +	\
+	  (!!((w) & (1ULL << 5))) +	\
+	  (!!((w) & (1ULL << 6))) +	\
+	  (!!((w) & (1ULL << 7)))))
+
+#define __const_hweight16(w) (__const_hweight8(w)  + __const_hweight8((w)  >> 8 ))
+#define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16))
+#define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
+
+/*
+ * Generic interface.
+ */
+#define hweight8(w)  (__builtin_constant_p(w) ? __const_hweight8(w)  : __arch_hweight8(w))
+#define hweight16(w) (__builtin_constant_p(w) ? __const_hweight16(w) : __arch_hweight16(w))
+#define hweight32(w) (__builtin_constant_p(w) ? __const_hweight32(w) : __arch_hweight32(w))
+#define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w))
+
+/*
+ * Interface for known constant arguments
+ */
+#define HWEIGHT8(w)  (BUILD_BUG_ON_ZERO(!__builtin_constant_p(w)) + __const_hweight8(w))
+#define HWEIGHT16(w) (BUILD_BUG_ON_ZERO(!__builtin_constant_p(w)) + __const_hweight16(w))
+#define HWEIGHT32(w) (BUILD_BUG_ON_ZERO(!__builtin_constant_p(w)) + __const_hweight32(w))
+#define HWEIGHT64(w) (BUILD_BUG_ON_ZERO(!__builtin_constant_p(w)) + __const_hweight64(w))
+
+/*
+ * Type invariant interface to the compile time constant hweight functions.
+ */
+#define HWEIGHT(w)   HWEIGHT64((u64)w)
+
+#endif /* _ASM_GENERIC_BITOPS_CONST_HWEIGHT_H_ */
diff --git a/tools/include/asm-generic/bitops/find.h b/tools/include/asm-generic/bitops/find.h
new file mode 100644
index 000000000..16ed1982c
--- /dev/null
+++ b/tools/include/asm-generic/bitops/find.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_ASM_GENERIC_BITOPS_FIND_H_
+#define _TOOLS_LINUX_ASM_GENERIC_BITOPS_FIND_H_
+
+#ifndef find_next_bit
+/**
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The bitmap size in bits
+ *
+ * Returns the bit number for the next set bit
+ * If no bits are set, returns @size.
+ */
+extern unsigned long find_next_bit(const unsigned long *addr, unsigned long
+		size, unsigned long offset);
+#endif
+
+#ifndef find_next_and_bit
+/**
+ * find_next_and_bit - find the next set bit in both memory regions
+ * @addr1: The first address to base the search on
+ * @addr2: The second address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The bitmap size in bits
+ *
+ * Returns the bit number for the next set bit
+ * If no bits are set, returns @size.
+ */
+extern unsigned long find_next_and_bit(const unsigned long *addr1,
+		const unsigned long *addr2, unsigned long size,
+		unsigned long offset);
+#endif
+
+#ifndef find_next_zero_bit
+
+/**
+ * find_next_zero_bit - find the next cleared bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The bitmap size in bits
+ *
+ * Returns the bit number of the next zero bit
+ * If no bits are zero, returns @size.
+ */
+unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size,
+				 unsigned long offset);
+#endif
+
+#ifndef find_first_bit
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum number of bits to search
+ *
+ * Returns the bit number of the first set bit.
+ * If no bits are set, returns @size.
+ */
+extern unsigned long find_first_bit(const unsigned long *addr,
+				    unsigned long size);
+
+#endif /* find_first_bit */
+
+#ifndef find_first_zero_bit
+
+/**
+ * find_first_zero_bit - find the first cleared bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum number of bits to search
+ *
+ * Returns the bit number of the first cleared bit.
+ * If no bits are zero, returns @size.
+ */
+unsigned long find_first_zero_bit(const unsigned long *addr, unsigned long size);
+#endif
+
+#endif /*_TOOLS_LINUX_ASM_GENERIC_BITOPS_FIND_H_ */
diff --git a/tools/include/asm-generic/bitops/fls.h b/tools/include/asm-generic/bitops/fls.h
new file mode 100644
index 000000000..753aecaab
--- /dev/null
+++ b/tools/include/asm-generic/bitops/fls.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_GENERIC_BITOPS_FLS_H_
+#define _ASM_GENERIC_BITOPS_FLS_H_
+
+/**
+ * fls - find last (most-significant) bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+
+static __always_inline int fls(int x)
+{
+	int r = 32;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff0000u)) {
+		x <<= 16;
+		r -= 16;
+	}
+	if (!(x & 0xff000000u)) {
+		x <<= 8;
+		r -= 8;
+	}
+	if (!(x & 0xf0000000u)) {
+		x <<= 4;
+		r -= 4;
+	}
+	if (!(x & 0xc0000000u)) {
+		x <<= 2;
+		r -= 2;
+	}
+	if (!(x & 0x80000000u)) {
+		x <<= 1;
+		r -= 1;
+	}
+	return r;
+}
+
+#endif /* _ASM_GENERIC_BITOPS_FLS_H_ */
diff --git a/tools/include/asm-generic/bitops/fls64.h b/tools/include/asm-generic/bitops/fls64.h
new file mode 100644
index 000000000..866f2b230
--- /dev/null
+++ b/tools/include/asm-generic/bitops/fls64.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_GENERIC_BITOPS_FLS64_H_
+#define _ASM_GENERIC_BITOPS_FLS64_H_
+
+#include <asm/types.h>
+
+/**
+ * fls64 - find last set bit in a 64-bit word
+ * @x: the word to search
+ *
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffsll, but returns the position of the most significant set bit.
+ *
+ * fls64(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 64.
+ */
+#if BITS_PER_LONG == 32
+static __always_inline int fls64(__u64 x)
+{
+	__u32 h = x >> 32;
+	if (h)
+		return fls(h) + 32;
+	return fls(x);
+}
+#elif BITS_PER_LONG == 64
+static __always_inline int fls64(__u64 x)
+{
+	if (x == 0)
+		return 0;
+	return __fls(x) + 1;
+}
+#else
+#error BITS_PER_LONG not 32 or 64
+#endif
+
+#endif /* _ASM_GENERIC_BITOPS_FLS64_H_ */
diff --git a/tools/include/asm-generic/bitops/hweight.h b/tools/include/asm-generic/bitops/hweight.h
new file mode 100644
index 000000000..3e681982b
--- /dev/null
+++ b/tools/include/asm-generic/bitops/hweight.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_ASM_GENERIC_BITOPS_HWEIGHT_H_
+#define _TOOLS_LINUX_ASM_GENERIC_BITOPS_HWEIGHT_H_
+
+#include <asm-generic/bitops/arch_hweight.h>
+#include <asm-generic/bitops/const_hweight.h>
+
+#endif /* _TOOLS_LINUX_ASM_GENERIC_BITOPS_HWEIGHT_H_ */
diff --git a/tools/include/asm-generic/bitsperlong.h b/tools/include/asm-generic/bitsperlong.h
new file mode 100644
index 000000000..8f2283052
--- /dev/null
+++ b/tools/include/asm-generic/bitsperlong.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_GENERIC_BITS_PER_LONG
+#define __ASM_GENERIC_BITS_PER_LONG
+
+#include <uapi/asm-generic/bitsperlong.h>
+
+#ifdef __SIZEOF_LONG__
+#define BITS_PER_LONG (__CHAR_BIT__ * __SIZEOF_LONG__)
+#else
+#define BITS_PER_LONG __WORDSIZE
+#endif
+
+#if BITS_PER_LONG != __BITS_PER_LONG
+#error Inconsistent word size. Check asm/bitsperlong.h
+#endif
+
+#ifndef BITS_PER_LONG_LONG
+#define BITS_PER_LONG_LONG 64
+#endif
+
+#endif /* __ASM_GENERIC_BITS_PER_LONG */
diff --git a/tools/include/asm-generic/hugetlb_encode.h b/tools/include/asm-generic/hugetlb_encode.h
new file mode 100644
index 000000000..e4732d3c2
--- /dev/null
+++ b/tools/include/asm-generic/hugetlb_encode.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_GENERIC_HUGETLB_ENCODE_H_
+#define _ASM_GENERIC_HUGETLB_ENCODE_H_
+
+/*
+ * Several system calls take a flag to request "hugetlb" huge pages.
+ * Without further specification, these system calls will use the
+ * system's default huge page size.  If a system supports multiple
+ * huge page sizes, the desired huge page size can be specified in
+ * bits [26:31] of the flag arguments.  The value in these 6 bits
+ * will encode the log2 of the huge page size.
+ *
+ * The following definitions are associated with this huge page size
+ * encoding in flag arguments.  System call specific header files
+ * that use this encoding should include this file.  They can then
+ * provide definitions based on these with their own specific prefix.
+ * for example:
+ * #define MAP_HUGE_SHIFT HUGETLB_FLAG_ENCODE_SHIFT
+ */
+
+#define HUGETLB_FLAG_ENCODE_SHIFT	26
+#define HUGETLB_FLAG_ENCODE_MASK	0x3f
+
+#define HUGETLB_FLAG_ENCODE_64KB	(16 << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_512KB	(19 << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_1MB		(20 << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_2MB		(21 << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_8MB		(23 << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_16MB	(24 << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_256MB	(28 << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_1GB		(30 << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_2GB		(31 << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_16GB	(34 << HUGETLB_FLAG_ENCODE_SHIFT)
+
+#endif /* _ASM_GENERIC_HUGETLB_ENCODE_H_ */
diff --git a/tools/include/asm/alternative-asm.h b/tools/include/asm/alternative-asm.h
new file mode 100644
index 000000000..b54bd860d
--- /dev/null
+++ b/tools/include/asm/alternative-asm.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_ASM_ALTERNATIVE_ASM_H
+#define _TOOLS_ASM_ALTERNATIVE_ASM_H
+
+/* Just disable it so we can build arch/x86/lib/memcpy_64.S for perf bench: */
+
+#define altinstruction_entry #
+#define ALTERNATIVE_2 #
+
+#endif
diff --git a/tools/include/asm/atomic.h b/tools/include/asm/atomic.h
new file mode 100644
index 000000000..8c9bfffd4
--- /dev/null
+++ b/tools/include/asm/atomic.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __TOOLS_LINUX_ASM_ATOMIC_H
+#define __TOOLS_LINUX_ASM_ATOMIC_H
+
+#if defined(__i386__) || defined(__x86_64__)
+#include "../../arch/x86/include/asm/atomic.h"
+#else
+#include <asm-generic/atomic-gcc.h>
+#endif
+
+#endif /* __TOOLS_LINUX_ASM_ATOMIC_H */
diff --git a/tools/include/asm/barrier.h b/tools/include/asm/barrier.h
new file mode 100644
index 000000000..391d94253
--- /dev/null
+++ b/tools/include/asm/barrier.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if defined(__i386__) || defined(__x86_64__)
+#include "../../arch/x86/include/asm/barrier.h"
+#elif defined(__arm__)
+#include "../../arch/arm/include/asm/barrier.h"
+#elif defined(__aarch64__)
+#include "../../arch/arm64/include/asm/barrier.h"
+#elif defined(__powerpc__)
+#include "../../arch/powerpc/include/asm/barrier.h"
+#elif defined(__s390__)
+#include "../../arch/s390/include/asm/barrier.h"
+#elif defined(__sh__)
+#include "../../arch/sh/include/asm/barrier.h"
+#elif defined(__sparc__)
+#include "../../arch/sparc/include/asm/barrier.h"
+#elif defined(__tile__)
+#include "../../arch/tile/include/asm/barrier.h"
+#elif defined(__alpha__)
+#include "../../arch/alpha/include/asm/barrier.h"
+#elif defined(__mips__)
+#include "../../arch/mips/include/asm/barrier.h"
+#elif defined(__ia64__)
+#include "../../arch/ia64/include/asm/barrier.h"
+#elif defined(__xtensa__)
+#include "../../arch/xtensa/include/asm/barrier.h"
+#else
+#include <asm-generic/barrier.h>
+#endif
diff --git a/tools/include/asm/bug.h b/tools/include/asm/bug.h
new file mode 100644
index 000000000..bbd75ac8b
--- /dev/null
+++ b/tools/include/asm/bug.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_ASM_BUG_H
+#define _TOOLS_ASM_BUG_H
+
+#include <linux/compiler.h>
+
+#define __WARN_printf(arg...)	do { fprintf(stderr, arg); } while (0)
+
+#define WARN(condition, format...) ({		\
+	int __ret_warn_on = !!(condition);	\
+	if (unlikely(__ret_warn_on))		\
+		__WARN_printf(format);		\
+	unlikely(__ret_warn_on);		\
+})
+
+#define WARN_ON(condition) ({					\
+	int __ret_warn_on = !!(condition);			\
+	if (unlikely(__ret_warn_on))				\
+		__WARN_printf("assertion failed at %s:%d\n",	\
+				__FILE__, __LINE__);		\
+	unlikely(__ret_warn_on);				\
+})
+
+#define WARN_ON_ONCE(condition) ({			\
+	static int __warned;				\
+	int __ret_warn_once = !!(condition);		\
+							\
+	if (unlikely(__ret_warn_once && !__warned)) {	\
+		__warned = true;			\
+		WARN_ON(1);				\
+	}						\
+	unlikely(__ret_warn_once);			\
+})
+
+#define WARN_ONCE(condition, format...)	({	\
+	static int __warned;			\
+	int __ret_warn_once = !!(condition);	\
+						\
+	if (unlikely(__ret_warn_once))		\
+		if (WARN(!__warned, format)) 	\
+			__warned = 1;		\
+	unlikely(__ret_warn_once);		\
+})
+
+#endif /* _TOOLS_ASM_BUG_H */
diff --git a/tools/include/asm/export.h b/tools/include/asm/export.h
new file mode 100644
index 000000000..2cb1a0d83
--- /dev/null
+++ b/tools/include/asm/export.h
@@ -0,0 +1,7 @@
+#ifndef _TOOLS_ASM_EXPORT_H
+#define _TOOLS_ASM_EXPORT_H
+
+#define EXPORT_SYMBOL(x)
+#define EXPORT_SYMBOL_GPL(x)
+
+#endif /* _TOOLS_ASM_EXPORT_H */
diff --git a/tools/include/asm/sections.h b/tools/include/asm/sections.h
new file mode 100644
index 000000000..a80643d7a
--- /dev/null
+++ b/tools/include/asm/sections.h
@@ -0,0 +1,4 @@
+#ifndef __TOOLS_INCLUDE_LINUX_ASM_SECTIONS_H
+#define __TOOLS_INCLUDE_LINUX_ASM_SECTIONS_H
+
+#endif /* __TOOLS_INCLUDE_LINUX_ASM_SECTIONS_H */
diff --git a/tools/include/linux/atomic.h b/tools/include/linux/atomic.h
new file mode 100644
index 000000000..00a6c4ca5
--- /dev/null
+++ b/tools/include/linux/atomic.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __TOOLS_LINUX_ATOMIC_H
+#define __TOOLS_LINUX_ATOMIC_H
+
+#include <asm/atomic.h>
+
+/* atomic_cmpxchg_relaxed */
+#ifndef atomic_cmpxchg_relaxed
+#define  atomic_cmpxchg_relaxed		atomic_cmpxchg
+#define  atomic_cmpxchg_release         atomic_cmpxchg
+#endif /* atomic_cmpxchg_relaxed */
+
+#endif /* __TOOLS_LINUX_ATOMIC_H */
diff --git a/tools/include/linux/bitmap.h b/tools/include/linux/bitmap.h
new file mode 100644
index 000000000..e63662db1
--- /dev/null
+++ b/tools/include/linux/bitmap.h
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _PERF_BITOPS_H
+#define _PERF_BITOPS_H
+
+#include <string.h>
+#include <linux/bitops.h>
+#include <stdlib.h>
+#include <linux/kernel.h>
+
+#define DECLARE_BITMAP(name,bits) \
+	unsigned long name[BITS_TO_LONGS(bits)]
+
+int __bitmap_weight(const unsigned long *bitmap, int bits);
+void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1,
+		 const unsigned long *bitmap2, int bits);
+int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
+		 const unsigned long *bitmap2, unsigned int bits);
+
+#define BITMAP_FIRST_WORD_MASK(start) (~0UL << ((start) & (BITS_PER_LONG - 1)))
+
+#define BITMAP_LAST_WORD_MASK(nbits)					\
+(									\
+	((nbits) % BITS_PER_LONG) ?					\
+		(1UL<<((nbits) % BITS_PER_LONG))-1 : ~0UL		\
+)
+
+#define small_const_nbits(nbits) \
+	(__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG)
+
+static inline void bitmap_zero(unsigned long *dst, int nbits)
+{
+	if (small_const_nbits(nbits))
+		*dst = 0UL;
+	else {
+		int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
+		memset(dst, 0, len);
+	}
+}
+
+static inline void bitmap_fill(unsigned long *dst, unsigned int nbits)
+{
+	unsigned int nlongs = BITS_TO_LONGS(nbits);
+	if (!small_const_nbits(nbits)) {
+		unsigned int len = (nlongs - 1) * sizeof(unsigned long);
+		memset(dst, 0xff,  len);
+	}
+	dst[nlongs - 1] = BITMAP_LAST_WORD_MASK(nbits);
+}
+
+static inline int bitmap_empty(const unsigned long *src, unsigned nbits)
+{
+	if (small_const_nbits(nbits))
+		return ! (*src & BITMAP_LAST_WORD_MASK(nbits));
+
+	return find_first_bit(src, nbits) == nbits;
+}
+
+static inline int bitmap_full(const unsigned long *src, unsigned int nbits)
+{
+	if (small_const_nbits(nbits))
+		return ! (~(*src) & BITMAP_LAST_WORD_MASK(nbits));
+
+	return find_first_zero_bit(src, nbits) == nbits;
+}
+
+static inline int bitmap_weight(const unsigned long *src, int nbits)
+{
+	if (small_const_nbits(nbits))
+		return hweight_long(*src & BITMAP_LAST_WORD_MASK(nbits));
+	return __bitmap_weight(src, nbits);
+}
+
+static inline void bitmap_or(unsigned long *dst, const unsigned long *src1,
+			     const unsigned long *src2, int nbits)
+{
+	if (small_const_nbits(nbits))
+		*dst = *src1 | *src2;
+	else
+		__bitmap_or(dst, src1, src2, nbits);
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+static inline int test_and_set_bit(int nr, unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+
+	old = *p;
+	*p = old | mask;
+
+	return (old & mask) != 0;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ */
+static inline int test_and_clear_bit(int nr, unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+
+	old = *p;
+	*p = old & ~mask;
+
+	return (old & mask) != 0;
+}
+
+/**
+ * bitmap_alloc - Allocate bitmap
+ * @nbits: Number of bits
+ */
+static inline unsigned long *bitmap_alloc(int nbits)
+{
+	return calloc(1, BITS_TO_LONGS(nbits) * sizeof(unsigned long));
+}
+
+/*
+ * bitmap_scnprintf - print bitmap list into buffer
+ * @bitmap: bitmap
+ * @nbits: size of bitmap
+ * @buf: buffer to store output
+ * @size: size of @buf
+ */
+size_t bitmap_scnprintf(unsigned long *bitmap, int nbits,
+			char *buf, size_t size);
+
+/**
+ * bitmap_and - Do logical and on bitmaps
+ * @dst: resulting bitmap
+ * @src1: operand 1
+ * @src2: operand 2
+ * @nbits: size of bitmap
+ */
+static inline int bitmap_and(unsigned long *dst, const unsigned long *src1,
+			     const unsigned long *src2, unsigned int nbits)
+{
+	if (small_const_nbits(nbits))
+		return (*dst = *src1 & *src2 & BITMAP_LAST_WORD_MASK(nbits)) != 0;
+	return __bitmap_and(dst, src1, src2, nbits);
+}
+
+#endif /* _PERF_BITOPS_H */
diff --git a/tools/include/linux/bitops.h b/tools/include/linux/bitops.h
new file mode 100644
index 000000000..0b0ef3abc
--- /dev/null
+++ b/tools/include/linux/bitops.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_BITOPS_H_
+#define _TOOLS_LINUX_BITOPS_H_
+
+#include <asm/types.h>
+#ifndef __WORDSIZE
+#define __WORDSIZE (__SIZEOF_LONG__ * 8)
+#endif
+
+#ifndef BITS_PER_LONG
+# define BITS_PER_LONG __WORDSIZE
+#endif
+#include <linux/bits.h>
+#include <linux/compiler.h>
+
+#define BITS_TO_LONGS(nr)	DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#define BITS_TO_U64(nr)		DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u64))
+#define BITS_TO_U32(nr)		DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u32))
+#define BITS_TO_BYTES(nr)	DIV_ROUND_UP(nr, BITS_PER_BYTE)
+
+extern unsigned int __sw_hweight8(unsigned int w);
+extern unsigned int __sw_hweight16(unsigned int w);
+extern unsigned int __sw_hweight32(unsigned int w);
+extern unsigned long __sw_hweight64(__u64 w);
+
+/*
+ * Include this here because some architectures need generic_ffs/fls in
+ * scope
+ *
+ * XXX: this needs to be asm/bitops.h, when we get to per arch optimizations
+ */
+#include <asm-generic/bitops.h>
+
+#define for_each_set_bit(bit, addr, size) \
+	for ((bit) = find_first_bit((addr), (size));		\
+	     (bit) < (size);					\
+	     (bit) = find_next_bit((addr), (size), (bit) + 1))
+
+#define for_each_clear_bit(bit, addr, size) \
+	for ((bit) = find_first_zero_bit((addr), (size));       \
+	     (bit) < (size);                                    \
+	     (bit) = find_next_zero_bit((addr), (size), (bit) + 1))
+
+/* same as for_each_set_bit() but use bit as value to start with */
+#define for_each_set_bit_from(bit, addr, size) \
+	for ((bit) = find_next_bit((addr), (size), (bit));	\
+	     (bit) < (size);					\
+	     (bit) = find_next_bit((addr), (size), (bit) + 1))
+
+static inline unsigned long hweight_long(unsigned long w)
+{
+	return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
+}
+
+static inline unsigned fls_long(unsigned long l)
+{
+	if (sizeof(l) == 4)
+		return fls(l);
+	return fls64(l);
+}
+
+/**
+ * rol32 - rotate a 32-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u32 rol32(__u32 word, unsigned int shift)
+{
+	return (word << shift) | (word >> ((-shift) & 31));
+}
+
+#endif
diff --git a/tools/include/linux/bits.h b/tools/include/linux/bits.h
new file mode 100644
index 000000000..2b7b532c1
--- /dev/null
+++ b/tools/include/linux/bits.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_BITS_H
+#define __LINUX_BITS_H
+#include <asm/bitsperlong.h>
+
+#define BIT(nr)			(1UL << (nr))
+#define BIT_ULL(nr)		(1ULL << (nr))
+#define BIT_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
+#define BIT_WORD(nr)		((nr) / BITS_PER_LONG)
+#define BIT_ULL_MASK(nr)	(1ULL << ((nr) % BITS_PER_LONG_LONG))
+#define BIT_ULL_WORD(nr)	((nr) / BITS_PER_LONG_LONG)
+#define BITS_PER_BYTE		8
+
+/*
+ * Create a contiguous bitmask starting at bit position @l and ending at
+ * position @h. For example
+ * GENMASK_ULL(39, 21) gives us the 64bit vector 0x000000ffffe00000.
+ */
+#define GENMASK(h, l) \
+	(((~0UL) - (1UL << (l)) + 1) & (~0UL >> (BITS_PER_LONG - 1 - (h))))
+
+#define GENMASK_ULL(h, l) \
+	(((~0ULL) - (1ULL << (l)) + 1) & \
+	 (~0ULL >> (BITS_PER_LONG_LONG - 1 - (h))))
+
+#endif	/* __LINUX_BITS_H */
diff --git a/tools/include/linux/bug.h b/tools/include/linux/bug.h
new file mode 100644
index 000000000..85f80258a
--- /dev/null
+++ b/tools/include/linux/bug.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_PERF_LINUX_BUG_H
+#define _TOOLS_PERF_LINUX_BUG_H
+
+/* Force a compilation error if condition is true, but also produce a
+   result (of value 0 and type size_t), so the expression can be used
+   e.g. in a structure initializer (or where-ever else comma expressions
+   aren't permitted). */
+#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
+
+#endif	/* _TOOLS_PERF_LINUX_BUG_H */
diff --git a/tools/include/linux/compiler-gcc.h b/tools/include/linux/compiler-gcc.h
new file mode 100644
index 000000000..0d35f1800
--- /dev/null
+++ b/tools/include/linux/compiler-gcc.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_COMPILER_H_
+#error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
+#endif
+
+/*
+ * Common definitions for all gcc versions go here.
+ */
+#define GCC_VERSION (__GNUC__ * 10000		\
+		     + __GNUC_MINOR__ * 100	\
+		     + __GNUC_PATCHLEVEL__)
+
+#if GCC_VERSION >= 70000 && !defined(__CHECKER__)
+# define __fallthrough __attribute__ ((fallthrough))
+#endif
+
+#if GCC_VERSION >= 40300
+# define __compiletime_error(message) __attribute__((error(message)))
+#endif /* GCC_VERSION >= 40300 */
+
+/* &a[0] degrades to a pointer: a different type from an array */
+#define __must_be_array(a)	BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0]))
+
+#ifndef __pure
+#define  __pure		__attribute__((pure))
+#endif
+#define  noinline	__attribute__((noinline))
+#ifndef __packed
+#define __packed	__attribute__((packed))
+#endif
+#ifndef __noreturn
+#define __noreturn	__attribute__((noreturn))
+#endif
+#ifndef __aligned
+#define __aligned(x)	__attribute__((aligned(x)))
+#endif
+#define __printf(a, b)	__attribute__((format(printf, a, b)))
+#define __scanf(a, b)	__attribute__((format(scanf, a, b)))
+
+#if GCC_VERSION >= 50100
+#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
+#endif
diff --git a/tools/include/linux/compiler.h b/tools/include/linux/compiler.h
new file mode 100644
index 000000000..1827c2f97
--- /dev/null
+++ b/tools/include/linux/compiler.h
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_COMPILER_H_
+#define _TOOLS_LINUX_COMPILER_H_
+
+#ifdef __GNUC__
+#include <linux/compiler-gcc.h>
+#endif
+
+#ifndef __compiletime_error
+# define __compiletime_error(message)
+#endif
+
+/* Optimization barrier */
+/* The "volatile" is due to gcc bugs */
+#define barrier() __asm__ __volatile__("": : :"memory")
+
+#ifndef __always_inline
+# define __always_inline	inline __attribute__((always_inline))
+#endif
+
+#ifndef noinline
+#define noinline
+#endif
+
+/* Are two types/vars the same type (ignoring qualifiers)? */
+#ifndef __same_type
+# define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
+#endif
+
+#ifdef __ANDROID__
+/*
+ * FIXME: Big hammer to get rid of tons of:
+ *   "warning: always_inline function might not be inlinable"
+ *
+ * At least on android-ndk-r12/platforms/android-24/arch-arm
+ */
+#undef __always_inline
+#define __always_inline	inline
+#endif
+
+#define __user
+#define __rcu
+#define __read_mostly
+
+#ifndef __attribute_const__
+# define __attribute_const__
+#endif
+
+#ifndef __maybe_unused
+# define __maybe_unused		__attribute__((unused))
+#endif
+
+#ifndef __used
+# define __used		__attribute__((__unused__))
+#endif
+
+#ifndef __packed
+# define __packed		__attribute__((__packed__))
+#endif
+
+#ifndef __force
+# define __force
+#endif
+
+#ifndef __weak
+# define __weak			__attribute__((weak))
+#endif
+
+#ifndef likely
+# define likely(x)		__builtin_expect(!!(x), 1)
+#endif
+
+#ifndef unlikely
+# define unlikely(x)		__builtin_expect(!!(x), 0)
+#endif
+
+#ifndef __init
+# define __init
+#endif
+
+#ifndef noinline
+# define noinline
+#endif
+
+#define uninitialized_var(x) x = *(&(x))
+
+#include <linux/types.h>
+
+/*
+ * Following functions are taken from kernel sources and
+ * break aliasing rules in their original form.
+ *
+ * While kernel is compiled with -fno-strict-aliasing,
+ * perf uses -Wstrict-aliasing=3 which makes build fail
+ * under gcc 4.4.
+ *
+ * Using extra __may_alias__ type to allow aliasing
+ * in this case.
+ */
+typedef __u8  __attribute__((__may_alias__))  __u8_alias_t;
+typedef __u16 __attribute__((__may_alias__)) __u16_alias_t;
+typedef __u32 __attribute__((__may_alias__)) __u32_alias_t;
+typedef __u64 __attribute__((__may_alias__)) __u64_alias_t;
+
+static __always_inline void __read_once_size(const volatile void *p, void *res, int size)
+{
+	switch (size) {
+	case 1: *(__u8_alias_t  *) res = *(volatile __u8_alias_t  *) p; break;
+	case 2: *(__u16_alias_t *) res = *(volatile __u16_alias_t *) p; break;
+	case 4: *(__u32_alias_t *) res = *(volatile __u32_alias_t *) p; break;
+	case 8: *(__u64_alias_t *) res = *(volatile __u64_alias_t *) p; break;
+	default:
+		barrier();
+		__builtin_memcpy((void *)res, (const void *)p, size);
+		barrier();
+	}
+}
+
+static __always_inline void __write_once_size(volatile void *p, void *res, int size)
+{
+	switch (size) {
+	case 1: *(volatile  __u8_alias_t *) p = *(__u8_alias_t  *) res; break;
+	case 2: *(volatile __u16_alias_t *) p = *(__u16_alias_t *) res; break;
+	case 4: *(volatile __u32_alias_t *) p = *(__u32_alias_t *) res; break;
+	case 8: *(volatile __u64_alias_t *) p = *(__u64_alias_t *) res; break;
+	default:
+		barrier();
+		__builtin_memcpy((void *)p, (const void *)res, size);
+		barrier();
+	}
+}
+
+/*
+ * Prevent the compiler from merging or refetching reads or writes. The
+ * compiler is also forbidden from reordering successive instances of
+ * READ_ONCE and WRITE_ONCE, but only when the compiler is aware of some
+ * particular ordering. One way to make the compiler aware of ordering is to
+ * put the two invocations of READ_ONCE or WRITE_ONCE in different C
+ * statements.
+ *
+ * These two macros will also work on aggregate data types like structs or
+ * unions. If the size of the accessed data type exceeds the word size of
+ * the machine (e.g., 32 bits or 64 bits) READ_ONCE() and WRITE_ONCE() will
+ * fall back to memcpy and print a compile-time warning.
+ *
+ * Their two major use cases are: (1) Mediating communication between
+ * process-level code and irq/NMI handlers, all running on the same CPU,
+ * and (2) Ensuring that the compiler does not fold, spindle, or otherwise
+ * mutilate accesses that either do not require ordering or that interact
+ * with an explicit memory barrier or atomic instruction that provides the
+ * required ordering.
+ */
+
+#define READ_ONCE(x)					\
+({							\
+	union { typeof(x) __val; char __c[1]; } __u =	\
+		{ .__c = { 0 } };			\
+	__read_once_size(&(x), __u.__c, sizeof(x));	\
+	__u.__val;					\
+})
+
+#define WRITE_ONCE(x, val)				\
+({							\
+	union { typeof(x) __val; char __c[1]; } __u =	\
+		{ .__val = (val) }; 			\
+	__write_once_size(&(x), __u.__c, sizeof(x));	\
+	__u.__val;					\
+})
+
+
+#ifndef __fallthrough
+# define __fallthrough
+#endif
+
+#endif /* _TOOLS_LINUX_COMPILER_H */
diff --git a/tools/include/linux/coresight-pmu.h b/tools/include/linux/coresight-pmu.h
new file mode 100644
index 000000000..a1a959ba2
--- /dev/null
+++ b/tools/include/linux/coresight-pmu.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright(C) 2015 Linaro Limited. All rights reserved.
+ * Author: Mathieu Poirier <mathieu.poirier@linaro.org>
+ */
+
+#ifndef _LINUX_CORESIGHT_PMU_H
+#define _LINUX_CORESIGHT_PMU_H
+
+#define CORESIGHT_ETM_PMU_NAME "cs_etm"
+#define CORESIGHT_ETM_PMU_SEED  0x10
+
+/* ETMv3.5/PTM's ETMCR config bit */
+#define ETM_OPT_CYCACC  12
+#define ETM_OPT_TS      28
+#define ETM_OPT_RETSTK	29
+
+/* ETMv4 CONFIGR programming bits for the ETM OPTs */
+#define ETM4_CFG_BIT_CYCACC	4
+#define ETM4_CFG_BIT_TS		11
+#define ETM4_CFG_BIT_RETSTK	12
+
+static inline int coresight_get_trace_id(int cpu)
+{
+	/*
+	 * A trace ID of value 0 is invalid, so let's start at some
+	 * random value that fits in 7 bits and go from there.  Since
+	 * the common convention is to have data trace IDs be I(N) + 1,
+	 * set instruction trace IDs as a function of the CPU number.
+	 */
+	return (CORESIGHT_ETM_PMU_SEED + (cpu * 2));
+}
+
+#endif
diff --git a/tools/include/linux/debug_locks.h b/tools/include/linux/debug_locks.h
new file mode 100644
index 000000000..72d595ce7
--- /dev/null
+++ b/tools/include/linux/debug_locks.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LIBLOCKDEP_DEBUG_LOCKS_H_
+#define _LIBLOCKDEP_DEBUG_LOCKS_H_
+
+#include <stddef.h>
+#include <linux/compiler.h>
+#include <asm/bug.h>
+
+#define DEBUG_LOCKS_WARN_ON(x) WARN_ON(x)
+
+extern bool debug_locks;
+extern bool debug_locks_silent;
+
+#endif
diff --git a/tools/include/linux/delay.h b/tools/include/linux/delay.h
new file mode 100644
index 000000000..55aa4173a
--- /dev/null
+++ b/tools/include/linux/delay.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_INCLUDE_LINUX_DELAY_H
+#define _TOOLS_INCLUDE_LINUX_DELAY_H
+
+#endif /* _TOOLS_INCLUDE_LINUX_DELAY_H */
diff --git a/tools/include/linux/err.h b/tools/include/linux/err.h
new file mode 100644
index 000000000..7a8b61ad4
--- /dev/null
+++ b/tools/include/linux/err.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __TOOLS_LINUX_ERR_H
+#define __TOOLS_LINUX_ERR_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#include <asm/errno.h>
+
+/*
+ * Original kernel header comment:
+ *
+ * Kernel pointers have redundant information, so we can use a
+ * scheme where we can return either an error code or a normal
+ * pointer with the same return value.
+ *
+ * This should be a per-architecture thing, to allow different
+ * error and pointer decisions.
+ *
+ * Userspace note:
+ * The same principle works for userspace, because 'error' pointers
+ * fall down to the unused hole far from user space, as described
+ * in Documentation/x86/x86_64/mm.txt for x86_64 arch:
+ *
+ * 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm hole caused by [48:63] sign extension
+ * ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
+ *
+ * It should be the same case for other architectures, because
+ * this code is used in generic kernel code.
+ */
+#define MAX_ERRNO	4095
+
+#define IS_ERR_VALUE(x) unlikely((x) >= (unsigned long)-MAX_ERRNO)
+
+static inline void * __must_check ERR_PTR(long error_)
+{
+	return (void *) error_;
+}
+
+static inline long __must_check PTR_ERR(__force const void *ptr)
+{
+	return (long) ptr;
+}
+
+static inline bool __must_check IS_ERR(__force const void *ptr)
+{
+	return IS_ERR_VALUE((unsigned long)ptr);
+}
+
+static inline bool __must_check IS_ERR_OR_NULL(__force const void *ptr)
+{
+	return unlikely(!ptr) || IS_ERR_VALUE((unsigned long)ptr);
+}
+
+#endif /* _LINUX_ERR_H */
diff --git a/tools/include/linux/export.h b/tools/include/linux/export.h
new file mode 100644
index 000000000..d07e586b9
--- /dev/null
+++ b/tools/include/linux/export.h
@@ -0,0 +1,10 @@
+#ifndef _TOOLS_LINUX_EXPORT_H_
+#define _TOOLS_LINUX_EXPORT_H_
+
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
+#define EXPORT_SYMBOL_GPL_FUTURE(sym)
+#define EXPORT_UNUSED_SYMBOL(sym)
+#define EXPORT_UNUSED_SYMBOL_GPL(sym)
+
+#endif
diff --git a/tools/include/linux/filter.h b/tools/include/linux/filter.h
new file mode 100644
index 000000000..af55acf73
--- /dev/null
+++ b/tools/include/linux/filter.h
@@ -0,0 +1,286 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Linux Socket Filter Data Structures
+ */
+#ifndef __TOOLS_LINUX_FILTER_H
+#define __TOOLS_LINUX_FILTER_H
+
+#include <linux/bpf.h>
+
+/* ArgX, context and stack frame pointer register positions. Note,
+ * Arg1, Arg2, Arg3, etc are used as argument mappings of function
+ * calls in BPF_CALL instruction.
+ */
+#define BPF_REG_ARG1	BPF_REG_1
+#define BPF_REG_ARG2	BPF_REG_2
+#define BPF_REG_ARG3	BPF_REG_3
+#define BPF_REG_ARG4	BPF_REG_4
+#define BPF_REG_ARG5	BPF_REG_5
+#define BPF_REG_CTX	BPF_REG_6
+#define BPF_REG_FP	BPF_REG_10
+
+/* Additional register mappings for converted user programs. */
+#define BPF_REG_A	BPF_REG_0
+#define BPF_REG_X	BPF_REG_7
+#define BPF_REG_TMP	BPF_REG_8
+
+/* BPF program can access up to 512 bytes of stack space. */
+#define MAX_BPF_STACK	512
+
+/* Helper macros for filter block array initializers. */
+
+/* ALU ops on registers, bpf_add|sub|...: dst_reg += src_reg */
+
+#define BPF_ALU64_REG(OP, DST, SRC)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU64 | BPF_OP(OP) | BPF_X,	\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = 0 })
+
+#define BPF_ALU32_REG(OP, DST, SRC)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU | BPF_OP(OP) | BPF_X,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = 0 })
+
+/* ALU ops on immediates, bpf_add|sub|...: dst_reg += imm32 */
+
+#define BPF_ALU64_IMM(OP, DST, IMM)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU64 | BPF_OP(OP) | BPF_K,	\
+		.dst_reg = DST,					\
+		.src_reg = 0,					\
+		.off   = 0,					\
+		.imm   = IMM })
+
+#define BPF_ALU32_IMM(OP, DST, IMM)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU | BPF_OP(OP) | BPF_K,		\
+		.dst_reg = DST,					\
+		.src_reg = 0,					\
+		.off   = 0,					\
+		.imm   = IMM })
+
+/* Endianess conversion, cpu_to_{l,b}e(), {l,b}e_to_cpu() */
+
+#define BPF_ENDIAN(TYPE, DST, LEN)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU | BPF_END | BPF_SRC(TYPE),	\
+		.dst_reg = DST,					\
+		.src_reg = 0,					\
+		.off   = 0,					\
+		.imm   = LEN })
+
+/* Short form of mov, dst_reg = src_reg */
+
+#define BPF_MOV64_REG(DST, SRC)					\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU64 | BPF_MOV | BPF_X,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = 0 })
+
+#define BPF_MOV32_REG(DST, SRC)					\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU | BPF_MOV | BPF_X,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = 0 })
+
+/* Short form of mov, dst_reg = imm32 */
+
+#define BPF_MOV64_IMM(DST, IMM)					\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU64 | BPF_MOV | BPF_K,		\
+		.dst_reg = DST,					\
+		.src_reg = 0,					\
+		.off   = 0,					\
+		.imm   = IMM })
+
+#define BPF_MOV32_IMM(DST, IMM)					\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU | BPF_MOV | BPF_K,		\
+		.dst_reg = DST,					\
+		.src_reg = 0,					\
+		.off   = 0,					\
+		.imm   = IMM })
+
+/* Short form of mov based on type,  BPF_X: dst_reg = src_reg, BPF_K: dst_reg = imm32 */
+
+#define BPF_MOV64_RAW(TYPE, DST, SRC, IMM)			\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU64 | BPF_MOV | BPF_SRC(TYPE),	\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = IMM })
+
+#define BPF_MOV32_RAW(TYPE, DST, SRC, IMM)			\
+	((struct bpf_insn) {					\
+		.code  = BPF_ALU | BPF_MOV | BPF_SRC(TYPE),	\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = IMM })
+
+/* Direct packet access, R0 = *(uint *) (skb->data + imm32) */
+
+#define BPF_LD_ABS(SIZE, IMM)					\
+	((struct bpf_insn) {					\
+		.code  = BPF_LD | BPF_SIZE(SIZE) | BPF_ABS,	\
+		.dst_reg = 0,					\
+		.src_reg = 0,					\
+		.off   = 0,					\
+		.imm   = IMM })
+
+/* Indirect packet access, R0 = *(uint *) (skb->data + src_reg + imm32) */
+
+#define BPF_LD_IND(SIZE, SRC, IMM)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_LD | BPF_SIZE(SIZE) | BPF_IND,	\
+		.dst_reg = 0,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = IMM })
+
+/* Memory load, dst_reg = *(uint *) (src_reg + off16) */
+
+#define BPF_LDX_MEM(SIZE, DST, SRC, OFF)			\
+	((struct bpf_insn) {					\
+		.code  = BPF_LDX | BPF_SIZE(SIZE) | BPF_MEM,	\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = OFF,					\
+		.imm   = 0 })
+
+/* Memory store, *(uint *) (dst_reg + off16) = src_reg */
+
+#define BPF_STX_MEM(SIZE, DST, SRC, OFF)			\
+	((struct bpf_insn) {					\
+		.code  = BPF_STX | BPF_SIZE(SIZE) | BPF_MEM,	\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = OFF,					\
+		.imm   = 0 })
+
+/* Atomic memory add, *(uint *)(dst_reg + off16) += src_reg */
+
+#define BPF_STX_XADD(SIZE, DST, SRC, OFF)			\
+	((struct bpf_insn) {					\
+		.code  = BPF_STX | BPF_SIZE(SIZE) | BPF_XADD,	\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = OFF,					\
+		.imm   = 0 })
+
+/* Memory store, *(uint *) (dst_reg + off16) = imm32 */
+
+#define BPF_ST_MEM(SIZE, DST, OFF, IMM)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_ST | BPF_SIZE(SIZE) | BPF_MEM,	\
+		.dst_reg = DST,					\
+		.src_reg = 0,					\
+		.off   = OFF,					\
+		.imm   = IMM })
+
+/* Conditional jumps against registers, if (dst_reg 'op' src_reg) goto pc + off16 */
+
+#define BPF_JMP_REG(OP, DST, SRC, OFF)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_JMP | BPF_OP(OP) | BPF_X,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = OFF,					\
+		.imm   = 0 })
+
+/* Conditional jumps against immediates, if (dst_reg 'op' imm32) goto pc + off16 */
+
+#define BPF_JMP_IMM(OP, DST, IMM, OFF)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_JMP | BPF_OP(OP) | BPF_K,		\
+		.dst_reg = DST,					\
+		.src_reg = 0,					\
+		.off   = OFF,					\
+		.imm   = IMM })
+
+/* Unconditional jumps, goto pc + off16 */
+
+#define BPF_JMP_A(OFF)						\
+	((struct bpf_insn) {					\
+		.code  = BPF_JMP | BPF_JA,			\
+		.dst_reg = 0,					\
+		.src_reg = 0,					\
+		.off   = OFF,					\
+		.imm   = 0 })
+
+/* Function call */
+
+#define BPF_EMIT_CALL(FUNC)					\
+	((struct bpf_insn) {					\
+		.code  = BPF_JMP | BPF_CALL,			\
+		.dst_reg = 0,					\
+		.src_reg = 0,					\
+		.off   = 0,					\
+		.imm   = ((FUNC) - BPF_FUNC_unspec) })
+
+/* Raw code statement block */
+
+#define BPF_RAW_INSN(CODE, DST, SRC, OFF, IMM)			\
+	((struct bpf_insn) {					\
+		.code  = CODE,					\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = OFF,					\
+		.imm   = IMM })
+
+/* BPF_LD_IMM64 macro encodes single 'load 64-bit immediate' insn */
+
+#define BPF_LD_IMM64(DST, IMM)					\
+	BPF_LD_IMM64_RAW(DST, 0, IMM)
+
+#define BPF_LD_IMM64_RAW(DST, SRC, IMM)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_LD | BPF_DW | BPF_IMM,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = (__u32) (IMM) }),			\
+	((struct bpf_insn) {					\
+		.code  = 0, /* zero is reserved opcode */	\
+		.dst_reg = 0,					\
+		.src_reg = 0,					\
+		.off   = 0,					\
+		.imm   = ((__u64) (IMM)) >> 32 })
+
+/* pseudo BPF_LD_IMM64 insn used to refer to process-local map_fd */
+
+#define BPF_LD_MAP_FD(DST, MAP_FD)				\
+	BPF_LD_IMM64_RAW(DST, BPF_PSEUDO_MAP_FD, MAP_FD)
+
+/* Relative call */
+
+#define BPF_CALL_REL(TGT)					\
+	((struct bpf_insn) {					\
+		.code  = BPF_JMP | BPF_CALL,			\
+		.dst_reg = 0,					\
+		.src_reg = BPF_PSEUDO_CALL,			\
+		.off   = 0,					\
+		.imm   = TGT })
+
+/* Program exit */
+
+#define BPF_EXIT_INSN()						\
+	((struct bpf_insn) {					\
+		.code  = BPF_JMP | BPF_EXIT,			\
+		.dst_reg = 0,					\
+		.src_reg = 0,					\
+		.off   = 0,					\
+		.imm   = 0 })
+
+#endif /* __TOOLS_LINUX_FILTER_H */
diff --git a/tools/include/linux/ftrace.h b/tools/include/linux/ftrace.h
new file mode 100644
index 000000000..949f541ce
--- /dev/null
+++ b/tools/include/linux/ftrace.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_INCLUDE_LINUX_FTRACE_H
+#define _TOOLS_INCLUDE_LINUX_FTRACE_H
+
+#endif /* _TOOLS_INCLUDE_LINUX_FTRACE_H */
diff --git a/tools/include/linux/gfp.h b/tools/include/linux/gfp.h
new file mode 100644
index 000000000..22030756f
--- /dev/null
+++ b/tools/include/linux/gfp.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_INCLUDE_LINUX_GFP_H
+#define _TOOLS_INCLUDE_LINUX_GFP_H
+
+#endif /* _TOOLS_INCLUDE_LINUX_GFP_H */
diff --git a/tools/include/linux/hardirq.h b/tools/include/linux/hardirq.h
new file mode 100644
index 000000000..b25580b6a
--- /dev/null
+++ b/tools/include/linux/hardirq.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LIBLOCKDEP_LINUX_HARDIRQ_H_
+#define _LIBLOCKDEP_LINUX_HARDIRQ_H_
+
+#define SOFTIRQ_BITS	0UL
+#define HARDIRQ_BITS	0UL
+#define SOFTIRQ_SHIFT	0UL
+#define HARDIRQ_SHIFT	0UL
+#define hardirq_count()	0UL
+#define softirq_count()	0UL
+
+#endif
diff --git a/tools/include/linux/hash.h b/tools/include/linux/hash.h
new file mode 100644
index 000000000..ad6fa21d9
--- /dev/null
+++ b/tools/include/linux/hash.h
@@ -0,0 +1,104 @@
+#ifndef _LINUX_HASH_H
+#define _LINUX_HASH_H
+/* Fast hashing routine for ints,  longs and pointers.
+   (C) 2002 Nadia Yvette Chambers, IBM */
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+/*
+ * The "GOLDEN_RATIO_PRIME" is used in ifs/btrfs/brtfs_inode.h and
+ * fs/inode.c.  It's not actually prime any more (the previous primes
+ * were actively bad for hashing), but the name remains.
+ */
+#if BITS_PER_LONG == 32
+#define GOLDEN_RATIO_PRIME GOLDEN_RATIO_32
+#define hash_long(val, bits) hash_32(val, bits)
+#elif BITS_PER_LONG == 64
+#define hash_long(val, bits) hash_64(val, bits)
+#define GOLDEN_RATIO_PRIME GOLDEN_RATIO_64
+#else
+#error Wordsize not 32 or 64
+#endif
+
+/*
+ * This hash multiplies the input by a large odd number and takes the
+ * high bits.  Since multiplication propagates changes to the most
+ * significant end only, it is essential that the high bits of the
+ * product be used for the hash value.
+ *
+ * Chuck Lever verified the effectiveness of this technique:
+ * http://www.citi.umich.edu/techreports/reports/citi-tr-00-1.pdf
+ *
+ * Although a random odd number will do, it turns out that the golden
+ * ratio phi = (sqrt(5)-1)/2, or its negative, has particularly nice
+ * properties.  (See Knuth vol 3, section 6.4, exercise 9.)
+ *
+ * These are the negative, (1 - phi) = phi**2 = (3 - sqrt(5))/2,
+ * which is very slightly easier to multiply by and makes no
+ * difference to the hash distribution.
+ */
+#define GOLDEN_RATIO_32 0x61C88647
+#define GOLDEN_RATIO_64 0x61C8864680B583EBull
+
+#ifdef CONFIG_HAVE_ARCH_HASH
+/* This header may use the GOLDEN_RATIO_xx constants */
+#include <asm/hash.h>
+#endif
+
+/*
+ * The _generic versions exist only so lib/test_hash.c can compare
+ * the arch-optimized versions with the generic.
+ *
+ * Note that if you change these, any <asm/hash.h> that aren't updated
+ * to match need to have their HAVE_ARCH_* define values updated so the
+ * self-test will not false-positive.
+ */
+#ifndef HAVE_ARCH__HASH_32
+#define __hash_32 __hash_32_generic
+#endif
+static inline u32 __hash_32_generic(u32 val)
+{
+	return val * GOLDEN_RATIO_32;
+}
+
+#ifndef HAVE_ARCH_HASH_32
+#define hash_32 hash_32_generic
+#endif
+static inline u32 hash_32_generic(u32 val, unsigned int bits)
+{
+	/* High bits are more random, so use them. */
+	return __hash_32(val) >> (32 - bits);
+}
+
+#ifndef HAVE_ARCH_HASH_64
+#define hash_64 hash_64_generic
+#endif
+static __always_inline u32 hash_64_generic(u64 val, unsigned int bits)
+{
+#if BITS_PER_LONG == 64
+	/* 64x64-bit multiply is efficient on all 64-bit processors */
+	return val * GOLDEN_RATIO_64 >> (64 - bits);
+#else
+	/* Hash 64 bits using only 32x32-bit multiply. */
+	return hash_32((u32)val ^ __hash_32(val >> 32), bits);
+#endif
+}
+
+static inline u32 hash_ptr(const void *ptr, unsigned int bits)
+{
+	return hash_long((unsigned long)ptr, bits);
+}
+
+/* This really should be called fold32_ptr; it does no hashing to speak of. */
+static inline u32 hash32_ptr(const void *ptr)
+{
+	unsigned long val = (unsigned long)ptr;
+
+#if BITS_PER_LONG == 64
+	val ^= (val >> 32);
+#endif
+	return (u32)val;
+}
+
+#endif /* _LINUX_HASH_H */
diff --git a/tools/include/linux/hashtable.h b/tools/include/linux/hashtable.h
new file mode 100644
index 000000000..434dd5ac6
--- /dev/null
+++ b/tools/include/linux/hashtable.h
@@ -0,0 +1,149 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Statically sized hash table implementation
+ * (C) 2012  Sasha Levin <levinsasha928@gmail.com>
+ */
+
+#ifndef _LINUX_HASHTABLE_H
+#define _LINUX_HASHTABLE_H
+
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/hash.h>
+#include <linux/log2.h>
+
+#define DEFINE_HASHTABLE(name, bits)						\
+	struct hlist_head name[1 << (bits)] =					\
+			{ [0 ... ((1 << (bits)) - 1)] = HLIST_HEAD_INIT }
+
+#define DECLARE_HASHTABLE(name, bits)                                   	\
+	struct hlist_head name[1 << (bits)]
+
+#define HASH_SIZE(name) (ARRAY_SIZE(name))
+#define HASH_BITS(name) ilog2(HASH_SIZE(name))
+
+/* Use hash_32 when possible to allow for fast 32bit hashing in 64bit kernels. */
+#define hash_min(val, bits)							\
+	(sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits))
+
+static inline void __hash_init(struct hlist_head *ht, unsigned int sz)
+{
+	unsigned int i;
+
+	for (i = 0; i < sz; i++)
+		INIT_HLIST_HEAD(&ht[i]);
+}
+
+/**
+ * hash_init - initialize a hash table
+ * @hashtable: hashtable to be initialized
+ *
+ * Calculates the size of the hashtable from the given parameter, otherwise
+ * same as hash_init_size.
+ *
+ * This has to be a macro since HASH_BITS() will not work on pointers since
+ * it calculates the size during preprocessing.
+ */
+#define hash_init(hashtable) __hash_init(hashtable, HASH_SIZE(hashtable))
+
+/**
+ * hash_add - add an object to a hashtable
+ * @hashtable: hashtable to add to
+ * @node: the &struct hlist_node of the object to be added
+ * @key: the key of the object to be added
+ */
+#define hash_add(hashtable, node, key)						\
+	hlist_add_head(node, &hashtable[hash_min(key, HASH_BITS(hashtable))])
+
+/**
+ * hash_hashed - check whether an object is in any hashtable
+ * @node: the &struct hlist_node of the object to be checked
+ */
+static inline bool hash_hashed(struct hlist_node *node)
+{
+	return !hlist_unhashed(node);
+}
+
+static inline bool __hash_empty(struct hlist_head *ht, unsigned int sz)
+{
+	unsigned int i;
+
+	for (i = 0; i < sz; i++)
+		if (!hlist_empty(&ht[i]))
+			return false;
+
+	return true;
+}
+
+/**
+ * hash_empty - check whether a hashtable is empty
+ * @hashtable: hashtable to check
+ *
+ * This has to be a macro since HASH_BITS() will not work on pointers since
+ * it calculates the size during preprocessing.
+ */
+#define hash_empty(hashtable) __hash_empty(hashtable, HASH_SIZE(hashtable))
+
+/**
+ * hash_del - remove an object from a hashtable
+ * @node: &struct hlist_node of the object to remove
+ */
+static inline void hash_del(struct hlist_node *node)
+{
+	hlist_del_init(node);
+}
+
+/**
+ * hash_for_each - iterate over a hashtable
+ * @name: hashtable to iterate
+ * @bkt: integer to use as bucket loop cursor
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ */
+#define hash_for_each(name, bkt, obj, member)				\
+	for ((bkt) = 0, obj = NULL; obj == NULL && (bkt) < HASH_SIZE(name);\
+			(bkt)++)\
+		hlist_for_each_entry(obj, &name[bkt], member)
+
+/**
+ * hash_for_each_safe - iterate over a hashtable safe against removal of
+ * hash entry
+ * @name: hashtable to iterate
+ * @bkt: integer to use as bucket loop cursor
+ * @tmp: a &struct used for temporary storage
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ */
+#define hash_for_each_safe(name, bkt, tmp, obj, member)			\
+	for ((bkt) = 0, obj = NULL; obj == NULL && (bkt) < HASH_SIZE(name);\
+			(bkt)++)\
+		hlist_for_each_entry_safe(obj, tmp, &name[bkt], member)
+
+/**
+ * hash_for_each_possible - iterate over all possible objects hashing to the
+ * same bucket
+ * @name: hashtable to iterate
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ * @key: the key of the objects to iterate over
+ */
+#define hash_for_each_possible(name, obj, member, key)			\
+	hlist_for_each_entry(obj, &name[hash_min(key, HASH_BITS(name))], member)
+
+/**
+ * hash_for_each_possible_safe - iterate over all possible objects hashing to the
+ * same bucket safe against removals
+ * @name: hashtable to iterate
+ * @obj: the type * to use as a loop cursor for each entry
+ * @tmp: a &struct used for temporary storage
+ * @member: the name of the hlist_node within the struct
+ * @key: the key of the objects to iterate over
+ */
+#define hash_for_each_possible_safe(name, obj, tmp, member, key)	\
+	hlist_for_each_entry_safe(obj, tmp,\
+		&name[hash_min(key, HASH_BITS(name))], member)
+
+
+#endif
diff --git a/tools/include/linux/interrupt.h b/tools/include/linux/interrupt.h
new file mode 100644
index 000000000..6be25bbdc
--- /dev/null
+++ b/tools/include/linux/interrupt.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_INCLUDE_LINUX_INTERRUPT_H
+#define _TOOLS_INCLUDE_LINUX_INTERRUPT_H
+
+#endif /* _TOOLS_INCLUDE_LINUX_INTERRUPT_H */
diff --git a/tools/include/linux/irqflags.h b/tools/include/linux/irqflags.h
new file mode 100644
index 000000000..e734da3e5
--- /dev/null
+++ b/tools/include/linux/irqflags.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LIBLOCKDEP_LINUX_TRACE_IRQFLAGS_H_
+#define _LIBLOCKDEP_LINUX_TRACE_IRQFLAGS_H_
+
+# define trace_hardirq_context(p)	0
+# define trace_softirq_context(p)	0
+# define trace_hardirqs_enabled(p)	0
+# define trace_softirqs_enabled(p)	0
+# define trace_hardirq_enter()		do { } while (0)
+# define trace_hardirq_exit()		do { } while (0)
+# define lockdep_softirq_enter()	do { } while (0)
+# define lockdep_softirq_exit()		do { } while (0)
+# define INIT_TRACE_IRQFLAGS
+
+# define stop_critical_timings() do { } while (0)
+# define start_critical_timings() do { } while (0)
+
+#define raw_local_irq_disable() do { } while (0)
+#define raw_local_irq_enable() do { } while (0)
+#define raw_local_irq_save(flags) ((flags) = 0)
+#define raw_local_irq_restore(flags) ((void)(flags))
+#define raw_local_save_flags(flags) ((flags) = 0)
+#define raw_irqs_disabled_flags(flags) ((void)(flags))
+#define raw_irqs_disabled() 0
+#define raw_safe_halt()
+
+#define local_irq_enable() do { } while (0)
+#define local_irq_disable() do { } while (0)
+#define local_irq_save(flags) ((flags) = 0)
+#define local_irq_restore(flags) ((void)(flags))
+#define local_save_flags(flags)	((flags) = 0)
+#define irqs_disabled() (1)
+#define irqs_disabled_flags(flags) ((void)(flags), 0)
+#define safe_halt() do { } while (0)
+
+#define trace_lock_release(x, y)
+#define trace_lock_acquire(a, b, c, d, e, f, g)
+
+#endif
diff --git a/tools/include/linux/jhash.h b/tools/include/linux/jhash.h
new file mode 100644
index 000000000..348c6f47e
--- /dev/null
+++ b/tools/include/linux/jhash.h
@@ -0,0 +1,175 @@
+#ifndef _LINUX_JHASH_H
+#define _LINUX_JHASH_H
+
+/* jhash.h: Jenkins hash support.
+ *
+ * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net)
+ *
+ * http://burtleburtle.net/bob/hash/
+ *
+ * These are the credits from Bob's sources:
+ *
+ * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
+ *
+ * These are functions for producing 32-bit hashes for hash table lookup.
+ * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final()
+ * are externally useful functions.  Routines to test the hash are included
+ * if SELF_TEST is defined.  You can use this free for any purpose.  It's in
+ * the public domain.  It has no warranty.
+ *
+ * Copyright (C) 2009-2010 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
+ *
+ * I've modified Bob's hash to be useful in the Linux kernel, and
+ * any bugs present are my fault.
+ * Jozsef
+ */
+#include <linux/bitops.h>
+#include <linux/unaligned/packed_struct.h>
+
+/* Best hash sizes are of power of two */
+#define jhash_size(n)   ((u32)1<<(n))
+/* Mask the hash value, i.e (value & jhash_mask(n)) instead of (value % n) */
+#define jhash_mask(n)   (jhash_size(n)-1)
+
+/* __jhash_mix -- mix 3 32-bit values reversibly. */
+#define __jhash_mix(a, b, c)			\
+{						\
+	a -= c;  a ^= rol32(c, 4);  c += b;	\
+	b -= a;  b ^= rol32(a, 6);  a += c;	\
+	c -= b;  c ^= rol32(b, 8);  b += a;	\
+	a -= c;  a ^= rol32(c, 16); c += b;	\
+	b -= a;  b ^= rol32(a, 19); a += c;	\
+	c -= b;  c ^= rol32(b, 4);  b += a;	\
+}
+
+/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
+#define __jhash_final(a, b, c)			\
+{						\
+	c ^= b; c -= rol32(b, 14);		\
+	a ^= c; a -= rol32(c, 11);		\
+	b ^= a; b -= rol32(a, 25);		\
+	c ^= b; c -= rol32(b, 16);		\
+	a ^= c; a -= rol32(c, 4);		\
+	b ^= a; b -= rol32(a, 14);		\
+	c ^= b; c -= rol32(b, 24);		\
+}
+
+/* An arbitrary initial parameter */
+#define JHASH_INITVAL		0xdeadbeef
+
+/* jhash - hash an arbitrary key
+ * @k: sequence of bytes as key
+ * @length: the length of the key
+ * @initval: the previous hash, or an arbitray value
+ *
+ * The generic version, hashes an arbitrary sequence of bytes.
+ * No alignment or length assumptions are made about the input key.
+ *
+ * Returns the hash value of the key. The result depends on endianness.
+ */
+static inline u32 jhash(const void *key, u32 length, u32 initval)
+{
+	u32 a, b, c;
+	const u8 *k = key;
+
+	/* Set up the internal state */
+	a = b = c = JHASH_INITVAL + length + initval;
+
+	/* All but the last block: affect some 32 bits of (a,b,c) */
+	while (length > 12) {
+		a += __get_unaligned_cpu32(k);
+		b += __get_unaligned_cpu32(k + 4);
+		c += __get_unaligned_cpu32(k + 8);
+		__jhash_mix(a, b, c);
+		length -= 12;
+		k += 12;
+	}
+	/* Last block: affect all 32 bits of (c) */
+	/* All the case statements fall through */
+	switch (length) {
+	case 12: c += (u32)k[11]<<24;
+	case 11: c += (u32)k[10]<<16;
+	case 10: c += (u32)k[9]<<8;
+	case 9:  c += k[8];
+	case 8:  b += (u32)k[7]<<24;
+	case 7:  b += (u32)k[6]<<16;
+	case 6:  b += (u32)k[5]<<8;
+	case 5:  b += k[4];
+	case 4:  a += (u32)k[3]<<24;
+	case 3:  a += (u32)k[2]<<16;
+	case 2:  a += (u32)k[1]<<8;
+	case 1:  a += k[0];
+		 __jhash_final(a, b, c);
+	case 0: /* Nothing left to add */
+		break;
+	}
+
+	return c;
+}
+
+/* jhash2 - hash an array of u32's
+ * @k: the key which must be an array of u32's
+ * @length: the number of u32's in the key
+ * @initval: the previous hash, or an arbitray value
+ *
+ * Returns the hash value of the key.
+ */
+static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
+{
+	u32 a, b, c;
+
+	/* Set up the internal state */
+	a = b = c = JHASH_INITVAL + (length<<2) + initval;
+
+	/* Handle most of the key */
+	while (length > 3) {
+		a += k[0];
+		b += k[1];
+		c += k[2];
+		__jhash_mix(a, b, c);
+		length -= 3;
+		k += 3;
+	}
+
+	/* Handle the last 3 u32's: all the case statements fall through */
+	switch (length) {
+	case 3: c += k[2];
+	case 2: b += k[1];
+	case 1: a += k[0];
+		__jhash_final(a, b, c);
+	case 0:	/* Nothing left to add */
+		break;
+	}
+
+	return c;
+}
+
+
+/* __jhash_nwords - hash exactly 3, 2 or 1 word(s) */
+static inline u32 __jhash_nwords(u32 a, u32 b, u32 c, u32 initval)
+{
+	a += initval;
+	b += initval;
+	c += initval;
+
+	__jhash_final(a, b, c);
+
+	return c;
+}
+
+static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
+{
+	return __jhash_nwords(a, b, c, initval + JHASH_INITVAL + (3 << 2));
+}
+
+static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
+{
+	return __jhash_nwords(a, b, 0, initval + JHASH_INITVAL + (2 << 2));
+}
+
+static inline u32 jhash_1word(u32 a, u32 initval)
+{
+	return __jhash_nwords(a, 0, 0, initval + JHASH_INITVAL + (1 << 2));
+}
+
+#endif /* _LINUX_JHASH_H */
diff --git a/tools/include/linux/kallsyms.h b/tools/include/linux/kallsyms.h
new file mode 100644
index 000000000..89ca6fe25
--- /dev/null
+++ b/tools/include/linux/kallsyms.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LIBLOCKDEP_LINUX_KALLSYMS_H_
+#define _LIBLOCKDEP_LINUX_KALLSYMS_H_
+
+#include <linux/kernel.h>
+#include <stdio.h>
+#include <unistd.h>
+
+#define KSYM_NAME_LEN 128
+
+struct module;
+
+static inline const char *kallsyms_lookup(unsigned long addr,
+					  unsigned long *symbolsize,
+					  unsigned long *offset,
+					  char **modname, char *namebuf)
+{
+	return NULL;
+}
+
+#include <execinfo.h>
+#include <stdlib.h>
+static inline void print_ip_sym(unsigned long ip)
+{
+	char **name;
+
+	name = backtrace_symbols((void **)&ip, 1);
+
+	dprintf(STDOUT_FILENO, "%s\n", *name);
+
+	free(name);
+}
+
+#endif
diff --git a/tools/include/linux/kern_levels.h b/tools/include/linux/kern_levels.h
new file mode 100644
index 000000000..778ecb984
--- /dev/null
+++ b/tools/include/linux/kern_levels.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __KERN_LEVELS_H__
+#define __KERN_LEVELS_H__
+
+#define KERN_SOH	""		/* ASCII Start Of Header */
+#define KERN_SOH_ASCII	''
+
+#define KERN_EMERG	KERN_SOH ""	/* system is unusable */
+#define KERN_ALERT	KERN_SOH ""	/* action must be taken immediately */
+#define KERN_CRIT	KERN_SOH ""	/* critical conditions */
+#define KERN_ERR	KERN_SOH ""	/* error conditions */
+#define KERN_WARNING	KERN_SOH ""	/* warning conditions */
+#define KERN_NOTICE	KERN_SOH ""	/* normal but significant condition */
+#define KERN_INFO	KERN_SOH ""	/* informational */
+#define KERN_DEBUG	KERN_SOH ""	/* debug-level messages */
+
+#define KERN_DEFAULT	KERN_SOH ""	/* the default kernel loglevel */
+
+/*
+ * Annotation for a "continued" line of log printout (only done after a
+ * line that had no enclosing \n). Only to be used by core/arch code
+ * during early bootup (a continued line is not SMP-safe otherwise).
+ */
+#define KERN_CONT	""
+
+#endif
diff --git a/tools/include/linux/kernel.h b/tools/include/linux/kernel.h
new file mode 100644
index 000000000..0ad884452
--- /dev/null
+++ b/tools/include/linux/kernel.h
@@ -0,0 +1,120 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __TOOLS_LINUX_KERNEL_H
+#define __TOOLS_LINUX_KERNEL_H
+
+#include <stdarg.h>
+#include <stddef.h>
+#include <assert.h>
+#include <linux/compiler.h>
+#include <endian.h>
+#include <byteswap.h>
+
+#ifndef UINT_MAX
+#define UINT_MAX	(~0U)
+#endif
+
+#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
+
+#define PERF_ALIGN(x, a)	__PERF_ALIGN_MASK(x, (typeof(x))(a)-1)
+#define __PERF_ALIGN_MASK(x, mask)	(((x)+(mask))&~(mask))
+
+#ifndef offsetof
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+#endif
+
+#ifndef container_of
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr:	the pointer to the member.
+ * @type:	the type of the container struct this is embedded in.
+ * @member:	the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({			\
+	const typeof(((type *)0)->member) * __mptr = (ptr);	\
+	(type *)((char *)__mptr - offsetof(type, member)); })
+#endif
+
+#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
+
+#ifndef max
+#define max(x, y) ({				\
+	typeof(x) _max1 = (x);			\
+	typeof(y) _max2 = (y);			\
+	(void) (&_max1 == &_max2);		\
+	_max1 > _max2 ? _max1 : _max2; })
+#endif
+
+#ifndef min
+#define min(x, y) ({				\
+	typeof(x) _min1 = (x);			\
+	typeof(y) _min2 = (y);			\
+	(void) (&_min1 == &_min2);		\
+	_min1 < _min2 ? _min1 : _min2; })
+#endif
+
+#ifndef roundup
+#define roundup(x, y) (                                \
+{                                                      \
+	const typeof(y) __y = y;		       \
+	(((x) + (__y - 1)) / __y) * __y;	       \
+}                                                      \
+)
+#endif
+
+#ifndef BUG_ON
+#ifdef NDEBUG
+#define BUG_ON(cond) do { if (cond) {} } while (0)
+#else
+#define BUG_ON(cond) assert(!(cond))
+#endif
+#endif
+
+#if __BYTE_ORDER == __BIG_ENDIAN
+#define cpu_to_le16 bswap_16
+#define cpu_to_le32 bswap_32
+#define cpu_to_le64 bswap_64
+#define le16_to_cpu bswap_16
+#define le32_to_cpu bswap_32
+#define le64_to_cpu bswap_64
+#define cpu_to_be16
+#define cpu_to_be32
+#define cpu_to_be64
+#define be16_to_cpu
+#define be32_to_cpu
+#define be64_to_cpu
+#else
+#define cpu_to_le16
+#define cpu_to_le32
+#define cpu_to_le64
+#define le16_to_cpu
+#define le32_to_cpu
+#define le64_to_cpu
+#define cpu_to_be16 bswap_16
+#define cpu_to_be32 bswap_32
+#define cpu_to_be64 bswap_64
+#define be16_to_cpu bswap_16
+#define be32_to_cpu bswap_32
+#define be64_to_cpu bswap_64
+#endif
+
+int vscnprintf(char *buf, size_t size, const char *fmt, va_list args);
+int scnprintf(char * buf, size_t size, const char * fmt, ...);
+
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
+
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x, y) ((__typeof__(x))((y)-1))
+#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
+#define round_down(x, y) ((x) & ~__round_mask(x, y))
+
+#define current_gfp_context(k) 0
+#define synchronize_sched()
+
+#endif
diff --git a/tools/include/linux/linkage.h b/tools/include/linux/linkage.h
new file mode 100644
index 000000000..bc763d500
--- /dev/null
+++ b/tools/include/linux/linkage.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_INCLUDE_LINUX_LINKAGE_H
+#define _TOOLS_INCLUDE_LINUX_LINKAGE_H
+
+#endif /* _TOOLS_INCLUDE_LINUX_LINKAGE_H */
diff --git a/tools/include/linux/list.h b/tools/include/linux/list.h
new file mode 100644
index 000000000..b2fc48d54
--- /dev/null
+++ b/tools/include/linux/list.h
@@ -0,0 +1,772 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __TOOLS_LINUX_LIST_H
+#define __TOOLS_LINUX_LIST_H
+
+#include <linux/types.h>
+#include <linux/poison.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+
+/*
+ * Simple doubly linked list implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole lists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+	struct list_head name = LIST_HEAD_INIT(name)
+
+static inline void INIT_LIST_HEAD(struct list_head *list)
+{
+	list->next = list;
+	list->prev = list;
+}
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+#ifndef CONFIG_DEBUG_LIST
+static inline void __list_add(struct list_head *new,
+			      struct list_head *prev,
+			      struct list_head *next)
+{
+	next->prev = new;
+	new->next = next;
+	new->prev = prev;
+	prev->next = new;
+}
+#else
+extern void __list_add(struct list_head *new,
+			      struct list_head *prev,
+			      struct list_head *next);
+#endif
+
+/**
+ * list_add - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
+static inline void list_add(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head, head->next);
+}
+
+
+/**
+ * list_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static inline void list_add_tail(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head->prev, head);
+}
+
+/*
+ * Delete a list entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_del(struct list_head * prev, struct list_head * next)
+{
+	next->prev = prev;
+	WRITE_ONCE(prev->next, next);
+}
+
+/**
+ * list_del - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty() on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
+#ifndef CONFIG_DEBUG_LIST
+static inline void __list_del_entry(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+}
+
+static inline void list_del(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+	entry->next = LIST_POISON1;
+	entry->prev = LIST_POISON2;
+}
+#else
+extern void __list_del_entry(struct list_head *entry);
+extern void list_del(struct list_head *entry);
+#endif
+
+/**
+ * list_replace - replace old entry by new one
+ * @old : the element to be replaced
+ * @new : the new element to insert
+ *
+ * If @old was empty, it will be overwritten.
+ */
+static inline void list_replace(struct list_head *old,
+				struct list_head *new)
+{
+	new->next = old->next;
+	new->next->prev = new;
+	new->prev = old->prev;
+	new->prev->next = new;
+}
+
+static inline void list_replace_init(struct list_head *old,
+					struct list_head *new)
+{
+	list_replace(old, new);
+	INIT_LIST_HEAD(old);
+}
+
+/**
+ * list_del_init - deletes entry from list and reinitialize it.
+ * @entry: the element to delete from the list.
+ */
+static inline void list_del_init(struct list_head *entry)
+{
+	__list_del_entry(entry);
+	INIT_LIST_HEAD(entry);
+}
+
+/**
+ * list_move - delete from one list and add as another's head
+ * @list: the entry to move
+ * @head: the head that will precede our entry
+ */
+static inline void list_move(struct list_head *list, struct list_head *head)
+{
+	__list_del_entry(list);
+	list_add(list, head);
+}
+
+/**
+ * list_move_tail - delete from one list and add as another's tail
+ * @list: the entry to move
+ * @head: the head that will follow our entry
+ */
+static inline void list_move_tail(struct list_head *list,
+				  struct list_head *head)
+{
+	__list_del_entry(list);
+	list_add_tail(list, head);
+}
+
+/**
+ * list_is_last - tests whether @list is the last entry in list @head
+ * @list: the entry to test
+ * @head: the head of the list
+ */
+static inline int list_is_last(const struct list_head *list,
+				const struct list_head *head)
+{
+	return list->next == head;
+}
+
+/**
+ * list_empty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static inline int list_empty(const struct list_head *head)
+{
+	return head->next == head;
+}
+
+/**
+ * list_empty_careful - tests whether a list is empty and not being modified
+ * @head: the list to test
+ *
+ * Description:
+ * tests whether a list is empty _and_ checks that no other CPU might be
+ * in the process of modifying either member (next or prev)
+ *
+ * NOTE: using list_empty_careful() without synchronization
+ * can only be safe if the only activity that can happen
+ * to the list entry is list_del_init(). Eg. it cannot be used
+ * if another CPU could re-list_add() it.
+ */
+static inline int list_empty_careful(const struct list_head *head)
+{
+	struct list_head *next = head->next;
+	return (next == head) && (next == head->prev);
+}
+
+/**
+ * list_rotate_left - rotate the list to the left
+ * @head: the head of the list
+ */
+static inline void list_rotate_left(struct list_head *head)
+{
+	struct list_head *first;
+
+	if (!list_empty(head)) {
+		first = head->next;
+		list_move_tail(first, head);
+	}
+}
+
+/**
+ * list_is_singular - tests whether a list has just one entry.
+ * @head: the list to test.
+ */
+static inline int list_is_singular(const struct list_head *head)
+{
+	return !list_empty(head) && (head->next == head->prev);
+}
+
+static inline void __list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	struct list_head *new_first = entry->next;
+	list->next = head->next;
+	list->next->prev = list;
+	list->prev = entry;
+	entry->next = list;
+	head->next = new_first;
+	new_first->prev = head;
+}
+
+/**
+ * list_cut_position - cut a list into two
+ * @list: a new list to add all removed entries
+ * @head: a list with entries
+ * @entry: an entry within head, could be the head itself
+ *	and if so we won't cut the list
+ *
+ * This helper moves the initial part of @head, up to and
+ * including @entry, from @head to @list. You should
+ * pass on @entry an element you know is on @head. @list
+ * should be an empty list or a list you do not care about
+ * losing its data.
+ *
+ */
+static inline void list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	if (list_empty(head))
+		return;
+	if (list_is_singular(head) &&
+		(head->next != entry && head != entry))
+		return;
+	if (entry == head)
+		INIT_LIST_HEAD(list);
+	else
+		__list_cut_position(list, head, entry);
+}
+
+static inline void __list_splice(const struct list_head *list,
+				 struct list_head *prev,
+				 struct list_head *next)
+{
+	struct list_head *first = list->next;
+	struct list_head *last = list->prev;
+
+	first->prev = prev;
+	prev->next = first;
+
+	last->next = next;
+	next->prev = last;
+}
+
+/**
+ * list_splice - join two lists, this is designed for stacks
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice(const struct list_head *list,
+				struct list_head *head)
+{
+	if (!list_empty(list))
+		__list_splice(list, head, head->next);
+}
+
+/**
+ * list_splice_tail - join two lists, each list being a queue
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice_tail(struct list_head *list,
+				struct list_head *head)
+{
+	if (!list_empty(list))
+		__list_splice(list, head->prev, head);
+}
+
+/**
+ * list_splice_init - join two lists and reinitialise the emptied list.
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_init(struct list_head *list,
+				    struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__list_splice(list, head, head->next);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+/**
+ * list_splice_tail_init - join two lists and reinitialise the emptied list
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * Each of the lists is a queue.
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_tail_init(struct list_head *list,
+					 struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__list_splice(list, head->prev, head);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr:	the &struct list_head pointer.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_head within the struct.
+ */
+#define list_entry(ptr, type, member) \
+	container_of(ptr, type, member)
+
+/**
+ * list_first_entry - get the first element from a list
+ * @ptr:	the list head to take the element from.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_head within the struct.
+ *
+ * Note, that list is expected to be not empty.
+ */
+#define list_first_entry(ptr, type, member) \
+	list_entry((ptr)->next, type, member)
+
+/**
+ * list_last_entry - get the last element from a list
+ * @ptr:	the list head to take the element from.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_head within the struct.
+ *
+ * Note, that list is expected to be not empty.
+ */
+#define list_last_entry(ptr, type, member) \
+	list_entry((ptr)->prev, type, member)
+
+/**
+ * list_first_entry_or_null - get the first element from a list
+ * @ptr:	the list head to take the element from.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_head within the struct.
+ *
+ * Note that if the list is empty, it returns NULL.
+ */
+#define list_first_entry_or_null(ptr, type, member) \
+	(!list_empty(ptr) ? list_first_entry(ptr, type, member) : NULL)
+
+/**
+ * list_next_entry - get the next element in list
+ * @pos:	the type * to cursor
+ * @member:	the name of the list_head within the struct.
+ */
+#define list_next_entry(pos, member) \
+	list_entry((pos)->member.next, typeof(*(pos)), member)
+
+/**
+ * list_prev_entry - get the prev element in list
+ * @pos:	the type * to cursor
+ * @member:	the name of the list_head within the struct.
+ */
+#define list_prev_entry(pos, member) \
+	list_entry((pos)->member.prev, typeof(*(pos)), member)
+
+/**
+ * list_for_each	-	iterate over a list
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @head:	the head for your list.
+ */
+#define list_for_each(pos, head) \
+	for (pos = (head)->next; pos != (head); pos = pos->next)
+
+/**
+ * list_for_each_prev	-	iterate over a list backwards
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @head:	the head for your list.
+ */
+#define list_for_each_prev(pos, head) \
+	for (pos = (head)->prev; pos != (head); pos = pos->prev)
+
+/**
+ * list_for_each_safe - iterate over a list safe against removal of list entry
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @n:		another &struct list_head to use as temporary storage
+ * @head:	the head for your list.
+ */
+#define list_for_each_safe(pos, n, head) \
+	for (pos = (head)->next, n = pos->next; pos != (head); \
+		pos = n, n = pos->next)
+
+/**
+ * list_for_each_prev_safe - iterate over a list backwards safe against removal of list entry
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @n:		another &struct list_head to use as temporary storage
+ * @head:	the head for your list.
+ */
+#define list_for_each_prev_safe(pos, n, head) \
+	for (pos = (head)->prev, n = pos->prev; \
+	     pos != (head); \
+	     pos = n, n = pos->prev)
+
+/**
+ * list_for_each_entry	-	iterate over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_head within the struct.
+ */
+#define list_for_each_entry(pos, head, member)				\
+	for (pos = list_first_entry(head, typeof(*pos), member);	\
+	     &pos->member != (head);					\
+	     pos = list_next_entry(pos, member))
+
+/**
+ * list_for_each_entry_reverse - iterate backwards over list of given type.
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_head within the struct.
+ */
+#define list_for_each_entry_reverse(pos, head, member)			\
+	for (pos = list_last_entry(head, typeof(*pos), member);		\
+	     &pos->member != (head); 					\
+	     pos = list_prev_entry(pos, member))
+
+/**
+ * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
+ * @pos:	the type * to use as a start point
+ * @head:	the head of the list
+ * @member:	the name of the list_head within the struct.
+ *
+ * Prepares a pos entry for use as a start point in list_for_each_entry_continue().
+ */
+#define list_prepare_entry(pos, head, member) \
+	((pos) ? : list_entry(head, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_continue - continue iteration over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_head within the struct.
+ *
+ * Continue to iterate over list of given type, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue(pos, head, member) 		\
+	for (pos = list_next_entry(pos, member);			\
+	     &pos->member != (head);					\
+	     pos = list_next_entry(pos, member))
+
+/**
+ * list_for_each_entry_continue_reverse - iterate backwards from the given point
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_head within the struct.
+ *
+ * Start to iterate over list of given type backwards, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue_reverse(pos, head, member)		\
+	for (pos = list_prev_entry(pos, member);			\
+	     &pos->member != (head);					\
+	     pos = list_prev_entry(pos, member))
+
+/**
+ * list_for_each_entry_from - iterate over list of given type from the current point
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_head within the struct.
+ *
+ * Iterate over list of given type, continuing from current position.
+ */
+#define list_for_each_entry_from(pos, head, member) 			\
+	for (; &pos->member != (head);					\
+	     pos = list_next_entry(pos, member))
+
+/**
+ * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_head within the struct.
+ */
+#define list_for_each_entry_safe(pos, n, head, member)			\
+	for (pos = list_first_entry(head, typeof(*pos), member),	\
+		n = list_next_entry(pos, member);			\
+	     &pos->member != (head); 					\
+	     pos = n, n = list_next_entry(n, member))
+
+/**
+ * list_for_each_entry_safe_continue - continue list iteration safe against removal
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_head within the struct.
+ *
+ * Iterate over list of given type, continuing after current point,
+ * safe against removal of list entry.
+ */
+#define list_for_each_entry_safe_continue(pos, n, head, member) 		\
+	for (pos = list_next_entry(pos, member), 				\
+		n = list_next_entry(pos, member);				\
+	     &pos->member != (head);						\
+	     pos = n, n = list_next_entry(n, member))
+
+/**
+ * list_for_each_entry_safe_from - iterate over list from current point safe against removal
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_head within the struct.
+ *
+ * Iterate over list of given type from current point, safe against
+ * removal of list entry.
+ */
+#define list_for_each_entry_safe_from(pos, n, head, member) 			\
+	for (n = list_next_entry(pos, member);					\
+	     &pos->member != (head);						\
+	     pos = n, n = list_next_entry(n, member))
+
+/**
+ * list_for_each_entry_safe_reverse - iterate backwards over list safe against removal
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_head within the struct.
+ *
+ * Iterate backwards over list of given type, safe against removal
+ * of list entry.
+ */
+#define list_for_each_entry_safe_reverse(pos, n, head, member)		\
+	for (pos = list_last_entry(head, typeof(*pos), member),		\
+		n = list_prev_entry(pos, member);			\
+	     &pos->member != (head); 					\
+	     pos = n, n = list_prev_entry(n, member))
+
+/**
+ * list_safe_reset_next - reset a stale list_for_each_entry_safe loop
+ * @pos:	the loop cursor used in the list_for_each_entry_safe loop
+ * @n:		temporary storage used in list_for_each_entry_safe
+ * @member:	the name of the list_head within the struct.
+ *
+ * list_safe_reset_next is not safe to use in general if the list may be
+ * modified concurrently (eg. the lock is dropped in the loop body). An
+ * exception to this is if the cursor element (pos) is pinned in the list,
+ * and list_safe_reset_next is called after re-taking the lock and before
+ * completing the current iteration of the loop body.
+ */
+#define list_safe_reset_next(pos, n, member)				\
+	n = list_next_entry(pos, member)
+
+/*
+ * Double linked lists with a single pointer list head.
+ * Mostly useful for hash tables where the two pointer list head is
+ * too wasteful.
+ * You lose the ability to access the tail in O(1).
+ */
+
+#define HLIST_HEAD_INIT { .first = NULL }
+#define HLIST_HEAD(name) struct hlist_head name = {  .first = NULL }
+#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
+static inline void INIT_HLIST_NODE(struct hlist_node *h)
+{
+	h->next = NULL;
+	h->pprev = NULL;
+}
+
+static inline int hlist_unhashed(const struct hlist_node *h)
+{
+	return !h->pprev;
+}
+
+static inline int hlist_empty(const struct hlist_head *h)
+{
+	return !h->first;
+}
+
+static inline void __hlist_del(struct hlist_node *n)
+{
+	struct hlist_node *next = n->next;
+	struct hlist_node **pprev = n->pprev;
+
+	WRITE_ONCE(*pprev, next);
+	if (next)
+		next->pprev = pprev;
+}
+
+static inline void hlist_del(struct hlist_node *n)
+{
+	__hlist_del(n);
+	n->next = LIST_POISON1;
+	n->pprev = LIST_POISON2;
+}
+
+static inline void hlist_del_init(struct hlist_node *n)
+{
+	if (!hlist_unhashed(n)) {
+		__hlist_del(n);
+		INIT_HLIST_NODE(n);
+	}
+}
+
+static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
+{
+	struct hlist_node *first = h->first;
+	n->next = first;
+	if (first)
+		first->pprev = &n->next;
+	h->first = n;
+	n->pprev = &h->first;
+}
+
+/* next must be != NULL */
+static inline void hlist_add_before(struct hlist_node *n,
+					struct hlist_node *next)
+{
+	n->pprev = next->pprev;
+	n->next = next;
+	next->pprev = &n->next;
+	*(n->pprev) = n;
+}
+
+static inline void hlist_add_behind(struct hlist_node *n,
+				    struct hlist_node *prev)
+{
+	n->next = prev->next;
+	prev->next = n;
+	n->pprev = &prev->next;
+
+	if (n->next)
+		n->next->pprev  = &n->next;
+}
+
+/* after that we'll appear to be on some hlist and hlist_del will work */
+static inline void hlist_add_fake(struct hlist_node *n)
+{
+	n->pprev = &n->next;
+}
+
+static inline bool hlist_fake(struct hlist_node *h)
+{
+	return h->pprev == &h->next;
+}
+
+/*
+ * Move a list from one list head to another. Fixup the pprev
+ * reference of the first entry if it exists.
+ */
+static inline void hlist_move_list(struct hlist_head *old,
+				   struct hlist_head *new)
+{
+	new->first = old->first;
+	if (new->first)
+		new->first->pprev = &new->first;
+	old->first = NULL;
+}
+
+#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
+
+#define hlist_for_each(pos, head) \
+	for (pos = (head)->first; pos ; pos = pos->next)
+
+#define hlist_for_each_safe(pos, n, head) \
+	for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
+	     pos = n)
+
+#define hlist_entry_safe(ptr, type, member) \
+	({ typeof(ptr) ____ptr = (ptr); \
+	   ____ptr ? hlist_entry(____ptr, type, member) : NULL; \
+	})
+
+/**
+ * hlist_for_each_entry	- iterate over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry(pos, head, member)				\
+	for (pos = hlist_entry_safe((head)->first, typeof(*(pos)), member);\
+	     pos;							\
+	     pos = hlist_entry_safe((pos)->member.next, typeof(*(pos)), member))
+
+/**
+ * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
+ * @pos:	the type * to use as a loop cursor.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_continue(pos, member)			\
+	for (pos = hlist_entry_safe((pos)->member.next, typeof(*(pos)), member);\
+	     pos;							\
+	     pos = hlist_entry_safe((pos)->member.next, typeof(*(pos)), member))
+
+/**
+ * hlist_for_each_entry_from - iterate over a hlist continuing from current point
+ * @pos:	the type * to use as a loop cursor.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_from(pos, member)				\
+	for (; pos;							\
+	     pos = hlist_entry_safe((pos)->member.next, typeof(*(pos)), member))
+
+/**
+ * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another &struct hlist_node to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_safe(pos, n, head, member) 		\
+	for (pos = hlist_entry_safe((head)->first, typeof(*pos), member);\
+	     pos && ({ n = pos->member.next; 1; });			\
+	     pos = hlist_entry_safe(n, typeof(*pos), member))
+
+/**
+ * list_del_range - deletes range of entries from list.
+ * @begin: first element in the range to delete from the list.
+ * @end: last element in the range to delete from the list.
+ * Note: list_empty on the range of entries does not return true after this,
+ * the entries is in an undefined state.
+ */
+static inline void list_del_range(struct list_head *begin,
+				  struct list_head *end)
+{
+	begin->prev->next = end->next;
+	end->next->prev = begin->prev;
+}
+
+/**
+ * list_for_each_from	-	iterate over a list from one of its nodes
+ * @pos:  the &struct list_head to use as a loop cursor, from where to start
+ * @head: the head for your list.
+ */
+#define list_for_each_from(pos, head) \
+	for (; pos != (head); pos = pos->next)
+
+#endif /* __TOOLS_LINUX_LIST_H */
diff --git a/tools/include/linux/lockdep.h b/tools/include/linux/lockdep.h
new file mode 100644
index 000000000..e56997288
--- /dev/null
+++ b/tools/include/linux/lockdep.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LIBLOCKDEP_LOCKDEP_H_
+#define _LIBLOCKDEP_LOCKDEP_H_
+
+#include <sys/prctl.h>
+#include <sys/syscall.h>
+#include <string.h>
+#include <limits.h>
+#include <linux/utsname.h>
+#include <linux/compiler.h>
+#include <linux/export.h>
+#include <linux/kern_levels.h>
+#include <linux/err.h>
+#include <linux/rcu.h>
+#include <linux/list.h>
+#include <linux/hardirq.h>
+#include <unistd.h>
+
+#define MAX_LOCK_DEPTH 63UL
+
+#define asmlinkage
+#define __visible
+
+#include "../../../include/linux/lockdep.h"
+
+struct task_struct {
+	u64 curr_chain_key;
+	int lockdep_depth;
+	unsigned int lockdep_recursion;
+	struct held_lock held_locks[MAX_LOCK_DEPTH];
+	gfp_t lockdep_reclaim_gfp;
+	int pid;
+	int state;
+	char comm[17];
+};
+
+#define TASK_RUNNING 0
+
+extern struct task_struct *__curr(void);
+
+#define current (__curr())
+
+static inline int debug_locks_off(void)
+{
+	return 1;
+}
+
+#define task_pid_nr(tsk) ((tsk)->pid)
+
+#define KSYM_NAME_LEN 128
+#define printk(...) dprintf(STDOUT_FILENO, __VA_ARGS__)
+#define pr_err(format, ...) fprintf (stderr, format, ## __VA_ARGS__)
+#define pr_warn pr_err
+#define pr_cont pr_err
+
+#define list_del_rcu list_del
+
+#define atomic_t unsigned long
+#define atomic_inc(x) ((*(x))++)
+
+#define print_tainted() ""
+#define static_obj(x) 1
+
+#define debug_show_all_locks()
+extern void debug_check_no_locks_held(void);
+
+static __used bool __is_kernel_percpu_address(unsigned long addr, void *can_addr)
+{
+	return false;
+}
+
+#endif
diff --git a/tools/include/linux/log2.h b/tools/include/linux/log2.h
new file mode 100644
index 000000000..0325cefc2
--- /dev/null
+++ b/tools/include/linux/log2.h
@@ -0,0 +1,179 @@
+/* Integer base 2 logarithm calculation
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _TOOLS_LINUX_LOG2_H
+#define _TOOLS_LINUX_LOG2_H
+
+#include <linux/bitops.h>
+#include <linux/types.h>
+
+/*
+ * non-constant log of base 2 calculators
+ * - the arch may override these in asm/bitops.h if they can be implemented
+ *   more efficiently than using fls() and fls64()
+ * - the arch is not required to handle n==0 if implementing the fallback
+ */
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+	return fls(n) - 1;
+}
+
+static inline __attribute__((const))
+int __ilog2_u64(u64 n)
+{
+	return fls64(n) - 1;
+}
+
+/*
+ *  Determine whether some value is a power of two, where zero is
+ * *not* considered a power of two.
+ */
+
+static inline __attribute__((const))
+bool is_power_of_2(unsigned long n)
+{
+	return (n != 0 && ((n & (n - 1)) == 0));
+}
+
+/*
+ * round up to nearest power of two
+ */
+static inline __attribute__((const))
+unsigned long __roundup_pow_of_two(unsigned long n)
+{
+	return 1UL << fls_long(n - 1);
+}
+
+/*
+ * round down to nearest power of two
+ */
+static inline __attribute__((const))
+unsigned long __rounddown_pow_of_two(unsigned long n)
+{
+	return 1UL << (fls_long(n) - 1);
+}
+
+/**
+ * ilog2 - log of base 2 of 32-bit or a 64-bit unsigned value
+ * @n - parameter
+ *
+ * constant-capable log of base 2 calculation
+ * - this can be used to initialise global variables from constant data, hence
+ *   the massive ternary operator construction
+ *
+ * selects the appropriately-sized optimised version depending on sizeof(n)
+ */
+#define ilog2(n)				\
+(						\
+	__builtin_constant_p(n) ? (		\
+		(n) < 2 ? 0 :			\
+		(n) & (1ULL << 63) ? 63 :	\
+		(n) & (1ULL << 62) ? 62 :	\
+		(n) & (1ULL << 61) ? 61 :	\
+		(n) & (1ULL << 60) ? 60 :	\
+		(n) & (1ULL << 59) ? 59 :	\
+		(n) & (1ULL << 58) ? 58 :	\
+		(n) & (1ULL << 57) ? 57 :	\
+		(n) & (1ULL << 56) ? 56 :	\
+		(n) & (1ULL << 55) ? 55 :	\
+		(n) & (1ULL << 54) ? 54 :	\
+		(n) & (1ULL << 53) ? 53 :	\
+		(n) & (1ULL << 52) ? 52 :	\
+		(n) & (1ULL << 51) ? 51 :	\
+		(n) & (1ULL << 50) ? 50 :	\
+		(n) & (1ULL << 49) ? 49 :	\
+		(n) & (1ULL << 48) ? 48 :	\
+		(n) & (1ULL << 47) ? 47 :	\
+		(n) & (1ULL << 46) ? 46 :	\
+		(n) & (1ULL << 45) ? 45 :	\
+		(n) & (1ULL << 44) ? 44 :	\
+		(n) & (1ULL << 43) ? 43 :	\
+		(n) & (1ULL << 42) ? 42 :	\
+		(n) & (1ULL << 41) ? 41 :	\
+		(n) & (1ULL << 40) ? 40 :	\
+		(n) & (1ULL << 39) ? 39 :	\
+		(n) & (1ULL << 38) ? 38 :	\
+		(n) & (1ULL << 37) ? 37 :	\
+		(n) & (1ULL << 36) ? 36 :	\
+		(n) & (1ULL << 35) ? 35 :	\
+		(n) & (1ULL << 34) ? 34 :	\
+		(n) & (1ULL << 33) ? 33 :	\
+		(n) & (1ULL << 32) ? 32 :	\
+		(n) & (1ULL << 31) ? 31 :	\
+		(n) & (1ULL << 30) ? 30 :	\
+		(n) & (1ULL << 29) ? 29 :	\
+		(n) & (1ULL << 28) ? 28 :	\
+		(n) & (1ULL << 27) ? 27 :	\
+		(n) & (1ULL << 26) ? 26 :	\
+		(n) & (1ULL << 25) ? 25 :	\
+		(n) & (1ULL << 24) ? 24 :	\
+		(n) & (1ULL << 23) ? 23 :	\
+		(n) & (1ULL << 22) ? 22 :	\
+		(n) & (1ULL << 21) ? 21 :	\
+		(n) & (1ULL << 20) ? 20 :	\
+		(n) & (1ULL << 19) ? 19 :	\
+		(n) & (1ULL << 18) ? 18 :	\
+		(n) & (1ULL << 17) ? 17 :	\
+		(n) & (1ULL << 16) ? 16 :	\
+		(n) & (1ULL << 15) ? 15 :	\
+		(n) & (1ULL << 14) ? 14 :	\
+		(n) & (1ULL << 13) ? 13 :	\
+		(n) & (1ULL << 12) ? 12 :	\
+		(n) & (1ULL << 11) ? 11 :	\
+		(n) & (1ULL << 10) ? 10 :	\
+		(n) & (1ULL <<  9) ?  9 :	\
+		(n) & (1ULL <<  8) ?  8 :	\
+		(n) & (1ULL <<  7) ?  7 :	\
+		(n) & (1ULL <<  6) ?  6 :	\
+		(n) & (1ULL <<  5) ?  5 :	\
+		(n) & (1ULL <<  4) ?  4 :	\
+		(n) & (1ULL <<  3) ?  3 :	\
+		(n) & (1ULL <<  2) ?  2 :	\
+		1 ) :				\
+	(sizeof(n) <= 4) ?			\
+	__ilog2_u32(n) :			\
+	__ilog2_u64(n)				\
+ )
+
+/**
+ * roundup_pow_of_two - round the given value up to nearest power of two
+ * @n - parameter
+ *
+ * round the given value up to the nearest power of two
+ * - the result is undefined when n == 0
+ * - this can be used to initialise global variables from constant data
+ */
+#define roundup_pow_of_two(n)			\
+(						\
+	__builtin_constant_p(n) ? (		\
+		(n == 1) ? 1 :			\
+		(1UL << (ilog2((n) - 1) + 1))	\
+				   ) :		\
+	__roundup_pow_of_two(n)			\
+ )
+
+/**
+ * rounddown_pow_of_two - round the given value down to nearest power of two
+ * @n - parameter
+ *
+ * round the given value down to the nearest power of two
+ * - the result is undefined when n == 0
+ * - this can be used to initialise global variables from constant data
+ */
+#define rounddown_pow_of_two(n)			\
+(						\
+	__builtin_constant_p(n) ? (		\
+		(1UL << ilog2(n))) :		\
+	__rounddown_pow_of_two(n)		\
+ )
+
+#endif /* _TOOLS_LINUX_LOG2_H */
diff --git a/tools/include/linux/module.h b/tools/include/linux/module.h
new file mode 100644
index 000000000..2c999abf6
--- /dev/null
+++ b/tools/include/linux/module.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LIBLOCKDEP_LINUX_MODULE_H_
+#define _LIBLOCKDEP_LINUX_MODULE_H_
+
+#define module_param(name, type, perm)
+
+static inline bool __is_module_percpu_address(unsigned long addr, unsigned long *can_addr)
+{
+	return false;
+}
+
+#endif
diff --git a/tools/include/linux/mutex.h b/tools/include/linux/mutex.h
new file mode 100644
index 000000000..a8180d25f
--- /dev/null
+++ b/tools/include/linux/mutex.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_INCLUDE_LINUX_MUTEX_H
+#define _TOOLS_INCLUDE_LINUX_MUTEX_H
+
+#endif /* _TOOLS_INCLUDE_LINUX_MUTEX_H */
diff --git a/tools/include/linux/nmi.h b/tools/include/linux/nmi.h
new file mode 100644
index 000000000..e69de29bb
--- /dev/null
+++ b/tools/include/linux/nmi.h
diff --git a/tools/include/linux/overflow.h b/tools/include/linux/overflow.h
new file mode 100644
index 000000000..8712ff709
--- /dev/null
+++ b/tools/include/linux/overflow.h
@@ -0,0 +1,278 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+#ifndef __LINUX_OVERFLOW_H
+#define __LINUX_OVERFLOW_H
+
+#include <linux/compiler.h>
+
+/*
+ * In the fallback code below, we need to compute the minimum and
+ * maximum values representable in a given type. These macros may also
+ * be useful elsewhere, so we provide them outside the
+ * COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW block.
+ *
+ * It would seem more obvious to do something like
+ *
+ * #define type_min(T) (T)(is_signed_type(T) ? (T)1 << (8*sizeof(T)-1) : 0)
+ * #define type_max(T) (T)(is_signed_type(T) ? ((T)1 << (8*sizeof(T)-1)) - 1 : ~(T)0)
+ *
+ * Unfortunately, the middle expressions, strictly speaking, have
+ * undefined behaviour, and at least some versions of gcc warn about
+ * the type_max expression (but not if -fsanitize=undefined is in
+ * effect; in that case, the warning is deferred to runtime...).
+ *
+ * The slightly excessive casting in type_min is to make sure the
+ * macros also produce sensible values for the exotic type _Bool. [The
+ * overflow checkers only almost work for _Bool, but that's
+ * a-feature-not-a-bug, since people shouldn't be doing arithmetic on
+ * _Bools. Besides, the gcc builtins don't allow _Bool* as third
+ * argument.]
+ *
+ * Idea stolen from
+ * https://mail-index.netbsd.org/tech-misc/2007/02/05/0000.html -
+ * credit to Christian Biere.
+ */
+#define is_signed_type(type)       (((type)(-1)) < (type)1)
+#define __type_half_max(type) ((type)1 << (8*sizeof(type) - 1 - is_signed_type(type)))
+#define type_max(T) ((T)((__type_half_max(T) - 1) + __type_half_max(T)))
+#define type_min(T) ((T)((T)-type_max(T)-(T)1))
+
+
+#ifdef COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW
+/*
+ * For simplicity and code hygiene, the fallback code below insists on
+ * a, b and *d having the same type (similar to the min() and max()
+ * macros), whereas gcc's type-generic overflow checkers accept
+ * different types. Hence we don't just make check_add_overflow an
+ * alias for __builtin_add_overflow, but add type checks similar to
+ * below.
+ */
+#define check_add_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	__builtin_add_overflow(__a, __b, __d);	\
+})
+
+#define check_sub_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	__builtin_sub_overflow(__a, __b, __d);	\
+})
+
+#define check_mul_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	__builtin_mul_overflow(__a, __b, __d);	\
+})
+
+#else
+
+
+/* Checking for unsigned overflow is relatively easy without causing UB. */
+#define __unsigned_add_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = __a + __b;			\
+	*__d < __a;				\
+})
+#define __unsigned_sub_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = __a - __b;			\
+	__a < __b;				\
+})
+/*
+ * If one of a or b is a compile-time constant, this avoids a division.
+ */
+#define __unsigned_mul_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);				\
+	typeof(b) __b = (b);				\
+	typeof(d) __d = (d);				\
+	(void) (&__a == &__b);				\
+	(void) (&__a == __d);				\
+	*__d = __a * __b;				\
+	__builtin_constant_p(__b) ?			\
+	  __b > 0 && __a > type_max(typeof(__a)) / __b : \
+	  __a > 0 && __b > type_max(typeof(__b)) / __a;	 \
+})
+
+/*
+ * For signed types, detecting overflow is much harder, especially if
+ * we want to avoid UB. But the interface of these macros is such that
+ * we must provide a result in *d, and in fact we must produce the
+ * result promised by gcc's builtins, which is simply the possibly
+ * wrapped-around value. Fortunately, we can just formally do the
+ * operations in the widest relevant unsigned type (u64) and then
+ * truncate the result - gcc is smart enough to generate the same code
+ * with and without the (u64) casts.
+ */
+
+/*
+ * Adding two signed integers can overflow only if they have the same
+ * sign, and overflow has happened iff the result has the opposite
+ * sign.
+ */
+#define __signed_add_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = (u64)__a + (u64)__b;		\
+	(((~(__a ^ __b)) & (*__d ^ __a))	\
+		& type_min(typeof(__a))) != 0;	\
+})
+
+/*
+ * Subtraction is similar, except that overflow can now happen only
+ * when the signs are opposite. In this case, overflow has happened if
+ * the result has the opposite sign of a.
+ */
+#define __signed_sub_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = (u64)__a - (u64)__b;		\
+	((((__a ^ __b)) & (*__d ^ __a))		\
+		& type_min(typeof(__a))) != 0;	\
+})
+
+/*
+ * Signed multiplication is rather hard. gcc always follows C99, so
+ * division is truncated towards 0. This means that we can write the
+ * overflow check like this:
+ *
+ * (a > 0 && (b > MAX/a || b < MIN/a)) ||
+ * (a < -1 && (b > MIN/a || b < MAX/a) ||
+ * (a == -1 && b == MIN)
+ *
+ * The redundant casts of -1 are to silence an annoying -Wtype-limits
+ * (included in -Wextra) warning: When the type is u8 or u16, the
+ * __b_c_e in check_mul_overflow obviously selects
+ * __unsigned_mul_overflow, but unfortunately gcc still parses this
+ * code and warns about the limited range of __b.
+ */
+
+#define __signed_mul_overflow(a, b, d) ({				\
+	typeof(a) __a = (a);						\
+	typeof(b) __b = (b);						\
+	typeof(d) __d = (d);						\
+	typeof(a) __tmax = type_max(typeof(a));				\
+	typeof(a) __tmin = type_min(typeof(a));				\
+	(void) (&__a == &__b);						\
+	(void) (&__a == __d);						\
+	*__d = (u64)__a * (u64)__b;					\
+	(__b > 0   && (__a > __tmax/__b || __a < __tmin/__b)) ||	\
+	(__b < (typeof(__b))-1  && (__a > __tmin/__b || __a < __tmax/__b)) || \
+	(__b == (typeof(__b))-1 && __a == __tmin);			\
+})
+
+
+#define check_add_overflow(a, b, d)					\
+	__builtin_choose_expr(is_signed_type(typeof(a)),		\
+			__signed_add_overflow(a, b, d),			\
+			__unsigned_add_overflow(a, b, d))
+
+#define check_sub_overflow(a, b, d)					\
+	__builtin_choose_expr(is_signed_type(typeof(a)),		\
+			__signed_sub_overflow(a, b, d),			\
+			__unsigned_sub_overflow(a, b, d))
+
+#define check_mul_overflow(a, b, d)					\
+	__builtin_choose_expr(is_signed_type(typeof(a)),		\
+			__signed_mul_overflow(a, b, d),			\
+			__unsigned_mul_overflow(a, b, d))
+
+
+#endif /* COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW */
+
+/**
+ * array_size() - Calculate size of 2-dimensional array.
+ *
+ * @a: dimension one
+ * @b: dimension two
+ *
+ * Calculates size of 2-dimensional array: @a * @b.
+ *
+ * Returns: number of bytes needed to represent the array or SIZE_MAX on
+ * overflow.
+ */
+static inline __must_check size_t array_size(size_t a, size_t b)
+{
+	size_t bytes;
+
+	if (check_mul_overflow(a, b, &bytes))
+		return SIZE_MAX;
+
+	return bytes;
+}
+
+/**
+ * array3_size() - Calculate size of 3-dimensional array.
+ *
+ * @a: dimension one
+ * @b: dimension two
+ * @c: dimension three
+ *
+ * Calculates size of 3-dimensional array: @a * @b * @c.
+ *
+ * Returns: number of bytes needed to represent the array or SIZE_MAX on
+ * overflow.
+ */
+static inline __must_check size_t array3_size(size_t a, size_t b, size_t c)
+{
+	size_t bytes;
+
+	if (check_mul_overflow(a, b, &bytes))
+		return SIZE_MAX;
+	if (check_mul_overflow(bytes, c, &bytes))
+		return SIZE_MAX;
+
+	return bytes;
+}
+
+static inline __must_check size_t __ab_c_size(size_t n, size_t size, size_t c)
+{
+	size_t bytes;
+
+	if (check_mul_overflow(n, size, &bytes))
+		return SIZE_MAX;
+	if (check_add_overflow(bytes, c, &bytes))
+		return SIZE_MAX;
+
+	return bytes;
+}
+
+/**
+ * struct_size() - Calculate size of structure with trailing array.
+ * @p: Pointer to the structure.
+ * @member: Name of the array member.
+ * @n: Number of elements in the array.
+ *
+ * Calculates size of memory needed for structure @p followed by an
+ * array of @n @member elements.
+ *
+ * Return: number of bytes needed or SIZE_MAX on overflow.
+ */
+#define struct_size(p, member, n)					\
+	__ab_c_size(n,							\
+		    sizeof(*(p)->member) + __must_be_array((p)->member),\
+		    sizeof(*(p)))
+
+#endif /* __LINUX_OVERFLOW_H */
diff --git a/tools/include/linux/poison.h b/tools/include/linux/poison.h
new file mode 100644
index 000000000..9fdcd3eaa
--- /dev/null
+++ b/tools/include/linux/poison.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_POISON_H
+#define _LINUX_POISON_H
+
+/********** include/linux/list.h **********/
+
+/*
+ * Architectures might want to move the poison pointer offset
+ * into some well-recognized area such as 0xdead000000000000,
+ * that is also not mappable by user-space exploits:
+ */
+#ifdef CONFIG_ILLEGAL_POINTER_VALUE
+# define POISON_POINTER_DELTA _AC(CONFIG_ILLEGAL_POINTER_VALUE, UL)
+#else
+# define POISON_POINTER_DELTA 0
+#endif
+
+#ifdef __cplusplus
+#define LIST_POISON1  NULL
+#define LIST_POISON2  NULL
+#else
+/*
+ * These are non-NULL pointers that will result in page faults
+ * under normal circumstances, used to verify that nobody uses
+ * non-initialized list entries.
+ */
+#define LIST_POISON1  ((void *) 0x100 + POISON_POINTER_DELTA)
+#define LIST_POISON2  ((void *) 0x200 + POISON_POINTER_DELTA)
+#endif
+
+/********** include/linux/timer.h **********/
+/*
+ * Magic number "tsta" to indicate a static timer initializer
+ * for the object debugging code.
+ */
+#define TIMER_ENTRY_STATIC	((void *) 0x300 + POISON_POINTER_DELTA)
+
+/********** mm/debug-pagealloc.c **********/
+#ifdef CONFIG_PAGE_POISONING_ZERO
+#define PAGE_POISON 0x00
+#else
+#define PAGE_POISON 0xaa
+#endif
+
+/********** mm/page_alloc.c ************/
+
+#define TAIL_MAPPING	((void *) 0x400 + POISON_POINTER_DELTA)
+
+/********** mm/slab.c **********/
+/*
+ * Magic nums for obj red zoning.
+ * Placed in the first word before and the first word after an obj.
+ */
+#define	RED_INACTIVE	0x09F911029D74E35BULL	/* when obj is inactive */
+#define	RED_ACTIVE	0xD84156C5635688C0ULL	/* when obj is active */
+
+#define SLUB_RED_INACTIVE	0xbb
+#define SLUB_RED_ACTIVE		0xcc
+
+/* ...and for poisoning */
+#define	POISON_INUSE	0x5a	/* for use-uninitialised poisoning */
+#define POISON_FREE	0x6b	/* for use-after-free poisoning */
+#define	POISON_END	0xa5	/* end-byte of poisoning */
+
+/********** arch/$ARCH/mm/init.c **********/
+#define POISON_FREE_INITMEM	0xcc
+
+/********** arch/ia64/hp/common/sba_iommu.c **********/
+/*
+ * arch/ia64/hp/common/sba_iommu.c uses a 16-byte poison string with a
+ * value of "SBAIOMMU POISON\0" for spill-over poisoning.
+ */
+
+/********** fs/jbd/journal.c **********/
+#define JBD_POISON_FREE		0x5b
+#define JBD2_POISON_FREE	0x5c
+
+/********** drivers/base/dmapool.c **********/
+#define	POOL_POISON_FREED	0xa7	/* !inuse */
+#define	POOL_POISON_ALLOCATED	0xa9	/* !initted */
+
+/********** drivers/atm/ **********/
+#define ATM_POISON_FREE		0x12
+#define ATM_POISON		0xdeadbeef
+
+/********** kernel/mutexes **********/
+#define MUTEX_DEBUG_INIT	0x11
+#define MUTEX_DEBUG_FREE	0x22
+
+/********** lib/flex_array.c **********/
+#define FLEX_ARRAY_FREE	0x6c	/* for use-after-free poisoning */
+
+/********** security/ **********/
+#define KEY_DESTROY		0xbd
+
+#endif
diff --git a/tools/include/linux/proc_fs.h b/tools/include/linux/proc_fs.h
new file mode 100644
index 000000000..8b3b03b64
--- /dev/null
+++ b/tools/include/linux/proc_fs.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_INCLUDE_LINUX_PROC_FS_H
+#define _TOOLS_INCLUDE_LINUX_PROC_FS_H
+
+#endif /* _TOOLS_INCLUDE_LINUX_PROC_FS_H */
diff --git a/tools/include/linux/rbtree.h b/tools/include/linux/rbtree.h
new file mode 100644
index 000000000..112582253
--- /dev/null
+++ b/tools/include/linux/rbtree.h
@@ -0,0 +1,104 @@
+/*
+  Red Black Trees
+  (C) 1999  Andrea Arcangeli <andrea@suse.de>
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+  linux/include/linux/rbtree.h
+
+  To use rbtrees you'll have to implement your own insert and search cores.
+  This will avoid us to use callbacks and to drop drammatically performances.
+  I know it's not the cleaner way,  but in C (not in C++) to get
+  performances and genericity...
+
+  See Documentation/rbtree.txt for documentation and samples.
+*/
+
+#ifndef __TOOLS_LINUX_PERF_RBTREE_H
+#define __TOOLS_LINUX_PERF_RBTREE_H
+
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+
+struct rb_node {
+	unsigned long  __rb_parent_color;
+	struct rb_node *rb_right;
+	struct rb_node *rb_left;
+} __attribute__((aligned(sizeof(long))));
+    /* The alignment might seem pointless, but allegedly CRIS needs it */
+
+struct rb_root {
+	struct rb_node *rb_node;
+};
+
+
+#define rb_parent(r)   ((struct rb_node *)((r)->__rb_parent_color & ~3))
+
+#define RB_ROOT	(struct rb_root) { NULL, }
+#define	rb_entry(ptr, type, member) container_of(ptr, type, member)
+
+#define RB_EMPTY_ROOT(root)  ((root)->rb_node == NULL)
+
+/* 'empty' nodes are nodes that are known not to be inserted in an rbtree */
+#define RB_EMPTY_NODE(node)  \
+	((node)->__rb_parent_color == (unsigned long)(node))
+#define RB_CLEAR_NODE(node)  \
+	((node)->__rb_parent_color = (unsigned long)(node))
+
+
+extern void rb_insert_color(struct rb_node *, struct rb_root *);
+extern void rb_erase(struct rb_node *, struct rb_root *);
+
+
+/* Find logical next and previous nodes in a tree */
+extern struct rb_node *rb_next(const struct rb_node *);
+extern struct rb_node *rb_prev(const struct rb_node *);
+extern struct rb_node *rb_first(const struct rb_root *);
+extern struct rb_node *rb_last(const struct rb_root *);
+
+/* Postorder iteration - always visit the parent after its children */
+extern struct rb_node *rb_first_postorder(const struct rb_root *);
+extern struct rb_node *rb_next_postorder(const struct rb_node *);
+
+/* Fast replacement of a single node without remove/rebalance/add/rebalance */
+extern void rb_replace_node(struct rb_node *victim, struct rb_node *new,
+			    struct rb_root *root);
+
+static inline void rb_link_node(struct rb_node *node, struct rb_node *parent,
+				struct rb_node **rb_link)
+{
+	node->__rb_parent_color = (unsigned long)parent;
+	node->rb_left = node->rb_right = NULL;
+
+	*rb_link = node;
+}
+
+#define rb_entry_safe(ptr, type, member) \
+	({ typeof(ptr) ____ptr = (ptr); \
+	   ____ptr ? rb_entry(____ptr, type, member) : NULL; \
+	})
+
+
+/*
+ * Handy for checking that we are not deleting an entry that is
+ * already in a list, found in block/{blk-throttle,cfq-iosched}.c,
+ * probably should be moved to lib/rbtree.c...
+ */
+static inline void rb_erase_init(struct rb_node *n, struct rb_root *root)
+{
+	rb_erase(n, root);
+	RB_CLEAR_NODE(n);
+}
+#endif /* __TOOLS_LINUX_PERF_RBTREE_H */
diff --git a/tools/include/linux/rbtree_augmented.h b/tools/include/linux/rbtree_augmented.h
new file mode 100644
index 000000000..43be941db
--- /dev/null
+++ b/tools/include/linux/rbtree_augmented.h
@@ -0,0 +1,245 @@
+/*
+  Red Black Trees
+  (C) 1999  Andrea Arcangeli <andrea@suse.de>
+  (C) 2002  David Woodhouse <dwmw2@infradead.org>
+  (C) 2012  Michel Lespinasse <walken@google.com>
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+  tools/linux/include/linux/rbtree_augmented.h
+
+  Copied from:
+  linux/include/linux/rbtree_augmented.h
+*/
+
+#ifndef _TOOLS_LINUX_RBTREE_AUGMENTED_H
+#define _TOOLS_LINUX_RBTREE_AUGMENTED_H
+
+#include <linux/compiler.h>
+#include <linux/rbtree.h>
+
+/*
+ * Please note - only struct rb_augment_callbacks and the prototypes for
+ * rb_insert_augmented() and rb_erase_augmented() are intended to be public.
+ * The rest are implementation details you are not expected to depend on.
+ *
+ * See Documentation/rbtree.txt for documentation and samples.
+ */
+
+struct rb_augment_callbacks {
+	void (*propagate)(struct rb_node *node, struct rb_node *stop);
+	void (*copy)(struct rb_node *old, struct rb_node *new);
+	void (*rotate)(struct rb_node *old, struct rb_node *new);
+};
+
+extern void __rb_insert_augmented(struct rb_node *node, struct rb_root *root,
+	void (*augment_rotate)(struct rb_node *old, struct rb_node *new));
+/*
+ * Fixup the rbtree and update the augmented information when rebalancing.
+ *
+ * On insertion, the user must update the augmented information on the path
+ * leading to the inserted node, then call rb_link_node() as usual and
+ * rb_augment_inserted() instead of the usual rb_insert_color() call.
+ * If rb_augment_inserted() rebalances the rbtree, it will callback into
+ * a user provided function to update the augmented information on the
+ * affected subtrees.
+ */
+static inline void
+rb_insert_augmented(struct rb_node *node, struct rb_root *root,
+		    const struct rb_augment_callbacks *augment)
+{
+	__rb_insert_augmented(node, root, augment->rotate);
+}
+
+#define RB_DECLARE_CALLBACKS(rbstatic, rbname, rbstruct, rbfield,	\
+			     rbtype, rbaugmented, rbcompute)		\
+static inline void							\
+rbname ## _propagate(struct rb_node *rb, struct rb_node *stop)		\
+{									\
+	while (rb != stop) {						\
+		rbstruct *node = rb_entry(rb, rbstruct, rbfield);	\
+		rbtype augmented = rbcompute(node);			\
+		if (node->rbaugmented == augmented)			\
+			break;						\
+		node->rbaugmented = augmented;				\
+		rb = rb_parent(&node->rbfield);				\
+	}								\
+}									\
+static inline void							\
+rbname ## _copy(struct rb_node *rb_old, struct rb_node *rb_new)		\
+{									\
+	rbstruct *old = rb_entry(rb_old, rbstruct, rbfield);		\
+	rbstruct *new = rb_entry(rb_new, rbstruct, rbfield);		\
+	new->rbaugmented = old->rbaugmented;				\
+}									\
+static void								\
+rbname ## _rotate(struct rb_node *rb_old, struct rb_node *rb_new)	\
+{									\
+	rbstruct *old = rb_entry(rb_old, rbstruct, rbfield);		\
+	rbstruct *new = rb_entry(rb_new, rbstruct, rbfield);		\
+	new->rbaugmented = old->rbaugmented;				\
+	old->rbaugmented = rbcompute(old);				\
+}									\
+rbstatic const struct rb_augment_callbacks rbname = {			\
+	rbname ## _propagate, rbname ## _copy, rbname ## _rotate	\
+};
+
+
+#define	RB_RED		0
+#define	RB_BLACK	1
+
+#define __rb_parent(pc)    ((struct rb_node *)(pc & ~3))
+
+#define __rb_color(pc)     ((pc) & 1)
+#define __rb_is_black(pc)  __rb_color(pc)
+#define __rb_is_red(pc)    (!__rb_color(pc))
+#define rb_color(rb)       __rb_color((rb)->__rb_parent_color)
+#define rb_is_red(rb)      __rb_is_red((rb)->__rb_parent_color)
+#define rb_is_black(rb)    __rb_is_black((rb)->__rb_parent_color)
+
+static inline void rb_set_parent(struct rb_node *rb, struct rb_node *p)
+{
+	rb->__rb_parent_color = rb_color(rb) | (unsigned long)p;
+}
+
+static inline void rb_set_parent_color(struct rb_node *rb,
+				       struct rb_node *p, int color)
+{
+	rb->__rb_parent_color = (unsigned long)p | color;
+}
+
+static inline void
+__rb_change_child(struct rb_node *old, struct rb_node *new,
+		  struct rb_node *parent, struct rb_root *root)
+{
+	if (parent) {
+		if (parent->rb_left == old)
+			parent->rb_left = new;
+		else
+			parent->rb_right = new;
+	} else
+		root->rb_node = new;
+}
+
+extern void __rb_erase_color(struct rb_node *parent, struct rb_root *root,
+	void (*augment_rotate)(struct rb_node *old, struct rb_node *new));
+
+static __always_inline struct rb_node *
+__rb_erase_augmented(struct rb_node *node, struct rb_root *root,
+		     const struct rb_augment_callbacks *augment)
+{
+	struct rb_node *child = node->rb_right, *tmp = node->rb_left;
+	struct rb_node *parent, *rebalance;
+	unsigned long pc;
+
+	if (!tmp) {
+		/*
+		 * Case 1: node to erase has no more than 1 child (easy!)
+		 *
+		 * Note that if there is one child it must be red due to 5)
+		 * and node must be black due to 4). We adjust colors locally
+		 * so as to bypass __rb_erase_color() later on.
+		 */
+		pc = node->__rb_parent_color;
+		parent = __rb_parent(pc);
+		__rb_change_child(node, child, parent, root);
+		if (child) {
+			child->__rb_parent_color = pc;
+			rebalance = NULL;
+		} else
+			rebalance = __rb_is_black(pc) ? parent : NULL;
+		tmp = parent;
+	} else if (!child) {
+		/* Still case 1, but this time the child is node->rb_left */
+		tmp->__rb_parent_color = pc = node->__rb_parent_color;
+		parent = __rb_parent(pc);
+		__rb_change_child(node, tmp, parent, root);
+		rebalance = NULL;
+		tmp = parent;
+	} else {
+		struct rb_node *successor = child, *child2;
+		tmp = child->rb_left;
+		if (!tmp) {
+			/*
+			 * Case 2: node's successor is its right child
+			 *
+			 *    (n)          (s)
+			 *    / \          / \
+			 *  (x) (s)  ->  (x) (c)
+			 *        \
+			 *        (c)
+			 */
+			parent = successor;
+			child2 = successor->rb_right;
+			augment->copy(node, successor);
+		} else {
+			/*
+			 * Case 3: node's successor is leftmost under
+			 * node's right child subtree
+			 *
+			 *    (n)          (s)
+			 *    / \          / \
+			 *  (x) (y)  ->  (x) (y)
+			 *      /            /
+			 *    (p)          (p)
+			 *    /            /
+			 *  (s)          (c)
+			 *    \
+			 *    (c)
+			 */
+			do {
+				parent = successor;
+				successor = tmp;
+				tmp = tmp->rb_left;
+			} while (tmp);
+			parent->rb_left = child2 = successor->rb_right;
+			successor->rb_right = child;
+			rb_set_parent(child, successor);
+			augment->copy(node, successor);
+			augment->propagate(parent, successor);
+		}
+
+		successor->rb_left = tmp = node->rb_left;
+		rb_set_parent(tmp, successor);
+
+		pc = node->__rb_parent_color;
+		tmp = __rb_parent(pc);
+		__rb_change_child(node, successor, tmp, root);
+		if (child2) {
+			successor->__rb_parent_color = pc;
+			rb_set_parent_color(child2, parent, RB_BLACK);
+			rebalance = NULL;
+		} else {
+			unsigned long pc2 = successor->__rb_parent_color;
+			successor->__rb_parent_color = pc;
+			rebalance = __rb_is_black(pc2) ? parent : NULL;
+		}
+		tmp = successor;
+	}
+
+	augment->propagate(tmp, NULL);
+	return rebalance;
+}
+
+static __always_inline void
+rb_erase_augmented(struct rb_node *node, struct rb_root *root,
+		   const struct rb_augment_callbacks *augment)
+{
+	struct rb_node *rebalance = __rb_erase_augmented(node, root, augment);
+	if (rebalance)
+		__rb_erase_color(rebalance, root, augment->rotate);
+}
+
+#endif	/* _TOOLS_LINUX_RBTREE_AUGMENTED_H */
diff --git a/tools/include/linux/rcu.h b/tools/include/linux/rcu.h
new file mode 100644
index 000000000..7d02527e5
--- /dev/null
+++ b/tools/include/linux/rcu.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LIBLOCKDEP_RCU_H_
+#define _LIBLOCKDEP_RCU_H_
+
+int rcu_scheduler_active;
+
+static inline int rcu_lockdep_current_cpu_online(void)
+{
+	return 1;
+}
+
+static inline int rcu_is_cpu_idle(void)
+{
+	return 1;
+}
+
+static inline bool rcu_is_watching(void)
+{
+	return false;
+}
+
+#define rcu_assign_pointer(p, v) ((p) = (v))
+#define RCU_INIT_POINTER(p, v) p=(v)
+
+#endif
diff --git a/tools/include/linux/refcount.h b/tools/include/linux/refcount.h
new file mode 100644
index 000000000..36cb29bc5
--- /dev/null
+++ b/tools/include/linux/refcount.h
@@ -0,0 +1,152 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_REFCOUNT_H
+#define _TOOLS_LINUX_REFCOUNT_H
+
+/*
+ * Variant of atomic_t specialized for reference counts.
+ *
+ * The interface matches the atomic_t interface (to aid in porting) but only
+ * provides the few functions one should use for reference counting.
+ *
+ * It differs in that the counter saturates at UINT_MAX and will not move once
+ * there. This avoids wrapping the counter and causing 'spurious'
+ * use-after-free issues.
+ *
+ * Memory ordering rules are slightly relaxed wrt regular atomic_t functions
+ * and provide only what is strictly required for refcounts.
+ *
+ * The increments are fully relaxed; these will not provide ordering. The
+ * rationale is that whatever is used to obtain the object we're increasing the
+ * reference count on will provide the ordering. For locked data structures,
+ * its the lock acquire, for RCU/lockless data structures its the dependent
+ * load.
+ *
+ * Do note that inc_not_zero() provides a control dependency which will order
+ * future stores against the inc, this ensures we'll never modify the object
+ * if we did not in fact acquire a reference.
+ *
+ * The decrements will provide release order, such that all the prior loads and
+ * stores will be issued before, it also provides a control dependency, which
+ * will order us against the subsequent free().
+ *
+ * The control dependency is against the load of the cmpxchg (ll/sc) that
+ * succeeded. This means the stores aren't fully ordered, but this is fine
+ * because the 1->0 transition indicates no concurrency.
+ *
+ * Note that the allocator is responsible for ordering things between free()
+ * and alloc().
+ *
+ */
+
+#include <linux/atomic.h>
+#include <linux/kernel.h>
+
+#ifdef NDEBUG
+#define REFCOUNT_WARN(cond, str) (void)(cond)
+#define __refcount_check
+#else
+#define REFCOUNT_WARN(cond, str) BUG_ON(cond)
+#define __refcount_check	__must_check
+#endif
+
+typedef struct refcount_struct {
+	atomic_t refs;
+} refcount_t;
+
+#define REFCOUNT_INIT(n)	{ .refs = ATOMIC_INIT(n), }
+
+static inline void refcount_set(refcount_t *r, unsigned int n)
+{
+	atomic_set(&r->refs, n);
+}
+
+static inline unsigned int refcount_read(const refcount_t *r)
+{
+	return atomic_read(&r->refs);
+}
+
+/*
+ * Similar to atomic_inc_not_zero(), will saturate at UINT_MAX and WARN.
+ *
+ * Provides no memory ordering, it is assumed the caller has guaranteed the
+ * object memory to be stable (RCU, etc.). It does provide a control dependency
+ * and thereby orders future stores. See the comment on top.
+ */
+static inline __refcount_check
+bool refcount_inc_not_zero(refcount_t *r)
+{
+	unsigned int old, new, val = atomic_read(&r->refs);
+
+	for (;;) {
+		new = val + 1;
+
+		if (!val)
+			return false;
+
+		if (unlikely(!new))
+			return true;
+
+		old = atomic_cmpxchg_relaxed(&r->refs, val, new);
+		if (old == val)
+			break;
+
+		val = old;
+	}
+
+	REFCOUNT_WARN(new == UINT_MAX, "refcount_t: saturated; leaking memory.\n");
+
+	return true;
+}
+
+/*
+ * Similar to atomic_inc(), will saturate at UINT_MAX and WARN.
+ *
+ * Provides no memory ordering, it is assumed the caller already has a
+ * reference on the object, will WARN when this is not so.
+ */
+static inline void refcount_inc(refcount_t *r)
+{
+	REFCOUNT_WARN(!refcount_inc_not_zero(r), "refcount_t: increment on 0; use-after-free.\n");
+}
+
+/*
+ * Similar to atomic_dec_and_test(), it will WARN on underflow and fail to
+ * decrement when saturated at UINT_MAX.
+ *
+ * Provides release memory ordering, such that prior loads and stores are done
+ * before, and provides a control dependency such that free() must come after.
+ * See the comment on top.
+ */
+static inline __refcount_check
+bool refcount_sub_and_test(unsigned int i, refcount_t *r)
+{
+	unsigned int old, new, val = atomic_read(&r->refs);
+
+	for (;;) {
+		if (unlikely(val == UINT_MAX))
+			return false;
+
+		new = val - i;
+		if (new > val) {
+			REFCOUNT_WARN(new > val, "refcount_t: underflow; use-after-free.\n");
+			return false;
+		}
+
+		old = atomic_cmpxchg_release(&r->refs, val, new);
+		if (old == val)
+			break;
+
+		val = old;
+	}
+
+	return !new;
+}
+
+static inline __refcount_check
+bool refcount_dec_and_test(refcount_t *r)
+{
+	return refcount_sub_and_test(1, r);
+}
+
+
+#endif /* _ATOMIC_LINUX_REFCOUNT_H */
diff --git a/tools/include/linux/sched/clock.h b/tools/include/linux/sched/clock.h
new file mode 100644
index 000000000..5837d17c4
--- /dev/null
+++ b/tools/include/linux/sched/clock.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_PERF_LINUX_SCHED_CLOCK_H
+#define _TOOLS_PERF_LINUX_SCHED_CLOCK_H
+
+#endif  /* _TOOLS_PERF_LINUX_SCHED_CLOCK_H */
diff --git a/tools/include/linux/sched/mm.h b/tools/include/linux/sched/mm.h
new file mode 100644
index 000000000..c8d9f19c1
--- /dev/null
+++ b/tools/include/linux/sched/mm.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_PERF_LINUX_SCHED_MM_H
+#define _TOOLS_PERF_LINUX_SCHED_MM_H
+
+#endif  /* _TOOLS_PERF_LINUX_SCHED_MM_H */
diff --git a/tools/include/linux/sched/task.h b/tools/include/linux/sched/task.h
new file mode 100644
index 000000000..a97890eca
--- /dev/null
+++ b/tools/include/linux/sched/task.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_PERF_LINUX_SCHED_TASK_H
+#define _TOOLS_PERF_LINUX_SCHED_TASK_H
+
+#endif  /* _TOOLS_PERF_LINUX_SCHED_TASK_H */
diff --git a/tools/include/linux/seq_file.h b/tools/include/linux/seq_file.h
new file mode 100644
index 000000000..102fd9217
--- /dev/null
+++ b/tools/include/linux/seq_file.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_INCLUDE_LINUX_SEQ_FILE_H
+#define _TOOLS_INCLUDE_LINUX_SEQ_FILE_H
+
+#endif /* _TOOLS_INCLUDE_LINUX_SEQ_FILE_H */
diff --git a/tools/include/linux/spinlock.h b/tools/include/linux/spinlock.h
new file mode 100644
index 000000000..1738c0391
--- /dev/null
+++ b/tools/include/linux/spinlock.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_SPINLOCK_H_
+#define __LINUX_SPINLOCK_H_
+
+#include <pthread.h>
+#include <stdbool.h>
+
+#define spinlock_t		pthread_mutex_t
+#define DEFINE_SPINLOCK(x)	pthread_mutex_t x = PTHREAD_MUTEX_INITIALIZER
+#define __SPIN_LOCK_UNLOCKED(x)	(pthread_mutex_t)PTHREAD_MUTEX_INITIALIZER
+#define spin_lock_init(x)      pthread_mutex_init(x, NULL)
+
+#define spin_lock_irqsave(x, f)		(void)f, pthread_mutex_lock(x)
+#define spin_unlock_irqrestore(x, f)	(void)f, pthread_mutex_unlock(x)
+
+#define arch_spinlock_t pthread_mutex_t
+#define __ARCH_SPIN_LOCK_UNLOCKED PTHREAD_MUTEX_INITIALIZER
+
+static inline void arch_spin_lock(arch_spinlock_t *mutex)
+{
+	pthread_mutex_lock(mutex);
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *mutex)
+{
+	pthread_mutex_unlock(mutex);
+}
+
+static inline bool arch_spin_is_locked(arch_spinlock_t *mutex)
+{
+	return true;
+}
+
+#endif
diff --git a/tools/include/linux/stacktrace.h b/tools/include/linux/stacktrace.h
new file mode 100644
index 000000000..ae343ac35
--- /dev/null
+++ b/tools/include/linux/stacktrace.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LIBLOCKDEP_LINUX_STACKTRACE_H_
+#define _LIBLOCKDEP_LINUX_STACKTRACE_H_
+
+#include <execinfo.h>
+
+struct stack_trace {
+	unsigned int nr_entries, max_entries;
+	unsigned long *entries;
+	int skip;
+};
+
+static inline void print_stack_trace(struct stack_trace *trace, int spaces)
+{
+	backtrace_symbols_fd((void **)trace->entries, trace->nr_entries, 1);
+}
+
+#define save_stack_trace(trace)	\
+	((trace)->nr_entries =	\
+		backtrace((void **)(trace)->entries, (trace)->max_entries))
+
+static inline int dump_stack(void)
+{
+	void *array[64];
+	size_t size;
+
+	size = backtrace(array, 64);
+	backtrace_symbols_fd(array, size, 1);
+
+	return 0;
+}
+
+#endif
diff --git a/tools/include/linux/string.h b/tools/include/linux/string.h
new file mode 100644
index 000000000..0ec646f12
--- /dev/null
+++ b/tools/include/linux/string.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_STRING_H_
+#define _TOOLS_LINUX_STRING_H_
+
+#include <linux/types.h>	/* for size_t */
+#include <string.h>
+
+void *memdup(const void *src, size_t len);
+
+int strtobool(const char *s, bool *res);
+
+/*
+ * glibc based builds needs the extern while uClibc doesn't.
+ * However uClibc headers also define __GLIBC__ hence the hack below
+ */
+#if defined(__GLIBC__) && !defined(__UCLIBC__)
+// pragma diagnostic was introduced in gcc 4.6
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wredundant-decls"
+#endif
+extern size_t strlcpy(char *dest, const char *src, size_t size);
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic pop
+#endif
+#endif
+
+char *str_error_r(int errnum, char *buf, size_t buflen);
+
+/**
+ * strstarts - does @str start with @prefix?
+ * @str: string to examine
+ * @prefix: prefix to look for.
+ */
+static inline bool strstarts(const char *str, const char *prefix)
+{
+	return strncmp(str, prefix, strlen(prefix)) == 0;
+}
+
+#endif /* _LINUX_STRING_H_ */
diff --git a/tools/include/linux/stringify.h b/tools/include/linux/stringify.h
new file mode 100644
index 000000000..60e2c187d
--- /dev/null
+++ b/tools/include/linux/stringify.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_STRINGIFY_H
+#define __LINUX_STRINGIFY_H
+
+/* Indirect stringification.  Doing two levels allows the parameter to be a
+ * macro itself.  For example, compile with -DFOO=bar, __stringify(FOO)
+ * converts to "bar".
+ */
+
+#define __stringify_1(x...)	#x
+#define __stringify(x...)	__stringify_1(x)
+
+#endif	/* !__LINUX_STRINGIFY_H */
diff --git a/tools/include/linux/time64.h b/tools/include/linux/time64.h
new file mode 100644
index 000000000..55fa644b9
--- /dev/null
+++ b/tools/include/linux/time64.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_TIME64_H
+#define _TOOLS_LINUX_TIME64_H
+
+#define MSEC_PER_SEC	1000L
+#define USEC_PER_MSEC	1000L
+#define NSEC_PER_USEC	1000L
+#define NSEC_PER_MSEC	1000000L
+#define USEC_PER_SEC	1000000L
+#define NSEC_PER_SEC	1000000000L
+#define FSEC_PER_SEC	1000000000000000LL
+
+#endif /* _LINUX_TIME64_H */
diff --git a/tools/include/linux/types.h b/tools/include/linux/types.h
new file mode 100644
index 000000000..154eb4e3c
--- /dev/null
+++ b/tools/include/linux/types.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_TYPES_H_
+#define _TOOLS_LINUX_TYPES_H_
+
+#include <stdbool.h>
+#include <stddef.h>
+#include <stdint.h>
+
+#define __SANE_USERSPACE_TYPES__	/* For PPC64, to get LL64 types */
+#include <asm/types.h>
+#include <asm/posix_types.h>
+
+struct page;
+struct kmem_cache;
+
+typedef enum {
+	GFP_KERNEL,
+	GFP_ATOMIC,
+	__GFP_HIGHMEM,
+	__GFP_HIGH
+} gfp_t;
+
+/*
+ * We define u64 as uint64_t for every architecture
+ * so that we can print it with "%"PRIx64 without getting warnings.
+ *
+ * typedef __u64 u64;
+ * typedef __s64 s64;
+ */
+typedef uint64_t u64;
+typedef int64_t s64;
+
+typedef __u32 u32;
+typedef __s32 s32;
+
+typedef __u16 u16;
+typedef __s16 s16;
+
+typedef __u8  u8;
+typedef __s8  s8;
+
+#ifdef __CHECKER__
+#define __bitwise__ __attribute__((bitwise))
+#else
+#define __bitwise__
+#endif
+#define __bitwise __bitwise__
+
+#define __force
+#define __user
+#define __must_check
+#define __cold
+
+typedef __u16 __bitwise __le16;
+typedef __u16 __bitwise __be16;
+typedef __u32 __bitwise __le32;
+typedef __u32 __bitwise __be32;
+typedef __u64 __bitwise __le64;
+typedef __u64 __bitwise __be64;
+
+typedef struct {
+	int counter;
+} atomic_t;
+
+#ifndef __aligned_u64
+# define __aligned_u64 __u64 __attribute__((aligned(8)))
+#endif
+
+struct list_head {
+	struct list_head *next, *prev;
+};
+
+struct hlist_head {
+	struct hlist_node *first;
+};
+
+struct hlist_node {
+	struct hlist_node *next, **pprev;
+};
+
+#endif /* _TOOLS_LINUX_TYPES_H_ */
diff --git a/tools/include/linux/unaligned/packed_struct.h b/tools/include/linux/unaligned/packed_struct.h
new file mode 100644
index 000000000..dbd93c7df
--- /dev/null
+++ b/tools/include/linux/unaligned/packed_struct.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_UNALIGNED_PACKED_STRUCT_H
+#define _LINUX_UNALIGNED_PACKED_STRUCT_H
+
+#include <linux/kernel.h>
+
+struct __una_u16 { u16 x; } __packed;
+struct __una_u32 { u32 x; } __packed;
+struct __una_u64 { u64 x; } __packed;
+
+static inline u16 __get_unaligned_cpu16(const void *p)
+{
+	const struct __una_u16 *ptr = (const struct __una_u16 *)p;
+	return ptr->x;
+}
+
+static inline u32 __get_unaligned_cpu32(const void *p)
+{
+	const struct __una_u32 *ptr = (const struct __una_u32 *)p;
+	return ptr->x;
+}
+
+static inline u64 __get_unaligned_cpu64(const void *p)
+{
+	const struct __una_u64 *ptr = (const struct __una_u64 *)p;
+	return ptr->x;
+}
+
+static inline void __put_unaligned_cpu16(u16 val, void *p)
+{
+	struct __una_u16 *ptr = (struct __una_u16 *)p;
+	ptr->x = val;
+}
+
+static inline void __put_unaligned_cpu32(u32 val, void *p)
+{
+	struct __una_u32 *ptr = (struct __una_u32 *)p;
+	ptr->x = val;
+}
+
+static inline void __put_unaligned_cpu64(u64 val, void *p)
+{
+	struct __una_u64 *ptr = (struct __una_u64 *)p;
+	ptr->x = val;
+}
+
+#endif /* _LINUX_UNALIGNED_PACKED_STRUCT_H */
diff --git a/tools/include/tools/be_byteshift.h b/tools/include/tools/be_byteshift.h
new file mode 100644
index 000000000..f7d1d1698
--- /dev/null
+++ b/tools/include/tools/be_byteshift.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_BE_BYTESHIFT_H
+#define _TOOLS_BE_BYTESHIFT_H
+
+#include <stdint.h>
+
+static inline uint16_t __get_unaligned_be16(const uint8_t *p)
+{
+	return p[0] << 8 | p[1];
+}
+
+static inline uint32_t __get_unaligned_be32(const uint8_t *p)
+{
+	return p[0] << 24 | p[1] << 16 | p[2] << 8 | p[3];
+}
+
+static inline uint64_t __get_unaligned_be64(const uint8_t *p)
+{
+	return (uint64_t)__get_unaligned_be32(p) << 32 |
+	       __get_unaligned_be32(p + 4);
+}
+
+static inline void __put_unaligned_be16(uint16_t val, uint8_t *p)
+{
+	*p++ = val >> 8;
+	*p++ = val;
+}
+
+static inline void __put_unaligned_be32(uint32_t val, uint8_t *p)
+{
+	__put_unaligned_be16(val >> 16, p);
+	__put_unaligned_be16(val, p + 2);
+}
+
+static inline void __put_unaligned_be64(uint64_t val, uint8_t *p)
+{
+	__put_unaligned_be32(val >> 32, p);
+	__put_unaligned_be32(val, p + 4);
+}
+
+static inline uint16_t get_unaligned_be16(const void *p)
+{
+	return __get_unaligned_be16((const uint8_t *)p);
+}
+
+static inline uint32_t get_unaligned_be32(const void *p)
+{
+	return __get_unaligned_be32((const uint8_t *)p);
+}
+
+static inline uint64_t get_unaligned_be64(const void *p)
+{
+	return __get_unaligned_be64((const uint8_t *)p);
+}
+
+static inline void put_unaligned_be16(uint16_t val, void *p)
+{
+	__put_unaligned_be16(val, p);
+}
+
+static inline void put_unaligned_be32(uint32_t val, void *p)
+{
+	__put_unaligned_be32(val, p);
+}
+
+static inline void put_unaligned_be64(uint64_t val, void *p)
+{
+	__put_unaligned_be64(val, p);
+}
+
+#endif /* _TOOLS_BE_BYTESHIFT_H */
diff --git a/tools/include/tools/config.h b/tools/include/tools/config.h
new file mode 100644
index 000000000..08ade7df8
--- /dev/null
+++ b/tools/include/tools/config.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_CONFIG_H
+#define _TOOLS_CONFIG_H
+
+/* Subset of include/linux/kconfig.h */
+
+#define __ARG_PLACEHOLDER_1 0,
+#define __take_second_arg(__ignored, val, ...) val
+
+/*
+ * Helper macros to use CONFIG_ options in C/CPP expressions. Note that
+ * these only work with boolean and tristate options.
+ */
+
+/*
+ * Getting something that works in C and CPP for an arg that may or may
+ * not be defined is tricky.  Here, if we have "#define CONFIG_BOOGER 1"
+ * we match on the placeholder define, insert the "0," for arg1 and generate
+ * the triplet (0, 1, 0).  Then the last step cherry picks the 2nd arg (a one).
+ * When CONFIG_BOOGER is not defined, we generate a (... 1, 0) pair, and when
+ * the last step cherry picks the 2nd arg, we get a zero.
+ */
+#define __is_defined(x)			___is_defined(x)
+#define ___is_defined(val)		____is_defined(__ARG_PLACEHOLDER_##val)
+#define ____is_defined(arg1_or_junk)	__take_second_arg(arg1_or_junk 1, 0)
+
+/*
+ * IS_BUILTIN(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y', 0
+ * otherwise. For boolean options, this is equivalent to
+ * IS_ENABLED(CONFIG_FOO).
+ */
+#define IS_BUILTIN(option) __is_defined(option)
+
+#endif /* _TOOLS_CONFIG_H */
diff --git a/tools/include/tools/endian.h b/tools/include/tools/endian.h
new file mode 100644
index 000000000..c67888fd4
--- /dev/null
+++ b/tools/include/tools/endian.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_ENDIAN_H
+#define _TOOLS_ENDIAN_H
+
+#include <byteswap.h>
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+
+#ifndef htole16
+#define htole16(x) (x)
+#endif
+#ifndef htole32
+#define htole32(x) (x)
+#endif
+#ifndef htole64
+#define htole64(x) (x)
+#endif
+
+#ifndef le16toh
+#define le16toh(x) (x)
+#endif
+
+#ifndef le32toh
+#define le32toh(x) (x)
+#endif
+
+#ifndef le64toh
+#define le64toh(x) (x)
+#endif
+
+#else /* __BYTE_ORDER */
+
+#ifndef htole16
+#define htole16(x) __bswap_16(x)
+#endif
+#ifndef htole32
+#define htole32(x) __bswap_32(x)
+#endif
+#ifndef htole64
+#define htole64(x) __bswap_64(x)
+#endif
+
+#ifndef le16toh
+#define le16toh(x) __bswap_16(x)
+#endif
+
+#ifndef le32toh
+#define le32toh(x) __bswap_32(x)
+#endif
+
+#ifndef le64toh
+#define le64toh(x) __bswap_64(x)
+#endif
+
+#endif
+
+#endif /* _TOOLS_ENDIAN_H */
diff --git a/tools/include/tools/le_byteshift.h b/tools/include/tools/le_byteshift.h
new file mode 100644
index 000000000..dc8565f39
--- /dev/null
+++ b/tools/include/tools/le_byteshift.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LE_BYTESHIFT_H
+#define _TOOLS_LE_BYTESHIFT_H
+
+#include <stdint.h>
+
+static inline uint16_t __get_unaligned_le16(const uint8_t *p)
+{
+	return p[0] | p[1] << 8;
+}
+
+static inline uint32_t __get_unaligned_le32(const uint8_t *p)
+{
+	return p[0] | p[1] << 8 | p[2] << 16 | p[3] << 24;
+}
+
+static inline uint64_t __get_unaligned_le64(const uint8_t *p)
+{
+	return (uint64_t)__get_unaligned_le32(p + 4) << 32 |
+	       __get_unaligned_le32(p);
+}
+
+static inline void __put_unaligned_le16(uint16_t val, uint8_t *p)
+{
+	*p++ = val;
+	*p++ = val >> 8;
+}
+
+static inline void __put_unaligned_le32(uint32_t val, uint8_t *p)
+{
+	__put_unaligned_le16(val >> 16, p + 2);
+	__put_unaligned_le16(val, p);
+}
+
+static inline void __put_unaligned_le64(uint64_t val, uint8_t *p)
+{
+	__put_unaligned_le32(val >> 32, p + 4);
+	__put_unaligned_le32(val, p);
+}
+
+static inline uint16_t get_unaligned_le16(const void *p)
+{
+	return __get_unaligned_le16((const uint8_t *)p);
+}
+
+static inline uint32_t get_unaligned_le32(const void *p)
+{
+	return __get_unaligned_le32((const uint8_t *)p);
+}
+
+static inline uint64_t get_unaligned_le64(const void *p)
+{
+	return __get_unaligned_le64((const uint8_t *)p);
+}
+
+static inline void put_unaligned_le16(uint16_t val, void *p)
+{
+	__put_unaligned_le16(val, p);
+}
+
+static inline void put_unaligned_le32(uint32_t val, void *p)
+{
+	__put_unaligned_le32(val, p);
+}
+
+static inline void put_unaligned_le64(uint64_t val, void *p)
+{
+	__put_unaligned_le64(val, p);
+}
+
+#endif /* _TOOLS_LE_BYTESHIFT_H */
diff --git a/tools/include/tools/libc_compat.h b/tools/include/tools/libc_compat.h
new file mode 100644
index 000000000..e907ba6f1
--- /dev/null
+++ b/tools/include/tools/libc_compat.h
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (LGPL-2.0+ OR BSD-2-Clause)
+/* Copyright (C) 2018 Netronome Systems, Inc. */
+
+#ifndef __TOOLS_LIBC_COMPAT_H
+#define __TOOLS_LIBC_COMPAT_H
+
+#include <stdlib.h>
+#include <linux/overflow.h>
+
+#ifdef COMPAT_NEED_REALLOCARRAY
+static inline void *reallocarray(void *ptr, size_t nmemb, size_t size)
+{
+	size_t bytes;
+
+	if (unlikely(check_mul_overflow(nmemb, size, &bytes)))
+		return NULL;
+	return realloc(ptr, bytes);
+}
+#endif
+#endif
diff --git a/tools/include/trace/events/lock.h b/tools/include/trace/events/lock.h
new file mode 100644
index 000000000..5b15fd5ee
--- /dev/null
+++ b/tools/include/trace/events/lock.h
@@ -0,0 +1,4 @@
+#ifndef _TOOLS_INCLUDE_TRACE_EVENTS_LOCK_H
+#define _TOOLS_INCLUDE_TRACE_EVENTS_LOCK_H
+
+#endif /* _TOOLS_INCLUDE_TRACE_EVENTS_LOCK_H */
diff --git a/tools/include/uapi/asm-generic/bitsperlong.h b/tools/include/uapi/asm-generic/bitsperlong.h
new file mode 100644
index 000000000..23e6c416b
--- /dev/null
+++ b/tools/include/uapi/asm-generic/bitsperlong.h
@@ -0,0 +1,15 @@
+#ifndef _UAPI__ASM_GENERIC_BITS_PER_LONG
+#define _UAPI__ASM_GENERIC_BITS_PER_LONG
+
+/*
+ * There seems to be no way of detecting this automatically from user
+ * space, so 64 bit architectures should override this in their
+ * bitsperlong.h. In particular, an architecture that supports
+ * both 32 and 64 bit user space must not rely on CONFIG_64BIT
+ * to decide it, but rather check a compiler provided macro.
+ */
+#ifndef __BITS_PER_LONG
+#define __BITS_PER_LONG 32
+#endif
+
+#endif /* _UAPI__ASM_GENERIC_BITS_PER_LONG */
diff --git a/tools/include/uapi/asm-generic/bpf_perf_event.h b/tools/include/uapi/asm-generic/bpf_perf_event.h
new file mode 100644
index 000000000..53815d2cd
--- /dev/null
+++ b/tools/include/uapi/asm-generic/bpf_perf_event.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI__ASM_GENERIC_BPF_PERF_EVENT_H__
+#define _UAPI__ASM_GENERIC_BPF_PERF_EVENT_H__
+
+#include <linux/ptrace.h>
+
+/* Export kernel pt_regs structure */
+typedef struct pt_regs bpf_user_pt_regs_t;
+
+#endif /* _UAPI__ASM_GENERIC_BPF_PERF_EVENT_H__ */
diff --git a/tools/include/uapi/asm-generic/errno-base.h b/tools/include/uapi/asm-generic/errno-base.h
new file mode 100644
index 000000000..9653140bf
--- /dev/null
+++ b/tools/include/uapi/asm-generic/errno-base.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_GENERIC_ERRNO_BASE_H
+#define _ASM_GENERIC_ERRNO_BASE_H
+
+#define	EPERM		 1	/* Operation not permitted */
+#define	ENOENT		 2	/* No such file or directory */
+#define	ESRCH		 3	/* No such process */
+#define	EINTR		 4	/* Interrupted system call */
+#define	EIO		 5	/* I/O error */
+#define	ENXIO		 6	/* No such device or address */
+#define	E2BIG		 7	/* Argument list too long */
+#define	ENOEXEC		 8	/* Exec format error */
+#define	EBADF		 9	/* Bad file number */
+#define	ECHILD		10	/* No child processes */
+#define	EAGAIN		11	/* Try again */
+#define	ENOMEM		12	/* Out of memory */
+#define	EACCES		13	/* Permission denied */
+#define	EFAULT		14	/* Bad address */
+#define	ENOTBLK		15	/* Block device required */
+#define	EBUSY		16	/* Device or resource busy */
+#define	EEXIST		17	/* File exists */
+#define	EXDEV		18	/* Cross-device link */
+#define	ENODEV		19	/* No such device */
+#define	ENOTDIR		20	/* Not a directory */
+#define	EISDIR		21	/* Is a directory */
+#define	EINVAL		22	/* Invalid argument */
+#define	ENFILE		23	/* File table overflow */
+#define	EMFILE		24	/* Too many open files */
+#define	ENOTTY		25	/* Not a typewriter */
+#define	ETXTBSY		26	/* Text file busy */
+#define	EFBIG		27	/* File too large */
+#define	ENOSPC		28	/* No space left on device */
+#define	ESPIPE		29	/* Illegal seek */
+#define	EROFS		30	/* Read-only file system */
+#define	EMLINK		31	/* Too many links */
+#define	EPIPE		32	/* Broken pipe */
+#define	EDOM		33	/* Math argument out of domain of func */
+#define	ERANGE		34	/* Math result not representable */
+
+#endif
diff --git a/tools/include/uapi/asm-generic/errno.h b/tools/include/uapi/asm-generic/errno.h
new file mode 100644
index 000000000..cf9c51ac4
--- /dev/null
+++ b/tools/include/uapi/asm-generic/errno.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_GENERIC_ERRNO_H
+#define _ASM_GENERIC_ERRNO_H
+
+#include <asm-generic/errno-base.h>
+
+#define	EDEADLK		35	/* Resource deadlock would occur */
+#define	ENAMETOOLONG	36	/* File name too long */
+#define	ENOLCK		37	/* No record locks available */
+
+/*
+ * This error code is special: arch syscall entry code will return
+ * -ENOSYS if users try to call a syscall that doesn't exist.  To keep
+ * failures of syscalls that really do exist distinguishable from
+ * failures due to attempts to use a nonexistent syscall, syscall
+ * implementations should refrain from returning -ENOSYS.
+ */
+#define	ENOSYS		38	/* Invalid system call number */
+
+#define	ENOTEMPTY	39	/* Directory not empty */
+#define	ELOOP		40	/* Too many symbolic links encountered */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	ENOMSG		42	/* No message of desired type */
+#define	EIDRM		43	/* Identifier removed */
+#define	ECHRNG		44	/* Channel number out of range */
+#define	EL2NSYNC	45	/* Level 2 not synchronized */
+#define	EL3HLT		46	/* Level 3 halted */
+#define	EL3RST		47	/* Level 3 reset */
+#define	ELNRNG		48	/* Link number out of range */
+#define	EUNATCH		49	/* Protocol driver not attached */
+#define	ENOCSI		50	/* No CSI structure available */
+#define	EL2HLT		51	/* Level 2 halted */
+#define	EBADE		52	/* Invalid exchange */
+#define	EBADR		53	/* Invalid request descriptor */
+#define	EXFULL		54	/* Exchange full */
+#define	ENOANO		55	/* No anode */
+#define	EBADRQC		56	/* Invalid request code */
+#define	EBADSLT		57	/* Invalid slot */
+
+#define	EDEADLOCK	EDEADLK
+
+#define	EBFONT		59	/* Bad font file format */
+#define	ENOSTR		60	/* Device not a stream */
+#define	ENODATA		61	/* No data available */
+#define	ETIME		62	/* Timer expired */
+#define	ENOSR		63	/* Out of streams resources */
+#define	ENONET		64	/* Machine is not on the network */
+#define	ENOPKG		65	/* Package not installed */
+#define	EREMOTE		66	/* Object is remote */
+#define	ENOLINK		67	/* Link has been severed */
+#define	EADV		68	/* Advertise error */
+#define	ESRMNT		69	/* Srmount error */
+#define	ECOMM		70	/* Communication error on send */
+#define	EPROTO		71	/* Protocol error */
+#define	EMULTIHOP	72	/* Multihop attempted */
+#define	EDOTDOT		73	/* RFS specific error */
+#define	EBADMSG		74	/* Not a data message */
+#define	EOVERFLOW	75	/* Value too large for defined data type */
+#define	ENOTUNIQ	76	/* Name not unique on network */
+#define	EBADFD		77	/* File descriptor in bad state */
+#define	EREMCHG		78	/* Remote address changed */
+#define	ELIBACC		79	/* Can not access a needed shared library */
+#define	ELIBBAD		80	/* Accessing a corrupted shared library */
+#define	ELIBSCN		81	/* .lib section in a.out corrupted */
+#define	ELIBMAX		82	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	83	/* Cannot exec a shared library directly */
+#define	EILSEQ		84	/* Illegal byte sequence */
+#define	ERESTART	85	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	86	/* Streams pipe error */
+#define	EUSERS		87	/* Too many users */
+#define	ENOTSOCK	88	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	89	/* Destination address required */
+#define	EMSGSIZE	90	/* Message too long */
+#define	EPROTOTYPE	91	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	92	/* Protocol not available */
+#define	EPROTONOSUPPORT	93	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	94	/* Socket type not supported */
+#define	EOPNOTSUPP	95	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	96	/* Protocol family not supported */
+#define	EAFNOSUPPORT	97	/* Address family not supported by protocol */
+#define	EADDRINUSE	98	/* Address already in use */
+#define	EADDRNOTAVAIL	99	/* Cannot assign requested address */
+#define	ENETDOWN	100	/* Network is down */
+#define	ENETUNREACH	101	/* Network is unreachable */
+#define	ENETRESET	102	/* Network dropped connection because of reset */
+#define	ECONNABORTED	103	/* Software caused connection abort */
+#define	ECONNRESET	104	/* Connection reset by peer */
+#define	ENOBUFS		105	/* No buffer space available */
+#define	EISCONN		106	/* Transport endpoint is already connected */
+#define	ENOTCONN	107	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	108	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	109	/* Too many references: cannot splice */
+#define	ETIMEDOUT	110	/* Connection timed out */
+#define	ECONNREFUSED	111	/* Connection refused */
+#define	EHOSTDOWN	112	/* Host is down */
+#define	EHOSTUNREACH	113	/* No route to host */
+#define	EALREADY	114	/* Operation already in progress */
+#define	EINPROGRESS	115	/* Operation now in progress */
+#define	ESTALE		116	/* Stale file handle */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EDQUOT		122	/* Quota exceeded */
+
+#define	ENOMEDIUM	123	/* No medium found */
+#define	EMEDIUMTYPE	124	/* Wrong medium type */
+#define	ECANCELED	125	/* Operation Canceled */
+#define	ENOKEY		126	/* Required key not available */
+#define	EKEYEXPIRED	127	/* Key has expired */
+#define	EKEYREVOKED	128	/* Key has been revoked */
+#define	EKEYREJECTED	129	/* Key was rejected by service */
+
+/* for robust mutexes */
+#define	EOWNERDEAD	130	/* Owner died */
+#define	ENOTRECOVERABLE	131	/* State not recoverable */
+
+#define ERFKILL		132	/* Operation not possible due to RF-kill */
+
+#define EHWPOISON	133	/* Memory page has hardware error */
+
+#endif
diff --git a/tools/include/uapi/asm-generic/fcntl.h b/tools/include/uapi/asm-generic/fcntl.h
new file mode 100644
index 000000000..ac190958c
--- /dev/null
+++ b/tools/include/uapi/asm-generic/fcntl.h
@@ -0,0 +1,220 @@
+#ifndef _ASM_GENERIC_FCNTL_H
+#define _ASM_GENERIC_FCNTL_H
+
+#include <linux/types.h>
+
+/*
+ * FMODE_EXEC is 0x20
+ * FMODE_NONOTIFY is 0x4000000
+ * These cannot be used by userspace O_* until internal and external open
+ * flags are split.
+ * -Eric Paris
+ */
+
+/*
+ * When introducing new O_* bits, please check its uniqueness in fcntl_init().
+ */
+
+#define O_ACCMODE	00000003
+#define O_RDONLY	00000000
+#define O_WRONLY	00000001
+#define O_RDWR		00000002
+#ifndef O_CREAT
+#define O_CREAT		00000100	/* not fcntl */
+#endif
+#ifndef O_EXCL
+#define O_EXCL		00000200	/* not fcntl */
+#endif
+#ifndef O_NOCTTY
+#define O_NOCTTY	00000400	/* not fcntl */
+#endif
+#ifndef O_TRUNC
+#define O_TRUNC		00001000	/* not fcntl */
+#endif
+#ifndef O_APPEND
+#define O_APPEND	00002000
+#endif
+#ifndef O_NONBLOCK
+#define O_NONBLOCK	00004000
+#endif
+#ifndef O_DSYNC
+#define O_DSYNC		00010000	/* used to be O_SYNC, see below */
+#endif
+#ifndef FASYNC
+#define FASYNC		00020000	/* fcntl, for BSD compatibility */
+#endif
+#ifndef O_DIRECT
+#define O_DIRECT	00040000	/* direct disk access hint */
+#endif
+#ifndef O_LARGEFILE
+#define O_LARGEFILE	00100000
+#endif
+#ifndef O_DIRECTORY
+#define O_DIRECTORY	00200000	/* must be a directory */
+#endif
+#ifndef O_NOFOLLOW
+#define O_NOFOLLOW	00400000	/* don't follow links */
+#endif
+#ifndef O_NOATIME
+#define O_NOATIME	01000000
+#endif
+#ifndef O_CLOEXEC
+#define O_CLOEXEC	02000000	/* set close_on_exec */
+#endif
+
+/*
+ * Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using
+ * the O_SYNC flag.  We continue to use the existing numerical value
+ * for O_DSYNC semantics now, but using the correct symbolic name for it.
+ * This new value is used to request true Posix O_SYNC semantics.  It is
+ * defined in this strange way to make sure applications compiled against
+ * new headers get at least O_DSYNC semantics on older kernels.
+ *
+ * This has the nice side-effect that we can simply test for O_DSYNC
+ * wherever we do not care if O_DSYNC or O_SYNC is used.
+ *
+ * Note: __O_SYNC must never be used directly.
+ */
+#ifndef O_SYNC
+#define __O_SYNC	04000000
+#define O_SYNC		(__O_SYNC|O_DSYNC)
+#endif
+
+#ifndef O_PATH
+#define O_PATH		010000000
+#endif
+
+#ifndef __O_TMPFILE
+#define __O_TMPFILE	020000000
+#endif
+
+/* a horrid kludge trying to make sure that this will fail on old kernels */
+#define O_TMPFILE (__O_TMPFILE | O_DIRECTORY)
+#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT)
+
+#ifndef O_NDELAY
+#define O_NDELAY	O_NONBLOCK
+#endif
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#ifndef F_GETLK
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+#endif
+#ifndef F_SETOWN
+#define F_SETOWN	8	/* for sockets. */
+#define F_GETOWN	9	/* for sockets. */
+#endif
+#ifndef F_SETSIG
+#define F_SETSIG	10	/* for sockets. */
+#define F_GETSIG	11	/* for sockets. */
+#endif
+
+#ifndef CONFIG_64BIT
+#ifndef F_GETLK64
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+#endif
+#endif
+
+#ifndef F_SETOWN_EX
+#define F_SETOWN_EX	15
+#define F_GETOWN_EX	16
+#endif
+
+#ifndef F_GETOWNER_UIDS
+#define F_GETOWNER_UIDS	17
+#endif
+
+/*
+ * Open File Description Locks
+ *
+ * Usually record locks held by a process are released on *any* close and are
+ * not inherited across a fork().
+ *
+ * These cmd values will set locks that conflict with process-associated
+ * record  locks, but are "owned" by the open file description, not the
+ * process. This means that they are inherited across fork() like BSD (flock)
+ * locks, and they are only released automatically when the last reference to
+ * the the open file against which they were acquired is put.
+ */
+#define F_OFD_GETLK	36
+#define F_OFD_SETLK	37
+#define F_OFD_SETLKW	38
+
+#define F_OWNER_TID	0
+#define F_OWNER_PID	1
+#define F_OWNER_PGRP	2
+
+struct f_owner_ex {
+	int	type;
+	__kernel_pid_t	pid;
+};
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#ifndef F_RDLCK
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+#endif
+
+/* for old implementation of bsd flock () */
+#ifndef F_EXLCK
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+#endif
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock ... */
+#define LOCK_READ	64	/* which allows concurrent read operations */
+#define LOCK_WRITE	128	/* which allows concurrent write operations */
+#define LOCK_RW		192	/* which allows concurrent read & write ops */
+
+#define F_LINUX_SPECIFIC_BASE	1024
+
+#ifndef HAVE_ARCH_STRUCT_FLOCK
+#ifndef __ARCH_FLOCK_PAD
+#define __ARCH_FLOCK_PAD
+#endif
+
+struct flock {
+	short	l_type;
+	short	l_whence;
+	__kernel_off_t	l_start;
+	__kernel_off_t	l_len;
+	__kernel_pid_t	l_pid;
+	__ARCH_FLOCK_PAD
+};
+#endif
+
+#ifndef HAVE_ARCH_STRUCT_FLOCK64
+#ifndef __ARCH_FLOCK64_PAD
+#define __ARCH_FLOCK64_PAD
+#endif
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	__kernel_loff_t l_start;
+	__kernel_loff_t l_len;
+	__kernel_pid_t  l_pid;
+	__ARCH_FLOCK64_PAD
+};
+#endif
+
+#endif /* _ASM_GENERIC_FCNTL_H */
diff --git a/tools/include/uapi/asm-generic/ioctls.h b/tools/include/uapi/asm-generic/ioctls.h
new file mode 100644
index 000000000..040651735
--- /dev/null
+++ b/tools/include/uapi/asm-generic/ioctls.h
@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_GENERIC_IOCTLS_H
+#define __ASM_GENERIC_IOCTLS_H
+
+#include <linux/ioctl.h>
+
+/*
+ * These are the most common definitions for tty ioctl numbers.
+ * Most of them do not use the recommended _IOC(), but there is
+ * probably some source code out there hardcoding the number,
+ * so we might as well use them for all new platforms.
+ *
+ * The architectures that use different values here typically
+ * try to be compatible with some Unix variants for the same
+ * architecture.
+ */
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 0x2A, struct termios2)
+#define TCSETS2		_IOW('T', 0x2B, struct termios2)
+#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
+#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
+#define TIOCGRS485	0x542E
+#ifndef TIOCSRS485
+#define TIOCSRS485	0x542F
+#endif
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */
+#define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
+#define TCSETX		0x5433
+#define TCSETXF		0x5434
+#define TCSETXW		0x5435
+#define TIOCSIG		_IOW('T', 0x36, int)  /* pty: generate signal */
+#define TIOCVHANGUP	0x5437
+#define TIOCGPKT	_IOR('T', 0x38, int) /* Get packet mode state */
+#define TIOCGPTLCK	_IOR('T', 0x39, int) /* Get Pty lock state */
+#define TIOCGEXCL	_IOR('T', 0x40, int) /* Get exclusive mode state */
+#define TIOCGPTPEER	_IO('T', 0x41) /* Safely open the slave */
+
+#define FIONCLEX	0x5450
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+/*
+ * Some arches already define FIOQSIZE due to a historical
+ * conflict with a Hayes modem-specific ioctl value.
+ */
+#ifndef FIOQSIZE
+# define FIOQSIZE	0x5460
+#endif
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
+
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
+
+#endif /* __ASM_GENERIC_IOCTLS_H */
diff --git a/tools/include/uapi/asm-generic/mman-common.h b/tools/include/uapi/asm-generic/mman-common.h
new file mode 100644
index 000000000..e7ee32861
--- /dev/null
+++ b/tools/include/uapi/asm-generic/mman-common.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_GENERIC_MMAN_COMMON_H
+#define __ASM_GENERIC_MMAN_COMMON_H
+
+/*
+ Author: Michael S. Tsirkin <mst@mellanox.co.il>, Mellanox Technologies Ltd.
+ Based on: asm-xxx/mman.h
+*/
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_SHARED_VALIDATE 0x03	/* share + validate extension flags */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+#ifdef CONFIG_MMAP_ALLOW_UNINITIALIZED
+# define MAP_UNINITIALIZED 0x4000000	/* For anonymous mmap, memory could be uninitialized */
+#else
+# define MAP_UNINITIALIZED 0x0		/* Don't support this flag */
+#endif
+
+/* 0x0100 - 0x80000 flags are defined in asm-generic/mman.h */
+#define MAP_FIXED_NOREPLACE	0x100000	/* MAP_FIXED which doesn't unmap underlying mapping */
+
+/*
+ * Flags for mlock
+ */
+#define MLOCK_ONFAULT	0x01		/* Lock pages in range after they are faulted in, do not prefault */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MADV_NORMAL	0		/* no further special treatment */
+#define MADV_RANDOM	1		/* expect random page references */
+#define MADV_SEQUENTIAL	2		/* expect sequential page references */
+#define MADV_WILLNEED	3		/* will need these pages */
+#define MADV_DONTNEED	4		/* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_FREE	8		/* free pages only if memory pressure */
+#define MADV_REMOVE	9		/* remove these pages & resources */
+#define MADV_DONTFORK	10		/* don't inherit across fork */
+#define MADV_DOFORK	11		/* do inherit across fork */
+#define MADV_HWPOISON	100		/* poison a page for testing */
+#define MADV_SOFT_OFFLINE 101		/* soft offline page for testing */
+
+#define MADV_MERGEABLE   12		/* KSM may merge identical pages */
+#define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
+
+#define MADV_HUGEPAGE	14		/* Worth backing with hugepages */
+#define MADV_NOHUGEPAGE	15		/* Not worth backing with hugepages */
+
+#define MADV_DONTDUMP   16		/* Explicity exclude from the core dump,
+					   overrides the coredump filter bits */
+#define MADV_DODUMP	17		/* Clear the MADV_DONTDUMP flag */
+
+#define MADV_WIPEONFORK 18		/* Zero memory on fork, child only */
+#define MADV_KEEPONFORK 19		/* Undo MADV_WIPEONFORK */
+
+/* compatibility flags */
+#define MAP_FILE	0
+
+#define PKEY_DISABLE_ACCESS	0x1
+#define PKEY_DISABLE_WRITE	0x2
+#define PKEY_ACCESS_MASK	(PKEY_DISABLE_ACCESS |\
+				 PKEY_DISABLE_WRITE)
+
+#endif /* __ASM_GENERIC_MMAN_COMMON_H */
diff --git a/tools/include/uapi/asm-generic/mman.h b/tools/include/uapi/asm-generic/mman.h
new file mode 100644
index 000000000..653687d97
--- /dev/null
+++ b/tools/include/uapi/asm-generic/mman.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_GENERIC_MMAN_H
+#define __ASM_GENERIC_MMAN_H
+
+#include <asm-generic/mman-common.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
+#define MAP_SYNC	0x80000		/* perform synchronous page faults for the mapping */
+
+/* Bits [26:31] are reserved, see mman-common.h for MAP_HUGETLB usage */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+#define MCL_ONFAULT	4		/* lock all pages that are faulted in */
+
+#endif /* __ASM_GENERIC_MMAN_H */
diff --git a/tools/include/uapi/asm-generic/unistd.h b/tools/include/uapi/asm-generic/unistd.h
new file mode 100644
index 000000000..df4bedb9b
--- /dev/null
+++ b/tools/include/uapi/asm-generic/unistd.h
@@ -0,0 +1,785 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#include <asm/bitsperlong.h>
+
+/*
+ * This file contains the system call numbers, based on the
+ * layout of the x86-64 architecture, which embeds the
+ * pointer to the syscall in the table.
+ *
+ * As a basic principle, no duplication of functionality
+ * should be added, e.g. we don't use lseek when llseek
+ * is present. New architectures should use this file
+ * and implement the less feature-full calls in user space.
+ */
+
+#ifndef __SYSCALL
+#define __SYSCALL(x, y)
+#endif
+
+#if __BITS_PER_LONG == 32 || defined(__SYSCALL_COMPAT)
+#define __SC_3264(_nr, _32, _64) __SYSCALL(_nr, _32)
+#else
+#define __SC_3264(_nr, _32, _64) __SYSCALL(_nr, _64)
+#endif
+
+#ifdef __SYSCALL_COMPAT
+#define __SC_COMP(_nr, _sys, _comp) __SYSCALL(_nr, _comp)
+#define __SC_COMP_3264(_nr, _32, _64, _comp) __SYSCALL(_nr, _comp)
+#else
+#define __SC_COMP(_nr, _sys, _comp) __SYSCALL(_nr, _sys)
+#define __SC_COMP_3264(_nr, _32, _64, _comp) __SC_3264(_nr, _32, _64)
+#endif
+
+#define __NR_io_setup 0
+__SC_COMP(__NR_io_setup, sys_io_setup, compat_sys_io_setup)
+#define __NR_io_destroy 1
+__SYSCALL(__NR_io_destroy, sys_io_destroy)
+#define __NR_io_submit 2
+__SC_COMP(__NR_io_submit, sys_io_submit, compat_sys_io_submit)
+#define __NR_io_cancel 3
+__SYSCALL(__NR_io_cancel, sys_io_cancel)
+#define __NR_io_getevents 4
+__SC_COMP(__NR_io_getevents, sys_io_getevents, compat_sys_io_getevents)
+
+/* fs/xattr.c */
+#define __NR_setxattr 5
+__SYSCALL(__NR_setxattr, sys_setxattr)
+#define __NR_lsetxattr 6
+__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
+#define __NR_fsetxattr 7
+__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
+#define __NR_getxattr 8
+__SYSCALL(__NR_getxattr, sys_getxattr)
+#define __NR_lgetxattr 9
+__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
+#define __NR_fgetxattr 10
+__SYSCALL(__NR_fgetxattr, sys_fgetxattr)
+#define __NR_listxattr 11
+__SYSCALL(__NR_listxattr, sys_listxattr)
+#define __NR_llistxattr 12
+__SYSCALL(__NR_llistxattr, sys_llistxattr)
+#define __NR_flistxattr 13
+__SYSCALL(__NR_flistxattr, sys_flistxattr)
+#define __NR_removexattr 14
+__SYSCALL(__NR_removexattr, sys_removexattr)
+#define __NR_lremovexattr 15
+__SYSCALL(__NR_lremovexattr, sys_lremovexattr)
+#define __NR_fremovexattr 16
+__SYSCALL(__NR_fremovexattr, sys_fremovexattr)
+
+/* fs/dcache.c */
+#define __NR_getcwd 17
+__SYSCALL(__NR_getcwd, sys_getcwd)
+
+/* fs/cookies.c */
+#define __NR_lookup_dcookie 18
+__SC_COMP(__NR_lookup_dcookie, sys_lookup_dcookie, compat_sys_lookup_dcookie)
+
+/* fs/eventfd.c */
+#define __NR_eventfd2 19
+__SYSCALL(__NR_eventfd2, sys_eventfd2)
+
+/* fs/eventpoll.c */
+#define __NR_epoll_create1 20
+__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
+#define __NR_epoll_ctl 21
+__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
+#define __NR_epoll_pwait 22
+__SC_COMP(__NR_epoll_pwait, sys_epoll_pwait, compat_sys_epoll_pwait)
+
+/* fs/fcntl.c */
+#define __NR_dup 23
+__SYSCALL(__NR_dup, sys_dup)
+#define __NR_dup3 24
+__SYSCALL(__NR_dup3, sys_dup3)
+#define __NR3264_fcntl 25
+__SC_COMP_3264(__NR3264_fcntl, sys_fcntl64, sys_fcntl, compat_sys_fcntl64)
+
+/* fs/inotify_user.c */
+#define __NR_inotify_init1 26
+__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
+#define __NR_inotify_add_watch 27
+__SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
+#define __NR_inotify_rm_watch 28
+__SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
+
+/* fs/ioctl.c */
+#define __NR_ioctl 29
+__SC_COMP(__NR_ioctl, sys_ioctl, compat_sys_ioctl)
+
+/* fs/ioprio.c */
+#define __NR_ioprio_set 30
+__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
+#define __NR_ioprio_get 31
+__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
+
+/* fs/locks.c */
+#define __NR_flock 32
+__SYSCALL(__NR_flock, sys_flock)
+
+/* fs/namei.c */
+#define __NR_mknodat 33
+__SYSCALL(__NR_mknodat, sys_mknodat)
+#define __NR_mkdirat 34
+__SYSCALL(__NR_mkdirat, sys_mkdirat)
+#define __NR_unlinkat 35
+__SYSCALL(__NR_unlinkat, sys_unlinkat)
+#define __NR_symlinkat 36
+__SYSCALL(__NR_symlinkat, sys_symlinkat)
+#define __NR_linkat 37
+__SYSCALL(__NR_linkat, sys_linkat)
+#ifdef __ARCH_WANT_RENAMEAT
+/* renameat is superseded with flags by renameat2 */
+#define __NR_renameat 38
+__SYSCALL(__NR_renameat, sys_renameat)
+#endif /* __ARCH_WANT_RENAMEAT */
+
+/* fs/namespace.c */
+#define __NR_umount2 39
+__SYSCALL(__NR_umount2, sys_umount)
+#define __NR_mount 40
+__SC_COMP(__NR_mount, sys_mount, compat_sys_mount)
+#define __NR_pivot_root 41
+__SYSCALL(__NR_pivot_root, sys_pivot_root)
+
+/* fs/nfsctl.c */
+#define __NR_nfsservctl 42
+__SYSCALL(__NR_nfsservctl, sys_ni_syscall)
+
+/* fs/open.c */
+#define __NR3264_statfs 43
+__SC_COMP_3264(__NR3264_statfs, sys_statfs64, sys_statfs, \
+	       compat_sys_statfs64)
+#define __NR3264_fstatfs 44
+__SC_COMP_3264(__NR3264_fstatfs, sys_fstatfs64, sys_fstatfs, \
+	       compat_sys_fstatfs64)
+#define __NR3264_truncate 45
+__SC_COMP_3264(__NR3264_truncate, sys_truncate64, sys_truncate, \
+	       compat_sys_truncate64)
+#define __NR3264_ftruncate 46
+__SC_COMP_3264(__NR3264_ftruncate, sys_ftruncate64, sys_ftruncate, \
+	       compat_sys_ftruncate64)
+
+#define __NR_fallocate 47
+__SC_COMP(__NR_fallocate, sys_fallocate, compat_sys_fallocate)
+#define __NR_faccessat 48
+__SYSCALL(__NR_faccessat, sys_faccessat)
+#define __NR_chdir 49
+__SYSCALL(__NR_chdir, sys_chdir)
+#define __NR_fchdir 50
+__SYSCALL(__NR_fchdir, sys_fchdir)
+#define __NR_chroot 51
+__SYSCALL(__NR_chroot, sys_chroot)
+#define __NR_fchmod 52
+__SYSCALL(__NR_fchmod, sys_fchmod)
+#define __NR_fchmodat 53
+__SYSCALL(__NR_fchmodat, sys_fchmodat)
+#define __NR_fchownat 54
+__SYSCALL(__NR_fchownat, sys_fchownat)
+#define __NR_fchown 55
+__SYSCALL(__NR_fchown, sys_fchown)
+#define __NR_openat 56
+__SC_COMP(__NR_openat, sys_openat, compat_sys_openat)
+#define __NR_close 57
+__SYSCALL(__NR_close, sys_close)
+#define __NR_vhangup 58
+__SYSCALL(__NR_vhangup, sys_vhangup)
+
+/* fs/pipe.c */
+#define __NR_pipe2 59
+__SYSCALL(__NR_pipe2, sys_pipe2)
+
+/* fs/quota.c */
+#define __NR_quotactl 60
+__SYSCALL(__NR_quotactl, sys_quotactl)
+
+/* fs/readdir.c */
+#define __NR_getdents64 61
+__SYSCALL(__NR_getdents64, sys_getdents64)
+
+/* fs/read_write.c */
+#define __NR3264_lseek 62
+__SC_3264(__NR3264_lseek, sys_llseek, sys_lseek)
+#define __NR_read 63
+__SYSCALL(__NR_read, sys_read)
+#define __NR_write 64
+__SYSCALL(__NR_write, sys_write)
+#define __NR_readv 65
+__SC_COMP(__NR_readv, sys_readv, compat_sys_readv)
+#define __NR_writev 66
+__SC_COMP(__NR_writev, sys_writev, compat_sys_writev)
+#define __NR_pread64 67
+__SC_COMP(__NR_pread64, sys_pread64, compat_sys_pread64)
+#define __NR_pwrite64 68
+__SC_COMP(__NR_pwrite64, sys_pwrite64, compat_sys_pwrite64)
+#define __NR_preadv 69
+__SC_COMP(__NR_preadv, sys_preadv, compat_sys_preadv)
+#define __NR_pwritev 70
+__SC_COMP(__NR_pwritev, sys_pwritev, compat_sys_pwritev)
+
+/* fs/sendfile.c */
+#define __NR3264_sendfile 71
+__SYSCALL(__NR3264_sendfile, sys_sendfile64)
+
+/* fs/select.c */
+#define __NR_pselect6 72
+__SC_COMP(__NR_pselect6, sys_pselect6, compat_sys_pselect6)
+#define __NR_ppoll 73
+__SC_COMP(__NR_ppoll, sys_ppoll, compat_sys_ppoll)
+
+/* fs/signalfd.c */
+#define __NR_signalfd4 74
+__SC_COMP(__NR_signalfd4, sys_signalfd4, compat_sys_signalfd4)
+
+/* fs/splice.c */
+#define __NR_vmsplice 75
+__SC_COMP(__NR_vmsplice, sys_vmsplice, compat_sys_vmsplice)
+#define __NR_splice 76
+__SYSCALL(__NR_splice, sys_splice)
+#define __NR_tee 77
+__SYSCALL(__NR_tee, sys_tee)
+
+/* fs/stat.c */
+#define __NR_readlinkat 78
+__SYSCALL(__NR_readlinkat, sys_readlinkat)
+#define __NR3264_fstatat 79
+__SC_3264(__NR3264_fstatat, sys_fstatat64, sys_newfstatat)
+#define __NR3264_fstat 80
+__SC_3264(__NR3264_fstat, sys_fstat64, sys_newfstat)
+
+/* fs/sync.c */
+#define __NR_sync 81
+__SYSCALL(__NR_sync, sys_sync)
+#define __NR_fsync 82
+__SYSCALL(__NR_fsync, sys_fsync)
+#define __NR_fdatasync 83
+__SYSCALL(__NR_fdatasync, sys_fdatasync)
+#ifdef __ARCH_WANT_SYNC_FILE_RANGE2
+#define __NR_sync_file_range2 84
+__SC_COMP(__NR_sync_file_range2, sys_sync_file_range2, \
+	  compat_sys_sync_file_range2)
+#else
+#define __NR_sync_file_range 84
+__SC_COMP(__NR_sync_file_range, sys_sync_file_range, \
+	  compat_sys_sync_file_range)
+#endif
+
+/* fs/timerfd.c */
+#define __NR_timerfd_create 85
+__SYSCALL(__NR_timerfd_create, sys_timerfd_create)
+#define __NR_timerfd_settime 86
+__SC_COMP(__NR_timerfd_settime, sys_timerfd_settime, \
+	  compat_sys_timerfd_settime)
+#define __NR_timerfd_gettime 87
+__SC_COMP(__NR_timerfd_gettime, sys_timerfd_gettime, \
+	  compat_sys_timerfd_gettime)
+
+/* fs/utimes.c */
+#define __NR_utimensat 88
+__SC_COMP(__NR_utimensat, sys_utimensat, compat_sys_utimensat)
+
+/* kernel/acct.c */
+#define __NR_acct 89
+__SYSCALL(__NR_acct, sys_acct)
+
+/* kernel/capability.c */
+#define __NR_capget 90
+__SYSCALL(__NR_capget, sys_capget)
+#define __NR_capset 91
+__SYSCALL(__NR_capset, sys_capset)
+
+/* kernel/exec_domain.c */
+#define __NR_personality 92
+__SYSCALL(__NR_personality, sys_personality)
+
+/* kernel/exit.c */
+#define __NR_exit 93
+__SYSCALL(__NR_exit, sys_exit)
+#define __NR_exit_group 94
+__SYSCALL(__NR_exit_group, sys_exit_group)
+#define __NR_waitid 95
+__SC_COMP(__NR_waitid, sys_waitid, compat_sys_waitid)
+
+/* kernel/fork.c */
+#define __NR_set_tid_address 96
+__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
+#define __NR_unshare 97
+__SYSCALL(__NR_unshare, sys_unshare)
+
+/* kernel/futex.c */
+#define __NR_futex 98
+__SC_COMP(__NR_futex, sys_futex, compat_sys_futex)
+#define __NR_set_robust_list 99
+__SC_COMP(__NR_set_robust_list, sys_set_robust_list, \
+	  compat_sys_set_robust_list)
+#define __NR_get_robust_list 100
+__SC_COMP(__NR_get_robust_list, sys_get_robust_list, \
+	  compat_sys_get_robust_list)
+
+/* kernel/hrtimer.c */
+#define __NR_nanosleep 101
+__SC_COMP(__NR_nanosleep, sys_nanosleep, compat_sys_nanosleep)
+
+/* kernel/itimer.c */
+#define __NR_getitimer 102
+__SC_COMP(__NR_getitimer, sys_getitimer, compat_sys_getitimer)
+#define __NR_setitimer 103
+__SC_COMP(__NR_setitimer, sys_setitimer, compat_sys_setitimer)
+
+/* kernel/kexec.c */
+#define __NR_kexec_load 104
+__SC_COMP(__NR_kexec_load, sys_kexec_load, compat_sys_kexec_load)
+
+/* kernel/module.c */
+#define __NR_init_module 105
+__SYSCALL(__NR_init_module, sys_init_module)
+#define __NR_delete_module 106
+__SYSCALL(__NR_delete_module, sys_delete_module)
+
+/* kernel/posix-timers.c */
+#define __NR_timer_create 107
+__SC_COMP(__NR_timer_create, sys_timer_create, compat_sys_timer_create)
+#define __NR_timer_gettime 108
+__SC_COMP(__NR_timer_gettime, sys_timer_gettime, compat_sys_timer_gettime)
+#define __NR_timer_getoverrun 109
+__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
+#define __NR_timer_settime 110
+__SC_COMP(__NR_timer_settime, sys_timer_settime, compat_sys_timer_settime)
+#define __NR_timer_delete 111
+__SYSCALL(__NR_timer_delete, sys_timer_delete)
+#define __NR_clock_settime 112
+__SC_COMP(__NR_clock_settime, sys_clock_settime, compat_sys_clock_settime)
+#define __NR_clock_gettime 113
+__SC_COMP(__NR_clock_gettime, sys_clock_gettime, compat_sys_clock_gettime)
+#define __NR_clock_getres 114
+__SC_COMP(__NR_clock_getres, sys_clock_getres, compat_sys_clock_getres)
+#define __NR_clock_nanosleep 115
+__SC_COMP(__NR_clock_nanosleep, sys_clock_nanosleep, \
+	  compat_sys_clock_nanosleep)
+
+/* kernel/printk.c */
+#define __NR_syslog 116
+__SYSCALL(__NR_syslog, sys_syslog)
+
+/* kernel/ptrace.c */
+#define __NR_ptrace 117
+__SYSCALL(__NR_ptrace, sys_ptrace)
+
+/* kernel/sched/core.c */
+#define __NR_sched_setparam 118
+__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
+#define __NR_sched_setscheduler 119
+__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
+#define __NR_sched_getscheduler 120
+__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
+#define __NR_sched_getparam 121
+__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
+#define __NR_sched_setaffinity 122
+__SC_COMP(__NR_sched_setaffinity, sys_sched_setaffinity, \
+	  compat_sys_sched_setaffinity)
+#define __NR_sched_getaffinity 123
+__SC_COMP(__NR_sched_getaffinity, sys_sched_getaffinity, \
+	  compat_sys_sched_getaffinity)
+#define __NR_sched_yield 124
+__SYSCALL(__NR_sched_yield, sys_sched_yield)
+#define __NR_sched_get_priority_max 125
+__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
+#define __NR_sched_get_priority_min 126
+__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
+#define __NR_sched_rr_get_interval 127
+__SC_COMP(__NR_sched_rr_get_interval, sys_sched_rr_get_interval, \
+	  compat_sys_sched_rr_get_interval)
+
+/* kernel/signal.c */
+#define __NR_restart_syscall 128
+__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
+#define __NR_kill 129
+__SYSCALL(__NR_kill, sys_kill)
+#define __NR_tkill 130
+__SYSCALL(__NR_tkill, sys_tkill)
+#define __NR_tgkill 131
+__SYSCALL(__NR_tgkill, sys_tgkill)
+#define __NR_sigaltstack 132
+__SC_COMP(__NR_sigaltstack, sys_sigaltstack, compat_sys_sigaltstack)
+#define __NR_rt_sigsuspend 133
+__SC_COMP(__NR_rt_sigsuspend, sys_rt_sigsuspend, compat_sys_rt_sigsuspend)
+#define __NR_rt_sigaction 134
+__SC_COMP(__NR_rt_sigaction, sys_rt_sigaction, compat_sys_rt_sigaction)
+#define __NR_rt_sigprocmask 135
+__SC_COMP(__NR_rt_sigprocmask, sys_rt_sigprocmask, compat_sys_rt_sigprocmask)
+#define __NR_rt_sigpending 136
+__SC_COMP(__NR_rt_sigpending, sys_rt_sigpending, compat_sys_rt_sigpending)
+#define __NR_rt_sigtimedwait 137
+__SC_COMP(__NR_rt_sigtimedwait, sys_rt_sigtimedwait, \
+	  compat_sys_rt_sigtimedwait)
+#define __NR_rt_sigqueueinfo 138
+__SC_COMP(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo, \
+	  compat_sys_rt_sigqueueinfo)
+#define __NR_rt_sigreturn 139
+__SC_COMP(__NR_rt_sigreturn, sys_rt_sigreturn, compat_sys_rt_sigreturn)
+
+/* kernel/sys.c */
+#define __NR_setpriority 140
+__SYSCALL(__NR_setpriority, sys_setpriority)
+#define __NR_getpriority 141
+__SYSCALL(__NR_getpriority, sys_getpriority)
+#define __NR_reboot 142
+__SYSCALL(__NR_reboot, sys_reboot)
+#define __NR_setregid 143
+__SYSCALL(__NR_setregid, sys_setregid)
+#define __NR_setgid 144
+__SYSCALL(__NR_setgid, sys_setgid)
+#define __NR_setreuid 145
+__SYSCALL(__NR_setreuid, sys_setreuid)
+#define __NR_setuid 146
+__SYSCALL(__NR_setuid, sys_setuid)
+#define __NR_setresuid 147
+__SYSCALL(__NR_setresuid, sys_setresuid)
+#define __NR_getresuid 148
+__SYSCALL(__NR_getresuid, sys_getresuid)
+#define __NR_setresgid 149
+__SYSCALL(__NR_setresgid, sys_setresgid)
+#define __NR_getresgid 150
+__SYSCALL(__NR_getresgid, sys_getresgid)
+#define __NR_setfsuid 151
+__SYSCALL(__NR_setfsuid, sys_setfsuid)
+#define __NR_setfsgid 152
+__SYSCALL(__NR_setfsgid, sys_setfsgid)
+#define __NR_times 153
+__SC_COMP(__NR_times, sys_times, compat_sys_times)
+#define __NR_setpgid 154
+__SYSCALL(__NR_setpgid, sys_setpgid)
+#define __NR_getpgid 155
+__SYSCALL(__NR_getpgid, sys_getpgid)
+#define __NR_getsid 156
+__SYSCALL(__NR_getsid, sys_getsid)
+#define __NR_setsid 157
+__SYSCALL(__NR_setsid, sys_setsid)
+#define __NR_getgroups 158
+__SYSCALL(__NR_getgroups, sys_getgroups)
+#define __NR_setgroups 159
+__SYSCALL(__NR_setgroups, sys_setgroups)
+#define __NR_uname 160
+__SYSCALL(__NR_uname, sys_newuname)
+#define __NR_sethostname 161
+__SYSCALL(__NR_sethostname, sys_sethostname)
+#define __NR_setdomainname 162
+__SYSCALL(__NR_setdomainname, sys_setdomainname)
+#define __NR_getrlimit 163
+__SC_COMP(__NR_getrlimit, sys_getrlimit, compat_sys_getrlimit)
+#define __NR_setrlimit 164
+__SC_COMP(__NR_setrlimit, sys_setrlimit, compat_sys_setrlimit)
+#define __NR_getrusage 165
+__SC_COMP(__NR_getrusage, sys_getrusage, compat_sys_getrusage)
+#define __NR_umask 166
+__SYSCALL(__NR_umask, sys_umask)
+#define __NR_prctl 167
+__SYSCALL(__NR_prctl, sys_prctl)
+#define __NR_getcpu 168
+__SYSCALL(__NR_getcpu, sys_getcpu)
+
+/* kernel/time.c */
+#define __NR_gettimeofday 169
+__SC_COMP(__NR_gettimeofday, sys_gettimeofday, compat_sys_gettimeofday)
+#define __NR_settimeofday 170
+__SC_COMP(__NR_settimeofday, sys_settimeofday, compat_sys_settimeofday)
+#define __NR_adjtimex 171
+__SC_COMP(__NR_adjtimex, sys_adjtimex, compat_sys_adjtimex)
+
+/* kernel/timer.c */
+#define __NR_getpid 172
+__SYSCALL(__NR_getpid, sys_getpid)
+#define __NR_getppid 173
+__SYSCALL(__NR_getppid, sys_getppid)
+#define __NR_getuid 174
+__SYSCALL(__NR_getuid, sys_getuid)
+#define __NR_geteuid 175
+__SYSCALL(__NR_geteuid, sys_geteuid)
+#define __NR_getgid 176
+__SYSCALL(__NR_getgid, sys_getgid)
+#define __NR_getegid 177
+__SYSCALL(__NR_getegid, sys_getegid)
+#define __NR_gettid 178
+__SYSCALL(__NR_gettid, sys_gettid)
+#define __NR_sysinfo 179
+__SC_COMP(__NR_sysinfo, sys_sysinfo, compat_sys_sysinfo)
+
+/* ipc/mqueue.c */
+#define __NR_mq_open 180
+__SC_COMP(__NR_mq_open, sys_mq_open, compat_sys_mq_open)
+#define __NR_mq_unlink 181
+__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
+#define __NR_mq_timedsend 182
+__SC_COMP(__NR_mq_timedsend, sys_mq_timedsend, compat_sys_mq_timedsend)
+#define __NR_mq_timedreceive 183
+__SC_COMP(__NR_mq_timedreceive, sys_mq_timedreceive, \
+	  compat_sys_mq_timedreceive)
+#define __NR_mq_notify 184
+__SC_COMP(__NR_mq_notify, sys_mq_notify, compat_sys_mq_notify)
+#define __NR_mq_getsetattr 185
+__SC_COMP(__NR_mq_getsetattr, sys_mq_getsetattr, compat_sys_mq_getsetattr)
+
+/* ipc/msg.c */
+#define __NR_msgget 186
+__SYSCALL(__NR_msgget, sys_msgget)
+#define __NR_msgctl 187
+__SC_COMP(__NR_msgctl, sys_msgctl, compat_sys_msgctl)
+#define __NR_msgrcv 188
+__SC_COMP(__NR_msgrcv, sys_msgrcv, compat_sys_msgrcv)
+#define __NR_msgsnd 189
+__SC_COMP(__NR_msgsnd, sys_msgsnd, compat_sys_msgsnd)
+
+/* ipc/sem.c */
+#define __NR_semget 190
+__SYSCALL(__NR_semget, sys_semget)
+#define __NR_semctl 191
+__SC_COMP(__NR_semctl, sys_semctl, compat_sys_semctl)
+#define __NR_semtimedop 192
+__SC_COMP(__NR_semtimedop, sys_semtimedop, compat_sys_semtimedop)
+#define __NR_semop 193
+__SYSCALL(__NR_semop, sys_semop)
+
+/* ipc/shm.c */
+#define __NR_shmget 194
+__SYSCALL(__NR_shmget, sys_shmget)
+#define __NR_shmctl 195
+__SC_COMP(__NR_shmctl, sys_shmctl, compat_sys_shmctl)
+#define __NR_shmat 196
+__SC_COMP(__NR_shmat, sys_shmat, compat_sys_shmat)
+#define __NR_shmdt 197
+__SYSCALL(__NR_shmdt, sys_shmdt)
+
+/* net/socket.c */
+#define __NR_socket 198
+__SYSCALL(__NR_socket, sys_socket)
+#define __NR_socketpair 199
+__SYSCALL(__NR_socketpair, sys_socketpair)
+#define __NR_bind 200
+__SYSCALL(__NR_bind, sys_bind)
+#define __NR_listen 201
+__SYSCALL(__NR_listen, sys_listen)
+#define __NR_accept 202
+__SYSCALL(__NR_accept, sys_accept)
+#define __NR_connect 203
+__SYSCALL(__NR_connect, sys_connect)
+#define __NR_getsockname 204
+__SYSCALL(__NR_getsockname, sys_getsockname)
+#define __NR_getpeername 205
+__SYSCALL(__NR_getpeername, sys_getpeername)
+#define __NR_sendto 206
+__SYSCALL(__NR_sendto, sys_sendto)
+#define __NR_recvfrom 207
+__SC_COMP(__NR_recvfrom, sys_recvfrom, compat_sys_recvfrom)
+#define __NR_setsockopt 208
+__SC_COMP(__NR_setsockopt, sys_setsockopt, compat_sys_setsockopt)
+#define __NR_getsockopt 209
+__SC_COMP(__NR_getsockopt, sys_getsockopt, compat_sys_getsockopt)
+#define __NR_shutdown 210
+__SYSCALL(__NR_shutdown, sys_shutdown)
+#define __NR_sendmsg 211
+__SC_COMP(__NR_sendmsg, sys_sendmsg, compat_sys_sendmsg)
+#define __NR_recvmsg 212
+__SC_COMP(__NR_recvmsg, sys_recvmsg, compat_sys_recvmsg)
+
+/* mm/filemap.c */
+#define __NR_readahead 213
+__SC_COMP(__NR_readahead, sys_readahead, compat_sys_readahead)
+
+/* mm/nommu.c, also with MMU */
+#define __NR_brk 214
+__SYSCALL(__NR_brk, sys_brk)
+#define __NR_munmap 215
+__SYSCALL(__NR_munmap, sys_munmap)
+#define __NR_mremap 216
+__SYSCALL(__NR_mremap, sys_mremap)
+
+/* security/keys/keyctl.c */
+#define __NR_add_key 217
+__SYSCALL(__NR_add_key, sys_add_key)
+#define __NR_request_key 218
+__SYSCALL(__NR_request_key, sys_request_key)
+#define __NR_keyctl 219
+__SC_COMP(__NR_keyctl, sys_keyctl, compat_sys_keyctl)
+
+/* arch/example/kernel/sys_example.c */
+#define __NR_clone 220
+__SYSCALL(__NR_clone, sys_clone)
+#define __NR_execve 221
+__SC_COMP(__NR_execve, sys_execve, compat_sys_execve)
+
+#define __NR3264_mmap 222
+__SC_3264(__NR3264_mmap, sys_mmap2, sys_mmap)
+/* mm/fadvise.c */
+#define __NR3264_fadvise64 223
+__SC_COMP(__NR3264_fadvise64, sys_fadvise64_64, compat_sys_fadvise64_64)
+
+/* mm/, CONFIG_MMU only */
+#ifndef __ARCH_NOMMU
+#define __NR_swapon 224
+__SYSCALL(__NR_swapon, sys_swapon)
+#define __NR_swapoff 225
+__SYSCALL(__NR_swapoff, sys_swapoff)
+#define __NR_mprotect 226
+__SYSCALL(__NR_mprotect, sys_mprotect)
+#define __NR_msync 227
+__SYSCALL(__NR_msync, sys_msync)
+#define __NR_mlock 228
+__SYSCALL(__NR_mlock, sys_mlock)
+#define __NR_munlock 229
+__SYSCALL(__NR_munlock, sys_munlock)
+#define __NR_mlockall 230
+__SYSCALL(__NR_mlockall, sys_mlockall)
+#define __NR_munlockall 231
+__SYSCALL(__NR_munlockall, sys_munlockall)
+#define __NR_mincore 232
+__SYSCALL(__NR_mincore, sys_mincore)
+#define __NR_madvise 233
+__SYSCALL(__NR_madvise, sys_madvise)
+#define __NR_remap_file_pages 234
+__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
+#define __NR_mbind 235
+__SC_COMP(__NR_mbind, sys_mbind, compat_sys_mbind)
+#define __NR_get_mempolicy 236
+__SC_COMP(__NR_get_mempolicy, sys_get_mempolicy, compat_sys_get_mempolicy)
+#define __NR_set_mempolicy 237
+__SC_COMP(__NR_set_mempolicy, sys_set_mempolicy, compat_sys_set_mempolicy)
+#define __NR_migrate_pages 238
+__SC_COMP(__NR_migrate_pages, sys_migrate_pages, compat_sys_migrate_pages)
+#define __NR_move_pages 239
+__SC_COMP(__NR_move_pages, sys_move_pages, compat_sys_move_pages)
+#endif
+
+#define __NR_rt_tgsigqueueinfo 240
+__SC_COMP(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo, \
+	  compat_sys_rt_tgsigqueueinfo)
+#define __NR_perf_event_open 241
+__SYSCALL(__NR_perf_event_open, sys_perf_event_open)
+#define __NR_accept4 242
+__SYSCALL(__NR_accept4, sys_accept4)
+#define __NR_recvmmsg 243
+__SC_COMP(__NR_recvmmsg, sys_recvmmsg, compat_sys_recvmmsg)
+
+/*
+ * Architectures may provide up to 16 syscalls of their own
+ * starting with this value.
+ */
+#define __NR_arch_specific_syscall 244
+
+#define __NR_wait4 260
+__SC_COMP(__NR_wait4, sys_wait4, compat_sys_wait4)
+#define __NR_prlimit64 261
+__SYSCALL(__NR_prlimit64, sys_prlimit64)
+#define __NR_fanotify_init 262
+__SYSCALL(__NR_fanotify_init, sys_fanotify_init)
+#define __NR_fanotify_mark 263
+__SYSCALL(__NR_fanotify_mark, sys_fanotify_mark)
+#define __NR_name_to_handle_at         264
+__SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at)
+#define __NR_open_by_handle_at         265
+__SC_COMP(__NR_open_by_handle_at, sys_open_by_handle_at, \
+	  compat_sys_open_by_handle_at)
+#define __NR_clock_adjtime 266
+__SC_COMP(__NR_clock_adjtime, sys_clock_adjtime, compat_sys_clock_adjtime)
+#define __NR_syncfs 267
+__SYSCALL(__NR_syncfs, sys_syncfs)
+#define __NR_setns 268
+__SYSCALL(__NR_setns, sys_setns)
+#define __NR_sendmmsg 269
+__SC_COMP(__NR_sendmmsg, sys_sendmmsg, compat_sys_sendmmsg)
+#define __NR_process_vm_readv 270
+__SC_COMP(__NR_process_vm_readv, sys_process_vm_readv, \
+          compat_sys_process_vm_readv)
+#define __NR_process_vm_writev 271
+__SC_COMP(__NR_process_vm_writev, sys_process_vm_writev, \
+          compat_sys_process_vm_writev)
+#define __NR_kcmp 272
+__SYSCALL(__NR_kcmp, sys_kcmp)
+#define __NR_finit_module 273
+__SYSCALL(__NR_finit_module, sys_finit_module)
+#define __NR_sched_setattr 274
+__SYSCALL(__NR_sched_setattr, sys_sched_setattr)
+#define __NR_sched_getattr 275
+__SYSCALL(__NR_sched_getattr, sys_sched_getattr)
+#define __NR_renameat2 276
+__SYSCALL(__NR_renameat2, sys_renameat2)
+#define __NR_seccomp 277
+__SYSCALL(__NR_seccomp, sys_seccomp)
+#define __NR_getrandom 278
+__SYSCALL(__NR_getrandom, sys_getrandom)
+#define __NR_memfd_create 279
+__SYSCALL(__NR_memfd_create, sys_memfd_create)
+#define __NR_bpf 280
+__SYSCALL(__NR_bpf, sys_bpf)
+#define __NR_execveat 281
+__SC_COMP(__NR_execveat, sys_execveat, compat_sys_execveat)
+#define __NR_userfaultfd 282
+__SYSCALL(__NR_userfaultfd, sys_userfaultfd)
+#define __NR_membarrier 283
+__SYSCALL(__NR_membarrier, sys_membarrier)
+#define __NR_mlock2 284
+__SYSCALL(__NR_mlock2, sys_mlock2)
+#define __NR_copy_file_range 285
+__SYSCALL(__NR_copy_file_range, sys_copy_file_range)
+#define __NR_preadv2 286
+__SC_COMP(__NR_preadv2, sys_preadv2, compat_sys_preadv2)
+#define __NR_pwritev2 287
+__SC_COMP(__NR_pwritev2, sys_pwritev2, compat_sys_pwritev2)
+#define __NR_pkey_mprotect 288
+__SYSCALL(__NR_pkey_mprotect, sys_pkey_mprotect)
+#define __NR_pkey_alloc 289
+__SYSCALL(__NR_pkey_alloc,    sys_pkey_alloc)
+#define __NR_pkey_free 290
+__SYSCALL(__NR_pkey_free,     sys_pkey_free)
+#define __NR_statx 291
+__SYSCALL(__NR_statx,     sys_statx)
+#define __NR_io_pgetevents 292
+__SC_COMP(__NR_io_pgetevents, sys_io_pgetevents, compat_sys_io_pgetevents)
+#define __NR_rseq 293
+__SYSCALL(__NR_rseq, sys_rseq)
+
+#undef __NR_syscalls
+#define __NR_syscalls 294
+
+/*
+ * 32 bit systems traditionally used different
+ * syscalls for off_t and loff_t arguments, while
+ * 64 bit systems only need the off_t version.
+ * For new 32 bit platforms, there is no need to
+ * implement the old 32 bit off_t syscalls, so
+ * they take different names.
+ * Here we map the numbers so that both versions
+ * use the same syscall table layout.
+ */
+#if __BITS_PER_LONG == 64 && !defined(__SYSCALL_COMPAT)
+#define __NR_fcntl __NR3264_fcntl
+#define __NR_statfs __NR3264_statfs
+#define __NR_fstatfs __NR3264_fstatfs
+#define __NR_truncate __NR3264_truncate
+#define __NR_ftruncate __NR3264_ftruncate
+#define __NR_lseek __NR3264_lseek
+#define __NR_sendfile __NR3264_sendfile
+#define __NR_newfstatat __NR3264_fstatat
+#define __NR_fstat __NR3264_fstat
+#define __NR_mmap __NR3264_mmap
+#define __NR_fadvise64 __NR3264_fadvise64
+#ifdef __NR3264_stat
+#define __NR_stat __NR3264_stat
+#define __NR_lstat __NR3264_lstat
+#endif
+#else
+#define __NR_fcntl64 __NR3264_fcntl
+#define __NR_statfs64 __NR3264_statfs
+#define __NR_fstatfs64 __NR3264_fstatfs
+#define __NR_truncate64 __NR3264_truncate
+#define __NR_ftruncate64 __NR3264_ftruncate
+#define __NR_llseek __NR3264_lseek
+#define __NR_sendfile64 __NR3264_sendfile
+#define __NR_fstatat64 __NR3264_fstatat
+#define __NR_fstat64 __NR3264_fstat
+#define __NR_mmap2 __NR3264_mmap
+#define __NR_fadvise64_64 __NR3264_fadvise64
+#ifdef __NR3264_stat
+#define __NR_stat64 __NR3264_stat
+#define __NR_lstat64 __NR3264_lstat
+#endif
+#endif
diff --git a/tools/include/uapi/asm/bitsperlong.h b/tools/include/uapi/asm/bitsperlong.h
new file mode 100644
index 000000000..edba4d93e
--- /dev/null
+++ b/tools/include/uapi/asm/bitsperlong.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if defined(__i386__) || defined(__x86_64__)
+#include "../../../arch/x86/include/uapi/asm/bitsperlong.h"
+#elif defined(__aarch64__)
+#include "../../../arch/arm64/include/uapi/asm/bitsperlong.h"
+#elif defined(__powerpc__)
+#include "../../../arch/powerpc/include/uapi/asm/bitsperlong.h"
+#elif defined(__s390__)
+#include "../../../arch/s390/include/uapi/asm/bitsperlong.h"
+#elif defined(__sparc__)
+#include "../../../arch/sparc/include/uapi/asm/bitsperlong.h"
+#elif defined(__mips__)
+#include "../../../arch/mips/include/uapi/asm/bitsperlong.h"
+#elif defined(__ia64__)
+#include "../../../arch/ia64/include/uapi/asm/bitsperlong.h"
+#elif defined(__riscv)
+#include "../../../arch/riscv/include/uapi/asm/bitsperlong.h"
+#elif defined(__alpha__)
+#include "../../../arch/alpha/include/uapi/asm/bitsperlong.h"
+#else
+#include <asm-generic/bitsperlong.h>
+#endif
diff --git a/tools/include/uapi/asm/bpf_perf_event.h b/tools/include/uapi/asm/bpf_perf_event.h
new file mode 100644
index 000000000..13a58531e
--- /dev/null
+++ b/tools/include/uapi/asm/bpf_perf_event.h
@@ -0,0 +1,7 @@
+#if defined(__aarch64__)
+#include "../../arch/arm64/include/uapi/asm/bpf_perf_event.h"
+#elif defined(__s390__)
+#include "../../arch/s390/include/uapi/asm/bpf_perf_event.h"
+#else
+#include <uapi/asm-generic/bpf_perf_event.h>
+#endif
diff --git a/tools/include/uapi/asm/errno.h b/tools/include/uapi/asm/errno.h
new file mode 100644
index 000000000..ce3c5945a
--- /dev/null
+++ b/tools/include/uapi/asm/errno.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if defined(__i386__) || defined(__x86_64__)
+#include "../../arch/x86/include/uapi/asm/errno.h"
+#elif defined(__powerpc__)
+#include "../../arch/powerpc/include/uapi/asm/errno.h"
+#elif defined(__sparc__)
+#include "../../arch/sparc/include/uapi/asm/errno.h"
+#elif defined(__alpha__)
+#include "../../arch/alpha/include/uapi/asm/errno.h"
+#elif defined(__mips__)
+#include "../../arch/mips/include/uapi/asm/errno.h"
+#elif defined(__ia64__)
+#include "../../arch/ia64/include/uapi/asm/errno.h"
+#elif defined(__xtensa__)
+#include "../../arch/xtensa/include/uapi/asm/errno.h"
+#else
+#include <asm-generic/errno.h>
+#endif
diff --git a/tools/include/uapi/drm/drm.h b/tools/include/uapi/drm/drm.h
new file mode 100644
index 000000000..300f33663
--- /dev/null
+++ b/tools/include/uapi/drm/drm.h
@@ -0,0 +1,1012 @@
+/**
+ * \file drm.h
+ * Header for the Direct Rendering Manager
+ *
+ * \author Rickard E. (Rik) Faith <faith@valinux.com>
+ *
+ * \par Acknowledgments:
+ * Dec 1999, Richard Henderson <rth@twiddle.net>, move to generic \c cmpxchg.
+ */
+
+/*
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_H_
+#define _DRM_H_
+
+#if defined(__KERNEL__)
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+typedef unsigned int drm_handle_t;
+
+#elif defined(__linux__)
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+typedef unsigned int drm_handle_t;
+
+#else /* One of the BSDs */
+
+#include <sys/ioccom.h>
+#include <sys/types.h>
+typedef int8_t   __s8;
+typedef uint8_t  __u8;
+typedef int16_t  __s16;
+typedef uint16_t __u16;
+typedef int32_t  __s32;
+typedef uint32_t __u32;
+typedef int64_t  __s64;
+typedef uint64_t __u64;
+typedef size_t   __kernel_size_t;
+typedef unsigned long drm_handle_t;
+
+#endif
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_NAME	"drm"	  /**< Name in kernel, /dev, and /proc */
+#define DRM_MIN_ORDER	5	  /**< At least 2^5 bytes = 32 bytes */
+#define DRM_MAX_ORDER	22	  /**< Up to 2^22 bytes = 4MB */
+#define DRM_RAM_PERCENT 10	  /**< How much system ram can we lock? */
+
+#define _DRM_LOCK_HELD	0x80000000U /**< Hardware lock is held */
+#define _DRM_LOCK_CONT	0x40000000U /**< Hardware lock is contended */
+#define _DRM_LOCK_IS_HELD(lock)	   ((lock) & _DRM_LOCK_HELD)
+#define _DRM_LOCK_IS_CONT(lock)	   ((lock) & _DRM_LOCK_CONT)
+#define _DRM_LOCKING_CONTEXT(lock) ((lock) & ~(_DRM_LOCK_HELD|_DRM_LOCK_CONT))
+
+typedef unsigned int drm_context_t;
+typedef unsigned int drm_drawable_t;
+typedef unsigned int drm_magic_t;
+
+/**
+ * Cliprect.
+ *
+ * \warning: If you change this structure, make sure you change
+ * XF86DRIClipRectRec in the server as well
+ *
+ * \note KW: Actually it's illegal to change either for
+ * backwards-compatibility reasons.
+ */
+struct drm_clip_rect {
+	unsigned short x1;
+	unsigned short y1;
+	unsigned short x2;
+	unsigned short y2;
+};
+
+/**
+ * Drawable information.
+ */
+struct drm_drawable_info {
+	unsigned int num_rects;
+	struct drm_clip_rect *rects;
+};
+
+/**
+ * Texture region,
+ */
+struct drm_tex_region {
+	unsigned char next;
+	unsigned char prev;
+	unsigned char in_use;
+	unsigned char padding;
+	unsigned int age;
+};
+
+/**
+ * Hardware lock.
+ *
+ * The lock structure is a simple cache-line aligned integer.  To avoid
+ * processor bus contention on a multiprocessor system, there should not be any
+ * other data stored in the same cache line.
+ */
+struct drm_hw_lock {
+	__volatile__ unsigned int lock;		/**< lock variable */
+	char padding[60];			/**< Pad to cache line */
+};
+
+/**
+ * DRM_IOCTL_VERSION ioctl argument type.
+ *
+ * \sa drmGetVersion().
+ */
+struct drm_version {
+	int version_major;	  /**< Major version */
+	int version_minor;	  /**< Minor version */
+	int version_patchlevel;	  /**< Patch level */
+	__kernel_size_t name_len;	  /**< Length of name buffer */
+	char __user *name;	  /**< Name of driver */
+	__kernel_size_t date_len;	  /**< Length of date buffer */
+	char __user *date;	  /**< User-space buffer to hold date */
+	__kernel_size_t desc_len;	  /**< Length of desc buffer */
+	char __user *desc;	  /**< User-space buffer to hold desc */
+};
+
+/**
+ * DRM_IOCTL_GET_UNIQUE ioctl argument type.
+ *
+ * \sa drmGetBusid() and drmSetBusId().
+ */
+struct drm_unique {
+	__kernel_size_t unique_len;	  /**< Length of unique */
+	char __user *unique;	  /**< Unique name for driver instantiation */
+};
+
+struct drm_list {
+	int count;		  /**< Length of user-space structures */
+	struct drm_version __user *version;
+};
+
+struct drm_block {
+	int unused;
+};
+
+/**
+ * DRM_IOCTL_CONTROL ioctl argument type.
+ *
+ * \sa drmCtlInstHandler() and drmCtlUninstHandler().
+ */
+struct drm_control {
+	enum {
+		DRM_ADD_COMMAND,
+		DRM_RM_COMMAND,
+		DRM_INST_HANDLER,
+		DRM_UNINST_HANDLER
+	} func;
+	int irq;
+};
+
+/**
+ * Type of memory to map.
+ */
+enum drm_map_type {
+	_DRM_FRAME_BUFFER = 0,	  /**< WC (no caching), no core dump */
+	_DRM_REGISTERS = 1,	  /**< no caching, no core dump */
+	_DRM_SHM = 2,		  /**< shared, cached */
+	_DRM_AGP = 3,		  /**< AGP/GART */
+	_DRM_SCATTER_GATHER = 4,  /**< Scatter/gather memory for PCI DMA */
+	_DRM_CONSISTENT = 5	  /**< Consistent memory for PCI DMA */
+};
+
+/**
+ * Memory mapping flags.
+ */
+enum drm_map_flags {
+	_DRM_RESTRICTED = 0x01,	     /**< Cannot be mapped to user-virtual */
+	_DRM_READ_ONLY = 0x02,
+	_DRM_LOCKED = 0x04,	     /**< shared, cached, locked */
+	_DRM_KERNEL = 0x08,	     /**< kernel requires access */
+	_DRM_WRITE_COMBINING = 0x10, /**< use write-combining if available */
+	_DRM_CONTAINS_LOCK = 0x20,   /**< SHM page that contains lock */
+	_DRM_REMOVABLE = 0x40,	     /**< Removable mapping */
+	_DRM_DRIVER = 0x80	     /**< Managed by driver */
+};
+
+struct drm_ctx_priv_map {
+	unsigned int ctx_id;	 /**< Context requesting private mapping */
+	void *handle;		 /**< Handle of map */
+};
+
+/**
+ * DRM_IOCTL_GET_MAP, DRM_IOCTL_ADD_MAP and DRM_IOCTL_RM_MAP ioctls
+ * argument type.
+ *
+ * \sa drmAddMap().
+ */
+struct drm_map {
+	unsigned long offset;	 /**< Requested physical address (0 for SAREA)*/
+	unsigned long size;	 /**< Requested physical size (bytes) */
+	enum drm_map_type type;	 /**< Type of memory to map */
+	enum drm_map_flags flags;	 /**< Flags */
+	void *handle;		 /**< User-space: "Handle" to pass to mmap() */
+				 /**< Kernel-space: kernel-virtual address */
+	int mtrr;		 /**< MTRR slot used */
+	/*   Private data */
+};
+
+/**
+ * DRM_IOCTL_GET_CLIENT ioctl argument type.
+ */
+struct drm_client {
+	int idx;		/**< Which client desired? */
+	int auth;		/**< Is client authenticated? */
+	unsigned long pid;	/**< Process ID */
+	unsigned long uid;	/**< User ID */
+	unsigned long magic;	/**< Magic */
+	unsigned long iocs;	/**< Ioctl count */
+};
+
+enum drm_stat_type {
+	_DRM_STAT_LOCK,
+	_DRM_STAT_OPENS,
+	_DRM_STAT_CLOSES,
+	_DRM_STAT_IOCTLS,
+	_DRM_STAT_LOCKS,
+	_DRM_STAT_UNLOCKS,
+	_DRM_STAT_VALUE,	/**< Generic value */
+	_DRM_STAT_BYTE,		/**< Generic byte counter (1024bytes/K) */
+	_DRM_STAT_COUNT,	/**< Generic non-byte counter (1000/k) */
+
+	_DRM_STAT_IRQ,		/**< IRQ */
+	_DRM_STAT_PRIMARY,	/**< Primary DMA bytes */
+	_DRM_STAT_SECONDARY,	/**< Secondary DMA bytes */
+	_DRM_STAT_DMA,		/**< DMA */
+	_DRM_STAT_SPECIAL,	/**< Special DMA (e.g., priority or polled) */
+	_DRM_STAT_MISSED	/**< Missed DMA opportunity */
+	    /* Add to the *END* of the list */
+};
+
+/**
+ * DRM_IOCTL_GET_STATS ioctl argument type.
+ */
+struct drm_stats {
+	unsigned long count;
+	struct {
+		unsigned long value;
+		enum drm_stat_type type;
+	} data[15];
+};
+
+/**
+ * Hardware locking flags.
+ */
+enum drm_lock_flags {
+	_DRM_LOCK_READY = 0x01,	     /**< Wait until hardware is ready for DMA */
+	_DRM_LOCK_QUIESCENT = 0x02,  /**< Wait until hardware quiescent */
+	_DRM_LOCK_FLUSH = 0x04,	     /**< Flush this context's DMA queue first */
+	_DRM_LOCK_FLUSH_ALL = 0x08,  /**< Flush all DMA queues first */
+	/* These *HALT* flags aren't supported yet
+	   -- they will be used to support the
+	   full-screen DGA-like mode. */
+	_DRM_HALT_ALL_QUEUES = 0x10, /**< Halt all current and future queues */
+	_DRM_HALT_CUR_QUEUES = 0x20  /**< Halt all current queues */
+};
+
+/**
+ * DRM_IOCTL_LOCK, DRM_IOCTL_UNLOCK and DRM_IOCTL_FINISH ioctl argument type.
+ *
+ * \sa drmGetLock() and drmUnlock().
+ */
+struct drm_lock {
+	int context;
+	enum drm_lock_flags flags;
+};
+
+/**
+ * DMA flags
+ *
+ * \warning
+ * These values \e must match xf86drm.h.
+ *
+ * \sa drm_dma.
+ */
+enum drm_dma_flags {
+	/* Flags for DMA buffer dispatch */
+	_DRM_DMA_BLOCK = 0x01,	      /**<
+				       * Block until buffer dispatched.
+				       *
+				       * \note The buffer may not yet have
+				       * been processed by the hardware --
+				       * getting a hardware lock with the
+				       * hardware quiescent will ensure
+				       * that the buffer has been
+				       * processed.
+				       */
+	_DRM_DMA_WHILE_LOCKED = 0x02, /**< Dispatch while lock held */
+	_DRM_DMA_PRIORITY = 0x04,     /**< High priority dispatch */
+
+	/* Flags for DMA buffer request */
+	_DRM_DMA_WAIT = 0x10,	      /**< Wait for free buffers */
+	_DRM_DMA_SMALLER_OK = 0x20,   /**< Smaller-than-requested buffers OK */
+	_DRM_DMA_LARGER_OK = 0x40     /**< Larger-than-requested buffers OK */
+};
+
+/**
+ * DRM_IOCTL_ADD_BUFS and DRM_IOCTL_MARK_BUFS ioctl argument type.
+ *
+ * \sa drmAddBufs().
+ */
+struct drm_buf_desc {
+	int count;		 /**< Number of buffers of this size */
+	int size;		 /**< Size in bytes */
+	int low_mark;		 /**< Low water mark */
+	int high_mark;		 /**< High water mark */
+	enum {
+		_DRM_PAGE_ALIGN = 0x01,	/**< Align on page boundaries for DMA */
+		_DRM_AGP_BUFFER = 0x02,	/**< Buffer is in AGP space */
+		_DRM_SG_BUFFER = 0x04,	/**< Scatter/gather memory buffer */
+		_DRM_FB_BUFFER = 0x08,	/**< Buffer is in frame buffer */
+		_DRM_PCI_BUFFER_RO = 0x10 /**< Map PCI DMA buffer read-only */
+	} flags;
+	unsigned long agp_start; /**<
+				  * Start address of where the AGP buffers are
+				  * in the AGP aperture
+				  */
+};
+
+/**
+ * DRM_IOCTL_INFO_BUFS ioctl argument type.
+ */
+struct drm_buf_info {
+	int count;		/**< Entries in list */
+	struct drm_buf_desc __user *list;
+};
+
+/**
+ * DRM_IOCTL_FREE_BUFS ioctl argument type.
+ */
+struct drm_buf_free {
+	int count;
+	int __user *list;
+};
+
+/**
+ * Buffer information
+ *
+ * \sa drm_buf_map.
+ */
+struct drm_buf_pub {
+	int idx;		       /**< Index into the master buffer list */
+	int total;		       /**< Buffer size */
+	int used;		       /**< Amount of buffer in use (for DMA) */
+	void __user *address;	       /**< Address of buffer */
+};
+
+/**
+ * DRM_IOCTL_MAP_BUFS ioctl argument type.
+ */
+struct drm_buf_map {
+	int count;		/**< Length of the buffer list */
+#ifdef __cplusplus
+	void __user *virt;
+#else
+	void __user *virtual;		/**< Mmap'd area in user-virtual */
+#endif
+	struct drm_buf_pub __user *list;	/**< Buffer information */
+};
+
+/**
+ * DRM_IOCTL_DMA ioctl argument type.
+ *
+ * Indices here refer to the offset into the buffer list in drm_buf_get.
+ *
+ * \sa drmDMA().
+ */
+struct drm_dma {
+	int context;			  /**< Context handle */
+	int send_count;			  /**< Number of buffers to send */
+	int __user *send_indices;	  /**< List of handles to buffers */
+	int __user *send_sizes;		  /**< Lengths of data to send */
+	enum drm_dma_flags flags;	  /**< Flags */
+	int request_count;		  /**< Number of buffers requested */
+	int request_size;		  /**< Desired size for buffers */
+	int __user *request_indices;	  /**< Buffer information */
+	int __user *request_sizes;
+	int granted_count;		  /**< Number of buffers granted */
+};
+
+enum drm_ctx_flags {
+	_DRM_CONTEXT_PRESERVED = 0x01,
+	_DRM_CONTEXT_2DONLY = 0x02
+};
+
+/**
+ * DRM_IOCTL_ADD_CTX ioctl argument type.
+ *
+ * \sa drmCreateContext() and drmDestroyContext().
+ */
+struct drm_ctx {
+	drm_context_t handle;
+	enum drm_ctx_flags flags;
+};
+
+/**
+ * DRM_IOCTL_RES_CTX ioctl argument type.
+ */
+struct drm_ctx_res {
+	int count;
+	struct drm_ctx __user *contexts;
+};
+
+/**
+ * DRM_IOCTL_ADD_DRAW and DRM_IOCTL_RM_DRAW ioctl argument type.
+ */
+struct drm_draw {
+	drm_drawable_t handle;
+};
+
+/**
+ * DRM_IOCTL_UPDATE_DRAW ioctl argument type.
+ */
+typedef enum {
+	DRM_DRAWABLE_CLIPRECTS
+} drm_drawable_info_type_t;
+
+struct drm_update_draw {
+	drm_drawable_t handle;
+	unsigned int type;
+	unsigned int num;
+	unsigned long long data;
+};
+
+/**
+ * DRM_IOCTL_GET_MAGIC and DRM_IOCTL_AUTH_MAGIC ioctl argument type.
+ */
+struct drm_auth {
+	drm_magic_t magic;
+};
+
+/**
+ * DRM_IOCTL_IRQ_BUSID ioctl argument type.
+ *
+ * \sa drmGetInterruptFromBusID().
+ */
+struct drm_irq_busid {
+	int irq;	/**< IRQ number */
+	int busnum;	/**< bus number */
+	int devnum;	/**< device number */
+	int funcnum;	/**< function number */
+};
+
+enum drm_vblank_seq_type {
+	_DRM_VBLANK_ABSOLUTE = 0x0,	/**< Wait for specific vblank sequence number */
+	_DRM_VBLANK_RELATIVE = 0x1,	/**< Wait for given number of vblanks */
+	/* bits 1-6 are reserved for high crtcs */
+	_DRM_VBLANK_HIGH_CRTC_MASK = 0x0000003e,
+	_DRM_VBLANK_EVENT = 0x4000000,   /**< Send event instead of blocking */
+	_DRM_VBLANK_FLIP = 0x8000000,   /**< Scheduled buffer swap should flip */
+	_DRM_VBLANK_NEXTONMISS = 0x10000000,	/**< If missed, wait for next vblank */
+	_DRM_VBLANK_SECONDARY = 0x20000000,	/**< Secondary display controller */
+	_DRM_VBLANK_SIGNAL = 0x40000000	/**< Send signal instead of blocking, unsupported */
+};
+#define _DRM_VBLANK_HIGH_CRTC_SHIFT 1
+
+#define _DRM_VBLANK_TYPES_MASK (_DRM_VBLANK_ABSOLUTE | _DRM_VBLANK_RELATIVE)
+#define _DRM_VBLANK_FLAGS_MASK (_DRM_VBLANK_EVENT | _DRM_VBLANK_SIGNAL | \
+				_DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)
+
+struct drm_wait_vblank_request {
+	enum drm_vblank_seq_type type;
+	unsigned int sequence;
+	unsigned long signal;
+};
+
+struct drm_wait_vblank_reply {
+	enum drm_vblank_seq_type type;
+	unsigned int sequence;
+	long tval_sec;
+	long tval_usec;
+};
+
+/**
+ * DRM_IOCTL_WAIT_VBLANK ioctl argument type.
+ *
+ * \sa drmWaitVBlank().
+ */
+union drm_wait_vblank {
+	struct drm_wait_vblank_request request;
+	struct drm_wait_vblank_reply reply;
+};
+
+#define _DRM_PRE_MODESET 1
+#define _DRM_POST_MODESET 2
+
+/**
+ * DRM_IOCTL_MODESET_CTL ioctl argument type
+ *
+ * \sa drmModesetCtl().
+ */
+struct drm_modeset_ctl {
+	__u32 crtc;
+	__u32 cmd;
+};
+
+/**
+ * DRM_IOCTL_AGP_ENABLE ioctl argument type.
+ *
+ * \sa drmAgpEnable().
+ */
+struct drm_agp_mode {
+	unsigned long mode;	/**< AGP mode */
+};
+
+/**
+ * DRM_IOCTL_AGP_ALLOC and DRM_IOCTL_AGP_FREE ioctls argument type.
+ *
+ * \sa drmAgpAlloc() and drmAgpFree().
+ */
+struct drm_agp_buffer {
+	unsigned long size;	/**< In bytes -- will round to page boundary */
+	unsigned long handle;	/**< Used for binding / unbinding */
+	unsigned long type;	/**< Type of memory to allocate */
+	unsigned long physical;	/**< Physical used by i810 */
+};
+
+/**
+ * DRM_IOCTL_AGP_BIND and DRM_IOCTL_AGP_UNBIND ioctls argument type.
+ *
+ * \sa drmAgpBind() and drmAgpUnbind().
+ */
+struct drm_agp_binding {
+	unsigned long handle;	/**< From drm_agp_buffer */
+	unsigned long offset;	/**< In bytes -- will round to page boundary */
+};
+
+/**
+ * DRM_IOCTL_AGP_INFO ioctl argument type.
+ *
+ * \sa drmAgpVersionMajor(), drmAgpVersionMinor(), drmAgpGetMode(),
+ * drmAgpBase(), drmAgpSize(), drmAgpMemoryUsed(), drmAgpMemoryAvail(),
+ * drmAgpVendorId() and drmAgpDeviceId().
+ */
+struct drm_agp_info {
+	int agp_version_major;
+	int agp_version_minor;
+	unsigned long mode;
+	unsigned long aperture_base;	/* physical address */
+	unsigned long aperture_size;	/* bytes */
+	unsigned long memory_allowed;	/* bytes */
+	unsigned long memory_used;
+
+	/* PCI information */
+	unsigned short id_vendor;
+	unsigned short id_device;
+};
+
+/**
+ * DRM_IOCTL_SG_ALLOC ioctl argument type.
+ */
+struct drm_scatter_gather {
+	unsigned long size;	/**< In bytes -- will round to page boundary */
+	unsigned long handle;	/**< Used for mapping / unmapping */
+};
+
+/**
+ * DRM_IOCTL_SET_VERSION ioctl argument type.
+ */
+struct drm_set_version {
+	int drm_di_major;
+	int drm_di_minor;
+	int drm_dd_major;
+	int drm_dd_minor;
+};
+
+/** DRM_IOCTL_GEM_CLOSE ioctl argument type */
+struct drm_gem_close {
+	/** Handle of the object to be closed. */
+	__u32 handle;
+	__u32 pad;
+};
+
+/** DRM_IOCTL_GEM_FLINK ioctl argument type */
+struct drm_gem_flink {
+	/** Handle for the object being named */
+	__u32 handle;
+
+	/** Returned global name */
+	__u32 name;
+};
+
+/** DRM_IOCTL_GEM_OPEN ioctl argument type */
+struct drm_gem_open {
+	/** Name of object being opened */
+	__u32 name;
+
+	/** Returned handle for the object */
+	__u32 handle;
+
+	/** Returned size of the object */
+	__u64 size;
+};
+
+#define DRM_CAP_DUMB_BUFFER		0x1
+#define DRM_CAP_VBLANK_HIGH_CRTC	0x2
+#define DRM_CAP_DUMB_PREFERRED_DEPTH	0x3
+#define DRM_CAP_DUMB_PREFER_SHADOW	0x4
+#define DRM_CAP_PRIME			0x5
+#define  DRM_PRIME_CAP_IMPORT		0x1
+#define  DRM_PRIME_CAP_EXPORT		0x2
+#define DRM_CAP_TIMESTAMP_MONOTONIC	0x6
+#define DRM_CAP_ASYNC_PAGE_FLIP		0x7
+/*
+ * The CURSOR_WIDTH and CURSOR_HEIGHT capabilities return a valid widthxheight
+ * combination for the hardware cursor. The intention is that a hardware
+ * agnostic userspace can query a cursor plane size to use.
+ *
+ * Note that the cross-driver contract is to merely return a valid size;
+ * drivers are free to attach another meaning on top, eg. i915 returns the
+ * maximum plane size.
+ */
+#define DRM_CAP_CURSOR_WIDTH		0x8
+#define DRM_CAP_CURSOR_HEIGHT		0x9
+#define DRM_CAP_ADDFB2_MODIFIERS	0x10
+#define DRM_CAP_PAGE_FLIP_TARGET	0x11
+#define DRM_CAP_CRTC_IN_VBLANK_EVENT	0x12
+#define DRM_CAP_SYNCOBJ		0x13
+
+/** DRM_IOCTL_GET_CAP ioctl argument type */
+struct drm_get_cap {
+	__u64 capability;
+	__u64 value;
+};
+
+/**
+ * DRM_CLIENT_CAP_STEREO_3D
+ *
+ * if set to 1, the DRM core will expose the stereo 3D capabilities of the
+ * monitor by advertising the supported 3D layouts in the flags of struct
+ * drm_mode_modeinfo.
+ */
+#define DRM_CLIENT_CAP_STEREO_3D	1
+
+/**
+ * DRM_CLIENT_CAP_UNIVERSAL_PLANES
+ *
+ * If set to 1, the DRM core will expose all planes (overlay, primary, and
+ * cursor) to userspace.
+ */
+#define DRM_CLIENT_CAP_UNIVERSAL_PLANES  2
+
+/**
+ * DRM_CLIENT_CAP_ATOMIC
+ *
+ * If set to 1, the DRM core will expose atomic properties to userspace
+ */
+#define DRM_CLIENT_CAP_ATOMIC	3
+
+/**
+ * DRM_CLIENT_CAP_ASPECT_RATIO
+ *
+ * If set to 1, the DRM core will provide aspect ratio information in modes.
+ */
+#define DRM_CLIENT_CAP_ASPECT_RATIO    4
+
+/**
+ * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS
+ *
+ * If set to 1, the DRM core will expose special connectors to be used for
+ * writing back to memory the scene setup in the commit. Depends on client
+ * also supporting DRM_CLIENT_CAP_ATOMIC
+ */
+#define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS	5
+
+/** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
+struct drm_set_client_cap {
+	__u64 capability;
+	__u64 value;
+};
+
+#define DRM_RDWR O_RDWR
+#define DRM_CLOEXEC O_CLOEXEC
+struct drm_prime_handle {
+	__u32 handle;
+
+	/** Flags.. only applicable for handle->fd */
+	__u32 flags;
+
+	/** Returned dmabuf file descriptor */
+	__s32 fd;
+};
+
+struct drm_syncobj_create {
+	__u32 handle;
+#define DRM_SYNCOBJ_CREATE_SIGNALED (1 << 0)
+	__u32 flags;
+};
+
+struct drm_syncobj_destroy {
+	__u32 handle;
+	__u32 pad;
+};
+
+#define DRM_SYNCOBJ_FD_TO_HANDLE_FLAGS_IMPORT_SYNC_FILE (1 << 0)
+#define DRM_SYNCOBJ_HANDLE_TO_FD_FLAGS_EXPORT_SYNC_FILE (1 << 0)
+struct drm_syncobj_handle {
+	__u32 handle;
+	__u32 flags;
+
+	__s32 fd;
+	__u32 pad;
+};
+
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_ALL (1 << 0)
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT (1 << 1)
+struct drm_syncobj_wait {
+	__u64 handles;
+	/* absolute timeout */
+	__s64 timeout_nsec;
+	__u32 count_handles;
+	__u32 flags;
+	__u32 first_signaled; /* only valid when not waiting all */
+	__u32 pad;
+};
+
+struct drm_syncobj_array {
+	__u64 handles;
+	__u32 count_handles;
+	__u32 pad;
+};
+
+/* Query current scanout sequence number */
+struct drm_crtc_get_sequence {
+	__u32 crtc_id;		/* requested crtc_id */
+	__u32 active;		/* return: crtc output is active */
+	__u64 sequence;		/* return: most recent vblank sequence */
+	__s64 sequence_ns;	/* return: most recent time of first pixel out */
+};
+
+/* Queue event to be delivered at specified sequence. Time stamp marks
+ * when the first pixel of the refresh cycle leaves the display engine
+ * for the display
+ */
+#define DRM_CRTC_SEQUENCE_RELATIVE		0x00000001	/* sequence is relative to current */
+#define DRM_CRTC_SEQUENCE_NEXT_ON_MISS		0x00000002	/* Use next sequence if we've missed */
+
+struct drm_crtc_queue_sequence {
+	__u32 crtc_id;
+	__u32 flags;
+	__u64 sequence;		/* on input, target sequence. on output, actual sequence */
+	__u64 user_data;	/* user data passed to event */
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#include "drm_mode.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_IOCTL_BASE			'd'
+#define DRM_IO(nr)			_IO(DRM_IOCTL_BASE,nr)
+#define DRM_IOR(nr,type)		_IOR(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOW(nr,type)		_IOW(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOWR(nr,type)		_IOWR(DRM_IOCTL_BASE,nr,type)
+
+#define DRM_IOCTL_VERSION		DRM_IOWR(0x00, struct drm_version)
+#define DRM_IOCTL_GET_UNIQUE		DRM_IOWR(0x01, struct drm_unique)
+#define DRM_IOCTL_GET_MAGIC		DRM_IOR( 0x02, struct drm_auth)
+#define DRM_IOCTL_IRQ_BUSID		DRM_IOWR(0x03, struct drm_irq_busid)
+#define DRM_IOCTL_GET_MAP               DRM_IOWR(0x04, struct drm_map)
+#define DRM_IOCTL_GET_CLIENT            DRM_IOWR(0x05, struct drm_client)
+#define DRM_IOCTL_GET_STATS             DRM_IOR( 0x06, struct drm_stats)
+#define DRM_IOCTL_SET_VERSION		DRM_IOWR(0x07, struct drm_set_version)
+#define DRM_IOCTL_MODESET_CTL           DRM_IOW(0x08, struct drm_modeset_ctl)
+#define DRM_IOCTL_GEM_CLOSE		DRM_IOW (0x09, struct drm_gem_close)
+#define DRM_IOCTL_GEM_FLINK		DRM_IOWR(0x0a, struct drm_gem_flink)
+#define DRM_IOCTL_GEM_OPEN		DRM_IOWR(0x0b, struct drm_gem_open)
+#define DRM_IOCTL_GET_CAP		DRM_IOWR(0x0c, struct drm_get_cap)
+#define DRM_IOCTL_SET_CLIENT_CAP	DRM_IOW( 0x0d, struct drm_set_client_cap)
+
+#define DRM_IOCTL_SET_UNIQUE		DRM_IOW( 0x10, struct drm_unique)
+#define DRM_IOCTL_AUTH_MAGIC		DRM_IOW( 0x11, struct drm_auth)
+#define DRM_IOCTL_BLOCK			DRM_IOWR(0x12, struct drm_block)
+#define DRM_IOCTL_UNBLOCK		DRM_IOWR(0x13, struct drm_block)
+#define DRM_IOCTL_CONTROL		DRM_IOW( 0x14, struct drm_control)
+#define DRM_IOCTL_ADD_MAP		DRM_IOWR(0x15, struct drm_map)
+#define DRM_IOCTL_ADD_BUFS		DRM_IOWR(0x16, struct drm_buf_desc)
+#define DRM_IOCTL_MARK_BUFS		DRM_IOW( 0x17, struct drm_buf_desc)
+#define DRM_IOCTL_INFO_BUFS		DRM_IOWR(0x18, struct drm_buf_info)
+#define DRM_IOCTL_MAP_BUFS		DRM_IOWR(0x19, struct drm_buf_map)
+#define DRM_IOCTL_FREE_BUFS		DRM_IOW( 0x1a, struct drm_buf_free)
+
+#define DRM_IOCTL_RM_MAP		DRM_IOW( 0x1b, struct drm_map)
+
+#define DRM_IOCTL_SET_SAREA_CTX		DRM_IOW( 0x1c, struct drm_ctx_priv_map)
+#define DRM_IOCTL_GET_SAREA_CTX 	DRM_IOWR(0x1d, struct drm_ctx_priv_map)
+
+#define DRM_IOCTL_SET_MASTER            DRM_IO(0x1e)
+#define DRM_IOCTL_DROP_MASTER           DRM_IO(0x1f)
+
+#define DRM_IOCTL_ADD_CTX		DRM_IOWR(0x20, struct drm_ctx)
+#define DRM_IOCTL_RM_CTX		DRM_IOWR(0x21, struct drm_ctx)
+#define DRM_IOCTL_MOD_CTX		DRM_IOW( 0x22, struct drm_ctx)
+#define DRM_IOCTL_GET_CTX		DRM_IOWR(0x23, struct drm_ctx)
+#define DRM_IOCTL_SWITCH_CTX		DRM_IOW( 0x24, struct drm_ctx)
+#define DRM_IOCTL_NEW_CTX		DRM_IOW( 0x25, struct drm_ctx)
+#define DRM_IOCTL_RES_CTX		DRM_IOWR(0x26, struct drm_ctx_res)
+#define DRM_IOCTL_ADD_DRAW		DRM_IOWR(0x27, struct drm_draw)
+#define DRM_IOCTL_RM_DRAW		DRM_IOWR(0x28, struct drm_draw)
+#define DRM_IOCTL_DMA			DRM_IOWR(0x29, struct drm_dma)
+#define DRM_IOCTL_LOCK			DRM_IOW( 0x2a, struct drm_lock)
+#define DRM_IOCTL_UNLOCK		DRM_IOW( 0x2b, struct drm_lock)
+#define DRM_IOCTL_FINISH		DRM_IOW( 0x2c, struct drm_lock)
+
+#define DRM_IOCTL_PRIME_HANDLE_TO_FD    DRM_IOWR(0x2d, struct drm_prime_handle)
+#define DRM_IOCTL_PRIME_FD_TO_HANDLE    DRM_IOWR(0x2e, struct drm_prime_handle)
+
+#define DRM_IOCTL_AGP_ACQUIRE		DRM_IO(  0x30)
+#define DRM_IOCTL_AGP_RELEASE		DRM_IO(  0x31)
+#define DRM_IOCTL_AGP_ENABLE		DRM_IOW( 0x32, struct drm_agp_mode)
+#define DRM_IOCTL_AGP_INFO		DRM_IOR( 0x33, struct drm_agp_info)
+#define DRM_IOCTL_AGP_ALLOC		DRM_IOWR(0x34, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_FREE		DRM_IOW( 0x35, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_BIND		DRM_IOW( 0x36, struct drm_agp_binding)
+#define DRM_IOCTL_AGP_UNBIND		DRM_IOW( 0x37, struct drm_agp_binding)
+
+#define DRM_IOCTL_SG_ALLOC		DRM_IOWR(0x38, struct drm_scatter_gather)
+#define DRM_IOCTL_SG_FREE		DRM_IOW( 0x39, struct drm_scatter_gather)
+
+#define DRM_IOCTL_WAIT_VBLANK		DRM_IOWR(0x3a, union drm_wait_vblank)
+
+#define DRM_IOCTL_CRTC_GET_SEQUENCE	DRM_IOWR(0x3b, struct drm_crtc_get_sequence)
+#define DRM_IOCTL_CRTC_QUEUE_SEQUENCE	DRM_IOWR(0x3c, struct drm_crtc_queue_sequence)
+
+#define DRM_IOCTL_UPDATE_DRAW		DRM_IOW(0x3f, struct drm_update_draw)
+
+#define DRM_IOCTL_MODE_GETRESOURCES	DRM_IOWR(0xA0, struct drm_mode_card_res)
+#define DRM_IOCTL_MODE_GETCRTC		DRM_IOWR(0xA1, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_SETCRTC		DRM_IOWR(0xA2, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_CURSOR		DRM_IOWR(0xA3, struct drm_mode_cursor)
+#define DRM_IOCTL_MODE_GETGAMMA		DRM_IOWR(0xA4, struct drm_mode_crtc_lut)
+#define DRM_IOCTL_MODE_SETGAMMA		DRM_IOWR(0xA5, struct drm_mode_crtc_lut)
+#define DRM_IOCTL_MODE_GETENCODER	DRM_IOWR(0xA6, struct drm_mode_get_encoder)
+#define DRM_IOCTL_MODE_GETCONNECTOR	DRM_IOWR(0xA7, struct drm_mode_get_connector)
+#define DRM_IOCTL_MODE_ATTACHMODE	DRM_IOWR(0xA8, struct drm_mode_mode_cmd) /* deprecated (never worked) */
+#define DRM_IOCTL_MODE_DETACHMODE	DRM_IOWR(0xA9, struct drm_mode_mode_cmd) /* deprecated (never worked) */
+
+#define DRM_IOCTL_MODE_GETPROPERTY	DRM_IOWR(0xAA, struct drm_mode_get_property)
+#define DRM_IOCTL_MODE_SETPROPERTY	DRM_IOWR(0xAB, struct drm_mode_connector_set_property)
+#define DRM_IOCTL_MODE_GETPROPBLOB	DRM_IOWR(0xAC, struct drm_mode_get_blob)
+#define DRM_IOCTL_MODE_GETFB		DRM_IOWR(0xAD, struct drm_mode_fb_cmd)
+#define DRM_IOCTL_MODE_ADDFB		DRM_IOWR(0xAE, struct drm_mode_fb_cmd)
+#define DRM_IOCTL_MODE_RMFB		DRM_IOWR(0xAF, unsigned int)
+#define DRM_IOCTL_MODE_PAGE_FLIP	DRM_IOWR(0xB0, struct drm_mode_crtc_page_flip)
+#define DRM_IOCTL_MODE_DIRTYFB		DRM_IOWR(0xB1, struct drm_mode_fb_dirty_cmd)
+
+#define DRM_IOCTL_MODE_CREATE_DUMB DRM_IOWR(0xB2, struct drm_mode_create_dumb)
+#define DRM_IOCTL_MODE_MAP_DUMB    DRM_IOWR(0xB3, struct drm_mode_map_dumb)
+#define DRM_IOCTL_MODE_DESTROY_DUMB    DRM_IOWR(0xB4, struct drm_mode_destroy_dumb)
+#define DRM_IOCTL_MODE_GETPLANERESOURCES DRM_IOWR(0xB5, struct drm_mode_get_plane_res)
+#define DRM_IOCTL_MODE_GETPLANE	DRM_IOWR(0xB6, struct drm_mode_get_plane)
+#define DRM_IOCTL_MODE_SETPLANE	DRM_IOWR(0xB7, struct drm_mode_set_plane)
+#define DRM_IOCTL_MODE_ADDFB2		DRM_IOWR(0xB8, struct drm_mode_fb_cmd2)
+#define DRM_IOCTL_MODE_OBJ_GETPROPERTIES	DRM_IOWR(0xB9, struct drm_mode_obj_get_properties)
+#define DRM_IOCTL_MODE_OBJ_SETPROPERTY	DRM_IOWR(0xBA, struct drm_mode_obj_set_property)
+#define DRM_IOCTL_MODE_CURSOR2		DRM_IOWR(0xBB, struct drm_mode_cursor2)
+#define DRM_IOCTL_MODE_ATOMIC		DRM_IOWR(0xBC, struct drm_mode_atomic)
+#define DRM_IOCTL_MODE_CREATEPROPBLOB	DRM_IOWR(0xBD, struct drm_mode_create_blob)
+#define DRM_IOCTL_MODE_DESTROYPROPBLOB	DRM_IOWR(0xBE, struct drm_mode_destroy_blob)
+
+#define DRM_IOCTL_SYNCOBJ_CREATE	DRM_IOWR(0xBF, struct drm_syncobj_create)
+#define DRM_IOCTL_SYNCOBJ_DESTROY	DRM_IOWR(0xC0, struct drm_syncobj_destroy)
+#define DRM_IOCTL_SYNCOBJ_HANDLE_TO_FD	DRM_IOWR(0xC1, struct drm_syncobj_handle)
+#define DRM_IOCTL_SYNCOBJ_FD_TO_HANDLE	DRM_IOWR(0xC2, struct drm_syncobj_handle)
+#define DRM_IOCTL_SYNCOBJ_WAIT		DRM_IOWR(0xC3, struct drm_syncobj_wait)
+#define DRM_IOCTL_SYNCOBJ_RESET		DRM_IOWR(0xC4, struct drm_syncobj_array)
+#define DRM_IOCTL_SYNCOBJ_SIGNAL	DRM_IOWR(0xC5, struct drm_syncobj_array)
+
+#define DRM_IOCTL_MODE_CREATE_LEASE	DRM_IOWR(0xC6, struct drm_mode_create_lease)
+#define DRM_IOCTL_MODE_LIST_LESSEES	DRM_IOWR(0xC7, struct drm_mode_list_lessees)
+#define DRM_IOCTL_MODE_GET_LEASE	DRM_IOWR(0xC8, struct drm_mode_get_lease)
+#define DRM_IOCTL_MODE_REVOKE_LEASE	DRM_IOWR(0xC9, struct drm_mode_revoke_lease)
+
+/**
+ * Device specific ioctls should only be in their respective headers
+ * The device specific ioctl range is from 0x40 to 0x9f.
+ * Generic IOCTLS restart at 0xA0.
+ *
+ * \sa drmCommandNone(), drmCommandRead(), drmCommandWrite(), and
+ * drmCommandReadWrite().
+ */
+#define DRM_COMMAND_BASE                0x40
+#define DRM_COMMAND_END			0xA0
+
+/**
+ * Header for events written back to userspace on the drm fd.  The
+ * type defines the type of event, the length specifies the total
+ * length of the event (including the header), and user_data is
+ * typically a 64 bit value passed with the ioctl that triggered the
+ * event.  A read on the drm fd will always only return complete
+ * events, that is, if for example the read buffer is 100 bytes, and
+ * there are two 64 byte events pending, only one will be returned.
+ *
+ * Event types 0 - 0x7fffffff are generic drm events, 0x80000000 and
+ * up are chipset specific.
+ */
+struct drm_event {
+	__u32 type;
+	__u32 length;
+};
+
+#define DRM_EVENT_VBLANK 0x01
+#define DRM_EVENT_FLIP_COMPLETE 0x02
+#define DRM_EVENT_CRTC_SEQUENCE	0x03
+
+struct drm_event_vblank {
+	struct drm_event base;
+	__u64 user_data;
+	__u32 tv_sec;
+	__u32 tv_usec;
+	__u32 sequence;
+	__u32 crtc_id; /* 0 on older kernels that do not support this */
+};
+
+/* Event delivered at sequence. Time stamp marks when the first pixel
+ * of the refresh cycle leaves the display engine for the display
+ */
+struct drm_event_crtc_sequence {
+	struct drm_event	base;
+	__u64			user_data;
+	__s64			time_ns;
+	__u64			sequence;
+};
+
+/* typedef area */
+#ifndef __KERNEL__
+typedef struct drm_clip_rect drm_clip_rect_t;
+typedef struct drm_drawable_info drm_drawable_info_t;
+typedef struct drm_tex_region drm_tex_region_t;
+typedef struct drm_hw_lock drm_hw_lock_t;
+typedef struct drm_version drm_version_t;
+typedef struct drm_unique drm_unique_t;
+typedef struct drm_list drm_list_t;
+typedef struct drm_block drm_block_t;
+typedef struct drm_control drm_control_t;
+typedef enum drm_map_type drm_map_type_t;
+typedef enum drm_map_flags drm_map_flags_t;
+typedef struct drm_ctx_priv_map drm_ctx_priv_map_t;
+typedef struct drm_map drm_map_t;
+typedef struct drm_client drm_client_t;
+typedef enum drm_stat_type drm_stat_type_t;
+typedef struct drm_stats drm_stats_t;
+typedef enum drm_lock_flags drm_lock_flags_t;
+typedef struct drm_lock drm_lock_t;
+typedef enum drm_dma_flags drm_dma_flags_t;
+typedef struct drm_buf_desc drm_buf_desc_t;
+typedef struct drm_buf_info drm_buf_info_t;
+typedef struct drm_buf_free drm_buf_free_t;
+typedef struct drm_buf_pub drm_buf_pub_t;
+typedef struct drm_buf_map drm_buf_map_t;
+typedef struct drm_dma drm_dma_t;
+typedef union drm_wait_vblank drm_wait_vblank_t;
+typedef struct drm_agp_mode drm_agp_mode_t;
+typedef enum drm_ctx_flags drm_ctx_flags_t;
+typedef struct drm_ctx drm_ctx_t;
+typedef struct drm_ctx_res drm_ctx_res_t;
+typedef struct drm_draw drm_draw_t;
+typedef struct drm_update_draw drm_update_draw_t;
+typedef struct drm_auth drm_auth_t;
+typedef struct drm_irq_busid drm_irq_busid_t;
+typedef enum drm_vblank_seq_type drm_vblank_seq_type_t;
+
+typedef struct drm_agp_buffer drm_agp_buffer_t;
+typedef struct drm_agp_binding drm_agp_binding_t;
+typedef struct drm_agp_info drm_agp_info_t;
+typedef struct drm_scatter_gather drm_scatter_gather_t;
+typedef struct drm_set_version drm_set_version_t;
+#endif
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/tools/include/uapi/drm/i915_drm.h b/tools/include/uapi/drm/i915_drm.h
new file mode 100644
index 000000000..7f5634ce8
--- /dev/null
+++ b/tools/include/uapi/drm/i915_drm.h
@@ -0,0 +1,1724 @@
+/*
+ * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _UAPI_I915_DRM_H_
+#define _UAPI_I915_DRM_H_
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints.
+ */
+
+/**
+ * DOC: uevents generated by i915 on it's device node
+ *
+ * I915_L3_PARITY_UEVENT - Generated when the driver receives a parity mismatch
+ *	event from the gpu l3 cache. Additional information supplied is ROW,
+ *	BANK, SUBBANK, SLICE of the affected cacheline. Userspace should keep
+ *	track of these events and if a specific cache-line seems to have a
+ *	persistent error remap it with the l3 remapping tool supplied in
+ *	intel-gpu-tools.  The value supplied with the event is always 1.
+ *
+ * I915_ERROR_UEVENT - Generated upon error detection, currently only via
+ *	hangcheck. The error detection event is a good indicator of when things
+ *	began to go badly. The value supplied with the event is a 1 upon error
+ *	detection, and a 0 upon reset completion, signifying no more error
+ *	exists. NOTE: Disabling hangcheck or reset via module parameter will
+ *	cause the related events to not be seen.
+ *
+ * I915_RESET_UEVENT - Event is generated just before an attempt to reset the
+ *	the GPU. The value supplied with the event is always 1. NOTE: Disable
+ *	reset via module parameter will cause this event to not be seen.
+ */
+#define I915_L3_PARITY_UEVENT		"L3_PARITY_ERROR"
+#define I915_ERROR_UEVENT		"ERROR"
+#define I915_RESET_UEVENT		"RESET"
+
+/*
+ * MOCS indexes used for GPU surfaces, defining the cacheability of the
+ * surface data and the coherency for this data wrt. CPU vs. GPU accesses.
+ */
+enum i915_mocs_table_index {
+	/*
+	 * Not cached anywhere, coherency between CPU and GPU accesses is
+	 * guaranteed.
+	 */
+	I915_MOCS_UNCACHED,
+	/*
+	 * Cacheability and coherency controlled by the kernel automatically
+	 * based on the DRM_I915_GEM_SET_CACHING IOCTL setting and the current
+	 * usage of the surface (used for display scanout or not).
+	 */
+	I915_MOCS_PTE,
+	/*
+	 * Cached in all GPU caches available on the platform.
+	 * Coherency between CPU and GPU accesses to the surface is not
+	 * guaranteed without extra synchronization.
+	 */
+	I915_MOCS_CACHED,
+};
+
+/*
+ * Different engines serve different roles, and there may be more than one
+ * engine serving each role. enum drm_i915_gem_engine_class provides a
+ * classification of the role of the engine, which may be used when requesting
+ * operations to be performed on a certain subset of engines, or for providing
+ * information about that group.
+ */
+enum drm_i915_gem_engine_class {
+	I915_ENGINE_CLASS_RENDER	= 0,
+	I915_ENGINE_CLASS_COPY		= 1,
+	I915_ENGINE_CLASS_VIDEO		= 2,
+	I915_ENGINE_CLASS_VIDEO_ENHANCE	= 3,
+
+	I915_ENGINE_CLASS_INVALID	= -1
+};
+
+/**
+ * DOC: perf_events exposed by i915 through /sys/bus/event_sources/drivers/i915
+ *
+ */
+
+enum drm_i915_pmu_engine_sample {
+	I915_SAMPLE_BUSY = 0,
+	I915_SAMPLE_WAIT = 1,
+	I915_SAMPLE_SEMA = 2
+};
+
+#define I915_PMU_SAMPLE_BITS (4)
+#define I915_PMU_SAMPLE_MASK (0xf)
+#define I915_PMU_SAMPLE_INSTANCE_BITS (8)
+#define I915_PMU_CLASS_SHIFT \
+	(I915_PMU_SAMPLE_BITS + I915_PMU_SAMPLE_INSTANCE_BITS)
+
+#define __I915_PMU_ENGINE(class, instance, sample) \
+	((class) << I915_PMU_CLASS_SHIFT | \
+	(instance) << I915_PMU_SAMPLE_BITS | \
+	(sample))
+
+#define I915_PMU_ENGINE_BUSY(class, instance) \
+	__I915_PMU_ENGINE(class, instance, I915_SAMPLE_BUSY)
+
+#define I915_PMU_ENGINE_WAIT(class, instance) \
+	__I915_PMU_ENGINE(class, instance, I915_SAMPLE_WAIT)
+
+#define I915_PMU_ENGINE_SEMA(class, instance) \
+	__I915_PMU_ENGINE(class, instance, I915_SAMPLE_SEMA)
+
+#define __I915_PMU_OTHER(x) (__I915_PMU_ENGINE(0xff, 0xff, 0xf) + 1 + (x))
+
+#define I915_PMU_ACTUAL_FREQUENCY	__I915_PMU_OTHER(0)
+#define I915_PMU_REQUESTED_FREQUENCY	__I915_PMU_OTHER(1)
+#define I915_PMU_INTERRUPTS		__I915_PMU_OTHER(2)
+#define I915_PMU_RC6_RESIDENCY		__I915_PMU_OTHER(3)
+
+#define I915_PMU_LAST I915_PMU_RC6_RESIDENCY
+
+/* Each region is a minimum of 16k, and there are at most 255 of them.
+ */
+#define I915_NR_TEX_REGIONS 255	/* table size 2k - maximum due to use
+				 * of chars for next/prev indices */
+#define I915_LOG_MIN_TEX_REGION_SIZE 14
+
+typedef struct _drm_i915_init {
+	enum {
+		I915_INIT_DMA = 0x01,
+		I915_CLEANUP_DMA = 0x02,
+		I915_RESUME_DMA = 0x03
+	} func;
+	unsigned int mmio_offset;
+	int sarea_priv_offset;
+	unsigned int ring_start;
+	unsigned int ring_end;
+	unsigned int ring_size;
+	unsigned int front_offset;
+	unsigned int back_offset;
+	unsigned int depth_offset;
+	unsigned int w;
+	unsigned int h;
+	unsigned int pitch;
+	unsigned int pitch_bits;
+	unsigned int back_pitch;
+	unsigned int depth_pitch;
+	unsigned int cpp;
+	unsigned int chipset;
+} drm_i915_init_t;
+
+typedef struct _drm_i915_sarea {
+	struct drm_tex_region texList[I915_NR_TEX_REGIONS + 1];
+	int last_upload;	/* last time texture was uploaded */
+	int last_enqueue;	/* last time a buffer was enqueued */
+	int last_dispatch;	/* age of the most recently dispatched buffer */
+	int ctxOwner;		/* last context to upload state */
+	int texAge;
+	int pf_enabled;		/* is pageflipping allowed? */
+	int pf_active;
+	int pf_current_page;	/* which buffer is being displayed? */
+	int perf_boxes;		/* performance boxes to be displayed */
+	int width, height;      /* screen size in pixels */
+
+	drm_handle_t front_handle;
+	int front_offset;
+	int front_size;
+
+	drm_handle_t back_handle;
+	int back_offset;
+	int back_size;
+
+	drm_handle_t depth_handle;
+	int depth_offset;
+	int depth_size;
+
+	drm_handle_t tex_handle;
+	int tex_offset;
+	int tex_size;
+	int log_tex_granularity;
+	int pitch;
+	int rotation;           /* 0, 90, 180 or 270 */
+	int rotated_offset;
+	int rotated_size;
+	int rotated_pitch;
+	int virtualX, virtualY;
+
+	unsigned int front_tiled;
+	unsigned int back_tiled;
+	unsigned int depth_tiled;
+	unsigned int rotated_tiled;
+	unsigned int rotated2_tiled;
+
+	int pipeA_x;
+	int pipeA_y;
+	int pipeA_w;
+	int pipeA_h;
+	int pipeB_x;
+	int pipeB_y;
+	int pipeB_w;
+	int pipeB_h;
+
+	/* fill out some space for old userspace triple buffer */
+	drm_handle_t unused_handle;
+	__u32 unused1, unused2, unused3;
+
+	/* buffer object handles for static buffers. May change
+	 * over the lifetime of the client.
+	 */
+	__u32 front_bo_handle;
+	__u32 back_bo_handle;
+	__u32 unused_bo_handle;
+	__u32 depth_bo_handle;
+
+} drm_i915_sarea_t;
+
+/* due to userspace building against these headers we need some compat here */
+#define planeA_x pipeA_x
+#define planeA_y pipeA_y
+#define planeA_w pipeA_w
+#define planeA_h pipeA_h
+#define planeB_x pipeB_x
+#define planeB_y pipeB_y
+#define planeB_w pipeB_w
+#define planeB_h pipeB_h
+
+/* Flags for perf_boxes
+ */
+#define I915_BOX_RING_EMPTY    0x1
+#define I915_BOX_FLIP          0x2
+#define I915_BOX_WAIT          0x4
+#define I915_BOX_TEXTURE_LOAD  0x8
+#define I915_BOX_LOST_CONTEXT  0x10
+
+/*
+ * i915 specific ioctls.
+ *
+ * The device specific ioctl range is [DRM_COMMAND_BASE, DRM_COMMAND_END) ie
+ * [0x40, 0xa0) (a0 is excluded). The numbers below are defined as offset
+ * against DRM_COMMAND_BASE and should be between [0x0, 0x60).
+ */
+#define DRM_I915_INIT		0x00
+#define DRM_I915_FLUSH		0x01
+#define DRM_I915_FLIP		0x02
+#define DRM_I915_BATCHBUFFER	0x03
+#define DRM_I915_IRQ_EMIT	0x04
+#define DRM_I915_IRQ_WAIT	0x05
+#define DRM_I915_GETPARAM	0x06
+#define DRM_I915_SETPARAM	0x07
+#define DRM_I915_ALLOC		0x08
+#define DRM_I915_FREE		0x09
+#define DRM_I915_INIT_HEAP	0x0a
+#define DRM_I915_CMDBUFFER	0x0b
+#define DRM_I915_DESTROY_HEAP	0x0c
+#define DRM_I915_SET_VBLANK_PIPE	0x0d
+#define DRM_I915_GET_VBLANK_PIPE	0x0e
+#define DRM_I915_VBLANK_SWAP	0x0f
+#define DRM_I915_HWS_ADDR	0x11
+#define DRM_I915_GEM_INIT	0x13
+#define DRM_I915_GEM_EXECBUFFER	0x14
+#define DRM_I915_GEM_PIN	0x15
+#define DRM_I915_GEM_UNPIN	0x16
+#define DRM_I915_GEM_BUSY	0x17
+#define DRM_I915_GEM_THROTTLE	0x18
+#define DRM_I915_GEM_ENTERVT	0x19
+#define DRM_I915_GEM_LEAVEVT	0x1a
+#define DRM_I915_GEM_CREATE	0x1b
+#define DRM_I915_GEM_PREAD	0x1c
+#define DRM_I915_GEM_PWRITE	0x1d
+#define DRM_I915_GEM_MMAP	0x1e
+#define DRM_I915_GEM_SET_DOMAIN	0x1f
+#define DRM_I915_GEM_SW_FINISH	0x20
+#define DRM_I915_GEM_SET_TILING	0x21
+#define DRM_I915_GEM_GET_TILING	0x22
+#define DRM_I915_GEM_GET_APERTURE 0x23
+#define DRM_I915_GEM_MMAP_GTT	0x24
+#define DRM_I915_GET_PIPE_FROM_CRTC_ID	0x25
+#define DRM_I915_GEM_MADVISE	0x26
+#define DRM_I915_OVERLAY_PUT_IMAGE	0x27
+#define DRM_I915_OVERLAY_ATTRS	0x28
+#define DRM_I915_GEM_EXECBUFFER2	0x29
+#define DRM_I915_GEM_EXECBUFFER2_WR	DRM_I915_GEM_EXECBUFFER2
+#define DRM_I915_GET_SPRITE_COLORKEY	0x2a
+#define DRM_I915_SET_SPRITE_COLORKEY	0x2b
+#define DRM_I915_GEM_WAIT	0x2c
+#define DRM_I915_GEM_CONTEXT_CREATE	0x2d
+#define DRM_I915_GEM_CONTEXT_DESTROY	0x2e
+#define DRM_I915_GEM_SET_CACHING	0x2f
+#define DRM_I915_GEM_GET_CACHING	0x30
+#define DRM_I915_REG_READ		0x31
+#define DRM_I915_GET_RESET_STATS	0x32
+#define DRM_I915_GEM_USERPTR		0x33
+#define DRM_I915_GEM_CONTEXT_GETPARAM	0x34
+#define DRM_I915_GEM_CONTEXT_SETPARAM	0x35
+#define DRM_I915_PERF_OPEN		0x36
+#define DRM_I915_PERF_ADD_CONFIG	0x37
+#define DRM_I915_PERF_REMOVE_CONFIG	0x38
+#define DRM_I915_QUERY			0x39
+
+#define DRM_IOCTL_I915_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
+#define DRM_IOCTL_I915_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
+#define DRM_IOCTL_I915_FLIP		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLIP)
+#define DRM_IOCTL_I915_BATCHBUFFER	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_BATCHBUFFER, drm_i915_batchbuffer_t)
+#define DRM_IOCTL_I915_IRQ_EMIT         DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_IRQ_EMIT, drm_i915_irq_emit_t)
+#define DRM_IOCTL_I915_IRQ_WAIT         DRM_IOW( DRM_COMMAND_BASE + DRM_I915_IRQ_WAIT, drm_i915_irq_wait_t)
+#define DRM_IOCTL_I915_GETPARAM         DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GETPARAM, drm_i915_getparam_t)
+#define DRM_IOCTL_I915_SETPARAM         DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SETPARAM, drm_i915_setparam_t)
+#define DRM_IOCTL_I915_ALLOC            DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_ALLOC, drm_i915_mem_alloc_t)
+#define DRM_IOCTL_I915_FREE             DRM_IOW( DRM_COMMAND_BASE + DRM_I915_FREE, drm_i915_mem_free_t)
+#define DRM_IOCTL_I915_INIT_HEAP        DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT_HEAP, drm_i915_mem_init_heap_t)
+#define DRM_IOCTL_I915_CMDBUFFER	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_CMDBUFFER, drm_i915_cmdbuffer_t)
+#define DRM_IOCTL_I915_DESTROY_HEAP	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_DESTROY_HEAP, drm_i915_mem_destroy_heap_t)
+#define DRM_IOCTL_I915_SET_VBLANK_PIPE	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
+#define DRM_IOCTL_I915_GET_VBLANK_PIPE	DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
+#define DRM_IOCTL_I915_VBLANK_SWAP	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
+#define DRM_IOCTL_I915_HWS_ADDR		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_HWS_ADDR, struct drm_i915_gem_init)
+#define DRM_IOCTL_I915_GEM_INIT		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER2	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER2_WR	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2_WR, struct drm_i915_gem_execbuffer2)
+#define DRM_IOCTL_I915_GEM_PIN		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin)
+#define DRM_IOCTL_I915_GEM_UNPIN	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin)
+#define DRM_IOCTL_I915_GEM_BUSY		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy)
+#define DRM_IOCTL_I915_GEM_SET_CACHING		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_SET_CACHING, struct drm_i915_gem_caching)
+#define DRM_IOCTL_I915_GEM_GET_CACHING		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_GET_CACHING, struct drm_i915_gem_caching)
+#define DRM_IOCTL_I915_GEM_THROTTLE	DRM_IO ( DRM_COMMAND_BASE + DRM_I915_GEM_THROTTLE)
+#define DRM_IOCTL_I915_GEM_ENTERVT	DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT)
+#define DRM_IOCTL_I915_GEM_LEAVEVT	DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT)
+#define DRM_IOCTL_I915_GEM_CREATE	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE, struct drm_i915_gem_create)
+#define DRM_IOCTL_I915_GEM_PREAD	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PREAD, struct drm_i915_gem_pread)
+#define DRM_IOCTL_I915_GEM_PWRITE	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PWRITE, struct drm_i915_gem_pwrite)
+#define DRM_IOCTL_I915_GEM_MMAP		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP, struct drm_i915_gem_mmap)
+#define DRM_IOCTL_I915_GEM_MMAP_GTT	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP_GTT, struct drm_i915_gem_mmap_gtt)
+#define DRM_IOCTL_I915_GEM_SET_DOMAIN	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SET_DOMAIN, struct drm_i915_gem_set_domain)
+#define DRM_IOCTL_I915_GEM_SW_FINISH	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SW_FINISH, struct drm_i915_gem_sw_finish)
+#define DRM_IOCTL_I915_GEM_SET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling)
+#define DRM_IOCTL_I915_GEM_GET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
+#define DRM_IOCTL_I915_GEM_GET_APERTURE	DRM_IOR  (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
+#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_i915_get_pipe_from_crtc_id)
+#define DRM_IOCTL_I915_GEM_MADVISE	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MADVISE, struct drm_i915_gem_madvise)
+#define DRM_IOCTL_I915_OVERLAY_PUT_IMAGE	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_OVERLAY_PUT_IMAGE, struct drm_intel_overlay_put_image)
+#define DRM_IOCTL_I915_OVERLAY_ATTRS	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_OVERLAY_ATTRS, struct drm_intel_overlay_attrs)
+#define DRM_IOCTL_I915_SET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_SET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey)
+#define DRM_IOCTL_I915_GET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey)
+#define DRM_IOCTL_I915_GEM_WAIT		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_WAIT, struct drm_i915_gem_wait)
+#define DRM_IOCTL_I915_GEM_CONTEXT_CREATE	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_CREATE, struct drm_i915_gem_context_create)
+#define DRM_IOCTL_I915_GEM_CONTEXT_DESTROY	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_DESTROY, struct drm_i915_gem_context_destroy)
+#define DRM_IOCTL_I915_REG_READ			DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_REG_READ, struct drm_i915_reg_read)
+#define DRM_IOCTL_I915_GET_RESET_STATS		DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GET_RESET_STATS, struct drm_i915_reset_stats)
+#define DRM_IOCTL_I915_GEM_USERPTR			DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_USERPTR, struct drm_i915_gem_userptr)
+#define DRM_IOCTL_I915_GEM_CONTEXT_GETPARAM	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_GETPARAM, struct drm_i915_gem_context_param)
+#define DRM_IOCTL_I915_GEM_CONTEXT_SETPARAM	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_SETPARAM, struct drm_i915_gem_context_param)
+#define DRM_IOCTL_I915_PERF_OPEN	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_OPEN, struct drm_i915_perf_open_param)
+#define DRM_IOCTL_I915_PERF_ADD_CONFIG	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_ADD_CONFIG, struct drm_i915_perf_oa_config)
+#define DRM_IOCTL_I915_PERF_REMOVE_CONFIG	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_REMOVE_CONFIG, __u64)
+#define DRM_IOCTL_I915_QUERY			DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_QUERY, struct drm_i915_query)
+
+/* Allow drivers to submit batchbuffers directly to hardware, relying
+ * on the security mechanisms provided by hardware.
+ */
+typedef struct drm_i915_batchbuffer {
+	int start;		/* agp offset */
+	int used;		/* nr bytes in use */
+	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */
+	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */
+	int num_cliprects;	/* mulitpass with multiple cliprects? */
+	struct drm_clip_rect __user *cliprects;	/* pointer to userspace cliprects */
+} drm_i915_batchbuffer_t;
+
+/* As above, but pass a pointer to userspace buffer which can be
+ * validated by the kernel prior to sending to hardware.
+ */
+typedef struct _drm_i915_cmdbuffer {
+	char __user *buf;	/* pointer to userspace command buffer */
+	int sz;			/* nr bytes in buf */
+	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */
+	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */
+	int num_cliprects;	/* mulitpass with multiple cliprects? */
+	struct drm_clip_rect __user *cliprects;	/* pointer to userspace cliprects */
+} drm_i915_cmdbuffer_t;
+
+/* Userspace can request & wait on irq's:
+ */
+typedef struct drm_i915_irq_emit {
+	int __user *irq_seq;
+} drm_i915_irq_emit_t;
+
+typedef struct drm_i915_irq_wait {
+	int irq_seq;
+} drm_i915_irq_wait_t;
+
+/* Ioctl to query kernel params:
+ */
+#define I915_PARAM_IRQ_ACTIVE            1
+#define I915_PARAM_ALLOW_BATCHBUFFER     2
+#define I915_PARAM_LAST_DISPATCH         3
+#define I915_PARAM_CHIPSET_ID            4
+#define I915_PARAM_HAS_GEM               5
+#define I915_PARAM_NUM_FENCES_AVAIL      6
+#define I915_PARAM_HAS_OVERLAY           7
+#define I915_PARAM_HAS_PAGEFLIPPING	 8
+#define I915_PARAM_HAS_EXECBUF2          9
+#define I915_PARAM_HAS_BSD		 10
+#define I915_PARAM_HAS_BLT		 11
+#define I915_PARAM_HAS_RELAXED_FENCING	 12
+#define I915_PARAM_HAS_COHERENT_RINGS	 13
+#define I915_PARAM_HAS_EXEC_CONSTANTS	 14
+#define I915_PARAM_HAS_RELAXED_DELTA	 15
+#define I915_PARAM_HAS_GEN7_SOL_RESET	 16
+#define I915_PARAM_HAS_LLC     	 	 17
+#define I915_PARAM_HAS_ALIASING_PPGTT	 18
+#define I915_PARAM_HAS_WAIT_TIMEOUT	 19
+#define I915_PARAM_HAS_SEMAPHORES	 20
+#define I915_PARAM_HAS_PRIME_VMAP_FLUSH	 21
+#define I915_PARAM_HAS_VEBOX		 22
+#define I915_PARAM_HAS_SECURE_BATCHES	 23
+#define I915_PARAM_HAS_PINNED_BATCHES	 24
+#define I915_PARAM_HAS_EXEC_NO_RELOC	 25
+#define I915_PARAM_HAS_EXEC_HANDLE_LUT   26
+#define I915_PARAM_HAS_WT     	 	 27
+#define I915_PARAM_CMD_PARSER_VERSION	 28
+#define I915_PARAM_HAS_COHERENT_PHYS_GTT 29
+#define I915_PARAM_MMAP_VERSION          30
+#define I915_PARAM_HAS_BSD2		 31
+#define I915_PARAM_REVISION              32
+#define I915_PARAM_SUBSLICE_TOTAL	 33
+#define I915_PARAM_EU_TOTAL		 34
+#define I915_PARAM_HAS_GPU_RESET	 35
+#define I915_PARAM_HAS_RESOURCE_STREAMER 36
+#define I915_PARAM_HAS_EXEC_SOFTPIN	 37
+#define I915_PARAM_HAS_POOLED_EU	 38
+#define I915_PARAM_MIN_EU_IN_POOL	 39
+#define I915_PARAM_MMAP_GTT_VERSION	 40
+
+/*
+ * Query whether DRM_I915_GEM_EXECBUFFER2 supports user defined execution
+ * priorities and the driver will attempt to execute batches in priority order.
+ * The param returns a capability bitmask, nonzero implies that the scheduler
+ * is enabled, with different features present according to the mask.
+ *
+ * The initial priority for each batch is supplied by the context and is
+ * controlled via I915_CONTEXT_PARAM_PRIORITY.
+ */
+#define I915_PARAM_HAS_SCHEDULER	 41
+#define   I915_SCHEDULER_CAP_ENABLED	(1ul << 0)
+#define   I915_SCHEDULER_CAP_PRIORITY	(1ul << 1)
+#define   I915_SCHEDULER_CAP_PREEMPTION	(1ul << 2)
+
+#define I915_PARAM_HUC_STATUS		 42
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports the ability to opt-out of
+ * synchronisation with implicit fencing on individual objects.
+ * See EXEC_OBJECT_ASYNC.
+ */
+#define I915_PARAM_HAS_EXEC_ASYNC	 43
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports explicit fence support -
+ * both being able to pass in a sync_file fd to wait upon before executing,
+ * and being able to return a new sync_file fd that is signaled when the
+ * current request is complete. See I915_EXEC_FENCE_IN and I915_EXEC_FENCE_OUT.
+ */
+#define I915_PARAM_HAS_EXEC_FENCE	 44
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports the ability to capture
+ * user specified bufffers for post-mortem debugging of GPU hangs. See
+ * EXEC_OBJECT_CAPTURE.
+ */
+#define I915_PARAM_HAS_EXEC_CAPTURE	 45
+
+#define I915_PARAM_SLICE_MASK		 46
+
+/* Assuming it's uniform for each slice, this queries the mask of subslices
+ * per-slice for this system.
+ */
+#define I915_PARAM_SUBSLICE_MASK	 47
+
+/*
+ * Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying the batch buffer
+ * as the first execobject as opposed to the last. See I915_EXEC_BATCH_FIRST.
+ */
+#define I915_PARAM_HAS_EXEC_BATCH_FIRST	 48
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying an array of
+ * drm_i915_gem_exec_fence structures.  See I915_EXEC_FENCE_ARRAY.
+ */
+#define I915_PARAM_HAS_EXEC_FENCE_ARRAY  49
+
+/*
+ * Query whether every context (both per-file default and user created) is
+ * isolated (insofar as HW supports). If this parameter is not true, then
+ * freshly created contexts may inherit values from an existing context,
+ * rather than default HW values. If true, it also ensures (insofar as HW
+ * supports) that all state set by this context will not leak to any other
+ * context.
+ *
+ * As not every engine across every gen support contexts, the returned
+ * value reports the support of context isolation for individual engines by
+ * returning a bitmask of each engine class set to true if that class supports
+ * isolation.
+ */
+#define I915_PARAM_HAS_CONTEXT_ISOLATION 50
+
+/* Frequency of the command streamer timestamps given by the *_TIMESTAMP
+ * registers. This used to be fixed per platform but from CNL onwards, this
+ * might vary depending on the parts.
+ */
+#define I915_PARAM_CS_TIMESTAMP_FREQUENCY 51
+
+typedef struct drm_i915_getparam {
+	__s32 param;
+	/*
+	 * WARNING: Using pointers instead of fixed-size u64 means we need to write
+	 * compat32 code. Don't repeat this mistake.
+	 */
+	int __user *value;
+} drm_i915_getparam_t;
+
+/* Ioctl to set kernel params:
+ */
+#define I915_SETPARAM_USE_MI_BATCHBUFFER_START            1
+#define I915_SETPARAM_TEX_LRU_LOG_GRANULARITY             2
+#define I915_SETPARAM_ALLOW_BATCHBUFFER                   3
+#define I915_SETPARAM_NUM_USED_FENCES                     4
+
+typedef struct drm_i915_setparam {
+	int param;
+	int value;
+} drm_i915_setparam_t;
+
+/* A memory manager for regions of shared memory:
+ */
+#define I915_MEM_REGION_AGP 1
+
+typedef struct drm_i915_mem_alloc {
+	int region;
+	int alignment;
+	int size;
+	int __user *region_offset;	/* offset from start of fb or agp */
+} drm_i915_mem_alloc_t;
+
+typedef struct drm_i915_mem_free {
+	int region;
+	int region_offset;
+} drm_i915_mem_free_t;
+
+typedef struct drm_i915_mem_init_heap {
+	int region;
+	int size;
+	int start;
+} drm_i915_mem_init_heap_t;
+
+/* Allow memory manager to be torn down and re-initialized (eg on
+ * rotate):
+ */
+typedef struct drm_i915_mem_destroy_heap {
+	int region;
+} drm_i915_mem_destroy_heap_t;
+
+/* Allow X server to configure which pipes to monitor for vblank signals
+ */
+#define	DRM_I915_VBLANK_PIPE_A	1
+#define	DRM_I915_VBLANK_PIPE_B	2
+
+typedef struct drm_i915_vblank_pipe {
+	int pipe;
+} drm_i915_vblank_pipe_t;
+
+/* Schedule buffer swap at given vertical blank:
+ */
+typedef struct drm_i915_vblank_swap {
+	drm_drawable_t drawable;
+	enum drm_vblank_seq_type seqtype;
+	unsigned int sequence;
+} drm_i915_vblank_swap_t;
+
+typedef struct drm_i915_hws_addr {
+	__u64 addr;
+} drm_i915_hws_addr_t;
+
+struct drm_i915_gem_init {
+	/**
+	 * Beginning offset in the GTT to be managed by the DRM memory
+	 * manager.
+	 */
+	__u64 gtt_start;
+	/**
+	 * Ending offset in the GTT to be managed by the DRM memory
+	 * manager.
+	 */
+	__u64 gtt_end;
+};
+
+struct drm_i915_gem_create {
+	/**
+	 * Requested size for the object.
+	 *
+	 * The (page-aligned) allocated size for the object will be returned.
+	 */
+	__u64 size;
+	/**
+	 * Returned handle for the object.
+	 *
+	 * Object handles are nonzero.
+	 */
+	__u32 handle;
+	__u32 pad;
+};
+
+struct drm_i915_gem_pread {
+	/** Handle for the object being read. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset into the object to read from */
+	__u64 offset;
+	/** Length of data to read */
+	__u64 size;
+	/**
+	 * Pointer to write the data into.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 data_ptr;
+};
+
+struct drm_i915_gem_pwrite {
+	/** Handle for the object being written to. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset into the object to write to */
+	__u64 offset;
+	/** Length of data to write */
+	__u64 size;
+	/**
+	 * Pointer to read the data from.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 data_ptr;
+};
+
+struct drm_i915_gem_mmap {
+	/** Handle for the object being mapped. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset in the object to map. */
+	__u64 offset;
+	/**
+	 * Length of data to map.
+	 *
+	 * The value will be page-aligned.
+	 */
+	__u64 size;
+	/**
+	 * Returned pointer the data was mapped at.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 addr_ptr;
+
+	/**
+	 * Flags for extended behaviour.
+	 *
+	 * Added in version 2.
+	 */
+	__u64 flags;
+#define I915_MMAP_WC 0x1
+};
+
+struct drm_i915_gem_mmap_gtt {
+	/** Handle for the object being mapped. */
+	__u32 handle;
+	__u32 pad;
+	/**
+	 * Fake offset to use for subsequent mmap call
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 offset;
+};
+
+struct drm_i915_gem_set_domain {
+	/** Handle for the object */
+	__u32 handle;
+
+	/** New read domains */
+	__u32 read_domains;
+
+	/** New write domain */
+	__u32 write_domain;
+};
+
+struct drm_i915_gem_sw_finish {
+	/** Handle for the object */
+	__u32 handle;
+};
+
+struct drm_i915_gem_relocation_entry {
+	/**
+	 * Handle of the buffer being pointed to by this relocation entry.
+	 *
+	 * It's appealing to make this be an index into the mm_validate_entry
+	 * list to refer to the buffer, but this allows the driver to create
+	 * a relocation list for state buffers and not re-write it per
+	 * exec using the buffer.
+	 */
+	__u32 target_handle;
+
+	/**
+	 * Value to be added to the offset of the target buffer to make up
+	 * the relocation entry.
+	 */
+	__u32 delta;
+
+	/** Offset in the buffer the relocation entry will be written into */
+	__u64 offset;
+
+	/**
+	 * Offset value of the target buffer that the relocation entry was last
+	 * written as.
+	 *
+	 * If the buffer has the same offset as last time, we can skip syncing
+	 * and writing the relocation.  This value is written back out by
+	 * the execbuffer ioctl when the relocation is written.
+	 */
+	__u64 presumed_offset;
+
+	/**
+	 * Target memory domains read by this operation.
+	 */
+	__u32 read_domains;
+
+	/**
+	 * Target memory domains written by this operation.
+	 *
+	 * Note that only one domain may be written by the whole
+	 * execbuffer operation, so that where there are conflicts,
+	 * the application will get -EINVAL back.
+	 */
+	__u32 write_domain;
+};
+
+/** @{
+ * Intel memory domains
+ *
+ * Most of these just align with the various caches in
+ * the system and are used to flush and invalidate as
+ * objects end up cached in different domains.
+ */
+/** CPU cache */
+#define I915_GEM_DOMAIN_CPU		0x00000001
+/** Render cache, used by 2D and 3D drawing */
+#define I915_GEM_DOMAIN_RENDER		0x00000002
+/** Sampler cache, used by texture engine */
+#define I915_GEM_DOMAIN_SAMPLER		0x00000004
+/** Command queue, used to load batch buffers */
+#define I915_GEM_DOMAIN_COMMAND		0x00000008
+/** Instruction cache, used by shader programs */
+#define I915_GEM_DOMAIN_INSTRUCTION	0x00000010
+/** Vertex address cache */
+#define I915_GEM_DOMAIN_VERTEX		0x00000020
+/** GTT domain - aperture and scanout */
+#define I915_GEM_DOMAIN_GTT		0x00000040
+/** WC domain - uncached access */
+#define I915_GEM_DOMAIN_WC		0x00000080
+/** @} */
+
+struct drm_i915_gem_exec_object {
+	/**
+	 * User's handle for a buffer to be bound into the GTT for this
+	 * operation.
+	 */
+	__u32 handle;
+
+	/** Number of relocations to be performed on this buffer */
+	__u32 relocation_count;
+	/**
+	 * Pointer to array of struct drm_i915_gem_relocation_entry containing
+	 * the relocations to be performed in this buffer.
+	 */
+	__u64 relocs_ptr;
+
+	/** Required alignment in graphics aperture */
+	__u64 alignment;
+
+	/**
+	 * Returned value of the updated offset of the object, for future
+	 * presumed_offset writes.
+	 */
+	__u64 offset;
+};
+
+struct drm_i915_gem_execbuffer {
+	/**
+	 * List of buffers to be validated with their relocations to be
+	 * performend on them.
+	 *
+	 * This is a pointer to an array of struct drm_i915_gem_validate_entry.
+	 *
+	 * These buffers must be listed in an order such that all relocations
+	 * a buffer is performing refer to buffers that have already appeared
+	 * in the validate list.
+	 */
+	__u64 buffers_ptr;
+	__u32 buffer_count;
+
+	/** Offset in the batchbuffer to start execution from. */
+	__u32 batch_start_offset;
+	/** Bytes used in batchbuffer from batch_start_offset */
+	__u32 batch_len;
+	__u32 DR1;
+	__u32 DR4;
+	__u32 num_cliprects;
+	/** This is a struct drm_clip_rect *cliprects */
+	__u64 cliprects_ptr;
+};
+
+struct drm_i915_gem_exec_object2 {
+	/**
+	 * User's handle for a buffer to be bound into the GTT for this
+	 * operation.
+	 */
+	__u32 handle;
+
+	/** Number of relocations to be performed on this buffer */
+	__u32 relocation_count;
+	/**
+	 * Pointer to array of struct drm_i915_gem_relocation_entry containing
+	 * the relocations to be performed in this buffer.
+	 */
+	__u64 relocs_ptr;
+
+	/** Required alignment in graphics aperture */
+	__u64 alignment;
+
+	/**
+	 * When the EXEC_OBJECT_PINNED flag is specified this is populated by
+	 * the user with the GTT offset at which this object will be pinned.
+	 * When the I915_EXEC_NO_RELOC flag is specified this must contain the
+	 * presumed_offset of the object.
+	 * During execbuffer2 the kernel populates it with the value of the
+	 * current GTT offset of the object, for future presumed_offset writes.
+	 */
+	__u64 offset;
+
+#define EXEC_OBJECT_NEEDS_FENCE		 (1<<0)
+#define EXEC_OBJECT_NEEDS_GTT		 (1<<1)
+#define EXEC_OBJECT_WRITE		 (1<<2)
+#define EXEC_OBJECT_SUPPORTS_48B_ADDRESS (1<<3)
+#define EXEC_OBJECT_PINNED		 (1<<4)
+#define EXEC_OBJECT_PAD_TO_SIZE		 (1<<5)
+/* The kernel implicitly tracks GPU activity on all GEM objects, and
+ * synchronises operations with outstanding rendering. This includes
+ * rendering on other devices if exported via dma-buf. However, sometimes
+ * this tracking is too coarse and the user knows better. For example,
+ * if the object is split into non-overlapping ranges shared between different
+ * clients or engines (i.e. suballocating objects), the implicit tracking
+ * by kernel assumes that each operation affects the whole object rather
+ * than an individual range, causing needless synchronisation between clients.
+ * The kernel will also forgo any CPU cache flushes prior to rendering from
+ * the object as the client is expected to be also handling such domain
+ * tracking.
+ *
+ * The kernel maintains the implicit tracking in order to manage resources
+ * used by the GPU - this flag only disables the synchronisation prior to
+ * rendering with this object in this execbuf.
+ *
+ * Opting out of implicit synhronisation requires the user to do its own
+ * explicit tracking to avoid rendering corruption. See, for example,
+ * I915_PARAM_HAS_EXEC_FENCE to order execbufs and execute them asynchronously.
+ */
+#define EXEC_OBJECT_ASYNC		(1<<6)
+/* Request that the contents of this execobject be copied into the error
+ * state upon a GPU hang involving this batch for post-mortem debugging.
+ * These buffers are recorded in no particular order as "user" in
+ * /sys/class/drm/cardN/error. Query I915_PARAM_HAS_EXEC_CAPTURE to see
+ * if the kernel supports this flag.
+ */
+#define EXEC_OBJECT_CAPTURE		(1<<7)
+/* All remaining bits are MBZ and RESERVED FOR FUTURE USE */
+#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_CAPTURE<<1)
+	__u64 flags;
+
+	union {
+		__u64 rsvd1;
+		__u64 pad_to_size;
+	};
+	__u64 rsvd2;
+};
+
+struct drm_i915_gem_exec_fence {
+	/**
+	 * User's handle for a drm_syncobj to wait on or signal.
+	 */
+	__u32 handle;
+
+#define I915_EXEC_FENCE_WAIT            (1<<0)
+#define I915_EXEC_FENCE_SIGNAL          (1<<1)
+#define __I915_EXEC_FENCE_UNKNOWN_FLAGS (-(I915_EXEC_FENCE_SIGNAL << 1))
+	__u32 flags;
+};
+
+struct drm_i915_gem_execbuffer2 {
+	/**
+	 * List of gem_exec_object2 structs
+	 */
+	__u64 buffers_ptr;
+	__u32 buffer_count;
+
+	/** Offset in the batchbuffer to start execution from. */
+	__u32 batch_start_offset;
+	/** Bytes used in batchbuffer from batch_start_offset */
+	__u32 batch_len;
+	__u32 DR1;
+	__u32 DR4;
+	__u32 num_cliprects;
+	/**
+	 * This is a struct drm_clip_rect *cliprects if I915_EXEC_FENCE_ARRAY
+	 * is not set.  If I915_EXEC_FENCE_ARRAY is set, then this is a
+	 * struct drm_i915_gem_exec_fence *fences.
+	 */
+	__u64 cliprects_ptr;
+#define I915_EXEC_RING_MASK              (7<<0)
+#define I915_EXEC_DEFAULT                (0<<0)
+#define I915_EXEC_RENDER                 (1<<0)
+#define I915_EXEC_BSD                    (2<<0)
+#define I915_EXEC_BLT                    (3<<0)
+#define I915_EXEC_VEBOX                  (4<<0)
+
+/* Used for switching the constants addressing mode on gen4+ RENDER ring.
+ * Gen6+ only supports relative addressing to dynamic state (default) and
+ * absolute addressing.
+ *
+ * These flags are ignored for the BSD and BLT rings.
+ */
+#define I915_EXEC_CONSTANTS_MASK 	(3<<6)
+#define I915_EXEC_CONSTANTS_REL_GENERAL (0<<6) /* default */
+#define I915_EXEC_CONSTANTS_ABSOLUTE 	(1<<6)
+#define I915_EXEC_CONSTANTS_REL_SURFACE (2<<6) /* gen4/5 only */
+	__u64 flags;
+	__u64 rsvd1; /* now used for context info */
+	__u64 rsvd2;
+};
+
+/** Resets the SO write offset registers for transform feedback on gen7. */
+#define I915_EXEC_GEN7_SOL_RESET	(1<<8)
+
+/** Request a privileged ("secure") batch buffer. Note only available for
+ * DRM_ROOT_ONLY | DRM_MASTER processes.
+ */
+#define I915_EXEC_SECURE		(1<<9)
+
+/** Inform the kernel that the batch is and will always be pinned. This
+ * negates the requirement for a workaround to be performed to avoid
+ * an incoherent CS (such as can be found on 830/845). If this flag is
+ * not passed, the kernel will endeavour to make sure the batch is
+ * coherent with the CS before execution. If this flag is passed,
+ * userspace assumes the responsibility for ensuring the same.
+ */
+#define I915_EXEC_IS_PINNED		(1<<10)
+
+/** Provide a hint to the kernel that the command stream and auxiliary
+ * state buffers already holds the correct presumed addresses and so the
+ * relocation process may be skipped if no buffers need to be moved in
+ * preparation for the execbuffer.
+ */
+#define I915_EXEC_NO_RELOC		(1<<11)
+
+/** Use the reloc.handle as an index into the exec object array rather
+ * than as the per-file handle.
+ */
+#define I915_EXEC_HANDLE_LUT		(1<<12)
+
+/** Used for switching BSD rings on the platforms with two BSD rings */
+#define I915_EXEC_BSD_SHIFT	 (13)
+#define I915_EXEC_BSD_MASK	 (3 << I915_EXEC_BSD_SHIFT)
+/* default ping-pong mode */
+#define I915_EXEC_BSD_DEFAULT	 (0 << I915_EXEC_BSD_SHIFT)
+#define I915_EXEC_BSD_RING1	 (1 << I915_EXEC_BSD_SHIFT)
+#define I915_EXEC_BSD_RING2	 (2 << I915_EXEC_BSD_SHIFT)
+
+/** Tell the kernel that the batchbuffer is processed by
+ *  the resource streamer.
+ */
+#define I915_EXEC_RESOURCE_STREAMER     (1<<15)
+
+/* Setting I915_EXEC_FENCE_IN implies that lower_32_bits(rsvd2) represent
+ * a sync_file fd to wait upon (in a nonblocking manner) prior to executing
+ * the batch.
+ *
+ * Returns -EINVAL if the sync_file fd cannot be found.
+ */
+#define I915_EXEC_FENCE_IN		(1<<16)
+
+/* Setting I915_EXEC_FENCE_OUT causes the ioctl to return a sync_file fd
+ * in the upper_32_bits(rsvd2) upon success. Ownership of the fd is given
+ * to the caller, and it should be close() after use. (The fd is a regular
+ * file descriptor and will be cleaned up on process termination. It holds
+ * a reference to the request, but nothing else.)
+ *
+ * The sync_file fd can be combined with other sync_file and passed either
+ * to execbuf using I915_EXEC_FENCE_IN, to atomic KMS ioctls (so that a flip
+ * will only occur after this request completes), or to other devices.
+ *
+ * Using I915_EXEC_FENCE_OUT requires use of
+ * DRM_IOCTL_I915_GEM_EXECBUFFER2_WR ioctl so that the result is written
+ * back to userspace. Failure to do so will cause the out-fence to always
+ * be reported as zero, and the real fence fd to be leaked.
+ */
+#define I915_EXEC_FENCE_OUT		(1<<17)
+
+/*
+ * Traditionally the execbuf ioctl has only considered the final element in
+ * the execobject[] to be the executable batch. Often though, the client
+ * will known the batch object prior to construction and being able to place
+ * it into the execobject[] array first can simplify the relocation tracking.
+ * Setting I915_EXEC_BATCH_FIRST tells execbuf to use element 0 of the
+ * execobject[] as the * batch instead (the default is to use the last
+ * element).
+ */
+#define I915_EXEC_BATCH_FIRST		(1<<18)
+
+/* Setting I915_FENCE_ARRAY implies that num_cliprects and cliprects_ptr
+ * define an array of i915_gem_exec_fence structures which specify a set of
+ * dma fences to wait upon or signal.
+ */
+#define I915_EXEC_FENCE_ARRAY   (1<<19)
+
+#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_FENCE_ARRAY<<1))
+
+#define I915_EXEC_CONTEXT_ID_MASK	(0xffffffff)
+#define i915_execbuffer2_set_context_id(eb2, context) \
+	(eb2).rsvd1 = context & I915_EXEC_CONTEXT_ID_MASK
+#define i915_execbuffer2_get_context_id(eb2) \
+	((eb2).rsvd1 & I915_EXEC_CONTEXT_ID_MASK)
+
+struct drm_i915_gem_pin {
+	/** Handle of the buffer to be pinned. */
+	__u32 handle;
+	__u32 pad;
+
+	/** alignment required within the aperture */
+	__u64 alignment;
+
+	/** Returned GTT offset of the buffer. */
+	__u64 offset;
+};
+
+struct drm_i915_gem_unpin {
+	/** Handle of the buffer to be unpinned. */
+	__u32 handle;
+	__u32 pad;
+};
+
+struct drm_i915_gem_busy {
+	/** Handle of the buffer to check for busy */
+	__u32 handle;
+
+	/** Return busy status
+	 *
+	 * A return of 0 implies that the object is idle (after
+	 * having flushed any pending activity), and a non-zero return that
+	 * the object is still in-flight on the GPU. (The GPU has not yet
+	 * signaled completion for all pending requests that reference the
+	 * object.) An object is guaranteed to become idle eventually (so
+	 * long as no new GPU commands are executed upon it). Due to the
+	 * asynchronous nature of the hardware, an object reported
+	 * as busy may become idle before the ioctl is completed.
+	 *
+	 * Furthermore, if the object is busy, which engine is busy is only
+	 * provided as a guide. There are race conditions which prevent the
+	 * report of which engines are busy from being always accurate.
+	 * However, the converse is not true. If the object is idle, the
+	 * result of the ioctl, that all engines are idle, is accurate.
+	 *
+	 * The returned dword is split into two fields to indicate both
+	 * the engines on which the object is being read, and the
+	 * engine on which it is currently being written (if any).
+	 *
+	 * The low word (bits 0:15) indicate if the object is being written
+	 * to by any engine (there can only be one, as the GEM implicit
+	 * synchronisation rules force writes to be serialised). Only the
+	 * engine for the last write is reported.
+	 *
+	 * The high word (bits 16:31) are a bitmask of which engines are
+	 * currently reading from the object. Multiple engines may be
+	 * reading from the object simultaneously.
+	 *
+	 * The value of each engine is the same as specified in the
+	 * EXECBUFFER2 ioctl, i.e. I915_EXEC_RENDER, I915_EXEC_BSD etc.
+	 * Note I915_EXEC_DEFAULT is a symbolic value and is mapped to
+	 * the I915_EXEC_RENDER engine for execution, and so it is never
+	 * reported as active itself. Some hardware may have parallel
+	 * execution engines, e.g. multiple media engines, which are
+	 * mapped to the same identifier in the EXECBUFFER2 ioctl and
+	 * so are not separately reported for busyness.
+	 *
+	 * Caveat emptor:
+	 * Only the boolean result of this query is reliable; that is whether
+	 * the object is idle or busy. The report of which engines are busy
+	 * should be only used as a heuristic.
+	 */
+	__u32 busy;
+};
+
+/**
+ * I915_CACHING_NONE
+ *
+ * GPU access is not coherent with cpu caches. Default for machines without an
+ * LLC.
+ */
+#define I915_CACHING_NONE		0
+/**
+ * I915_CACHING_CACHED
+ *
+ * GPU access is coherent with cpu caches and furthermore the data is cached in
+ * last-level caches shared between cpu cores and the gpu GT. Default on
+ * machines with HAS_LLC.
+ */
+#define I915_CACHING_CACHED		1
+/**
+ * I915_CACHING_DISPLAY
+ *
+ * Special GPU caching mode which is coherent with the scanout engines.
+ * Transparently falls back to I915_CACHING_NONE on platforms where no special
+ * cache mode (like write-through or gfdt flushing) is available. The kernel
+ * automatically sets this mode when using a buffer as a scanout target.
+ * Userspace can manually set this mode to avoid a costly stall and clflush in
+ * the hotpath of drawing the first frame.
+ */
+#define I915_CACHING_DISPLAY		2
+
+struct drm_i915_gem_caching {
+	/**
+	 * Handle of the buffer to set/get the caching level of. */
+	__u32 handle;
+
+	/**
+	 * Cacheing level to apply or return value
+	 *
+	 * bits0-15 are for generic caching control (i.e. the above defined
+	 * values). bits16-31 are reserved for platform-specific variations
+	 * (e.g. l3$ caching on gen7). */
+	__u32 caching;
+};
+
+#define I915_TILING_NONE	0
+#define I915_TILING_X		1
+#define I915_TILING_Y		2
+#define I915_TILING_LAST	I915_TILING_Y
+
+#define I915_BIT_6_SWIZZLE_NONE		0
+#define I915_BIT_6_SWIZZLE_9		1
+#define I915_BIT_6_SWIZZLE_9_10		2
+#define I915_BIT_6_SWIZZLE_9_11		3
+#define I915_BIT_6_SWIZZLE_9_10_11	4
+/* Not seen by userland */
+#define I915_BIT_6_SWIZZLE_UNKNOWN	5
+/* Seen by userland. */
+#define I915_BIT_6_SWIZZLE_9_17		6
+#define I915_BIT_6_SWIZZLE_9_10_17	7
+
+struct drm_i915_gem_set_tiling {
+	/** Handle of the buffer to have its tiling state updated */
+	__u32 handle;
+
+	/**
+	 * Tiling mode for the object (I915_TILING_NONE, I915_TILING_X,
+	 * I915_TILING_Y).
+	 *
+	 * This value is to be set on request, and will be updated by the
+	 * kernel on successful return with the actual chosen tiling layout.
+	 *
+	 * The tiling mode may be demoted to I915_TILING_NONE when the system
+	 * has bit 6 swizzling that can't be managed correctly by GEM.
+	 *
+	 * Buffer contents become undefined when changing tiling_mode.
+	 */
+	__u32 tiling_mode;
+
+	/**
+	 * Stride in bytes for the object when in I915_TILING_X or
+	 * I915_TILING_Y.
+	 */
+	__u32 stride;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping.
+	 */
+	__u32 swizzle_mode;
+};
+
+struct drm_i915_gem_get_tiling {
+	/** Handle of the buffer to get tiling state for. */
+	__u32 handle;
+
+	/**
+	 * Current tiling mode for the object (I915_TILING_NONE, I915_TILING_X,
+	 * I915_TILING_Y).
+	 */
+	__u32 tiling_mode;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping.
+	 */
+	__u32 swizzle_mode;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping whilst bound.
+	 */
+	__u32 phys_swizzle_mode;
+};
+
+struct drm_i915_gem_get_aperture {
+	/** Total size of the aperture used by i915_gem_execbuffer, in bytes */
+	__u64 aper_size;
+
+	/**
+	 * Available space in the aperture used by i915_gem_execbuffer, in
+	 * bytes
+	 */
+	__u64 aper_available_size;
+};
+
+struct drm_i915_get_pipe_from_crtc_id {
+	/** ID of CRTC being requested **/
+	__u32 crtc_id;
+
+	/** pipe of requested CRTC **/
+	__u32 pipe;
+};
+
+#define I915_MADV_WILLNEED 0
+#define I915_MADV_DONTNEED 1
+#define __I915_MADV_PURGED 2 /* internal state */
+
+struct drm_i915_gem_madvise {
+	/** Handle of the buffer to change the backing store advice */
+	__u32 handle;
+
+	/* Advice: either the buffer will be needed again in the near future,
+	 *         or wont be and could be discarded under memory pressure.
+	 */
+	__u32 madv;
+
+	/** Whether the backing store still exists. */
+	__u32 retained;
+};
+
+/* flags */
+#define I915_OVERLAY_TYPE_MASK 		0xff
+#define I915_OVERLAY_YUV_PLANAR 	0x01
+#define I915_OVERLAY_YUV_PACKED 	0x02
+#define I915_OVERLAY_RGB		0x03
+
+#define I915_OVERLAY_DEPTH_MASK		0xff00
+#define I915_OVERLAY_RGB24		0x1000
+#define I915_OVERLAY_RGB16		0x2000
+#define I915_OVERLAY_RGB15		0x3000
+#define I915_OVERLAY_YUV422		0x0100
+#define I915_OVERLAY_YUV411		0x0200
+#define I915_OVERLAY_YUV420		0x0300
+#define I915_OVERLAY_YUV410		0x0400
+
+#define I915_OVERLAY_SWAP_MASK		0xff0000
+#define I915_OVERLAY_NO_SWAP		0x000000
+#define I915_OVERLAY_UV_SWAP		0x010000
+#define I915_OVERLAY_Y_SWAP		0x020000
+#define I915_OVERLAY_Y_AND_UV_SWAP	0x030000
+
+#define I915_OVERLAY_FLAGS_MASK		0xff000000
+#define I915_OVERLAY_ENABLE		0x01000000
+
+struct drm_intel_overlay_put_image {
+	/* various flags and src format description */
+	__u32 flags;
+	/* source picture description */
+	__u32 bo_handle;
+	/* stride values and offsets are in bytes, buffer relative */
+	__u16 stride_Y; /* stride for packed formats */
+	__u16 stride_UV;
+	__u32 offset_Y; /* offset for packet formats */
+	__u32 offset_U;
+	__u32 offset_V;
+	/* in pixels */
+	__u16 src_width;
+	__u16 src_height;
+	/* to compensate the scaling factors for partially covered surfaces */
+	__u16 src_scan_width;
+	__u16 src_scan_height;
+	/* output crtc description */
+	__u32 crtc_id;
+	__u16 dst_x;
+	__u16 dst_y;
+	__u16 dst_width;
+	__u16 dst_height;
+};
+
+/* flags */
+#define I915_OVERLAY_UPDATE_ATTRS	(1<<0)
+#define I915_OVERLAY_UPDATE_GAMMA	(1<<1)
+#define I915_OVERLAY_DISABLE_DEST_COLORKEY	(1<<2)
+struct drm_intel_overlay_attrs {
+	__u32 flags;
+	__u32 color_key;
+	__s32 brightness;
+	__u32 contrast;
+	__u32 saturation;
+	__u32 gamma0;
+	__u32 gamma1;
+	__u32 gamma2;
+	__u32 gamma3;
+	__u32 gamma4;
+	__u32 gamma5;
+};
+
+/*
+ * Intel sprite handling
+ *
+ * Color keying works with a min/mask/max tuple.  Both source and destination
+ * color keying is allowed.
+ *
+ * Source keying:
+ * Sprite pixels within the min & max values, masked against the color channels
+ * specified in the mask field, will be transparent.  All other pixels will
+ * be displayed on top of the primary plane.  For RGB surfaces, only the min
+ * and mask fields will be used; ranged compares are not allowed.
+ *
+ * Destination keying:
+ * Primary plane pixels that match the min value, masked against the color
+ * channels specified in the mask field, will be replaced by corresponding
+ * pixels from the sprite plane.
+ *
+ * Note that source & destination keying are exclusive; only one can be
+ * active on a given plane.
+ */
+
+#define I915_SET_COLORKEY_NONE		(1<<0) /* Deprecated. Instead set
+						* flags==0 to disable colorkeying.
+						*/
+#define I915_SET_COLORKEY_DESTINATION	(1<<1)
+#define I915_SET_COLORKEY_SOURCE	(1<<2)
+struct drm_intel_sprite_colorkey {
+	__u32 plane_id;
+	__u32 min_value;
+	__u32 channel_mask;
+	__u32 max_value;
+	__u32 flags;
+};
+
+struct drm_i915_gem_wait {
+	/** Handle of BO we shall wait on */
+	__u32 bo_handle;
+	__u32 flags;
+	/** Number of nanoseconds to wait, Returns time remaining. */
+	__s64 timeout_ns;
+};
+
+struct drm_i915_gem_context_create {
+	/*  output: id of new context*/
+	__u32 ctx_id;
+	__u32 pad;
+};
+
+struct drm_i915_gem_context_destroy {
+	__u32 ctx_id;
+	__u32 pad;
+};
+
+struct drm_i915_reg_read {
+	/*
+	 * Register offset.
+	 * For 64bit wide registers where the upper 32bits don't immediately
+	 * follow the lower 32bits, the offset of the lower 32bits must
+	 * be specified
+	 */
+	__u64 offset;
+#define I915_REG_READ_8B_WA (1ul << 0)
+
+	__u64 val; /* Return value */
+};
+/* Known registers:
+ *
+ * Render engine timestamp - 0x2358 + 64bit - gen7+
+ * - Note this register returns an invalid value if using the default
+ *   single instruction 8byte read, in order to workaround that pass
+ *   flag I915_REG_READ_8B_WA in offset field.
+ *
+ */
+
+struct drm_i915_reset_stats {
+	__u32 ctx_id;
+	__u32 flags;
+
+	/* All resets since boot/module reload, for all contexts */
+	__u32 reset_count;
+
+	/* Number of batches lost when active in GPU, for this context */
+	__u32 batch_active;
+
+	/* Number of batches lost pending for execution, for this context */
+	__u32 batch_pending;
+
+	__u32 pad;
+};
+
+struct drm_i915_gem_userptr {
+	__u64 user_ptr;
+	__u64 user_size;
+	__u32 flags;
+#define I915_USERPTR_READ_ONLY 0x1
+#define I915_USERPTR_UNSYNCHRONIZED 0x80000000
+	/**
+	 * Returned handle for the object.
+	 *
+	 * Object handles are nonzero.
+	 */
+	__u32 handle;
+};
+
+struct drm_i915_gem_context_param {
+	__u32 ctx_id;
+	__u32 size;
+	__u64 param;
+#define I915_CONTEXT_PARAM_BAN_PERIOD	0x1
+#define I915_CONTEXT_PARAM_NO_ZEROMAP	0x2
+#define I915_CONTEXT_PARAM_GTT_SIZE	0x3
+#define I915_CONTEXT_PARAM_NO_ERROR_CAPTURE	0x4
+#define I915_CONTEXT_PARAM_BANNABLE	0x5
+#define I915_CONTEXT_PARAM_PRIORITY	0x6
+#define   I915_CONTEXT_MAX_USER_PRIORITY	1023 /* inclusive */
+#define   I915_CONTEXT_DEFAULT_PRIORITY		0
+#define   I915_CONTEXT_MIN_USER_PRIORITY	-1023 /* inclusive */
+	__u64 value;
+};
+
+enum drm_i915_oa_format {
+	I915_OA_FORMAT_A13 = 1,	    /* HSW only */
+	I915_OA_FORMAT_A29,	    /* HSW only */
+	I915_OA_FORMAT_A13_B8_C8,   /* HSW only */
+	I915_OA_FORMAT_B4_C8,	    /* HSW only */
+	I915_OA_FORMAT_A45_B8_C8,   /* HSW only */
+	I915_OA_FORMAT_B4_C8_A16,   /* HSW only */
+	I915_OA_FORMAT_C4_B8,	    /* HSW+ */
+
+	/* Gen8+ */
+	I915_OA_FORMAT_A12,
+	I915_OA_FORMAT_A12_B8_C8,
+	I915_OA_FORMAT_A32u40_A4u32_B8_C8,
+
+	I915_OA_FORMAT_MAX	    /* non-ABI */
+};
+
+enum drm_i915_perf_property_id {
+	/**
+	 * Open the stream for a specific context handle (as used with
+	 * execbuffer2). A stream opened for a specific context this way
+	 * won't typically require root privileges.
+	 */
+	DRM_I915_PERF_PROP_CTX_HANDLE = 1,
+
+	/**
+	 * A value of 1 requests the inclusion of raw OA unit reports as
+	 * part of stream samples.
+	 */
+	DRM_I915_PERF_PROP_SAMPLE_OA,
+
+	/**
+	 * The value specifies which set of OA unit metrics should be
+	 * be configured, defining the contents of any OA unit reports.
+	 */
+	DRM_I915_PERF_PROP_OA_METRICS_SET,
+
+	/**
+	 * The value specifies the size and layout of OA unit reports.
+	 */
+	DRM_I915_PERF_PROP_OA_FORMAT,
+
+	/**
+	 * Specifying this property implicitly requests periodic OA unit
+	 * sampling and (at least on Haswell) the sampling frequency is derived
+	 * from this exponent as follows:
+	 *
+	 *   80ns * 2^(period_exponent + 1)
+	 */
+	DRM_I915_PERF_PROP_OA_EXPONENT,
+
+	DRM_I915_PERF_PROP_MAX /* non-ABI */
+};
+
+struct drm_i915_perf_open_param {
+	__u32 flags;
+#define I915_PERF_FLAG_FD_CLOEXEC	(1<<0)
+#define I915_PERF_FLAG_FD_NONBLOCK	(1<<1)
+#define I915_PERF_FLAG_DISABLED		(1<<2)
+
+	/** The number of u64 (id, value) pairs */
+	__u32 num_properties;
+
+	/**
+	 * Pointer to array of u64 (id, value) pairs configuring the stream
+	 * to open.
+	 */
+	__u64 properties_ptr;
+};
+
+/**
+ * Enable data capture for a stream that was either opened in a disabled state
+ * via I915_PERF_FLAG_DISABLED or was later disabled via
+ * I915_PERF_IOCTL_DISABLE.
+ *
+ * It is intended to be cheaper to disable and enable a stream than it may be
+ * to close and re-open a stream with the same configuration.
+ *
+ * It's undefined whether any pending data for the stream will be lost.
+ */
+#define I915_PERF_IOCTL_ENABLE	_IO('i', 0x0)
+
+/**
+ * Disable data capture for a stream.
+ *
+ * It is an error to try and read a stream that is disabled.
+ */
+#define I915_PERF_IOCTL_DISABLE	_IO('i', 0x1)
+
+/**
+ * Common to all i915 perf records
+ */
+struct drm_i915_perf_record_header {
+	__u32 type;
+	__u16 pad;
+	__u16 size;
+};
+
+enum drm_i915_perf_record_type {
+
+	/**
+	 * Samples are the work horse record type whose contents are extensible
+	 * and defined when opening an i915 perf stream based on the given
+	 * properties.
+	 *
+	 * Boolean properties following the naming convention
+	 * DRM_I915_PERF_SAMPLE_xyz_PROP request the inclusion of 'xyz' data in
+	 * every sample.
+	 *
+	 * The order of these sample properties given by userspace has no
+	 * affect on the ordering of data within a sample. The order is
+	 * documented here.
+	 *
+	 * struct {
+	 *     struct drm_i915_perf_record_header header;
+	 *
+	 *     { u32 oa_report[]; } && DRM_I915_PERF_PROP_SAMPLE_OA
+	 * };
+	 */
+	DRM_I915_PERF_RECORD_SAMPLE = 1,
+
+	/*
+	 * Indicates that one or more OA reports were not written by the
+	 * hardware. This can happen for example if an MI_REPORT_PERF_COUNT
+	 * command collides with periodic sampling - which would be more likely
+	 * at higher sampling frequencies.
+	 */
+	DRM_I915_PERF_RECORD_OA_REPORT_LOST = 2,
+
+	/**
+	 * An error occurred that resulted in all pending OA reports being lost.
+	 */
+	DRM_I915_PERF_RECORD_OA_BUFFER_LOST = 3,
+
+	DRM_I915_PERF_RECORD_MAX /* non-ABI */
+};
+
+/**
+ * Structure to upload perf dynamic configuration into the kernel.
+ */
+struct drm_i915_perf_oa_config {
+	/** String formatted like "%08x-%04x-%04x-%04x-%012x" */
+	char uuid[36];
+
+	__u32 n_mux_regs;
+	__u32 n_boolean_regs;
+	__u32 n_flex_regs;
+
+	/*
+	 * These fields are pointers to tuples of u32 values (register address,
+	 * value). For example the expected length of the buffer pointed by
+	 * mux_regs_ptr is (2 * sizeof(u32) * n_mux_regs).
+	 */
+	__u64 mux_regs_ptr;
+	__u64 boolean_regs_ptr;
+	__u64 flex_regs_ptr;
+};
+
+struct drm_i915_query_item {
+	__u64 query_id;
+#define DRM_I915_QUERY_TOPOLOGY_INFO    1
+
+	/*
+	 * When set to zero by userspace, this is filled with the size of the
+	 * data to be written at the data_ptr pointer. The kernel sets this
+	 * value to a negative value to signal an error on a particular query
+	 * item.
+	 */
+	__s32 length;
+
+	/*
+	 * Unused for now. Must be cleared to zero.
+	 */
+	__u32 flags;
+
+	/*
+	 * Data will be written at the location pointed by data_ptr when the
+	 * value of length matches the length of the data to be written by the
+	 * kernel.
+	 */
+	__u64 data_ptr;
+};
+
+struct drm_i915_query {
+	__u32 num_items;
+
+	/*
+	 * Unused for now. Must be cleared to zero.
+	 */
+	__u32 flags;
+
+	/*
+	 * This points to an array of num_items drm_i915_query_item structures.
+	 */
+	__u64 items_ptr;
+};
+
+/*
+ * Data written by the kernel with query DRM_I915_QUERY_TOPOLOGY_INFO :
+ *
+ * data: contains the 3 pieces of information :
+ *
+ * - the slice mask with one bit per slice telling whether a slice is
+ *   available. The availability of slice X can be queried with the following
+ *   formula :
+ *
+ *           (data[X / 8] >> (X % 8)) & 1
+ *
+ * - the subslice mask for each slice with one bit per subslice telling
+ *   whether a subslice is available. The availability of subslice Y in slice
+ *   X can be queried with the following formula :
+ *
+ *           (data[subslice_offset +
+ *                 X * subslice_stride +
+ *                 Y / 8] >> (Y % 8)) & 1
+ *
+ * - the EU mask for each subslice in each slice with one bit per EU telling
+ *   whether an EU is available. The availability of EU Z in subslice Y in
+ *   slice X can be queried with the following formula :
+ *
+ *           (data[eu_offset +
+ *                 (X * max_subslices + Y) * eu_stride +
+ *                 Z / 8] >> (Z % 8)) & 1
+ */
+struct drm_i915_query_topology_info {
+	/*
+	 * Unused for now. Must be cleared to zero.
+	 */
+	__u16 flags;
+
+	__u16 max_slices;
+	__u16 max_subslices;
+	__u16 max_eus_per_subslice;
+
+	/*
+	 * Offset in data[] at which the subslice masks are stored.
+	 */
+	__u16 subslice_offset;
+
+	/*
+	 * Stride at which each of the subslice masks for each slice are
+	 * stored.
+	 */
+	__u16 subslice_stride;
+
+	/*
+	 * Offset in data[] at which the EU masks are stored.
+	 */
+	__u16 eu_offset;
+
+	/*
+	 * Stride at which each of the EU masks for each subslice are stored.
+	 */
+	__u16 eu_stride;
+
+	__u8 data[];
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* _UAPI_I915_DRM_H_ */
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
new file mode 100644
index 000000000..0c30ab898
--- /dev/null
+++ b/tools/include/uapi/linux/bpf.h
@@ -0,0 +1,2796 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+#ifndef _UAPI__LINUX_BPF_H__
+#define _UAPI__LINUX_BPF_H__
+
+#include <linux/types.h>
+#include <linux/bpf_common.h>
+
+/* Extended instruction set based on top of classic BPF */
+
+/* instruction classes */
+#define BPF_ALU64	0x07	/* alu mode in double word width */
+
+/* ld/ldx fields */
+#define BPF_DW		0x18	/* double word (64-bit) */
+#define BPF_XADD	0xc0	/* exclusive add */
+
+/* alu/jmp fields */
+#define BPF_MOV		0xb0	/* mov reg to reg */
+#define BPF_ARSH	0xc0	/* sign extending arithmetic shift right */
+
+/* change endianness of a register */
+#define BPF_END		0xd0	/* flags for endianness conversion: */
+#define BPF_TO_LE	0x00	/* convert to little-endian */
+#define BPF_TO_BE	0x08	/* convert to big-endian */
+#define BPF_FROM_LE	BPF_TO_LE
+#define BPF_FROM_BE	BPF_TO_BE
+
+/* jmp encodings */
+#define BPF_JNE		0x50	/* jump != */
+#define BPF_JLT		0xa0	/* LT is unsigned, '<' */
+#define BPF_JLE		0xb0	/* LE is unsigned, '<=' */
+#define BPF_JSGT	0x60	/* SGT is signed '>', GT in x86 */
+#define BPF_JSGE	0x70	/* SGE is signed '>=', GE in x86 */
+#define BPF_JSLT	0xc0	/* SLT is signed, '<' */
+#define BPF_JSLE	0xd0	/* SLE is signed, '<=' */
+#define BPF_CALL	0x80	/* function call */
+#define BPF_EXIT	0x90	/* function return */
+
+/* Register numbers */
+enum {
+	BPF_REG_0 = 0,
+	BPF_REG_1,
+	BPF_REG_2,
+	BPF_REG_3,
+	BPF_REG_4,
+	BPF_REG_5,
+	BPF_REG_6,
+	BPF_REG_7,
+	BPF_REG_8,
+	BPF_REG_9,
+	BPF_REG_10,
+	__MAX_BPF_REG,
+};
+
+/* BPF has 10 general purpose 64-bit registers and stack frame. */
+#define MAX_BPF_REG	__MAX_BPF_REG
+
+struct bpf_insn {
+	__u8	code;		/* opcode */
+	__u8	dst_reg:4;	/* dest register */
+	__u8	src_reg:4;	/* source register */
+	__s16	off;		/* signed offset */
+	__s32	imm;		/* signed immediate constant */
+};
+
+/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */
+struct bpf_lpm_trie_key {
+	__u32	prefixlen;	/* up to 32 for AF_INET, 128 for AF_INET6 */
+	__u8	data[0];	/* Arbitrary size */
+};
+
+struct bpf_cgroup_storage_key {
+	__u64	cgroup_inode_id;	/* cgroup inode id */
+	__u32	attach_type;		/* program attach type */
+};
+
+/* BPF syscall commands, see bpf(2) man-page for details. */
+enum bpf_cmd {
+	BPF_MAP_CREATE,
+	BPF_MAP_LOOKUP_ELEM,
+	BPF_MAP_UPDATE_ELEM,
+	BPF_MAP_DELETE_ELEM,
+	BPF_MAP_GET_NEXT_KEY,
+	BPF_PROG_LOAD,
+	BPF_OBJ_PIN,
+	BPF_OBJ_GET,
+	BPF_PROG_ATTACH,
+	BPF_PROG_DETACH,
+	BPF_PROG_TEST_RUN,
+	BPF_PROG_GET_NEXT_ID,
+	BPF_MAP_GET_NEXT_ID,
+	BPF_PROG_GET_FD_BY_ID,
+	BPF_MAP_GET_FD_BY_ID,
+	BPF_OBJ_GET_INFO_BY_FD,
+	BPF_PROG_QUERY,
+	BPF_RAW_TRACEPOINT_OPEN,
+	BPF_BTF_LOAD,
+	BPF_BTF_GET_FD_BY_ID,
+	BPF_TASK_FD_QUERY,
+};
+
+enum bpf_map_type {
+	BPF_MAP_TYPE_UNSPEC,
+	BPF_MAP_TYPE_HASH,
+	BPF_MAP_TYPE_ARRAY,
+	BPF_MAP_TYPE_PROG_ARRAY,
+	BPF_MAP_TYPE_PERF_EVENT_ARRAY,
+	BPF_MAP_TYPE_PERCPU_HASH,
+	BPF_MAP_TYPE_PERCPU_ARRAY,
+	BPF_MAP_TYPE_STACK_TRACE,
+	BPF_MAP_TYPE_CGROUP_ARRAY,
+	BPF_MAP_TYPE_LRU_HASH,
+	BPF_MAP_TYPE_LRU_PERCPU_HASH,
+	BPF_MAP_TYPE_LPM_TRIE,
+	BPF_MAP_TYPE_ARRAY_OF_MAPS,
+	BPF_MAP_TYPE_HASH_OF_MAPS,
+	BPF_MAP_TYPE_DEVMAP,
+	BPF_MAP_TYPE_SOCKMAP,
+	BPF_MAP_TYPE_CPUMAP,
+	BPF_MAP_TYPE_XSKMAP,
+	BPF_MAP_TYPE_SOCKHASH,
+	BPF_MAP_TYPE_CGROUP_STORAGE,
+	BPF_MAP_TYPE_REUSEPORT_SOCKARRAY,
+};
+
+enum bpf_prog_type {
+	BPF_PROG_TYPE_UNSPEC,
+	BPF_PROG_TYPE_SOCKET_FILTER,
+	BPF_PROG_TYPE_KPROBE,
+	BPF_PROG_TYPE_SCHED_CLS,
+	BPF_PROG_TYPE_SCHED_ACT,
+	BPF_PROG_TYPE_TRACEPOINT,
+	BPF_PROG_TYPE_XDP,
+	BPF_PROG_TYPE_PERF_EVENT,
+	BPF_PROG_TYPE_CGROUP_SKB,
+	BPF_PROG_TYPE_CGROUP_SOCK,
+	BPF_PROG_TYPE_LWT_IN,
+	BPF_PROG_TYPE_LWT_OUT,
+	BPF_PROG_TYPE_LWT_XMIT,
+	BPF_PROG_TYPE_SOCK_OPS,
+	BPF_PROG_TYPE_SK_SKB,
+	BPF_PROG_TYPE_CGROUP_DEVICE,
+	BPF_PROG_TYPE_SK_MSG,
+	BPF_PROG_TYPE_RAW_TRACEPOINT,
+	BPF_PROG_TYPE_CGROUP_SOCK_ADDR,
+	BPF_PROG_TYPE_LWT_SEG6LOCAL,
+	BPF_PROG_TYPE_LIRC_MODE2,
+	BPF_PROG_TYPE_SK_REUSEPORT,
+};
+
+enum bpf_attach_type {
+	BPF_CGROUP_INET_INGRESS,
+	BPF_CGROUP_INET_EGRESS,
+	BPF_CGROUP_INET_SOCK_CREATE,
+	BPF_CGROUP_SOCK_OPS,
+	BPF_SK_SKB_STREAM_PARSER,
+	BPF_SK_SKB_STREAM_VERDICT,
+	BPF_CGROUP_DEVICE,
+	BPF_SK_MSG_VERDICT,
+	BPF_CGROUP_INET4_BIND,
+	BPF_CGROUP_INET6_BIND,
+	BPF_CGROUP_INET4_CONNECT,
+	BPF_CGROUP_INET6_CONNECT,
+	BPF_CGROUP_INET4_POST_BIND,
+	BPF_CGROUP_INET6_POST_BIND,
+	BPF_CGROUP_UDP4_SENDMSG,
+	BPF_CGROUP_UDP6_SENDMSG,
+	BPF_LIRC_MODE2,
+	__MAX_BPF_ATTACH_TYPE
+};
+
+#define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
+
+/* cgroup-bpf attach flags used in BPF_PROG_ATTACH command
+ *
+ * NONE(default): No further bpf programs allowed in the subtree.
+ *
+ * BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program,
+ * the program in this cgroup yields to sub-cgroup program.
+ *
+ * BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program,
+ * that cgroup program gets run in addition to the program in this cgroup.
+ *
+ * Only one program is allowed to be attached to a cgroup with
+ * NONE or BPF_F_ALLOW_OVERRIDE flag.
+ * Attaching another program on top of NONE or BPF_F_ALLOW_OVERRIDE will
+ * release old program and attach the new one. Attach flags has to match.
+ *
+ * Multiple programs are allowed to be attached to a cgroup with
+ * BPF_F_ALLOW_MULTI flag. They are executed in FIFO order
+ * (those that were attached first, run first)
+ * The programs of sub-cgroup are executed first, then programs of
+ * this cgroup and then programs of parent cgroup.
+ * When children program makes decision (like picking TCP CA or sock bind)
+ * parent program has a chance to override it.
+ *
+ * A cgroup with MULTI or OVERRIDE flag allows any attach flags in sub-cgroups.
+ * A cgroup with NONE doesn't allow any programs in sub-cgroups.
+ * Ex1:
+ * cgrp1 (MULTI progs A, B) ->
+ *    cgrp2 (OVERRIDE prog C) ->
+ *      cgrp3 (MULTI prog D) ->
+ *        cgrp4 (OVERRIDE prog E) ->
+ *          cgrp5 (NONE prog F)
+ * the event in cgrp5 triggers execution of F,D,A,B in that order.
+ * if prog F is detached, the execution is E,D,A,B
+ * if prog F and D are detached, the execution is E,A,B
+ * if prog F, E and D are detached, the execution is C,A,B
+ *
+ * All eligible programs are executed regardless of return code from
+ * earlier programs.
+ */
+#define BPF_F_ALLOW_OVERRIDE	(1U << 0)
+#define BPF_F_ALLOW_MULTI	(1U << 1)
+
+/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
+ * verifier will perform strict alignment checking as if the kernel
+ * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set,
+ * and NET_IP_ALIGN defined to 2.
+ */
+#define BPF_F_STRICT_ALIGNMENT	(1U << 0)
+
+/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROF_LOAD command, the
+ * verifier will allow any alignment whatsoever.  On platforms
+ * with strict alignment requirements for loads ands stores (such
+ * as sparc and mips) the verifier validates that all loads and
+ * stores provably follow this requirement.  This flag turns that
+ * checking and enforcement off.
+ *
+ * It is mostly used for testing when we want to validate the
+ * context and memory access aspects of the verifier, but because
+ * of an unaligned access the alignment check would trigger before
+ * the one we are interested in.
+ */
+#define BPF_F_ANY_ALIGNMENT	(1U << 1)
+
+/* when bpf_ldimm64->src_reg == BPF_PSEUDO_MAP_FD, bpf_ldimm64->imm == fd */
+#define BPF_PSEUDO_MAP_FD	1
+
+/* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative
+ * offset to another bpf function
+ */
+#define BPF_PSEUDO_CALL		1
+
+/* flags for BPF_MAP_UPDATE_ELEM command */
+#define BPF_ANY		0 /* create new element or update existing */
+#define BPF_NOEXIST	1 /* create new element if it didn't exist */
+#define BPF_EXIST	2 /* update existing element */
+
+/* flags for BPF_MAP_CREATE command */
+#define BPF_F_NO_PREALLOC	(1U << 0)
+/* Instead of having one common LRU list in the
+ * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list
+ * which can scale and perform better.
+ * Note, the LRU nodes (including free nodes) cannot be moved
+ * across different LRU lists.
+ */
+#define BPF_F_NO_COMMON_LRU	(1U << 1)
+/* Specify numa node during map creation */
+#define BPF_F_NUMA_NODE		(1U << 2)
+
+/* flags for BPF_PROG_QUERY */
+#define BPF_F_QUERY_EFFECTIVE	(1U << 0)
+
+#define BPF_OBJ_NAME_LEN 16U
+
+/* Flags for accessing BPF object */
+#define BPF_F_RDONLY		(1U << 3)
+#define BPF_F_WRONLY		(1U << 4)
+
+/* Flag for stack_map, store build_id+offset instead of pointer */
+#define BPF_F_STACK_BUILD_ID	(1U << 5)
+
+enum bpf_stack_build_id_status {
+	/* user space need an empty entry to identify end of a trace */
+	BPF_STACK_BUILD_ID_EMPTY = 0,
+	/* with valid build_id and offset */
+	BPF_STACK_BUILD_ID_VALID = 1,
+	/* couldn't get build_id, fallback to ip */
+	BPF_STACK_BUILD_ID_IP = 2,
+};
+
+#define BPF_BUILD_ID_SIZE 20
+struct bpf_stack_build_id {
+	__s32		status;
+	unsigned char	build_id[BPF_BUILD_ID_SIZE];
+	union {
+		__u64	offset;
+		__u64	ip;
+	};
+};
+
+union bpf_attr {
+	struct { /* anonymous struct used by BPF_MAP_CREATE command */
+		__u32	map_type;	/* one of enum bpf_map_type */
+		__u32	key_size;	/* size of key in bytes */
+		__u32	value_size;	/* size of value in bytes */
+		__u32	max_entries;	/* max number of entries in a map */
+		__u32	map_flags;	/* BPF_MAP_CREATE related
+					 * flags defined above.
+					 */
+		__u32	inner_map_fd;	/* fd pointing to the inner map */
+		__u32	numa_node;	/* numa node (effective only if
+					 * BPF_F_NUMA_NODE is set).
+					 */
+		char	map_name[BPF_OBJ_NAME_LEN];
+		__u32	map_ifindex;	/* ifindex of netdev to create on */
+		__u32	btf_fd;		/* fd pointing to a BTF type data */
+		__u32	btf_key_type_id;	/* BTF type_id of the key */
+		__u32	btf_value_type_id;	/* BTF type_id of the value */
+	};
+
+	struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
+		__u32		map_fd;
+		__aligned_u64	key;
+		union {
+			__aligned_u64 value;
+			__aligned_u64 next_key;
+		};
+		__u64		flags;
+	};
+
+	struct { /* anonymous struct used by BPF_PROG_LOAD command */
+		__u32		prog_type;	/* one of enum bpf_prog_type */
+		__u32		insn_cnt;
+		__aligned_u64	insns;
+		__aligned_u64	license;
+		__u32		log_level;	/* verbosity level of verifier */
+		__u32		log_size;	/* size of user buffer */
+		__aligned_u64	log_buf;	/* user supplied buffer */
+		__u32		kern_version;	/* checked when prog_type=kprobe */
+		__u32		prog_flags;
+		char		prog_name[BPF_OBJ_NAME_LEN];
+		__u32		prog_ifindex;	/* ifindex of netdev to prep for */
+		/* For some prog types expected attach type must be known at
+		 * load time to verify attach type specific parts of prog
+		 * (context accesses, allowed helpers, etc).
+		 */
+		__u32		expected_attach_type;
+	};
+
+	struct { /* anonymous struct used by BPF_OBJ_* commands */
+		__aligned_u64	pathname;
+		__u32		bpf_fd;
+		__u32		file_flags;
+	};
+
+	struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */
+		__u32		target_fd;	/* container object to attach to */
+		__u32		attach_bpf_fd;	/* eBPF program to attach */
+		__u32		attach_type;
+		__u32		attach_flags;
+	};
+
+	struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */
+		__u32		prog_fd;
+		__u32		retval;
+		__u32		data_size_in;
+		__u32		data_size_out;
+		__aligned_u64	data_in;
+		__aligned_u64	data_out;
+		__u32		repeat;
+		__u32		duration;
+	} test;
+
+	struct { /* anonymous struct used by BPF_*_GET_*_ID */
+		union {
+			__u32		start_id;
+			__u32		prog_id;
+			__u32		map_id;
+			__u32		btf_id;
+		};
+		__u32		next_id;
+		__u32		open_flags;
+	};
+
+	struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */
+		__u32		bpf_fd;
+		__u32		info_len;
+		__aligned_u64	info;
+	} info;
+
+	struct { /* anonymous struct used by BPF_PROG_QUERY command */
+		__u32		target_fd;	/* container object to query */
+		__u32		attach_type;
+		__u32		query_flags;
+		__u32		attach_flags;
+		__aligned_u64	prog_ids;
+		__u32		prog_cnt;
+	} query;
+
+	struct {
+		__u64 name;
+		__u32 prog_fd;
+	} raw_tracepoint;
+
+	struct { /* anonymous struct for BPF_BTF_LOAD */
+		__aligned_u64	btf;
+		__aligned_u64	btf_log_buf;
+		__u32		btf_size;
+		__u32		btf_log_size;
+		__u32		btf_log_level;
+	};
+
+	struct {
+		__u32		pid;		/* input: pid */
+		__u32		fd;		/* input: fd */
+		__u32		flags;		/* input: flags */
+		__u32		buf_len;	/* input/output: buf len */
+		__aligned_u64	buf;		/* input/output:
+						 *   tp_name for tracepoint
+						 *   symbol for kprobe
+						 *   filename for uprobe
+						 */
+		__u32		prog_id;	/* output: prod_id */
+		__u32		fd_type;	/* output: BPF_FD_TYPE_* */
+		__u64		probe_offset;	/* output: probe_offset */
+		__u64		probe_addr;	/* output: probe_addr */
+	} task_fd_query;
+} __attribute__((aligned(8)));
+
+/* The description below is an attempt at providing documentation to eBPF
+ * developers about the multiple available eBPF helper functions. It can be
+ * parsed and used to produce a manual page. The workflow is the following,
+ * and requires the rst2man utility:
+ *
+ *     $ ./scripts/bpf_helpers_doc.py \
+ *             --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
+ *     $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
+ *     $ man /tmp/bpf-helpers.7
+ *
+ * Note that in order to produce this external documentation, some RST
+ * formatting is used in the descriptions to get "bold" and "italics" in
+ * manual pages. Also note that the few trailing white spaces are
+ * intentional, removing them would break paragraphs for rst2man.
+ *
+ * Start of BPF helper function descriptions:
+ *
+ * void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+ * 	Description
+ * 		Perform a lookup in *map* for an entry associated to *key*.
+ * 	Return
+ * 		Map value associated to *key*, or **NULL** if no entry was
+ * 		found.
+ *
+ * int bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags)
+ * 	Description
+ * 		Add or update the value of the entry associated to *key* in
+ * 		*map* with *value*. *flags* is one of:
+ *
+ * 		**BPF_NOEXIST**
+ * 			The entry for *key* must not exist in the map.
+ * 		**BPF_EXIST**
+ * 			The entry for *key* must already exist in the map.
+ * 		**BPF_ANY**
+ * 			No condition on the existence of the entry for *key*.
+ *
+ * 		Flag value **BPF_NOEXIST** cannot be used for maps of types
+ * 		**BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY**  (all
+ * 		elements always exist), the helper would return an error.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_map_delete_elem(struct bpf_map *map, const void *key)
+ * 	Description
+ * 		Delete entry with *key* from *map*.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_probe_read(void *dst, u32 size, const void *src)
+ * 	Description
+ * 		For tracing programs, safely attempt to read *size* bytes from
+ * 		address *src* and store the data in *dst*.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * u64 bpf_ktime_get_ns(void)
+ * 	Description
+ * 		Return the time elapsed since system boot, in nanoseconds.
+ * 	Return
+ * 		Current *ktime*.
+ *
+ * int bpf_trace_printk(const char *fmt, u32 fmt_size, ...)
+ * 	Description
+ * 		This helper is a "printk()-like" facility for debugging. It
+ * 		prints a message defined by format *fmt* (of size *fmt_size*)
+ * 		to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if
+ * 		available. It can take up to three additional **u64**
+ * 		arguments (as an eBPF helpers, the total number of arguments is
+ * 		limited to five).
+ *
+ * 		Each time the helper is called, it appends a line to the trace.
+ * 		The format of the trace is customizable, and the exact output
+ * 		one will get depends on the options set in
+ * 		*\/sys/kernel/debug/tracing/trace_options* (see also the
+ * 		*README* file under the same directory). However, it usually
+ * 		defaults to something like:
+ *
+ * 		::
+ *
+ * 			telnet-470   [001] .N.. 419421.045894: 0x00000001: <formatted msg>
+ *
+ * 		In the above:
+ *
+ * 			* ``telnet`` is the name of the current task.
+ * 			* ``470`` is the PID of the current task.
+ * 			* ``001`` is the CPU number on which the task is
+ * 			  running.
+ * 			* In ``.N..``, each character refers to a set of
+ * 			  options (whether irqs are enabled, scheduling
+ * 			  options, whether hard/softirqs are running, level of
+ * 			  preempt_disabled respectively). **N** means that
+ * 			  **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED**
+ * 			  are set.
+ * 			* ``419421.045894`` is a timestamp.
+ * 			* ``0x00000001`` is a fake value used by BPF for the
+ * 			  instruction pointer register.
+ * 			* ``<formatted msg>`` is the message formatted with
+ * 			  *fmt*.
+ *
+ * 		The conversion specifiers supported by *fmt* are similar, but
+ * 		more limited than for printk(). They are **%d**, **%i**,
+ * 		**%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**,
+ * 		**%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size
+ * 		of field, padding with zeroes, etc.) is available, and the
+ * 		helper will return **-EINVAL** (but print nothing) if it
+ * 		encounters an unknown specifier.
+ *
+ * 		Also, note that **bpf_trace_printk**\ () is slow, and should
+ * 		only be used for debugging purposes. For this reason, a notice
+ * 		bloc (spanning several lines) is printed to kernel logs and
+ * 		states that the helper should not be used "for production use"
+ * 		the first time this helper is used (or more precisely, when
+ * 		**trace_printk**\ () buffers are allocated). For passing values
+ * 		to user space, perf events should be preferred.
+ * 	Return
+ * 		The number of bytes written to the buffer, or a negative error
+ * 		in case of failure.
+ *
+ * u32 bpf_get_prandom_u32(void)
+ * 	Description
+ * 		Get a pseudo-random number.
+ *
+ * 		From a security point of view, this helper uses its own
+ * 		pseudo-random internal state, and cannot be used to infer the
+ * 		seed of other random functions in the kernel. However, it is
+ * 		essential to note that the generator used by the helper is not
+ * 		cryptographically secure.
+ * 	Return
+ * 		A random 32-bit unsigned value.
+ *
+ * u32 bpf_get_smp_processor_id(void)
+ * 	Description
+ * 		Get the SMP (symmetric multiprocessing) processor id. Note that
+ * 		all programs run with preemption disabled, which means that the
+ * 		SMP processor id is stable during all the execution of the
+ * 		program.
+ * 	Return
+ * 		The SMP id of the processor running the program.
+ *
+ * int bpf_skb_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len, u64 flags)
+ * 	Description
+ * 		Store *len* bytes from address *from* into the packet
+ * 		associated to *skb*, at *offset*. *flags* are a combination of
+ * 		**BPF_F_RECOMPUTE_CSUM** (automatically recompute the
+ * 		checksum for the packet after storing the bytes) and
+ * 		**BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\
+ * 		**->swhash** and *skb*\ **->l4hash** to 0).
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_l3_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 size)
+ * 	Description
+ * 		Recompute the layer 3 (e.g. IP) checksum for the packet
+ * 		associated to *skb*. Computation is incremental, so the helper
+ * 		must know the former value of the header field that was
+ * 		modified (*from*), the new value of this field (*to*), and the
+ * 		number of bytes (2 or 4) for this field, stored in *size*.
+ * 		Alternatively, it is possible to store the difference between
+ * 		the previous and the new values of the header field in *to*, by
+ * 		setting *from* and *size* to 0. For both methods, *offset*
+ * 		indicates the location of the IP checksum within the packet.
+ *
+ * 		This helper works in combination with **bpf_csum_diff**\ (),
+ * 		which does not update the checksum in-place, but offers more
+ * 		flexibility and can handle sizes larger than 2 or 4 for the
+ * 		checksum to update.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_l4_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 flags)
+ * 	Description
+ * 		Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the
+ * 		packet associated to *skb*. Computation is incremental, so the
+ * 		helper must know the former value of the header field that was
+ * 		modified (*from*), the new value of this field (*to*), and the
+ * 		number of bytes (2 or 4) for this field, stored on the lowest
+ * 		four bits of *flags*. Alternatively, it is possible to store
+ * 		the difference between the previous and the new values of the
+ * 		header field in *to*, by setting *from* and the four lowest
+ * 		bits of *flags* to 0. For both methods, *offset* indicates the
+ * 		location of the IP checksum within the packet. In addition to
+ * 		the size of the field, *flags* can be added (bitwise OR) actual
+ * 		flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left
+ * 		untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and
+ * 		for updates resulting in a null checksum the value is set to
+ * 		**CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates
+ * 		the checksum is to be computed against a pseudo-header.
+ *
+ * 		This helper works in combination with **bpf_csum_diff**\ (),
+ * 		which does not update the checksum in-place, but offers more
+ * 		flexibility and can handle sizes larger than 2 or 4 for the
+ * 		checksum to update.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_tail_call(void *ctx, struct bpf_map *prog_array_map, u32 index)
+ * 	Description
+ * 		This special helper is used to trigger a "tail call", or in
+ * 		other words, to jump into another eBPF program. The same stack
+ * 		frame is used (but values on stack and in registers for the
+ * 		caller are not accessible to the callee). This mechanism allows
+ * 		for program chaining, either for raising the maximum number of
+ * 		available eBPF instructions, or to execute given programs in
+ * 		conditional blocks. For security reasons, there is an upper
+ * 		limit to the number of successive tail calls that can be
+ * 		performed.
+ *
+ * 		Upon call of this helper, the program attempts to jump into a
+ * 		program referenced at index *index* in *prog_array_map*, a
+ * 		special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes
+ * 		*ctx*, a pointer to the context.
+ *
+ * 		If the call succeeds, the kernel immediately runs the first
+ * 		instruction of the new program. This is not a function call,
+ * 		and it never returns to the previous program. If the call
+ * 		fails, then the helper has no effect, and the caller continues
+ * 		to run its subsequent instructions. A call can fail if the
+ * 		destination program for the jump does not exist (i.e. *index*
+ * 		is superior to the number of entries in *prog_array_map*), or
+ * 		if the maximum number of tail calls has been reached for this
+ * 		chain of programs. This limit is defined in the kernel by the
+ * 		macro **MAX_TAIL_CALL_CNT** (not accessible to user space),
+ * 		which is currently set to 32.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_clone_redirect(struct sk_buff *skb, u32 ifindex, u64 flags)
+ * 	Description
+ * 		Clone and redirect the packet associated to *skb* to another
+ * 		net device of index *ifindex*. Both ingress and egress
+ * 		interfaces can be used for redirection. The **BPF_F_INGRESS**
+ * 		value in *flags* is used to make the distinction (ingress path
+ * 		is selected if the flag is present, egress path otherwise).
+ * 		This is the only flag supported for now.
+ *
+ * 		In comparison with **bpf_redirect**\ () helper,
+ * 		**bpf_clone_redirect**\ () has the associated cost of
+ * 		duplicating the packet buffer, but this can be executed out of
+ * 		the eBPF program. Conversely, **bpf_redirect**\ () is more
+ * 		efficient, but it is handled through an action code where the
+ * 		redirection happens only after the eBPF program has returned.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * u64 bpf_get_current_pid_tgid(void)
+ * 	Return
+ * 		A 64-bit integer containing the current tgid and pid, and
+ * 		created as such:
+ * 		*current_task*\ **->tgid << 32 \|**
+ * 		*current_task*\ **->pid**.
+ *
+ * u64 bpf_get_current_uid_gid(void)
+ * 	Return
+ * 		A 64-bit integer containing the current GID and UID, and
+ * 		created as such: *current_gid* **<< 32 \|** *current_uid*.
+ *
+ * int bpf_get_current_comm(char *buf, u32 size_of_buf)
+ * 	Description
+ * 		Copy the **comm** attribute of the current task into *buf* of
+ * 		*size_of_buf*. The **comm** attribute contains the name of
+ * 		the executable (excluding the path) for the current task. The
+ * 		*size_of_buf* must be strictly positive. On success, the
+ * 		helper makes sure that the *buf* is NUL-terminated. On failure,
+ * 		it is filled with zeroes.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * u32 bpf_get_cgroup_classid(struct sk_buff *skb)
+ * 	Description
+ * 		Retrieve the classid for the current task, i.e. for the net_cls
+ * 		cgroup to which *skb* belongs.
+ *
+ * 		This helper can be used on TC egress path, but not on ingress.
+ *
+ * 		The net_cls cgroup provides an interface to tag network packets
+ * 		based on a user-provided identifier for all traffic coming from
+ * 		the tasks belonging to the related cgroup. See also the related
+ * 		kernel documentation, available from the Linux sources in file
+ * 		*Documentation/cgroup-v1/net_cls.txt*.
+ *
+ * 		The Linux kernel has two versions for cgroups: there are
+ * 		cgroups v1 and cgroups v2. Both are available to users, who can
+ * 		use a mixture of them, but note that the net_cls cgroup is for
+ * 		cgroup v1 only. This makes it incompatible with BPF programs
+ * 		run on cgroups, which is a cgroup-v2-only feature (a socket can
+ * 		only hold data for one version of cgroups at a time).
+ *
+ * 		This helper is only available is the kernel was compiled with
+ * 		the **CONFIG_CGROUP_NET_CLASSID** configuration option set to
+ * 		"**y**" or to "**m**".
+ * 	Return
+ * 		The classid, or 0 for the default unconfigured classid.
+ *
+ * int bpf_skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci)
+ * 	Description
+ * 		Push a *vlan_tci* (VLAN tag control information) of protocol
+ * 		*vlan_proto* to the packet associated to *skb*, then update
+ * 		the checksum. Note that if *vlan_proto* is different from
+ * 		**ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to
+ * 		be **ETH_P_8021Q**.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_vlan_pop(struct sk_buff *skb)
+ * 	Description
+ * 		Pop a VLAN header from the packet associated to *skb*.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_get_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags)
+ * 	Description
+ * 		Get tunnel metadata. This helper takes a pointer *key* to an
+ * 		empty **struct bpf_tunnel_key** of **size**, that will be
+ * 		filled with tunnel metadata for the packet associated to *skb*.
+ * 		The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which
+ * 		indicates that the tunnel is based on IPv6 protocol instead of
+ * 		IPv4.
+ *
+ * 		The **struct bpf_tunnel_key** is an object that generalizes the
+ * 		principal parameters used by various tunneling protocols into a
+ * 		single struct. This way, it can be used to easily make a
+ * 		decision based on the contents of the encapsulation header,
+ * 		"summarized" in this struct. In particular, it holds the IP
+ * 		address of the remote end (IPv4 or IPv6, depending on the case)
+ * 		in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also,
+ * 		this struct exposes the *key*\ **->tunnel_id**, which is
+ * 		generally mapped to a VNI (Virtual Network Identifier), making
+ * 		it programmable together with the **bpf_skb_set_tunnel_key**\
+ * 		() helper.
+ *
+ * 		Let's imagine that the following code is part of a program
+ * 		attached to the TC ingress interface, on one end of a GRE
+ * 		tunnel, and is supposed to filter out all messages coming from
+ * 		remote ends with IPv4 address other than 10.0.0.1:
+ *
+ * 		::
+ *
+ * 			int ret;
+ * 			struct bpf_tunnel_key key = {};
+ * 			
+ * 			ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0);
+ * 			if (ret < 0)
+ * 				return TC_ACT_SHOT;	// drop packet
+ * 			
+ * 			if (key.remote_ipv4 != 0x0a000001)
+ * 				return TC_ACT_SHOT;	// drop packet
+ * 			
+ * 			return TC_ACT_OK;		// accept packet
+ *
+ * 		This interface can also be used with all encapsulation devices
+ * 		that can operate in "collect metadata" mode: instead of having
+ * 		one network device per specific configuration, the "collect
+ * 		metadata" mode only requires a single device where the
+ * 		configuration can be extracted from this helper.
+ *
+ * 		This can be used together with various tunnels such as VXLan,
+ * 		Geneve, GRE or IP in IP (IPIP).
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_set_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags)
+ * 	Description
+ * 		Populate tunnel metadata for packet associated to *skb.* The
+ * 		tunnel metadata is set to the contents of *key*, of *size*. The
+ * 		*flags* can be set to a combination of the following values:
+ *
+ * 		**BPF_F_TUNINFO_IPV6**
+ * 			Indicate that the tunnel is based on IPv6 protocol
+ * 			instead of IPv4.
+ * 		**BPF_F_ZERO_CSUM_TX**
+ * 			For IPv4 packets, add a flag to tunnel metadata
+ * 			indicating that checksum computation should be skipped
+ * 			and checksum set to zeroes.
+ * 		**BPF_F_DONT_FRAGMENT**
+ * 			Add a flag to tunnel metadata indicating that the
+ * 			packet should not be fragmented.
+ * 		**BPF_F_SEQ_NUMBER**
+ * 			Add a flag to tunnel metadata indicating that a
+ * 			sequence number should be added to tunnel header before
+ * 			sending the packet. This flag was added for GRE
+ * 			encapsulation, but might be used with other protocols
+ * 			as well in the future.
+ *
+ * 		Here is a typical usage on the transmit path:
+ *
+ * 		::
+ *
+ * 			struct bpf_tunnel_key key;
+ * 			     populate key ...
+ * 			bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0);
+ * 			bpf_clone_redirect(skb, vxlan_dev_ifindex, 0);
+ *
+ * 		See also the description of the **bpf_skb_get_tunnel_key**\ ()
+ * 		helper for additional information.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * u64 bpf_perf_event_read(struct bpf_map *map, u64 flags)
+ * 	Description
+ * 		Read the value of a perf event counter. This helper relies on a
+ * 		*map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of
+ * 		the perf event counter is selected when *map* is updated with
+ * 		perf event file descriptors. The *map* is an array whose size
+ * 		is the number of available CPUs, and each cell contains a value
+ * 		relative to one CPU. The value to retrieve is indicated by
+ * 		*flags*, that contains the index of the CPU to look up, masked
+ * 		with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
+ * 		**BPF_F_CURRENT_CPU** to indicate that the value for the
+ * 		current CPU should be retrieved.
+ *
+ * 		Note that before Linux 4.13, only hardware perf event can be
+ * 		retrieved.
+ *
+ * 		Also, be aware that the newer helper
+ * 		**bpf_perf_event_read_value**\ () is recommended over
+ * 		**bpf_perf_event_read**\ () in general. The latter has some ABI
+ * 		quirks where error and counter value are used as a return code
+ * 		(which is wrong to do since ranges may overlap). This issue is
+ * 		fixed with **bpf_perf_event_read_value**\ (), which at the same
+ * 		time provides more features over the **bpf_perf_event_read**\
+ * 		() interface. Please refer to the description of
+ * 		**bpf_perf_event_read_value**\ () for details.
+ * 	Return
+ * 		The value of the perf event counter read from the map, or a
+ * 		negative error code in case of failure.
+ *
+ * int bpf_redirect(u32 ifindex, u64 flags)
+ * 	Description
+ * 		Redirect the packet to another net device of index *ifindex*.
+ * 		This helper is somewhat similar to **bpf_clone_redirect**\
+ * 		(), except that the packet is not cloned, which provides
+ * 		increased performance.
+ *
+ * 		Except for XDP, both ingress and egress interfaces can be used
+ * 		for redirection. The **BPF_F_INGRESS** value in *flags* is used
+ * 		to make the distinction (ingress path is selected if the flag
+ * 		is present, egress path otherwise). Currently, XDP only
+ * 		supports redirection to the egress interface, and accepts no
+ * 		flag at all.
+ *
+ * 		The same effect can be attained with the more generic
+ * 		**bpf_redirect_map**\ (), which requires specific maps to be
+ * 		used but offers better performance.
+ * 	Return
+ * 		For XDP, the helper returns **XDP_REDIRECT** on success or
+ * 		**XDP_ABORTED** on error. For other program types, the values
+ * 		are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on
+ * 		error.
+ *
+ * u32 bpf_get_route_realm(struct sk_buff *skb)
+ * 	Description
+ * 		Retrieve the realm or the route, that is to say the
+ * 		**tclassid** field of the destination for the *skb*. The
+ * 		indentifier retrieved is a user-provided tag, similar to the
+ * 		one used with the net_cls cgroup (see description for
+ * 		**bpf_get_cgroup_classid**\ () helper), but here this tag is
+ * 		held by a route (a destination entry), not by a task.
+ *
+ * 		Retrieving this identifier works with the clsact TC egress hook
+ * 		(see also **tc-bpf(8)**), or alternatively on conventional
+ * 		classful egress qdiscs, but not on TC ingress path. In case of
+ * 		clsact TC egress hook, this has the advantage that, internally,
+ * 		the destination entry has not been dropped yet in the transmit
+ * 		path. Therefore, the destination entry does not need to be
+ * 		artificially held via **netif_keep_dst**\ () for a classful
+ * 		qdisc until the *skb* is freed.
+ *
+ * 		This helper is available only if the kernel was compiled with
+ * 		**CONFIG_IP_ROUTE_CLASSID** configuration option.
+ * 	Return
+ * 		The realm of the route for the packet associated to *skb*, or 0
+ * 		if none was found.
+ *
+ * int bpf_perf_event_output(struct pt_reg *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
+ * 	Description
+ * 		Write raw *data* blob into a special BPF perf event held by
+ * 		*map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
+ * 		event must have the following attributes: **PERF_SAMPLE_RAW**
+ * 		as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
+ * 		**PERF_COUNT_SW_BPF_OUTPUT** as **config**.
+ *
+ * 		The *flags* are used to indicate the index in *map* for which
+ * 		the value must be put, masked with **BPF_F_INDEX_MASK**.
+ * 		Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
+ * 		to indicate that the index of the current CPU core should be
+ * 		used.
+ *
+ * 		The value to write, of *size*, is passed through eBPF stack and
+ * 		pointed by *data*.
+ *
+ * 		The context of the program *ctx* needs also be passed to the
+ * 		helper.
+ *
+ * 		On user space, a program willing to read the values needs to
+ * 		call **perf_event_open**\ () on the perf event (either for
+ * 		one or for all CPUs) and to store the file descriptor into the
+ * 		*map*. This must be done before the eBPF program can send data
+ * 		into it. An example is available in file
+ * 		*samples/bpf/trace_output_user.c* in the Linux kernel source
+ * 		tree (the eBPF program counterpart is in
+ * 		*samples/bpf/trace_output_kern.c*).
+ *
+ * 		**bpf_perf_event_output**\ () achieves better performance
+ * 		than **bpf_trace_printk**\ () for sharing data with user
+ * 		space, and is much better suitable for streaming data from eBPF
+ * 		programs.
+ *
+ * 		Note that this helper is not restricted to tracing use cases
+ * 		and can be used with programs attached to TC or XDP as well,
+ * 		where it allows for passing data to user space listeners. Data
+ * 		can be:
+ *
+ * 		* Only custom structs,
+ * 		* Only the packet payload, or
+ * 		* A combination of both.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_load_bytes(const struct sk_buff *skb, u32 offset, void *to, u32 len)
+ * 	Description
+ * 		This helper was provided as an easy way to load data from a
+ * 		packet. It can be used to load *len* bytes from *offset* from
+ * 		the packet associated to *skb*, into the buffer pointed by
+ * 		*to*.
+ *
+ * 		Since Linux 4.7, usage of this helper has mostly been replaced
+ * 		by "direct packet access", enabling packet data to be
+ * 		manipulated with *skb*\ **->data** and *skb*\ **->data_end**
+ * 		pointing respectively to the first byte of packet data and to
+ * 		the byte after the last byte of packet data. However, it
+ * 		remains useful if one wishes to read large quantities of data
+ * 		at once from a packet into the eBPF stack.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_get_stackid(struct pt_reg *ctx, struct bpf_map *map, u64 flags)
+ * 	Description
+ * 		Walk a user or a kernel stack and return its id. To achieve
+ * 		this, the helper needs *ctx*, which is a pointer to the context
+ * 		on which the tracing program is executed, and a pointer to a
+ * 		*map* of type **BPF_MAP_TYPE_STACK_TRACE**.
+ *
+ * 		The last argument, *flags*, holds the number of stack frames to
+ * 		skip (from 0 to 255), masked with
+ * 		**BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
+ * 		a combination of the following flags:
+ *
+ * 		**BPF_F_USER_STACK**
+ * 			Collect a user space stack instead of a kernel stack.
+ * 		**BPF_F_FAST_STACK_CMP**
+ * 			Compare stacks by hash only.
+ * 		**BPF_F_REUSE_STACKID**
+ * 			If two different stacks hash into the same *stackid*,
+ * 			discard the old one.
+ *
+ * 		The stack id retrieved is a 32 bit long integer handle which
+ * 		can be further combined with other data (including other stack
+ * 		ids) and used as a key into maps. This can be useful for
+ * 		generating a variety of graphs (such as flame graphs or off-cpu
+ * 		graphs).
+ *
+ * 		For walking a stack, this helper is an improvement over
+ * 		**bpf_probe_read**\ (), which can be used with unrolled loops
+ * 		but is not efficient and consumes a lot of eBPF instructions.
+ * 		Instead, **bpf_get_stackid**\ () can collect up to
+ * 		**PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that
+ * 		this limit can be controlled with the **sysctl** program, and
+ * 		that it should be manually increased in order to profile long
+ * 		user stacks (such as stacks for Java programs). To do so, use:
+ *
+ * 		::
+ *
+ * 			# sysctl kernel.perf_event_max_stack=<new value>
+ * 	Return
+ * 		The positive or null stack id on success, or a negative error
+ * 		in case of failure.
+ *
+ * s64 bpf_csum_diff(__be32 *from, u32 from_size, __be32 *to, u32 to_size, __wsum seed)
+ * 	Description
+ * 		Compute a checksum difference, from the raw buffer pointed by
+ * 		*from*, of length *from_size* (that must be a multiple of 4),
+ * 		towards the raw buffer pointed by *to*, of size *to_size*
+ * 		(same remark). An optional *seed* can be added to the value
+ * 		(this can be cascaded, the seed may come from a previous call
+ * 		to the helper).
+ *
+ * 		This is flexible enough to be used in several ways:
+ *
+ * 		* With *from_size* == 0, *to_size* > 0 and *seed* set to
+ * 		  checksum, it can be used when pushing new data.
+ * 		* With *from_size* > 0, *to_size* == 0 and *seed* set to
+ * 		  checksum, it can be used when removing data from a packet.
+ * 		* With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it
+ * 		  can be used to compute a diff. Note that *from_size* and
+ * 		  *to_size* do not need to be equal.
+ *
+ * 		This helper can be used in combination with
+ * 		**bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to
+ * 		which one can feed in the difference computed with
+ * 		**bpf_csum_diff**\ ().
+ * 	Return
+ * 		The checksum result, or a negative error code in case of
+ * 		failure.
+ *
+ * int bpf_skb_get_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size)
+ * 	Description
+ * 		Retrieve tunnel options metadata for the packet associated to
+ * 		*skb*, and store the raw tunnel option data to the buffer *opt*
+ * 		of *size*.
+ *
+ * 		This helper can be used with encapsulation devices that can
+ * 		operate in "collect metadata" mode (please refer to the related
+ * 		note in the description of **bpf_skb_get_tunnel_key**\ () for
+ * 		more details). A particular example where this can be used is
+ * 		in combination with the Geneve encapsulation protocol, where it
+ * 		allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper)
+ * 		and retrieving arbitrary TLVs (Type-Length-Value headers) from
+ * 		the eBPF program. This allows for full customization of these
+ * 		headers.
+ * 	Return
+ * 		The size of the option data retrieved.
+ *
+ * int bpf_skb_set_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size)
+ * 	Description
+ * 		Set tunnel options metadata for the packet associated to *skb*
+ * 		to the option data contained in the raw buffer *opt* of *size*.
+ *
+ * 		See also the description of the **bpf_skb_get_tunnel_opt**\ ()
+ * 		helper for additional information.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_change_proto(struct sk_buff *skb, __be16 proto, u64 flags)
+ * 	Description
+ * 		Change the protocol of the *skb* to *proto*. Currently
+ * 		supported are transition from IPv4 to IPv6, and from IPv6 to
+ * 		IPv4. The helper takes care of the groundwork for the
+ * 		transition, including resizing the socket buffer. The eBPF
+ * 		program is expected to fill the new headers, if any, via
+ * 		**skb_store_bytes**\ () and to recompute the checksums with
+ * 		**bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\
+ * 		(). The main case for this helper is to perform NAT64
+ * 		operations out of an eBPF program.
+ *
+ * 		Internally, the GSO type is marked as dodgy so that headers are
+ * 		checked and segments are recalculated by the GSO/GRO engine.
+ * 		The size for GSO target is adapted as well.
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_change_type(struct sk_buff *skb, u32 type)
+ * 	Description
+ * 		Change the packet type for the packet associated to *skb*. This
+ * 		comes down to setting *skb*\ **->pkt_type** to *type*, except
+ * 		the eBPF program does not have a write access to *skb*\
+ * 		**->pkt_type** beside this helper. Using a helper here allows
+ * 		for graceful handling of errors.
+ *
+ * 		The major use case is to change incoming *skb*s to
+ * 		**PACKET_HOST** in a programmatic way instead of having to
+ * 		recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for
+ * 		example.
+ *
+ * 		Note that *type* only allows certain values. At this time, they
+ * 		are:
+ *
+ * 		**PACKET_HOST**
+ * 			Packet is for us.
+ * 		**PACKET_BROADCAST**
+ * 			Send packet to all.
+ * 		**PACKET_MULTICAST**
+ * 			Send packet to group.
+ * 		**PACKET_OTHERHOST**
+ * 			Send packet to someone else.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_under_cgroup(struct sk_buff *skb, struct bpf_map *map, u32 index)
+ * 	Description
+ * 		Check whether *skb* is a descendant of the cgroup2 held by
+ * 		*map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
+ * 	Return
+ * 		The return value depends on the result of the test, and can be:
+ *
+ * 		* 0, if the *skb* failed the cgroup2 descendant test.
+ * 		* 1, if the *skb* succeeded the cgroup2 descendant test.
+ * 		* A negative error code, if an error occurred.
+ *
+ * u32 bpf_get_hash_recalc(struct sk_buff *skb)
+ * 	Description
+ * 		Retrieve the hash of the packet, *skb*\ **->hash**. If it is
+ * 		not set, in particular if the hash was cleared due to mangling,
+ * 		recompute this hash. Later accesses to the hash can be done
+ * 		directly with *skb*\ **->hash**.
+ *
+ * 		Calling **bpf_set_hash_invalid**\ (), changing a packet
+ * 		prototype with **bpf_skb_change_proto**\ (), or calling
+ * 		**bpf_skb_store_bytes**\ () with the
+ * 		**BPF_F_INVALIDATE_HASH** are actions susceptible to clear
+ * 		the hash and to trigger a new computation for the next call to
+ * 		**bpf_get_hash_recalc**\ ().
+ * 	Return
+ * 		The 32-bit hash.
+ *
+ * u64 bpf_get_current_task(void)
+ * 	Return
+ * 		A pointer to the current task struct.
+ *
+ * int bpf_probe_write_user(void *dst, const void *src, u32 len)
+ * 	Description
+ * 		Attempt in a safe way to write *len* bytes from the buffer
+ * 		*src* to *dst* in memory. It only works for threads that are in
+ * 		user context, and *dst* must be a valid user space address.
+ *
+ * 		This helper should not be used to implement any kind of
+ * 		security mechanism because of TOC-TOU attacks, but rather to
+ * 		debug, divert, and manipulate execution of semi-cooperative
+ * 		processes.
+ *
+ * 		Keep in mind that this feature is meant for experiments, and it
+ * 		has a risk of crashing the system and running programs.
+ * 		Therefore, when an eBPF program using this helper is attached,
+ * 		a warning including PID and process name is printed to kernel
+ * 		logs.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_current_task_under_cgroup(struct bpf_map *map, u32 index)
+ * 	Description
+ * 		Check whether the probe is being run is the context of a given
+ * 		subset of the cgroup2 hierarchy. The cgroup2 to test is held by
+ * 		*map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
+ * 	Return
+ * 		The return value depends on the result of the test, and can be:
+ *
+ *		* 1, if current task belongs to the cgroup2.
+ *		* 0, if current task does not belong to the cgroup2.
+ * 		* A negative error code, if an error occurred.
+ *
+ * int bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags)
+ * 	Description
+ * 		Resize (trim or grow) the packet associated to *skb* to the
+ * 		new *len*. The *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		The basic idea is that the helper performs the needed work to
+ * 		change the size of the packet, then the eBPF program rewrites
+ * 		the rest via helpers like **bpf_skb_store_bytes**\ (),
+ * 		**bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ ()
+ * 		and others. This helper is a slow path utility intended for
+ * 		replies with control messages. And because it is targeted for
+ * 		slow path, the helper itself can afford to be slow: it
+ * 		implicitly linearizes, unclones and drops offloads from the
+ * 		*skb*.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_pull_data(struct sk_buff *skb, u32 len)
+ * 	Description
+ * 		Pull in non-linear data in case the *skb* is non-linear and not
+ * 		all of *len* are part of the linear section. Make *len* bytes
+ * 		from *skb* readable and writable. If a zero value is passed for
+ * 		*len*, then the whole length of the *skb* is pulled.
+ *
+ * 		This helper is only needed for reading and writing with direct
+ * 		packet access.
+ *
+ * 		For direct packet access, testing that offsets to access
+ * 		are within packet boundaries (test on *skb*\ **->data_end**) is
+ * 		susceptible to fail if offsets are invalid, or if the requested
+ * 		data is in non-linear parts of the *skb*. On failure the
+ * 		program can just bail out, or in the case of a non-linear
+ * 		buffer, use a helper to make the data available. The
+ * 		**bpf_skb_load_bytes**\ () helper is a first solution to access
+ * 		the data. Another one consists in using **bpf_skb_pull_data**
+ * 		to pull in once the non-linear parts, then retesting and
+ * 		eventually access the data.
+ *
+ * 		At the same time, this also makes sure the *skb* is uncloned,
+ * 		which is a necessary condition for direct write. As this needs
+ * 		to be an invariant for the write part only, the verifier
+ * 		detects writes and adds a prologue that is calling
+ * 		**bpf_skb_pull_data()** to effectively unclone the *skb* from
+ * 		the very beginning in case it is indeed cloned.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * s64 bpf_csum_update(struct sk_buff *skb, __wsum csum)
+ * 	Description
+ * 		Add the checksum *csum* into *skb*\ **->csum** in case the
+ * 		driver has supplied a checksum for the entire packet into that
+ * 		field. Return an error otherwise. This helper is intended to be
+ * 		used in combination with **bpf_csum_diff**\ (), in particular
+ * 		when the checksum needs to be updated after data has been
+ * 		written into the packet through direct packet access.
+ * 	Return
+ * 		The checksum on success, or a negative error code in case of
+ * 		failure.
+ *
+ * void bpf_set_hash_invalid(struct sk_buff *skb)
+ * 	Description
+ * 		Invalidate the current *skb*\ **->hash**. It can be used after
+ * 		mangling on headers through direct packet access, in order to
+ * 		indicate that the hash is outdated and to trigger a
+ * 		recalculation the next time the kernel tries to access this
+ * 		hash or when the **bpf_get_hash_recalc**\ () helper is called.
+ *
+ * int bpf_get_numa_node_id(void)
+ * 	Description
+ * 		Return the id of the current NUMA node. The primary use case
+ * 		for this helper is the selection of sockets for the local NUMA
+ * 		node, when the program is attached to sockets using the
+ * 		**SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**),
+ * 		but the helper is also available to other eBPF program types,
+ * 		similarly to **bpf_get_smp_processor_id**\ ().
+ * 	Return
+ * 		The id of current NUMA node.
+ *
+ * int bpf_skb_change_head(struct sk_buff *skb, u32 len, u64 flags)
+ * 	Description
+ * 		Grows headroom of packet associated to *skb* and adjusts the
+ * 		offset of the MAC header accordingly, adding *len* bytes of
+ * 		space. It automatically extends and reallocates memory as
+ * 		required.
+ *
+ * 		This helper can be used on a layer 3 *skb* to push a MAC header
+ * 		for redirection into a layer 2 device.
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_xdp_adjust_head(struct xdp_buff *xdp_md, int delta)
+ * 	Description
+ * 		Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that
+ * 		it is possible to use a negative value for *delta*. This helper
+ * 		can be used to prepare the packet for pushing or popping
+ * 		headers.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_probe_read_str(void *dst, int size, const void *unsafe_ptr)
+ * 	Description
+ * 		Copy a NUL terminated string from an unsafe address
+ * 		*unsafe_ptr* to *dst*. The *size* should include the
+ * 		terminating NUL byte. In case the string length is smaller than
+ * 		*size*, the target is not padded with further NUL bytes. If the
+ * 		string length is larger than *size*, just *size*-1 bytes are
+ * 		copied and the last byte is set to NUL.
+ *
+ * 		On success, the length of the copied string is returned. This
+ * 		makes this helper useful in tracing programs for reading
+ * 		strings, and more importantly to get its length at runtime. See
+ * 		the following snippet:
+ *
+ * 		::
+ *
+ * 			SEC("kprobe/sys_open")
+ * 			void bpf_sys_open(struct pt_regs *ctx)
+ * 			{
+ * 			        char buf[PATHLEN]; // PATHLEN is defined to 256
+ * 			        int res = bpf_probe_read_str(buf, sizeof(buf),
+ * 				                             ctx->di);
+ *
+ * 				// Consume buf, for example push it to
+ * 				// userspace via bpf_perf_event_output(); we
+ * 				// can use res (the string length) as event
+ * 				// size, after checking its boundaries.
+ * 			}
+ *
+ * 		In comparison, using **bpf_probe_read()** helper here instead
+ * 		to read the string would require to estimate the length at
+ * 		compile time, and would often result in copying more memory
+ * 		than necessary.
+ *
+ * 		Another useful use case is when parsing individual process
+ * 		arguments or individual environment variables navigating
+ * 		*current*\ **->mm->arg_start** and *current*\
+ * 		**->mm->env_start**: using this helper and the return value,
+ * 		one can quickly iterate at the right offset of the memory area.
+ * 	Return
+ * 		On success, the strictly positive length of the string,
+ * 		including the trailing NUL character. On error, a negative
+ * 		value.
+ *
+ * u64 bpf_get_socket_cookie(struct sk_buff *skb)
+ * 	Description
+ * 		If the **struct sk_buff** pointed by *skb* has a known socket,
+ * 		retrieve the cookie (generated by the kernel) of this socket.
+ * 		If no cookie has been set yet, generate a new cookie. Once
+ * 		generated, the socket cookie remains stable for the life of the
+ * 		socket. This helper can be useful for monitoring per socket
+ * 		networking traffic statistics as it provides a unique socket
+ * 		identifier per namespace.
+ * 	Return
+ * 		A 8-byte long non-decreasing number on success, or 0 if the
+ * 		socket field is missing inside *skb*.
+ *
+ * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx)
+ * 	Description
+ * 		Equivalent to bpf_get_socket_cookie() helper that accepts
+ * 		*skb*, but gets socket from **struct bpf_sock_addr** contex.
+ * 	Return
+ * 		A 8-byte long non-decreasing number.
+ *
+ * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx)
+ * 	Description
+ * 		Equivalent to bpf_get_socket_cookie() helper that accepts
+ * 		*skb*, but gets socket from **struct bpf_sock_ops** contex.
+ * 	Return
+ * 		A 8-byte long non-decreasing number.
+ *
+ * u32 bpf_get_socket_uid(struct sk_buff *skb)
+ * 	Return
+ * 		The owner UID of the socket associated to *skb*. If the socket
+ * 		is **NULL**, or if it is not a full socket (i.e. if it is a
+ * 		time-wait or a request socket instead), **overflowuid** value
+ * 		is returned (note that **overflowuid** might also be the actual
+ * 		UID value for the socket).
+ *
+ * u32 bpf_set_hash(struct sk_buff *skb, u32 hash)
+ * 	Description
+ * 		Set the full hash for *skb* (set the field *skb*\ **->hash**)
+ * 		to value *hash*.
+ * 	Return
+ * 		0
+ *
+ * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen)
+ * 	Description
+ * 		Emulate a call to **setsockopt()** on the socket associated to
+ * 		*bpf_socket*, which must be a full socket. The *level* at
+ * 		which the option resides and the name *optname* of the option
+ * 		must be specified, see **setsockopt(2)** for more information.
+ * 		The option value of length *optlen* is pointed by *optval*.
+ *
+ * 		This helper actually implements a subset of **setsockopt()**.
+ * 		It supports the following *level*\ s:
+ *
+ * 		* **SOL_SOCKET**, which supports the following *optname*\ s:
+ * 		  **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**,
+ * 		  **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**.
+ * 		* **IPPROTO_TCP**, which supports the following *optname*\ s:
+ * 		  **TCP_CONGESTION**, **TCP_BPF_IW**,
+ * 		  **TCP_BPF_SNDCWND_CLAMP**.
+ * 		* **IPPROTO_IP**, which supports *optname* **IP_TOS**.
+ * 		* **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_adjust_room(struct sk_buff *skb, u32 len_diff, u32 mode, u64 flags)
+ * 	Description
+ * 		Grow or shrink the room for data in the packet associated to
+ * 		*skb* by *len_diff*, and according to the selected *mode*.
+ *
+ * 		There is a single supported mode at this time:
+ *
+ * 		* **BPF_ADJ_ROOM_NET**: Adjust room at the network layer
+ * 		  (room space is added or removed below the layer 3 header).
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags)
+ * 	Description
+ * 		Redirect the packet to the endpoint referenced by *map* at
+ * 		index *key*. Depending on its type, this *map* can contain
+ * 		references to net devices (for forwarding packets through other
+ * 		ports), or to CPUs (for redirecting XDP frames to another CPU;
+ * 		but this is only implemented for native XDP (with driver
+ * 		support) as of this writing).
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		When used to redirect packets to net devices, this helper
+ * 		provides a high performance increase over **bpf_redirect**\ ().
+ * 		This is due to various implementation details of the underlying
+ * 		mechanisms, one of which is the fact that **bpf_redirect_map**\
+ * 		() tries to send packet as a "bulk" to the device.
+ * 	Return
+ * 		**XDP_REDIRECT** on success, or **XDP_ABORTED** on error.
+ *
+ * int bpf_sk_redirect_map(struct bpf_map *map, u32 key, u64 flags)
+ * 	Description
+ * 		Redirect the packet to the socket referenced by *map* (of type
+ * 		**BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
+ * 		egress interfaces can be used for redirection. The
+ * 		**BPF_F_INGRESS** value in *flags* is used to make the
+ * 		distinction (ingress path is selected if the flag is present,
+ * 		egress path otherwise). This is the only flag supported for now.
+ * 	Return
+ * 		**SK_PASS** on success, or **SK_DROP** on error.
+ *
+ * int bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
+ * 	Description
+ * 		Add an entry to, or update a *map* referencing sockets. The
+ * 		*skops* is used as a new value for the entry associated to
+ * 		*key*. *flags* is one of:
+ *
+ * 		**BPF_NOEXIST**
+ * 			The entry for *key* must not exist in the map.
+ * 		**BPF_EXIST**
+ * 			The entry for *key* must already exist in the map.
+ * 		**BPF_ANY**
+ * 			No condition on the existence of the entry for *key*.
+ *
+ * 		If the *map* has eBPF programs (parser and verdict), those will
+ * 		be inherited by the socket being added. If the socket is
+ * 		already attached to eBPF programs, this results in an error.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_xdp_adjust_meta(struct xdp_buff *xdp_md, int delta)
+ * 	Description
+ * 		Adjust the address pointed by *xdp_md*\ **->data_meta** by
+ * 		*delta* (which can be positive or negative). Note that this
+ * 		operation modifies the address stored in *xdp_md*\ **->data**,
+ * 		so the latter must be loaded only after the helper has been
+ * 		called.
+ *
+ * 		The use of *xdp_md*\ **->data_meta** is optional and programs
+ * 		are not required to use it. The rationale is that when the
+ * 		packet is processed with XDP (e.g. as DoS filter), it is
+ * 		possible to push further meta data along with it before passing
+ * 		to the stack, and to give the guarantee that an ingress eBPF
+ * 		program attached as a TC classifier on the same device can pick
+ * 		this up for further post-processing. Since TC works with socket
+ * 		buffers, it remains possible to set from XDP the **mark** or
+ * 		**priority** pointers, or other pointers for the socket buffer.
+ * 		Having this scratch space generic and programmable allows for
+ * 		more flexibility as the user is free to store whatever meta
+ * 		data they need.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_perf_event_read_value(struct bpf_map *map, u64 flags, struct bpf_perf_event_value *buf, u32 buf_size)
+ * 	Description
+ * 		Read the value of a perf event counter, and store it into *buf*
+ * 		of size *buf_size*. This helper relies on a *map* of type
+ * 		**BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event
+ * 		counter is selected when *map* is updated with perf event file
+ * 		descriptors. The *map* is an array whose size is the number of
+ * 		available CPUs, and each cell contains a value relative to one
+ * 		CPU. The value to retrieve is indicated by *flags*, that
+ * 		contains the index of the CPU to look up, masked with
+ * 		**BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
+ * 		**BPF_F_CURRENT_CPU** to indicate that the value for the
+ * 		current CPU should be retrieved.
+ *
+ * 		This helper behaves in a way close to
+ * 		**bpf_perf_event_read**\ () helper, save that instead of
+ * 		just returning the value observed, it fills the *buf*
+ * 		structure. This allows for additional data to be retrieved: in
+ * 		particular, the enabled and running times (in *buf*\
+ * 		**->enabled** and *buf*\ **->running**, respectively) are
+ * 		copied. In general, **bpf_perf_event_read_value**\ () is
+ * 		recommended over **bpf_perf_event_read**\ (), which has some
+ * 		ABI issues and provides fewer functionalities.
+ *
+ * 		These values are interesting, because hardware PMU (Performance
+ * 		Monitoring Unit) counters are limited resources. When there are
+ * 		more PMU based perf events opened than available counters,
+ * 		kernel will multiplex these events so each event gets certain
+ * 		percentage (but not all) of the PMU time. In case that
+ * 		multiplexing happens, the number of samples or counter value
+ * 		will not reflect the case compared to when no multiplexing
+ * 		occurs. This makes comparison between different runs difficult.
+ * 		Typically, the counter value should be normalized before
+ * 		comparing to other experiments. The usual normalization is done
+ * 		as follows.
+ *
+ * 		::
+ *
+ * 			normalized_counter = counter * t_enabled / t_running
+ *
+ * 		Where t_enabled is the time enabled for event and t_running is
+ * 		the time running for event since last normalization. The
+ * 		enabled and running times are accumulated since the perf event
+ * 		open. To achieve scaling factor between two invocations of an
+ * 		eBPF program, users can can use CPU id as the key (which is
+ * 		typical for perf array usage model) to remember the previous
+ * 		value and do the calculation inside the eBPF program.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size)
+ * 	Description
+ * 		For en eBPF program attached to a perf event, retrieve the
+ * 		value of the event counter associated to *ctx* and store it in
+ * 		the structure pointed by *buf* and of size *buf_size*. Enabled
+ * 		and running times are also stored in the structure (see
+ * 		description of helper **bpf_perf_event_read_value**\ () for
+ * 		more details).
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen)
+ * 	Description
+ * 		Emulate a call to **getsockopt()** on the socket associated to
+ * 		*bpf_socket*, which must be a full socket. The *level* at
+ * 		which the option resides and the name *optname* of the option
+ * 		must be specified, see **getsockopt(2)** for more information.
+ * 		The retrieved value is stored in the structure pointed by
+ * 		*opval* and of length *optlen*.
+ *
+ * 		This helper actually implements a subset of **getsockopt()**.
+ * 		It supports the following *level*\ s:
+ *
+ * 		* **IPPROTO_TCP**, which supports *optname*
+ * 		  **TCP_CONGESTION**.
+ * 		* **IPPROTO_IP**, which supports *optname* **IP_TOS**.
+ * 		* **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_override_return(struct pt_reg *regs, u64 rc)
+ * 	Description
+ * 		Used for error injection, this helper uses kprobes to override
+ * 		the return value of the probed function, and to set it to *rc*.
+ * 		The first argument is the context *regs* on which the kprobe
+ * 		works.
+ *
+ * 		This helper works by setting setting the PC (program counter)
+ * 		to an override function which is run in place of the original
+ * 		probed function. This means the probed function is not run at
+ * 		all. The replacement function just returns with the required
+ * 		value.
+ *
+ * 		This helper has security implications, and thus is subject to
+ * 		restrictions. It is only available if the kernel was compiled
+ * 		with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration
+ * 		option, and in this case it only works on functions tagged with
+ * 		**ALLOW_ERROR_INJECTION** in the kernel code.
+ *
+ * 		Also, the helper is only available for the architectures having
+ * 		the CONFIG_FUNCTION_ERROR_INJECTION option. As of this writing,
+ * 		x86 architecture is the only one to support this feature.
+ * 	Return
+ * 		0
+ *
+ * int bpf_sock_ops_cb_flags_set(struct bpf_sock_ops *bpf_sock, int argval)
+ * 	Description
+ * 		Attempt to set the value of the **bpf_sock_ops_cb_flags** field
+ * 		for the full TCP socket associated to *bpf_sock_ops* to
+ * 		*argval*.
+ *
+ * 		The primary use of this field is to determine if there should
+ * 		be calls to eBPF programs of type
+ * 		**BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP
+ * 		code. A program of the same type can change its value, per
+ * 		connection and as necessary, when the connection is
+ * 		established. This field is directly accessible for reading, but
+ * 		this helper must be used for updates in order to return an
+ * 		error if an eBPF program tries to set a callback that is not
+ * 		supported in the current kernel.
+ *
+ * 		The supported callback values that *argval* can combine are:
+ *
+ * 		* **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out)
+ * 		* **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission)
+ * 		* **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change)
+ *
+ * 		Here are some examples of where one could call such eBPF
+ * 		program:
+ *
+ * 		* When RTO fires.
+ * 		* When a packet is retransmitted.
+ * 		* When the connection terminates.
+ * 		* When a packet is sent.
+ * 		* When a packet is received.
+ * 	Return
+ * 		Code **-EINVAL** if the socket is not a full TCP socket;
+ * 		otherwise, a positive number containing the bits that could not
+ * 		be set is returned (which comes down to 0 if all bits were set
+ * 		as required).
+ *
+ * int bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags)
+ * 	Description
+ * 		This helper is used in programs implementing policies at the
+ * 		socket level. If the message *msg* is allowed to pass (i.e. if
+ * 		the verdict eBPF program returns **SK_PASS**), redirect it to
+ * 		the socket referenced by *map* (of type
+ * 		**BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
+ * 		egress interfaces can be used for redirection. The
+ * 		**BPF_F_INGRESS** value in *flags* is used to make the
+ * 		distinction (ingress path is selected if the flag is present,
+ * 		egress path otherwise). This is the only flag supported for now.
+ * 	Return
+ * 		**SK_PASS** on success, or **SK_DROP** on error.
+ *
+ * int bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes)
+ * 	Description
+ * 		For socket policies, apply the verdict of the eBPF program to
+ * 		the next *bytes* (number of bytes) of message *msg*.
+ *
+ * 		For example, this helper can be used in the following cases:
+ *
+ * 		* A single **sendmsg**\ () or **sendfile**\ () system call
+ * 		  contains multiple logical messages that the eBPF program is
+ * 		  supposed to read and for which it should apply a verdict.
+ * 		* An eBPF program only cares to read the first *bytes* of a
+ * 		  *msg*. If the message has a large payload, then setting up
+ * 		  and calling the eBPF program repeatedly for all bytes, even
+ * 		  though the verdict is already known, would create unnecessary
+ * 		  overhead.
+ *
+ * 		When called from within an eBPF program, the helper sets a
+ * 		counter internal to the BPF infrastructure, that is used to
+ * 		apply the last verdict to the next *bytes*. If *bytes* is
+ * 		smaller than the current data being processed from a
+ * 		**sendmsg**\ () or **sendfile**\ () system call, the first
+ * 		*bytes* will be sent and the eBPF program will be re-run with
+ * 		the pointer for start of data pointing to byte number *bytes*
+ * 		**+ 1**. If *bytes* is larger than the current data being
+ * 		processed, then the eBPF verdict will be applied to multiple
+ * 		**sendmsg**\ () or **sendfile**\ () calls until *bytes* are
+ * 		consumed.
+ *
+ * 		Note that if a socket closes with the internal counter holding
+ * 		a non-zero value, this is not a problem because data is not
+ * 		being buffered for *bytes* and is sent as it is received.
+ * 	Return
+ * 		0
+ *
+ * int bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes)
+ * 	Description
+ * 		For socket policies, prevent the execution of the verdict eBPF
+ * 		program for message *msg* until *bytes* (byte number) have been
+ * 		accumulated.
+ *
+ * 		This can be used when one needs a specific number of bytes
+ * 		before a verdict can be assigned, even if the data spans
+ * 		multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme
+ * 		case would be a user calling **sendmsg**\ () repeatedly with
+ * 		1-byte long message segments. Obviously, this is bad for
+ * 		performance, but it is still valid. If the eBPF program needs
+ * 		*bytes* bytes to validate a header, this helper can be used to
+ * 		prevent the eBPF program to be called again until *bytes* have
+ * 		been accumulated.
+ * 	Return
+ * 		0
+ *
+ * int bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags)
+ * 	Description
+ * 		For socket policies, pull in non-linear data from user space
+ * 		for *msg* and set pointers *msg*\ **->data** and *msg*\
+ * 		**->data_end** to *start* and *end* bytes offsets into *msg*,
+ * 		respectively.
+ *
+ * 		If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
+ * 		*msg* it can only parse data that the (**data**, **data_end**)
+ * 		pointers have already consumed. For **sendmsg**\ () hooks this
+ * 		is likely the first scatterlist element. But for calls relying
+ * 		on the **sendpage** handler (e.g. **sendfile**\ ()) this will
+ * 		be the range (**0**, **0**) because the data is shared with
+ * 		user space and by default the objective is to avoid allowing
+ * 		user space to modify data while (or after) eBPF verdict is
+ * 		being decided. This helper can be used to pull in data and to
+ * 		set the start and end pointer to given values. Data will be
+ * 		copied if necessary (i.e. if data was not linear and if start
+ * 		and end pointers do not point to the same chunk).
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_bind(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len)
+ * 	Description
+ * 		Bind the socket associated to *ctx* to the address pointed by
+ * 		*addr*, of length *addr_len*. This allows for making outgoing
+ * 		connection from the desired IP address, which can be useful for
+ * 		example when all processes inside a cgroup should use one
+ * 		single IP address on a host that has multiple IP configured.
+ *
+ * 		This helper works for IPv4 and IPv6, TCP and UDP sockets. The
+ * 		domain (*addr*\ **->sa_family**) must be **AF_INET** (or
+ * 		**AF_INET6**). Looking for a free port to bind to can be
+ * 		expensive, therefore binding to port is not permitted by the
+ * 		helper: *addr*\ **->sin_port** (or **sin6_port**, respectively)
+ * 		must be set to zero.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta)
+ * 	Description
+ * 		Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is
+ * 		only possible to shrink the packet as of this writing,
+ * 		therefore *delta* must be a negative integer.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_skb_get_xfrm_state(struct sk_buff *skb, u32 index, struct bpf_xfrm_state *xfrm_state, u32 size, u64 flags)
+ * 	Description
+ * 		Retrieve the XFRM state (IP transform framework, see also
+ * 		**ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*.
+ *
+ * 		The retrieved value is stored in the **struct bpf_xfrm_state**
+ * 		pointed by *xfrm_state* and of length *size*.
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ *
+ * 		This helper is available only if the kernel was compiled with
+ * 		**CONFIG_XFRM** configuration option.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_get_stack(struct pt_regs *regs, void *buf, u32 size, u64 flags)
+ * 	Description
+ * 		Return a user or a kernel stack in bpf program provided buffer.
+ * 		To achieve this, the helper needs *ctx*, which is a pointer
+ * 		to the context on which the tracing program is executed.
+ * 		To store the stacktrace, the bpf program provides *buf* with
+ * 		a nonnegative *size*.
+ *
+ * 		The last argument, *flags*, holds the number of stack frames to
+ * 		skip (from 0 to 255), masked with
+ * 		**BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
+ * 		the following flags:
+ *
+ * 		**BPF_F_USER_STACK**
+ * 			Collect a user space stack instead of a kernel stack.
+ * 		**BPF_F_USER_BUILD_ID**
+ * 			Collect buildid+offset instead of ips for user stack,
+ * 			only valid if **BPF_F_USER_STACK** is also specified.
+ *
+ * 		**bpf_get_stack**\ () can collect up to
+ * 		**PERF_MAX_STACK_DEPTH** both kernel and user frames, subject
+ * 		to sufficient large buffer size. Note that
+ * 		this limit can be controlled with the **sysctl** program, and
+ * 		that it should be manually increased in order to profile long
+ * 		user stacks (such as stacks for Java programs). To do so, use:
+ *
+ * 		::
+ *
+ * 			# sysctl kernel.perf_event_max_stack=<new value>
+ * 	Return
+ * 		A non-negative value equal to or less than *size* on success,
+ * 		or a negative error in case of failure.
+ *
+ * int bpf_skb_load_bytes_relative(const struct sk_buff *skb, u32 offset, void *to, u32 len, u32 start_header)
+ * 	Description
+ * 		This helper is similar to **bpf_skb_load_bytes**\ () in that
+ * 		it provides an easy way to load *len* bytes from *offset*
+ * 		from the packet associated to *skb*, into the buffer pointed
+ * 		by *to*. The difference to **bpf_skb_load_bytes**\ () is that
+ * 		a fifth argument *start_header* exists in order to select a
+ * 		base offset to start from. *start_header* can be one of:
+ *
+ * 		**BPF_HDR_START_MAC**
+ * 			Base offset to load data from is *skb*'s mac header.
+ * 		**BPF_HDR_START_NET**
+ * 			Base offset to load data from is *skb*'s network header.
+ *
+ * 		In general, "direct packet access" is the preferred method to
+ * 		access packet data, however, this helper is in particular useful
+ * 		in socket filters where *skb*\ **->data** does not always point
+ * 		to the start of the mac header and where "direct packet access"
+ * 		is not available.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags)
+ *	Description
+ *		Do FIB lookup in kernel tables using parameters in *params*.
+ *		If lookup is successful and result shows packet is to be
+ *		forwarded, the neighbor tables are searched for the nexthop.
+ *		If successful (ie., FIB lookup shows forwarding and nexthop
+ *		is resolved), the nexthop address is returned in ipv4_dst
+ *		or ipv6_dst based on family, smac is set to mac address of
+ *		egress device, dmac is set to nexthop mac address, rt_metric
+ *		is set to metric from route (IPv4/IPv6 only), and ifindex
+ *		is set to the device index of the nexthop from the FIB lookup.
+ *
+ *             *plen* argument is the size of the passed in struct.
+ *             *flags* argument can be a combination of one or more of the
+ *             following values:
+ *
+ *		**BPF_FIB_LOOKUP_DIRECT**
+ *			Do a direct table lookup vs full lookup using FIB
+ *			rules.
+ *		**BPF_FIB_LOOKUP_OUTPUT**
+ *			Perform lookup from an egress perspective (default is
+ *			ingress).
+ *
+ *             *ctx* is either **struct xdp_md** for XDP programs or
+ *             **struct sk_buff** tc cls_act programs.
+ *     Return
+ *		* < 0 if any input argument is invalid
+ *		*   0 on success (packet is forwarded, nexthop neighbor exists)
+ *		* > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the
+ *		  packet is not forwarded or needs assist from full stack
+ *
+ * int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags)
+ *	Description
+ *		Add an entry to, or update a sockhash *map* referencing sockets.
+ *		The *skops* is used as a new value for the entry associated to
+ *		*key*. *flags* is one of:
+ *
+ *		**BPF_NOEXIST**
+ *			The entry for *key* must not exist in the map.
+ *		**BPF_EXIST**
+ *			The entry for *key* must already exist in the map.
+ *		**BPF_ANY**
+ *			No condition on the existence of the entry for *key*.
+ *
+ *		If the *map* has eBPF programs (parser and verdict), those will
+ *		be inherited by the socket being added. If the socket is
+ *		already attached to eBPF programs, this results in an error.
+ *	Return
+ *		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags)
+ *	Description
+ *		This helper is used in programs implementing policies at the
+ *		socket level. If the message *msg* is allowed to pass (i.e. if
+ *		the verdict eBPF program returns **SK_PASS**), redirect it to
+ *		the socket referenced by *map* (of type
+ *		**BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
+ *		egress interfaces can be used for redirection. The
+ *		**BPF_F_INGRESS** value in *flags* is used to make the
+ *		distinction (ingress path is selected if the flag is present,
+ *		egress path otherwise). This is the only flag supported for now.
+ *	Return
+ *		**SK_PASS** on success, or **SK_DROP** on error.
+ *
+ * int bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags)
+ *	Description
+ *		This helper is used in programs implementing policies at the
+ *		skb socket level. If the sk_buff *skb* is allowed to pass (i.e.
+ *		if the verdeict eBPF program returns **SK_PASS**), redirect it
+ *		to the socket referenced by *map* (of type
+ *		**BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
+ *		egress interfaces can be used for redirection. The
+ *		**BPF_F_INGRESS** value in *flags* is used to make the
+ *		distinction (ingress path is selected if the flag is present,
+ *		egress otherwise). This is the only flag supported for now.
+ *	Return
+ *		**SK_PASS** on success, or **SK_DROP** on error.
+ *
+ * int bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len)
+ *	Description
+ *		Encapsulate the packet associated to *skb* within a Layer 3
+ *		protocol header. This header is provided in the buffer at
+ *		address *hdr*, with *len* its size in bytes. *type* indicates
+ *		the protocol of the header and can be one of:
+ *
+ *		**BPF_LWT_ENCAP_SEG6**
+ *			IPv6 encapsulation with Segment Routing Header
+ *			(**struct ipv6_sr_hdr**). *hdr* only contains the SRH,
+ *			the IPv6 header is computed by the kernel.
+ *		**BPF_LWT_ENCAP_SEG6_INLINE**
+ *			Only works if *skb* contains an IPv6 packet. Insert a
+ *			Segment Routing Header (**struct ipv6_sr_hdr**) inside
+ *			the IPv6 header.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ *	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len)
+ *	Description
+ *		Store *len* bytes from address *from* into the packet
+ *		associated to *skb*, at *offset*. Only the flags, tag and TLVs
+ *		inside the outermost IPv6 Segment Routing Header can be
+ *		modified through this helper.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ *	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta)
+ *	Description
+ *		Adjust the size allocated to TLVs in the outermost IPv6
+ *		Segment Routing Header contained in the packet associated to
+ *		*skb*, at position *offset* by *delta* bytes. Only offsets
+ *		after the segments are accepted. *delta* can be as well
+ *		positive (growing) as negative (shrinking).
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ *	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len)
+ *	Description
+ *		Apply an IPv6 Segment Routing action of type *action* to the
+ *		packet associated to *skb*. Each action takes a parameter
+ *		contained at address *param*, and of length *param_len* bytes.
+ *		*action* can be one of:
+ *
+ *		**SEG6_LOCAL_ACTION_END_X**
+ *			End.X action: Endpoint with Layer-3 cross-connect.
+ *			Type of *param*: **struct in6_addr**.
+ *		**SEG6_LOCAL_ACTION_END_T**
+ *			End.T action: Endpoint with specific IPv6 table lookup.
+ *			Type of *param*: **int**.
+ *		**SEG6_LOCAL_ACTION_END_B6**
+ *			End.B6 action: Endpoint bound to an SRv6 policy.
+ *			Type of param: **struct ipv6_sr_hdr**.
+ *		**SEG6_LOCAL_ACTION_END_B6_ENCAP**
+ *			End.B6.Encap action: Endpoint bound to an SRv6
+ *			encapsulation policy.
+ *			Type of param: **struct ipv6_sr_hdr**.
+ *
+ * 		A call to this helper is susceptible to change the underlaying
+ * 		packet buffer. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again, if the helper is used in combination with
+ * 		direct packet access.
+ *	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
+ * int bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle)
+ *	Description
+ *		This helper is used in programs implementing IR decoding, to
+ *		report a successfully decoded key press with *scancode*,
+ *		*toggle* value in the given *protocol*. The scancode will be
+ *		translated to a keycode using the rc keymap, and reported as
+ *		an input key down event. After a period a key up event is
+ *		generated. This period can be extended by calling either
+ *		**bpf_rc_keydown** () again with the same values, or calling
+ *		**bpf_rc_repeat** ().
+ *
+ *		Some protocols include a toggle bit, in case the button	was
+ *		released and pressed again between consecutive scancodes.
+ *
+ *		The *ctx* should point to the lirc sample as passed into
+ *		the program.
+ *
+ *		The *protocol* is the decoded protocol number (see
+ *		**enum rc_proto** for some predefined values).
+ *
+ *		This helper is only available is the kernel was compiled with
+ *		the **CONFIG_BPF_LIRC_MODE2** configuration option set to
+ *		"**y**".
+ *	Return
+ *		0
+ *
+ * int bpf_rc_repeat(void *ctx)
+ *	Description
+ *		This helper is used in programs implementing IR decoding, to
+ *		report a successfully decoded repeat key message. This delays
+ *		the generation of a key up event for previously generated
+ *		key down event.
+ *
+ *		Some IR protocols like NEC have a special IR message for
+ *		repeating last button, for when a button is held down.
+ *
+ *		The *ctx* should point to the lirc sample as passed into
+ *		the program.
+ *
+ *		This helper is only available is the kernel was compiled with
+ *		the **CONFIG_BPF_LIRC_MODE2** configuration option set to
+ *		"**y**".
+ *	Return
+ *		0
+ *
+ * uint64_t bpf_skb_cgroup_id(struct sk_buff *skb)
+ * 	Description
+ * 		Return the cgroup v2 id of the socket associated with the *skb*.
+ * 		This is roughly similar to the **bpf_get_cgroup_classid**\ ()
+ * 		helper for cgroup v1 by providing a tag resp. identifier that
+ * 		can be matched on or used for map lookups e.g. to implement
+ * 		policy. The cgroup v2 id of a given path in the hierarchy is
+ * 		exposed in user space through the f_handle API in order to get
+ * 		to the same 64-bit id.
+ *
+ * 		This helper can be used on TC egress path, but not on ingress,
+ * 		and is available only if the kernel was compiled with the
+ * 		**CONFIG_SOCK_CGROUP_DATA** configuration option.
+ * 	Return
+ * 		The id is returned or 0 in case the id could not be retrieved.
+ *
+ * u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level)
+ *	Description
+ *		Return id of cgroup v2 that is ancestor of cgroup associated
+ *		with the *skb* at the *ancestor_level*.  The root cgroup is at
+ *		*ancestor_level* zero and each step down the hierarchy
+ *		increments the level. If *ancestor_level* == level of cgroup
+ *		associated with *skb*, then return value will be same as that
+ *		of **bpf_skb_cgroup_id**\ ().
+ *
+ *		The helper is useful to implement policies based on cgroups
+ *		that are upper in hierarchy than immediate cgroup associated
+ *		with *skb*.
+ *
+ *		The format of returned id and helper limitations are same as in
+ *		**bpf_skb_cgroup_id**\ ().
+ *	Return
+ *		The id is returned or 0 in case the id could not be retrieved.
+ *
+ * u64 bpf_get_current_cgroup_id(void)
+ * 	Return
+ * 		A 64-bit integer containing the current cgroup id based
+ * 		on the cgroup within which the current task is running.
+ *
+ * void* get_local_storage(void *map, u64 flags)
+ *	Description
+ *		Get the pointer to the local storage area.
+ *		The type and the size of the local storage is defined
+ *		by the *map* argument.
+ *		The *flags* meaning is specific for each map type,
+ *		and has to be 0 for cgroup local storage.
+ *
+ *		Depending on the bpf program type, a local storage area
+ *		can be shared between multiple instances of the bpf program,
+ *		running simultaneously.
+ *
+ *		A user should care about the synchronization by himself.
+ *		For example, by using the BPF_STX_XADD instruction to alter
+ *		the shared data.
+ *	Return
+ *		Pointer to the local storage area.
+ *
+ * int bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags)
+ *	Description
+ *		Select a SO_REUSEPORT sk from a	BPF_MAP_TYPE_REUSEPORT_ARRAY map
+ *		It checks the selected sk is matching the incoming
+ *		request in the skb.
+ *	Return
+ *		0 on success, or a negative error in case of failure.
+ */
+#define __BPF_FUNC_MAPPER(FN)		\
+	FN(unspec),			\
+	FN(map_lookup_elem),		\
+	FN(map_update_elem),		\
+	FN(map_delete_elem),		\
+	FN(probe_read),			\
+	FN(ktime_get_ns),		\
+	FN(trace_printk),		\
+	FN(get_prandom_u32),		\
+	FN(get_smp_processor_id),	\
+	FN(skb_store_bytes),		\
+	FN(l3_csum_replace),		\
+	FN(l4_csum_replace),		\
+	FN(tail_call),			\
+	FN(clone_redirect),		\
+	FN(get_current_pid_tgid),	\
+	FN(get_current_uid_gid),	\
+	FN(get_current_comm),		\
+	FN(get_cgroup_classid),		\
+	FN(skb_vlan_push),		\
+	FN(skb_vlan_pop),		\
+	FN(skb_get_tunnel_key),		\
+	FN(skb_set_tunnel_key),		\
+	FN(perf_event_read),		\
+	FN(redirect),			\
+	FN(get_route_realm),		\
+	FN(perf_event_output),		\
+	FN(skb_load_bytes),		\
+	FN(get_stackid),		\
+	FN(csum_diff),			\
+	FN(skb_get_tunnel_opt),		\
+	FN(skb_set_tunnel_opt),		\
+	FN(skb_change_proto),		\
+	FN(skb_change_type),		\
+	FN(skb_under_cgroup),		\
+	FN(get_hash_recalc),		\
+	FN(get_current_task),		\
+	FN(probe_write_user),		\
+	FN(current_task_under_cgroup),	\
+	FN(skb_change_tail),		\
+	FN(skb_pull_data),		\
+	FN(csum_update),		\
+	FN(set_hash_invalid),		\
+	FN(get_numa_node_id),		\
+	FN(skb_change_head),		\
+	FN(xdp_adjust_head),		\
+	FN(probe_read_str),		\
+	FN(get_socket_cookie),		\
+	FN(get_socket_uid),		\
+	FN(set_hash),			\
+	FN(setsockopt),			\
+	FN(skb_adjust_room),		\
+	FN(redirect_map),		\
+	FN(sk_redirect_map),		\
+	FN(sock_map_update),		\
+	FN(xdp_adjust_meta),		\
+	FN(perf_event_read_value),	\
+	FN(perf_prog_read_value),	\
+	FN(getsockopt),			\
+	FN(override_return),		\
+	FN(sock_ops_cb_flags_set),	\
+	FN(msg_redirect_map),		\
+	FN(msg_apply_bytes),		\
+	FN(msg_cork_bytes),		\
+	FN(msg_pull_data),		\
+	FN(bind),			\
+	FN(xdp_adjust_tail),		\
+	FN(skb_get_xfrm_state),		\
+	FN(get_stack),			\
+	FN(skb_load_bytes_relative),	\
+	FN(fib_lookup),			\
+	FN(sock_hash_update),		\
+	FN(msg_redirect_hash),		\
+	FN(sk_redirect_hash),		\
+	FN(lwt_push_encap),		\
+	FN(lwt_seg6_store_bytes),	\
+	FN(lwt_seg6_adjust_srh),	\
+	FN(lwt_seg6_action),		\
+	FN(rc_repeat),			\
+	FN(rc_keydown),			\
+	FN(skb_cgroup_id),		\
+	FN(get_current_cgroup_id),	\
+	FN(get_local_storage),		\
+	FN(sk_select_reuseport),	\
+	FN(skb_ancestor_cgroup_id),
+
+/* integer value in 'imm' field of BPF_CALL instruction selects which helper
+ * function eBPF program intends to call
+ */
+#define __BPF_ENUM_FN(x) BPF_FUNC_ ## x
+enum bpf_func_id {
+	__BPF_FUNC_MAPPER(__BPF_ENUM_FN)
+	__BPF_FUNC_MAX_ID,
+};
+#undef __BPF_ENUM_FN
+
+/* All flags used by eBPF helper functions, placed here. */
+
+/* BPF_FUNC_skb_store_bytes flags. */
+#define BPF_F_RECOMPUTE_CSUM		(1ULL << 0)
+#define BPF_F_INVALIDATE_HASH		(1ULL << 1)
+
+/* BPF_FUNC_l3_csum_replace and BPF_FUNC_l4_csum_replace flags.
+ * First 4 bits are for passing the header field size.
+ */
+#define BPF_F_HDR_FIELD_MASK		0xfULL
+
+/* BPF_FUNC_l4_csum_replace flags. */
+#define BPF_F_PSEUDO_HDR		(1ULL << 4)
+#define BPF_F_MARK_MANGLED_0		(1ULL << 5)
+#define BPF_F_MARK_ENFORCE		(1ULL << 6)
+
+/* BPF_FUNC_clone_redirect and BPF_FUNC_redirect flags. */
+#define BPF_F_INGRESS			(1ULL << 0)
+
+/* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */
+#define BPF_F_TUNINFO_IPV6		(1ULL << 0)
+
+/* flags for both BPF_FUNC_get_stackid and BPF_FUNC_get_stack. */
+#define BPF_F_SKIP_FIELD_MASK		0xffULL
+#define BPF_F_USER_STACK		(1ULL << 8)
+/* flags used by BPF_FUNC_get_stackid only. */
+#define BPF_F_FAST_STACK_CMP		(1ULL << 9)
+#define BPF_F_REUSE_STACKID		(1ULL << 10)
+/* flags used by BPF_FUNC_get_stack only. */
+#define BPF_F_USER_BUILD_ID		(1ULL << 11)
+
+/* BPF_FUNC_skb_set_tunnel_key flags. */
+#define BPF_F_ZERO_CSUM_TX		(1ULL << 1)
+#define BPF_F_DONT_FRAGMENT		(1ULL << 2)
+#define BPF_F_SEQ_NUMBER		(1ULL << 3)
+
+/* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and
+ * BPF_FUNC_perf_event_read_value flags.
+ */
+#define BPF_F_INDEX_MASK		0xffffffffULL
+#define BPF_F_CURRENT_CPU		BPF_F_INDEX_MASK
+/* BPF_FUNC_perf_event_output for sk_buff input context. */
+#define BPF_F_CTXLEN_MASK		(0xfffffULL << 32)
+
+/* Mode for BPF_FUNC_skb_adjust_room helper. */
+enum bpf_adj_room_mode {
+	BPF_ADJ_ROOM_NET,
+};
+
+/* Mode for BPF_FUNC_skb_load_bytes_relative helper. */
+enum bpf_hdr_start_off {
+	BPF_HDR_START_MAC,
+	BPF_HDR_START_NET,
+};
+
+/* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */
+enum bpf_lwt_encap_mode {
+	BPF_LWT_ENCAP_SEG6,
+	BPF_LWT_ENCAP_SEG6_INLINE
+};
+
+/* user accessible mirror of in-kernel sk_buff.
+ * new fields can only be added to the end of this structure
+ */
+struct __sk_buff {
+	__u32 len;
+	__u32 pkt_type;
+	__u32 mark;
+	__u32 queue_mapping;
+	__u32 protocol;
+	__u32 vlan_present;
+	__u32 vlan_tci;
+	__u32 vlan_proto;
+	__u32 priority;
+	__u32 ingress_ifindex;
+	__u32 ifindex;
+	__u32 tc_index;
+	__u32 cb[5];
+	__u32 hash;
+	__u32 tc_classid;
+	__u32 data;
+	__u32 data_end;
+	__u32 napi_id;
+
+	/* Accessed by BPF_PROG_TYPE_sk_skb types from here to ... */
+	__u32 family;
+	__u32 remote_ip4;	/* Stored in network byte order */
+	__u32 local_ip4;	/* Stored in network byte order */
+	__u32 remote_ip6[4];	/* Stored in network byte order */
+	__u32 local_ip6[4];	/* Stored in network byte order */
+	__u32 remote_port;	/* Stored in network byte order */
+	__u32 local_port;	/* stored in host byte order */
+	/* ... here. */
+
+	__u32 data_meta;
+};
+
+struct bpf_tunnel_key {
+	__u32 tunnel_id;
+	union {
+		__u32 remote_ipv4;
+		__u32 remote_ipv6[4];
+	};
+	__u8 tunnel_tos;
+	__u8 tunnel_ttl;
+	__u16 tunnel_ext;	/* Padding, future use. */
+	__u32 tunnel_label;
+};
+
+/* user accessible mirror of in-kernel xfrm_state.
+ * new fields can only be added to the end of this structure
+ */
+struct bpf_xfrm_state {
+	__u32 reqid;
+	__u32 spi;	/* Stored in network byte order */
+	__u16 family;
+	__u16 ext;	/* Padding, future use. */
+	union {
+		__u32 remote_ipv4;	/* Stored in network byte order */
+		__u32 remote_ipv6[4];	/* Stored in network byte order */
+	};
+};
+
+/* Generic BPF return codes which all BPF program types may support.
+ * The values are binary compatible with their TC_ACT_* counter-part to
+ * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT
+ * programs.
+ *
+ * XDP is handled seprately, see XDP_*.
+ */
+enum bpf_ret_code {
+	BPF_OK = 0,
+	/* 1 reserved */
+	BPF_DROP = 2,
+	/* 3-6 reserved */
+	BPF_REDIRECT = 7,
+	/* >127 are reserved for prog type specific return codes */
+};
+
+struct bpf_sock {
+	__u32 bound_dev_if;
+	__u32 family;
+	__u32 type;
+	__u32 protocol;
+	__u32 mark;
+	__u32 priority;
+	__u32 src_ip4;		/* Allows 1,2,4-byte read.
+				 * Stored in network byte order.
+				 */
+	__u32 src_ip6[4];	/* Allows 1,2,4-byte read.
+				 * Stored in network byte order.
+				 */
+	__u32 src_port;		/* Allows 4-byte read.
+				 * Stored in host byte order
+				 */
+};
+
+#define XDP_PACKET_HEADROOM 256
+
+/* User return codes for XDP prog type.
+ * A valid XDP program must return one of these defined values. All other
+ * return codes are reserved for future use. Unknown return codes will
+ * result in packet drops and a warning via bpf_warn_invalid_xdp_action().
+ */
+enum xdp_action {
+	XDP_ABORTED = 0,
+	XDP_DROP,
+	XDP_PASS,
+	XDP_TX,
+	XDP_REDIRECT,
+};
+
+/* user accessible metadata for XDP packet hook
+ * new fields must be added to the end of this structure
+ */
+struct xdp_md {
+	__u32 data;
+	__u32 data_end;
+	__u32 data_meta;
+	/* Below access go through struct xdp_rxq_info */
+	__u32 ingress_ifindex; /* rxq->dev->ifindex */
+	__u32 rx_queue_index;  /* rxq->queue_index  */
+};
+
+enum sk_action {
+	SK_DROP = 0,
+	SK_PASS,
+};
+
+/* user accessible metadata for SK_MSG packet hook, new fields must
+ * be added to the end of this structure
+ */
+struct sk_msg_md {
+	void *data;
+	void *data_end;
+
+	__u32 family;
+	__u32 remote_ip4;	/* Stored in network byte order */
+	__u32 local_ip4;	/* Stored in network byte order */
+	__u32 remote_ip6[4];	/* Stored in network byte order */
+	__u32 local_ip6[4];	/* Stored in network byte order */
+	__u32 remote_port;	/* Stored in network byte order */
+	__u32 local_port;	/* stored in host byte order */
+};
+
+struct sk_reuseport_md {
+	/*
+	 * Start of directly accessible data. It begins from
+	 * the tcp/udp header.
+	 */
+	void *data;
+	void *data_end;		/* End of directly accessible data */
+	/*
+	 * Total length of packet (starting from the tcp/udp header).
+	 * Note that the directly accessible bytes (data_end - data)
+	 * could be less than this "len".  Those bytes could be
+	 * indirectly read by a helper "bpf_skb_load_bytes()".
+	 */
+	__u32 len;
+	/*
+	 * Eth protocol in the mac header (network byte order). e.g.
+	 * ETH_P_IP(0x0800) and ETH_P_IPV6(0x86DD)
+	 */
+	__u32 eth_protocol;
+	__u32 ip_protocol;	/* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */
+	__u32 bind_inany;	/* Is sock bound to an INANY address? */
+	__u32 hash;		/* A hash of the packet 4 tuples */
+};
+
+#define BPF_TAG_SIZE	8
+
+struct bpf_prog_info {
+	__u32 type;
+	__u32 id;
+	__u8  tag[BPF_TAG_SIZE];
+	__u32 jited_prog_len;
+	__u32 xlated_prog_len;
+	__aligned_u64 jited_prog_insns;
+	__aligned_u64 xlated_prog_insns;
+	__u64 load_time;	/* ns since boottime */
+	__u32 created_by_uid;
+	__u32 nr_map_ids;
+	__aligned_u64 map_ids;
+	char name[BPF_OBJ_NAME_LEN];
+	__u32 ifindex;
+	__u32 gpl_compatible:1;
+	__u32 :31; /* alignment pad */
+	__u64 netns_dev;
+	__u64 netns_ino;
+	__u32 nr_jited_ksyms;
+	__u32 nr_jited_func_lens;
+	__aligned_u64 jited_ksyms;
+	__aligned_u64 jited_func_lens;
+} __attribute__((aligned(8)));
+
+struct bpf_map_info {
+	__u32 type;
+	__u32 id;
+	__u32 key_size;
+	__u32 value_size;
+	__u32 max_entries;
+	__u32 map_flags;
+	char  name[BPF_OBJ_NAME_LEN];
+	__u32 ifindex;
+	__u32 :32;
+	__u64 netns_dev;
+	__u64 netns_ino;
+	__u32 btf_id;
+	__u32 btf_key_type_id;
+	__u32 btf_value_type_id;
+} __attribute__((aligned(8)));
+
+struct bpf_btf_info {
+	__aligned_u64 btf;
+	__u32 btf_size;
+	__u32 id;
+} __attribute__((aligned(8)));
+
+/* User bpf_sock_addr struct to access socket fields and sockaddr struct passed
+ * by user and intended to be used by socket (e.g. to bind to, depends on
+ * attach attach type).
+ */
+struct bpf_sock_addr {
+	__u32 user_family;	/* Allows 4-byte read, but no write. */
+	__u32 user_ip4;		/* Allows 1,2,4-byte read and 4-byte write.
+				 * Stored in network byte order.
+				 */
+	__u32 user_ip6[4];	/* Allows 1,2,4-byte read an 4-byte write.
+				 * Stored in network byte order.
+				 */
+	__u32 user_port;	/* Allows 4-byte read and write.
+				 * Stored in network byte order
+				 */
+	__u32 family;		/* Allows 4-byte read, but no write */
+	__u32 type;		/* Allows 4-byte read, but no write */
+	__u32 protocol;		/* Allows 4-byte read, but no write */
+	__u32 msg_src_ip4;	/* Allows 1,2,4-byte read an 4-byte write.
+				 * Stored in network byte order.
+				 */
+	__u32 msg_src_ip6[4];	/* Allows 1,2,4-byte read an 4-byte write.
+				 * Stored in network byte order.
+				 */
+};
+
+/* User bpf_sock_ops struct to access socket values and specify request ops
+ * and their replies.
+ * Some of this fields are in network (bigendian) byte order and may need
+ * to be converted before use (bpf_ntohl() defined in samples/bpf/bpf_endian.h).
+ * New fields can only be added at the end of this structure
+ */
+struct bpf_sock_ops {
+	__u32 op;
+	union {
+		__u32 args[4];		/* Optionally passed to bpf program */
+		__u32 reply;		/* Returned by bpf program	    */
+		__u32 replylong[4];	/* Optionally returned by bpf prog  */
+	};
+	__u32 family;
+	__u32 remote_ip4;	/* Stored in network byte order */
+	__u32 local_ip4;	/* Stored in network byte order */
+	__u32 remote_ip6[4];	/* Stored in network byte order */
+	__u32 local_ip6[4];	/* Stored in network byte order */
+	__u32 remote_port;	/* Stored in network byte order */
+	__u32 local_port;	/* stored in host byte order */
+	__u32 is_fullsock;	/* Some TCP fields are only valid if
+				 * there is a full socket. If not, the
+				 * fields read as zero.
+				 */
+	__u32 snd_cwnd;
+	__u32 srtt_us;		/* Averaged RTT << 3 in usecs */
+	__u32 bpf_sock_ops_cb_flags; /* flags defined in uapi/linux/tcp.h */
+	__u32 state;
+	__u32 rtt_min;
+	__u32 snd_ssthresh;
+	__u32 rcv_nxt;
+	__u32 snd_nxt;
+	__u32 snd_una;
+	__u32 mss_cache;
+	__u32 ecn_flags;
+	__u32 rate_delivered;
+	__u32 rate_interval_us;
+	__u32 packets_out;
+	__u32 retrans_out;
+	__u32 total_retrans;
+	__u32 segs_in;
+	__u32 data_segs_in;
+	__u32 segs_out;
+	__u32 data_segs_out;
+	__u32 lost_out;
+	__u32 sacked_out;
+	__u32 sk_txhash;
+	__u64 bytes_received;
+	__u64 bytes_acked;
+};
+
+/* Definitions for bpf_sock_ops_cb_flags */
+#define BPF_SOCK_OPS_RTO_CB_FLAG	(1<<0)
+#define BPF_SOCK_OPS_RETRANS_CB_FLAG	(1<<1)
+#define BPF_SOCK_OPS_STATE_CB_FLAG	(1<<2)
+#define BPF_SOCK_OPS_ALL_CB_FLAGS       0x7		/* Mask of all currently
+							 * supported cb flags
+							 */
+
+/* List of known BPF sock_ops operators.
+ * New entries can only be added at the end
+ */
+enum {
+	BPF_SOCK_OPS_VOID,
+	BPF_SOCK_OPS_TIMEOUT_INIT,	/* Should return SYN-RTO value to use or
+					 * -1 if default value should be used
+					 */
+	BPF_SOCK_OPS_RWND_INIT,		/* Should return initial advertized
+					 * window (in packets) or -1 if default
+					 * value should be used
+					 */
+	BPF_SOCK_OPS_TCP_CONNECT_CB,	/* Calls BPF program right before an
+					 * active connection is initialized
+					 */
+	BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB,	/* Calls BPF program when an
+						 * active connection is
+						 * established
+						 */
+	BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB,	/* Calls BPF program when a
+						 * passive connection is
+						 * established
+						 */
+	BPF_SOCK_OPS_NEEDS_ECN,		/* If connection's congestion control
+					 * needs ECN
+					 */
+	BPF_SOCK_OPS_BASE_RTT,		/* Get base RTT. The correct value is
+					 * based on the path and may be
+					 * dependent on the congestion control
+					 * algorithm. In general it indicates
+					 * a congestion threshold. RTTs above
+					 * this indicate congestion
+					 */
+	BPF_SOCK_OPS_RTO_CB,		/* Called when an RTO has triggered.
+					 * Arg1: value of icsk_retransmits
+					 * Arg2: value of icsk_rto
+					 * Arg3: whether RTO has expired
+					 */
+	BPF_SOCK_OPS_RETRANS_CB,	/* Called when skb is retransmitted.
+					 * Arg1: sequence number of 1st byte
+					 * Arg2: # segments
+					 * Arg3: return value of
+					 *       tcp_transmit_skb (0 => success)
+					 */
+	BPF_SOCK_OPS_STATE_CB,		/* Called when TCP changes state.
+					 * Arg1: old_state
+					 * Arg2: new_state
+					 */
+	BPF_SOCK_OPS_TCP_LISTEN_CB,	/* Called on listen(2), right after
+					 * socket transition to LISTEN state.
+					 */
+};
+
+/* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
+ * changes between the TCP and BPF versions. Ideally this should never happen.
+ * If it does, we need to add code to convert them before calling
+ * the BPF sock_ops function.
+ */
+enum {
+	BPF_TCP_ESTABLISHED = 1,
+	BPF_TCP_SYN_SENT,
+	BPF_TCP_SYN_RECV,
+	BPF_TCP_FIN_WAIT1,
+	BPF_TCP_FIN_WAIT2,
+	BPF_TCP_TIME_WAIT,
+	BPF_TCP_CLOSE,
+	BPF_TCP_CLOSE_WAIT,
+	BPF_TCP_LAST_ACK,
+	BPF_TCP_LISTEN,
+	BPF_TCP_CLOSING,	/* Now a valid state */
+	BPF_TCP_NEW_SYN_RECV,
+
+	BPF_TCP_MAX_STATES	/* Leave at the end! */
+};
+
+#define TCP_BPF_IW		1001	/* Set TCP initial congestion window */
+#define TCP_BPF_SNDCWND_CLAMP	1002	/* Set sndcwnd_clamp */
+
+struct bpf_perf_event_value {
+	__u64 counter;
+	__u64 enabled;
+	__u64 running;
+};
+
+#define BPF_DEVCG_ACC_MKNOD	(1ULL << 0)
+#define BPF_DEVCG_ACC_READ	(1ULL << 1)
+#define BPF_DEVCG_ACC_WRITE	(1ULL << 2)
+
+#define BPF_DEVCG_DEV_BLOCK	(1ULL << 0)
+#define BPF_DEVCG_DEV_CHAR	(1ULL << 1)
+
+struct bpf_cgroup_dev_ctx {
+	/* access_type encoded as (BPF_DEVCG_ACC_* << 16) | BPF_DEVCG_DEV_* */
+	__u32 access_type;
+	__u32 major;
+	__u32 minor;
+};
+
+struct bpf_raw_tracepoint_args {
+	__u64 args[0];
+};
+
+/* DIRECT:  Skip the FIB rules and go to FIB table associated with device
+ * OUTPUT:  Do lookup from egress perspective; default is ingress
+ */
+#define BPF_FIB_LOOKUP_DIRECT  BIT(0)
+#define BPF_FIB_LOOKUP_OUTPUT  BIT(1)
+
+enum {
+	BPF_FIB_LKUP_RET_SUCCESS,      /* lookup successful */
+	BPF_FIB_LKUP_RET_BLACKHOLE,    /* dest is blackholed; can be dropped */
+	BPF_FIB_LKUP_RET_UNREACHABLE,  /* dest is unreachable; can be dropped */
+	BPF_FIB_LKUP_RET_PROHIBIT,     /* dest not allowed; can be dropped */
+	BPF_FIB_LKUP_RET_NOT_FWDED,    /* packet is not forwarded */
+	BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */
+	BPF_FIB_LKUP_RET_UNSUPP_LWT,   /* fwd requires encapsulation */
+	BPF_FIB_LKUP_RET_NO_NEIGH,     /* no neighbor entry for nh */
+	BPF_FIB_LKUP_RET_FRAG_NEEDED,  /* fragmentation required to fwd */
+};
+
+struct bpf_fib_lookup {
+	/* input:  network family for lookup (AF_INET, AF_INET6)
+	 * output: network family of egress nexthop
+	 */
+	__u8	family;
+
+	/* set if lookup is to consider L4 data - e.g., FIB rules */
+	__u8	l4_protocol;
+	__be16	sport;
+	__be16	dport;
+
+	/* total length of packet from network header - used for MTU check */
+	__u16	tot_len;
+
+	/* input: L3 device index for lookup
+	 * output: device index from FIB lookup
+	 */
+	__u32	ifindex;
+
+	union {
+		/* inputs to lookup */
+		__u8	tos;		/* AF_INET  */
+		__be32	flowinfo;	/* AF_INET6, flow_label + priority */
+
+		/* output: metric of fib result (IPv4/IPv6 only) */
+		__u32	rt_metric;
+	};
+
+	union {
+		__be32		ipv4_src;
+		__u32		ipv6_src[4];  /* in6_addr; network order */
+	};
+
+	/* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in
+	 * network header. output: bpf_fib_lookup sets to gateway address
+	 * if FIB lookup returns gateway route
+	 */
+	union {
+		__be32		ipv4_dst;
+		__u32		ipv6_dst[4];  /* in6_addr; network order */
+	};
+
+	/* output */
+	__be16	h_vlan_proto;
+	__be16	h_vlan_TCI;
+	__u8	smac[6];     /* ETH_ALEN */
+	__u8	dmac[6];     /* ETH_ALEN */
+};
+
+enum bpf_task_fd_type {
+	BPF_FD_TYPE_RAW_TRACEPOINT,	/* tp name */
+	BPF_FD_TYPE_TRACEPOINT,		/* tp name */
+	BPF_FD_TYPE_KPROBE,		/* (symbol + offset) or addr */
+	BPF_FD_TYPE_KRETPROBE,		/* (symbol + offset) or addr */
+	BPF_FD_TYPE_UPROBE,		/* filename + offset */
+	BPF_FD_TYPE_URETPROBE,		/* filename + offset */
+};
+
+#endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/tools/include/uapi/linux/bpf_common.h b/tools/include/uapi/linux/bpf_common.h
new file mode 100644
index 000000000..ee97668bd
--- /dev/null
+++ b/tools/include/uapi/linux/bpf_common.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__LINUX_BPF_COMMON_H__
+#define _UAPI__LINUX_BPF_COMMON_H__
+
+/* Instruction classes */
+#define BPF_CLASS(code) ((code) & 0x07)
+#define		BPF_LD		0x00
+#define		BPF_LDX		0x01
+#define		BPF_ST		0x02
+#define		BPF_STX		0x03
+#define		BPF_ALU		0x04
+#define		BPF_JMP		0x05
+#define		BPF_RET		0x06
+#define		BPF_MISC        0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code)  ((code) & 0x18)
+#define		BPF_W		0x00 /* 32-bit */
+#define		BPF_H		0x08 /* 16-bit */
+#define		BPF_B		0x10 /*  8-bit */
+/* eBPF		BPF_DW		0x18    64-bit */
+#define BPF_MODE(code)  ((code) & 0xe0)
+#define		BPF_IMM		0x00
+#define		BPF_ABS		0x20
+#define		BPF_IND		0x40
+#define		BPF_MEM		0x60
+#define		BPF_LEN		0x80
+#define		BPF_MSH		0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code)    ((code) & 0xf0)
+#define		BPF_ADD		0x00
+#define		BPF_SUB		0x10
+#define		BPF_MUL		0x20
+#define		BPF_DIV		0x30
+#define		BPF_OR		0x40
+#define		BPF_AND		0x50
+#define		BPF_LSH		0x60
+#define		BPF_RSH		0x70
+#define		BPF_NEG		0x80
+#define		BPF_MOD		0x90
+#define		BPF_XOR		0xa0
+
+#define		BPF_JA		0x00
+#define		BPF_JEQ		0x10
+#define		BPF_JGT		0x20
+#define		BPF_JGE		0x30
+#define		BPF_JSET        0x40
+#define BPF_SRC(code)   ((code) & 0x08)
+#define		BPF_K		0x00
+#define		BPF_X		0x08
+
+#ifndef BPF_MAXINSNS
+#define BPF_MAXINSNS 4096
+#endif
+
+#endif /* _UAPI__LINUX_BPF_COMMON_H__ */
diff --git a/tools/include/uapi/linux/bpf_perf_event.h b/tools/include/uapi/linux/bpf_perf_event.h
new file mode 100644
index 000000000..8f95303f9
--- /dev/null
+++ b/tools/include/uapi/linux/bpf_perf_event.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Copyright (c) 2016 Facebook
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+#ifndef _UAPI__LINUX_BPF_PERF_EVENT_H__
+#define _UAPI__LINUX_BPF_PERF_EVENT_H__
+
+#include <asm/bpf_perf_event.h>
+
+struct bpf_perf_event_data {
+	bpf_user_pt_regs_t regs;
+	__u64 sample_period;
+};
+
+#endif /* _UAPI__LINUX_BPF_PERF_EVENT_H__ */
diff --git a/tools/include/uapi/linux/btf.h b/tools/include/uapi/linux/btf.h
new file mode 100644
index 000000000..972265f32
--- /dev/null
+++ b/tools/include/uapi/linux/btf.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Copyright (c) 2018 Facebook */
+#ifndef _UAPI__LINUX_BTF_H__
+#define _UAPI__LINUX_BTF_H__
+
+#include <linux/types.h>
+
+#define BTF_MAGIC	0xeB9F
+#define BTF_VERSION	1
+
+struct btf_header {
+	__u16	magic;
+	__u8	version;
+	__u8	flags;
+	__u32	hdr_len;
+
+	/* All offsets are in bytes relative to the end of this header */
+	__u32	type_off;	/* offset of type section	*/
+	__u32	type_len;	/* length of type section	*/
+	__u32	str_off;	/* offset of string section	*/
+	__u32	str_len;	/* length of string section	*/
+};
+
+/* Max # of type identifier */
+#define BTF_MAX_TYPE	0x0000ffff
+/* Max offset into the string section */
+#define BTF_MAX_NAME_OFFSET	0x0000ffff
+/* Max # of struct/union/enum members or func args */
+#define BTF_MAX_VLEN	0xffff
+
+struct btf_type {
+	__u32 name_off;
+	/* "info" bits arrangement
+	 * bits  0-15: vlen (e.g. # of struct's members)
+	 * bits 16-23: unused
+	 * bits 24-27: kind (e.g. int, ptr, array...etc)
+	 * bits 28-31: unused
+	 */
+	__u32 info;
+	/* "size" is used by INT, ENUM, STRUCT and UNION.
+	 * "size" tells the size of the type it is describing.
+	 *
+	 * "type" is used by PTR, TYPEDEF, VOLATILE, CONST and RESTRICT.
+	 * "type" is a type_id referring to another type.
+	 */
+	union {
+		__u32 size;
+		__u32 type;
+	};
+};
+
+#define BTF_INFO_KIND(info)	(((info) >> 24) & 0x0f)
+#define BTF_INFO_VLEN(info)	((info) & 0xffff)
+
+#define BTF_KIND_UNKN		0	/* Unknown	*/
+#define BTF_KIND_INT		1	/* Integer	*/
+#define BTF_KIND_PTR		2	/* Pointer	*/
+#define BTF_KIND_ARRAY		3	/* Array	*/
+#define BTF_KIND_STRUCT		4	/* Struct	*/
+#define BTF_KIND_UNION		5	/* Union	*/
+#define BTF_KIND_ENUM		6	/* Enumeration	*/
+#define BTF_KIND_FWD		7	/* Forward	*/
+#define BTF_KIND_TYPEDEF	8	/* Typedef	*/
+#define BTF_KIND_VOLATILE	9	/* Volatile	*/
+#define BTF_KIND_CONST		10	/* Const	*/
+#define BTF_KIND_RESTRICT	11	/* Restrict	*/
+#define BTF_KIND_MAX		11
+#define NR_BTF_KINDS		12
+
+/* For some specific BTF_KIND, "struct btf_type" is immediately
+ * followed by extra data.
+ */
+
+/* BTF_KIND_INT is followed by a u32 and the following
+ * is the 32 bits arrangement:
+ */
+#define BTF_INT_ENCODING(VAL)	(((VAL) & 0x0f000000) >> 24)
+#define BTF_INT_OFFSET(VAL)	(((VAL  & 0x00ff0000)) >> 16)
+#define BTF_INT_BITS(VAL)	((VAL)  & 0x000000ff)
+
+/* Attributes stored in the BTF_INT_ENCODING */
+#define BTF_INT_SIGNED	(1 << 0)
+#define BTF_INT_CHAR	(1 << 1)
+#define BTF_INT_BOOL	(1 << 2)
+
+/* BTF_KIND_ENUM is followed by multiple "struct btf_enum".
+ * The exact number of btf_enum is stored in the vlen (of the
+ * info in "struct btf_type").
+ */
+struct btf_enum {
+	__u32	name_off;
+	__s32	val;
+};
+
+/* BTF_KIND_ARRAY is followed by one "struct btf_array" */
+struct btf_array {
+	__u32	type;
+	__u32	index_type;
+	__u32	nelems;
+};
+
+/* BTF_KIND_STRUCT and BTF_KIND_UNION are followed
+ * by multiple "struct btf_member".  The exact number
+ * of btf_member is stored in the vlen (of the info in
+ * "struct btf_type").
+ */
+struct btf_member {
+	__u32	name_off;
+	__u32	type;
+	__u32	offset;	/* offset in bits */
+};
+
+#endif /* _UAPI__LINUX_BTF_H__ */
diff --git a/tools/include/uapi/linux/erspan.h b/tools/include/uapi/linux/erspan.h
new file mode 100644
index 000000000..841573019
--- /dev/null
+++ b/tools/include/uapi/linux/erspan.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * ERSPAN Tunnel Metadata
+ *
+ * Copyright (c) 2018 VMware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * Userspace API for metadata mode ERSPAN tunnel
+ */
+#ifndef _UAPI_ERSPAN_H
+#define _UAPI_ERSPAN_H
+
+#include <linux/types.h>	/* For __beXX in userspace */
+#include <asm/byteorder.h>
+
+/* ERSPAN version 2 metadata header */
+struct erspan_md2 {
+	__be32 timestamp;
+	__be16 sgt;	/* security group tag */
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	hwid_upper:2,
+		ft:5,
+		p:1;
+	__u8	o:1,
+		gra:2,
+		dir:1,
+		hwid:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8	p:1,
+		ft:5,
+		hwid_upper:2;
+	__u8	hwid:4,
+		dir:1,
+		gra:2,
+		o:1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+};
+
+struct erspan_metadata {
+	int version;
+	union {
+		__be32 index;		/* Version 1 (type II)*/
+		struct erspan_md2 md2;	/* Version 2 (type III) */
+	} u;
+};
+
+#endif /* _UAPI_ERSPAN_H */
diff --git a/tools/include/uapi/linux/fcntl.h b/tools/include/uapi/linux/fcntl.h
new file mode 100644
index 000000000..6448cdd9a
--- /dev/null
+++ b/tools/include/uapi/linux/fcntl.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_FCNTL_H
+#define _UAPI_LINUX_FCNTL_H
+
+#include <asm/fcntl.h>
+
+#define F_SETLEASE	(F_LINUX_SPECIFIC_BASE + 0)
+#define F_GETLEASE	(F_LINUX_SPECIFIC_BASE + 1)
+
+/*
+ * Cancel a blocking posix lock; internal use only until we expose an
+ * asynchronous lock api to userspace:
+ */
+#define F_CANCELLK	(F_LINUX_SPECIFIC_BASE + 5)
+
+/* Create a file descriptor with FD_CLOEXEC set. */
+#define F_DUPFD_CLOEXEC	(F_LINUX_SPECIFIC_BASE + 6)
+
+/*
+ * Request nofications on a directory.
+ * See below for events that may be notified.
+ */
+#define F_NOTIFY	(F_LINUX_SPECIFIC_BASE+2)
+
+/*
+ * Set and get of pipe page size array
+ */
+#define F_SETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 7)
+#define F_GETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 8)
+
+/*
+ * Set/Get seals
+ */
+#define F_ADD_SEALS	(F_LINUX_SPECIFIC_BASE + 9)
+#define F_GET_SEALS	(F_LINUX_SPECIFIC_BASE + 10)
+
+/*
+ * Types of seals
+ */
+#define F_SEAL_SEAL	0x0001	/* prevent further seals from being set */
+#define F_SEAL_SHRINK	0x0002	/* prevent file from shrinking */
+#define F_SEAL_GROW	0x0004	/* prevent file from growing */
+#define F_SEAL_WRITE	0x0008	/* prevent writes */
+/* (1U << 31) is reserved for signed error codes */
+
+/*
+ * Set/Get write life time hints. {GET,SET}_RW_HINT operate on the
+ * underlying inode, while {GET,SET}_FILE_RW_HINT operate only on
+ * the specific file.
+ */
+#define F_GET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 11)
+#define F_SET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 12)
+#define F_GET_FILE_RW_HINT	(F_LINUX_SPECIFIC_BASE + 13)
+#define F_SET_FILE_RW_HINT	(F_LINUX_SPECIFIC_BASE + 14)
+
+/*
+ * Valid hint values for F_{GET,SET}_RW_HINT. 0 is "not set", or can be
+ * used to clear any hints previously set.
+ */
+#define RWF_WRITE_LIFE_NOT_SET	0
+#define RWH_WRITE_LIFE_NONE	1
+#define RWH_WRITE_LIFE_SHORT	2
+#define RWH_WRITE_LIFE_MEDIUM	3
+#define RWH_WRITE_LIFE_LONG	4
+#define RWH_WRITE_LIFE_EXTREME	5
+
+/*
+ * Types of directory notifications that may be requested.
+ */
+#define DN_ACCESS	0x00000001	/* File accessed */
+#define DN_MODIFY	0x00000002	/* File modified */
+#define DN_CREATE	0x00000004	/* File created */
+#define DN_DELETE	0x00000008	/* File removed */
+#define DN_RENAME	0x00000010	/* File renamed */
+#define DN_ATTRIB	0x00000020	/* File changed attibutes */
+#define DN_MULTISHOT	0x80000000	/* Don't remove notifier */
+
+#define AT_FDCWD		-100    /* Special value used to indicate
+                                           openat should use the current
+                                           working directory. */
+#define AT_SYMLINK_NOFOLLOW	0x100   /* Do not follow symbolic links.  */
+#define AT_REMOVEDIR		0x200   /* Remove directory instead of
+                                           unlinking file.  */
+#define AT_SYMLINK_FOLLOW	0x400   /* Follow symbolic links.  */
+#define AT_NO_AUTOMOUNT		0x800	/* Suppress terminal automount traversal */
+#define AT_EMPTY_PATH		0x1000	/* Allow empty relative pathname */
+
+#define AT_STATX_SYNC_TYPE	0x6000	/* Type of synchronisation required from statx() */
+#define AT_STATX_SYNC_AS_STAT	0x0000	/* - Do whatever stat() does */
+#define AT_STATX_FORCE_SYNC	0x2000	/* - Force the attributes to be sync'd with the server */
+#define AT_STATX_DONT_SYNC	0x4000	/* - Don't sync attributes with the server */
+
+
+#endif /* _UAPI_LINUX_FCNTL_H */
diff --git a/tools/include/uapi/linux/hw_breakpoint.h b/tools/include/uapi/linux/hw_breakpoint.h
new file mode 100644
index 000000000..965e4d860
--- /dev/null
+++ b/tools/include/uapi/linux/hw_breakpoint.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_HW_BREAKPOINT_H
+#define _UAPI_LINUX_HW_BREAKPOINT_H
+
+enum {
+	HW_BREAKPOINT_LEN_1 = 1,
+	HW_BREAKPOINT_LEN_2 = 2,
+	HW_BREAKPOINT_LEN_3 = 3,
+	HW_BREAKPOINT_LEN_4 = 4,
+	HW_BREAKPOINT_LEN_5 = 5,
+	HW_BREAKPOINT_LEN_6 = 6,
+	HW_BREAKPOINT_LEN_7 = 7,
+	HW_BREAKPOINT_LEN_8 = 8,
+};
+
+enum {
+	HW_BREAKPOINT_EMPTY	= 0,
+	HW_BREAKPOINT_R		= 1,
+	HW_BREAKPOINT_W		= 2,
+	HW_BREAKPOINT_RW	= HW_BREAKPOINT_R | HW_BREAKPOINT_W,
+	HW_BREAKPOINT_X		= 4,
+	HW_BREAKPOINT_INVALID   = HW_BREAKPOINT_RW | HW_BREAKPOINT_X,
+};
+
+enum bp_type_idx {
+	TYPE_INST 	= 0,
+#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS
+	TYPE_DATA	= 0,
+#else
+	TYPE_DATA	= 1,
+#endif
+	TYPE_MAX
+};
+
+#endif /* _UAPI_LINUX_HW_BREAKPOINT_H */
diff --git a/tools/include/uapi/linux/if_link.h b/tools/include/uapi/linux/if_link.h
new file mode 100644
index 000000000..43391e2d1
--- /dev/null
+++ b/tools/include/uapi/linux/if_link.h
@@ -0,0 +1,1002 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_IF_LINK_H
+#define _UAPI_LINUX_IF_LINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+/* This struct should be in sync with struct rtnl_link_stats64 */
+struct rtnl_link_stats {
+	__u32	rx_packets;		/* total packets received	*/
+	__u32	tx_packets;		/* total packets transmitted	*/
+	__u32	rx_bytes;		/* total bytes received 	*/
+	__u32	tx_bytes;		/* total bytes transmitted	*/
+	__u32	rx_errors;		/* bad packets received		*/
+	__u32	tx_errors;		/* packet transmit problems	*/
+	__u32	rx_dropped;		/* no space in linux buffers	*/
+	__u32	tx_dropped;		/* no space available in linux	*/
+	__u32	multicast;		/* multicast packets received	*/
+	__u32	collisions;
+
+	/* detailed rx_errors: */
+	__u32	rx_length_errors;
+	__u32	rx_over_errors;		/* receiver ring buff overflow	*/
+	__u32	rx_crc_errors;		/* recved pkt with crc error	*/
+	__u32	rx_frame_errors;	/* recv'd frame alignment error */
+	__u32	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	__u32	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	__u32	tx_aborted_errors;
+	__u32	tx_carrier_errors;
+	__u32	tx_fifo_errors;
+	__u32	tx_heartbeat_errors;
+	__u32	tx_window_errors;
+
+	/* for cslip etc */
+	__u32	rx_compressed;
+	__u32	tx_compressed;
+
+	__u32	rx_nohandler;		/* dropped, no handler found	*/
+};
+
+/* The main device statistics structure */
+struct rtnl_link_stats64 {
+	__u64	rx_packets;		/* total packets received	*/
+	__u64	tx_packets;		/* total packets transmitted	*/
+	__u64	rx_bytes;		/* total bytes received 	*/
+	__u64	tx_bytes;		/* total bytes transmitted	*/
+	__u64	rx_errors;		/* bad packets received		*/
+	__u64	tx_errors;		/* packet transmit problems	*/
+	__u64	rx_dropped;		/* no space in linux buffers	*/
+	__u64	tx_dropped;		/* no space available in linux	*/
+	__u64	multicast;		/* multicast packets received	*/
+	__u64	collisions;
+
+	/* detailed rx_errors: */
+	__u64	rx_length_errors;
+	__u64	rx_over_errors;		/* receiver ring buff overflow	*/
+	__u64	rx_crc_errors;		/* recved pkt with crc error	*/
+	__u64	rx_frame_errors;	/* recv'd frame alignment error */
+	__u64	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	__u64	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	__u64	tx_aborted_errors;
+	__u64	tx_carrier_errors;
+	__u64	tx_fifo_errors;
+	__u64	tx_heartbeat_errors;
+	__u64	tx_window_errors;
+
+	/* for cslip etc */
+	__u64	rx_compressed;
+	__u64	tx_compressed;
+
+	__u64	rx_nohandler;		/* dropped, no handler found	*/
+};
+
+/* The struct should be in sync with struct ifmap */
+struct rtnl_link_ifmap {
+	__u64	mem_start;
+	__u64	mem_end;
+	__u64	base_addr;
+	__u16	irq;
+	__u8	dma;
+	__u8	port;
+};
+
+/*
+ * IFLA_AF_SPEC
+ *   Contains nested attributes for address family specific attributes.
+ *   Each address family may create a attribute with the address family
+ *   number as type and create its own attribute structure in it.
+ *
+ *   Example:
+ *   [IFLA_AF_SPEC] = {
+ *       [AF_INET] = {
+ *           [IFLA_INET_CONF] = ...,
+ *       },
+ *       [AF_INET6] = {
+ *           [IFLA_INET6_FLAGS] = ...,
+ *           [IFLA_INET6_CONF] = ...,
+ *       }
+ *   }
+ */
+
+enum {
+	IFLA_UNSPEC,
+	IFLA_ADDRESS,
+	IFLA_BROADCAST,
+	IFLA_IFNAME,
+	IFLA_MTU,
+	IFLA_LINK,
+	IFLA_QDISC,
+	IFLA_STATS,
+	IFLA_COST,
+#define IFLA_COST IFLA_COST
+	IFLA_PRIORITY,
+#define IFLA_PRIORITY IFLA_PRIORITY
+	IFLA_MASTER,
+#define IFLA_MASTER IFLA_MASTER
+	IFLA_WIRELESS,		/* Wireless Extension event - see wireless.h */
+#define IFLA_WIRELESS IFLA_WIRELESS
+	IFLA_PROTINFO,		/* Protocol specific information for a link */
+#define IFLA_PROTINFO IFLA_PROTINFO
+	IFLA_TXQLEN,
+#define IFLA_TXQLEN IFLA_TXQLEN
+	IFLA_MAP,
+#define IFLA_MAP IFLA_MAP
+	IFLA_WEIGHT,
+#define IFLA_WEIGHT IFLA_WEIGHT
+	IFLA_OPERSTATE,
+	IFLA_LINKMODE,
+	IFLA_LINKINFO,
+#define IFLA_LINKINFO IFLA_LINKINFO
+	IFLA_NET_NS_PID,
+	IFLA_IFALIAS,
+	IFLA_NUM_VF,		/* Number of VFs if device is SR-IOV PF */
+	IFLA_VFINFO_LIST,
+	IFLA_STATS64,
+	IFLA_VF_PORTS,
+	IFLA_PORT_SELF,
+	IFLA_AF_SPEC,
+	IFLA_GROUP,		/* Group the device belongs to */
+	IFLA_NET_NS_FD,
+	IFLA_EXT_MASK,		/* Extended info mask, VFs, etc */
+	IFLA_PROMISCUITY,	/* Promiscuity count: > 0 means acts PROMISC */
+#define IFLA_PROMISCUITY IFLA_PROMISCUITY
+	IFLA_NUM_TX_QUEUES,
+	IFLA_NUM_RX_QUEUES,
+	IFLA_CARRIER,
+	IFLA_PHYS_PORT_ID,
+	IFLA_CARRIER_CHANGES,
+	IFLA_PHYS_SWITCH_ID,
+	IFLA_LINK_NETNSID,
+	IFLA_PHYS_PORT_NAME,
+	IFLA_PROTO_DOWN,
+	IFLA_GSO_MAX_SEGS,
+	IFLA_GSO_MAX_SIZE,
+	IFLA_PAD,
+	IFLA_XDP,
+	IFLA_EVENT,
+	IFLA_NEW_NETNSID,
+	IFLA_IF_NETNSID,
+	IFLA_CARRIER_UP_COUNT,
+	IFLA_CARRIER_DOWN_COUNT,
+	IFLA_NEW_IFINDEX,
+	IFLA_MIN_MTU,
+	IFLA_MAX_MTU,
+	__IFLA_MAX
+};
+
+
+#define IFLA_MAX (__IFLA_MAX - 1)
+
+/* backwards compatibility for userspace */
+#ifndef __KERNEL__
+#define IFLA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
+#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
+#endif
+
+enum {
+	IFLA_INET_UNSPEC,
+	IFLA_INET_CONF,
+	__IFLA_INET_MAX,
+};
+
+#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
+
+/* ifi_flags.
+
+   IFF_* flags.
+
+   The only change is:
+   IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
+   more not changeable by user. They describe link media
+   characteristics and set by device driver.
+
+   Comments:
+   - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
+   - If neither of these three flags are set;
+     the interface is NBMA.
+
+   - IFF_MULTICAST does not mean anything special:
+   multicasts can be used on all not-NBMA links.
+   IFF_MULTICAST means that this media uses special encapsulation
+   for multicast frames. Apparently, all IFF_POINTOPOINT and
+   IFF_BROADCAST devices are able to use multicasts too.
+ */
+
+/* IFLA_LINK.
+   For usual devices it is equal ifi_index.
+   If it is a "virtual interface" (f.e. tunnel), ifi_link
+   can point to real physical interface (f.e. for bandwidth calculations),
+   or maybe 0, what means, that real media is unknown (usual
+   for IPIP tunnels, when route to endpoint is allowed to change)
+ */
+
+/* Subtype attributes for IFLA_PROTINFO */
+enum {
+	IFLA_INET6_UNSPEC,
+	IFLA_INET6_FLAGS,	/* link flags			*/
+	IFLA_INET6_CONF,	/* sysctl parameters		*/
+	IFLA_INET6_STATS,	/* statistics			*/
+	IFLA_INET6_MCAST,	/* MC things. What of them?	*/
+	IFLA_INET6_CACHEINFO,	/* time values and max reasm size */
+	IFLA_INET6_ICMP6STATS,	/* statistics (icmpv6)		*/
+	IFLA_INET6_TOKEN,	/* device token			*/
+	IFLA_INET6_ADDR_GEN_MODE, /* implicit address generator mode */
+	__IFLA_INET6_MAX
+};
+
+#define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
+
+enum in6_addr_gen_mode {
+	IN6_ADDR_GEN_MODE_EUI64,
+	IN6_ADDR_GEN_MODE_NONE,
+	IN6_ADDR_GEN_MODE_STABLE_PRIVACY,
+	IN6_ADDR_GEN_MODE_RANDOM,
+};
+
+/* Bridge section */
+
+enum {
+	IFLA_BR_UNSPEC,
+	IFLA_BR_FORWARD_DELAY,
+	IFLA_BR_HELLO_TIME,
+	IFLA_BR_MAX_AGE,
+	IFLA_BR_AGEING_TIME,
+	IFLA_BR_STP_STATE,
+	IFLA_BR_PRIORITY,
+	IFLA_BR_VLAN_FILTERING,
+	IFLA_BR_VLAN_PROTOCOL,
+	IFLA_BR_GROUP_FWD_MASK,
+	IFLA_BR_ROOT_ID,
+	IFLA_BR_BRIDGE_ID,
+	IFLA_BR_ROOT_PORT,
+	IFLA_BR_ROOT_PATH_COST,
+	IFLA_BR_TOPOLOGY_CHANGE,
+	IFLA_BR_TOPOLOGY_CHANGE_DETECTED,
+	IFLA_BR_HELLO_TIMER,
+	IFLA_BR_TCN_TIMER,
+	IFLA_BR_TOPOLOGY_CHANGE_TIMER,
+	IFLA_BR_GC_TIMER,
+	IFLA_BR_GROUP_ADDR,
+	IFLA_BR_FDB_FLUSH,
+	IFLA_BR_MCAST_ROUTER,
+	IFLA_BR_MCAST_SNOOPING,
+	IFLA_BR_MCAST_QUERY_USE_IFADDR,
+	IFLA_BR_MCAST_QUERIER,
+	IFLA_BR_MCAST_HASH_ELASTICITY,
+	IFLA_BR_MCAST_HASH_MAX,
+	IFLA_BR_MCAST_LAST_MEMBER_CNT,
+	IFLA_BR_MCAST_STARTUP_QUERY_CNT,
+	IFLA_BR_MCAST_LAST_MEMBER_INTVL,
+	IFLA_BR_MCAST_MEMBERSHIP_INTVL,
+	IFLA_BR_MCAST_QUERIER_INTVL,
+	IFLA_BR_MCAST_QUERY_INTVL,
+	IFLA_BR_MCAST_QUERY_RESPONSE_INTVL,
+	IFLA_BR_MCAST_STARTUP_QUERY_INTVL,
+	IFLA_BR_NF_CALL_IPTABLES,
+	IFLA_BR_NF_CALL_IP6TABLES,
+	IFLA_BR_NF_CALL_ARPTABLES,
+	IFLA_BR_VLAN_DEFAULT_PVID,
+	IFLA_BR_PAD,
+	IFLA_BR_VLAN_STATS_ENABLED,
+	IFLA_BR_MCAST_STATS_ENABLED,
+	IFLA_BR_MCAST_IGMP_VERSION,
+	IFLA_BR_MCAST_MLD_VERSION,
+	__IFLA_BR_MAX,
+};
+
+#define IFLA_BR_MAX	(__IFLA_BR_MAX - 1)
+
+struct ifla_bridge_id {
+	__u8	prio[2];
+	__u8	addr[6]; /* ETH_ALEN */
+};
+
+enum {
+	BRIDGE_MODE_UNSPEC,
+	BRIDGE_MODE_HAIRPIN,
+};
+
+enum {
+	IFLA_BRPORT_UNSPEC,
+	IFLA_BRPORT_STATE,	/* Spanning tree state     */
+	IFLA_BRPORT_PRIORITY,	/* "             priority  */
+	IFLA_BRPORT_COST,	/* "             cost      */
+	IFLA_BRPORT_MODE,	/* mode (hairpin)          */
+	IFLA_BRPORT_GUARD,	/* bpdu guard              */
+	IFLA_BRPORT_PROTECT,	/* root port protection    */
+	IFLA_BRPORT_FAST_LEAVE,	/* multicast fast leave    */
+	IFLA_BRPORT_LEARNING,	/* mac learning */
+	IFLA_BRPORT_UNICAST_FLOOD, /* flood unicast traffic */
+	IFLA_BRPORT_PROXYARP,	/* proxy ARP */
+	IFLA_BRPORT_LEARNING_SYNC, /* mac learning sync from device */
+	IFLA_BRPORT_PROXYARP_WIFI, /* proxy ARP for Wi-Fi */
+	IFLA_BRPORT_ROOT_ID,	/* designated root */
+	IFLA_BRPORT_BRIDGE_ID,	/* designated bridge */
+	IFLA_BRPORT_DESIGNATED_PORT,
+	IFLA_BRPORT_DESIGNATED_COST,
+	IFLA_BRPORT_ID,
+	IFLA_BRPORT_NO,
+	IFLA_BRPORT_TOPOLOGY_CHANGE_ACK,
+	IFLA_BRPORT_CONFIG_PENDING,
+	IFLA_BRPORT_MESSAGE_AGE_TIMER,
+	IFLA_BRPORT_FORWARD_DELAY_TIMER,
+	IFLA_BRPORT_HOLD_TIMER,
+	IFLA_BRPORT_FLUSH,
+	IFLA_BRPORT_MULTICAST_ROUTER,
+	IFLA_BRPORT_PAD,
+	IFLA_BRPORT_MCAST_FLOOD,
+	IFLA_BRPORT_MCAST_TO_UCAST,
+	IFLA_BRPORT_VLAN_TUNNEL,
+	IFLA_BRPORT_BCAST_FLOOD,
+	IFLA_BRPORT_GROUP_FWD_MASK,
+	IFLA_BRPORT_NEIGH_SUPPRESS,
+	IFLA_BRPORT_ISOLATED,
+	IFLA_BRPORT_BACKUP_PORT,
+	__IFLA_BRPORT_MAX
+};
+#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
+
+struct ifla_cacheinfo {
+	__u32	max_reasm_len;
+	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
+	__u32	reachable_time;
+	__u32	retrans_time;
+};
+
+enum {
+	IFLA_INFO_UNSPEC,
+	IFLA_INFO_KIND,
+	IFLA_INFO_DATA,
+	IFLA_INFO_XSTATS,
+	IFLA_INFO_SLAVE_KIND,
+	IFLA_INFO_SLAVE_DATA,
+	__IFLA_INFO_MAX,
+};
+
+#define IFLA_INFO_MAX	(__IFLA_INFO_MAX - 1)
+
+/* VLAN section */
+
+enum {
+	IFLA_VLAN_UNSPEC,
+	IFLA_VLAN_ID,
+	IFLA_VLAN_FLAGS,
+	IFLA_VLAN_EGRESS_QOS,
+	IFLA_VLAN_INGRESS_QOS,
+	IFLA_VLAN_PROTOCOL,
+	__IFLA_VLAN_MAX,
+};
+
+#define IFLA_VLAN_MAX	(__IFLA_VLAN_MAX - 1)
+
+struct ifla_vlan_flags {
+	__u32	flags;
+	__u32	mask;
+};
+
+enum {
+	IFLA_VLAN_QOS_UNSPEC,
+	IFLA_VLAN_QOS_MAPPING,
+	__IFLA_VLAN_QOS_MAX
+};
+
+#define IFLA_VLAN_QOS_MAX	(__IFLA_VLAN_QOS_MAX - 1)
+
+struct ifla_vlan_qos_mapping {
+	__u32 from;
+	__u32 to;
+};
+
+/* MACVLAN section */
+enum {
+	IFLA_MACVLAN_UNSPEC,
+	IFLA_MACVLAN_MODE,
+	IFLA_MACVLAN_FLAGS,
+	IFLA_MACVLAN_MACADDR_MODE,
+	IFLA_MACVLAN_MACADDR,
+	IFLA_MACVLAN_MACADDR_DATA,
+	IFLA_MACVLAN_MACADDR_COUNT,
+	__IFLA_MACVLAN_MAX,
+};
+
+#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
+
+enum macvlan_mode {
+	MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
+	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
+	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
+	MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
+	MACVLAN_MODE_SOURCE  = 16,/* use source MAC address list to assign */
+};
+
+enum macvlan_macaddr_mode {
+	MACVLAN_MACADDR_ADD,
+	MACVLAN_MACADDR_DEL,
+	MACVLAN_MACADDR_FLUSH,
+	MACVLAN_MACADDR_SET,
+};
+
+#define MACVLAN_FLAG_NOPROMISC	1
+
+/* VRF section */
+enum {
+	IFLA_VRF_UNSPEC,
+	IFLA_VRF_TABLE,
+	__IFLA_VRF_MAX
+};
+
+#define IFLA_VRF_MAX (__IFLA_VRF_MAX - 1)
+
+enum {
+	IFLA_VRF_PORT_UNSPEC,
+	IFLA_VRF_PORT_TABLE,
+	__IFLA_VRF_PORT_MAX
+};
+
+#define IFLA_VRF_PORT_MAX (__IFLA_VRF_PORT_MAX - 1)
+
+/* MACSEC section */
+enum {
+	IFLA_MACSEC_UNSPEC,
+	IFLA_MACSEC_SCI,
+	IFLA_MACSEC_PORT,
+	IFLA_MACSEC_ICV_LEN,
+	IFLA_MACSEC_CIPHER_SUITE,
+	IFLA_MACSEC_WINDOW,
+	IFLA_MACSEC_ENCODING_SA,
+	IFLA_MACSEC_ENCRYPT,
+	IFLA_MACSEC_PROTECT,
+	IFLA_MACSEC_INC_SCI,
+	IFLA_MACSEC_ES,
+	IFLA_MACSEC_SCB,
+	IFLA_MACSEC_REPLAY_PROTECT,
+	IFLA_MACSEC_VALIDATION,
+	IFLA_MACSEC_PAD,
+	__IFLA_MACSEC_MAX,
+};
+
+#define IFLA_MACSEC_MAX (__IFLA_MACSEC_MAX - 1)
+
+/* XFRM section */
+enum {
+	IFLA_XFRM_UNSPEC,
+	IFLA_XFRM_LINK,
+	IFLA_XFRM_IF_ID,
+	__IFLA_XFRM_MAX
+};
+
+#define IFLA_XFRM_MAX (__IFLA_XFRM_MAX - 1)
+
+enum macsec_validation_type {
+	MACSEC_VALIDATE_DISABLED = 0,
+	MACSEC_VALIDATE_CHECK = 1,
+	MACSEC_VALIDATE_STRICT = 2,
+	__MACSEC_VALIDATE_END,
+	MACSEC_VALIDATE_MAX = __MACSEC_VALIDATE_END - 1,
+};
+
+/* IPVLAN section */
+enum {
+	IFLA_IPVLAN_UNSPEC,
+	IFLA_IPVLAN_MODE,
+	IFLA_IPVLAN_FLAGS,
+	__IFLA_IPVLAN_MAX
+};
+
+#define IFLA_IPVLAN_MAX (__IFLA_IPVLAN_MAX - 1)
+
+enum ipvlan_mode {
+	IPVLAN_MODE_L2 = 0,
+	IPVLAN_MODE_L3,
+	IPVLAN_MODE_L3S,
+	IPVLAN_MODE_MAX
+};
+
+#define IPVLAN_F_PRIVATE	0x01
+#define IPVLAN_F_VEPA		0x02
+
+/* VXLAN section */
+enum {
+	IFLA_VXLAN_UNSPEC,
+	IFLA_VXLAN_ID,
+	IFLA_VXLAN_GROUP,	/* group or remote address */
+	IFLA_VXLAN_LINK,
+	IFLA_VXLAN_LOCAL,
+	IFLA_VXLAN_TTL,
+	IFLA_VXLAN_TOS,
+	IFLA_VXLAN_LEARNING,
+	IFLA_VXLAN_AGEING,
+	IFLA_VXLAN_LIMIT,
+	IFLA_VXLAN_PORT_RANGE,	/* source port */
+	IFLA_VXLAN_PROXY,
+	IFLA_VXLAN_RSC,
+	IFLA_VXLAN_L2MISS,
+	IFLA_VXLAN_L3MISS,
+	IFLA_VXLAN_PORT,	/* destination port */
+	IFLA_VXLAN_GROUP6,
+	IFLA_VXLAN_LOCAL6,
+	IFLA_VXLAN_UDP_CSUM,
+	IFLA_VXLAN_UDP_ZERO_CSUM6_TX,
+	IFLA_VXLAN_UDP_ZERO_CSUM6_RX,
+	IFLA_VXLAN_REMCSUM_TX,
+	IFLA_VXLAN_REMCSUM_RX,
+	IFLA_VXLAN_GBP,
+	IFLA_VXLAN_REMCSUM_NOPARTIAL,
+	IFLA_VXLAN_COLLECT_METADATA,
+	IFLA_VXLAN_LABEL,
+	IFLA_VXLAN_GPE,
+	IFLA_VXLAN_TTL_INHERIT,
+	__IFLA_VXLAN_MAX
+};
+#define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
+
+struct ifla_vxlan_port_range {
+	__be16	low;
+	__be16	high;
+};
+
+/* GENEVE section */
+enum {
+	IFLA_GENEVE_UNSPEC,
+	IFLA_GENEVE_ID,
+	IFLA_GENEVE_REMOTE,
+	IFLA_GENEVE_TTL,
+	IFLA_GENEVE_TOS,
+	IFLA_GENEVE_PORT,	/* destination port */
+	IFLA_GENEVE_COLLECT_METADATA,
+	IFLA_GENEVE_REMOTE6,
+	IFLA_GENEVE_UDP_CSUM,
+	IFLA_GENEVE_UDP_ZERO_CSUM6_TX,
+	IFLA_GENEVE_UDP_ZERO_CSUM6_RX,
+	IFLA_GENEVE_LABEL,
+	__IFLA_GENEVE_MAX
+};
+#define IFLA_GENEVE_MAX	(__IFLA_GENEVE_MAX - 1)
+
+/* PPP section */
+enum {
+	IFLA_PPP_UNSPEC,
+	IFLA_PPP_DEV_FD,
+	__IFLA_PPP_MAX
+};
+#define IFLA_PPP_MAX (__IFLA_PPP_MAX - 1)
+
+/* GTP section */
+
+enum ifla_gtp_role {
+	GTP_ROLE_GGSN = 0,
+	GTP_ROLE_SGSN,
+};
+
+enum {
+	IFLA_GTP_UNSPEC,
+	IFLA_GTP_FD0,
+	IFLA_GTP_FD1,
+	IFLA_GTP_PDP_HASHSIZE,
+	IFLA_GTP_ROLE,
+	__IFLA_GTP_MAX,
+};
+#define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1)
+
+/* Bonding section */
+
+enum {
+	IFLA_BOND_UNSPEC,
+	IFLA_BOND_MODE,
+	IFLA_BOND_ACTIVE_SLAVE,
+	IFLA_BOND_MIIMON,
+	IFLA_BOND_UPDELAY,
+	IFLA_BOND_DOWNDELAY,
+	IFLA_BOND_USE_CARRIER,
+	IFLA_BOND_ARP_INTERVAL,
+	IFLA_BOND_ARP_IP_TARGET,
+	IFLA_BOND_ARP_VALIDATE,
+	IFLA_BOND_ARP_ALL_TARGETS,
+	IFLA_BOND_PRIMARY,
+	IFLA_BOND_PRIMARY_RESELECT,
+	IFLA_BOND_FAIL_OVER_MAC,
+	IFLA_BOND_XMIT_HASH_POLICY,
+	IFLA_BOND_RESEND_IGMP,
+	IFLA_BOND_NUM_PEER_NOTIF,
+	IFLA_BOND_ALL_SLAVES_ACTIVE,
+	IFLA_BOND_MIN_LINKS,
+	IFLA_BOND_LP_INTERVAL,
+	IFLA_BOND_PACKETS_PER_SLAVE,
+	IFLA_BOND_AD_LACP_RATE,
+	IFLA_BOND_AD_SELECT,
+	IFLA_BOND_AD_INFO,
+	IFLA_BOND_AD_ACTOR_SYS_PRIO,
+	IFLA_BOND_AD_USER_PORT_KEY,
+	IFLA_BOND_AD_ACTOR_SYSTEM,
+	IFLA_BOND_TLB_DYNAMIC_LB,
+	__IFLA_BOND_MAX,
+};
+
+#define IFLA_BOND_MAX	(__IFLA_BOND_MAX - 1)
+
+enum {
+	IFLA_BOND_AD_INFO_UNSPEC,
+	IFLA_BOND_AD_INFO_AGGREGATOR,
+	IFLA_BOND_AD_INFO_NUM_PORTS,
+	IFLA_BOND_AD_INFO_ACTOR_KEY,
+	IFLA_BOND_AD_INFO_PARTNER_KEY,
+	IFLA_BOND_AD_INFO_PARTNER_MAC,
+	__IFLA_BOND_AD_INFO_MAX,
+};
+
+#define IFLA_BOND_AD_INFO_MAX	(__IFLA_BOND_AD_INFO_MAX - 1)
+
+enum {
+	IFLA_BOND_SLAVE_UNSPEC,
+	IFLA_BOND_SLAVE_STATE,
+	IFLA_BOND_SLAVE_MII_STATUS,
+	IFLA_BOND_SLAVE_LINK_FAILURE_COUNT,
+	IFLA_BOND_SLAVE_PERM_HWADDR,
+	IFLA_BOND_SLAVE_QUEUE_ID,
+	IFLA_BOND_SLAVE_AD_AGGREGATOR_ID,
+	IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE,
+	IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE,
+	__IFLA_BOND_SLAVE_MAX,
+};
+
+#define IFLA_BOND_SLAVE_MAX	(__IFLA_BOND_SLAVE_MAX - 1)
+
+/* SR-IOV virtual function management section */
+
+enum {
+	IFLA_VF_INFO_UNSPEC,
+	IFLA_VF_INFO,
+	__IFLA_VF_INFO_MAX,
+};
+
+#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
+
+enum {
+	IFLA_VF_UNSPEC,
+	IFLA_VF_MAC,		/* Hardware queue specific attributes */
+	IFLA_VF_VLAN,		/* VLAN ID and QoS */
+	IFLA_VF_TX_RATE,	/* Max TX Bandwidth Allocation */
+	IFLA_VF_SPOOFCHK,	/* Spoof Checking on/off switch */
+	IFLA_VF_LINK_STATE,	/* link state enable/disable/auto switch */
+	IFLA_VF_RATE,		/* Min and Max TX Bandwidth Allocation */
+	IFLA_VF_RSS_QUERY_EN,	/* RSS Redirection Table and Hash Key query
+				 * on/off switch
+				 */
+	IFLA_VF_STATS,		/* network device statistics */
+	IFLA_VF_TRUST,		/* Trust VF */
+	IFLA_VF_IB_NODE_GUID,	/* VF Infiniband node GUID */
+	IFLA_VF_IB_PORT_GUID,	/* VF Infiniband port GUID */
+	IFLA_VF_VLAN_LIST,	/* nested list of vlans, option for QinQ */
+	__IFLA_VF_MAX,
+};
+
+#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
+
+struct ifla_vf_mac {
+	__u32 vf;
+	__u8 mac[32]; /* MAX_ADDR_LEN */
+};
+
+struct ifla_vf_vlan {
+	__u32 vf;
+	__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
+	__u32 qos;
+};
+
+enum {
+	IFLA_VF_VLAN_INFO_UNSPEC,
+	IFLA_VF_VLAN_INFO,	/* VLAN ID, QoS and VLAN protocol */
+	__IFLA_VF_VLAN_INFO_MAX,
+};
+
+#define IFLA_VF_VLAN_INFO_MAX (__IFLA_VF_VLAN_INFO_MAX - 1)
+#define MAX_VLAN_LIST_LEN 1
+
+struct ifla_vf_vlan_info {
+	__u32 vf;
+	__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
+	__u32 qos;
+	__be16 vlan_proto; /* VLAN protocol either 802.1Q or 802.1ad */
+};
+
+struct ifla_vf_tx_rate {
+	__u32 vf;
+	__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
+};
+
+struct ifla_vf_rate {
+	__u32 vf;
+	__u32 min_tx_rate; /* Min Bandwidth in Mbps */
+	__u32 max_tx_rate; /* Max Bandwidth in Mbps */
+};
+
+struct ifla_vf_spoofchk {
+	__u32 vf;
+	__u32 setting;
+};
+
+struct ifla_vf_guid {
+	__u32 vf;
+	__u64 guid;
+};
+
+enum {
+	IFLA_VF_LINK_STATE_AUTO,	/* link state of the uplink */
+	IFLA_VF_LINK_STATE_ENABLE,	/* link always up */
+	IFLA_VF_LINK_STATE_DISABLE,	/* link always down */
+	__IFLA_VF_LINK_STATE_MAX,
+};
+
+struct ifla_vf_link_state {
+	__u32 vf;
+	__u32 link_state;
+};
+
+struct ifla_vf_rss_query_en {
+	__u32 vf;
+	__u32 setting;
+};
+
+enum {
+	IFLA_VF_STATS_RX_PACKETS,
+	IFLA_VF_STATS_TX_PACKETS,
+	IFLA_VF_STATS_RX_BYTES,
+	IFLA_VF_STATS_TX_BYTES,
+	IFLA_VF_STATS_BROADCAST,
+	IFLA_VF_STATS_MULTICAST,
+	IFLA_VF_STATS_PAD,
+	IFLA_VF_STATS_RX_DROPPED,
+	IFLA_VF_STATS_TX_DROPPED,
+	__IFLA_VF_STATS_MAX,
+};
+
+#define IFLA_VF_STATS_MAX (__IFLA_VF_STATS_MAX - 1)
+
+struct ifla_vf_trust {
+	__u32 vf;
+	__u32 setting;
+};
+
+/* VF ports management section
+ *
+ *	Nested layout of set/get msg is:
+ *
+ *		[IFLA_NUM_VF]
+ *		[IFLA_VF_PORTS]
+ *			[IFLA_VF_PORT]
+ *				[IFLA_PORT_*], ...
+ *			[IFLA_VF_PORT]
+ *				[IFLA_PORT_*], ...
+ *			...
+ *		[IFLA_PORT_SELF]
+ *			[IFLA_PORT_*], ...
+ */
+
+enum {
+	IFLA_VF_PORT_UNSPEC,
+	IFLA_VF_PORT,			/* nest */
+	__IFLA_VF_PORT_MAX,
+};
+
+#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
+
+enum {
+	IFLA_PORT_UNSPEC,
+	IFLA_PORT_VF,			/* __u32 */
+	IFLA_PORT_PROFILE,		/* string */
+	IFLA_PORT_VSI_TYPE,		/* 802.1Qbg (pre-)standard VDP */
+	IFLA_PORT_INSTANCE_UUID,	/* binary UUID */
+	IFLA_PORT_HOST_UUID,		/* binary UUID */
+	IFLA_PORT_REQUEST,		/* __u8 */
+	IFLA_PORT_RESPONSE,		/* __u16, output only */
+	__IFLA_PORT_MAX,
+};
+
+#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
+
+#define PORT_PROFILE_MAX	40
+#define PORT_UUID_MAX		16
+#define PORT_SELF_VF		-1
+
+enum {
+	PORT_REQUEST_PREASSOCIATE = 0,
+	PORT_REQUEST_PREASSOCIATE_RR,
+	PORT_REQUEST_ASSOCIATE,
+	PORT_REQUEST_DISASSOCIATE,
+};
+
+enum {
+	PORT_VDP_RESPONSE_SUCCESS = 0,
+	PORT_VDP_RESPONSE_INVALID_FORMAT,
+	PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
+	PORT_VDP_RESPONSE_UNUSED_VTID,
+	PORT_VDP_RESPONSE_VTID_VIOLATION,
+	PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
+	PORT_VDP_RESPONSE_OUT_OF_SYNC,
+	/* 0x08-0xFF reserved for future VDP use */
+	PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
+	PORT_PROFILE_RESPONSE_INPROGRESS,
+	PORT_PROFILE_RESPONSE_INVALID,
+	PORT_PROFILE_RESPONSE_BADSTATE,
+	PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
+	PORT_PROFILE_RESPONSE_ERROR,
+};
+
+struct ifla_port_vsi {
+	__u8 vsi_mgr_id;
+	__u8 vsi_type_id[3];
+	__u8 vsi_type_version;
+	__u8 pad[3];
+};
+
+
+/* IPoIB section */
+
+enum {
+	IFLA_IPOIB_UNSPEC,
+	IFLA_IPOIB_PKEY,
+	IFLA_IPOIB_MODE,
+	IFLA_IPOIB_UMCAST,
+	__IFLA_IPOIB_MAX
+};
+
+enum {
+	IPOIB_MODE_DATAGRAM  = 0, /* using unreliable datagram QPs */
+	IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
+};
+
+#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
+
+
+/* HSR section */
+
+enum {
+	IFLA_HSR_UNSPEC,
+	IFLA_HSR_SLAVE1,
+	IFLA_HSR_SLAVE2,
+	IFLA_HSR_MULTICAST_SPEC,	/* Last byte of supervision addr */
+	IFLA_HSR_SUPERVISION_ADDR,	/* Supervision frame multicast addr */
+	IFLA_HSR_SEQ_NR,
+	IFLA_HSR_VERSION,		/* HSR version */
+	__IFLA_HSR_MAX,
+};
+
+#define IFLA_HSR_MAX (__IFLA_HSR_MAX - 1)
+
+/* STATS section */
+
+struct if_stats_msg {
+	__u8  family;
+	__u8  pad1;
+	__u16 pad2;
+	__u32 ifindex;
+	__u32 filter_mask;
+};
+
+/* A stats attribute can be netdev specific or a global stat.
+ * For netdev stats, lets use the prefix IFLA_STATS_LINK_*
+ */
+enum {
+	IFLA_STATS_UNSPEC, /* also used as 64bit pad attribute */
+	IFLA_STATS_LINK_64,
+	IFLA_STATS_LINK_XSTATS,
+	IFLA_STATS_LINK_XSTATS_SLAVE,
+	IFLA_STATS_LINK_OFFLOAD_XSTATS,
+	IFLA_STATS_AF_SPEC,
+	__IFLA_STATS_MAX,
+};
+
+#define IFLA_STATS_MAX (__IFLA_STATS_MAX - 1)
+
+#define IFLA_STATS_FILTER_BIT(ATTR)	(1 << (ATTR - 1))
+
+/* These are embedded into IFLA_STATS_LINK_XSTATS:
+ * [IFLA_STATS_LINK_XSTATS]
+ * -> [LINK_XSTATS_TYPE_xxx]
+ *    -> [rtnl link type specific attributes]
+ */
+enum {
+	LINK_XSTATS_TYPE_UNSPEC,
+	LINK_XSTATS_TYPE_BRIDGE,
+	__LINK_XSTATS_TYPE_MAX
+};
+#define LINK_XSTATS_TYPE_MAX (__LINK_XSTATS_TYPE_MAX - 1)
+
+/* These are stats embedded into IFLA_STATS_LINK_OFFLOAD_XSTATS */
+enum {
+	IFLA_OFFLOAD_XSTATS_UNSPEC,
+	IFLA_OFFLOAD_XSTATS_CPU_HIT, /* struct rtnl_link_stats64 */
+	__IFLA_OFFLOAD_XSTATS_MAX
+};
+#define IFLA_OFFLOAD_XSTATS_MAX (__IFLA_OFFLOAD_XSTATS_MAX - 1)
+
+/* XDP section */
+
+#define XDP_FLAGS_UPDATE_IF_NOEXIST	(1U << 0)
+#define XDP_FLAGS_SKB_MODE		(1U << 1)
+#define XDP_FLAGS_DRV_MODE		(1U << 2)
+#define XDP_FLAGS_HW_MODE		(1U << 3)
+#define XDP_FLAGS_MODES			(XDP_FLAGS_SKB_MODE | \
+					 XDP_FLAGS_DRV_MODE | \
+					 XDP_FLAGS_HW_MODE)
+#define XDP_FLAGS_MASK			(XDP_FLAGS_UPDATE_IF_NOEXIST | \
+					 XDP_FLAGS_MODES)
+
+/* These are stored into IFLA_XDP_ATTACHED on dump. */
+enum {
+	XDP_ATTACHED_NONE = 0,
+	XDP_ATTACHED_DRV,
+	XDP_ATTACHED_SKB,
+	XDP_ATTACHED_HW,
+	XDP_ATTACHED_MULTI,
+};
+
+enum {
+	IFLA_XDP_UNSPEC,
+	IFLA_XDP_FD,
+	IFLA_XDP_ATTACHED,
+	IFLA_XDP_FLAGS,
+	IFLA_XDP_PROG_ID,
+	IFLA_XDP_DRV_PROG_ID,
+	IFLA_XDP_SKB_PROG_ID,
+	IFLA_XDP_HW_PROG_ID,
+	__IFLA_XDP_MAX,
+};
+
+#define IFLA_XDP_MAX (__IFLA_XDP_MAX - 1)
+
+enum {
+	IFLA_EVENT_NONE,
+	IFLA_EVENT_REBOOT,		/* internal reset / reboot */
+	IFLA_EVENT_FEATURES,		/* change in offload features */
+	IFLA_EVENT_BONDING_FAILOVER,	/* change in active slave */
+	IFLA_EVENT_NOTIFY_PEERS,	/* re-sent grat. arp/ndisc */
+	IFLA_EVENT_IGMP_RESEND,		/* re-sent IGMP JOIN */
+	IFLA_EVENT_BONDING_OPTIONS,	/* change in bonding options */
+};
+
+/* tun section */
+
+enum {
+	IFLA_TUN_UNSPEC,
+	IFLA_TUN_OWNER,
+	IFLA_TUN_GROUP,
+	IFLA_TUN_TYPE,
+	IFLA_TUN_PI,
+	IFLA_TUN_VNET_HDR,
+	IFLA_TUN_PERSIST,
+	IFLA_TUN_MULTI_QUEUE,
+	IFLA_TUN_NUM_QUEUES,
+	IFLA_TUN_NUM_DISABLED_QUEUES,
+	__IFLA_TUN_MAX,
+};
+
+#define IFLA_TUN_MAX (__IFLA_TUN_MAX - 1)
+
+/* rmnet section */
+
+#define RMNET_FLAGS_INGRESS_DEAGGREGATION         (1U << 0)
+#define RMNET_FLAGS_INGRESS_MAP_COMMANDS          (1U << 1)
+#define RMNET_FLAGS_INGRESS_MAP_CKSUMV4           (1U << 2)
+#define RMNET_FLAGS_EGRESS_MAP_CKSUMV4            (1U << 3)
+
+enum {
+	IFLA_RMNET_UNSPEC,
+	IFLA_RMNET_MUX_ID,
+	IFLA_RMNET_FLAGS,
+	__IFLA_RMNET_MAX,
+};
+
+#define IFLA_RMNET_MAX	(__IFLA_RMNET_MAX - 1)
+
+struct ifla_rmnet_flags {
+	__u32	flags;
+	__u32	mask;
+};
+
+#endif /* _UAPI_LINUX_IF_LINK_H */
diff --git a/tools/include/uapi/linux/in.h b/tools/include/uapi/linux/in.h
new file mode 100644
index 000000000..2a66ab49f
--- /dev/null
+++ b/tools/include/uapi/linux/in.h
@@ -0,0 +1,304 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions of the Internet Protocol.
+ *
+ * Version:	@(#)in.h	1.0.1	04/21/93
+ *
+ * Authors:	Original taken from the GNU Project <netinet/in.h> file.
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IN_H
+#define _UAPI_LINUX_IN_H
+
+#include <linux/types.h>
+#include <linux/libc-compat.h>
+#include <linux/socket.h>
+
+#if __UAPI_DEF_IN_IPPROTO
+/* Standard well-defined IP protocols.  */
+enum {
+  IPPROTO_IP = 0,		/* Dummy protocol for TCP		*/
+#define IPPROTO_IP		IPPROTO_IP
+  IPPROTO_ICMP = 1,		/* Internet Control Message Protocol	*/
+#define IPPROTO_ICMP		IPPROTO_ICMP
+  IPPROTO_IGMP = 2,		/* Internet Group Management Protocol	*/
+#define IPPROTO_IGMP		IPPROTO_IGMP
+  IPPROTO_IPIP = 4,		/* IPIP tunnels (older KA9Q tunnels use 94) */
+#define IPPROTO_IPIP		IPPROTO_IPIP
+  IPPROTO_TCP = 6,		/* Transmission Control Protocol	*/
+#define IPPROTO_TCP		IPPROTO_TCP
+  IPPROTO_EGP = 8,		/* Exterior Gateway Protocol		*/
+#define IPPROTO_EGP		IPPROTO_EGP
+  IPPROTO_PUP = 12,		/* PUP protocol				*/
+#define IPPROTO_PUP		IPPROTO_PUP
+  IPPROTO_UDP = 17,		/* User Datagram Protocol		*/
+#define IPPROTO_UDP		IPPROTO_UDP
+  IPPROTO_IDP = 22,		/* XNS IDP protocol			*/
+#define IPPROTO_IDP		IPPROTO_IDP
+  IPPROTO_TP = 29,		/* SO Transport Protocol Class 4	*/
+#define IPPROTO_TP		IPPROTO_TP
+  IPPROTO_DCCP = 33,		/* Datagram Congestion Control Protocol */
+#define IPPROTO_DCCP		IPPROTO_DCCP
+  IPPROTO_IPV6 = 41,		/* IPv6-in-IPv4 tunnelling		*/
+#define IPPROTO_IPV6		IPPROTO_IPV6
+  IPPROTO_RSVP = 46,		/* RSVP Protocol			*/
+#define IPPROTO_RSVP		IPPROTO_RSVP
+  IPPROTO_GRE = 47,		/* Cisco GRE tunnels (rfc 1701,1702)	*/
+#define IPPROTO_GRE		IPPROTO_GRE
+  IPPROTO_ESP = 50,		/* Encapsulation Security Payload protocol */
+#define IPPROTO_ESP		IPPROTO_ESP
+  IPPROTO_AH = 51,		/* Authentication Header protocol	*/
+#define IPPROTO_AH		IPPROTO_AH
+  IPPROTO_MTP = 92,		/* Multicast Transport Protocol		*/
+#define IPPROTO_MTP		IPPROTO_MTP
+  IPPROTO_BEETPH = 94,		/* IP option pseudo header for BEET	*/
+#define IPPROTO_BEETPH		IPPROTO_BEETPH
+  IPPROTO_ENCAP = 98,		/* Encapsulation Header			*/
+#define IPPROTO_ENCAP		IPPROTO_ENCAP
+  IPPROTO_PIM = 103,		/* Protocol Independent Multicast	*/
+#define IPPROTO_PIM		IPPROTO_PIM
+  IPPROTO_COMP = 108,		/* Compression Header Protocol		*/
+#define IPPROTO_COMP		IPPROTO_COMP
+  IPPROTO_SCTP = 132,		/* Stream Control Transport Protocol	*/
+#define IPPROTO_SCTP		IPPROTO_SCTP
+  IPPROTO_UDPLITE = 136,	/* UDP-Lite (RFC 3828)			*/
+#define IPPROTO_UDPLITE		IPPROTO_UDPLITE
+  IPPROTO_MPLS = 137,		/* MPLS in IP (RFC 4023)		*/
+#define IPPROTO_MPLS		IPPROTO_MPLS
+  IPPROTO_RAW = 255,		/* Raw IP packets			*/
+#define IPPROTO_RAW		IPPROTO_RAW
+  IPPROTO_MAX
+};
+#endif
+
+#if __UAPI_DEF_IN_ADDR
+/* Internet address. */
+struct in_addr {
+	__be32	s_addr;
+};
+#endif
+
+#define IP_TOS		1
+#define IP_TTL		2
+#define IP_HDRINCL	3
+#define IP_OPTIONS	4
+#define IP_ROUTER_ALERT	5
+#define IP_RECVOPTS	6
+#define IP_RETOPTS	7
+#define IP_PKTINFO	8
+#define IP_PKTOPTIONS	9
+#define IP_MTU_DISCOVER	10
+#define IP_RECVERR	11
+#define IP_RECVTTL	12
+#define	IP_RECVTOS	13
+#define IP_MTU		14
+#define IP_FREEBIND	15
+#define IP_IPSEC_POLICY	16
+#define IP_XFRM_POLICY	17
+#define IP_PASSSEC	18
+#define IP_TRANSPARENT	19
+
+/* BSD compatibility */
+#define IP_RECVRETOPTS	IP_RETOPTS
+
+/* TProxy original addresses */
+#define IP_ORIGDSTADDR       20
+#define IP_RECVORIGDSTADDR   IP_ORIGDSTADDR
+
+#define IP_MINTTL       21
+#define IP_NODEFRAG     22
+#define IP_CHECKSUM	23
+#define IP_BIND_ADDRESS_NO_PORT	24
+#define IP_RECVFRAGSIZE	25
+
+/* IP_MTU_DISCOVER values */
+#define IP_PMTUDISC_DONT		0	/* Never send DF frames */
+#define IP_PMTUDISC_WANT		1	/* Use per route hints	*/
+#define IP_PMTUDISC_DO			2	/* Always DF		*/
+#define IP_PMTUDISC_PROBE		3       /* Ignore dst pmtu      */
+/* Always use interface mtu (ignores dst pmtu) but don't set DF flag.
+ * Also incoming ICMP frag_needed notifications will be ignored on
+ * this socket to prevent accepting spoofed ones.
+ */
+#define IP_PMTUDISC_INTERFACE		4
+/* weaker version of IP_PMTUDISC_INTERFACE, which allos packets to get
+ * fragmented if they exeed the interface mtu
+ */
+#define IP_PMTUDISC_OMIT		5
+
+#define IP_MULTICAST_IF			32
+#define IP_MULTICAST_TTL 		33
+#define IP_MULTICAST_LOOP 		34
+#define IP_ADD_MEMBERSHIP		35
+#define IP_DROP_MEMBERSHIP		36
+#define IP_UNBLOCK_SOURCE		37
+#define IP_BLOCK_SOURCE			38
+#define IP_ADD_SOURCE_MEMBERSHIP	39
+#define IP_DROP_SOURCE_MEMBERSHIP	40
+#define IP_MSFILTER			41
+#define MCAST_JOIN_GROUP		42
+#define MCAST_BLOCK_SOURCE		43
+#define MCAST_UNBLOCK_SOURCE		44
+#define MCAST_LEAVE_GROUP		45
+#define MCAST_JOIN_SOURCE_GROUP		46
+#define MCAST_LEAVE_SOURCE_GROUP	47
+#define MCAST_MSFILTER			48
+#define IP_MULTICAST_ALL		49
+#define IP_UNICAST_IF			50
+
+#define MCAST_EXCLUDE	0
+#define MCAST_INCLUDE	1
+
+/* These need to appear somewhere around here */
+#define IP_DEFAULT_MULTICAST_TTL        1
+#define IP_DEFAULT_MULTICAST_LOOP       1
+
+/* Request struct for multicast socket ops */
+
+#if __UAPI_DEF_IP_MREQ
+struct ip_mreq  {
+	struct in_addr imr_multiaddr;	/* IP multicast address of group */
+	struct in_addr imr_interface;	/* local IP address of interface */
+};
+
+struct ip_mreqn {
+	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
+	struct in_addr	imr_address;		/* local IP address of interface */
+	int		imr_ifindex;		/* Interface index */
+};
+
+struct ip_mreq_source {
+	__be32		imr_multiaddr;
+	__be32		imr_interface;
+	__be32		imr_sourceaddr;
+};
+
+struct ip_msfilter {
+	__be32		imsf_multiaddr;
+	__be32		imsf_interface;
+	__u32		imsf_fmode;
+	__u32		imsf_numsrc;
+	__be32		imsf_slist[1];
+};
+
+#define IP_MSFILTER_SIZE(numsrc) \
+	(sizeof(struct ip_msfilter) - sizeof(__u32) \
+	+ (numsrc) * sizeof(__u32))
+
+struct group_req {
+	__u32				 gr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gr_group;	/* group address */
+};
+
+struct group_source_req {
+	__u32				 gsr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gsr_group;	/* group address */
+	struct __kernel_sockaddr_storage gsr_source;	/* source address */
+};
+
+struct group_filter {
+	__u32				 gf_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
+	__u32				 gf_fmode;	/* filter mode */
+	__u32				 gf_numsrc;	/* number of sources */
+	struct __kernel_sockaddr_storage gf_slist[1];	/* interface index */
+};
+
+#define GROUP_FILTER_SIZE(numsrc) \
+	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
+	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
+#endif
+
+#if __UAPI_DEF_IN_PKTINFO
+struct in_pktinfo {
+	int		ipi_ifindex;
+	struct in_addr	ipi_spec_dst;
+	struct in_addr	ipi_addr;
+};
+#endif
+
+/* Structure describing an Internet (IP) socket address. */
+#if  __UAPI_DEF_SOCKADDR_IN
+#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
+struct sockaddr_in {
+  __kernel_sa_family_t	sin_family;	/* Address family		*/
+  __be16		sin_port;	/* Port number			*/
+  struct in_addr	sin_addr;	/* Internet address		*/
+
+  /* Pad to size of `struct sockaddr'. */
+  unsigned char		__pad[__SOCK_SIZE__ - sizeof(short int) -
+			sizeof(unsigned short int) - sizeof(struct in_addr)];
+};
+#define sin_zero	__pad		/* for BSD UNIX comp. -FvK	*/
+#endif
+
+#if __UAPI_DEF_IN_CLASS
+/*
+ * Definitions of the bits in an Internet address integer.
+ * On subnets, host and network parts are found according
+ * to the subnet mask, not these masks.
+ */
+#define	IN_CLASSA(a)		((((long int) (a)) & 0x80000000) == 0)
+#define	IN_CLASSA_NET		0xff000000
+#define	IN_CLASSA_NSHIFT	24
+#define	IN_CLASSA_HOST		(0xffffffff & ~IN_CLASSA_NET)
+#define	IN_CLASSA_MAX		128
+
+#define	IN_CLASSB(a)		((((long int) (a)) & 0xc0000000) == 0x80000000)
+#define	IN_CLASSB_NET		0xffff0000
+#define	IN_CLASSB_NSHIFT	16
+#define	IN_CLASSB_HOST		(0xffffffff & ~IN_CLASSB_NET)
+#define	IN_CLASSB_MAX		65536
+
+#define	IN_CLASSC(a)		((((long int) (a)) & 0xe0000000) == 0xc0000000)
+#define	IN_CLASSC_NET		0xffffff00
+#define	IN_CLASSC_NSHIFT	8
+#define	IN_CLASSC_HOST		(0xffffffff & ~IN_CLASSC_NET)
+
+#define	IN_CLASSD(a)		((((long int) (a)) & 0xf0000000) == 0xe0000000)
+#define	IN_MULTICAST(a)		IN_CLASSD(a)
+#define IN_MULTICAST_NET	0xF0000000
+
+#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
+#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
+
+/* Address to accept any incoming messages. */
+#define	INADDR_ANY		((unsigned long int) 0x00000000)
+
+/* Address to send to all hosts. */
+#define	INADDR_BROADCAST	((unsigned long int) 0xffffffff)
+
+/* Address indicating an error return. */
+#define	INADDR_NONE		((unsigned long int) 0xffffffff)
+
+/* Dummy address for src of ICMP replies if no real address is set (RFC7600). */
+#define	INADDR_DUMMY		((unsigned long int) 0xc0000008)
+
+/* Network number for local host loopback. */
+#define	IN_LOOPBACKNET		127
+
+/* Address to loopback in software to local host.  */
+#define	INADDR_LOOPBACK		0x7f000001	/* 127.0.0.1   */
+#define	IN_LOOPBACK(a)		((((long int) (a)) & 0xff000000) == 0x7f000000)
+
+/* Defines for Multicast INADDR */
+#define INADDR_UNSPEC_GROUP   	0xe0000000U	/* 224.0.0.0   */
+#define INADDR_ALLHOSTS_GROUP 	0xe0000001U	/* 224.0.0.1   */
+#define INADDR_ALLRTRS_GROUP    0xe0000002U	/* 224.0.0.2 */
+#define INADDR_MAX_LOCAL_GROUP  0xe00000ffU	/* 224.0.0.255 */
+#endif
+
+/* <asm/byteorder.h> contains the htonl type stuff.. */
+#include <asm/byteorder.h> 
+
+
+#endif /* _UAPI_LINUX_IN_H */
diff --git a/tools/include/uapi/linux/kcmp.h b/tools/include/uapi/linux/kcmp.h
new file mode 100644
index 000000000..ef1305010
--- /dev/null
+++ b/tools/include/uapi/linux/kcmp.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_KCMP_H
+#define _UAPI_LINUX_KCMP_H
+
+#include <linux/types.h>
+
+/* Comparison type */
+enum kcmp_type {
+	KCMP_FILE,
+	KCMP_VM,
+	KCMP_FILES,
+	KCMP_FS,
+	KCMP_SIGHAND,
+	KCMP_IO,
+	KCMP_SYSVSEM,
+	KCMP_EPOLL_TFD,
+
+	KCMP_TYPES,
+};
+
+/* Slot for KCMP_EPOLL_TFD */
+struct kcmp_epoll_slot {
+	__u32 efd;		/* epoll file descriptor */
+	__u32 tfd;		/* target file number */
+	__u32 toff;		/* target offset within same numbered sequence */
+};
+
+#endif /* _UAPI_LINUX_KCMP_H */
diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h
new file mode 100644
index 000000000..251be353f
--- /dev/null
+++ b/tools/include/uapi/linux/kvm.h
@@ -0,0 +1,1552 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __LINUX_KVM_H
+#define __LINUX_KVM_H
+
+/*
+ * Userspace interface for /dev/kvm - kernel based virtual machine
+ *
+ * Note: you must update KVM_API_VERSION if you change this interface.
+ */
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <asm/kvm.h>
+
+#define KVM_API_VERSION 12
+
+/* *** Deprecated interfaces *** */
+
+#define KVM_TRC_SHIFT           16
+
+#define KVM_TRC_ENTRYEXIT       (1 << KVM_TRC_SHIFT)
+#define KVM_TRC_HANDLER         (1 << (KVM_TRC_SHIFT + 1))
+
+#define KVM_TRC_VMENTRY         (KVM_TRC_ENTRYEXIT + 0x01)
+#define KVM_TRC_VMEXIT          (KVM_TRC_ENTRYEXIT + 0x02)
+#define KVM_TRC_PAGE_FAULT      (KVM_TRC_HANDLER + 0x01)
+
+#define KVM_TRC_HEAD_SIZE       12
+#define KVM_TRC_CYCLE_SIZE      8
+#define KVM_TRC_EXTRA_MAX       7
+
+#define KVM_TRC_INJ_VIRQ         (KVM_TRC_HANDLER + 0x02)
+#define KVM_TRC_REDELIVER_EVT    (KVM_TRC_HANDLER + 0x03)
+#define KVM_TRC_PEND_INTR        (KVM_TRC_HANDLER + 0x04)
+#define KVM_TRC_IO_READ          (KVM_TRC_HANDLER + 0x05)
+#define KVM_TRC_IO_WRITE         (KVM_TRC_HANDLER + 0x06)
+#define KVM_TRC_CR_READ          (KVM_TRC_HANDLER + 0x07)
+#define KVM_TRC_CR_WRITE         (KVM_TRC_HANDLER + 0x08)
+#define KVM_TRC_DR_READ          (KVM_TRC_HANDLER + 0x09)
+#define KVM_TRC_DR_WRITE         (KVM_TRC_HANDLER + 0x0A)
+#define KVM_TRC_MSR_READ         (KVM_TRC_HANDLER + 0x0B)
+#define KVM_TRC_MSR_WRITE        (KVM_TRC_HANDLER + 0x0C)
+#define KVM_TRC_CPUID            (KVM_TRC_HANDLER + 0x0D)
+#define KVM_TRC_INTR             (KVM_TRC_HANDLER + 0x0E)
+#define KVM_TRC_NMI              (KVM_TRC_HANDLER + 0x0F)
+#define KVM_TRC_VMMCALL          (KVM_TRC_HANDLER + 0x10)
+#define KVM_TRC_HLT              (KVM_TRC_HANDLER + 0x11)
+#define KVM_TRC_CLTS             (KVM_TRC_HANDLER + 0x12)
+#define KVM_TRC_LMSW             (KVM_TRC_HANDLER + 0x13)
+#define KVM_TRC_APIC_ACCESS      (KVM_TRC_HANDLER + 0x14)
+#define KVM_TRC_TDP_FAULT        (KVM_TRC_HANDLER + 0x15)
+#define KVM_TRC_GTLB_WRITE       (KVM_TRC_HANDLER + 0x16)
+#define KVM_TRC_STLB_WRITE       (KVM_TRC_HANDLER + 0x17)
+#define KVM_TRC_STLB_INVAL       (KVM_TRC_HANDLER + 0x18)
+#define KVM_TRC_PPC_INSTR        (KVM_TRC_HANDLER + 0x19)
+
+struct kvm_user_trace_setup {
+	__u32 buf_size;
+	__u32 buf_nr;
+};
+
+#define __KVM_DEPRECATED_MAIN_W_0x06 \
+	_IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
+#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
+#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
+
+#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
+
+struct kvm_breakpoint {
+	__u32 enabled;
+	__u32 padding;
+	__u64 address;
+};
+
+struct kvm_debug_guest {
+	__u32 enabled;
+	__u32 pad;
+	struct kvm_breakpoint breakpoints[4];
+	__u32 singlestep;
+};
+
+#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
+
+/* *** End of deprecated interfaces *** */
+
+
+/* for KVM_CREATE_MEMORY_REGION */
+struct kvm_memory_region {
+	__u32 slot;
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size; /* bytes */
+};
+
+/* for KVM_SET_USER_MEMORY_REGION */
+struct kvm_userspace_memory_region {
+	__u32 slot;
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size; /* bytes */
+	__u64 userspace_addr; /* start of the userspace allocated memory */
+};
+
+/*
+ * The bit 0 ~ bit 15 of kvm_memory_region::flags are visible for userspace,
+ * other bits are reserved for kvm internal use which are defined in
+ * include/linux/kvm_host.h.
+ */
+#define KVM_MEM_LOG_DIRTY_PAGES	(1UL << 0)
+#define KVM_MEM_READONLY	(1UL << 1)
+
+/* for KVM_IRQ_LINE */
+struct kvm_irq_level {
+	/*
+	 * ACPI gsi notion of irq.
+	 * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
+	 * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
+	 * For ARM: See Documentation/virtual/kvm/api.txt
+	 */
+	union {
+		__u32 irq;
+		__s32 status;
+	};
+	__u32 level;
+};
+
+
+struct kvm_irqchip {
+	__u32 chip_id;
+	__u32 pad;
+        union {
+		char dummy[512];  /* reserving space */
+#ifdef __KVM_HAVE_PIT
+		struct kvm_pic_state pic;
+#endif
+#ifdef __KVM_HAVE_IOAPIC
+		struct kvm_ioapic_state ioapic;
+#endif
+	} chip;
+};
+
+/* for KVM_CREATE_PIT2 */
+struct kvm_pit_config {
+	__u32 flags;
+	__u32 pad[15];
+};
+
+#define KVM_PIT_SPEAKER_DUMMY     1
+
+struct kvm_s390_skeys {
+	__u64 start_gfn;
+	__u64 count;
+	__u64 skeydata_addr;
+	__u32 flags;
+	__u32 reserved[9];
+};
+
+#define KVM_S390_CMMA_PEEK (1 << 0)
+
+/**
+ * kvm_s390_cmma_log - Used for CMMA migration.
+ *
+ * Used both for input and output.
+ *
+ * @start_gfn: Guest page number to start from.
+ * @count: Size of the result buffer.
+ * @flags: Control operation mode via KVM_S390_CMMA_* flags
+ * @remaining: Used with KVM_S390_GET_CMMA_BITS. Indicates how many dirty
+ *             pages are still remaining.
+ * @mask: Used with KVM_S390_SET_CMMA_BITS. Bitmap of bits to actually set
+ *        in the PGSTE.
+ * @values: Pointer to the values buffer.
+ *
+ * Used in KVM_S390_{G,S}ET_CMMA_BITS ioctls.
+ */
+struct kvm_s390_cmma_log {
+	__u64 start_gfn;
+	__u32 count;
+	__u32 flags;
+	union {
+		__u64 remaining;
+		__u64 mask;
+	};
+	__u64 values;
+};
+
+struct kvm_hyperv_exit {
+#define KVM_EXIT_HYPERV_SYNIC          1
+#define KVM_EXIT_HYPERV_HCALL          2
+	__u32 type;
+	union {
+		struct {
+			__u32 msr;
+			__u64 control;
+			__u64 evt_page;
+			__u64 msg_page;
+		} synic;
+		struct {
+			__u64 input;
+			__u64 result;
+			__u64 params[2];
+		} hcall;
+	} u;
+};
+
+#define KVM_S390_GET_SKEYS_NONE   1
+#define KVM_S390_SKEYS_MAX        1048576
+
+#define KVM_EXIT_UNKNOWN          0
+#define KVM_EXIT_EXCEPTION        1
+#define KVM_EXIT_IO               2
+#define KVM_EXIT_HYPERCALL        3
+#define KVM_EXIT_DEBUG            4
+#define KVM_EXIT_HLT              5
+#define KVM_EXIT_MMIO             6
+#define KVM_EXIT_IRQ_WINDOW_OPEN  7
+#define KVM_EXIT_SHUTDOWN         8
+#define KVM_EXIT_FAIL_ENTRY       9
+#define KVM_EXIT_INTR             10
+#define KVM_EXIT_SET_TPR          11
+#define KVM_EXIT_TPR_ACCESS       12
+#define KVM_EXIT_S390_SIEIC       13
+#define KVM_EXIT_S390_RESET       14
+#define KVM_EXIT_DCR              15 /* deprecated */
+#define KVM_EXIT_NMI              16
+#define KVM_EXIT_INTERNAL_ERROR   17
+#define KVM_EXIT_OSI              18
+#define KVM_EXIT_PAPR_HCALL	  19
+#define KVM_EXIT_S390_UCONTROL	  20
+#define KVM_EXIT_WATCHDOG         21
+#define KVM_EXIT_S390_TSCH        22
+#define KVM_EXIT_EPR              23
+#define KVM_EXIT_SYSTEM_EVENT     24
+#define KVM_EXIT_S390_STSI        25
+#define KVM_EXIT_IOAPIC_EOI       26
+#define KVM_EXIT_HYPERV           27
+
+/* For KVM_EXIT_INTERNAL_ERROR */
+/* Emulate instruction failed. */
+#define KVM_INTERNAL_ERROR_EMULATION	1
+/* Encounter unexpected simultaneous exceptions. */
+#define KVM_INTERNAL_ERROR_SIMUL_EX	2
+/* Encounter unexpected vm-exit due to delivery event. */
+#define KVM_INTERNAL_ERROR_DELIVERY_EV	3
+
+/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
+struct kvm_run {
+	/* in */
+	__u8 request_interrupt_window;
+	__u8 immediate_exit;
+	__u8 padding1[6];
+
+	/* out */
+	__u32 exit_reason;
+	__u8 ready_for_interrupt_injection;
+	__u8 if_flag;
+	__u16 flags;
+
+	/* in (pre_kvm_run), out (post_kvm_run) */
+	__u64 cr8;
+	__u64 apic_base;
+
+#ifdef __KVM_S390
+	/* the processor status word for s390 */
+	__u64 psw_mask; /* psw upper half */
+	__u64 psw_addr; /* psw lower half */
+#endif
+	union {
+		/* KVM_EXIT_UNKNOWN */
+		struct {
+			__u64 hardware_exit_reason;
+		} hw;
+		/* KVM_EXIT_FAIL_ENTRY */
+		struct {
+			__u64 hardware_entry_failure_reason;
+		} fail_entry;
+		/* KVM_EXIT_EXCEPTION */
+		struct {
+			__u32 exception;
+			__u32 error_code;
+		} ex;
+		/* KVM_EXIT_IO */
+		struct {
+#define KVM_EXIT_IO_IN  0
+#define KVM_EXIT_IO_OUT 1
+			__u8 direction;
+			__u8 size; /* bytes */
+			__u16 port;
+			__u32 count;
+			__u64 data_offset; /* relative to kvm_run start */
+		} io;
+		/* KVM_EXIT_DEBUG */
+		struct {
+			struct kvm_debug_exit_arch arch;
+		} debug;
+		/* KVM_EXIT_MMIO */
+		struct {
+			__u64 phys_addr;
+			__u8  data[8];
+			__u32 len;
+			__u8  is_write;
+		} mmio;
+		/* KVM_EXIT_HYPERCALL */
+		struct {
+			__u64 nr;
+			__u64 args[6];
+			__u64 ret;
+			__u32 longmode;
+			__u32 pad;
+		} hypercall;
+		/* KVM_EXIT_TPR_ACCESS */
+		struct {
+			__u64 rip;
+			__u32 is_write;
+			__u32 pad;
+		} tpr_access;
+		/* KVM_EXIT_S390_SIEIC */
+		struct {
+			__u8 icptcode;
+			__u16 ipa;
+			__u32 ipb;
+		} s390_sieic;
+		/* KVM_EXIT_S390_RESET */
+#define KVM_S390_RESET_POR       1
+#define KVM_S390_RESET_CLEAR     2
+#define KVM_S390_RESET_SUBSYSTEM 4
+#define KVM_S390_RESET_CPU_INIT  8
+#define KVM_S390_RESET_IPL       16
+		__u64 s390_reset_flags;
+		/* KVM_EXIT_S390_UCONTROL */
+		struct {
+			__u64 trans_exc_code;
+			__u32 pgm_code;
+		} s390_ucontrol;
+		/* KVM_EXIT_DCR (deprecated) */
+		struct {
+			__u32 dcrn;
+			__u32 data;
+			__u8  is_write;
+		} dcr;
+		/* KVM_EXIT_INTERNAL_ERROR */
+		struct {
+			__u32 suberror;
+			/* Available with KVM_CAP_INTERNAL_ERROR_DATA: */
+			__u32 ndata;
+			__u64 data[16];
+		} internal;
+		/* KVM_EXIT_OSI */
+		struct {
+			__u64 gprs[32];
+		} osi;
+		/* KVM_EXIT_PAPR_HCALL */
+		struct {
+			__u64 nr;
+			__u64 ret;
+			__u64 args[9];
+		} papr_hcall;
+		/* KVM_EXIT_S390_TSCH */
+		struct {
+			__u16 subchannel_id;
+			__u16 subchannel_nr;
+			__u32 io_int_parm;
+			__u32 io_int_word;
+			__u32 ipb;
+			__u8 dequeued;
+		} s390_tsch;
+		/* KVM_EXIT_EPR */
+		struct {
+			__u32 epr;
+		} epr;
+		/* KVM_EXIT_SYSTEM_EVENT */
+		struct {
+#define KVM_SYSTEM_EVENT_SHUTDOWN       1
+#define KVM_SYSTEM_EVENT_RESET          2
+#define KVM_SYSTEM_EVENT_CRASH          3
+			__u32 type;
+			__u64 flags;
+		} system_event;
+		/* KVM_EXIT_S390_STSI */
+		struct {
+			__u64 addr;
+			__u8 ar;
+			__u8 reserved;
+			__u8 fc;
+			__u8 sel1;
+			__u16 sel2;
+		} s390_stsi;
+		/* KVM_EXIT_IOAPIC_EOI */
+		struct {
+			__u8 vector;
+		} eoi;
+		/* KVM_EXIT_HYPERV */
+		struct kvm_hyperv_exit hyperv;
+		/* Fix the size of the union. */
+		char padding[256];
+	};
+
+	/* 2048 is the size of the char array used to bound/pad the size
+	 * of the union that holds sync regs.
+	 */
+	#define SYNC_REGS_SIZE_BYTES 2048
+	/*
+	 * shared registers between kvm and userspace.
+	 * kvm_valid_regs specifies the register classes set by the host
+	 * kvm_dirty_regs specified the register classes dirtied by userspace
+	 * struct kvm_sync_regs is architecture specific, as well as the
+	 * bits for kvm_valid_regs and kvm_dirty_regs
+	 */
+	__u64 kvm_valid_regs;
+	__u64 kvm_dirty_regs;
+	union {
+		struct kvm_sync_regs regs;
+		char padding[SYNC_REGS_SIZE_BYTES];
+	} s;
+};
+
+/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */
+
+struct kvm_coalesced_mmio_zone {
+	__u64 addr;
+	__u32 size;
+	__u32 pad;
+};
+
+struct kvm_coalesced_mmio {
+	__u64 phys_addr;
+	__u32 len;
+	__u32 pad;
+	__u8  data[8];
+};
+
+struct kvm_coalesced_mmio_ring {
+	__u32 first, last;
+	struct kvm_coalesced_mmio coalesced_mmio[0];
+};
+
+#define KVM_COALESCED_MMIO_MAX \
+	((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \
+	 sizeof(struct kvm_coalesced_mmio))
+
+/* for KVM_TRANSLATE */
+struct kvm_translation {
+	/* in */
+	__u64 linear_address;
+
+	/* out */
+	__u64 physical_address;
+	__u8  valid;
+	__u8  writeable;
+	__u8  usermode;
+	__u8  pad[5];
+};
+
+/* for KVM_S390_MEM_OP */
+struct kvm_s390_mem_op {
+	/* in */
+	__u64 gaddr;		/* the guest address */
+	__u64 flags;		/* flags */
+	__u32 size;		/* amount of bytes */
+	__u32 op;		/* type of operation */
+	__u64 buf;		/* buffer in userspace */
+	__u8 ar;		/* the access register number */
+	__u8 reserved[31];	/* should be set to 0 */
+};
+/* types for kvm_s390_mem_op->op */
+#define KVM_S390_MEMOP_LOGICAL_READ	0
+#define KVM_S390_MEMOP_LOGICAL_WRITE	1
+/* flags for kvm_s390_mem_op->flags */
+#define KVM_S390_MEMOP_F_CHECK_ONLY		(1ULL << 0)
+#define KVM_S390_MEMOP_F_INJECT_EXCEPTION	(1ULL << 1)
+
+/* for KVM_INTERRUPT */
+struct kvm_interrupt {
+	/* in */
+	__u32 irq;
+};
+
+/* for KVM_GET_DIRTY_LOG */
+struct kvm_dirty_log {
+	__u32 slot;
+	__u32 padding1;
+	union {
+		void __user *dirty_bitmap; /* one bit per page */
+		__u64 padding2;
+	};
+};
+
+/* for KVM_SET_SIGNAL_MASK */
+struct kvm_signal_mask {
+	__u32 len;
+	__u8  sigset[0];
+};
+
+/* for KVM_TPR_ACCESS_REPORTING */
+struct kvm_tpr_access_ctl {
+	__u32 enabled;
+	__u32 flags;
+	__u32 reserved[8];
+};
+
+/* for KVM_SET_VAPIC_ADDR */
+struct kvm_vapic_addr {
+	__u64 vapic_addr;
+};
+
+/* for KVM_SET_MP_STATE */
+
+/* not all states are valid on all architectures */
+#define KVM_MP_STATE_RUNNABLE          0
+#define KVM_MP_STATE_UNINITIALIZED     1
+#define KVM_MP_STATE_INIT_RECEIVED     2
+#define KVM_MP_STATE_HALTED            3
+#define KVM_MP_STATE_SIPI_RECEIVED     4
+#define KVM_MP_STATE_STOPPED           5
+#define KVM_MP_STATE_CHECK_STOP        6
+#define KVM_MP_STATE_OPERATING         7
+#define KVM_MP_STATE_LOAD              8
+
+struct kvm_mp_state {
+	__u32 mp_state;
+};
+
+struct kvm_s390_psw {
+	__u64 mask;
+	__u64 addr;
+};
+
+/* valid values for type in kvm_s390_interrupt */
+#define KVM_S390_SIGP_STOP		0xfffe0000u
+#define KVM_S390_PROGRAM_INT		0xfffe0001u
+#define KVM_S390_SIGP_SET_PREFIX	0xfffe0002u
+#define KVM_S390_RESTART		0xfffe0003u
+#define KVM_S390_INT_PFAULT_INIT	0xfffe0004u
+#define KVM_S390_INT_PFAULT_DONE	0xfffe0005u
+#define KVM_S390_MCHK			0xfffe1000u
+#define KVM_S390_INT_CLOCK_COMP		0xffff1004u
+#define KVM_S390_INT_CPU_TIMER		0xffff1005u
+#define KVM_S390_INT_VIRTIO		0xffff2603u
+#define KVM_S390_INT_SERVICE		0xffff2401u
+#define KVM_S390_INT_EMERGENCY		0xffff1201u
+#define KVM_S390_INT_EXTERNAL_CALL	0xffff1202u
+/* Anything below 0xfffe0000u is taken by INT_IO */
+#define KVM_S390_INT_IO(ai,cssid,ssid,schid)   \
+	(((schid)) |			       \
+	 ((ssid) << 16) |		       \
+	 ((cssid) << 18) |		       \
+	 ((ai) << 26))
+#define KVM_S390_INT_IO_MIN		0x00000000u
+#define KVM_S390_INT_IO_MAX		0xfffdffffu
+#define KVM_S390_INT_IO_AI_MASK		0x04000000u
+
+
+struct kvm_s390_interrupt {
+	__u32 type;
+	__u32 parm;
+	__u64 parm64;
+};
+
+struct kvm_s390_io_info {
+	__u16 subchannel_id;
+	__u16 subchannel_nr;
+	__u32 io_int_parm;
+	__u32 io_int_word;
+};
+
+struct kvm_s390_ext_info {
+	__u32 ext_params;
+	__u32 pad;
+	__u64 ext_params2;
+};
+
+struct kvm_s390_pgm_info {
+	__u64 trans_exc_code;
+	__u64 mon_code;
+	__u64 per_address;
+	__u32 data_exc_code;
+	__u16 code;
+	__u16 mon_class_nr;
+	__u8 per_code;
+	__u8 per_atmid;
+	__u8 exc_access_id;
+	__u8 per_access_id;
+	__u8 op_access_id;
+#define KVM_S390_PGM_FLAGS_ILC_VALID	0x01
+#define KVM_S390_PGM_FLAGS_ILC_0	0x02
+#define KVM_S390_PGM_FLAGS_ILC_1	0x04
+#define KVM_S390_PGM_FLAGS_ILC_MASK	0x06
+#define KVM_S390_PGM_FLAGS_NO_REWIND	0x08
+	__u8 flags;
+	__u8 pad[2];
+};
+
+struct kvm_s390_prefix_info {
+	__u32 address;
+};
+
+struct kvm_s390_extcall_info {
+	__u16 code;
+};
+
+struct kvm_s390_emerg_info {
+	__u16 code;
+};
+
+#define KVM_S390_STOP_FLAG_STORE_STATUS	0x01
+struct kvm_s390_stop_info {
+	__u32 flags;
+};
+
+struct kvm_s390_mchk_info {
+	__u64 cr14;
+	__u64 mcic;
+	__u64 failing_storage_address;
+	__u32 ext_damage_code;
+	__u32 pad;
+	__u8 fixed_logout[16];
+};
+
+struct kvm_s390_irq {
+	__u64 type;
+	union {
+		struct kvm_s390_io_info io;
+		struct kvm_s390_ext_info ext;
+		struct kvm_s390_pgm_info pgm;
+		struct kvm_s390_emerg_info emerg;
+		struct kvm_s390_extcall_info extcall;
+		struct kvm_s390_prefix_info prefix;
+		struct kvm_s390_stop_info stop;
+		struct kvm_s390_mchk_info mchk;
+		char reserved[64];
+	} u;
+};
+
+struct kvm_s390_irq_state {
+	__u64 buf;
+	__u32 flags;        /* will stay unused for compatibility reasons */
+	__u32 len;
+	__u32 reserved[4];  /* will stay unused for compatibility reasons */
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+
+#define KVM_GUESTDBG_ENABLE		0x00000001
+#define KVM_GUESTDBG_SINGLESTEP		0x00000002
+
+struct kvm_guest_debug {
+	__u32 control;
+	__u32 pad;
+	struct kvm_guest_debug_arch arch;
+};
+
+enum {
+	kvm_ioeventfd_flag_nr_datamatch,
+	kvm_ioeventfd_flag_nr_pio,
+	kvm_ioeventfd_flag_nr_deassign,
+	kvm_ioeventfd_flag_nr_virtio_ccw_notify,
+	kvm_ioeventfd_flag_nr_fast_mmio,
+	kvm_ioeventfd_flag_nr_max,
+};
+
+#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
+#define KVM_IOEVENTFD_FLAG_PIO       (1 << kvm_ioeventfd_flag_nr_pio)
+#define KVM_IOEVENTFD_FLAG_DEASSIGN  (1 << kvm_ioeventfd_flag_nr_deassign)
+#define KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY \
+	(1 << kvm_ioeventfd_flag_nr_virtio_ccw_notify)
+
+#define KVM_IOEVENTFD_VALID_FLAG_MASK  ((1 << kvm_ioeventfd_flag_nr_max) - 1)
+
+struct kvm_ioeventfd {
+	__u64 datamatch;
+	__u64 addr;        /* legal pio/mmio address */
+	__u32 len;         /* 1, 2, 4, or 8 bytes; or 0 to ignore length */
+	__s32 fd;
+	__u32 flags;
+	__u8  pad[36];
+};
+
+#define KVM_X86_DISABLE_EXITS_MWAIT          (1 << 0)
+#define KVM_X86_DISABLE_EXITS_HLT            (1 << 1)
+#define KVM_X86_DISABLE_EXITS_PAUSE          (1 << 2)
+#define KVM_X86_DISABLE_VALID_EXITS          (KVM_X86_DISABLE_EXITS_MWAIT | \
+                                              KVM_X86_DISABLE_EXITS_HLT | \
+                                              KVM_X86_DISABLE_EXITS_PAUSE)
+
+/* for KVM_ENABLE_CAP */
+struct kvm_enable_cap {
+	/* in */
+	__u32 cap;
+	__u32 flags;
+	__u64 args[4];
+	__u8  pad[64];
+};
+
+/* for KVM_PPC_GET_PVINFO */
+
+#define KVM_PPC_PVINFO_FLAGS_EV_IDLE   (1<<0)
+
+struct kvm_ppc_pvinfo {
+	/* out */
+	__u32 flags;
+	__u32 hcall[4];
+	__u8  pad[108];
+};
+
+/* for KVM_PPC_GET_SMMU_INFO */
+#define KVM_PPC_PAGE_SIZES_MAX_SZ	8
+
+struct kvm_ppc_one_page_size {
+	__u32 page_shift;	/* Page shift (or 0) */
+	__u32 pte_enc;		/* Encoding in the HPTE (>>12) */
+};
+
+struct kvm_ppc_one_seg_page_size {
+	__u32 page_shift;	/* Base page shift of segment (or 0) */
+	__u32 slb_enc;		/* SLB encoding for BookS */
+	struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ];
+};
+
+#define KVM_PPC_PAGE_SIZES_REAL		0x00000001
+#define KVM_PPC_1T_SEGMENTS		0x00000002
+
+struct kvm_ppc_smmu_info {
+	__u64 flags;
+	__u32 slb_size;
+	__u16 data_keys;	/* # storage keys supported for data */
+	__u16 instr_keys;	/* # storage keys supported for instructions */
+	struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ];
+};
+
+/* for KVM_PPC_RESIZE_HPT_{PREPARE,COMMIT} */
+struct kvm_ppc_resize_hpt {
+	__u64 flags;
+	__u32 shift;
+	__u32 pad;
+};
+
+#define KVMIO 0xAE
+
+/* machine type bits, to be used as argument to KVM_CREATE_VM */
+#define KVM_VM_S390_UCONTROL	1
+
+/* on ppc, 0 indicate default, 1 should force HV and 2 PR */
+#define KVM_VM_PPC_HV 1
+#define KVM_VM_PPC_PR 2
+
+/* on MIPS, 0 forces trap & emulate, 1 forces VZ ASE */
+#define KVM_VM_MIPS_TE		0
+#define KVM_VM_MIPS_VZ		1
+
+#define KVM_S390_SIE_PAGE_OFFSET 1
+
+/*
+ * ioctls for /dev/kvm fds:
+ */
+#define KVM_GET_API_VERSION       _IO(KVMIO,   0x00)
+#define KVM_CREATE_VM             _IO(KVMIO,   0x01) /* returns a VM fd */
+#define KVM_GET_MSR_INDEX_LIST    _IOWR(KVMIO, 0x02, struct kvm_msr_list)
+
+#define KVM_S390_ENABLE_SIE       _IO(KVMIO,   0x06)
+/*
+ * Check if a kvm extension is available.  Argument is extension number,
+ * return is 1 (yes) or 0 (no, sorry).
+ */
+#define KVM_CHECK_EXTENSION       _IO(KVMIO,   0x03)
+/*
+ * Get size for mmap(vcpu_fd)
+ */
+#define KVM_GET_VCPU_MMAP_SIZE    _IO(KVMIO,   0x04) /* in bytes */
+#define KVM_GET_SUPPORTED_CPUID   _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
+#define KVM_TRACE_ENABLE          __KVM_DEPRECATED_MAIN_W_0x06
+#define KVM_TRACE_PAUSE           __KVM_DEPRECATED_MAIN_0x07
+#define KVM_TRACE_DISABLE         __KVM_DEPRECATED_MAIN_0x08
+#define KVM_GET_EMULATED_CPUID	  _IOWR(KVMIO, 0x09, struct kvm_cpuid2)
+#define KVM_GET_MSR_FEATURE_INDEX_LIST    _IOWR(KVMIO, 0x0a, struct kvm_msr_list)
+
+/*
+ * Extension capability list.
+ */
+#define KVM_CAP_IRQCHIP	  0
+#define KVM_CAP_HLT	  1
+#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2
+#define KVM_CAP_USER_MEMORY 3
+#define KVM_CAP_SET_TSS_ADDR 4
+#define KVM_CAP_VAPIC 6
+#define KVM_CAP_EXT_CPUID 7
+#define KVM_CAP_CLOCKSOURCE 8
+#define KVM_CAP_NR_VCPUS 9       /* returns recommended max vcpus per vm */
+#define KVM_CAP_NR_MEMSLOTS 10   /* returns max memory slots per vm */
+#define KVM_CAP_PIT 11
+#define KVM_CAP_NOP_IO_DELAY 12
+#define KVM_CAP_PV_MMU 13
+#define KVM_CAP_MP_STATE 14
+#define KVM_CAP_COALESCED_MMIO 15
+#define KVM_CAP_SYNC_MMU 16  /* Changes to host mmap are reflected in guest */
+#define KVM_CAP_IOMMU 18
+/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
+#define KVM_CAP_USER_NMI 22
+#ifdef __KVM_HAVE_GUEST_DEBUG
+#define KVM_CAP_SET_GUEST_DEBUG 23
+#endif
+#ifdef __KVM_HAVE_PIT
+#define KVM_CAP_REINJECT_CONTROL 24
+#endif
+#define KVM_CAP_IRQ_ROUTING 25
+#define KVM_CAP_IRQ_INJECT_STATUS 26
+#define KVM_CAP_ASSIGN_DEV_IRQ 29
+/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
+#ifdef __KVM_HAVE_MCE
+#define KVM_CAP_MCE 31
+#endif
+#define KVM_CAP_IRQFD 32
+#ifdef __KVM_HAVE_PIT
+#define KVM_CAP_PIT2 33
+#endif
+#define KVM_CAP_SET_BOOT_CPU_ID 34
+#ifdef __KVM_HAVE_PIT_STATE2
+#define KVM_CAP_PIT_STATE2 35
+#endif
+#define KVM_CAP_IOEVENTFD 36
+#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
+#ifdef __KVM_HAVE_XEN_HVM
+#define KVM_CAP_XEN_HVM 38
+#endif
+#define KVM_CAP_ADJUST_CLOCK 39
+#define KVM_CAP_INTERNAL_ERROR_DATA 40
+#ifdef __KVM_HAVE_VCPU_EVENTS
+#define KVM_CAP_VCPU_EVENTS 41
+#endif
+#define KVM_CAP_S390_PSW 42
+#define KVM_CAP_PPC_SEGSTATE 43
+#define KVM_CAP_HYPERV 44
+#define KVM_CAP_HYPERV_VAPIC 45
+#define KVM_CAP_HYPERV_SPIN 46
+#define KVM_CAP_PCI_SEGMENT 47
+#define KVM_CAP_PPC_PAIRED_SINGLES 48
+#define KVM_CAP_INTR_SHADOW 49
+#ifdef __KVM_HAVE_DEBUGREGS
+#define KVM_CAP_DEBUGREGS 50
+#endif
+#define KVM_CAP_X86_ROBUST_SINGLESTEP 51
+#define KVM_CAP_PPC_OSI 52
+#define KVM_CAP_PPC_UNSET_IRQ 53
+#define KVM_CAP_ENABLE_CAP 54
+#ifdef __KVM_HAVE_XSAVE
+#define KVM_CAP_XSAVE 55
+#endif
+#ifdef __KVM_HAVE_XCRS
+#define KVM_CAP_XCRS 56
+#endif
+#define KVM_CAP_PPC_GET_PVINFO 57
+#define KVM_CAP_PPC_IRQ_LEVEL 58
+#define KVM_CAP_ASYNC_PF 59
+#define KVM_CAP_TSC_CONTROL 60
+#define KVM_CAP_GET_TSC_KHZ 61
+#define KVM_CAP_PPC_BOOKE_SREGS 62
+#define KVM_CAP_SPAPR_TCE 63
+#define KVM_CAP_PPC_SMT 64
+#define KVM_CAP_PPC_RMA	65
+#define KVM_CAP_MAX_VCPUS 66       /* returns max vcpus per vm */
+#define KVM_CAP_PPC_HIOR 67
+#define KVM_CAP_PPC_PAPR 68
+#define KVM_CAP_SW_TLB 69
+#define KVM_CAP_ONE_REG 70
+#define KVM_CAP_S390_GMAP 71
+#define KVM_CAP_TSC_DEADLINE_TIMER 72
+#define KVM_CAP_S390_UCONTROL 73
+#define KVM_CAP_SYNC_REGS 74
+#define KVM_CAP_PCI_2_3 75
+#define KVM_CAP_KVMCLOCK_CTRL 76
+#define KVM_CAP_SIGNAL_MSI 77
+#define KVM_CAP_PPC_GET_SMMU_INFO 78
+#define KVM_CAP_S390_COW 79
+#define KVM_CAP_PPC_ALLOC_HTAB 80
+#define KVM_CAP_READONLY_MEM 81
+#define KVM_CAP_IRQFD_RESAMPLE 82
+#define KVM_CAP_PPC_BOOKE_WATCHDOG 83
+#define KVM_CAP_PPC_HTAB_FD 84
+#define KVM_CAP_S390_CSS_SUPPORT 85
+#define KVM_CAP_PPC_EPR 86
+#define KVM_CAP_ARM_PSCI 87
+#define KVM_CAP_ARM_SET_DEVICE_ADDR 88
+#define KVM_CAP_DEVICE_CTRL 89
+#define KVM_CAP_IRQ_MPIC 90
+#define KVM_CAP_PPC_RTAS 91
+#define KVM_CAP_IRQ_XICS 92
+#define KVM_CAP_ARM_EL1_32BIT 93
+#define KVM_CAP_SPAPR_MULTITCE 94
+#define KVM_CAP_EXT_EMUL_CPUID 95
+#define KVM_CAP_HYPERV_TIME 96
+#define KVM_CAP_IOAPIC_POLARITY_IGNORED 97
+#define KVM_CAP_ENABLE_CAP_VM 98
+#define KVM_CAP_S390_IRQCHIP 99
+#define KVM_CAP_IOEVENTFD_NO_LENGTH 100
+#define KVM_CAP_VM_ATTRIBUTES 101
+#define KVM_CAP_ARM_PSCI_0_2 102
+#define KVM_CAP_PPC_FIXUP_HCALL 103
+#define KVM_CAP_PPC_ENABLE_HCALL 104
+#define KVM_CAP_CHECK_EXTENSION_VM 105
+#define KVM_CAP_S390_USER_SIGP 106
+#define KVM_CAP_S390_VECTOR_REGISTERS 107
+#define KVM_CAP_S390_MEM_OP 108
+#define KVM_CAP_S390_USER_STSI 109
+#define KVM_CAP_S390_SKEYS 110
+#define KVM_CAP_MIPS_FPU 111
+#define KVM_CAP_MIPS_MSA 112
+#define KVM_CAP_S390_INJECT_IRQ 113
+#define KVM_CAP_S390_IRQ_STATE 114
+#define KVM_CAP_PPC_HWRNG 115
+#define KVM_CAP_DISABLE_QUIRKS 116
+#define KVM_CAP_X86_SMM 117
+#define KVM_CAP_MULTI_ADDRESS_SPACE 118
+#define KVM_CAP_GUEST_DEBUG_HW_BPS 119
+#define KVM_CAP_GUEST_DEBUG_HW_WPS 120
+#define KVM_CAP_SPLIT_IRQCHIP 121
+#define KVM_CAP_IOEVENTFD_ANY_LENGTH 122
+#define KVM_CAP_HYPERV_SYNIC 123
+#define KVM_CAP_S390_RI 124
+#define KVM_CAP_SPAPR_TCE_64 125
+#define KVM_CAP_ARM_PMU_V3 126
+#define KVM_CAP_VCPU_ATTRIBUTES 127
+#define KVM_CAP_MAX_VCPU_ID 128
+#define KVM_CAP_X2APIC_API 129
+#define KVM_CAP_S390_USER_INSTR0 130
+#define KVM_CAP_MSI_DEVID 131
+#define KVM_CAP_PPC_HTM 132
+#define KVM_CAP_SPAPR_RESIZE_HPT 133
+#define KVM_CAP_PPC_MMU_RADIX 134
+#define KVM_CAP_PPC_MMU_HASH_V3 135
+#define KVM_CAP_IMMEDIATE_EXIT 136
+#define KVM_CAP_MIPS_VZ 137
+#define KVM_CAP_MIPS_TE 138
+#define KVM_CAP_MIPS_64BIT 139
+#define KVM_CAP_S390_GS 140
+#define KVM_CAP_S390_AIS 141
+#define KVM_CAP_SPAPR_TCE_VFIO 142
+#define KVM_CAP_X86_DISABLE_EXITS 143
+#define KVM_CAP_ARM_USER_IRQ 144
+#define KVM_CAP_S390_CMMA_MIGRATION 145
+#define KVM_CAP_PPC_FWNMI 146
+#define KVM_CAP_PPC_SMT_POSSIBLE 147
+#define KVM_CAP_HYPERV_SYNIC2 148
+#define KVM_CAP_HYPERV_VP_INDEX 149
+#define KVM_CAP_S390_AIS_MIGRATION 150
+#define KVM_CAP_PPC_GET_CPU_CHAR 151
+#define KVM_CAP_S390_BPB 152
+#define KVM_CAP_GET_MSR_FEATURES 153
+#define KVM_CAP_HYPERV_EVENTFD 154
+#define KVM_CAP_HYPERV_TLBFLUSH 155
+#define KVM_CAP_S390_HPAGE_1M 156
+#define KVM_CAP_NESTED_STATE 157
+#define KVM_CAP_ARM_INJECT_SERROR_ESR 158
+#define KVM_CAP_MSR_PLATFORM_INFO 159
+
+#ifdef KVM_CAP_IRQ_ROUTING
+
+struct kvm_irq_routing_irqchip {
+	__u32 irqchip;
+	__u32 pin;
+};
+
+struct kvm_irq_routing_msi {
+	__u32 address_lo;
+	__u32 address_hi;
+	__u32 data;
+	union {
+		__u32 pad;
+		__u32 devid;
+	};
+};
+
+struct kvm_irq_routing_s390_adapter {
+	__u64 ind_addr;
+	__u64 summary_addr;
+	__u64 ind_offset;
+	__u32 summary_offset;
+	__u32 adapter_id;
+};
+
+struct kvm_irq_routing_hv_sint {
+	__u32 vcpu;
+	__u32 sint;
+};
+
+/* gsi routing entry types */
+#define KVM_IRQ_ROUTING_IRQCHIP 1
+#define KVM_IRQ_ROUTING_MSI 2
+#define KVM_IRQ_ROUTING_S390_ADAPTER 3
+#define KVM_IRQ_ROUTING_HV_SINT 4
+
+struct kvm_irq_routing_entry {
+	__u32 gsi;
+	__u32 type;
+	__u32 flags;
+	__u32 pad;
+	union {
+		struct kvm_irq_routing_irqchip irqchip;
+		struct kvm_irq_routing_msi msi;
+		struct kvm_irq_routing_s390_adapter adapter;
+		struct kvm_irq_routing_hv_sint hv_sint;
+		__u32 pad[8];
+	} u;
+};
+
+struct kvm_irq_routing {
+	__u32 nr;
+	__u32 flags;
+	struct kvm_irq_routing_entry entries[0];
+};
+
+#endif
+
+#ifdef KVM_CAP_MCE
+/* x86 MCE */
+struct kvm_x86_mce {
+	__u64 status;
+	__u64 addr;
+	__u64 misc;
+	__u64 mcg_status;
+	__u8 bank;
+	__u8 pad1[7];
+	__u64 pad2[3];
+};
+#endif
+
+#ifdef KVM_CAP_XEN_HVM
+struct kvm_xen_hvm_config {
+	__u32 flags;
+	__u32 msr;
+	__u64 blob_addr_32;
+	__u64 blob_addr_64;
+	__u8 blob_size_32;
+	__u8 blob_size_64;
+	__u8 pad2[30];
+};
+#endif
+
+#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
+/*
+ * Available with KVM_CAP_IRQFD_RESAMPLE
+ *
+ * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
+ * the irqfd to operate in resampling mode for level triggered interrupt
+ * emulation.  See Documentation/virtual/kvm/api.txt.
+ */
+#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
+
+struct kvm_irqfd {
+	__u32 fd;
+	__u32 gsi;
+	__u32 flags;
+	__u32 resamplefd;
+	__u8  pad[16];
+};
+
+/* For KVM_CAP_ADJUST_CLOCK */
+
+/* Do not use 1, KVM_CHECK_EXTENSION returned it before we had flags.  */
+#define KVM_CLOCK_TSC_STABLE		2
+
+struct kvm_clock_data {
+	__u64 clock;
+	__u32 flags;
+	__u32 pad[9];
+};
+
+/* For KVM_CAP_SW_TLB */
+
+#define KVM_MMU_FSL_BOOKE_NOHV		0
+#define KVM_MMU_FSL_BOOKE_HV		1
+
+struct kvm_config_tlb {
+	__u64 params;
+	__u64 array;
+	__u32 mmu_type;
+	__u32 array_len;
+};
+
+struct kvm_dirty_tlb {
+	__u64 bitmap;
+	__u32 num_dirty;
+};
+
+/* Available with KVM_CAP_ONE_REG */
+
+#define KVM_REG_ARCH_MASK	0xff00000000000000ULL
+#define KVM_REG_GENERIC		0x0000000000000000ULL
+
+/*
+ * Architecture specific registers are to be defined in arch headers and
+ * ORed with the arch identifier.
+ */
+#define KVM_REG_PPC		0x1000000000000000ULL
+#define KVM_REG_X86		0x2000000000000000ULL
+#define KVM_REG_IA64		0x3000000000000000ULL
+#define KVM_REG_ARM		0x4000000000000000ULL
+#define KVM_REG_S390		0x5000000000000000ULL
+#define KVM_REG_ARM64		0x6000000000000000ULL
+#define KVM_REG_MIPS		0x7000000000000000ULL
+
+#define KVM_REG_SIZE_SHIFT	52
+#define KVM_REG_SIZE_MASK	0x00f0000000000000ULL
+#define KVM_REG_SIZE_U8		0x0000000000000000ULL
+#define KVM_REG_SIZE_U16	0x0010000000000000ULL
+#define KVM_REG_SIZE_U32	0x0020000000000000ULL
+#define KVM_REG_SIZE_U64	0x0030000000000000ULL
+#define KVM_REG_SIZE_U128	0x0040000000000000ULL
+#define KVM_REG_SIZE_U256	0x0050000000000000ULL
+#define KVM_REG_SIZE_U512	0x0060000000000000ULL
+#define KVM_REG_SIZE_U1024	0x0070000000000000ULL
+
+struct kvm_reg_list {
+	__u64 n; /* number of regs */
+	__u64 reg[0];
+};
+
+struct kvm_one_reg {
+	__u64 id;
+	__u64 addr;
+};
+
+#define KVM_MSI_VALID_DEVID	(1U << 0)
+struct kvm_msi {
+	__u32 address_lo;
+	__u32 address_hi;
+	__u32 data;
+	__u32 flags;
+	__u32 devid;
+	__u8  pad[12];
+};
+
+struct kvm_arm_device_addr {
+	__u64 id;
+	__u64 addr;
+};
+
+/*
+ * Device control API, available with KVM_CAP_DEVICE_CTRL
+ */
+#define KVM_CREATE_DEVICE_TEST		1
+
+struct kvm_create_device {
+	__u32	type;	/* in: KVM_DEV_TYPE_xxx */
+	__u32	fd;	/* out: device handle */
+	__u32	flags;	/* in: KVM_CREATE_DEVICE_xxx */
+};
+
+struct kvm_device_attr {
+	__u32	flags;		/* no flags currently defined */
+	__u32	group;		/* device-defined */
+	__u64	attr;		/* group-defined */
+	__u64	addr;		/* userspace address of attr data */
+};
+
+#define  KVM_DEV_VFIO_GROUP			1
+#define   KVM_DEV_VFIO_GROUP_ADD			1
+#define   KVM_DEV_VFIO_GROUP_DEL			2
+#define   KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE		3
+
+enum kvm_device_type {
+	KVM_DEV_TYPE_FSL_MPIC_20	= 1,
+#define KVM_DEV_TYPE_FSL_MPIC_20	KVM_DEV_TYPE_FSL_MPIC_20
+	KVM_DEV_TYPE_FSL_MPIC_42,
+#define KVM_DEV_TYPE_FSL_MPIC_42	KVM_DEV_TYPE_FSL_MPIC_42
+	KVM_DEV_TYPE_XICS,
+#define KVM_DEV_TYPE_XICS		KVM_DEV_TYPE_XICS
+	KVM_DEV_TYPE_VFIO,
+#define KVM_DEV_TYPE_VFIO		KVM_DEV_TYPE_VFIO
+	KVM_DEV_TYPE_ARM_VGIC_V2,
+#define KVM_DEV_TYPE_ARM_VGIC_V2	KVM_DEV_TYPE_ARM_VGIC_V2
+	KVM_DEV_TYPE_FLIC,
+#define KVM_DEV_TYPE_FLIC		KVM_DEV_TYPE_FLIC
+	KVM_DEV_TYPE_ARM_VGIC_V3,
+#define KVM_DEV_TYPE_ARM_VGIC_V3	KVM_DEV_TYPE_ARM_VGIC_V3
+	KVM_DEV_TYPE_ARM_VGIC_ITS,
+#define KVM_DEV_TYPE_ARM_VGIC_ITS	KVM_DEV_TYPE_ARM_VGIC_ITS
+	KVM_DEV_TYPE_MAX,
+};
+
+struct kvm_vfio_spapr_tce {
+	__s32	groupfd;
+	__s32	tablefd;
+};
+
+/*
+ * ioctls for VM fds
+ */
+#define KVM_SET_MEMORY_REGION     _IOW(KVMIO,  0x40, struct kvm_memory_region)
+/*
+ * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
+ * a vcpu fd.
+ */
+#define KVM_CREATE_VCPU           _IO(KVMIO,   0x41)
+#define KVM_GET_DIRTY_LOG         _IOW(KVMIO,  0x42, struct kvm_dirty_log)
+/* KVM_SET_MEMORY_ALIAS is obsolete: */
+#define KVM_SET_MEMORY_ALIAS      _IOW(KVMIO,  0x43, struct kvm_memory_alias)
+#define KVM_SET_NR_MMU_PAGES      _IO(KVMIO,   0x44)
+#define KVM_GET_NR_MMU_PAGES      _IO(KVMIO,   0x45)
+#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
+					struct kvm_userspace_memory_region)
+#define KVM_SET_TSS_ADDR          _IO(KVMIO,   0x47)
+#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO,  0x48, __u64)
+
+/* enable ucontrol for s390 */
+struct kvm_s390_ucas_mapping {
+	__u64 user_addr;
+	__u64 vcpu_addr;
+	__u64 length;
+};
+#define KVM_S390_UCAS_MAP        _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping)
+#define KVM_S390_UCAS_UNMAP      _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping)
+#define KVM_S390_VCPU_FAULT	 _IOW(KVMIO, 0x52, unsigned long)
+
+/* Device model IOC */
+#define KVM_CREATE_IRQCHIP        _IO(KVMIO,   0x60)
+#define KVM_IRQ_LINE              _IOW(KVMIO,  0x61, struct kvm_irq_level)
+#define KVM_GET_IRQCHIP           _IOWR(KVMIO, 0x62, struct kvm_irqchip)
+#define KVM_SET_IRQCHIP           _IOR(KVMIO,  0x63, struct kvm_irqchip)
+#define KVM_CREATE_PIT            _IO(KVMIO,   0x64)
+#define KVM_GET_PIT               _IOWR(KVMIO, 0x65, struct kvm_pit_state)
+#define KVM_SET_PIT               _IOR(KVMIO,  0x66, struct kvm_pit_state)
+#define KVM_IRQ_LINE_STATUS       _IOWR(KVMIO, 0x67, struct kvm_irq_level)
+#define KVM_REGISTER_COALESCED_MMIO \
+			_IOW(KVMIO,  0x67, struct kvm_coalesced_mmio_zone)
+#define KVM_UNREGISTER_COALESCED_MMIO \
+			_IOW(KVMIO,  0x68, struct kvm_coalesced_mmio_zone)
+#define KVM_ASSIGN_PCI_DEVICE     _IOR(KVMIO,  0x69, \
+				       struct kvm_assigned_pci_dev)
+#define KVM_SET_GSI_ROUTING       _IOW(KVMIO,  0x6a, struct kvm_irq_routing)
+/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
+#define KVM_ASSIGN_IRQ            __KVM_DEPRECATED_VM_R_0x70
+#define KVM_ASSIGN_DEV_IRQ        _IOW(KVMIO,  0x70, struct kvm_assigned_irq)
+#define KVM_REINJECT_CONTROL      _IO(KVMIO,   0x71)
+#define KVM_DEASSIGN_PCI_DEVICE   _IOW(KVMIO,  0x72, \
+				       struct kvm_assigned_pci_dev)
+#define KVM_ASSIGN_SET_MSIX_NR    _IOW(KVMIO,  0x73, \
+				       struct kvm_assigned_msix_nr)
+#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO,  0x74, \
+				       struct kvm_assigned_msix_entry)
+#define KVM_DEASSIGN_DEV_IRQ      _IOW(KVMIO,  0x75, struct kvm_assigned_irq)
+#define KVM_IRQFD                 _IOW(KVMIO,  0x76, struct kvm_irqfd)
+#define KVM_CREATE_PIT2		  _IOW(KVMIO,  0x77, struct kvm_pit_config)
+#define KVM_SET_BOOT_CPU_ID       _IO(KVMIO,   0x78)
+#define KVM_IOEVENTFD             _IOW(KVMIO,  0x79, struct kvm_ioeventfd)
+#define KVM_XEN_HVM_CONFIG        _IOW(KVMIO,  0x7a, struct kvm_xen_hvm_config)
+#define KVM_SET_CLOCK             _IOW(KVMIO,  0x7b, struct kvm_clock_data)
+#define KVM_GET_CLOCK             _IOR(KVMIO,  0x7c, struct kvm_clock_data)
+/* Available with KVM_CAP_PIT_STATE2 */
+#define KVM_GET_PIT2              _IOR(KVMIO,  0x9f, struct kvm_pit_state2)
+#define KVM_SET_PIT2              _IOW(KVMIO,  0xa0, struct kvm_pit_state2)
+/* Available with KVM_CAP_PPC_GET_PVINFO */
+#define KVM_PPC_GET_PVINFO	  _IOW(KVMIO,  0xa1, struct kvm_ppc_pvinfo)
+/* Available with KVM_CAP_TSC_CONTROL */
+#define KVM_SET_TSC_KHZ           _IO(KVMIO,  0xa2)
+#define KVM_GET_TSC_KHZ           _IO(KVMIO,  0xa3)
+/* Available with KVM_CAP_PCI_2_3 */
+#define KVM_ASSIGN_SET_INTX_MASK  _IOW(KVMIO,  0xa4, \
+				       struct kvm_assigned_pci_dev)
+/* Available with KVM_CAP_SIGNAL_MSI */
+#define KVM_SIGNAL_MSI            _IOW(KVMIO,  0xa5, struct kvm_msi)
+/* Available with KVM_CAP_PPC_GET_SMMU_INFO */
+#define KVM_PPC_GET_SMMU_INFO	  _IOR(KVMIO,  0xa6, struct kvm_ppc_smmu_info)
+/* Available with KVM_CAP_PPC_ALLOC_HTAB */
+#define KVM_PPC_ALLOCATE_HTAB	  _IOWR(KVMIO, 0xa7, __u32)
+#define KVM_CREATE_SPAPR_TCE	  _IOW(KVMIO,  0xa8, struct kvm_create_spapr_tce)
+#define KVM_CREATE_SPAPR_TCE_64	  _IOW(KVMIO,  0xa8, \
+				       struct kvm_create_spapr_tce_64)
+/* Available with KVM_CAP_RMA */
+#define KVM_ALLOCATE_RMA	  _IOR(KVMIO,  0xa9, struct kvm_allocate_rma)
+/* Available with KVM_CAP_PPC_HTAB_FD */
+#define KVM_PPC_GET_HTAB_FD	  _IOW(KVMIO,  0xaa, struct kvm_get_htab_fd)
+/* Available with KVM_CAP_ARM_SET_DEVICE_ADDR */
+#define KVM_ARM_SET_DEVICE_ADDR	  _IOW(KVMIO,  0xab, struct kvm_arm_device_addr)
+/* Available with KVM_CAP_PPC_RTAS */
+#define KVM_PPC_RTAS_DEFINE_TOKEN _IOW(KVMIO,  0xac, struct kvm_rtas_token_args)
+/* Available with KVM_CAP_SPAPR_RESIZE_HPT */
+#define KVM_PPC_RESIZE_HPT_PREPARE _IOR(KVMIO, 0xad, struct kvm_ppc_resize_hpt)
+#define KVM_PPC_RESIZE_HPT_COMMIT  _IOR(KVMIO, 0xae, struct kvm_ppc_resize_hpt)
+/* Available with KVM_CAP_PPC_RADIX_MMU or KVM_CAP_PPC_HASH_MMU_V3 */
+#define KVM_PPC_CONFIGURE_V3_MMU  _IOW(KVMIO,  0xaf, struct kvm_ppc_mmuv3_cfg)
+/* Available with KVM_CAP_PPC_RADIX_MMU */
+#define KVM_PPC_GET_RMMU_INFO	  _IOW(KVMIO,  0xb0, struct kvm_ppc_rmmu_info)
+/* Available with KVM_CAP_PPC_GET_CPU_CHAR */
+#define KVM_PPC_GET_CPU_CHAR	  _IOR(KVMIO,  0xb1, struct kvm_ppc_cpu_char)
+
+/* ioctl for vm fd */
+#define KVM_CREATE_DEVICE	  _IOWR(KVMIO,  0xe0, struct kvm_create_device)
+
+/* ioctls for fds returned by KVM_CREATE_DEVICE */
+#define KVM_SET_DEVICE_ATTR	  _IOW(KVMIO,  0xe1, struct kvm_device_attr)
+#define KVM_GET_DEVICE_ATTR	  _IOW(KVMIO,  0xe2, struct kvm_device_attr)
+#define KVM_HAS_DEVICE_ATTR	  _IOW(KVMIO,  0xe3, struct kvm_device_attr)
+
+/*
+ * ioctls for vcpu fds
+ */
+#define KVM_RUN                   _IO(KVMIO,   0x80)
+#define KVM_GET_REGS              _IOR(KVMIO,  0x81, struct kvm_regs)
+#define KVM_SET_REGS              _IOW(KVMIO,  0x82, struct kvm_regs)
+#define KVM_GET_SREGS             _IOR(KVMIO,  0x83, struct kvm_sregs)
+#define KVM_SET_SREGS             _IOW(KVMIO,  0x84, struct kvm_sregs)
+#define KVM_TRANSLATE             _IOWR(KVMIO, 0x85, struct kvm_translation)
+#define KVM_INTERRUPT             _IOW(KVMIO,  0x86, struct kvm_interrupt)
+/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
+#define KVM_DEBUG_GUEST           __KVM_DEPRECATED_VCPU_W_0x87
+#define KVM_GET_MSRS              _IOWR(KVMIO, 0x88, struct kvm_msrs)
+#define KVM_SET_MSRS              _IOW(KVMIO,  0x89, struct kvm_msrs)
+#define KVM_SET_CPUID             _IOW(KVMIO,  0x8a, struct kvm_cpuid)
+#define KVM_SET_SIGNAL_MASK       _IOW(KVMIO,  0x8b, struct kvm_signal_mask)
+#define KVM_GET_FPU               _IOR(KVMIO,  0x8c, struct kvm_fpu)
+#define KVM_SET_FPU               _IOW(KVMIO,  0x8d, struct kvm_fpu)
+#define KVM_GET_LAPIC             _IOR(KVMIO,  0x8e, struct kvm_lapic_state)
+#define KVM_SET_LAPIC             _IOW(KVMIO,  0x8f, struct kvm_lapic_state)
+#define KVM_SET_CPUID2            _IOW(KVMIO,  0x90, struct kvm_cpuid2)
+#define KVM_GET_CPUID2            _IOWR(KVMIO, 0x91, struct kvm_cpuid2)
+/* Available with KVM_CAP_VAPIC */
+#define KVM_TPR_ACCESS_REPORTING  _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl)
+/* Available with KVM_CAP_VAPIC */
+#define KVM_SET_VAPIC_ADDR        _IOW(KVMIO,  0x93, struct kvm_vapic_addr)
+/* valid for virtual machine (for floating interrupt)_and_ vcpu */
+#define KVM_S390_INTERRUPT        _IOW(KVMIO,  0x94, struct kvm_s390_interrupt)
+/* store status for s390 */
+#define KVM_S390_STORE_STATUS_NOADDR    (-1ul)
+#define KVM_S390_STORE_STATUS_PREFIXED  (-2ul)
+#define KVM_S390_STORE_STATUS	  _IOW(KVMIO,  0x95, unsigned long)
+/* initial ipl psw for s390 */
+#define KVM_S390_SET_INITIAL_PSW  _IOW(KVMIO,  0x96, struct kvm_s390_psw)
+/* initial reset for s390 */
+#define KVM_S390_INITIAL_RESET    _IO(KVMIO,   0x97)
+#define KVM_GET_MP_STATE          _IOR(KVMIO,  0x98, struct kvm_mp_state)
+#define KVM_SET_MP_STATE          _IOW(KVMIO,  0x99, struct kvm_mp_state)
+/* Available with KVM_CAP_USER_NMI */
+#define KVM_NMI                   _IO(KVMIO,   0x9a)
+/* Available with KVM_CAP_SET_GUEST_DEBUG */
+#define KVM_SET_GUEST_DEBUG       _IOW(KVMIO,  0x9b, struct kvm_guest_debug)
+/* MCE for x86 */
+#define KVM_X86_SETUP_MCE         _IOW(KVMIO,  0x9c, __u64)
+#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO,  0x9d, __u64)
+#define KVM_X86_SET_MCE           _IOW(KVMIO,  0x9e, struct kvm_x86_mce)
+/* Available with KVM_CAP_VCPU_EVENTS */
+#define KVM_GET_VCPU_EVENTS       _IOR(KVMIO,  0x9f, struct kvm_vcpu_events)
+#define KVM_SET_VCPU_EVENTS       _IOW(KVMIO,  0xa0, struct kvm_vcpu_events)
+/* Available with KVM_CAP_DEBUGREGS */
+#define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
+#define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
+/*
+ * vcpu version available with KVM_ENABLE_CAP
+ * vm version available with KVM_CAP_ENABLE_CAP_VM
+ */
+#define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
+/* Available with KVM_CAP_XSAVE */
+#define KVM_GET_XSAVE		  _IOR(KVMIO,  0xa4, struct kvm_xsave)
+#define KVM_SET_XSAVE		  _IOW(KVMIO,  0xa5, struct kvm_xsave)
+/* Available with KVM_CAP_XCRS */
+#define KVM_GET_XCRS		  _IOR(KVMIO,  0xa6, struct kvm_xcrs)
+#define KVM_SET_XCRS		  _IOW(KVMIO,  0xa7, struct kvm_xcrs)
+/* Available with KVM_CAP_SW_TLB */
+#define KVM_DIRTY_TLB		  _IOW(KVMIO,  0xaa, struct kvm_dirty_tlb)
+/* Available with KVM_CAP_ONE_REG */
+#define KVM_GET_ONE_REG		  _IOW(KVMIO,  0xab, struct kvm_one_reg)
+#define KVM_SET_ONE_REG		  _IOW(KVMIO,  0xac, struct kvm_one_reg)
+/* VM is being stopped by host */
+#define KVM_KVMCLOCK_CTRL	  _IO(KVMIO,   0xad)
+#define KVM_ARM_VCPU_INIT	  _IOW(KVMIO,  0xae, struct kvm_vcpu_init)
+#define KVM_ARM_PREFERRED_TARGET  _IOR(KVMIO,  0xaf, struct kvm_vcpu_init)
+#define KVM_GET_REG_LIST	  _IOWR(KVMIO, 0xb0, struct kvm_reg_list)
+/* Available with KVM_CAP_S390_MEM_OP */
+#define KVM_S390_MEM_OP		  _IOW(KVMIO,  0xb1, struct kvm_s390_mem_op)
+/* Available with KVM_CAP_S390_SKEYS */
+#define KVM_S390_GET_SKEYS      _IOW(KVMIO, 0xb2, struct kvm_s390_skeys)
+#define KVM_S390_SET_SKEYS      _IOW(KVMIO, 0xb3, struct kvm_s390_skeys)
+/* Available with KVM_CAP_S390_INJECT_IRQ */
+#define KVM_S390_IRQ              _IOW(KVMIO,  0xb4, struct kvm_s390_irq)
+/* Available with KVM_CAP_S390_IRQ_STATE */
+#define KVM_S390_SET_IRQ_STATE	  _IOW(KVMIO, 0xb5, struct kvm_s390_irq_state)
+#define KVM_S390_GET_IRQ_STATE	  _IOW(KVMIO, 0xb6, struct kvm_s390_irq_state)
+/* Available with KVM_CAP_X86_SMM */
+#define KVM_SMI                   _IO(KVMIO,   0xb7)
+/* Available with KVM_CAP_S390_CMMA_MIGRATION */
+#define KVM_S390_GET_CMMA_BITS      _IOWR(KVMIO, 0xb8, struct kvm_s390_cmma_log)
+#define KVM_S390_SET_CMMA_BITS      _IOW(KVMIO, 0xb9, struct kvm_s390_cmma_log)
+/* Memory Encryption Commands */
+#define KVM_MEMORY_ENCRYPT_OP      _IOWR(KVMIO, 0xba, unsigned long)
+
+struct kvm_enc_region {
+	__u64 addr;
+	__u64 size;
+};
+
+#define KVM_MEMORY_ENCRYPT_REG_REGION    _IOR(KVMIO, 0xbb, struct kvm_enc_region)
+#define KVM_MEMORY_ENCRYPT_UNREG_REGION  _IOR(KVMIO, 0xbc, struct kvm_enc_region)
+
+/* Available with KVM_CAP_HYPERV_EVENTFD */
+#define KVM_HYPERV_EVENTFD        _IOW(KVMIO,  0xbd, struct kvm_hyperv_eventfd)
+
+/* Available with KVM_CAP_NESTED_STATE */
+#define KVM_GET_NESTED_STATE         _IOWR(KVMIO, 0xbe, struct kvm_nested_state)
+#define KVM_SET_NESTED_STATE         _IOW(KVMIO,  0xbf, struct kvm_nested_state)
+
+/* Secure Encrypted Virtualization command */
+enum sev_cmd_id {
+	/* Guest initialization commands */
+	KVM_SEV_INIT = 0,
+	KVM_SEV_ES_INIT,
+	/* Guest launch commands */
+	KVM_SEV_LAUNCH_START,
+	KVM_SEV_LAUNCH_UPDATE_DATA,
+	KVM_SEV_LAUNCH_UPDATE_VMSA,
+	KVM_SEV_LAUNCH_SECRET,
+	KVM_SEV_LAUNCH_MEASURE,
+	KVM_SEV_LAUNCH_FINISH,
+	/* Guest migration commands (outgoing) */
+	KVM_SEV_SEND_START,
+	KVM_SEV_SEND_UPDATE_DATA,
+	KVM_SEV_SEND_UPDATE_VMSA,
+	KVM_SEV_SEND_FINISH,
+	/* Guest migration commands (incoming) */
+	KVM_SEV_RECEIVE_START,
+	KVM_SEV_RECEIVE_UPDATE_DATA,
+	KVM_SEV_RECEIVE_UPDATE_VMSA,
+	KVM_SEV_RECEIVE_FINISH,
+	/* Guest status and debug commands */
+	KVM_SEV_GUEST_STATUS,
+	KVM_SEV_DBG_DECRYPT,
+	KVM_SEV_DBG_ENCRYPT,
+	/* Guest certificates commands */
+	KVM_SEV_CERT_EXPORT,
+
+	KVM_SEV_NR_MAX,
+};
+
+struct kvm_sev_cmd {
+	__u32 id;
+	__u64 data;
+	__u32 error;
+	__u32 sev_fd;
+};
+
+struct kvm_sev_launch_start {
+	__u32 handle;
+	__u32 policy;
+	__u64 dh_uaddr;
+	__u32 dh_len;
+	__u64 session_uaddr;
+	__u32 session_len;
+};
+
+struct kvm_sev_launch_update_data {
+	__u64 uaddr;
+	__u32 len;
+};
+
+
+struct kvm_sev_launch_secret {
+	__u64 hdr_uaddr;
+	__u32 hdr_len;
+	__u64 guest_uaddr;
+	__u32 guest_len;
+	__u64 trans_uaddr;
+	__u32 trans_len;
+};
+
+struct kvm_sev_launch_measure {
+	__u64 uaddr;
+	__u32 len;
+};
+
+struct kvm_sev_guest_status {
+	__u32 handle;
+	__u32 policy;
+	__u32 state;
+};
+
+struct kvm_sev_dbg {
+	__u64 src_uaddr;
+	__u64 dst_uaddr;
+	__u32 len;
+};
+
+#define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
+#define KVM_DEV_ASSIGN_PCI_2_3		(1 << 1)
+#define KVM_DEV_ASSIGN_MASK_INTX	(1 << 2)
+
+struct kvm_assigned_pci_dev {
+	__u32 assigned_dev_id;
+	__u32 busnr;
+	__u32 devfn;
+	__u32 flags;
+	__u32 segnr;
+	union {
+		__u32 reserved[11];
+	};
+};
+
+#define KVM_DEV_IRQ_HOST_INTX    (1 << 0)
+#define KVM_DEV_IRQ_HOST_MSI     (1 << 1)
+#define KVM_DEV_IRQ_HOST_MSIX    (1 << 2)
+
+#define KVM_DEV_IRQ_GUEST_INTX   (1 << 8)
+#define KVM_DEV_IRQ_GUEST_MSI    (1 << 9)
+#define KVM_DEV_IRQ_GUEST_MSIX   (1 << 10)
+
+#define KVM_DEV_IRQ_HOST_MASK	 0x00ff
+#define KVM_DEV_IRQ_GUEST_MASK   0xff00
+
+struct kvm_assigned_irq {
+	__u32 assigned_dev_id;
+	__u32 host_irq; /* ignored (legacy field) */
+	__u32 guest_irq;
+	__u32 flags;
+	union {
+		__u32 reserved[12];
+	};
+};
+
+struct kvm_assigned_msix_nr {
+	__u32 assigned_dev_id;
+	__u16 entry_nr;
+	__u16 padding;
+};
+
+#define KVM_MAX_MSIX_PER_DEV		256
+struct kvm_assigned_msix_entry {
+	__u32 assigned_dev_id;
+	__u32 gsi;
+	__u16 entry; /* The index of entry in the MSI-X table */
+	__u16 padding[3];
+};
+
+#define KVM_X2APIC_API_USE_32BIT_IDS            (1ULL << 0)
+#define KVM_X2APIC_API_DISABLE_BROADCAST_QUIRK  (1ULL << 1)
+
+/* Available with KVM_CAP_ARM_USER_IRQ */
+
+/* Bits for run->s.regs.device_irq_level */
+#define KVM_ARM_DEV_EL1_VTIMER		(1 << 0)
+#define KVM_ARM_DEV_EL1_PTIMER		(1 << 1)
+#define KVM_ARM_DEV_PMU			(1 << 2)
+
+struct kvm_hyperv_eventfd {
+	__u32 conn_id;
+	__s32 fd;
+	__u32 flags;
+	__u32 padding[3];
+};
+
+#define KVM_HYPERV_CONN_ID_MASK		0x00ffffff
+#define KVM_HYPERV_EVENTFD_DEASSIGN	(1 << 0)
+
+#endif /* __LINUX_KVM_H */
diff --git a/tools/include/uapi/linux/lirc.h b/tools/include/uapi/linux/lirc.h
new file mode 100644
index 000000000..f18993104
--- /dev/null
+++ b/tools/include/uapi/linux/lirc.h
@@ -0,0 +1,217 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * lirc.h - linux infrared remote control header file
+ * last modified 2010/07/13 by Jarod Wilson
+ */
+
+#ifndef _LINUX_LIRC_H
+#define _LINUX_LIRC_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define PULSE_BIT       0x01000000
+#define PULSE_MASK      0x00FFFFFF
+
+#define LIRC_MODE2_SPACE     0x00000000
+#define LIRC_MODE2_PULSE     0x01000000
+#define LIRC_MODE2_FREQUENCY 0x02000000
+#define LIRC_MODE2_TIMEOUT   0x03000000
+
+#define LIRC_VALUE_MASK      0x00FFFFFF
+#define LIRC_MODE2_MASK      0xFF000000
+
+#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
+#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
+#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
+#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
+
+#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
+#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
+
+#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
+#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
+#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
+#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
+
+/* used heavily by lirc userspace */
+#define lirc_t int
+
+/*** lirc compatible hardware features ***/
+
+#define LIRC_MODE2SEND(x) (x)
+#define LIRC_SEND2MODE(x) (x)
+#define LIRC_MODE2REC(x) ((x) << 16)
+#define LIRC_REC2MODE(x) ((x) >> 16)
+
+#define LIRC_MODE_RAW                  0x00000001
+#define LIRC_MODE_PULSE                0x00000002
+#define LIRC_MODE_MODE2                0x00000004
+#define LIRC_MODE_SCANCODE             0x00000008
+#define LIRC_MODE_LIRCCODE             0x00000010
+
+
+#define LIRC_CAN_SEND_RAW              LIRC_MODE2SEND(LIRC_MODE_RAW)
+#define LIRC_CAN_SEND_PULSE            LIRC_MODE2SEND(LIRC_MODE_PULSE)
+#define LIRC_CAN_SEND_MODE2            LIRC_MODE2SEND(LIRC_MODE_MODE2)
+#define LIRC_CAN_SEND_LIRCCODE         LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
+
+#define LIRC_CAN_SEND_MASK             0x0000003f
+
+#define LIRC_CAN_SET_SEND_CARRIER      0x00000100
+#define LIRC_CAN_SET_SEND_DUTY_CYCLE   0x00000200
+#define LIRC_CAN_SET_TRANSMITTER_MASK  0x00000400
+
+#define LIRC_CAN_REC_RAW               LIRC_MODE2REC(LIRC_MODE_RAW)
+#define LIRC_CAN_REC_PULSE             LIRC_MODE2REC(LIRC_MODE_PULSE)
+#define LIRC_CAN_REC_MODE2             LIRC_MODE2REC(LIRC_MODE_MODE2)
+#define LIRC_CAN_REC_SCANCODE          LIRC_MODE2REC(LIRC_MODE_SCANCODE)
+#define LIRC_CAN_REC_LIRCCODE          LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
+
+#define LIRC_CAN_REC_MASK              LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
+
+#define LIRC_CAN_SET_REC_CARRIER       (LIRC_CAN_SET_SEND_CARRIER << 16)
+#define LIRC_CAN_SET_REC_DUTY_CYCLE    (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
+
+#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
+#define LIRC_CAN_SET_REC_CARRIER_RANGE    0x80000000
+#define LIRC_CAN_GET_REC_RESOLUTION       0x20000000
+#define LIRC_CAN_SET_REC_TIMEOUT          0x10000000
+#define LIRC_CAN_SET_REC_FILTER           0x08000000
+
+#define LIRC_CAN_MEASURE_CARRIER          0x02000000
+#define LIRC_CAN_USE_WIDEBAND_RECEIVER    0x04000000
+
+#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
+#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
+
+#define LIRC_CAN_NOTIFY_DECODE            0x01000000
+
+/*** IOCTL commands for lirc driver ***/
+
+#define LIRC_GET_FEATURES              _IOR('i', 0x00000000, __u32)
+
+#define LIRC_GET_SEND_MODE             _IOR('i', 0x00000001, __u32)
+#define LIRC_GET_REC_MODE              _IOR('i', 0x00000002, __u32)
+#define LIRC_GET_REC_RESOLUTION        _IOR('i', 0x00000007, __u32)
+
+#define LIRC_GET_MIN_TIMEOUT           _IOR('i', 0x00000008, __u32)
+#define LIRC_GET_MAX_TIMEOUT           _IOR('i', 0x00000009, __u32)
+
+/* code length in bits, currently only for LIRC_MODE_LIRCCODE */
+#define LIRC_GET_LENGTH                _IOR('i', 0x0000000f, __u32)
+
+#define LIRC_SET_SEND_MODE             _IOW('i', 0x00000011, __u32)
+#define LIRC_SET_REC_MODE              _IOW('i', 0x00000012, __u32)
+/* Note: these can reset the according pulse_width */
+#define LIRC_SET_SEND_CARRIER          _IOW('i', 0x00000013, __u32)
+#define LIRC_SET_REC_CARRIER           _IOW('i', 0x00000014, __u32)
+#define LIRC_SET_SEND_DUTY_CYCLE       _IOW('i', 0x00000015, __u32)
+#define LIRC_SET_TRANSMITTER_MASK      _IOW('i', 0x00000017, __u32)
+
+/*
+ * when a timeout != 0 is set the driver will send a
+ * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
+ * never sent, timeout is disabled by default
+ */
+#define LIRC_SET_REC_TIMEOUT           _IOW('i', 0x00000018, __u32)
+
+/* 1 enables, 0 disables timeout reports in MODE2 */
+#define LIRC_SET_REC_TIMEOUT_REPORTS   _IOW('i', 0x00000019, __u32)
+
+/*
+ * if enabled from the next key press on the driver will send
+ * LIRC_MODE2_FREQUENCY packets
+ */
+#define LIRC_SET_MEASURE_CARRIER_MODE	_IOW('i', 0x0000001d, __u32)
+
+/*
+ * to set a range use LIRC_SET_REC_CARRIER_RANGE with the
+ * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound
+ */
+#define LIRC_SET_REC_CARRIER_RANGE     _IOW('i', 0x0000001f, __u32)
+
+#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
+
+/*
+ * struct lirc_scancode - decoded scancode with protocol for use with
+ *	LIRC_MODE_SCANCODE
+ *
+ * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR
+ *	was decoded.
+ * @flags: should be 0 for transmit. When receiving scancodes,
+ *	LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set
+ *	depending on the protocol
+ * @rc_proto: see enum rc_proto
+ * @keycode: the translated keycode. Set to 0 for transmit.
+ * @scancode: the scancode received or to be sent
+ */
+struct lirc_scancode {
+	__u64	timestamp;
+	__u16	flags;
+	__u16	rc_proto;
+	__u32	keycode;
+	__u64	scancode;
+};
+
+/* Set if the toggle bit of rc-5 or rc-6 is enabled */
+#define LIRC_SCANCODE_FLAG_TOGGLE	1
+/* Set if this is a nec or sanyo repeat */
+#define LIRC_SCANCODE_FLAG_REPEAT	2
+
+/**
+ * enum rc_proto - the Remote Controller protocol
+ *
+ * @RC_PROTO_UNKNOWN: Protocol not known
+ * @RC_PROTO_OTHER: Protocol known but proprietary
+ * @RC_PROTO_RC5: Philips RC5 protocol
+ * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
+ * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
+ * @RC_PROTO_JVC: JVC protocol
+ * @RC_PROTO_SONY12: Sony 12 bit protocol
+ * @RC_PROTO_SONY15: Sony 15 bit protocol
+ * @RC_PROTO_SONY20: Sony 20 bit protocol
+ * @RC_PROTO_NEC: NEC protocol
+ * @RC_PROTO_NECX: Extended NEC protocol
+ * @RC_PROTO_NEC32: NEC 32 bit protocol
+ * @RC_PROTO_SANYO: Sanyo protocol
+ * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
+ * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
+ * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
+ * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
+ * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
+ * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
+ * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
+ * @RC_PROTO_SHARP: Sharp protocol
+ * @RC_PROTO_XMP: XMP protocol
+ * @RC_PROTO_CEC: CEC protocol
+ * @RC_PROTO_IMON: iMon Pad protocol
+ */
+enum rc_proto {
+	RC_PROTO_UNKNOWN	= 0,
+	RC_PROTO_OTHER		= 1,
+	RC_PROTO_RC5		= 2,
+	RC_PROTO_RC5X_20	= 3,
+	RC_PROTO_RC5_SZ		= 4,
+	RC_PROTO_JVC		= 5,
+	RC_PROTO_SONY12		= 6,
+	RC_PROTO_SONY15		= 7,
+	RC_PROTO_SONY20		= 8,
+	RC_PROTO_NEC		= 9,
+	RC_PROTO_NECX		= 10,
+	RC_PROTO_NEC32		= 11,
+	RC_PROTO_SANYO		= 12,
+	RC_PROTO_MCIR2_KBD	= 13,
+	RC_PROTO_MCIR2_MSE	= 14,
+	RC_PROTO_RC6_0		= 15,
+	RC_PROTO_RC6_6A_20	= 16,
+	RC_PROTO_RC6_6A_24	= 17,
+	RC_PROTO_RC6_6A_32	= 18,
+	RC_PROTO_RC6_MCE	= 19,
+	RC_PROTO_SHARP		= 20,
+	RC_PROTO_XMP		= 21,
+	RC_PROTO_CEC		= 22,
+	RC_PROTO_IMON		= 23,
+};
+
+#endif
diff --git a/tools/include/uapi/linux/mman.h b/tools/include/uapi/linux/mman.h
new file mode 100644
index 000000000..bfd5938fe
--- /dev/null
+++ b/tools/include/uapi/linux/mman.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_MMAN_H
+#define _UAPI_LINUX_MMAN_H
+
+#include <asm/mman.h>
+#include <asm-generic/hugetlb_encode.h>
+
+#define MREMAP_MAYMOVE	1
+#define MREMAP_FIXED	2
+
+#define OVERCOMMIT_GUESS		0
+#define OVERCOMMIT_ALWAYS		1
+#define OVERCOMMIT_NEVER		2
+
+/*
+ * Huge page size encoding when MAP_HUGETLB is specified, and a huge page
+ * size other than the default is desired.  See hugetlb_encode.h.
+ * All known huge page size encodings are provided here.  It is the
+ * responsibility of the application to know which sizes are supported on
+ * the running system.  See mmap(2) man page for details.
+ */
+#define MAP_HUGE_SHIFT	HUGETLB_FLAG_ENCODE_SHIFT
+#define MAP_HUGE_MASK	HUGETLB_FLAG_ENCODE_MASK
+
+#define MAP_HUGE_64KB	HUGETLB_FLAG_ENCODE_64KB
+#define MAP_HUGE_512KB	HUGETLB_FLAG_ENCODE_512KB
+#define MAP_HUGE_1MB	HUGETLB_FLAG_ENCODE_1MB
+#define MAP_HUGE_2MB	HUGETLB_FLAG_ENCODE_2MB
+#define MAP_HUGE_8MB	HUGETLB_FLAG_ENCODE_8MB
+#define MAP_HUGE_16MB	HUGETLB_FLAG_ENCODE_16MB
+#define MAP_HUGE_256MB	HUGETLB_FLAG_ENCODE_256MB
+#define MAP_HUGE_1GB	HUGETLB_FLAG_ENCODE_1GB
+#define MAP_HUGE_2GB	HUGETLB_FLAG_ENCODE_2GB
+#define MAP_HUGE_16GB	HUGETLB_FLAG_ENCODE_16GB
+
+#endif /* _UAPI_LINUX_MMAN_H */
diff --git a/tools/include/uapi/linux/netlink.h b/tools/include/uapi/linux/netlink.h
new file mode 100644
index 000000000..776bc92e9
--- /dev/null
+++ b/tools/include/uapi/linux/netlink.h
@@ -0,0 +1,251 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__LINUX_NETLINK_H
+#define _UAPI__LINUX_NETLINK_H
+
+#include <linux/kernel.h>
+#include <linux/socket.h> /* for __kernel_sa_family_t */
+#include <linux/types.h>
+
+#define NETLINK_ROUTE		0	/* Routing/device hook				*/
+#define NETLINK_UNUSED		1	/* Unused number				*/
+#define NETLINK_USERSOCK	2	/* Reserved for user mode socket protocols 	*/
+#define NETLINK_FIREWALL	3	/* Unused number, formerly ip_queue		*/
+#define NETLINK_SOCK_DIAG	4	/* socket monitoring				*/
+#define NETLINK_NFLOG		5	/* netfilter/iptables ULOG */
+#define NETLINK_XFRM		6	/* ipsec */
+#define NETLINK_SELINUX		7	/* SELinux event notifications */
+#define NETLINK_ISCSI		8	/* Open-iSCSI */
+#define NETLINK_AUDIT		9	/* auditing */
+#define NETLINK_FIB_LOOKUP	10	
+#define NETLINK_CONNECTOR	11
+#define NETLINK_NETFILTER	12	/* netfilter subsystem */
+#define NETLINK_IP6_FW		13
+#define NETLINK_DNRTMSG		14	/* DECnet routing messages */
+#define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
+#define NETLINK_GENERIC		16
+/* leave room for NETLINK_DM (DM Events) */
+#define NETLINK_SCSITRANSPORT	18	/* SCSI Transports */
+#define NETLINK_ECRYPTFS	19
+#define NETLINK_RDMA		20
+#define NETLINK_CRYPTO		21	/* Crypto layer */
+#define NETLINK_SMC		22	/* SMC monitoring */
+
+#define NETLINK_INET_DIAG	NETLINK_SOCK_DIAG
+
+#define MAX_LINKS 32		
+
+struct sockaddr_nl {
+	__kernel_sa_family_t	nl_family;	/* AF_NETLINK	*/
+	unsigned short	nl_pad;		/* zero		*/
+	__u32		nl_pid;		/* port ID	*/
+       	__u32		nl_groups;	/* multicast groups mask */
+};
+
+struct nlmsghdr {
+	__u32		nlmsg_len;	/* Length of message including header */
+	__u16		nlmsg_type;	/* Message content */
+	__u16		nlmsg_flags;	/* Additional flags */
+	__u32		nlmsg_seq;	/* Sequence number */
+	__u32		nlmsg_pid;	/* Sending process port ID */
+};
+
+/* Flags values */
+
+#define NLM_F_REQUEST		0x01	/* It is request message. 	*/
+#define NLM_F_MULTI		0x02	/* Multipart message, terminated by NLMSG_DONE */
+#define NLM_F_ACK		0x04	/* Reply with ack, with zero or error code */
+#define NLM_F_ECHO		0x08	/* Echo this request 		*/
+#define NLM_F_DUMP_INTR		0x10	/* Dump was inconsistent due to sequence change */
+#define NLM_F_DUMP_FILTERED	0x20	/* Dump was filtered as requested */
+
+/* Modifiers to GET request */
+#define NLM_F_ROOT	0x100	/* specify tree	root	*/
+#define NLM_F_MATCH	0x200	/* return all matching	*/
+#define NLM_F_ATOMIC	0x400	/* atomic GET		*/
+#define NLM_F_DUMP	(NLM_F_ROOT|NLM_F_MATCH)
+
+/* Modifiers to NEW request */
+#define NLM_F_REPLACE	0x100	/* Override existing		*/
+#define NLM_F_EXCL	0x200	/* Do not touch, if it exists	*/
+#define NLM_F_CREATE	0x400	/* Create, if it does not exist	*/
+#define NLM_F_APPEND	0x800	/* Add to end of list		*/
+
+/* Modifiers to DELETE request */
+#define NLM_F_NONREC	0x100	/* Do not delete recursively	*/
+
+/* Flags for ACK message */
+#define NLM_F_CAPPED	0x100	/* request was capped */
+#define NLM_F_ACK_TLVS	0x200	/* extended ACK TVLs were included */
+
+/*
+   4.4BSD ADD		NLM_F_CREATE|NLM_F_EXCL
+   4.4BSD CHANGE	NLM_F_REPLACE
+
+   True CHANGE		NLM_F_CREATE|NLM_F_REPLACE
+   Append		NLM_F_CREATE
+   Check		NLM_F_EXCL
+ */
+
+#define NLMSG_ALIGNTO	4U
+#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
+#define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
+#define NLMSG_LENGTH(len) ((len) + NLMSG_HDRLEN)
+#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
+#define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
+#define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
+				  (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
+#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len <= (len))
+#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
+
+#define NLMSG_NOOP		0x1	/* Nothing.		*/
+#define NLMSG_ERROR		0x2	/* Error		*/
+#define NLMSG_DONE		0x3	/* End of a dump	*/
+#define NLMSG_OVERRUN		0x4	/* Data lost		*/
+
+#define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */
+
+struct nlmsgerr {
+	int		error;
+	struct nlmsghdr msg;
+	/*
+	 * followed by the message contents unless NETLINK_CAP_ACK was set
+	 * or the ACK indicates success (error == 0)
+	 * message length is aligned with NLMSG_ALIGN()
+	 */
+	/*
+	 * followed by TLVs defined in enum nlmsgerr_attrs
+	 * if NETLINK_EXT_ACK was set
+	 */
+};
+
+/**
+ * enum nlmsgerr_attrs - nlmsgerr attributes
+ * @NLMSGERR_ATTR_UNUSED: unused
+ * @NLMSGERR_ATTR_MSG: error message string (string)
+ * @NLMSGERR_ATTR_OFFS: offset of the invalid attribute in the original
+ *	 message, counting from the beginning of the header (u32)
+ * @NLMSGERR_ATTR_COOKIE: arbitrary subsystem specific cookie to
+ *	be used - in the success case - to identify a created
+ *	object or operation or similar (binary)
+ * @__NLMSGERR_ATTR_MAX: number of attributes
+ * @NLMSGERR_ATTR_MAX: highest attribute number
+ */
+enum nlmsgerr_attrs {
+	NLMSGERR_ATTR_UNUSED,
+	NLMSGERR_ATTR_MSG,
+	NLMSGERR_ATTR_OFFS,
+	NLMSGERR_ATTR_COOKIE,
+
+	__NLMSGERR_ATTR_MAX,
+	NLMSGERR_ATTR_MAX = __NLMSGERR_ATTR_MAX - 1
+};
+
+#define NETLINK_ADD_MEMBERSHIP		1
+#define NETLINK_DROP_MEMBERSHIP		2
+#define NETLINK_PKTINFO			3
+#define NETLINK_BROADCAST_ERROR		4
+#define NETLINK_NO_ENOBUFS		5
+#ifndef __KERNEL__
+#define NETLINK_RX_RING			6
+#define NETLINK_TX_RING			7
+#endif
+#define NETLINK_LISTEN_ALL_NSID		8
+#define NETLINK_LIST_MEMBERSHIPS	9
+#define NETLINK_CAP_ACK			10
+#define NETLINK_EXT_ACK			11
+
+struct nl_pktinfo {
+	__u32	group;
+};
+
+struct nl_mmap_req {
+	unsigned int	nm_block_size;
+	unsigned int	nm_block_nr;
+	unsigned int	nm_frame_size;
+	unsigned int	nm_frame_nr;
+};
+
+struct nl_mmap_hdr {
+	unsigned int	nm_status;
+	unsigned int	nm_len;
+	__u32		nm_group;
+	/* credentials */
+	__u32		nm_pid;
+	__u32		nm_uid;
+	__u32		nm_gid;
+};
+
+#ifndef __KERNEL__
+enum nl_mmap_status {
+	NL_MMAP_STATUS_UNUSED,
+	NL_MMAP_STATUS_RESERVED,
+	NL_MMAP_STATUS_VALID,
+	NL_MMAP_STATUS_COPY,
+	NL_MMAP_STATUS_SKIP,
+};
+
+#define NL_MMAP_MSG_ALIGNMENT		NLMSG_ALIGNTO
+#define NL_MMAP_MSG_ALIGN(sz)		__ALIGN_KERNEL(sz, NL_MMAP_MSG_ALIGNMENT)
+#define NL_MMAP_HDRLEN			NL_MMAP_MSG_ALIGN(sizeof(struct nl_mmap_hdr))
+#endif
+
+#define NET_MAJOR 36		/* Major 36 is reserved for networking 						*/
+
+enum {
+	NETLINK_UNCONNECTED = 0,
+	NETLINK_CONNECTED,
+};
+
+/*
+ *  <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ * |        Header       | Pad |     Payload       | Pad |
+ * |   (struct nlattr)   | ing |                   | ing |
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ *  <-------------- nlattr->nla_len -------------->
+ */
+
+struct nlattr {
+	__u16           nla_len;
+	__u16           nla_type;
+};
+
+/*
+ * nla_type (16 bits)
+ * +---+---+-------------------------------+
+ * | N | O | Attribute Type                |
+ * +---+---+-------------------------------+
+ * N := Carries nested attributes
+ * O := Payload stored in network byte order
+ *
+ * Note: The N and O flag are mutually exclusive.
+ */
+#define NLA_F_NESTED		(1 << 15)
+#define NLA_F_NET_BYTEORDER	(1 << 14)
+#define NLA_TYPE_MASK		~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
+
+#define NLA_ALIGNTO		4
+#define NLA_ALIGN(len)		(((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
+#define NLA_HDRLEN		((int) NLA_ALIGN(sizeof(struct nlattr)))
+
+/* Generic 32 bitflags attribute content sent to the kernel.
+ *
+ * The value is a bitmap that defines the values being set
+ * The selector is a bitmask that defines which value is legit
+ *
+ * Examples:
+ *  value = 0x0, and selector = 0x1
+ *  implies we are selecting bit 1 and we want to set its value to 0.
+ *
+ *  value = 0x2, and selector = 0x2
+ *  implies we are selecting bit 2 and we want to set its value to 1.
+ *
+ */
+struct nla_bitfield32 {
+	__u32 value;
+	__u32 selector;
+};
+
+#endif /* _UAPI__LINUX_NETLINK_H */
diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h
new file mode 100644
index 000000000..a45e7b4f0
--- /dev/null
+++ b/tools/include/uapi/linux/perf_event.h
@@ -0,0 +1,1130 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Performance events:
+ *
+ *    Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra
+ *
+ * Data type definitions, declarations, prototypes.
+ *
+ *    Started by: Thomas Gleixner and Ingo Molnar
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+#ifndef _UAPI_LINUX_PERF_EVENT_H
+#define _UAPI_LINUX_PERF_EVENT_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <asm/byteorder.h>
+
+/*
+ * User-space ABI bits:
+ */
+
+/*
+ * attr.type
+ */
+enum perf_type_id {
+	PERF_TYPE_HARDWARE			= 0,
+	PERF_TYPE_SOFTWARE			= 1,
+	PERF_TYPE_TRACEPOINT			= 2,
+	PERF_TYPE_HW_CACHE			= 3,
+	PERF_TYPE_RAW				= 4,
+	PERF_TYPE_BREAKPOINT			= 5,
+
+	PERF_TYPE_MAX,				/* non-ABI */
+};
+
+/*
+ * Generalized performance event event_id types, used by the
+ * attr.event_id parameter of the sys_perf_event_open()
+ * syscall:
+ */
+enum perf_hw_id {
+	/*
+	 * Common hardware events, generalized by the kernel:
+	 */
+	PERF_COUNT_HW_CPU_CYCLES		= 0,
+	PERF_COUNT_HW_INSTRUCTIONS		= 1,
+	PERF_COUNT_HW_CACHE_REFERENCES		= 2,
+	PERF_COUNT_HW_CACHE_MISSES		= 3,
+	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
+	PERF_COUNT_HW_BRANCH_MISSES		= 5,
+	PERF_COUNT_HW_BUS_CYCLES		= 6,
+	PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	= 7,
+	PERF_COUNT_HW_STALLED_CYCLES_BACKEND	= 8,
+	PERF_COUNT_HW_REF_CPU_CYCLES		= 9,
+
+	PERF_COUNT_HW_MAX,			/* non-ABI */
+};
+
+/*
+ * Generalized hardware cache events:
+ *
+ *       { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
+ *       { read, write, prefetch } x
+ *       { accesses, misses }
+ */
+enum perf_hw_cache_id {
+	PERF_COUNT_HW_CACHE_L1D			= 0,
+	PERF_COUNT_HW_CACHE_L1I			= 1,
+	PERF_COUNT_HW_CACHE_LL			= 2,
+	PERF_COUNT_HW_CACHE_DTLB		= 3,
+	PERF_COUNT_HW_CACHE_ITLB		= 4,
+	PERF_COUNT_HW_CACHE_BPU			= 5,
+	PERF_COUNT_HW_CACHE_NODE		= 6,
+
+	PERF_COUNT_HW_CACHE_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_id {
+	PERF_COUNT_HW_CACHE_OP_READ		= 0,
+	PERF_COUNT_HW_CACHE_OP_WRITE		= 1,
+	PERF_COUNT_HW_CACHE_OP_PREFETCH		= 2,
+
+	PERF_COUNT_HW_CACHE_OP_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_result_id {
+	PERF_COUNT_HW_CACHE_RESULT_ACCESS	= 0,
+	PERF_COUNT_HW_CACHE_RESULT_MISS		= 1,
+
+	PERF_COUNT_HW_CACHE_RESULT_MAX,		/* non-ABI */
+};
+
+/*
+ * Special "software" events provided by the kernel, even if the hardware
+ * does not support performance events. These events measure various
+ * physical and sw events of the kernel (and allow the profiling of them as
+ * well):
+ */
+enum perf_sw_ids {
+	PERF_COUNT_SW_CPU_CLOCK			= 0,
+	PERF_COUNT_SW_TASK_CLOCK		= 1,
+	PERF_COUNT_SW_PAGE_FAULTS		= 2,
+	PERF_COUNT_SW_CONTEXT_SWITCHES		= 3,
+	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
+	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
+	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
+	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
+	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
+	PERF_COUNT_SW_DUMMY			= 9,
+	PERF_COUNT_SW_BPF_OUTPUT		= 10,
+
+	PERF_COUNT_SW_MAX,			/* non-ABI */
+};
+
+/*
+ * Bits that can be set in attr.sample_type to request information
+ * in the overflow packets.
+ */
+enum perf_event_sample_format {
+	PERF_SAMPLE_IP				= 1U << 0,
+	PERF_SAMPLE_TID				= 1U << 1,
+	PERF_SAMPLE_TIME			= 1U << 2,
+	PERF_SAMPLE_ADDR			= 1U << 3,
+	PERF_SAMPLE_READ			= 1U << 4,
+	PERF_SAMPLE_CALLCHAIN			= 1U << 5,
+	PERF_SAMPLE_ID				= 1U << 6,
+	PERF_SAMPLE_CPU				= 1U << 7,
+	PERF_SAMPLE_PERIOD			= 1U << 8,
+	PERF_SAMPLE_STREAM_ID			= 1U << 9,
+	PERF_SAMPLE_RAW				= 1U << 10,
+	PERF_SAMPLE_BRANCH_STACK		= 1U << 11,
+	PERF_SAMPLE_REGS_USER			= 1U << 12,
+	PERF_SAMPLE_STACK_USER			= 1U << 13,
+	PERF_SAMPLE_WEIGHT			= 1U << 14,
+	PERF_SAMPLE_DATA_SRC			= 1U << 15,
+	PERF_SAMPLE_IDENTIFIER			= 1U << 16,
+	PERF_SAMPLE_TRANSACTION			= 1U << 17,
+	PERF_SAMPLE_REGS_INTR			= 1U << 18,
+	PERF_SAMPLE_PHYS_ADDR			= 1U << 19,
+
+	PERF_SAMPLE_MAX = 1U << 20,		/* non-ABI */
+
+	__PERF_SAMPLE_CALLCHAIN_EARLY		= 1ULL << 63, /* non-ABI; internal use */
+};
+
+/*
+ * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
+ *
+ * If the user does not pass priv level information via branch_sample_type,
+ * the kernel uses the event's priv level. Branch and event priv levels do
+ * not have to match. Branch priv level is checked for permissions.
+ *
+ * The branch types can be combined, however BRANCH_ANY covers all types
+ * of branches and therefore it supersedes all the other types.
+ */
+enum perf_branch_sample_type_shift {
+	PERF_SAMPLE_BRANCH_USER_SHIFT		= 0, /* user branches */
+	PERF_SAMPLE_BRANCH_KERNEL_SHIFT		= 1, /* kernel branches */
+	PERF_SAMPLE_BRANCH_HV_SHIFT		= 2, /* hypervisor branches */
+
+	PERF_SAMPLE_BRANCH_ANY_SHIFT		= 3, /* any branch types */
+	PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT	= 4, /* any call branch */
+	PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT	= 5, /* any return branch */
+	PERF_SAMPLE_BRANCH_IND_CALL_SHIFT	= 6, /* indirect calls */
+	PERF_SAMPLE_BRANCH_ABORT_TX_SHIFT	= 7, /* transaction aborts */
+	PERF_SAMPLE_BRANCH_IN_TX_SHIFT		= 8, /* in transaction */
+	PERF_SAMPLE_BRANCH_NO_TX_SHIFT		= 9, /* not in transaction */
+	PERF_SAMPLE_BRANCH_COND_SHIFT		= 10, /* conditional branches */
+
+	PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT	= 11, /* call/ret stack */
+	PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT	= 12, /* indirect jumps */
+	PERF_SAMPLE_BRANCH_CALL_SHIFT		= 13, /* direct call */
+
+	PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT	= 14, /* no flags */
+	PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT	= 15, /* no cycles */
+
+	PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT	= 16, /* save branch type */
+
+	PERF_SAMPLE_BRANCH_MAX_SHIFT		/* non-ABI */
+};
+
+enum perf_branch_sample_type {
+	PERF_SAMPLE_BRANCH_USER		= 1U << PERF_SAMPLE_BRANCH_USER_SHIFT,
+	PERF_SAMPLE_BRANCH_KERNEL	= 1U << PERF_SAMPLE_BRANCH_KERNEL_SHIFT,
+	PERF_SAMPLE_BRANCH_HV		= 1U << PERF_SAMPLE_BRANCH_HV_SHIFT,
+
+	PERF_SAMPLE_BRANCH_ANY		= 1U << PERF_SAMPLE_BRANCH_ANY_SHIFT,
+	PERF_SAMPLE_BRANCH_ANY_CALL	= 1U << PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT,
+	PERF_SAMPLE_BRANCH_ANY_RETURN	= 1U << PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT,
+	PERF_SAMPLE_BRANCH_IND_CALL	= 1U << PERF_SAMPLE_BRANCH_IND_CALL_SHIFT,
+	PERF_SAMPLE_BRANCH_ABORT_TX	= 1U << PERF_SAMPLE_BRANCH_ABORT_TX_SHIFT,
+	PERF_SAMPLE_BRANCH_IN_TX	= 1U << PERF_SAMPLE_BRANCH_IN_TX_SHIFT,
+	PERF_SAMPLE_BRANCH_NO_TX	= 1U << PERF_SAMPLE_BRANCH_NO_TX_SHIFT,
+	PERF_SAMPLE_BRANCH_COND		= 1U << PERF_SAMPLE_BRANCH_COND_SHIFT,
+
+	PERF_SAMPLE_BRANCH_CALL_STACK	= 1U << PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT,
+	PERF_SAMPLE_BRANCH_IND_JUMP	= 1U << PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT,
+	PERF_SAMPLE_BRANCH_CALL		= 1U << PERF_SAMPLE_BRANCH_CALL_SHIFT,
+
+	PERF_SAMPLE_BRANCH_NO_FLAGS	= 1U << PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT,
+	PERF_SAMPLE_BRANCH_NO_CYCLES	= 1U << PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT,
+
+	PERF_SAMPLE_BRANCH_TYPE_SAVE	=
+		1U << PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT,
+
+	PERF_SAMPLE_BRANCH_MAX		= 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT,
+};
+
+/*
+ * Common flow change classification
+ */
+enum {
+	PERF_BR_UNKNOWN		= 0,	/* unknown */
+	PERF_BR_COND		= 1,	/* conditional */
+	PERF_BR_UNCOND		= 2,	/* unconditional  */
+	PERF_BR_IND		= 3,	/* indirect */
+	PERF_BR_CALL		= 4,	/* function call */
+	PERF_BR_IND_CALL	= 5,	/* indirect function call */
+	PERF_BR_RET		= 6,	/* function return */
+	PERF_BR_SYSCALL		= 7,	/* syscall */
+	PERF_BR_SYSRET		= 8,	/* syscall return */
+	PERF_BR_COND_CALL	= 9,	/* conditional function call */
+	PERF_BR_COND_RET	= 10,	/* conditional function return */
+	PERF_BR_MAX,
+};
+
+#define PERF_SAMPLE_BRANCH_PLM_ALL \
+	(PERF_SAMPLE_BRANCH_USER|\
+	 PERF_SAMPLE_BRANCH_KERNEL|\
+	 PERF_SAMPLE_BRANCH_HV)
+
+/*
+ * Values to determine ABI of the registers dump.
+ */
+enum perf_sample_regs_abi {
+	PERF_SAMPLE_REGS_ABI_NONE	= 0,
+	PERF_SAMPLE_REGS_ABI_32		= 1,
+	PERF_SAMPLE_REGS_ABI_64		= 2,
+};
+
+/*
+ * Values for the memory transaction event qualifier, mostly for
+ * abort events. Multiple bits can be set.
+ */
+enum {
+	PERF_TXN_ELISION        = (1 << 0), /* From elision */
+	PERF_TXN_TRANSACTION    = (1 << 1), /* From transaction */
+	PERF_TXN_SYNC           = (1 << 2), /* Instruction is related */
+	PERF_TXN_ASYNC          = (1 << 3), /* Instruction not related */
+	PERF_TXN_RETRY          = (1 << 4), /* Retry possible */
+	PERF_TXN_CONFLICT       = (1 << 5), /* Conflict abort */
+	PERF_TXN_CAPACITY_WRITE = (1 << 6), /* Capacity write abort */
+	PERF_TXN_CAPACITY_READ  = (1 << 7), /* Capacity read abort */
+
+	PERF_TXN_MAX	        = (1 << 8), /* non-ABI */
+
+	/* bits 32..63 are reserved for the abort code */
+
+	PERF_TXN_ABORT_MASK  = (0xffffffffULL << 32),
+	PERF_TXN_ABORT_SHIFT = 32,
+};
+
+/*
+ * The format of the data returned by read() on a perf event fd,
+ * as specified by attr.read_format:
+ *
+ * struct read_format {
+ *	{ u64		value;
+ *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ *	  { u64		id;           } && PERF_FORMAT_ID
+ *	} && !PERF_FORMAT_GROUP
+ *
+ *	{ u64		nr;
+ *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ *	  { u64		value;
+ *	    { u64	id;           } && PERF_FORMAT_ID
+ *	  }		cntr[nr];
+ *	} && PERF_FORMAT_GROUP
+ * };
+ */
+enum perf_event_read_format {
+	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
+	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
+	PERF_FORMAT_ID				= 1U << 2,
+	PERF_FORMAT_GROUP			= 1U << 3,
+
+	PERF_FORMAT_MAX = 1U << 4,		/* non-ABI */
+};
+
+#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
+#define PERF_ATTR_SIZE_VER1	72	/* add: config2 */
+#define PERF_ATTR_SIZE_VER2	80	/* add: branch_sample_type */
+#define PERF_ATTR_SIZE_VER3	96	/* add: sample_regs_user */
+					/* add: sample_stack_user */
+#define PERF_ATTR_SIZE_VER4	104	/* add: sample_regs_intr */
+#define PERF_ATTR_SIZE_VER5	112	/* add: aux_watermark */
+
+/*
+ * Hardware event_id to monitor via a performance monitoring event:
+ *
+ * @sample_max_stack: Max number of frame pointers in a callchain,
+ *		      should be < /proc/sys/kernel/perf_event_max_stack
+ */
+struct perf_event_attr {
+
+	/*
+	 * Major type: hardware/software/tracepoint/etc.
+	 */
+	__u32			type;
+
+	/*
+	 * Size of the attr structure, for fwd/bwd compat.
+	 */
+	__u32			size;
+
+	/*
+	 * Type specific configuration information.
+	 */
+	__u64			config;
+
+	union {
+		__u64		sample_period;
+		__u64		sample_freq;
+	};
+
+	__u64			sample_type;
+	__u64			read_format;
+
+	__u64			disabled       :  1, /* off by default        */
+				inherit	       :  1, /* children inherit it   */
+				pinned	       :  1, /* must always be on PMU */
+				exclusive      :  1, /* only group on PMU     */
+				exclude_user   :  1, /* don't count user      */
+				exclude_kernel :  1, /* ditto kernel          */
+				exclude_hv     :  1, /* ditto hypervisor      */
+				exclude_idle   :  1, /* don't count when idle */
+				mmap           :  1, /* include mmap data     */
+				comm	       :  1, /* include comm data     */
+				freq           :  1, /* use freq, not period  */
+				inherit_stat   :  1, /* per task counts       */
+				enable_on_exec :  1, /* next exec enables     */
+				task           :  1, /* trace fork/exit       */
+				watermark      :  1, /* wakeup_watermark      */
+				/*
+				 * precise_ip:
+				 *
+				 *  0 - SAMPLE_IP can have arbitrary skid
+				 *  1 - SAMPLE_IP must have constant skid
+				 *  2 - SAMPLE_IP requested to have 0 skid
+				 *  3 - SAMPLE_IP must have 0 skid
+				 *
+				 *  See also PERF_RECORD_MISC_EXACT_IP
+				 */
+				precise_ip     :  2, /* skid constraint       */
+				mmap_data      :  1, /* non-exec mmap data    */
+				sample_id_all  :  1, /* sample_type all events */
+
+				exclude_host   :  1, /* don't count in host   */
+				exclude_guest  :  1, /* don't count in guest  */
+
+				exclude_callchain_kernel : 1, /* exclude kernel callchains */
+				exclude_callchain_user   : 1, /* exclude user callchains */
+				mmap2          :  1, /* include mmap with inode data     */
+				comm_exec      :  1, /* flag comm events that are due to an exec */
+				use_clockid    :  1, /* use @clockid for time fields */
+				context_switch :  1, /* context switch data */
+				write_backward :  1, /* Write ring buffer from end to beginning */
+				namespaces     :  1, /* include namespaces data */
+				__reserved_1   : 35;
+
+	union {
+		__u32		wakeup_events;	  /* wakeup every n events */
+		__u32		wakeup_watermark; /* bytes before wakeup   */
+	};
+
+	__u32			bp_type;
+	union {
+		__u64		bp_addr;
+		__u64		kprobe_func; /* for perf_kprobe */
+		__u64		uprobe_path; /* for perf_uprobe */
+		__u64		config1; /* extension of config */
+	};
+	union {
+		__u64		bp_len;
+		__u64		kprobe_addr; /* when kprobe_func == NULL */
+		__u64		probe_offset; /* for perf_[k,u]probe */
+		__u64		config2; /* extension of config1 */
+	};
+	__u64	branch_sample_type; /* enum perf_branch_sample_type */
+
+	/*
+	 * Defines set of user regs to dump on samples.
+	 * See asm/perf_regs.h for details.
+	 */
+	__u64	sample_regs_user;
+
+	/*
+	 * Defines size of the user stack to dump on samples.
+	 */
+	__u32	sample_stack_user;
+
+	__s32	clockid;
+	/*
+	 * Defines set of regs to dump for each sample
+	 * state captured on:
+	 *  - precise = 0: PMU interrupt
+	 *  - precise > 0: sampled instruction
+	 *
+	 * See asm/perf_regs.h for details.
+	 */
+	__u64	sample_regs_intr;
+
+	/*
+	 * Wakeup watermark for AUX area
+	 */
+	__u32	aux_watermark;
+	__u16	sample_max_stack;
+	__u16	__reserved_2;	/* align to __u64 */
+};
+
+/*
+ * Structure used by below PERF_EVENT_IOC_QUERY_BPF command
+ * to query bpf programs attached to the same perf tracepoint
+ * as the given perf event.
+ */
+struct perf_event_query_bpf {
+	/*
+	 * The below ids array length
+	 */
+	__u32	ids_len;
+	/*
+	 * Set by the kernel to indicate the number of
+	 * available programs
+	 */
+	__u32	prog_cnt;
+	/*
+	 * User provided buffer to store program ids
+	 */
+	__u32	ids[0];
+};
+
+#define perf_flags(attr)	(*(&(attr)->read_format + 1))
+
+/*
+ * Ioctls that can be done on a perf event fd:
+ */
+#define PERF_EVENT_IOC_ENABLE			_IO ('$', 0)
+#define PERF_EVENT_IOC_DISABLE			_IO ('$', 1)
+#define PERF_EVENT_IOC_REFRESH			_IO ('$', 2)
+#define PERF_EVENT_IOC_RESET			_IO ('$', 3)
+#define PERF_EVENT_IOC_PERIOD			_IOW('$', 4, __u64)
+#define PERF_EVENT_IOC_SET_OUTPUT		_IO ('$', 5)
+#define PERF_EVENT_IOC_SET_FILTER		_IOW('$', 6, char *)
+#define PERF_EVENT_IOC_ID			_IOR('$', 7, __u64 *)
+#define PERF_EVENT_IOC_SET_BPF			_IOW('$', 8, __u32)
+#define PERF_EVENT_IOC_PAUSE_OUTPUT		_IOW('$', 9, __u32)
+#define PERF_EVENT_IOC_QUERY_BPF		_IOWR('$', 10, struct perf_event_query_bpf *)
+#define PERF_EVENT_IOC_MODIFY_ATTRIBUTES	_IOW('$', 11, struct perf_event_attr *)
+
+enum perf_event_ioc_flags {
+	PERF_IOC_FLAG_GROUP		= 1U << 0,
+};
+
+/*
+ * Structure of the page that can be mapped via mmap
+ */
+struct perf_event_mmap_page {
+	__u32	version;		/* version number of this structure */
+	__u32	compat_version;		/* lowest version this is compat with */
+
+	/*
+	 * Bits needed to read the hw events in user-space.
+	 *
+	 *   u32 seq, time_mult, time_shift, index, width;
+	 *   u64 count, enabled, running;
+	 *   u64 cyc, time_offset;
+	 *   s64 pmc = 0;
+	 *
+	 *   do {
+	 *     seq = pc->lock;
+	 *     barrier()
+	 *
+	 *     enabled = pc->time_enabled;
+	 *     running = pc->time_running;
+	 *
+	 *     if (pc->cap_usr_time && enabled != running) {
+	 *       cyc = rdtsc();
+	 *       time_offset = pc->time_offset;
+	 *       time_mult   = pc->time_mult;
+	 *       time_shift  = pc->time_shift;
+	 *     }
+	 *
+	 *     index = pc->index;
+	 *     count = pc->offset;
+	 *     if (pc->cap_user_rdpmc && index) {
+	 *       width = pc->pmc_width;
+	 *       pmc = rdpmc(index - 1);
+	 *     }
+	 *
+	 *     barrier();
+	 *   } while (pc->lock != seq);
+	 *
+	 * NOTE: for obvious reason this only works on self-monitoring
+	 *       processes.
+	 */
+	__u32	lock;			/* seqlock for synchronization */
+	__u32	index;			/* hardware event identifier */
+	__s64	offset;			/* add to hardware event value */
+	__u64	time_enabled;		/* time event active */
+	__u64	time_running;		/* time event on cpu */
+	union {
+		__u64	capabilities;
+		struct {
+			__u64	cap_bit0		: 1, /* Always 0, deprecated, see commit 860f085b74e9 */
+				cap_bit0_is_deprecated	: 1, /* Always 1, signals that bit 0 is zero */
+
+				cap_user_rdpmc		: 1, /* The RDPMC instruction can be used to read counts */
+				cap_user_time		: 1, /* The time_* fields are used */
+				cap_user_time_zero	: 1, /* The time_zero field is used */
+				cap_____res		: 59;
+		};
+	};
+
+	/*
+	 * If cap_user_rdpmc this field provides the bit-width of the value
+	 * read using the rdpmc() or equivalent instruction. This can be used
+	 * to sign extend the result like:
+	 *
+	 *   pmc <<= 64 - width;
+	 *   pmc >>= 64 - width; // signed shift right
+	 *   count += pmc;
+	 */
+	__u16	pmc_width;
+
+	/*
+	 * If cap_usr_time the below fields can be used to compute the time
+	 * delta since time_enabled (in ns) using rdtsc or similar.
+	 *
+	 *   u64 quot, rem;
+	 *   u64 delta;
+	 *
+	 *   quot = (cyc >> time_shift);
+	 *   rem = cyc & (((u64)1 << time_shift) - 1);
+	 *   delta = time_offset + quot * time_mult +
+	 *              ((rem * time_mult) >> time_shift);
+	 *
+	 * Where time_offset,time_mult,time_shift and cyc are read in the
+	 * seqcount loop described above. This delta can then be added to
+	 * enabled and possible running (if index), improving the scaling:
+	 *
+	 *   enabled += delta;
+	 *   if (index)
+	 *     running += delta;
+	 *
+	 *   quot = count / running;
+	 *   rem  = count % running;
+	 *   count = quot * enabled + (rem * enabled) / running;
+	 */
+	__u16	time_shift;
+	__u32	time_mult;
+	__u64	time_offset;
+	/*
+	 * If cap_usr_time_zero, the hardware clock (e.g. TSC) can be calculated
+	 * from sample timestamps.
+	 *
+	 *   time = timestamp - time_zero;
+	 *   quot = time / time_mult;
+	 *   rem  = time % time_mult;
+	 *   cyc = (quot << time_shift) + (rem << time_shift) / time_mult;
+	 *
+	 * And vice versa:
+	 *
+	 *   quot = cyc >> time_shift;
+	 *   rem  = cyc & (((u64)1 << time_shift) - 1);
+	 *   timestamp = time_zero + quot * time_mult +
+	 *               ((rem * time_mult) >> time_shift);
+	 */
+	__u64	time_zero;
+	__u32	size;			/* Header size up to __reserved[] fields. */
+
+		/*
+		 * Hole for extension of the self monitor capabilities
+		 */
+
+	__u8	__reserved[118*8+4];	/* align to 1k. */
+
+	/*
+	 * Control data for the mmap() data buffer.
+	 *
+	 * User-space reading the @data_head value should issue an smp_rmb(),
+	 * after reading this value.
+	 *
+	 * When the mapping is PROT_WRITE the @data_tail value should be
+	 * written by userspace to reflect the last read data, after issueing
+	 * an smp_mb() to separate the data read from the ->data_tail store.
+	 * In this case the kernel will not over-write unread data.
+	 *
+	 * See perf_output_put_handle() for the data ordering.
+	 *
+	 * data_{offset,size} indicate the location and size of the perf record
+	 * buffer within the mmapped area.
+	 */
+	__u64   data_head;		/* head in the data section */
+	__u64	data_tail;		/* user-space written tail */
+	__u64	data_offset;		/* where the buffer starts */
+	__u64	data_size;		/* data buffer size */
+
+	/*
+	 * AUX area is defined by aux_{offset,size} fields that should be set
+	 * by the userspace, so that
+	 *
+	 *   aux_offset >= data_offset + data_size
+	 *
+	 * prior to mmap()ing it. Size of the mmap()ed area should be aux_size.
+	 *
+	 * Ring buffer pointers aux_{head,tail} have the same semantics as
+	 * data_{head,tail} and same ordering rules apply.
+	 */
+	__u64	aux_head;
+	__u64	aux_tail;
+	__u64	aux_offset;
+	__u64	aux_size;
+};
+
+#define PERF_RECORD_MISC_CPUMODE_MASK		(7 << 0)
+#define PERF_RECORD_MISC_CPUMODE_UNKNOWN	(0 << 0)
+#define PERF_RECORD_MISC_KERNEL			(1 << 0)
+#define PERF_RECORD_MISC_USER			(2 << 0)
+#define PERF_RECORD_MISC_HYPERVISOR		(3 << 0)
+#define PERF_RECORD_MISC_GUEST_KERNEL		(4 << 0)
+#define PERF_RECORD_MISC_GUEST_USER		(5 << 0)
+
+/*
+ * Indicates that /proc/PID/maps parsing are truncated by time out.
+ */
+#define PERF_RECORD_MISC_PROC_MAP_PARSE_TIMEOUT	(1 << 12)
+/*
+ * Following PERF_RECORD_MISC_* are used on different
+ * events, so can reuse the same bit position:
+ *
+ *   PERF_RECORD_MISC_MMAP_DATA  - PERF_RECORD_MMAP* events
+ *   PERF_RECORD_MISC_COMM_EXEC  - PERF_RECORD_COMM event
+ *   PERF_RECORD_MISC_SWITCH_OUT - PERF_RECORD_SWITCH* events
+ */
+#define PERF_RECORD_MISC_MMAP_DATA		(1 << 13)
+#define PERF_RECORD_MISC_COMM_EXEC		(1 << 13)
+#define PERF_RECORD_MISC_SWITCH_OUT		(1 << 13)
+/*
+ * These PERF_RECORD_MISC_* flags below are safely reused
+ * for the following events:
+ *
+ *   PERF_RECORD_MISC_EXACT_IP           - PERF_RECORD_SAMPLE of precise events
+ *   PERF_RECORD_MISC_SWITCH_OUT_PREEMPT - PERF_RECORD_SWITCH* events
+ *
+ *
+ * PERF_RECORD_MISC_EXACT_IP:
+ *   Indicates that the content of PERF_SAMPLE_IP points to
+ *   the actual instruction that triggered the event. See also
+ *   perf_event_attr::precise_ip.
+ *
+ * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT:
+ *   Indicates that thread was preempted in TASK_RUNNING state.
+ */
+#define PERF_RECORD_MISC_EXACT_IP		(1 << 14)
+#define PERF_RECORD_MISC_SWITCH_OUT_PREEMPT	(1 << 14)
+/*
+ * Reserve the last bit to indicate some extended misc field
+ */
+#define PERF_RECORD_MISC_EXT_RESERVED		(1 << 15)
+
+struct perf_event_header {
+	__u32	type;
+	__u16	misc;
+	__u16	size;
+};
+
+struct perf_ns_link_info {
+	__u64	dev;
+	__u64	ino;
+};
+
+enum {
+	NET_NS_INDEX		= 0,
+	UTS_NS_INDEX		= 1,
+	IPC_NS_INDEX		= 2,
+	PID_NS_INDEX		= 3,
+	USER_NS_INDEX		= 4,
+	MNT_NS_INDEX		= 5,
+	CGROUP_NS_INDEX		= 6,
+
+	NR_NAMESPACES,		/* number of available namespaces */
+};
+
+enum perf_event_type {
+
+	/*
+	 * If perf_event_attr.sample_id_all is set then all event types will
+	 * have the sample_type selected fields related to where/when
+	 * (identity) an event took place (TID, TIME, ID, STREAM_ID, CPU,
+	 * IDENTIFIER) described in PERF_RECORD_SAMPLE below, it will be stashed
+	 * just after the perf_event_header and the fields already present for
+	 * the existing fields, i.e. at the end of the payload. That way a newer
+	 * perf.data file will be supported by older perf tools, with these new
+	 * optional fields being ignored.
+	 *
+	 * struct sample_id {
+	 * 	{ u32			pid, tid; } && PERF_SAMPLE_TID
+	 * 	{ u64			time;     } && PERF_SAMPLE_TIME
+	 * 	{ u64			id;       } && PERF_SAMPLE_ID
+	 * 	{ u64			stream_id;} && PERF_SAMPLE_STREAM_ID
+	 * 	{ u32			cpu, res; } && PERF_SAMPLE_CPU
+	 *	{ u64			id;	  } && PERF_SAMPLE_IDENTIFIER
+	 * } && perf_event_attr::sample_id_all
+	 *
+	 * Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID.  The
+	 * advantage of PERF_SAMPLE_IDENTIFIER is that its position is fixed
+	 * relative to header.size.
+	 */
+
+	/*
+	 * The MMAP events record the PROT_EXEC mappings so that we can
+	 * correlate userspace IPs to code. They have the following structure:
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	u64				addr;
+	 *	u64				len;
+	 *	u64				pgoff;
+	 *	char				filename[];
+	 * 	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_MMAP			= 1,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				id;
+	 *	u64				lost;
+	 * 	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_LOST			= 2,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	char				comm[];
+	 * 	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_COMM			= 3,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
+	 *	u64				time;
+	 * 	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_EXIT			= 4,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				time;
+	 *	u64				id;
+	 *	u64				stream_id;
+	 * 	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_THROTTLE			= 5,
+	PERF_RECORD_UNTHROTTLE			= 6,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
+	 *	u64				time;
+	 * 	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_FORK			= 7,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, tid;
+	 *
+	 *	struct read_format		values;
+	 * 	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_READ			= 8,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	#
+	 *	# Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID.
+	 *	# The advantage of PERF_SAMPLE_IDENTIFIER is that its position
+	 *	# is fixed relative to header.
+	 *	#
+	 *
+	 *	{ u64			id;	  } && PERF_SAMPLE_IDENTIFIER
+	 *	{ u64			ip;	  } && PERF_SAMPLE_IP
+	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
+	 *	{ u64			time;     } && PERF_SAMPLE_TIME
+	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
+	 *	{ u64			id;	  } && PERF_SAMPLE_ID
+	 *	{ u64			stream_id;} && PERF_SAMPLE_STREAM_ID
+	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
+	 *	{ u64			period;   } && PERF_SAMPLE_PERIOD
+	 *
+	 *	{ struct read_format	values;	  } && PERF_SAMPLE_READ
+	 *
+	 *	{ u64			nr,
+	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
+	 *
+	 *	#
+	 *	# The RAW record below is opaque data wrt the ABI
+	 *	#
+	 *	# That is, the ABI doesn't make any promises wrt to
+	 *	# the stability of its content, it may vary depending
+	 *	# on event, hardware, kernel version and phase of
+	 *	# the moon.
+	 *	#
+	 *	# In other words, PERF_SAMPLE_RAW contents are not an ABI.
+	 *	#
+	 *
+	 *	{ u32			size;
+	 *	  char                  data[size];}&& PERF_SAMPLE_RAW
+	 *
+	 *	{ u64                   nr;
+	 *        { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
+	 *
+	 * 	{ u64			abi; # enum perf_sample_regs_abi
+	 * 	  u64			regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER
+	 *
+	 * 	{ u64			size;
+	 * 	  char			data[size];
+	 * 	  u64			dyn_size; } && PERF_SAMPLE_STACK_USER
+	 *
+	 *	{ u64			weight;   } && PERF_SAMPLE_WEIGHT
+	 *	{ u64			data_src; } && PERF_SAMPLE_DATA_SRC
+	 *	{ u64			transaction; } && PERF_SAMPLE_TRANSACTION
+	 *	{ u64			abi; # enum perf_sample_regs_abi
+	 *	  u64			regs[weight(mask)]; } && PERF_SAMPLE_REGS_INTR
+	 *	{ u64			phys_addr;} && PERF_SAMPLE_PHYS_ADDR
+	 * };
+	 */
+	PERF_RECORD_SAMPLE			= 9,
+
+	/*
+	 * The MMAP2 records are an augmented version of MMAP, they add
+	 * maj, min, ino numbers to be used to uniquely identify each mapping
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	u64				addr;
+	 *	u64				len;
+	 *	u64				pgoff;
+	 *	u32				maj;
+	 *	u32				min;
+	 *	u64				ino;
+	 *	u64				ino_generation;
+	 *	u32				prot, flags;
+	 *	char				filename[];
+	 * 	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_MMAP2			= 10,
+
+	/*
+	 * Records that new data landed in the AUX buffer part.
+	 *
+	 * struct {
+	 * 	struct perf_event_header	header;
+	 *
+	 * 	u64				aux_offset;
+	 * 	u64				aux_size;
+	 *	u64				flags;
+	 * 	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_AUX				= 11,
+
+	/*
+	 * Indicates that instruction trace has started
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid;
+	 *	u32				tid;
+	 *	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_ITRACE_START		= 12,
+
+	/*
+	 * Records the dropped/lost sample number.
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u64				lost;
+	 *	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_LOST_SAMPLES		= 13,
+
+	/*
+	 * Records a context switch in or out (flagged by
+	 * PERF_RECORD_MISC_SWITCH_OUT). See also
+	 * PERF_RECORD_SWITCH_CPU_WIDE.
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_SWITCH			= 14,
+
+	/*
+	 * CPU-wide version of PERF_RECORD_SWITCH with next_prev_pid and
+	 * next_prev_tid that are the next (switching out) or previous
+	 * (switching in) pid/tid.
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				next_prev_pid;
+	 *	u32				next_prev_tid;
+	 *	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_SWITCH_CPU_WIDE		= 15,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid;
+	 *	u32				tid;
+	 *	u64				nr_namespaces;
+	 *	{ u64				dev, inode; } [nr_namespaces];
+	 *	struct sample_id		sample_id;
+	 * };
+	 */
+	PERF_RECORD_NAMESPACES			= 16,
+
+	PERF_RECORD_MAX,			/* non-ABI */
+};
+
+#define PERF_MAX_STACK_DEPTH		127
+#define PERF_MAX_CONTEXTS_PER_STACK	  8
+
+enum perf_callchain_context {
+	PERF_CONTEXT_HV			= (__u64)-32,
+	PERF_CONTEXT_KERNEL		= (__u64)-128,
+	PERF_CONTEXT_USER		= (__u64)-512,
+
+	PERF_CONTEXT_GUEST		= (__u64)-2048,
+	PERF_CONTEXT_GUEST_KERNEL	= (__u64)-2176,
+	PERF_CONTEXT_GUEST_USER		= (__u64)-2560,
+
+	PERF_CONTEXT_MAX		= (__u64)-4095,
+};
+
+/**
+ * PERF_RECORD_AUX::flags bits
+ */
+#define PERF_AUX_FLAG_TRUNCATED		0x01	/* record was truncated to fit */
+#define PERF_AUX_FLAG_OVERWRITE		0x02	/* snapshot from overwrite mode */
+#define PERF_AUX_FLAG_PARTIAL		0x04	/* record contains gaps */
+#define PERF_AUX_FLAG_COLLISION		0x08	/* sample collided with another */
+
+#define PERF_FLAG_FD_NO_GROUP		(1UL << 0)
+#define PERF_FLAG_FD_OUTPUT		(1UL << 1)
+#define PERF_FLAG_PID_CGROUP		(1UL << 2) /* pid=cgroup id, per-cpu mode only */
+#define PERF_FLAG_FD_CLOEXEC		(1UL << 3) /* O_CLOEXEC */
+
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+union perf_mem_data_src {
+	__u64 val;
+	struct {
+		__u64   mem_op:5,	/* type of opcode */
+			mem_lvl:14,	/* memory hierarchy level */
+			mem_snoop:5,	/* snoop mode */
+			mem_lock:2,	/* lock instr */
+			mem_dtlb:7,	/* tlb access */
+			mem_lvl_num:4,	/* memory hierarchy level number */
+			mem_remote:1,   /* remote */
+			mem_snoopx:2,	/* snoop mode, ext */
+			mem_rsvd:24;
+	};
+};
+#elif defined(__BIG_ENDIAN_BITFIELD)
+union perf_mem_data_src {
+	__u64 val;
+	struct {
+		__u64	mem_rsvd:24,
+			mem_snoopx:2,	/* snoop mode, ext */
+			mem_remote:1,   /* remote */
+			mem_lvl_num:4,	/* memory hierarchy level number */
+			mem_dtlb:7,	/* tlb access */
+			mem_lock:2,	/* lock instr */
+			mem_snoop:5,	/* snoop mode */
+			mem_lvl:14,	/* memory hierarchy level */
+			mem_op:5;	/* type of opcode */
+	};
+};
+#else
+#error "Unknown endianness"
+#endif
+
+/* type of opcode (load/store/prefetch,code) */
+#define PERF_MEM_OP_NA		0x01 /* not available */
+#define PERF_MEM_OP_LOAD	0x02 /* load instruction */
+#define PERF_MEM_OP_STORE	0x04 /* store instruction */
+#define PERF_MEM_OP_PFETCH	0x08 /* prefetch */
+#define PERF_MEM_OP_EXEC	0x10 /* code (execution) */
+#define PERF_MEM_OP_SHIFT	0
+
+/* memory hierarchy (memory level, hit or miss) */
+#define PERF_MEM_LVL_NA		0x01  /* not available */
+#define PERF_MEM_LVL_HIT	0x02  /* hit level */
+#define PERF_MEM_LVL_MISS	0x04  /* miss level  */
+#define PERF_MEM_LVL_L1		0x08  /* L1 */
+#define PERF_MEM_LVL_LFB	0x10  /* Line Fill Buffer */
+#define PERF_MEM_LVL_L2		0x20  /* L2 */
+#define PERF_MEM_LVL_L3		0x40  /* L3 */
+#define PERF_MEM_LVL_LOC_RAM	0x80  /* Local DRAM */
+#define PERF_MEM_LVL_REM_RAM1	0x100 /* Remote DRAM (1 hop) */
+#define PERF_MEM_LVL_REM_RAM2	0x200 /* Remote DRAM (2 hops) */
+#define PERF_MEM_LVL_REM_CCE1	0x400 /* Remote Cache (1 hop) */
+#define PERF_MEM_LVL_REM_CCE2	0x800 /* Remote Cache (2 hops) */
+#define PERF_MEM_LVL_IO		0x1000 /* I/O memory */
+#define PERF_MEM_LVL_UNC	0x2000 /* Uncached memory */
+#define PERF_MEM_LVL_SHIFT	5
+
+#define PERF_MEM_REMOTE_REMOTE	0x01  /* Remote */
+#define PERF_MEM_REMOTE_SHIFT	37
+
+#define PERF_MEM_LVLNUM_L1	0x01 /* L1 */
+#define PERF_MEM_LVLNUM_L2	0x02 /* L2 */
+#define PERF_MEM_LVLNUM_L3	0x03 /* L3 */
+#define PERF_MEM_LVLNUM_L4	0x04 /* L4 */
+/* 5-0xa available */
+#define PERF_MEM_LVLNUM_ANY_CACHE 0x0b /* Any cache */
+#define PERF_MEM_LVLNUM_LFB	0x0c /* LFB */
+#define PERF_MEM_LVLNUM_RAM	0x0d /* RAM */
+#define PERF_MEM_LVLNUM_PMEM	0x0e /* PMEM */
+#define PERF_MEM_LVLNUM_NA	0x0f /* N/A */
+
+#define PERF_MEM_LVLNUM_SHIFT	33
+
+/* snoop mode */
+#define PERF_MEM_SNOOP_NA	0x01 /* not available */
+#define PERF_MEM_SNOOP_NONE	0x02 /* no snoop */
+#define PERF_MEM_SNOOP_HIT	0x04 /* snoop hit */
+#define PERF_MEM_SNOOP_MISS	0x08 /* snoop miss */
+#define PERF_MEM_SNOOP_HITM	0x10 /* snoop hit modified */
+#define PERF_MEM_SNOOP_SHIFT	19
+
+#define PERF_MEM_SNOOPX_FWD	0x01 /* forward */
+/* 1 free */
+#define PERF_MEM_SNOOPX_SHIFT	38
+
+/* locked instruction */
+#define PERF_MEM_LOCK_NA	0x01 /* not available */
+#define PERF_MEM_LOCK_LOCKED	0x02 /* locked transaction */
+#define PERF_MEM_LOCK_SHIFT	24
+
+/* TLB access */
+#define PERF_MEM_TLB_NA		0x01 /* not available */
+#define PERF_MEM_TLB_HIT	0x02 /* hit level */
+#define PERF_MEM_TLB_MISS	0x04 /* miss level */
+#define PERF_MEM_TLB_L1		0x08 /* L1 */
+#define PERF_MEM_TLB_L2		0x10 /* L2 */
+#define PERF_MEM_TLB_WK		0x20 /* Hardware Walker*/
+#define PERF_MEM_TLB_OS		0x40 /* OS fault handler */
+#define PERF_MEM_TLB_SHIFT	26
+
+#define PERF_MEM_S(a, s) \
+	(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
+
+/*
+ * single taken branch record layout:
+ *
+ *      from: source instruction (may not always be a branch insn)
+ *        to: branch target
+ *   mispred: branch target was mispredicted
+ * predicted: branch target was predicted
+ *
+ * support for mispred, predicted is optional. In case it
+ * is not supported mispred = predicted = 0.
+ *
+ *     in_tx: running in a hardware transaction
+ *     abort: aborting a hardware transaction
+ *    cycles: cycles from last branch (or 0 if not supported)
+ *      type: branch type
+ */
+struct perf_branch_entry {
+	__u64	from;
+	__u64	to;
+	__u64	mispred:1,  /* target mispredicted */
+		predicted:1,/* target predicted */
+		in_tx:1,    /* in transaction */
+		abort:1,    /* transaction abort */
+		cycles:16,  /* cycle count to last branch */
+		type:4,     /* branch type */
+		reserved:40;
+};
+
+#endif /* _UAPI_LINUX_PERF_EVENT_H */
diff --git a/tools/include/uapi/linux/prctl.h b/tools/include/uapi/linux/prctl.h
new file mode 100644
index 000000000..b17201edf
--- /dev/null
+++ b/tools/include/uapi/linux/prctl.h
@@ -0,0 +1,223 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_PRCTL_H
+#define _LINUX_PRCTL_H
+
+#include <linux/types.h>
+
+/* Values to pass as first argument to prctl() */
+
+#define PR_SET_PDEATHSIG  1  /* Second arg is a signal */
+#define PR_GET_PDEATHSIG  2  /* Second arg is a ptr to return the signal */
+
+/* Get/set current->mm->dumpable */
+#define PR_GET_DUMPABLE   3
+#define PR_SET_DUMPABLE   4
+
+/* Get/set unaligned access control bits (if meaningful) */
+#define PR_GET_UNALIGN	  5
+#define PR_SET_UNALIGN	  6
+# define PR_UNALIGN_NOPRINT	1	/* silently fix up unaligned user accesses */
+# define PR_UNALIGN_SIGBUS	2	/* generate SIGBUS on unaligned user access */
+
+/* Get/set whether or not to drop capabilities on setuid() away from
+ * uid 0 (as per security/commoncap.c) */
+#define PR_GET_KEEPCAPS   7
+#define PR_SET_KEEPCAPS   8
+
+/* Get/set floating-point emulation control bits (if meaningful) */
+#define PR_GET_FPEMU  9
+#define PR_SET_FPEMU 10
+# define PR_FPEMU_NOPRINT	1	/* silently emulate fp operations accesses */
+# define PR_FPEMU_SIGFPE	2	/* don't emulate fp operations, send SIGFPE instead */
+
+/* Get/set floating-point exception mode (if meaningful) */
+#define PR_GET_FPEXC	11
+#define PR_SET_FPEXC	12
+# define PR_FP_EXC_SW_ENABLE	0x80	/* Use FPEXC for FP exception enables */
+# define PR_FP_EXC_DIV		0x010000	/* floating point divide by zero */
+# define PR_FP_EXC_OVF		0x020000	/* floating point overflow */
+# define PR_FP_EXC_UND		0x040000	/* floating point underflow */
+# define PR_FP_EXC_RES		0x080000	/* floating point inexact result */
+# define PR_FP_EXC_INV		0x100000	/* floating point invalid operation */
+# define PR_FP_EXC_DISABLED	0	/* FP exceptions disabled */
+# define PR_FP_EXC_NONRECOV	1	/* async non-recoverable exc. mode */
+# define PR_FP_EXC_ASYNC	2	/* async recoverable exception mode */
+# define PR_FP_EXC_PRECISE	3	/* precise exception mode */
+
+/* Get/set whether we use statistical process timing or accurate timestamp
+ * based process timing */
+#define PR_GET_TIMING   13
+#define PR_SET_TIMING   14
+# define PR_TIMING_STATISTICAL  0       /* Normal, traditional,
+                                                   statistical process timing */
+# define PR_TIMING_TIMESTAMP    1       /* Accurate timestamp based
+                                                   process timing */
+
+#define PR_SET_NAME    15		/* Set process name */
+#define PR_GET_NAME    16		/* Get process name */
+
+/* Get/set process endian */
+#define PR_GET_ENDIAN	19
+#define PR_SET_ENDIAN	20
+# define PR_ENDIAN_BIG		0
+# define PR_ENDIAN_LITTLE	1	/* True little endian mode */
+# define PR_ENDIAN_PPC_LITTLE	2	/* "PowerPC" pseudo little endian */
+
+/* Get/set process seccomp mode */
+#define PR_GET_SECCOMP	21
+#define PR_SET_SECCOMP	22
+
+/* Get/set the capability bounding set (as per security/commoncap.c) */
+#define PR_CAPBSET_READ 23
+#define PR_CAPBSET_DROP 24
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1	/* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2	/* throw a SIGSEGV instead of reading the TSC */
+
+/* Get/set securebits (as per security/commoncap.c) */
+#define PR_GET_SECUREBITS 27
+#define PR_SET_SECUREBITS 28
+
+/*
+ * Get/set the timerslack as used by poll/select/nanosleep
+ * A value of 0 means "use default"
+ */
+#define PR_SET_TIMERSLACK 29
+#define PR_GET_TIMERSLACK 30
+
+#define PR_TASK_PERF_EVENTS_DISABLE		31
+#define PR_TASK_PERF_EVENTS_ENABLE		32
+
+/*
+ * Set early/late kill mode for hwpoison memory corruption.
+ * This influences when the process gets killed on a memory corruption.
+ */
+#define PR_MCE_KILL	33
+# define PR_MCE_KILL_CLEAR   0
+# define PR_MCE_KILL_SET     1
+
+# define PR_MCE_KILL_LATE    0
+# define PR_MCE_KILL_EARLY   1
+# define PR_MCE_KILL_DEFAULT 2
+
+#define PR_MCE_KILL_GET 34
+
+/*
+ * Tune up process memory map specifics.
+ */
+#define PR_SET_MM		35
+# define PR_SET_MM_START_CODE		1
+# define PR_SET_MM_END_CODE		2
+# define PR_SET_MM_START_DATA		3
+# define PR_SET_MM_END_DATA		4
+# define PR_SET_MM_START_STACK		5
+# define PR_SET_MM_START_BRK		6
+# define PR_SET_MM_BRK			7
+# define PR_SET_MM_ARG_START		8
+# define PR_SET_MM_ARG_END		9
+# define PR_SET_MM_ENV_START		10
+# define PR_SET_MM_ENV_END		11
+# define PR_SET_MM_AUXV			12
+# define PR_SET_MM_EXE_FILE		13
+# define PR_SET_MM_MAP			14
+# define PR_SET_MM_MAP_SIZE		15
+
+/*
+ * This structure provides new memory descriptor
+ * map which mostly modifies /proc/pid/stat[m]
+ * output for a task. This mostly done in a
+ * sake of checkpoint/restore functionality.
+ */
+struct prctl_mm_map {
+	__u64	start_code;		/* code section bounds */
+	__u64	end_code;
+	__u64	start_data;		/* data section bounds */
+	__u64	end_data;
+	__u64	start_brk;		/* heap for brk() syscall */
+	__u64	brk;
+	__u64	start_stack;		/* stack starts at */
+	__u64	arg_start;		/* command line arguments bounds */
+	__u64	arg_end;
+	__u64	env_start;		/* environment variables bounds */
+	__u64	env_end;
+	__u64	*auxv;			/* auxiliary vector */
+	__u32	auxv_size;		/* vector size */
+	__u32	exe_fd;			/* /proc/$pid/exe link file */
+};
+
+/*
+ * Set specific pid that is allowed to ptrace the current task.
+ * A value of 0 mean "no process".
+ */
+#define PR_SET_PTRACER 0x59616d61
+# define PR_SET_PTRACER_ANY ((unsigned long)-1)
+
+#define PR_SET_CHILD_SUBREAPER	36
+#define PR_GET_CHILD_SUBREAPER	37
+
+/*
+ * If no_new_privs is set, then operations that grant new privileges (i.e.
+ * execve) will either fail or not grant them.  This affects suid/sgid,
+ * file capabilities, and LSMs.
+ *
+ * Operations that merely manipulate or drop existing privileges (setresuid,
+ * capset, etc.) will still work.  Drop those privileges if you want them gone.
+ *
+ * Changing LSM security domain is considered a new privilege.  So, for example,
+ * asking selinux for a specific new context (e.g. with runcon) will result
+ * in execve returning -EPERM.
+ *
+ * See Documentation/userspace-api/no_new_privs.rst for more details.
+ */
+#define PR_SET_NO_NEW_PRIVS	38
+#define PR_GET_NO_NEW_PRIVS	39
+
+#define PR_GET_TID_ADDRESS	40
+
+#define PR_SET_THP_DISABLE	41
+#define PR_GET_THP_DISABLE	42
+
+/*
+ * Tell the kernel to start/stop helping userspace manage bounds tables.
+ */
+#define PR_MPX_ENABLE_MANAGEMENT  43
+#define PR_MPX_DISABLE_MANAGEMENT 44
+
+#define PR_SET_FP_MODE		45
+#define PR_GET_FP_MODE		46
+# define PR_FP_MODE_FR		(1 << 0)	/* 64b FP registers */
+# define PR_FP_MODE_FRE		(1 << 1)	/* 32b compatibility */
+
+/* Control the ambient capability set */
+#define PR_CAP_AMBIENT			47
+# define PR_CAP_AMBIENT_IS_SET		1
+# define PR_CAP_AMBIENT_RAISE		2
+# define PR_CAP_AMBIENT_LOWER		3
+# define PR_CAP_AMBIENT_CLEAR_ALL	4
+
+/* arm64 Scalable Vector Extension controls */
+/* Flag values must be kept in sync with ptrace NT_ARM_SVE interface */
+#define PR_SVE_SET_VL			50	/* set task vector length */
+# define PR_SVE_SET_VL_ONEXEC		(1 << 18) /* defer effect until exec */
+#define PR_SVE_GET_VL			51	/* get task vector length */
+/* Bits common to PR_SVE_SET_VL and PR_SVE_GET_VL */
+# define PR_SVE_VL_LEN_MASK		0xffff
+# define PR_SVE_VL_INHERIT		(1 << 17) /* inherit across exec */
+
+/* Per task speculation control */
+#define PR_GET_SPECULATION_CTRL		52
+#define PR_SET_SPECULATION_CTRL		53
+/* Speculation control variants */
+# define PR_SPEC_STORE_BYPASS		0
+# define PR_SPEC_INDIRECT_BRANCH	1
+/* Return and control values for PR_SET/GET_SPECULATION_CTRL */
+# define PR_SPEC_NOT_AFFECTED		0
+# define PR_SPEC_PRCTL			(1UL << 0)
+# define PR_SPEC_ENABLE			(1UL << 1)
+# define PR_SPEC_DISABLE		(1UL << 2)
+# define PR_SPEC_FORCE_DISABLE		(1UL << 3)
+
+#endif /* _LINUX_PRCTL_H */
diff --git a/tools/include/uapi/linux/sched.h b/tools/include/uapi/linux/sched.h
new file mode 100644
index 000000000..22627f800
--- /dev/null
+++ b/tools/include/uapi/linux/sched.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_SCHED_H
+#define _UAPI_LINUX_SCHED_H
+
+/*
+ * cloning flags:
+ */
+#define CSIGNAL		0x000000ff	/* signal mask to be sent at exit */
+#define CLONE_VM	0x00000100	/* set if VM shared between processes */
+#define CLONE_FS	0x00000200	/* set if fs info shared between processes */
+#define CLONE_FILES	0x00000400	/* set if open files shared between processes */
+#define CLONE_SIGHAND	0x00000800	/* set if signal handlers and blocked signals shared */
+#define CLONE_PTRACE	0x00002000	/* set if we want to let tracing continue on the child too */
+#define CLONE_VFORK	0x00004000	/* set if the parent wants the child to wake it up on mm_release */
+#define CLONE_PARENT	0x00008000	/* set if we want to have the same parent as the cloner */
+#define CLONE_THREAD	0x00010000	/* Same thread group? */
+#define CLONE_NEWNS	0x00020000	/* New mount namespace group */
+#define CLONE_SYSVSEM	0x00040000	/* share system V SEM_UNDO semantics */
+#define CLONE_SETTLS	0x00080000	/* create a new TLS for the child */
+#define CLONE_PARENT_SETTID	0x00100000	/* set the TID in the parent */
+#define CLONE_CHILD_CLEARTID	0x00200000	/* clear the TID in the child */
+#define CLONE_DETACHED		0x00400000	/* Unused, ignored */
+#define CLONE_UNTRACED		0x00800000	/* set if the tracing process can't force CLONE_PTRACE on this clone */
+#define CLONE_CHILD_SETTID	0x01000000	/* set the TID in the child */
+#define CLONE_NEWCGROUP		0x02000000	/* New cgroup namespace */
+#define CLONE_NEWUTS		0x04000000	/* New utsname namespace */
+#define CLONE_NEWIPC		0x08000000	/* New ipc namespace */
+#define CLONE_NEWUSER		0x10000000	/* New user namespace */
+#define CLONE_NEWPID		0x20000000	/* New pid namespace */
+#define CLONE_NEWNET		0x40000000	/* New network namespace */
+#define CLONE_IO		0x80000000	/* Clone io context */
+
+/*
+ * Scheduling policies
+ */
+#define SCHED_NORMAL		0
+#define SCHED_FIFO		1
+#define SCHED_RR		2
+#define SCHED_BATCH		3
+/* SCHED_ISO: reserved but not implemented yet */
+#define SCHED_IDLE		5
+#define SCHED_DEADLINE		6
+
+/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
+#define SCHED_RESET_ON_FORK     0x40000000
+
+/*
+ * For the sched_{set,get}attr() calls
+ */
+#define SCHED_FLAG_RESET_ON_FORK	0x01
+#define SCHED_FLAG_RECLAIM		0x02
+#define SCHED_FLAG_DL_OVERRUN		0x04
+
+#define SCHED_FLAG_ALL	(SCHED_FLAG_RESET_ON_FORK	| \
+			 SCHED_FLAG_RECLAIM		| \
+			 SCHED_FLAG_DL_OVERRUN)
+
+#endif /* _UAPI_LINUX_SCHED_H */
diff --git a/tools/include/uapi/linux/seg6.h b/tools/include/uapi/linux/seg6.h
new file mode 100644
index 000000000..286e8d6a8
--- /dev/null
+++ b/tools/include/uapi/linux/seg6.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ *  SR-IPv6 implementation
+ *
+ *  Author:
+ *  David Lebrun <david.lebrun@uclouvain.be>
+ *
+ *
+ *  This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_SEG6_H
+#define _UAPI_LINUX_SEG6_H
+
+#include <linux/types.h>
+#include <linux/in6.h>		/* For struct in6_addr. */
+
+/*
+ * SRH
+ */
+struct ipv6_sr_hdr {
+	__u8	nexthdr;
+	__u8	hdrlen;
+	__u8	type;
+	__u8	segments_left;
+	__u8	first_segment; /* Represents the last_entry field of SRH */
+	__u8	flags;
+	__u16	tag;
+
+	struct in6_addr segments[0];
+};
+
+#define SR6_FLAG1_PROTECTED	(1 << 6)
+#define SR6_FLAG1_OAM		(1 << 5)
+#define SR6_FLAG1_ALERT		(1 << 4)
+#define SR6_FLAG1_HMAC		(1 << 3)
+
+#define SR6_TLV_INGRESS		1
+#define SR6_TLV_EGRESS		2
+#define SR6_TLV_OPAQUE		3
+#define SR6_TLV_PADDING		4
+#define SR6_TLV_HMAC		5
+
+#define sr_has_hmac(srh) ((srh)->flags & SR6_FLAG1_HMAC)
+
+struct sr6_tlv {
+	__u8 type;
+	__u8 len;
+	__u8 data[0];
+};
+
+#endif
diff --git a/tools/include/uapi/linux/seg6_local.h b/tools/include/uapi/linux/seg6_local.h
new file mode 100644
index 000000000..edc138bdc
--- /dev/null
+++ b/tools/include/uapi/linux/seg6_local.h
@@ -0,0 +1,80 @@
+/*
+ *  SR-IPv6 implementation
+ *
+ *  Author:
+ *  David Lebrun <david.lebrun@uclouvain.be>
+ *
+ *
+ *  This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_SEG6_LOCAL_H
+#define _UAPI_LINUX_SEG6_LOCAL_H
+
+#include <linux/seg6.h>
+
+enum {
+	SEG6_LOCAL_UNSPEC,
+	SEG6_LOCAL_ACTION,
+	SEG6_LOCAL_SRH,
+	SEG6_LOCAL_TABLE,
+	SEG6_LOCAL_NH4,
+	SEG6_LOCAL_NH6,
+	SEG6_LOCAL_IIF,
+	SEG6_LOCAL_OIF,
+	SEG6_LOCAL_BPF,
+	__SEG6_LOCAL_MAX,
+};
+#define SEG6_LOCAL_MAX (__SEG6_LOCAL_MAX - 1)
+
+enum {
+	SEG6_LOCAL_ACTION_UNSPEC	= 0,
+	/* node segment */
+	SEG6_LOCAL_ACTION_END		= 1,
+	/* adjacency segment (IPv6 cross-connect) */
+	SEG6_LOCAL_ACTION_END_X		= 2,
+	/* lookup of next seg NH in table */
+	SEG6_LOCAL_ACTION_END_T		= 3,
+	/* decap and L2 cross-connect */
+	SEG6_LOCAL_ACTION_END_DX2	= 4,
+	/* decap and IPv6 cross-connect */
+	SEG6_LOCAL_ACTION_END_DX6	= 5,
+	/* decap and IPv4 cross-connect */
+	SEG6_LOCAL_ACTION_END_DX4	= 6,
+	/* decap and lookup of DA in v6 table */
+	SEG6_LOCAL_ACTION_END_DT6	= 7,
+	/* decap and lookup of DA in v4 table */
+	SEG6_LOCAL_ACTION_END_DT4	= 8,
+	/* binding segment with insertion */
+	SEG6_LOCAL_ACTION_END_B6	= 9,
+	/* binding segment with encapsulation */
+	SEG6_LOCAL_ACTION_END_B6_ENCAP	= 10,
+	/* binding segment with MPLS encap */
+	SEG6_LOCAL_ACTION_END_BM	= 11,
+	/* lookup last seg in table */
+	SEG6_LOCAL_ACTION_END_S		= 12,
+	/* forward to SR-unaware VNF with static proxy */
+	SEG6_LOCAL_ACTION_END_AS	= 13,
+	/* forward to SR-unaware VNF with masquerading */
+	SEG6_LOCAL_ACTION_END_AM	= 14,
+	/* custom BPF action */
+	SEG6_LOCAL_ACTION_END_BPF	= 15,
+
+	__SEG6_LOCAL_ACTION_MAX,
+};
+
+#define SEG6_LOCAL_ACTION_MAX (__SEG6_LOCAL_ACTION_MAX - 1)
+
+enum {
+	SEG6_LOCAL_BPF_PROG_UNSPEC,
+	SEG6_LOCAL_BPF_PROG,
+	SEG6_LOCAL_BPF_PROG_NAME,
+	__SEG6_LOCAL_BPF_PROG_MAX,
+};
+
+#define SEG6_LOCAL_BPF_PROG_MAX (__SEG6_LOCAL_BPF_PROG_MAX - 1)
+
+#endif
diff --git a/tools/include/uapi/linux/stat.h b/tools/include/uapi/linux/stat.h
new file mode 100644
index 000000000..7b35e98d3
--- /dev/null
+++ b/tools/include/uapi/linux/stat.h
@@ -0,0 +1,174 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_STAT_H
+#define _UAPI_LINUX_STAT_H
+
+#include <linux/types.h>
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#define S_IFMT  00170000
+#define S_IFSOCK 0140000
+#define S_IFLNK	 0120000
+#define S_IFREG  0100000
+#define S_IFBLK  0060000
+#define S_IFDIR  0040000
+#define S_IFCHR  0020000
+#define S_IFIFO  0010000
+#define S_ISUID  0004000
+#define S_ISGID  0002000
+#define S_ISVTX  0001000
+
+#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
+#define S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
+#define S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
+#define S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
+#define S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
+#define S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
+#define S_ISSOCK(m)	(((m) & S_IFMT) == S_IFSOCK)
+
+#define S_IRWXU 00700
+#define S_IRUSR 00400
+#define S_IWUSR 00200
+#define S_IXUSR 00100
+
+#define S_IRWXG 00070
+#define S_IRGRP 00040
+#define S_IWGRP 00020
+#define S_IXGRP 00010
+
+#define S_IRWXO 00007
+#define S_IROTH 00004
+#define S_IWOTH 00002
+#define S_IXOTH 00001
+
+#endif
+
+/*
+ * Timestamp structure for the timestamps in struct statx.
+ *
+ * tv_sec holds the number of seconds before (negative) or after (positive)
+ * 00:00:00 1st January 1970 UTC.
+ *
+ * tv_nsec holds a number of nanoseconds (0..999,999,999) after the tv_sec time.
+ *
+ * __reserved is held in case we need a yet finer resolution.
+ */
+struct statx_timestamp {
+	__s64	tv_sec;
+	__u32	tv_nsec;
+	__s32	__reserved;
+};
+
+/*
+ * Structures for the extended file attribute retrieval system call
+ * (statx()).
+ *
+ * The caller passes a mask of what they're specifically interested in as a
+ * parameter to statx().  What statx() actually got will be indicated in
+ * st_mask upon return.
+ *
+ * For each bit in the mask argument:
+ *
+ * - if the datum is not supported:
+ *
+ *   - the bit will be cleared, and
+ *
+ *   - the datum will be set to an appropriate fabricated value if one is
+ *     available (eg. CIFS can take a default uid and gid), otherwise
+ *
+ *   - the field will be cleared;
+ *
+ * - otherwise, if explicitly requested:
+ *
+ *   - the datum will be synchronised to the server if AT_STATX_FORCE_SYNC is
+ *     set or if the datum is considered out of date, and
+ *
+ *   - the field will be filled in and the bit will be set;
+ *
+ * - otherwise, if not requested, but available in approximate form without any
+ *   effort, it will be filled in anyway, and the bit will be set upon return
+ *   (it might not be up to date, however, and no attempt will be made to
+ *   synchronise the internal state first);
+ *
+ * - otherwise the field and the bit will be cleared before returning.
+ *
+ * Items in STATX_BASIC_STATS may be marked unavailable on return, but they
+ * will have values installed for compatibility purposes so that stat() and
+ * co. can be emulated in userspace.
+ */
+struct statx {
+	/* 0x00 */
+	__u32	stx_mask;	/* What results were written [uncond] */
+	__u32	stx_blksize;	/* Preferred general I/O size [uncond] */
+	__u64	stx_attributes;	/* Flags conveying information about the file [uncond] */
+	/* 0x10 */
+	__u32	stx_nlink;	/* Number of hard links */
+	__u32	stx_uid;	/* User ID of owner */
+	__u32	stx_gid;	/* Group ID of owner */
+	__u16	stx_mode;	/* File mode */
+	__u16	__spare0[1];
+	/* 0x20 */
+	__u64	stx_ino;	/* Inode number */
+	__u64	stx_size;	/* File size */
+	__u64	stx_blocks;	/* Number of 512-byte blocks allocated */
+	__u64	stx_attributes_mask; /* Mask to show what's supported in stx_attributes */
+	/* 0x40 */
+	struct statx_timestamp	stx_atime;	/* Last access time */
+	struct statx_timestamp	stx_btime;	/* File creation time */
+	struct statx_timestamp	stx_ctime;	/* Last attribute change time */
+	struct statx_timestamp	stx_mtime;	/* Last data modification time */
+	/* 0x80 */
+	__u32	stx_rdev_major;	/* Device ID of special file [if bdev/cdev] */
+	__u32	stx_rdev_minor;
+	__u32	stx_dev_major;	/* ID of device containing file [uncond] */
+	__u32	stx_dev_minor;
+	/* 0x90 */
+	__u64	__spare2[14];	/* Spare space for future expansion */
+	/* 0x100 */
+};
+
+/*
+ * Flags to be stx_mask
+ *
+ * Query request/result mask for statx() and struct statx::stx_mask.
+ *
+ * These bits should be set in the mask argument of statx() to request
+ * particular items when calling statx().
+ */
+#define STATX_TYPE		0x00000001U	/* Want/got stx_mode & S_IFMT */
+#define STATX_MODE		0x00000002U	/* Want/got stx_mode & ~S_IFMT */
+#define STATX_NLINK		0x00000004U	/* Want/got stx_nlink */
+#define STATX_UID		0x00000008U	/* Want/got stx_uid */
+#define STATX_GID		0x00000010U	/* Want/got stx_gid */
+#define STATX_ATIME		0x00000020U	/* Want/got stx_atime */
+#define STATX_MTIME		0x00000040U	/* Want/got stx_mtime */
+#define STATX_CTIME		0x00000080U	/* Want/got stx_ctime */
+#define STATX_INO		0x00000100U	/* Want/got stx_ino */
+#define STATX_SIZE		0x00000200U	/* Want/got stx_size */
+#define STATX_BLOCKS		0x00000400U	/* Want/got stx_blocks */
+#define STATX_BASIC_STATS	0x000007ffU	/* The stuff in the normal stat struct */
+#define STATX_BTIME		0x00000800U	/* Want/got stx_btime */
+#define STATX_ALL		0x00000fffU	/* All currently supported flags */
+#define STATX__RESERVED		0x80000000U	/* Reserved for future struct statx expansion */
+
+/*
+ * Attributes to be found in stx_attributes and masked in stx_attributes_mask.
+ *
+ * These give information about the features or the state of a file that might
+ * be of use to ordinary userspace programs such as GUIs or ls rather than
+ * specialised tools.
+ *
+ * Note that the flags marked [I] correspond to generic FS_IOC_FLAGS
+ * semantically.  Where possible, the numerical value is picked to correspond
+ * also.
+ */
+#define STATX_ATTR_COMPRESSED		0x00000004 /* [I] File is compressed by the fs */
+#define STATX_ATTR_IMMUTABLE		0x00000010 /* [I] File is marked immutable */
+#define STATX_ATTR_APPEND		0x00000020 /* [I] File is append-only */
+#define STATX_ATTR_NODUMP		0x00000040 /* [I] File is not to be dumped */
+#define STATX_ATTR_ENCRYPTED		0x00000800 /* [I] File requires key to decrypt in fs */
+
+#define STATX_ATTR_AUTOMOUNT		0x00001000 /* Dir: Automount trigger */
+
+
+#endif /* _UAPI_LINUX_STAT_H */
diff --git a/tools/include/uapi/linux/vhost.h b/tools/include/uapi/linux/vhost.h
new file mode 100644
index 000000000..84c3de896
--- /dev/null
+++ b/tools/include/uapi/linux/vhost.h
@@ -0,0 +1,228 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_VHOST_H
+#define _LINUX_VHOST_H
+/* Userspace interface for in-kernel virtio accelerators. */
+
+/* vhost is used to reduce the number of system calls involved in virtio.
+ *
+ * Existing virtio net code is used in the guest without modification.
+ *
+ * This header includes interface used by userspace hypervisor for
+ * device configuration.
+ */
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
+
+struct vhost_vring_state {
+	unsigned int index;
+	unsigned int num;
+};
+
+struct vhost_vring_file {
+	unsigned int index;
+	int fd; /* Pass -1 to unbind from file. */
+
+};
+
+struct vhost_vring_addr {
+	unsigned int index;
+	/* Option flags. */
+	unsigned int flags;
+	/* Flag values: */
+	/* Whether log address is valid. If set enables logging. */
+#define VHOST_VRING_F_LOG 0
+
+	/* Start of array of descriptors (virtually contiguous) */
+	__u64 desc_user_addr;
+	/* Used structure address. Must be 32 bit aligned */
+	__u64 used_user_addr;
+	/* Available structure address. Must be 16 bit aligned */
+	__u64 avail_user_addr;
+	/* Logging support. */
+	/* Log writes to used structure, at offset calculated from specified
+	 * address. Address must be 32 bit aligned. */
+	__u64 log_guest_addr;
+};
+
+/* no alignment requirement */
+struct vhost_iotlb_msg {
+	__u64 iova;
+	__u64 size;
+	__u64 uaddr;
+#define VHOST_ACCESS_RO      0x1
+#define VHOST_ACCESS_WO      0x2
+#define VHOST_ACCESS_RW      0x3
+	__u8 perm;
+#define VHOST_IOTLB_MISS           1
+#define VHOST_IOTLB_UPDATE         2
+#define VHOST_IOTLB_INVALIDATE     3
+#define VHOST_IOTLB_ACCESS_FAIL    4
+	__u8 type;
+};
+
+#define VHOST_IOTLB_MSG 0x1
+#define VHOST_IOTLB_MSG_V2 0x2
+
+struct vhost_msg {
+	int type;
+	union {
+		struct vhost_iotlb_msg iotlb;
+		__u8 padding[64];
+	};
+};
+
+struct vhost_msg_v2 {
+	__u32 type;
+	__u32 reserved;
+	union {
+		struct vhost_iotlb_msg iotlb;
+		__u8 padding[64];
+	};
+};
+
+struct vhost_memory_region {
+	__u64 guest_phys_addr;
+	__u64 memory_size; /* bytes */
+	__u64 userspace_addr;
+	__u64 flags_padding; /* No flags are currently specified. */
+};
+
+/* All region addresses and sizes must be 4K aligned. */
+#define VHOST_PAGE_SIZE 0x1000
+
+struct vhost_memory {
+	__u32 nregions;
+	__u32 padding;
+	struct vhost_memory_region regions[0];
+};
+
+/* ioctls */
+
+#define VHOST_VIRTIO 0xAF
+
+/* Features bitmask for forward compatibility.  Transport bits are used for
+ * vhost specific features. */
+#define VHOST_GET_FEATURES	_IOR(VHOST_VIRTIO, 0x00, __u64)
+#define VHOST_SET_FEATURES	_IOW(VHOST_VIRTIO, 0x00, __u64)
+
+/* Set current process as the (exclusive) owner of this file descriptor.  This
+ * must be called before any other vhost command.  Further calls to
+ * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
+#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
+/* Give up ownership, and reset the device to default values.
+ * Allows subsequent call to VHOST_OWNER_SET to succeed. */
+#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
+
+/* Set up/modify memory layout */
+#define VHOST_SET_MEM_TABLE	_IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
+
+/* Write logging setup. */
+/* Memory writes can optionally be logged by setting bit at an offset
+ * (calculated from the physical address) from specified log base.
+ * The bit is set using an atomic 32 bit operation. */
+/* Set base address for logging. */
+#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
+/* Specify an eventfd file descriptor to signal on log write. */
+#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
+
+/* Ring setup. */
+/* Set number of descriptors in ring. This parameter can not
+ * be modified while ring is running (bound to a device). */
+#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
+/* Set addresses for the ring. */
+#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
+/* Base value where queue looks for available descriptors */
+#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+/* Get accessor: reads index, writes value in num */
+#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+
+/* Set the vring byte order in num. Valid values are VHOST_VRING_LITTLE_ENDIAN
+ * or VHOST_VRING_BIG_ENDIAN (other values return -EINVAL).
+ * The byte order cannot be changed while the device is active: trying to do so
+ * returns -EBUSY.
+ * This is a legacy only API that is simply ignored when VIRTIO_F_VERSION_1 is
+ * set.
+ * Not all kernel configurations support this ioctl, but all configurations that
+ * support SET also support GET.
+ */
+#define VHOST_VRING_LITTLE_ENDIAN 0
+#define VHOST_VRING_BIG_ENDIAN 1
+#define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state)
+#define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state)
+
+/* The following ioctls use eventfd file descriptors to signal and poll
+ * for events. */
+
+/* Set eventfd to poll for added buffers */
+#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
+/* Set eventfd to signal when buffers have beed used */
+#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
+/* Set eventfd to signal an error */
+#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
+/* Set busy loop timeout (in us) */
+#define VHOST_SET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x23,	\
+					 struct vhost_vring_state)
+/* Get busy loop timeout (in us) */
+#define VHOST_GET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x24,	\
+					 struct vhost_vring_state)
+
+/* Set or get vhost backend capability */
+
+/* Use message type V2 */
+#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1
+
+#define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
+#define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)
+
+/* VHOST_NET specific defines */
+
+/* Attach virtio net ring to a raw socket, or tap device.
+ * The socket must be already bound to an ethernet device, this device will be
+ * used for transmit.  Pass fd -1 to unbind from the socket and the transmit
+ * device.  This can be used to stop the ring (e.g. for migration). */
+#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
+
+/* Feature bits */
+/* Log all write descriptors. Can be changed while device is active. */
+#define VHOST_F_LOG_ALL 26
+/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
+#define VHOST_NET_F_VIRTIO_NET_HDR 27
+
+/* VHOST_SCSI specific definitions */
+
+/*
+ * Used by QEMU userspace to ensure a consistent vhost-scsi ABI.
+ *
+ * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate +
+ *            RFC-v2 vhost-scsi userspace.  Add GET_ABI_VERSION ioctl usage
+ * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target.
+ *            All the targets under vhost_wwpn can be seen and used by guset.
+ */
+
+#define VHOST_SCSI_ABI_VERSION	1
+
+struct vhost_scsi_target {
+	int abi_version;
+	char vhost_wwpn[224]; /* TRANSPORT_IQN_LEN */
+	unsigned short vhost_tpgt;
+	unsigned short reserved;
+};
+
+#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target)
+#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target)
+/* Changing this breaks userspace. */
+#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int)
+/* Set and get the events missed flag */
+#define VHOST_SCSI_SET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x43, __u32)
+#define VHOST_SCSI_GET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x44, __u32)
+
+/* VHOST_VSOCK specific defines */
+
+#define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
+#define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
+
+#endif
diff --git a/tools/include/uapi/sound/asound.h b/tools/include/uapi/sound/asound.h
new file mode 100644
index 000000000..ed0a120d4
--- /dev/null
+++ b/tools/include/uapi/sound/asound.h
@@ -0,0 +1,1037 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ *  Advanced Linux Sound Architecture - ALSA - Driver
+ *  Copyright (c) 1994-2003 by Jaroslav Kysela <perex@perex.cz>,
+ *                             Abramo Bagnara <abramo@alsa-project.org>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef _UAPI__SOUND_ASOUND_H
+#define _UAPI__SOUND_ASOUND_H
+
+#if defined(__KERNEL__) || defined(__linux__)
+#include <linux/types.h>
+#else
+#include <sys/ioctl.h>
+#endif
+
+#ifndef __KERNEL__
+#include <stdlib.h>
+#endif
+
+/*
+ *  protocol version
+ */
+
+#define SNDRV_PROTOCOL_VERSION(major, minor, subminor) (((major)<<16)|((minor)<<8)|(subminor))
+#define SNDRV_PROTOCOL_MAJOR(version) (((version)>>16)&0xffff)
+#define SNDRV_PROTOCOL_MINOR(version) (((version)>>8)&0xff)
+#define SNDRV_PROTOCOL_MICRO(version) ((version)&0xff)
+#define SNDRV_PROTOCOL_INCOMPATIBLE(kversion, uversion) \
+	(SNDRV_PROTOCOL_MAJOR(kversion) != SNDRV_PROTOCOL_MAJOR(uversion) || \
+	 (SNDRV_PROTOCOL_MAJOR(kversion) == SNDRV_PROTOCOL_MAJOR(uversion) && \
+	   SNDRV_PROTOCOL_MINOR(kversion) != SNDRV_PROTOCOL_MINOR(uversion)))
+
+/****************************************************************************
+ *                                                                          *
+ *        Digital audio interface					    *
+ *                                                                          *
+ ****************************************************************************/
+
+struct snd_aes_iec958 {
+	unsigned char status[24];	/* AES/IEC958 channel status bits */
+	unsigned char subcode[147];	/* AES/IEC958 subcode bits */
+	unsigned char pad;		/* nothing */
+	unsigned char dig_subframe[4];	/* AES/IEC958 subframe bits */
+};
+
+/****************************************************************************
+ *                                                                          *
+ *        CEA-861 Audio InfoFrame. Used in HDMI and DisplayPort		    *
+ *                                                                          *
+ ****************************************************************************/
+
+struct snd_cea_861_aud_if {
+	unsigned char db1_ct_cc; /* coding type and channel count */
+	unsigned char db2_sf_ss; /* sample frequency and size */
+	unsigned char db3; /* not used, all zeros */
+	unsigned char db4_ca; /* channel allocation code */
+	unsigned char db5_dminh_lsv; /* downmix inhibit & level-shit values */
+};
+
+/****************************************************************************
+ *                                                                          *
+ *      Section for driver hardware dependent interface - /dev/snd/hw?      *
+ *                                                                          *
+ ****************************************************************************/
+
+#define SNDRV_HWDEP_VERSION		SNDRV_PROTOCOL_VERSION(1, 0, 1)
+
+enum {
+	SNDRV_HWDEP_IFACE_OPL2 = 0,
+	SNDRV_HWDEP_IFACE_OPL3,
+	SNDRV_HWDEP_IFACE_OPL4,
+	SNDRV_HWDEP_IFACE_SB16CSP,	/* Creative Signal Processor */
+	SNDRV_HWDEP_IFACE_EMU10K1,	/* FX8010 processor in EMU10K1 chip */
+	SNDRV_HWDEP_IFACE_YSS225,	/* Yamaha FX processor */
+	SNDRV_HWDEP_IFACE_ICS2115,	/* Wavetable synth */
+	SNDRV_HWDEP_IFACE_SSCAPE,	/* Ensoniq SoundScape ISA card (MC68EC000) */
+	SNDRV_HWDEP_IFACE_VX,		/* Digigram VX cards */
+	SNDRV_HWDEP_IFACE_MIXART,	/* Digigram miXart cards */
+	SNDRV_HWDEP_IFACE_USX2Y,	/* Tascam US122, US224 & US428 usb */
+	SNDRV_HWDEP_IFACE_EMUX_WAVETABLE, /* EmuX wavetable */
+	SNDRV_HWDEP_IFACE_BLUETOOTH,	/* Bluetooth audio */
+	SNDRV_HWDEP_IFACE_USX2Y_PCM,	/* Tascam US122, US224 & US428 rawusb pcm */
+	SNDRV_HWDEP_IFACE_PCXHR,	/* Digigram PCXHR */
+	SNDRV_HWDEP_IFACE_SB_RC,	/* SB Extigy/Audigy2NX remote control */
+	SNDRV_HWDEP_IFACE_HDA,		/* HD-audio */
+	SNDRV_HWDEP_IFACE_USB_STREAM,	/* direct access to usb stream */
+	SNDRV_HWDEP_IFACE_FW_DICE,	/* TC DICE FireWire device */
+	SNDRV_HWDEP_IFACE_FW_FIREWORKS,	/* Echo Audio Fireworks based device */
+	SNDRV_HWDEP_IFACE_FW_BEBOB,	/* BridgeCo BeBoB based device */
+	SNDRV_HWDEP_IFACE_FW_OXFW,	/* Oxford OXFW970/971 based device */
+	SNDRV_HWDEP_IFACE_FW_DIGI00X,	/* Digidesign Digi 002/003 family */
+	SNDRV_HWDEP_IFACE_FW_TASCAM,	/* TASCAM FireWire series */
+	SNDRV_HWDEP_IFACE_LINE6,	/* Line6 USB processors */
+	SNDRV_HWDEP_IFACE_FW_MOTU,	/* MOTU FireWire series */
+	SNDRV_HWDEP_IFACE_FW_FIREFACE,	/* RME Fireface series */
+
+	/* Don't forget to change the following: */
+	SNDRV_HWDEP_IFACE_LAST = SNDRV_HWDEP_IFACE_FW_FIREFACE
+};
+
+struct snd_hwdep_info {
+	unsigned int device;		/* WR: device number */
+	int card;			/* R: card number */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* hwdep name */
+	int iface;			/* hwdep interface */
+	unsigned char reserved[64];	/* reserved for future */
+};
+
+/* generic DSP loader */
+struct snd_hwdep_dsp_status {
+	unsigned int version;		/* R: driver-specific version */
+	unsigned char id[32];		/* R: driver-specific ID string */
+	unsigned int num_dsps;		/* R: number of DSP images to transfer */
+	unsigned int dsp_loaded;	/* R: bit flags indicating the loaded DSPs */
+	unsigned int chip_ready;	/* R: 1 = initialization finished */
+	unsigned char reserved[16];	/* reserved for future use */
+};
+
+struct snd_hwdep_dsp_image {
+	unsigned int index;		/* W: DSP index */
+	unsigned char name[64];		/* W: ID (e.g. file name) */
+	unsigned char __user *image;	/* W: binary image */
+	size_t length;			/* W: size of image in bytes */
+	unsigned long driver_data;	/* W: driver-specific data */
+};
+
+#define SNDRV_HWDEP_IOCTL_PVERSION	_IOR ('H', 0x00, int)
+#define SNDRV_HWDEP_IOCTL_INFO		_IOR ('H', 0x01, struct snd_hwdep_info)
+#define SNDRV_HWDEP_IOCTL_DSP_STATUS	_IOR('H', 0x02, struct snd_hwdep_dsp_status)
+#define SNDRV_HWDEP_IOCTL_DSP_LOAD	_IOW('H', 0x03, struct snd_hwdep_dsp_image)
+
+/*****************************************************************************
+ *                                                                           *
+ *             Digital Audio (PCM) interface - /dev/snd/pcm??                *
+ *                                                                           *
+ *****************************************************************************/
+
+#define SNDRV_PCM_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 14)
+
+typedef unsigned long snd_pcm_uframes_t;
+typedef signed long snd_pcm_sframes_t;
+
+enum {
+	SNDRV_PCM_CLASS_GENERIC = 0,	/* standard mono or stereo device */
+	SNDRV_PCM_CLASS_MULTI,		/* multichannel device */
+	SNDRV_PCM_CLASS_MODEM,		/* software modem class */
+	SNDRV_PCM_CLASS_DIGITIZER,	/* digitizer class */
+	/* Don't forget to change the following: */
+	SNDRV_PCM_CLASS_LAST = SNDRV_PCM_CLASS_DIGITIZER,
+};
+
+enum {
+	SNDRV_PCM_SUBCLASS_GENERIC_MIX = 0, /* mono or stereo subdevices are mixed together */
+	SNDRV_PCM_SUBCLASS_MULTI_MIX,	/* multichannel subdevices are mixed together */
+	/* Don't forget to change the following: */
+	SNDRV_PCM_SUBCLASS_LAST = SNDRV_PCM_SUBCLASS_MULTI_MIX,
+};
+
+enum {
+	SNDRV_PCM_STREAM_PLAYBACK = 0,
+	SNDRV_PCM_STREAM_CAPTURE,
+	SNDRV_PCM_STREAM_LAST = SNDRV_PCM_STREAM_CAPTURE,
+};
+
+typedef int __bitwise snd_pcm_access_t;
+#define	SNDRV_PCM_ACCESS_MMAP_INTERLEAVED	((__force snd_pcm_access_t) 0) /* interleaved mmap */
+#define	SNDRV_PCM_ACCESS_MMAP_NONINTERLEAVED	((__force snd_pcm_access_t) 1) /* noninterleaved mmap */
+#define	SNDRV_PCM_ACCESS_MMAP_COMPLEX		((__force snd_pcm_access_t) 2) /* complex mmap */
+#define	SNDRV_PCM_ACCESS_RW_INTERLEAVED		((__force snd_pcm_access_t) 3) /* readi/writei */
+#define	SNDRV_PCM_ACCESS_RW_NONINTERLEAVED	((__force snd_pcm_access_t) 4) /* readn/writen */
+#define	SNDRV_PCM_ACCESS_LAST		SNDRV_PCM_ACCESS_RW_NONINTERLEAVED
+
+typedef int __bitwise snd_pcm_format_t;
+#define	SNDRV_PCM_FORMAT_S8	((__force snd_pcm_format_t) 0)
+#define	SNDRV_PCM_FORMAT_U8	((__force snd_pcm_format_t) 1)
+#define	SNDRV_PCM_FORMAT_S16_LE	((__force snd_pcm_format_t) 2)
+#define	SNDRV_PCM_FORMAT_S16_BE	((__force snd_pcm_format_t) 3)
+#define	SNDRV_PCM_FORMAT_U16_LE	((__force snd_pcm_format_t) 4)
+#define	SNDRV_PCM_FORMAT_U16_BE	((__force snd_pcm_format_t) 5)
+#define	SNDRV_PCM_FORMAT_S24_LE	((__force snd_pcm_format_t) 6) /* low three bytes */
+#define	SNDRV_PCM_FORMAT_S24_BE	((__force snd_pcm_format_t) 7) /* low three bytes */
+#define	SNDRV_PCM_FORMAT_U24_LE	((__force snd_pcm_format_t) 8) /* low three bytes */
+#define	SNDRV_PCM_FORMAT_U24_BE	((__force snd_pcm_format_t) 9) /* low three bytes */
+#define	SNDRV_PCM_FORMAT_S32_LE	((__force snd_pcm_format_t) 10)
+#define	SNDRV_PCM_FORMAT_S32_BE	((__force snd_pcm_format_t) 11)
+#define	SNDRV_PCM_FORMAT_U32_LE	((__force snd_pcm_format_t) 12)
+#define	SNDRV_PCM_FORMAT_U32_BE	((__force snd_pcm_format_t) 13)
+#define	SNDRV_PCM_FORMAT_FLOAT_LE	((__force snd_pcm_format_t) 14) /* 4-byte float, IEEE-754 32-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_FLOAT_BE	((__force snd_pcm_format_t) 15) /* 4-byte float, IEEE-754 32-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_FLOAT64_LE	((__force snd_pcm_format_t) 16) /* 8-byte float, IEEE-754 64-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_FLOAT64_BE	((__force snd_pcm_format_t) 17) /* 8-byte float, IEEE-754 64-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE ((__force snd_pcm_format_t) 18) /* IEC-958 subframe, Little Endian */
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE ((__force snd_pcm_format_t) 19) /* IEC-958 subframe, Big Endian */
+#define	SNDRV_PCM_FORMAT_MU_LAW		((__force snd_pcm_format_t) 20)
+#define	SNDRV_PCM_FORMAT_A_LAW		((__force snd_pcm_format_t) 21)
+#define	SNDRV_PCM_FORMAT_IMA_ADPCM	((__force snd_pcm_format_t) 22)
+#define	SNDRV_PCM_FORMAT_MPEG		((__force snd_pcm_format_t) 23)
+#define	SNDRV_PCM_FORMAT_GSM		((__force snd_pcm_format_t) 24)
+#define	SNDRV_PCM_FORMAT_S20_LE	((__force snd_pcm_format_t) 25) /* in four bytes, LSB justified */
+#define	SNDRV_PCM_FORMAT_S20_BE	((__force snd_pcm_format_t) 26) /* in four bytes, LSB justified */
+#define	SNDRV_PCM_FORMAT_U20_LE	((__force snd_pcm_format_t) 27) /* in four bytes, LSB justified */
+#define	SNDRV_PCM_FORMAT_U20_BE	((__force snd_pcm_format_t) 28) /* in four bytes, LSB justified */
+/* gap in the numbering for a future standard linear format */
+#define	SNDRV_PCM_FORMAT_SPECIAL	((__force snd_pcm_format_t) 31)
+#define	SNDRV_PCM_FORMAT_S24_3LE	((__force snd_pcm_format_t) 32)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S24_3BE	((__force snd_pcm_format_t) 33)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U24_3LE	((__force snd_pcm_format_t) 34)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U24_3BE	((__force snd_pcm_format_t) 35)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S20_3LE	((__force snd_pcm_format_t) 36)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S20_3BE	((__force snd_pcm_format_t) 37)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U20_3LE	((__force snd_pcm_format_t) 38)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U20_3BE	((__force snd_pcm_format_t) 39)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S18_3LE	((__force snd_pcm_format_t) 40)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S18_3BE	((__force snd_pcm_format_t) 41)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U18_3LE	((__force snd_pcm_format_t) 42)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U18_3BE	((__force snd_pcm_format_t) 43)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_G723_24	((__force snd_pcm_format_t) 44) /* 8 samples in 3 bytes */
+#define	SNDRV_PCM_FORMAT_G723_24_1B	((__force snd_pcm_format_t) 45) /* 1 sample in 1 byte */
+#define	SNDRV_PCM_FORMAT_G723_40	((__force snd_pcm_format_t) 46) /* 8 Samples in 5 bytes */
+#define	SNDRV_PCM_FORMAT_G723_40_1B	((__force snd_pcm_format_t) 47) /* 1 sample in 1 byte */
+#define	SNDRV_PCM_FORMAT_DSD_U8		((__force snd_pcm_format_t) 48) /* DSD, 1-byte samples DSD (x8) */
+#define	SNDRV_PCM_FORMAT_DSD_U16_LE	((__force snd_pcm_format_t) 49) /* DSD, 2-byte samples DSD (x16), little endian */
+#define	SNDRV_PCM_FORMAT_DSD_U32_LE	((__force snd_pcm_format_t) 50) /* DSD, 4-byte samples DSD (x32), little endian */
+#define	SNDRV_PCM_FORMAT_DSD_U16_BE	((__force snd_pcm_format_t) 51) /* DSD, 2-byte samples DSD (x16), big endian */
+#define	SNDRV_PCM_FORMAT_DSD_U32_BE	((__force snd_pcm_format_t) 52) /* DSD, 4-byte samples DSD (x32), big endian */
+#define	SNDRV_PCM_FORMAT_LAST		SNDRV_PCM_FORMAT_DSD_U32_BE
+#define	SNDRV_PCM_FORMAT_FIRST		SNDRV_PCM_FORMAT_S8
+
+#ifdef SNDRV_LITTLE_ENDIAN
+#define	SNDRV_PCM_FORMAT_S16		SNDRV_PCM_FORMAT_S16_LE
+#define	SNDRV_PCM_FORMAT_U16		SNDRV_PCM_FORMAT_U16_LE
+#define	SNDRV_PCM_FORMAT_S24		SNDRV_PCM_FORMAT_S24_LE
+#define	SNDRV_PCM_FORMAT_U24		SNDRV_PCM_FORMAT_U24_LE
+#define	SNDRV_PCM_FORMAT_S32		SNDRV_PCM_FORMAT_S32_LE
+#define	SNDRV_PCM_FORMAT_U32		SNDRV_PCM_FORMAT_U32_LE
+#define	SNDRV_PCM_FORMAT_FLOAT		SNDRV_PCM_FORMAT_FLOAT_LE
+#define	SNDRV_PCM_FORMAT_FLOAT64	SNDRV_PCM_FORMAT_FLOAT64_LE
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE
+#define	SNDRV_PCM_FORMAT_S20		SNDRV_PCM_FORMAT_S20_LE
+#define	SNDRV_PCM_FORMAT_U20		SNDRV_PCM_FORMAT_U20_LE
+#endif
+#ifdef SNDRV_BIG_ENDIAN
+#define	SNDRV_PCM_FORMAT_S16		SNDRV_PCM_FORMAT_S16_BE
+#define	SNDRV_PCM_FORMAT_U16		SNDRV_PCM_FORMAT_U16_BE
+#define	SNDRV_PCM_FORMAT_S24		SNDRV_PCM_FORMAT_S24_BE
+#define	SNDRV_PCM_FORMAT_U24		SNDRV_PCM_FORMAT_U24_BE
+#define	SNDRV_PCM_FORMAT_S32		SNDRV_PCM_FORMAT_S32_BE
+#define	SNDRV_PCM_FORMAT_U32		SNDRV_PCM_FORMAT_U32_BE
+#define	SNDRV_PCM_FORMAT_FLOAT		SNDRV_PCM_FORMAT_FLOAT_BE
+#define	SNDRV_PCM_FORMAT_FLOAT64	SNDRV_PCM_FORMAT_FLOAT64_BE
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE
+#define	SNDRV_PCM_FORMAT_S20		SNDRV_PCM_FORMAT_S20_BE
+#define	SNDRV_PCM_FORMAT_U20		SNDRV_PCM_FORMAT_U20_BE
+#endif
+
+typedef int __bitwise snd_pcm_subformat_t;
+#define	SNDRV_PCM_SUBFORMAT_STD		((__force snd_pcm_subformat_t) 0)
+#define	SNDRV_PCM_SUBFORMAT_LAST	SNDRV_PCM_SUBFORMAT_STD
+
+#define SNDRV_PCM_INFO_MMAP		0x00000001	/* hardware supports mmap */
+#define SNDRV_PCM_INFO_MMAP_VALID	0x00000002	/* period data are valid during transfer */
+#define SNDRV_PCM_INFO_DOUBLE		0x00000004	/* Double buffering needed for PCM start/stop */
+#define SNDRV_PCM_INFO_BATCH		0x00000010	/* double buffering */
+#define SNDRV_PCM_INFO_SYNC_APPLPTR	0x00000020	/* need the explicit sync of appl_ptr update */
+#define SNDRV_PCM_INFO_INTERLEAVED	0x00000100	/* channels are interleaved */
+#define SNDRV_PCM_INFO_NONINTERLEAVED	0x00000200	/* channels are not interleaved */
+#define SNDRV_PCM_INFO_COMPLEX		0x00000400	/* complex frame organization (mmap only) */
+#define SNDRV_PCM_INFO_BLOCK_TRANSFER	0x00010000	/* hardware transfer block of samples */
+#define SNDRV_PCM_INFO_OVERRANGE	0x00020000	/* hardware supports ADC (capture) overrange detection */
+#define SNDRV_PCM_INFO_RESUME		0x00040000	/* hardware supports stream resume after suspend */
+#define SNDRV_PCM_INFO_PAUSE		0x00080000	/* pause ioctl is supported */
+#define SNDRV_PCM_INFO_HALF_DUPLEX	0x00100000	/* only half duplex */
+#define SNDRV_PCM_INFO_JOINT_DUPLEX	0x00200000	/* playback and capture stream are somewhat correlated */
+#define SNDRV_PCM_INFO_SYNC_START	0x00400000	/* pcm support some kind of sync go */
+#define SNDRV_PCM_INFO_NO_PERIOD_WAKEUP	0x00800000	/* period wakeup can be disabled */
+#define SNDRV_PCM_INFO_HAS_WALL_CLOCK   0x01000000      /* (Deprecated)has audio wall clock for audio/system time sync */
+#define SNDRV_PCM_INFO_HAS_LINK_ATIME              0x01000000  /* report hardware link audio time, reset on startup */
+#define SNDRV_PCM_INFO_HAS_LINK_ABSOLUTE_ATIME     0x02000000  /* report absolute hardware link audio time, not reset on startup */
+#define SNDRV_PCM_INFO_HAS_LINK_ESTIMATED_ATIME    0x04000000  /* report estimated link audio time */
+#define SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME 0x08000000  /* report synchronized audio/system time */
+
+#define SNDRV_PCM_INFO_DRAIN_TRIGGER	0x40000000		/* internal kernel flag - trigger in drain */
+#define SNDRV_PCM_INFO_FIFO_IN_FRAMES	0x80000000	/* internal kernel flag - FIFO size is in frames */
+
+
+
+typedef int __bitwise snd_pcm_state_t;
+#define	SNDRV_PCM_STATE_OPEN		((__force snd_pcm_state_t) 0) /* stream is open */
+#define	SNDRV_PCM_STATE_SETUP		((__force snd_pcm_state_t) 1) /* stream has a setup */
+#define	SNDRV_PCM_STATE_PREPARED	((__force snd_pcm_state_t) 2) /* stream is ready to start */
+#define	SNDRV_PCM_STATE_RUNNING		((__force snd_pcm_state_t) 3) /* stream is running */
+#define	SNDRV_PCM_STATE_XRUN		((__force snd_pcm_state_t) 4) /* stream reached an xrun */
+#define	SNDRV_PCM_STATE_DRAINING	((__force snd_pcm_state_t) 5) /* stream is draining */
+#define	SNDRV_PCM_STATE_PAUSED		((__force snd_pcm_state_t) 6) /* stream is paused */
+#define	SNDRV_PCM_STATE_SUSPENDED	((__force snd_pcm_state_t) 7) /* hardware is suspended */
+#define	SNDRV_PCM_STATE_DISCONNECTED	((__force snd_pcm_state_t) 8) /* hardware is disconnected */
+#define	SNDRV_PCM_STATE_LAST		SNDRV_PCM_STATE_DISCONNECTED
+
+enum {
+	SNDRV_PCM_MMAP_OFFSET_DATA = 0x00000000,
+	SNDRV_PCM_MMAP_OFFSET_STATUS = 0x80000000,
+	SNDRV_PCM_MMAP_OFFSET_CONTROL = 0x81000000,
+};
+
+union snd_pcm_sync_id {
+	unsigned char id[16];
+	unsigned short id16[8];
+	unsigned int id32[4];
+};
+
+struct snd_pcm_info {
+	unsigned int device;		/* RO/WR (control): device number */
+	unsigned int subdevice;		/* RO/WR (control): subdevice number */
+	int stream;			/* RO/WR (control): stream direction */
+	int card;			/* R: card number */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* name of this device */
+	unsigned char subname[32];	/* subdevice name */
+	int dev_class;			/* SNDRV_PCM_CLASS_* */
+	int dev_subclass;		/* SNDRV_PCM_SUBCLASS_* */
+	unsigned int subdevices_count;
+	unsigned int subdevices_avail;
+	union snd_pcm_sync_id sync;	/* hardware synchronization ID */
+	unsigned char reserved[64];	/* reserved for future... */
+};
+
+typedef int snd_pcm_hw_param_t;
+#define	SNDRV_PCM_HW_PARAM_ACCESS	0	/* Access type */
+#define	SNDRV_PCM_HW_PARAM_FORMAT	1	/* Format */
+#define	SNDRV_PCM_HW_PARAM_SUBFORMAT	2	/* Subformat */
+#define	SNDRV_PCM_HW_PARAM_FIRST_MASK	SNDRV_PCM_HW_PARAM_ACCESS
+#define	SNDRV_PCM_HW_PARAM_LAST_MASK	SNDRV_PCM_HW_PARAM_SUBFORMAT
+
+#define	SNDRV_PCM_HW_PARAM_SAMPLE_BITS	8	/* Bits per sample */
+#define	SNDRV_PCM_HW_PARAM_FRAME_BITS	9	/* Bits per frame */
+#define	SNDRV_PCM_HW_PARAM_CHANNELS	10	/* Channels */
+#define	SNDRV_PCM_HW_PARAM_RATE		11	/* Approx rate */
+#define	SNDRV_PCM_HW_PARAM_PERIOD_TIME	12	/* Approx distance between
+						 * interrupts in us
+						 */
+#define	SNDRV_PCM_HW_PARAM_PERIOD_SIZE	13	/* Approx frames between
+						 * interrupts
+						 */
+#define	SNDRV_PCM_HW_PARAM_PERIOD_BYTES	14	/* Approx bytes between
+						 * interrupts
+						 */
+#define	SNDRV_PCM_HW_PARAM_PERIODS	15	/* Approx interrupts per
+						 * buffer
+						 */
+#define	SNDRV_PCM_HW_PARAM_BUFFER_TIME	16	/* Approx duration of buffer
+						 * in us
+						 */
+#define	SNDRV_PCM_HW_PARAM_BUFFER_SIZE	17	/* Size of buffer in frames */
+#define	SNDRV_PCM_HW_PARAM_BUFFER_BYTES	18	/* Size of buffer in bytes */
+#define	SNDRV_PCM_HW_PARAM_TICK_TIME	19	/* Approx tick duration in us */
+#define	SNDRV_PCM_HW_PARAM_FIRST_INTERVAL	SNDRV_PCM_HW_PARAM_SAMPLE_BITS
+#define	SNDRV_PCM_HW_PARAM_LAST_INTERVAL	SNDRV_PCM_HW_PARAM_TICK_TIME
+
+#define SNDRV_PCM_HW_PARAMS_NORESAMPLE	(1<<0)	/* avoid rate resampling */
+#define SNDRV_PCM_HW_PARAMS_EXPORT_BUFFER	(1<<1)	/* export buffer */
+#define SNDRV_PCM_HW_PARAMS_NO_PERIOD_WAKEUP	(1<<2)	/* disable period wakeups */
+
+struct snd_interval {
+	unsigned int min, max;
+	unsigned int openmin:1,
+		     openmax:1,
+		     integer:1,
+		     empty:1;
+};
+
+#define SNDRV_MASK_MAX	256
+
+struct snd_mask {
+	__u32 bits[(SNDRV_MASK_MAX+31)/32];
+};
+
+struct snd_pcm_hw_params {
+	unsigned int flags;
+	struct snd_mask masks[SNDRV_PCM_HW_PARAM_LAST_MASK -
+			       SNDRV_PCM_HW_PARAM_FIRST_MASK + 1];
+	struct snd_mask mres[5];	/* reserved masks */
+	struct snd_interval intervals[SNDRV_PCM_HW_PARAM_LAST_INTERVAL -
+				        SNDRV_PCM_HW_PARAM_FIRST_INTERVAL + 1];
+	struct snd_interval ires[9];	/* reserved intervals */
+	unsigned int rmask;		/* W: requested masks */
+	unsigned int cmask;		/* R: changed masks */
+	unsigned int info;		/* R: Info flags for returned setup */
+	unsigned int msbits;		/* R: used most significant bits */
+	unsigned int rate_num;		/* R: rate numerator */
+	unsigned int rate_den;		/* R: rate denominator */
+	snd_pcm_uframes_t fifo_size;	/* R: chip FIFO size in frames */
+	unsigned char reserved[64];	/* reserved for future */
+};
+
+enum {
+	SNDRV_PCM_TSTAMP_NONE = 0,
+	SNDRV_PCM_TSTAMP_ENABLE,
+	SNDRV_PCM_TSTAMP_LAST = SNDRV_PCM_TSTAMP_ENABLE,
+};
+
+struct snd_pcm_sw_params {
+	int tstamp_mode;			/* timestamp mode */
+	unsigned int period_step;
+	unsigned int sleep_min;			/* min ticks to sleep */
+	snd_pcm_uframes_t avail_min;		/* min avail frames for wakeup */
+	snd_pcm_uframes_t xfer_align;		/* obsolete: xfer size need to be a multiple */
+	snd_pcm_uframes_t start_threshold;	/* min hw_avail frames for automatic start */
+	snd_pcm_uframes_t stop_threshold;	/* min avail frames for automatic stop */
+	snd_pcm_uframes_t silence_threshold;	/* min distance from noise for silence filling */
+	snd_pcm_uframes_t silence_size;		/* silence block size */
+	snd_pcm_uframes_t boundary;		/* pointers wrap point */
+	unsigned int proto;			/* protocol version */
+	unsigned int tstamp_type;		/* timestamp type (req. proto >= 2.0.12) */
+	unsigned char reserved[56];		/* reserved for future */
+};
+
+struct snd_pcm_channel_info {
+	unsigned int channel;
+	__kernel_off_t offset;		/* mmap offset */
+	unsigned int first;		/* offset to first sample in bits */
+	unsigned int step;		/* samples distance in bits */
+};
+
+enum {
+	/*
+	 *  first definition for backwards compatibility only,
+	 *  maps to wallclock/link time for HDAudio playback and DEFAULT/DMA time for everything else
+	 */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_COMPAT = 0,
+
+	/* timestamp definitions */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_DEFAULT = 1,           /* DMA time, reported as per hw_ptr */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_LINK = 2,	           /* link time reported by sample or wallclock counter, reset on startup */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_LINK_ABSOLUTE = 3,	   /* link time reported by sample or wallclock counter, not reset on startup */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_LINK_ESTIMATED = 4,    /* link time estimated indirectly */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_LINK_SYNCHRONIZED = 5, /* link time synchronized with system time */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_LAST = SNDRV_PCM_AUDIO_TSTAMP_TYPE_LINK_SYNCHRONIZED
+};
+
+struct snd_pcm_status {
+	snd_pcm_state_t state;		/* stream state */
+	struct timespec trigger_tstamp;	/* time when stream was started/stopped/paused */
+	struct timespec tstamp;		/* reference timestamp */
+	snd_pcm_uframes_t appl_ptr;	/* appl ptr */
+	snd_pcm_uframes_t hw_ptr;	/* hw ptr */
+	snd_pcm_sframes_t delay;	/* current delay in frames */
+	snd_pcm_uframes_t avail;	/* number of frames available */
+	snd_pcm_uframes_t avail_max;	/* max frames available on hw since last status */
+	snd_pcm_uframes_t overrange;	/* count of ADC (capture) overrange detections from last status */
+	snd_pcm_state_t suspended_state; /* suspended stream state */
+	__u32 audio_tstamp_data;	 /* needed for 64-bit alignment, used for configs/report to/from userspace */
+	struct timespec audio_tstamp;	/* sample counter, wall clock, PHC or on-demand sync'ed */
+	struct timespec driver_tstamp;	/* useful in case reference system tstamp is reported with delay */
+	__u32 audio_tstamp_accuracy;	/* in ns units, only valid if indicated in audio_tstamp_data */
+	unsigned char reserved[52-2*sizeof(struct timespec)]; /* must be filled with zero */
+};
+
+struct snd_pcm_mmap_status {
+	snd_pcm_state_t state;		/* RO: state - SNDRV_PCM_STATE_XXXX */
+	int pad1;			/* Needed for 64 bit alignment */
+	snd_pcm_uframes_t hw_ptr;	/* RO: hw ptr (0...boundary-1) */
+	struct timespec tstamp;		/* Timestamp */
+	snd_pcm_state_t suspended_state; /* RO: suspended stream state */
+	struct timespec audio_tstamp;	/* from sample counter or wall clock */
+};
+
+struct snd_pcm_mmap_control {
+	snd_pcm_uframes_t appl_ptr;	/* RW: appl ptr (0...boundary-1) */
+	snd_pcm_uframes_t avail_min;	/* RW: min available frames for wakeup */
+};
+
+#define SNDRV_PCM_SYNC_PTR_HWSYNC	(1<<0)	/* execute hwsync */
+#define SNDRV_PCM_SYNC_PTR_APPL		(1<<1)	/* get appl_ptr from driver (r/w op) */
+#define SNDRV_PCM_SYNC_PTR_AVAIL_MIN	(1<<2)	/* get avail_min from driver */
+
+struct snd_pcm_sync_ptr {
+	unsigned int flags;
+	union {
+		struct snd_pcm_mmap_status status;
+		unsigned char reserved[64];
+	} s;
+	union {
+		struct snd_pcm_mmap_control control;
+		unsigned char reserved[64];
+	} c;
+};
+
+struct snd_xferi {
+	snd_pcm_sframes_t result;
+	void __user *buf;
+	snd_pcm_uframes_t frames;
+};
+
+struct snd_xfern {
+	snd_pcm_sframes_t result;
+	void __user * __user *bufs;
+	snd_pcm_uframes_t frames;
+};
+
+enum {
+	SNDRV_PCM_TSTAMP_TYPE_GETTIMEOFDAY = 0,	/* gettimeofday equivalent */
+	SNDRV_PCM_TSTAMP_TYPE_MONOTONIC,	/* posix_clock_monotonic equivalent */
+	SNDRV_PCM_TSTAMP_TYPE_MONOTONIC_RAW,    /* monotonic_raw (no NTP) */
+	SNDRV_PCM_TSTAMP_TYPE_LAST = SNDRV_PCM_TSTAMP_TYPE_MONOTONIC_RAW,
+};
+
+/* channel positions */
+enum {
+	SNDRV_CHMAP_UNKNOWN = 0,
+	SNDRV_CHMAP_NA,		/* N/A, silent */
+	SNDRV_CHMAP_MONO,	/* mono stream */
+	/* this follows the alsa-lib mixer channel value + 3 */
+	SNDRV_CHMAP_FL,		/* front left */
+	SNDRV_CHMAP_FR,		/* front right */
+	SNDRV_CHMAP_RL,		/* rear left */
+	SNDRV_CHMAP_RR,		/* rear right */
+	SNDRV_CHMAP_FC,		/* front center */
+	SNDRV_CHMAP_LFE,	/* LFE */
+	SNDRV_CHMAP_SL,		/* side left */
+	SNDRV_CHMAP_SR,		/* side right */
+	SNDRV_CHMAP_RC,		/* rear center */
+	/* new definitions */
+	SNDRV_CHMAP_FLC,	/* front left center */
+	SNDRV_CHMAP_FRC,	/* front right center */
+	SNDRV_CHMAP_RLC,	/* rear left center */
+	SNDRV_CHMAP_RRC,	/* rear right center */
+	SNDRV_CHMAP_FLW,	/* front left wide */
+	SNDRV_CHMAP_FRW,	/* front right wide */
+	SNDRV_CHMAP_FLH,	/* front left high */
+	SNDRV_CHMAP_FCH,	/* front center high */
+	SNDRV_CHMAP_FRH,	/* front right high */
+	SNDRV_CHMAP_TC,		/* top center */
+	SNDRV_CHMAP_TFL,	/* top front left */
+	SNDRV_CHMAP_TFR,	/* top front right */
+	SNDRV_CHMAP_TFC,	/* top front center */
+	SNDRV_CHMAP_TRL,	/* top rear left */
+	SNDRV_CHMAP_TRR,	/* top rear right */
+	SNDRV_CHMAP_TRC,	/* top rear center */
+	/* new definitions for UAC2 */
+	SNDRV_CHMAP_TFLC,	/* top front left center */
+	SNDRV_CHMAP_TFRC,	/* top front right center */
+	SNDRV_CHMAP_TSL,	/* top side left */
+	SNDRV_CHMAP_TSR,	/* top side right */
+	SNDRV_CHMAP_LLFE,	/* left LFE */
+	SNDRV_CHMAP_RLFE,	/* right LFE */
+	SNDRV_CHMAP_BC,		/* bottom center */
+	SNDRV_CHMAP_BLC,	/* bottom left center */
+	SNDRV_CHMAP_BRC,	/* bottom right center */
+	SNDRV_CHMAP_LAST = SNDRV_CHMAP_BRC,
+};
+
+#define SNDRV_CHMAP_POSITION_MASK	0xffff
+#define SNDRV_CHMAP_PHASE_INVERSE	(0x01 << 16)
+#define SNDRV_CHMAP_DRIVER_SPEC		(0x02 << 16)
+
+#define SNDRV_PCM_IOCTL_PVERSION	_IOR('A', 0x00, int)
+#define SNDRV_PCM_IOCTL_INFO		_IOR('A', 0x01, struct snd_pcm_info)
+#define SNDRV_PCM_IOCTL_TSTAMP		_IOW('A', 0x02, int)
+#define SNDRV_PCM_IOCTL_TTSTAMP		_IOW('A', 0x03, int)
+#define SNDRV_PCM_IOCTL_USER_PVERSION	_IOW('A', 0x04, int)
+#define SNDRV_PCM_IOCTL_HW_REFINE	_IOWR('A', 0x10, struct snd_pcm_hw_params)
+#define SNDRV_PCM_IOCTL_HW_PARAMS	_IOWR('A', 0x11, struct snd_pcm_hw_params)
+#define SNDRV_PCM_IOCTL_HW_FREE		_IO('A', 0x12)
+#define SNDRV_PCM_IOCTL_SW_PARAMS	_IOWR('A', 0x13, struct snd_pcm_sw_params)
+#define SNDRV_PCM_IOCTL_STATUS		_IOR('A', 0x20, struct snd_pcm_status)
+#define SNDRV_PCM_IOCTL_DELAY		_IOR('A', 0x21, snd_pcm_sframes_t)
+#define SNDRV_PCM_IOCTL_HWSYNC		_IO('A', 0x22)
+#define SNDRV_PCM_IOCTL_SYNC_PTR	_IOWR('A', 0x23, struct snd_pcm_sync_ptr)
+#define SNDRV_PCM_IOCTL_STATUS_EXT	_IOWR('A', 0x24, struct snd_pcm_status)
+#define SNDRV_PCM_IOCTL_CHANNEL_INFO	_IOR('A', 0x32, struct snd_pcm_channel_info)
+#define SNDRV_PCM_IOCTL_PREPARE		_IO('A', 0x40)
+#define SNDRV_PCM_IOCTL_RESET		_IO('A', 0x41)
+#define SNDRV_PCM_IOCTL_START		_IO('A', 0x42)
+#define SNDRV_PCM_IOCTL_DROP		_IO('A', 0x43)
+#define SNDRV_PCM_IOCTL_DRAIN		_IO('A', 0x44)
+#define SNDRV_PCM_IOCTL_PAUSE		_IOW('A', 0x45, int)
+#define SNDRV_PCM_IOCTL_REWIND		_IOW('A', 0x46, snd_pcm_uframes_t)
+#define SNDRV_PCM_IOCTL_RESUME		_IO('A', 0x47)
+#define SNDRV_PCM_IOCTL_XRUN		_IO('A', 0x48)
+#define SNDRV_PCM_IOCTL_FORWARD		_IOW('A', 0x49, snd_pcm_uframes_t)
+#define SNDRV_PCM_IOCTL_WRITEI_FRAMES	_IOW('A', 0x50, struct snd_xferi)
+#define SNDRV_PCM_IOCTL_READI_FRAMES	_IOR('A', 0x51, struct snd_xferi)
+#define SNDRV_PCM_IOCTL_WRITEN_FRAMES	_IOW('A', 0x52, struct snd_xfern)
+#define SNDRV_PCM_IOCTL_READN_FRAMES	_IOR('A', 0x53, struct snd_xfern)
+#define SNDRV_PCM_IOCTL_LINK		_IOW('A', 0x60, int)
+#define SNDRV_PCM_IOCTL_UNLINK		_IO('A', 0x61)
+
+/*****************************************************************************
+ *                                                                           *
+ *                            MIDI v1.0 interface                            *
+ *                                                                           *
+ *****************************************************************************/
+
+/*
+ *  Raw MIDI section - /dev/snd/midi??
+ */
+
+#define SNDRV_RAWMIDI_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 0)
+
+enum {
+	SNDRV_RAWMIDI_STREAM_OUTPUT = 0,
+	SNDRV_RAWMIDI_STREAM_INPUT,
+	SNDRV_RAWMIDI_STREAM_LAST = SNDRV_RAWMIDI_STREAM_INPUT,
+};
+
+#define SNDRV_RAWMIDI_INFO_OUTPUT		0x00000001
+#define SNDRV_RAWMIDI_INFO_INPUT		0x00000002
+#define SNDRV_RAWMIDI_INFO_DUPLEX		0x00000004
+
+struct snd_rawmidi_info {
+	unsigned int device;		/* RO/WR (control): device number */
+	unsigned int subdevice;		/* RO/WR (control): subdevice number */
+	int stream;			/* WR: stream */
+	int card;			/* R: card number */
+	unsigned int flags;		/* SNDRV_RAWMIDI_INFO_XXXX */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* name of device */
+	unsigned char subname[32];	/* name of active or selected subdevice */
+	unsigned int subdevices_count;
+	unsigned int subdevices_avail;
+	unsigned char reserved[64];	/* reserved for future use */
+};
+
+struct snd_rawmidi_params {
+	int stream;
+	size_t buffer_size;		/* queue size in bytes */
+	size_t avail_min;		/* minimum avail bytes for wakeup */
+	unsigned int no_active_sensing: 1; /* do not send active sensing byte in close() */
+	unsigned char reserved[16];	/* reserved for future use */
+};
+
+struct snd_rawmidi_status {
+	int stream;
+	struct timespec tstamp;		/* Timestamp */
+	size_t avail;			/* available bytes */
+	size_t xruns;			/* count of overruns since last status (in bytes) */
+	unsigned char reserved[16];	/* reserved for future use */
+};
+
+#define SNDRV_RAWMIDI_IOCTL_PVERSION	_IOR('W', 0x00, int)
+#define SNDRV_RAWMIDI_IOCTL_INFO	_IOR('W', 0x01, struct snd_rawmidi_info)
+#define SNDRV_RAWMIDI_IOCTL_PARAMS	_IOWR('W', 0x10, struct snd_rawmidi_params)
+#define SNDRV_RAWMIDI_IOCTL_STATUS	_IOWR('W', 0x20, struct snd_rawmidi_status)
+#define SNDRV_RAWMIDI_IOCTL_DROP	_IOW('W', 0x30, int)
+#define SNDRV_RAWMIDI_IOCTL_DRAIN	_IOW('W', 0x31, int)
+
+/*
+ *  Timer section - /dev/snd/timer
+ */
+
+#define SNDRV_TIMER_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 6)
+
+enum {
+	SNDRV_TIMER_CLASS_NONE = -1,
+	SNDRV_TIMER_CLASS_SLAVE = 0,
+	SNDRV_TIMER_CLASS_GLOBAL,
+	SNDRV_TIMER_CLASS_CARD,
+	SNDRV_TIMER_CLASS_PCM,
+	SNDRV_TIMER_CLASS_LAST = SNDRV_TIMER_CLASS_PCM,
+};
+
+/* slave timer classes */
+enum {
+	SNDRV_TIMER_SCLASS_NONE = 0,
+	SNDRV_TIMER_SCLASS_APPLICATION,
+	SNDRV_TIMER_SCLASS_SEQUENCER,		/* alias */
+	SNDRV_TIMER_SCLASS_OSS_SEQUENCER,	/* alias */
+	SNDRV_TIMER_SCLASS_LAST = SNDRV_TIMER_SCLASS_OSS_SEQUENCER,
+};
+
+/* global timers (device member) */
+#define SNDRV_TIMER_GLOBAL_SYSTEM	0
+#define SNDRV_TIMER_GLOBAL_RTC		1	/* unused */
+#define SNDRV_TIMER_GLOBAL_HPET		2
+#define SNDRV_TIMER_GLOBAL_HRTIMER	3
+
+/* info flags */
+#define SNDRV_TIMER_FLG_SLAVE		(1<<0)	/* cannot be controlled */
+
+struct snd_timer_id {
+	int dev_class;
+	int dev_sclass;
+	int card;
+	int device;
+	int subdevice;
+};
+
+struct snd_timer_ginfo {
+	struct snd_timer_id tid;	/* requested timer ID */
+	unsigned int flags;		/* timer flags - SNDRV_TIMER_FLG_* */
+	int card;			/* card number */
+	unsigned char id[64];		/* timer identification */
+	unsigned char name[80];		/* timer name */
+	unsigned long reserved0;	/* reserved for future use */
+	unsigned long resolution;	/* average period resolution in ns */
+	unsigned long resolution_min;	/* minimal period resolution in ns */
+	unsigned long resolution_max;	/* maximal period resolution in ns */
+	unsigned int clients;		/* active timer clients */
+	unsigned char reserved[32];
+};
+
+struct snd_timer_gparams {
+	struct snd_timer_id tid;	/* requested timer ID */
+	unsigned long period_num;	/* requested precise period duration (in seconds) - numerator */
+	unsigned long period_den;	/* requested precise period duration (in seconds) - denominator */
+	unsigned char reserved[32];
+};
+
+struct snd_timer_gstatus {
+	struct snd_timer_id tid;	/* requested timer ID */
+	unsigned long resolution;	/* current period resolution in ns */
+	unsigned long resolution_num;	/* precise current period resolution (in seconds) - numerator */
+	unsigned long resolution_den;	/* precise current period resolution (in seconds) - denominator */
+	unsigned char reserved[32];
+};
+
+struct snd_timer_select {
+	struct snd_timer_id id;	/* bind to timer ID */
+	unsigned char reserved[32];	/* reserved */
+};
+
+struct snd_timer_info {
+	unsigned int flags;		/* timer flags - SNDRV_TIMER_FLG_* */
+	int card;			/* card number */
+	unsigned char id[64];		/* timer identificator */
+	unsigned char name[80];		/* timer name */
+	unsigned long reserved0;	/* reserved for future use */
+	unsigned long resolution;	/* average period resolution in ns */
+	unsigned char reserved[64];	/* reserved */
+};
+
+#define SNDRV_TIMER_PSFLG_AUTO		(1<<0)	/* auto start, otherwise one-shot */
+#define SNDRV_TIMER_PSFLG_EXCLUSIVE	(1<<1)	/* exclusive use, precise start/stop/pause/continue */
+#define SNDRV_TIMER_PSFLG_EARLY_EVENT	(1<<2)	/* write early event to the poll queue */
+
+struct snd_timer_params {
+	unsigned int flags;		/* flags - SNDRV_MIXER_PSFLG_* */
+	unsigned int ticks;		/* requested resolution in ticks */
+	unsigned int queue_size;	/* total size of queue (32-1024) */
+	unsigned int reserved0;		/* reserved, was: failure locations */
+	unsigned int filter;		/* event filter (bitmask of SNDRV_TIMER_EVENT_*) */
+	unsigned char reserved[60];	/* reserved */
+};
+
+struct snd_timer_status {
+	struct timespec tstamp;		/* Timestamp - last update */
+	unsigned int resolution;	/* current period resolution in ns */
+	unsigned int lost;		/* counter of master tick lost */
+	unsigned int overrun;		/* count of read queue overruns */
+	unsigned int queue;		/* used queue size */
+	unsigned char reserved[64];	/* reserved */
+};
+
+#define SNDRV_TIMER_IOCTL_PVERSION	_IOR('T', 0x00, int)
+#define SNDRV_TIMER_IOCTL_NEXT_DEVICE	_IOWR('T', 0x01, struct snd_timer_id)
+#define SNDRV_TIMER_IOCTL_TREAD		_IOW('T', 0x02, int)
+#define SNDRV_TIMER_IOCTL_GINFO		_IOWR('T', 0x03, struct snd_timer_ginfo)
+#define SNDRV_TIMER_IOCTL_GPARAMS	_IOW('T', 0x04, struct snd_timer_gparams)
+#define SNDRV_TIMER_IOCTL_GSTATUS	_IOWR('T', 0x05, struct snd_timer_gstatus)
+#define SNDRV_TIMER_IOCTL_SELECT	_IOW('T', 0x10, struct snd_timer_select)
+#define SNDRV_TIMER_IOCTL_INFO		_IOR('T', 0x11, struct snd_timer_info)
+#define SNDRV_TIMER_IOCTL_PARAMS	_IOW('T', 0x12, struct snd_timer_params)
+#define SNDRV_TIMER_IOCTL_STATUS	_IOR('T', 0x14, struct snd_timer_status)
+/* The following four ioctls are changed since 1.0.9 due to confliction */
+#define SNDRV_TIMER_IOCTL_START		_IO('T', 0xa0)
+#define SNDRV_TIMER_IOCTL_STOP		_IO('T', 0xa1)
+#define SNDRV_TIMER_IOCTL_CONTINUE	_IO('T', 0xa2)
+#define SNDRV_TIMER_IOCTL_PAUSE		_IO('T', 0xa3)
+
+struct snd_timer_read {
+	unsigned int resolution;
+	unsigned int ticks;
+};
+
+enum {
+	SNDRV_TIMER_EVENT_RESOLUTION = 0,	/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_TICK,			/* val = ticks */
+	SNDRV_TIMER_EVENT_START,		/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_STOP,			/* val = 0 */
+	SNDRV_TIMER_EVENT_CONTINUE,		/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_PAUSE,		/* val = 0 */
+	SNDRV_TIMER_EVENT_EARLY,		/* val = 0, early event */
+	SNDRV_TIMER_EVENT_SUSPEND,		/* val = 0 */
+	SNDRV_TIMER_EVENT_RESUME,		/* val = resolution in ns */
+	/* master timer events for slave timer instances */
+	SNDRV_TIMER_EVENT_MSTART = SNDRV_TIMER_EVENT_START + 10,
+	SNDRV_TIMER_EVENT_MSTOP = SNDRV_TIMER_EVENT_STOP + 10,
+	SNDRV_TIMER_EVENT_MCONTINUE = SNDRV_TIMER_EVENT_CONTINUE + 10,
+	SNDRV_TIMER_EVENT_MPAUSE = SNDRV_TIMER_EVENT_PAUSE + 10,
+	SNDRV_TIMER_EVENT_MSUSPEND = SNDRV_TIMER_EVENT_SUSPEND + 10,
+	SNDRV_TIMER_EVENT_MRESUME = SNDRV_TIMER_EVENT_RESUME + 10,
+};
+
+struct snd_timer_tread {
+	int event;
+	struct timespec tstamp;
+	unsigned int val;
+};
+
+/****************************************************************************
+ *                                                                          *
+ *        Section for driver control interface - /dev/snd/control?          *
+ *                                                                          *
+ ****************************************************************************/
+
+#define SNDRV_CTL_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 7)
+
+struct snd_ctl_card_info {
+	int card;			/* card number */
+	int pad;			/* reserved for future (was type) */
+	unsigned char id[16];		/* ID of card (user selectable) */
+	unsigned char driver[16];	/* Driver name */
+	unsigned char name[32];		/* Short name of soundcard */
+	unsigned char longname[80];	/* name + info text about soundcard */
+	unsigned char reserved_[16];	/* reserved for future (was ID of mixer) */
+	unsigned char mixername[80];	/* visual mixer identification */
+	unsigned char components[128];	/* card components / fine identification, delimited with one space (AC97 etc..) */
+};
+
+typedef int __bitwise snd_ctl_elem_type_t;
+#define	SNDRV_CTL_ELEM_TYPE_NONE	((__force snd_ctl_elem_type_t) 0) /* invalid */
+#define	SNDRV_CTL_ELEM_TYPE_BOOLEAN	((__force snd_ctl_elem_type_t) 1) /* boolean type */
+#define	SNDRV_CTL_ELEM_TYPE_INTEGER	((__force snd_ctl_elem_type_t) 2) /* integer type */
+#define	SNDRV_CTL_ELEM_TYPE_ENUMERATED	((__force snd_ctl_elem_type_t) 3) /* enumerated type */
+#define	SNDRV_CTL_ELEM_TYPE_BYTES	((__force snd_ctl_elem_type_t) 4) /* byte array */
+#define	SNDRV_CTL_ELEM_TYPE_IEC958	((__force snd_ctl_elem_type_t) 5) /* IEC958 (S/PDIF) setup */
+#define	SNDRV_CTL_ELEM_TYPE_INTEGER64	((__force snd_ctl_elem_type_t) 6) /* 64-bit integer type */
+#define	SNDRV_CTL_ELEM_TYPE_LAST	SNDRV_CTL_ELEM_TYPE_INTEGER64
+
+typedef int __bitwise snd_ctl_elem_iface_t;
+#define	SNDRV_CTL_ELEM_IFACE_CARD	((__force snd_ctl_elem_iface_t) 0) /* global control */
+#define	SNDRV_CTL_ELEM_IFACE_HWDEP	((__force snd_ctl_elem_iface_t) 1) /* hardware dependent device */
+#define	SNDRV_CTL_ELEM_IFACE_MIXER	((__force snd_ctl_elem_iface_t) 2) /* virtual mixer device */
+#define	SNDRV_CTL_ELEM_IFACE_PCM	((__force snd_ctl_elem_iface_t) 3) /* PCM device */
+#define	SNDRV_CTL_ELEM_IFACE_RAWMIDI	((__force snd_ctl_elem_iface_t) 4) /* RawMidi device */
+#define	SNDRV_CTL_ELEM_IFACE_TIMER	((__force snd_ctl_elem_iface_t) 5) /* timer device */
+#define	SNDRV_CTL_ELEM_IFACE_SEQUENCER	((__force snd_ctl_elem_iface_t) 6) /* sequencer client */
+#define	SNDRV_CTL_ELEM_IFACE_LAST	SNDRV_CTL_ELEM_IFACE_SEQUENCER
+
+#define SNDRV_CTL_ELEM_ACCESS_READ		(1<<0)
+#define SNDRV_CTL_ELEM_ACCESS_WRITE		(1<<1)
+#define SNDRV_CTL_ELEM_ACCESS_READWRITE		(SNDRV_CTL_ELEM_ACCESS_READ|SNDRV_CTL_ELEM_ACCESS_WRITE)
+#define SNDRV_CTL_ELEM_ACCESS_VOLATILE		(1<<2)	/* control value may be changed without a notification */
+#define SNDRV_CTL_ELEM_ACCESS_TIMESTAMP		(1<<3)	/* when was control changed */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_READ		(1<<4)	/* TLV read is possible */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_WRITE		(1<<5)	/* TLV write is possible */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE	(SNDRV_CTL_ELEM_ACCESS_TLV_READ|SNDRV_CTL_ELEM_ACCESS_TLV_WRITE)
+#define SNDRV_CTL_ELEM_ACCESS_TLV_COMMAND	(1<<6)	/* TLV command is possible */
+#define SNDRV_CTL_ELEM_ACCESS_INACTIVE		(1<<8)	/* control does actually nothing, but may be updated */
+#define SNDRV_CTL_ELEM_ACCESS_LOCK		(1<<9)	/* write lock */
+#define SNDRV_CTL_ELEM_ACCESS_OWNER		(1<<10)	/* write lock owner */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK	(1<<28)	/* kernel use a TLV callback */
+#define SNDRV_CTL_ELEM_ACCESS_USER		(1<<29) /* user space element */
+/* bits 30 and 31 are obsoleted (for indirect access) */
+
+/* for further details see the ACPI and PCI power management specification */
+#define SNDRV_CTL_POWER_D0		0x0000	/* full On */
+#define SNDRV_CTL_POWER_D1		0x0100	/* partial On */
+#define SNDRV_CTL_POWER_D2		0x0200	/* partial On */
+#define SNDRV_CTL_POWER_D3		0x0300	/* Off */
+#define SNDRV_CTL_POWER_D3hot		(SNDRV_CTL_POWER_D3|0x0000)	/* Off, with power */
+#define SNDRV_CTL_POWER_D3cold		(SNDRV_CTL_POWER_D3|0x0001)	/* Off, without power */
+
+#define SNDRV_CTL_ELEM_ID_NAME_MAXLEN	44
+
+struct snd_ctl_elem_id {
+	unsigned int numid;		/* numeric identifier, zero = invalid */
+	snd_ctl_elem_iface_t iface;	/* interface identifier */
+	unsigned int device;		/* device/client number */
+	unsigned int subdevice;		/* subdevice (substream) number */
+	unsigned char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];		/* ASCII name of item */
+	unsigned int index;		/* index of item */
+};
+
+struct snd_ctl_elem_list {
+	unsigned int offset;		/* W: first element ID to get */
+	unsigned int space;		/* W: count of element IDs to get */
+	unsigned int used;		/* R: count of element IDs set */
+	unsigned int count;		/* R: count of all elements */
+	struct snd_ctl_elem_id __user *pids; /* R: IDs */
+	unsigned char reserved[50];
+};
+
+struct snd_ctl_elem_info {
+	struct snd_ctl_elem_id id;	/* W: element ID */
+	snd_ctl_elem_type_t type;	/* R: value type - SNDRV_CTL_ELEM_TYPE_* */
+	unsigned int access;		/* R: value access (bitmask) - SNDRV_CTL_ELEM_ACCESS_* */
+	unsigned int count;		/* count of values */
+	__kernel_pid_t owner;		/* owner's PID of this control */
+	union {
+		struct {
+			long min;		/* R: minimum value */
+			long max;		/* R: maximum value */
+			long step;		/* R: step (0 variable) */
+		} integer;
+		struct {
+			long long min;		/* R: minimum value */
+			long long max;		/* R: maximum value */
+			long long step;		/* R: step (0 variable) */
+		} integer64;
+		struct {
+			unsigned int items;	/* R: number of items */
+			unsigned int item;	/* W: item number */
+			char name[64];		/* R: value name */
+			__u64 names_ptr;	/* W: names list (ELEM_ADD only) */
+			unsigned int names_length;
+		} enumerated;
+		unsigned char reserved[128];
+	} value;
+	union {
+		unsigned short d[4];		/* dimensions */
+		unsigned short *d_ptr;		/* indirect - obsoleted */
+	} dimen;
+	unsigned char reserved[64-4*sizeof(unsigned short)];
+};
+
+struct snd_ctl_elem_value {
+	struct snd_ctl_elem_id id;	/* W: element ID */
+	unsigned int indirect: 1;	/* W: indirect access - obsoleted */
+	union {
+		union {
+			long value[128];
+			long *value_ptr;	/* obsoleted */
+		} integer;
+		union {
+			long long value[64];
+			long long *value_ptr;	/* obsoleted */
+		} integer64;
+		union {
+			unsigned int item[128];
+			unsigned int *item_ptr;	/* obsoleted */
+		} enumerated;
+		union {
+			unsigned char data[512];
+			unsigned char *data_ptr;	/* obsoleted */
+		} bytes;
+		struct snd_aes_iec958 iec958;
+	} value;		/* RO */
+	struct timespec tstamp;
+	unsigned char reserved[128-sizeof(struct timespec)];
+};
+
+struct snd_ctl_tlv {
+	unsigned int numid;	/* control element numeric identification */
+	unsigned int length;	/* in bytes aligned to 4 */
+	unsigned int tlv[0];	/* first TLV */
+};
+
+#define SNDRV_CTL_IOCTL_PVERSION	_IOR('U', 0x00, int)
+#define SNDRV_CTL_IOCTL_CARD_INFO	_IOR('U', 0x01, struct snd_ctl_card_info)
+#define SNDRV_CTL_IOCTL_ELEM_LIST	_IOWR('U', 0x10, struct snd_ctl_elem_list)
+#define SNDRV_CTL_IOCTL_ELEM_INFO	_IOWR('U', 0x11, struct snd_ctl_elem_info)
+#define SNDRV_CTL_IOCTL_ELEM_READ	_IOWR('U', 0x12, struct snd_ctl_elem_value)
+#define SNDRV_CTL_IOCTL_ELEM_WRITE	_IOWR('U', 0x13, struct snd_ctl_elem_value)
+#define SNDRV_CTL_IOCTL_ELEM_LOCK	_IOW('U', 0x14, struct snd_ctl_elem_id)
+#define SNDRV_CTL_IOCTL_ELEM_UNLOCK	_IOW('U', 0x15, struct snd_ctl_elem_id)
+#define SNDRV_CTL_IOCTL_SUBSCRIBE_EVENTS _IOWR('U', 0x16, int)
+#define SNDRV_CTL_IOCTL_ELEM_ADD	_IOWR('U', 0x17, struct snd_ctl_elem_info)
+#define SNDRV_CTL_IOCTL_ELEM_REPLACE	_IOWR('U', 0x18, struct snd_ctl_elem_info)
+#define SNDRV_CTL_IOCTL_ELEM_REMOVE	_IOWR('U', 0x19, struct snd_ctl_elem_id)
+#define SNDRV_CTL_IOCTL_TLV_READ	_IOWR('U', 0x1a, struct snd_ctl_tlv)
+#define SNDRV_CTL_IOCTL_TLV_WRITE	_IOWR('U', 0x1b, struct snd_ctl_tlv)
+#define SNDRV_CTL_IOCTL_TLV_COMMAND	_IOWR('U', 0x1c, struct snd_ctl_tlv)
+#define SNDRV_CTL_IOCTL_HWDEP_NEXT_DEVICE _IOWR('U', 0x20, int)
+#define SNDRV_CTL_IOCTL_HWDEP_INFO	_IOR('U', 0x21, struct snd_hwdep_info)
+#define SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE	_IOR('U', 0x30, int)
+#define SNDRV_CTL_IOCTL_PCM_INFO	_IOWR('U', 0x31, struct snd_pcm_info)
+#define SNDRV_CTL_IOCTL_PCM_PREFER_SUBDEVICE _IOW('U', 0x32, int)
+#define SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE _IOWR('U', 0x40, int)
+#define SNDRV_CTL_IOCTL_RAWMIDI_INFO	_IOWR('U', 0x41, struct snd_rawmidi_info)
+#define SNDRV_CTL_IOCTL_RAWMIDI_PREFER_SUBDEVICE _IOW('U', 0x42, int)
+#define SNDRV_CTL_IOCTL_POWER		_IOWR('U', 0xd0, int)
+#define SNDRV_CTL_IOCTL_POWER_STATE	_IOR('U', 0xd1, int)
+
+/*
+ *  Read interface.
+ */
+
+enum sndrv_ctl_event_type {
+	SNDRV_CTL_EVENT_ELEM = 0,
+	SNDRV_CTL_EVENT_LAST = SNDRV_CTL_EVENT_ELEM,
+};
+
+#define SNDRV_CTL_EVENT_MASK_VALUE	(1<<0)	/* element value was changed */
+#define SNDRV_CTL_EVENT_MASK_INFO	(1<<1)	/* element info was changed */
+#define SNDRV_CTL_EVENT_MASK_ADD	(1<<2)	/* element was added */
+#define SNDRV_CTL_EVENT_MASK_TLV	(1<<3)	/* element TLV tree was changed */
+#define SNDRV_CTL_EVENT_MASK_REMOVE	(~0U)	/* element was removed */
+
+struct snd_ctl_event {
+	int type;	/* event type - SNDRV_CTL_EVENT_* */
+	union {
+		struct {
+			unsigned int mask;
+			struct snd_ctl_elem_id id;
+		} elem;
+		unsigned char data8[60];
+	} data;
+};
+
+/*
+ *  Control names
+ */
+
+#define SNDRV_CTL_NAME_NONE				""
+#define SNDRV_CTL_NAME_PLAYBACK				"Playback "
+#define SNDRV_CTL_NAME_CAPTURE				"Capture "
+
+#define SNDRV_CTL_NAME_IEC958_NONE			""
+#define SNDRV_CTL_NAME_IEC958_SWITCH			"Switch"
+#define SNDRV_CTL_NAME_IEC958_VOLUME			"Volume"
+#define SNDRV_CTL_NAME_IEC958_DEFAULT			"Default"
+#define SNDRV_CTL_NAME_IEC958_MASK			"Mask"
+#define SNDRV_CTL_NAME_IEC958_CON_MASK			"Con Mask"
+#define SNDRV_CTL_NAME_IEC958_PRO_MASK			"Pro Mask"
+#define SNDRV_CTL_NAME_IEC958_PCM_STREAM		"PCM Stream"
+#define SNDRV_CTL_NAME_IEC958(expl,direction,what)	"IEC958 " expl SNDRV_CTL_NAME_##direction SNDRV_CTL_NAME_IEC958_##what
+
+#endif /* _UAPI__SOUND_ASOUND_H */