Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

16 files changed, 2076 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/gpu/drm_mm.sh b/tools/testing/selftests/drivers/gpu/drm_mm.sh
new file mode 100755
index 000000000..b789dc825
--- /dev/null
+++ b/tools/testing/selftests/drivers/gpu/drm_mm.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# Runs API tests for struct drm_mm (DRM range manager)
+
+if ! /sbin/modprobe -n -q test-drm_mm; then
+       echo "drivers/gpu/drm_mm: [skip]"
+       exit 77
+fi
+
+if /sbin/modprobe -q test-drm_mm; then
+       /sbin/modprobe -q -r test-drm_mm
+       echo "drivers/gpu/drm_mm: ok"
+else
+       echo "drivers/gpu/drm_mm: [FAIL]"
+       exit 1
+fi
diff --git a/tools/testing/selftests/drivers/gpu/i915.sh b/tools/testing/selftests/drivers/gpu/i915.sh
new file mode 100755
index 000000000..d3895bc71
--- /dev/null
+++ b/tools/testing/selftests/drivers/gpu/i915.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# Runs hardware independent tests for i915 (drivers/gpu/drm/i915)
+
+if ! /sbin/modprobe -q -r i915; then
+	echo "drivers/gpu/i915: [SKIP]"
+	exit 77
+fi
+
+if /sbin/modprobe -q i915 mock_selftests=-1; then
+	/sbin/modprobe -q -r i915
+	echo "drivers/gpu/i915: ok"
+else
+	echo "drivers/gpu/i915: [FAIL]"
+	exit 1
+fi
diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh
new file mode 100755
index 000000000..76f1ab489
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh
@@ -0,0 +1,217 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# ../../../net/forwarding/mirror_gre_topo_lib.sh for more details.
+#
+# Test offloading various features of offloading gretap mirrors specific to
+# mlxsw.
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+NUM_NETIFS=6
+source $lib_dir/lib.sh
+source $lib_dir/mirror_lib.sh
+source $lib_dir/mirror_gre_lib.sh
+source $lib_dir/mirror_gre_topo_lib.sh
+
+setup_keyful()
+{
+	tunnel_create gt6-key ip6gretap 2001:db8:3::1 2001:db8:3::2 \
+		      ttl 100 tos inherit allow-localremote \
+		      key 1234
+
+	tunnel_create h3-gt6-key ip6gretap 2001:db8:3::2 2001:db8:3::1 \
+		      key 1234
+	ip link set h3-gt6-key vrf v$h3
+	matchall_sink_create h3-gt6-key
+
+	ip address add dev $swp3 2001:db8:3::1/64
+	ip address add dev $h3 2001:db8:3::2/64
+}
+
+cleanup_keyful()
+{
+	ip address del dev $h3 2001:db8:3::2/64
+	ip address del dev $swp3 2001:db8:3::1/64
+
+	tunnel_destroy h3-gt6-key
+	tunnel_destroy gt6-key
+}
+
+setup_soft()
+{
+	# Set up a topology for testing underlay routes that point at an
+	# unsupported soft device.
+
+	tunnel_create gt6-soft ip6gretap 2001:db8:4::1 2001:db8:4::2 \
+		      ttl 100 tos inherit allow-localremote
+
+	tunnel_create h3-gt6-soft ip6gretap 2001:db8:4::2 2001:db8:4::1
+	ip link set h3-gt6-soft vrf v$h3
+	matchall_sink_create h3-gt6-soft
+
+	ip link add name v1 type veth peer name v2
+	ip link set dev v1 up
+	ip address add dev v1 2001:db8:4::1/64
+
+	ip link set dev v2 vrf v$h3
+	ip link set dev v2 up
+	ip address add dev v2 2001:db8:4::2/64
+}
+
+cleanup_soft()
+{
+	ip link del dev v1
+
+	tunnel_destroy h3-gt6-soft
+	tunnel_destroy gt6-soft
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	setup_keyful
+	setup_soft
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	cleanup_soft
+	cleanup_keyful
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_ttl_inherit()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev type $type ttl inherit
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev type $type ttl 100
+
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: no offload on TTL of inherit ($tcflags)"
+}
+
+test_span_gre_tos_fixed()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev type $type tos 0x10
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev type $type tos inherit
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: no offload on a fixed TOS ($tcflags)"
+}
+
+test_span_failable()
+{
+	local should_fail=$1; shift
+	local tundev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	if ((should_fail)); then
+	    fail_test_span_gre_dir  $tundev ingress
+	else
+	    quick_test_span_gre_dir $tundev ingress
+	fi
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: should_fail=$should_fail ($tcflags)"
+}
+
+test_failable()
+{
+	local should_fail=$1; shift
+
+	test_span_failable $should_fail gt6-key "mirror to keyful gretap"
+	test_span_failable $should_fail gt6-soft "mirror to gretap w/ soft underlay"
+}
+
+test_sw()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	test_failable 0
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+test_hw()
+{
+	test_failable 1
+
+	test_span_gre_tos_fixed gt4 gretap "mirror to gretap"
+	test_span_gre_tos_fixed gt6 ip6gretap "mirror to ip6gretap"
+
+	test_span_gre_ttl_inherit gt4 gretap "mirror to gretap"
+	test_span_gre_ttl_inherit gt6 ip6gretap "mirror to ip6gretap"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+if ! tc_offload_check; then
+    check_err 1 "Could not test offloaded functionality"
+    log_test "mlxsw-specific tests for mirror to gretap"
+    exit
+fi
+
+tcflags="skip_hw"
+test_sw
+
+tcflags="skip_sw"
+test_hw
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh
new file mode 100644
index 000000000..6f3a70df6
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Test offloading a number of mirrors-to-gretap. The test creates a number of
+# tunnels. Then it adds one flower mirror for each of the tunnels, matching a
+# given host IP. Then it generates traffic at each of the host IPs and checks
+# that the traffic has been mirrored at the appropriate tunnel.
+#
+#   +--------------------------+                   +--------------------------+
+#   | H1                       |                   |                       H2 |
+#   |     + $h1                |                   |                $h2 +     |
+#   |     | 2001:db8:1:X::1/64 |                   | 2001:db8:1:X::2/64 |     |
+#   +-----|--------------------+                   +--------------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirrors                                                  |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   |     + $swp3                          + gt6-<X> (ip6gretap)              |
+#   |     | 2001:db8:2:X::1/64             : loc=2001:db8:2:X::1              |
+#   |     |                                : rem=2001:db8:2:X::2              |
+#   |     |                                : ttl=100                          |
+#   |     |                                : tos=inherit                      |
+#   |     |                                :                                  |
+#   +-----|--------------------------------:----------------------------------+
+#         |                                :
+#   +-----|--------------------------------:----------------------------------+
+#   | H3  + $h3                            + h3-gt6-<X> (ip6gretap)           |
+#   |       2001:db8:2:X::2/64               loc=2001:db8:2:X::2              |
+#   |                                        rem=2001:db8:2:X::1              |
+#   |                                        ttl=100                          |
+#   |                                        tos=inherit                      |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+
+source ../../../../net/forwarding/mirror_lib.sh
+
+MIRROR_NUM_NETIFS=6
+
+mirror_gre_ipv6_addr()
+{
+	local net=$1; shift
+	local num=$1; shift
+
+	printf "2001:db8:%x:%x" $net $num
+}
+
+mirror_gre_tunnels_create()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	MIRROR_GRE_BATCH_FILE="$(mktemp)"
+	for ((i=0; i < count; ++i)); do
+		local match_dip=$(mirror_gre_ipv6_addr 1 $i)::2
+		local htun=h3-gt6-$i
+		local tun=gt6-$i
+
+		((mirror_gre_tunnels++))
+
+		ip address add dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64
+		ip address add dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64
+
+		ip address add dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64
+		ip address add dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64
+
+		tunnel_create $tun ip6gretap \
+			      $(mirror_gre_ipv6_addr 2 $i)::1 \
+			      $(mirror_gre_ipv6_addr 2 $i)::2 \
+			      ttl 100 tos inherit allow-localremote
+
+		tunnel_create $htun ip6gretap \
+			      $(mirror_gre_ipv6_addr 2 $i)::2 \
+			      $(mirror_gre_ipv6_addr 2 $i)::1
+		ip link set $htun vrf v$h3
+		matchall_sink_create $htun
+
+		cat >> $MIRROR_GRE_BATCH_FILE <<-EOF
+			filter add dev $swp1 ingress pref 1000 \
+				protocol ipv6 \
+				flower $tcflags dst_ip $match_dip \
+				action mirred egress mirror dev $tun
+		EOF
+	done
+
+	tc -b $MIRROR_GRE_BATCH_FILE
+	check_err_fail $should_fail $? "Mirror rule insertion"
+}
+
+mirror_gre_tunnels_destroy()
+{
+	local count=$1; shift
+
+	for ((i=0; i < count; ++i)); do
+		local htun=h3-gt6-$i
+		local tun=gt6-$i
+
+		ip address del dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64
+		ip address del dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64
+
+		ip address del dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64
+		ip address del dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64
+
+		tunnel_destroy $htun
+		tunnel_destroy $tun
+	done
+}
+
+__mirror_gre_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	mirror_gre_tunnels_create $count $should_fail
+	if ((should_fail)); then
+	    return
+	fi
+
+	sleep 5
+
+	for ((i = 0; i < count; ++i)); do
+		local dip=$(mirror_gre_ipv6_addr 1 $i)::2
+		local htun=h3-gt6-$i
+		local message
+
+		icmp6_capture_install $htun
+		mirror_test v$h1 "" $dip $htun 100 10
+		icmp6_capture_uninstall $htun
+	done
+}
+
+mirror_gre_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then
+		check_err 1 "Could not test offloaded functionality"
+		return
+	fi
+
+	tcflags="skip_sw"
+	__mirror_gre_test $count $should_fail
+}
+
+mirror_gre_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	mirror_gre_tunnels=0
+
+	vrf_prepare
+
+	simple_if_init $h1
+	simple_if_init $h2
+	simple_if_init $h3
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	ip link set dev $swp3 up
+}
+
+mirror_gre_cleanup()
+{
+	mirror_gre_tunnels_destroy $mirror_gre_tunnels
+
+	ip link set dev $swp3 down
+
+	ip link set dev $swp2 down
+
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+
+	ip link del dev br1
+
+	simple_if_fini $h3
+	simple_if_fini $h2
+	simple_if_fini $h1
+
+	vrf_cleanup
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh
new file mode 100755
index 000000000..1ca631d5a
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh
@@ -0,0 +1,189 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for DSCP prioritization and rewrite. Packets ingress $swp1 with a DSCP
+# tag and are prioritized according to the map at $swp1. They egress $swp2 and
+# the DSCP value is updated to match the map at that interface. The updated DSCP
+# tag is verified at $h2.
+#
+# ICMP responses are produced with the same DSCP tag that arrived at $h2. They
+# go through prioritization at $swp2 and DSCP retagging at $swp1. The tag is
+# verified at $h1--it should match the original tag.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1             |                             |            $h2 +     |
+# |    | 192.0.2.1/28    |                             |   192.0.2.2/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                                                |
+# +----|----------------------------------------------------------------|-----+
+# | SW |                                                                |     |
+# |  +-|----------------------------------------------------------------|-+   |
+# |  | + $swp1                       BR                           $swp2 + |   |
+# |  |   APP=0,5,10 .. 7,5,17                      APP=0,5,20 .. 7,5,27   |   |
+# |  +--------------------------------------------------------------------+   |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	test_dscp
+"
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+NUM_NETIFS=4
+source $lib_dir/lib.sh
+
+h1_create()
+{
+	local dscp;
+
+	simple_if_init $h1 192.0.2.1/28
+	tc qdisc add dev $h1 clsact
+	dscp_capture_install $h1 10
+}
+
+h1_destroy()
+{
+	dscp_capture_uninstall $h1 10
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+	tc qdisc add dev $h2 clsact
+	dscp_capture_install $h2 20
+}
+
+h2_destroy()
+{
+	dscp_capture_uninstall $h2 20
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+dscp_map()
+{
+	local base=$1; shift
+
+	for prio in {0..7}; do
+		echo app=$prio,5,$((base + prio))
+	done
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	lldptool -T -i $swp1 -V APP $(dscp_map 10) >/dev/null
+	lldptool -T -i $swp2 -V APP $(dscp_map 20) >/dev/null
+	lldpad_app_wait_set $swp1
+	lldpad_app_wait_set $swp2
+}
+
+switch_destroy()
+{
+	lldptool -T -i $swp2 -V APP -d $(dscp_map 20) >/dev/null
+	lldptool -T -i $swp1 -V APP -d $(dscp_map 10) >/dev/null
+	lldpad_app_wait_del
+
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+dscp_ping_test()
+{
+	local vrf_name=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local prio=$1; shift
+	local dev_10=$1; shift
+	local dev_20=$1; shift
+
+	local dscp_10=$(((prio + 10) << 2))
+	local dscp_20=$(((prio + 20) << 2))
+
+	RET=0
+
+	local -A t0s
+	eval "t0s=($(dscp_fetch_stats $dev_10 10)
+		   $(dscp_fetch_stats $dev_20 20))"
+
+	ip vrf exec $vrf_name \
+	   ${PING} -Q $dscp_10 ${sip:+-I $sip} $dip \
+		   -c 10 -i 0.1 -w 2 &> /dev/null
+
+	local -A t1s
+	eval "t1s=($(dscp_fetch_stats $dev_10 10)
+		   $(dscp_fetch_stats $dev_20 20))"
+
+	for key in ${!t0s[@]}; do
+		local expect
+		if ((key == prio+10 || key == prio+20)); then
+			expect=10
+		else
+			expect=0
+		fi
+
+		local delta=$((t1s[$key] - t0s[$key]))
+		((expect == delta))
+		check_err $? "DSCP $key: Expected to capture $expect packets, got $delta."
+	done
+
+	log_test "DSCP rewrite: $dscp_10-(prio $prio)-$dscp_20"
+}
+
+test_dscp()
+{
+	for prio in {0..7}; do
+		dscp_ping_test v$h1 192.0.2.1 192.0.2.2 $prio $h1 $h2
+	done
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh
new file mode 100755
index 000000000..281d90766
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh
@@ -0,0 +1,233 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for DSCP prioritization in the router.
+#
+# With ip_forward_update_priority disabled, the packets are expected to keep
+# their DSCP (which in this test uses only values 0..7) intact as they are
+# forwarded by the switch. That is verified at $h2. ICMP responses are formed
+# with the same DSCP as the requests, and likewise pass through the switch
+# intact, which is verified at $h1.
+#
+# With ip_forward_update_priority enabled, router reprioritizes the packets
+# according to the table in reprioritize(). Thus, say, DSCP 7 maps to priority
+# 4, which on egress maps back to DSCP 4. The response packet then gets
+# reprioritized to 6, getting DSCP 6 on egress.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1             |                             |            $h2 +     |
+# |    | 192.0.2.1/28    |                             |  192.0.2.18/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                                                |
+# +----|----------------------------------------------------------------|-----+
+# | SW |                                                                |     |
+# |    + $swp1                                                    $swp2 +     |
+# |      192.0.2.2/28                                     192.0.2.17/28       |
+# |      APP=0,5,0 .. 7,5,7                          APP=0,5,0 .. 7,5,7       |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	test_update
+	test_no_update
+"
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+NUM_NETIFS=4
+source $lib_dir/lib.sh
+
+reprioritize()
+{
+	local in=$1; shift
+
+	# This is based on rt_tos2priority in include/net/route.h. Assuming 1:1
+	# mapping between priorities and TOS, it yields a new priority for a
+	# packet with ingress priority of $in.
+	local -a reprio=(0 0 2 2 6 6 4 4)
+
+	echo ${reprio[$in]}
+}
+
+h1_create()
+{
+	local dscp;
+
+	simple_if_init $h1 192.0.2.1/28
+	tc qdisc add dev $h1 clsact
+	dscp_capture_install $h1 0
+	ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+	dscp_capture_uninstall $h1 0
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.18/28
+	tc qdisc add dev $h2 clsact
+	dscp_capture_install $h2 0
+	ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+	dscp_capture_uninstall $h2 0
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.18/28
+}
+
+dscp_map()
+{
+	local base=$1; shift
+
+	for prio in {0..7}; do
+		echo app=$prio,5,$((base + prio))
+	done
+}
+
+switch_create()
+{
+	simple_if_init $swp1 192.0.2.2/28
+	__simple_if_init $swp2 v$swp1 192.0.2.17/28
+
+	lldptool -T -i $swp1 -V APP $(dscp_map 0) >/dev/null
+	lldptool -T -i $swp2 -V APP $(dscp_map 0) >/dev/null
+	lldpad_app_wait_set $swp1
+	lldpad_app_wait_set $swp2
+}
+
+switch_destroy()
+{
+	lldptool -T -i $swp2 -V APP -d $(dscp_map 0) >/dev/null
+	lldptool -T -i $swp1 -V APP -d $(dscp_map 0) >/dev/null
+	lldpad_app_wait_del
+
+	__simple_if_fini $swp2 192.0.2.17/28
+	simple_if_fini $swp1 192.0.2.2/28
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	sysctl_set net.ipv4.ip_forward_update_priority 1
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	sysctl_restore net.ipv4.ip_forward_update_priority
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.18
+}
+
+dscp_ping_test()
+{
+	local vrf_name=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local prio=$1; shift
+	local reprio=$1; shift
+	local dev1=$1; shift
+	local dev2=$1; shift
+
+	local prio2=$($reprio $prio)   # ICMP Request egress prio
+	local prio3=$($reprio $prio2)  # ICMP Response egress prio
+
+	local dscp=$((prio << 2))     # ICMP Request ingress DSCP
+	local dscp2=$((prio2 << 2))   # ICMP Request egress DSCP
+	local dscp3=$((prio3 << 2))   # ICMP Response egress DSCP
+
+	RET=0
+
+	eval "local -A dev1_t0s=($(dscp_fetch_stats $dev1 0))"
+	eval "local -A dev2_t0s=($(dscp_fetch_stats $dev2 0))"
+
+	ip vrf exec $vrf_name \
+	   ${PING} -Q $dscp ${sip:+-I $sip} $dip \
+		   -c 10 -i 0.1 -w 2 &> /dev/null
+
+	eval "local -A dev1_t1s=($(dscp_fetch_stats $dev1 0))"
+	eval "local -A dev2_t1s=($(dscp_fetch_stats $dev2 0))"
+
+	for i in {0..7}; do
+		local dscpi=$((i << 2))
+		local expect2=0
+		local expect3=0
+
+		if ((i == prio2)); then
+			expect2=10
+		fi
+		if ((i == prio3)); then
+			expect3=10
+		fi
+
+		local delta=$((dev2_t1s[$i] - dev2_t0s[$i]))
+		((expect2 == delta))
+		check_err $? "DSCP $dscpi@$dev2: Expected to capture $expect2 packets, got $delta."
+
+		delta=$((dev1_t1s[$i] - dev1_t0s[$i]))
+		((expect3 == delta))
+		check_err $? "DSCP $dscpi@$dev1: Expected to capture $expect3 packets, got $delta."
+	done
+
+	log_test "DSCP rewrite: $dscp-(prio $prio2)-$dscp2-(prio $prio3)-$dscp3"
+}
+
+__test_update()
+{
+	local update=$1; shift
+	local reprio=$1; shift
+
+	sysctl_restore net.ipv4.ip_forward_update_priority
+	sysctl_set net.ipv4.ip_forward_update_priority $update
+
+	for prio in {0..7}; do
+		dscp_ping_test v$h1 192.0.2.1 192.0.2.18 $prio $reprio $h1 $h2
+	done
+}
+
+test_update()
+{
+	__test_update 1 reprioritize
+}
+
+test_no_update()
+{
+	__test_update 0 echo
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh
new file mode 100644
index 000000000..d231649b4
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh
@@ -0,0 +1,167 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ROUTER_NUM_NETIFS=4
+
+router_h1_create()
+{
+	simple_if_init $h1 192.0.1.1/24
+	ip route add 193.0.0.0/8 via 192.0.1.2 dev $h1
+}
+
+router_h1_destroy()
+{
+	ip route del 193.0.0.0/8 via 192.0.1.2 dev $h1
+	simple_if_fini $h1 192.0.1.1/24
+}
+
+router_h2_create()
+{
+	simple_if_init $h2 192.0.2.1/24
+	tc qdisc add dev $h2 handle ffff: ingress
+}
+
+router_h2_destroy()
+{
+	tc qdisc del dev $h2 handle ffff: ingress
+	simple_if_fini $h2 192.0.2.1/24
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+
+	ip address add 192.0.1.2/24 dev $rp1
+	ip address add 192.0.2.2/24 dev $rp2
+}
+
+router_destroy()
+{
+	ip address del 192.0.2.2/24 dev $rp2
+	ip address del 192.0.1.2/24 dev $rp1
+
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+router_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h1mac=$(mac_get $h1)
+	rp1mac=$(mac_get $rp1)
+
+	vrf_prepare
+
+	router_h1_create
+	router_h2_create
+
+	router_create
+}
+
+router_offload_validate()
+{
+	local route_count=$1
+	local offloaded_count
+
+	offloaded_count=$(ip route | grep -o 'offload' | wc -l)
+	[[ $offloaded_count -ge $route_count ]]
+}
+
+router_routes_create()
+{
+	local route_count=$1
+	local count=0
+
+	ROUTE_FILE="$(mktemp)"
+
+	for i in {0..255}
+	do
+		for j in {0..255}
+		do
+			for k in {0..255}
+			do
+				if [[ $count -eq $route_count ]]; then
+					break 3
+				fi
+
+				echo route add 193.${i}.${j}.${k}/32 via \
+				       192.0.2.1 dev $rp2  >> $ROUTE_FILE
+				((count++))
+			done
+		done
+	done
+
+	ip -b $ROUTE_FILE &> /dev/null
+}
+
+router_routes_destroy()
+{
+	if [[ -v ROUTE_FILE ]]; then
+		rm -f $ROUTE_FILE
+	fi
+}
+
+router_test()
+{
+	local route_count=$1
+	local should_fail=$2
+	local count=0
+
+	RET=0
+
+	router_routes_create $route_count
+
+	router_offload_validate $route_count
+	check_err_fail $should_fail $? "Offload of $route_count routes"
+	if [[ $RET -ne 0 ]] || [[ $should_fail -eq 1 ]]; then
+		return
+	fi
+
+	tc filter add dev $h2 ingress protocol ip pref 1 flower \
+		skip_sw dst_ip 193.0.0.0/8 action drop
+
+	for i in {0..255}
+	do
+		for j in {0..255}
+		do
+			for k in {0..255}
+			do
+				if [[ $count -eq $route_count ]]; then
+					break 3
+				fi
+
+				$MZ $h1 -c 1 -p 64 -a $h1mac -b $rp1mac \
+					-A 192.0.1.1 -B 193.${i}.${j}.${k} \
+					-t ip -q
+				((count++))
+			done
+		done
+	done
+
+	tc_check_packets "dev $h2 ingress" 1 $route_count
+	check_err $? "Offload mismatch"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 flower \
+		skip_sw dst_ip 193.0.0.0/8 action drop
+
+	router_routes_destroy
+}
+
+router_cleanup()
+{
+	pre_cleanup
+
+	router_routes_destroy
+	router_destroy
+
+	router_h2_destroy
+	router_h1_destroy
+
+	vrf_cleanup
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh
new file mode 100755
index 000000000..3b75180f4
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh
@@ -0,0 +1,366 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for checking the A-TCAM and C-TCAM operation in Spectrum-2.
+# It tries to exercise as many code paths in the eRP state machine as
+# possible.
+
+lib_dir=$(dirname $0)/../../../../net/forwarding
+
+ALL_TESTS="single_mask_test identical_filters_test two_masks_test \
+	multiple_masks_test ctcam_edge_cases_test"
+NUM_NETIFS=2
+source $lib_dir/tc_common.sh
+source $lib_dir/lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 198.51.100.2/24
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24
+}
+
+single_mask_test()
+{
+	# When only a single mask is required, the device uses the master
+	# mask and not the eRP table. Verify that under this mode the right
+	# filter is matched
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Single filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 198.51.100.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 2
+	check_err $? "Two filters - did not match highest priority"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Two filters - did not match lowest priority"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Single filter - did not match after delete"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "single mask test ($tcflags)"
+}
+
+identical_filters_test()
+{
+	# When two filters that only differ in their priority are used,
+	# one needs to be inserted into the C-TCAM. This test verifies
+	# that filters are correctly spilled to C-TCAM and that the right
+	# filter is matched
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match C-TCAM filter after A-TCAM delete"
+
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match C-TCAM filter after A-TCAM add"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match A-TCAM filter after C-TCAM delete"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "identical filters test ($tcflags)"
+}
+
+two_masks_test()
+{
+	# When more than one mask is required, the eRP table is used. This
+	# test verifies that the eRP table is correctly allocated and used
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.0.0/16 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Two filters - did not match highest priority"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Single filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Two filters - did not match highest priority after add"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "two masks test ($tcflags)"
+}
+
+multiple_masks_test()
+{
+	# The number of masks in a region is limited. Once the maximum
+	# number of masks has been reached filters that require new
+	# masks are spilled to the C-TCAM. This test verifies that
+	# spillage is performed correctly and that the right filter is
+	# matched
+
+	local index
+
+	RET=0
+
+	NUM_MASKS=32
+	BASE_INDEX=100
+
+	for i in $(eval echo {1..$NUM_MASKS}); do
+		index=$((BASE_INDEX - i))
+
+		tc filter add dev $h2 ingress protocol ip pref $index \
+			handle $index \
+			flower $tcflags dst_ip 192.0.2.2/${i} src_ip 192.0.2.1 \
+			action drop
+
+		$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \
+			-B 192.0.2.2 -t ip -q
+
+		tc_check_packets "dev $h2 ingress" $index 1
+		check_err $? "$i filters - did not match highest priority (add)"
+	done
+
+	for i in $(eval echo {$NUM_MASKS..1}); do
+		index=$((BASE_INDEX - i))
+
+		$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \
+			-B 192.0.2.2 -t ip -q
+
+		tc_check_packets "dev $h2 ingress" $index 2
+		check_err $? "$i filters - did not match highest priority (del)"
+
+		tc filter del dev $h2 ingress protocol ip pref $index \
+			handle $index flower
+	done
+
+	log_test "multiple masks test ($tcflags)"
+}
+
+ctcam_two_atcam_masks_test()
+{
+	RET=0
+
+	# First case: C-TCAM is disabled when there are two A-TCAM masks.
+	# We push a filter into the C-TCAM by using two identical filters
+	# as in identical_filters_test()
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.2.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match A-TCAM filter"
+
+	# Delete both A-TCAM and C-TCAM filters and make sure the remaining
+	# A-TCAM filter still works
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "ctcam with two atcam masks test ($tcflags)"
+}
+
+ctcam_one_atcam_mask_test()
+{
+	RET=0
+
+	# Second case: C-TCAM is disabled when there is one A-TCAM mask.
+	# The test is similar to identical_filters_test()
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match C-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "ctcam with one atcam mask test ($tcflags)"
+}
+
+ctcam_no_atcam_masks_test()
+{
+	RET=0
+
+	# Third case: C-TCAM is disabled when there are no A-TCAM masks
+	# This test exercises the code path that transitions the eRP table
+	# to its initial state after deleting the last C-TCAM mask
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "ctcam with no atcam masks test ($tcflags)"
+}
+
+ctcam_edge_cases_test()
+{
+	# When the C-TCAM is disabled after deleting the last C-TCAM
+	# mask, we want to make sure the eRP state machine is put in
+	# the correct state
+
+	ctcam_two_atcam_masks_test
+	ctcam_one_atcam_mask_test
+	ctcam_no_atcam_masks_test
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+if ! tc_offload_check; then
+	check_err 1 "Could not test offloaded functionality"
+	log_test "mlxsw-specific tests for tc flower"
+	exit
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh
new file mode 100644
index 000000000..73035e250
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh
@@ -0,0 +1,119 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+source "../../../../net/forwarding/devlink_lib.sh"
+
+if [ "$DEVLINK_VIDDID" != "15b3:cb84" ]; then
+	echo "SKIP: test is tailored for Mellanox Spectrum"
+	exit 1
+fi
+
+# Needed for returning to default
+declare -A KVD_DEFAULTS
+
+KVD_CHILDREN="linear hash_single hash_double"
+KVDL_CHILDREN="singles chunks large_chunks"
+
+devlink_sp_resource_minimize()
+{
+	local size
+	local i
+
+	for i in $KVD_CHILDREN; do
+		size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]')
+		devlink_resource_size_set "$size" kvd "$i"
+	done
+
+	for i in $KVDL_CHILDREN; do
+		size=$(devlink_resource_get kvd linear "$i" | \
+		       jq '.["size_min"]')
+		devlink_resource_size_set "$size" kvd linear "$i"
+	done
+}
+
+devlink_sp_size_kvd_to_default()
+{
+	local need_reload=0
+	local i
+
+	for i in $KVD_CHILDREN; do
+		local size=$(echo "${KVD_DEFAULTS[kvd_$i]}" | jq '.["size"]')
+		current_size=$(devlink_resource_size_get kvd "$i")
+
+		if [ "$size" -ne "$current_size" ]; then
+			devlink_resource_size_set "$size" kvd "$i"
+			need_reload=1
+		fi
+	done
+
+	for i in $KVDL_CHILDREN; do
+		local size=$(echo "${KVD_DEFAULTS[kvd_linear_$i]}" | \
+			     jq '.["size"]')
+		current_size=$(devlink_resource_size_get kvd linear "$i")
+
+		if [ "$size" -ne "$current_size" ]; then
+			devlink_resource_size_set "$size" kvd linear "$i"
+			need_reload=1
+		fi
+	done
+
+	if [ "$need_reload" -ne "0" ]; then
+		devlink_reload
+	fi
+}
+
+devlink_sp_read_kvd_defaults()
+{
+	local key
+	local i
+
+	KVD_DEFAULTS[kvd]=$(devlink_resource_get "kvd")
+	for i in $KVD_CHILDREN; do
+		key=kvd_$i
+		KVD_DEFAULTS[$key]=$(devlink_resource_get kvd "$i")
+	done
+
+	for i in $KVDL_CHILDREN; do
+		key=kvd_linear_$i
+		KVD_DEFAULTS[$key]=$(devlink_resource_get kvd linear "$i")
+	done
+}
+
+KVD_PROFILES="default scale ipv4_max"
+
+devlink_sp_resource_kvd_profile_set()
+{
+	local profile=$1
+
+	case "$profile" in
+	scale)
+		devlink_resource_size_set 64000 kvd linear
+		devlink_resource_size_set 15616 kvd linear singles
+		devlink_resource_size_set 32000 kvd linear chunks
+		devlink_resource_size_set 16384 kvd linear large_chunks
+		devlink_resource_size_set 128000 kvd hash_single
+		devlink_resource_size_set 48000 kvd hash_double
+		devlink_reload
+		;;
+	ipv4_max)
+		devlink_resource_size_set 64000 kvd linear
+		devlink_resource_size_set 15616 kvd linear singles
+		devlink_resource_size_set 32000 kvd linear chunks
+		devlink_resource_size_set 16384 kvd linear large_chunks
+		devlink_resource_size_set 144000 kvd hash_single
+		devlink_resource_size_set 32768 kvd hash_double
+		devlink_reload
+		;;
+	default)
+		devlink_resource_size_set 98304 kvd linear
+		devlink_resource_size_set 16384 kvd linear singles
+		devlink_resource_size_set 49152 kvd linear chunks
+		devlink_resource_size_set 32768 kvd linear large_chunks
+		devlink_resource_size_set 87040 kvd hash_single
+		devlink_resource_size_set 60416 kvd hash_double
+		devlink_reload
+		;;
+	*)
+		check_err 1 "Unknown profile $profile"
+	esac
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh
new file mode 100755
index 000000000..b1fe960e3
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh
@@ -0,0 +1,117 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NUM_NETIFS=1
+source devlink_lib_spectrum.sh
+
+setup_prepare()
+{
+	devlink_sp_read_kvd_defaults
+}
+
+cleanup()
+{
+	pre_cleanup
+	devlink_sp_size_kvd_to_default
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+profiles_test()
+{
+	local i
+
+	log_info "Running profile tests"
+
+	for i in $KVD_PROFILES; do
+		RET=0
+		devlink_sp_resource_kvd_profile_set $i
+		log_test "'$i' profile"
+	done
+
+	# Default is explicitly tested at end to ensure it's actually applied
+	RET=0
+	devlink_sp_resource_kvd_profile_set "default"
+	log_test "'default' profile"
+}
+
+resources_min_test()
+{
+	local size
+	local i
+	local j
+
+	log_info "Running KVD-minimum tests"
+
+	for i in $KVD_CHILDREN; do
+		RET=0
+		size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]')
+		devlink_resource_size_set "$size" kvd "$i"
+
+		# In case of linear, need to minimize sub-resources as well
+		if [[ "$i" == "linear" ]]; then
+			for j in $KVDL_CHILDREN; do
+				devlink_resource_size_set 0 kvd linear "$j"
+			done
+		fi
+
+		devlink_reload
+		devlink_sp_size_kvd_to_default
+		log_test "'$i' minimize [$size]"
+	done
+}
+
+resources_max_test()
+{
+	local min_size
+	local size
+	local i
+	local j
+
+	log_info "Running KVD-maximum tests"
+	for i in $KVD_CHILDREN; do
+		RET=0
+		devlink_sp_resource_minimize
+
+		# Calculate the maximum possible size for the given partition
+		size=$(devlink_resource_size_get kvd)
+		for j in $KVD_CHILDREN; do
+			if [ "$i" != "$j" ]; then
+				min_size=$(devlink_resource_get kvd "$j" | \
+					   jq '.["size_min"]')
+				size=$((size - min_size))
+			fi
+		done
+
+		# Test almost maximum size
+		devlink_resource_size_set "$((size - 128))" kvd "$i"
+		devlink_reload
+		log_test "'$i' almost maximize [$((size - 128))]"
+
+		# Test above maximum size
+		devlink resource set "$DEVLINK_DEV" \
+			path "kvd/$i" size $((size + 128)) &> /dev/null
+		check_fail $? "Set kvd/$i to size $((size + 128)) should fail"
+		log_test "'$i' Overflow rejection [$((size + 128))]"
+
+		# Test maximum size
+		if [ "$i" == "hash_single" ] || [ "$i" == "hash_double" ]; then
+			echo "SKIP: Observed problem with exact max $i"
+			continue
+		fi
+
+		devlink_resource_size_set "$size" kvd "$i"
+		devlink_reload
+		log_test "'$i' maximize [$size]"
+
+		devlink_sp_size_kvd_to_default
+	done
+}
+
+profiles_test
+resources_min_test
+resources_max_test
+
+exit "$RET"
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh
new file mode 100644
index 000000000..8d2186c7c
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../mirror_gre_scale.sh
+
+mirror_gre_get_target()
+{
+	local should_fail=$1; shift
+
+	if ((! should_fail)); then
+		echo 3
+	else
+		echo 4
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
new file mode 100755
index 000000000..a0a80e1a6
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
@@ -0,0 +1,55 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NUM_NETIFS=6
+source ../../../../net/forwarding/lib.sh
+source ../../../../net/forwarding/tc_common.sh
+source devlink_lib_spectrum.sh
+
+current_test=""
+
+cleanup()
+{
+	pre_cleanup
+	if [ ! -z $current_test ]; then
+		${current_test}_cleanup
+	fi
+	devlink_sp_size_kvd_to_default
+}
+
+devlink_sp_read_kvd_defaults
+trap cleanup EXIT
+
+ALL_TESTS="router tc_flower mirror_gre"
+for current_test in ${TESTS:-$ALL_TESTS}; do
+	source ${current_test}_scale.sh
+
+	num_netifs_var=${current_test^^}_NUM_NETIFS
+	num_netifs=${!num_netifs_var:-$NUM_NETIFS}
+
+	for profile in $KVD_PROFILES; do
+		RET=0
+		devlink_sp_resource_kvd_profile_set $profile
+		if [[ $RET -gt 0 ]]; then
+			log_test "'$current_test' [$profile] setting"
+			continue
+		fi
+
+		for should_fail in 0 1; do
+			RET=0
+			target=$(${current_test}_get_target "$should_fail")
+			${current_test}_setup_prepare
+			setup_wait $num_netifs
+			${current_test}_test "$target" "$should_fail"
+			${current_test}_cleanup
+			if [[ "$should_fail" -eq 0 ]]; then
+				log_test "'$current_test' [$profile] $target"
+			else
+				log_test "'$current_test' [$profile] overflow $target"
+			fi
+		done
+	done
+done
+current_test=""
+
+exit "$RET"
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh
new file mode 100644
index 000000000..21c4697d5
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../router_scale.sh
+
+router_get_target()
+{
+	local should_fail=$1
+	local target
+
+	target=$(devlink_resource_size_get kvd hash_single)
+
+	if [[ $should_fail -eq 0 ]]; then
+		target=$((target * 85 / 100))
+	else
+		target=$((target + 1))
+	fi
+
+	echo $target
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh
new file mode 100644
index 000000000..f9bfd8937
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../tc_flower_scale.sh
+
+tc_flower_get_target()
+{
+	local should_fail=$1; shift
+
+	# 6144 (6x1024) is the theoretical maximum.
+	# One bank of 512 rules is taken by the 18-byte MC router rule.
+	# One rule is the ACL catch-all.
+	# 6144 - 512 - 1 = 5631
+	local target=5631
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh
new file mode 100644
index 000000000..a6d733d2a
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh
@@ -0,0 +1,134 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for resource limit of offloaded flower rules. The test adds a given
+# number of flower matches for different IPv6 addresses, then generates traffic,
+# and ensures each was hit exactly once. This file contains functions to set up
+# a testing topology and run the test, and is meant to be sourced from a test
+# script that calls the testing routine with a given number of rules.
+
+TC_FLOWER_NUM_NETIFS=2
+
+tc_flower_h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+}
+
+tc_flower_h1_destroy()
+{
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+tc_flower_h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+}
+
+tc_flower_h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+tc_flower_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	vrf_prepare
+
+	tc_flower_h1_create
+	tc_flower_h2_create
+}
+
+tc_flower_cleanup()
+{
+	pre_cleanup
+
+	tc_flower_h2_destroy
+	tc_flower_h1_destroy
+
+	vrf_cleanup
+
+	if [[ -v TC_FLOWER_BATCH_FILE ]]; then
+		rm -f $TC_FLOWER_BATCH_FILE
+	fi
+}
+
+tc_flower_addr()
+{
+	local num=$1; shift
+
+	printf "2001:db8:1::%x" $num
+}
+
+tc_flower_rules_create()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	TC_FLOWER_BATCH_FILE="$(mktemp)"
+
+	for ((i = 0; i < count; ++i)); do
+		cat >> $TC_FLOWER_BATCH_FILE <<-EOF
+			filter add dev $h2 ingress \
+				prot ipv6 \
+				pref 1000 \
+				flower $tcflags dst_ip $(tc_flower_addr $i) \
+				action drop
+		EOF
+	done
+
+	tc -b $TC_FLOWER_BATCH_FILE
+	check_err_fail $should_fail $? "Rule insertion"
+}
+
+__tc_flower_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+	local last=$((count - 1))
+
+	tc_flower_rules_create $count $should_fail
+
+	for ((i = 0; i < count; ++i)); do
+		$MZ $h1 -q -c 1 -t ip -p 20 -b bc -6 \
+			-A 2001:db8:2::1 \
+			-B $(tc_flower_addr $i)
+	done
+
+	MISMATCHES=$(
+		tc -j -s filter show dev $h2 ingress |
+		jq -r '[ .[] | select(.kind == "flower") | .options |
+		         values as $rule | .actions[].stats.packets |
+		         select(. != 1) | "\(.) on \($rule.keys.dst_ip)" ] |
+		       join(", ")'
+	)
+
+	test -z "$MISMATCHES"
+	check_err $? "Expected to capture 1 packet for each IP, but got $MISMATCHES"
+}
+
+tc_flower_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	# We use lower 16 bits of IPv6 address for match. Also there are only 16
+	# bits of rule priority space.
+	if ((count > 65536)); then
+		check_err 1 "Invalid count of $count. At most 65536 rules supported"
+		return
+	fi
+
+	if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then
+		check_err 1 "Could not test offloaded functionality"
+		return
+	fi
+
+	tcflags="skip_sw"
+	__tc_flower_test $count $should_fail
+}
diff --git a/tools/testing/selftests/drivers/usb/usbip/usbip_test.sh b/tools/testing/selftests/drivers/usb/usbip/usbip_test.sh
new file mode 100755
index 000000000..128f0ab24
--- /dev/null
+++ b/tools/testing/selftests/drivers/usb/usbip/usbip_test.sh
@@ -0,0 +1,200 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+usage() { echo "usbip_test.sh -b <busid> -p <usbip tools path>"; exit 1; }
+
+while getopts "h:b:p:" arg; do
+    case "${arg}" in
+	h)
+	    usage
+	    ;;
+	b)
+	    busid=${OPTARG}
+	    ;;
+	p)
+	    tools_path=${OPTARG}
+	    ;;
+	*)
+	    usage
+	    ;;
+    esac
+done
+shift $((OPTIND-1))
+
+if [ -z "${busid}" ]; then
+	usage
+fi
+
+echo "Running USB over IP Testing on $busid";
+
+test_end_msg="End of USB over IP Testing on $busid"
+
+if [ $UID != 0 ]; then
+	echo "Please run usbip_test as root [SKIP]"
+	echo $test_end_msg
+	exit $ksft_skip
+fi
+
+echo "Load usbip_host module"
+if ! /sbin/modprobe -q -n usbip_host; then
+	echo "usbip_test: module usbip_host is not found [SKIP]"
+	echo $test_end_msg
+	exit $ksft_skip
+fi
+
+if /sbin/modprobe -q usbip_host; then
+	echo "usbip_test: module usbip_host is loaded [OK]"
+else
+	echo "usbip_test: module usbip_host failed to load [FAIL]"
+	echo $test_end_msg
+	exit 1
+fi
+
+echo "Load vhci_hcd module"
+if /sbin/modprobe -q vhci_hcd; then
+	echo "usbip_test: module vhci_hcd is loaded [OK]"
+else
+	echo "usbip_test: module vhci_hcd failed to load [FAIL]"
+	echo $test_end_msg
+	exit 1
+fi
+echo "=============================================================="
+
+cd $tools_path;
+
+if [ ! -f src/usbip ]; then
+	echo "Please build usbip tools"
+	echo $test_end_msg
+	exit $ksft_skip
+fi
+
+echo "Expect to see export-able devices";
+src/usbip list -l;
+echo "=============================================================="
+
+echo "Run lsusb to see all usb devices"
+lsusb -t;
+echo "=============================================================="
+
+src/usbipd -D;
+
+echo "Get exported devices from localhost - expect to see none";
+src/usbip list -r localhost;
+echo "=============================================================="
+
+echo "bind devices";
+src/usbip bind -b $busid;
+echo "=============================================================="
+
+echo "Run lsusb - bound devices should be under usbip_host control"
+lsusb -t;
+echo "=============================================================="
+
+echo "bind devices - expect already bound messages"
+src/usbip bind -b $busid;
+echo "=============================================================="
+
+echo "Get exported devices from localhost - expect to see exported devices";
+src/usbip list -r localhost;
+echo "=============================================================="
+
+echo "unbind devices";
+src/usbip unbind -b $busid;
+echo "=============================================================="
+
+echo "Run lsusb - bound devices should be rebound to original drivers"
+lsusb -t;
+echo "=============================================================="
+
+echo "unbind devices - expect no devices bound message";
+src/usbip unbind -b $busid;
+echo "=============================================================="
+
+echo "Get exported devices from localhost - expect to see none";
+src/usbip list -r localhost;
+echo "=============================================================="
+
+echo "List imported devices - expect to see none";
+src/usbip port;
+echo "=============================================================="
+
+echo "Import devices from localhost - should fail with no devices"
+src/usbip attach -r localhost -b $busid;
+echo "=============================================================="
+
+echo "bind devices";
+src/usbip bind -b $busid;
+echo "=============================================================="
+
+echo "List imported devices - expect to see exported devices";
+src/usbip list -r localhost;
+echo "=============================================================="
+
+echo "List imported devices - expect to see none";
+src/usbip port;
+echo "=============================================================="
+
+echo "Import devices from localhost - should work"
+src/usbip attach -r localhost -b $busid;
+echo "=============================================================="
+
+# Wait for sysfs file to be updated. Without this sleep, usbip port
+# shows no imported devices.
+sleep 3;
+
+echo "List imported devices - expect to see imported devices";
+src/usbip port;
+echo "=============================================================="
+
+echo "Import devices from localhost - expect already imported messages"
+src/usbip attach -r localhost -b $busid;
+echo "=============================================================="
+
+echo "Un-import devices";
+src/usbip detach -p 00;
+src/usbip detach -p 01;
+echo "=============================================================="
+
+echo "List imported devices - expect to see none";
+src/usbip port;
+echo "=============================================================="
+
+echo "Un-import devices - expect no devices to detach messages";
+src/usbip detach -p 00;
+src/usbip detach -p 01;
+echo "=============================================================="
+
+echo "Detach invalid port tests - expect invalid port error message";
+src/usbip detach -p 100;
+echo "=============================================================="
+
+echo "Expect to see export-able devices";
+src/usbip list -l;
+echo "=============================================================="
+
+echo "Remove usbip_host module";
+rmmod usbip_host;
+
+echo "Run lsusb - bound devices should be rebound to original drivers"
+lsusb -t;
+echo "=============================================================="
+
+echo "Run bind without usbip_host - expect fail"
+src/usbip bind -b $busid;
+echo "=============================================================="
+
+echo "Run lsusb - devices that failed to bind aren't bound to any driver"
+lsusb -t;
+echo "=============================================================="
+
+echo "modprobe usbip_host - does it work?"
+/sbin/modprobe usbip_host
+echo "Should see -busid- is not in match_busid table... skip! dmesg"
+echo "=============================================================="
+dmesg | grep "is not in match_busid table"
+echo "=============================================================="
+
+echo $test_end_msg