diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/PCI/endpoint/pci-test-function.txt | 87 |
1 files changed, 87 insertions, 0 deletions
diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.txt new file mode 100644 index 000000000..5916f1f59 --- /dev/null +++ b/Documentation/PCI/endpoint/pci-test-function.txt @@ -0,0 +1,87 @@ + PCI TEST + Kishon Vijay Abraham I <kishon@ti.com> + +Traditionally PCI RC has always been validated by using standard +PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards. +However with the addition of EP-core in linux kernel, it is possible +to configure a PCI controller that can operate in EP mode to work as +a test device. + +The PCI endpoint test device is a virtual device (defined in software) +used to test the endpoint functionality and serve as a sample driver +for other PCI endpoint devices (to use the EP framework). + +The PCI endpoint test device has the following registers: + + 1) PCI_ENDPOINT_TEST_MAGIC + 2) PCI_ENDPOINT_TEST_COMMAND + 3) PCI_ENDPOINT_TEST_STATUS + 4) PCI_ENDPOINT_TEST_SRC_ADDR + 5) PCI_ENDPOINT_TEST_DST_ADDR + 6) PCI_ENDPOINT_TEST_SIZE + 7) PCI_ENDPOINT_TEST_CHECKSUM + 8) PCI_ENDPOINT_TEST_IRQ_TYPE + 9) PCI_ENDPOINT_TEST_IRQ_NUMBER + +*) PCI_ENDPOINT_TEST_MAGIC + +This register will be used to test BAR0. A known pattern will be written +and read back from MAGIC register to verify BAR0. + +*) PCI_ENDPOINT_TEST_COMMAND: + +This register will be used by the host driver to indicate the function +that the endpoint device must perform. + +Bitfield Description: + Bit 0 : raise legacy IRQ + Bit 1 : raise MSI IRQ + Bit 2 : raise MSI-X IRQ + Bit 3 : read command (read data from RC buffer) + Bit 4 : write command (write data to RC buffer) + Bit 5 : copy command (copy data from one RC buffer to another + RC buffer) + +*) PCI_ENDPOINT_TEST_STATUS + +This register reflects the status of the PCI endpoint device. + +Bitfield Description: + Bit 0 : read success + Bit 1 : read fail + Bit 2 : write success + Bit 3 : write fail + Bit 4 : copy success + Bit 5 : copy fail + Bit 6 : IRQ raised + Bit 7 : source address is invalid + Bit 8 : destination address is invalid + +*) PCI_ENDPOINT_TEST_SRC_ADDR + +This register contains the source address (RC buffer address) for the +COPY/READ command. + +*) PCI_ENDPOINT_TEST_DST_ADDR + +This register contains the destination address (RC buffer address) for +the COPY/WRITE command. + +*) PCI_ENDPOINT_TEST_IRQ_TYPE + +This register contains the interrupt type (Legacy/MSI) triggered +for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands. + +Possible types: + - Legacy : 0 + - MSI : 1 + - MSI-X : 2 + +*) PCI_ENDPOINT_TEST_IRQ_NUMBER + +This register contains the triggered ID interrupt. + +Admissible values: + - Legacy : 0 + - MSI : [1 .. 32] + - MSI-X : [1 .. 2048] |