1 files changed, 36 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
new file mode 100644
index 000000000..fee849d5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
@@ -0,0 +1,36 @@
+* Clock bindings for Freescale i.MX6 SLL
+
+Required properties:
+- compatible: Should be "fsl,imx6sll-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+  entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
+for the full list of i.MX6 SLL clock IDs.
+
+Examples:
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+
+clks: clock-controller@20c4000 {
+		compatible = "fsl,imx6sll-ccm";
+		reg = <0x020c4000 0x4000>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+		#clock-cells = <1>;
+		clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+		clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+};
+
+uart1: serial@2020000 {
+		compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+		reg = <0x02020000 0x4000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+			 <&clks IMX6SLL_CLK_UART1_SERIAL>;
+		clock-names = "ipg", "per";
+};