diff options
Diffstat (limited to 'Documentation/devicetree/bindings/firmware')
4 files changed, 189 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/firmware/coreboot.txt b/Documentation/devicetree/bindings/firmware/coreboot.txt new file mode 100644 index 000000000..4c955703c --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/coreboot.txt @@ -0,0 +1,33 @@ +COREBOOT firmware information + +The device tree node to communicate the location of coreboot's memory-resident +bookkeeping structures to the kernel. Since coreboot itself cannot boot a +device-tree-based kernel (yet), this node needs to be inserted by a +second-stage bootloader (a coreboot "payload"). + +Required properties: + - compatible: Should be "coreboot" + - reg: Address and length of the following two memory regions, in order: + 1.) The coreboot table. This is a list of variable-sized descriptors + that contain various compile- and run-time generated firmware + parameters. It is identified by the magic string "LBIO" in its first + four bytes. + See coreboot's src/commonlib/include/commonlib/coreboot_tables.h for + details. + 2.) The CBMEM area. This is a downward-growing memory region used by + coreboot to dynamically allocate data structures that remain resident. + It may or may not include the coreboot table as one of its members. It + is identified by a root node descriptor with the magic number + 0xc0389481 that resides in the topmost 8 bytes of the area. + See coreboot's src/include/imd.h for details. + +Example: + firmware { + ranges; + + coreboot { + compatible = "coreboot"; + reg = <0xfdfea000 0x264>, + <0xfdfea000 0x16000>; + } + }; diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt new file mode 100644 index 000000000..c248cd44f --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt @@ -0,0 +1,15 @@ +* Amlogic Secure Monitor + +In the Amlogic SoCs the Secure Monitor code is used to provide access to the +NVMEM, enable JTAG, set USB boot, etc... + +Required properties for the secure monitor node: +- compatible: Should be "amlogic,meson-gxbb-sm" + +Example: + + firmware { + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + }; diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt new file mode 100644 index 000000000..0c10802c8 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt @@ -0,0 +1,108 @@ +NVIDIA Tegra Boot and Power Management Processor (BPMP) + +The BPMP is a specific processor in Tegra chip, which is designed for +booting process handling and offloading the power management, clock +management, and reset control tasks from the CPU. The binding document +defines the resources that would be used by the BPMP firmware driver, +which can create the interprocessor communication (IPC) between the CPU +and BPMP. + +Required properties: +- name : Should be bpmp +- compatible + Array of strings + One of: + - "nvidia,tegra186-bpmp" +- mboxes : The phandle of mailbox controller and the mailbox specifier. +- shmem : List of the phandle of the TX and RX shared memory area that + the IPC between CPU and BPMP is based on. +- #clock-cells : Should be 1. +- #power-domain-cells : Should be 1. +- #reset-cells : Should be 1. + +This node is a mailbox consumer. See the following files for details of +the mailbox subsystem, and the specifiers implemented by the relevant +provider(s): + +- .../mailbox/mailbox.txt +- .../mailbox/nvidia,tegra186-hsp.txt + +This node is a clock, power domain, and reset provider. See the following +files for general documentation of those features, and the specifiers +implemented by this node: + +- .../clock/clock-bindings.txt +- <dt-bindings/clock/tegra186-clock.h> +- ../power/power_domain.txt +- <dt-bindings/power/tegra186-powergate.h> +- .../reset/reset.txt +- <dt-bindings/reset/tegra186-reset.h> + +The BPMP implements some services which must be represented by separate nodes. +For example, it can provide access to certain I2C controllers, and the I2C +bindings represent each I2C controller as a device tree node. Such nodes should +be nested directly inside the main BPMP node. + +Software can determine whether a child node of the BPMP node represents a device +by checking for a compatible property. Any node with a compatible property +represents a device that can be instantiated. Nodes without a compatible +property may be used to provide configuration information regarding the BPMP +itself, although no such configuration nodes are currently defined by this +binding. + +The BPMP firmware defines no single global name-/numbering-space for such +services. Put another way, the numbering scheme for I2C buses is distinct from +the numbering scheme for any other service the BPMP may provide (e.g. a future +hypothetical SPI bus service). As such, child device nodes will have no reg +property, and the BPMP node will have no #address-cells or #size-cells property. + +The shared memory bindings for BPMP +----------------------------------- + +The shared memory area for the IPC TX and RX between CPU and BPMP are +predefined and work on top of sysram, which is an SRAM inside the chip. + +See ".../sram/sram.txt" for the bindings. + +Example: + +hsp_top0: hsp@3c00000 { + ... + #mbox-cells = <2>; +}; + +sysram@30000000 { + compatible = "nvidia,tegra186-sysram", "mmio-sram"; + reg = <0x0 0x30000000 0x0 0x50000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>; + + cpu_bpmp_tx: shmem@4e000 { + compatible = "nvidia,tegra186-bpmp-shmem"; + reg = <0x0 0x4e000 0x0 0x1000>; + label = "cpu-bpmp-tx"; + pool; + }; + + cpu_bpmp_rx: shmem@4f000 { + compatible = "nvidia,tegra186-bpmp-shmem"; + reg = <0x0 0x4f000 0x0 0x1000>; + label = "cpu-bpmp-rx"; + pool; + }; +}; + +bpmp { + compatible = "nvidia,tegra186-bpmp"; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>; + shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + + i2c { + compatible = "..."; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt new file mode 100644 index 000000000..fcf6979c0 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -0,0 +1,33 @@ +QCOM Secure Channel Manager (SCM) + +Qualcomm processors include an interface to communicate to the secure firmware. +This interface allows for clients to request different types of actions. These +can include CPU power up/down, HDCP requests, loading of firmware, and other +assorted actions. + +Required properties: +- compatible: must contain one of the following: + * "qcom,scm-apq8064" for APQ8064 platforms + * "qcom,scm-msm8660" for MSM8660 platforms + * "qcom,scm-msm8690" for MSM8690 platforms + * "qcom,scm-msm8996" for MSM8996 platforms + * "qcom,scm-ipq4019" for IPQ4019 platforms + * "qcom,scm" for later processors (MSM8916, APQ8084, MSM8974, etc) +- clocks: One to three clocks may be required based on compatible. + * No clock required for "qcom,scm-msm8996", "qcom,scm-ipq4019" + * Only core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660", and "qcom,scm-msm8960" + * Core, iface, and bus clocks required for "qcom,scm" +- clock-names: Must contain "core" for the core clock, "iface" for the interface + clock and "bus" for the bus clock per the requirements of the compatible. +- qcom,dload-mode: phandle to the TCSR hardware block and offset of the + download mode control register (optional) + +Example for MSM8916: + + firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK> , <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; |