diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/leds/leds-lt3593.txt | 32 |
1 files changed, 32 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-lt3593.txt b/Documentation/devicetree/bindings/leds/leds-lt3593.txt new file mode 100644 index 000000000..6b2cabc36 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lt3593.txt @@ -0,0 +1,32 @@ +Bindings for Linear Technologies LT3593 LED controller + +Required properties: +- compatible: Should be "lltc,lt3593". +- lltc,ctrl-gpios: A handle to the GPIO that is connected to the 'CTRL' + pin of the chip. + +The hardware supports only one LED. The properties of this LED are +configured in a sub-node in the device node. + +Optional sub-node properties: +- label: A label for the LED. If none is given, the LED will be + named "lt3595::". +- linux,default-trigger: The default trigger for the LED. + See Documentation/devicetree/bindings/leds/common.txt +- default-state: The initial state of the LED. + See Documentation/devicetree/bindings/leds/common.txt + +If multiple chips of this type are found in a design, each one needs to +be handled by its own device node. + +Example: + +led-controller { + compatible = "lltc,lt3593"; + lltc,ctrl-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + + led { + label = "white:backlight"; + default-state = "on"; + }; +}; |