diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci/rcar-pci.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/rcar-pci.txt | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt new file mode 100644 index 000000000..a5f7fc62d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -0,0 +1,64 @@ +* Renesas R-Car PCIe interface + +Required properties: +compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; + "renesas,pcie-r8a7779" for the R8A7779 SoC; + "renesas,pcie-r8a7790" for the R8A7790 SoC; + "renesas,pcie-r8a7791" for the R8A7791 SoC; + "renesas,pcie-r8a7793" for the R8A7793 SoC; + "renesas,pcie-r8a7795" for the R8A7795 SoC; + "renesas,pcie-r8a7796" for the R8A7796 SoC; + "renesas,pcie-r8a77980" for the R8A77980 SoC; + "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or + RZ/G1 compatible device. + "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + +- reg: base address and length of the PCIe controller registers. +- #address-cells: set to <3> +- #size-cells: set to <2> +- bus-range: PCI bus numbers covered +- device_type: set to "pci" +- ranges: ranges for the PCI memory and I/O regions. +- dma-ranges: ranges for the inbound memory regions. +- interrupts: two interrupt sources for MSI interrupts, followed by interrupt + source for hardware related interrupts (e.g. link speed change). +- #interrupt-cells: set to <1> +- interrupt-map-mask and interrupt-map: standard PCI properties + to define the mapping of the PCIe interface to interrupt numbers. +- clocks: from common clock binding: clock specifiers for the PCIe controller + and PCIe bus clocks. +- clock-names: from common clock binding: should be "pcie" and "pcie_bus". + +Optional properties: +- phys: from common PHY binding: PHY phandle and specifier (only make sense + for R-Car gen3 SoCs where the PCIe PHYs have their own register blocks). +- phy-names: from common PHY binding: should be "pcie". + +Example: + +SoC-specific DT Entry: + + pcie: pcie@fe000000 { + compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000 + 0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>; + interrupts = <0 116 4>, <0 117 4>, <0 118 4>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 116 4>; + clocks = <&mstp3_clks R8A7791_CLK_PCIE>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + }; |