1 files changed, 134 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
new file mode 100644
index 000000000..728e4193f
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
@@ -0,0 +1,134 @@
+Qualcomm ADSP Peripheral Image Loader
+
+This document defines the binding for a component that loads and boots firmware
+on the Qualcomm ADSP Hexagon core.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,msm8974-adsp-pil"
+		    "qcom,msm8996-adsp-pil"
+		    "qcom,msm8996-slpi-pil"
+
+- interrupts-extended:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must list the watchdog, fatal IRQs ready, handover and
+		    stop-ack IRQs
+
+- interrupt-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the xo clock and optionally aggre2 clock to be
+		    held on behalf of the booting Hexagon core
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "xo" and optionally include "aggre2"
+
+- cx-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the regulator to be held on behalf of the
+		    booting Hexagon core
+
+- px-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the px regulator to be held on behalf of the
+		    booting Hexagon core
+
+- memory-region:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the reserved-memory for the ADSP
+
+- qcom,smem-states:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the smem state for requesting the ADSP to
+		    shut down
+
+- qcom,smem-state-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "stop"
+
+
+= SUBNODES
+The adsp node may have an subnode named either "smd-edge" or "glink-edge" that
+describes the communication edge, channels and devices related to the ADSP.
+See ../soc/qcom/qcom,smd.txt and ../soc/qcom/qcom,glink.txt for details on how
+to describe these.
+
+
+= EXAMPLE
+The following example describes the resources needed to boot control the
+ADSP, as it is found on MSM8974 boards.
+
+	adsp {
+		compatible = "qcom,msm8974-adsp-pil";
+
+		interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog",
+				  "fatal",
+				  "ready",
+				  "handover",
+				  "stop-ack";
+
+		clocks = <&rpmcc RPM_CXO_CLK>;
+		clock-names = "xo";
+
+		cx-supply = <&pm8841_s2>;
+
+		memory-region = <&adsp_region>;
+
+		qcom,smem-states = <&adsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+
+		smd-edge {
+			interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&apcs 8 8>;
+			qcom,smd-edge = <1>;
+		};
+	};
+
+The following example describes the resources needed to boot control the
+SLPI, as it is found on MSM8996 boards.
+
+	slpi {
+		compatible = "qcom,msm8996-slpi-pil";
+		interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
+				      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog",
+				  "fatal",
+				  "ready",
+				  "handover",
+				  "stop-ack";
+
+		clocks = <&rpmcc MSM8996_RPM_SMD_XO_CLK_SRC>,
+		         <&rpmcc MSM8996_RPM_SMD_AGGR2_NOC_CLK>;
+		clock-names = "xo", "aggre2";
+
+		cx-supply = <&pm8994_l26>;
+		px-supply = <&pm8994_lvs2>;
+
+		memory-region = <&slpi_region>;
+		qcom,smem-states = <&slpi_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+        };